10 files changed, 161 insertions, 361 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 9b9656ce37e6..d4ef35aeb579 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -202,9 +202,7 @@ config HID_SENSOR_ACCEL_3D
 
 config IIO_CROS_EC_ACCEL_LEGACY
 	tristate "ChromeOS EC Legacy Accelerometer Sensor"
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
-	select CROS_EC_LPC_REGISTER_DEVICE
+	depends on IIO_CROS_EC_SENSORS_CORE
 	help
 	  Say yes here to get support for accelerometers on Chromebook using
 	  legacy EC firmware.
diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
index ad19d9c716f4..39002cb5605d 100644
--- a/drivers/iio/accel/cros_ec_accel_legacy.c
+++ b/drivers/iio/accel/cros_ec_accel_legacy.c
@@ -5,13 +5,14 @@
  * Copyright 2017 Google, Inc
  *
  * This driver uses the memory mapper cros-ec interface to communicate
- * with the Chrome OS EC about accelerometer data.
+ * with the Chrome OS EC about accelerometer data or older commands.
  * Accelerometer access is presented through iio sysfs.
  */
 
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/trigger_consumer.h>
@@ -25,160 +26,41 @@
 
 #define DRV_NAME	"cros-ec-accel-legacy"
 
+#define CROS_EC_SENSOR_LEGACY_NUM 2
 /*
  * Sensor scale hard coded at 10 bits per g, computed as:
  * g / (2^10 - 1) = 0.009586168; with g = 9.80665 m.s^-2
  */
 #define ACCEL_LEGACY_NSCALE 9586168
 
-/* Indices for EC sensor values. */
-enum {
-	X,
-	Y,
-	Z,
-	MAX_AXIS,
-};
-
-/* State data for cros_ec_accel_legacy iio driver. */
-struct cros_ec_accel_legacy_state {
-	struct cros_ec_device *ec;
-
-	/*
-	 * Array holding data from a single capture. 2 bytes per channel
-	 * for the 3 channels plus the timestamp which is always last and
-	 * 8-bytes aligned.
-	 */
-	s16 capture_data[8];
-	s8 sign[MAX_AXIS];
-	u8 sensor_num;
-};
-
-static int ec_cmd_read_u8(struct cros_ec_device *ec, unsigned int offset,
-			  u8 *dest)
-{
-	return ec->cmd_readmem(ec, offset, 1, dest);
-}
-
-static int ec_cmd_read_u16(struct cros_ec_device *ec, unsigned int offset,
-			   u16 *dest)
-{
-	__le16 tmp;
-	int ret = ec->cmd_readmem(ec, offset, 2, &tmp);
-
-	*dest = le16_to_cpu(tmp);
-
-	return ret;
-}
-
-/**
- * read_ec_until_not_busy() - Read from EC status byte until it reads not busy.
- * @st: Pointer to state information for device.
- *
- * This function reads EC status until its busy bit gets cleared. It does not
- * wait indefinitely and returns -EIO if the EC status is still busy after a
- * few hundreds milliseconds.
- *
- * Return: 8-bit status if ok, -EIO on error
- */
-static int read_ec_until_not_busy(struct cros_ec_accel_legacy_state *st)
-{
-	struct cros_ec_device *ec = st->ec;
-	u8 status;
-	int attempts = 0;
-
-	ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
-	while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) {
-		/* Give up after enough attempts, return error. */
-		if (attempts++ >= 50)
-			return -EIO;
-
-		/* Small delay every so often. */
-		if (attempts % 5 == 0)
-			msleep(25);
-
-		ec_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status);
-	}
-
-	return status;
-}
-
-/**
- * read_ec_accel_data_unsafe() - Read acceleration data from EC shared memory.
- * @st:        Pointer to state information for device.
- * @scan_mask: Bitmap of the sensor indices to scan.
- * @data:      Location to store data.
- *
- * This is the unsafe function for reading the EC data. It does not guarantee
- * that the EC will not modify the data as it is being read in.
- */
-static void read_ec_accel_data_unsafe(struct cros_ec_accel_legacy_state *st,
-				      unsigned long scan_mask, s16 *data)
-{
-	int i = 0;
-	int num_enabled = bitmap_weight(&scan_mask, MAX_AXIS);
-
-	/* Read all sensors enabled in scan_mask. Each value is 2 bytes. */
-	while (num_enabled--) {
-		i = find_next_bit(&scan_mask, MAX_AXIS, i);
-		ec_cmd_read_u16(st->ec,
-				EC_MEMMAP_ACC_DATA +
-				sizeof(s16) *
-				(1 + i + st->sensor_num * MAX_AXIS),
-				data);
-		*data *= st->sign[i];
-		i++;
-		data++;
-	}
-}
-
-/**
- * read_ec_accel_data() - Read acceleration data from EC shared memory.
- * @st:        Pointer to state information for device.
- * @scan_mask: Bitmap of the sensor indices to scan.
- * @data:      Location to store data.
- *
- * This is the safe function for reading the EC data. It guarantees that
- * the data sampled was not modified by the EC while being read.
- *
- * Return: 0 if ok, -ve on error
- */
-static int read_ec_accel_data(struct cros_ec_accel_legacy_state *st,
-			      unsigned long scan_mask, s16 *data)
+static int cros_ec_accel_legacy_read_cmd(struct iio_dev *indio_dev,
+				  unsigned long scan_mask, s16 *data)
 {
-	u8 samp_id = 0xff;
-	u8 status = 0;
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
 	int ret;
-	int attempts = 0;
+	unsigned int i;
+	u8 sensor_num;
 
