diff options
Diffstat (limited to 'drivers/input/touchscreen/tsc2007.c')
-rw-r--r-- | drivers/input/touchscreen/tsc2007.c | 496 |
1 files changed, 0 insertions, 496 deletions
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c deleted file mode 100644 index 5d0cd51c6f41..000000000000 --- a/drivers/input/touchscreen/tsc2007.c +++ /dev/null @@ -1,496 +0,0 @@ -/* - * drivers/input/touchscreen/tsc2007.c - * - * Copyright (c) 2008 MtekVision Co., Ltd. - * Kwangwoo Lee <kwlee@mtekvision.com> - * - * Using code from: - * - ads7846.c - * Copyright (c) 2005 David Brownell - * Copyright (c) 2006 Nokia Corporation - * - corgi_ts.c - * Copyright (C) 2004-2005 Richard Purdie - * - omap_ts.[hc], ads7846.h, ts_osk.c - * Copyright (C) 2002 MontaVista Software - * Copyright (C) 2004 Texas Instruments - * Copyright (C) 2005 Dirk Behme - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/of_device.h> -#include <linux/of.h> -#include <linux/of_gpio.h> - -#define TSC2007_MEASURE_TEMP0 (0x0 << 4) -#define TSC2007_MEASURE_AUX (0x2 << 4) -#define TSC2007_MEASURE_TEMP1 (0x4 << 4) -#define TSC2007_ACTIVATE_XN (0x8 << 4) -#define TSC2007_ACTIVATE_YN (0x9 << 4) -#define TSC2007_ACTIVATE_YP_XN (0xa << 4) -#define TSC2007_SETUP (0xb << 4) -#define TSC2007_MEASURE_X (0xc << 4) -#define TSC2007_MEASURE_Y (0xd << 4) -#define TSC2007_MEASURE_Z1 (0xe << 4) -#define TSC2007_MEASURE_Z2 (0xf << 4) - -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2) -#define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2) -#define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2) -#define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2) - -#define TSC2007_12BIT (0x0 << 1) -#define TSC2007_8BIT (0x1 << 1) - -#define MAX_12BIT ((1 << 12) - 1) - -#define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0) - -#define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y) -#define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1) -#define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2) -#define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X) -#define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN) - -struct ts_event { - u16 x; - u16 y; - u16 z1, z2; -}; - -struct tsc2007 { - struct input_dev *input; - char phys[32]; - - struct i2c_client *client; - - u16 model; - u16 x_plate_ohms; - u16 max_rt; - unsigned long poll_period; /* in jiffies */ - int fuzzx; - int fuzzy; - int fuzzz; - - unsigned gpio; - int irq; - - wait_queue_head_t wait; - bool stopped; - - int (*get_pendown_state)(struct device *); - void (*clear_penirq)(void); -}; - -static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd) -{ - s32 data; - u16 val; - - data = i2c_smbus_read_word_data(tsc->client, cmd); - if (data < 0) { - dev_err(&tsc->client->dev, "i2c io error: %d\n", data); - return data; - } - - /* The protocol and raw data format from i2c interface: - * S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P - * Where DataLow has [D11-D4], DataHigh has [D3-D0 << 4 | Dummy 4bit]. - */ - val = swab16(data) >> 4; - - dev_dbg(&tsc->client->dev, "data: 0x%x, val: 0x%x\n", data, val); - - return val; -} - -static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc) -{ - /* y- still on; turn on only y+ (and ADC) */ - tc->y = tsc2007_xfer(tsc, READ_Y); - - /* turn y- off, x+ on, then leave in lowpower */ - tc->x = tsc2007_xfer(tsc, READ_X); - - /* turn y+ off, x- on; we'll use formula #1 */ - tc->z1 = tsc2007_xfer(tsc, READ_Z1); - tc->z2 = tsc2007_xfer(tsc, READ_Z2); - - /* Prepare for next touch reading - power down ADC, enable PENIRQ */ - tsc2007_xfer(tsc, PWRDOWN); -} - -static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc) -{ - u32 rt = 0; - - /* range filtering */ - if (tc->x == MAX_12BIT) - tc->x = 0; - - if (likely(tc->x && tc->z1)) { - /* compute touch pressure resistance using equation #1 */ - rt = tc->z2 - tc->z1; - rt *= tc->x; - rt *= tsc->x_plate_ohms; - rt /= tc->z1; - rt = (rt + 2047) >> 12; - } - - return rt; -} - -static bool tsc2007_is_pen_down(struct