3 files changed, 273 insertions, 51 deletions

diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 0d3219f29744..858ad446de91 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -172,6 +172,76 @@ static void wacom_close(struct input_dev *dev)
 }
 
 /*
+ * Calculate the resolution of the X or Y axis, given appropriate HID data.
+ * This function is little more than hidinput_calc_abs_res stripped down.
+ */
+static int wacom_calc_hid_res(int logical_extents, int physical_extents,
+                              unsigned char unit, unsigned char exponent)
+{
+	int prev, unit_exponent;
+
+	/* Check if the extents are sane */
+	if (logical_extents <= 0 || physical_extents <= 0)
+		return 0;
+
+	/* Get signed value of nybble-sized twos-compliment exponent */
+	unit_exponent = exponent;
+	if (unit_exponent > 7)
+		unit_exponent -= 16;
+
+	/* Convert physical_extents to millimeters */
+	if (unit == 0x11) {		/* If centimeters */
+		unit_exponent += 1;
+	} else if (unit == 0x13) {	/* If inches */
+		prev = physical_extents;
+		physical_extents *= 254;
+		if (physical_extents < prev)
+			return 0;
+		unit_exponent -= 1;
+	} else {
+		return 0;
+	}
+
+	/* Apply negative unit exponent */
+	for (; unit_exponent < 0; unit_exponent++) {
+		prev = logical_extents;
+		logical_extents *= 10;
+		if (logical_extents < prev)
+			return 0;
+	}
+	/* Apply positive unit exponent */
+	for (; unit_exponent > 0; unit_exponent--) {
+		prev = physical_extents;
+		physical_extents *= 10;
+		if (physical_extents < prev)
+			return 0;
+	}
+
+	/* Calculate resolution */
+	return logical_extents / physical_extents;
+}
+
+/*
+ * The physical dimension specified by the HID descriptor is likely not in
+ * the "100th of a mm" units expected by wacom_calculate_touch_res. This
+ * function adjusts the value of [xy]_phy based on the unit and exponent
+ * provided by the HID descriptor. If an error occurs durring conversion
+ * (e.g. from the unit being left unspecified) [xy]_phy is not modified.
+ */
+static void wacom_fix_phy_from_hid(struct wacom_features *features)
+{
+	int xres = wacom_calc_hid_res(features->x_max, features->x_phy,
+					features->unit, features->unitExpo);
+	int yres = wacom_calc_hid_res(features->y_max, features->y_phy,
+					features->unit, features->unitExpo);
+
+	if (xres > 0 && yres > 0) {
+		features->x_phy = (100 * features->x_max) / xres;
+		features->y_phy = (100 * features->y_max) / yres;
+	}
+}
+
+/*
  * Static values for max X/Y and resolution of Pen interface is stored in
  * features. This mean physical size of active area can be computed.
  * This is useful to do when Pen and Touch have same active area of tablet.
@@ -321,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf,
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
 						}
 
-						if (features->type == MTSCREEN)
+						if (features->type == MTSCREEN || features->type == WACOM_24HDT)
 							features->pktlen = WACOM_PKGLEN_MTOUCH;
 
 						if (features->type == BAMBOO_PT) {
@@ -332,6 +402,14 @@ static int wacom_parse_hid(struct usb_interface *intf,
 							features->x_max =
 								get_unaligned_le16(&report[i + 8]);
 							i += 15;
+						} else if (features->type == WACOM_24HDT) {
+							features->x_max =
+								get_unaligned_le16(&report[i + 3]);
+							features->x_phy =
+								get_unaligned_le16(&report[i + 8]);
+							features->unit = report[i - 1];
+							features->unitExpo = report[i - 3];
+							i += 12;
 						} else {
 							features->x_max =
 								get_unaligned_le16(&report[i + 3]);
@@ -364,6 +442,12 @@ static int wacom_parse_hid(struct usb_interface *intf,
 							features->y_phy =
 								get_unaligned_le16(&report[i + 6]);
 							i += 7;
+						} else if (type == WACOM_24HDT) {
+							features->y_max =
+								get_unaligned_le16(&report[i + 3]);
+							features->y_phy =
+								get_unaligned_le16(&report[i - 2]);
+							i += 7;
 						} else if (type == BAMBOO_PT) {
 							features->y_phy =
 								get_unaligned_le16(&report[i + 3]);
@@ -432,56 +516,55 @@ static int wacom_parse_hid(struct usb_interface *intf,
 	return result;
 }
 
