diff options
Diffstat (limited to 'drivers/input/touchscreen/gunze.c')
| -rw-r--r-- | drivers/input/touchscreen/gunze.c | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c new file mode 100644 index 000000000000..c9d0a153671c --- /dev/null +++ b/drivers/input/touchscreen/gunze.c @@ -0,0 +1,205 @@ +/* + * $Id: gunze.c,v 1.12 2001/09/25 10:12:07 vojtech Exp $ + * + * Copyright (c) 2000-2001 Vojtech Pavlik + */ + +/* + * Gunze AHL-51S touchscreen driver for Linux + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Gunze AHL-51S touchscreen driver" + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define GUNZE_MAX_LENGTH 10 + +static char *gunze_name = "Gunze AHL-51S TouchScreen"; + +/* + * Per-touchscreen data. + */ + +struct gunze { + struct input_dev dev; + struct serio *serio; + int idx; + unsigned char data[GUNZE_MAX_LENGTH]; + char phys[32]; +}; + +static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs) +{ + struct input_dev *dev = &gunze->dev; + + if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || + (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { + gunze->data[10] = 0; + printk(KERN_WARNING "gunze.c: bad packet: >%s<\n", gunze->data); + return; + } + + input_regs(dev, regs); + input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10)); + input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10)); + input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T'); + input_sync(dev); +} + +static irqreturn_t gunze_interrupt(struct serio *serio, + unsigned char data, unsigned int flags, struct pt_regs *regs) +{ + struct gunze* gunze = serio_get_drvdata(serio); + + if (data == '\r') { + gunze_process_packet(gunze, regs); + gunze->idx = 0; + } else { + if (gunze->idx < GUNZE_MAX_LENGTH) + gunze->data[gunze->idx++] = data; + } + return IRQ_HANDLED; +} + +/* + * gunze_disconnect() is the opposite of gunze_connect() + */ + +static void gunze_disconnect(struct serio *serio) +{ + struct gunze* gunze = serio_get_drvdata(serio); + + input_unregister_device(&gunze->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + kfree(gunze); +} + +/* + * gunze_connect() is the routine that is called when someone adds a + * new serio device that supports Gunze protocol and registers it as + * an input device. + */ + +static int gunze_connect(struct serio *serio, struct serio_driver *drv) +{ + struct gunze *gunze; + int err; + + if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL))) + return -ENOMEM; + + memset(gunze, 0, sizeof(struct gunze)); + + init_input_dev(&gunze->dev); + gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(&gunze->dev, ABS_X, 24, 1000, 0, 0); + input_set_abs_params(&gunze->dev, ABS_Y, 24, 1000, 0, 0); + + gunze->serio = serio; + + sprintf(gunze->phys, "%s/input0", serio->phys); + + gunze->dev.private = gunze; + gunze->dev.name = gunze_name; + gunze->dev.phys = gunze->phys; + gunze->dev.id.bustype = BUS_RS232; + gunze->dev.id.vendor = SERIO_GUNZE; + gunze->dev.id.product = 0x0051; + gunze->dev.id.version = 0x0100; + + serio_set_drvdata(serio, gunze); + + err = serio_open(serio, drv); + if (err) { + serio_set_drvdata(serio, NULL); + kfree(gunze); + return err; + } + + input_register_device(&gunze->dev); + + printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys); + + return 0; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id gunze_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_GUNZE, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, gunze_serio_ids); + +static struct serio_driver gunze_drv = { + .driver = { + .name = "gunze", + }, + .description = DRIVER_DESC, + .id_table = gunze_serio_ids, + .interrupt = gunze_interrupt, + .connect = gunze_connect, + .disconnect = gunze_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init gunze_init(void) +{ + serio_register_driver(&gunze_drv); + return 0; +} + +static void __exit gunze_exit(void) +{ + serio_unregister_driver(&gunze_drv); +} + +module_init(gunze_init); +module_exit(gunze_exit); |