aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/input-mt.c2
-rw-r--r--drivers/input/joystick/analog.c2
-rw-r--r--drivers/input/keyboard/Kconfig3
-rw-r--r--drivers/input/keyboard/tca8418_keypad.c2
-rw-r--r--drivers/input/misc/Kconfig10
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/arizona-haptics.c255
-rw-r--r--drivers/input/misc/da9052_onkey.c22
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h9
-rw-r--r--drivers/input/touchscreen/Kconfig6
-rw-r--r--drivers/input/touchscreen/Makefile2
-rw-r--r--drivers/input/touchscreen/atmel_tsadcc.c2
-rw-r--r--drivers/input/touchscreen/da9052_tsi.c59
-rw-r--r--drivers/input/touchscreen/ti_am335x_tsc.c398
-rw-r--r--drivers/input/touchscreen/ti_tscadc.c486
15 files changed, 708 insertions, 551 deletions
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index 53eaf89f2db5..71db1930573f 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -252,7 +252,7 @@ void input_mt_sync_frame(struct input_dev *dev)
if (mt->flags & INPUT_MT_DROP_UNUSED) {
for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
- if (s->frame == mt->frame)
+ if (input_mt_is_used(mt, s))
continue;
input_mt_slot(dev, s - mt->slots);
input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 358cd7ee905b..7cd74e29cbc8 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -162,7 +162,7 @@ static unsigned int get_time_pit(void)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "PCC"
-#elif defined(CONFIG_MN10300)
+#elif defined(CONFIG_MN10300) || defined(CONFIG_TILE)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x, y) ((x) - (y))
#define TIME_NAME "TSC"
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 992137cf3a64..ac0500667000 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -409,7 +409,7 @@ config KEYBOARD_NEWTON
config KEYBOARD_NOMADIK
tristate "ST-Ericsson Nomadik SKE keyboard"
- depends on PLAT_NOMADIK
+ depends on (ARCH_NOMADIK || ARCH_U8500)
select INPUT_MATRIXKMAP
help
Say Y here if you want to use a keypad provided on the SKE controller
@@ -554,6 +554,7 @@ config KEYBOARD_OMAP
config KEYBOARD_OMAP4
tristate "TI OMAP4+ keypad support"
+ depends on ARCH_OMAP2PLUS
select INPUT_MATRIXKMAP
help
Say Y here if you want to use the OMAP4+ keypad.
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 50e9c5e195e1..a34cc6714e5b 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -384,7 +384,7 @@ static const struct i2c_device_id tca8418_id[] = {
MODULE_DEVICE_TABLE(i2c, tca8418_id);
#ifdef CONFIG_OF
-static const struct of_device_id tca8418_dt_ids[] __devinitconst = {
+static const struct of_device_id tca8418_dt_ids[] = {
{ .compatible = "ti,tca8418", },
{ }
};
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 2a1647ef5610..259ef31abb18 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -72,6 +72,16 @@ config INPUT_AD714X_SPI
To compile this driver as a module, choose M here: the
module will be called ad714x-spi.
+config INPUT_ARIZONA_HAPTICS
+ tristate "Arizona haptics support"
+ depends on MFD_ARIZONA && SND_SOC
+ select INPUT_FF_MEMLESS
+ help
+ Say Y to enable support for the haptics module in Arizona CODECs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called arizona-haptics.
