diff options
Diffstat (limited to 'drivers/input/touchscreen')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 25 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 2 | ||||
| -rw-r--r-- | drivers/input/touchscreen/atmel_mxt_ts.c | 223 | ||||
| -rw-r--r-- | drivers/input/touchscreen/bu21029_ts.c | 484 | ||||
| -rw-r--r-- | drivers/input/touchscreen/eeti_ts.c | 37 | ||||
| -rw-r--r-- | drivers/input/touchscreen/egalax_ts.c | 5 | ||||
| -rw-r--r-- | drivers/input/touchscreen/elo.c | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/fsl-imx25-tcq.c | 21 | ||||
| -rw-r--r-- | drivers/input/touchscreen/gunze.c | 4 | ||||
| -rw-r--r-- | drivers/input/touchscreen/imx6ul_tsc.c | 14 | ||||
| -rw-r--r-- | drivers/input/touchscreen/raydium_i2c_ts.c | 4 | ||||
| -rw-r--r-- | drivers/input/touchscreen/resistive-adc-touch.c | 204 | ||||
| -rw-r--r-- | drivers/input/touchscreen/rohm_bu21023.c | 4 | ||||
| -rw-r--r-- | drivers/input/touchscreen/wdt87xx_i2c.c | 2 |
14 files changed, 875 insertions, 155 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 32267c1afebc..2a80675cfd94 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -92,6 +92,19 @@ config TOUCHSCREEN_AD7879_SPI To compile this driver as a module, choose M here: the module will be called ad7879-spi. +config TOUCHSCREEN_ADC + tristate "Generic ADC based resistive touchscreen" + depends on IIO + select IIO_BUFFER_CB + help + Say Y here if you want to use the generic ADC + resistive touchscreen driver. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called resistive-adc-touch.ko. + config TOUCHSCREEN_AR1021_I2C tristate "Microchip AR1020/1021 i2c touchscreen" depends on I2C && OF @@ -151,6 +164,18 @@ config TOUCHSCREEN_BU21013 To compile this driver as a module, choose M here: the module will be called bu21013_ts. +config TOUCHSCREEN_BU21029 + tristate "Rohm BU21029 based touch panel controllers" + depends on I2C + help + Say Y here if you have a Rohm BU21029 touchscreen controller + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called bu21029_ts. + config TOUCHSCREEN_CHIPONE_ICN8318 tristate "chipone icn8318 touchscreen controller" depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index fd4fd32fb73f..5911a4190cd2 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -13,11 +13,13 @@ obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o +obj-$(CONFIG_TOUCHSCREEN_ADC) += resistive-adc-touch.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o +obj-$(CONFIG_TOUCHSCREEN_BU21029) += bu21029_ts.o obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505) += chipone_icn8505.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 54fe190fd4bc..3232af5dcf89 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -75,6 +75,7 @@ #define MXT_SPT_DIGITIZER_T43 43 #define MXT_SPT_MESSAGECOUNT_T44 44 #define MXT_SPT_CTECONFIG_T46 46 +#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71 #define MXT_TOUCH_MULTITOUCHSCREEN_T100 100 /* MXT_GEN_MESSAGE_T5 object */ @@ -88,12 +89,12 @@ #define MXT_COMMAND_DIAGNOSTIC 5 /* Define for T6 status byte */ -#define MXT_T6_STATUS_RESET (1 << 7) -#define MXT_T6_STATUS_OFL (1 << 6) -#define MXT_T6_STATUS_SIGERR (1 << 5) -#define MXT_T6_STATUS_CAL (1 << 4) -#define MXT_T6_STATUS_CFGERR (1 << 3) -#define MXT_T6_STATUS_COMSERR (1 << 2) +#define MXT_T6_STATUS_RESET BIT(7) +#define MXT_T6_STATUS_OFL BIT(6) +#define MXT_T6_STATUS_SIGERR BIT(5) +#define MXT_T6_STATUS_CAL BIT(4) +#define MXT_T6_STATUS_CFGERR BIT(3) +#define MXT_T6_STATUS_COMSERR BIT(2) /* MXT_GEN_POWER_T7 field */ struct t7_config { @@ -112,14 +113,14 @@ struct t7_config { #define MXT_T9_RANGE 18 /* MXT_TOUCH_MULTI_T9 status */ -#define MXT_T9_UNGRIP (1 << 0) -#define MXT_T9_SUPPRESS (1 << 1) -#define MXT_T9_AMP (1 << 2) -#define MXT_T9_VECTOR (1 << 3) -#define MXT_T9_MOVE (1 << 4) -#define MXT_T9_RELEASE (1 << 5) -#define MXT_T9_PRESS (1 << 6) -#define MXT_T9_DETECT (1 << 7) +#define MXT_T9_UNGRIP BIT(0) +#define MXT_T9_SUPPRESS BIT(1) +#define MXT_T9_AMP BIT(2) +#define MXT_T9_VECTOR BIT(3) +#define MXT_T9_MOVE BIT(4) +#define MXT_T9_RELEASE BIT(5) +#define MXT_T9_PRESS BIT(6) +#define MXT_T9_DETECT BIT(7) struct t9_range { __le16 x; @@ -127,9 +128,9 @@ struct t9_range { } __packed; /* MXT_TOUCH_MULTI_T9 orient */ -#define MXT_T9_ORIENT_SWITCH (1 << 0) -#define MXT_T9_ORIENT_INVERTX (1 << 1) -#define MXT_T9_ORIENT_INVERTY (1 << 2) +#define MXT_T9_ORIENT_SWITCH BIT(0) +#define MXT_T9_ORIENT_INVERTX BIT(1) +#define MXT_T9_ORIENT_INVERTY BIT(2) /* MXT_SPT_COMMSCONFIG_T18 */ #define MXT_COMMS_CTRL 0 @@ -214,7 +215,7 @@ enum t100_type { #define MXT_FRAME_CRC_PASS 0x04 #define MXT_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */ #define MXT_BOOT_STATUS_MASK 0x3f -#define MXT_BOOT_EXTENDED_ID (1 << 5) +#define MXT_BOOT_EXTENDED_ID BIT(5) #define MXT_BOOT_ID_MASK 0x1f /* Touchscreen absolute values */ @@ -276,6 +277,19 @@ enum mxt_suspend_mode { MXT_SUSPEND_T9_CTRL = 1, }; +/* Config update context */ +struct mxt_cfg { + u8 *raw; + size_t raw_size; + off_t raw_pos; + + u8 *mem; + size_t mem_size; + int start_ofs; + + struct mxt_info info; +}; + /* Each client has this additional data */ struct mxt_data { struct i2c_client *client; @@ -317,6 +331,7 @@ struct mxt_data { u8 T6_reportid; u16 T6_address; u16 T7_address; + u16 T71_address; u8 T9_reportid_min; u8 T9_reportid_max; u8 T19_reportid; @@ -382,6 +397,7 @@ static bool mxt_object_readable(unsigned int type) case MXT_SPT_USERDATA_T38: case MXT_SPT_DIGITIZER_T43: case MXT_SPT_CTECONFIG_T46: + case MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71: return true; default: return false; @@ -712,13 +728,13 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg) u8 status = msg[1]; u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16); - complete(&data->crc_completion); - if (crc != data->config_crc) { data->config_crc = crc; dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc); } + complete(&data->crc_completion); + /* Detect reset */ if (status & MXT_T6_STATUS_RESET) complete(&data->reset_completion); @@ -827,6 +843,10 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message) mxt_input_sync(data); } + /* if active, pressure must be non-zero */ + if (!amplitude) + amplitude = MXT_PRESSURE_DEFAULT; + /* Touch active */ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1); input_report_abs(input_dev, ABS_MT_POSITION_X, x); @@ -1279,12 +1299,7 @@ static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off) return crc; } -static int mxt_prepare_cfg_mem(struct mxt_data *data, - const struct firmware *cfg, - unsigned int data_pos, - unsigned int cfg_start_ofs, - u8 *config_mem, - size_t config_mem_size) +static int mxt_prepare_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg) { struct device *dev = &data->client->dev; struct mxt_object *object; @@ -1295,9 +1310,9 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data, u16 reg; u8 val; - while (data_pos < cfg->size) { + while (cfg->raw_pos < cfg->raw_size) { /* Read type, instance, length */ - ret = sscanf(cfg->data + data_pos, "%x %x %x%n", + ret = sscanf(cfg->raw + cfg->raw_pos, "%x %x %x%n", &type, &instance, &size, &offset); if (ret == 0) { /* EOF */ @@ -1306,20 +1321,20 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data, dev_err(dev, "Bad format: failed to parse object\n"); return -EINVAL; } - data_pos += offset; + cfg->raw_pos += offset; object = mxt_get_object(data, type); if (!object) { /* Skip object */ for (i = 0; i < size; i++) { - ret = sscanf(cfg->data + data_pos, "%hhx%n", + ret = sscanf(cfg->raw + cfg->raw_pos, "%hhx%n", &val, &offset); if (ret != 1) { dev_err(dev, "Bad format in T%d at %d\n", type, i); return -EINVAL; } - data_pos += offset; + cfg->raw_pos += offset; } continue; } @@ -1354,7 +1369,7 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data, reg = object->start_address + mxt_obj_size(object) * instance; for (i = 0; i < size; i++) { - ret = sscanf(cfg->data + data_pos, "%hhx%n", + ret = sscanf(cfg->raw + cfg->raw_pos, "%hhx%n", &val, &offset); if (ret != 1) { @@ -1362,15 +1377,15 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data, type, i); return -EINVAL; } - data_pos += offset; + cfg->raw_pos += offset; if (i > mxt_obj_size(object)) continue; - byte_offset = reg + i - cfg_start_ofs; + byte_offset = reg + i - cfg->start_ofs; - if (byte_offset >= 0 && byte_offset < config_mem_size) { - *(config_mem + byte_offset) = val; + if (byte_offset >= 0 && byte_offset < cfg->mem_size) { + *(cfg->mem + byte_offset) = val; } else { dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n", reg, object->type, byte_offset); @@ -1382,22 +1397,21 @@ static int mxt_prepare_cfg_mem(struct mxt_data *data, return 0; } -static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start, - u8 *config_mem, size_t config_mem_size) +static int mxt_upload_cfg_mem(struct mxt_data *data, struct mxt_cfg *cfg) { unsigned int byte_offset = 0; int error; /* Write configuration as blocks */ - while (byte_offset < config_mem_size) { - unsigned int size = config_mem_size - byte_offset; + while (byte_offset < cfg->mem_size) { + unsigned int size = cfg->mem_size - byte_offset; if (size > MXT_MAX_BLOCK_WRITE) size = MXT_MAX_BLOCK_WRITE; error = __mxt_write_reg(data->client, - cfg_start + byte_offset, - size, config_mem + byte_offset); + cfg->start_ofs + byte_offset, + size, cfg->mem + byte_offset); if (error) { dev_err(&data->client->dev, "Config write error, ret=%d\n", error); @@ -1431,65 +1445,75 @@ static int mxt_init_t7_power_cfg(struct mxt_data *data); * <SIZE> - 2-byte object size as hex * <CONTENTS> - array of <SIZE> 1-byte hex values */ -static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) +static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw) { struct device *dev = &data->client->dev; - struct mxt_info cfg_info; + struct mxt_cfg cfg; int ret; int offset; - int data_pos; int i; - int cfg_start_ofs; u32 info_crc, config_crc, calculated_crc; - u8 *config_mem; - size_t config_mem_size; + u16 crc_start = 0; + + /* Make zero terminated copy of the OBP_RAW file */ + cfg.raw = kmemdup_nul(fw->data, fw->size, GFP_KERNEL); + if (!cfg.raw) + return -ENOMEM; + + cfg.raw_size = fw->size; mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1); - if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) { + if (strncmp(cfg.raw, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) { dev_err(dev, "Unrecognised config file\n"); - return -EINVAL; + ret = -EINVAL; + goto release_raw; } - data_pos = strlen(MXT_CFG_MAGIC); + cfg.raw_pos = strlen(MXT_CFG_MAGIC); /* Load information block and check */ for (i = 0; i < sizeof(struct mxt_info); i++) { - ret = sscanf(cfg->data + data_pos, "%hhx%n", - (unsigned char *)&cfg_info + i, + ret = sscanf(cfg.raw + cfg.raw_pos, "%hhx%n", + (unsigned char *)&cfg.info + i, &offset); if (ret != 1) { dev_err(dev, "Bad format\n"); - return -EINVAL; + ret = -EINVAL; + goto release_raw; } - data_pos += offset; + cfg.raw_pos += offset; } - if (cfg_info.family_id != data->info->family_id) { + if (cfg.info.family_id != data->info->family_id) { dev_err(dev, "Family ID mismatch!\n"); - return -EINVAL; + ret = -EINVAL; + goto release_raw; } - if (cfg_info.variant_id != data->info->variant_id) { + if (cfg.info.variant_id != data->info->variant_id) { dev_err(dev, "Variant ID mismatch!\n"); - return -EINVAL; + ret = -EINVAL; + goto release_raw; } /* Read CRCs */ - ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset); + ret = sscanf(cfg.raw + cfg.raw_pos, "%x%n", &info_crc, &offset); if (ret != 1) { dev_err(dev, "Bad format: failed to parse Info CRC\n"); - return -EINVAL; + ret = -EINVAL; + goto release_raw; } - data_pos += offset; + cfg.raw_pos += offset; - ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset); + ret = sscanf(cfg.raw + cfg.raw_pos, "%x%n", &config_crc, &offset); if (ret != 1) { dev_err(dev, "Bad format: failed to parse Config CRC\n"); - return -EINVAL; + ret = -EINVAL; + goto release_raw; } - data_pos += offset; + cfg.raw_pos += offset; /* * The Info Block CRC is calculated over mxt_info and the object @@ -1515,39 +1539,39 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) } /* Malloc memory to store configuration */ - cfg_start_ofs = MXT_OBJECT_START + + cfg.start_ofs = MXT_OBJECT_START + data->info->object_num * sizeof(struct mxt_object) + MXT_INFO_CHECKSUM_SIZE; - config_mem_size = data->mem_size - cfg_start_ofs; - config_mem = kzalloc(config_mem_size, GFP_KERNEL); - if (!config_mem) { - dev_err(dev, "Failed to allocate memory\n"); - return -ENOMEM; + cfg.mem_size = data->mem_size - cfg.start_ofs; + cfg.mem = kzalloc(cfg.mem_size, GFP_KERNEL); + if (!cfg.mem) { + ret = -ENOMEM; + goto release_raw; } - ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs, - config_mem, config_mem_size); + ret = mxt_prepare_cfg_mem(data, &cfg); if (ret) goto release_mem; /* Calculate crc of the received configs (not the raw config file) */ - if (data->T7_address < cfg_start_ofs) { - dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n", - data->T7_address, cfg_start_ofs); - ret = 0; - goto release_mem; - } + if (data->T71_address) + crc_start = data->T71_address; + else if (data->T7_address) + crc_start = data->T7_address; + else + dev_warn(dev, "Could not find CRC start\n"); - calculated_crc = mxt_calculate_crc(config_mem, - data->T7_address - cfg_start_ofs, - config_mem_size); + if (crc_start > cfg.start_ofs) { + calculated_crc = mxt_calculate_crc(cfg.mem, + crc_start - cfg.start_ofs, + cfg.mem_size); - if (config_crc > 0 && config_crc != calculated_crc) - dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n", - calculated_crc, config_crc); + if (config_crc > 0 && config_crc != calculated_crc) + dev_warn(dev, "Config CRC in file inconsistent, calculated=%06X, file=%06X\n", + calculated_crc, config_crc); + } - ret = mxt_upload_cfg_mem(data, cfg_start_ofs, - config_mem, config_mem_size); + ret = mxt_upload_cfg_mem(data, &cfg); if (ret) goto release_mem; @@ -1562,8 +1586,10 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) /* T7 config may have changed */ mxt_init_t7_power_cfg(data); +release_raw: + kfree(cfg.raw); release_mem: - kfree(config_mem); + kfree(cfg.mem); return ret; } @@ -1591,6 +1617,7 @@ static void mxt_free_object_table(struct mxt_data *data) data->T5_msg_size = 0; data->T6_reportid = 0; data->T7_address = 0; + data->T71_address = 0; data->T9_reportid_min = 0; data->T9_reportid_max = 0; data->T19_reportid = 0; @@ -1656,12 +1683,16 @@ static int mxt_parse_object_table(struct mxt_data *data, case MXT_GEN_POWER_T7: data->T7_address = object->start_address; break; + case MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71: + data->T71_address = object->start_address; + break; case MXT_TOUCH_MULTI_T9: data->multitouch = MXT_TOUCH_MULTI_T9; + /* Only handle messages from first T9 instance */ data->T9_reportid_min = min_id; - data->T9_reportid_max = max_id; - data->num_touchids = object->num_report_ids - * mxt_obj_instances(object); + data->T9_reportid_max = min_id + + object->num_report_ids - 1; + data->num_touchids = object->num_report_ids; break; case MXT_SPT_MESSAGECOUNT_T44: data->T44_address = object->start_address; @@ -1981,10 +2012,8 @@ static int mxt_initialize_input_device(struct mxt_data *data) /* Register input device */ input_dev = input_allocate_device(); - if (!input_dev) { - dev_err(dev, "Failed to allocate memory\n"); + if (!input_dev) return -ENOMEM; - } input_dev->name = "Atmel maXTouch Touchscreen"; input_dev->phys = data->phys; @@ -2055,12 +2084,6 @@ static int mxt_initialize_input_device(struct mxt_data *data) } if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && - data->t100_aux_ampl) { - input_set_abs_params(input_dev, ABS_MT_PRESSURE, - 0, 255, 0, 0); - } - - if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && data->t100_aux_vect) { input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 255, 0, 0); diff --git a/drivers/input/touchscreen/bu21029_ts.c b/drivers/input/touchscreen/bu21029_ts.c new file mode 100644 index 000000000000..49a8d4bbca3a --- /dev/null +++ b/drivers/input/touchscreen/bu21029_ts.c @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Rohm BU21029 touchscreen controller driver + * + * Copyright (C) 2015-2018 Bosch Sicherheitssysteme GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/timer.h> + +/* + * HW_ID1 Register (PAGE=0, ADDR=0x0E, Reset value=0x02, Read only) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | HW_IDH | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * HW_ID2 Register (PAGE=0, ADDR=0x0F, Reset value=0x29, Read only) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | HW_IDL | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * HW_IDH: high 8bits of IC's ID + * HW_IDL: low 8bits of IC's ID + */ +#define BU21029_HWID_REG (0x0E << 3) +#define SUPPORTED_HWID 0x0229 + +/* + * CFR0 Register (PAGE=0, ADDR=0x00, Reset value=0x20) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | 0 | 0 | CALIB | INTRM | 0 | 0 | 0 | 0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * CALIB: 0 = not to use calibration result (*) + * 1 = use calibration result + * INTRM: 0 = INT output depend on "pen down" (*) + * 1 = INT output always "0" + */ +#define BU21029_CFR0_REG (0x00 << 3) +#define CFR0_VALUE 0x00 + +/* + * CFR1 Register (PAGE=0, ADDR=0x01, Reset value=0xA6) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | MAV | AVE[2:0] | 0 | SMPL[2:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * MAV: 0 = median average filter off + * 1 = median average filter on (*) + * AVE: AVE+1 = number of average samples for MAV, + * if AVE>SMPL, then AVE=SMPL (=3) + * SMPL: SMPL+1 = number of conversion samples for MAV (=7) + */ +#define BU21029_CFR1_REG (0x01 << 3) +#define CFR1_VALUE 0xA6 + +/* + * CFR2 Register (PAGE=0, ADDR=0x02, Reset value=0x04) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | INTVL_TIME[3:0] | TIME_ST_ADC[3:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * INTVL_TIME: waiting time between completion of conversion + * and start of next conversion, only usable in + * autoscan mode (=20.480ms) + * TIME_ST_ADC: waiting time between application of voltage + * to panel and start of A/D conversion (=100us) + */ +#define BU21029_CFR2_REG (0x02 << 3) +#define CFR2_VALUE 0xC9 + +/* + * CFR3 Register (PAGE=0, ADDR=0x0B, Reset value=0x72) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | RM8 | STRETCH| PU90K | DUAL | PIDAC_OFS[3:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * RM8: 0 = coordinate resolution is 12bit (*) + * 1 = coordinate resolution is 8bit + * STRETCH: 0 = SCL_STRETCH function off + * 1 = SCL_STRETCH function on (*) + * PU90K: 0 = internal pull-up resistance for touch detection is ~50kohms (*) + * 1 = internal pull-up resistance for touch detection is ~90kohms + * DUAL: 0 = dual touch detection off (*) + * 1 = dual touch detection on + * PIDAC_OFS: dual touch detection circuit adjustment, it is not necessary + * to change this from initial value + */ +#define BU21029_CFR3_REG (0x0B << 3) +#define CFR3_VALUE 0x42 + +/* + * LDO Register (PAGE=0, ADDR=0x0C, Reset value=0x00) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | 0 | PVDD[2:0] | 0 | AVDD[2:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * PVDD: output voltage of panel output regulator (=2.000V) + * AVDD: output voltage of analog circuit regulator (=2.000V) + */ +#define BU21029_LDO_REG (0x0C << 3) +#define LDO_VALUE 0x77 + +/* + * Serial Interface Command Byte 1 (CID=1) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | 1 | CF | CMSK | PDM | STP | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * CF: conversion function, see table 3 in datasheet p6 (=0000, automatic scan) + * CMSK: 0 = executes convert function (*) + * 1 = reads the convert result + * PDM: 0 = power down after convert function stops (*) + * 1 = keep power on after convert function stops + * STP: 1 = abort current conversion and power down, set to "0" automatically + */ +#define BU21029_AUTOSCAN 0x80 + +/* + * The timeout value needs to be larger than INTVL_TIME + tConv4 (sample and + * conversion time), where tConv4 is calculated by formula: + * tPON + tDLY1 + (tTIME_ST_ADC + (tADC * tSMPL) * 2 + tDLY2) * 3 + * see figure 8 in datasheet p15 for details of each field. + */ +#define PEN_UP_TIMEOUT_MS 50 + +#define STOP_DELAY_MIN_US 50 +#define STOP_DELAY_MAX_US 1000 +#define START_DELAY_MS 2 +#define BUF_LEN 8 +#define SCALE_12BIT (1 << 12) +#define MAX_12BIT ((1 << 12) - 1) +#define DRIVER_NAME "bu21029" + +struct bu21029_ts_data { + struct i2c_client *client; + struct