diff options
Diffstat (limited to 'drivers/input/touchscreen')
29 files changed, 2123 insertions, 222 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 4af2a18eb3ba..2a2141915aa0 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -139,7 +139,6 @@ config TOUCHSCREEN_CY8CTMG110 tristate "cy8ctmg110 touchscreen" depends on I2C depends on GPIOLIB - help Say Y here if you have a cy8ctmg110 capacitive touchscreen on an AAVA device. @@ -149,6 +148,37 @@ config TOUCHSCREEN_CY8CTMG110 To compile this driver as a module, choose M here: the module will be called cy8ctmg110_ts. +config TOUCHSCREEN_CYTTSP_CORE + tristate "Cypress TTSP touchscreen" + help + Say Y here if you have a touchscreen using controller from + the Cypress TrueTouch(tm) Standard Product family connected + to your system. You will also need to select appropriate + bus connection below. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_core. + +config TOUCHSCREEN_CYTTSP_I2C + tristate "support I2C bus connection" + depends on TOUCHSCREEN_CYTTSP_CORE && I2C + help + Say Y here if the touchscreen is connected via I2C bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_i2c. + +config TOUCHSCREEN_CYTTSP_SPI + tristate "support SPI bus connection" + depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER + help + Say Y here if the touchscreen is connected via SPI bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_spi. + config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X @@ -213,9 +243,24 @@ config TOUCHSCREEN_FUJITSU To compile this driver as a module, choose M here: the module will be called fujitsu-ts. +config TOUCHSCREEN_ILI210X + tristate "Ilitek ILI210X based touchscreen" + depends on I2C + help + Say Y here if you have a ILI210X based touchscreen + controller. This driver supports models ILI2102, + ILI2102s, ILI2103, ILI2103s and ILI2105. + Such kind of chipsets can be found in Amazon Kindle Fire + touchscreens. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ili210x. + config TOUCHSCREEN_S3C2410 tristate "Samsung S3C2410/generic touchscreen input driver" - depends on ARCH_S3C2410 || SAMSUNG_DEV_TS + depends on ARCH_S3C24XX || SAMSUNG_DEV_TS select S3C_ADC help Say Y here if you have the s3c2410 touchscreen. @@ -430,6 +475,18 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. +config TOUCHSCREEN_TI_TSCADC + tristate "TI Touchscreen Interface" + depends on ARCH_OMAP2PLUS + help + Say Y here if you have 4/5/8 wire touchscreen controller + to be connected to the ADC controller on your TI AM335x SoC. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ti_tscadc. + config TOUCHSCREEN_ATMEL_TSADCC tristate "Atmel Touchscreen Interface" depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 @@ -577,6 +634,7 @@ config TOUCHSCREEN_USB_COMPOSITE - JASTEC USB Touch Controller/DigiTech DTR-02U - Zytronic controllers - Elo TouchSystems 2700 IntelliTouch + - EasyTouch USB Touch Controller from Data Modul Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -681,6 +739,14 @@ config TOUCHSCREEN_USB_NEXIO bool "NEXIO/iNexio device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_EASYTOUCH + default y + bool "EasyTouch USB Touch controller device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + help + Say Y here if you have a EasyTouch USB Touch controller device support. + If unsure, say N. + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 496091e88460..3d5cf8cbf89c 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -16,8 +16,11 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o +obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o @@ -26,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o +obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o @@ -45,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o +obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC) += ti_tscadc.o obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index 49a36df0b752..2c7692108e6c 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -860,17 +860,7 @@ static struct spi_driver ad7877_driver = { .remove = __devexit_p(ad7877_remove), }; -static int __init ad7877_init(void) -{ - return spi_register_driver(&ad7877_driver); -} -module_init(ad7877_init); - -static void __exit ad7877_exit(void) -{ - spi_unregister_driver(&ad7877_driver); -} -module_exit(ad7877_exit); +module_spi_driver(ad7877_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7877 touchscreen Driver"); diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c index 0dac6712f42b..3054354d0dd3 100644 --- a/drivers/input/touchscreen/ad7879-i2c.c +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -102,17 +102,7 @@ static struct i2c_driver ad7879_i2c_driver = { .id_table = ad7879_id, }; -static int __init ad7879_i2c_init(void) -{ - return i2c_add_driver(&ad7879_i2c_driver); -} -module_init(ad7879_i2c_init); - -static void __exit ad7879_i2c_exit(void) -{ - i2c_del_driver(&ad7879_i2c_driver); -} -module_exit(ad7879_i2c_exit); +module_i2c_driver(ad7879_i2c_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c index 9b2e1c2b1971..db49abf056ba 100644 --- a/drivers/input/touchscreen/ad7879-spi.c +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -157,17 +157,7 @@ static struct spi_driver ad7879_spi_driver = { .remove = __devexit_p(ad7879_spi_remove), }; -static int __init ad7879_spi_init(void) -{ - return spi_register_driver(&ad7879_spi_driver); -} -module_init(ad7879_spi_init); - -static void __exit ad7879_spi_exit(void) -{ - spi_unregister_driver(&ad7879_spi_driver); -} -module_exit(ad7879_spi_exit); +module_spi_driver(ad7879_spi_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver"); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 23fd90185659..f02028ec3db6 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1433,17 +1433,7 @@ static struct spi_driver ads7846_driver = { .remove = __devexit_p(ads7846_remove), }; -static int __init ads7846_init(void) -{ - return spi_register_driver(&ads7846_driver); -} -module_init(ads7846_init); - -static void __exit ads7846_exit(void) -{ - spi_unregister_driver(&ads7846_driver); -} -module_exit(ads7846_exit); +module_spi_driver(ads7846_driver); MODULE_DESCRIPTION("ADS7846 TouchScreen Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index 8034cbb20f74..c5c2dbb93869 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -392,9 +392,10 @@ static int __exit atmel_wm97xx_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int atmel_wm97xx_suspend(struct platform_device *pdev, pm_message_t msg) +#ifdef CONFIG_PM_SLEEP +static int atmel_wm97xx_suspend(struct *dev) { + struct platform_device *pdev = to_platform_device(dev); struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT); @@ -404,8 +405,9 @@ static int atmel_wm97xx_suspend(struct platform_device *pdev, pm_message_t msg) return 0; } -static int atmel_wm97xx_resume(struct platform_device *pdev) +static int atmel_wm97xx_resume(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); struct wm97xx *wm = atmel_wm97xx->wm; @@ -416,18 +418,18 @@ static int atmel_wm97xx_resume(struct platform_device *pdev) return 0; } -#else -#define atmel_wm97xx_suspend NULL -#define atmel_wm97xx_resume NULL #endif +static SIMPLE_DEV_PM_OPS(atmel_wm97xx_pm_ops, + atmel_wm97xx_suspend, atmel_wm97xx_resume); + static struct platform_driver atmel_wm97xx_driver = { .remove = __exit_p(atmel_wm97xx_remove), .driver = { - .name = "wm97xx-touch", + .name = "wm97xx-touch", + .owner = THIS_MODULE, + .pm = &atmel_wm97xx_pm_ops, }, - .suspend = atmel_wm97xx_suspend, - .resume = atmel_wm97xx_resume, }; static int __init atmel_wm97xx_init(void) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index a596c2775d1a..19d4ea65ea01 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -1267,18 +1267,7 @@ static struct i2c_driver mxt_driver = { .id_table = mxt_id, }; -static int __init mxt_init(void) -{ - return i2c_add_driver(&mxt_driver); -} - -static void __exit mxt_exit(void) -{ - i2c_del_driver(&mxt_driver); -} - -module_init(mxt_init); -module_exit(mxt_exit); +module_i2c_driver(mxt_driver); /* Module information */ MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c index 94fb9fbb08a9..c7047b6bb020 100644 --- a/drivers/input/touchscreen/auo-pixcir-ts.c +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -635,17 +635,7 @@ static struct i2c_driver auo_pixcir_driver = { .id_table = auo_pixcir_idtable, }; -static int __init auo_pixcir_init(void) -{ - return i2c_add_driver(&auo_pixcir_driver); -} -module_init(auo_pixcir_init); - -static void __exit auo_pixcir_exit(void) -{ - i2c_del_driver(&auo_pixcir_driver); -} -module_exit(auo_pixcir_exit); +module_i2c_driver(auo_pixcir_driver); MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index 902c7214e887..f2d03c06c2da 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -652,30 +652,7 @@ static struct i2c_driver bu21013_driver = { .id_table = bu21013_id, }; -/** - * bu21013_init() - initializes the bu21013 touchscreen driver - * - * This function used to initializes the bu21013 - * touchscreen driver and returns integer. - */ -static int __init bu21013_init(void) -{ - return i2c_add_driver(&bu21013_driver); -} - -/** - * bu21013_exit() - de-initializes the bu21013 touchscreen driver - * - * This function uses to de-initializes the bu21013 - * touchscreen driver and returns none. - */ -static void __exit bu21013_exit(void) -{ - i2c_del_driver(&bu21013_driver); -} - -module_init(bu21013_init); -module_exit(bu21013_exit); +module_i2c_driver(bu21013_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>"); diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c index d8815c5d54ad..237753ad1031 100644 --- a/drivers/input/touchscreen/cy8ctmg110_ts.c +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -350,18 +350,7 @@ static struct i2c_driver cy8ctmg110_driver = { .remove = __devexit_p(cy8ctmg110_remove), }; -static int __init cy8ctmg110_init(void) -{ - return i2c_add_driver(&cy8ctmg110_driver); -} - -static void __exit cy8ctmg110_exit(void) -{ - i2c_del_driver(&cy8ctmg110_driver); -} - -module_init(cy8ctmg110_init); -module_exit(cy8ctmg110_exit); +module_i2c_driver(cy8ctmg110_driver); MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>"); MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver"); diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c new file mode 100644 index 000000000000..f030d9ec795d --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -0,0 +1,625 @@ +/* + * Core Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +#include "cyttsp_core.h" + +/* Bootloader number of command keys */ +#define CY_NUM_BL_KEYS 8 + +/* helpers */ +#define GET_NUM_TOUCHES(x) ((x) & 0x0F) +#define IS_LARGE_AREA(x) (((x) & 0x10) >> 4) +#define IS_BAD_PKT(x) ((x) & 0x20) +#define IS_VALID_APP(x) ((x) & 0x01) +#define IS_OPERATIONAL_ERR(x) ((x) & 0x3F) +#define GET_HSTMODE(reg) (((reg) & 0x70) >> 4) +#define GET_BOOTLOADERMODE(reg) (((reg) & 0x10) >> 4) + +#define CY_REG_BASE 0x00 +#define CY_REG_ACT_DIST 0x1E +#define CY_REG_ACT_INTRVL 0x1D +#define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL + 1) +#define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT + 1) +#define CY_MAXZ 255 +#define CY_DELAY_DFLT 20 /* ms */ +#define CY_DELAY_MAX 500 +#define CY_ACT_DIST_DFLT 0xF8 +#define CY_HNDSHK_BIT 0x80 +/* device mode bits */ +#define CY_OPERATE_MODE 0x00 +#define CY_SYSINFO_MODE 0x10 +/* power mode select bits */ +#define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */ +#define CY_DEEP_SLEEP_MODE 0x02 +#define CY_LOW_POWER_MODE 0x04 + +/* Slots management */ +#define CY_MAX_FINGER 4 +#define CY_MAX_ID 16 + +static const u8 bl_command[] = { + 0x00, /* file offset */ + 0xFF, /* command */ + 0xA5, /* exit bootloader command */ + 0, 1, 2, 3, 4, 5, 6, 7 /* default keys */ +}; + +static int ttsp_read_block_data(struct cyttsp *ts, u8 command, + u8 length, void *buf) +{ + int error; + int tries; + + for (tries = 0; tries < CY_NUM_RETRY; tries++) { + error = ts->bus_ops->read(ts, command, length, buf); + if (!error) + return 0; + + msleep(CY_DELAY_DFLT); + } + + return -EIO; +} + +static int ttsp_write_block_data(struct cyttsp *ts, u8 command, + u8 length, void *buf) +{ + int error; + int tries; + + for (tries = 0; tries < CY_NUM_RETRY; tries++) { + error = ts->bus_ops->write(ts, command, length, buf); + if (!error) + return 0; + + msleep(CY_DELAY_DFLT); + } + + return -EIO; +} + +static int ttsp_send_command(struct cyttsp *ts, u8 cmd) +{ + return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd); +} + +static int cyttsp_load_bl_regs(struct cyttsp *ts) +{ + memset(&ts->bl_data, 0, sizeof(ts->bl_data)); + ts->bl_data.bl_status = 0x10; + + return ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->bl_data), &ts->bl_data); +} + +static int cyttsp_exit_bl_mode(struct cyttsp *ts) +{ + int error; + u8 bl_cmd[sizeof(bl_command)]; + + memcpy(bl_cmd, bl_command, sizeof(bl_command)); + if (ts->pdata->bl_keys) + memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS], + ts->pdata->bl_keys, sizeof(bl_command)); + + error = ttsp_write_block_data(ts, CY_REG_BASE, + sizeof(bl_cmd), bl_cmd); + if (error) + return error; + + /* wait for TTSP Device to complete the operation */ + msleep(CY_DELAY_DFLT); + + error = cyttsp_load_bl_regs(ts); + if (error) + return error; + + if (GET_BOOTLOADERMODE(ts->bl_data.bl_status)) + return -EIO; + + return 0; +} + +static int cyttsp_set_operational_mode(struct cyttsp *ts) +{ + int error; + + error = ttsp_send_command(ts, CY_OPERATE_MODE); + if (error) + return error; + + /* wait for TTSP Device to complete switch to Operational mode */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->xy_data), &ts->xy_data); + if (error) + return error; + + return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0; +} + +static int cyttsp_set_sysinfo_mode(struct cyttsp *ts) +{ + int error; + + memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data)); + + /* switch to sysinfo mode */ + error = ttsp_send_command(ts, CY_SYSINFO_MODE); + if (error) + return error; + + /* read sysinfo registers */ + msleep(CY_DELAY_DFLT); + error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data), + &ts->sysinfo_data); + if (error) + return error; + + if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl) + return -EIO; + + return 0; +} + +static int cyttsp_set_sysinfo_regs(struct cyttsp *ts) +{ + int retval = 0; + + if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT || + ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT || + ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) { + + u8 intrvl_ray[] = { + ts->pdata->act_intrvl, + ts->pdata->tch_tmout, + ts->pdata->lp_intrvl + }; + + /* set intrvl registers */ + retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL, + sizeof(intrvl_ray), intrvl_ray); + msleep(CY_DELAY_DFLT); + } + + return retval; +} + +static int cyttsp_soft_reset(struct cyttsp *ts) +{ + unsigned long timeout; + int retval; + + /* wait for interrupt to set ready completion */ + INIT_COMPLETION(ts->bl_ready); + ts->state = CY_BL_STATE; + + enable_irq(ts->irq); + + retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE); + if (retval) + goto out; + + timeout = wait_for_completion_timeout(&ts->bl_ready, + msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX)); + retval = timeout ? 