+
config INPUT_BMA150
tristate "BMA150/SMB380 acceleration sensor support"
depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1f874afeea6a..1f1e1b109d9d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_INPUT_ADXL34X) += adxl34x.o
obj-$(CONFIG_INPUT_ADXL34X_I2C) += adxl34x-i2c.o
obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
+obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o
diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c
new file mode 100644
index 000000000000..7a04f54ef961
--- /dev/null
+++ b/drivers/input/misc/arizona-haptics.c
@@ -0,0 +1,255 @@
+/*
+ * Arizona haptics driver
+ *
+ * Copyright 2012 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+struct arizona_haptics {
+ struct arizona *arizona;
+ struct input_dev *input_dev;
+ struct work_struct work;
+
+ struct mutex mutex;
+ u8 intensity;
+};
+
+static void arizona_haptics_work(struct work_struct *work)
+{
+ struct arizona_haptics *haptics = container_of(work,
+ struct arizona_haptics,
+ work);
+ struct arizona *arizona = haptics->arizona;
+ struct mutex *dapm_mutex = &arizona->dapm->card->dapm_mutex;
+ int ret;
+
+ if (!haptics->arizona->dapm) {
+ dev_err(arizona->dev, "No DAPM context\n");
+ return;
+ }
+
+ if (haptics->intensity) {
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_HAPTICS_PHASE_2_INTENSITY,
+ ARIZONA_PHASE2_INTENSITY_MASK,
+ haptics->intensity);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to set intensity: %d\n",
+ ret);
+ return;
+ }
+
+ /* This enable sequence will be a noop if already enabled */
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_HAPTICS_CONTROL_1,
+ ARIZONA_HAP_CTRL_MASK,
+ 1 << ARIZONA_HAP_CTRL_SHIFT);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to start haptics: %d\n",
+ ret);
+ return;
+ }
+
+ mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+
+ ret = snd_soc_dapm_enable_pin(arizona->dapm, "HAPTICS");
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to start HAPTICS: %d\n",
+ ret);
+ mutex_unlock(dapm_mutex);
+ return;
+ }
+
+ ret = snd_soc_dapm_sync(arizona->dapm);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to sync DAPM: %d\n",
+ ret);
+ mutex_unlock(dapm_mutex);
+ return;
+ }
+
+ mutex_unlock(dapm_mutex);
+
+ } else {
+ /* This disable sequence will be a noop if already enabled */
+ mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+
+ ret = snd_soc_dapm_disable_pin(arizona->dapm, "HAPTICS");
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to disable HAPTICS: %d\n",
+ ret);
+ mutex_unlock(dapm_mutex);
+ return;
+ }
+
+ ret = snd_soc_dapm_sync(arizona->dapm);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to sync DAPM: %d\n",
+ ret);
+ mutex_unlock(dapm_mutex);
+ return;
+ }
+
+ mutex_unlock(dapm_mutex);
+
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_HAPTICS_CONTROL_1,
+ ARIZONA_HAP_CTRL_MASK,
+ 1 << ARIZONA_HAP_CTRL_SHIFT);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to stop haptics: %d\n",
+ ret);
+ return;
+ }
+ }
+}
+
+static int arizona_haptics_play(struct input_dev *input, void *data,
+ struct ff_effect *effect)
+{
+ struct arizona_haptics *haptics = input_get_drvdata(input);
+ struct arizona *arizona = haptics->arizona;
+
+ if (!arizona->dapm) {
+ dev_err(arizona->dev, "No DAPM context\n");
+ return -EBUSY;
+ }
+
+ if (effect->u.rumble.strong_magnitude) {
+ /* Scale the magnitude into the range the device supports */
+ if (arizona->pdata.hap_act) {
+ haptics->intensity =
+ effect->u.rumble.strong_magnitude >> 9;
+ if (effect->direction < 0x8000)
+ haptics->intensity += 0x7f;
+ } else {
+ haptics->intensity =
+ effect->u.rumble.strong_magnitude >> 8;
+ }
+ } else {
+ haptics->intensity = 0;
+ }
+
+ schedule_work(&haptics->work);
+
+ return 0;
+}
+
+static void arizona_haptics_close(struct input_dev *input)
+{
+ struct arizona_haptics *haptics = input_get_drvdata(input);
+ struct mutex *dapm_mutex = &haptics->arizona->dapm->card->dapm_mutex;
+
+ cancel_work_sync(&haptics->work);
+
+ mutex_lock_nested(dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+
+ if (haptics->arizona->dapm)
+ snd_soc_dapm_disable_pin(haptics->arizona->dapm, "HAPTICS");
+
+ mutex_unlock(dapm_mutex);
+}
+
+static int arizona_haptics_probe(struct platform_device *pdev)
+{
+ struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ struct arizona_haptics *haptics;
+ int ret;
+
+ haptics = devm_kzalloc(&pdev->dev, sizeof(*haptics), GFP_KERNEL);
+ if (!haptics)
+ return -ENOMEM;
+
+ haptics->arizona = arizona;
+
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HAPTICS_CONTROL_1,
+ ARIZONA_HAP_ACT, arizona->pdata.hap_act);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to set haptics actuator: %d\n",
+ ret);