 	/*
-	 * Continually read all data from EC until the status byte after
-	 * all reads reflects that the EC is not busy and the sample id
-	 * matches the sample id from before all reads. This guarantees
-	 * that data read in was not modified by the EC while reading.
+	 * Read all sensor data through a command.
+	 * Save sensor_num, it is assumed to stay.
 	 */
-	while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT |
-			  EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) {
-		/* If we have tried to read too many times, return error. */
-		if (attempts++ >= 5)
-			return -EIO;
-
-		/* Read status byte until EC is not busy. */
-		ret = read_ec_until_not_busy(st);
-		if (ret < 0)
-			return ret;
-		status = ret;
-
-		/*
-		 * Store the current sample id so that we can compare to the
-		 * sample id after reading the data.
-		 */
-		samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK;
-
-		/* Read all EC data, format it, and store it into data. */
-		read_ec_accel_data_unsafe(st, scan_mask, data);
+	sensor_num = st->param.info.sensor_num;
+	st->param.cmd = MOTIONSENSE_CMD_DUMP;
+	st->param.dump.max_sensor_count = CROS_EC_SENSOR_LEGACY_NUM;
+	ret = cros_ec_motion_send_host_cmd(st,
+			sizeof(st->resp->dump) + CROS_EC_SENSOR_LEGACY_NUM *
+			sizeof(struct ec_response_motion_sensor_data));
+	st->param.info.sensor_num = sensor_num;
+	if (ret != 0) {
+		dev_warn(&indio_dev->dev, "Unable to read sensor data\n");
+		return ret;
+	}
 
-		/* Read status byte. */
-		ec_cmd_read_u8(st->ec, EC_MEMMAP_ACC_STATUS, &status);
+	for_each_set_bit(i, &scan_mask, indio_dev->masklength) {
+		*data = st->resp->dump.sensor[sensor_num].data[i] *
+			st->sign[i];
+		data++;
 	}
 
