diff options
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r-- | drivers/input/touchscreen/Kconfig | 6 | ||||
-rw-r--r-- | drivers/input/touchscreen/ar1021_i2c.c | 4 | ||||
-rw-r--r-- | drivers/input/touchscreen/atmel_mxt_ts.c | 4 | ||||
-rw-r--r-- | drivers/input/touchscreen/colibri-vf50-ts.c | 1 | ||||
-rw-r--r-- | drivers/input/touchscreen/cyttsp4_core.c | 7 | ||||
-rw-r--r-- | drivers/input/touchscreen/edt-ft5x06.c | 30 | ||||
-rw-r--r-- | drivers/input/touchscreen/ili210x.c | 418 | ||||
-rw-r--r-- | drivers/input/touchscreen/mms114.c | 3 | ||||
-rw-r--r-- | drivers/input/touchscreen/pixcir_i2c_ts.c | 177 | ||||
-rw-r--r-- | drivers/input/touchscreen/raspberrypi-ts.c | 38 | ||||
-rw-r--r-- | drivers/input/touchscreen/s3c2410_ts.c | 1 | ||||
-rw-r--r-- | drivers/input/touchscreen/st1232.c | 182 | ||||
-rw-r--r-- | drivers/input/touchscreen/sur40.c | 92 | ||||
-rw-r--r-- | drivers/input/touchscreen/tps6507x-ts.c | 36 | ||||
-rw-r--r-- | drivers/input/touchscreen/ts4800-ts.c | 68 | ||||
-rw-r--r-- | drivers/input/touchscreen/wacom_i2c.c | 1 |
16 files changed, 584 insertions, 484 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 46ad9090493b..c071f7c407b6 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -633,7 +633,7 @@ config TOUCHSCREEN_HP600 depends on SH_HP6XX && SH_ADC help Say Y here if you have a HP Jornada 620/660/680/690 and want to - support the built-in touchscreen. + support the built-in touchscreen. To compile this driver as a module, choose M here: the module will be called hp680_ts_input. @@ -700,7 +700,6 @@ config TOUCHSCREEN_EDT_FT5X06 config TOUCHSCREEN_RASPBERRYPI_FW tristate "Raspberry Pi's firmware base touch screen support" depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) - select INPUT_POLLDEV help Say Y here if you have the official Raspberry Pi 7 inch screen on your system. @@ -1038,7 +1037,6 @@ config TOUCHSCREEN_TS4800 depends on HAS_IOMEM && OF depends on SOC_IMX51 || COMPILE_TEST select MFD_SYSCON - select INPUT_POLLDEV help Say Y here if you have a touchscreen on a TS-4800 board. @@ -1210,7 +1208,6 @@ config TOUCHSCREEN_SUR40 tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen" depends on USB && MEDIA_USB_SUPPORT && HAS_DMA depends on VIDEO_V4L2 - select INPUT_POLLDEV select VIDEOBUF2_DMA_SG help Say Y here if you want support for the Samsung SUR40 touchscreen @@ -1246,7 +1243,6 @@ config TOUCHSCREEN_SX8654 config TOUCHSCREEN_TPS6507X tristate "TPS6507x based touchscreens" depends on I2C - select INPUT_POLLDEV help Say Y here if you have a TPS6507x based touchscreen controller. diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c index 28644f372bd8..c0d5c2413356 100644 --- a/drivers/input/touchscreen/ar1021_i2c.c +++ b/drivers/input/touchscreen/ar1021_i2c.c @@ -13,7 +13,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> -#define AR1021_TOCUH_PKG_SIZE 5 +#define AR1021_TOUCH_PKG_SIZE 5 #define AR1021_MAX_X 4095 #define AR1021_MAX_Y 4095 @@ -25,7 +25,7 @@ struct ar1021_i2c { struct i2c_client *client; struct input_dev *input; - u8 data[AR1021_TOCUH_PKG_SIZE]; + u8 data[AR1021_TOUCH_PKG_SIZE]; }; static irqreturn_t ar1021_i2c_irq(int irq, void *dev_id) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 24c4b691b1c9..ae60442efda0 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -3156,6 +3156,8 @@ static int __maybe_unused mxt_suspend(struct device *dev) mutex_unlock(&input_dev->mutex); + disable_irq(data->irq); + return 0; } @@ -3168,6 +3170,8 @@ static int __maybe_unused mxt_resume(struct device *dev) if (!input_dev) return 0; + enable_irq(data->irq); + mutex_lock(&input_dev->mutex); if (input_dev->users) diff --git a/drivers/input/touchscreen/colibri-vf50-ts.c b/drivers/input/touchscreen/colibri-vf50-ts.c index 0e40897949bb..aa829725ded7 100644 --- a/drivers/input/touchscreen/colibri-vf50-ts.c +++ b/drivers/input/touchscreen/colibri-vf50-ts.c @@ -9,7 +9,6 @@ #include <linux/delay.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/iio/consumer.h> #include <linux/iio/types.h> diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c index 4b22d49a0f49..6bcffc930384 100644 --- a/drivers/input/touchscreen/cyttsp4_core.c +++ b/drivers/input/touchscreen/cyttsp4_core.c @@ -1990,11 +1990,6 @@ static int cyttsp4_mt_probe(struct cyttsp4 *cd) /* get sysinfo */ md->si = &cd->sysinfo; - if (!md->si) { - dev_err(dev, "%s: Fail get sysinfo pointer from core p=%p\n", - __func__, md->si); - goto error_get_sysinfo; - } rc = cyttsp4_setup_input_device(cd); if (rc) @@ -2004,8 +1999,6 @@ static int cyttsp4_mt_probe(struct cyttsp4 *cd) error_init_input: input_free_device(md->input); -error_get_sysinfo: - input_set_drvdata(md->input, NULL); error_alloc_failed: dev_err(dev, "%s failed.\n", __func__); return rc; diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 5525f1fb1526..d61731c0037d 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -28,6 +28,7 @@ #include <linux/input/mt.h> #include <linux/input/touchscreen.h> #include <asm/unaligned.h> +#include <linux/regulator/consumer.h> #define WORK_REGISTER_THRESHOLD 0x00 #define WORK_REGISTER_REPORT_RATE 0x08 @@ -88,6 +89,7 @@ struct edt_ft5x06_ts_data { struct touchscreen_properties prop; u16 num_x; u16 num_y; + struct regulator *vcc; struct gpio_desc *reset_gpio; struct gpio_desc *wake_gpio; @@ -1036,6 +1038,13 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) } } +static void edt_ft5x06_disable_regulator(void *arg) +{ + struct edt_ft5x06_ts_data *data = arg; + + regulator_disable(data->vcc); +} + static int edt_ft5x06_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1064,6 +1073,27 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, tsdata->max_support_points = chip_data->max_support_points; + tsdata->vcc = devm_regulator_get(&client->dev, "vcc"); + if (IS_ERR(tsdata->vcc)) { + error = PTR_ERR(tsdata->vcc); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "failed to request regulator: %d\n", error); + return error; + } + + error = regulator_enable(tsdata->vcc); + if (error < 0) { + dev_err(&client->dev, "failed to enable vcc: %d\n", error); + return error; + } + + error = devm_add_action_or_reset(&client->dev, + edt_ft5x06_disable_regulator, + tsdata); + if (error) + return error; + tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(tsdata->reset_gpio)) { diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c index e9006407c9bc..4a17096e83e1 100644 --- a/drivers/input/touchscreen/ili210x.c +++ b/drivers/input/touchscreen/ili210x.c @@ -1,54 +1,54 @@ // SPDX-License-Identifier: GPL-2.0-only -#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/slab.h> #include <linux/input.h> #include <linux/input/mt.h> #include <linux/input/touchscreen.h> -#include <linux/delay.h> -#include <linux/workqueue.h> -#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> #include <linux/of_device.h> +#include <linux/sizes.h> +#include <linux/slab.h> #include <asm/unaligned.h> -#define ILI210X_TOUCHES 2 -#define ILI251X_TOUCHES 10 -#define DEFAULT_POLL_PERIOD 20 +#define ILI2XXX_POLL_PERIOD 20 + +#define ILI210X_DATA_SIZE 64 +#define ILI211X_DATA_SIZE 43 +#define ILI251X_DATA_SIZE1 31 +#define ILI251X_DATA_SIZE2 20 /* Touchscreen commands */ #define REG_TOUCHDATA 0x10 #define REG_PANEL_INFO 0x20 -#define REG_FIRMWARE_VERSION 0x40 #define REG_CALIBRATE 0xcc -struct firmware_version { - u8 id; - u8 major; - u8 minor; -} __packed; - -enum ili2xxx_model { - MODEL_ILI210X, - MODEL_ILI251X, +struct ili2xxx_chip { + int (*read_reg)(struct i2c_client *client, u8 reg, + void *buf, size_t len); + int (*get_touch_data)(struct i2c_client *client, u8 *data); + bool (*parse_touch_data)(const u8 *data, unsigned int finger, + unsigned int *x, unsigned int *y); + bool (*continue_polling)(const u8 *data, bool touch); + unsigned int max_touches; + unsigned int resolution; + bool has_calibrate_reg; }; struct ili210x { struct i2c_client *client; struct input_dev *input; - unsigned int poll_period; - struct delayed_work dwork; struct gpio_desc *reset_gpio; struct touchscreen_properties prop; - enum ili2xxx_model model; - unsigned int max_touches; + const struct ili2xxx_chip *chip; + bool stop; }; -static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, - size_t len) +static int ili210x_read_reg(struct i2c_client *client, + u8 reg, void *buf, size_t len) { - struct ili210x *priv = i2c_get_clientdata(client); - struct i2c_msg msg[2] = { + struct i2c_msg msg[] = { { .addr = client->addr, .flags = 0, @@ -62,151 +62,223 @@ static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, .buf = buf, } }; + int error, ret; - if (priv->model == MODEL_ILI251X) { - if (i2c_transfer(client->adapter, msg, 1) != 1) { - dev_err(&client->dev, "i2c transfer failed\n"); - return -EIO; - } - - usleep_range(5000, 5500); - - if (i2c_transfer(client->adapter, msg + 1, 1) != 1) { - dev_err(&client->dev, "i2c transfer failed\n"); - return -EIO; - } - } else { - if (i2c_transfer(client->adapter, msg, 2) != 2) { - dev_err(&client->dev, "i2c transfer failed\n"); - return -EIO; - } + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "%s failed: %d\n", __func__, error); + return error; } return 0; } -static int ili210x_read(struct i2c_client *client, void *buf, size_t len) +static int ili210x_read_touch_data(struct i2c_client *client, u8 *data) { - struct i2c_msg msg = { - .addr = client->addr, - .flags = I2C_M_RD, - .len = len, - .buf = buf, - }; + return ili210x_read_reg(client, REG_TOUCHDATA, + data, ILI210X_DATA_SIZE); +} + +static bool ili210x_touchdata_to_coords(const u8 *touchdata, + unsigned int finger, + unsigned int *x, unsigned int *y) +{ + if (touchdata[0] & BIT(finger)) + return false; + + *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); + *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); - if (i2c_transfer(client->adapter, &msg, 1) != 1) { - dev_err(&client->dev, "i2c transfer failed\n"); + return true; +} + +static bool ili210x_check_continue_polling(const u8 *data, bool touch) +{ + return data[0] & 0xf3; +} + +static const struct ili2xxx_chip ili210x_chip = { + .read_reg = ili210x_read_reg, + .get_touch_data = ili210x_read_touch_data, + .parse_touch_data = ili210x_touchdata_to_coords, + .continue_polling = ili210x_check_continue_polling, + .max_touches = 2, + .has_calibrate_reg = true, +}; + +static int ili211x_read_touch_data(struct i2c_client *client, u8 *data) +{ + s16 sum = 0; + int error; + int ret; + int i; + + ret = i2c_master_recv(client, data, ILI211X_DATA_SIZE); + if (ret != ILI211X_DATA_SIZE) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "%s failed: %d\n", __func__, error); + return error; + } + + /* This chip uses custom checksum at the end of data */ + for (i = 0; i < ILI211X_DATA_SIZE - 1; i++) + sum = (sum + data[i]) & 0xff; + + if ((-sum & 0xff) != data[ILI211X_DATA_SIZE - 1]) { + dev_err(&client->dev, + "CRC error (crc=0x%02x expected=0x%02x)\n", + sum, data[ILI211X_DATA_SIZE - 1]); return -EIO; } return 0; } -static bool ili210x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, +static bool ili211x_touchdata_to_coords(const u8 *touchdata, unsigned int finger, unsigned int *x, unsigned int *y) { - if (finger >= ILI210X_TOUCHES) - return false; + u32 data; - if (touchdata[0] & BIT(finger)) + data = get_unaligned_be32(touchdata + 1 + (finger * 4) + 0); + if (data == 0xffffffff) /* Finger up */ return false; - *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); - *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); + *x = ((touchdata[1 + (finger * 4) + 0] & 0xf0) << 4) | + touchdata[1 + (finger * 4) + 1]; + *y = ((touchdata[1 + (finger * 4) + 0] & 0x0f) << 8) | + touchdata[1 + (finger * 4) + 2]; return true; } -static bool ili251x_touchdata_to_coords(struct ili210x *priv, u8 *touchdata, +static bool ili211x_decline_polling(const u8 *data, bool touch) +{ + return false; +} + +static const struct ili2xxx_chip ili211x_chip = { + .read_reg = ili210x_read_reg, + .get_touch_data = ili211x_read_touch_data, + .parse_touch_data = ili211x_touchdata_to_coords, + .continue_polling = ili211x_decline_polling, + .max_touches = 10, + .resolution = 2048, +}; + +static int ili251x_read_reg(struct i2c_client *client, + u8 reg, void *buf, size_t len) +{ + int error; + int ret; + + ret = i2c_master_send(client, ®, 1); + if (ret == 1) { + usleep_range(5000, 5500); + + ret = i2c_master_recv(client, buf, len); + if (ret == len) + return 0; + } + + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "%s failed: %d\n", __func__, error); + return ret; +} + +static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) +{ + int error; + + error = ili251x_read_reg(client, REG_TOUCHDATA, + data, ILI251X_DATA_SIZE1); + if (!error && data[0] == 2) { + error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, + ILI251X_DATA_SIZE2); + if (error >= 0 && error != ILI251X_DATA_SIZE2) + error = -EIO; + } + + return error; +} + +static bool ili251x_touchdata_to_coords(const u8 *touchdata, unsigned int finger, unsigned int *x, unsigned int *y) { - if (finger >= ILI251X_TOUCHES) - return false; + u16 val; - *x = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); - if (!(*x & BIT(15))) /* Touch indication */ + val = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); + if (!