aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r--drivers/iio/adc/Kconfig43
-rw-r--r--drivers/iio/adc/Makefile4
-rw-r--r--drivers/iio/adc/ad7793.c5
-rw-r--r--drivers/iio/adc/at91_adc.c2
-rw-r--r--drivers/iio/adc/exynos_adc.c224
-rw-r--r--drivers/iio/adc/imx7d_adc.c609
-rw-r--r--drivers/iio/adc/ina2xx-adc.c745
-rw-r--r--drivers/iio/adc/mcp320x.c28
-rw-r--r--drivers/iio/adc/mcp3422.c9
-rw-r--r--drivers/iio/adc/palmas_gpadc.c859
-rw-r--r--drivers/iio/adc/ti-adc128s052.c13
-rw-r--r--drivers/iio/adc/ti-ads8688.c486
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c2
13 files changed, 3013 insertions, 16 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7868c744fd4b..605ff42c4631 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -194,6 +194,25 @@ config HI8435
This driver can also be built as a module. If so, the module will be
called hi8435.
+config INA2XX_ADC
+ tristate "Texas Instruments INA2xx Power Monitors IIO driver"
+ depends on I2C && !SENSORS_INA2XX
+ select REGMAP_I2C
+ select IIO_BUFFER
+ select IIO_KFIFO_BUF
+ help
+ Say yes here to build support for TI INA2xx family of Power Monitors.
+ This driver is mutually exclusive with the HWMON version.
+
+config IMX7D_ADC
+ tristate "IMX7D ADC driver"
+ depends on ARCH_MXC || COMPILE_TEST
+ help
+ Say yes here to build support for IMX7D ADC.
+
+ This driver can also be built as a module. If so, the module will be
+ called imx7d_adc.
+
config LP8788_ADC
tristate "LP8788 ADC driver"
depends on MFD_LP8788
@@ -275,6 +294,14 @@ config NAU7802
To compile this driver as a module, choose M here: the
module will be called nau7802.
+config PALMAS_GPADC
+ tristate "TI Palmas General Purpose ADC"
+ depends on MFD_PALMAS
+ help
+ Palmas series pmic chip by Texas Instruments (twl6035/6037)
+ is used in smartphones and tablets and supports a 16 channel
+ general purpose ADC.
+
config QCOM_SPMI_IADC
tristate "Qualcomm SPMI PMIC current ADC"
depends on SPMI
@@ -324,15 +351,25 @@ config TI_ADC081C
called ti-adc081c.
config TI_ADC128S052
- tristate "Texas Instruments ADC128S052/ADC122S021"
+ tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021"
depends on SPI
help
- If you say yes here you get support for Texas Instruments ADC128S052
- and ADC122S021 chips.
+ If you say yes here you get support for Texas Instruments ADC128S052,
+ ADC122S021 and ADC124S021 chips.
This driver can also be built as a module. If so, the module will be
called ti-adc128s052.
+config TI_ADS8688
+ tristate "Texas Instruments ADS8688"
+ depends on SPI && OF
+ help
+ If you say yes here you get support for Texas Instruments ADS8684 and
+ and ADS8688 ADC chips
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads8688.
+
config TI_AM335X_ADC
tristate "TI's AM335X ADC driver"
depends on MFD_TI_AM335X_TSCADC
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 99b37a963a1e..6435780e9b71 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -20,6 +20,8 @@ obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_HI8435) += hi8435.o
+obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
+obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1027) += max1027.o
obj-$(CONFIG_MAX1363) += max1363.o
@@ -27,11 +29,13 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
obj-$(CONFIG_MCP3422) += mcp3422.o
obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
+obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index 4d960d3b93c0..7b07bb651671 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -478,10 +478,9 @@ static int ad7793_read_raw(struct iio_dev *indio_dev,
*val2 = st->
scale_avail[(st->conf >> 8) & 0x7][1];
return IIO_VAL_INT_PLUS_NANO;
- } else {
- /* 1170mV / 2^23 * 6 */
- scale_uv = (1170ULL * 1000000000ULL * 6ULL);
}
+ /* 1170mV / 2^23 * 6 */
+ scale_uv = (1170ULL * 1000000000ULL * 6ULL);
break;
case IIO_TEMP:
/* 1170mV / 0.81 mV/C / 2^23 */
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 7b40925dd4ff..f284cd6a93d6 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -742,7 +742,7 @@ static int at91_adc_of_get_resolution(struct at91_adc_state *st,
return count;
}
- resolutions = kmalloc(count * sizeof(*resolutions), GFP_KERNEL);
+ resolutions = kmalloc_array(count, sizeof(*resolutions), GFP_KERNEL);
if (!resolutions)
return -ENOMEM;
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 3a2dbb3b4926..c15756d7bf7f 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -35,6 +35,7 @@
#include <linux/regulator/consumer.h>
#include <linux/of_platform.h>
#include <linux/err.h>
+#include <linux/input.h>
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
@@ -42,12 +43,18 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
#define ADC_V1_CON(x) ((x) + 0x00)
+#define ADC_V1_TSC(x) ((x) + 0x04)
#define ADC_V1_DLY(x) ((x) + 0x08)
#define ADC_V1_DATX(x) ((x) + 0x0C)
+#define ADC_V1_DATY(x) ((x) + 0x10)
+#define ADC_V1_UPDN(x) ((x) + 0x14)
#define ADC_V1_INTCLR(x) ((x) + 0x18)
#define ADC_V1_MUX(x) ((x) + 0x1c)
+#define ADC_V1_CLRINTPNDNUP(x) ((x) + 0x20)
/* S3C2410 ADC registers definitions */
#define ADC_S3C2410_MUX(x) ((x) + 0x18)
@@ -71,6 +78,30 @@
#define ADC_S3C2410_DATX_MASK 0x3FF
#define ADC_S3C2416_CON_RES_SEL (1u << 3)
+/* touch screen always uses channel 0 */
+#define ADC_S3C2410_MUX_TS 0
+
+/* ADCTSC Register Bits */
+#define ADC_S3C2443_TSC_UD_SEN (1u << 8)
+#define ADC_S3C2410_TSC_YM_SEN (1u << 7)
+#define ADC_S3C2410_TSC_YP_SEN (1u << 6)
+#define ADC_S3C2410_TSC_XM_SEN (1u << 5)
+#define ADC_S3C2410_TSC_XP_SEN (1u << 4)
+#define ADC_S3C2410_TSC_PULL_UP_DISABLE (1u << 3)
+#define ADC_S3C2410_TSC_AUTO_PST (1u << 2)
+#define ADC_S3C2410_TSC_XY_PST(x) (((x) & 0x3) << 0)
+
+#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_XY_PST(3))
+
+#define ADC_TSC_AUTOPST (ADC_S3C2410_TSC_YM_SEN | \
+ ADC_S3C2410_TSC_YP_SEN | \
+ ADC_S3C2410_TSC_XP_SEN | \
+ ADC_S3C2410_TSC_AUTO_PST | \
+ ADC_S3C2410_TSC_XY_PST(0))
+
/* Bit definitions for ADC_V2 */
#define ADC_V2_CON1_SOFT_RESET (1u << 2)
@@ -88,7 +119,9 @@
/* Bit definitions common for ADC_V1 and ADC_V2 */
#define ADC_CON_EN_START (1u << 0)
#define ADC_CON_EN_START_MASK (0x3 << 0)
+#define ADC_DATX_PRESSED (1u << 15)
#define ADC_DATX_MASK 0xFFF
+#define ADC_DATY_MASK 0xFFF
#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
@@ -98,17 +131,24 @@
struct exynos_adc {
struct exynos_adc_data *data;
struct device *dev;
+ struct input_dev *input;
void __iomem *regs;
struct regmap *pmu_map;
struct clk *clk;
struct clk *sclk;
unsigned int irq;
+ unsigned int tsirq;
+ unsigned int delay;
struct regulator *vdd;
struct completion completion;
u32 value;
unsigned int version;
+
+ bool read_ts;
+ u32 ts_x;
+ u32 ts_y;
};
struct exynos_adc_data {
@@ -197,6 +237,9 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
/* Enable 12-bit ADC resolution */
con1 |= ADC_V1_CON_RES;
writel(con1, ADC_V1_CON(info->regs));
+
+ /* set touchscreen delay */
+ writel(info->delay, ADC_V1_DLY(info->regs));
}
static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
@@ -480,8 +523,8 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
if (info->data->start_conv)
info->data->start_conv(info, chan->address);
- timeout = wait_for_completion_timeout
- (&info->completion, EXYNOS_ADC_TIMEOUT);
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
if (timeout == 0) {
dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
if (info->data->init_hw)
@@ -498,13 +541,55 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
return ret;
}
+static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
+{
+ struct exynos_adc *info = iio_priv(indio_dev);
+ unsigned long timeout;
+ int ret;
+
+ mutex_lock(&indio_dev->mlock);
+ info->read_ts = true;
+
+ reinit_completion(&info->completion);
+
+ writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
+ ADC_V1_TSC(info->regs));
+
+ /* Select the ts channel to be used and Trigger conversion */
+ info->data->start_conv(info, ADC_S3C2410_MUX_TS);
+
+ timeout = wait_for_completion_timeout(&info->completion,
+ EXYNOS_ADC_TIMEOUT);
+ if (timeout == 0) {
+ dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+ if (info->data->init_hw)
+ info->data->init_hw(info);
+ ret = -ETIMEDOUT;
+ } else {
+ *x = info->ts_x;
+ *y = info->ts_y;
+ ret = 0;
+ }
+
+ info->read_ts = false;
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
{
struct exynos_adc *info = (struct exynos_adc *)dev_id;
u32 mask = info->data->mask;
/* Read value */
- info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ if (info->read_ts) {
+ info->ts_x = readl(ADC_V1_DATX(info->regs));
+ info->ts_y = readl(ADC_V1_DATY(info->regs));
+ writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
+ } else {
+ info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+ }
/* clear irq */
if (info->data->clear_irq)
@@ -515,6 +600,46 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/*
+ * Here we (ab)use a threaded interrupt handler to stay running
+ * for as long as the touchscreen remains pressed, we report
+ * a new event with the latest data and then sleep until the
+ * next timer tick. This mirrors the behavior of the old
+ * driver, with much less code.