+ return ret;
+ }
+
+ INIT_WORK(&haptics->work, arizona_haptics_work);
+
+ haptics->input_dev = input_allocate_device();
+ if (haptics->input_dev == NULL) {
+ dev_err(arizona->dev, "Failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ input_set_drvdata(haptics->input_dev, haptics);
+
+ haptics->input_dev->name = "arizona:haptics";
+ haptics->input_dev->dev.parent = pdev->dev.parent;
+ haptics->input_dev->close = arizona_haptics_close;
+ __set_bit(FF_RUMBLE, haptics->input_dev->ffbit);
+
+ ret = input_ff_create_memless(haptics->input_dev, NULL,
+ arizona_haptics_play);
+ if (ret < 0) {
+ dev_err(arizona->dev, "input_ff_create_memless() failed: %d\n",
+ ret);
+ goto err_ialloc;
+ }
+
+ ret = input_register_device(haptics->input_dev);
+ if (ret < 0) {
+ dev_err(arizona->dev, "couldn't register input device: %d\n",
+ ret);
+ goto err_iff;
+ }
+
+ platform_set_drvdata(pdev, haptics);
+
+ return 0;
+
+err_iff:
+ if (haptics->input_dev)
+ input_ff_destroy(haptics->input_dev);
+err_ialloc:
+ input_free_device(haptics->input_dev);
+
+ return ret;
+}
+
+static int arizona_haptics_remove(struct platform_device *pdev)
+{
+ struct arizona_haptics *haptics = platform_get_drvdata(pdev);
+
+ input_unregister_device(haptics->input_dev);
+
+ return 0;
+}
+
+static struct platform_driver arizona_haptics_driver = {
+ .probe = arizona_haptics_probe,
+ .remove = arizona_haptics_remove,
+ .driver = {
+ .name = "arizona-haptics",
+ .owner = THIS_MODULE,
+ },
+};
+module_platform_driver(arizona_haptics_driver);
+
+MODULE_ALIAS("platform:arizona-haptics");
+MODULE_DESCRIPTION("Arizona haptics driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c
index 630c1ce4980a..020569a499f2 100644
--- a/drivers/input/misc/da9052_onkey.c
+++ b/drivers/input/misc/da9052_onkey.c
@@ -24,7 +24,6 @@ struct da9052_onkey {
struct da9052 *da9052;
struct input_dev *input;
struct delayed_work work;
- unsigned int irq;
};
static void da9052_onkey_query(struct da9052_onkey *onkey)
@@ -76,7 +75,6 @@ static int da9052_onkey_probe(struct platform_device *pdev)
struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent);
struct da9052_onkey *onkey;
struct input_dev *input_dev;
- int irq;
int error;
if (!da9052) {
@@ -84,13 +82,6 @@ static int da9052_onkey_probe(struct platform_device *pdev)
return -EINVAL;
}
- irq = platform_get_irq_byname(pdev, "ONKEY");
- if (irq < 0) {
- dev_err(&pdev->dev,
- "Failed to get an IRQ for input device, %d\n", irq);
- return -EINVAL;
- }
-
onkey = kzalloc(sizeof(*onkey), GFP_KERNEL);
input_dev = input_allocate_device();
if (!onkey || !input_dev) {
@@ -101,7 +92,6 @@ static int da9052_onkey_probe(struct platform_device *pdev)
onkey->input = input_dev;
onkey->da9052 = da9052;
- onkey->irq = irq;
INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work);
input_dev->name = "da9052-onkey";
@@ -111,13 +101,11 @@ static int da9052_onkey_probe(struct platform_device *pdev)
input_dev->evbit[0] = BIT_MASK(EV_KEY);
__set_bit(KEY_POWER, input_dev->keybit);
- error = request_threaded_irq(onkey->irq, NULL, da9052_onkey_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "ONKEY", onkey);
+ error = da9052_request_irq(onkey->da9052, DA9052_IRQ_NONKEY, "ONKEY",
+ da9052_onkey_irq, onkey);
if (error < 0) {
dev_err(onkey->da9052->dev,
- "Failed to register ONKEY IRQ %d, error = %d\n",
- onkey->irq, error);
+ "Failed to register ONKEY IRQ: %d\n", error);
goto err_free_mem;
}
@@ -132,7 +120,7 @@ static int da9052_onkey_probe(struct platform_device *pdev)
return 0;
err_free_irq:
- free_irq(onkey->irq, onkey);
+ da9052_free_irq(onkey->da9052, DA9052_IRQ_NONKEY, onkey);
cancel_delayed_work_sync(&onkey->work);
err_free_mem:
input_free_device(input_dev);
@@ -145,7 +133,7 @@ static int da9052_onkey_remove(struct platform_device *pdev)
{
struct da9052_onkey *onkey = platform_get_drvdata(pdev);
- free_irq(onkey->irq, onkey);
+ da9052_free_irq(onkey->da9052, DA9052_IRQ_NONKEY, onkey);
cancel_delayed_work_sync(&onkey->work);
input_unregister_device(onkey->input);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index d6cc77a53c7e..5f306f79da0c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -921,6 +921,7 @@ static int __init i8042_platform_init(void)
int retval;
#ifdef CONFIG_X86
+ u8 a20_on = 0xdf;
/* Just return if pre-detection shows no i8042 controller exist */
if (!x86_platform.i8042_detect())
return -ENODEV;
@@ -960,6 +961,14 @@ static int __init i8042_platform_init(void)
if (dmi_check_system(i8042_dmi_dritek_table))
i8042_dritek = true;
+
+ /*
+ * A20 was already enabled during early kernel init. But some buggy
+ * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
+ * resume from S3. So we do it here and hope that nothing breaks.