0 : -EIO; + +out: + ts->state = CY_IDLE_STATE; + disable_irq(ts->irq); + return retval; +} + +static int cyttsp_act_dist_setup(struct cyttsp *ts) +{ + u8 act_dist_setup = ts->pdata->act_dist; + + /* Init gesture; active distance setup */ + return ttsp_write_block_data(ts, CY_REG_ACT_DIST, + sizeof(act_dist_setup), &act_dist_setup); +} + +static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids) +{ + ids[0] = xy_data->touch12_id >> 4; + ids[1] = xy_data->touch12_id & 0xF; + ids[2] = xy_data->touch34_id >> 4; + ids[3] = xy_data->touch34_id & 0xF; +} + +static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data, + int idx) +{ + switch (idx) { + case 0: + return &xy_data->tch1; + case 1: + return &xy_data->tch2; + case 2: + return &xy_data->tch3; + case 3: + return &xy_data->tch4; + default: + return NULL; + } +} + +static void cyttsp_report_tchdata(struct cyttsp *ts) +{ + struct cyttsp_xydata *xy_data = &ts->xy_data; + struct input_dev *input = ts->input; + int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat); + const struct cyttsp_tch *tch; + int ids[CY_MAX_ID]; + int i; + DECLARE_BITMAP(used, CY_MAX_ID); + + if (IS_LARGE_AREA(xy_data->tt_stat) == 1) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Large area detected\n", __func__); + } else if (num_tch > CY_MAX_FINGER) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__); + } else if (IS_BAD_PKT(xy_data->tt_mode)) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__); + } + + cyttsp_extract_track_ids(xy_data, ids); + + bitmap_zero(used, CY_MAX_ID); + + for (i = 0; i < num_tch; i++) { + tch = cyttsp_get_tch(xy_data, i); + + input_mt_slot(input, ids[i]); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x)); + input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y)); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z); + + __set_bit(ids[i], used); + } + + for (i = 0; i < CY_MAX_ID; i++) { + if (test_bit(i, used)) + continue; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, false); + } + + input_sync(input); +} + +static irqreturn_t cyttsp_irq(int irq, void *handle) +{ + struct cyttsp *ts = handle; + int error; + + if (unlikely(ts->state == CY_BL_STATE)) { + complete(&ts->bl_ready); + goto out; + } + + /* Get touch data from CYTTSP device */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(struct cyttsp_xydata), &ts->xy_data); + if (error) + goto out; + + /* provide flow control handshake */ + if (ts->pdata->use_hndshk) { + error = ttsp_send_command(ts, + ts->xy_data.hst_mode ^ CY_HNDSHK_BIT); + if (error) + goto out; + } + + if (unlikely(ts->state == CY_IDLE_STATE)) + goto out; + + if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) { + /* + * TTSP device has reset back to bootloader mode. + * Restore to operational mode. + */ + error = cyttsp_exit_bl_mode(ts); + if (error) { + dev_err(ts->dev, + "Could not return to operational mode, err: %d\n", + error); + ts->state = CY_IDLE_STATE; + } + } else { + cyttsp_report_tchdata(ts); + } + +out: + return IRQ_HANDLED; +} + +static int cyttsp_power_on(struct cyttsp *ts) +{ + int error; + + error = cyttsp_soft_reset(ts); + if (error) + return error; + + error = cyttsp_load_bl_regs(ts); + if (error) + return error; + + if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) && + IS_VALID_APP(ts->bl_data.bl_status)) { + error = cyttsp_exit_bl_mode(ts); + if (error) + return error; + } + + if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE || + IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) { + return -ENODEV; + } + + error = cyttsp_set_sysinfo_mode(ts); + if (error) + return error; + + error = cyttsp_set_sysinfo_regs(ts); + if (error) + return error; + + error = cyttsp_set_operational_mode(ts); + if (error) + return error; + + /* init active distance */ + error = cyttsp_act_dist_setup(ts); + if (error) + return error; + + ts->state = CY_ACTIVE_STATE; + + return 0; +} + +static int cyttsp_enable(struct cyttsp *ts) +{ + int error; + + /* + * The device firmware can wake on an I2C or SPI memory slave + * address match. So just reading a register is sufficient to + * wake up the device. The first read attempt will fail but it + * will wake it up making the second read attempt successful. + */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->xy_data), &ts->xy_data); + if (error) + return error; + + if (GET_HSTMODE(ts->xy_data.hst_mode)) + return -EIO; + + enable_irq(ts->irq); + + return 0; +} + +static int cyttsp_disable(struct cyttsp *ts) +{ + int error; + + error = ttsp_send_command(ts, CY_LOW_POWER_MODE); + if (error) + return error; + + disable_irq(ts->irq); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cyttsp_suspend(struct device *dev) +{ + struct cyttsp *ts = dev_get_drvdata(dev); + int retval = 0; + + mutex_lock(&ts->input->mutex); + + if (ts->input->users) { + retval = cyttsp_disable(ts); + if (retval == 0) + ts->suspended = true; + } + + mutex_unlock(&ts->input->mutex); + + return retval; +} + +static int cyttsp_resume(struct device *dev) +{ + struct cyttsp *ts = dev_get_drvdata(dev); + + mutex_lock(&ts->input->mutex); + + if (ts->input->users) + cyttsp_enable(ts); + + ts->suspended = false; + + mutex_unlock(&ts->input->mutex); + + return 0; +} + +#endif + +SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume); +EXPORT_SYMBOL_GPL(cyttsp_pm_ops); + +static int cyttsp_open(struct input_dev *dev) +{ + struct cyttsp *ts = input_get_drvdata(dev); + int retval = 0; + + if (!ts->suspended) + retval = cyttsp_enable(ts); + + return retval; +} + +static void cyttsp_close(struct input_dev *dev) +{ + struct cyttsp *ts = input_get_drvdata(dev); + + if (!ts->suspended) + cyttsp_disable(ts); +} + +struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, + struct device *dev, int irq, size_t xfer_buf_size) +{ + const struct cyttsp_platform_data *pdata = dev->platform_data; + struct cyttsp *ts; + struct input_dev *input_dev; + int error; + + if (!pdata || !pdata->name || irq <= 0) { + error = -EINVAL; + goto err_out; + } + + ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + ts->dev = dev; + ts->input = input_dev; + ts->pdata = dev->platform_data; + ts->bus_ops = bus_ops; + ts->irq = irq; + + init_completion(&ts->bl_ready); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); + + if (pdata->init) { + error = pdata->init(); + if (error) { + dev_err(ts->dev, "platform init failed, err: %d\n", + error); + goto err_free_mem; + } + } + + input_dev->name = pdata->name; + input_dev->phys = ts->phys; + input_dev->id.bustype = bus_ops->bustype; + input_dev->dev.parent = ts->dev; + + input_dev->open = cyttsp_open; + input_dev->close = cyttsp_close; + + input_set_drvdata(input_dev, ts); + + __set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, pdata->maxx, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, pdata->maxy, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, CY_MAXZ, 