input_dev *in_dev; + struct timer_list timer; + struct regulator *vdd; + struct gpio_desc *reset_gpios; + u32 x_plate_ohms; + struct touchscreen_properties prop; +}; + +static void bu21029_touch_report(struct bu21029_ts_data *bu21029, const u8 *buf) +{ + u16 x, y, z1, z2; + u32 rz; + s32 max_pressure = input_abs_get_max(bu21029->in_dev, ABS_PRESSURE); + + /* + * compose upper 8 and lower 4 bits into a 12bit value: + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + * | ByteH | ByteL | + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + * |b07|b06|b05|b04|b03|b02|b01|b00|b07|b06|b05|b04|b03|b02|b01|b00| + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + * |v11|v10|v09|v08|v07|v06|v05|v04|v03|v02|v01|v00| 0 | 0 | 0 | 0 | + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + */ + x = (buf[0] << 4) | (buf[1] >> 4); + y = (buf[2] << 4) | (buf[3] >> 4); + z1 = (buf[4] << 4) | (buf[5] >> 4); + z2 = (buf[6] << 4) | (buf[7] >> 4); + + if (z1 && z2) { + /* + * calculate Rz (pressure resistance value) by equation: + * Rz = Rx * (x/Q) * ((z2/z1) - 1), where + * Rx is x-plate resistance, + * Q is the touch screen resolution (8bit = 256, 12bit = 4096) + * x, z1, z2 are the measured positions. + */ + rz = z2 - z1; + rz *= x; + rz *= bu21029->x_plate_ohms; + rz /= z1; + rz = DIV_ROUND_CLOSEST(rz, SCALE_12BIT); + if (rz <= max_pressure) { + touchscreen_report_pos(bu21029->in_dev, &bu21029->prop, + x, y, false); + input_report_abs(bu21029->in_dev, ABS_PRESSURE, + max_pressure - rz); + input_report_key(bu21029->in_dev, BTN_TOUCH, 1); + input_sync(bu21029->in_dev); + } + } +} + +static void bu21029_touch_release(struct timer_list *t) +{ + struct bu21029_ts_data *bu21029 = from_timer(bu21029, t, timer); + + input_report_abs(bu21029->in_dev, ABS_PRESSURE, 0); + input_report_key(bu21029->in_dev, BTN_TOUCH, 0); + input_sync(bu21029->in_dev); +} + +static irqreturn_t bu21029_touch_soft_irq(int irq, void *data) +{ + struct bu21029_ts_data *bu21029 = data; + u8 buf[BUF_LEN]; + int error; + + /* + * Read touch data and deassert interrupt (will assert again after + * INTVL_TIME + tConv4 for continuous touch) + */ + error = i2c_smbus_read_i2c_block_data(bu21029->client, BU21029_AUTOSCAN, + sizeof(buf), buf); + if (error < 0) + goto out; + + bu21029_touch_report(bu21029, buf); + + /* reset timer for pen up detection */ + mod_timer(&bu21029->timer, + jiffies + msecs_to_jiffies(PEN_UP_TIMEOUT_MS)); + +out: + return IRQ_HANDLED; +} + +static void bu21029_put_chip_in_reset(struct bu21029_ts_data *bu21029) +{ + if (bu21029->reset_gpios) { + gpiod_set_value_cansleep(bu21029->reset_gpios, 1); + usleep_range(STOP_DELAY_MIN_US, STOP_DELAY_MAX_US); + } +} + +static int bu21029_start_chip(struct input_dev *dev) +{ + struct bu21029_ts_data *bu21029 = input_get_drvdata(dev); + struct i2c_client *i2c = bu21029->client; + struct { + u8 reg; + u8 value; + } init_table[] = { + {BU21029_CFR0_REG, CFR0_VALUE}, + {BU21029_CFR1_REG, CFR1_VALUE}, + {BU21029_CFR2_REG, CFR2_VALUE}, + {BU21029_CFR3_REG, CFR3_VALUE}, + {BU21029_LDO_REG, LDO_VALUE} + }; + int error, i; + __be16 hwid; + + error = regulator_enable(bu21029->vdd); + if (error) { + dev_err(&i2c->dev, "failed to power up chip: %d", error); + return error; + } + + /* take chip out of reset */ + if (bu21029->reset_gpios) { + gpiod_set_value_cansleep(bu21029->reset_gpios, 0); + msleep(START_DELAY_MS); + } + + error = i2c_smbus_read_i2c_block_data(i2c, BU21029_HWID_REG, + sizeof(hwid), (u8 *)&hwid); + if (error < 0) { + dev_err(&i2c->dev, "failed to read HW ID\n"); + goto err_out; + } + + if (be16_to_cpu(hwid) != SUPPORTED_HWID) { + dev_err(&i2c->dev, + "unsupported HW ID 0x%x\n", be16_to_cpu(hwid)); + error = -ENODEV; + goto err_out; + } + + for (i = 0; i < ARRAY_SIZE(init_table); ++i) { + error = i2c_smbus_write_byte_data(i2c, + init_table[i].reg, + init_table[i].value); + if (error < 0) { + dev_err(&i2c->dev, + "failed to write %#02x to register %#02x: %d\n", + init_table[i].value, init_table[i].reg, + error); + goto err_out; + } + } + + error = i2c_smbus_write_byte(i2c, BU21029_AUTOSCAN); + if (error < 0) { + dev_err(&i2c->dev, "failed to start autoscan\n"); + goto err_out; + } + + enable_irq(bu21029->client->irq); + return 0; + +err_out: + bu21029_put_chip_in_reset(bu21029); + regulator_disable(bu21029->vdd); + return error; +} + +static void bu21029_stop_chip(struct input_dev *dev) +{ + struct bu21029_ts_data *bu21029 = input_get_drvdata(dev); + + disable_irq(bu21029->client->irq); + del_timer_sync(&bu21029->timer); + + bu21029_put_chip_in_reset(bu21029); + regulator_disable(bu21029->vdd); +} + +static int bu21029_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bu21029_ts_data *bu21029; + struct input_dev *in_dev; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + dev_err(&client->dev, + "i2c functionality support is not sufficient\n"); + return -EIO; + } + + bu21029 = devm_kzalloc(&client->dev, sizeof(*bu21029), GFP_KERNEL); + if (!bu21029) + return -ENOMEM; + + error = device_property_read_u32(&client->dev, "rohm,x-plate-ohms", + &bu21029->x_plate_ohms); + if (error) { + dev_err(&client->dev, + "invalid 