(val & BIT(15))) /* Touch indication */ return false; - *x &= 0x3fff; + *x = val & 0x3fff; *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); return true; } +static bool ili251x_check_continue_polling(const u8 *data, bool touch) +{ + return touch; +} + +static const struct ili2xxx_chip ili251x_chip = { + .read_reg = ili251x_read_reg, + .get_touch_data = ili251x_read_touch_data, + .parse_touch_data = ili251x_touchdata_to_coords, + .continue_polling = ili251x_check_continue_polling, + .max_touches = 10, + .has_calibrate_reg = true, +}; + static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) { struct input_dev *input = priv->input; int i; - bool contact = false, touch = false; + bool contact = false, touch; unsigned int x = 0, y = 0; - for (i = 0; i < priv->max_touches; i++) { - if (priv->model == MODEL_ILI210X) { - touch = ili210x_touchdata_to_coords(priv, touchdata, - i, &x, &y); - } else if (priv->model == MODEL_ILI251X) { - touch = ili251x_touchdata_to_coords(priv, touchdata, - i, &x, &y); - if (touch) - contact = true; - } + for (i = 0; i < priv->chip->max_touches; i++) { + touch = priv->chip->parse_touch_data(touchdata, i, &x, &y); input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); - if (!touch) - continue; - touchscreen_report_pos(input, &priv->prop, x, y, - true); + if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) { + touchscreen_report_pos(input, &priv->prop, x, y, true); + contact = true; + } } input_mt_report_pointer_emulation(input, false); input_sync(input); - if (priv->model == MODEL_ILI210X) - contact = touchdata[0] & 0xf3; - return contact; } -static void ili210x_work(struct work_struct *work) +static irqreturn_t ili210x_irq(int irq, void *irq_data) { - struct ili210x *priv = container_of(work, struct ili210x, - dwork.work); + struct ili210x *priv = irq_data; struct i2c_client *client = priv->client; - u8 touchdata[64] = { 0 }; + const struct ili2xxx_chip *chip = priv->chip; + u8 touchdata[ILI210X_DATA_SIZE] = { 0 }; + bool keep_polling; bool touch; - int error = -EINVAL; - - if (priv->model == MODEL_ILI210X) { - error = ili210x_read_reg(client, REG_TOUCHDATA, - touchdata, sizeof(touchdata)); - } else if (priv->model == MODEL_ILI251X) { - error = ili210x_read_reg(client, REG_TOUCHDATA, - touchdata, 31); - if (!error && touchdata[0] == 2) - error = ili210x_read(client, &touchdata[31], 20); - } - - if (error) { - dev_err(&client->dev, - "Unable to get touchdata, err = %d\n", error); - return; - } - - touch = ili210x_report_events(priv, touchdata); - - if (touch) - schedule_delayed_work(&priv->dwork, - msecs_to_jiffies(priv->poll_period)); -} + int error; -static irqreturn_t ili210x_irq(int irq, void *irq_data) -{ - struct ili210x *priv = irq_data; + do { + error = chip->get_touch_data(client, touchdata); + if (error) { + dev_err(&client->dev, + "Unable to get touch data: %d\n", error); + break; + } - schedule_delayed_work(&priv->dwork, 0); + touch = ili210x_report_events(priv, touchdata); + keep_polling = chip->continue_polling(touchdata, touch); + if (keep_polling) + msleep(ILI2XXX_POLL_PERIOD); + } while (!priv->stop && keep_polling); return IRQ_HANDLED; } @@ -242,8 +314,19 @@ static struct attribute *ili210x_attributes[] = { NULL, }; +static umode_t ili210x_calibrate_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = kobj_to_dev(kobj); + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + + return priv->chip->has_calibrate_reg; +} + static const struct attribute_group ili210x_attr_group = { .attrs = ili210x_attributes, + .is_visible = ili210x_calibrate_visible, }; static void ili210x_power_down(void *data) @@ -253,28 +336,35 @@ static void ili210x_power_down(void *data) gpiod_set_value_cansleep(reset_gpio, 1); } -static void ili210x_cancel_work(void *data) +static void ili210x_stop(void *data) { struct ili210x *priv = data; - cancel_delayed_work_sync(&priv->dwork); + /* Tell ISR to quit even if there is a contact. */ + priv->stop = true; } static int ili210x_i2c_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct device *dev = &client->dev; + const struct ili2xxx_chip *chip; struct ili210x *priv; struct gpio_desc *reset_gpio; struct input_dev *input; - struct firmware_version firmware; - enum ili2xxx_model model; int error; - - model = (enum ili2xxx_model)id->driver_data; + unsigned int max_xy; dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + chip = device_get_match_data(dev); + if (!chip && id) + chip = (const struct ili2xxx_chip *)id->driver_data; + if (!chip) { + dev_err(&client->dev, "unknown device model\n"); + return -ENODEV; + } + if (client->irq <= 0) { dev_err(dev, "No IRQ!\n"); return -EINVAL; @@ -305,49 +395,39 @@ static int ili210x_i2c_probe(struct i2c_client *client, priv->client = client; priv->input = input; - priv->poll_period = DEFAULT_POLL_PERIOD; - INIT_DELAYED_WORK(&priv->dwork, ili210x_work); priv->reset_gpio = reset_gpio; - priv->model = model; - if (model == MODEL_ILI210X) - priv->max_touches = ILI210X_TOUCHES; - if (model == MODEL_ILI251X) - priv->max_touches = ILI251X_TOUCHES; - + priv->chip = chip; i2c_set_clientdata(client, priv); - /* Get firmware version */ - error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, - &firmware, sizeof(firmware)); - if (error) { - dev_err(dev, "Failed to get firmware version, err: %d\n", - error); - return error; - } - /* Setup input device */ input->name = "ILI210x Touchscreen"; input->id.bustype = BUS_I2C; - input->dev.parent = dev; /* Multi touch */ - input_set_abs_params(input, ABS_MT_POSITION_X, 0, 0xffff, 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, 0xffff, 0, 0); + max_xy = (chip->resolution ?: SZ_64K) - 1; + input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0); touchscreen_parse_properties(input, true, &priv->prop); - input_mt_init_slots(input, priv->max_touches, INPUT_MT_DIRECT); - error = devm_add_action(dev, ili210x_cancel_work, priv); - if (error) + error = input_mt_init_slots(input, priv->chip->max_touches, + INPUT_MT_DIRECT); + if (error) { + dev_err(dev, "Unable to set up slots, err: %d\n", error); return error; + } - error = devm_request_irq(dev, client->irq, ili210x_irq, 0, - client->name, priv); + error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq, + IRQF_ONESHOT, client->name, priv); if (error) { dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", error); return error; } + error = devm_add_action_or_reset(dev, ili210x_stop, priv); + if (error) + return error; + error = devm_device_add_group(dev, &ili210x_attr_group); if (error) { dev_err(dev, "Unable to create sysfs attributes, err: %d\n", @@ -361,56 +441,28 @@ static int ili210x_i2c_probe(struct i2c_client *client, return error; } - device_init_wakeup(dev, 1); - - dev_dbg(dev, - "ILI210x initialized (IRQ: %d), firmware version %d.%d.