+ */
+static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
+{
+ struct exynos_adc *info = dev_id;
+ struct iio_dev *dev = dev_get_drvdata(info->dev);
+ u32 x, y;
+ bool pressed;
+ int ret;
+
+ while (info->input->users) {
+ ret = exynos_read_s3c64xx_ts(dev, &x, &y);
+ if (ret == -ETIMEDOUT)
+ break;
+
+ pressed = x & y & ADC_DATX_PRESSED;
+ if (!pressed) {
+ input_report_key(info->input, BTN_TOUCH, 0);
+ input_sync(info->input);
+ break;
+ }
+
+ input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
+ input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
+ input_report_key(info->input, BTN_TOUCH, 1);
+ input_sync(info->input);
+
+ msleep(1);
+ };
+
+ writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
+
+ return IRQ_HANDLED;
+}
+
static int exynos_adc_reg_access(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval)
@@ -566,18 +691,72 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
return 0;
}
+static int exynos_adc_ts_open(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ enable_irq(info->tsirq);
+
+ return 0;
+}
+
+static void exynos_adc_ts_close(struct input_dev *dev)
+{
+ struct exynos_adc *info = input_get_drvdata(dev);
+
+ disable_irq(info->tsirq);
+}
+
+static int exynos_adc_ts_init(struct exynos_adc *info)
+{
+ int ret;
+
+ if (info->tsirq <= 0)
+ return -ENODEV;
+
+ info->input = input_allocate_device();
+ if (!info->input)
+ return -ENOMEM;
+
+ info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
+
+ info->input->name = "S3C24xx TouchScreen";
+ info->input->id.bustype = BUS_HOST;
+ info->input->open = exynos_adc_ts_open;
+ info->input->close = exynos_adc_ts_close;
+
+ input_set_drvdata(info->input, info);
+
+ ret = input_register_device(info->input);
+ if (ret) {
+ input_free_device(info->input);
+ return ret;
+ }
+
+ disable_irq(info->tsirq);
+ ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
+ IRQF_ONESHOT, "touchscreen", info);
+ if (ret)
+ input_unregister_device(info->input);
+
+ return ret;
+}
+
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
struct device_node *np = pdev->dev.of_node;
+ struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = NULL;
struct resource *mem;
+ bool has_ts = false;
int ret = -ENODEV;
int irq;
- if (!np)
- return ret;
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
if (!indio_dev) {
dev_err(&pdev->dev, "failed allocating iio device\n");
@@ -613,8 +792,14 @@ static int exynos_adc_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "no irq resource?\n");
return irq;
}
-
info->irq = irq;
+
+ irq = platform_get_irq(pdev, 1);
+ if (irq == -EPROBE_DEFER)
+ return irq;
+
+ info->tsirq = irq;
+
info->dev = &pdev->dev;
init_completion(&info->completion);
@@ -680,6 +865,22 @@ static int exynos_adc_probe(struct platform_device *pdev)
if (info->data->init_hw)
info->data->init_hw(info);
+ /* leave out any TS related code if unreachable */
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ has_ts = of_property_read_bool(pdev->dev.of_node,
+ "has-touchscreen") || pdata;
+ }
+
+ if (pdata)
+ info->delay = pdata->delay;
+ else
+ info->delay = 10000;
+
+ if (has_ts)
+ ret = exynos_adc_ts_init(info);
+ if (ret)
+ goto err_iio;
+
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
@@ -691,6 +892,11 @@ static int exynos_adc_probe(struct platform_device *pdev)
err_of_populate:
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
+ if (has_ts) {
+ input_unregister_device(info->input);
+ free_irq(info->tsirq, info);
+ }
+err_iio:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
@@ -710,6 +916,10 @@ static int exynos_adc_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
+ if (IS_REACHABLE(CONFIG_INPUT)) {
+ free_irq(info->tsirq, info);
+ input_unregister_device(info->input);
+ }
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
iio_device_unregister(indio_dev);
diff --git a/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c
new file mode 100644
index 000000000000..e2241ee94783
--- /dev/null
+++ b/drivers/iio/adc/imx7d_adc.c
@@ -0,0 +1,609 @@
+/*
+ * Freescale i.MX7D ADC driver
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/sysfs.h>
+
+/* ADC register */
+#define IMX7D_REG_ADC_CH_A_CFG1 0x00
+#define IMX7D_REG_ADC_CH_A_CFG2 0x10
+#define IMX7D_REG_ADC_CH_B_CFG1 0x20
+#define IMX7D_REG_ADC_CH_B_CFG2 0x30
+#define IMX7D_REG_ADC_CH_C_CFG1 0x40
+#define IMX7D_REG_ADC_CH_C_CFG2 0x50
+#define IMX7D_REG_ADC_CH_D_CFG1 0x60
+#define IMX7D_REG_ADC_CH_D_CFG2 0x70
+#define IMX7D_REG_ADC_CH_SW_CFG 0x80
+#define IMX7D_REG_ADC_TIMER_UNIT 0x90
+#define IMX7D_REG_ADC_DMA_FIFO 0xa0
+#define IMX7D_REG_ADC_FIFO_STATUS 0xb0
+#define IMX7D_REG_ADC_INT_SIG_EN 0xc0
+#define IMX7D_REG_ADC_INT_EN 0xd0
+#define IMX7D_REG_ADC_INT_STATUS 0xe0
+#define IMX7D_REG_ADC_CHA_B_CNV_RSLT 0xf0
+#define IMX7D_REG_ADC_CHC_D_CNV_RSLT 0x100
+#define IMX7D_REG_ADC_CH_SW_CNV_RSLT 0x110
+#define IMX7D_REG_ADC_DMA_FIFO_DAT 0x120
+#define IMX7D_REG_ADC_ADC_CFG 0x130
+
+#define IMX7D_REG_ADC_CHANNEL_CFG2_BASE 0x10
+#define IMX7D_EACH_CHANNEL_REG_OFFSET 0x20
+
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN (0x1 << 31)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE BIT(30)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN BIT(29)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(x) ((x) << 24)
+
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4 (0x0 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8 (0x1 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16 (0x2 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32 (0x3 << 12)
+
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4 (0x0 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8 (0x1 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16 (0x2 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32 (0x3 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64 (0x4 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128 (0x5 << 29)
+
+#define IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN BIT(31)
+#define IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN BIT(1)
+#define IMX7D_REG_ADC_ADC_CFG_ADC_EN BIT(0)
+
+#define IMX7D_REG_ADC_INT_CHA_COV_INT_EN BIT(8)
+#define IMX7D_REG_ADC_INT_CHB_COV_INT_EN BIT(9)
+#define IMX7D_REG_ADC_INT_CHC_COV_INT_EN BIT(10)
+#define IMX7D_REG_ADC_INT_CHD_COV_INT_EN BIT(11)
+#define IMX7D_REG_ADC_INT_CHANNEL_INT_EN \
+ (IMX7D_REG_ADC_INT_CHA_COV_INT_EN | \
+ IMX7D_REG_ADC_INT_CHB_COV_INT_EN | \
+ IMX7D_REG_ADC_INT_CHC_COV_INT_EN | \
+ IMX7D_REG_ADC_INT_CHD_COV_INT_EN)
+#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS 0xf00
+#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT 0xf0000
+
+#define IMX7D_ADC_TIMEOUT msecs_to_jiffies(100)
+
+enum imx7d_adc_clk_pre_div {
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_4,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_8,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_16,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_32,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_64,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_128,
+};
+
+enum imx7d_adc_average_num {
+ IMX7D_ADC_AVERAGE_NUM_4,
+ IMX7D_ADC_AVERAGE_NUM_8,
+ IMX7D_ADC_AVERAGE_NUM_16,
+ IMX7D_ADC_AVERAGE_NUM_32,
+};
+
+struct imx7d_adc_feature {
+ enum imx7d_adc_clk_pre_div clk_pre_div;
+ enum imx7d_adc_average_num avg_num;
+
+ u32 core_time_unit; /* impact the sample rate */
+
+ bool average_en;
+};
+
+struct imx7d_adc {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *clk;
+
+ u32 vref_uv;
+ u32 value;
+ u32 channel;
+ u32 pre_div_num;
+
+ struct regulator *vref;
+ struct imx7d_adc_feature adc_feature;
+
+ struct completion completion;
+};
+
+struct imx7d_adc_analogue_core_clk {
+ u32 pre_div;
+ u32 reg_config;
+};
+
+#define IMX7D_ADC_ANALOGUE_CLK_CONFIG(_pre_div, _reg_conf) { \
+ .pre_div = (_pre_div), \
+ .reg_config = (_reg_conf), \
+}
+
+static const struct imx7d_adc_analogue_core_clk imx7d_adc_analogue_clk[] = {
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(4, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(8, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(16, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(32, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(64, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(128, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128),
+};
+
+#define IMX7D_ADC_CHAN(_idx) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+}
+
+static const struct iio_chan_spec imx7d_adc_iio_channels[] = {
+ IMX7D_ADC_CHAN(0),
+ IMX7D_ADC_CHAN(1),
+ IMX7D_ADC_CHAN(2),
+ IMX7D_ADC_CHAN(3),
+ IMX7D_ADC_CHAN(4),
+ IMX7D_ADC_CHAN(5),
+ IMX7D_ADC_CHAN(6),
+ IMX7D_ADC_CHAN(7),
+ IMX7D_ADC_CHAN(8),
+ IMX7D_ADC_CHAN(9),
+ IMX7D_ADC_CHAN(10),
+ IMX7D_ADC_CHAN(11),
+ IMX7D_ADC_CHAN(12),
+ IMX7D_ADC_CHAN(13),
+ IMX7D_ADC_CHAN(14),
+ IMX7D_ADC_CHAN(15),
+};
+
+static const u32 imx7d_adc_average_num[] = {
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4,
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8,
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16,
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32,
+};
+
+static void imx7d_adc_feature_config(struct imx7d_adc *info)
+{
+ info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4;
+ info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32;
+ info->adc_feature.core_time_unit = 1;
+ info->adc_feature.average_en = true;
+}
+
+static void imx7d_adc_sample_rate_set(struct imx7d_adc *info)
+{
+ struct imx7d_adc_feature *adc_feature = &info->adc_feature;
+ struct imx7d_adc_analogue_core_clk adc_analogure_clk;
+ u32 i;
+ u32 tmp_cfg1;
+ u32 sample_rate = 0;
+
+ /*
+ * Before sample set, disable channel A,B,C,D. Here we
+ * clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1.
+ */
+ for (i = 0; i < 4; i++) {
+ tmp_cfg1 =
+ readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
+ tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN;
+ writel(tmp_cfg1,
+ info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
+ }
+
+ adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div];
+ sample_rate |= adc_analogure_clk.reg_config;
+ info->pre_div_num = adc_analogure_clk.pre_div;
+
+ sample_rate |= adc_feature->core_time_unit;
+ writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT);
+}
+
+static void imx7d_adc_hw_init(struct imx7d_adc *info)
+{
+ u32 cfg;
+
+ /* power up and enable adc analogue core */
+ cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
+ cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
+ IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN);
+ cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN;
+ writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
+
+ /* enable channel A,B,C,D interrupt */
+ writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
+ info->regs + IMX7D_REG_ADC_INT_SIG_EN);
+ writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
+ info->regs + IMX7D_REG_ADC_INT_EN);
+
+ imx7d_adc_sample_rate_set(info);
+}
+
+static void imx7d_adc_channel_set(struct imx7d_adc *info)
+{
+ u32 cfg1 = 0;
+ u32 cfg2;
+ u32 channel;
+
+ channel = info->channel;
+
+ /* the channel choose single conversion, and enable average mode */
+ cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN |
+ IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE);
+ if (info->adc_feature.average_en)
+ cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN;
+
+ /*
+ * physical channel 0 chose logical channel A
+ * physical channel 1 chose logical channel B
+ * physical channel 2 chose logical channel C
+ * physical channel 3 chose logical channel D
+ */
+ cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel);
+
+ /*
+ * read register REG_ADC_CH_A\B\C\D_CFG2, according to the
+ * channel chosen
+ */
+ cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
+ IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
+
+ cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num];
+
+ /*
+ * write the register REG_ADC_CH_A\B\C\D_CFG2, according to
+ * the channel chosen
+ */
+ writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
+ IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
+ writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel);
+}
+
+static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info)
+{
+ /* input clock is always 24MHz */
+ u32 input_clk = 24000000;
+ u32 analogue_core_clk;
+ u32 core_time_unit = info->adc_feature.core_time_unit;
+ u32 tmp;
+
+ analogue_core_clk = input_clk / info->pre_div_num;
+ tmp = (core_time_unit + 1) * 6;
+
+ return analogue_core_clk / tmp;
+}
+
+static int imx7d_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ u32 channel;
+ long ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ reinit_completion(&info->completion);
+
+ channel = chan->channel & 0x03;
+ info->channel = channel;
+ imx7d_adc_channel_set(info);
+
+ ret = wait_for_completion_interruptible_timeout
+ (&info->completion, IMX7D_ADC_TIMEOUT);
+ if (ret == 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return -ETIMEDOUT;
+ }
+ if (ret < 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+ }
+
+ *val = info->value;
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ info->vref_uv = regulator_get_voltage(info->vref);
+ *val = info->vref_uv / 1000;
+ *val2 = 12;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = imx7d_adc_get_sample_rate(info);
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int imx7d_adc_read_data(struct imx7d_adc *info)
+{
+ u32 channel;
+ u32 value;
+
+ channel = info->channel & 0x03;
+
+ /*
+ * channel A and B conversion result share one register,
+ * bit[27~16] is the channel B conversion result,
+ * bit[11~0] is the channel A conversion result.
