aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r--drivers/iio/adc/Kconfig80
-rw-r--r--drivers/iio/adc/Makefile7
-rw-r--r--drivers/iio/adc/ad7476.c20
-rw-r--r--drivers/iio/adc/ad7606.c583
-rw-r--r--drivers/iio/adc/ad7606.h99
-rw-r--r--drivers/iio/adc/ad7606_par.c105
-rw-r--r--drivers/iio/adc/ad7606_spi.c82
-rw-r--r--drivers/iio/adc/ad7768-1.c655
-rw-r--r--drivers/iio/adc/axp288_adc.c76
-rw-r--r--drivers/iio/adc/exynos_adc.c19
-rw-r--r--drivers/iio/adc/ingenic-adc.c364
-rw-r--r--drivers/iio/adc/lpc32xx_adc.c15
-rw-r--r--drivers/iio/adc/meson_saradc.c33
-rw-r--r--drivers/iio/adc/npcm_adc.c335
-rw-r--r--drivers/iio/adc/qcom-pm8xxx-xoadc.c10
-rw-r--r--drivers/iio/adc/ti-ads124s08.c376
-rw-r--r--drivers/iio/adc/ti-ads8688.c3
-rw-r--r--drivers/iio/adc/ti_am335x_adc.c5
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c4
19 files changed, 2826 insertions, 45 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7a3ca4ec0cb7..5debc67df70a 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -57,18 +57,48 @@ config AD7298
module will be called ad7298.
config AD7476
- tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
+ tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD an TI"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
- AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
- AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
+ Say yes here to build support for the following SPI analog to
+ digital converters (ADCs):
+ Analog Devices: AD7273, AD7274, AD7276, AD7277, AD7278, AD7475,
+ AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495, AD7910,
+ AD7920.
+ Texas Instruments: ADS7866, ADS7867, ADS7868.
To compile this driver as a module, choose M here: the
module will be called ad7476.
+config AD7606
+ tristate
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+config AD7606_IFACE_PARALLEL
+ tristate "Analog Devices AD7606 ADC driver with parallel interface support"
+ depends on HAS_IOMEM
+ select AD7606
+ help
+ Say yes here to build parallel interface support for Analog Devices:
+ ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7606_parallel.
+
+config AD7606_IFACE_SPI
+ tristate "Analog Devices AD7606 ADC driver with spi interface support"
+ depends on SPI
+ select AD7606
+ help
+ Say yes here to build spi interface support for Analog Devices:
+ ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7606_spi.
+
config AD7766
tristate "Analog Devices AD7766/AD7767 ADC driver"
depends on SPI_MASTER
@@ -81,6 +111,19 @@ config AD7766
To compile this driver as a module, choose M here: the module will be
called ad7766.
+config AD7768_1
+ tristate "Analog Devices AD7768-1 ADC driver"
+ depends on SPI
+ select IIO_BUFFER
+ select IIO_TRIGGER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Analog Devices AD7768-1 SPI
+ simultaneously sampling sigma-delta analog to digital converter (ADC).
+
+ To compile this driver as a module, choose M here: the module will be
+ called ad7768-1.
+
config AD7791
tristate "Analog Devices AD7791 ADC driver"
depends on SPI
@@ -367,6 +410,15 @@ config INA2XX_ADC
Say yes here to build support for TI INA2xx family of Power Monitors.
This driver is mutually exclusive with the HWMON version.
+config INGENIC_ADC
+ tristate "Ingenic JZ47xx SoCs ADC driver"
+ depends on MIPS || COMPILE_TEST
+ help
+ Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit.
+
+ This driver can also be built as a module. If so, the module will be
+ called ingenic_adc.
+
config IMX7D_ADC
tristate "Freescale IMX7D ADC driver"
depends on ARCH_MXC || COMPILE_TEST
@@ -576,6 +628,16 @@ config NAU7802
To compile this driver as a module, choose M here: the
module will be called nau7802.
+config NPCM_ADC
+ tristate "Nuvoton NPCM ADC driver"
+ depends on ARCH_NPCM || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say yes here to build support for Nuvoton NPCM ADC.
+
+ This driver can also be built as a module. If so, the module
+ will be called npcm_adc.
+
config PALMAS_GPADC
tristate "TI Palmas General Purpose ADC"
depends on MFD_PALMAS
@@ -908,6 +970,16 @@ config TI_ADS8688
This driver can also be built as a module. If so, the module will be
called ti-ads8688.
+config TI_ADS124S08
+ tristate "Texas Instruments ADS124S08"
+ depends on SPI && OF
+ help
+ If you say yes here you get support for Texas Instruments ADS124S08
+ and ADS124S06 ADC chips
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads124s08.
+
config TI_AM335X_ADC
tristate "TI's AM335X ADC driver"
depends on MFD_TI_AM335X_TSCADC && HAS_DMA
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 07df37f621bd..d50eb47da484 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -11,7 +11,11 @@ obj-$(CONFIG_AD7291) += ad7291.o
obj-$(CONFIG_AD7298) += ad7298.o
obj-$(CONFIG_AD7923) += ad7923.o
obj-$(CONFIG_AD7476) += ad7476.o
+obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
+obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
+obj-$(CONFIG_AD7606) += ad7606.o
obj-$(CONFIG_AD7766) += ad7766.o
+obj-$(CONFIG_AD7768_1) += ad7768-1.o
obj-$(CONFIG_AD7791) += ad7791.o
obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
@@ -36,6 +40,7 @@ obj-$(CONFIG_HI8435) += hi8435.o
obj-$(CONFIG_HX711) += hx711.o
obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
+obj-$(CONFIG_INGENIC_ADC) += ingenic-adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
@@ -55,6 +60,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_NPCM_ADC) += npcm_adc.o
obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o
obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
@@ -81,6 +87,7 @@ obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
+obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
obj-$(CONFIG_TI_TLC4541) += ti-tlc4541.o
obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
index 0549686b9ef8..76747488044b 100644
--- a/drivers/iio/adc/ad7476.c
+++ b/drivers/iio/adc/ad7476.c
@@ -59,6 +59,9 @@ enum ad7476_supported_device_ids {
ID_ADC081S,
ID_ADC101S,
ID_ADC121S,
+ ID_ADS7866,
+ ID_ADS7867,
+ ID_ADS7868,
};
static irqreturn_t ad7476_trigger_handler(int irq, void *p)
@@ -157,6 +160,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
#define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \
BIT(IIO_CHAN_INFO_RAW))
#define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0)
+#define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \
+ BIT(IIO_CHAN_INFO_RAW))
static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
[ID_AD7091R] = {
@@ -209,6 +214,18 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
.channel[0] = ADC081S_CHAN(12),
.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
},
+ [ID_ADS7866] = {
+ .channel[0] = ADS786X_CHAN(12),
+ .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+ },
+ [ID_ADS7867] = {
+ .channel[0] = ADS786X_CHAN(10),
+ .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+ },
+ [ID_ADS7868] = {
+ .channel[0] = ADS786X_CHAN(8),
+ .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
+ },
};
static const struct iio_info ad7476_info = {
@@ -314,6 +331,9 @@ static const struct spi_device_id ad7476_id[] = {
{"adc081s", ID_ADC081S},
{"adc101s", ID_ADC101S},
{"adc121s", ID_ADC121S},
+ {"ads7866", ID_ADS7866},
+ {"ads7867", ID_ADS7867},
+ {"ads7868", ID_ADS7868},
{}
};
MODULE_DEVICE_TABLE(spi, ad7476_id);
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
new file mode 100644
index 000000000000..ebb8de03bbce
--- /dev/null
+++ b/drivers/iio/adc/ad7606.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7606 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include "ad7606.h"
+
+/*
+ * Scales are computed as 5000/32768 and 10000/32768 respectively,
+ * so that when applied to the raw values they provide mV values
+ */
+static const unsigned int scale_avail[2] = {
+ 152588, 305176
+};
+
+static const unsigned int ad7606_oversampling_avail[7] = {
+ 1, 2, 4, 8, 16, 32, 64,
+};
+
+static int ad7606_reset(struct ad7606_state *st)
+{
+ if (st->gpio_reset) {
+ gpiod_set_value(st->gpio_reset, 1);
+ ndelay(100); /* t_reset >= 100ns */
+ gpiod_set_value(st->gpio_reset, 0);
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static int ad7606_read_samples(struct ad7606_state *st)
+{
+ unsigned int num = st->chip_info->num_channels;
+ u16 *data = st->data;
+ int ret;
+
+ /*
+ * The frstdata signal is set to high while and after reading the sample
+ * of the first channel and low for all other channels. This can be used
+ * to check that the incoming data is correctly aligned. During normal
+ * operation the data should never become unaligned, but some glitch or
+ * electrostatic discharge might cause an extra read or clock cycle.
+ * Monitoring the frstdata signal allows to recover from such failure
+ * situations.
