diff options
Diffstat (limited to 'drivers/iio')
57 files changed, 6301 insertions, 122 deletions
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c index 780f87f72338..f03ed00685ea 100644 --- a/drivers/iio/accel/adxl345_core.c +++ b/drivers/iio/accel/adxl345_core.c @@ -150,8 +150,8 @@ static int adxl345_read_raw(struct iio_dev *indio_dev, } static int adxl345_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, int val2, long mask) + struct iio_chan_spec const *chan, + int val, int val2, long mask) { struct adxl345_data *data = iio_priv(indio_dev); s64 n; diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index 421a0a8a1379..302781126bc6 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -31,6 +31,7 @@ #include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> #define MMA8452_STATUS 0x00 #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0)) @@ -107,6 +108,8 @@ struct mma8452_data { u8 data_cfg; const struct mma_chip_info *chip_info; int sleep_val; + struct regulator *vdd_reg; + struct regulator *vddio_reg; }; /** @@ -1534,9 +1537,39 @@ static int mma8452_probe(struct i2c_client *client, mutex_init(&data->lock); data->chip_info = match->data; + data->vdd_reg = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(data->vdd_reg)) { + if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_err(&client->dev, "failed to get VDD regulator!\n"); + return PTR_ERR(data->vdd_reg); + } + + data->vddio_reg = devm_regulator_get(&client->dev, "vddio"); + if (IS_ERR(data->vddio_reg)) { + if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_err(&client->dev, "failed to get VDDIO regulator!\n"); + return PTR_ERR(data->vddio_reg); + } + + ret = regulator_enable(data->vdd_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VDD regulator!\n"); + return ret; + } + + ret = regulator_enable(data->vddio_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VDDIO regulator!\n"); + goto disable_regulator_vdd; + } + ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I); if (ret < 0) - return ret; + goto disable_regulators; switch (ret) { case MMA8451_DEVICE_ID: @@ -1549,7 +1582,8 @@ static int mma8452_probe(struct i2c_client *client, break; /* else: fall through */ default: - return -ENODEV; + ret = -ENODEV; + goto disable_regulators; } dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n", @@ -1566,13 +1600,13 @@ static int mma8452_probe(struct i2c_client *client, ret = mma8452_reset(client); if (ret < 0) - return ret; + goto disable_regulators; data->data_cfg = MMA8452_DATA_CFG_FS_2G; ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG, data->data_cfg); if (ret < 0) - return ret; + goto disable_regulators; /* * By default set transient threshold to max to avoid events if @@ -1581,7 +1615,7 @@ static int mma8452_probe(struct i2c_client *client, ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS, MMA8452_TRANSIENT_THS_MASK); if (ret < 0) - return ret; + goto disable_regulators; if (client->irq) { int irq2; @@ -1595,7 +1629,7 @@ static int mma8452_probe(struct i2c_client *client, MMA8452_CTRL_REG5, data->chip_info->all_events); if (ret < 0) - return ret; + goto disable_regulators; dev_dbg(&client->dev, "using interrupt line INT1\n"); } @@ -1604,11 +1638,11 @@ static int mma8452_probe(struct i2c_client *client, MMA8452_CTRL_REG4, data->chip_info->enabled_events); if (ret < 0) - return ret; + goto disable_regulators; ret = mma8452_trigger_setup(indio_dev); if (ret < 0) - return ret; + goto disable_regulators; } data->ctrl_reg1 = MMA8452_CTRL_ACTIVE | @@ -1661,12 +1695,19 @@ buffer_cleanup: trigger_cleanup: mma8452_trigger_cleanup(indio_dev); +disable_regulators: + regulator_disable(data->vddio_reg); + +disable_regulator_vdd: + regulator_disable(data->vdd_reg); + return ret; } static int mma8452_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct mma8452_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); @@ -1678,6 +1719,9 @@ static int mma8452_remove(struct i2c_client *client) mma8452_trigger_cleanup(indio_dev); mma8452_standby(iio_priv(indio_dev)); + regulator_disable(data->vddio_reg); + regulator_disable(data->vdd_reg); + return 0; } @@ -1696,6 +1740,18 @@ static int mma8452_runtime_suspend(struct device *dev) return -EAGAIN; } + ret = regulator_disable(data->vddio_reg); + if (ret) { + dev_err(dev, "failed to disable VDDIO regulator\n"); + return ret; + } + + ret = regulator_disable(data->vdd_reg); + if (ret) { + dev_err(dev, "failed to disable VDD regulator\n"); + return ret; + } + return 0; } @@ -1705,9 +1761,22 @@ static int mma8452_runtime_resume(struct device *dev) struct mma8452_data *data = iio_priv(indio_dev); int ret, sleep_val; + ret = regulator_enable(data->vdd_reg); + if (ret) { + dev_err(dev, "failed to enable VDD regulator\n"); + return ret; + } + + ret = regulator_enable(data->vddio_reg); + if (ret) { + dev_err(dev, "failed to enable VDDIO regulator\n"); + regulator_disable(data->vdd_reg); + return ret; + } + ret = mma8452_active(data); if (ret < 0) - return ret; + goto runtime_resume_failed; ret = mma8452_get_odr_index(data); sleep_val = 1000 / mma8452_samp_freq[ret][0]; @@ -1717,25 +1786,17 @@ static int mma8452_runtime_resume(struct device *dev) msleep_interruptible(sleep_val); return 0; -} -#endif -#ifdef CONFIG_PM_SLEEP -static int mma8452_suspend(struct device *dev) -{ - return mma8452_standby(iio_priv(i2c_get_clientdata( - to_i2c_client(dev)))); -} +runtime_resume_failed: + regulator_disable(data->vddio_reg); + regulator_disable(data->vdd_reg); -static int mma8452_resume(struct device *dev) -{ - return mma8452_active(iio_priv(i2c_get_clientdata( - to_i2c_client(dev)))); + return ret; } #endif static const struct dev_pm_ops mma8452_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(mma8452_suspend, mma8452_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) SET_RUNTIME_PM_OPS(mma8452_runtime_suspend, mma8452_runtime_resume, NULL) }; diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index f7b471121508..a3c0916479fa 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> +#include <linux/acpi.h> #include <linux/errno.h> #include <linux/types.h> #include <linux/mutex.h> @@ -918,12 +919,167 @@ static const struct iio_trigger_ops st_accel_trigger_ops = { #define ST_ACCEL_TRIGGER_OPS NULL #endif +static const struct iio_mount_matrix * +get_mount_matrix(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct st_sensor_data *adata = iio_priv(indio_dev); + + return adata->mount_matrix; +} + +static const struct iio_chan_spec_ext_info mount_matrix_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, get_mount_matrix), + { }, +}; + +/* Read ST-specific _ONT orientation data from ACPI and generate an + * appropriate mount matrix. + */ +static int apply_acpi_orientation(struct iio_dev *indio_dev, + struct iio_chan_spec *channels) +{ +#ifdef CONFIG_ACPI + struct st_sensor_data *adata = iio_priv(indio_dev); + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_device *adev; + union acpi_object *ont; + union acpi_object *elements; + acpi_status status; + int ret = -EINVAL; + unsigned int val; + int i, j; + int final_ont[3][3] = { { 0 }, }; + + /* For some reason, ST's _ONT translation does not apply directly + * to the data read from the sensor. Another translation must be + * performed first, as described by the matrix below. Perhaps + * ST required this specific translation for the first product + * where the device was mounted? + */ + const int default_ont[3][3] = { + { 0, 1, 0 }, + { -1, 0, 0 }, + { 0, 0, -1 }, + }; + + + adev = ACPI_COMPANION(adata->dev); + if (!adev) + return 0; + + /* Read _ONT data, which should be a package of 6 integers. */ + status = acpi_evaluate_object(adev->handle, "_ONT", NULL, &buffer); + if (status == AE_NOT_FOUND) { + return 0; + } else if (ACPI_FAILURE(status)) { + dev_warn(&indio_dev->dev, "failed to execute _ONT: %d\n", + status); + return status; + } + + ont = buffer.pointer; + if (ont->type != ACPI_TYPE_PACKAGE || ont->package.count != 6) + goto out; + + /* The first 3 integers provide axis order information. + * e.g. 0 1 2 would indicate normal X,Y,Z ordering. + * e.g. 1 0 2 indicates that data arrives in order Y,X,Z. + */ + elements = ont->package.elements; + for (i = 0; i < 3; i++) { + if (elements[i].type != ACPI_TYPE_INTEGER) + goto out; + + val = elements[i].integer.value; + if (val < 0 || val > 2) + goto out; + + /* Avoiding full matrix multiplication, we simply reorder the + * columns in the default_ont matrix according to the + * ordering provided by _ONT. + */ + final_ont[0][i] = default_ont[0][val]; + final_ont[1][i] = default_ont[1][val]; + final_ont[2][i] = default_ont[2][val]; + } + + /* The final 3 integers provide sign flip information. + * 0 means no change, 1 means flip. + * e.g. 0 0 1 means that Z data should be sign-flipped. + * This is applied after the axis reordering from above. + */ + elements += 3; + for (i = 0; i < 3; i++) { + if (elements[i].type != ACPI_TYPE_INTEGER) + goto out; + + val = elements[i].integer.value; + if (val != 0 && val != 1) + goto out; + if (!val) + continue; + + /* Flip the values in the indicated column */ + final_ont[0][i] *= -1; + final_ont[1][i] *= -1; + final_ont[2][i] *= -1; + } + + /* Convert our integer matrix to a string-based iio_mount_matrix */ + adata->mount_matrix = devm_kmalloc(&indio_dev->dev, + sizeof(*adata->mount_matrix), + GFP_KERNEL); + if (!adata->mount_matrix) { + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < 3; i++) { + for (j = 0; j < 3; j++) { + int matrix_val = final_ont[i][j]; + char *str_value; + + switch (matrix_val) { + case -1: + str_value = "-1"; + break; + case 0: + str_value = "0"; + break; + case 1: + str_value = "1"; + break; + default: + goto out; + } + adata->mount_matrix->rotation[i * 3 + j] = str_value; + } + } + + /* Expose the mount matrix via ext_info */ + for (i = 0; i < indio_dev->num_channels; i++) + channels[i].ext_info = mount_matrix_ext_info; + + ret = 0; + dev_info(&indio_dev->dev, "computed mount matrix from ACPI\n"); + +out: + kfree(buffer.pointer); + return ret; +#else /* !CONFIG_ACPI */ + return 0; +#endif +} + int st_accel_common_probe(struct iio_dev *indio_dev) { struct st_sensor_data *adata = iio_priv(indio_dev); struct st_sensors_platform_data *pdata = (struct st_sensors_platform_data *)adata->dev->platform_data; int irq = adata->get_irq_data_ready(indio_dev); + struct iio_chan_spec *channels; + size_t channels_size; int err; indio_dev->modes = INDIO_DIRECT_MODE; @@ -942,9 +1098,22 @@ int st_accel_common_probe(struct iio_dev *indio_dev) adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS; adata->multiread_bit = adata->sensor_settings->multi_read_bit; - indio_dev->channels = adata->sensor_settings->ch; indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS; + channels_size = indio_dev->num_channels * sizeof(struct iio_chan_spec); + channels = devm_kmemdup(&indio_dev->dev, + adata->sensor_settings->ch, + channels_size, GFP_KERNEL); + if (!channels) { + err = -ENOMEM; + goto st_accel_power_off; + } + + if (apply_acpi_orientation(indio_dev, channels)) + dev_warn(&indio_dev->dev, + "failed to apply ACPI orientation data: %d\n", err); + + indio_dev->channels = channels; adata->current_fullscale = (struct st_sensor_fullscale_avl *) &adata->sensor_settings->fs.fs_avl[0]; adata->odr = adata->sensor_settings->odr.odr_avl[0].hz; diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 7a3ca4ec0cb7..76db6e5cc296 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -57,18 +57,48 @@ config AD7298 module will be called ad7298. config AD7476 - tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" + tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD an TI" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, - AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, - AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). + Say yes here to build support for the following SPI analog to + digital converters (ADCs): + Analog Devices: AD7273, AD7274, AD7276, AD7277, AD7278, AD7475, + AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495, AD7910, + AD7920. + Texas Instruments: ADS7866, ADS7867, ADS7868. To compile this driver as a module, choose M here: the module will be called ad7476. +config AD7606 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config AD7606_IFACE_PARALLEL + tristate "Analog Devices AD7606 ADC driver with parallel interface support" + depends on HAS_IOMEM + select AD7606 + help + Say yes here to build parallel interface support for Analog Devices: + ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the + module will be called ad7606_parallel. + +config AD7606_IFACE_SPI + tristate "Analog Devices AD7606 ADC driver with spi interface support" + depends on SPI + select AD7606 + help + Say yes here to build spi interface support for Analog Devices: + ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the + module will be called ad7606_spi. + config AD7766 tristate "Analog Devices AD7766/AD7767 ADC driver" depends on SPI_MASTER @@ -81,6 +111,19 @@ config AD7766 To compile this driver as a module, choose M here: the module will be called ad7766. +config AD7768_1 + tristate "Analog Devices AD7768-1 ADC driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Analog Devices AD7768-1 SPI + simultaneously sampling sigma-delta analog to digital converter (ADC). + + To compile this driver as a module, choose M here: the module will be + called ad7768-1. + config AD7791 tristate "Analog Devices AD7791 ADC driver" depends on SPI @@ -367,6 +410,15 @@ config INA2XX_ADC Say yes here to build support for TI INA2xx family of Power Monitors. This driver is mutually exclusive with the HWMON version. +config INGENIC_ADC + tristate "Ingenic JZ47xx SoCs ADC driver" + depends on MIPS || COMPILE_TEST + help + Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit. + + This driver can also be built as a module. If so, the module will be + called ingenic_adc. + config IMX7D_ADC tristate "Freescale IMX7D ADC driver" depends on ARCH_MXC || COMPILE_TEST @@ -576,6 +628,16 @@ config NAU7802 To compile this driver as a module, choose M here: the module will be called nau7802. +config NPCM_ADC + tristate "Nuvoton NPCM ADC driver" + depends on ARCH_NPCM || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for Nuvoton NPCM ADC. + + This driver can also be built as a module. If so, the module + will be called npcm_adc. + config PALMAS_GPADC tristate "TI Palmas General Purpose ADC" depends on MFD_PALMAS @@ -755,6 +817,13 @@ config STM32_DFSDM_ADC This driver can also be built as a module. If so, the module will be called stm32-dfsdm-adc. +config STMPE_ADC + tristate "STMicroelectronics STMPE ADC driver" + depends on OF && MFD_STMPE + help + Say yes here to build support for ST Microelectronics STMPE + built-in ADC block (stmpe811). + config STX104 tristate "Apex Embedded Systems STX104 driver" depends on PC104 && X86 @@ -908,6 +977,16 @@ config TI_ADS8688 This driver can also be built as a module. If so, the module will be called ti-ads8688. +config TI_ADS124S08 + tristate "Texas Instruments ADS124S08" + depends on SPI && OF + help + If you say yes here you get support for Texas Instruments ADS124S08 + and ADS124S06 ADC chips + + This driver can also be built as a module. If so, the module will be + called ti-ads124s08. + config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC && HAS_DMA diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 07df37f621bd..6fcebd167524 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -11,7 +11,11 @@ obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7298) += ad7298.o obj-$(CONFIG_AD7923) += ad7923.o obj-$(CONFIG_AD7476) += ad7476.o +obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o +obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o +obj-$(CONFIG_AD7606) += ad7606.o obj-$(CONFIG_AD7766) += ad7766.o +obj-$(CONFIG_AD7768_1) += ad7768-1.o obj-$(CONFIG_AD7791) += ad7791.o obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o @@ -36,6 +40,7 @@ obj-$(CONFIG_HI8435) += hi8435.o obj-$(CONFIG_HX711) += hx711.o obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o +obj-$(CONFIG_INGENIC_ADC) += ingenic-adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o @@ -55,6 +60,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o obj-$(CONFIG_MESON_SARADC) += meson_saradc.o obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o obj-$(CONFIG_NAU7802) += nau7802.o +obj-$(CONFIG_NPCM_ADC) += npcm_adc.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o @@ -71,6 +77,7 @@ obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o +obj-$(CONFIG_STMPE_ADC) += stmpe-adc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o @@ -81,6 +88,7 @@ obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o +obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o obj-$(CONFIG_TI_TLC4541) += ti-tlc4541.o obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c index 0549686b9ef8..76747488044b 100644 --- a/drivers/iio/adc/ad7476.c +++ b/drivers/iio/adc/ad7476.c @@ -59,6 +59,9 @@ enum ad7476_supported_device_ids { ID_ADC081S, ID_ADC101S, ID_ADC121S, + ID_ADS7866, + ID_ADS7867, + ID_ADS7868, }; static irqreturn_t ad7476_trigger_handler(int irq, void *p) @@ -157,6 +160,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev, #define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \ BIT(IIO_CHAN_INFO_RAW)) #define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0) +#define ADS786X_CHAN(bits) _AD7476_CHAN((bits), 12 - (bits), \ + BIT(IIO_CHAN_INFO_RAW)) static const struct ad7476_chip_info ad7476_chip_info_tbl[] = { [ID_AD7091R] = { @@ -209,6 +214,18 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = { .channel[0] = ADC081S_CHAN(12), .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), }, + [ID_ADS7866] = { + .channel[0] = ADS786X_CHAN(12), + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), + }, + [ID_ADS7867] = { + .channel[0] = ADS786X_CHAN(10), + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), + }, + [ID_ADS7868] = { + .channel[0] = ADS786X_CHAN(8), + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1), + }, }; static const struct iio_info ad7476_info = { @@ -314,6 +331,9 @@ static const struct spi_device_id ad7476_id[] = { {"adc081s", ID_ADC081S}, {"adc101s", ID_ADC101S}, {"adc121s", ID_ADC121S}, + {"ads7866", ID_ADS7866}, + {"ads7867", ID_ADS7867}, + {"ads7868", ID_ADS7868}, {} }; MODULE_DEVICE_TABLE(spi, ad7476_id); diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c new file mode 100644 index 000000000000..ebb8de03bbce --- /dev/null +++ b/drivers/iio/adc/ad7606.c @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD7606 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/util_macros.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#include "ad7606.h" + +/* + * Scales are computed as 5000/32768 and 10000/32768 respectively, + * so that when applied to the raw values they provide mV values + */ +static const unsigned int scale_avail[2] = { + 152588, 305176 +}; + +static const unsigned int ad7606_oversampling_avail[7] = { + 1, 2, 4, 8, 16, 32, 64, +}; + +static int ad7606_reset(struct ad7606_state *st) +{ + if (st->gpio_reset) { + gpiod_set_value(st->gpio_reset, 1); + ndelay(100); /* t_reset >= 100ns */ + gpiod_set_value(st->gpio_reset, 0); + return 0; + } + + return -ENODEV; +} + +static int ad7606_read_samples(struct ad7606_state *st) +{ + unsigned int num = st->chip_info->num_channels; + u16 *data = st->data; + int ret; + + /* + * The frstdata signal is set to high while and after reading the sample + * of the first channel and low for all other channels. This can be used + * to check that the incoming data is correctly aligned. During normal + * operation the data should never become unaligned, but some glitch or + * electrostatic discharge might cause an extra read or clock cycle. + * Monitoring the frstdata signal allows to recover from such failure + * situations. + */ + + if (st->gpio_frstdata) { + ret = st->bops->read_block(st->dev, 1, data); + if (ret) + return ret; + + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + + data++; + num--; + } + + return st->bops->read_block(st->dev, num, data); +} + +static irqreturn_t ad7606_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad7606_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&st->lock); + + ret = ad7606_read_samples(st); + if (ret == 0) + iio_push_to_buffers_with_timestamp(indio_dev, st->data, + iio_get_time_ns(indio_dev)); + + iio_trigger_notify_done(indio_dev->trig); + /* The rising edge of the CONVST signal starts a new conversion. */ + gpiod_set_value(st->gpio_convst, 1); + + mutex_unlock(&st->lock); + + return IRQ_HANDLED; +} + +static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch) +{ + struct ad7606_state *st = iio_priv(indio_dev); + int ret; + + gpiod_set_value(st->gpio_convst, 1); + ret = wait_for_completion_timeout(&st->completion, + msecs_to_jiffies(1000)); + if (!ret) { + ret = -ETIMEDOUT; + goto error_ret; + } + + ret = ad7606_read_samples(st); + if (ret == 0) + ret = st->data[ch]; + +error_ret: + gpiod_set_value(st->gpio_convst, 0); + + return ret; +} + +static int ad7606_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + int ret; + struct ad7606_state *st = iio_priv(indio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = ad7606_scan_direct(indio_dev, chan->address); + iio_device_release_direct_mode(indio_dev); + + if (ret < 0) + return ret; + *val = (short)ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = scale_avail[st->range]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling; + return IIO_VAL_INT; + } + return -EINVAL; +} + +static ssize_t in_voltage_scale_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(scale_avail); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + scale_avail[i]); + + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0); + +static int ad7606_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad7606_state *st = iio_priv(indio_dev); + DECLARE_BITMAP(values, 3); + int i; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + mutex_lock(&st->lock); + i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail)); + gpiod_set_value(st->gpio_range, i); + st->range = i; + mutex_unlock(&st->lock); + + return 0; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + if (val2) + return -EINVAL; + i = find_closest(val, ad7606_oversampling_avail, + ARRAY_SIZE(ad7606_oversampling_avail)); + + values[0] = i; + + mutex_lock(&st->lock); + gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc, + st->gpio_os->info, values); + st->oversampling = ad7606_oversampling_avail[i]; + mutex_unlock(&st->lock); + + return 0; + default: + return -EINVAL; + } +} + +static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64"); + +static struct attribute *ad7606_attributes_os_and_range[] = { + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_os_and_range = { + .attrs = ad7606_attributes_os_and_range, +}; + +static struct attribute *ad7606_attributes_os[] = { + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_os = { + .attrs = ad7606_attributes_os, +}; + +static struct attribute *ad7606_attributes_range[] = { + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_range = { + .attrs = ad7606_attributes_range, +}; + +#define AD760X_CHANNEL(num, mask) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = num, \ + .address = num, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ + .info_mask_shared_by_all = mask, \ + .scan_index = num, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define AD7605_CHANNEL(num) \ + AD760X_CHANNEL(num, 0) + +#define AD7606_CHANNEL(num) \ + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) + +static const struct iio_chan_spec ad7605_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(4), + AD7605_CHANNEL(0), + AD7605_CHANNEL(1), + AD7605_CHANNEL(2), + AD7605_CHANNEL(3), +}; + +static const struct iio_chan_spec ad7606_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(8), + AD7606_CHANNEL(0), + AD7606_CHANNEL(1), + AD7606_CHANNEL(2), + AD7606_CHANNEL(3), + AD7606_CHANNEL(4), + AD7606_CHANNEL(5), + AD7606_CHANNEL(6), + AD7606_CHANNEL(7), +}; + +static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { + /* More devices added in future */ + [ID_AD7605_4] = { + .channels = ad7605_channels, + .num_channels = 5, + }, + [ID_AD7606_8] = { + .channels = ad7606_channels, + .num_channels = 9, + .has_oversampling = true, + }, + [ID_AD7606_6] = { + .channels = ad7606_channels, + .num_channels = 7, + .has_oversampling = true, + }, + [ID_AD7606_4] = { + .channels = ad7606_channels, + .num_channels = 5, + .has_oversampling = true, + }, +}; + +static int ad7606_request_gpios(struct ad7606_state *st) +{ + struct device *dev = st->dev; + + st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_convst)) + return PTR_ERR(st->gpio_convst); + + st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_reset)) + return PTR_ERR(st->gpio_reset); + + st->gpio_range = devm_gpiod_get_optional(dev, "adi,range", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_range)) + return PTR_ERR(st->gpio_range); + + st->gpio_standby = devm_gpiod_get_optional(dev, "standby", + GPIOD_OUT_HIGH); + if (IS_ERR(st->gpio_standby)) + return PTR_ERR(st->gpio_standby); + + st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data", + GPIOD_IN); + if (IS_ERR(st->gpio_frstdata)) + return PTR_ERR(st->gpio_frstdata); + + if (!st->chip_info->has_oversampling) + return 0; + + st->gpio_os = devm_gpiod_get_array_optional(dev, + "adi,oversampling-ratio", + GPIOD_OUT_LOW); + return PTR_ERR_OR_ZERO(st->gpio_os); +} + +/* + * The BUSY signal indicates when conversions are in progress, so when a rising + * edge of CONVST is applied, BUSY goes logic high and transitions low at the + * end of the entire conversion process. The falling edge of the BUSY signal + * triggers this interrupt. + */ +static irqreturn_t ad7606_interrupt(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct ad7606_state *st = iio_priv(indio_dev); + + if (iio_buffer_enabled(indio_dev)) { + gpiod_set_value(st->gpio_convst, 0); + iio_trigger_poll_chained(st->trig); + } else { + complete(&st->completion); + } + + return IRQ_HANDLED; +}; + +static int ad7606_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->trig != trig) + return -EINVAL; + + return 0; +} + +static int ad7606_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + iio_triggered_buffer_postenable(indio_dev); + gpiod_set_value(st->gpio_convst, 1); + + return 0; +} + +static int ad7606_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + gpiod_set_value(st->gpio_convst, 0); + + return iio_triggered_buffer_predisable(indio_dev); +} + +static const struct iio_buffer_setup_ops ad7606_buffer_ops = { + .postenable = &ad7606_buffer_postenable, + .predisable = &ad7606_buffer_predisable, +}; + +static const struct iio_info ad7606_info_no_os_or_range = { + .read_raw = &ad7606_read_raw, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_os_and_range = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_os_and_range, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_os = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_os, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_range = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_range, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_trigger_ops ad7606_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, +}; + +static void ad7606_regulator_disable(void *data) +{ + struct ad7606_state *st = data; + + regulator_disable(st->reg); +} + +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops) +{ + struct ad7606_state *st; + int ret; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + + st->dev = dev; + mutex_init(&st->lock); + st->bops = bops; + st->base_address = base_address; + /* tied to logic low, analog input range is +/- 5V */ + st->range = 0; + st->oversampling = 1; + + st->reg = devm_regulator_get(dev, "avcc"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(dev, "Failed to enable specified AVcc supply\n"); + return ret; + } + + ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st); + if (ret) + return ret; + + st->chip_info = &ad7606_chip_info_tbl[id]; + + ret = ad7606_request_gpios(st); + if (ret) + return ret; + + indio_dev->dev.parent = dev; + if (st->gpio_os) { + if (st->gpio_range) + indio_dev->info = &ad7606_info_os_and_range; + else + indio_dev->info = &ad7606_info_os; + } else { + if (st->gpio_range) + indio_dev->info = &ad7606_info_range; + else + indio_dev->info = &ad7606_info_no_os_or_range; + } + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = name; + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; + + init_completion(&st->completion); + + ret = ad7606_reset(st); + if (ret) + dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n"); + + st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + if (!st->trig) + return -ENOMEM; + + st->trig->ops = &ad7606_trigger_ops; + st->trig->dev.parent = dev; + iio_trigger_set_drvdata(st->trig, indio_dev); + ret = devm_iio_trigger_register(dev, st->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(st->trig); + + ret = devm_request_threaded_irq(dev, irq, + NULL, + &ad7606_interrupt, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + name, indio_dev); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + &iio_pollfunc_store_time, + &ad7606_trigger_handler, + &ad7606_buffer_ops); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_GPL(ad7606_probe); + +#ifdef CONFIG_PM_SLEEP + +static int ad7606_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, 1); + gpiod_set_value(st->gpio_standby, 0); + } + + return 0; +} + +static int ad7606_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, st->range); + gpiod_set_value(st->gpio_standby, 1); + ad7606_reset(st); + } + + return 0; +} + +SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume); +EXPORT_SYMBOL_GPL(ad7606_pm_ops); + +#endif + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h new file mode 100644 index 000000000000..5d12410f68e1 --- /dev/null +++ b/drivers/iio/adc/ad7606.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * AD7606 ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#ifndef IIO_ADC_AD7606_H_ +#define IIO_ADC_AD7606_H_ + +/** + * struct ad7606_chip_info - chip specific information + * @channels: channel specification + * @num_channels: number of channels + * @has_oversampling: whether the device has oversampling support + */ +struct ad7606_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; + bool has_oversampling; +}; + +/** + * struct ad7606_state - driver instance specific data + * @dev pointer to kernel device + * @chip_info entry in the table of chips that describes this device + * @reg regulator info for the the power supply of the device + * @bops bus operations (SPI or parallel) + * @range voltage range selection, selects which scale to apply + * @oversampling oversampling selection + * @base_address address from where to read data in parallel operation + * @lock protect sensor state from concurrent accesses to GPIOs + * @gpio_convst GPIO descriptor for conversion start signal (CONVST) + * @gpio_reset GPIO descriptor for device hard-reset + * @gpio_range GPIO descriptor for range selection + * @gpio_standby GPIO descriptor for stand-by signal (STBY), + * controls power-down mode of device + * @gpio_frstdata GPIO descriptor for reading from device when data + * is being read on the first channel + * @gpio_os GPIO descriptors to control oversampling on the device + * @complete completion to indicate end of conversion + * @trig The IIO trigger associated with the device. + * @data buffer for reading data from the device + */ +struct ad7606_state { + struct device *dev; + const struct ad7606_chip_info *chip_info; + struct regulator *reg; + const struct ad7606_bus_ops *bops; + unsigned int range; + unsigned int oversampling; + void __iomem *base_address; + + struct mutex lock; /* protect sensor state */ + struct gpio_desc *gpio_convst; + struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_range; + struct gpio_desc *gpio_standby; + struct gpio_desc *gpio_frstdata; + struct gpio_descs *gpio_os; + struct iio_trigger *trig; + struct completion completion; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + * 8 * 16-bit samples + 64-bit timestamp + */ + unsigned short data[12] ____cacheline_aligned; +}; + +/** + * struct ad7606_bus_ops - driver bus operations + * @read_block function pointer for reading blocks of data + */ +struct ad7606_bus_ops { + /* more methods added in future? */ + int (*read_block)(struct device *dev, int num, void *data); +}; + +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops); + +enum ad7606_supported_device_ids { + ID_AD7605_4, + ID_AD7606_8, + ID_AD7606_6, + ID_AD7606_4 +}; + +#ifdef CONFIG_PM_SLEEP +extern const struct dev_pm_ops ad7606_pm_ops; +#define AD7606_PM_OPS (&ad7606_pm_ops) +#else +#define AD7606_PM_OPS NULL +#endif + +#endif /* IIO_ADC_AD7606_H_ */ diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c new file mode 100644 index 000000000000..1b08028facde --- /dev/null +++ b/drivers/iio/adc/ad7606_par.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD7606 Parallel Interface ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <linux/iio/iio.h> +#include "ad7606.h" + +static int ad7606_par16_read_block(struct device *dev, + int count, void *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + insw((unsigned long)st->base_address, buf, count); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_par16_bops = { + .read_block = ad7606_par16_read_block, +}; + +static int ad7606_par8_read_block(struct device *dev, + int count, void *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + insb((unsigned long)st->base_address, buf, count * 2); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_par8_bops = { + .read_block = ad7606_par8_read_block, +}; + +static int ad7606_par_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + void __iomem *addr; + resource_size_t remap_size; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq: %d\n", irq); + return irq; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + + remap_size = resource_size(res); + + return ad7606_probe(&pdev->dev, irq, addr, + id->name, id->driver_data, + remap_size > 1 ? &ad7606_par16_bops : + &ad7606_par8_bops); +} + +static const struct platform_device_id ad7606_driver_ids[] = { + { .name = "ad7605-4", .driver_data = ID_AD7605_4, }, + { .name = "ad7606-4", .driver_data = ID_AD7606_4, }, + { .name = "ad7606-6", .driver_data = ID_AD7606_6, }, + { .name = "ad7606-8", .driver_data = ID_AD7606_8, }, + { } +}; +MODULE_DEVICE_TABLE(platform, ad7606_driver_ids); + +static const struct of_device_id ad7606_of_match[] = { + { .compatible = "adi,ad7605-4" }, + { .compatible = "adi,ad7606-4" }, + { .compatible = "adi,ad7606-6" }, + { .compatible = "adi,ad7606-8" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad7606_of_match); + +static struct platform_driver ad7606_driver = { + .probe = ad7606_par_probe, + .id_table = ad7606_driver_ids, + .driver = { + .name = "ad7606", + .pm = AD7606_PM_OPS, + .of_match_table = ad7606_of_match, + }, +}; +module_platform_driver(ad7606_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c new file mode 100644 index 000000000000..4fd0ec36a086 --- /dev/null +++ b/drivers/iio/adc/ad7606_spi.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD7606 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/types.h> +#include <linux/err.h> + +#include <linux/iio/iio.h> +#include "ad7606.h" + +#define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */ + +static int ad7606_spi_read_block(struct device *dev, + int count, void *buf) +{ + struct spi_device *spi = to_spi_device(dev); + int i, ret; + unsigned short *data = buf; + __be16 *bdata = buf; + + ret = spi_read(spi, buf, count * 2); + if (ret < 0) { + dev_err(&spi->dev, "SPI read error\n"); + return ret; + } + + for (i = 0; i < count; i++) + data[i] = be16_to_cpu(bdata[i]); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_spi_bops = { + .read_block = ad7606_spi_read_block, +}; + +static int ad7606_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return ad7606_probe(&spi->dev, spi->irq, NULL, + id->name, id->driver_data, + &ad7606_spi_bops); +} + +static const struct spi_device_id ad7606_id_table[] = { + { "ad7605-4", ID_AD7605_4 }, + { "ad7606-4", ID_AD7606_4 }, + { "ad7606-6", ID_AD7606_6 }, + { "ad7606-8", ID_AD7606_8 }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad7606_id_table); + +static const struct of_device_id ad7606_of_match[] = { + { .compatible = "adi,ad7605-4" }, + { .compatible = "adi,ad7606-4" }, + { .compatible = "adi,ad7606-6" }, + { .compatible = "adi,ad7606-8" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad7606_of_match); + +static struct spi_driver ad7606_driver = { + .driver = { + .name = "ad7606", + .of_match_table = ad7606_of_match, + .pm = AD7606_PM_OPS, + }, + .probe = ad7606_spi_probe, + .id_table = ad7606_id_table, +}; +module_spi_driver(ad7606_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c new file mode 100644 index 000000000000..0d132708c429 --- /dev/null +++ b/drivers/iio/adc/ad7768-1.c @@ -0,0 +1,655 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Analog Devices AD7768-1 SPI ADC driver + * + * Copyright 2017 Analog Devices Inc. + */ +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +/* AD7768 registers definition */ +#define AD7768_REG_CHIP_TYPE 0x3 +#define AD7768_REG_PROD_ID_L 0x4 +#define AD7768_REG_PROD_ID_H 0x5 +#define AD7768_REG_CHIP_GRADE 0x6 +#define AD7768_REG_SCRATCH_PAD 0x0A +#define AD7768_REG_VENDOR_L 0x0C +#define AD7768_REG_VENDOR_H 0x0D +#define AD7768_REG_INTERFACE_FORMAT 0x14 +#define AD7768_REG_POWER_CLOCK 0x15 +#define AD7768_REG_ANALOG 0x16 +#define AD7768_REG_ANALOG2 0x17 +#define AD7768_REG_CONVERSION 0x18 +#define AD7768_REG_DIGITAL_FILTER 0x19 +#define AD7768_REG_SINC3_DEC_RATE_MSB 0x1A +#define AD7768_REG_SINC3_DEC_RATE_LSB 0x1B +#define AD7768_REG_DUTY_CYCLE_RATIO 0x1C +#define AD7768_REG_SYNC_RESET 0x1D +#define AD7768_REG_GPIO_CONTROL 0x1E +#define AD7768_REG_GPIO_WRITE 0x1F +#define AD7768_REG_GPIO_READ 0x20 +#define AD7768_REG_OFFSET_HI 0x21 +#define AD7768_REG_OFFSET_MID 0x22 +#define AD7768_REG_OFFSET_LO 0x23 +#define AD7768_REG_GAIN_HI 0x24 +#define AD7768_REG_GAIN_MID 0x25 +#define AD7768_REG_GAIN_LO 0x26 +#define AD7768_REG_SPI_DIAG_ENABLE 0x28 +#define AD7768_REG_ADC_DIAG_ENABLE 0x29 +#define AD7768_REG_DIG_DIAG_ENABLE 0x2A +#define AD7768_REG_ADC_DATA 0x2C +#define AD7768_REG_MASTER_STATUS 0x2D +#define AD7768_REG_SPI_DIAG_STATUS 0x2E +#define AD7768_REG_ADC_DIAG_STATUS 0x2F +#define AD7768_REG_DIG_DIAG_STATUS 0x30 +#define AD7768_REG_MCLK_COUNTER 0x31 + +/* AD7768_REG_POWER_CLOCK */ +#define AD7768_PWR_MCLK_DIV_MSK GENMASK(5, 4) +#define AD7768_PWR_MCLK_DIV(x) FIELD_PREP(AD7768_PWR_MCLK_DIV_MSK, x) +#define AD7768_PWR_PWRMODE_MSK GENMASK(1, 0) +#define AD7768_PWR_PWRMODE(x) FIELD_PREP(AD7768_PWR_PWRMODE_MSK, x) + +/* AD7768_REG_DIGITAL_FILTER */ +#define AD7768_DIG_FIL_FIL_MSK GENMASK(6, 4) +#define AD7768_DIG_FIL_FIL(x) FIELD_PREP(AD7768_DIG_FIL_FIL_MSK, x) +#define AD7768_DIG_FIL_DEC_MSK GENMASK(2, 0) +#define AD7768_DIG_FIL_DEC_RATE(x) FIELD_PREP(AD7768_DIG_FIL_DEC_MSK, x) + +/* AD7768_REG_CONVERSION */ +#define AD7768_CONV_MODE_MSK GENMASK(2, 0) +#define AD7768_CONV_MODE(x) FIELD_PREP(AD7768_CONV_MODE_MSK, x) + +#define AD7768_RD_FLAG_MSK(x) (BIT(6) | ((x) & 0x3F)) +#define AD7768_WR_FLAG_MSK(x) ((x) & 0x3F) + +enum ad7768_conv_mode { + AD7768_CONTINUOUS, + AD7768_ONE_SHOT, + AD7768_SINGLE, + AD7768_PERIODIC, + AD7768_STANDBY +}; + +enum ad7768_pwrmode { + AD7768_ECO_MODE = 0, + AD7768_MED_MODE = 2, + AD7768_FAST_MODE = 3 +}; + +enum ad7768_mclk_div { + AD7768_MCLK_DIV_16, + AD7768_MCLK_DIV_8, + AD7768_MCLK_DIV_4, + AD7768_MCLK_DIV_2 +}; + +enum ad7768_dec_rate { + AD7768_DEC_RATE_32 = 0, + AD7768_DEC_RATE_64 = 1, + AD7768_DEC_RATE_128 = 2, + AD7768_DEC_RATE_256 = 3, + AD7768_DEC_RATE_512 = 4, + AD7768_DEC_RATE_1024 = 5, + AD7768_DEC_RATE_8 = 9, + AD7768_DEC_RATE_16 = 10 +}; + +struct ad7768_clk_configuration { + enum ad7768_mclk_div mclk_div; + enum ad7768_dec_rate dec_rate; + unsigned int clk_div; + enum ad7768_pwrmode pwrmode; +}; + +static const struct ad7768_clk_configuration ad7768_clk_config[] = { + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_8, 16, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_16, 32, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_32, 64, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_64, 128, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_2, AD7768_DEC_RATE_128, 256, AD7768_FAST_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_128, 512, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_256, 1024, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_512, 2048, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_4, AD7768_DEC_RATE_1024, 4096, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_8, AD7768_DEC_RATE_1024, 8192, AD7768_MED_MODE }, + { AD7768_MCLK_DIV_16, AD7768_DEC_RATE_1024, 16384, AD7768_ECO_MODE }, +}; + +static const struct iio_chan_spec ad7768_channels[] = { + { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .indexed = 1, + .channel = 0, + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 32, + .shift = 8, + .endianness = IIO_BE, + }, + }, +}; + +struct ad7768_state { + struct spi_device *spi; + struct regulator *vref; + struct mutex lock; + struct clk *mclk; + unsigned int mclk_freq; + unsigned int samp_freq; + struct completion completion; + struct iio_trigger *trig; + struct gpio_desc *gpio_sync_in; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + union { + __be32 d32; + u8 d8[2]; + } data ____cacheline_aligned; +}; + +static int ad7768_spi_reg_read(struct ad7768_state *st, unsigned int addr, + unsigned int len) +{ + unsigned int shift; + int ret; + + shift = 32 - (8 * len); + st->data.d8[0] = AD7768_RD_FLAG_MSK(addr); + + ret = spi_write_then_read(st->spi, st->data.d8, 1, + &st->data.d32, len); + if (ret < 0) + return ret; + + return (be32_to_cpu(st->data.d32) >> shift); +} + +static int ad7768_spi_reg_write(struct ad7768_state *st, + unsigned int addr, + unsigned int val) +{ + st->data.d8[0] = AD7768_WR_FLAG_MSK(addr); + st->data.d8[1] = val & 0xFF; + + return spi_write(st->spi, st->data.d8, 2); +} + +static int ad7768_set_mode(struct ad7768_state *st, + enum ad7768_conv_mode mode) +{ + int regval; + + regval = ad7768_spi_reg_read(st, AD7768_REG_CONVERSION, 1); + if (regval < 0) + return regval; + + regval &= ~AD7768_CONV_MODE_MSK; + regval |= AD7768_CONV_MODE(mode); + + return ad7768_spi_reg_write(st, AD7768_REG_CONVERSION, regval); +} + +static int ad7768_scan_direct(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int readval, ret; + + reinit_completion(&st->completion); + + ret = ad7768_set_mode(st, AD7768_ONE_SHOT); + if (ret < 0) + return ret; + + ret = wait_for_completion_timeout(&st->completion, + msecs_to_jiffies(1000)); + if (!ret) + return -ETIMEDOUT; + + readval = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3); + if (readval < 0) + return readval; + /* + * Any SPI configuration of the AD7768-1 can only be + * performed in continuous conversion mode. + */ + ret = ad7768_set_mode(st, AD7768_CONTINUOUS); + if (ret < 0) + return ret; + + return readval; +} + +static int ad7768_reg_access(struct iio_dev *indio_dev, + unsigned int reg, + unsigned int writeval, + unsigned int *readval) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&st->lock); + if (readval) { + ret = ad7768_spi_reg_read(st, reg, 1); + if (ret < 0) + goto err_unlock; + *readval = ret; + ret = 0; + } else { + ret = ad7768_spi_reg_write(st, reg, writeval); + } +err_unlock: + mutex_unlock(&st->lock); + + return ret; +} + +static int ad7768_set_dig_fil(struct ad7768_state *st, + enum ad7768_dec_rate dec_rate) +{ + unsigned int mode; + int ret; + + if (dec_rate == AD7768_DEC_RATE_8 || dec_rate == AD7768_DEC_RATE_16) + mode = AD7768_DIG_FIL_FIL(dec_rate); + else + mode = AD7768_DIG_FIL_DEC_RATE(dec_rate); + + ret = ad7768_spi_reg_write(st, AD7768_REG_DIGITAL_FILTER, mode); + if (ret < 0) + return ret; + + /* A sync-in pulse is required every time the filter dec rate changes */ + gpiod_set_value(st->gpio_sync_in, 1); + gpiod_set_value(st->gpio_sync_in, 0); + + return 0; +} + +static int ad7768_set_freq(struct ad7768_state *st, + unsigned int freq) +{ + unsigned int diff_new, diff_old, pwr_mode, i, idx; + int res, ret; + + diff_old = U32_MAX; + idx = 0; + + res = DIV_ROUND_CLOSEST(st->mclk_freq, freq); + + /* Find the closest match for the desired sampling frequency */ + for (i = 0; i < ARRAY_SIZE(ad7768_clk_config); i++) { + diff_new = abs(res - ad7768_clk_config[i].clk_div); + if (diff_new < diff_old) { + diff_old = diff_new; + idx = i; + } + } + + /* + * Set both the mclk_div and pwrmode with a single write to the + * POWER_CLOCK register + */ + pwr_mode = AD7768_PWR_MCLK_DIV(ad7768_clk_config[idx].mclk_div) | + AD7768_PWR_PWRMODE(ad7768_clk_config[idx].pwrmode); + ret = ad7768_spi_reg_write(st, AD7768_REG_POWER_CLOCK, pwr_mode); + if (ret < 0) + return ret; + + ret = ad7768_set_dig_fil(st, ad7768_clk_config[idx].dec_rate); + if (ret < 0) + return ret; + + st->samp_freq = DIV_ROUND_CLOSEST(st->mclk_freq, + ad7768_clk_config[idx].clk_div); + + return 0; +} + +static ssize_t ad7768_sampling_freq_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct ad7768_state *st = iio_priv(indio_dev); + unsigned int freq; + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(ad7768_clk_config); i++) { + freq = DIV_ROUND_CLOSEST(st->mclk_freq, + ad7768_clk_config[i].clk_div); + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", freq); + } + + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(ad7768_sampling_freq_avail); + +static int ad7768_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long info) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int scale_uv, ret; + + switch (info) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = ad7768_scan_direct(indio_dev); + if (ret >= 0) + *val = ret; + + iio_device_release_direct_mode(indio_dev); + if (ret < 0) + return ret; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + scale_uv = regulator_get_voltage(st->vref); + if (scale_uv < 0) + return scale_uv; + + *val = (scale_uv * 2) / 1000; + *val2 = chan->scan_type.realbits; + + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->samp_freq; + + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int ad7768_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + struct ad7768_state *st = iio_priv(indio_dev); + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + return ad7768_set_freq(st, val); + default: + return -EINVAL; + } +} + +static struct attribute *ad7768_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7768_group = { + .attrs = ad7768_attributes, +}; + +static const struct iio_info ad7768_info = { + .attrs = &ad7768_group, + .read_raw = &ad7768_read_raw, + .write_raw = &ad7768_write_raw, + .debugfs_reg_access = &ad7768_reg_access, +}; + +static int ad7768_setup(struct ad7768_state *st) +{ + int ret; + + /* + * Two writes to the SPI_RESET[1:0] bits are required to initiate + * a software reset. The bits must first be set to 11, and then + * to 10. When the sequence is detected, the reset occurs. + * See the datasheet, page 70. + */ + ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x3); + if (ret) + return ret; + + ret = ad7768_spi_reg_write(st, AD7768_REG_SYNC_RESET, 0x2); + if (ret) + return ret; + + st->gpio_sync_in = devm_gpiod_get(&st->spi->dev, "adi,sync-in", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_sync_in)) + return PTR_ERR(st->gpio_sync_in); + + /* Set the default sampling frequency to 32000 kSPS */ + return ad7768_set_freq(st, 32000); +} + +static irqreturn_t ad7768_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&st->lock); + + ret = spi_read(st->spi, &st->data.d32, 3); + if (ret < 0) + goto err_unlock; + + iio_push_to_buffers_with_timestamp(indio_dev, &st->data.d32, + iio_get_time_ns(indio_dev)); + + iio_trigger_notify_done(indio_dev->trig); +err_unlock: + mutex_unlock(&st->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t ad7768_interrupt(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct ad7768_state *st = iio_priv(indio_dev); + + if (iio_buffer_enabled(indio_dev)) + iio_trigger_poll(st->trig); + else + complete(&st->completion); + + return IRQ_HANDLED; +}; + +static int ad7768_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + + iio_triggered_buffer_postenable(indio_dev); + /* + * Write a 1 to the LSB of the INTERFACE_FORMAT register to enter + * continuous read mode. Subsequent data reads do not require an + * initial 8-bit write to query the ADC_DATA register. + */ + return ad7768_spi_reg_write(st, AD7768_REG_INTERFACE_FORMAT, 0x01); +} + +static int ad7768_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + /* + * To exit continuous read mode, perform a single read of the ADC_DATA + * reg (0x2C), which allows further configuration of the device. + */ + ret = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3); + if (ret < 0) + return ret; + + return iio_triggered_buffer_predisable(indio_dev); +} + +static const struct iio_buffer_setup_ops ad7768_buffer_ops = { + .postenable = &ad7768_buffer_postenable, + .predisable = &ad7768_buffer_predisable, +}; + +static const struct iio_trigger_ops ad7768_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, +}; + +static void ad7768_regulator_disable(void *data) +{ + struct ad7768_state *st = data; + + regulator_disable(st->vref); +} + +static void ad7768_clk_disable(void *data) +{ + struct ad7768_state *st = data; + + clk_disable_unprepare(st->mclk); +} + +static int ad7768_probe(struct spi_device *spi) +{ + struct ad7768_state *st; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + st->spi = spi; + + st->vref = devm_regulator_get(&spi->dev, "vref"); + if (IS_ERR(st->vref)) + return PTR_ERR(st->vref); + + ret = regulator_enable(st->vref); + if (ret) { + dev_err(&spi->dev, "Failed to enable specified vref supply\n"); + return ret; + } + + ret = devm_add_action_or_reset(&spi->dev, ad7768_regulator_disable, st); + if (ret) + return ret; + + st->mclk = devm_clk_get(&spi->dev, "mclk"); + if (IS_ERR(st->mclk)) + return PTR_ERR(st->mclk); + + ret = clk_prepare_enable(st->mclk); + if (ret < 0) + return ret; + + ret = devm_add_action_or_reset(&spi->dev, ad7768_clk_disable, st); + if (ret) + return ret; + + st->mclk_freq = clk_get_rate(st->mclk); + + spi_set_drvdata(spi, indio_dev); + mutex_init(&st->lock); + + indio_dev->channels = ad7768_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7768_channels); + indio_dev->dev.parent = &spi->dev; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->info = &ad7768_info; + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_TRIGGERED; + + ret = ad7768_setup(st); + if (ret < 0) { + dev_err(&spi->dev, "AD7768 setup failed\n"); + return ret; + } + + st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + if (!st->trig) + return -ENOMEM; + + st->trig->ops = &ad7768_trigger_ops; + st->trig->dev.parent = &spi->dev; + iio_trigger_set_drvdata(st->trig, indio_dev); + ret = devm_iio_trigger_register(&spi->dev, st->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(st->trig); + + init_completion(&st->completion); + + ret = devm_request_irq(&spi->dev, spi->irq, + &ad7768_interrupt, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + indio_dev->name, indio_dev); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, + &iio_pollfunc_store_time, + &ad7768_trigger_handler, + &ad7768_buffer_ops); + if (ret) + return ret; + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id ad7768_id_table[] = { + { "ad7768-1", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad7768_id_table); + +static const struct of_device_id ad7768_of_match[] = { + { .compatible = "adi,ad7768-1" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad7768_of_match); + +static struct spi_driver ad7768_driver = { + .driver = { + .name = "ad7768-1", + .of_match_table = ad7768_of_match, + }, + .probe = ad7768_probe, + .id_table = ad7768_id_table, +}; +module_spi_driver(ad7768_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7768-1 ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index fa2d2b5767f3..1ca2c4d39f87 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -115,6 +115,7 @@ #define MAX_ADC_V2_CHANNELS 10 #define MAX_ADC_V1_CHANNELS 8 #define MAX_EXYNOS3250_ADC_CHANNELS 2 +#define MAX_EXYNOS4212_ADC_CHANNELS 4 #define MAX_S5PV210_ADC_CHANNELS 10 /* Bit definitions common for ADC_V1 and ADC_V2 */ @@ -271,6 +272,19 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info, writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); } +/* Exynos4212 and 4412 is like ADCv1 but with four channels only */ +static const struct exynos_adc_data exynos4212_adc_data = { + .num_channels = MAX_EXYNOS4212_ADC_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_adc_phy = true, + .phy_offset = EXYNOS_ADCV1_PHY_OFFSET, + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .clear_irq = exynos_adc_v1_clear_irq, + .start_conv = exynos_adc_v1_start_conv, +}; + static const struct exynos_adc_data exynos_adc_v1_data = { .num_channels = MAX_ADC_V1_CHANNELS, .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ @@ -493,6 +507,9 @@ static const struct of_device_id exynos_adc_match[] = { .compatible = "samsung,s5pv210-adc", .data = &exynos_adc_s5pv210_data, }, { + .compatible = "samsung,exynos4212-adc", + .data = &exynos4212_adc_data, + }, { .compatible = "samsung,exynos-adc-v1", .data = &exynos_adc_v1_data, }, { @@ -929,7 +946,7 @@ static int exynos_adc_remove(struct platform_device *pdev) struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); - if (IS_REACHABLE(CONFIG_INPUT)) { + if (IS_REACHABLE(CONFIG_INPUT) && info->input) { free_irq(info->tsirq, info); input_unregister_device(info->input); } diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c new file mode 100644 index 000000000000..6ee1673deb0d --- /dev/null +++ b/drivers/iio/adc/ingenic-adc.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ADC driver for the Ingenic JZ47xx SoCs + * Copyright (c) 2019 Artur Rojek <contact@artur-rojek.eu> + * + * based on drivers/mfd/jz4740-adc.c + */ + +#include <dt-bindings/iio/adc/ingenic,adc.h> +#include <linux/clk.h> +#include <linux/iio/iio.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#define JZ_ADC_REG_ENABLE 0x00 +#define JZ_ADC_REG_CFG 0x04 +#define JZ_ADC_REG_CTRL 0x08 +#define JZ_ADC_REG_STATUS 0x0c +#define JZ_ADC_REG_ADTCH 0x18 +#define JZ_ADC_REG_ADBDAT 0x1c +#define JZ_ADC_REG_ADSDAT 0x20 + +#define JZ_ADC_REG_CFG_BAT_MD BIT(4) + +#define JZ_ADC_AUX_VREF 3300 +#define JZ_ADC_AUX_VREF_BITS 12 +#define JZ_ADC_BATTERY_LOW_VREF 2500 +#define JZ_ADC_BATTERY_LOW_VREF_BITS 12 +#define JZ4725B_ADC_BATTERY_HIGH_VREF 7500 +#define JZ4725B_ADC_BATTERY_HIGH_VREF_BITS 10 +#define JZ4740_ADC_BATTERY_HIGH_VREF (7500 * 0.986) +#define JZ4740_ADC_BATTERY_HIGH_VREF_BITS 12 + +struct ingenic_adc_soc_data { + unsigned int battery_high_vref; + unsigned int battery_high_vref_bits; + const int *battery_raw_avail; + size_t battery_raw_avail_size; + const int *battery_scale_avail; + size_t battery_scale_avail_size; +}; + +struct ingenic_adc { + void __iomem *base; + struct clk *clk; + struct mutex lock; + const struct ingenic_adc_soc_data *soc_data; + bool low_vref_mode; +}; + +static void ingenic_adc_set_config(struct ingenic_adc *adc, + uint32_t mask, + uint32_t val) +{ + uint32_t cfg; + + clk_enable(adc->clk); + mutex_lock(&adc->lock); + + cfg = readl(adc->base + JZ_ADC_REG_CFG) & ~mask; + cfg |= val; + writel(cfg, adc->base + JZ_ADC_REG_CFG); + + mutex_unlock(&adc->lock); + clk_disable(adc->clk); +} + +static void ingenic_adc_enable(struct ingenic_adc *adc, + int engine, + bool enabled) +{ + u8 val; + + mutex_lock(&adc->lock); + val = readb(adc->base + JZ_ADC_REG_ENABLE); + + if (enabled) + val |= BIT(engine); + else + val &= ~BIT(engine); + + writeb(val, adc->base + JZ_ADC_REG_ENABLE); + mutex_unlock(&adc->lock); +} + +static int ingenic_adc_capture(struct ingenic_adc *adc, + int engine) +{ + u8 val; + int ret; + + ingenic_adc_enable(adc, engine, true); + ret = readb_poll_timeout(adc->base + JZ_ADC_REG_ENABLE, val, + !(val & BIT(engine)), 250, 1000); + if (ret) + ingenic_adc_enable(adc, engine, false); + + return ret; +} + +static int ingenic_adc_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long m) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_SCALE: + switch (chan->channel) { + case INGENIC_ADC_BATTERY: + if (val > JZ_ADC_BATTERY_LOW_VREF) { + ingenic_adc_set_config(adc, + JZ_ADC_REG_CFG_BAT_MD, + 0); + adc->low_vref_mode = false; + } else { + ingenic_adc_set_config(adc, + JZ_ADC_REG_CFG_BAT_MD, + JZ_ADC_REG_CFG_BAT_MD); + adc->low_vref_mode = true; + } + return 0; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static const int jz4725b_adc_battery_raw_avail[] = { + 0, 1, (1 << JZ_ADC_BATTERY_LOW_VREF_BITS) - 1, +}; + +static const int jz4725b_adc_battery_scale_avail[] = { + JZ4725B_ADC_BATTERY_HIGH_VREF, JZ4725B_ADC_BATTERY_HIGH_VREF_BITS, + JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS, +}; + +static const int jz4740_adc_battery_raw_avail[] = { + 0, 1, (1 << JZ_ADC_BATTERY_LOW_VREF_BITS) - 1, +}; + +static const int jz4740_adc_battery_scale_avail[] = { + JZ4740_ADC_BATTERY_HIGH_VREF, JZ4740_ADC_BATTERY_HIGH_VREF_BITS, + JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS, +}; + +static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = { + .battery_high_vref = JZ4725B_ADC_BATTERY_HIGH_VREF, + .battery_high_vref_bits = JZ4725B_ADC_BATTERY_HIGH_VREF_BITS, + .battery_raw_avail = jz4725b_adc_battery_raw_avail, + .battery_raw_avail_size = ARRAY_SIZE(jz4725b_adc_battery_raw_avail), + .battery_scale_avail = jz4725b_adc_battery_scale_avail, + .battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail), +}; + +static const struct ingenic_adc_soc_data jz4740_adc_soc_data = { + .battery_high_vref = JZ4740_ADC_BATTERY_HIGH_VREF, + .battery_high_vref_bits = JZ4740_ADC_BATTERY_HIGH_VREF_BITS, + .battery_raw_avail = jz4740_adc_battery_raw_avail, + .battery_raw_avail_size = ARRAY_SIZE(jz4740_adc_battery_raw_avail), + .battery_scale_avail = jz4740_adc_battery_scale_avail, + .battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail), +}; + +static int ingenic_adc_read_avail(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + const int **vals, + int *type, + int *length, + long m) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + *type = IIO_VAL_INT; + *length = adc->soc_data->battery_raw_avail_size; + *vals = adc->soc_data->battery_raw_avail; + return IIO_AVAIL_RANGE; + case IIO_CHAN_INFO_SCALE: + *type = IIO_VAL_FRACTIONAL_LOG2; + *length = adc->soc_data->battery_scale_avail_size; + *vals = adc->soc_data->battery_scale_avail; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + }; +} + +static int ingenic_adc_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ingenic_adc *adc = iio_priv(iio_dev); + int ret; + + switch (m) { + case IIO_CHAN_INFO_RAW: + clk_enable(adc->clk); + ret = ingenic_adc_capture(adc, chan->channel); + if (ret) { + clk_disable(adc->clk); + return ret; + } + + switch (chan->channel) { + case INGENIC_ADC_AUX: + *val = readw(adc->base + JZ_ADC_REG_ADSDAT); + break; + case INGENIC_ADC_BATTERY: + *val = readw(adc->base + JZ_ADC_REG_ADBDAT); + break; + } + + clk_disable(adc->clk); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + switch (chan->channel) { + case INGENIC_ADC_AUX: + *val = JZ_ADC_AUX_VREF; + *val2 = JZ_ADC_AUX_VREF_BITS; + break; + case INGENIC_ADC_BATTERY: + if (adc->low_vref_mode) { + *val = JZ_ADC_BATTERY_LOW_VREF; + *val2 = JZ_ADC_BATTERY_LOW_VREF_BITS; + } else { + *val = adc->soc_data->battery_high_vref; + *val2 = adc->soc_data->battery_high_vref_bits; + } + break; + } + + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static void ingenic_adc_clk_cleanup(void *data) +{ + clk_unprepare(data); +} + +static const struct iio_info ingenic_adc_info = { + .write_raw = ingenic_adc_write_raw, + .read_raw = ingenic_adc_read_raw, + .read_avail = ingenic_adc_read_avail, +}; + +static const struct iio_chan_spec ingenic_channels[] = { + { + .extend_name = "aux", + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .indexed = 1, + .channel = INGENIC_ADC_AUX, + }, + { + .extend_name = "battery", + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .indexed = 1, + .channel = INGENIC_ADC_BATTERY, + }, +}; + +static int ingenic_adc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *iio_dev; + struct ingenic_adc *adc; + struct resource *mem_base; + const struct ingenic_adc_soc_data *soc_data; + int ret; + + soc_data = device_get_match_data(dev); + if (!soc_data) + return -EINVAL; + + iio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!iio_dev) + return -ENOMEM; + + adc = iio_priv(iio_dev); + mutex_init(&adc->lock); + adc->soc_data = soc_data; + + mem_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + adc->base = devm_ioremap_resource(dev, mem_base); + if (IS_ERR(adc->base)) { + dev_err(dev, "Unable to ioremap mmio resource\n"); + return PTR_ERR(adc->base); + } + + adc->clk = devm_clk_get(dev, "adc"); + if (IS_ERR(adc->clk)) { + dev_err(dev, "Unable to get clock\n"); + return PTR_ERR(adc->clk); + } + + ret = clk_prepare_enable(adc->clk); + if (ret) { + dev_err(dev, "Failed to enable clock\n"); + return ret; + } + + /* Put hardware in a known passive state. */ + writeb(0x00, adc->base + JZ_ADC_REG_ENABLE); + writeb(0xff, adc->base + JZ_ADC_REG_CTRL); + clk_disable(adc->clk); + + ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk); + if (ret) { + dev_err(dev, "Unable to add action\n"); + return ret; + } + + iio_dev->dev.parent = dev; + iio_dev->name = "jz-adc"; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = ingenic_channels; + iio_dev->num_channels = ARRAY_SIZE(ingenic_channels); + iio_dev->info = &ingenic_adc_info; + + ret = devm_iio_device_register(dev, iio_dev); + if (ret) + dev_err(dev, "Unable to register IIO device\n"); + + return ret; +} + +#ifdef CONFIG_OF +static const struct of_device_id ingenic_adc_of_match[] = { + { .compatible = "ingenic,jz4725b-adc", .data = &jz4725b_adc_soc_data, }, + { .compatible = "ingenic,jz4740-adc", .data = &jz4740_adc_soc_data, }, + { }, +}; +MODULE_DEVICE_TABLE(of, ingenic_adc_of_match); +#endif + +static struct platform_driver ingenic_adc_driver = { + .driver = { + .name = "ingenic-adc", + .of_match_table = of_match_ptr(ingenic_adc_of_match), + }, + .probe = ingenic_adc_probe, +}; +module_platform_driver(ingenic_adc_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/lpc32xx_adc.c b/drivers/iio/adc/lpc32xx_adc.c index 20b36690fa4f..e361c1532a75 100644 --- a/drivers/iio/adc/lpc32xx_adc.c +++ b/drivers/iio/adc/lpc32xx_adc.c @@ -1,23 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * lpc32xx_adc.c - Support for ADC in LPC32XX * * 3-channel, 10-bit ADC * * Copyright (C) 2011, 2012 Roland Stigge <stigge@antcom.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c index 729becb2d3d9..f8600fbcdfe3 100644 --- a/drivers/iio/adc/meson_saradc.c +++ b/drivers/iio/adc/meson_saradc.c @@ -26,6 +26,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/mfd/syscon.h> #define MESON_SAR_ADC_REG0 0x00 #define MESON_SAR_ADC_REG0_PANEL_DETECT BIT(31) @@ -174,6 +175,9 @@ #define MESON_SAR_ADC_EFUSE_BYTE3_UPPER_ADC_VAL GENMASK(6, 0) #define MESON_SAR_ADC_EFUSE_BYTE3_IS_CALIBRATED BIT(7) +#define MESON_HHI_DPLL_TOP_0 0x318 +#define MESON_HHI_DPLL_TOP_0_TSC_BIT4 BIT(9) + /* for use with IIO_VAL_INT_PLUS_MICRO */ #define MILLION 1000000 @@ -280,6 +284,7 @@ struct meson_sar_adc_priv { struct completion done; int calibbias; int calibscale; + struct regmap *tsc_regmap; bool temperature_sensor_calibrated; u8 temperature_sensor_coefficient; u16 temperature_sensor_adc_val; @@ -727,6 +732,15 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev) return ret; } + priv->tsc_regmap = + syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node, + "amlogic,hhi-sysctrl"); + if (IS_ERR(priv->tsc_regmap)) { + dev_err(indio_dev->dev.parent, + "failed to get amlogic,hhi-sysctrl regmap\n"); + return PTR_ERR(priv->tsc_regmap); + } + read_len = MESON_SAR_ADC_EFUSE_BYTES; buf = nvmem_cell_read(temperature_calib, &read_len); if (IS_ERR(buf)) { @@ -861,6 +875,22 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev) priv->temperature_sensor_coefficient); regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10, MESON_SAR_ADC_DELTA_10_TS_C_MASK, regval); + + if (priv->param->temperature_trimming_bits == 5) { + if (priv->temperature_sensor_coefficient & BIT(4)) + regval = MESON_HHI_DPLL_TOP_0_TSC_BIT4; + else + regval = 0; + + /* + * bit [4] (the 5th bit when starting to count at 1) + * of the TSC is located in the HHI register area. + */ + regmap_update_bits(priv->tsc_regmap, + MESON_HHI_DPLL_TOP_0, + MESON_HHI_DPLL_TOP_0_TSC_BIT4, + regval); + } } else { regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10, MESON_SAR_ADC_DELTA_10_TS_REVE1, 0); @@ -1064,6 +1094,9 @@ static const struct meson_sar_adc_param meson_sar_adc_meson8b_param = { .bandgap_reg = MESON_SAR_ADC_DELTA_10, .regmap_config = &meson_sar_adc_regmap_config_meson8, .resolution = 10, + .temperature_trimming_bits = 5, + .temperature_multiplier = 10, + .temperature_divider = 32, }; static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = { diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c new file mode 100644 index 000000000000..9e25bbec9c70 --- /dev/null +++ b/drivers/iio/adc/npcm_adc.c @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019 Nuvoton Technology corporation. + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/mfd/syscon.h> +#include <linux/io.h> +#include <linux/iio/iio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> + +struct npcm_adc { + bool int_status; + u32 adc_sample_hz; + struct device *dev; + void __iomem *regs; + struct clk *adc_clk; + wait_queue_head_t wq; + struct regulator *vref; + struct regmap *rst_regmap; +}; + +/* NPCM7xx reset module */ +#define NPCM7XX_IPSRST1_OFFSET 0x020 +#define NPCM7XX_IPSRST1_ADC_RST BIT(27) + +/* ADC registers */ +#define NPCM_ADCCON 0x00 +#define NPCM_ADCDATA 0x04 + +/* ADCCON Register Bits */ +#define NPCM_ADCCON_ADC_INT_EN BIT(21) +#define NPCM_ADCCON_REFSEL BIT(19) +#define NPCM_ADCCON_ADC_INT_ST BIT(18) +#define NPCM_ADCCON_ADC_EN BIT(17) +#define NPCM_ADCCON_ADC_RST BIT(16) +#define NPCM_ADCCON_ADC_CONV BIT(13) + +#define NPCM_ADCCON_CH_MASK GENMASK(27, 24) +#define NPCM_ADCCON_CH(x) ((x) << 24) +#define NPCM_ADCCON_DIV_SHIFT 1 +#define NPCM_ADCCON_DIV_MASK GENMASK(8, 1) +#define NPCM_ADC_DATA_MASK(x) ((x) & GENMASK(9, 0)) + +#define NPCM_ADC_ENABLE (NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN) + +/* ADC General Definition */ +#define NPCM_RESOLUTION_BITS 10 +#define NPCM_INT_VREF_MV 2000 + +#define NPCM_ADC_CHAN(ch) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = ch, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ +} + +static const struct iio_chan_spec npcm_adc_iio_channels[] = { + NPCM_ADC_CHAN(0), + NPCM_ADC_CHAN(1), + NPCM_ADC_CHAN(2), + NPCM_ADC_CHAN(3), + NPCM_ADC_CHAN(4), + NPCM_ADC_CHAN(5), + NPCM_ADC_CHAN(6), + NPCM_ADC_CHAN(7), +}; + +static irqreturn_t npcm_adc_isr(int irq, void *data) +{ + u32 regtemp; + struct iio_dev *indio_dev = data; + struct npcm_adc *info = iio_priv(indio_dev); + + regtemp = ioread32(info->regs + NPCM_ADCCON); + if (regtemp & NPCM_ADCCON_ADC_INT_ST) { + iowrite32(regtemp, info->regs + NPCM_ADCCON); + wake_up_interruptible(&info->wq); + info->int_status = true; + } + + return IRQ_HANDLED; +} + +static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel) +{ + int ret; + u32 regtemp; + + /* Select ADC channel */ + regtemp = ioread32(info->regs + NPCM_ADCCON); + regtemp &= ~NPCM_ADCCON_CH_MASK; + info->int_status = false; + iowrite32(regtemp | NPCM_ADCCON_CH(channel) | + NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); + + ret = wait_event_interruptible_timeout(info->wq, info->int_status, + msecs_to_jiffies(10)); + if (ret == 0) { + regtemp = ioread32(info->regs + NPCM_ADCCON); + if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) { + /* if conversion failed - reset ADC module */ + regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, + NPCM7XX_IPSRST1_ADC_RST); + msleep(100); + regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET, + 0x0); + msleep(100); + + /* Enable ADC and start conversion module */ + iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV, + info->regs + NPCM_ADCCON); + dev_err(info->dev, "RESET ADC Complete\n"); + } + return -ETIMEDOUT; + } + if (ret < 0) + return ret; + + *val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA)); + + return 0; +} + +static int npcm_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + int ret; + int vref_uv; + struct npcm_adc *info = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&indio_dev->mlock); + ret = npcm_adc_read(info, val, chan->channel); + mutex_unlock(&indio_dev->mlock); + if (ret) { + dev_err(info->dev, "NPCM ADC read failed\n"); + return ret; + } + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + if (info->vref) { + vref_uv = regulator_get_voltage(info->vref); + *val = vref_uv / 1000; + } else { + *val = NPCM_INT_VREF_MV; + } + *val2 = NPCM_RESOLUTION_BITS; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = info->adc_sample_hz; + return IIO_VAL_INT; + default: + return -EINVAL; + } + + return 0; +} + +static const struct iio_info npcm_adc_iio_info = { + .read_raw = &npcm_adc_read_raw, +}; + +static const struct of_device_id npcm_adc_match[] = { + { .compatible = "nuvoton,npcm750-adc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, npcm_adc_match); + +static int npcm_adc_probe(struct platform_device *pdev) +{ + int ret; + int irq; + u32 div; + u32 reg_con; + struct resource *res; + struct npcm_adc *info; + struct iio_dev *indio_dev; + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + info = iio_priv(indio_dev); + + info->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + info->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(info->regs)) + return PTR_ERR(info->regs); + + info->adc_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(info->adc_clk)) { + dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n"); + return PTR_ERR(info->adc_clk); + } + + /* calculate ADC clock sample rate */ + reg_con = ioread32(info->regs + NPCM_ADCCON); + div = reg_con & NPCM_ADCCON_DIV_MASK; + div = div >> NPCM_ADCCON_DIV_SHIFT; + info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2); + + if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) { + info->rst_regmap = syscon_regmap_lookup_by_compatible + ("nuvoton,npcm750-rst"); + if (IS_ERR(info->rst_regmap)) { + dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n"); + ret = PTR_ERR(info->rst_regmap); + goto err_disable_clk; + } + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(dev, "failed getting interrupt resource\n"); + ret = -EINVAL; + goto err_disable_clk; + } + + ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0, + "NPCM_ADC", indio_dev); + if (ret < 0) { + dev_err(dev, "failed requesting interrupt\n"); + goto err_disable_clk; + } + + reg_con = ioread32(info->regs + NPCM_ADCCON); + info->vref = devm_regulator_get_optional(&pdev->dev, "vref"); + if (!IS_ERR(info->vref)) { + ret = regulator_enable(info->vref); + if (ret) { + dev_err(&pdev->dev, "Can't enable ADC reference voltage\n"); + goto err_disable_clk; + } + + iowrite32(reg_con & ~NPCM_ADCCON_REFSEL, + info->regs + NPCM_ADCCON); + } else { + /* + * Any error which is not ENODEV indicates the regulator + * has been specified and so is a failure case. + */ + if (PTR_ERR(info->vref) != -ENODEV) { + ret = PTR_ERR(info->vref); + goto err_disable_clk; + } + + /* Use internal reference */ + iowrite32(reg_con | NPCM_ADCCON_REFSEL, + info->regs + NPCM_ADCCON); + } + + init_waitqueue_head(&info->wq); + + reg_con = ioread32(info->regs + NPCM_ADCCON); + reg_con |= NPCM_ADC_ENABLE; + + /* Enable the ADC Module */ + iowrite32(reg_con, info->regs + NPCM_ADCCON); + + /* Start ADC conversion */ + iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON); + + platform_set_drvdata(pdev, indio_dev); + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &npcm_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = npcm_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "Couldn't register the device.