 	return 0;
@@ -188,28 +70,40 @@ static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev,
 				     struct iio_chan_spec const *chan,
 				     int *val, int *val2, long mask)
 {
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
 	s16 data = 0;
-	int ret = IIO_VAL_INT;
+	int ret;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->cmd_lock);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = read_ec_accel_data(st, (1 << chan->scan_index), &data);
-		if (ret)
-			return ret;
+		ret = st->read_ec_sensors_data(indio_dev, 1 << idx, &data);
+		if (ret < 0)
+			break;
+		ret = IIO_VAL_INT;
 		*val = data;
-		return IIO_VAL_INT;
+		break;
 	case IIO_CHAN_INFO_SCALE:
+		WARN_ON(st->type != MOTIONSENSE_TYPE_ACCEL);
 		*val = 0;
 		*val2 = ACCEL_LEGACY_NSCALE;
-		return IIO_VAL_INT_PLUS_NANO;
+		ret = IIO_VAL_INT_PLUS_NANO;
+		break;
 	case IIO_CHAN_INFO_CALIBBIAS:
 		/* Calibration not supported. */
 		*val = 0;
-		return IIO_VAL_INT;
+		ret = IIO_VAL_INT;
+		break;
 	default:
-		return -EINVAL;
+		ret = cros_ec_sensors_core_read(st, chan, val, val2,
+				mask);
+		break;
 	}
+	mutex_unlock(&st->cmd_lock);
+
+	return ret;
 }
 
 static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev,
@@ -231,86 +125,14 @@ static const struct iio_info cros_ec_accel_legacy_info = {
 	.write_raw = &cros_ec_accel_legacy_write,
 };
 
-/**
- * cros_ec_accel_legacy_capture() - The trigger handler function
- * @irq: The interrupt number.
- * @p:   Private data - always a pointer to the poll func.
- *
- * On a trigger event occurring, if the pollfunc is attached then this
- * handler is called as a threaded interrupt (and hence may sleep). It
- * is responsible for grabbing data from the device and pushing it into
- * the associated buffer.
- *
- * Return: IRQ_HANDLED
+/*
+ * Present the channel using HTML5 standard:
+ * need to invert X and Y and invert some lid axis.
  */
-static irqreturn_t cros_ec_accel_legacy_capture(int irq, void *p)
-{
-	struct iio_poll_func *pf = p;
-	struct iio_dev *indio_dev = pf->indio_dev;
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
-
-	/* Clear capture data. */
-	memset(st->capture_data, 0, sizeof(st->capture_data));
-
-	/*
-	 * Read data based on which channels are enabled in scan mask. Note
-	 * that on a capture we are always reading the calibrated data.
-	 */
-	read_ec_accel_data(st, *indio_dev->active_scan_mask, st->capture_data);
-
-	iio_push_to_buffers_with_timestamp(indio_dev, (void *)st->capture_data,
-					   iio_get_time_ns(indio_dev));
-
-	/*
-	 * Tell the core we are done with this trigger and ready for the
-	 * next one.
-	 */
-	iio_trigger_notify_done(indio_dev->trig);
-
-	return IRQ_HANDLED;
-}
-
-static char *cros_ec_accel_legacy_loc_strings[] = {
-	[MOTIONSENSE_LOC_BASE] = "base",
-	[MOTIONSENSE_LOC_LID] = "lid",
-	[MOTIONSENSE_LOC_MAX] = "unknown",
-};
-
-static ssize_t cros_ec_accel_legacy_loc(struct iio_dev *indio_dev,
-					uintptr_t private,
-					const struct iio_chan_spec *chan,
-					char *buf)
-{
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
-
-	return sprintf(buf, "%s\n",
-		       cros_ec_accel_legacy_loc_strings[st->sensor_num +
-							MOTIONSENSE_LOC_BASE]);
-}
-
-static ssize_t cros_ec_accel_legacy_id(struct iio_dev *indio_dev,
-				       uintptr_t private,
-				       const struct iio_chan_spec *chan,
-				       char *buf)
-{
-	struct cros_ec_accel_legacy_state *st = iio_priv(indio_dev);
-
-	return sprintf(buf, "%d\n", st->sensor_num);
-}
-
-static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = {
-	{
-		.name = "id",
-		.shared = IIO_SHARED_BY_ALL,
-		.read = cros_ec_accel_legacy_id,
-	},
-	{
-		.name = "location",
-		.shared = IIO_SHARED_BY_ALL,
-		.read = cros_ec_accel_legacy_loc,
-	},
-	{ }
-};
+#define CROS_EC_ACCEL_ROTATE_AXIS(_axis)				\
+	((_axis) == CROS_EC_SENSOR_Z ? CROS_EC_SENSOR_Z :		\
+	 ((_axis) == CROS_EC_SENSOR_X ? CROS_EC_SENSOR_Y :		\
+	  CROS_EC_SENSOR_X))
 