+ */
+
+ if (st->gpio_frstdata) {
+ ret = st->bops->read_block(st->dev, 1, data);
+ if (ret)
+ return ret;
+
+ if (!gpiod_get_value(st->gpio_frstdata)) {
+ ad7606_reset(st);
+ return -EIO;
+ }
+
+ data++;
+ num--;
+ }
+
+ return st->bops->read_block(st->dev, num, data);
+}
+
+static irqreturn_t ad7606_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ad7606_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ ret = ad7606_read_samples(st);
+ if (ret == 0)
+ iio_push_to_buffers_with_timestamp(indio_dev, st->data,
+ iio_get_time_ns(indio_dev));
+
+ iio_trigger_notify_done(indio_dev->trig);
+ /* The rising edge of the CONVST signal starts a new conversion. */
+ gpiod_set_value(st->gpio_convst, 1);
+
+ mutex_unlock(&st->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+ int ret;
+
+ gpiod_set_value(st->gpio_convst, 1);
+ ret = wait_for_completion_timeout(&st->completion,
+ msecs_to_jiffies(1000));
+ if (!ret) {
+ ret = -ETIMEDOUT;
+ goto error_ret;
+ }
+
+ ret = ad7606_read_samples(st);
+ if (ret == 0)
+ ret = st->data[ch];
+
+error_ret:
+ gpiod_set_value(st->gpio_convst, 0);
+
+ return ret;
+}
+
+static int ad7606_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ int ret;
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = ad7606_scan_direct(indio_dev, chan->address);
+ iio_device_release_direct_mode(indio_dev);
+
+ if (ret < 0)
+ return ret;
+ *val = (short)ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = scale_avail[st->range];
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = st->oversampling;
+ return IIO_VAL_INT;
+ }
+ return -EINVAL;
+}
+
+static ssize_t in_voltage_scale_available_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int i, len = 0;
+
+ for (i = 0; i < ARRAY_SIZE(scale_avail); i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+ scale_avail[i]);
+
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
+
+static int ad7606_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+ DECLARE_BITMAP(values, 3);
+ int i;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ mutex_lock(&st->lock);
+ i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail));
+ gpiod_set_value(st->gpio_range, i);
+ st->range = i;
+ mutex_unlock(&st->lock);
+
+ return 0;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ if (val2)
+ return -EINVAL;
+ i = find_closest(val, ad7606_oversampling_avail,
+ ARRAY_SIZE(ad7606_oversampling_avail));
+
+ values[0] = i;
+
+ mutex_lock(&st->lock);
+ gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+ st->gpio_os->info, values);
+ st->oversampling = ad7606_oversampling_avail[i];
+ mutex_unlock(&st->lock);
+
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64");
+
+static struct attribute *ad7606_attributes_os_and_range[] = {
+ &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+ &iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os_and_range = {
+ .attrs = ad7606_attributes_os_and_range,
+};
+
+static struct attribute *ad7606_attributes_os[] = {
+ &iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_os = {
+ .attrs = ad7606_attributes_os,
+};
+
+static struct attribute *ad7606_attributes_range[] = {
+ &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ad7606_attribute_group_range = {
+ .attrs = ad7606_attributes_range,
+};
+
+#define AD760X_CHANNEL(num, mask) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = num, \
+ .address = num, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
+ .info_mask_shared_by_all = mask, \
+ .scan_index = num, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_CPU, \
+ }, \
+}
+
+#define AD7605_CHANNEL(num) \
+ AD760X_CHANNEL(num, 0)
+
+#define AD7606_CHANNEL(num) \
+ AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
+
+static const struct iio_chan_spec ad7605_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ AD7605_CHANNEL(0),
+ AD7605_CHANNEL(1),
+ AD7605_CHANNEL(2),
+ AD7605_CHANNEL(3),
+};
+
+static const struct iio_chan_spec ad7606_channels[] = {
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ AD7606_CHANNEL(0),
+ AD7606_CHANNEL(1),
+ AD7606_CHANNEL(2),
+ AD7606_CHANNEL(3),
+ AD7606_CHANNEL(4),
+ AD7606_CHANNEL(5),
+ AD7606_CHANNEL(6),
+ AD7606_CHANNEL(7),
+};
+
+static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
+ /* More devices added in future */
+ [ID_AD7605_4] = {
+ .channels = ad7605_channels,
+ .num_channels = 5,
+ },
+ [ID_AD7606_8] = {
+ .channels = ad7606_channels,
+ .num_channels = 9,
+ .has_oversampling = true,
+ },
+ [ID_AD7606_6] = {
+ .channels = ad7606_channels,
+ .num_channels = 7,
+ .has_oversampling = true,
+ },
+ [ID_AD7606_4] = {
+ .channels = ad7606_channels,
+ .num_channels = 5,
+ .has_oversampling = true,
+ },
+};
+
+static int ad7606_request_gpios(struct ad7606_state *st)
+{
+ struct device *dev = st->dev;
+
+ st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->gpio_convst))
+ return PTR_ERR(st->gpio_convst);
+
+ st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(st->gpio_reset))
+ return PTR_ERR(st->gpio_reset);
+
+ st->gpio_range = devm_gpiod_get_optional(dev, "adi,range",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->gpio_range))
+ return PTR_ERR(st->gpio_range);
+
+ st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(st->gpio_standby))
+ return PTR_ERR(st->gpio_standby);
+
+ st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data",
+ GPIOD_IN);
+ if (IS_ERR(st->gpio_frstdata))
+ return PTR_ERR(st->gpio_frstdata);
+
+ if (!st->chip_info->has_oversampling)
+ return 0;
+
+ st->gpio_os = devm_gpiod_get_array_optional(dev,
+ "adi,oversampling-ratio",
+ GPIOD_OUT_LOW);
+ return PTR_ERR_OR_ZERO(st->gpio_os);
+}
+
+/*
+ * The BUSY signal indicates when conversions are in progress, so when a rising
+ * edge of CONVST is applied, BUSY goes logic high and transitions low at the
+ * end of the entire conversion process. The falling edge of the BUSY signal
+ * triggers this interrupt.
+ */
+static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
+{
+ struct iio_dev *indio_dev = dev_id;
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ if (iio_buffer_enabled(indio_dev)) {
+ gpiod_set_value(st->gpio_convst, 0);
+ iio_trigger_poll_chained(st->trig);
+ } else {
+ complete(&st->completion);
+ }
+
+ return IRQ_HANDLED;
+};
+
+static int ad7606_validate_trigger(struct iio_dev *indio_dev,
+ struct iio_trigger *trig)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ if (st->trig != trig)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ iio_triggered_buffer_postenable(indio_dev);
+ gpiod_set_value(st->gpio_convst, 1);
+
+ return 0;
+}
+
+static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ gpiod_set_value(st->gpio_convst, 0);
+
+ return iio_triggered_buffer_predisable(indio_dev);
+}
+
+static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
+ .postenable = &ad7606_buffer_postenable,
+ .predisable = &ad7606_buffer_predisable,
+};
+
+static const struct iio_info ad7606_info_no_os_or_range = {
+ .read_raw = &ad7606_read_raw,
+ .validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os_and_range = {
+ .read_raw = &ad7606_read_raw,
+ .write_raw = &ad7606_write_raw,
+ .attrs = &ad7606_attribute_group_os_and_range,
+ .validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_os = {
+ .read_raw = &ad7606_read_raw,
+ .write_raw = &ad7606_write_raw,
+ .attrs = &ad7606_attribute_group_os,
+ .validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_info ad7606_info_range = {
+ .read_raw = &ad7606_read_raw,
+ .write_raw = &ad7606_write_raw,
+ .attrs = &ad7606_attribute_group_range,
+ .validate_trigger = &ad7606_validate_trigger,
+};
+
+static const struct iio_trigger_ops ad7606_trigger_ops = {
+ .validate_device = iio_trigger_validate_own_device,
+};
+
+static void ad7606_regulator_disable(void *data)
+{
+ struct ad7606_state *st = data;
+
+ regulator_disable(st->reg);
+}
+
+int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
+ const char *name, unsigned int id,
+ const struct ad7606_bus_ops *bops)
+{
+ struct ad7606_state *st;
+ int ret;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ dev_set_drvdata(dev, indio_dev);
+
+ st->dev = dev;
+ mutex_init(&st->lock);
+ st->bops = bops;
+ st->base_address = base_address;
+ /* tied to logic low, analog input range is +/- 5V */
+ st->range = 0;
+ st->oversampling = 1;
+
+ st->reg = devm_regulator_get(dev, "avcc");
+ if (IS_ERR(st->reg))
+ return PTR_ERR(st->reg);
+
+ ret = regulator_enable(st->reg);
+ if (ret) {
+ dev_err(dev, "Failed to enable specified AVcc supply\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st);
+ if (ret)
+ return ret;
+
+ st->chip_info = &ad7606_chip_info_tbl[id];
+
+ ret = ad7606_request_gpios(st);
+ if (ret)
+ return ret;
+
+ indio_dev->dev.parent = dev;
+ if (st->gpio_os) {
+ if (st->gpio_range)
+ indio_dev->info = &ad7606_info_os_and_range;
+ else
+ indio_dev->info = &ad7606_info_os;
+ } else {
+ if (st->gpio_range)
+ indio_dev->info = &ad7606_info_range;
+ else
+ indio_dev->info = &ad7606_info_no_os_or_range;
+ }
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->name = name;
+ indio_dev->channels = st->chip_info->channels;
+ indio_dev->num_channels = st->chip_info->num_channels;
+
+ init_completion(&st->completion);
+
+ ret = ad7606_reset(st);
+ if (ret)
+ dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
+
+ st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+ indio_dev->name, indio_dev->id);
+ if (!st->trig)
+ return -ENOMEM;
+
+ st->trig->ops = &ad7606_trigger_ops;
+ st->trig->dev.parent = dev;
+ iio_trigger_set_drvdata(st->trig, indio_dev);
+ ret = devm_iio_trigger_register(dev, st->trig);
+ if (ret)
+ return ret;
+
+ indio_dev->trig = iio_trigger_get(st->trig);
+
+ ret = devm_request_threaded_irq(dev, irq,
+ NULL,
+ &ad7606_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ name, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+ &iio_pollfunc_store_time,
+ &ad7606_trigger_handler,
+ &ad7606_buffer_ops);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(ad7606_probe);
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ad7606_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ if (st->gpio_standby) {
+ gpiod_set_value(st->gpio_range, 1);
+ gpiod_set_value(st->gpio_standby, 0);
+ }
+
+ return 0;
+}
+
+static int ad7606_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ if (st->gpio_standby) {
+ gpiod_set_value(st->gpio_range, st->range);
+ gpiod_set_value(st->gpio_standby, 1);
+ ad7606_reset(st);
+ }
+
+ return 0;
+}
+
+SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume);
+EXPORT_SYMBOL_GPL(ad7606_pm_ops);
+
+#endif
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
new file mode 100644
index 000000000000..5d12410f68e1
--- /dev/null
+++ b/drivers/iio/adc/ad7606.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AD7606 ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#ifndef IIO_ADC_AD7606_H_
+#define IIO_ADC_AD7606_H_
+
+/**
+ * struct ad7606_chip_info - chip specific information
+ * @channels: channel specification
+ * @num_channels: number of channels
+ * @has_oversampling: whether the device has oversampling support
+ */
+struct ad7606_chip_info {
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+ bool has_oversampling;
+};
+
+/**
+ * struct ad7606_state - driver instance specific data
+ * @dev pointer to kernel device
+ * @chip_info entry in the table of chips that describes this device
+ * @reg regulator info for the the power supply of the device
+ * @bops bus operations (SPI or parallel)
+ * @range voltage range selection, selects which scale to apply
+ * @oversampling oversampling selection
+ * @base_address address from where to read data in parallel operation
+ * @lock protect sensor state from concurrent accesses to GPIOs
+ * @gpio_convst GPIO descriptor for conversion start signal (CONVST)
+ * @gpio_reset GPIO descriptor for device hard-reset
+ * @gpio_range GPIO descriptor for range selection
+ * @gpio_standby GPIO descriptor for stand-by signal (STBY),
+ * controls power-down mode of device
+ * @gpio_frstdata GPIO descriptor for reading from device when data
+ * is being read on the first channel
+ * @gpio_os GPIO descriptors to control oversampling on the device
+ * @complete completion to indicate end of conversion
+ * @trig The IIO trigger associated with the device.