\n"); + goto err_iio_register; + } + + pr_info("NPCM ADC driver probed\n"); + + return 0; + +err_iio_register: + iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); + if (!IS_ERR(info->vref)) + regulator_disable(info->vref); +err_disable_clk: + clk_disable_unprepare(info->adc_clk); + + return ret; +} + +static int npcm_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct npcm_adc *info = iio_priv(indio_dev); + u32 regtemp; + + iio_device_unregister(indio_dev); + + regtemp = ioread32(info->regs + NPCM_ADCCON); + iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON); + if (!IS_ERR(info->vref)) + regulator_disable(info->vref); + clk_disable_unprepare(info->adc_clk); + + return 0; +} + +static struct platform_driver npcm_adc_driver = { + .probe = npcm_adc_probe, + .remove = npcm_adc_remove, + .driver = { + .name = "npcm_adc", + .of_match_table = npcm_adc_match, + }, +}; + +module_platform_driver(npcm_adc_driver); + +MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver"); +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index c30c002f1fef..4735f8a1ca9d 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -423,18 +423,14 @@ static irqreturn_t pm8xxx_eoc_irq(int irq, void *d) static struct pm8xxx_chan_info * pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan) { - struct pm8xxx_chan_info *ch; int i; for (i = 0; i < adc->nchans; i++) { - ch = &adc->chans[i]; + struct pm8xxx_chan_info *ch = &adc->chans[i]; if (ch->hwchan->amux_channel == chan) - break; + return ch; } - if (i == adc->nchans) - return NULL; - - return ch; + return NULL; } static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc, diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c new file mode 100644 index 000000000000..37f4b74a5d32 --- /dev/null +++ b/drivers/iio/adc/stmpe-adc.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STMPE811 IIO ADC Driver + * + * 4 channel, 10/12-bit ADC + * + * Copyright (C) 2013-2018 Toradex AG <stefan.agner@toradex.com> + */ + +#include <linux/completion.h> +#include <linux/err.h> +#include <linux/iio/iio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/stmpe.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/device.h> + +#define STMPE_REG_INT_STA 0x0B +#define STMPE_REG_ADC_INT_EN 0x0E +#define STMPE_REG_ADC_INT_STA 0x0F + +#define STMPE_REG_ADC_CTRL1 0x20 +#define STMPE_REG_ADC_CTRL2 0x21 +#define STMPE_REG_ADC_CAPT 0x22 +#define STMPE_REG_ADC_DATA_CH(channel) (0x30 + 2 * (channel)) + +#define STMPE_REG_TEMP_CTRL 0x60 +#define STMPE_TEMP_CTRL_ENABLE BIT(0) +#define STMPE_TEMP_CTRL_ACQ BIT(1) +#define STMPE_TEMP_CTRL_THRES_EN BIT(3) +#define STMPE_START_ONE_TEMP_CONV (STMPE_TEMP_CTRL_ENABLE | \ + STMPE_TEMP_CTRL_ACQ | \ + STMPE_TEMP_CTRL_THRES_EN) +#define STMPE_REG_TEMP_DATA 0x61 +#define STMPE_REG_TEMP_TH 0x63 +#define STMPE_ADC_LAST_NR 7 +#define STMPE_TEMP_CHANNEL (STMPE_ADC_LAST_NR + 1) + +#define STMPE_ADC_CH(channel) ((1 << (channel)) & 0xff) + +#define STMPE_ADC_TIMEOUT msecs_to_jiffies(1000) + +struct stmpe_adc { + struct stmpe *stmpe; + struct clk *clk; + struct device *dev; + struct mutex lock; + + /* We are allocating plus one for the temperature channel */ + struct iio_chan_spec stmpe_adc_iio_channels[STMPE_ADC_LAST_NR + 2]; + + struct completion completion; + + u8 channel; + u32 value; +}; + +static int stmpe_read_voltage(struct stmpe_adc *info, + struct iio_chan_spec const *chan, int *val) +{ + long ret; + + mutex_lock(&info->lock); + + info->channel = (u8)chan->channel; + + if (info->channel > STMPE_ADC_LAST_NR) { + mutex_unlock(&info->lock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, + STMPE_ADC_CH(info->channel)); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT, + STMPE_ADC_CH(info->channel)); + + *val = info->value; + + ret = wait_for_completion_interruptible_timeout + (&info->completion, STMPE_ADC_TIMEOUT); + + if (ret <= 0) { + mutex_unlock(&info->lock); + if (ret == 0) + return -ETIMEDOUT; + else + return ret; + } + + *val = info->value; + + mutex_unlock(&info->lock); + + return 0; +} + +static int stmpe_read_temp(struct stmpe_adc *info, + struct iio_chan_spec const *chan, int *val) +{ + long ret; + + mutex_lock(&info->lock); + + info->channel = (u8)chan->channel; + + if (info->channel != STMPE_TEMP_CHANNEL) { + mutex_unlock(&info->lock); + return -EINVAL; + } + + stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL, + STMPE_START_ONE_TEMP_CONV); + + ret = wait_for_completion_interruptible_timeout + (&info->completion, STMPE_ADC_TIMEOUT); + + if (ret <= 0) { + mutex_unlock(&info->lock); + if (ret == 0) + return -ETIMEDOUT; + else + return ret; + } + + /* + * absolute temp = +V3.3 * value /7.51 [K] + * scale to [milli °C] + */ + *val = ((449960l * info->value) / 1024l) - 273150; + + mutex_unlock(&info->lock); + + return 0; +} + +static int stmpe_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct stmpe_adc *info = iio_priv(indio_dev); + long ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + + switch (chan->type) { + case IIO_VOLTAGE: + ret = stmpe_read_voltage(info, chan, val); + break; + + case IIO_TEMP: + ret = stmpe_read_temp(info, chan, val); + break; + default: + return -EINVAL; + } + + if (ret < 0) + return ret; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 3300; + *val2 = info->stmpe->mod_12b ? 12 : 10; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + break; + } + + return -EINVAL; +} + +static irqreturn_t stmpe_adc_isr(int irq, void *dev_id) +{ + struct stmpe_adc *info = (struct stmpe_adc *)dev_id; + u16 data; + + if (info->channel > STMPE_TEMP_CHANNEL) + return IRQ_NONE; + + if (info->channel <= STMPE_ADC_LAST_NR) { + int int_sta; + + int_sta = stmpe_reg_read(info->stmpe, STMPE_REG_ADC_INT_STA); + + /* Is the interrupt relevant */ + if (!(int_sta & STMPE_ADC_CH(info->channel))) + return IRQ_NONE; + + /* Read value */ + stmpe_block_read(info->stmpe, + STMPE_REG_ADC_DATA_CH(info->channel), 2, (u8 *) &data); + + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, int_sta); + } else if (info->channel == STMPE_TEMP_CHANNEL) { + /* Read value */ + stmpe_block_read(info->stmpe, STMPE_REG_TEMP_DATA, 2, + (u8 *) &data); + } + + info->value = (u32) be16_to_cpu(data); + complete(&info->completion); + + return IRQ_HANDLED; +} + +static const struct iio_info stmpe_adc_iio_info = { + .read_raw = &stmpe_read_raw, +}; + +static void stmpe_adc_voltage_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_VOLTAGE; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + ics->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); + ics->indexed = 1; + ics->channel = chan; +} + +static void stmpe_adc_temp_chan(struct iio_chan_spec *ics, int chan) +{ + ics->type = IIO_TEMP; + ics->info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED); + ics->indexed = 1; + ics->channel = chan; +} + +static int stmpe_adc_init_hw(struct stmpe_adc *adc) +{ + int ret; + struct stmpe *stmpe = adc->stmpe; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_ADC); + if (ret) { + dev_err(stmpe->dev, "Could not enable clock for ADC\n"); + return ret; + } + + ret = stmpe811_adc_common_init(stmpe); + if (ret) { + stmpe_disable(stmpe, STMPE_BLOCK_ADC); + return ret; + } + + /* use temp irq for each conversion completion */ + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH, 0); + stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH + 1, 0); + + return 0; +} + +static int stmpe_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct stmpe_adc *info; + struct device_node *np; + u32 norequest_mask = 0; + int irq_temp, irq_adc; + int num_chan = 0; + int i = 0; + int ret; + + irq_adc = platform_get_irq_byname(pdev, "STMPE_ADC"); + if (irq_adc < 0) + return irq_adc; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct stmpe_adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + info = iio_priv(indio_dev); + mutex_init(&info->lock); + + init_completion(&info->completion); + ret = devm_request_threaded_irq(&pdev->dev, irq_adc, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) { + dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", + irq_adc); + return ret; + } + + irq_temp = platform_get_irq_byname(pdev, "STMPE_TEMP_SENS"); + if (irq_temp >= 0) { + ret = devm_request_threaded_irq(&pdev->dev, irq_temp, NULL, + stmpe_adc_isr, IRQF_ONESHOT, + "stmpe-adc", info); + if (ret < 0) + dev_warn(&pdev->dev, "failed requesting irq for" + " temp sensor, irq = %d\n", irq_temp); + } + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = dev_name(&pdev->dev); + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &stmpe_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + info->stmpe = dev_get_drvdata(pdev->dev.parent); + + np = pdev->dev.of_node; + + if (!np) + dev_err(&pdev->dev, "no device tree node found\n"); + + of_property_read_u32(np, "st,norequest-mask", &norequest_mask); + + for_each_clear_bit(i, (unsigned long *) &norequest_mask, + (STMPE_ADC_LAST_NR + 1)) { + stmpe_adc_voltage_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + } + stmpe_adc_temp_chan(&info->stmpe_adc_iio_channels[num_chan], i); + num_chan++; + indio_dev->channels = info->stmpe_adc_iio_channels; + indio_dev->num_channels = num_chan; + + ret = stmpe_adc_init_hw(info); + if (ret) + return ret; + + return devm_iio_device_register(&pdev->dev, indio_dev); +} + +static int __maybe_unused stmpe_adc_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct stmpe_adc *info = iio_priv(indio_dev); + + stmpe_adc_init_hw(info); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume); + +static struct platform_driver stmpe_adc_driver = { + .probe = stmpe_adc_probe, + .driver = { + .name = "stmpe-adc", + .pm = &stmpe_adc_pm_ops, + }, +}; + +module_platform_driver(stmpe_adc_driver); + +MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>"); +MODULE_DESCRIPTION("STMPEXXX ADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:stmpe-adc"); diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c new file mode 100644 index 000000000000..53f17e4f2f23 --- /dev/null +++ b/drivers/iio/adc/ti-ads124s08.c @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0 +/* TI ADS124S0X chip family driver + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/sysfs.h> + +/* Commands */ +#define ADS124S08_CMD_NOP 0x00 +#define ADS124S08_CMD_WAKEUP 0x02 +#define ADS124S08_CMD_PWRDWN 0x04 +#define ADS124S08_CMD_RESET 0x06 +#define ADS124S08_CMD_START 0x08 +#define ADS124S08_CMD_STOP 0x0a +#define ADS124S08_CMD_SYOCAL 0x16 +#define ADS124S08_CMD_SYGCAL 0x17 +#define ADS124S08_CMD_SFOCAL 0x19 +#define ADS124S08_CMD_RDATA 0x12 +#define ADS124S08_CMD_RREG 0x20 +#define ADS124S08_CMD_WREG 0x40 + +/* Registers */ +#define ADS124S08_ID_REG 0x00 +#define ADS124S08_STATUS 0x01 +#define ADS124S08_INPUT_MUX 0x02 +#define ADS124S08_PGA 0x03 +#define ADS124S08_DATA_RATE 0x04 +#define ADS124S08_REF 0x05 +#define ADS124S08_IDACMAG 0x06 +#define ADS124S08_IDACMUX 0x07 +#define ADS124S08_VBIAS 0x08 +#define ADS124S08_SYS 0x09 +#define ADS124S08_OFCAL0 0x0a +#define ADS124S08_OFCAL1 0x0b +#define ADS124S08_OFCAL2 0x0c +#define ADS124S08_FSCAL0 0x0d +#define ADS124S08_FSCAL1 0x0e +#define ADS124S08_FSCAL2 0x0f +#define ADS124S08_GPIODAT 0x10 +#define ADS124S08_GPIOCON 0x11 + +/* ADS124S0x common channels */ +#define ADS124S08_AIN0 0x00 +#define ADS124S08_AIN1 0x01 +#define ADS124S08_AIN2 0x02 +#define ADS124S08_AIN3 0x03 +#define ADS124S08_AIN4 0x04 +#define ADS124S08_AIN5 0x05 +#define ADS124S08_AINCOM 0x0c +/* ADS124S08 only channels */ +#define ADS124S08_AIN6 0x06 +#define ADS124S08_AIN7 0x07 +#define ADS124S08_AIN8 0x08 +#define ADS124S08_AIN9 0x09 +#define ADS124S08_AIN10 0x0a +#define ADS124S08_AIN11 0x0b +#define ADS124S08_MAX_CHANNELS 12 + +#define ADS124S08_POS_MUX_SHIFT 0x04 +#define ADS124S08_INT_REF 0x09 + +#define ADS124S08_START_REG_MASK 0x1f +#define ADS124S08_NUM_BYTES_MASK 0x1f + +#define ADS124S08_START_CONV 0x01 +#define ADS124S08_STOP_CONV 0x00 + +enum ads124s_id { + ADS124S08_ID, + ADS124S06_ID, +}; + +struct ads124s_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; +}; + +struct ads124s_private { + const struct ads124s_chip_info *chip_info; + struct gpio_desc *reset_gpio; + struct spi_device *spi; + struct mutex lock; + u8 data[5] ____cacheline_aligned; +}; + +#define ADS124S08_CHAN(index) \ +{ \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .scan_index = index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 32, \ + .storagebits = 32, \ + }, \ +} + +static const struct iio_chan_spec ads124s06_channels[] = { + ADS124S08_CHAN(0), + ADS124S08_CHAN(1), + ADS124S08_CHAN(2), + ADS124S08_CHAN(3), + ADS124S08_CHAN(4), + ADS124S08_CHAN(5), +}; + +static const struct iio_chan_spec ads124s08_channels[] = { + ADS124S08_CHAN(0), + ADS124S08_CHAN(1), + ADS124S08_CHAN(2), + ADS124S08_CHAN(3), + ADS124S08_CHAN(4), + ADS124S08_CHAN(5), + ADS124S08_CHAN(6), + ADS124S08_CHAN(7), + ADS124S08_CHAN(8), + ADS124S08_CHAN(9), + ADS124S08_CHAN(10), + ADS124S08_CHAN(11), +}; + +static const struct ads124s_chip_info ads124s_chip_info_tbl[] = { + [ADS124S08_ID] = { + .channels = ads124s08_channels, + .num_channels = ARRAY_SIZE(ads124s08_channels), + }, + [ADS124S06_ID] = { + .channels = ads124s06_channels, + .num_channels = ARRAY_SIZE(ads124s06_channels), + }, +}; + +static int ads124s_write_cmd(struct iio_dev *indio_dev, u8 command) +{ + struct ads124s_private *priv = iio_priv(indio_dev); + + priv->data[0] = command; + + return spi_write(priv->spi, &priv->data[0], 1); +} + +static int ads124s_write_reg(struct iio_dev *indio_dev, u8 reg, u8 data) +{ + struct ads124s_private *priv = iio_priv(indio_dev); + + priv->data[0] = ADS124S08_CMD_WREG | reg; + priv->data[1] = 0x0; + priv->data[2] = data; + + return spi_write(priv->spi, &priv->data[0], 3); +} + +static int ads124s_reset(struct iio_dev *indio_dev) +{ + struct ads124s_private *priv = iio_priv(indio_dev); + + if (priv->reset_gpio) { + gpiod_set_value(priv->reset_gpio, 0); + udelay(200); + gpiod_set_value(priv->reset_gpio, 1); + } else { + return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET); + } + + return 0; +}; + +static int ads124s_read(struct iio_dev *indio_dev, unsigned int chan) +{ + struct ads124s_private *priv = iio_priv(indio_dev); + int ret; + u32 tmp; + struct spi_transfer t[] = { + { + .tx_buf = &priv->data[0], + .len = 4, + .cs_change = 1, + }, { + .tx_buf = &priv->data[1], + .rx_buf = &priv->data[1], + .len = 4, + }, + }; + + priv->data[0] = ADS124S08_CMD_RDATA; + memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data)); + + ret = spi_sync_transfer(priv->spi, t, ARRAY_SIZE(t)); + if (ret < 0) + return ret; + + tmp = priv->data[2] << 16 | priv->data[3] << 8 | priv->data[4]; + + return tmp; +} + +static int ads124s_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long m) +{ + struct ads124s_private *priv = iio_priv(indio_dev); + int ret; + + mutex_lock(&priv->lock); + switch (m) { + case IIO_CHAN_INFO_RAW: + ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX, + chan->channel); + if (ret) { + dev_err(&priv->spi->dev, "Set ADC CH failed\n"); + goto out; + } + + ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV); + if (ret) { + dev_err(&priv->spi->dev, "Start conversions failed\n"); + goto out; + } + + ret = ads124s_read(indio_dev, chan->channel); + if (ret < 0) { + dev_err(&priv->spi->dev, "Read ADC failed\n"); + goto out; + } + + *val = ret; + + ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV); + if (ret) { + dev_err(&priv->spi->dev, "Stop conversions failed\n"); + goto out; + } + + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } +out: + mutex_unlock(&priv->lock); + return ret; +} + +static const struct iio_info ads124s_info = { + .read_raw = &ads124s_read_raw, +}; + +static irqreturn_t ads124s_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ads124s_private *priv = iio_priv(indio_dev); + u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u16)]; + int scan_index, j = 0; + int ret; + + for_each_set_bit(scan_index, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = ads124s_write_reg(indio_dev, ADS124S08_INPUT_MUX, + scan_index); + if (ret) + dev_err(&priv->spi->dev, "Set ADC CH failed\n"); + + ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV); + if (ret) + dev_err(&priv->spi->dev, "Start ADC conversions failed\n"); + + buffer[j] = ads124s_read(indio_dev, scan_index); + ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV); + if (ret) + dev_err(&priv->spi->dev, "Stop ADC conversions failed\n"); + + j++; + } + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, + pf->timestamp); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int ads124s_probe(struct spi_device *spi) +{ + struct ads124s_private *ads124s_priv; + struct iio_dev *indio_dev; + const struct spi_device_id *spi_id = spi_get_device_id(spi); + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ads124s_priv)); + if (indio_dev == NULL) + return -ENOMEM; + + ads124s_priv = iio_priv(indio_dev); + + ads124s_priv->reset_gpio = devm_gpiod_get_optional(&spi->dev, + "reset", GPIOD_OUT_LOW); + if (IS_ERR(ads124s_priv->reset_gpio)) + dev_info(&spi->dev, "Reset GPIO not defined\n"); + + ads124s_priv->chip_info = &ads124s_chip_info_tbl[spi_id->driver_data]; + + spi_set_drvdata(spi, indio_dev); + + ads124s_priv->spi = spi; + + indio_dev->name = spi_id->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->dev.of_node = spi->dev.of_node; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ads124s_priv->chip_info->channels; + indio_dev->num_channels = ads124s_priv->chip_info->num_channels; + indio_dev->info = &ads124s_info; + + mutex_init(&ads124s_priv->lock); + + ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL, + ads124s_trigger_handler, NULL); + if (ret) { + dev_err(&spi->dev, "iio triggered buffer setup failed\n"); + return ret; + } + + ads124s_reset(indio_dev); + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id ads124s_id[] = { + { "ads124s06", ADS124S06_ID }, + { "ads124s08", ADS124S08_ID }, + { } +}; +MODULE_DEVICE_TABLE(spi, ads124s_id); + +static const struct of_device_id ads124s_of_table[] = { + { .compatible = "ti,ads124s06" }, + { .compatible = "ti,ads124s08" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ads124s_of_table); + +static struct spi_driver ads124s_driver = { + .driver = { + .name = "ads124s08", + .of_match_table = ads124s_of_table, + }, + .probe = ads124s_probe, + .id_table = ads124s_id, +}; +module_spi_driver(ads124s_driver); + +MODULE_AUTHOR("Dan Murphy <dmuprhy@ti.com>"); +MODULE_DESCRIPTION("TI TI_ADS12S0X ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index 3f6be5ac049a..b13c61539d46 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -1273,8 +1273,10 @@ static int xadc_probe(struct platform_device *pdev) xadc->threshold[i] = 0xffff; else xadc->threshold[i] = 0; - xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i), + ret = xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(i), xadc->threshold[i]); + if (ret) + goto err_free_irq; } /* Go to non-buffered mode */ diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index b8e005be4f87..d5d146e9e372 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -61,6 +61,27 @@ config IAQCORE iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) sensors +config PMS7003 + tristate "Plantower PMS7003 particulate matter sensor" + depends on SERIAL_DEV_BUS + help + Say Y here to build support for the Plantower PMS7003 particulate + matter sensor. + + To compile this driver as a module, choose M here: the module will + be called pms7003. + +config SPS30 + tristate "SPS30 particulate matter sensor" + depends on I2C + select CRC8 + help + Say Y here to build support for the Sensirion SPS30 particulate + matter sensor. + + To compile this driver as a module, choose M here: the module will + be called sps30. + config VZ89X tristate "SGX Sensortech MiCS VZ89X VOC sensor" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 2f4c4ba4d781..f5d1365acb49 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -9,4 +9,7 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o obj-$(CONFIG_BME680_SPI) += bme680_spi.o obj-$(CONFIG_CCS811) += ccs811.o obj-$(CONFIG_IAQCORE) += ams-iaq-core.o +obj-$(CONFIG_PMS7003) += pms7003.o +obj-$(CONFIG_SENSIRION_SGP30) += sgp30.o +obj-$(CONFIG_SPS30) += sps30.