+ * channel C and D is the same.
+ */
+ if (channel < 2)
+ value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT);
+ else
+ value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT);
+ if (channel & 0x1) /* channel B or D */
+ value = (value >> 16) & 0xFFF;
+ else /* channel A or C */
+ value &= 0xFFF;
+
+ return value;
+}
+
+static irqreturn_t imx7d_adc_isr(int irq, void *dev_id)
+{
+ struct imx7d_adc *info = (struct imx7d_adc *)dev_id;
+ int status;
+
+ status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS);
+ if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) {
+ info->value = imx7d_adc_read_data(info);
+ complete(&info->completion);
+
+ /*
+ * The register IMX7D_REG_ADC_INT_STATUS can't clear
+ * itself after read operation, need software to write
+ * 0 to the related bit. Here we clear the channel A/B/C/D
+ * conversion finished flag.
+ */
+ status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS;
+ writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
+ }
+
+ /*
+ * If the channel A/B/C/D conversion timeout, report it and clear these
+ * timeout flags.
+ */
+ if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) {
+ pr_err("%s: ADC got conversion time out interrupt: 0x%08x\n",
+ dev_name(info->dev), status);
+ status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT;
+ writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int imx7d_adc_reg_access(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval)
+{
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ if (!readval || reg % 4 || reg > IMX7D_REG_ADC_ADC_CFG)
+ return -EINVAL;
+
+ *readval = readl(info->regs + reg);
+
+ return 0;
+}
+
+static const struct iio_info imx7d_adc_iio_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &imx7d_adc_read_raw,
+ .debugfs_reg_access = &imx7d_adc_reg_access,
+};
+
+static const struct of_device_id imx7d_adc_match[] = {
+ { .compatible = "fsl,imx7d-adc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx7d_adc_match);
+
+static void imx7d_adc_power_down(struct imx7d_adc *info)
+{
+ u32 adc_cfg;
+
+ adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
+ adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
+ IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN;
+ adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN;
+ writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
+}
+
+static int imx7d_adc_probe(struct platform_device *pdev)
+{
+ struct imx7d_adc *info;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+ int irq;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "Failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ info = iio_priv(indio_dev);
+ info->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(info->regs)) {
+ ret = PTR_ERR(info->regs);
+ dev_err(&pdev->dev,
+ "Failed to remap adc memory, err = %d\n", ret);
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "No irq resource?\n");
+ return irq;
+ }
+
+ info->clk = devm_clk_get(&pdev->dev, "adc");
+ if (IS_ERR(info->clk)) {
+ ret = PTR_ERR(info->clk);
+ dev_err(&pdev->dev, "Failed getting clock, err = %d\n", ret);
+ return ret;
+ }
+
+ info->vref = devm_regulator_get(&pdev->dev, "vref");
+ if (IS_ERR(info->vref)) {
+ ret = PTR_ERR(info->vref);
+ dev_err(&pdev->dev,
+ "Failed getting reference voltage, err = %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_enable(info->vref);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Can't enable adc reference top voltage, err = %d\n",
+ ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ init_completion(&info->completion);
+
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->info = &imx7d_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = imx7d_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels);
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not prepare or enable the clock.\n");
+ goto error_adc_clk_enable;
+ }
+
+ ret = devm_request_irq(info->dev, irq,
+ imx7d_adc_isr, 0,
+ dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed requesting irq, irq = %d\n", irq);
+ goto error_iio_device_register;
+ }
+
+ imx7d_adc_feature_config(info);
+ imx7d_adc_hw_init(info);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ imx7d_adc_power_down(info);
+ dev_err(&pdev->dev, "Couldn't register the device.\n");
+ goto error_iio_device_register;
+ }
+
+ return 0;
+
+error_iio_device_register:
+ clk_disable_unprepare(info->clk);
+error_adc_clk_enable:
+ regulator_disable(info->vref);
+
+ return ret;
+}
+
+static int imx7d_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ imx7d_adc_power_down(info);
+
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vref);
+
+ return 0;
+}
+
+static int __maybe_unused imx7d_adc_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ imx7d_adc_power_down(info);
+
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vref);
+
+ return 0;
+}
+
+static int __maybe_unused imx7d_adc_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct imx7d_adc *info = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(info->vref);
+ if (ret) {
+ dev_err(info->dev,
+ "Can't enable adc reference top voltage, err = %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(info->dev,
+ "Could not prepare or enable clock.\n");
+ regulator_disable(info->vref);
+ return ret;
+ }
+
+ imx7d_adc_hw_init(info);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_resume);
+
+static struct platform_driver imx7d_adc_driver = {
+ .probe = imx7d_adc_probe,
+ .remove = imx7d_adc_remove,
+ .driver = {
+ .name = "imx7d_adc",
+ .of_match_table = imx7d_adc_match,
+ .pm = &imx7d_adc_pm_ops,
+ },
+};
+
+module_platform_driver(imx7d_adc_driver);
+
+MODULE_AUTHOR("Haibo Chen <haibo.chen@freescale.com>");
+MODULE_DESCRIPTION("Freeacale IMX7D ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
new file mode 100644
index 000000000000..d803e5018a42
--- /dev/null
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -0,0 +1,745 @@
+/*
+ * INA2XX Current and Power Monitors
+ *
+ * Copyright 2015 Baylibre SAS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on linux/drivers/iio/adc/ad7291.c
+ * Copyright 2010-2011 Analog Devices Inc.
+ *
+ * Based on linux/drivers/hwmon/ina2xx.c
+ * Copyright 2012 Lothar Felten <l-felten@ti.com>
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * IIO driver for INA219-220-226-230-231
+ *
+ * Configurable 7-bit I2C slave address from 0x40 to 0x4F
+ */
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/ina2xx.h>
+
+#include <linux/util_macros.h>
+
+/* INA2XX registers definition */
+#define INA2XX_CONFIG 0x00
+#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */
+#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */
+#define INA2XX_POWER 0x03 /* readonly */
+#define INA2XX_CURRENT 0x04 /* readonly */
+#define INA2XX_CALIBRATION 0x05
+
+#define INA226_ALERT_MASK 0x06
+#define INA266_CVRF BIT(3)
+
+#define INA2XX_MAX_REGISTERS 8
+
+/* settings - depend on use case */
+#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */
+#define INA226_CONFIG_DEFAULT 0x4327
+#define INA226_DEFAULT_AVG 4
+#define INA226_DEFAULT_IT 1110
+
+#define INA2XX_RSHUNT_DEFAULT 10000
+
+/*
+ * bit mask for reading the averaging setting in the configuration register
+ * FIXME: use regmap_fields.
+ */
+#define INA2XX_MODE_MASK GENMASK(3, 0)
+
+#define INA226_AVG_MASK GENMASK(11, 9)
+#define INA226_SHIFT_AVG(val) ((val) << 9)
+
+/* Integration time for VBus */
+#define INA226_ITB_MASK GENMASK(8, 6)
+#define INA226_SHIFT_ITB(val) ((val) << 6)
+
+/* Integration time for VShunt */
+#define INA226_ITS_MASK GENMASK(5, 3)
+#define INA226_SHIFT_ITS(val) ((val) << 3)
+
+/* Cosmetic macro giving the sampling period for a full P=UxI cycle */
+#define SAMPLING_PERIOD(c) ((c->int_time_vbus + c->int_time_vshunt) \
+ * c->avg)
+
+static bool ina2xx_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ return (reg == INA2XX_CONFIG) || (reg > INA2XX_CURRENT);
+}
+
+static bool ina2xx_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return (reg != INA2XX_CONFIG);
+}
+
+static inline bool is_signed_reg(unsigned int reg)
+{
+ return (reg == INA2XX_SHUNT_VOLTAGE) || (reg == INA2XX_CURRENT);
+}
+
+static const struct regmap_config ina2xx_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = INA2XX_MAX_REGISTERS,
+ .writeable_reg = ina2xx_is_writeable_reg,
+ .volatile_reg = ina2xx_is_volatile_reg,
+};
+
+enum ina2xx_ids { ina219, ina226 };
+
+struct ina2xx_config {
+ u16 config_default;
+ int calibration_factor;
+ int shunt_div;
+ int bus_voltage_shift;
+ int bus_voltage_lsb; /* uV */
+ int power_lsb; /* uW */
+};
+
+struct ina2xx_chip_info {
+ struct regmap *regmap;
+ struct task_struct *task;
+ const struct ina2xx_config *config;
+ struct mutex state_lock;
+ unsigned int shunt_resistor;
+ int avg;
+ s64 prev_ns; /* track buffer capture time, check for underruns*/
+ int int_time_vbus; /* Bus voltage integration time uS */
+ int int_time_vshunt; /* Shunt voltage integration time uS */
+ bool allow_async_readout;
+};
+
+static const struct ina2xx_config ina2xx_config[] = {
+ [ina219] = {
+ .config_default = INA219_CONFIG_DEFAULT,
+ .calibration_factor = 40960000,
+ .shunt_div = 100,
+ .bus_voltage_shift = 3,
+ .bus_voltage_lsb = 4000,
+ .power_lsb = 20000,
+ },
+ [ina226] = {
+ .config_default = INA226_CONFIG_DEFAULT,
+ .calibration_factor = 5120000,
+ .shunt_div = 400,
+ .bus_voltage_shift = 0,
+ .bus_voltage_lsb = 1250,
+ .power_lsb = 25000,
+ },
+};
+
+static int ina2xx_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+ unsigned int regval;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = regmap_read(chip->regmap, chan->address, &regval);
+ if (ret < 0)
+ return ret;
+
+ if (is_signed_reg(chan->address))
+ *val = (s16) regval;
+ else
+ *val = regval;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = chip->avg;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_INT_TIME:
+ *val = 0;
+ if (chan->address == INA2XX_SHUNT_VOLTAGE)
+ *val2 = chip->int_time_vshunt;
+ else
+ *val2 = chip->int_time_vbus;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ /*
+ * Sample freq is read only, it is a consequence of
+ * 1/AVG*(CT_bus+CT_shunt).
+ */
+ *val = DIV_ROUND_CLOSEST(1000000, SAMPLING_PERIOD(chip));
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->address) {
+ case INA2XX_SHUNT_VOLTAGE:
+ /* processed (mV) = raw*1000/shunt_div */
+ *val2 = chip->config->shunt_div;
+ *val = 1000;
+ return IIO_VAL_FRACTIONAL;
+
+ case INA2XX_BUS_VOLTAGE:
+ /* processed (mV) = raw*lsb (uV) / (1000 << shift) */
+ *val = chip->config->bus_voltage_lsb;
+ *val2 = 1000 << chip->config->bus_voltage_shift;
+ return IIO_VAL_FRACTIONAL;
+
+ case INA2XX_POWER:
+ /* processed (mW) = raw*lsb (uW) / 1000 */
+ *val = chip->config->power_lsb;
+ *val2 = 1000;
+ return IIO_VAL_FRACTIONAL;
+
+ case INA2XX_CURRENT:
+ /* processed (mA) = raw (mA) */
+ *val = 1;
+ return IIO_VAL_INT;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * Available averaging rates for ina226. The indices correspond with
+ * the bit values expected by the chip (according to the ina226 datasheet,
+ * table 3 AVG bit settings, found at
+ * http://www.ti.com/lit/ds/symlink/ina226.pdf.