0, 0); + + input_mt_init_slots(input_dev, CY_MAX_ID); + + error = request_threaded_irq(ts->irq, NULL, cyttsp_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + pdata->name, ts); + if (error) { + dev_err(ts->dev, "failed to request IRQ %d, err: %d\n", + ts->irq, error); + goto err_platform_exit; + } + + disable_irq(ts->irq); + + error = cyttsp_power_on(ts); + if (error) + goto err_free_irq; + + error = input_register_device(input_dev); + if (error) { + dev_err(ts->dev, "failed to register input device: %d\n", + error); + goto err_free_irq; + } + + return ts; + +err_free_irq: + free_irq(ts->irq, ts); +err_platform_exit: + if (pdata->exit) + pdata->exit(); +err_free_mem: + input_free_device(input_dev); + kfree(ts); +err_out: + return ERR_PTR(error); +} +EXPORT_SYMBOL_GPL(cyttsp_probe); + +void cyttsp_remove(struct cyttsp *ts) +{ + free_irq(ts->irq, ts); + input_unregister_device(ts->input); + if (ts->pdata->exit) + ts->pdata->exit(); + kfree(ts); +} +EXPORT_SYMBOL_GPL(cyttsp_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core"); +MODULE_AUTHOR("Cypress"); diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h new file mode 100644 index 000000000000..1aa3c6967e70 --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_core.h @@ -0,0 +1,149 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + + +#ifndef __CYTTSP_CORE_H__ +#define __CYTTSP_CORE_H__ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/device.h> +#include <linux/input/cyttsp.h> + +#define CY_NUM_RETRY 16 /* max number of retries for read ops */ + +struct cyttsp_tch { + __be16 x, y; + u8 z; +} __packed; + +/* TrueTouch Standard Product Gen3 interface definition */ +struct cyttsp_xydata { + u8 hst_mode; + u8 tt_mode; + u8 tt_stat; + struct cyttsp_tch tch1; + u8 touch12_id; + struct cyttsp_tch tch2; + u8 gest_cnt; + u8 gest_id; + struct cyttsp_tch tch3; + u8 touch34_id; + struct cyttsp_tch tch4; + u8 tt_undef[3]; + u8 act_dist; + u8 tt_reserved; +} __packed; + + +/* TTSP System Information interface definition */ +struct cyttsp_sysinfo_data { + u8 hst_mode; + u8 mfg_cmd; + u8 mfg_stat; + u8 cid[3]; + u8 tt_undef1; + u8 uid[8]; + u8 bl_verh; + u8 bl_verl; + u8 tts_verh; + u8 tts_verl; + u8 app_idh; + u8 app_idl; + u8 app_verh; + u8 app_verl; + u8 tt_undef[5]; + u8 scn_typ; + u8 act_intrvl; + u8 tch_tmout; + u8 lp_intrvl; +}; + +/* TTSP Bootloader Register Map interface definition */ +#define CY_BL_CHKSUM_OK 0x01 +struct cyttsp_bootloader_data { + u8 bl_file; + u8 bl_status; + u8 bl_error; + u8 blver_hi; + u8 blver_lo; + u8 bld_blver_hi; + u8 bld_blver_lo; + u8 ttspver_hi; + u8 ttspver_lo; + u8 appid_hi; + u8 appid_lo; + u8 appver_hi; + u8 appver_lo; + u8 cid_0; + u8 cid_1; + u8 cid_2; +}; + +struct cyttsp; + +struct cyttsp_bus_ops { + u16 bustype; + int (*write)(struct cyttsp *ts, + u8 addr, u8 length, const void *values); + int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values); +}; + +enum cyttsp_state { + CY_IDLE_STATE, + CY_ACTIVE_STATE, + CY_BL_STATE, +}; + +struct cyttsp { + struct device *dev; + int irq; + struct input_dev *input; + char phys[32]; + const struct cyttsp_platform_data *pdata; + const struct cyttsp_bus_ops *bus_ops; + struct cyttsp_bootloader_data bl_data; + struct cyttsp_sysinfo_data sysinfo_data; + struct cyttsp_xydata xy_data; + struct completion bl_ready; + enum cyttsp_state state; + bool suspended; + + u8 xfer_buf[] ____cacheline_aligned; +}; + +struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, + struct device *dev, int irq, size_t xfer_buf_size); +void cyttsp_remove(struct cyttsp *ts); + +extern const struct dev_pm_ops cyttsp_pm_ops; + +#endif /* __CYTTSP_CORE_H__ */ diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c new file mode 100644 index 000000000000..2af1d0c52bcd --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_i2c.c @@ -0,0 +1,136 @@ +/* + * Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include "cyttsp_core.h" + +#include <linux/i2c.h> +#include <linux/input.h> + +#define CY_I2C_DATA_SIZE 128 + +static int cyttsp_i2c_read_block_data(struct cyttsp *ts, + u8 addr, u8 length, void *values) +{ + struct i2c_client *client = to_i2c_client(ts->dev); + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &addr, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = values, + }, + }; + int retval; + + retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (retval < 0) + return retval; + + return retval != ARRAY_SIZE(msgs) ? -EIO : 0; +} + +static int cyttsp_i2c_write_block_data(struct cyttsp *ts, + u8 addr, u8 length, const void *values) +{ + struct i2c_client *client = to_i2c_client(ts->dev); + int retval; + + ts->xfer_buf[0] = addr; + memcpy(&ts->xfer_buf[1], values, length); + + retval = i2c_master_send(client, ts->xfer_buf, length + 1); + + return retval < 0 ? retval : 0; +} + +static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = { + .bustype = BUS_I2C, + .write = cyttsp_i2c_write_block_data, + .read = cyttsp_i2c_read_block_data, +}; + +static int __devinit cyttsp_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cyttsp *ts; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C functionality not Supported\n"); + return -EIO; + } + + ts = cyttsp_probe(&cyttsp_i2c_bus_ops, &client->dev, client->irq, + CY_I2C_DATA_SIZE); + + if (IS_ERR(ts)) + return PTR_ERR(ts); + + i2c_set_clientdata(client, ts); + + return 0; +} + +static int __devexit cyttsp_i2c_remove(struct i2c_client *client) +{ + struct cyttsp *ts = i2c_get_clientdata(client); + + cyttsp_remove(ts); + + return 0; +} + +static const struct i2c_device_id cyttsp_i2c_id[] = { + { CY_I2C_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id); + +static struct i2c_driver cyttsp_i2c_driver = { + .driver = { + .name = CY_I2C_NAME, + .owner = THIS_MODULE, + .pm = &cyttsp_pm_ops, + }, + .probe = cyttsp_i2c_probe, + .remove = __devexit_p(cyttsp_i2c_remove), + .id_table = cyttsp_i2c_id, +}; + +module_i2c_driver(cyttsp_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver"); +MODULE_AUTHOR("Cypress"); +MODULE_ALIAS("i2c:cyttsp"); diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c new file mode 100644 index 000000000000..9f263410407b --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_spi.c @@ -0,0 +1,200 @@ +/* + * Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include "cyttsp_core.h" + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/spi/spi.h> + +#define CY_SPI_WR_OP 0x00 /* r/~w */ +#define CY_SPI_RD_OP 0x01 +#define CY_SPI_CMD_BYTES 4 +#define CY_SPI_SYNC_BYTE 2 +#define CY_SPI_SYNC_ACK1 0x62 /* from protocol v.2 */ +#define CY_SPI_SYNC_ACK2 0x9D /* from protocol v.2 */ +#define CY_SPI_DATA_SIZE 128 +#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE) +#define CY_SPI_BITS_PER_WORD 8 + +static int cyttsp_spi_xfer(struct cyttsp *ts, + u8 op, u8 reg, u8 *buf, int length) +{ + struct spi_device *spi = to_spi_device(ts->dev); + struct spi_message msg; + struct spi_transfer xfer[2]; + u8 *wr_buf = &ts->xfer_buf[0]; + u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE]; + int retval; + int i; + + if (length > CY_SPI_DATA_SIZE) { + dev_err(ts->dev, "%s: length %d is too big.