+ * @data buffer for reading data from the device
+ */
+struct ad7606_state {
+ struct device *dev;
+ const struct ad7606_chip_info *chip_info;
+ struct regulator *reg;
+ const struct ad7606_bus_ops *bops;
+ unsigned int range;
+ unsigned int oversampling;
+ void __iomem *base_address;
+
+ struct mutex lock; /* protect sensor state */
+ struct gpio_desc *gpio_convst;
+ struct gpio_desc *gpio_reset;
+ struct gpio_desc *gpio_range;
+ struct gpio_desc *gpio_standby;
+ struct gpio_desc *gpio_frstdata;
+ struct gpio_descs *gpio_os;
+ struct iio_trigger *trig;
+ struct completion completion;
+
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ * 8 * 16-bit samples + 64-bit timestamp
+ */
+ unsigned short data[12] ____cacheline_aligned;
+};
+
+/**
+ * struct ad7606_bus_ops - driver bus operations
+ * @read_block function pointer for reading blocks of data
+ */
+struct ad7606_bus_ops {
+ /* more methods added in future? */
+ int (*read_block)(struct device *dev, int num, void *data);
+};
+
+int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
+ const char *name, unsigned int id,
+ const struct ad7606_bus_ops *bops);
+
+enum ad7606_supported_device_ids {
+ ID_AD7605_4,
+ ID_AD7606_8,
+ ID_AD7606_6,
+ ID_AD7606_4
+};
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops ad7606_pm_ops;
+#define AD7606_PM_OPS (&ad7606_pm_ops)
+#else
+#define AD7606_PM_OPS NULL
+#endif
+
+#endif /* IIO_ADC_AD7606_H_ */
diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c
new file mode 100644
index 000000000000..1b08028facde
--- /dev/null
+++ b/drivers/iio/adc/ad7606_par.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7606 Parallel Interface ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <linux/iio/iio.h>
+#include "ad7606.h"
+
+static int ad7606_par16_read_block(struct device *dev,
+ int count, void *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ insw((unsigned long)st->base_address, buf, count);
+
+ return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_par16_bops = {
+ .read_block = ad7606_par16_read_block,
+};
+
+static int ad7606_par8_read_block(struct device *dev,
+ int count, void *buf)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct ad7606_state *st = iio_priv(indio_dev);
+
+ insb((unsigned long)st->base_address, buf, count * 2);
+
+ return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_par8_bops = {
+ .read_block = ad7606_par8_read_block,
+};
+
+static int ad7606_par_probe(struct platform_device *pdev)
+{
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ struct resource *res;
+ void __iomem *addr;
+ resource_size_t remap_size;
+ int irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq: %d\n", irq);
+ return irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(addr))
+ return PTR_ERR(addr);
+
+ remap_size = resource_size(res);
+
+ return ad7606_probe(&pdev->dev, irq, addr,
+ id->name, id->driver_data,
+ remap_size > 1 ? &ad7606_par16_bops :
+ &ad7606_par8_bops);
+}
+
+static const struct platform_device_id ad7606_driver_ids[] = {
+ { .name = "ad7605-4", .driver_data = ID_AD7605_4, },
+ { .name = "ad7606-4", .driver_data = ID_AD7606_4, },
+ { .name = "ad7606-6", .driver_data = ID_AD7606_6, },
+ { .name = "ad7606-8", .driver_data = ID_AD7606_8, },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, ad7606_driver_ids);
+
+static const struct of_device_id ad7606_of_match[] = {
+ { .compatible = "adi,ad7605-4" },
+ { .compatible = "adi,ad7606-4" },
+ { .compatible = "adi,ad7606-6" },
+ { .compatible = "adi,ad7606-8" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ad7606_of_match);
+
+static struct platform_driver ad7606_driver = {
+ .probe = ad7606_par_probe,
+ .id_table = ad7606_driver_ids,
+ .driver = {
+ .name = "ad7606",
+ .pm = AD7606_PM_OPS,
+ .of_match_table = ad7606_of_match,
+ },
+};
+module_platform_driver(ad7606_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
new file mode 100644
index 000000000000..4fd0ec36a086
--- /dev/null
+++ b/drivers/iio/adc/ad7606_spi.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7606 SPI ADC driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include "ad7606.h"
+
+#define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */
+
+static int ad7606_spi_read_block(struct device *dev,
+ int count, void *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ int i, ret;
+ unsigned short *data = buf;
+ __be16 *bdata = buf;
+
+ ret = spi_read(spi, buf, count * 2);
+ if (ret < 0) {
+ dev_err(&spi->dev, "SPI read error\n");
+ return ret;
+ }
+
+ for (i = 0; i < count; i++)
+ data[i] = be16_to_cpu(bdata[i]);
+
+ return 0;
+}
+
+static const struct ad7606_bus_ops ad7606_spi_bops = {
+ .read_block = ad7606_spi_read_block,
+};
+
+static int ad7606_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ return ad7606_probe(&spi->dev, spi->irq, NULL,
+ id->name, id->driver_data,
+ &ad7606_spi_bops);
+}
+
+static const struct spi_device_id ad7606_id_table[] = {
+ { "ad7605-4", ID_AD7605_4 },
+ { "ad7606-4", ID_AD7606_4 },
+ { "ad7606-6", ID_AD7606_6 },
+ { "ad7606-8", ID_AD7606_8 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad7606_id_table);
+
+static const struct of_device_id ad7606_of_match[] = {
+ { .compatible = "adi,ad7605-4" },
+ { .compatible = "adi,ad7606-4" },
+ { .compatible = "adi,ad7606-6" },
+ { .compatible = "adi,ad7606-8" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ad7606_of_match);
+
+static struct spi_driver ad7606_driver = {
+ .driver = {
+ .name = "ad7606",
+ .of_match_table = ad7606_of_match,
+ .pm = AD7606_PM_OPS,
+ },
+ .probe = ad7606_spi_probe,
+ .id_table = ad7606_id_table,
+};
+module_spi_driver(ad7606_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
new file mode 100644
index 000000000000..0d132708c429
--- /dev/null
+++ b/drivers/iio/adc/ad7768-1.c
@@ -0,0 +1,655 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices AD7768-1 SPI ADC driver
+ *
+ * Copyright 2017 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+/* AD7768 registers definition */
+#define AD7768_REG_CHIP_TYPE 0x3
+#define AD7768_REG_PROD_ID_L 0x4
+#define AD7768_REG_PROD_ID_H 0x5
+#define AD7768_REG_CHIP_GRADE 0x6
+#define AD7768_REG_SCRATCH_PAD 0x0A
+#define AD7768_REG_VENDOR_L 0x0C
+#define AD7768_REG_VENDOR_H 0x0D
+#define AD7768_REG_INTERFACE_FORMAT 0x14
+#define AD7768_REG_POWER_CLOCK 0x15
+#define AD7768_REG_ANALOG 0x16
+#define AD7768_REG_ANALOG2 0x17
+#define AD7768_REG_CONVERSION 0x18
+#define AD7768_REG_DIGITAL_FILTER 0x19
+#define AD7768_REG_SINC3_DEC_RATE_MSB 0x1A
+#define AD7768_REG_SINC3_DEC_RATE_LSB 0x1B
+#define AD7768_REG_DUTY_CYCLE_RATIO 0x1C
+#define AD7768_REG_SYNC_RESET 0x1D
+#define AD7768_REG_GPIO_CONTROL 0x1E
+#define AD7768_REG_GPIO_WRITE 0x1F
+#define AD7768_REG_GPIO_READ 0x20
+#define AD7768_REG_OFFSET_HI 0x21
+#define AD7768_REG_OFFSET_MID 0x22
+#define AD7768_REG_OFFSET_LO 0x23
+#define AD7768_REG_GAIN_HI 0x24
+#define AD7768_REG_GAIN_MID 0x25
+#define AD7768_REG_GAIN_LO 0x26
+#define AD7768_REG_SPI_DIAG_ENABLE 0x28
+#define AD7768_REG_ADC_DIAG_ENABLE 0x29
+#define AD7768_REG_DIG_DIAG_ENABLE 0x2A
+#define AD7768_REG_ADC_DATA 0x2C
+#define AD7768_REG_MASTER_STATUS 0x2D
+#define AD7768_REG_SPI_DIAG_STATUS 0x2E
+#define AD7768_REG_ADC_DIAG_STATUS 0x2F
+#define AD7768_REG_DIG_DIAG_STATUS 0x30
+#define AD7768_REG_MCLK_COUNTER 0x31
+
+/* AD7768_REG_POWER_CLOCK */
+#define AD7768_PWR_MCLK_DIV_MSK GENMASK(5, 4)
+#define AD7768_PWR_MCLK_DIV(x) FIELD_PREP(AD7768_PWR_MCLK_DIV_MSK, x)
+#define AD7768_PWR_PWRMODE_MSK GENMASK(1, 0)
+#define AD7768_PWR_PWRMODE(x) FIELD_PREP(AD7768_PWR_PWRMODE_MSK, x)
+
+/* AD7768_REG_DIGITAL_FILTER */
+#define AD7768_DIG_FIL_FIL_MSK GENMASK(6, 4)
+#define AD7768_DIG_FIL_FIL(x) FIELD_PREP(AD7768_DIG_FIL_FIL_MSK, x)
+#define AD7768_DIG_FIL_DEC_MSK GENMASK(2, 0)
+#define AD7768_DIG_FIL_DEC_RATE(x) FIELD_PREP(AD7768_DIG_FIL_DEC_MSK, x)
+
+/* AD7768_REG_CONVERSION */
+#define AD7768_CONV_MODE_MSK GENMASK(2, 0)
+#define AD7768_CONV_MODE(x) FIELD_PREP(AD7768_CONV_MODE_MSK, x)
+
+#define AD7768_RD_FLAG_MSK(x) (BIT(6) | ((x) & 0x3F))
+#define AD7768_WR_FLAG_MSK(x) ((x) & 0x3F)
+
+enum ad7768_conv_mode {
+ AD7768_CONTINUOUS,
+ AD7768_ONE_SHOT,
+ AD7768_SINGLE,
+ AD7768_PERIODIC,
+ AD7768_STANDBY
+};
+
+enum ad7768_pwrmode {
+ AD7768_ECO_MODE = 0,
+ AD7768_MED_MODE = 2,
+ AD7768_FAST_MODE = 3
+};
+
+enum ad7768_mclk_div {
+ AD7768_MCLK_DIV_16,
+ AD7768_MCLK_DIV_8,
+ AD7768_MCLK_DIV_4,
+ AD7768_MCLK_DIV_2
+};
+
+enum ad7768_dec_rate {
+ AD7768_DEC_RATE_32 = 0,
+ AD7768_DEC_RATE_64 = 1,
+ AD7768_DEC_RATE_128 = 2,
+ AD7768_DEC_RATE_256 = 3,
+ AD7768_DEC_RATE_512 = 4,
+ AD7768_DEC_RATE_1024 = 5,
+ AD7768_DEC_RATE_8 = 9,
+ AD7768_DEC_RATE_16 = 10
+};
+
+struct ad7768_clk_configuration {
+ enum ad7768_mclk_div mclk_div;
+ enum ad7768_dec_rate dec_rate;
+ unsigned int clk_div;
+ enum ad7768_pwrmode pwrmode;
+};
+
+static const struct ad7768_clk_configuration ad7768_clk_config[] = {
+ { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_8, 16, AD7768_FAST_MODE },
+ { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_16, 32, AD7768_FAST_MODE },
+ { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_32, 64, AD7768_FAST_MODE },
+ { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_64, 128, AD7768_FAST_MODE },
+ { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_128, 256, AD7768_FAST_MODE },
+ { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_128, 512, AD7768_MED_MODE },
+ { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_256, 1024, AD7768_MED_MODE },
+ { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_512, 2048, AD7768_MED_MODE },
+ { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_1024, 4096, AD7768_MED_MODE },
+ { AD7768_MCLK_DIV_8, AD7768_DEC_RATE_1024, 8192, AD7768_MED_MODE },
+ { AD7768_MCLK_DIV_16, AD7768_DEC_RATE_1024, 16384, AD7768_ECO_MODE },
+};
+
+static const struct iio_chan_spec ad7768_channels[] = {
+ {
+ .type = IIO_VOLTAGE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .indexed = 1,
+ .channel = 0,
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 24,
+ .storagebits = 32,
+ .shift = 8,
+ .endianness = IIO_BE,
+ },
+ },
+};
+
+struct ad7768_state {
+ struct spi_device *spi;
+ struct regulator *vref;
+ struct mutex lock;
+ struct clk *mclk;
+ unsigned int mclk_freq;
+ unsigned int samp_freq;
+ struct completion completion;
+ struct iio_trigger *trig;
+ struct gpio_desc *gpio_sync_in;
+ /*
+ * DMA (thus cache coherency maintenance) requires the
+ * transfer buffers to live in their own cache lines.