%d", - client->irq, firmware.id, firmware.major, firmware.minor); - return 0; } -static int __maybe_unused ili210x_i2c_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - - if (device_may_wakeup(&client->dev)) - enable_irq_wake(client->irq); - - return 0; -} - -static int __maybe_unused ili210x_i2c_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - - if (device_may_wakeup(&client->dev)) - disable_irq_wake(client->irq); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, - ili210x_i2c_suspend, ili210x_i2c_resume); - static const struct i2c_device_id ili210x_i2c_id[] = { - { "ili210x", MODEL_ILI210X }, - { "ili251x", MODEL_ILI251X }, + { "ili210x", (long)&ili210x_chip }, + { "ili2117", (long)&ili211x_chip }, + { "ili251x", (long)&ili251x_chip }, { } }; MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); static const struct of_device_id ili210x_dt_ids[] = { - { .compatible = "ilitek,ili210x", .data = (void *)MODEL_ILI210X }, - { .compatible = "ilitek,ili251x", .data = (void *)MODEL_ILI251X }, - { }, + { .compatible = "ilitek,ili210x", .data = &ili210x_chip }, + { .compatible = "ilitek,ili2117", .data = &ili211x_chip }, + { .compatible = "ilitek,ili251x", .data = &ili251x_chip }, + { } }; MODULE_DEVICE_TABLE(of, ili210x_dt_ids); static struct i2c_driver ili210x_ts_driver = { .driver = { .name = "ili210x_i2c", - .pm = &ili210x_i2c_pm, .of_match_table = ili210x_dt_ids, }, .id_table = ili210x_i2c_id, diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index a5ab774da4cc..69c6d559eeb0 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -446,8 +446,7 @@ static int mms114_probe(struct i2c_client *client, data->client = client; data->input_dev = input_dev; - /* FIXME: switch to device_get_match_data() when available */ - match_data = of_device_get_match_data(&client->dev); + match_data = device_get_match_data(&client->dev); if (!match_data) return -EINVAL; diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index e146dfa257b1..9aa098577350 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -5,22 +5,73 @@ * Copyright (C) 2010-2011 Pixcir, Inc. */ +#include <asm/unaligned.h> #include <linux/delay.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/slab.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/input/mt.h> #include <linux/input/touchscreen.h> -#include <linux/gpio.h> -#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> #include <linux/of_device.h> -#include <linux/platform_data/pixcir_i2c_ts.h> -#include <asm/unaligned.h> +#include <linux/module.h> +#include <linux/slab.h> #define PIXCIR_MAX_SLOTS 5 /* Max fingers supported by driver */ +/* + * Register map + */ +#define PIXCIR_REG_POWER_MODE 51 +#define PIXCIR_REG_INT_MODE 52 + +/* + * Power modes: + * active: max scan speed + * idle: lower scan speed with automatic transition to active on touch + * halt: datasheet says sleep but this is more like halt as the chip + * clocks are cut and it can only be brought out of this mode + * using the RESET pin. + */ +enum pixcir_power_mode { + PIXCIR_POWER_ACTIVE, + PIXCIR_POWER_IDLE, + PIXCIR_POWER_HALT, +}; + +#define PIXCIR_POWER_MODE_MASK 0x03 +#define PIXCIR_POWER_ALLOW_IDLE (1UL << 2) + +/* + * Interrupt modes: + * periodical: interrupt is asserted periodicaly + * diff coordinates: interrupt is asserted when coordinates change + * level on touch: interrupt level asserted during touch + * pulse on touch: interrupt pulse asserted during touch + * + */ +enum pixcir_int_mode { + PIXCIR_INT_PERIODICAL, + PIXCIR_INT_DIFF_COORD, + PIXCIR_INT_LEVEL_TOUCH, + PIXCIR_INT_PULSE_TOUCH, +}; + +#define PIXCIR_INT_MODE_MASK 0x03 +#define PIXCIR_INT_ENABLE (1UL << 3) +#define PIXCIR_INT_POL_HIGH (1UL << 2) + +/** + * struct pixcir_i2c_chip_data - chip related data + * @max_fingers: Max number of fingers reported simultaneously by h/w + * @has_hw_ids: Hardware supports finger tracking IDs + * + */ +struct pixcir_i2c_chip_data { + u8 max_fingers; + bool has_hw_ids; +}; + struct pixcir_i2c_ts_data { struct i2c_client *client; struct input_dev *input; @@ -30,7 +81,6 @@ struct pixcir_i2c_ts_data { struct gpio_desc *gpio_wake; const struct pixcir_i2c_chip_data *chip; struct touchscreen_properties prop; - int max_fingers; /* Max fingers supported in this instance */ bool running; }; @@ -54,7 +104,7 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, memset(report, 0, sizeof(struct pixcir_report_data)); i = chip->has_hw_ids ? 1 : 0; - readsize = 2 + tsdata->max_fingers * (4 + i); + readsize = 2 + tsdata->chip->max_fingers * (4 + i); if (readsize > sizeof(rdbuf)) readsize = sizeof(rdbuf); @@ -75,8 +125,8 @@ static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, } touch = rdbuf[0] & 0x7; - if (touch > tsdata->max_fingers) - touch = tsdata->max_fingers; + if (touch > tsdata->chip->max_fingers) + touch = tsdata->chip->max_fingers; report->num_touches = touch; bufptr = &rdbuf[2]; @@ -192,7 +242,7 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE); if (ret < 0) { - dev_err(dev, "%s: can't read reg 0x%x : %d\n", + dev_err(dev, "%s: can't read reg %d : %d\n", __func__, PIXCIR_REG_POWER_MODE, ret); return ret; } @@ -205,7 +255,7 @@ static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts, ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret); if (ret < 0) { - dev_err(dev, "%s: can't write reg 0x%x : %d\n", + dev_err(dev, "%s: can't write reg %d : %d\n", __func__, PIXCIR_REG_POWER_MODE, ret); return ret; } @@ -231,7 +281,7 @@ static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts, ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE); if (ret < 0) { - dev_err(dev, "%s: can't read reg 0x%x : %d\n", + dev_err(dev, "%s: can't read reg %d : %d\n", __func__, PIXCIR_REG_INT_MODE, ret); return ret; } @@ -246,7 +296,7 @@ static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts, ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret); if (ret < 0) { - dev_err(dev, "%s: can't write reg 0x%x : %d\n", + dev_err(dev, "%s: can't write reg %d : %d\n", __func__, PIXCIR_REG_INT_MODE, ret); return ret; } @@ -264,7 +314,7 @@ static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable) ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE); if (ret < 0) { - dev_err(dev, "%s: can't read reg 0x%x : %d\n", + dev_err(dev, "%s: can't read reg %d : %d\n", __func__, PIXCIR_REG_INT_MODE, ret); return ret; } @@ -276,7 +326,7 @@ static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable) ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret); if (ret < 0) { - dev_err(dev, "%s: can't write reg 0x%x : %d\n", + dev_err(dev, "%s: can't write reg %d : %d\n", __func__, PIXCIR_REG_INT_MODE, ret); return ret; } @@ -412,31 +462,9 @@ unlock: static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); -#ifdef CONFIG_OF -static const struct of_device_id pixcir_of_match[]; - -static int pixcir_parse_dt(struct device *dev, - struct pixcir_i2c_ts_data *tsdata) -{ - tsdata->chip = of_device_get_match_data(dev); - if (!tsdata->chip) - return -EINVAL; - - return 0; -} -#else -static int pixcir_parse_dt(struct device *dev, - struct pixcir_i2c_ts_data *tsdata) -{ - return -EINVAL; -} -#endif - static int pixcir_i2c_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { - const struct