\n", + __func__, length); + return -EINVAL; + } + + memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); + memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE); + + wr_buf[0] = 0x00; /* header byte 0 */ + wr_buf[1] = 0xFF; /* header byte 1 */ + wr_buf[2] = reg; /* reg index */ + wr_buf[3] = op; /* r/~w */ + if (op == CY_SPI_WR_OP) + memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); + + memset(xfer, 0, sizeof(xfer)); + spi_message_init(&msg); + + /* + We set both TX and RX buffers because Cypress TTSP + requires full duplex operation. + */ + xfer[0].tx_buf = wr_buf; + xfer[0].rx_buf = rd_buf; + switch (op) { + case CY_SPI_WR_OP: + xfer[0].len = length + CY_SPI_CMD_BYTES; + spi_message_add_tail(&xfer[0], &msg); + break; + + case CY_SPI_RD_OP: + xfer[0].len = CY_SPI_CMD_BYTES; + spi_message_add_tail(&xfer[0], &msg); + + xfer[1].rx_buf = buf; + xfer[1].len = length; + spi_message_add_tail(&xfer[1], &msg); + break; + + default: + dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op); + return -EINVAL; + } + + retval = spi_sync(spi, &msg); + if (retval < 0) { + dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n", + __func__, retval, xfer[1].len, op); + + /* + * do not return here since was a bad ACK sequence + * let the following ACK check handle any errors and + * allow silent retries + */ + } + + if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 || + rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) { + + dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op); + + for (i = 0; i < CY_SPI_CMD_BYTES; i++) + dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n", + __func__, i, rd_buf[i]); + for (i = 0; i < length; i++) + dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n", + __func__, i, buf[i]); + + return -EIO; + } + + return 0; +} + +static int cyttsp_spi_read_block_data(struct cyttsp *ts, + u8 addr, u8 length, void *data) +{ + return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length); +} + +static int cyttsp_spi_write_block_data(struct cyttsp *ts, + u8 addr, u8 length, const void *data) +{ + return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length); +} + +static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = { + .bustype = BUS_SPI, + .write = cyttsp_spi_write_block_data, + .read = cyttsp_spi_read_block_data, +}; + +static int __devinit cyttsp_spi_probe(struct spi_device *spi) +{ + struct cyttsp *ts; + int error; + + /* Set up SPI*/ + spi->bits_per_word = CY_SPI_BITS_PER_WORD; + spi->mode = SPI_MODE_0; + error = spi_setup(spi); + if (error < 0) { + dev_err(&spi->dev, "%s: SPI setup error %d\n", + __func__, error); + return error; + } + + ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, + CY_SPI_DATA_BUF_SIZE * 2); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + spi_set_drvdata(spi, ts); + + return 0; +} + +static int __devexit cyttsp_spi_remove(struct spi_device *spi) +{ + struct cyttsp *ts = spi_get_drvdata(spi); + + cyttsp_remove(ts); + + return 0; +} + +static struct spi_driver cyttsp_spi_driver = { + .driver = { + .name = CY_SPI_NAME, + .owner = THIS_MODULE, + .pm = &cyttsp_pm_ops, + }, + .probe = cyttsp_spi_probe, + .remove = __devexit_p(cyttsp_spi_remove), +}; + +module_spi_driver(cyttsp_spi_driver); + +MODULE_ALIAS("spi:cyttsp"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); +MODULE_AUTHOR("Cypress"); +MODULE_ALIAS("spi:cyttsp"); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 1df19bb8534a..503c7096ed36 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -320,20 +320,8 @@ static struct i2c_driver eeti_ts_driver = { .id_table = eeti_ts_id, }; -static int __init eeti_ts_init(void) -{ - return i2c_add_driver(&eeti_ts_driver); -} - -static void __exit eeti_ts_exit(void) -{ - i2c_del_driver(&eeti_ts_driver); -} +module_i2c_driver(eeti_ts_driver); MODULE_DESCRIPTION("EETI Touchscreen driver"); MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); MODULE_LICENSE("GPL"); - -module_init(eeti_ts_init); -module_exit(eeti_ts_exit); - diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index eadcc2e83c77..70524dd34f42 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -285,18 +285,7 @@ static struct i2c_driver egalax_ts_driver = { .remove = __devexit_p(egalax_ts_remove), }; -static int __init egalax_ts_init(void) -{ - return i2c_add_driver(&egalax_ts_driver); -} - -static void __exit egalax_ts_exit(void) -{ - i2c_del_driver(&egalax_ts_driver); -} - -module_init(egalax_ts_init); -module_exit(egalax_ts_exit); +module_i2c_driver(egalax_ts_driver); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller"); diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index 639a6044183d..85cf9bee8018 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -93,7 +93,7 @@ static int __init hp680_ts_init(void) hp680_ts_dev->phys = "hp680_ts/input0"; if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, - 0, MODNAME, 0) < 0) { + 0, MODNAME, NULL) < 0) { printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", HP680_TS_IRQ); err = -EBUSY; diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c new file mode 100644 index 000000000000..c0044175a921 --- /dev/null +++ b/drivers/input/touchscreen/ili210x.c @@ -0,0 +1,360 @@ +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/input/ili210x.h> + +#define MAX_TOUCHES 2 +#define DEFAULT_POLL_PERIOD 20 + +/* Touchscreen commands */ +#define REG_TOUCHDATA 0x10 +#define REG_PANEL_INFO 0x20 +#define REG_FIRMWARE_VERSION 0x40 +#define REG_CALIBRATE 0xcc + +struct finger { + u8 x_low; + u8 x_high; + u8 y_low; + u8 y_high; +} __packed; + +struct touchdata { + u8 status; + struct finger finger[MAX_TOUCHES]; +} __packed; + +struct panel_info { + struct finger finger_max; + u8 xchannel_num; + u8 ychannel_num; +} __packed; + +struct firmware_version { + u8 id; + u8 major; + u8 minor; +} __packed; + +struct ili210x { + struct i2c_client *client; + struct input_dev *input; + bool (*get_pendown_state)(void); + unsigned int poll_period; + struct delayed_work dwork; +}; + +static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, + size_t len) +{ + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + } + }; + + if (i2c_transfer(client->adapter, msg, 2) != 2) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } + + return 0; +} + +static void ili210x_report_events(struct input_dev *input, + const struct touchdata *touchdata) +{ + int i; + bool touch; + unsigned int x, y; + const struct finger *finger; + + for (i = 0; i < MAX_TOUCHES; i++) { + input_mt_slot(input, i); + + finger = &touchdata->finger[i]; + + touch = touchdata->status & (1 << i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + x = finger->x_low | (finger->x_high << 8); + y = finger->y_low | (finger->y_high << 8); + + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + } + } + + input_mt_report_pointer_emulation(input, false); + input_sync(input); +} + +static bool get_pendown_state(const struct ili210x *priv) +{ + bool state = false; + + if (priv->get_pendown_state) + state = priv->get_pendown_state(); + + return state; +} + +static void ili210x_work(struct work_struct *work) +{ + struct ili210x *priv = container_of(work, struct ili210x, + dwork.work); + struct i2c_client *client = priv->client; + struct touchdata touchdata; + int error; + + error = ili210x_read_reg(client, REG_TOUCHDATA, + &touchdata, sizeof(touchdata)); + if (error) { + dev_err(&client->dev, + "Unable to get touchdata, err = %d\n", error); + return; + } + + ili210x_report_events(priv->input, &touchdata); + + if ((touchdata.status & 0xf3) || get_pendown_state(priv)) + schedule_delayed_work(&priv->dwork, + msecs_to_jiffies(priv->poll_period)); +} + +static irqreturn_t ili210x_irq(int irq, void *irq_data) +{ + struct ili210x *priv = irq_data; + + schedule_delayed_work(&priv->dwork, 0); + + return IRQ_HANDLED; +} + +static ssize_t ili210x_calibrate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + unsigned long calibrate; + int rc; + u8 cmd = REG_CALIBRATE; + + if (kstrtoul(buf, 10, &calibrate)) + return -EINVAL; + + if (calibrate > 1) + return -EINVAL; + + if (calibrate) { + rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); + if (rc != sizeof(cmd)) + return -EIO; + } + + return count; +} +static DEVICE_ATTR(calibrate, 0644, NULL, ili210x_calibrate); + +static struct attribute *ili210x_attributes[] = { + &dev_attr_calibrate.attr, + NULL, +}; + +static const struct attribute_group ili210x_attr_group = { + .attrs = ili210x_attributes, +}; + +static int __devinit ili210x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + const struct ili210x_platform_data *pdata = dev->platform_data; + struct ili210x *priv; + struct input_dev *input; + struct panel_info panel; + struct firmware_version firmware; + int xmax, ymax; + int error; + + dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + + if (!pdata) { + dev_err(dev, "No platform data!\n"); + return -EINVAL; + } + + if (client->irq <= 0) { + dev_err(dev, "No IRQ!\n"); + return -EINVAL; + } + + /* Get firmware version */ + error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, + &firmware, sizeof(firmware)); + if (error) { + dev_err(dev, "Failed to get firmware version, err: %d\n", + error); + return error; + } + + /* get panel info */ + error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel)); + if (error) { + dev_err(dev, "Failed to get panel informations, err: %d\n", + error); + return error; + } + + xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8); + ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + input = input_allocate_device(); + if (!priv || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + priv->client = client; + priv->input = input; + priv->get_pendown_state = pdata->get_pendown_state; + priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD; + INIT_DELAYED_WORK(&priv->dwork, ili210x_work); + + /* Setup input device */ + input->name = "ILI210x Touchscreen"; + input->id.bustype = BUS_I2C; + input->dev.parent = dev; + + __set_bit(EV_SYN, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + + /* Single touch */ + input_set_abs_params(input, ABS_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); + + /* Multi touch */ + input_mt_init_slots(input, MAX_TOUCHES); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); + + input_set_drvdata(input, priv); + i2c_set_clientdata(client, priv); + + error = request_irq(client->irq, ili210x_irq, pdata->irq_flags, + client->name, priv); + if (error) { + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", + error); + goto err_free_mem; + } + + error = sysfs_create_group(&dev->kobj, &ili210x_attr_group); + if (error) { + dev_err(dev, "Unable to create sysfs attributes, err: %d\n", + error); + goto err_free_irq; + } + + error = input_register_device(priv->input); + if (error) { + dev_err(dev, "Cannot regiser input device, err: %d\n", error); + goto err_remove_sysfs; + } + + device_init_wakeup(&client->dev, 1); + + dev_dbg(dev, + "ILI210x initialized (IRQ: %d), firmware version %d.%d.%d", + client->irq, firmware.id, firmware.major, firmware.minor); + + return 0; + +err_remove_sysfs: + sysfs_remove_group(&dev->kobj, &ili210x_attr_group); +err_free_irq: + free_irq(client->irq, priv); +err_free_mem: + input_free_device(input); + kfree(priv); + return error; +} + +static int __devexit ili210x_i2c_remove(struct i2c_client *client) +{ + struct ili210x *priv = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group); + free_irq(priv->client->irq, priv); + cancel_delayed_work_sync(&priv->dwork); + input_unregister_device(priv->input); + kfree(priv); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ili210x_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int ili210x_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, + ili210x_i2c_suspend, ili210x_i2c_resume); + +static const struct i2c_device_id ili210x_i2c_id[] = { + { "ili210x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); + +static struct i2c_driver ili210x_ts_driver = { + .driver = { + .name = "ili210x_i2c", + .owner = THIS_MODULE, + .pm = &ili210x_i2c_pm, + }, + .id_table = ili210x_i2c_id, + .probe = ili210x_i2c_probe, + .remove = __devexit_p(ili210x_i2c_remove), +}; + +module_i2c_driver(ili210x_ts_driver); + +MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); +MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index c3848ad2325b..d9be6eac99b1 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -22,6 +22,7 @@ #include <mach/hardware.h> #include <mach/jornada720.h> +#include <mach/irqs.h> MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>"); MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver"); diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c index 4627fe55b401..4eab50b856d7 100644 --- a/drivers/input/touchscreen/max11801_ts.c +++ b/drivers/input/touchscreen/max11801_ts.c @@ -255,18 +255,7 @@ static struct i2c_driver max11801_ts_driver = { .remove = __devexit_p(max11801_ts_remove), }; -static int __init max11801_ts_init(void) -{ - return i2c_add_driver(&max11801_ts_driver); -} - -static void __exit max11801_ts_exit(void) -{ - i2c_del_driver(&max11801_ts_driver); -} - -module_init(max11801_ts_init); -module_exit(max11801_ts_exit); +module_i2c_driver(max11801_ts_driver); MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>"); MODULE_DESCRIPTION("Touchscreen driver for MAXI MAX11801 controller"); diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c index 2d84c80ceb66..b528511861ce 100644 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -302,18 +302,7 @@ static struct i2c_driver mcs5000_ts_driver = { .id_table = mcs5000_ts_id, }; -static int __init mcs5000_ts_init(void) -{ - return i2c_add_driver(&mcs5000_ts_driver); -} - -static void __exit mcs5000_ts_exit(void) -{ - i2c_del_driver(&mcs5000_ts_driver); -} - -module_init(mcs5000_ts_init); -module_exit(mcs5000_ts_exit); +module_i2c_driver(mcs5000_ts_driver); /* Module information */ MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index 5226194aa78e..c038db93e2c3 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -242,19 +242,8 @@ static struct i2c_driver migor_ts_driver = { .id_table = migor_ts_id, }; -static int __init migor_ts_init(void) -{ - return i2c_add_driver(&migor_ts_driver); -} - -static void __exit migor_ts_exit(void) -{ - i2c_del_driver(&migor_ts_driver); -} +module_i2c_driver(migor_ts_driver); MODULE_DESCRIPTION("MigoR Touchscreen driver"); MODULE_AUTHOR("Magnus Damm <damm@opensource.se>"); MODULE_LICENSE("GPL"); - -module_init(migor_ts_init); -module_exit(migor_ts_exit); diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index d5ac09a1ee56..72f6ba3a4709 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -222,17 +222,7 @@ static struct i2c_driver pixcir_i2c_ts_driver = { .id_table = pixcir_i2c_ts_id, }; -static int __init pixcir_i2c_ts_init(void) -{ - return