 #define CROS_EC_ACCEL_LEGACY_CHAN(_axis)				\
 	{								\
@@ -321,28 +143,28 @@ static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = {
 			BIT(IIO_CHAN_INFO_RAW) |			\
 			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE),	\
-		.ext_info = cros_ec_accel_legacy_ext_info,		\
+		.ext_info = cros_ec_sensors_ext_info,			\
 		.scan_type = {						\
 			.sign = 's',					\
-			.realbits = 16,					\
-			.storagebits = 16,				\
+			.realbits = CROS_EC_SENSOR_BITS,		\
+			.storagebits = CROS_EC_SENSOR_BITS,		\
 		},							\
+		.scan_index = CROS_EC_ACCEL_ROTATE_AXIS(_axis),		\
 	}								\
 
-static struct iio_chan_spec ec_accel_channels[] = {
-	CROS_EC_ACCEL_LEGACY_CHAN(X),
-	CROS_EC_ACCEL_LEGACY_CHAN(Y),
-	CROS_EC_ACCEL_LEGACY_CHAN(Z),
-	IIO_CHAN_SOFT_TIMESTAMP(MAX_AXIS)
+static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = {
+		CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_X),
+		CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Y),
+		CROS_EC_ACCEL_LEGACY_CHAN(CROS_EC_SENSOR_Z),
+		IIO_CHAN_SOFT_TIMESTAMP(CROS_EC_SENSOR_MAX_AXIS)
 };
 
 static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct cros_ec_dev *ec = dev_get_drvdata(dev->parent);
-	struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
 	struct iio_dev *indio_dev;
-	struct cros_ec_accel_legacy_state *state;
+	struct cros_ec_sensors_core_state *state;
 	int ret;
 
 	if (!ec || !ec->ec_dev) {
@@ -350,46 +172,32 @@ static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (!ec->ec_dev->cmd_readmem) {
-		dev_warn(&pdev->dev, "EC does not support direct reads.\n");
-		return -EINVAL;
-	}
-
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
 	if (!indio_dev)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, indio_dev);
-	state = iio_priv(indio_dev);
-	state->ec = ec->ec_dev;
-	state->sensor_num = sensor_platform->sensor_num;
-
-	indio_dev->dev.parent = dev;
-	indio_dev->name = pdev->name;
-	indio_dev->channels = ec_accel_channels;
-	/*
-	 * Present the channel using HTML5 standard:
-	 * need to invert X and Y and invert some lid axis.
-	 */
-	ec_accel_channels[X].scan_index = Y;
-	ec_accel_channels[Y].scan_index = X;
-	ec_accel_channels[Z].scan_index = Z;
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	if (ret)
+		return ret;
 
-	state->sign[Y] = 1;
+	indio_dev->info = &cros_ec_accel_legacy_info;
+	state = iio_priv(indio_dev);
 