pixcir_ts_platform_data *pdata = - dev_get_platdata(&client->dev); struct device *dev = &client->dev; struct pixcir_i2c_ts_data *tsdata; struct input_dev *input; @@ -446,19 +474,11 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, if (!tsdata) return -ENOMEM; - if (pdata) { - tsdata->chip = &pdata->chip; - } else if (dev->of_node) { - error = pixcir_parse_dt(dev, tsdata); - if (error) - return error; - } else { - dev_err(dev, "platform data not defined\n"); - return -EINVAL; - } - - if (!tsdata->chip->max_fingers) { - dev_err(dev, "Invalid max_fingers in chip data\n"); + tsdata->chip = device_get_match_data(dev); + if (!tsdata->chip && id) + tsdata->chip = (const void *)id->driver_data; + if (!tsdata->chip) { + dev_err(dev, "can't locate chip data\n"); return -EINVAL; } @@ -475,30 +495,17 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, input->id.bustype = BUS_I2C; input->open = pixcir_input_open; input->close = pixcir_input_close; - input->dev.parent = dev; - - if (pdata) { - input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); - input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); - } else { - input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); - input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); - touchscreen_parse_properties(input, true, &tsdata->prop); - if (!input_abs_get_max(input, ABS_MT_POSITION_X) || - !input_abs_get_max(input, ABS_MT_POSITION_Y)) { - dev_err(dev, "Touchscreen size is not specified\n"); - return -EINVAL; - } - } - tsdata->max_fingers = tsdata->chip->max_fingers; - if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) { - tsdata->max_fingers = PIXCIR_MAX_SLOTS; - dev_info(dev, "Limiting maximum fingers to %d\n", - tsdata->max_fingers); + input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); + touchscreen_parse_properties(input, true, &tsdata->prop); + if (!input_abs_get_max(input, ABS_MT_POSITION_X) || + !input_abs_get_max(input, ABS_MT_POSITION_Y)) { + dev_err(dev, "Touchscreen size is not specified\n"); + return -EINVAL; } - error = input_mt_init_slots(input, tsdata->max_fingers, + error = input_mt_init_slots(input, tsdata->chip->max_fingers, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); if (error) { dev_err(dev, "Error initializing Multi-Touch slots\n"); @@ -510,7 +517,9 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, tsdata->gpio_attb = devm_gpiod_get(dev, "attb", GPIOD_IN); if (IS_ERR(tsdata->gpio_attb)) { error = PTR_ERR(tsdata->gpio_attb); - dev_err(dev, "Failed to request ATTB gpio: %d\n", error); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to request ATTB gpio: %d\n", + error); return error; } @@ -518,7 +527,9 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, GPIOD_OUT_LOW); if (IS_ERR(tsdata->gpio_reset)) { error = PTR_ERR(tsdata->gpio_reset); - dev_err(dev, "Failed to request RESET gpio: %d\n", error); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to request RESET gpio: %d\n", + error); return error; } @@ -574,14 +585,6 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, return 0; } -static const struct i2c_device_id pixcir_i2c_ts_id[] = { - { "pixcir_ts", 0 }, - { "pixcir_tangoc", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); - -#ifdef CONFIG_OF static const struct pixcir_i2c_chip_data pixcir_ts_data = { .max_fingers = 2, /* no hw id support */ @@ -592,6 +595,14 @@ static const struct pixcir_i2c_chip_data pixcir_tangoc_data = { .has_hw_ids = true, }; +static const struct i2c_device_id pixcir_i2c_ts_id[] = { + { "pixcir_ts", (unsigned long) &pixcir_ts_data }, + { "pixcir_tangoc", (unsigned long) &pixcir_tangoc_data }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); + +#ifdef CONFIG_OF static const struct of_device_id pixcir_of_match[] = { { .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data }, { .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data }, diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c index 69881265d121..0e2e08f3f433 100644 --- a/drivers/input/touchscreen/raspberrypi-ts.c +++ b/drivers/input/touchscreen/raspberrypi-ts.c @@ -16,7 +16,6 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/input/mt.h> -#include <linux/input-polldev.h> #include <linux/input/touchscreen.h> #include <soc/bcm2835/raspberrypi-firmware.h> @@ -34,7 +33,7 @@ struct rpi_ts { struct platform_device *pdev; - struct input_polled_dev *poll_dev; + struct input_dev *input; struct touchscreen_properties prop; void __iomem *fw_regs_va; @@ -57,10 +56,9 @@ struct rpi_ts_regs { } point[RPI_TS_MAX_SUPPORTED_POINTS]; }; -static void rpi_ts_poll(struct input_polled_dev *dev) +static void rpi_ts_poll(struct input_dev *input) { - struct input_dev *input = dev->input; - struct rpi_ts *ts = dev->private; + struct rpi_ts *ts = input_get_drvdata(input); struct rpi_ts_regs regs; int modified_ids = 0; long released_ids; @@ -123,10 +121,9 @@ static int rpi_ts_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; - struct input_polled_dev *poll_dev; + struct input_dev *input; struct device_node *fw_node; struct rpi_firmware *fw; - struct input_dev *input; struct rpi_ts *ts; u32 touchbuf; int error; @@ -160,7 +157,6 @@ static int rpi_ts_probe(struct platform_device *pdev) return error; } - touchbuf = (u32)ts->fw_regs_phys; error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, &touchbuf, sizeof(touchbuf)); @@ -170,19 +166,17 @@ static int rpi_ts_probe(struct platform_device *pdev) return error; } - poll_dev = devm_input_allocate_polled_device(dev); - if (!poll_dev) { + input = devm_input_allocate_device(dev); + if (!input) { dev_err(dev, "Failed to allocate input device\n"); return -ENOMEM; } - ts->poll_dev = poll_dev; - input = poll_dev->input; + + ts->input = input; + input_set_drvdata(input, ts); input->name = "raspberrypi-ts"; input->id.bustype = BUS_HOST; - poll_dev->poll_interval = RPI_TS_POLL_INTERVAL; - poll_dev->poll = rpi_ts_poll; - poll_dev->private = ts; input_set_abs_params(input, ABS_MT_POSITION_X, 0, RPI_TS_DEFAULT_WIDTH, 0, 0); @@ -197,7 +191,15 @@ static int rpi_ts_probe(struct platform_device *pdev) return error; } - error = input_register_polled_device(poll_dev); + error = input_setup_polling(input, rpi_ts_poll); + if (error) { + dev_err(dev, "could not set up polling mode, %d\n", error); + return error; + } + + input_set_poll_interval(input, RPI_TS_POLL_INTERVAL); + + error = input_register_device(input); if (error) { dev_err(dev, "could not register input device, %d\n", error); return error; @@ -214,10 +216,10 @@ MODULE_DEVICE_TABLE(of, rpi_ts_match); static struct platform_driver rpi_ts_driver = { .driver = { - .name = "raspberrypi-ts", + .name = "raspberrypi-ts", .of_match_table = rpi_ts_match, }, - .probe = rpi_ts_probe, + .probe = rpi_ts_probe, }; module_platform_driver(rpi_ts_driver); diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index b346e7cafd62..82920ff46f72 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -13,7 +13,6 @@ #include <linux/errno.