+ */
+ union {
+ __be32 d32;
+ u8 d8[2];
+ } data ____cacheline_aligned;
+};
+
+static int ad7768_spi_reg_read(struct ad7768_state *st, unsigned int addr,
+ unsigned int len)
+{
+ unsigned int shift;
+ int ret;
+
+ shift = 32 - (8 * len);
+ st->data.d8[0] = AD7768_RD_FLAG_MSK(addr);
+
+ ret = spi_write_then_read(st->spi, st->data.d8, 1,
+ &st->data.d32, len);
+ if (ret < 0)
+ return ret;
+
+ return (be32_to_cpu(st->data.d32) >> shift);
+}
+
+static int ad7768_spi_reg_write(struct ad7768_state *st,
+ unsigned int addr,
+ unsigned int val)
+{
+ st->data.d8[0] = AD7768_WR_FLAG_MSK(addr);
+ st->data.d8[1] = val & 0xFF;
+
+ return spi_write(st->spi, st->data.d8, 2);
+}
+
+static int ad7768_set_mode(struct ad7768_state *st,
+ enum ad7768_conv_mode mode)
+{
+ int regval;
+
+ regval = ad7768_spi_reg_read(st, AD7768_REG_CONVERSION, 1);
+ if (regval < 0)
+ return regval;
+
+ regval &= ~AD7768_CONV_MODE_MSK;
+ regval |= AD7768_CONV_MODE(mode);
+
+ return ad7768_spi_reg_write(st, AD7768_REG_CONVERSION, regval);
+}
+
+static int ad7768_scan_direct(struct iio_dev *indio_dev)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+ int readval, ret;
+
+ reinit_completion(&st->completion);
+
+ ret = ad7768_set_mode(st, AD7768_ONE_SHOT);
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&st->completion,
+ msecs_to_jiffies(1000));
+ if (!ret)
+ return -ETIMEDOUT;
+
+ readval = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
+ if (readval < 0)
+ return readval;
+ /*
+ * Any SPI configuration of the AD7768-1 can only be
+ * performed in continuous conversion mode.
+ */
+ ret = ad7768_set_mode(st, AD7768_CONTINUOUS);
+ if (ret < 0)
+ return ret;
+
+ return readval;
+}
+
+static int ad7768_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg,
+ unsigned int writeval,
+ unsigned int *readval)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+ if (readval) {
+ ret = ad7768_spi_reg_read(st, reg, 1);
+ if (ret < 0)
+ goto err_unlock;
+ *readval = ret;
+ ret = 0;
+ } else {
+ ret = ad7768_spi_reg_write(st, reg, writeval);
+ }
+err_unlock:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int ad7768_set_dig_fil(struct ad7768_state *st,
+ enum ad7768_dec_rate dec_rate)
+{
+ unsigned int mode;
+ int ret;
+
+ if (dec_rate == AD7768_DEC_RATE_8 || dec_rate == AD7768_DEC_RATE_16)
+ mode = AD7768_DIG_FIL_FIL(dec_rate);
+ else
+ mode = AD7768_DIG_FIL_DEC_RATE(dec_rate);
+
+ ret = ad7768_spi_reg_write(st, AD7768_REG_DIGITAL_FILTER, mode);
+ if (ret < 0)
+ return ret;
+
+ /* A sync-in pulse is required every time the filter dec rate changes */
+ gpiod_set_value(st->gpio_sync_in, 1);
+ gpiod_set_value(st->gpio_sync_in, 0);
+
+ return 0;
+}
+
+static int ad7768_set_freq(struct ad7768_state *st,
+ unsigned int freq)
+{
+ unsigned int diff_new, diff_old, pwr_mode, i, idx;
+ int res, ret;
+
+ diff_old = U32_MAX;
+ idx = 0;
+
+ res = DIV_ROUND_CLOSEST(st->mclk_freq, freq);
+
+ /* Find the closest match for the desired sampling frequency */
+ for (i = 0; i < ARRAY_SIZE(ad7768_clk_config); i++) {
+ diff_new = abs(res - ad7768_clk_config[i].clk_div);
+ if (diff_new < diff_old) {
+ diff_old = diff_new;
+ idx = i;
+ }
+ }
+
+ /*
+ * Set both the mclk_div and pwrmode with a single write to the
+ * POWER_CLOCK register
+ */
+ pwr_mode = AD7768_PWR_MCLK_DIV(ad7768_clk_config[idx].mclk_div) |
+ AD7768_PWR_PWRMODE(ad7768_clk_config[idx].pwrmode);
+ ret = ad7768_spi_reg_write(st, AD7768_REG_POWER_CLOCK, pwr_mode);
+ if (ret < 0)
+ return ret;
+
+ ret = ad7768_set_dig_fil(st, ad7768_clk_config[idx].dec_rate);
+ if (ret < 0)
+ return ret;
+
+ st->samp_freq = DIV_ROUND_CLOSEST(st->mclk_freq,
+ ad7768_clk_config[idx].clk_div);
+
+ return 0;
+}
+
+static ssize_t ad7768_sampling_freq_avail(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7768_state *st = iio_priv(indio_dev);
+ unsigned int freq;
+ int i, len = 0;
+
+ for (i = 0; i < ARRAY_SIZE(ad7768_clk_config); i++) {
+ freq = DIV_ROUND_CLOSEST(st->mclk_freq,
+ ad7768_clk_config[i].clk_div);
+ len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", freq);
+ }
+
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(ad7768_sampling_freq_avail);
+
+static int ad7768_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long info)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+ int scale_uv, ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = ad7768_scan_direct(indio_dev);
+ if (ret >= 0)
+ *val = ret;
+
+ iio_device_release_direct_mode(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ scale_uv = regulator_get_voltage(st->vref);
+ if (scale_uv < 0)
+ return scale_uv;
+
+ *val = (scale_uv * 2) / 1000;
+ *val2 = chan->scan_type.realbits;
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = st->samp_freq;
+
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static int ad7768_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long info)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+
+ switch (info) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return ad7768_set_freq(st, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static struct attribute *ad7768_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group ad7768_group = {
+ .attrs = ad7768_attributes,
+};
+
+static const struct iio_info ad7768_info = {
+ .attrs = &ad7768_group,
+ .read_raw = &ad7768_read_raw,
+ .write_raw = &ad7768_write_raw,
+ .debugfs_reg_access = &ad7768_reg_access,
+};
+
+static int ad7768_setup(struct ad7768_state *st)
+{
+ int ret;
+
+ /*
+ * Two writes to the SPI_RESET[1:0] bits are required to initiate
+ * a software reset. The bits must first be set to 11, and then
+ * to 10. When the sequence is detected, the reset occurs.
+ * See the datasheet, page 70.
+ */
+ ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x3);
+ if (ret)
+ return ret;
+
+ ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x2);
+ if (ret)
+ return ret;
+
+ st->gpio_sync_in = devm_gpiod_get(&st->spi->dev, "adi,sync-in",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(st->gpio_sync_in))
+ return PTR_ERR(st->gpio_sync_in);
+
+ /* Set the default sampling frequency to 32000 kSPS */
+ return ad7768_set_freq(st, 32000);
+}
+
+static irqreturn_t ad7768_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ad7768_state *st = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&st->lock);
+
+ ret = spi_read(st->spi, &st->data.d32, 3);
+ if (ret < 0)
+ goto err_unlock;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &st->data.d32,
+ iio_get_time_ns(indio_dev));
+
+ iio_trigger_notify_done(indio_dev->trig);
+err_unlock:
+ mutex_unlock(&st->lock);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ad7768_interrupt(int irq, void *dev_id)
+{
+ struct iio_dev *indio_dev = dev_id;
+ struct ad7768_state *st = iio_priv(indio_dev);
+
+ if (iio_buffer_enabled(indio_dev))
+ iio_trigger_poll(st->trig);
+ else
+ complete(&st->completion);
+
+ return IRQ_HANDLED;
+};
+
+static int ad7768_buffer_postenable(struct iio_dev *indio_dev)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+
+ iio_triggered_buffer_postenable(indio_dev);
+ /*
+ * Write a 1 to the LSB of the INTERFACE_FORMAT register to enter
+ * continuous read mode. Subsequent data reads do not require an
+ * initial 8-bit write to query the ADC_DATA register.
+ */
+ return ad7768_spi_reg_write(st, AD7768_REG_INTERFACE_FORMAT, 0x01);
+}
+
+static int ad7768_buffer_predisable(struct iio_dev *indio_dev)
+{
+ struct ad7768_state *st = iio_priv(indio_dev);
+ int ret;
+
+ /*
+ * To exit continuous read mode, perform a single read of the ADC_DATA
+ * reg (0x2C), which allows further configuration of the device.