+ */
+static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
+
+static int ina226_set_average(struct ina2xx_chip_info *chip, unsigned int val,
+ unsigned int *config)
+{
+ int bits;
+
+ if (val > 1024 || val < 1)
+ return -EINVAL;
+
+ bits = find_closest(val, ina226_avg_tab,
+ ARRAY_SIZE(ina226_avg_tab));
+
+ chip->avg = ina226_avg_tab[bits];
+
+ *config &= ~INA226_AVG_MASK;
+ *config |= INA226_SHIFT_AVG(bits) & INA226_AVG_MASK;
+
+ return 0;
+}
+
+/* Conversion times in uS */
+static const int ina226_conv_time_tab[] = { 140, 204, 332, 588, 1100,
+ 2116, 4156, 8244 };
+
+static int ina226_set_int_time_vbus(struct ina2xx_chip_info *chip,
+ unsigned int val_us, unsigned int *config)
+{
+ int bits;
+
+ if (val_us > 8244 || val_us < 140)
+ return -EINVAL;
+
+ bits = find_closest(val_us, ina226_conv_time_tab,
+ ARRAY_SIZE(ina226_conv_time_tab));
+
+ chip->int_time_vbus = ina226_conv_time_tab[bits];
+
+ *config &= ~INA226_ITB_MASK;
+ *config |= INA226_SHIFT_ITB(bits) & INA226_ITB_MASK;
+
+ return 0;
+}
+
+static int ina226_set_int_time_vshunt(struct ina2xx_chip_info *chip,
+ unsigned int val_us, unsigned int *config)
+{
+ int bits;
+
+ if (val_us > 8244 || val_us < 140)
+ return -EINVAL;
+
+ bits = find_closest(val_us, ina226_conv_time_tab,
+ ARRAY_SIZE(ina226_conv_time_tab));
+
+ chip->int_time_vshunt = ina226_conv_time_tab[bits];
+
+ *config &= ~INA226_ITS_MASK;
+ *config |= INA226_SHIFT_ITS(bits) & INA226_ITS_MASK;
+
+ return 0;
+}
+
+static int ina2xx_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+ int ret;
+ unsigned int config, tmp;
+
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
+ mutex_lock(&chip->state_lock);
+
+ ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config);
+ if (ret < 0)
+ goto _err;
+
+ tmp = config;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = ina226_set_average(chip, val, &tmp);
+ break;
+
+ case IIO_CHAN_INFO_INT_TIME:
+ if (chan->address == INA2XX_SHUNT_VOLTAGE)
+ ret = ina226_set_int_time_vshunt(chip, val2, &tmp);
+ else
+ ret = ina226_set_int_time_vbus(chip, val2, &tmp);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ if (!ret && (tmp != config))
+ ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp);
+_err:
+ mutex_unlock(&chip->state_lock);
+
+ return ret;
+}
+
+
+static ssize_t ina2xx_allow_async_readout_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+
+ return sprintf(buf, "%d\n", chip->allow_async_readout);
+}
+
+static ssize_t ina2xx_allow_async_readout_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+ bool val;
+ int ret;
+
+ ret = strtobool((const char *) buf, &val);
+ if (ret)
+ return ret;
+
+ chip->allow_async_readout = val;
+
+ return len;
+}
+
+static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
+{
+ if (val <= 0 || val > chip->config->calibration_factor)
+ return -EINVAL;
+
+ chip->shunt_resistor = val;
+ return 0;
+}
+
+static ssize_t ina2xx_shunt_resistor_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+
+ return sprintf(buf, "%d\n", chip->shunt_resistor);
+}
+
+static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul((const char *) buf, 10, &val);
+ if (ret)
+ return ret;
+
+ ret = set_shunt_resistor(chip, val);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+#define INA2XX_CHAN(_type, _index, _address) { \
+ .type = (_type), \
+ .address = (_address), \
+ .indexed = 1, \
+ .channel = (_index), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \
+ | BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .scan_index = (_index), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_CPU, \
+ } \
+}
+
+/*
+ * Sampling Freq is a consequence of the integration times of
+ * the Voltage channels.
+ */
+#define INA2XX_CHAN_VOLTAGE(_index, _address) { \
+ .type = IIO_VOLTAGE, \
+ .address = (_address), \
+ .indexed = 1, \
+ .channel = (_index), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_INT_TIME), \
+ .scan_index = (_index), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ } \
+}
+
+static const struct iio_chan_spec ina2xx_channels[] = {
+ INA2XX_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE),
+ INA2XX_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE),
+ INA2XX_CHAN(IIO_POWER, 2, INA2XX_POWER),
+ INA2XX_CHAN(IIO_CURRENT, 3, INA2XX_CURRENT),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static int ina2xx_work_buffer(struct iio_dev *indio_dev)
+{
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+ unsigned short data[8];
+ int bit, ret, i = 0;
+ unsigned long buffer_us, elapsed_us;
+ s64 time_a, time_b;
+ unsigned int alert;
+
+ time_a = iio_get_time_ns();
+
+ /*
+ * Because the timer thread and the chip conversion clock
+ * are asynchronous, the period difference will eventually
+ * result in reading V[k-1] again, or skip V[k] at time Tk.
+ * In order to resync the timer with the conversion process
+ * we check the ConVersionReadyFlag.
+ * On hardware that supports using the ALERT pin to toggle a
+ * GPIO a triggered buffer could be used instead.
+ * For now, we pay for that extra read of the ALERT register
+ */
+ if (!chip->allow_async_readout)
+ do {
+ ret = regmap_read(chip->regmap, INA226_ALERT_MASK,
+ &alert);
+ if (ret < 0)
+ return ret;
+
+ alert &= INA266_CVRF;
+ trace_printk("Conversion ready: %d\n", !!alert);
+
+ } while (!alert);
+
+ /*
+ * Single register reads: bulk_read will not work with ina226
+ * as there is no auto-increment of the address register for
+ * data length longer than 16bits.
+ */
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ unsigned int val;
+
+ ret = regmap_read(chip->regmap,
+ INA2XX_SHUNT_VOLTAGE + bit, &val);
+ if (ret < 0)
+ return ret;
+
+ data[i++] = val;
+ }
+
+ time_b = iio_get_time_ns();
+
+ iio_push_to_buffers_with_timestamp(indio_dev,
+ (unsigned int *)data, time_a);
+
+ buffer_us = (unsigned long)(time_b - time_a) / 1000;
+ elapsed_us = (unsigned long)(time_a - chip->prev_ns) / 1000;
+
+ trace_printk("uS: elapsed: %lu, buf: %lu\n", elapsed_us, buffer_us);
+
+ chip->prev_ns = time_a;
+
+ return buffer_us;
+};
+
+static int ina2xx_capture_thread(void *data)
+{
+ struct iio_dev *indio_dev = (struct iio_dev *)data;
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+ unsigned int sampling_us = SAMPLING_PERIOD(chip);
+ int buffer_us;
+
+ /*
+ * Poll a bit faster than the chip internal Fs, in case
+ * we wish to sync with the conversion ready flag.
+ */
+ if (!chip->allow_async_readout)
+ sampling_us -= 200;
+
+ do {
+ buffer_us = ina2xx_work_buffer(indio_dev);
+ if (buffer_us < 0)
+ return buffer_us;
+
+ if (sampling_us > buffer_us)
+ udelay(sampling_us - buffer_us);
+
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+
+static int ina2xx_buffer_enable(struct iio_dev *indio_dev)
+{
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+ unsigned int sampling_us = SAMPLING_PERIOD(chip);
+
+ trace_printk("Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n",
+ (unsigned int)(*indio_dev->active_scan_mask),
+ 1000000/sampling_us, chip->avg);
+
+ trace_printk("Expected work period: %u us\n", sampling_us);
+ trace_printk("Async readout mode: %d\n", chip->allow_async_readout);
+
+ chip->prev_ns = iio_get_time_ns();
+
+ chip->task = kthread_run(ina2xx_capture_thread, (void *)indio_dev,
+ "%s:%d-%uus", indio_dev->name, indio_dev->id,
+ sampling_us);
+
+ return PTR_ERR_OR_ZERO(chip->task);
+}
+
+static int ina2xx_buffer_disable(struct iio_dev *indio_dev)
+{
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+
+ if (chip->task) {
+ kthread_stop(chip->task);
+ chip->task = NULL;
+ }
+
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops ina2xx_setup_ops = {
+ .postenable = &ina2xx_buffer_enable,
+ .predisable = &ina2xx_buffer_disable,
+};
+
+static int ina2xx_debug_reg(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval, unsigned *readval)
+{
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+
+ if (!readval)
+ return regmap_write(chip->regmap, reg, writeval);
+
+ return regmap_read(chip->regmap, reg, readval);
+}
+
+/* Possible integration times for vshunt and vbus */
+static IIO_CONST_ATTR_INT_TIME_AVAIL \
+ ("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
+
+static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR,
+ ina2xx_allow_async_readout_show,
+ ina2xx_allow_async_readout_store, 0);
+
+static IIO_DEVICE_ATTR(in_shunt_resistor, S_IRUGO | S_IWUSR,
+ ina2xx_shunt_resistor_show,
+ ina2xx_shunt_resistor_store, 0);
+
+static struct attribute *ina2xx_attributes[] = {
+ &iio_dev_attr_in_allow_async_readout.dev_attr.attr,
+ &iio_const_attr_integration_time_available.dev_attr.attr,
+ &iio_dev_attr_in_shunt_resistor.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ina2xx_attribute_group = {
+ .attrs = ina2xx_attributes,
+};
+
+static const struct iio_info ina2xx_info = {
+ .debugfs_reg_access = &ina2xx_debug_reg,
+ .read_raw = &ina2xx_read_raw,
+ .write_raw = &ina2xx_write_raw,
+ .attrs = &ina2xx_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+/* Initialize the configuration and calibration registers. */
+static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
+{
+ u16 regval;
+ int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
+
+ if (ret < 0)
+ return ret;
+ /*
+ * Set current LSB to 1mA, shunt is in uOhms
+ * (equation 13 in datasheet). We hardcode a Current_LSB
+ * of 1.0 x10-6. The only remaining parameter is RShunt.
+ * There is no need to expose the CALIBRATION register
+ * to the user for now.