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c index 06d4be539d2e..b2f805b6b36a 100644 --- a/drivers/iio/chemical/bme680_i2c.c +++ b/drivers/iio/chemical/bme680_i2c.c @@ -70,10 +70,17 @@ static const struct acpi_device_id bme680_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, bme680_acpi_match); +static const struct of_device_id bme680_of_i2c_match[] = { + { .compatible = "bosch,bme680", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bme680_of_i2c_match); + static struct i2c_driver bme680_i2c_driver = { .driver = { .name = "bme680_i2c", .acpi_match_table = ACPI_PTR(bme680_acpi_match), + .of_match_table = bme680_of_i2c_match, }, .probe = bme680_i2c_probe, .id_table = bme680_i2c_id, diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c index c9fb05e8d0b9..d0b7bdd3f066 100644 --- a/drivers/iio/chemical/bme680_spi.c +++ b/drivers/iio/chemical/bme680_spi.c @@ -6,6 +6,7 @@ */ #include <linux/acpi.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/regmap.h> #include <linux/spi/spi.h> @@ -110,10 +111,17 @@ static const struct acpi_device_id bme680_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, bme680_acpi_match); +static const struct of_device_id bme680_of_spi_match[] = { + { .compatible = "bosch,bme680", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bme680_of_spi_match); + static struct spi_driver bme680_spi_driver = { .driver = { .name = "bme680_spi", .acpi_match_table = ACPI_PTR(bme680_acpi_match), + .of_match_table = bme680_of_spi_match, }, .probe = bme680_spi_probe, .id_table = bme680_spi_id, diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c new file mode 100644 index 000000000000..db8e7b2327b3 --- /dev/null +++ b/drivers/iio/chemical/pms7003.c @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Plantower PMS7003 particulate matter sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + */ + +#include <asm/unaligned.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/serdev.h> + +#define PMS7003_DRIVER_NAME "pms7003" + +#define PMS7003_MAGIC 0x424d +/* last 2 data bytes hold frame checksum */ +#define PMS7003_MAX_DATA_LENGTH 28 +#define PMS7003_CHECKSUM_LENGTH 2 +#define PMS7003_PM10_OFFSET 10 +#define PMS7003_PM2P5_OFFSET 8 +#define PMS7003_PM1_OFFSET 6 + +#define PMS7003_TIMEOUT msecs_to_jiffies(6000) +#define PMS7003_CMD_LENGTH 7 +#define PMS7003_PM_MAX 1000 +#define PMS7003_PM_MIN 0 + +enum { + PM1, + PM2P5, + PM10, +}; + +enum pms7003_cmd { + CMD_WAKEUP, + CMD_ENTER_PASSIVE_MODE, + CMD_READ_PASSIVE, + CMD_SLEEP, +}; + +/* + * commands have following format: + * + * +------+------+-----+------+-----+-----------+-----------+ + * | 0x42 | 0x4d | cmd | 0x00 | arg | cksum msb | cksum lsb | + * +------+------+-----+------+-----+-----------+-----------+ + */ +static const u8 pms7003_cmd_tbl[][PMS7003_CMD_LENGTH] = { + [CMD_WAKEUP] = { 0x42, 0x4d, 0xe4, 0x00, 0x01, 0x01, 0x74 }, + [CMD_ENTER_PASSIVE_MODE] = { 0x42, 0x4d, 0xe1, 0x00, 0x00, 0x01, 0x70 }, + [CMD_READ_PASSIVE] = { 0x42, 0x4d, 0xe2, 0x00, 0x00, 0x01, 0x71 }, + [CMD_SLEEP] = { 0x42, 0x4d, 0xe4, 0x00, 0x00, 0x01, 0x73 }, +}; + +struct pms7003_frame { + u8 data[PMS7003_MAX_DATA_LENGTH]; + u16 expected_length; + u16 length; +}; + +struct pms7003_state { + struct serdev_device *serdev; + struct pms7003_frame frame; + struct completion frame_ready; + struct mutex lock; /* must be held whenever state gets touched */ +}; + +static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd) +{ + int ret; + + ret = serdev_device_write(state->serdev, pms7003_cmd_tbl[cmd], + PMS7003_CMD_LENGTH, PMS7003_TIMEOUT); + if (ret < PMS7003_CMD_LENGTH) + return ret < 0 ? ret : -EIO; + + ret = wait_for_completion_interruptible_timeout(&state->frame_ready, + PMS7003_TIMEOUT); + if (!ret) + ret = -ETIMEDOUT; + + return ret < 0 ? ret : 0; +} + +static u16 pms7003_get_pm(const u8 *data) +{ + return clamp_val(get_unaligned_be16(data), + PMS7003_PM_MIN, PMS7003_PM_MAX); +} + +static irqreturn_t pms7003_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + u16 data[3 + 1 + 4]; /* PM1, PM2P5, PM10, padding, timestamp */ + int ret; + + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + goto err; + } + + data[PM1] = pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET); + data[PM2P5] = pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET); + data[PM10] = pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET); + mutex_unlock(&state->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_get_time_ns(indio_dev)); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int pms7003_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + mutex_lock(&state->lock); + ret = pms7003_do_cmd(state, CMD_READ_PASSIVE); + if (ret) { + mutex_unlock(&state->lock); + return ret; + } + + *val = pms7003_get_pm(frame->data + chan->address); + mutex_unlock(&state->lock); + + return IIO_VAL_INT; + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static const struct iio_info pms7003_info = { + .read_raw = pms7003_read_raw, +}; + +#define PMS7003_CHAN(_index, _mod, _addr) { \ + .type = IIO_MASSCONCENTRATION, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .address = _addr, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 10, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec pms7003_channels[] = { + PMS7003_CHAN(0, PM1, PMS7003_PM1_OFFSET), + PMS7003_CHAN(1, PM2P5, PMS7003_PM2P5_OFFSET), + PMS7003_CHAN(2, PM10, PMS7003_PM10_OFFSET), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static u16 pms7003_calc_checksum(struct pms7003_frame *frame) +{ + u16 checksum = (PMS7003_MAGIC >> 8) + (u8)(PMS7003_MAGIC & 0xff) + + (frame->length >> 8) + (u8)frame->length; + int i; + + for (i = 0; i < frame->length - PMS7003_CHECKSUM_LENGTH; i++) + checksum += frame->data[i]; + + return checksum; +} + +static bool pms7003_frame_is_okay(struct pms7003_frame *frame) +{ + int offset = frame->length - PMS7003_CHECKSUM_LENGTH; + u16 checksum = get_unaligned_be16(frame->data + offset); + + return checksum == pms7003_calc_checksum(frame); +} + +static int pms7003_receive_buf(struct serdev_device *serdev, + const unsigned char *buf, size_t size) +{ + struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev); + struct pms7003_state *state = iio_priv(indio_dev); + struct pms7003_frame *frame = &state->frame; + int num; + + if (!frame->expected_length) { + u16 magic; + + /* wait for SOF and data length */ + if (size < 4) + return 0; + + magic = get_unaligned_be16(buf); + if (magic != PMS7003_MAGIC) + return 2; + + num = get_unaligned_be16(buf + 2); + if (num <= PMS7003_MAX_DATA_LENGTH) { + frame->expected_length = num; + frame->length = 0; + } + + return 4; + } + + num = min(size, (size_t)(frame->expected_length - frame->length)); + memcpy(frame->data + frame->length, buf, num); + frame->length += num; + + if (frame->length == frame->expected_length) { + if (pms7003_frame_is_okay(frame)) + complete(&state->frame_ready); + + frame->expected_length = 0; + } + + return num; +} + +static const struct serdev_device_ops pms7003_serdev_ops = { + .receive_buf = pms7003_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +static void pms7003_stop(void *data) +{ + struct pms7003_state *state = data; + + pms7003_do_cmd(state, CMD_SLEEP); +} + +static const unsigned long pms7003_scan_masks[] = { 0x07, 0x00 }; + +static int pms7003_probe(struct serdev_device *serdev) +{ + struct pms7003_state *state; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&serdev->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + serdev_device_set_drvdata(serdev, indio_dev); + state->serdev = serdev; + indio_dev->dev.parent = &serdev->dev; + indio_dev->info = &pms7003_info; + indio_dev->name = PMS7003_DRIVER_NAME; + indio_dev->channels = pms7003_channels, + indio_dev->num_channels = ARRAY_SIZE(pms7003_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = pms7003_scan_masks; + + mutex_init(&state->lock); + init_completion(&state->frame_ready); + + serdev_device_set_client_ops(serdev, &pms7003_serdev_ops); + ret = devm_serdev_device_open(&serdev->dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, 9600); + serdev_device_set_flow_control(serdev, false); + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return ret; + + ret = pms7003_do_cmd(state, CMD_WAKEUP); + if (ret) { + dev_err(&serdev->dev, "failed to wakeup sensor\n"); + return ret; + } + + ret = pms7003_do_cmd(state, CMD_ENTER_PASSIVE_MODE); + if (ret) { + dev_err(&serdev->dev, "failed to enter passive mode\n"); + return ret; + } + + ret = devm_add_action_or_reset(&serdev->dev, pms7003_stop, state); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(&serdev->dev, indio_dev, NULL, + pms7003_trigger_handler, NULL); + if (ret) + return ret; + + return devm_iio_device_register(&serdev->dev, indio_dev); +} + +static const struct of_device_id pms7003_of_match[] = { + { .compatible = "plantower,pms7003" }, + { } +}; +MODULE_DEVICE_TABLE(of, pms7003_of_match); + +static struct serdev_device_driver pms7003_driver = { + .driver = { + .name = PMS7003_DRIVER_NAME, + .of_match_table = pms7003_of_match, + }, + .probe = pms7003_probe, +}; +module_serdev_device_driver(pms7003_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("Plantower PMS7003 particulate matter sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c new file mode 100644 index 000000000000..8cc8fe5e356d --- /dev/null +++ b/drivers/iio/chemical/sgp30.c @@ -0,0 +1,591 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * sgp30.c - Support for Sensirion SGP Gas Sensors + * + * Copyright (C) 2018 Andreas Brauchli <andreas.brauchli@sensirion.com> + * + * I2C slave address: 0x58 + * + * Datasheets: + * https://www.sensirion.com/file/datasheet_sgp30 + * https://www.sensirion.com/file/datasheet_sgpc3 + * + * TODO: + * - baseline support + * - humidity compensation + * - power mode switching (SGPC3) + */ + +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/of_device.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define SGP_WORD_LEN 2 +#define SGP_CRC8_POLYNOMIAL 0x31 +#define SGP_CRC8_INIT 0xff +#define SGP_CRC8_LEN 1 +#define SGP_CMD(cmd_word) cpu_to_be16(cmd_word) +#define SGP_CMD_DURATION_US 12000 +#define SGP_MEASUREMENT_DURATION_US 50000 +#define SGP_CMD_LEN SGP_WORD_LEN +#define SGP_CMD_MAX_BUF_SIZE (SGP_CMD_LEN + 2 * SGP_WORD_LEN) +#define SGP_MEASUREMENT_LEN 2 +#define SGP30_MEASURE_INTERVAL_HZ 1 +#define SGPC3_MEASURE_INTERVAL_HZ 2 +#define SGP_VERS_PRODUCT(data) ((((data)->feature_set) & 0xf000) >> 12) +#define SGP_VERS_RESERVED(data) ((((data)->feature_set) & 0x0800) >> 11) +#define SGP_VERS_GEN(data) ((((data)->feature_set) & 0x0600) >> 9) +#define SGP_VERS_ENG_BIT(data) ((((data)->feature_set) & 0x0100) >> 8) +#define SGP_VERS_MAJOR(data) ((((data)->feature_set) & 0x00e0) >> 5) +#define SGP_VERS_MINOR(data) (((data)->feature_set) & 0x001f) + +DECLARE_CRC8_TABLE(sgp_crc8_table); + +enum sgp_product_id { + SGP30 = 0, + SGPC3, +}; + +enum sgp30_channel_idx { + SGP30_IAQ_TVOC_IDX = 0, + SGP30_IAQ_CO2EQ_IDX, + SGP30_SIG_ETOH_IDX, + SGP30_SIG_H2_IDX, +}; + +enum sgpc3_channel_idx { + SGPC3_IAQ_TVOC_IDX = 10, + SGPC3_SIG_ETOH_IDX, +}; + +enum sgp_cmd { + SGP_CMD_IAQ_INIT = SGP_CMD(0x2003), + SGP_CMD_IAQ_MEASURE = SGP_CMD(0x2008), + SGP_CMD_GET_FEATURE_SET = SGP_CMD(0x202f), + SGP_CMD_GET_SERIAL_ID = SGP_CMD(0x3682), + + SGP30_CMD_MEASURE_SIGNAL = SGP_CMD(0x2050), + + SGPC3_CMD_MEASURE_RAW = SGP_CMD(0x2046), +}; + +struct sgp_version { + u8 major; + u8 minor; +}; + +struct sgp_crc_word { + __be16 value; + u8 crc8; +} __attribute__((__packed__)); + +union sgp_reading { + u8 start; + struct sgp_crc_word raw_words[4]; +}; + +enum _iaq_buffer_state { + IAQ_BUFFER_EMPTY = 0, + IAQ_BUFFER_DEFAULT_VALS, + IAQ_BUFFER_VALID, +}; + +struct sgp_data { + struct i2c_client *client; + struct task_struct *iaq_thread; + struct mutex data_lock; + unsigned long iaq_init_start_jiffies; + unsigned long iaq_defval_skip_jiffies; + u16 product_id; + u16 feature_set; + unsigned long measure_interval_jiffies; + enum sgp_cmd iaq_init_cmd; + enum sgp_cmd measure_iaq_cmd; + enum sgp_cmd measure_gas_signals_cmd; + union sgp_reading buffer; + union sgp_reading iaq_buffer; + enum _iaq_buffer_state iaq_buffer_state; +}; + +struct sgp_device { + const struct iio_chan_spec *channels; + int num_channels; +}; + +static const struct sgp_version supported_versions_sgp30[] = { + { + .major = 1, + .minor = 0, + }, +}; + +static const struct sgp_version supported_versions_sgpc3[] = { + { + .major = 0, + .minor = 4, + }, +}; + +static const struct iio_chan_spec sgp30_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = SGP30_IAQ_TVOC_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = SGP30_IAQ_CO2EQ_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_ETHANOL, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = SGP30_SIG_ETOH_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_H2, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = SGP30_SIG_H2_IDX, + }, +}; + +static const struct iio_chan_spec sgpc3_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .address = SGPC3_IAQ_TVOC_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_ETHANOL, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = SGPC3_SIG_ETOH_IDX, + }, +}; + +static const struct sgp_device sgp_devices[] = { + [SGP30] = { + .channels = sgp30_channels, + .num_channels = ARRAY_SIZE(sgp30_channels), + }, + [SGPC3] = { + .channels = sgpc3_channels, + .num_channels = ARRAY_SIZE(sgpc3_channels), + }, +}; + +/** + * sgp_verify_buffer() - verify the checksums of the data buffer words + * + * @data: SGP data + * @buf: Raw data buffer + * @word_count: Num data words stored in the buffer, excluding CRC bytes + * + * Return: 0 on success, negative error otherwise. + */ +static int sgp_verify_buffer(const struct sgp_data *data, + union sgp_reading *buf, size_t word_count) +{ + size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN); + int i; + u8 crc; + u8 *data_buf = &buf->start; + + for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) { + crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN, + SGP_CRC8_INIT); + if (crc != data_buf[i + SGP_WORD_LEN]) { + dev_err(&data->client->dev, "CRC error\n"); + return -EIO; + } + } + + return 0; +} + +/** + * sgp_read_cmd() - reads data from sensor after issuing a command + * The caller must hold data->data_lock for the duration of the call. + * @data: SGP data + * @cmd: SGP Command to issue + * @buf: Raw data buffer to use + * @word_count: Num words to read, excluding CRC bytes + * + * Return: 0 on success, negative error otherwise. + */ +static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd, + union sgp_reading *buf, size_t word_count, + unsigned long duration_us) +{ + int ret; + struct i2c_client *client = data->client; + size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN); + u8 *data_buf; + + ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN); + if (ret != SGP_CMD_LEN) + return -EIO; + usleep_range(duration_us, duration_us + 1000); + + if (word_count == 0) + return 0; + + data_buf = &buf->start; + ret = i2c_master_recv(client, data_buf, size); + if (ret < 0) + return ret; + if (ret != size) + return -EIO; + + return sgp_verify_buffer(data, buf, word_count); +} + +/** + * sgp_measure_iaq() - measure and retrieve IAQ values from sensor + * The caller must hold data->data_lock for the duration of the call. + * @data: SGP data + * + * Return: 0 on success, -EBUSY on default values, negative error + * otherwise. + */ + +static int sgp_measure_iaq(struct sgp_data *data) +{ + int ret; + /* data contains default values */ + bool default_vals = !time_after(jiffies, data->iaq_init_start_jiffies + + data->iaq_defval_skip_jiffies); + + ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data->iaq_buffer, + SGP_MEASUREMENT_LEN, SGP_MEASUREMENT_DURATION_US); + if (ret < 0) + return ret; + + data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS; + + if (default_vals) + return -EBUSY; + + data->iaq_buffer_state = IAQ_BUFFER_VALID; + + return 0; +} + +static void sgp_iaq_thread_sleep_until(const struct sgp_data *data, + unsigned long sleep_jiffies) +{ + const long IAQ_POLL = 50000; + + while (!time_after(jiffies, sleep_jiffies)) { + usleep_range(IAQ_POLL, IAQ_POLL + 10000); + if (kthread_should_stop() || data->iaq_init_start_jiffies == 0) + return; + } +} + +static int sgp_iaq_threadfn(void *p) +{ + struct sgp_data *data = (struct sgp_data *)p; + unsigned long next_update_jiffies; + int ret; + + while (!kthread_should_stop()) { + mutex_lock(&data->data_lock); + if (data->iaq_init_start_jiffies == 0) { + ret = sgp_read_cmd(data, data->iaq_init_cmd, NULL, 0, + SGP_CMD_DURATION_US); + if (ret < 0) + goto unlock_sleep_continue; + data->iaq_init_start_jiffies = jiffies; + } + + ret = sgp_measure_iaq(data); + if (ret && ret != -EBUSY) { + dev_warn(&data->client->dev, + "IAQ measurement error [%d]\n", ret); + } +unlock_sleep_continue: + next_update_jiffies = jiffies + data->measure_interval_jiffies; + mutex_unlock(&data->data_lock); + sgp_iaq_thread_sleep_until(data, next_update_jiffies); + } + + return 0; +} + +static int sgp_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct sgp_data *data = iio_priv(indio_dev); + struct sgp_crc_word *words; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + mutex_lock(&data->data_lock); + if (data->iaq_buffer_state != IAQ_BUFFER_VALID) { + mutex_unlock(&data->data_lock); + return -EBUSY; + } + words = data->iaq_buffer.raw_words; + switch (chan->address) { + case SGP30_IAQ_TVOC_IDX: + case SGPC3_IAQ_TVOC_IDX: + *val = 0; + *val2 = be16_to_cpu(words[1].value); + ret = IIO_VAL_INT_PLUS_NANO; + break; + case SGP30_IAQ_CO2EQ_IDX: + *val = 0; + *val2 = be16_to_cpu(words[0].value); + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->data_lock); + break; + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->data_lock); + if (chan->address == SGPC3_SIG_ETOH_IDX) { + if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY) + ret = -EBUSY; + else + ret = 0; + words = data->iaq_buffer.raw_words; + } else { + ret = sgp_read_cmd(data, data->measure_gas_signals_cmd, + &data->buffer, SGP_MEASUREMENT_LEN, + SGP_MEASUREMENT_DURATION_US); + words = data->buffer.raw_words; + } + if (ret) { + mutex_unlock(&data->data_lock); + return ret; + } + + switch (chan->address) { + case SGP30_SIG_ETOH_IDX: + *val = be16_to_cpu(words[1].value); + ret = IIO_VAL_INT; + break; + case SGPC3_SIG_ETOH_IDX: + case SGP30_SIG_H2_IDX: + *val = be16_to_cpu(words[0].value); + ret = IIO_VAL_INT; + break; + default: + ret = -EINVAL; + break; + } + mutex_unlock(&data->data_lock); + break; + default: + return -EINVAL; + } + + return ret; +} + +static int sgp_check_compat(struct sgp_data *data, + unsigned int product_id) +{ + const struct sgp_version *supported_versions; + u16 ix, num_fs; + u16 product, generation, major, minor; + + /* driver does not match product */ + generation = SGP_VERS_GEN(data); + if (generation != 0) { + dev_err(&data->client->dev, + "incompatible product generation %d != 0", generation); + return -ENODEV; + } + + product = SGP_VERS_PRODUCT(data); + if (product != product_id) { + dev_err(&data->client->dev, + "sensor reports a different product: 0x%04hx\n", + product); + return -ENODEV; + } + + if (SGP_VERS_RESERVED(data)) + dev_warn(&data->client->dev, "reserved bit is set\n"); + + /* engineering samples are not supported: no interface guarantees */ + if (SGP_VERS_ENG_BIT(data)) + return -ENODEV; + + switch (product) { + case SGP30: + supported_versions = supported_versions_sgp30; + num_fs = ARRAY_SIZE(supported_versions_sgp30); + break; + case SGPC3: + supported_versions = supported_versions_sgpc3; + num_fs = ARRAY_SIZE(supported_versions_sgpc3); + break; + default: + return -ENODEV; + } + + major = SGP_VERS_MAJOR(data); + minor = SGP_VERS_MINOR(data); + for (ix = 0; ix < num_fs; ix++) { + if (major == supported_versions[ix].major && + minor >= supported_versions[ix].minor) + return 0; + } + dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n", + major, minor); + + return -ENODEV; +} + +static void sgp_init(struct sgp_data *data) +{ + data->iaq_init_cmd = SGP_CMD_IAQ_INIT; + data->iaq_init_start_jiffies = 0; + data->iaq_buffer_state = IAQ_BUFFER_EMPTY; + switch (SGP_VERS_PRODUCT(data)) { + case SGP30: + data->measure_interval_jiffies = SGP30_MEASURE_INTERVAL_HZ * HZ; + data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE; + data->measure_gas_signals_cmd = SGP30_CMD_MEASURE_SIGNAL; + data->product_id = SGP30; + data->iaq_defval_skip_jiffies = 15 * HZ; + break; + case SGPC3: + data->measure_interval_jiffies = SGPC3_MEASURE_INTERVAL_HZ * HZ; + data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW; + data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW; + data->product_id = SGPC3; + data->iaq_defval_skip_jiffies = + 43 * data->measure_interval_jiffies; + break; + }; +} + +static const struct iio_info sgp_info = { + .read_raw = sgp_read_raw, +}; + +static const struct of_device_id sgp_dt_ids[] = { + { .compatible = "sensirion,sgp30", .data = (void *)SGP30 }, + { .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 }, + { } +}; + +static int sgp_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct sgp_data *data; + const struct of_device_id *of_id; + unsigned long product_id; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + of_id = of_match_device(sgp_dt_ids, &client->dev); + if (of_id) + product_id = (unsigned long)of_id->data; + else + product_id = id->driver_data; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL); + mutex_init(&data->data_lock); + + /* get feature set version and write it to client data */ + ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data->buffer, 1, + SGP_CMD_DURATION_US); + if (ret < 0) + return ret; + + data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value); + + ret = sgp_check_compat(data, product_id); + if (ret) + return ret; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &sgp_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = sgp_devices[product_id].channels; + indio_dev->num_channels = sgp_devices[product_id].num_channels; + + sgp_init(data); + + ret = devm_iio_device_register(&client->dev, indio_dev); + if (ret) { + dev_err(&client->dev, "failed to register iio device\n"); + return ret; + } + + data->iaq_thread = kthread_run(sgp_iaq_threadfn, data, + "%s-iaq", data->client->name); + + return 0; +} + +static int sgp_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct sgp_data *data = iio_priv(indio_dev); + + if (data->iaq_thread) + kthread_stop(data->iaq_thread); + + return 0; +} + +static const struct i2c_device_id sgp_id[] = { + { "sgp30", SGP30 }, + { "sgpc3", SGPC3 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, sgp_id); +MODULE_DEVICE_TABLE(of, sgp_dt_ids); + +static struct i2c_driver sgp_driver = { + .driver = { + .name = "sgp30", + .of_match_table = of_match_ptr(sgp_dt_ids), + }, + .probe = sgp_probe, + .remove = sgp_remove, + .id_table = sgp_id, +}; +module_i2c_driver(sgp_driver); + +MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>"); +MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>"); +MODULE_DESCRIPTION("Sensirion SGP gas sensors"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c new file mode 100644 index 000000000000..edbb956e81e8 --- /dev/null +++ b/drivers/iio/chemical/sps30.c @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Sensirion SPS30 particulate matter sensor driver + * + * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com> + * + * I2C slave address: 0x69 + */ + +#include <asm/unaligned.h> +#include <linux/crc8.