-	if (state->sensor_num == MOTIONSENSE_LOC_LID)
-		state->sign[X] = state->sign[Z] = -1;
+	if (state->ec->cmd_readmem != NULL)
+		state->read_ec_sensors_data = cros_ec_sensors_read_lpc;
 	else
-		state->sign[X] = state->sign[Z] = 1;
-
-	indio_dev->num_channels = ARRAY_SIZE(ec_accel_channels);
-	indio_dev->dev.parent = &pdev->dev;
-	indio_dev->info = &cros_ec_accel_legacy_info;
-	indio_dev->modes = INDIO_DIRECT_MODE;
+		state->read_ec_sensors_data = cros_ec_accel_legacy_read_cmd;
+
+	indio_dev->channels = cros_ec_accel_legacy_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cros_ec_accel_legacy_channels);
+	/* The lid sensor needs to be presented inverted. */
+	if (state->loc == MOTIONSENSE_LOC_LID) {
+		state->sign[CROS_EC_SENSOR_X] = -1;
+		state->sign[CROS_EC_SENSOR_Z] = -1;
+	}
 
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
-					      cros_ec_accel_legacy_capture,
-					      NULL);
+			cros_ec_sensors_capture, NULL);
 	if (ret)
 		return ret;
 
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 6645771aa349..fee535d6e45b 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1486,8 +1486,8 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KIOX0008", KXCJ91008},
 	{"KIOX0009", KXTJ21009},
 	{"KIOX000A", KXCJ91008},
-	{"KIOX010A", KXCJ91008}, /* KXCJ91008 inside the display of a 2-in-1 */
-	{"KIOX020A", KXCJ91008},
+	{"KIOX010A", KXCJ91008}, /* KXCJ91008 in the display of a yoga 2-in-1 */
+	{"KIOX020A", KXCJ91008}, /* KXCJ91008 in the base of a yoga 2-in-1 */
 	{"KXTJ1009", KXTJ21009},
 	{"KXJ2109",  KXTJ21009},
 	{"SMO8500",  KXCJ91008},
diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c
index 637e6e676061..3d5bea651923 100644
--- a/drivers/iio/accel/mxc4005.c
+++ b/drivers/iio/accel/mxc4005.c
@@ -424,7 +424,7 @@ static int mxc4005_probe(struct i2c_client *client,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &mxc4005_info;
 
-	ret = iio_triggered_buffer_setup(indio_dev,
+	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
 					 iio_pollfunc_store_time,
 					 mxc4005_trigger_handler,
 					 NULL);
@@ -452,7 +452,7 @@ static int mxc4005_probe(struct i2c_client *client,
 		if (ret) {
 			dev_err(&client->dev,
 				"failed to init threaded irq\n");
-			goto err_buffer_cleanup;
+			return ret;
 		}
 
 		data->dready_trig->dev.parent = &client->dev;
@@ -460,43 +460,16 @@ static int mxc4005_probe(struct i2c_client *client,
 		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
 		indio_dev->trig = data->dready_trig;
 		iio_trigger_get(indio_dev->trig);
-		ret = iio_trigger_register(data->dready_trig);
+		ret = devm_iio_trigger_register(&client->dev,
+						data->dready_trig);
 		if (ret) {
 			dev_err(&client->dev,
 				"failed to register trigger\n");
-			goto err_trigger_unregister;
+			return ret;
 		}
 	}
 
-	ret = iio_device_register(indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev,
-			"unable to register iio device %d\n", ret);
-		goto err_buffer_cleanup;
-	}
-
-	return 0;
-
-err_trigger_unregister:
-	iio_trigger_unregister(data->dready_trig);
-err_buffer_cleanup:
-	iio_triggered_buffer_cleanup(indio_dev);
-
-	return ret;
-}
-
-static int mxc4005_remove(struct i2c_client *client)
-{
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct mxc4005_data *data = iio_priv(indio_dev);
-
-	iio_device_unregister(indio_dev);
-
-	iio_triggered_buffer_cleanup(indio_dev);
-	if (data->dready_trig)
-		iio_trigger_unregister(data->dready_trig);
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 static const struct acpi_device_id mxc4005_acpi_match[] = {
@@ -517,7 +490,6 @@ static struct i2c_driver mxc4005_driver = {
 		.acpi_match_table = ACPI_PTR(mxc4005_acpi_match),
 	},
 	.probe		= mxc4005_probe,
-	.remove		= mxc4005_remove,
 	.id_table	= mxc4005_id,
 };
 
diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
index a923f90f6e80..66d768d971e1 100644
--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -111,7 +111,7 @@
 /* Currently unsupported */
 #define SCA3000_MD_CTRL_AND_Y				BIT(3)
 #define SCA3000_MD_CTRL_AND_X				BIT(4)
-#define SAC3000_MD_CTRL_AND_Z				BIT(5)
+#define SCA3000_MD_CTRL_AND_Z				BIT(5)
 
 /*
  * Some control registers of complex access methods requiring this register to
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 979ab9679b99..af09943f38c9 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -68,6 +68,7 @@ static const struct st_sensors_platform_data default_accel_pdata = {
 	.drdy_int_pin = 1,
 };
 
+const struct st_sensor_settings *st_accel_get_settings(const char *name);
 int st_accel_common_probe(struct iio_dev *indio_dev);
 void st_accel_common_remove(struct iio_dev *indio_dev);
 
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index 0205c0167cdd..9f2b40474b8e 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -29,65 +29,51 @@ int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
 	return st_sensors_set_dataready_irq(indio_dev, state);
 }
 
-static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
-{
-	return st_sensors_set_enable(indio_dev, true);
-}
-
 static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 {
 	int err;
-	struct st_sensor_data *adata = iio_priv(indio_dev);
-
-	adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
-	if (adata->buffer_data == NULL) {
-		err = -ENOMEM;
-		goto allocate_memory_error;
-	}
 
 	err = iio_triggered_buffer_postenable(indio_dev);
 	if (err < 0)
-		goto st_accel_buffer_postenable_error;
+		return err;
 
 	err = st_sensors_set_axis_enable(indio_dev,
-					(u8)indio_dev->active_scan_mask[0]);
+					 (u8)indio_dev->active_scan_mask[0]);
 	if (err < 0)
-		goto st_sensors_set_axis_enable_error;
+		goto st_accel_buffer_predisable;
 
-	return err;
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_accel_buffer_enable_all_axis;
 
-st_sensors_set_axis_enable_error:
+	return 0;
+
+st_accel_buffer_enable_all_axis:
+	st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+st_accel_buffer_predisable:
 	iio_triggered_buffer_predisable(indio_dev);
-st_accel_buffer_postenable_error:
-	kfree(adata->buffer_data);
-allocate_memory_error:
 	return err;
 }
 
 static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
 {
 	int err, err2;
-	struct st_sensor_data *adata = iio_priv(indio_dev);
-
-	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
-	if (err < 0)
-		goto st_accel_buffer_predisable_error;
 
 	err = st_sensors_set_enable(indio_dev, false);
 	if (err < 0)
-		goto st_accel_buffer_predisable_error;
+		goto st_accel_buffer_predisable;
+
+	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 
-st_accel_buffer_predisable_error:
+st_accel_buffer_predisable:
 	err2 = iio_triggered_buffer_predisable(indio_dev);
 	if (!err)
 		err = err2;
 
-	kfree(adata->buffer_data);
 	return err;
 }
 
 static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
-	.preenable = &st_accel_buffer_preenable,
 	.postenable = &st_accel_buffer_postenable,
 	.predisable = &st_accel_buffer_predisable,
 };
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index e02b79931979..2e37f8a6d8cf 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -13,7 +13,6 @@
 #include <linux/acpi.h>
 #include <linux/errno.h>
 #include <linux/types.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
@@ -1147,32 +1146,45 @@ out:
 #endif
 }
 