'x-plate-ohms' supplied: %d\n", error); + return error; + } + + bu21029->vdd = devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(bu21029->vdd)) { + error = PTR_ERR(bu21029->vdd); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "failed to acquire 'vdd' supply: %d\n", error); + return error; + } + + bu21029->reset_gpios = devm_gpiod_get_optional(&client->dev, + "reset", GPIOD_OUT_HIGH); + if (IS_ERR(bu21029->reset_gpios)) { + error = PTR_ERR(bu21029->reset_gpios); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "failed to acquire 'reset' gpio: %d\n", error); + return error; + } + + in_dev = devm_input_allocate_device(&client->dev); + if (!in_dev) { + dev_err(&client->dev, "unable to allocate input device\n"); + return -ENOMEM; + } + + bu21029->client = client; + bu21029->in_dev = in_dev; + timer_setup(&bu21029->timer, bu21029_touch_release, 0); + + in_dev->name = DRIVER_NAME; + in_dev->id.bustype = BUS_I2C; + in_dev->open = bu21029_start_chip; + in_dev->close = bu21029_stop_chip; + + input_set_capability(in_dev, EV_KEY, BTN_TOUCH); + input_set_abs_params(in_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(in_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(in_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + touchscreen_parse_properties(in_dev, false, &bu21029->prop); + + input_set_drvdata(in_dev, bu21029); + + irq_set_status_flags(client->irq, IRQ_NOAUTOEN); + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, bu21029_touch_soft_irq, + IRQF_ONESHOT, DRIVER_NAME, bu21029); + if (error) { + dev_err(&client->dev, + "unable to request touch irq: %d\n", error); + return error; + } + + error = input_register_device(in_dev); + if (error) { + dev_err(&client->dev, + "unable to register input device: %d\n", error); + return error; + } + + i2c_set_clientdata(client, bu21029); + + return 0; +} + +static int __maybe_unused bu21029_suspend(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct bu21029_ts_data *bu21029 = i2c_get_clientdata(i2c); + + if (!device_may_wakeup(dev)) { + mutex_lock(&bu21029->in_dev->mutex); + if (bu21029->in_dev->users) + bu21029_stop_chip(bu21029->in_dev); + mutex_unlock(&bu21029->in_dev->mutex); + } + + return 0; +} + +static int __maybe_unused bu21029_resume(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct bu21029_ts_data *bu21029 = i2c_get_clientdata(i2c); + + if (!device_may_wakeup(dev)) { + mutex_lock(&bu21029->in_dev->mutex); + if (bu21029->in_dev->users) + bu21029_start_chip(bu21029->in_dev); + mutex_unlock(&bu21029->in_dev->mutex); + } + + return 0; +} +static SIMPLE_DEV_PM_OPS(bu21029_pm_ops, bu21029_suspend, bu21029_resume); + +static const struct i2c_device_id bu21029_ids[] = { + { DRIVER_NAME, 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, bu21029_ids); + +#ifdef CONFIG_OF +static const struct of_device_id bu21029_of_ids[] = { + { .compatible = "rohm,bu21029" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, bu21029_of_ids); +#endif + +static struct i2c_driver bu21029_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(bu21029_of_ids), + .pm = &bu21029_pm_ops, + }, + .id_table = bu21029_ids, + .probe = bu21029_probe, +}; +module_i2c_driver(bu21029_driver); + +MODULE_AUTHOR("Zhu Yi <yi.zhu5@cn.bosch.com>"); +MODULE_DESCRIPTION("Rohm BU21029 touchscreen controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 2facad75eb6d..7fe41965c5d1 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -1,9 +1,9 @@ /* * Touch Screen driver for EETI's I2C connected touch screen panels - * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * Copyright (c) 2009,2018 Daniel Mack <daniel@zonque.org> * * See EETI's software guide for the protocol specification: - * http://home.eeti.com.tw/web20/eg/guide.htm + * http://home.eeti.com.tw/documentation.html * * Based on migor_ts.c * Copyright (c) 2008 Magnus Damm @@ -25,28 +25,22 @@ */ #include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/input.h> +#include <linux/input/touchscreen.h> #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/timer.h> #include <linux/gpio/consumer.h> +#include <linux/of.h> #include <linux/slab.h> #include <asm/unaligned.h> -static bool flip_x; -module_param(flip_x, bool, 0644); -MODULE_PARM_DESC(flip_x, "flip x coordinate"); - -static bool flip_y; -module_param(flip_y, bool, 0644); -MODULE_PARM_DESC(flip_y, "flip y coordinate"); - struct eeti_ts { struct i2c_client *client; struct input_dev *input; struct gpio_desc *attn_gpio; + struct touchscreen_properties props; bool running; }; @@ -73,17 +67,10 @@ static void eeti_ts_report_event(struct eeti_ts *eeti, u8 *buf) x >>= res - EETI_TS_BITDEPTH; y >>= res - EETI_TS_BITDEPTH; - if (flip_x) - x = EETI_MAXVAL - x; - - if (flip_y) - y = EETI_MAXVAL - y; - if (buf[0] & REPORT_BIT_HAS_PRESSURE) input_report_abs(eeti->input, ABS_PRESSURE, buf[5]); - input_report_abs(eeti->input, ABS_X, x); - input_report_abs(eeti->input, ABS_Y, y); + touchscreen_report_pos(eeti->input, &eeti->props, x, y, false); input_report_key(eeti->input, BTN_TOUCH, buf[0] & REPORT_BIT_PRESSED); input_sync(eeti->input); } @@ -178,6 +165,8 @@ static int eeti_ts_probe(struct i2c_client *client, input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0); input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0); + touchscreen_parse_properties(input, false, &eeti->props); + input->name = client->name; input->id.bustype = BUS_I2C; input->open = eeti_ts_open; @@ -262,10 +251,18 @@ static const struct i2c_device_id eeti_ts_id[] = { }; MODULE_DEVICE_TABLE(i2c, eeti_ts_id); +#ifdef CONFIG_OF +static const struct of_device_id of_eeti_ts_match[] = { + { .compatible = "eeti,exc3000-i2c", }, + { } +}; +#endif + static struct i2c_driver eeti_ts_driver = { .driver = { .name = "eeti_ts", .pm = &eeti_ts_pm, + .of_match_table = of_match_ptr(of_eeti_ts_match), }, .probe = eeti_ts_probe, .id_table = eeti_ts_id, @@ -274,5 +271,5 @@ static struct i2c_driver eeti_ts_driver = { module_i2c_driver(eeti_ts_driver); MODULE_DESCRIPTION("EETI Touchscreen driver"); -MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); +MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index 752ae9cf4514..80e69bb8283e 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for EETI eGalax Multiple Touch Controller * * Copyright (C) 2011 Freescale Semiconductor, Inc. * * based on max11801_ts.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /* EETI eGalax serial touch screen controller is a I2C based multiple diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index 83433e8efff7..7f2942f3cec6 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -352,6 +352,7 @@ static int elo_connect(struct serio *serio, struct serio_driver *drv) case 1: /* 6-byte protocol */ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0); + /* fall through */ case 2: /* 4-byte protocol */ input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0); diff --git a/drivers/input/touchscreen/fsl-imx25-tcq.c b/drivers/input/touchscreen/fsl-imx25-tcq.c index 47fe1f184bbc..1d6c8f490b40 100644 --- a/drivers/input/touchscreen/fsl-imx25-tcq.c +++ b/drivers/input/touchscreen/fsl-imx25-tcq.c @@ -1,16 +1,11 @@ -/* - * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - * - * Based on driver from 2011: - * Juergen Beisert, Pengutronix <kernel@pengutronix.de> - * - * This is the driver for the imx25 TCQ (Touchscreen Conversion Queue) - * connected to the imx25 ADC. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> +// Based on driver from 2011: +// Juergen Beisert, Pengutronix <kernel@pengutronix.de> +// +// This is the driver for the imx25 TCQ (Touchscreen Conversion Queue) +// connected to the imx25 ADC. #include <linux/clk.h> #include <linux/device.h> diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c index 481586909d28..054c2537b392 100644 --- a/drivers/input/touchscreen/gunze.c +++ b/drivers/input/touchscreen/gunze.c @@ -20,10 +20,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ #include <linux/errno.h> diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c index ee82a975bfd2..c10fc594f94d 100644 --- a/drivers/input/touchscreen/imx6ul_tsc.c +++ b/drivers/input/touchscreen/imx6ul_tsc.c @@ -1,12 +1,8 @@ -/* - * Freescale i.MX6UL touchscreen controller driver - * - * Copyright (C) 2015 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Freescale i.MX6UL touchscreen controller driver +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. #include <linux/errno.h> #include <linux/kernel.h> diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c index d1c09e6a2cb6..c89853a36f9e 100644 --- a/drivers/input/touchscreen/raydium_i2c_ts.c +++ b/drivers/input/touchscreen/raydium_i2c_ts.c @@ -466,7 +466,7 @@ static bool raydium_i2c_boot_trigger(struct i2c_client *client) } } - return 0; + return false; } static bool raydium_i2c_fw_trigger(struct i2c_client *client) @@ -492,7 +492,7 @@ static bool raydium_i2c_fw_trigger(struct i2c_client *client) } } - return 0; + return false; } static int raydium_i2c_check_path(struct i2c_client *client) diff --git a/drivers/input/touchscreen/resistive-adc-touch.c b/drivers/input/touchscreen/resistive-adc-touch.c new file mode 100644 index 000000000000..cfc8bb4553f7 --- /dev/null +++ b/drivers/input/touchscreen/resistive-adc-touch.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ADC generic resistive touchscreen (GRTS) + * This is a generic input driver that connects to an ADC + * given the channels in device tree, and reports events to the input + * subsystem. + * + * Copyright (C) 2017,2018 Microchip Technology, + * Author: Eugen Hristev <eugen.hristev@microchip.com> + * + */ +#include <linux/input.h> +#include <linux/input/touchscreen.h> +#include <linux/iio/consumer.