-static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features)
+static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int length, int mode)
 {
 	unsigned char *rep_data;
-	int limit = 0, report_id = 2;
-	int error = -ENOMEM;
+	int error = -ENOMEM, limit = 0;
 
-	rep_data = kmalloc(4, GFP_KERNEL);
+	rep_data = kzalloc(length, GFP_KERNEL);
 	if (!rep_data)
 		return error;
 
-	/* ask to report Wacom data */
+	rep_data[0] = report_id;
+	rep_data[1] = mode;
+
+	do {
+		error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
+		                         report_id, rep_data, length, 1);
+		if (error >= 0)
+			error = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
+			                         report_id, rep_data, length, 1);
+	} while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES);
+
+	kfree(rep_data);
+
+	return error < 0 ? error : 0;
+}
+
+/*
+ * Switch the tablet into its most-capable mode. Wacom tablets are
+ * typically configured to power-up in a mode which sends mouse-like
+ * reports to the OS. To get absolute position, pressure data, etc.
+ * from the tablet, it is necessary to switch the tablet out of this
+ * mode and into one which sends the full range of tablet data.
+ */
+static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features)
+{
 	if (features->device_type == BTN_TOOL_FINGER) {
-		/* if it is an MT Tablet PC touch */
 		if (features->type > TABLETPC) {
-			do {
-				rep_data[0] = 3;
-				rep_data[1] = 4;
-				rep_data[2] = 0;
-				rep_data[3] = 0;
-				report_id = 3;
-				error = wacom_set_report(intf,
-							 WAC_HID_FEATURE_REPORT,
-							 report_id,
-							 rep_data, 4, 1);
-				if (error >= 0)
-					error = wacom_get_report(intf,
-							WAC_HID_FEATURE_REPORT,
-							report_id,
-							rep_data, 4, 1);
-			} while ((error < 0 || rep_data[1] != 4) &&
-				 limit++ < WAC_MSG_RETRIES);
+			/* MT Tablet PC touch */
+			return wacom_set_device_mode(intf, 3, 4, 4);
+		}
+		else if (features->type == WACOM_24HDT) {
+			return wacom_set_device_mode(intf, 18, 3, 2);
+		}
+	} else if (features->device_type == BTN_TOOL_PEN) {
+		if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
+			return wacom_set_device_mode(intf, 2, 2, 2);
 		}
-	} else if (features->type <= BAMBOO_PT &&
-		   features->type != WIRELESS &&
-		   features->device_type == BTN_TOOL_PEN) {
-		do {
-			rep_data[0] = 2;
-			rep_data[1] = 2;
-			error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
-						 report_id, rep_data, 2, 1);
-			if (error >= 0)
-				error = wacom_get_report(intf,
-						WAC_HID_FEATURE_REPORT,
-						report_id, rep_data, 2, 1);
-		} while ((error < 0 || rep_data[1] != 2) && limit++ < WAC_MSG_RETRIES);
 	}
 
-	kfree(rep_data);
-
-	return error < 0 ? error : 0;
+	return 0;
 }
 
 static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
@@ -531,6 +614,7 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 	error = wacom_parse_hid(intf, hid_desc, features);
 	if (error)
 		goto out;
+	wacom_fix_phy_from_hid(features);
 
  out:
 	return error;
@@ -546,6 +630,30 @@ struct wacom_usbdev_data {
 static LIST_HEAD(wacom_udev_list);
 static DEFINE_MUTEX(wacom_udev_list_lock);
 
+static struct usb_device *wacom_get_sibling(struct usb_device *dev, int vendor, int product)
+{
+	int port1;
+	struct usb_device *sibling;
+
+	if (vendor == 0 && product == 0)
+		return dev;
+
+	if (dev->parent == NULL)
+		return NULL;
+
+	usb_hub_for_each_child(dev->parent, port1, sibling) {
+		struct usb_device_descriptor *d;
+		if (sibling == NULL)
+			continue;
+
+		d = &sibling->descriptor;
+		if (d->idVendor == vendor && d->idProduct == product)
+			return sibling;
+	}
+
+	return NULL;
+}
+
 static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev)
 {
 	struct wacom_usbdev_data *data;
@@ -1190,13 +1298,19 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
 
 	if (features->quirks & WACOM_QUIRK_MULTI_INPUT) {
+		struct usb_device *other_dev;
+
 		/* Append the device type to the name */
 		strlcat(wacom_wac->name,
 			features->device_type == BTN_TOOL_PEN ?
 				" Pen" : " Finger",
 			sizeof(wacom_wac->name));
 