+/*
+ * st_accel_get_settings() - get sensor settings from device name
+ * @name: device name buffer reference.
+ *
+ * Return: valid reference on success, NULL otherwise.
+ */
+const struct st_sensor_settings *st_accel_get_settings(const char *name)
+{
+	int index = st_sensors_get_settings_index(name,
+					st_accel_sensors_settings,
+					ARRAY_SIZE(st_accel_sensors_settings));
+	if (index < 0)
+		return NULL;
+
+	return &st_accel_sensors_settings[index];
+}
+EXPORT_SYMBOL(st_accel_get_settings);
+
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 	struct st_sensors_platform_data *pdata =
 		(struct st_sensors_platform_data *)adata->dev->platform_data;
-	int irq = adata->get_irq_data_ready(indio_dev);
 	struct iio_chan_spec *channels;
 	size_t channels_size;
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &accel_info;
-	mutex_init(&adata->tb.buf_lock);
 
 	err = st_sensors_power_enable(indio_dev);
 	if (err)
 		return err;
 
-	err = st_sensors_check_device_support(indio_dev,
-					ARRAY_SIZE(st_accel_sensors_settings),
-					st_accel_sensors_settings);
+	err = st_sensors_verify_id(indio_dev);
 	if (err < 0)
 		goto st_accel_power_off;
 
 	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
-	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	channels_size = indio_dev->num_channels * sizeof(struct iio_chan_spec);
@@ -1204,7 +1216,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 	if (err < 0)
 		goto st_accel_power_off;
 
-	if (irq > 0) {
+	if (adata->irq > 0) {
 		err = st_sensors_allocate_trigger(indio_dev,
 						 ST_ACCEL_TRIGGER_OPS);
 		if (err < 0)
@@ -1221,7 +1233,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 	return 0;
 
 st_accel_device_register_error:
-	if (irq > 0)
+	if (adata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 st_accel_probe_trigger_error:
 	st_accel_deallocate_ring(indio_dev);
@@ -1239,7 +1251,7 @@ void st_accel_common_remove(struct iio_dev *indio_dev)
 	st_sensors_power_disable(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	if (adata->get_irq_data_ready(indio_dev) > 0)
+	if (adata->irq > 0)
 		st_sensors_deallocate_trigger(indio_dev);
 
 	st_accel_deallocate_ring(indio_dev);
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index c3c8f2e73c2a..50fa0fc32baa 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -150,22 +150,33 @@ MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
 
 static int st_accel_i2c_probe(struct i2c_client *client)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *adata;
+	struct iio_dev *indio_dev;
 	const char *match;
 	int ret;
 
+	match = device_get_match_data(&client->dev);
+	if (match)
+		strlcpy(client->name, match, sizeof(client->name));
+
+	settings = st_accel_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
+	adata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	match = device_get_match_data(&client->dev);
-	if (match)
-		strlcpy(client->name, match, sizeof(client->name));
-
-	st_sensors_i2c_configure(indio_dev, client, adata);
+	ret = st_sensors_i2c_configure(indio_dev, client);
+	if (ret < 0)
+		return ret;
 
 	ret = st_accel_common_probe(indio_dev);
 	if (ret < 0)
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 474742e35d92..8af7027d5598 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -102,19 +102,31 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match);
 
 static int st_accel_spi_probe(struct spi_device *spi)
 {
-	struct iio_dev *indio_dev;
+	const struct st_sensor_settings *settings;
 	struct st_sensor_data *adata;
+	struct iio_dev *indio_dev;
 	int err;
 
+	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
+				 spi->modalias, sizeof(spi->modalias));
+
+	settings = st_accel_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adata));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	adata = iio_priv(indio_dev);
+	adata->sensor_settings = (struct st_sensor_settings *)settings;
 
-	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
-				 spi->modalias, sizeof(spi->modalias));
-	st_sensors_spi_configure(indio_dev, spi, adata);
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
 
 	err = st_accel_common_probe(indio_dev);
 	if (err < 0)