+ */
+ regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor,
+ chip->shunt_resistor);
+
+ return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval);
+}
+
+static int ina2xx_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ina2xx_chip_info *chip;
+ struct iio_dev *indio_dev;
+ struct iio_buffer *buffer;
+ int ret;
+ unsigned int val;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ chip = iio_priv(indio_dev);
+
+ chip->config = &ina2xx_config[id->driver_data];
+
+ if (of_property_read_u32(client->dev.of_node,
+ "shunt-resistor", &val) < 0) {
+ struct ina2xx_platform_data *pdata =
+ dev_get_platdata(&client->dev);
+
+ if (pdata)
+ val = pdata->shunt_uohms;
+ else
+ val = INA2XX_RSHUNT_DEFAULT;
+ }
+
+ ret = set_shunt_resistor(chip, val);
+ if (ret)
+ return ret;
+
+ mutex_init(&chip->state_lock);
+
+ /* This is only used for device removal purposes. */
+ i2c_set_clientdata(client, indio_dev);
+
+ indio_dev->name = id->name;
+ indio_dev->channels = ina2xx_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &ina2xx_info;
+ indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+
+ chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ dev_err(&client->dev, "failed to allocate register map\n");
+ return PTR_ERR(chip->regmap);
+ }
+
+ /* Patch the current config register with default. */
+ val = chip->config->config_default;
+
+ if (id->driver_data == ina226) {
+ ina226_set_average(chip, INA226_DEFAULT_AVG, &val);
+ ina226_set_int_time_vbus(chip, INA226_DEFAULT_IT, &val);
+ ina226_set_int_time_vshunt(chip, INA226_DEFAULT_IT, &val);
+ }
+
+ ret = ina2xx_init(chip, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "error configuring the device: %d\n",
+ ret);
+ return -ENODEV;
+ }
+
+ buffer = devm_iio_kfifo_allocate(&indio_dev->dev);
+ if (!buffer)
+ return -ENOMEM;
+
+ indio_dev->setup_ops = &ina2xx_setup_ops;
+
+ iio_device_attach_buffer(indio_dev, buffer);
+
+ return iio_device_register(indio_dev);
+}
+
+
+static int ina2xx_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ /* Powerdown */
+ return regmap_update_bits(chip->regmap, INA2XX_CONFIG,
+ INA2XX_MODE_MASK, 0);
+}
+
+
+static const struct i2c_device_id ina2xx_id[] = {
+ {"ina219", ina219},
+ {"ina220", ina219},
+ {"ina226", ina226},
+ {"ina230", ina226},
+ {"ina231", ina226},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, ina2xx_id);
+
+static struct i2c_driver ina2xx_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = ina2xx_probe,
+ .remove = ina2xx_remove,
+ .id_table = ina2xx_id,
+};
+
+module_i2c_driver(ina2xx_driver);
+
+MODULE_AUTHOR("Marc Titinger <marc.titinger@baylibre.com>");
+MODULE_DESCRIPTION("Texas Instruments INA2XX ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index 8569c8e1f4b2..d1c05f6eed18 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -354,6 +354,7 @@ static int mcp320x_remove(struct spi_device *spi)
#if defined(CONFIG_OF)
static const struct of_device_id mcp320x_dt_ids[] = {
+ /* NOTE: The use of compatibles with no vendor prefix is deprecated. */
{
.compatible = "mcp3001",
.data = &mcp320x_chip_infos[mcp3001],
@@ -382,6 +383,33 @@ static const struct of_device_id mcp320x_dt_ids[] = {
.compatible = "mcp3301",
.data = &mcp320x_chip_infos[mcp3301],
}, {
+ .compatible = "microchip,mcp3001",
+ .data = &mcp320x_chip_infos[mcp3001],
+ }, {
+ .compatible = "microchip,mcp3002",
+ .data = &mcp320x_chip_infos[mcp3002],
+ }, {
+ .compatible = "microchip,mcp3004",
+ .data = &mcp320x_chip_infos[mcp3004],
+ }, {
+ .compatible = "microchip,mcp3008",
+ .data = &mcp320x_chip_infos[mcp3008],
+ }, {
+ .compatible = "microchip,mcp3201",
+ .data = &mcp320x_chip_infos[mcp3201],
+ }, {
+ .compatible = "microchip,mcp3202",
+ .data = &mcp320x_chip_infos[mcp3202],
+ }, {
+ .compatible = "microchip,mcp3204",
+ .data = &mcp320x_chip_infos[mcp3204],
+ }, {
+ .compatible = "microchip,mcp3208",
+ .data = &mcp320x_chip_infos[mcp3208],
+ }, {
+ .compatible = "microchip,mcp3301",
+ .data = &mcp320x_chip_infos[mcp3301],
+ }, {
}
};
MODULE_DEVICE_TABLE(of, mcp320x_dt_ids);
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 3555122008b4..6eca7aea8a37 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -305,6 +305,10 @@ static const struct attribute_group mcp3422_attribute_group = {
.attrs = mcp3422_attributes,
};
+static const struct iio_chan_spec mcp3421_channels[] = {
+ MCP3422_CHAN(0),
+};
+
static const struct iio_chan_spec mcp3422_channels[] = {
MCP3422_CHAN(0),
MCP3422_CHAN(1),
@@ -352,6 +356,10 @@ static int mcp3422_probe(struct i2c_client *client,
indio_dev->info = &mcp3422_info;
switch (adc->id) {
+ case 1:
+ indio_dev->channels = mcp3421_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels);
+ break;
case 2:
case 3:
case 6:
@@ -383,6 +391,7 @@ static int mcp3422_probe(struct i2c_client *client,
}
static const struct i2c_device_id mcp3422_id[] = {
+ { "mcp3421", 1 },
{ "mcp3422", 2 },
{ "mcp3423", 3 },
{ "mcp3424", 4 },
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
new file mode 100644
index 000000000000..f42eb8a7d21f
--- /dev/null
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -0,0 +1,859 @@
+/*
+ * palmas-adc.c -- TI PALMAS GPADC.
+ *
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Pradeep Goudagunta <pgoudagunta@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pm.h>
+#include <linux/mfd/palmas.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+#define MOD_NAME "palmas-gpadc"
+#define PALMAS_ADC_CONVERSION_TIMEOUT (msecs_to_jiffies(5000))
+#define PALMAS_TO_BE_CALCULATED 0
+#define PALMAS_GPADC_TRIMINVALID -1
+
+struct palmas_gpadc_info {
+/* calibration codes and regs */
+ int x1; /* lower ideal code */
+ int x2; /* higher ideal code */
+ int v1; /* expected lower volt reading */
+ int v2; /* expected higher volt reading */
+ u8 trim1_reg; /* register number for lower trim */
+ u8 trim2_reg; /* register number for upper trim */
+ int gain; /* calculated from above (after reading trim regs) */
+ int offset; /* calculated from above (after reading trim regs) */
+ int gain_error; /* calculated from above (after reading trim regs) */
+ bool is_uncalibrated; /* if channel has calibration data */
+};
+
+#define PALMAS_ADC_INFO(_chan, _x1, _x2, _v1, _v2, _t1, _t2, _is_uncalibrated) \
+ [PALMAS_ADC_CH_##_chan] = { \
+ .x1 = _x1, \
+ .x2 = _x2, \
+ .v1 = _v1, \
+ .v2 = _v2, \
+ .gain = PALMAS_TO_BE_CALCULATED, \
+ .offset = PALMAS_TO_BE_CALCULATED, \
+ .gain_error = PALMAS_TO_BE_CALCULATED, \
+ .trim1_reg = PALMAS_GPADC_TRIM##_t1, \
+ .trim2_reg = PALMAS_GPADC_TRIM##_t2, \
+ .is_uncalibrated = _is_uncalibrated \
+ }
+
+static struct palmas_gpadc_info palmas_gpadc_info[] = {
+ PALMAS_ADC_INFO(IN0, 2064, 3112, 630, 950, 1, 2, false),
+ PALMAS_ADC_INFO(IN1, 2064, 3112, 630, 950, 1, 2, false),
+ PALMAS_ADC_INFO(IN2, 2064, 3112, 1260, 1900, 3, 4, false),
+ PALMAS_ADC_INFO(IN3, 2064, 3112, 630, 950, 1, 2, false),
+ PALMAS_ADC_INFO(IN4, 2064, 3112, 630, 950, 1, 2, false),
+ PALMAS_ADC_INFO(IN5, 2064, 3112, 630, 950, 1, 2, false),
+ PALMAS_ADC_INFO(IN6, 2064, 3112, 2520, 3800, 5, 6, false),
+ PALMAS_ADC_INFO(IN7, 2064, 3112, 2520, 3800, 7, 8, false),
+ PALMAS_ADC_INFO(IN8, 2064, 3112, 3150, 4750, 9, 10, false),
+ PALMAS_ADC_INFO(IN9, 2064, 3112, 5670, 8550, 11, 12, false),
+ PALMAS_ADC_INFO(IN10, 2064, 3112, 3465, 5225, 13, 14, false),
+ PALMAS_ADC_INFO(IN11, 0, 0, 0, 0, INVALID, INVALID, true),
+ PALMAS_ADC_INFO(IN12, 0, 0, 0, 0, INVALID, INVALID, true),
+ PALMAS_ADC_INFO(IN13, 0, 0, 0, 0, INVALID, INVALID, true),
+ PALMAS_ADC_INFO(IN14, 2064, 3112, 3645, 5225, 15, 16, false),
+ PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true),
+};
+
+/**
+ * struct palmas_gpadc - the palmas_gpadc structure
+ * @ch0_current: channel 0 current source setting
+ * 0: 0 uA
+ * 1: 5 uA
+ * 2: 15 uA
+ * 3: 20 uA
+ * @ch3_current: channel 0 current source setting
+ * 0: 0 uA
+ * 1: 10 uA
+ * 2: 400 uA
+ * 3: 800 uA
+ * @extended_delay: enable the gpadc extended delay mode
+ * @auto_conversion_period: define the auto_conversion_period
+ *
+ * This is the palmas_gpadc structure to store run-time information
+ * and pointers for this driver instance.
+ */
+
+struct palmas_gpadc {
+ struct device *dev;
+ struct palmas *palmas;
+ u8 ch0_current;
+ u8 ch3_current;
+ bool extended_delay;
+ int irq;
+ int irq_auto_0;
+ int irq_auto_1;
+ struct palmas_gpadc_info *adc_info;
+ struct completion conv_completion;
+ struct palmas_adc_wakeup_property wakeup1_data;
+ struct palmas_adc_wakeup_property wakeup2_data;
+ bool wakeup1_enable;
+ bool wakeup2_enable;
+ int auto_conversion_period;
+};
+
+/*
+ * GPADC lock issue in AUTO mode.
+ * Impact: In AUTO mode, GPADC conversion can be locked after disabling AUTO
+ * mode feature.
+ * Details:
+ * When the AUTO mode is the only conversion mode enabled, if the AUTO
+ * mode feature is disabled with bit GPADC_AUTO_CTRL. AUTO_CONV1_EN = 0
+ * or bit GPADC_AUTO_CTRL. AUTO_CONV0_EN = 0 during a conversion, the
+ * conversion mechanism can be seen as locked meaning that all following
+ * conversion will give 0 as a result. Bit GPADC_STATUS.GPADC_AVAILABLE
+ * will stay at 0 meaning that GPADC is busy. An RT conversion can unlock
+ * the GPADC.
+ *
+ * Workaround(s):
+ * To avoid the lock mechanism, the workaround to follow before any stop
+ * conversion request is:
+ * Force the GPADC state machine to be ON by using the GPADC_CTRL1.
+ * GPADC_FORCE bit = 1
+ * Shutdown the GPADC AUTO conversion using
+ * GPADC_AUTO_CTRL.SHUTDOWN_CONV[01] = 0.