tsc2007 *ts) -{ - /* - * NOTE: We can't rely on the pressure to determine the pen down - * state, even though this controller has a pressure sensor. - * The pressure value can fluctuate for quite a while after - * lifting the pen and in some cases may not even settle at the - * expected value. - * - * The only safe way to check for the pen up condition is in the - * work function by reading the pen signal state (it's a GPIO - * and IRQ). Unfortunately such callback is not always available, - * in that case we assume that the pen is down and expect caller - * to fall back on the pressure reading. - */ - - if (!ts->get_pendown_state) - return true; - - return ts->get_pendown_state(&ts->client->dev); -} - -static irqreturn_t tsc2007_soft_irq(int irq, void *handle) -{ - struct tsc2007 *ts = handle; - struct input_dev *input = ts->input; - struct ts_event tc; - u32 rt; - - while (!ts->stopped && tsc2007_is_pen_down(ts)) { - - /* pen is down, continue with the measurement */ - tsc2007_read_values(ts, &tc); - - rt = tsc2007_calculate_pressure(ts, &tc); - - if (!rt && !ts->get_pendown_state) { - /* - * If pressure reported is 0 and we don't have - * callback to check pendown state, we have to - * assume that pen was lifted up. - */ - break; - } - - if (rt <= ts->max_rt) { - dev_dbg(&ts->client->dev, - "DOWN point(%4d,%4d), pressure (%4u)\n", - tc.x, tc.y, rt); - - input_report_key(input, BTN_TOUCH, 1); - input_report_abs(input, ABS_X, tc.x); - input_report_abs(input, ABS_Y, tc.y); - input_report_abs(input, ABS_PRESSURE, rt); - - input_sync(input); - - } else { - /* - * Sample found inconsistent by debouncing or pressure is - * beyond the maximum. Don't report it to user space, - * repeat at least once more the measurement. - */ - dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); - } - - wait_event_timeout(ts->wait, ts->stopped, ts->poll_period); - } - - dev_dbg(&ts->client->dev, "UP\n"); - - input_report_key(input, BTN_TOUCH, 0); - input_report_abs(input, ABS_PRESSURE, 0); - input_sync(input); - - if (ts->clear_penirq) - ts->clear_penirq(); - - return IRQ_HANDLED; -} - -static irqreturn_t tsc2007_hard_irq(int irq, void *handle) -{ - struct tsc2007 *ts = handle; - - if (tsc2007_is_pen_down(ts)) - return IRQ_WAKE_THREAD; - - if (ts->clear_penirq) - ts->clear_penirq(); - - return IRQ_HANDLED; -} - -static void tsc2007_stop(struct tsc2007 *ts) -{ - ts->stopped = true; - mb(); - wake_up(&ts->wait); - - disable_irq(ts->irq); -} - -static int tsc2007_open(struct input_dev *input_dev) -{ - struct tsc2007 *ts = input_get_drvdata(input_dev); - int err; - - ts->stopped = false; - mb(); - - enable_irq(ts->irq); - - /* Prepare for touch readings - power down ADC and enable PENIRQ */ - err = tsc2007_xfer(ts, PWRDOWN); - if (err < 0) { - tsc2007_stop(ts); - return err; - } - - return 0; -} - -static void tsc2007_close(struct input_dev *input_dev) -{ - struct tsc2007 *ts = input_get_drvdata(input_dev); - - tsc2007_stop(ts); -} - -#ifdef CONFIG_OF -static int tsc2007_get_pendown_state_gpio(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct tsc2007 *ts = i2c_get_clientdata(client); - - return !gpio_get_value(ts->gpio); -} - -static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) -{ - struct device_node *np = client->dev.of_node; - u32 val32; - u64 val64; - - if (!np) { - dev_err(&client->dev, "missing device tree data\n"); - return -EINVAL; - } - - if (!of_property_read_u32(np, "ti,max-rt", &val32)) - ts->max_rt = val32; - else - ts->max_rt = MAX_12BIT; - - if (!of_property_read_u32(np, "ti,fuzzx", &val32)) - ts->fuzzx = val32; - - if (!of_property_read_u32(np, "ti,fuzzy", &val32)) - ts->fuzzy = val32; - - if (!of_property_read_u32(np, "ti,fuzzz", &val32)) - ts->fuzzz = val32; - - if (!of_property_read_u64(np, "ti,poll-period", &val64)) - ts->poll_period = msecs_to_jiffies(val64); - else - ts->poll_period = msecs_to_jiffies(1); - - if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) { - ts->x_plate_ohms = val32; - } else { - dev_err(&client->dev, "missing ti,x-plate-ohms devicetree property."); - return -EINVAL; - } - - ts->gpio = of_get_gpio(np, 0); - if (gpio_is_valid(ts->gpio)) - ts->get_pendown_state = tsc2007_get_pendown_state_gpio; - else - dev_warn(&client->dev, - "GPIO not specified in DT (of_get_gpio returned %d)\n", - ts->gpio); - - return 0; -} -#else -static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) -{ - dev_err(&client->dev, "platform data is required!