+ */
+ ret = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
+ if (ret < 0)
+ return ret;
+
+ return iio_triggered_buffer_predisable(indio_dev);
+}
+
+static const struct iio_buffer_setup_ops ad7768_buffer_ops = {
+ .postenable = &ad7768_buffer_postenable,
+ .predisable = &ad7768_buffer_predisable,
+};
+
+static const struct iio_trigger_ops ad7768_trigger_ops = {
+ .validate_device = iio_trigger_validate_own_device,
+};
+
+static void ad7768_regulator_disable(void *data)
+{
+ struct ad7768_state *st = data;
+
+ regulator_disable(st->vref);
+}
+
+static void ad7768_clk_disable(void *data)
+{
+ struct ad7768_state *st = data;
+
+ clk_disable_unprepare(st->mclk);
+}
+
+static int ad7768_probe(struct spi_device *spi)
+{
+ struct ad7768_state *st;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ st->spi = spi;
+
+ st->vref = devm_regulator_get(&spi->dev, "vref");
+ if (IS_ERR(st->vref))
+ return PTR_ERR(st->vref);
+
+ ret = regulator_enable(st->vref);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to enable specified vref supply\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7768_regulator_disable, st);
+ if (ret)
+ return ret;
+
+ st->mclk = devm_clk_get(&spi->dev, "mclk");
+ if (IS_ERR(st->mclk))
+ return PTR_ERR(st->mclk);
+
+ ret = clk_prepare_enable(st->mclk);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7768_clk_disable, st);
+ if (ret)
+ return ret;
+
+ st->mclk_freq = clk_get_rate(st->mclk);
+
+ spi_set_drvdata(spi, indio_dev);
+ mutex_init(&st->lock);
+
+ indio_dev->channels = ad7768_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad7768_channels);
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->name = spi_get_device_id(spi)->name;
+ indio_dev->info = &ad7768_info;
+ indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_TRIGGERED;
+
+ ret = ad7768_setup(st);
+ if (ret < 0) {
+ dev_err(&spi->dev, "AD7768 setup failed\n");
+ return ret;
+ }
+
+ st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
+ indio_dev->name, indio_dev->id);
+ if (!st->trig)
+ return -ENOMEM;
+
+ st->trig->ops = &ad7768_trigger_ops;
+ st->trig->dev.parent = &spi->dev;
+ iio_trigger_set_drvdata(st->trig, indio_dev);
+ ret = devm_iio_trigger_register(&spi->dev, st->trig);
+ if (ret)
+ return ret;
+
+ indio_dev->trig = iio_trigger_get(st->trig);
+
+ init_completion(&st->completion);
+
+ ret = devm_request_irq(&spi->dev, spi->irq,
+ &ad7768_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ indio_dev->name, indio_dev);
+ if (ret)
+ return ret;
+
+ ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+ &iio_pollfunc_store_time,
+ &ad7768_trigger_handler,
+ &ad7768_buffer_ops);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ad7768_id_table[] = {
+ { "ad7768-1", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ad7768_id_table);
+
+static const struct of_device_id ad7768_of_match[] = {
+ { .compatible = "adi,ad7768-1" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ad7768_of_match);
+
+static struct spi_driver ad7768_driver = {
+ .driver = {
+ .name = "ad7768-1",
+ .of_match_table = ad7768_of_match,
+ },
+ .probe = ad7768_probe,
+ .id_table = ad7768_id_table,
+};
+module_spi_driver(ad7768_driver);
+
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7768-1 ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 031d568b4972..4e339cfd0c54 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -27,9 +27,18 @@
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
-#define AXP288_ADC_EN_MASK 0xF1
-#define AXP288_ADC_TS_PIN_GPADC 0xF2
-#define AXP288_ADC_TS_PIN_ON 0xF3
+/*
+ * This mask enables all ADCs except for the battery temp-sensor (TS), that is
+ * left as-is to avoid breaking charging on devices without a temp-sensor.
+ */
+#define AXP288_ADC_EN_MASK 0xF0
+#define AXP288_ADC_TS_ENABLE 0x01
+
+#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK GENMASK(1, 0)
+#define AXP288_ADC_TS_CURRENT_OFF (0 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING (1 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND (2 << 0)
+#define AXP288_ADC_TS_CURRENT_ON (3 << 0)
enum axp288_adc_id {
AXP288_ADC_TS,
@@ -44,6 +53,7 @@ enum axp288_adc_id {
struct axp288_adc_info {
int irq;
struct regmap *regmap;
+ bool ts_enabled;
};
static const struct iio_chan_spec axp288_adc_channels[] = {
@@ -115,21 +125,33 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
return IIO_VAL_INT;
}
-static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
- unsigned long address)
+/*
+ * The current-source used for the battery temp-sensor (TS) is shared
+ * with the GPADC. For proper fuel-gauge and charger operation the TS
+ * current-source needs to be permanently on. But to read the GPADC we
+ * need to temporary switch the TS current-source to ondemand, so that
+ * the GPADC can use it, otherwise we will always read an all 0 value.
+ */
+static int axp288_adc_set_ts(struct axp288_adc_info *info,
+ unsigned int mode, unsigned long address)
{
int ret;
- /* channels other than GPADC do not need to switch TS pin */
+ /* No need to switch the current-source if the TS pin is disabled */
+ if (!info->ts_enabled)
+ return 0;
+
+ /* Channels other than GPADC do not need the current source */
if (address != AXP288_GP_ADC_H)
return 0;
- ret = regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+ ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+ AXP288_ADC_TS_CURRENT_ON_OFF_MASK, mode);
if (ret)
return ret;
/* When switching to the GPADC pin give things some time to settle */
- if (mode == AXP288_ADC_TS_PIN_GPADC)
+ if (mode == AXP288_ADC_TS_CURRENT_ON_ONDEMAND)
usleep_range(6000, 10000);
return 0;
@@ -145,14 +167,14 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
mutex_lock(&indio_dev->mlock);
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+ if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON_ONDEMAND,
chan->address)) {
dev_err(&indio_dev->dev, "GPADC mode\n");
ret = -EINVAL;
break;
}
ret = axp288_adc_read_channel(val, chan->address, info->regmap);
- if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+ if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON,
chan->address))
dev_err(&indio_dev->dev, "TS pin restore\n");
break;
@@ -164,13 +186,35 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
return ret;
}
-static int axp288_adc_set_state(struct regmap *regmap)
+static int axp288_adc_initialize(struct axp288_adc_info *info)
{
- /* ADC should be always enabled for internal FG to function */
- if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
- return -EIO;
+ int ret, adc_enable_val;
+
+ /*
+ * Determine if the TS pin is enabled and set the TS current-source
+ * accordingly.
+ */
+ ret = regmap_read(info->regmap, AXP20X_ADC_EN1, &adc_enable_val);
+ if (ret)
+ return ret;
+
+ if (adc_enable_val & AXP288_ADC_TS_ENABLE) {
+ info->ts_enabled = true;
+ ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+ AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+ AXP288_ADC_TS_CURRENT_ON);
+ } else {
+ info->ts_enabled = false;
+ ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
+ AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+ AXP288_ADC_TS_CURRENT_OFF);
+ }
+ if (ret)
+ return ret;
- return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+ /* Turn on the ADC for all channels except TS, leave TS as is */
+ return regmap_update_bits(info->regmap, AXP20X_ADC_EN1,
+ AXP288_ADC_EN_MASK, AXP288_ADC_EN_MASK);
}
static const struct iio_info axp288_adc_iio_info = {
@@ -200,7 +244,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
* Set ADC to enabled state at all time, including system suspend.
* otherwise internal fuel gauge functionality may be affected.
*/
- ret = axp288_adc_set_state(axp20x->regmap);
+ ret = axp288_adc_initialize(info);
if (ret) {
dev_err(&pdev->dev, "unable to enable ADC device\n");
return ret;
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index fa2d2b5767f3..1ca2c4d39f87 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -115,6 +115,7 @@
#define MAX_ADC_V2_CHANNELS 10
#define MAX_ADC_V1_CHANNELS 8
#define MAX_EXYNOS3250_ADC_CHANNELS 2
+#define MAX_EXYNOS4212_ADC_CHANNELS 4
#define MAX_S5PV210_ADC_CHANNELS 10
/* Bit definitions common for ADC_V1 and ADC_V2 */
@@ -271,6 +272,19 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info,
writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
}
+/* Exynos4212 and 4412 is like ADCv1 but with four channels only */
+static const struct exynos_adc_data exynos4212_adc_data = {
+ .num_channels = MAX_EXYNOS4212_ADC_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+ .needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .clear_irq = exynos_adc_v1_clear_irq,
+ .start_conv = exynos_adc_v1_start_conv,
+};
+
static const struct exynos_adc_data exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
@@ -493,6 +507,9 @@ static const struct of_device_id exynos_adc_match[] = {
.compatible = "samsung,s5pv210-adc",
.data = &exynos_adc_s5pv210_data,
}, {
+ .compatible = "samsung,exynos4212-adc",
+ .data = &exynos4212_adc_data,
+ }, {
.compatible = "samsung,exynos-adc-v1",
.data = &exynos_adc_v1_data,
}, {
@@ -929,7 +946,7 @@ static int exynos_adc_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
- if (IS_REACHABLE(CONFIG_INPUT)) {
+ if (IS_REACHABLE(CONFIG_INPUT) && info->input) {
free_irq(info->tsirq, info);
input_unregister_device(info->input);
}
diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
new file mode 100644
index 000000000000..6ee1673deb0d
--- /dev/null
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADC driver for the Ingenic JZ47xx SoCs
+ * Copyright (c) 2019 Artur Rojek <contact@artur-rojek.eu>
+ *
+ * based on drivers/mfd/jz4740-adc.c
+ */
+
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <linux/clk.h>
+#include <linux/iio/iio.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#define JZ_ADC_REG_ENABLE 0x00
+#define JZ_ADC_REG_CFG 0x04
+#define JZ_ADC_REG_CTRL 0x08
+#define JZ_ADC_REG_STATUS 0x0c
+#define JZ_ADC_REG_ADTCH 0x18
+#define JZ_ADC_REG_ADBDAT 0x1c
+#define JZ_ADC_REG_ADSDAT 0x20
+
+#define JZ_ADC_REG_CFG_BAT_MD BIT(4)
+
+#define JZ_ADC_AUX_VREF 3300