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#define DRIVER_NAME "resistive-adc-touch" +#define GRTS_DEFAULT_PRESSURE_MIN 50000 +#define GRTS_MAX_POS_MASK GENMASK(11, 0) + +/** + * grts_state - generic resistive touch screen information struct + * @pressure_min: number representing the minimum for the pressure + * @pressure: are we getting pressure info or not + * @iio_chans: list of channels acquired + * @iio_cb: iio_callback buffer for the data + * @input: the input device structure that we register + * @prop: touchscreen properties struct + */ +struct grts_state { + u32 pressure_min; + bool pressure; + struct iio_channel *iio_chans; + struct iio_cb_buffer *iio_cb; + struct input_dev *input; + struct touchscreen_properties prop; +}; + +static int grts_cb(const void *data, void *private) +{ + const u16 *touch_info = data; + struct grts_state *st = private; + unsigned int x, y, press = 0x0; + + /* channel data coming in buffer in the order below */ + x = touch_info[0]; + y = touch_info[1]; + if (st->pressure) + press = touch_info[2]; + + if ((!x && !y) || (st->pressure && (press < st->pressure_min))) { + /* report end of touch */ + input_report_key(st->input, BTN_TOUCH, 0); + input_sync(st->input); + return 0; + } + + /* report proper touch to subsystem*/ + touchscreen_report_pos(st->input, &st->prop, x, y, false); + if (st->pressure) + input_report_abs(st->input, ABS_PRESSURE, press); + input_report_key(st->input, BTN_TOUCH, 1); + input_sync(st->input); + + return 0; +} + +static int grts_open(struct input_dev *dev) +{ + int error; + struct grts_state *st = input_get_drvdata(dev); + + error = iio_channel_start_all_cb(st->iio_cb); + if (error) { + dev_err(dev->dev.parent, "failed to start callback buffer.\n"); + return error; + } + return 0; +} + +static void grts_close(struct input_dev *dev) +{ + struct grts_state *st = input_get_drvdata(dev); + + iio_channel_stop_all_cb(st->iio_cb); +} + +static void grts_disable(void *data) +{ + iio_channel_release_all_cb(data); +} + +static int grts_probe(struct platform_device *pdev) +{ + struct grts_state *st; + struct input_dev *input; + struct device *dev = &pdev->dev; + struct iio_channel *chan; + int error; + + st = devm_kzalloc(dev, sizeof(struct grts_state), GFP_KERNEL); + if (!st) + return -ENOMEM; + + /* get the channels from IIO device */ + st->iio_chans = devm_iio_channel_get_all(dev); + if (IS_ERR(st->iio_chans)) { + error = PTR_ERR(st->iio_chans); + if (error != -EPROBE_DEFER) + dev_err(dev, "can't get iio channels.\n"); + return error; + } + + chan = &st->iio_chans[0]; + st->pressure = false; + while (chan && chan->indio_dev) { + if (!strcmp(chan->channel->datasheet_name, "pressure")) + st->pressure = true; + chan++; + } + + if (st->pressure) { + error = device_property_read_u32(dev, + "touchscreen-min-pressure", + &st->pressure_min); + if (error) { + dev_dbg(dev, "can't get touchscreen-min-pressure property.\n"); + st->pressure_min = GRTS_DEFAULT_PRESSURE_MIN; + } + } + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "failed to allocate input device.\n"); + return -ENOMEM; + } + + input->name = DRIVER_NAME; + input->id.bustype = BUS_HOST; + input->open = grts_open; + input->close = grts_close; + + input_set_abs_params(input, ABS_X, 0, GRTS_MAX_POS_MASK - 1, 0, 0); + input_set_abs_params(input, ABS_Y, 0, GRTS_MAX_POS_MASK - 1, 0, 0); + if (st->pressure) + input_set_abs_params(input, ABS_PRESSURE, st->pressure_min, + 0xffff, 0, 0); + + input_set_capability(input, EV_KEY, BTN_TOUCH); + + /* parse optional device tree properties */ + touchscreen_parse_properties(input, false, &st->prop); + + st->input = input; + input_set_drvdata(input, st); + + error = input_register_device(input); + if (error) { + dev_err(dev, "failed to register input device."); + return error; + } + + st->iio_cb = iio_channel_get_all_cb(dev, grts_cb, st); + if (IS_ERR(st->iio_cb)) { + dev_err(dev, "failed to allocate callback buffer.\n"); + return PTR_ERR(st->iio_cb); + } + + error = devm_add_action_or_reset(dev, grts_disable, st->iio_cb); + if (error) { + dev_err(dev, "failed to add disable action.\n"); + return error; + } + + return 0; +} + +static const struct of_device_id grts_of_match[] = { + { + .compatible = "resistive-adc-touch", + }, { + /* sentinel */ + }, +}; + +MODULE_DEVICE_TABLE(of, grts_of_match); + +static struct platform_driver grts_driver = { + .probe = grts_probe, + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(grts_of_match), + }, +}; + +module_platform_driver(grts_driver); + +MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>"); +MODULE_DESCRIPTION("Generic ADC Resistive Touch Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c index bda0500c9b57..714affdd742f 100644 --- a/drivers/input/touchscreen/rohm_bu21023.c +++ b/drivers/input/touchscreen/rohm_bu21023.c @@ -304,7 +304,7 @@ static int rohm_i2c_burst_read(struct i2c_client *client, u8 start, void *buf, msg[1].len = len; msg[1].buf = buf; - i2c_lock_adapter(adap); + i2c_lock_bus(adap, I2C_LOCK_SEGMENT); for (i = 0; i < 2; i++) { if (__i2c_transfer(adap, &msg[i], 1) < 0) { @@ -313,7 +313,7 @@ static int rohm_i2c_burst_read(struct i2c_client *client, u8 start, void *buf, } } - i2c_unlock_adapter(adap); + i2c_unlock_bus(adap, I2C_LOCK_SEGMENT); return ret; } diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c index 20f7f3902757..166edeb77776 100644 --- a/drivers/input/touchscreen/wdt87xx_i2c.c +++ b/drivers/input/touchscreen/wdt87xx_i2c.c @@ -1142,7 +1142,7 @@ static int __maybe_unused wdt87xx_resume(struct device *dev) * The chip may have been reset while system is resuming, * give it some time to settle. */ - mdelay(100); + msleep(100); error = wdt87xx_send_command(client, VND_CMD_START, 0); if (error) |