aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/keyboard
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/keyboard')
-rw-r--r--drivers/input/keyboard/adp5588-keys.c74
-rw-r--r--drivers/input/keyboard/atkbd.c12
2 files changed, 36 insertions, 50 deletions
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index b92d1cd5cba1..af45d275f686 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -4,7 +4,7 @@
* I2C QWERTY Keypad and IO Expander
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Copyright (C) 2008-2010 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -24,29 +24,6 @@
#include <linux/i2c/adp5588.h>
- /* Configuration Register1 */
-#define AUTO_INC (1 << 7)
-#define GPIEM_CFG (1 << 6)
-#define OVR_FLOW_M (1 << 5)
-#define INT_CFG (1 << 4)
-#define OVR_FLOW_IEN (1 << 3)
-#define K_LCK_IM (1 << 2)
-#define GPI_IEN (1 << 1)
-#define KE_IEN (1 << 0)
-
-/* Interrupt Status Register */
-#define CMP2_INT (1 << 5)
-#define CMP1_INT (1 << 4)
-#define OVR_FLOW_INT (1 << 3)
-#define K_LCK_INT (1 << 2)
-#define GPI_INT (1 << 1)
-#define KE_INT (1 << 0)
-
-/* Key Lock and Event Counter Register */
-#define K_LCK_EN (1 << 6)
-#define LCK21 0x30
-#define KEC 0xF
-
/* Key Event Register xy */
#define KEY_EV_PRESSED (1 << 7)
#define KEY_EV_MASK (0x7F)
@@ -55,10 +32,6 @@
#define KEYP_MAX_EVENT 10
-#define MAXGPIO 18
-#define ADP_BANK(offs) ((offs) >> 3)
-#define ADP_BIT(offs) (1u << ((offs) & 0x7))
-
/*
* Early pre 4.0 Silicon required to delay readout by at least 25ms,
* since the Event Counter Register updated 25ms after the interrupt
@@ -75,7 +48,7 @@ struct adp5588_kpad {
const struct adp5588_gpi_map *gpimap;
unsigned short gpimapsize;
#ifdef CONFIG_GPIOLIB
- unsigned char gpiomap[MAXGPIO];
+ unsigned char gpiomap[ADP5588_MAXGPIO];
bool export_gpio;
struct gpio_chip gc;
struct mutex gpio_lock; /* Protect cached dir, dat_out */
@@ -103,8 +76,8 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
}
@@ -113,8 +86,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
unsigned off, int val)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
mutex_lock(&kpad->gpio_lock);
@@ -132,8 +105,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
@@ -150,8 +123,8 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
unsigned off, int val)
{
struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
- unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
- unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+ unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+ unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
int ret;
mutex_lock(&kpad->gpio_lock);
@@ -176,7 +149,7 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
const struct adp5588_kpad_platform_data *pdata)
{
- bool pin_used[MAXGPIO];
+ bool pin_used[ADP5588_MAXGPIO];
int n_unused = 0;
int i;
@@ -191,7 +164,7 @@ static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
for (i = 0; i < kpad->gpimapsize; i++)
pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
- for (i = 0; i < MAXGPIO; i++)
+ for (i = 0; i < ADP5588_MAXGPIO; i++)
if (!pin_used[i])
kpad->gpiomap[n_unused++] = i;
@@ -234,7 +207,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
return error;
}
- for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
kpad->dat_out[i] = adp5588_read(kpad->client,
GPIO_DAT_OUT1 + i);
kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
@@ -318,11 +291,11 @@ static void adp5588_work(struct work_struct *work)
status = adp5588_read(client, INT_STAT);
- if (status & OVR_FLOW_INT) /* Unlikely and should never happen */
+ if (status & ADP5588_OVR_FLOW_INT) /* Unlikely and should never happen */
dev_err(&client->dev, "Event Overflow Error\n");
- if (status & KE_INT) {
- ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
+ if (status & ADP5588_KE_INT) {
+ ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
if (ev_cnt) {
adp5588_report_events(kpad, ev_cnt);
input_sync(kpad->input);
@@ -360,7 +333,7 @@ static int __devinit adp5588_setup(struct i2c_client *client)
if (pdata->en_keylock) {
ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
- ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
+ ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
}
for (i = 0; i < KEYP_MAX_EVENT; i++)
@@ -384,7 +357,7 @@ static int __devinit adp5588_setup(struct i2c_client *client)
}
if (gpio_data) {
- for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+ for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
int pull_mask = gpio_data->pullup_dis_mask;
ret |= adp5588_write(client, GPIO_PULL1 + i,
@@ -392,11 +365,14 @@ static int __devinit adp5588_setup(struct i2c_client *client)
}
}
- ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
- OVR_FLOW_INT | K_LCK_INT |
- GPI_INT | KE_INT); /* Status is W1C */
+ ret |= adp5588_write(client, INT_STAT,
+ ADP5588_CMP2_INT | ADP5588_CMP1_INT |
+ ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
+ ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */
- ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
+ ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
+ ADP5588_OVR_FLOW_IEN |
+ ADP5588_KE_IEN);
if (ret < 0) {
dev_err(&client->dev, "Write Error\n");
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index d358ef8623f4..11478eb2c27d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -63,6 +63,10 @@ static bool atkbd_extra;
module_param_named(extra, atkbd_extra, bool, 0);
MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+static bool atkbd_terminal;
+module_param_named(terminal, atkbd_terminal, bool, 0);
+MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+
/*
* Scancode to keycode tables. These are just the default setting, and
* are loadable via a userland utility.
@@ -136,7 +140,8 @@ static const unsigned short atkbd_unxlate_table[128] = {
#define ATKBD_CMD_ENABLE 0x00f4
#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */
#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */
-#define ATKBD_CMD_SETALL_MBR 0x00fa
+#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */
+#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */
#define ATKBD_CMD_RESET_BAT 0x02ff
#define ATKBD_CMD_RESEND 0x00fe
#define ATKBD_CMD_EX_ENABLE 0x10ea
@@ -764,6 +769,11 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
}
}
+ if (atkbd_terminal) {
+ ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
+ return 3;
+ }
+
if (target_set != 3)
return 2;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.