+#define JZ_ADC_AUX_VREF_BITS 12
+#define JZ_ADC_BATTERY_LOW_VREF 2500
+#define JZ_ADC_BATTERY_LOW_VREF_BITS 12
+#define JZ4725B_ADC_BATTERY_HIGH_VREF 7500
+#define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS 10
+#define JZ4740_ADC_BATTERY_HIGH_VREF (7500 * 0.986)
+#define JZ4740_ADC_BATTERY_HIGH_VREF_BITS 12
+
+struct ingenic_adc_soc_data {
+ unsigned int battery_high_vref;
+ unsigned int battery_high_vref_bits;
+ const int *battery_raw_avail;
+ size_t battery_raw_avail_size;
+ const int *battery_scale_avail;
+ size_t battery_scale_avail_size;
+};
+
+struct ingenic_adc {
+ void __iomem *base;
+ struct clk *clk;
+ struct mutex lock;
+ const struct ingenic_adc_soc_data *soc_data;
+ bool low_vref_mode;
+};
+
+static void ingenic_adc_set_config(struct ingenic_adc *adc,
+ uint32_t mask,
+ uint32_t val)
+{
+ uint32_t cfg;
+
+ clk_enable(adc->clk);
+ mutex_lock(&adc->lock);
+
+ cfg = readl(adc->base + JZ_ADC_REG_CFG) & ~mask;
+ cfg |= val;
+ writel(cfg, adc->base + JZ_ADC_REG_CFG);
+
+ mutex_unlock(&adc->lock);
+ clk_disable(adc->clk);
+}
+
+static void ingenic_adc_enable(struct ingenic_adc *adc,
+ int engine,
+ bool enabled)
+{
+ u8 val;
+
+ mutex_lock(&adc->lock);
+ val = readb(adc->base + JZ_ADC_REG_ENABLE);
+
+ if (enabled)
+ val |= BIT(engine);
+ else
+ val &= ~BIT(engine);
+
+ writeb(val, adc->base + JZ_ADC_REG_ENABLE);
+ mutex_unlock(&adc->lock);
+}
+
+static int ingenic_adc_capture(struct ingenic_adc *adc,
+ int engine)
+{
+ u8 val;
+ int ret;
+
+ ingenic_adc_enable(adc, engine, true);
+ ret = readb_poll_timeout(adc->base + JZ_ADC_REG_ENABLE, val,
+ !(val & BIT(engine)), 250, 1000);
+ if (ret)
+ ingenic_adc_enable(adc, engine, false);
+
+ return ret;
+}
+
+static int ingenic_adc_write_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long m)
+{
+ struct ingenic_adc *adc = iio_priv(iio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->channel) {
+ case INGENIC_ADC_BATTERY:
+ if (val > JZ_ADC_BATTERY_LOW_VREF) {
+ ingenic_adc_set_config(adc,
+ JZ_ADC_REG_CFG_BAT_MD,
+ 0);
+ adc->low_vref_mode = false;
+ } else {
+ ingenic_adc_set_config(adc,
+ JZ_ADC_REG_CFG_BAT_MD,
+ JZ_ADC_REG_CFG_BAT_MD);
+ adc->low_vref_mode = true;
+ }
+ return 0;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static const int jz4725b_adc_battery_raw_avail[] = {
+ 0, 1, (1 << JZ_ADC_BATTERY_LOW_VREF_BITS) - 1,
+};
+
+static const int jz4725b_adc_battery_scale_avail[] = {
+ JZ4725B_ADC_BATTERY_HIGH_VREF, JZ4725B_ADC_BATTERY_HIGH_VREF_BITS,
+ JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
+};
+
+static const int jz4740_adc_battery_raw_avail[] = {
+ 0, 1, (1 << JZ_ADC_BATTERY_LOW_VREF_BITS) - 1,
+};
+
+static const int jz4740_adc_battery_scale_avail[] = {
+ JZ4740_ADC_BATTERY_HIGH_VREF, JZ4740_ADC_BATTERY_HIGH_VREF_BITS,
+ JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS,
+};
+
+static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = {
+ .battery_high_vref = JZ4725B_ADC_BATTERY_HIGH_VREF,
+ .battery_high_vref_bits = JZ4725B_ADC_BATTERY_HIGH_VREF_BITS,
+ .battery_raw_avail = jz4725b_adc_battery_raw_avail,
+ .battery_raw_avail_size = ARRAY_SIZE(jz4725b_adc_battery_raw_avail),
+ .battery_scale_avail = jz4725b_adc_battery_scale_avail,
+ .battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail),
+};
+
+static const struct ingenic_adc_soc_data jz4740_adc_soc_data = {
+ .battery_high_vref = JZ4740_ADC_BATTERY_HIGH_VREF,
+ .battery_high_vref_bits = JZ4740_ADC_BATTERY_HIGH_VREF_BITS,
+ .battery_raw_avail = jz4740_adc_battery_raw_avail,
+ .battery_raw_avail_size = ARRAY_SIZE(jz4740_adc_battery_raw_avail),
+ .battery_scale_avail = jz4740_adc_battery_scale_avail,
+ .battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail),
+};
+
+static int ingenic_adc_read_avail(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals,
+ int *type,
+ int *length,
+ long m)
+{
+ struct ingenic_adc *adc = iio_priv(iio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ *type = IIO_VAL_INT;
+ *length = adc->soc_data->battery_raw_avail_size;
+ *vals = adc->soc_data->battery_raw_avail;
+ return IIO_AVAIL_RANGE;
+ case IIO_CHAN_INFO_SCALE:
+ *type = IIO_VAL_FRACTIONAL_LOG2;
+ *length = adc->soc_data->battery_scale_avail_size;
+ *vals = adc->soc_data->battery_scale_avail;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ };
+}
+
+static int ingenic_adc_read_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ struct ingenic_adc *adc = iio_priv(iio_dev);
+ int ret;
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ clk_enable(adc->clk);
+ ret = ingenic_adc_capture(adc, chan->channel);
+ if (ret) {
+ clk_disable(adc->clk);
+ return ret;
+ }
+
+ switch (chan->channel) {
+ case INGENIC_ADC_AUX:
+ *val = readw(adc->base + JZ_ADC_REG_ADSDAT);
+ break;
+ case INGENIC_ADC_BATTERY:
+ *val = readw(adc->base + JZ_ADC_REG_ADBDAT);
+ break;
+ }
+
+ clk_disable(adc->clk);
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->channel) {
+ case INGENIC_ADC_AUX:
+ *val = JZ_ADC_AUX_VREF;
+ *val2 = JZ_ADC_AUX_VREF_BITS;
+ break;
+ case INGENIC_ADC_BATTERY:
+ if (adc->low_vref_mode) {
+ *val = JZ_ADC_BATTERY_LOW_VREF;
+ *val2 = JZ_ADC_BATTERY_LOW_VREF_BITS;
+ } else {
+ *val = adc->soc_data->battery_high_vref;
+ *val2 = adc->soc_data->battery_high_vref_bits;
+ }
+ break;
+ }
+
+ return IIO_VAL_FRACTIONAL_LOG2;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void ingenic_adc_clk_cleanup(void *data)
+{
+ clk_unprepare(data);
+}
+
+static const struct iio_info ingenic_adc_info = {
+ .write_raw = ingenic_adc_write_raw,
+ .read_raw = ingenic_adc_read_raw,
+ .read_avail = ingenic_adc_read_avail,
+};
+
+static const struct iio_chan_spec ingenic_channels[] = {
+ {
+ .extend_name = "aux",
+ .type = IIO_VOLTAGE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .indexed = 1,
+ .channel = INGENIC_ADC_AUX,
+ },
+ {
+ .extend_name = "battery",
+ .type = IIO_VOLTAGE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .indexed = 1,
+ .channel = INGENIC_ADC_BATTERY,
+ },
+};
+
+static int ingenic_adc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct iio_dev *iio_dev;
+ struct ingenic_adc *adc;
+ struct resource *mem_base;
+ const struct ingenic_adc_soc_data *soc_data;
+ int ret;
+
+ soc_data = device_get_match_data(dev);
+ if (!soc_data)
+ return -EINVAL;
+
+ iio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
+ if (!iio_dev)
+ return -ENOMEM;
+
+ adc = iio_priv(iio_dev);
+ mutex_init(&adc->lock);
+ adc->soc_data = soc_data;
+
+ mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ adc->base = devm_ioremap_resource(dev, mem_base);
+ if (IS_ERR(adc->base)) {
+ dev_err(dev, "Unable to ioremap mmio resource\n");
+ return PTR_ERR(adc->base);
+ }
+
+ adc->clk = devm_clk_get(dev, "adc");
+ if (IS_ERR(adc->clk)) {
+ dev_err(dev, "Unable to get clock\n");
+ return PTR_ERR(adc->clk);
+ }
+
+ ret = clk_prepare_enable(adc->clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ /* Put hardware in a known passive state. */
+ writeb(0x00, adc->base + JZ_ADC_REG_ENABLE);
+ writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
+ clk_disable(adc->clk);
+
+ ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk);
+ if (ret) {
+ dev_err(dev, "Unable to add action\n");
+ return ret;
+ }
+
+ iio_dev->dev.parent = dev;
+ iio_dev->name = "jz-adc";
+ iio_dev->modes = INDIO_DIRECT_MODE;
+ iio_dev->channels = ingenic_channels;
+ iio_dev->num_channels = ARRAY_SIZE(ingenic_channels);
+ iio_dev->info = &ingenic_adc_info;
+
+ ret = devm_iio_device_register(dev, iio_dev);
+ if (ret)
+ dev_err(dev, "Unable to register IIO device\n");
+
+ return ret;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ingenic_adc_of_match[] = {
+ { .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, },
+ { .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ingenic_adc_of_match);
+#endif
+
+static struct platform_driver ingenic_adc_driver = {
+ .driver = {
+ .name = "ingenic-adc",
+ .of_match_table = of_match_ptr(ingenic_adc_of_match),
+ },
+ .probe = ingenic_adc_probe,
+};
+module_platform_driver(ingenic_adc_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/lpc32xx_adc.c b/drivers/iio/adc/lpc32xx_adc.c
index 20b36690fa4f..e361c1532a75 100644
--- a/drivers/iio/adc/lpc32xx_adc.c
+++ b/drivers/iio/adc/lpc32xx_adc.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* lpc32xx_adc.c - Support for ADC in LPC32XX
*
* 3-channel, 10-bit ADC
*
* Copyright (C) 2011, 2012 Roland Stigge <stigge@antcom.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 729becb2d3d9..f8600fbcdfe3 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
+#include <linux/mfd/syscon.h>
#define MESON_SAR_ADC_REG0 0x00
#define MESON_SAR_ADC_REG0_PANEL_DETECT BIT(31)
@@ -174,6 +175,9 @@
#define MESON_SAR_ADC_EFUSE_BYTE3_UPPER_ADC_VAL GENMASK(6, 0)
#define MESON_SAR_ADC_EFUSE_BYTE3_IS_CALIBRATED BIT(7)
+#define MESON_HHI_DPLL_TOP_0 0x318
+#define MESON_HHI_DPLL_TOP_0_TSC_BIT4 BIT(9)
+
/* for use with IIO_VAL_INT_PLUS_MICRO */
#define MILLION 1000000
@@ -280,6 +284,7 @@ struct meson_sar_adc_priv {
struct completion done;
int calibbias;
int calibscale;
+ struct regmap *tsc_regmap;
bool temperature_sensor_calibrated;
u8 temperature_sensor_coefficient;
u16 temperature_sensor_adc_val;
@@ -727,6 +732,15 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
return ret;
}
+ priv->tsc_regmap =
+ syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
+ "amlogic,hhi-sysctrl");
+ if (IS_ERR(priv->tsc_regmap)) {
+ dev_err(indio_dev->dev.parent,
+ "failed to get amlogic,hhi-sysctrl regmap\n");
+ return PTR_ERR(priv->tsc_regmap);
+ }
+
read_len = MESON_SAR_ADC_EFUSE_BYTES;
buf = nvmem_cell_read(temperature_calib, &read_len);
if (IS_ERR(buf)) {
@@ -861,6 +875,22 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
priv->temperature_sensor_coefficient);
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
MESON_SAR_ADC_DELTA_10_TS_C_MASK, regval);
+
+ if (priv->param->temperature_trimming_bits == 5) {
+ if (priv->temperature_sensor_coefficient & BIT(4))
+ regval = MESON_HHI_DPLL_TOP_0_TSC_BIT4;
+ else
+ regval = 0;
+
+ /*
+ * bit [4] (the 5th bit when starting to count at 1)
+ * of the TSC is located in the HHI register area.