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/gpio.h> #include <linux/input.h> #include <linux/delay.h> #include <linux/interrupt.h> diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c index 34923399ece4..63b29c7279e2 100644 --- a/drivers/input/touchscreen/st1232.c +++ b/drivers/input/touchscreen/st1232.c @@ -14,23 +14,19 @@ #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of.h> #include <linux/pm_qos.h> #include <linux/slab.h> #include <linux/types.h> -#include <linux/input/touchscreen.h> #define ST1232_TS_NAME "st1232-ts" #define ST1633_TS_NAME "st1633-ts" -struct st1232_ts_finger { - u16 x; - u16 y; - u8 t; - bool is_valid; -}; +#define ST_TS_MAX_FINGERS 10 struct st_chip_info { bool have_z; @@ -50,79 +46,89 @@ struct st1232_ts_data { const struct st_chip_info *chip_info; int read_buf_len; u8 *read_buf; - struct st1232_ts_finger *finger; }; static int st1232_ts_read_data(struct st1232_ts_data *ts) { - struct st1232_ts_finger *finger = ts->finger; struct i2c_client *client = ts->client; - struct i2c_msg msg[2]; - int error; - int i, y; u8 start_reg = ts->chip_info->start_reg; - u8 *buf = ts->read_buf; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .len = sizeof(start_reg), + .buf = &start_reg, + }, + { + .addr = client->addr, + .flags = I2C_M_RD | I2C_M_DMA_SAFE, + .len = ts->read_buf_len, + .buf = ts->read_buf, + } + }; + int ret; - /* read touchscreen data */ - msg[0].addr = client->addr; - msg[0].flags = 0; - msg[0].len = 1; - msg[0].buf = &start_reg; + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) + return ret < 0 ? ret : -EIO; - msg[1].addr = ts->client->addr; - msg[1].flags = I2C_M_RD; - msg[1].len = ts->read_buf_len; - msg[1].buf = buf; + return 0; +} - error = i2c_transfer(client->adapter, msg, 2); - if (error < 0) - return error; +static int st1232_ts_parse_and_report(struct st1232_ts_data *ts) +{ + struct input_dev *input = ts->input_dev; + struct input_mt_pos pos[ST_TS_MAX_FINGERS]; + u8 z[ST_TS_MAX_FINGERS]; + int slots[ST_TS_MAX_FINGERS]; + int n_contacts = 0; + int i; + + for (i = 0; i < ts->chip_info->max_fingers; i++) { + u8 *buf = &ts->read_buf[i * 4]; + + if (buf[0] & BIT(7)) { + unsigned int x = ((buf[0] & 0x70) << 4) | buf[1]; + unsigned int y = ((buf[0] & 0x07) << 8) | buf[2]; - for (i = 0, y = 0; i < ts->chip_info->max_fingers; i++, y += 3) { - finger[i].is_valid = buf[i + y] >> 7; - if (finger[i].is_valid) { - finger[i].x = ((buf[i + y] & 0x0070) << 4) | buf[i + 1]; - finger[i].y = ((buf[i + y] & 0x0007) << 8) | buf[i + 2]; + touchscreen_set_mt_pos(&pos[n_contacts], + &ts->prop, x, y); /* st1232 includes a z-axis / touch strength */ if (ts->chip_info->have_z) - finger[i].t = buf[i + 6]; + z[n_contacts] = ts->read_buf[i + 6]; + + n_contacts++; } } - return 0; + input_mt_assign_slots(input, slots, pos, n_contacts, 0); + for (i = 0; i < n_contacts; i++) { + input_mt_slot(input, slots[i]); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, pos[i].x); + input_report_abs(input, ABS_MT_POSITION_Y, pos[i].y); + if (ts->chip_info->have_z) + input_report_abs(input, ABS_MT_TOUCH_MAJOR, z[i]); + } + + input_mt_sync_frame(input); + input_sync(input); + + return n_contacts; } static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) { struct st1232_ts_data *ts = dev_id; - struct st1232_ts_finger *finger = ts->finger; - struct input_dev *input_dev = ts->input_dev; - int count = 0; - int i, ret; - - ret = st1232_ts_read_data(ts); - if (ret < 0) - goto end; - - /* multi touch protocol */ - for (i = 0; i < ts->chip_info->max_fingers; i++) { - if (!finger[i].is_valid) - continue; - - if (ts->chip_info->have_z) - input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, - finger[i].t); + int count; + int error; - touchscreen_report_pos(input_dev, &ts->prop, - finger[i].x, finger[i].y, true); - input_mt_sync(input_dev); - count++; - } + error = st1232_ts_read_data(ts); + if (error) + goto out; - /* SYN_MT_REPORT only if no contact */ + count = st1232_ts_parse_and_report(ts); if (!count) { - input_mt_sync(input_dev); if (ts->low_latency_req.dev) { dev_pm_qos_remove_request(&ts->low_latency_req); ts->low_latency_req.dev = NULL; @@ -134,10 +140,7 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) DEV_PM_QOS_RESUME_LATENCY, 100); } - /* SYN_REPORT */ - input_sync(input_dev); - -end: +out: return IRQ_HANDLED; } @@ -147,6 +150,11 @@ static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) gpiod_set_value_cansleep(ts->reset_gpio, !poweron); } +static void st1232_ts_power_off(void *data) +{ + st1232_ts_power(data, false); +} + static const struct st_chip_info st1232_chip_info = { .have_z = true, .max_x = 0x31f, /* 800 - 1 */ @@ -170,7 +178,6 @@ static int st1232_ts_probe(struct i2c_client *client, { const struct st_chip_info *match; struct st1232_ts_data *ts; - struct st1232_ts_finger *finger; struct input_dev *input_dev; int error; @@ -197,11 +204,6 @@ static int st1232_ts_probe(struct i2c_client *client, return -ENOMEM; ts->chip_info = match; - ts->finger = devm_kcalloc(&client->dev, - ts->chip_info->max_fingers, sizeof(*finger), - GFP_KERNEL); - if (!ts->finger) - return -ENOMEM; /* allocate a buffer according to the number of registers to read */ ts->read_buf_len = ts->chip_info->max_fingers * 4; @@ -227,14 +229,15 @@ static int st1232_ts_probe(struct i2c_client *client, st1232_ts_power(ts, true); + error = devm_add_action_or_reset(&client->dev, st1232_ts_power_off, ts); + if (error) { + dev_err(&client->dev, + "Failed to install power off action: %d\n", error); + return error; + } + input_dev->name = "st1232-touchscreen"; input_dev->id.bustype = BUS_I2C; - input_dev->dev.parent = &client->dev; - - __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); - __set_bit(EV_SYN, input_dev->evbit); - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(EV_ABS, input_dev->evbit); if (ts->chip_info->have_z) input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, @@ -247,6 +250,14 @@ static int st1232_ts_probe(struct i2c_client *client, touchscreen_parse_properties(input_dev, true, &ts->prop); + error = input_mt_init_slots(input_dev, ts->chip_info->max_fingers, + INPUT_MT_DIRECT | INPUT_MT_TRACK | + INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(&client->dev, "failed to initialize MT slots\n"); + return error; + } + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, st1232_ts_irq_handler, IRQF_ONESHOT, @@ -264,16 +275,6 @@ static int st1232_ts_probe(struct i2c_client *client, } i2c_set_clientdata(client, ts); - device_init_wakeup(&client->dev, 1); - - return 0; -} - -static int st1232_ts_remove(struct i2c_client *client) -{ - struct st1232_ts_data *ts = i2c_get_clientdata(client); - - st1232_ts_power(ts, false); return 