+ * After 100us, force the GPADC state machine to be OFF by using the
+ * GPADC_CTRL1. GPADC_FORCE bit = 0
+ */
+
+static int palmas_disable_auto_conversion(struct palmas_gpadc *adc)
+{
+ int ret;
+
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_CTRL1,
+ PALMAS_GPADC_CTRL1_GPADC_FORCE,
+ PALMAS_GPADC_CTRL1_GPADC_FORCE);
+ if (ret < 0) {
+ dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_AUTO_CTRL,
+ PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 |
+ PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0,
+ 0);
+ if (ret < 0) {
+ dev_err(adc->dev, "AUTO_CTRL update failed: %d\n", ret);
+ return ret;
+ }
+
+ udelay(100);
+
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_CTRL1,
+ PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
+ if (ret < 0)
+ dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
+
+ return ret;
+}
+
+static irqreturn_t palmas_gpadc_irq(int irq, void *data)
+{
+ struct palmas_gpadc *adc = data;
+
+ complete(&adc->conv_completion);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t palmas_gpadc_irq_auto(int irq, void *data)
+{
+ struct palmas_gpadc *adc = data;
+
+ dev_dbg(adc->dev, "Threshold interrupt %d occurs\n", irq);
+ palmas_disable_auto_conversion(adc);
+
+ return IRQ_HANDLED;
+}
+
+static int palmas_gpadc_start_mask_interrupt(struct palmas_gpadc *adc,
+ bool mask)
+{
+ int ret;
+
+ if (!mask)
+ ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
+ PALMAS_INT3_MASK,
+ PALMAS_INT3_MASK_GPADC_EOC_SW, 0);
+ else
+ ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
+ PALMAS_INT3_MASK,
+ PALMAS_INT3_MASK_GPADC_EOC_SW,
+ PALMAS_INT3_MASK_GPADC_EOC_SW);
+ if (ret < 0)
+ dev_err(adc->dev, "GPADC INT MASK update failed: %d\n", ret);
+
+ return ret;
+}
+
+static int palmas_gpadc_enable(struct palmas_gpadc *adc, int adc_chan,
+ int enable)
+{
+ unsigned int mask, val;
+ int ret;
+
+ if (enable) {
+ val = (adc->extended_delay
+ << PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT);
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_RT_CTRL,
+ PALMAS_GPADC_RT_CTRL_EXTEND_DELAY, val);
+ if (ret < 0) {
+ dev_err(adc->dev, "RT_CTRL update failed: %d\n", ret);
+ return ret;
+ }
+
+ mask = (PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK |
+ PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK |
+ PALMAS_GPADC_CTRL1_GPADC_FORCE);
+ val = (adc->ch0_current
+ << PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT);
+ val |= (adc->ch3_current
+ << PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT);
+ val |= PALMAS_GPADC_CTRL1_GPADC_FORCE;
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_CTRL1, mask, val);
+ if (ret < 0) {
+ dev_err(adc->dev,
+ "Failed to update current setting: %d\n", ret);
+ return ret;
+ }
+
+ mask = (PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK |
+ PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
+ val = (adc_chan | PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_SW_SELECT, mask, val);
+ if (ret < 0) {
+ dev_err(adc->dev, "SW_SELECT update failed: %d\n", ret);
+ return ret;
+ }
+ } else {
+ ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_SW_SELECT, 0);
+ if (ret < 0)
+ dev_err(adc->dev, "SW_SELECT write failed: %d\n", ret);
+
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_CTRL1,
+ PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
+ if (ret < 0) {
+ dev_err(adc->dev, "CTRL1 update failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static int palmas_gpadc_read_prepare(struct palmas_gpadc *adc, int adc_chan)
+{
+ int ret;
+
+ ret = palmas_gpadc_enable(adc, adc_chan, true);
+ if (ret < 0)
+ return ret;
+
+ return palmas_gpadc_start_mask_interrupt(adc, 0);
+}
+
+static void palmas_gpadc_read_done(struct palmas_gpadc *adc, int adc_chan)
+{
+ palmas_gpadc_start_mask_interrupt(adc, 1);
+ palmas_gpadc_enable(adc, adc_chan, false);
+}
+
+static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
+{
+ int k;
+ int d1;
+ int d2;
+ int ret;
+ int gain;
+ int x1 = adc->adc_info[adc_chan].x1;
+ int x2 = adc->adc_info[adc_chan].x2;
+ int v1 = adc->adc_info[adc_chan].v1;
+ int v2 = adc->adc_info[adc_chan].v2;
+
+ ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
+ adc->adc_info[adc_chan].trim1_reg, &d1);
+ if (ret < 0) {
+ dev_err(adc->dev, "TRIM read failed: %d\n", ret);
+ goto scrub;
+ }
+
+ ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
+ adc->adc_info[adc_chan].trim2_reg, &d2);
+ if (ret < 0) {
+ dev_err(adc->dev, "TRIM read failed: %d\n", ret);
+ goto scrub;
+ }
+
+ /* gain error calculation */
+ k = (1000 + (1000 * (d2 - d1)) / (x2 - x1));
+
+ /* gain calculation */
+ gain = ((v2 - v1) * 1000) / (x2 - x1);
+
+ adc->adc_info[adc_chan].gain_error = k;
+ adc->adc_info[adc_chan].gain = gain;
+ /* offset Calculation */
+ adc->adc_info[adc_chan].offset = (d1 * 1000) - ((k - 1000) * x1);
+
+scrub:
+ return ret;
+}
+
+static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan)
+{
+ unsigned int val;
+ int ret;
+
+ init_completion(&adc->conv_completion);
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_SW_SELECT,
+ PALMAS_GPADC_SW_SELECT_SW_START_CONV0,
+ PALMAS_GPADC_SW_SELECT_SW_START_CONV0);
+ if (ret < 0) {
+ dev_err(adc->dev, "SELECT_SW_START write failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = wait_for_completion_timeout(&adc->conv_completion,
+ PALMAS_ADC_CONVERSION_TIMEOUT);
+ if (ret == 0) {
+ dev_err(adc->dev, "conversion not completed\n");
+ return -ETIMEDOUT;
+ }
+
+ ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_SW_CONV0_LSB, &val, 2);
+ if (ret < 0) {
+ dev_err(adc->dev, "SW_CONV0_LSB read failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = val & 0xFFF;
+
+ return ret;
+}
+
+static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc,
+ int adc_chan, int val)
+{
+ if (!adc->adc_info[adc_chan].is_uncalibrated)
+ val = (val*1000 - adc->adc_info[adc_chan].offset) /
+ adc->adc_info[adc_chan].gain_error;
+
+ if (val < 0) {
+ dev_err(adc->dev, "Mismatch with calibration\n");
+ return 0;
+ }
+
+ val = (val * adc->adc_info[adc_chan].gain) / 1000;
+
+ return val;
+}
+
+static int palmas_gpadc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ int adc_chan = chan->channel;
+ int ret = 0;
+
+ if (adc_chan > PALMAS_ADC_CH_MAX)
+ return -EINVAL;
+
+ mutex_lock(&indio_dev->mlock);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = palmas_gpadc_read_prepare(adc, adc_chan);
+ if (ret < 0)
+ goto out;
+
+ ret = palmas_gpadc_start_conversion(adc, adc_chan);
+ if (ret < 0) {
+ dev_err(adc->dev,
+ "ADC start conversion failed\n");
+ goto out;
+ }
+
+ if (mask == IIO_CHAN_INFO_PROCESSED)
+ ret = palmas_gpadc_get_calibrated_code(
+ adc, adc_chan, ret);
+
+ *val = ret;
+
+ ret = IIO_VAL_INT;
+ goto out;
+ }
+
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+
+out:
+ palmas_gpadc_read_done(adc, adc_chan);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static const struct iio_info palmas_gpadc_iio_info = {
+ .read_raw = palmas_gpadc_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+#define PALMAS_ADC_CHAN_IIO(chan, _type, chan_info) \
+{ \
+ .datasheet_name = PALMAS_DATASHEET_NAME(chan), \
+ .type = _type, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(chan_info), \
+ .indexed = 1, \
+ .channel = PALMAS_ADC_CH_##chan, \
+}
+
+static const struct iio_chan_spec palmas_gpadc_iio_channel[] = {
+ PALMAS_ADC_CHAN_IIO(IN0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN1, IIO_TEMP, IIO_CHAN_INFO_RAW),
+ PALMAS_ADC_CHAN_IIO(IN2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN3, IIO_TEMP, IIO_CHAN_INFO_RAW),
+ PALMAS_ADC_CHAN_IIO(IN4, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN12, IIO_TEMP, IIO_CHAN_INFO_RAW),
+ PALMAS_ADC_CHAN_IIO(IN13, IIO_TEMP, IIO_CHAN_INFO_RAW),
+ PALMAS_ADC_CHAN_IIO(IN14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+ PALMAS_ADC_CHAN_IIO(IN15, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+};
+
+static int palmas_gpadc_get_adc_dt_data(struct platform_device *pdev,
+ struct palmas_gpadc_platform_data **gpadc_pdata)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct palmas_gpadc_platform_data *gp_data;
+ int ret;
+ u32 pval;
+
+ gp_data = devm_kzalloc(&pdev->dev, sizeof(*gp_data), GFP_KERNEL);
+ if (!gp_data)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(np, "ti,channel0-current-microamp", &pval);
+ if (!ret)
+ gp_data->ch0_current = pval;
+
+ ret = of_property_read_u32(np, "ti,channel3-current-microamp", &pval);
+ if (!ret)
+ gp_data->ch3_current = pval;
+
+ gp_data->extended_delay = of_property_read_bool(np,
+ "ti,enable-extended-delay");
+
+ *gpadc_pdata = gp_data;
+
+ return 0;
+}
+
+static int palmas_gpadc_probe(struct platform_device *pdev)
+{
+ struct palmas_gpadc *adc;
+ struct palmas_platform_data *pdata;
+ struct palmas_gpadc_platform_data *gpadc_pdata = NULL;
+ struct iio_dev *indio_dev;
+ int ret, i;
+
+ pdata = dev_get_platdata(pdev->dev.parent);
+
+ if (pdata && pdata->gpadc_pdata)
+ gpadc_pdata = pdata->gpadc_pdata;
+
+ if (!gpadc_pdata && pdev->dev.of_node) {
+ ret = palmas_gpadc_get_adc_dt_data(pdev, &gpadc_pdata);
+ if (ret < 0)
+ return ret;
+ }
+ if (!gpadc_pdata)
+ return -EINVAL;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "iio_device_alloc failed\n");
+ return -ENOMEM;
+ }
+
+ adc = iio_priv(indio_dev);
+ adc->dev = &pdev->dev;
+ adc->palmas = dev_get_drvdata(pdev->dev.parent);
+ adc->adc_info = palmas_gpadc_info;
+ init_completion(&adc->conv_completion);
+ dev_set_drvdata(&pdev->dev, indio_dev);
+
+ adc->auto_conversion_period = gpadc_pdata->auto_conversion_period_ms;
+ adc->irq = palmas_irq_get_virq(adc->palmas, PALMAS_GPADC_EOC_SW_IRQ);
+ if (adc->irq < 0) {
+ dev_err(adc->dev,
+ "get virq failed: %d\n", adc->irq);
+ ret = adc->irq;
+ goto out;
+ }
+ ret = request_threaded_irq(adc->irq, NULL,
+ palmas_gpadc_irq,
+ IRQF_ONESHOT | IRQF_EARLY_RESUME, dev_name(adc->dev),
+ adc);
+ if (ret < 0) {
+ dev_err(adc->dev,
+ "request irq %d failed: %d\n", adc->irq, ret);
+ goto out;
+ }
+
+ if (gpadc_pdata->adc_wakeup1_data) {
+ memcpy(&adc->wakeup1_data, gpadc_pdata->adc_wakeup1_data,
+ sizeof(adc->wakeup1_data));
+ adc->wakeup1_enable = true;
+ adc->irq_auto_0 = platform_get_irq(pdev, 1);
+ ret = request_threaded_irq(adc->irq_auto_0, NULL,
+ palmas_gpadc_irq_auto,
+ IRQF_ONESHOT | IRQF_EARLY_RESUME,
+ "palmas-adc-auto-0", adc);
+ if (ret < 0) {
+ dev_err(adc->dev, "request auto0 irq %d failed: %d\n",