i2c_add_driver(&pixcir_i2c_ts_driver); -} -module_init(pixcir_i2c_ts_init); - -static void __exit pixcir_i2c_ts_exit(void) -{ - i2c_del_driver(&pixcir_i2c_ts_driver); -} -module_exit(pixcir_i2c_ts_exit); +module_i2c_driver(pixcir_i2c_ts_driver); MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>"); MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver"); diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c index 8825fe37d433..cbbf71b22696 100644 --- a/drivers/input/touchscreen/st1232.c +++ b/drivers/input/touchscreen/st1232.c @@ -268,17 +268,7 @@ static struct i2c_driver st1232_ts_driver = { }, }; -static int __init st1232_ts_init(void) -{ - return i2c_add_driver(&st1232_ts_driver); -} -module_init(st1232_ts_init); - -static void __exit st1232_ts_exit(void) -{ - i2c_del_driver(&st1232_ts_driver); -} -module_exit(st1232_ts_exit); +module_i2c_driver(st1232_ts_driver); MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>"); MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c new file mode 100644 index 000000000000..d229c741d544 --- /dev/null +++ b/drivers/input/touchscreen/ti_tscadc.c @@ -0,0 +1,486 @@ +/* + * TI Touch Screen driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/input/ti_tscadc.h> +#include <linux/delay.h> + +#define REG_IRQEOI 0x020 +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_STEPCONFIG13 0x0C4 +#define REG_STEPDELAY13 0x0C8 +#define REG_STEPCONFIG14 0x0CC +#define REG_STEPDELAY14 0x0D0 +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +#define IRQWKUP_ENB BIT(0) +#define STPENB_STEPENB 0x7FFF +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) +#define STEPCONFIG_MODE_HWSYNC 0x2 +#define STEPCONFIG_SAMPLES_AVG (1 << 4) +#define STEPCONFIG_XPP (1 << 5) +#define STEPCONFIG_XNN (1 << 6) +#define STEPCONFIG_YPP (1 << 7) +#define STEPCONFIG_YNN (1 << 8) +#define STEPCONFIG_XNP (1 << 9) +#define STEPCONFIG_YPN (1 << 10) +#define STEPCONFIG_INM (1 << 18) +#define STEPCONFIG_INP (1 << 20) +#define STEPCONFIG_INP_5 (1 << 21) +#define STEPCONFIG_FIFO1 (1 << 26) +#define STEPCONFIG_OPENDLY 0xff +#define STEPCONFIG_Z1 (3 << 19) +#define STEPIDLE_INP (1 << 22) +#define STEPCHARGE_RFP (1 << 12) +#define STEPCHARGE_INM (1 << 15) +#define STEPCHARGE_INP (1 << 19) +#define STEPCHARGE_RFM (1 << 23) +#define STEPCHARGE_DELAY 0x1 +#define CNTRLREG_TSCSSENB (1 << 0) +#define CNTRLREG_STEPID (1 << 1) +#define CNTRLREG_STEPCONFIGWRT (1 << 2) +#define CNTRLREG_4WIRE (1 << 5) +#define CNTRLREG_5WIRE (1 << 6) +#define CNTRLREG_8WIRE (3 << 5) +#define CNTRLREG_TSCENB (1 << 7) +#define ADCFSM_STEPID 0x10 + +#define SEQ_SETTLE 275 +#define ADC_CLK 3000000 +#define MAX_12BIT ((1 << 12) - 1) +#define TSCADC_DELTA_X 15 +#define TSCADC_DELTA_Y 15 + +struct tscadc { + struct input_dev *input; + struct clk *tsc_ick; + void __iomem *tsc_base; + unsigned int irq; + unsigned int wires; + unsigned int x_plate_resistance; + bool pen_down; +}; + +static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg) +{ + return readl(ts->tsc_base + reg); +} + +static void tscadc_writel(struct tscadc *tsc, unsigned int reg, + unsigned int val) +{ + writel(val, tsc->tsc_base + reg); +} + +static void tscadc_step_config(struct tscadc *ts_dev) +{ + unsigned int config; + int i; + + /* Configure the Step registers */ + + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + case 5: + config |= STEPCONFIG_YNN | + STEPCONFIG_INP_5 | STEPCONFIG_XNN | + STEPCONFIG_YPP; + break; + case 8: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + } + + for (i = 1; i < 7; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN | + STEPCONFIG_INM | STEPCONFIG_FIFO1; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_YPP; + break; + case 5: + config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 | + STEPCONFIG_XNP | STEPCONFIG_YPN; + break; + case 8: + config |= STEPCONFIG_YPP; + break; + } + + for (i = 7; i < 13; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + /* Charge step configuration */ + config = STEPCONFIG_XPP | STEPCONFIG_YNN | + STEPCHARGE_RFP | STEPCHARGE_RFM | + STEPCHARGE_INM | STEPCHARGE_INP; + + tscadc_writel(ts_dev, REG_CHARGECONFIG, config); + tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY); + + config = 0; + /* Configure to calculate pressure */ + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP | + STEPCONFIG_XNN | STEPCONFIG_INM; + tscadc_writel(ts_dev, REG_STEPCONFIG13, config); + tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY); + + config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1; + tscadc_writel(ts_dev, REG_STEPCONFIG14, config); + tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); +} + +static void tscadc_idle_config(struct tscadc *ts_config) +{ + unsigned int idleconfig; + + idleconfig = STEPCONFIG_YNN | + STEPCONFIG_INM | + STEPCONFIG_YPN | STEPIDLE_INP; + tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig); +} + +static void tscadc_read_coordinates(struct tscadc *ts_dev, + unsigned int *x, unsigned int *y) +{ + unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT); + unsigned int prev_val_x = ~0, prev_val_y = ~0; + unsigned int prev_diff_x = ~0, prev_diff_y = ~0; + unsigned int read, diff; + unsigned int i; + + /* + * Delta filter is used to remove large variations in sampled + * values from ADC. The filter tries to predict where the next + * coordinate could be. This is done by taking a previous + * coordinate and subtracting it form current one. Further the + * algorithm compares the difference with that of a present value, + * if true the value is reported to the sub system. + */ + for (i = 0; i < fifocount - 1; i++) { + read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + diff = abs(read - prev_val_x); + if (diff < prev_diff_x) { + prev_diff_x = diff; + *x = read; + } + prev_val_x = read; + + read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + diff = abs(read - prev_val_y); + if (diff < prev_diff_y) { + prev_diff_y = diff; + *y = read; + } + prev_val_y = read; + } +} + +static irqreturn_t tscadc_irq(int irq, void *dev) +{ + struct tscadc *ts_dev = dev; + struct input_dev *input_dev = ts_dev->input; + unsigned int status, irqclr = 0; + unsigned int x = 0, y = 0; + unsigned int z1, z2, z; + unsigned int fsm; + + status = tscadc_readl(ts_dev, REG_IRQSTATUS); + if (status & IRQENB_FIFO1THRES) { + tscadc_read_coordinates(ts_dev, &x, &y); + + z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + + if (ts_dev->pen_down && z1 != 0 && z2 != 0) { + /* + * Calculate pressure using formula + * Resistance(touch) = x plate resistance * + * x postion/4096 * ((z2 / z1) - 1) + */ + z = z2 - z1; + z *= x; + z *= ts_dev->x_plate_resistance; + z /= z1; + z = (z + 2047) >> 12; + + if (z <= MAX_12BIT) { + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, z); + input_report_key(input_dev, BTN_TOUCH, 1); + input_sync(input_dev); + } + } + irqclr |= IRQENB_FIFO1THRES; + } + + /* + * Time for sequencer to settle, to read + * correct state of the sequencer. + */ + udelay(SEQ_SETTLE); + + status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS); + if (status & IRQENB_PENUP) { + /* Pen up event */ + fsm = tscadc_readl(ts_dev, REG_ADCFSM); + if (fsm == ADCFSM_STEPID) { + ts_dev->pen_down = false; + input_report_key(input_dev, BTN_TOUCH, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); + } else { + ts_dev->pen_down = true; + } + irqclr |= IRQENB_PENUP; + } + + tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr); + /* check pending interrupts */ + tscadc_writel(ts_dev, REG_IRQEOI, 0x0); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); + return IRQ_HANDLED; +} + +/* + * The functions for inserting/removing driver as a module. + */ + +static int __devinit tscadc_probe(struct platform_device *pdev) +{ + const struct tsc_data *pdata = pdev->dev.platform_data; + struct resource *res; + struct tscadc *ts_dev; + struct input_dev *input_dev; + struct clk *clk; + int err; + int clk_value, ctrl, irq; + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data.