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#define SPS30_CRC8_POLYNOMIAL 0x31 +/* max number of bytes needed to store PM measurements or serial string */ +#define SPS30_MAX_READ_SIZE 48 +/* sensor measures reliably up to 3000 ug / m3 */ +#define SPS30_MAX_PM 3000 +/* minimum and maximum self cleaning periods in seconds */ +#define SPS30_AUTO_CLEANING_PERIOD_MIN 0 +#define SPS30_AUTO_CLEANING_PERIOD_MAX 604800 + +/* SPS30 commands */ +#define SPS30_START_MEAS 0x0010 +#define SPS30_STOP_MEAS 0x0104 +#define SPS30_RESET 0xd304 +#define SPS30_READ_DATA_READY_FLAG 0x0202 +#define SPS30_READ_DATA 0x0300 +#define SPS30_READ_SERIAL 0xd033 +#define SPS30_START_FAN_CLEANING 0x5607 +#define SPS30_AUTO_CLEANING_PERIOD 0x8004 +/* not a sensor command per se, used only to distinguish write from read */ +#define SPS30_READ_AUTO_CLEANING_PERIOD 0x8005 + +enum { + PM1, + PM2P5, + PM4, + PM10, +}; + +enum { + RESET, + MEASURING, +}; + +struct sps30_state { + struct i2c_client *client; + /* + * Guards against concurrent access to sensor registers. + * Must be held whenever sequence of commands is to be executed. + */ + struct mutex lock; + int state; +}; + +DECLARE_CRC8_TABLE(sps30_crc8_table); + +static int sps30_write_then_read(struct sps30_state *state, u8 *txbuf, + int txsize, u8 *rxbuf, int rxsize) +{ + int ret; + + /* + * Sensor does not support repeated start so instead of + * sending two i2c messages in a row we just send one by one. + */ + ret = i2c_master_send(state->client, txbuf, txsize); + if (ret != txsize) + return ret < 0 ? ret : -EIO; + + if (!rxbuf) + return 0; + + ret = i2c_master_recv(state->client, rxbuf, rxsize); + if (ret != rxsize) + return ret < 0 ? ret : -EIO; + + return 0; +} + +static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) +{ + /* + * Internally sensor stores measurements in a following manner: + * + * PM1: upper two bytes, crc8, lower two bytes, crc8 + * PM2P5: upper two bytes, crc8, lower two bytes, crc8 + * PM4: upper two bytes, crc8, lower two bytes, crc8 + * PM10: upper two bytes, crc8, lower two bytes, crc8 + * + * What follows next are number concentration measurements and + * typical particle size measurement which we omit. + */ + u8 buf[SPS30_MAX_READ_SIZE] = { cmd >> 8, cmd }; + int i, ret = 0; + + switch (cmd) { + case SPS30_START_MEAS: + buf[2] = 0x03; + buf[3] = 0x00; + buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE); + ret = sps30_write_then_read(state, buf, 5, NULL, 0); + break; + case SPS30_STOP_MEAS: + case SPS30_RESET: + case SPS30_START_FAN_CLEANING: + ret = sps30_write_then_read(state, buf, 2, NULL, 0); + break; + case SPS30_READ_AUTO_CLEANING_PERIOD: + buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8; + buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD; + /* fall through */ + case SPS30_READ_DATA_READY_FLAG: + case SPS30_READ_DATA: + case SPS30_READ_SERIAL: + /* every two data bytes are checksummed */ + size += size / 2; + ret = sps30_write_then_read(state, buf, 2, buf, size); + break; + case SPS30_AUTO_CLEANING_PERIOD: + buf[2] = data[0]; + buf[3] = data[1]; + buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE); + buf[5] = data[2]; + buf[6] = data[3]; + buf[7] = crc8(sps30_crc8_table, &buf[5], 2, CRC8_INIT_VALUE); + ret = sps30_write_then_read(state, buf, 8, NULL, 0); + break; + } + + if (ret) + return ret; + + /* validate received data and strip off crc bytes */ + for (i = 0; i < size; i += 3) { + u8 crc = crc8(sps30_crc8_table, &buf[i], 2, CRC8_INIT_VALUE); + + if (crc != buf[i + 2]) { + dev_err(&state->client->dev, + "data integrity check failed\n"); + return -EIO; + } + + *data++ = buf[i]; + *data++ = buf[i + 1]; + } + + return 0; +} + +static s32 sps30_float_to_int_clamped(const u8 *fp) +{ + int val = get_unaligned_be32(fp); + int mantissa = val & GENMASK(22, 0); + /* this is fine since passed float is always non-negative */ + int exp = val >> 23; + int fraction, shift; + + /* special case 0 */ + if (!exp && !mantissa) + return 0; + + exp -= 127; + if (exp < 0) { + /* return values ranging from 1 to 99 */ + return ((((1 << 23) + mantissa) * 100) >> 23) >> (-exp); + } + + /* return values ranging from 100 to 300000 */ + shift = 23 - exp; + val = (1 << exp) + (mantissa >> shift); + if (val >= SPS30_MAX_PM) + return SPS30_MAX_PM * 100; + + fraction = mantissa & GENMASK(shift - 1, 0); + + return val * 100 + ((fraction * 100) >> shift); +} + +static int sps30_do_meas(struct sps30_state *state, s32 *data, int size) +{ + int i, ret, tries = 5; + u8 tmp[16]; + + if (state->state == RESET) { + ret = sps30_do_cmd(state, SPS30_START_MEAS, NULL, 0); + if (ret) + return ret; + + state->state = MEASURING; + } + + while (tries--) { + ret = sps30_do_cmd(state, SPS30_READ_DATA_READY_FLAG, tmp, 2); + if (ret) + return -EIO; + + /* new measurements ready to be read */ + if (tmp[1] == 1) + break; + + msleep_interruptible(300); + } + + if (tries == -1) + return -ETIMEDOUT; + + ret = sps30_do_cmd(state, SPS30_READ_DATA, tmp, sizeof(int) * size); + if (ret) + return ret; + + for (i = 0; i < size; i++) + data[i] = sps30_float_to_int_clamped(&tmp[4 * i]); + + return 0; +} + +static irqreturn_t sps30_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct sps30_state *state = iio_priv(indio_dev); + int ret; + s32 data[4 + 2]; /* PM1, PM2P5, PM4, PM10, timestamp */ + + mutex_lock(&state->lock); + ret = sps30_do_meas(state, data, 4); + mutex_unlock(&state->lock); + if (ret) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_get_time_ns(indio_dev)); +err: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int sps30_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct sps30_state *state = iio_priv(indio_dev); + int data[4], ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + mutex_lock(&state->lock); + /* read up to the number of bytes actually needed */ + switch (chan->channel2) { + case IIO_MOD_PM1: + ret = sps30_do_meas(state, data, 1); + break; + case IIO_MOD_PM2P5: + ret = sps30_do_meas(state, data, 2); + break; + case IIO_MOD_PM4: + ret = sps30_do_meas(state, data, 3); + break; + case IIO_MOD_PM10: + ret = sps30_do_meas(state, data, 4); + break; + } + mutex_unlock(&state->lock); + if (ret) + return ret; + + *val = data[chan->address] / 100; + *val2 = (data[chan->address] % 100) * 10000; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_MASSCONCENTRATION: + switch (chan->channel2) { + case IIO_MOD_PM1: + case IIO_MOD_PM2P5: + case IIO_MOD_PM4: + case IIO_MOD_PM10: + *val = 0; + *val2 = 10000; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + default: + return -EINVAL; + } + } + + return -EINVAL; +} + +static int sps30_do_cmd_reset(struct sps30_state *state) +{ + int ret; + + ret = sps30_do_cmd(state, SPS30_RESET, NULL, 0); + msleep(300); + /* + * Power-on-reset causes sensor to produce some glitch on i2c bus and + * some controllers end up in error state. Recover simply by placing + * some data on the bus, for example STOP_MEAS command, which + * is NOP in this case. + */ + sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0); + state->state = RESET; + + return ret; +} + +static ssize_t start_cleaning_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct sps30_state *state = iio_priv(indio_dev); + int val, ret; + + if (kstrtoint(buf, 0, &val) || val != 1) + return -EINVAL; + + mutex_lock(&state->lock); + ret = sps30_do_cmd(state, SPS30_START_FAN_CLEANING, NULL, 0); + mutex_unlock(&state->lock); + if (ret) + return ret; + + return len; +} + +static ssize_t cleaning_period_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct sps30_state *state = iio_priv(indio_dev); + u8 tmp[4]; + int ret; + + mutex_lock(&state->lock); + ret = sps30_do_cmd(state, SPS30_READ_AUTO_CLEANING_PERIOD, tmp, 4); + mutex_unlock(&state->lock); + if (ret) + return ret; + + return sprintf(buf, "%d\n", get_unaligned_be32(tmp)); +} + +static ssize_t cleaning_period_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct sps30_state *state = iio_priv(indio_dev); + int val, ret; + u8 tmp[4]; + + if (kstrtoint(buf, 0, &val)) + return -EINVAL; + + if ((val < SPS30_AUTO_CLEANING_PERIOD_MIN) || + (val > SPS30_AUTO_CLEANING_PERIOD_MAX)) + return -EINVAL; + + put_unaligned_be32(val, tmp); + + mutex_lock(&state->lock); + ret = sps30_do_cmd(state, SPS30_AUTO_CLEANING_PERIOD, tmp, 0); + if (ret) { + mutex_unlock(&state->lock); + return ret; + } + + msleep(20); + + /* + * sensor requires reset in order to return up to date self cleaning + * period + */ + ret = sps30_do_cmd_reset(state); + if (ret) + dev_warn(dev, + "period changed but reads will return the old value\n"); + + mutex_unlock(&state->lock); + + return len; +} + +static ssize_t cleaning_period_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "[%d %d %d]\n", + SPS30_AUTO_CLEANING_PERIOD_MIN, 1, + SPS30_AUTO_CLEANING_PERIOD_MAX); +} + +static IIO_DEVICE_ATTR_WO(start_cleaning, 0); +static IIO_DEVICE_ATTR_RW(cleaning_period, 0); +static IIO_DEVICE_ATTR_RO(cleaning_period_available, 0); + +static struct attribute *sps30_attrs[] = { + &iio_dev_attr_start_cleaning.dev_attr.attr, + &iio_dev_attr_cleaning_period.dev_attr.attr, + &iio_dev_attr_cleaning_period_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group sps30_attr_group = { + .attrs = sps30_attrs, +}; + +static const struct iio_info sps30_info = { + .attrs = &sps30_attr_group, + .read_raw = sps30_read_raw, +}; + +#define SPS30_CHAN(_index, _mod) { \ + .type = IIO_MASSCONCENTRATION, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .address = _mod, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 19, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec sps30_channels[] = { + SPS30_CHAN(0, PM1), + SPS30_CHAN(1, PM2P5), + SPS30_CHAN(2, PM4), + SPS30_CHAN(3, PM10), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static void sps30_stop_meas(void *data) +{ + struct sps30_state *state = data; + + sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0); +} + +static const unsigned long sps30_scan_masks[] = { 0x0f, 0x00 }; + +static int sps30_probe(struct i2c_client *client) +{ + struct iio_dev *indio_dev; + struct sps30_state *state; + u8 buf[32]; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + state = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + state->client = client; + state->state = RESET; + indio_dev->dev.parent = &client->dev; + indio_dev->info = &sps30_info; + indio_dev->name = client->name; + indio_dev->channels = sps30_channels; + indio_dev->num_channels = ARRAY_SIZE(sps30_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->available_scan_masks = sps30_scan_masks; + + mutex_init(&state->lock); + crc8_populate_msb(sps30_crc8_table, SPS30_CRC8_POLYNOMIAL); + + ret = sps30_do_cmd_reset(state); + if (ret) { + dev_err(&client->dev, "failed to reset device\n"); + return ret; + } + + ret = sps30_do_cmd(state, SPS30_READ_SERIAL, buf, sizeof(buf)); + if (ret) { + dev_err(&client->dev, "failed to read serial number\n"); + return ret; + } + /* returned serial number is already NUL terminated */ + dev_info(&client->dev, "serial number: %s\n", buf); + + ret = devm_add_action_or_reset(&client->dev, sps30_stop_meas, state); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, + sps30_trigger_handler, NULL); + if (ret) + return ret; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id sps30_id[] = { + { "sps30" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sps30_id); + +static const struct of_device_id sps30_of_match[] = { + { .compatible = "sensirion,sps30" }, + { } +}; +MODULE_DEVICE_TABLE(of, sps30_of_match); + +static struct i2c_driver sps30_driver = { + .driver = { + .name = "sps30", + .of_match_table = sps30_of_match, + }, + .id_table = sps30_id, + .probe_new = sps30_probe, +}; +module_i2c_driver(sps30_driver); + +MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>"); +MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 851b61eaf3da..fbef9107acad 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -148,9 +148,9 @@ config AD5686_SPI depends on SPI select AD5686 help - Say yes here to build support for Analog Devices AD5672R, AD5676, - AD5676R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, AD5686R. - Voltage Output Digital to Analog Converter. + Say yes here to build support for Analog Devices AD5672R, AD5674R, + AD5676, AD5676R, AD5679R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, + AD5686R Voltage Output Digital to Analog Converter. To compile this driver as a module, choose M here: the module will be called ad5686. @@ -375,6 +375,16 @@ config TI_DAC7311 If compiled as a module, it will be called ti-dac7311. +config TI_DAC7612 + tristate "Texas Instruments 12-bit 2-channel DAC driver" + depends on SPI_MASTER && GPIOLIB + help + Driver for the Texas Instruments DAC7612, DAC7612U, DAC7612UB + The driver hand drive the load pin automatically, otherwise + it needs to be toggled manually. + + If compiled as a module, it will be called ti-dac7612. + config VF610_DAC tristate "Vybrid vf610 DAC driver" depends on OF diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index f0a37c93de8e..1369fa1d2f0e 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -41,4 +41,5 @@ obj-$(CONFIG_STM32_DAC) += stm32-dac.o obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o +obj-$(CONFIG_TI_DAC7612) += ti-dac7612.o obj-$(CONFIG_VF610_DAC) += vf610_dac.o diff --git a/drivers/iio/dac/ad5686-spi.c b/drivers/iio/dac/ad5686-spi.c index 665fa6bd9ced..0188ded5137c 100644 --- a/drivers/iio/dac/ad5686-spi.c +++ b/drivers/iio/dac/ad5686-spi.c @@ -1,7 +1,8 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* - * AD5672R, AD5676, AD5676R, AD5681R, AD5682R, AD5683, AD5683R, - * AD5684, AD5684R, AD5685R, AD5686, AD5686R + * AD5672R, AD5674R, AD5676, AD5676R, AD5679R, + * AD5681R, AD5682R, AD5683, AD5683R, AD5684, + * AD5684R, AD5685R, AD5686, AD5686R * Digital to analog converters driver * * Copyright 2018 Analog Devices Inc. @@ -102,8 +103,10 @@ static int ad5686_spi_remove(struct spi_device *spi) static const struct spi_device_id ad5686_spi_id[] = { {"ad5310r", ID_AD5310R}, {"ad5672r", ID_AD5672R}, + {"ad5674r", ID_AD5674R}, {"ad5676", ID_AD5676}, {"ad5676r", ID_AD5676R}, + {"ad5679r", ID_AD5679R}, {"ad5681r", ID_AD5681R}, {"ad5682r", ID_AD5682R}, {"ad5683", ID_AD5683}, diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index a332b93ca2c4..e06b29c565b9 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * AD5686R, AD5685R, AD5684R Digital to analog converters driver * @@ -71,7 +71,7 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, int ret; struct ad5686_state *st = iio_priv(indio_dev); unsigned int val, ref_bit_msk; - u8 shift; + u8 shift, address = 0; ret = strtobool(buf, &readin); if (ret) @@ -94,6 +94,9 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, case AD5686_REGMAP: shift = 0; ref_bit_msk = 0; + /* AD5674R/AD5679R have 16 channels and 2 powerdown registers */ + if (chan->channel > 0x7) + address = 0x8; break; case AD5693_REGMAP: shift = 13; @@ -107,7 +110,8 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, if (!st->use_internal_vref) val |= ref_bit_msk; - ret = st->write(st, AD5686_CMD_POWERDOWN_DAC, 0, val); + ret = st->write(st, AD5686_CMD_POWERDOWN_DAC, + address, val >> (address * 2)); return ret ? ret : len; } @@ -226,10 +230,32 @@ static struct iio_chan_spec name[] = { \ AD5868_CHANNEL(7, 7, bits, _shift), \ } +#define DECLARE_AD5679_CHANNELS(name, bits, _shift) \ +static struct iio_chan_spec name[] = { \ + AD5868_CHANNEL(0, 0, bits, _shift), \ + AD5868_CHANNEL(1, 1, bits, _shift), \ + AD5868_CHANNEL(2, 2, bits, _shift), \ + AD5868_CHANNEL(3, 3, bits, _shift), \ + AD5868_CHANNEL(4, 4, bits, _shift), \ + AD5868_CHANNEL(5, 5, bits, _shift), \ + AD5868_CHANNEL(6, 6, bits, _shift), \ + AD5868_CHANNEL(7, 7, bits, _shift), \ + AD5868_CHANNEL(8, 8, bits, _shift), \ + AD5868_CHANNEL(9, 9, bits, _shift), \ + AD5868_CHANNEL(10, 10, bits, _shift), \ + AD5868_CHANNEL(11, 11, bits, _shift), \ + AD5868_CHANNEL(12, 12, bits, _shift), \ + AD5868_CHANNEL(13, 13, bits, _shift), \ + AD5868_CHANNEL(14, 14, bits, _shift), \ + AD5868_CHANNEL(15, 15, bits, _shift), \ +} + DECLARE_AD5693_CHANNELS(ad5310r_channels, 10, 2); DECLARE_AD5693_CHANNELS(ad5311r_channels, 10, 6); DECLARE_AD5676_CHANNELS(ad5672_channels, 12, 4); +DECLARE_AD5679_CHANNELS(ad5674r_channels, 12, 4); DECLARE_AD5676_CHANNELS(ad5676_channels, 16, 0); +DECLARE_AD5679_CHANNELS(ad5679r_channels, 16, 0); DECLARE_AD5686_CHANNELS(ad5684_channels, 12, 4); DECLARE_AD5686_CHANNELS(ad5685r_channels, 14, 2); DECLARE_AD5686_CHANNELS(ad5686_channels, 16, 0); @@ -262,6 +288,12 @@ static const struct ad5686_chip_info ad5686_chip_info_tbl[] = { .num_channels = 8, .regmap_type = AD5686_REGMAP, }, + [ID_AD5674R] = { + .channels = ad5674r_channels, + .int_vref_mv = 2500, + .num_channels = 16, + .regmap_type = AD5686_REGMAP, + }, [ID_AD5675R] = { .channels = ad5676_channels, .int_vref_mv = 2500, @@ -279,6 +311,12 @@ static const struct ad5686_chip_info ad5686_chip_info_tbl[] = { .num_channels = 8, .regmap_type = AD5686_REGMAP, }, + [ID_AD5679R] = { + .channels = ad5679r_channels, + .int_vref_mv = 2500, + .num_channels = 16, + .regmap_type = AD5686_REGMAP, + }, [ID_AD5681R] = { .channels = ad5691r_channels, .int_vref_mv = 2500, diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h index 19f6917d4738..70a779939ddb 100644 --- a/drivers/iio/dac/ad5686.h +++ b/drivers/iio/dac/ad5686.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: GPL-2.0 */ /* * This file is part of AD5686 DAC driver * @@ -54,9 +54,11 @@ enum ad5686_supported_device_ids { ID_AD5311R, ID_AD5671R, ID_AD5672R, + ID_AD5674R, ID_AD5675R, ID_AD5676, ID_AD5676R, + ID_AD5679R, ID_AD5681R, ID_AD5682R, ID_AD5683, diff --git a/drivers/iio/dac/ad5696-i2c.c b/drivers/iio/dac/ad5696-i2c.c index 7350d9806a11..ccf794caef43 100644 --- a/drivers/iio/dac/ad5696-i2c.c +++ b/drivers/iio/dac/ad5696-i2c.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * AD5671R, AD5675R, AD5691R, AD5692R, AD5693, AD5693R, * AD5694, AD5694R, AD5695R, AD5696, AD5696R diff --git a/drivers/iio/dac/ad5758.c b/drivers/iio/dac/ad5758.c index ef41f12bf262..2bdf1b0aee06 100644 --- a/drivers/iio/dac/ad5758.c +++ b/drivers/iio/dac/ad5758.c @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0 /* * AD5758 Digital to analog converters driver * diff --git a/drivers/iio/dac/ti-dac7612.c b/drivers/iio/dac/ti-dac7612.c new file mode 100644 index 000000000000..c46805144dd4 --- /dev/null +++ b/drivers/iio/dac/ti-dac7612.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DAC7612 Dual, 12-Bit Serial input Digital-to-Analog Converter + * + * Copyright 2019 Qtechnology A/S + * 2019 Ricardo Ribalda <ricardo@ribalda.com> + * + * Licensed under the GPL-2. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/gpio/consumer.h> +#include <linux/iio/iio.h> + +#define DAC7612_RESOLUTION 12 +#define DAC7612_ADDRESS 4 +#define DAC7612_START 5 + +struct dac7612 { + struct spi_device *spi; + struct gpio_desc *loaddacs; + uint16_t cache[2]; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + uint8_t data[2] ____cacheline_aligned; +}; + +static int dac7612_cmd_single(struct dac7612 *priv, int channel, u16 val) +{ + int ret; + + priv->data[0] = BIT(DAC7612_START) | (channel << DAC7612_ADDRESS); + priv->data[0] |= val >> 8; + priv->data[1] = val & 0xff; + + priv->cache[channel] = val; + + ret = spi_write(priv->spi, priv->data, sizeof(priv->data)); + if (ret) + return ret; + + gpiod_set_value(priv->loaddacs, 1); + gpiod_set_value(priv->loaddacs, 0); + + return 0; +} + +#define dac7612_CHANNEL(chan, name) { \ + .type = IIO_VOLTAGE, \ + .channel = (chan), \ + .indexed = 1, \ + .output = 1, \ + .datasheet_name = name, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec dac7612_channels[] = { + dac7612_CHANNEL(0, "OUTA"), + dac7612_CHANNEL(1, "OUTB"), +}; + +static int dac7612_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct dac7612 *priv; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + priv = iio_priv(iio_dev); + *val = priv->cache[chan->channel]; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = 1; + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int dac7612_write_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long mask) +{ + struct dac7612 *priv = iio_priv(iio_dev); + int ret; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if ((val >= BIT(DAC7612_RESOLUTION)) || val < 0 || val2) + return -EINVAL; + + if (val == priv->cache[chan->channel]) + return 0; + + mutex_lock(&iio_dev->mlock); + ret = dac7612_cmd_single(priv, chan->channel, val); + mutex_unlock(&iio_dev->mlock); + + return ret; +} + +static const struct iio_info dac7612_info = { + .read_raw = dac7612_read_raw, + .write_raw = dac7612_write_raw, +}; + +static int dac7612_probe(struct spi_device *spi) +{ + struct iio_dev *iio_dev; + struct dac7612 *priv; + int i; + int ret; + + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*priv)); + if (!iio_dev) + return -ENOMEM; + + priv = iio_priv(iio_dev); + /* + * LOADDACS pin can be controlled by the driver or externally. + * When controlled by the driver, the DAC value is updated after + * every write. + * When the driver does not control the PIN, the user or an external + * event can change the value of all DACs by pulsing down the LOADDACs + * pin. + */ + priv->loaddacs = devm_gpiod_get_optional(&spi->dev, "ti,loaddacs", + GPIOD_OUT_LOW); + if (IS_ERR(priv->loaddacs)) + return PTR_ERR(priv->loaddacs); + priv->spi = spi; + spi_set_drvdata(spi, iio_dev); + iio_dev->dev.parent = &spi->dev; + iio_dev->info = &dac7612_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = dac7612_channels; + iio_dev->num_channels = ARRAY_SIZE(priv->cache); + iio_dev->name = spi_get_device_id(spi)->name; + + for (i = 0; i < ARRAY_SIZE(priv->cache); i++) { + ret = dac7612_cmd_single(priv, i, 0); + if (ret) + return ret; + } + + return devm_iio_device_register(&spi->dev, iio_dev); +} + +static const struct spi_device_id dac7612_id[] = { + {"ti-dac7612"}, + {} +}; +MODULE_DEVICE_TABLE(spi, dac7612_id); + +static const struct of_device_id dac7612_of_match[] = { + { .compatible = "ti,dac7612" }, + { .compatible = "ti,dac7612u" }, + { .compatible = "ti,dac7612ub" }, + { }, +}; +MODULE_DEVICE_TABLE(of, dac7612_of_match); + +static struct spi_driver dac7612_driver = { + .driver = { + .name = "ti-dac7612", + .of_match_table = dac7612_of_match, + }, + .probe = dac7612_probe, + .id_table = dac7612_id, +}; +module_spi_driver(dac7612_driver); + +MODULE_AUTHOR("Ricardo Ribalda <ricardo@ribalda.com>"); +MODULE_DESCRIPTION("Texas Instruments DAC7612 DAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c index f3f94fbdd20a..3f9be69499ec 100644 --- a/drivers/iio/frequency/ad9523.c +++ b/drivers/iio/frequency/ad9523.c @@ -943,11 +943,14 @@ static int ad9523_setup(struct iio_dev *indio_dev) } } - for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN) - ad9523_write(indio_dev, + for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN) { + ret = ad9523_write(indio_dev, AD9523_CHANNEL_CLOCK_DIST(i), AD9523_CLK_DIST_DRIVER_MODE(TRISTATE) | AD9523_CLK_DIST_PWR_DOWN_EN); + if (ret < 0) + return ret; + } ret = ad9523_write(indio_dev, AD9523_POWER_DOWN_CTRL, 0); if (ret < 0) diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h index 2351049d930b..621f5309d735 100644 --- a/drivers/iio/imu/bmi160/bmi160.h +++ b/drivers/iio/imu/bmi160/bmi160.h @@ -2,9 +2,20 @@ #ifndef BMI160_H_ #define BMI160_H_ +#include <linux/iio/iio.h> + +struct bmi160_data { + struct regmap *regmap; + struct iio_trigger *trig; +}; + extern const struct regmap_config bmi160_regmap_config; int bmi160_core_probe(struct device *dev, struct regmap *regmap, const char *name, bool use_spi); +int bmi160_enable_irq(struct regmap *regmap, bool enable); + +int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type); + #endif /* BMI160_H_ */ diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index b10330b0f93f..6af65d6f1d28 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -1,26 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 /* * BMI160 - Bosch IMU (accel, gyro plus external magnetometer) * * Copyright (c) 2016, Intel Corporation. - * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. + * Copyright (c) 2019, Martin Kelly. * * IIO core driver for BMI160, with support for I2C/SPI busses * - * TODO: magnetometer, interrupts, hardware FIFO + * TODO: magnetometer, hardware FIFO */ #include <linux/module.h> #include <linux/regmap.h> #include <linux/acpi.h> #include <linux/delay.h> +#include <linux/irq.h> +#include <linux/of_irq.h> #include <linux/iio/iio.h> #include <linux/iio/triggered_buffer.