-		error = wacom_add_shared_data(wacom_wac, dev);
+
+		other_dev = wacom_get_sibling(dev, features->oVid, features->oPid);
+		if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL)
+			other_dev = dev;
+		error = wacom_add_shared_data(wacom_wac, other_dev);
 		if (error)
 			goto fail3;
 	}
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 2a81ce375f75..0a67031ffc13 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -25,6 +25,11 @@
 #define WACOM_INTUOS_RES	100
 #define WACOM_INTUOS3_RES	200
 
+/* Scale factor relating reported contact size to logical contact area.
+ * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
+ */
+#define WACOM_CONTACT_AREA_SCALE 2607
+
 static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
 	unsigned char *data = wacom->data;
@@ -326,7 +331,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
-		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+		if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
 			wacom->shared->stylus_in_proximity = true;
 
 		/* serial number of the tool */
@@ -414,7 +419,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
-		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+		if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
 			wacom->shared->stylus_in_proximity = false;
 
 		/*
@@ -606,7 +611,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 				input_report_abs(input, ABS_WHEEL, 0);
 			}
 
-			if (data[2] | (data[3] & 0x01) | data[4]) {
+			if (data[2] | (data[3] & 0x01) | data[4] | data[5]) {
 				input_report_key(input, wacom->tool[1], 1);
 				input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
 			} else {
@@ -801,6 +806,70 @@ static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid)
 	return -1;
 }
 
+static int int_dist(int x1, int y1, int x2, int y2)
+{
+	int x = x2 - x1;
+	int y = y2 - y1;
+
+	return int_sqrt(x*x + y*y);
+}
+
+static int wacom_24hdt_irq(struct wacom_wac *wacom)
+{
+	struct input_dev *input = wacom->input;
+	char *data = wacom->data;
+	int i;
+	int current_num_contacts = data[61];
+	int contacts_to_send = 0;
+
+	/*
+	 * First packet resets the counter since only the first
+	 * packet in series will have non-zero current_num_contacts.
+	 */
+	if (current_num_contacts)
+		wacom->num_contacts_left = current_num_contacts;
+
+	/* There are at most 4 contacts per packet */
+	contacts_to_send = min(4, wacom->num_contacts_left);
+
+	for (i = 0; i < contacts_to_send; i++) {
+		int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1;
+		bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity;
+		int id = data[offset + 1];
+		int slot = find_slot_from_contactid(wacom, id);
+
+		if (slot < 0)
+			continue;
+		input_mt_slot(input, slot);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+
+		if (touch) {
+			int t_x = le16_to_cpup((__le16 *)&data[offset + 2]);
+			int c_x = le16_to_cpup((__le16 *)&data[offset + 4]);
+			int t_y = le16_to_cpup((__le16 *)&data[offset + 6]);
+			int c_y = le16_to_cpup((__le16 *)&data[offset + 8]);
+			int w = le16_to_cpup((__le16 *)&data[offset + 10]);
+			int h = le16_to_cpup((__le16 *)&data[offset + 12]);
+
+			input_report_abs(input, ABS_MT_POSITION_X, t_x);
+			input_report_abs(input, ABS_MT_POSITION_Y, t_y);
+			input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h));
+			input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y));
+			input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
+			input_report_abs(input, ABS_MT_ORIENTATION, w > h);
+		}
+		wacom->slots[slot] = touch ? id : -1;
+	}
+
+	input_mt_report_pointer_emulation(input, true);
+
+	wacom->num_contacts_left -= contacts_to_send;
+	if (wacom->num_contacts_left <= 0)
+		wacom->num_contacts_left = 0;
+
+	return 1;
+}
+
 static int wacom_mt_touch(struct wacom_wac *wacom)
 {
 	struct input_dev *input = wacom->input;
@@ -1043,11 +1112,19 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
 	if (touch) {
 		int x = (data[2] << 4) | (data[4] >> 4);
 		int y = (data[3] << 4) | (data[4] & 0x0f);
-		int w = data[6];
+		int a = data[5];
+
+		// "a" is a scaled-down area which we assume is roughly
+		// circular and which can be described as: a=(pi*r^2)/C.
+		int x_res  = input_abs_get_res(input, ABS_X);
+		int y_res  = input_abs_get_res(input, ABS_Y);
+		int width  = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
+		int height = width * y_res / x_res;
 
 		input_report_abs(input, ABS_MT_POSITION_X, x);
 		input_report_abs(input, ABS_MT_POSITION_Y, y);
-		input_report_abs(input, ABS_MT_TOUCH_MAJOR, w);
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, width);
+		input_report_abs(input, ABS_MT_TOUCH_MINOR, height);
 	}
 }
 