0; } @@ -283,12 +284,10 @@ static int __maybe_unused st1232_ts_suspend(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct st1232_ts_data *ts = i2c_get_clientdata(client); - if (device_may_wakeup(&client->dev)) { - enable_irq_wake(client->irq); - } else { - disable_irq(client->irq); + disable_irq(client->irq); + + if (!device_may_wakeup(&client->dev)) st1232_ts_power(ts, false); - } return 0; } @@ -298,12 +297,10 @@ static int __maybe_unused st1232_ts_resume(struct device *dev) struct i2c_client *client = to_i2c_client(dev); struct st1232_ts_data *ts = i2c_get_clientdata(client); - if (device_may_wakeup(&client->dev)) { - disable_irq_wake(client->irq); - } else { + if (!device_may_wakeup(&client->dev)) st1232_ts_power(ts, true); - enable_irq(client->irq); - } + + enable_irq(client->irq); return 0; } @@ -327,7 +324,6 @@ MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids); static struct i2c_driver st1232_ts_driver = { .probe = st1232_ts_probe, - .remove = st1232_ts_remove, .id_table = st1232_ts_id, .driver = { .name = ST1232_TS_NAME, diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c index 3fd3e862269b..1dd47dda71cd 100644 --- a/drivers/input/touchscreen/sur40.c +++ b/drivers/input/touchscreen/sur40.c @@ -27,7 +27,7 @@ #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/printk.h> -#include <linux/input-polldev.h> +#include <linux/input.h> #include <linux/input/mt.h> #include <linux/usb/input.h> #include <linux/videodev2.h> @@ -206,7 +206,7 @@ struct sur40_state { struct usb_device *usbdev; struct device *dev; - struct input_polled_dev *input; + struct input_dev *input; struct v4l2_device v4l2; struct video_device vdev; @@ -370,6 +370,10 @@ static int sur40_init(struct sur40_state *dev) goto error; result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12); + if (result < 0) + goto error; + + result = 0; /* * Discard the result buffer - no known data inside except @@ -381,22 +385,22 @@ error: } /* - * Callback routines from input_polled_dev + * Callback routines from input_dev */ /* Enable the device, polling will now start. */ -static void sur40_open(struct input_polled_dev *polldev) +static int sur40_open(struct input_dev *input) { - struct sur40_state *sur40 = polldev->private; + struct sur40_state *sur40 = input_get_drvdata(input); dev_dbg(sur40->dev, "open\n"); - sur40_init(sur40); + return sur40_init(sur40); } /* Disable device, polling has stopped. */ -static void sur40_close(struct input_polled_dev *polldev) +static void sur40_close(struct input_dev *input) { - struct sur40_state *sur40 = polldev->private; + struct sur40_state *sur40 = input_get_drvdata(input); dev_dbg(sur40->dev, "close\n"); /* @@ -448,10 +452,9 @@ static void sur40_report_blob(struct sur40_blob *blob, struct input_dev *input) } /* core function: poll for new input data */ -static void sur40_poll(struct input_polled_dev *polldev) +static void sur40_poll(struct input_dev *input) { - struct sur40_state *sur40 = polldev->private; - struct input_dev *input = polldev->input; + struct sur40_state *sur40 = input_get_drvdata(input); int result, bulk_read, need_blobs, packet_blobs, i; u32 uninitialized_var(packet_id); @@ -613,10 +616,9 @@ err_poll: } /* Initialize input device parameters. */ -static void sur40_input_setup(struct input_dev *input_dev) +static int sur40_input_setup_events(struct input_dev *input_dev) { - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(EV_ABS, input_dev->evbit); + int error; input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, SENSOR_RES_X, 0, 0); @@ -637,8 +639,14 @@ static void sur40_input_setup(struct input_dev *input_dev) input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); - input_mt_init_slots(input_dev, MAX_CONTACTS, - INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + error = input_mt_init_slots(input_dev, MAX_CONTACTS, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(input_dev->dev.parent, "failed to set up slots\n"); + return error; + } + + return 0; } /* Check candidate USB interface. */ @@ -649,7 +657,7 @@ static int sur40_probe(struct usb_interface *interface, struct sur40_state *sur40; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; - struct input_polled_dev *poll_dev; + struct input_dev *input; int error; /* Check if we really have the right interface. */ @@ -670,8 +678,8 @@ static int sur40_probe(struct usb_interface *interface, if (!sur40) return -ENOMEM; - poll_dev = input_allocate_polled_device(); - if (!poll_dev) { + input = input_allocate_device(); + if (!input) { error = -ENOMEM; goto err_free_dev; } @@ -681,26 +689,33 @@ static int sur40_probe(struct usb_interface *interface, spin_lock_init(&sur40->qlock); mutex_init(&sur40->lock); - /* Set up polled input device control structure */ - poll_dev->private = sur40; - poll_dev->poll_interval = POLL_INTERVAL; - poll_dev->open = sur40_open; - poll_dev->poll = sur40_poll; - poll_dev->close = sur40_close; - /* Set up regular input device structure */ - sur40_input_setup(poll_dev->input); - - poll_dev->input->name = DRIVER_LONG; - usb_to_input_id(usbdev, &poll_dev->input->id); + input->name = DRIVER_LONG; + usb_to_input_id(usbdev, &input->id); usb_make_path(usbdev, sur40->phys, sizeof(sur40->phys)); strlcat(sur40->phys, "/input0", sizeof(sur40->phys)); - poll_dev->input->phys = sur40->phys; - poll_dev->input->dev.parent = &interface->dev; + input->phys = sur40->phys; + input->dev.parent = &interface->dev; + + input->open = sur40_open; + input->close = sur40_close; + + error = sur40_input_setup_events(input); + if (error) + goto err_free_input; + + input_set_drvdata(input, sur40); + error = input_setup_polling(input, sur40_poll); + if (error) { + dev_err(&interface->dev, "failed to set up polling"); + goto err_free_input; + } + + input_set_poll_interval(input, POLL_INTERVAL); sur40->usbdev = usbdev; sur40->dev = &interface->dev; - sur40->input = poll_dev; + sur40->input = input; /* use the bulk-in endpoint tested above */ sur40->bulk_in_size = usb_endpoint_maxp(endpoint); @@ -709,11 +724,11 @@ static int sur40_probe(struct usb_interface *interface, if (!sur40->bulk_in_buffer) { dev_err(&interface->dev, "Unable to allocate input buffer."); error = -ENOMEM; - goto err_free_polldev; + goto err_free_input; } /* register the polled input device */ - error = input_register_polled_device(poll_dev); + error = input_register_device(input); if (error) { dev_err(&interface->dev, "Unable to register polled input device."); @@ -796,8 +811,8 @@ err_unreg_v4l2: v4l2_device_unregister(&sur40->v4l2); err_free_buffer: kfree(sur40->bulk_in_buffer); -err_free_polldev: - input_free_polled_device(sur40->input); +err_free_input: + input_free_device(input); err_free_dev: kfree(sur40); @@ -813,8 +828,7 @@ static void sur40_disconnect(struct usb_interface *interface) video_unregister_device(&sur40->vdev); v4l2_device_unregister(&sur40->v4l2); - input_unregister_polled_device(sur40->input); - input_free_polled_device(sur40->input); + input_unregister_device(sur40->input); kfree(sur40->bulk_in_buffer); kfree(sur40); diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index 75170a7439b1..357a3108f2e5 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -17,7 +17,6 @@ #include <linux/workqueue.h> #include <linux/slab.h> #include <linux/input.h> -#include <linux/input-polldev.h> #include <linux/platform_device.h> #include <linux/mfd/tps6507x.h> #include <linux/input/tps6507x-ts.h> @@ -40,7 +39,7 @@ struct ts_event { struct tps6507x_ts { struct device *dev; - struct input_polled_dev *poll_dev; + struct input_dev *input; struct tps6507x_dev *mfd; char phys[32]; struct ts_event tc; @@ -148,10 +147,9 @@ static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc) return ret; } -static void tps6507x_ts_poll(struct input_polled_dev *poll_dev) +static void tps6507x_ts_poll(struct input_dev *input_dev) { - struct tps6507x_ts *tsc = poll_dev->private; - struct input_dev *input_dev = poll_dev->input; + struct tps6507x_ts *tsc = input_get_drvdata(input_dev); bool pendown; s32 ret; @@ -205,7 +203,6 @@ static int tps6507x_ts_probe(struct platform_device *pdev) const struct tps6507x_board *tps_board; const struct touchscreen_init_data *init_data; struct tps6507x_ts *tsc; - struct input_polled_dev *poll_dev; struct input_dev *input_dev; int error; @@ -240,23 +237,16 @@ static int tps6507x_ts_probe(struct platform_device *pdev) snprintf(tsc->phys, sizeof(tsc->phys), "%s/input0", dev_name(tsc->dev)); - poll_dev = devm_input_allocate_polled_device(&pdev->dev); - if (!poll_dev) { + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { dev_err(tsc->dev, "Failed to allocate polled input device.\n"); return -ENOMEM; } - tsc->poll_dev = poll_dev; - - poll_dev->private = tsc; - poll_dev->poll = tps6507x_ts_poll; - poll_dev->poll_interval = init_data ? - init_data->poll_period : TSC_DEFAULT_POLL_PERIOD; - - input_dev = poll_dev->input; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + tsc->input = input_dev; + input_set_drvdata(input_dev, tsc); + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0); @@ -275,7 +265,15 @@ static int tps6507x_ts_probe(struct platform_device *pdev) if (error) return error; - error = input_register_polled_device(poll_dev); + error = input_setup_polling(input_dev, tps6507x_ts_poll); + if (error) + return error; + + input_set_poll_interval(input_dev, + init_data ? init_data->poll_period : + TSC_DEFAULT_POLL_PERIOD); + + error = input_register_device(input_dev); if (error) return error; diff --git a/drivers/input/touchscreen/ts4800-ts.c b/drivers/input/touchscreen/ts4800-ts.c index 5b4f5362c67b..6cf66aadc10e 100644 --- a/drivers/input/touchscreen/ts4800-ts.c +++ b/drivers/input/touchscreen/ts4800-ts.c @@ -10,7 +10,6 @@ #include <linux/bitops.h> #include <linux/input.h> -#include <linux/input-polldev.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/mfd/syscon.h> @@ -33,7 +32,7 @@ #define Y_OFFSET 0x2 struct ts4800_ts { - struct input_polled_dev *poll_dev; + struct input_dev *input; struct device *dev; char phys[32]; @@ -46,22 +45,26 @@ struct ts4800_ts { int debounce; }; -static void ts4800_ts_open(struct input_polled_dev *dev) +static int ts4800_ts_open(struct input_dev *input_dev) { - struct ts4800_ts *ts = dev->private; - int ret; + struct ts4800_ts *ts = input_get_drvdata(input_dev); + int error; ts->pendown = false; ts->debounce = DEBOUNCE_COUNT; - ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, ts->bit); - if (ret) - dev_warn(ts->dev, "Failed to enable touchscreen\n"); + error = regmap_update_bits(ts->regmap, ts->reg, ts->bit, ts->bit); + if (error) { + dev_warn(ts->dev, "Failed to enable touchscreen: %d\n", error); + return error; + } + + return 0; } -static void ts4800_ts_close(struct input_polled_dev *dev) +static void ts4800_ts_close(struct input_dev *input_dev) { - struct ts4800_ts *ts = dev->private; + struct ts4800_ts *ts = input_get_drvdata(input_dev); int ret; ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, 0); @@ -70,10 +73,9 @@ static void ts4800_ts_close(struct input_polled_dev *dev) } -static void ts4800_ts_poll(struct input_polled_dev *dev) +static void ts4800_ts_poll(struct input_dev *input_dev) { - struct input_dev *input_dev = dev->input; - struct ts4800_ts *ts = dev->private; + struct ts4800_ts *ts = input_get_drvdata(input_dev); u16 last_x = readw(ts->base + X_OFFSET); u16 last_y = readw(ts->base + Y_OFFSET); bool pendown = last_x & PENDOWN_MASK; @@ -146,7 +148,7 @@ static int ts4800_parse_dt(struct platform_device *pdev, static int ts4800_ts_probe(struct platform_device *pdev) { - struct input_polled_dev *poll_dev; + struct input_dev *input_dev; struct ts4800_ts *ts; int error; @@ -162,32 +164,38 @@ static int ts4800_ts_probe(struct platform_device *pdev) if (IS_ERR(ts->base)) return PTR_ERR(ts->base); - poll_dev = devm_input_allocate_polled_device(&pdev->dev); - if (!poll_dev) + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) return -ENOMEM; snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&pdev->dev)); - ts->poll_dev = poll_dev; + ts->input = input_dev; ts->dev = &pdev->dev; - poll_dev->private = ts; - poll_dev->poll_interval = POLL_INTERVAL; - poll_dev->open = ts4800_ts_open; - poll_dev->close = ts4800_ts_close; - poll_dev->poll = ts4800_ts_poll; + input_set_drvdata(input_dev, ts); + + input_dev->name = "TS-4800 Touchscreen"; + input_dev->phys = ts->phys; + + input_dev->open = ts4800_ts_open; + input_dev->close = ts4800_ts_close; + + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); - poll_dev->input->name = "TS-4800 Touchscreen"; - poll_dev->input->phys = ts->phys; + error = input_setup_polling(input_dev, ts4800_ts_poll); + if (error) { + dev_err(&pdev->dev, "Unable to set up polling: %d\n", error); + return error; + } - input_set_capability(poll_dev->input, EV_KEY, BTN_TOUCH); - input_set_abs_params(poll_dev->input, ABS_X, 0, MAX_12BIT, 0, 0); - input_set_abs_params(poll_dev->input, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_poll_interval(input_dev, POLL_INTERVAL); - error = input_register_polled_device(poll_dev); + error = input_register_device(input_dev); if (error) { dev_err(&pdev->dev, - "Unabled to register polled input device (%d)\n", - error); + "Unable to register input device: %d\n", error); return error; } diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c index f017af8c2aa3..1afc6bde2891 100644 --- a/drivers/input/touchscreen/wacom_i2c.c +++ b/drivers/input/touchscreen/wacom_i2c.c @@ -12,7 +12,6 @@ #include <linux/slab.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/gpio.h> #include <asm/unaligned.h> #define WACOM_CMD_QUERY0 0x04 |