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/buffer.h> #include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> #include "bmi160.h" @@ -64,8 +65,32 @@ #define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17 #define BMI160_CMD_SOFTRESET 0xB6 +#define BMI160_REG_INT_EN 0x51 +#define BMI160_DRDY_INT_EN BIT(4) + +#define BMI160_REG_INT_OUT_CTRL 0x53 +#define BMI160_INT_OUT_CTRL_MASK 0x0f +#define BMI160_INT1_OUT_CTRL_SHIFT 0 +#define BMI160_INT2_OUT_CTRL_SHIFT 4 +#define BMI160_EDGE_TRIGGERED BIT(0) +#define BMI160_ACTIVE_HIGH BIT(1) +#define BMI160_OPEN_DRAIN BIT(2) +#define BMI160_OUTPUT_EN BIT(3) + +#define BMI160_REG_INT_LATCH 0x54 +#define BMI160_INT1_LATCH_MASK BIT(4) +#define BMI160_INT2_LATCH_MASK BIT(5) + +/* INT1 and INT2 are in the opposite order as in INT_OUT_CTRL! */ +#define BMI160_REG_INT_MAP 0x56 +#define BMI160_INT1_MAP_DRDY_EN 0x80 +#define BMI160_INT2_MAP_DRDY_EN 0x08 + #define BMI160_REG_DUMMY 0x7F +#define BMI160_NORMAL_WRITE_USLEEP 2 +#define BMI160_SUSPENDED_WRITE_USLEEP 450 + #define BMI160_ACCEL_PMU_MIN_USLEEP 3800 #define BMI160_GYRO_PMU_MIN_USLEEP 80000 #define BMI160_SOFTRESET_USLEEP 1000 @@ -108,8 +133,9 @@ enum bmi160_sensor_type { BMI160_NUM_SENSORS /* must be last */ }; -struct bmi160_data { - struct regmap *regmap; +enum bmi160_int_pin { + BMI160_PIN_INT1, + BMI160_PIN_INT2 }; const struct regmap_config bmi160_regmap_config = { @@ -273,7 +299,7 @@ int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t, cmd = bmi160_regs[t].pmu_cmd_suspend; ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd); - if (ret < 0) + if (ret) return ret; usleep_range(bmi160_pmu_time[t], bmi160_pmu_time[t] + 1000); @@ -305,7 +331,7 @@ int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t, int i, ret, val; ret = regmap_read(data->regmap, bmi160_regs[t].range, &val); - if (ret < 0) + if (ret) return ret; for (i = 0; i < bmi160_scale_table[t].num; i++) @@ -328,7 +354,7 @@ static int bmi160_get_data(struct bmi160_data *data, int chan_type, reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(sample); ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(sample)); - if (ret < 0) + if (ret) return ret; *val = sign_extend32(le16_to_cpu(sample), 15); @@ -362,7 +388,7 @@ static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t, int i, val, ret; ret = regmap_read(data->regmap, bmi160_regs[t].config, &val); - if (ret < 0) + if (ret) return ret; val &= bmi160_regs[t].config_odr_mask; @@ -394,13 +420,12 @@ static irqreturn_t bmi160_trigger_handler(int irq, void *p) indio_dev->masklength) { ret = regmap_bulk_read(data->regmap, base + i * sizeof(sample), &sample, sizeof(sample)); - if (ret < 0) + if (ret) goto done; buf[j++] = sample; } - iio_push_to_buffers_with_timestamp(indio_dev, buf, - iio_get_time_ns(indio_dev)); + iio_push_to_buffers_with_timestamp(indio_dev, buf, pf->timestamp); done: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; @@ -416,18 +441,18 @@ static int bmi160_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: ret = bmi160_get_data(data, chan->type, chan->channel2, val); - if (ret < 0) + if (ret) return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; ret = bmi160_get_scale(data, bmi160_to_sensor(chan->type), val2); - return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type), val, val2); - return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO; + return ret ? ret : IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } @@ -498,6 +523,186 @@ static const char *bmi160_match_acpi_device(struct device *dev) return dev_name(dev); } +static int bmi160_write_conf_reg(struct regmap *regmap, unsigned int reg, + unsigned int mask, unsigned int bits, + unsigned int write_usleep) +{ + int ret; + unsigned int val; + + ret = regmap_read(regmap, reg, &val); + if (ret) + return ret; + + val = (val & ~mask) | bits; + + ret = regmap_write(regmap, reg, val); + if (ret) + return ret; + + /* + * We need to wait after writing before we can write again. See the + * datasheet, page 93. + */ + usleep_range(write_usleep, write_usleep + 1000); + + return 0; +} + +static int bmi160_config_pin(struct regmap *regmap, enum bmi160_int_pin pin, + bool open_drain, u8 irq_mask, + unsigned long write_usleep) +{ + int ret; + struct device *dev = regmap_get_device(regmap); + u8 int_out_ctrl_shift; + u8 int_latch_mask; + u8 int_map_mask; + u8 int_out_ctrl_mask; + u8 int_out_ctrl_bits; + const char *pin_name; + + switch (pin) { + case BMI160_PIN_INT1: + int_out_ctrl_shift = BMI160_INT1_OUT_CTRL_SHIFT; + int_latch_mask = BMI160_INT1_LATCH_MASK; + int_map_mask = BMI160_INT1_MAP_DRDY_EN; + break; + case BMI160_PIN_INT2: + int_out_ctrl_shift = BMI160_INT2_OUT_CTRL_SHIFT; + int_latch_mask = BMI160_INT2_LATCH_MASK; + int_map_mask = BMI160_INT2_MAP_DRDY_EN; + break; + } + int_out_ctrl_mask = BMI160_INT_OUT_CTRL_MASK << int_out_ctrl_shift; + + /* + * Enable the requested pin with the right settings: + * - Push-pull/open-drain + * - Active low/high + * - Edge/level triggered + */ + int_out_ctrl_bits = BMI160_OUTPUT_EN; + if (open_drain) + /* Default is push-pull. */ + int_out_ctrl_bits |= BMI160_OPEN_DRAIN; + int_out_ctrl_bits |= irq_mask; + int_out_ctrl_bits <<= int_out_ctrl_shift; + + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_OUT_CTRL, + int_out_ctrl_mask, int_out_ctrl_bits, + write_usleep); + if (ret) + return ret; + + /* Set the pin to input mode with no latching. */ + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_LATCH, + int_latch_mask, int_latch_mask, + write_usleep); + if (ret) + return ret; + + /* Map interrupts to the requested pin. */ + ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_MAP, + int_map_mask, int_map_mask, + write_usleep); + if (ret) { + switch (pin) { + case BMI160_PIN_INT1: + pin_name = "INT1"; + break; + case BMI160_PIN_INT2: + pin_name = "INT2"; + break; + } + dev_err(dev, "Failed to configure %s IRQ pin", pin_name); + } + + return ret; +} + +int bmi160_enable_irq(struct regmap *regmap, bool enable) +{ + unsigned int enable_bit = 0; + + if (enable) + enable_bit = BMI160_DRDY_INT_EN; + + return bmi160_write_conf_reg(regmap, BMI160_REG_INT_EN, + BMI160_DRDY_INT_EN, enable_bit, + BMI160_NORMAL_WRITE_USLEEP); +} +EXPORT_SYMBOL(bmi160_enable_irq); + +static int bmi160_get_irq(struct device_node *of_node, enum bmi160_int_pin *pin) +{ + int irq; + + /* Use INT1 if possible, otherwise fall back to INT2. */ + irq = of_irq_get_byname(of_node, "INT1"); + if (irq > 0) { + *pin = BMI160_PIN_INT1; + return irq; + } + + irq = of_irq_get_byname(of_node, "INT2"); + if (irq > 0) + *pin = BMI160_PIN_INT2; + + return irq; +} + +static int bmi160_config_device_irq(struct iio_dev *indio_dev, int irq_type, + enum bmi160_int_pin pin) +{ + bool open_drain; + u8 irq_mask; + struct bmi160_data *data = iio_priv(indio_dev); + struct device *dev = regmap_get_device(data->regmap); + + /* Level-triggered, active-low is the default if we set all zeroes. */ + if (irq_type == IRQF_TRIGGER_RISING) + irq_mask = BMI160_ACTIVE_HIGH | BMI160_EDGE_TRIGGERED; + else if (irq_type == IRQF_TRIGGER_FALLING) + irq_mask = BMI160_EDGE_TRIGGERED; + else if (irq_type == IRQF_TRIGGER_HIGH) + irq_mask = BMI160_ACTIVE_HIGH; + else if (irq_type == IRQF_TRIGGER_LOW) + irq_mask = 0; + else { + dev_err(&indio_dev->dev, + "Invalid interrupt type 0x%x specified\n", irq_type); + return -EINVAL; + } + + open_drain = of_property_read_bool(dev->of_node, "drive-open-drain"); + + return bmi160_config_pin(data->regmap, pin, open_drain, irq_mask, + BMI160_NORMAL_WRITE_USLEEP); +} + +static int bmi160_setup_irq(struct iio_dev *indio_dev, int irq, + enum bmi160_int_pin pin) +{ + struct irq_data *desc; + u32 irq_type; + int ret; + + desc = irq_get_irq_data(irq); + if (!desc) { + dev_err(&indio_dev->dev, "Could not find IRQ %d\n", irq); + return -EINVAL; + } + + irq_type = irqd_get_trigger_type(desc); + + ret = bmi160_config_device_irq(indio_dev, irq_type, pin); + if (ret) + return ret; + + return bmi160_probe_trigger(indio_dev, irq, irq_type); +} + static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) { int ret; @@ -505,7 +710,7 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) struct device *dev = regmap_get_device(data->regmap); ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET); - if (ret < 0) + if (ret) return ret; usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1); @@ -516,12 +721,12 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) */ if (use_spi) { ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val); - if (ret < 0) + if (ret) return ret; } ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val); - if (ret < 0) { + if (ret) { dev_err(dev, "Error reading chip id\n"); return ret; } @@ -532,16 +737,59 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) } ret = bmi160_set_mode(data, BMI160_ACCEL, true); - if (ret < 0) + if (ret) return ret; ret = bmi160_set_mode(data, BMI160_GYRO, true); - if (ret < 0) + if (ret) return ret; return 0; } +static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool enable) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct bmi160_data *data = iio_priv(indio_dev); + + return bmi160_enable_irq(data->regmap, enable); +} + +static const struct iio_trigger_ops bmi160_trigger_ops = { + .set_trigger_state = &bmi160_data_rdy_trigger_set_state, +}; + +int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type) +{ + struct bmi160_data *data = iio_priv(indio_dev); + int ret; + + data->trig = devm_iio_trigger_alloc(&indio_dev->dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + + if (data->trig == NULL) + return -ENOMEM; + + ret = devm_request_irq(&indio_dev->dev, irq, + &iio_trigger_generic_data_rdy_poll, + irq_type, "bmi160", data->trig); + if (ret) + return ret; + + data->trig->dev.parent = regmap_get_device(data->regmap); + data->trig->ops = &bmi160_trigger_ops; + iio_trigger_set_drvdata(data->trig, indio_dev); + + ret = devm_iio_trigger_register(&indio_dev->dev, data->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(data->trig); + + return 0; +} + static void bmi160_chip_uninit(void *data) { struct bmi160_data *bmi_data = data; @@ -555,6 +803,8 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, { struct iio_dev *indio_dev; struct bmi160_data *data; + int irq; + enum bmi160_int_pin int_pin; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); @@ -566,11 +816,11 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, data->regmap = regmap; ret = bmi160_chip_init(data, use_spi); - if (ret < 0) + if (ret) return ret; ret = devm_add_action_or_reset(dev, bmi160_chip_uninit, data); - if (ret < 0) + if (ret) return ret; if (!name && ACPI_HANDLE(dev)) @@ -583,16 +833,23 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap, indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &bmi160_info; - ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + iio_pollfunc_store_time, bmi160_trigger_handler, NULL); - if (ret < 0) + if (ret) return ret; - ret = devm_iio_device_register(dev, indio_dev); - if (ret < 0) - return ret; + irq = bmi160_get_irq(dev->of_node, &int_pin); + if (irq > 0) { + ret = bmi160_setup_irq(indio_dev, irq, int_pin); + if (ret) + dev_err(&indio_dev->dev, "Failed to setup IRQ %d\n", + irq); + } else { + dev_info(&indio_dev->dev, "Not setting up IRQ trigger\n"); + } - return 0; + return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_GPL(bmi160_core_probe); diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c index 5b1f7e6af651..e36f5e82d400 100644 --- a/drivers/iio/imu/bmi160/bmi160_i2c.c +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * BMI160 - Bosch IMU, I2C bits * * Copyright (c) 2016, Intel Corporation. * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * * 7-bit I2C slave address is: * - 0x68 if SDO is pulled to GND * - 0x69 if SDO is pulled to VDDIO diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c index e521ad14eeac..c19e3df35559 100644 --- a/drivers/iio/imu/bmi160/bmi160_spi.c +++ b/drivers/iio/imu/bmi160/bmi160_spi.c @@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * BMI160 - Bosch IMU, SPI bits * * Copyright (c) 2016, Intel Corporation. * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. */ #include <linux/acpi.h> #include <linux/module.h> diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig index 5483b2ea754d..d2fe9dbddda7 100644 --- a/drivers/iio/imu/inv_mpu6050/Kconfig +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -13,8 +13,8 @@ config INV_MPU6050_I2C select INV_MPU6050_IIO select REGMAP_I2C help - This driver supports the Invensense MPU6050/6500/9150 and ICM20608 - motion tracking devices over I2C. + This driver supports the Invensense MPU6050/6500/9150 and + ICM20608/20602 motion tracking devices over I2C. This driver can be built as a module. The module will be called inv-mpu6050-i2c. @@ -24,7 +24,7 @@ config INV_MPU6050_SPI select INV_MPU6050_IIO select REGMAP_SPI help - This driver supports the Invensense MPU6050/6500/9150 and ICM20608 - motion tracking devices over SPI. + This driver supports the Invensense MPU6050/6500/9150 and + ICM20608/20602 motion tracking devices over SPI. This driver can be built as a module. The module will be called inv-mpu6050-spi. diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 1e428c196a82..650de0fefb7b 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -38,6 +38,29 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724}; */ static const int accel_scale[] = {598, 1196, 2392, 4785}; +static const struct inv_mpu6050_reg_map reg_set_icm20602 = { + .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, + .lpf = INV_MPU6050_REG_CONFIG, + .accel_lpf = INV_MPU6500_REG_ACCEL_CONFIG_2, + .user_ctrl = INV_MPU6050_REG_USER_CTRL, + .fifo_en = INV_MPU6050_REG_FIFO_EN, + .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, + .accl_config = INV_MPU6050_REG_ACCEL_CONFIG, + .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H, + .fifo_r_w = INV_MPU6050_REG_FIFO_R_W, + .raw_gyro = INV_MPU6050_REG_RAW_GYRO, + .raw_accl = INV_MPU6050_REG_RAW_ACCEL, + .temperature = INV_MPU6050_REG_TEMPERATURE, + .int_enable = INV_MPU6050_REG_INT_ENABLE, + .int_status = INV_MPU6050_REG_INT_STATUS, + .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, + .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, + .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, + .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET, + .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, + .i2c_if = INV_ICM20602_REG_I2C_IF, +}; + static const struct inv_mpu6050_reg_map reg_set_6500 = { .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, .lpf = INV_MPU6050_REG_CONFIG, @@ -58,6 +81,7 @@ static const struct inv_mpu6050_reg_map reg_set_6500 = { .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET, .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, + .i2c_if = 0, }; static const struct inv_mpu6050_reg_map reg_set_6050 = { @@ -78,6 +102,7 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = { .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG, .accl_offset = INV_MPU6050_REG_ACCEL_OFFSET, .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET, + .i2c_if = 0, }; static const struct inv_mpu6050_chip_config chip_config_6050 = { @@ -140,6 +165,12 @@ static const struct inv_mpu6050_hw hw_info[] = { .reg = ®_set_6500, .config = &chip_config_6050, }, + { + .whoami = INV_ICM20602_WHOAMI_VALUE, + .name = "ICM20602", + .reg = ®_set_icm20602, + .config = &chip_config_6050, + }, }; int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c index dd758e3d403d..e46eb4ddea21 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c @@ -127,6 +127,7 @@ static int inv_mpu_probe(struct i2c_client *client, st = iio_priv(dev_get_drvdata(&client->dev)); switch (st->chip_type) { case INV_ICM20608: + case INV_ICM20602: /* no i2c auxiliary bus on the chip */ break; default: @@ -179,6 +180,7 @@ static const struct i2c_device_id inv_mpu_id[] = { {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, + {"icm20602", INV_ICM20602}, {} }; @@ -213,6 +215,10 @@ static const struct of_device_id inv_of_match[] = { .compatible = "invensense,icm20608", .data = (void *)INV_ICM20608 }, + { + .compatible = "invensense,icm20602", + .data = (void *)INV_ICM20602 + }, { } }; MODULE_DEVICE_TABLE(of, inv_of_match); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index 6bcc11fc1b88..325afd9f5f61 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -44,6 +44,7 @@ * @int_pin_cfg; Controls interrupt pin configuration. * @accl_offset: Controls the accelerometer calibration offset. * @gyro_offset: Controls the gyroscope calibration offset. + * @i2c_if: Controls the i2c interface */ struct inv_mpu6050_reg_map { u8 sample_rate_div; @@ -65,6 +66,7 @@ struct inv_mpu6050_reg_map { u8 int_pin_cfg; u8 accl_offset; u8 gyro_offset; + u8 i2c_if; }; /*device enum */ @@ -77,6 +79,7 @@ enum inv_devices { INV_MPU9250, INV_MPU9255, INV_ICM20608, + INV_ICM20602, INV_NUM_PARTS }; @@ -195,6 +198,10 @@ struct inv_mpu6050_state { #define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38 #define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07 +/* ICM20602 register */ +#define INV_ICM20602_REG_I2C_IF 0x70 +#define INV_ICM20602_BIT_I2C_IF_DIS 0x40 + #define INV_MPU6050_REG_FIFO_COUNT_H 0x72 #define INV_MPU6050_REG_FIFO_R_W 0x74 @@ -261,6 +268,7 @@ struct inv_mpu6050_state { #define INV_MPU9255_WHOAMI_VALUE 0x73 #define INV_MPU6515_WHOAMI_VALUE 0x74 #define INV_ICM20608_WHOAMI_VALUE 0xAF +#define INV_ICM20602_WHOAMI_VALUE 0x12 /* scan element definition */ enum inv_mpu6050_scan { diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c index 227f50afff22..a112c3f45f74 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c @@ -31,9 +31,14 @@ static int inv_mpu_i2c_disable(struct iio_dev *indio_dev) if (ret) return ret; - st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS; - ret = regmap_write(st->map, st->reg->user_ctrl, - st->chip_config.user_ctrl); + if (st->reg->i2c_if) { + ret = regmap_write(st->map, st->reg->i2c_if, + INV_ICM20602_BIT_I2C_IF_DIS); + } else { + st->chip_config.user_ctrl |= INV_MPU6050_BIT_I2C_IF_DIS; + ret = regmap_write(st->map, st->reg->user_ctrl, + st->chip_config.user_ctrl); + } if (ret) { inv_mpu6050_set_power_itg(st, false); return ret; @@ -81,6 +86,7 @@ static const struct spi_device_id inv_mpu_id[] = { {"mpu9250", INV_MPU9250}, {"mpu9255", INV_MPU9255}, {"icm20608", INV_ICM20608}, + {"icm20602", INV_ICM20602}, {} }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c index 8e47dccdd40f..66fbcd94642d 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -105,12 +105,10 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr, u8 *data, int len) { - const struct st_lsm6dsx_shub_settings *hub_settings; int err; mutex_lock(&hw->page_lock); - hub_settings = &hw->settings->shub_settings; err = st_lsm6dsx_set_page(hw, true); if (err < 0) goto out; diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 4f5cd9f60870..4700fd5d8c90 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -87,6 +87,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_GRAVITY] = "gravity", [IIO_POSITIONRELATIVE] = "positionrelative", [IIO_PHASE] = "phase", + [IIO_MASSCONCENTRATION] = "massconcentration", }; static const char * const iio_modifier_names[] = { @@ -127,6 +128,10 @@ static const char * const iio_modifier_names[] = { [IIO_MOD_Q] = "q", [IIO_MOD_CO2] = "co2", [IIO_MOD_VOC] = "voc", + [IIO_MOD_PM1] = "pm1", + [IIO_MOD_PM2P5] = "pm2p5", + [IIO_MOD_PM4] = "pm4", + [IIO_MOD_PM10] = "pm10", }; /* relies on pairs of these shared then separate */ diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 36f458433480..5190eacfeb0a 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -299,6 +299,16 @@ config MAX44000 To compile this driver as a module, choose M here: the module will be called max44000. +config MAX44009 + tristate "MAX44009 Ambient Light Sensor" + depends on I2C + help + Say Y here if you want to build support for Maxim Integrated's + MAX44009 ambient light sensor device. + + To compile this driver as a module, choose M here: + the module will be called max44009. + config OPT3001 tristate "Texas Instruments OPT3001 Light Sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index 286bf3975372..e40794fbb435 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_LTR501) += ltr501.o obj-$(CONFIG_LV0104CS) += lv0104cs.o obj-$(CONFIG_MAX44000) += max44000.o +obj-$(CONFIG_MAX44009) += max44009.o obj-$(CONFIG_OPT3001) += opt3001.o obj-$(CONFIG_PA12203001) += pa12203001.o obj-$(CONFIG_RPR0521) += rpr0521.o diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c index b45400f8fef4..846df4dce48c 100644 --- a/drivers/iio/light/isl29018.c +++ b/drivers/iio/light/isl29018.c @@ -23,6 +23,7 @@ #include <linux/mutex.h> #include <linux/delay.