@@ -1242,6 +1319,10 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
 		sync = wacom_intuos_irq(wacom_wac);
 		break;
 
+	case WACOM_24HDT:
+		sync = wacom_24hdt_irq(wacom_wac);
+		break;
+
 	case INTUOS5S:
 	case INTUOS5:
 	case INTUOS5L:
@@ -1327,7 +1408,8 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* these device have multiple inputs */
 	if (features->type >= WIRELESS ||
-	    (features->type >= INTUOS5S && features->type <= INTUOS5L))
+	    (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
+	    (features->oVid && features->oPid))
 		features->quirks |= WACOM_QUIRK_MULTI_INPUT;
 
 	/* quirk for bamboo touch with 2 low res touches */
@@ -1436,6 +1518,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
 		input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+
+		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
 		wacom_setup_cintiq(wacom_wac);
 		break;
 
@@ -1533,7 +1618,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 			input_mt_init_slots(input_dev, features->touch_max, 0);
 
 			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
-			                     0, 255, 0, 0);
+			                     0, features->x_max, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+			                     0, features->y_max, 0, 0);
 
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, features->x_max,
@@ -1560,6 +1647,15 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 		break;
 
+	case WACOM_24HDT:
+		if (features->device_type == BTN_TOOL_FINGER) {
+			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+		}
+		/* fall through */
+
 	case MTSCREEN:
 		if (features->device_type == BTN_TOOL_FINGER) {
 			wacom_wac->slots = kmalloc(features->touch_max *
@@ -1641,7 +1737,10 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
 
 				input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MAJOR,
-						     0, 255, 0, 0);
+						     0, features->x_max, 0, 0);
+				input_set_abs_params(input_dev,
+						     ABS_MT_TOUCH_MINOR,
+						     0, features->y_max, 0, 0);
 			}
 
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1851,8 +1950,11 @@ static const struct wacom_features wacom_features_0xF4 =
 	{ "Wacom Cintiq 24HD",       WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
 	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xF8 =
-	{ "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
-	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+	{ "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS,   104480, 65600, 2047, /* Pen */
+	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
+static const struct wacom_features wacom_features_0xF6 =
+	{ "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
+	  .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 };
 static const struct wacom_features wacom_features_0x3F =
 	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023,
 	  63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -2095,6 +2197,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_WACOM(0xF4) },
 	{ USB_DEVICE_WACOM(0xF8) },
+	{ USB_DEVICE_WACOM(0xF6) },
 	{ USB_DEVICE_WACOM(0xFA) },
 	{ USB_DEVICE_LENOVO(0x6004) },
 	{ }
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 96c185cc301e..345f1e76975e 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -29,6 +29,7 @@
 
 /* wacom data size per MT contact */
 #define WACOM_BYTES_PER_MT_PACKET	11
+#define WACOM_BYTES_PER_24HDT_PACKET	14
 
 /* device IDs */
 #define STYLUS_DEVICE_ID	0x02
@@ -49,6 +50,7 @@
 #define WACOM_REPORT_TPCHID		15
 #define WACOM_REPORT_TPCST		16
 #define WACOM_REPORT_TPC1FGE		18
+#define WACOM_REPORT_24HDT		1
 
 /* device quirks */
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
@@ -81,6 +83,7 @@ enum {
 	WACOM_MO,
 	WIRELESS,
 	BAMBOO_PT,
+	WACOM_24HDT,
 	TABLETPC,   /* add new TPC below */
 	TABLETPCE,
 	TABLETPC2FG,
@@ -109,6 +112,8 @@ struct wacom_features {
 	int distance_fuzz;
 	unsigned quirks;
 	unsigned touch_max;
+	int oVid;
+	int oPid;
 };
 
 struct wacom_shared {