+ adc->irq_auto_0, ret);
+ goto out_irq_free;
+ }
+ }
+
+ if (gpadc_pdata->adc_wakeup2_data) {
+ memcpy(&adc->wakeup2_data, gpadc_pdata->adc_wakeup2_data,
+ sizeof(adc->wakeup2_data));
+ adc->wakeup2_enable = true;
+ adc->irq_auto_1 = platform_get_irq(pdev, 2);
+ ret = request_threaded_irq(adc->irq_auto_1, NULL,
+ palmas_gpadc_irq_auto,
+ IRQF_ONESHOT | IRQF_EARLY_RESUME,
+ "palmas-adc-auto-1", adc);
+ if (ret < 0) {
+ dev_err(adc->dev, "request auto1 irq %d failed: %d\n",
+ adc->irq_auto_1, ret);
+ goto out_irq_auto0_free;
+ }
+ }
+
+ /* set the current source 0 (value 0/5/15/20 uA => 0..3) */
+ if (gpadc_pdata->ch0_current <= 1)
+ adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_0;
+ else if (gpadc_pdata->ch0_current <= 5)
+ adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_5;
+ else if (gpadc_pdata->ch0_current <= 15)
+ adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_15;
+ else
+ adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_20;
+
+ /* set the current source 3 (value 0/10/400/800 uA => 0..3) */
+ if (gpadc_pdata->ch3_current <= 1)
+ adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_0;
+ else if (gpadc_pdata->ch3_current <= 10)
+ adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_10;
+ else if (gpadc_pdata->ch3_current <= 400)
+ adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_400;
+ else
+ adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_800;
+
+ adc->extended_delay = gpadc_pdata->extended_delay;
+
+ indio_dev->name = MOD_NAME;
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->info = &palmas_gpadc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = palmas_gpadc_iio_channel;
+ indio_dev->num_channels = ARRAY_SIZE(palmas_gpadc_iio_channel);
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(adc->dev, "iio_device_register() failed: %d\n", ret);
+ goto out_irq_auto1_free;
+ }
+
+ device_set_wakeup_capable(&pdev->dev, 1);
+ for (i = 0; i < PALMAS_ADC_CH_MAX; i++) {
+ if (!(adc->adc_info[i].is_uncalibrated))
+ palmas_gpadc_calibrate(adc, i);
+ }
+
+ if (adc->wakeup1_enable || adc->wakeup2_enable)
+ device_wakeup_enable(&pdev->dev);
+
+ return 0;
+
+out_irq_auto1_free:
+ if (gpadc_pdata->adc_wakeup2_data)
+ free_irq(adc->irq_auto_1, adc);
+out_irq_auto0_free:
+ if (gpadc_pdata->adc_wakeup1_data)
+ free_irq(adc->irq_auto_0, adc);
+out_irq_free:
+ free_irq(adc->irq, adc);
+out:
+ return ret;
+}
+
+static int palmas_gpadc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(&pdev->dev);
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+
+ if (adc->wakeup1_enable || adc->wakeup2_enable)
+ device_wakeup_disable(&pdev->dev);
+ iio_device_unregister(indio_dev);
+ free_irq(adc->irq, adc);
+ if (adc->wakeup1_enable)
+ free_irq(adc->irq_auto_0, adc);
+ if (adc->wakeup2_enable)
+ free_irq(adc->irq_auto_1, adc);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
+{
+ int adc_period, conv;
+ int i;
+ int ch0 = 0, ch1 = 0;
+ int thres;
+ int ret;
+
+ adc_period = adc->auto_conversion_period;
+ for (i = 0; i < 16; ++i) {
+ if (((1000 * (1 << i)) / 32) < adc_period)
+ continue;
+ }
+ if (i > 0)
+ i--;
+ adc_period = i;
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_AUTO_CTRL,
+ PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK,
+ adc_period);
+ if (ret < 0) {
+ dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
+ return ret;
+ }
+
+ conv = 0;
+ if (adc->wakeup1_enable) {
+ int polarity;
+
+ ch0 = adc->wakeup1_data.adc_channel_number;
+ conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN;
+ if (adc->wakeup1_data.adc_high_threshold > 0) {
+ thres = adc->wakeup1_data.adc_high_threshold;
+ polarity = 0;
+ } else {
+ thres = adc->wakeup1_data.adc_low_threshold;
+ polarity = PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL;
+ }
+
+ ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_THRES_CONV0_LSB, thres & 0xFF);
+ if (ret < 0) {
+ dev_err(adc->dev,
+ "THRES_CONV0_LSB write failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_THRES_CONV0_MSB,
+ ((thres >> 8) & 0xF) | polarity);
+ if (ret < 0) {
+ dev_err(adc->dev,
+ "THRES_CONV0_MSB write failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ if (adc->wakeup2_enable) {
+ int polarity;
+
+ ch1 = adc->wakeup2_data.adc_channel_number;
+ conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN;
+ if (adc->wakeup2_data.adc_high_threshold > 0) {
+ thres = adc->wakeup2_data.adc_high_threshold;
+ polarity = 0;
+ } else {
+ thres = adc->wakeup2_data.adc_low_threshold;
+ polarity = PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL;
+ }
+
+ ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_THRES_CONV1_LSB, thres & 0xFF);
+ if (ret < 0) {
+ dev_err(adc->dev,
+ "THRES_CONV1_LSB write failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_THRES_CONV1_MSB,
+ ((thres >> 8) & 0xF) | polarity);
+ if (ret < 0) {
+ dev_err(adc->dev,
+ "THRES_CONV1_MSB write failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_AUTO_SELECT, (ch1 << 4) | ch0);
+ if (ret < 0) {
+ dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_AUTO_CTRL,
+ PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN |
+ PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN, conv);
+ if (ret < 0)
+ dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
+
+ return ret;
+}
+
+static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc)
+{
+ int ret;
+
+ ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_AUTO_SELECT, 0);
+ if (ret < 0) {
+ dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = palmas_disable_auto_conversion(adc);
+ if (ret < 0)
+ dev_err(adc->dev, "Disable auto conversion failed: %d\n", ret);
+
+ return ret;
+}
+
+static int palmas_gpadc_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
+ int ret;
+
+ if (!device_may_wakeup(dev) || !wakeup)
+ return 0;
+
+ ret = palmas_adc_wakeup_configure(adc);
+ if (ret < 0)
+ return ret;
+
+ if (adc->wakeup1_enable)
+ enable_irq_wake(adc->irq_auto_0);
+
+ if (adc->wakeup2_enable)
+ enable_irq_wake(adc->irq_auto_1);
+
+ return 0;
+}
+
+static int palmas_gpadc_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
+ int ret;
+
+ if (!device_may_wakeup(dev) || !wakeup)
+ return 0;
+
+ ret = palmas_adc_wakeup_reset(adc);
+ if (ret < 0)
+ return ret;
+
+ if (adc->wakeup1_enable)
+ disable_irq_wake(adc->irq_auto_0);
+
+ if (adc->wakeup2_enable)
+ disable_irq_wake(adc->irq_auto_1);
+
+ return 0;
+};
+#endif
+
+static const struct dev_pm_ops palmas_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(palmas_gpadc_suspend,
+ palmas_gpadc_resume)
+};
+
+static const struct of_device_id of_palmas_gpadc_match_tbl[] = {
+ { .compatible = "ti,palmas-gpadc", },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_palmas_gpadc_match_tbl);
+
+static struct platform_driver palmas_gpadc_driver = {
+ .probe = palmas_gpadc_probe,
+ .remove = palmas_gpadc_remove,
+ .driver = {
+ .name = MOD_NAME,
+ .pm = &palmas_pm_ops,
+ .of_match_table = of_palmas_gpadc_match_tbl,
+ },
+};
+
+static int __init palmas_gpadc_init(void)
+{
+ return platform_driver_register(&palmas_gpadc_driver);
+}
+module_init(palmas_gpadc_init);
+
+static void __exit palmas_gpadc_exit(void)
+{
+ platform_driver_unregister(&palmas_gpadc_driver);
+}
+module_exit(palmas_gpadc_exit);
+
+MODULE_DESCRIPTION("palmas GPADC driver");
+MODULE_AUTHOR("Pradeep Goudagunta<pgoudagunta@nvidia.com>");
+MODULE_ALIAS("platform:palmas-gpadc");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
index ff6f7f63c8d9..bc58867d6e8d 100644
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -1,10 +1,11 @@
/*
* Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@gmail.com>
*
- * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip.
+ * Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip.
* Datasheets can be found here:
* http://www.ti.com/lit/ds/symlink/adc128s052.pdf
* http://www.ti.com/lit/ds/symlink/adc122s021.pdf
+ * http://www.ti.com/lit/ds/symlink/adc124s021.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -114,9 +115,17 @@ static const struct iio_chan_spec adc122s021_channels[] = {
ADC128_VOLTAGE_CHANNEL(1),
};
+static const struct iio_chan_spec adc124s021_channels[] = {
+ ADC128_VOLTAGE_CHANNEL(0),
+ ADC128_VOLTAGE_CHANNEL(1),
+ ADC128_VOLTAGE_CHANNEL(2),
+ ADC128_VOLTAGE_CHANNEL(3),
+};
+
static const struct adc128_configuration adc128_config[] = {
{ adc128s052_channels, ARRAY_SIZE(adc128s052_channels) },
{ adc122s021_channels, ARRAY_SIZE(adc122s021_channels) },
+ { adc124s021_channels, ARRAY_SIZE(adc124s021_channels) },
};
static const struct iio_info adc128_info = {
@@ -177,6 +186,7 @@ static int adc128_remove(struct spi_device *spi)
static const struct of_device_id adc128_of_match[] = {
{ .compatible = "ti,adc128s052", },
{ .compatible = "ti,adc122s021", },
+ { .compatible = "ti,adc124s021", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, adc128_of_match);
@@ -184,6 +194,7 @@ MODULE_DEVICE_TABLE(of, adc128_of_match);
static const struct spi_device_id adc128_id[] = {
{ "adc128s052", 0}, /* index into adc128_config */
{ "adc122s021", 1},
+ { "adc124s021", 2},
{ }
};
MODULE_DEVICE_TABLE(spi, adc128_id);
diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
new file mode 100644
index 000000000000..03e907028cb6
--- /dev/null
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -0,0 +1,486 @@
+/*
+ * Copyright (C) 2015 Prevas A/S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define ADS8688_CMD_REG(x) (x << 8)
+#define ADS8688_CMD_REG_NOOP 0x00
+#define ADS8688_CMD_REG_RST 0x85
+#define ADS8688_CMD_REG_MAN_CH(chan) (0xC0 | (4 * chan))
+#define ADS8688_CMD_DONT_CARE_BITS 16
+
+#define ADS8688_PROG_REG(x) (x << 9)
+#define ADS8688_PROG_REG_RANGE_CH(chan) (0x05 + chan)
+#define ADS8688_PROG_WR_BIT BIT(8)
+#define ADS8688_PROG_DONT_CARE_BITS 8
+
+#define ADS8688_REG_PLUSMINUS25VREF 0
+#define ADS8688_REG_PLUSMINUS125VREF 1
+#define ADS8688_REG_PLUSMINUS0625VREF 2
+#define ADS8688_REG_PLUS25VREF 5
+#define ADS8688_REG_PLUS125VREF 6
+
+#define ADS8688_VREF_MV 4096
+#define ADS8688_REALBITS 16
+
+/*
+ * enum ads8688_range - ADS8688 reference voltage range
+ * @ADS8688_PLUSMINUS25VREF: Device is configured for input range ±2.5 * VREF
+ * @ADS8688_PLUSMINUS125VREF: Device is configured for input range ±1.25 * VREF
+ * @ADS8688_PLUSMINUS0625VREF: Device is configured for input range ±0.625 * VREF