\n"); - return -EINVAL; -} -#endif - -static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts, - const struct tsc2007_platform_data *pdata, - const struct i2c_device_id *id) -{ - ts->model = pdata->model; - ts->x_plate_ohms = pdata->x_plate_ohms; - ts->max_rt = pdata->max_rt ? : MAX_12BIT; - ts->poll_period = msecs_to_jiffies(pdata->poll_period ? : 1); - ts->get_pendown_state = pdata->get_pendown_state; - ts->clear_penirq = pdata->clear_penirq; - ts->fuzzx = pdata->fuzzx; - ts->fuzzy = pdata->fuzzy; - ts->fuzzz = pdata->fuzzz; - - if (pdata->x_plate_ohms == 0) { - dev_err(&client->dev, "x_plate_ohms is not set up in platform data"); - return -EINVAL; - } - - return 0; -} - -static void tsc2007_call_exit_platform_hw(void *data) -{ - struct device *dev = data; - const struct tsc2007_platform_data *pdata = dev_get_platdata(dev); - - pdata->exit_platform_hw(); -} - -static int tsc2007_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev); - struct tsc2007 *ts; - struct input_dev *input_dev; - int err; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_READ_WORD_DATA)) - return -EIO; - - ts = devm_kzalloc(&client->dev, sizeof(struct tsc2007), GFP_KERNEL); - if (!ts) - return -ENOMEM; - - if (pdata) - err = tsc2007_probe_pdev(client, ts, pdata, id); - else - err = tsc2007_probe_dt(client, ts); - if (err) - return err; - - input_dev = devm_input_allocate_device(&client->dev); - if (!input_dev) - return -ENOMEM; - - i2c_set_clientdata(client, ts); - - ts->client = client; - ts->irq = client->irq; - ts->input = input_dev; - init_waitqueue_head(&ts->wait); - - snprintf(ts->phys, sizeof(ts->phys), - "%s/input0", dev_name(&client->dev)); - - input_dev->name = "TSC2007 Touchscreen"; - input_dev->phys = ts->phys; - input_dev->id.bustype = BUS_I2C; - - input_dev->open = tsc2007_open; - input_dev->close = tsc2007_close; - - input_set_drvdata(input_dev, ts); - - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); - - input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0); - input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, - ts->fuzzz, 0); - - if (pdata) { - if (pdata->exit_platform_hw) { - err = devm_add_action(&client->dev, - tsc2007_call_exit_platform_hw, - &client->dev); - if (err) { - dev_err(&client->dev, - "Failed to register exit_platform_hw action, %d\n", - err); - return err; - } - } - - if (pdata->init_platform_hw) - pdata->init_platform_hw(); - } - - err = devm_request_threaded_irq(&client->dev, ts->irq, - tsc2007_hard_irq, tsc2007_soft_irq, - IRQF_ONESHOT, - client->dev.driver->name, ts); - if (err) { - dev_err(&client->dev, "Failed to request irq %d: %d\n", - ts->irq, err); - return err; - } - - tsc2007_stop(ts); - - err = input_register_device(input_dev); - if (err) { - dev_err(&client->dev, - "Failed to register input device: %d\n", err); - return err; - } - - return 0; -} - -static const struct i2c_device_id tsc2007_idtable[] = { - { "tsc2007", 0 }, - { } -}; - -MODULE_DEVICE_TABLE(i2c, tsc2007_idtable); - -#ifdef CONFIG_OF -static const struct of_device_id tsc2007_of_match[] = { - { .compatible = "ti,tsc2007" }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, tsc2007_of_match); -#endif - -static struct i2c_driver tsc2007_driver = { - .driver = { - .name = "tsc2007", - .of_match_table = of_match_ptr(tsc2007_of_match), - }, - .id_table = tsc2007_idtable, - .probe = tsc2007_probe, -}; - -module_i2c_driver(tsc2007_driver); - -MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>"); -MODULE_DESCRIPTION("TSC2007 TouchScreen Driver"); -MODULE_LICENSE("GPL"); |