diff options
Diffstat (limited to 'drivers/infiniband/hw/hfi1/chip.c')
| -rw-r--r-- | drivers/infiniband/hw/hfi1/chip.c | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index c87b94ea2939..993cbf37e0b9 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -1323,8 +1323,8 @@ CNTR_ELEM(#name, \ /** * hfi_addr_from_offset - return addr for readq/writeq - * @dd - the dd device - * @offset - the offset of the CSR within bar0 + * @dd: the dd device + * @offset: the offset of the CSR within bar0 * * This routine selects the appropriate base address * based on the indicated offset. @@ -1340,8 +1340,8 @@ static inline void __iomem *hfi1_addr_from_offset( /** * read_csr - read CSR at the indicated offset - * @dd - the dd device - * @offset - the offset of the CSR within bar0 + * @dd: the dd device + * @offset: the offset of the CSR within bar0 * * Return: the value read or all FF's if there * is no mapping @@ -1355,9 +1355,9 @@ u64 read_csr(const struct hfi1_devdata *dd, u32 offset) /** * write_csr - write CSR at the indicated offset - * @dd - the dd device - * @offset - the offset of the CSR within bar0 - * @value - value to write + * @dd: the dd device + * @offset: the offset of the CSR within bar0 + * @value: value to write */ void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value) { @@ -1373,8 +1373,8 @@ void write_csr(const struct hfi1_devdata *dd, u32 offset, u64 value) /** * get_csr_addr - return te iomem address for offset - * @dd - the dd device - * @offset - the offset of the CSR within bar0 + * @dd: the dd device + * @offset: the offset of the CSR within bar0 * * Return: The iomem address to use in subsequent * writeq/readq operations. @@ -8433,7 +8433,7 @@ static inline int check_packet_present(struct hfi1_ctxtdata *rcd) return hfi1_rcd_head(rcd) != tail; } -/** +/* * Common code for receive contexts interrupt handlers. * Update traces, increment kernel IRQ counter and * setup ASPM when needed. @@ -8447,7 +8447,7 @@ static void receive_interrupt_common(struct hfi1_ctxtdata *rcd) aspm_ctx_disable(rcd); } -/** +/* * __hfi1_rcd_eoi_intr() - Make HW issue receive interrupt * when there are packets present in the queue. When calling * with interrupts enabled please use hfi1_rcd_eoi_intr. @@ -8484,8 +8484,8 @@ static void hfi1_rcd_eoi_intr(struct hfi1_ctxtdata *rcd) /** * hfi1_netdev_rx_napi - napi poll function to move eoi inline - * @napi - pointer to napi object - * @budget - netdev budget + * @napi: pointer to napi object + * @budget: netdev budget */ int hfi1_netdev_rx_napi(struct napi_struct *napi, int budget) { @@ -10142,7 +10142,7 @@ u32 lrh_max_header_bytes(struct hfi1_devdata *dd) /* * Set Send Length - * @ppd - per port data + * @ppd: per port data * * Set the MTU by limiting how many DWs may be sent. The SendLenCheck* * registers compare against LRH.PktLen, so use the max bytes included @@ -14200,9 +14200,9 @@ u8 hfi1_get_qp_map(struct hfi1_devdata *dd, u8 idx) /** * init_qpmap_table - * @dd - device data - * @first_ctxt - first context - * @last_ctxt - first context + * @dd: device data + * @first_ctxt: first context + * @last_ctxt: first context * * This return sets the qpn mapping table that * is indexed by qpn[8:1]. @@ -14383,8 +14383,8 @@ no_qos: /** * init_qos - init RX qos - * @dd - device data - * @rmt - RSM map table + * @dd: device data + * @rmt: RSM map table * * This routine initializes Rule 0 and the RSM map table to implement * quality of service (qos). @@ -15022,8 +15022,7 @@ err_exit: /** * hfi1_init_dd() - Initialize most of the dd structure. - * @dev: the pci_dev for hfi1_ib device - * @ent: pci_device_id struct for this dev + * @dd: the dd device * * This is global, and is called directly at init to set up the * chip-specific function pointers for later use. @@ -15378,10 +15377,11 @@ static u16 delay_cycles(struct hfi1_pportdata *ppd, u32 desired_egress_rate, /** * create_pbc - build a pbc for transmission + * @ppd: info of physical Hfi port * @flags: special case flags or-ed in built pbc - * @srate: static rate + * @srate_mbs: static rate * @vl: vl - * @dwlen: dword length (header words + data words + pbc words) + * @dw_len: dword length (header words + data words + pbc words) * * Create a PBC with the given flags, rate, VL, and length. * |