+ */
+ regmap_update_bits(priv->tsc_regmap,
+ MESON_HHI_DPLL_TOP_0,
+ MESON_HHI_DPLL_TOP_0_TSC_BIT4,
+ regval);
+ }
} else {
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
MESON_SAR_ADC_DELTA_10_TS_REVE1, 0);
@@ -1064,6 +1094,9 @@ static const struct meson_sar_adc_param meson_sar_adc_meson8b_param = {
.bandgap_reg = MESON_SAR_ADC_DELTA_10,
.regmap_config = &meson_sar_adc_regmap_config_meson8,
.resolution = 10,
+ .temperature_trimming_bits = 5,
+ .temperature_multiplier = 10,
+ .temperature_divider = 32,
};
static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
new file mode 100644
index 000000000000..9e25bbec9c70
--- /dev/null
+++ b/drivers/iio/adc/npcm_adc.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Nuvoton Technology corporation.
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+struct npcm_adc {
+ bool int_status;
+ u32 adc_sample_hz;
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *adc_clk;
+ wait_queue_head_t wq;
+ struct regulator *vref;
+ struct regmap *rst_regmap;
+};
+
+/* NPCM7xx reset module */
+#define NPCM7XX_IPSRST1_OFFSET 0x020
+#define NPCM7XX_IPSRST1_ADC_RST BIT(27)
+
+/* ADC registers */
+#define NPCM_ADCCON 0x00
+#define NPCM_ADCDATA 0x04
+
+/* ADCCON Register Bits */
+#define NPCM_ADCCON_ADC_INT_EN BIT(21)
+#define NPCM_ADCCON_REFSEL BIT(19)
+#define NPCM_ADCCON_ADC_INT_ST BIT(18)
+#define NPCM_ADCCON_ADC_EN BIT(17)
+#define NPCM_ADCCON_ADC_RST BIT(16)
+#define NPCM_ADCCON_ADC_CONV BIT(13)
+
+#define NPCM_ADCCON_CH_MASK GENMASK(27, 24)
+#define NPCM_ADCCON_CH(x) ((x) << 24)
+#define NPCM_ADCCON_DIV_SHIFT 1
+#define NPCM_ADCCON_DIV_MASK GENMASK(8, 1)
+#define NPCM_ADC_DATA_MASK(x) ((x) & GENMASK(9, 0))
+
+#define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
+
+/* ADC General Definition */
+#define NPCM_RESOLUTION_BITS 10
+#define NPCM_INT_VREF_MV 2000
+
+#define NPCM_ADC_CHAN(ch) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = ch, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+}
+
+static const struct iio_chan_spec npcm_adc_iio_channels[] = {
+ NPCM_ADC_CHAN(0),
+ NPCM_ADC_CHAN(1),
+ NPCM_ADC_CHAN(2),
+ NPCM_ADC_CHAN(3),
+ NPCM_ADC_CHAN(4),
+ NPCM_ADC_CHAN(5),
+ NPCM_ADC_CHAN(6),
+ NPCM_ADC_CHAN(7),
+};
+
+static irqreturn_t npcm_adc_isr(int irq, void *data)
+{
+ u32 regtemp;
+ struct iio_dev *indio_dev = data;
+ struct npcm_adc *info = iio_priv(indio_dev);
+
+ regtemp = ioread32(info->regs + NPCM_ADCCON);
+ if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
+ iowrite32(regtemp, info->regs + NPCM_ADCCON);
+ wake_up_interruptible(&info->wq);
+ info->int_status = true;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
+{
+ int ret;
+ u32 regtemp;
+
+ /* Select ADC channel */
+ regtemp = ioread32(info->regs + NPCM_ADCCON);
+ regtemp &= ~NPCM_ADCCON_CH_MASK;
+ info->int_status = false;
+ iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
+ NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
+
+ ret = wait_event_interruptible_timeout(info->wq, info->int_status,
+ msecs_to_jiffies(10));
+ if (ret == 0) {
+ regtemp = ioread32(info->regs + NPCM_ADCCON);
+ if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
+ /* if conversion failed - reset ADC module */
+ regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
+ NPCM7XX_IPSRST1_ADC_RST);
+ msleep(100);
+ regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
+ 0x0);
+ msleep(100);
+
+ /* Enable ADC and start conversion module */
+ iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV,
+ info->regs + NPCM_ADCCON);
+ dev_err(info->dev, "RESET ADC Complete\n");
+ }
+ return -ETIMEDOUT;
+ }
+ if (ret < 0)
+ return ret;
+
+ *val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
+
+ return 0;
+}
+
+static int npcm_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ int vref_uv;
+ struct npcm_adc *info = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ ret = npcm_adc_read(info, val, chan->channel);
+ mutex_unlock(&indio_dev->mlock);
+ if (ret) {
+ dev_err(info->dev, "NPCM ADC read failed\n");
+ return ret;
+ }
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ if (info->vref) {
+ vref_uv = regulator_get_voltage(info->vref);
+ *val = vref_uv / 1000;
+ } else {
+ *val = NPCM_INT_VREF_MV;
+ }
+ *val2 = NPCM_RESOLUTION_BITS;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = info->adc_sample_hz;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct iio_info npcm_adc_iio_info = {
+ .read_raw = &npcm_adc_read_raw,
+};
+
+static const struct of_device_id npcm_adc_match[] = {
+ { .compatible = "nuvoton,npcm750-adc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, npcm_adc_match);
+
+static int npcm_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ int irq;
+ u32 div;
+ u32 reg_con;
+ struct resource *res;
+ struct npcm_adc *info;
+ struct iio_dev *indio_dev;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev)
+ return -ENOMEM;
+ info = iio_priv(indio_dev);
+
+ info->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(info->regs))
+ return PTR_ERR(info->regs);
+
+ info->adc_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(info->adc_clk)) {
+ dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
+ return PTR_ERR(info->adc_clk);
+ }
+
+ /* calculate ADC clock sample rate */
+ reg_con = ioread32(info->regs + NPCM_ADCCON);
+ div = reg_con & NPCM_ADCCON_DIV_MASK;
+ div = div >> NPCM_ADCCON_DIV_SHIFT;
+ info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
+
+ if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
+ info->rst_regmap = syscon_regmap_lookup_by_compatible
+ ("nuvoton,npcm750-rst");
+ if (IS_ERR(info->rst_regmap)) {
+ dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n");
+ ret = PTR_ERR(info->rst_regmap);
+ goto err_disable_clk;
+ }
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "failed getting interrupt resource\n");
+ ret = -EINVAL;
+ goto err_disable_clk;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
+ "NPCM_ADC", indio_dev);
+ if (ret < 0) {
+ dev_err(dev, "failed requesting interrupt\n");
+ goto err_disable_clk;
+ }
+
+ reg_con = ioread32(info->regs + NPCM_ADCCON);
+ info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
+ if (!IS_ERR(info->vref)) {
+ ret = regulator_enable(info->vref);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
+ goto err_disable_clk;
+ }
+
+ iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
+ info->regs + NPCM_ADCCON);
+ } else {
+ /*
+ * Any error which is not ENODEV indicates the regulator
+ * has been specified and so is a failure case.
+ */
+ if (PTR_ERR(info->vref) != -ENODEV) {
+ ret = PTR_ERR(info->vref);
+ goto err_disable_clk;
+ }
+
+ /* Use internal reference */
+ iowrite32(reg_con | NPCM_ADCCON_REFSEL,
+ info->regs + NPCM_ADCCON);
+ }
+
+ init_waitqueue_head(&info->wq);
+
+ reg_con = ioread32(info->regs + NPCM_ADCCON);
+ reg_con |= NPCM_ADC_ENABLE;
+
+ /* Enable the ADC Module */
+ iowrite32(reg_con, info->regs + NPCM_ADCCON);
+
+ /* Start ADC conversion */
+ iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
+
+ platform_set_drvdata(pdev, indio_dev);
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->info = &npcm_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = npcm_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't register the device.\n");
+ goto err_iio_register;
+ }
+
+ pr_info("NPCM ADC driver probed\n");
+
+ return 0;
+
+err_iio_register:
+ iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
+ if (!IS_ERR(info->vref))
+ regulator_disable(info->vref);
+err_disable_clk:
+ clk_disable_unprepare(info->adc_clk);
+
+ return ret;
+}
+
+static int npcm_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct npcm_adc *info = iio_priv(indio_dev);
+ u32 regtemp;
+
+ iio_device_unregister(indio_dev);
+
+ regtemp = ioread32(info->regs + NPCM_ADCCON);
+ iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
+ if (!IS_ERR(info->vref))
+ regulator_disable(info->vref);
+ clk_disable_unprepare(info->adc_clk);
+
+ return 0;
+}
+
+static struct platform_driver npcm_adc_driver = {
+ .probe = npcm_adc_probe,
+ .remove = npcm_adc_remove,
+ .driver = {
+ .name = "npcm_adc",
+ .of_match_table = npcm_adc_match,
+ },
+};
+
+module_platform_driver(npcm_adc_driver);
+
+MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
+MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index c30c002f1fef..4735f8a1ca9d 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -423,18 +423,14 @@ static irqreturn_t pm8xxx_eoc_irq(int irq, void *d)
static struct pm8xxx_chan_info *
pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan)
{
- struct pm8xxx_chan_info *ch;
int i;
for (i = 0; i < adc->nchans; i++) {
- ch = &adc->chans[i];
+ struct pm8xxx_chan_info *ch = &adc->chans[i];
if (ch->hwchan->amux_channel == chan)
- break;
+ return ch;
}
- if (i == adc->nchans)
- return NULL;
-
- return ch;
+ return NULL;
}
static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc,
diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c
new file mode 100644
index 000000000000..53f17e4f2f23
--- /dev/null
+++ b/drivers/iio/adc/ti-ads124s08.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+/* TI ADS124S0X chip family driver
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/sysfs.h>
+
+/* Commands */
+#define ADS124S08_CMD_NOP 0x00
+#define ADS124S08_CMD_WAKEUP 0x02
+#define ADS124S08_CMD_PWRDWN 0x04
+#define ADS124S08_CMD_RESET 0x06
+#define ADS124S08_CMD_START 0x08
+#define ADS124S08_CMD_STOP 0x0a
+#define ADS124S08_CMD_SYOCAL 0x16
+#define ADS124S08_CMD_SYGCAL 0x17
+#define ADS124S08_CMD_SFOCAL 0x19
+#define ADS124S08_CMD_RDATA 0x12