+ * @ADS8688_PLUS25VREF: Device is configured for input range 0 - 2.5 * VREF
+ * @ADS8688_PLUS125VREF: Device is configured for input range 0 - 1.25 * VREF
+ */
+enum ads8688_range {
+ ADS8688_PLUSMINUS25VREF,
+ ADS8688_PLUSMINUS125VREF,
+ ADS8688_PLUSMINUS0625VREF,
+ ADS8688_PLUS25VREF,
+ ADS8688_PLUS125VREF,
+};
+
+struct ads8688_chip_info {
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+};
+
+struct ads8688_state {
+ struct mutex lock;
+ const struct ads8688_chip_info *chip_info;
+ struct spi_device *spi;
+ struct regulator *reg;
+ unsigned int vref_mv;
+ enum ads8688_range range[8];
+ union {
+ __be32 d32;
+ u8 d8[4];
+ } data[2] ____cacheline_aligned;
+};
+
+enum ads8688_id {
+ ID_ADS8684,
+ ID_ADS8688,
+};
+
+struct ads8688_ranges {
+ enum ads8688_range range;
+ unsigned int scale;
+ int offset;
+ u8 reg;
+};
+
+static const struct ads8688_ranges ads8688_range_def[5] = {
+ {
+ .range = ADS8688_PLUSMINUS25VREF,
+ .scale = 76295,
+ .offset = -(1 << (ADS8688_REALBITS - 1)),
+ .reg = ADS8688_REG_PLUSMINUS25VREF,
+ }, {
+ .range = ADS8688_PLUSMINUS125VREF,
+ .scale = 38148,
+ .offset = -(1 << (ADS8688_REALBITS - 1)),
+ .reg = ADS8688_REG_PLUSMINUS125VREF,
+ }, {
+ .range = ADS8688_PLUSMINUS0625VREF,
+ .scale = 19074,
+ .offset = -(1 << (ADS8688_REALBITS - 1)),
+ .reg = ADS8688_REG_PLUSMINUS0625VREF,
+ }, {
+ .range = ADS8688_PLUS25VREF,
+ .scale = 38148,
+ .offset = 0,
+ .reg = ADS8688_REG_PLUS25VREF,
+ }, {
+ .range = ADS8688_PLUS125VREF,
+ .scale = 19074,
+ .offset = 0,
+ .reg = ADS8688_REG_PLUS125VREF,
+ }
+};
+
+static ssize_t ads8688_show_scales(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ads8688_state *st = iio_priv(dev_to_iio_dev(dev));
+
+ return sprintf(buf, "0.%09u 0.%09u 0.%09u\n",
+ ads8688_range_def[0].scale * st->vref_mv,
+ ads8688_range_def[1].scale * st->vref_mv,
+ ads8688_range_def[2].scale * st->vref_mv);
+}
+
+static ssize_t ads8688_show_offsets(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d %d\n", ads8688_range_def[0].offset,
+ ads8688_range_def[3].offset);
+}
+
+static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO,
+ ads8688_show_scales, NULL, 0);
+static IIO_DEVICE_ATTR(in_voltage_offset_available, S_IRUGO,
+ ads8688_show_offsets, NULL, 0);
+
+static struct attribute *ads8688_attributes[] = {
+ &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+ &iio_dev_attr_in_voltage_offset_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ads8688_attribute_group = {
+ .attrs = ads8688_attributes,
+};
+
+#define ADS8688_CHAN(index) \
+{ \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = index, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \
+ | BIT(IIO_CHAN_INFO_SCALE) \
+ | BIT(IIO_CHAN_INFO_OFFSET), \
+}
+
+static const struct iio_chan_spec ads8684_channels[] = {
+ ADS8688_CHAN(0),
+ ADS8688_CHAN(1),
+ ADS8688_CHAN(2),
+ ADS8688_CHAN(3),
+};
+
+static const struct iio_chan_spec ads8688_channels[] = {
+ ADS8688_CHAN(0),
+ ADS8688_CHAN(1),
+ ADS8688_CHAN(2),
+ ADS8688_CHAN(3),
+ ADS8688_CHAN(4),
+ ADS8688_CHAN(5),
+ ADS8688_CHAN(6),
+ ADS8688_CHAN(7),
+};
+
+static int ads8688_prog_write(struct iio_dev *indio_dev, unsigned int addr,
+ unsigned int val)
+{
+ struct ads8688_state *st = iio_priv(indio_dev);
+ u32 tmp;
+
+ tmp = ADS8688_PROG_REG(addr) | ADS8688_PROG_WR_BIT | val;
+ tmp <<= ADS8688_PROG_DONT_CARE_BITS;
+ st->data[0].d32 = cpu_to_be32(tmp);
+
+ return spi_write(st->spi, &st->data[0].d8[1], 3);
+}
+
+static int ads8688_reset(struct iio_dev *indio_dev)
+{
+ struct ads8688_state *st = iio_priv(indio_dev);
+ u32 tmp;
+
+ tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_RST);
+ tmp <<= ADS8688_CMD_DONT_CARE_BITS;
+ st->data[0].d32 = cpu_to_be32(tmp);
+
+ return spi_write(st->spi, &st->data[0].d8[0], 4);
+}
+
+static int ads8688_read(struct iio_dev *indio_dev, unsigned int chan)
+{
+ struct ads8688_state *st = iio_priv(indio_dev);
+ int ret;
+ u32 tmp;
+ struct spi_transfer t[] = {
+ {
+ .tx_buf = &st->data[0].d8[0],
+ .len = 4,
+ .cs_change = 1,
+ }, {
+ .tx_buf = &st->data[1].d8[0],
+ .rx_buf = &st->data[1].d8[0],
+ .len = 4,
+ },
+ };
+
+ tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_MAN_CH(chan));
+ tmp <<= ADS8688_CMD_DONT_CARE_BITS;
+ st->data[0].d32 = cpu_to_be32(tmp);
+
+ tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_NOOP);
+ tmp <<= ADS8688_CMD_DONT_CARE_BITS;
+ st->data[1].d32 = cpu_to_be32(tmp);
+
+ ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
+ if (ret < 0)
+ return ret;
+
+ return be32_to_cpu(st->data[1].d32) & 0xffff;
+}
+
+static int ads8688_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long m)
+{
+ int ret, offset;
+ unsigned long scale_mv;
+
+ struct ads8688_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&st->lock);
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ ret = ads8688_read(indio_dev, chan->channel);
+ mutex_unlock(&st->lock);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ scale_mv = st->vref_mv;
+ scale_mv *= ads8688_range_def[st->range[chan->channel]].scale;
+ *val = 0;
+ *val2 = scale_mv;
+ mutex_unlock(&st->lock);
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OFFSET:
+ offset = ads8688_range_def[st->range[chan->channel]].offset;
+ *val = offset;
+ mutex_unlock(&st->lock);
+ return IIO_VAL_INT;
+ }
+ mutex_unlock(&st->lock);
+
+ return -EINVAL;
+}
+
+static int ads8688_write_reg_range(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ enum ads8688_range range)
+{
+ unsigned int tmp;
+ int ret;
+
+ tmp = ADS8688_PROG_REG_RANGE_CH(chan->channel);
+ ret = ads8688_prog_write(indio_dev, tmp, range);
+
+ return ret;
+}
+
+static int ads8688_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct ads8688_state *st = iio_priv(indio_dev);
+ unsigned int scale = 0;
+ int ret = -EINVAL, i, offset = 0;
+
+ mutex_lock(&st->lock);
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ /* If the offset is 0 the ±2.5 * VREF mode is not available */
+ offset = ads8688_range_def[st->range[chan->channel]].offset;
+ if (offset == 0 && val2 == ads8688_range_def[0].scale * st->vref_mv) {
+ mutex_unlock(&st->lock);
+ return -EINVAL;
+ }
+
+ /* Lookup new mode */
+ for (i = 0; i < ARRAY_SIZE(ads8688_range_def); i++)
+ if (val2 == ads8688_range_def[i].scale * st->vref_mv &&
+ offset == ads8688_range_def[i].offset) {
+ ret = ads8688_write_reg_range(indio_dev, chan,
+ ads8688_range_def[i].reg);
+ break;
+ }
+ break;
+ case IIO_CHAN_INFO_OFFSET:
+ /*
+ * There are only two available offsets:
+ * 0 and -(1 << (ADS8688_REALBITS - 1))
+ */
+ if (!(ads8688_range_def[0].offset == val ||
+ ads8688_range_def[3].offset == val)) {
+ mutex_unlock(&st->lock);
+ return -EINVAL;
+ }
+
+ /*
+ * If the device are in ±2.5 * VREF mode, it's not allowed to
+ * switch to a mode where the offset is 0
+ */
+ if (val == 0 &&
+ st->range[chan->channel] == ADS8688_PLUSMINUS25VREF) {
+ mutex_unlock(&st->lock);
+ return -EINVAL;
+ }
+
+ scale = ads8688_range_def[st->range[chan->channel]].scale;
+
+ /* Lookup new mode */
+ for (i = 0; i < ARRAY_SIZE(ads8688_range_def); i++)
+ if (val == ads8688_range_def[i].offset &&
+ scale == ads8688_range_def[i].scale) {
+ ret = ads8688_write_reg_range(indio_dev, chan,
+ ads8688_range_def[i].reg);
+ break;
+ }
+ break;
+ }
+
+ if (!ret)
+ st->range[chan->channel] = ads8688_range_def[i].range;
+
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int ads8688_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OFFSET:
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info ads8688_info = {
+ .read_raw = &ads8688_read_raw,
+ .write_raw = &ads8688_write_raw,
+ .write_raw_get_fmt = &ads8688_write_raw_get_fmt,
+ .attrs = &ads8688_attribute_group,
+ .driver_module = THIS_MODULE,
+};
+
+static const struct ads8688_chip_info ads8688_chip_info_tbl[] = {
+ [ID_ADS8684] = {
+ .channels = ads8684_channels,
+ .num_channels = ARRAY_SIZE(ads8684_channels),
+ },
+ [ID_ADS8688] = {
+ .channels = ads8688_channels,
+ .num_channels = ARRAY_SIZE(ads8688_channels),
+ },
+};
+
+static int ads8688_probe(struct spi_device *spi)
+{
+ struct ads8688_state *st;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ st->reg = devm_regulator_get_optional(&spi->dev, "vref");
+ if (!IS_ERR(st->reg)) {
+ ret = regulator_enable(st->reg);
+ if (ret)
+ return ret;
+
+ ret = regulator_get_voltage(st->reg);
+ if (ret < 0)
+ goto error_out;
+
+ st->vref_mv = ret / 1000;
+ } else {
+ /* Use internal reference */
+ st->vref_mv = ADS8688_VREF_MV;
+ }
+
+ st->chip_info = &ads8688_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+
+ spi->mode = SPI_MODE_1;
+
+ spi_set_drvdata(spi, indio_dev);
+
+ st->spi = spi;
+
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
+ indio_dev->info = &ads8688_info;
+
+ ads8688_reset(indio_dev);
+
+ mutex_init(&st->lock);
+
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_out;
+
+ return 0;
+
+error_out:
+ if (!IS_ERR_OR_NULL(st->reg))
+ regulator_disable(st->reg);
+
+ return ret;
+}
+
+static int ads8688_remove(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev = spi_get_drvdata(spi);
+ struct ads8688_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ if (!IS_ERR_OR_NULL(st->reg))
+ regulator_disable(st->reg);
+
+ return 0;
+}
+
+static const struct spi_device_id ads8688_id[] = {
+ {"ads8684", ID_ADS8684},
+ {"ads8688", ID_ADS8688},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ads8688_id);
+
+static const struct of_device_id ads8688_of_match[] = {
+ { .compatible = "ti,ads8684" },
+ { .compatible = "ti,ads8688" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ads8688_of_match);
+
+static struct spi_driver ads8688_driver = {
+ .driver = {
+ .name = "ads8688",
+ .owner = THIS_MODULE,
+ },
+ .probe = ads8688_probe,
+ .remove = ads8688_remove,
+ .id_table = ads8688_id,
+};
+module_spi_driver(ads8688_driver);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean.nyekjaer@prevas.dk>");
+MODULE_DESCRIPTION("Texas Instruments ADS8688 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 02e636a1c49a..0a6beb3d99cb 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -803,7 +803,7 @@ err:
return ret;
}
-static struct iio_buffer_setup_ops xadc_buffer_ops = {
+static const struct iio_buffer_setup_ops xadc_buffer_ops = {
.preenable = &xadc_preenable,
.postenable = &iio_triggered_buffer_postenable,
.predisable = &iio_triggered_buffer_predisable,
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.