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -95,6 +96,7 @@ struct isl29018_chip { struct isl29018_scale scale; int prox_scheme; bool suspended; + struct regulator *vcc_reg; }; static int isl29018_set_integration_time(struct isl29018_chip *chip, @@ -708,6 +710,16 @@ static const char *isl29018_match_acpi_device(struct device *dev, int *data) return dev_name(dev); } +static void isl29018_disable_regulator_action(void *_data) +{ + struct isl29018_chip *chip = _data; + int err; + + err = regulator_disable(chip->vcc_reg); + if (err) + pr_err("failed to disable isl29018's VCC regulator!\n"); +} + static int isl29018_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -742,6 +754,27 @@ static int isl29018_probe(struct i2c_client *client, chip->scale = isl29018_scales[chip->int_time][0]; chip->suspended = false; + chip->vcc_reg = devm_regulator_get(&client->dev, "vcc"); + if (IS_ERR(chip->vcc_reg)) { + err = PTR_ERR(chip->vcc_reg); + if (err != -EPROBE_DEFER) + dev_err(&client->dev, "failed to get VCC regulator!\n"); + return err; + } + + err = regulator_enable(chip->vcc_reg); + if (err) { + dev_err(&client->dev, "failed to enable VCC regulator!\n"); + return err; + } + + err = devm_add_action_or_reset(&client->dev, isl29018_disable_regulator_action, + chip); + if (err) { + dev_err(&client->dev, "failed to setup regulator cleanup action!\n"); + return err; + } + chip->regmap = devm_regmap_init_i2c(client, isl29018_chip_info_tbl[dev_id].regmap_cfg); if (IS_ERR(chip->regmap)) { @@ -768,6 +801,7 @@ static int isl29018_probe(struct i2c_client *client, static int isl29018_suspend(struct device *dev) { struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev)); + int ret; mutex_lock(&chip->lock); @@ -777,10 +811,13 @@ static int isl29018_suspend(struct device *dev) * So we do not have much to do here. */ chip->suspended = true; + ret = regulator_disable(chip->vcc_reg); + if (ret) + dev_err(dev, "failed to disable VCC regulator\n"); mutex_unlock(&chip->lock); - return 0; + return ret; } static int isl29018_resume(struct device *dev) @@ -790,6 +827,13 @@ static int isl29018_resume(struct device *dev) mutex_lock(&chip->lock); + err = regulator_enable(chip->vcc_reg); + if (err) { + dev_err(dev, "failed to enable VCC regulator\n"); + mutex_unlock(&chip->lock); + return err; + } + err = isl29018_chip_init(chip); if (!err) chip->suspended = false; diff --git a/drivers/iio/light/max44009.c b/drivers/iio/light/max44009.c new file mode 100644 index 000000000000..00ba15499638 --- /dev/null +++ b/drivers/iio/light/max44009.c @@ -0,0 +1,555 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * max44009.c - Support for MAX44009 Ambient Light Sensor + * + * Copyright (c) 2019 Robert Eshleman <bobbyeshleman@gmail.com> + * + * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX44009.pdf + * + * TODO: Support continuous mode and configuring from manual mode to + * automatic mode. + * + * Default I2C address: 0x4a + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/bits.h> +#include <linux/i2c.h> +#include <linux/iio/events.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/util_macros.h> + +#define MAX44009_DRV_NAME "max44009" + +/* Registers in datasheet order */ +#define MAX44009_REG_INT_STATUS 0x0 +#define MAX44009_REG_INT_EN 0x1 +#define MAX44009_REG_CFG 0x2 +#define MAX44009_REG_LUX_HI 0x3 +#define MAX44009_REG_LUX_LO 0x4 +#define MAX44009_REG_UPPER_THR 0x5 +#define MAX44009_REG_LOWER_THR 0x6 +#define MAX44009_REG_THR_TIMER 0x7 + +#define MAX44009_CFG_TIM_MASK GENMASK(2, 0) +#define MAX44009_CFG_MAN_MODE_MASK BIT(6) + +/* The maximum rising threshold for the max44009 */ +#define MAX44009_MAXIMUM_THRESHOLD 7520256 + +#define MAX44009_THRESH_EXP_MASK (0xf << 4) +#define MAX44009_THRESH_EXP_RSHIFT 4 +#define MAX44009_THRESH_MANT_LSHIFT 4 +#define MAX44009_THRESH_MANT_MASK 0xf + +#define MAX44009_UPPER_THR_MINIMUM 15 + +/* The max44009 always scales raw readings by 0.045 and is non-configurable */ +#define MAX44009_SCALE_NUMERATOR 45 +#define MAX44009_SCALE_DENOMINATOR 1000 + +/* The fixed-point fractional multiplier for de-scaling threshold values */ +#define MAX44009_FRACT_MULT 1000000 + +static const u32 max44009_int_time_ns_array[] = { + 800000000, + 400000000, + 200000000, + 100000000, + 50000000, /* Manual mode only */ + 25000000, /* Manual mode only */ + 12500000, /* Manual mode only */ + 6250000, /* Manual mode only */ +}; + +static const char max44009_int_time_str[] = + "0.8 " + "0.4 " + "0.2 " + "0.1 " + "0.05 " + "0.025 " + "0.0125 " + "0.00625"; + +struct max44009_data { + struct i2c_client *client; + struct mutex lock; +}; + +static const struct iio_event_spec max44009_event_spec[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE), + }, + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE), + }, +}; + +static const struct iio_chan_spec max44009_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_INT_TIME), + .event_spec = max44009_event_spec, + .num_event_specs = ARRAY_SIZE(max44009_event_spec), + }, +}; + +static int max44009_read_int_time(struct max44009_data *data) +{ + + int ret = i2c_smbus_read_byte_data(data->client, MAX44009_REG_CFG); + + if (ret < 0) + return ret; + + return max44009_int_time_ns_array[ret & MAX44009_CFG_TIM_MASK]; +} + +static int max44009_write_int_time(struct max44009_data *data, + int val, int val2) +{ + struct i2c_client *client = data->client; + int ret, int_time, config; + s64 ns; + + ns = val * NSEC_PER_SEC + val2; + int_time = find_closest_descending( + ns, + max44009_int_time_ns_array, + ARRAY_SIZE(max44009_int_time_ns_array)); + + ret = i2c_smbus_read_byte_data(client, MAX44009_REG_CFG); + if (ret < 0) + return ret; + + config = ret; + config &= int_time; + + /* + * To set the integration time, the device must also be in manual + * mode. + */ + config |= MAX44009_CFG_MAN_MODE_MASK; + + return i2c_smbus_write_byte_data(client, MAX44009_REG_CFG, config); +} + +static int max44009_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct max44009_data *data = iio_priv(indio_dev); + int ret; + + if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) { + mutex_lock(&data->lock); + ret = max44009_write_int_time(data, val, val2); + mutex_unlock(&data->lock); + return ret; + } + return -EINVAL; +} + +static int max44009_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static int max44009_lux_raw(u8 hi, u8 lo) +{ + int mantissa; + int exponent; + + /* + * The mantissa consists of the low nibble of the Lux High Byte + * and the low nibble of the Lux Low Byte. + */ + mantissa = ((hi & 0xf) << 4) | (lo & 0xf); + + /* The exponent byte is just the upper nibble of the Lux High Byte */ + exponent = (hi >> 4) & 0xf; + + /* + * The exponent value is base 2 to the power of the raw exponent byte. + */ + exponent = 1 << exponent; + + return exponent * mantissa; +} + +#define MAX44009_READ_LUX_XFER_LEN (4) + +static int max44009_read_lux_raw(struct max44009_data *data) +{ + int ret; + u8 hireg = MAX44009_REG_LUX_HI; + u8 loreg = MAX44009_REG_LUX_LO; + u8 lo = 0; + u8 hi = 0; + + struct i2c_msg msgs[] = { + { + .addr = data->client->addr, + .flags = 0, + .len = sizeof(hireg), + .buf = &hireg, + }, + { + .addr = data->client->addr, + .flags = I2C_M_RD, + .len = sizeof(hi), + .buf = &hi, + }, + { + .addr = data->client->addr, + .flags = 0, + .len = sizeof(loreg), + .buf = &loreg, + }, + { + .addr = data->client->addr, + .flags = I2C_M_RD, + .len = sizeof(lo), + .buf = &lo, + } + }; + + /* + * Use i2c_transfer instead of smbus read because i2c_transfer + * does NOT use a stop bit between address write and data read. + * Using a stop bit causes disjoint upper/lower byte reads and + * reduces accuracy. + */ + ret = i2c_transfer(data->client->adapter, + msgs, MAX44009_READ_LUX_XFER_LEN); + + if (ret != MAX44009_READ_LUX_XFER_LEN) + return -EIO; + + return max44009_lux_raw(hi, lo); +} + +static int max44009_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct max44009_data *data = iio_priv(indio_dev); + int lux_raw; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_LIGHT: + ret = max44009_read_lux_raw(data); + if (ret < 0) + return ret; + lux_raw = ret; + + *val = lux_raw * MAX44009_SCALE_NUMERATOR; + *val2 = MAX44009_SCALE_DENOMINATOR; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_INT_TIME: + switch (chan->type) { + case IIO_LIGHT: + ret = max44009_read_int_time(data); + if (ret < 0) + return ret; + + *val2 = ret; + *val = 0; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static IIO_CONST_ATTR(illuminance_integration_time_available, + max44009_int_time_str); + +static struct attribute *max44009_attributes[] = { + &iio_const_attr_illuminance_integration_time_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group max44009_attribute_group = { + .attrs = max44009_attributes, +}; + +static int max44009_threshold_byte_from_fraction(int integral, int fractional) +{ + int mantissa, exp; + + if ((integral <= 0 && fractional <= 0) || + integral > MAX44009_MAXIMUM_THRESHOLD || + (integral == MAX44009_MAXIMUM_THRESHOLD && fractional != 0)) + return -EINVAL; + + /* Reverse scaling of fixed-point integral */ + mantissa = integral * MAX44009_SCALE_DENOMINATOR; + mantissa /= MAX44009_SCALE_NUMERATOR; + + /* Reverse scaling of fixed-point fractional */ + mantissa += fractional / MAX44009_FRACT_MULT * + (MAX44009_SCALE_DENOMINATOR / MAX44009_SCALE_NUMERATOR); + + for (exp = 0; mantissa > 0xff; exp++) + mantissa >>= 1; + + mantissa >>= 4; + mantissa &= 0xf; + exp <<= 4; + + return exp | mantissa; +} + +static int max44009_get_thr_reg(enum iio_event_direction dir) +{ + switch (dir) { + case IIO_EV_DIR_RISING: + return MAX44009_REG_UPPER_THR; + case IIO_EV_DIR_FALLING: + return MAX44009_REG_LOWER_THR; + default: + return -EINVAL; + } +} + +static int max44009_write_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct max44009_data *data = iio_priv(indio_dev); + int reg, threshold; + + if (info != IIO_EV_INFO_VALUE || chan->type != IIO_LIGHT) + return -EINVAL; + + threshold = max44009_threshold_byte_from_fraction(val, val2); + if (threshold < 0) + return threshold; + + reg = max44009_get_thr_reg(dir); + if (reg < 0) + return reg; + + return i2c_smbus_write_byte_data(data->client, reg, threshold); +} + +static int max44009_read_threshold(struct iio_dev *indio_dev, + enum iio_event_direction dir) +{ + struct max44009_data *data = iio_priv(indio_dev); + int byte, reg; + int mantissa, exponent; + + reg = max44009_get_thr_reg(dir); + if (reg < 0) + return reg; + + byte = i2c_smbus_read_byte_data(data->client, reg); + if (byte < 0) + return byte; + + mantissa = byte & MAX44009_THRESH_MANT_MASK; + mantissa <<= MAX44009_THRESH_MANT_LSHIFT; + + /* + * To get the upper threshold, always adds the minimum upper threshold + * value to the shifted byte value (see datasheet). + */ + if (dir == IIO_EV_DIR_RISING) + mantissa += MAX44009_UPPER_THR_MINIMUM; + + /* + * Exponent is base 2 to the power of the threshold exponent byte + * value + */ + exponent = byte & MAX44009_THRESH_EXP_MASK; + exponent >>= MAX44009_THRESH_EXP_RSHIFT; + + return (1 << exponent) * mantissa; +} + +static int max44009_read_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + int ret; + int threshold; + + if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + ret = max44009_read_threshold(indio_dev, dir); + if (ret < 0) + return ret; + threshold = ret; + + *val = threshold * MAX44009_SCALE_NUMERATOR; + *val2 = MAX44009_SCALE_DENOMINATOR; + + return IIO_VAL_FRACTIONAL; +} + +static int max44009_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct max44009_data *data = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + ret = i2c_smbus_write_byte_data(data->client, + MAX44009_REG_INT_EN, state); + if (ret < 0) + return ret; + + /* + * Set device to trigger interrupt immediately upon exceeding + * the threshold limit. + */ + return i2c_smbus_write_byte_data(data->client, + MAX44009_REG_THR_TIMER, 0); +} + +static int max44009_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct max44009_data *data = iio_priv(indio_dev); + + if (chan->type != IIO_LIGHT || type != IIO_EV_TYPE_THRESH) + return -EINVAL; + + return i2c_smbus_read_byte_data(data->client, MAX44009_REG_INT_EN); +} + +static const struct iio_info max44009_info = { + .read_raw = max44009_read_raw, + .write_raw = max44009_write_raw, + .write_raw_get_fmt = max44009_write_raw_get_fmt, + .read_event_value = max44009_read_event_value, + .read_event_config = max44009_read_event_config, + .write_event_value = max44009_write_event_value, + .write_event_config = max44009_write_event_config, + .attrs = &max44009_attribute_group, +}; + +static irqreturn_t max44009_threaded_irq_handler(int irq, void *p) +{ + struct iio_dev *indio_dev = p; + struct max44009_data *data = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_byte_data(data->client, MAX44009_REG_INT_STATUS); + if (ret) { + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_EITHER), + iio_get_time_ns(indio_dev)); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int max44009_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max44009_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + indio_dev->dev.parent = &client->dev; + indio_dev->info = &max44009_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = MAX44009_DRV_NAME; + indio_dev->channels = max44009_channels; + indio_dev->num_channels = ARRAY_SIZE(max44009_channels); + mutex_init(&data->lock); + + /* Clear any stale interrupt bit */ + ret = i2c_smbus_read_byte_data(client, MAX44009_REG_CFG); + if (ret < 0) + return ret; + + if (client->irq > 0) { + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, + max44009_threaded_irq_handler, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT | IRQF_SHARED, + "max44009_event", + indio_dev); + if (ret < 0) + return ret; + } + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id max44009_id[] = { + { "max44009", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max44009_id); + +static struct i2c_driver max44009_driver = { + .driver = { + .name = MAX44009_DRV_NAME, + }, + .probe = max44009_probe, + .id_table = max44009_id, +}; +module_i2c_driver(max44009_driver); + +static const struct of_device_id max44009_of_match[] = { + { .compatible = "maxim,max44009" }, + { } +}; +MODULE_DEVICE_TABLE(of, max44009_of_match); + +MODULE_AUTHOR("Robert Eshleman <bobbyeshleman@gmail.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MAX44009 ambient light sensor driver"); diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c index f063355480ba..dd990cdb04a8 100644 --- a/drivers/iio/magnetometer/mag3110.c +++ b/drivers/iio/magnetometer/mag3110.c @@ -20,6 +20,7 @@ #include <linux/iio/buffer.h> #include <linux/iio/triggered_buffer.h> #include <linux/delay.h> +#include <linux/regulator/consumer.h> #define MAG3110_STATUS 0x00 #define MAG3110_OUT_X 0x01 /* MSB first */ @@ -56,6 +57,8 @@ struct mag3110_data { struct mutex lock; u8 ctrl_reg1; int sleep_val; + struct regulator *vdd_reg; + struct regulator *vddio_reg; }; static int mag3110_request(struct mag3110_data *data) @@ -469,17 +472,50 @@ static int mag3110_probe(struct i2c_client *client, struct iio_dev *indio_dev; int ret; - ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I); - if (ret < 0) - return ret; - if (ret != MAG3110_DEVICE_ID) - return -ENODEV; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); + + data->vdd_reg = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(data->vdd_reg)) { + if (PTR_ERR(data->vdd_reg) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_err(&client->dev, "failed to get VDD regulator!\n"); + return PTR_ERR(data->vdd_reg); + } + + data->vddio_reg = devm_regulator_get(&client->dev, "vddio"); + if (IS_ERR(data->vddio_reg)) { + if (PTR_ERR(data->vddio_reg) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_err(&client->dev, "failed to get VDDIO regulator!\n"); + return PTR_ERR(data->vddio_reg); + } + + ret = regulator_enable(data->vdd_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VDD regulator!\n"); + return ret; + } + + ret = regulator_enable(data->vddio_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VDDIO regulator!\n"); + goto disable_regulator_vdd; + } + + ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I); + if (ret < 0) + goto disable_regulators; + if (ret != MAG3110_DEVICE_ID) { + ret = -ENODEV; + goto disable_regulators; + } + data->client = client; mutex_init(&data->lock); @@ -499,7 +535,7 @@ static int mag3110_probe(struct i2c_client *client, ret = mag3110_change_config(data, MAG3110_CTRL_REG1, data->ctrl_reg1); if (ret < 0) - return ret; + goto disable_regulators; ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2, MAG3110_CTRL_AUTO_MRST_EN); @@ -520,16 +556,24 @@ buffer_cleanup: iio_triggered_buffer_cleanup(indio_dev); standby_on_error: mag3110_standby(iio_priv(indio_dev)); +disable_regulators: + regulator_disable(data->vddio_reg); +disable_regulator_vdd: + regulator_disable(data->vdd_reg); + return ret; } static int mag3110_remove(struct i2c_client *client) { struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct mag3110_data *data = iio_priv(indio_dev); iio_device_unregister(indio_dev); iio_triggered_buffer_cleanup(indio_dev); mag3110_standby(iio_priv(indio_dev)); + regulator_disable(data->vddio_reg); + regulator_disable(data->vdd_reg); return 0; } @@ -537,14 +581,48 @@ static int mag3110_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int mag3110_suspend(struct device *dev) { - return mag3110_standby(iio_priv(i2c_get_clientdata( + struct mag3110_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + int ret; + + ret = mag3110_standby(iio_priv(i2c_get_clientdata( to_i2c_client(dev)))); + if (ret) + return ret; + + ret = regulator_disable(data->vddio_reg); + if (ret) { + dev_err(dev, "failed to disable VDDIO regulator\n"); + return ret; + } + + ret = regulator_disable(data->vdd_reg); + if (ret) { + dev_err(dev, "failed to disable VDD regulator\n"); + return ret; + } + + return 0; } static int mag3110_resume(struct device *dev) { struct mag3110_data *data = iio_priv(i2c_get_clientdata( to_i2c_client(dev))); + int ret; + + ret = regulator_enable(data->vdd_reg); + if (ret) { + dev_err(dev, "failed to enable VDD regulator\n"); + return ret; + } + + ret = regulator_enable(data->vddio_reg); + if (ret) { + dev_err(dev, "failed to enable VDDIO regulator\n"); + regulator_disable(data->vdd_reg); + return ret; + } return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1, data->ctrl_reg1); diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index eaa7cfcb4c2a..efeb89f3df71 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -165,7 +165,7 @@ config IIO_ST_PRESS select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics pressure - sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB. + sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. This driver can also be built as a module. If so, these modules will be created: diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h index e67eb0d971bf..57946605f3ba 100644 --- a/drivers/iio/pressure/st_pressure.h +++ b/drivers/iio/pressure/st_pressure.h @@ -21,6 +21,7 @@ enum st_press_type { LPS22HB, LPS33HW, LPS35HW, + LPS22HH, ST_PRESS_MAX, }; @@ -30,6 +31,7 @@ enum st_press_type { #define LPS22HB_PRESS_DEV_NAME "lps22hb" #define LPS33HW_PRESS_DEV_NAME "lps33hw" #define LPS35HW_PRESS_DEV_NAME "lps35hw" +#define LPS22HH_PRESS_DEV_NAME "lps22hh" /** * struct st_sensors_platform_data - default press platform data diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 4ddb6cf7d401..38dcdb7c000e 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -492,6 +492,75 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .multi_read_bit = false, .bootime = 2, }, + { + /* + * CUSTOM VALUES FOR LPS22HH SENSOR + * See LPS22HH datasheet: + * http://www2.st.com/resource/en/datasheet/lps22hh.pdf + */ + .wai = 0xb3, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LPS22HH_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_lps22hb_channels, + .num_ch = ARRAY_SIZE(st_press_lps22hb_channels), + .odr = { + .addr = 0x10, + .mask = 0x70, + .odr_avl = { + { .hz = 1, .value = 0x01 }, + { .hz = 10, .value = 0x02 }, + { .hz = 25, .value = 0x03 }, + { .hz = 50, .value = 0x04 }, + { .hz = 75, .value = 0x05 }, + { .hz = 100, .value = 0x06 }, + { .hz = 200, .value = 0x07 }, + }, + }, + .pw = { + .addr = 0x10, + .mask = 0x70, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .fs_avl = { + /* + * Pressure and temperature sensitivity values + * as defined in table 3 of LPS22HH datasheet. + */ + [0] = { + .num = ST_PRESS_FS_AVL_1260MB, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + .gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS, + }, + }, + }, + .bdu = { + .addr = 0x10, + .mask = BIT(1), + }, + .drdy_irq = { + .int1 = { + .addr = 0x12, + .mask = BIT(2), + .addr_od = 0x11, + .mask_od = BIT(5), + }, + .addr_ihl = 0x11, + .mask_ihl = BIT(6), + .stat_drdy = { + .addr = ST_SENSORS_DEFAULT_STAT_ADDR, + .mask = 0x03, + }, + }, + .sim = { + .addr = 0x10, + .value = BIT(0), + }, + .multi_read_bit = false, + .bootime = 2, + }, }; static int st_press_write_raw(struct iio_dev *indio_dev, diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c index 2026a1012012..a60849dd4ea7 100644 --- a/drivers/iio/pressure/st_pressure_i2c.c +++ b/drivers/iio/pressure/st_pressure_i2c.c @@ -45,6 +45,10 @@ static const struct of_device_id st_press_of_match[] = { .compatible = "st,lps35hw", .data = LPS35HW_PRESS_DEV_NAME, }, + { + .compatible = "st,lps22hh", + .data = LPS22HH_PRESS_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_press_of_match); @@ -69,6 +73,7 @@ static const struct i2c_device_id st_press_id_table[] = { { LPS22HB_PRESS_DEV_NAME, LPS22HB }, { LPS33HW_PRESS_DEV_NAME, LPS33HW }, { LPS35HW_PRESS_DEV_NAME, LPS35HW }, + { LPS22HH_PRESS_DEV_NAME, LPS22HH }, {}, }; MODULE_DEVICE_TABLE(i2c, st_press_id_table); diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c index 9a3441b128e7..79a12ed46e54 100644 --- a/drivers/iio/pressure/st_pressure_spi.c +++ b/drivers/iio/pressure/st_pressure_spi.c @@ -49,6 +49,10 @@ static const struct of_device_id st_press_of_match[] = { .compatible = "st,lps35hw", .data = LPS35HW_PRESS_DEV_NAME, }, + { + .compatible = "st,lps22hh", + .data = LPS22HH_PRESS_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_press_of_match); @@ -93,6 +97,7 @@ static const struct spi_device_id st_press_id_table[] = { { LPS22HB_PRESS_DEV_NAME }, { LPS33HW_PRESS_DEV_NAME }, { LPS35HW_PRESS_DEV_NAME }, + { LPS22HH_PRESS_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(spi, st_press_id_table); |