+#define ADS124S08_CMD_RREG 0x20
+#define ADS124S08_CMD_WREG 0x40
+
+/* Registers */
+#define ADS124S08_ID_REG 0x00
+#define ADS124S08_STATUS 0x01
+#define ADS124S08_INPUT_MUX 0x02
+#define ADS124S08_PGA 0x03
+#define ADS124S08_DATA_RATE 0x04
+#define ADS124S08_REF 0x05
+#define ADS124S08_IDACMAG 0x06
+#define ADS124S08_IDACMUX 0x07
+#define ADS124S08_VBIAS 0x08
+#define ADS124S08_SYS 0x09
+#define ADS124S08_OFCAL0 0x0a
+#define ADS124S08_OFCAL1 0x0b
+#define ADS124S08_OFCAL2 0x0c
+#define ADS124S08_FSCAL0 0x0d
+#define ADS124S08_FSCAL1 0x0e
+#define ADS124S08_FSCAL2 0x0f
+#define ADS124S08_GPIODAT 0x10
+#define ADS124S08_GPIOCON 0x11
+
+/* ADS124S0x common channels */
+#define ADS124S08_AIN0 0x00
+#define ADS124S08_AIN1 0x01
+#define ADS124S08_AIN2 0x02
+#define ADS124S08_AIN3 0x03
+#define ADS124S08_AIN4 0x04
+#define ADS124S08_AIN5 0x05
+#define ADS124S08_AINCOM 0x0c
+/* ADS124S08 only channels */
+#define ADS124S08_AIN6 0x06
+#define ADS124S08_AIN7 0x07
+#define ADS124S08_AIN8 0x08
+#define ADS124S08_AIN9 0x09
+#define ADS124S08_AIN10 0x0a
+#define ADS124S08_AIN11 0x0b
+#define ADS124S08_MAX_CHANNELS 12
+
+#define ADS124S08_POS_MUX_SHIFT 0x04
+#define ADS124S08_INT_REF 0x09
+
+#define ADS124S08_START_REG_MASK 0x1f
+#define ADS124S08_NUM_BYTES_MASK 0x1f
+
+#define ADS124S08_START_CONV 0x01
+#define ADS124S08_STOP_CONV 0x00
+
+enum ads124s_id {
+ ADS124S08_ID,
+ ADS124S06_ID,
+};
+
+struct ads124s_chip_info {
+ const struct iio_chan_spec *channels;
+ unsigned int num_channels;
+};
+
+struct ads124s_private {
+ const struct ads124s_chip_info *chip_info;
+ struct gpio_desc *reset_gpio;
+ struct spi_device *spi;
+ struct mutex lock;
+ u8 data[5] ____cacheline_aligned;
+};
+
+#define ADS124S08_CHAN(index) \
+{ \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = index, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .scan_index = index, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 32, \
+ .storagebits = 32, \
+ }, \
+}
+
+static const struct iio_chan_spec ads124s06_channels[] = {
+ ADS124S08_CHAN(0),
+ ADS124S08_CHAN(1),
+ ADS124S08_CHAN(2),
+ ADS124S08_CHAN(3),
+ ADS124S08_CHAN(4),
+ ADS124S08_CHAN(5),
+};
+
+static const struct iio_chan_spec ads124s08_channels[] = {
+ ADS124S08_CHAN(0),
+ ADS124S08_CHAN(1),
+ ADS124S08_CHAN(2),
+ ADS124S08_CHAN(3),
+ ADS124S08_CHAN(4),
+ ADS124S08_CHAN(5),
+ ADS124S08_CHAN(6),
+ ADS124S08_CHAN(7),
+ ADS124S08_CHAN(8),
+ ADS124S08_CHAN(9),
+ ADS124S08_CHAN(10),
+ ADS124S08_CHAN(11),
+};
+
+static const struct ads124s_chip_info ads124s_chip_info_tbl[] = {
+ [ADS124S08_ID] = {
+ .channels = ads124s08_channels,
+ .num_channels = ARRAY_SIZE(ads124s08_channels),
+ },
+ [ADS124S06_ID] = {
+ .channels = ads124s06_channels,
+ .num_channels = ARRAY_SIZE(ads124s06_channels),
+ },
+};
+
+static int ads124s_write_cmd(struct iio_dev *indio_dev, u8 command)
+{
+ struct ads124s_private *priv = iio_priv(indio_dev);
+
+ priv->data[0] = command;
+
+ return spi_write(priv->spi, &priv->data[0], 1);
+}
+
+static int ads124s_write_reg(struct iio_dev *indio_dev, u8 reg, u8 data)
+{
+ struct ads124s_private *priv = iio_priv(indio_dev);
+
+ priv->data[0] = ADS124S08_CMD_WREG | reg;
+ priv->data[1] = 0x0;
+ priv->data[2] = data;
+
+ return spi_write(priv->spi, &priv->data[0], 3);
+}
+
+static int ads124s_reset(struct iio_dev *indio_dev)
+{
+ struct ads124s_private *priv = iio_priv(indio_dev);
+
+ if (priv->reset_gpio) {
+ gpiod_set_value(priv->reset_gpio, 0);
+ udelay(200);
+ gpiod_set_value(priv->reset_gpio, 1);
+ } else {
+ return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET);
+ }
+
+ return 0;
+};
+
+static int ads124s_read(struct iio_dev *indio_dev, unsigned int chan)
+{
+ struct ads124s_private *priv = iio_priv(indio_dev);
+ int ret;
+ u32 tmp;
+ struct spi_transfer t[] = {
+ {
+ .tx_buf = &priv->data[0],
+ .len = 4,
+ .cs_change = 1,
+ }, {
+ .tx_buf = &priv->data[1],
+ .rx_buf = &priv->data[1],
+ .len = 4,
+ },
+ };
+
+ priv->data[0] = ADS124S08_CMD_RDATA;
+ memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data));
+
+ ret = spi_sync_transfer(priv->spi, t, ARRAY_SIZE(t));
+ if (ret < 0)
+ return ret;
+
+ tmp = priv->data[2] << 16 | priv->data[3] << 8 | priv->data[4];
+
+ return tmp;
+}
+
+static int ads124s_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long m)
+{
+ struct ads124s_private *priv = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&priv->lock);
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX,
+ chan->channel);
+ if (ret) {
+ dev_err(&priv->spi->dev, "Set ADC CH failed\n");
+ goto out;
+ }
+
+ ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV);
+ if (ret) {
+ dev_err(&priv->spi->dev, "Start conversions failed\n");
+ goto out;
+ }
+
+ ret = ads124s_read(indio_dev, chan->channel);
+ if (ret < 0) {
+ dev_err(&priv->spi->dev, "Read ADC failed\n");
+ goto out;
+ }
+
+ *val = ret;
+
+ ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
+ if (ret) {
+ dev_err(&priv->spi->dev, "Stop conversions failed\n");
+ goto out;
+ }
+
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static const struct iio_info ads124s_info = {
+ .read_raw = &ads124s_read_raw,
+};
+
+static irqreturn_t ads124s_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ads124s_private *priv = iio_priv(indio_dev);
+ u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
+ int scan_index, j = 0;
+ int ret;
+
+ for_each_set_bit(scan_index, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX,
+ scan_index);
+ if (ret)
+ dev_err(&priv->spi->dev, "Set ADC CH failed\n");
+
+ ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV);
+ if (ret)
+ dev_err(&priv->spi->dev, "Start ADC conversions failed\n");
+
+ buffer[j] = ads124s_read(indio_dev, scan_index);
+ ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
+ if (ret)
+ dev_err(&priv->spi->dev, "Stop ADC conversions failed\n");
+
+ j++;
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+ pf->timestamp);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int ads124s_probe(struct spi_device *spi)
+{
+ struct ads124s_private *ads124s_priv;
+ struct iio_dev *indio_dev;
+ const struct spi_device_id *spi_id = spi_get_device_id(spi);
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ads124s_priv));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ ads124s_priv = iio_priv(indio_dev);
+
+ ads124s_priv->reset_gpio = devm_gpiod_get_optional(&spi->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ads124s_priv->reset_gpio))
+ dev_info(&spi->dev, "Reset GPIO not defined\n");
+
+ ads124s_priv->chip_info = &ads124s_chip_info_tbl[spi_id->driver_data];
+
+ spi_set_drvdata(spi, indio_dev);
+
+ ads124s_priv->spi = spi;
+
+ indio_dev->name = spi_id->name;
+ indio_dev->dev.parent = &spi->dev;
+ indio_dev->dev.of_node = spi->dev.of_node;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ads124s_priv->chip_info->channels;
+ indio_dev->num_channels = ads124s_priv->chip_info->num_channels;
+ indio_dev->info = &ads124s_info;
+
+ mutex_init(&ads124s_priv->lock);
+
+ ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
+ ads124s_trigger_handler, NULL);
+ if (ret) {
+ dev_err(&spi->dev, "iio triggered buffer setup failed\n");
+ return ret;
+ }
+
+ ads124s_reset(indio_dev);
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ads124s_id[] = {
+ { "ads124s06", ADS124S06_ID },
+ { "ads124s08", ADS124S08_ID },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, ads124s_id);
+
+static const struct of_device_id ads124s_of_table[] = {
+ { .compatible = "ti,ads124s06" },
+ { .compatible = "ti,ads124s08" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ads124s_of_table);
+
+static struct spi_driver ads124s_driver = {
+ .driver = {
+ .name = "ads124s08",
+ .of_match_table = ads124s_of_table,
+ },
+ .probe = ads124s_probe,
+ .id_table = ads124s_id,
+};
+module_spi_driver(ads124s_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmuprhy@ti.com>");
+MODULE_DESCRIPTION("TI TI_ADS12S0X ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
index 184d686ebd99..8b4568edd5cb 100644
--- a/drivers/iio/adc/ti-ads8688.c
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -41,6 +41,7 @@
#define ADS8688_VREF_MV 4096
#define ADS8688_REALBITS 16
+#define ADS8688_MAX_CHANNELS 8
/*
* enum ads8688_range - ADS8688 reference voltage range
@@ -385,7 +386,7 @@ static irqreturn_t ads8688_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
- u16 buffer[8];
+ u16 buffer[ADS8688_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
int i, j = 0;
for (i = 0; i < indio_dev->masklength; i++) {
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index cafb1dcadc48..9d984f2a8ba7 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -142,7 +142,10 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
stepconfig |= STEPCONFIG_MODE_SWCNT;
tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
- stepconfig | STEPCONFIG_INP(chan));
+ stepconfig | STEPCONFIG_INP(chan) |
+ STEPCONFIG_INM_ADCREFM |
+ STEPCONFIG_RFP_VREFP |
+ STEPCONFIG_RFM_VREFN);
if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) {
dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 3f6be5ac049a..b13c61539d46 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1273,8 +1273,10 @@ static int xadc_probe(struct platform_device *pdev)
xadc->threshold[i] = 0xffff;
else
xadc->threshold[i] = 0;
- xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
+ ret = xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i),
xadc->threshold[i]);
+ if (ret)
+ goto err_free_irq;
}
/* Go to non-buffered mode */
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.