diff options
Diffstat (limited to 'drivers/input/serio')
| -rw-r--r-- | drivers/input/serio/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/input/serio/ams_delta_serio.c | 198 | ||||
| -rw-r--r-- | drivers/input/serio/hyperv-keyboard.c | 3 |
3 files changed, 106 insertions, 99 deletions
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index ca4530eb3378..d90d9f1098ff 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -47,7 +47,7 @@ config SERIO_SERPORT Say Y here if you plan to use an input device (mouse, joystick, tablet, 6dof) that communicates over the RS232 serial (COM) port. - More information is available: <file:Documentation/input/input.txt> + More information is available: <file:Documentation/input/input.rst> If unsure, say Y. @@ -78,7 +78,7 @@ config SERIO_PARKBD Say Y here if you built a simple parallel port adapter to attach an additional AT keyboard, XT keyboard or PS/2 mouse. - More information is available: <file:Documentation/input/input.txt> + More information is available: <file:Documentation/input/input.rst> If unsure, say N. diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 3df501c3421b..f8663d7891f2 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -20,32 +20,33 @@ * However, when used with the E3 mailboard that producecs non-standard * scancodes, a custom key table must be prepared and loaded from userspace. */ -#include <linux/gpio.h> #include <linux/irq.h> +#include <linux/platform_data/ams-delta-fiq.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/serio.h> #include <linux/slab.h> #include <linux/module.h> -#include <asm/mach-types.h> -#include <mach/board-ams-delta.h> - -#include <mach/ams-delta-fiq.h> +#define DRIVER_NAME "ams-delta-serio" MODULE_AUTHOR("Matt Callow"); MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver"); MODULE_LICENSE("GPL"); -static struct serio *ams_delta_serio; +struct ams_delta_serio { + struct serio *serio; + struct regulator *vcc; + unsigned int *fiq_buffer; +}; -static int check_data(int data) +static int check_data(struct serio *serio, int data) { int i, parity = 0; /* check valid stop bit */ if (!(data & 0x400)) { - dev_warn(&ams_delta_serio->dev, - "invalid stop bit, data=0x%X\n", - data); + dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data); return SERIO_FRAME; } /* calculate the parity */ @@ -55,9 +56,9 @@ static int check_data(int data) } /* it should be odd */ if (!(parity & 0x01)) { - dev_warn(&ams_delta_serio->dev, - "parity check failed, data=0x%X parity=0x%X\n", - data, parity); + dev_warn(&serio->dev, + "parity check failed, data=0x%X parity=0x%X\n", data, + parity); return SERIO_PARITY; } return 0; @@ -65,127 +66,130 @@ static int check_data(int data) static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) { - int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF]; + struct ams_delta_serio *priv = dev_id; + int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF]; int data, dfl; u8 scancode; - fiq_buffer[FIQ_IRQ_PEND] = 0; + priv->fiq_buffer[FIQ_IRQ_PEND] = 0; /* * Read data from the circular buffer, check it * and then pass it on the serio */ - while (fiq_buffer[FIQ_KEYS_CNT] > 0) { + while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) { - data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++]; - fiq_buffer[FIQ_KEYS_CNT]--; - if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN]) - fiq_buffer[FIQ_HEAD_OFFSET] = 0; + data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++]; + priv->fiq_buffer[FIQ_KEYS_CNT]--; + if (priv->fiq_buffer[FIQ_HEAD_OFFSET] == + priv->fiq_buffer[FIQ_BUF_LEN]) + priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0; - dfl = check_data(data); + dfl = check_data(priv->serio, data); scancode = (u8) (data >> 1) & 0xFF; - serio_interrupt(ams_delta_serio, scancode, dfl); + serio_interrupt(priv->serio, scancode, dfl); } return IRQ_HANDLED; } static int ams_delta_serio_open(struct serio *serio) { - /* enable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1); + struct ams_delta_serio *priv = serio->port_data; - return 0; + /* enable keyboard */ + return regulator_enable(priv->vcc); } static void ams_delta_serio_close(struct serio *serio) { + struct ams_delta_serio *priv = serio->port_data; + /* disable keyboard */ - gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0); + regulator_disable(priv->vcc); } -static const struct gpio ams_delta_gpios[] __initconst_or_module = { - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATA, - .flags = GPIOF_DIR_IN, - .label = "serio-data", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK, - .flags = GPIOF_DIR_IN, - .label = "serio-clock", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-power", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-dataout", - }, -}; - -static int __init ams_delta_serio_init(void) +static int ams_delta_serio_init(struct platform_device *pdev) { - int err; - - if (!machine_is_ams_delta()) - return -ENODEV; + struct ams_delta_serio *priv; + struct serio *serio; + int irq, err; - ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL); - if (!ams_delta_serio) + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) return -ENOMEM; - ams_delta_serio->id.type = SERIO_8042; - ams_delta_serio->open = ams_delta_serio_open; - ams_delta_serio->close = ams_delta_serio_close; - strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter", - sizeof(ams_delta_serio->name)); - strlcpy(ams_delta_serio->phys, "GPIO/serio0", - sizeof(ams_delta_serio->phys)); - - err = gpio_request_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); - if (err) { - pr_err("ams_delta_serio: Couldn't request gpio pins\n"); - goto serio; + priv->fiq_buffer = pdev->dev.platform_data; + if (!priv->fiq_buffer) + return -EINVAL; + + priv->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(priv->vcc)) { + err = PTR_ERR(priv->vcc); + dev_err(&pdev->dev, "regulator request failed (%d)\n", err); + /* + * When running on a non-dt platform and requested regulator + * is not available, devm_regulator_get() never returns + * -EPROBE_DEFER as it is not able to justify if the regulator + * may still appear later. On the other hand, the board can + * still set full constriants flag at late_initcall in order + * to instruct devm_regulator_get() to returnn a dummy one + * if sufficient. Hence, if we get -ENODEV here, let's convert + * it to -EPROBE_DEFER and wait for the board to decide or + * let Deferred Probe infrastructure handle this error. + */ + if (err == -ENODEV) + err = -EPROBE_DEFER; + return err; } - err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), - ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING, - "ams-delta-serio", 0); + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENXIO; + + err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt, + IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv); if (err < 0) { - pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n", - gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); - goto gpio; + dev_err(&pdev->dev, "IRQ request failed (%d)\n", err); + return err; } - /* - * Since GPIO register handling for keyboard clock pin is performed - * at FIQ level, switch back from edge to simple interrupt handler - * to avoid bad interaction. - */ - irq_set_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), - handle_simple_irq); - serio_register_port(ams_delta_serio); - dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name); + serio = kzalloc(sizeof(*serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + priv->serio = serio; + + serio->id.type = SERIO_8042; + serio->open = ams_delta_serio_open; + serio->close = ams_delta_serio_close; + strlcpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name)); + strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys)); + serio->dev.parent = &pdev->dev; + serio->port_data = priv; + + serio_register_port(serio); + + platform_set_drvdata(pdev, priv); + + dev_info(&serio->dev, "%s\n", serio->name); return 0; -gpio: - gpio_free_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); -serio: - kfree(ams_delta_serio); - return err; } -module_init(ams_delta_serio_init); -static void __exit ams_delta_serio_exit(void) +static int ams_delta_serio_exit(struct platform_device *pdev) { - serio_unregister_port(ams_delta_serio); - free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); - gpio_free_array(ams_delta_gpios, - ARRAY_SIZE(ams_delta_gpios)); + struct ams_delta_serio *priv = platform_get_drvdata(pdev); + + serio_unregister_port(priv->serio); + + return 0; } -module_exit(ams_delta_serio_exit); + +static struct platform_driver ams_delta_serio_driver = { + .probe = ams_delta_serio_init, + .remove = ams_delta_serio_exit, + .driver = { + .name = DRIVER_NAME + }, +}; +module_platform_driver(ams_delta_serio_driver); diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c index 25151d9214e0..47a0e81a2989 100644 --- a/drivers/input/serio/hyperv-keyboard.c +++ b/drivers/input/serio/hyperv-keyboard.c @@ -424,6 +424,9 @@ static struct hv_driver hv_kbd_drv = { .id_table = id_table, .probe = hv_kbd_probe, .remove = hv_kbd_remove, + .driver = { + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, }; static int __init hv_kbd_init(void) |