\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined.\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq ID is specified.\n"); + return -EINVAL; + } + + /* Allocate memory for device */ + ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts_dev || !input_dev) { + dev_err(&pdev->dev, "failed to allocate memory.\n"); + err = -ENOMEM; + goto err_free_mem; + } + + ts_dev->input = input_dev; + ts_dev->irq = irq; + ts_dev->wires = pdata->wires; + ts_dev->x_plate_resistance = pdata->x_plate_resistance; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to reserve registers.\n"); + err = -EBUSY; + goto err_free_mem; + } + + ts_dev->tsc_base = ioremap(res->start, resource_size(res)); + if (!ts_dev->tsc_base) { + dev_err(&pdev->dev, "failed to map registers.\n"); + err = -ENOMEM; + goto err_release_mem_region; + } + + err = request_irq(ts_dev->irq, tscadc_irq, + 0, pdev->dev.driver->name, ts_dev); + if (err) { + dev_err(&pdev->dev, "failed to allocate irq.\n"); + goto err_unmap_regs; + } + + ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick"); + if (IS_ERR(ts_dev->tsc_ick)) { + dev_err(&pdev->dev, "failed to get TSC ick\n"); + goto err_free_irq; + } + clk_enable(ts_dev->tsc_ick); + + clk = clk_get(&pdev->dev, "adc_tsc_fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get TSC fck\n"); + err = PTR_ERR(clk); + goto err_disable_clk; + } + + clk_value = clk_get_rate(clk) / ADC_CLK; + clk_put(clk); + + if (clk_value < 7) { + dev_err(&pdev->dev, "clock input less than min clock requirement\n"); + goto err_disable_clk; + } + /* CLKDIV needs to be configured to the value minus 1 */ + tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1); + + /* Enable wake-up of the SoC using touchscreen */ + tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); + + ctrl = CNTRLREG_STEPCONFIGWRT | + CNTRLREG_TSCENB | + CNTRLREG_STEPID; + switch (ts_dev->wires) { + case 4: + ctrl |= CNTRLREG_4WIRE; + break; + case 5: + ctrl |= CNTRLREG_5WIRE; + break; + case 8: + ctrl |= CNTRLREG_8WIRE; + break; + } + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + tscadc_idle_config(ts_dev); + tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES); + tscadc_step_config(ts_dev); + tscadc_writel(ts_dev, REG_FIFO1THR, 6); + + ctrl |= CNTRLREG_TSCSSENB; + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + input_dev->name = "ti-tsc-adc"; + input_dev->dev.parent = &pdev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + + /* register to the input system */ + err = input_register_device(input_dev); + if (err) + goto err_disable_clk; + + platform_set_drvdata(pdev, ts_dev); + return 0; + +err_disable_clk: + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); +err_free_irq: + free_irq(ts_dev->irq, ts_dev); +err_unmap_regs: + iounmap(ts_dev->tsc_base); +err_release_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input_dev); + kfree(ts_dev); + return err; +} + +static int __devexit tscadc_remove(struct platform_device *pdev) +{ + struct tscadc *ts_dev = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(ts_dev->irq, ts_dev); + + input_unregister_device(ts_dev->input); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(ts_dev->tsc_base); + release_mem_region(res->start, resource_size(res)); + + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); + + kfree(ts_dev); + + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver ti_tsc_driver = { + .probe = tscadc_probe, + .remove = __devexit_p(tscadc_remove), + .driver = { + .name = "tsc", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(ti_tsc_driver); + +MODULE_DESCRIPTION("TI touchscreen controller driver"); +MODULE_AUTHOR("Rachna Patil <rachna@ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index 067d95662997..b6adeaee9cc5 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -747,17 +747,7 @@ static struct spi_driver tsc2005_driver = { .remove = __devexit_p(tsc2005_remove), }; -static int __init tsc2005_init(void) -{ - return spi_register_driver(&tsc2005_driver); -} -module_init(tsc2005_init); - -static void __exit tsc2005_exit(void) -{ - spi_unregister_driver(&tsc2005_driver); -} -module_exit(tsc2005_exit); +module_spi_driver(tsc2005_driver); MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>"); MODULE_DESCRIPTION("TSC2005 Touchscreen Driver"); diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 1f674cb6c55b..1473d2382afd 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -399,18 +399,7 @@ static struct i2c_driver tsc2007_driver = { .remove = __devexit_p(tsc2007_remove), }; -static int __init tsc2007_init(void) -{ - return i2c_add_driver(&tsc2007_driver); -} - -static void __exit tsc2007_exit(void) -{ - i2c_del_driver(&tsc2007_driver); -} - -module_init(tsc2007_init); -module_exit(tsc2007_exit); +module_i2c_driver(tsc2007_driver); MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>"); MODULE_DESCRIPTION("TSC2007 TouchScreen Driver"); diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 3a5ebf452e81..22cd96f58c99 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -17,6 +17,7 @@ * - Zytronic capacitive touchscreen * - NEXIO/iNexio * - Elo TouchSystems 2700 IntelliTouch + * - EasyTouch USB Dual/Multi touch controller from Data Modul * * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -140,6 +141,7 @@ enum { DEVTYPE_TC45USB, DEVTYPE_NEXIO, DEVTYPE_ELO, + DEVTYPE_ETOUCH, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -245,6 +247,10 @@ static const struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH}, +#endif + {} }; @@ -326,6 +332,51 @@ static int egalax_get_pkt_len(unsigned char *buf, int len) } #endif +/***************************************************************************** + * EasyTouch part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif + +#define ETOUCH_PKT_TYPE_MASK 0xFE +#define ETOUCH_PKT_TYPE_REPT 0x80 +#define ETOUCH_PKT_TYPE_REPT2 0xB0 +#define ETOUCH_PKT_TYPE_DIAG 0x0A + +static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT && + (pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2) + return 0; + + dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int etouch_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & ETOUCH_PKT_TYPE_MASK) { + case ETOUCH_PKT_TYPE_REPT: + case ETOUCH_PKT_TYPE_REPT2: + return 5; + + case ETOUCH_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} +#endif /***************************************************************************** * PanJit Part @@ -1175,6 +1226,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .exit = nexio_exit, }, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + [DEVTYPE_ETOUCH] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = etouch_get_pkt_len, + .read_data = etouch_read_data, + }, +#endif }; |