+ */
+ i8042_command(&a20_on, 0x10d1);
+ i8042_command(NULL, 0x00ff); /* Null command for SMM firmware */
#endif /* CONFIG_X86 */
return retval;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 9a647ee1136a..f9a5fd89bc02 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -517,9 +517,9 @@ config TOUCHSCREEN_TOUCHWIN
To compile this driver as a module, choose M here: the
module will be called touchwin.
-config TOUCHSCREEN_TI_TSCADC
+config TOUCHSCREEN_TI_AM335X_TSC
tristate "TI Touchscreen Interface"
- depends on ARCH_OMAP2PLUS
+ depends on MFD_TI_AM335X_TSCADC
help
Say Y here if you have 4/5/8 wire touchscreen controller
to be connected to the ADC controller on your TI AM335x SoC.
@@ -527,7 +527,7 @@ config TOUCHSCREEN_TI_TSCADC
If unsure, say N.
To compile this driver as a module, choose M here: the
- module will be called ti_tscadc.
+ module will be called ti_am335x_tsc.
config TOUCHSCREEN_ATMEL_TSADCC
tristate "Atmel Touchscreen Interface"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 5f949c0bf82f..6bfbeab67c9f 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
-obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC) += ti_tscadc.o
+obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 55092d1c5cb9..95f6785a94b0 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,7 +22,7 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/board.h>
+#include <linux/platform_data/atmel.h>
#include <mach/cpu.h>
/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
index 303966ffe1e8..8f561e22bdd4 100644
--- a/drivers/input/touchscreen/da9052_tsi.c
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -27,8 +27,6 @@ struct da9052_tsi {
struct input_dev *dev;
struct delayed_work ts_pen_work;
struct mutex mutex;
- unsigned int irq_pendwn;
- unsigned int irq_datardy;
bool stopped;
bool adc_on;
};
@@ -45,8 +43,8 @@ static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
if (!tsi->stopped) {
/* Mask PEN_DOWN event and unmask TSI_READY event */
- disable_irq_nosync(tsi->irq_pendwn);
- enable_irq(tsi->irq_datardy);
+ da9052_disable_irq_nosync(tsi->da9052, DA9052_IRQ_PENDOWN);
+ da9052_enable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
da9052_ts_adc_toggle(tsi, true);
@@ -137,8 +135,8 @@ static void da9052_ts_pen_work(struct work_struct *work)
return;
/* Mask TSI_READY event and unmask PEN_DOWN event */
- disable_irq(tsi->irq_datardy);
- enable_irq(tsi->irq_pendwn);
+ da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
+ da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
}
}
}
@@ -197,7 +195,7 @@ static int da9052_ts_input_open(struct input_dev *input_dev)
mb();
/* Unmask PEN_DOWN event */
- enable_irq(tsi->irq_pendwn);
+ da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
/* Enable Pen Detect Circuit */
return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
@@ -210,11 +208,11 @@ static void da9052_ts_input_close(struct input_dev *input_dev)
tsi->stopped = true;
mb();
- disable_irq(tsi->irq_pendwn);
+ da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
cancel_delayed_work_sync(&tsi->ts_pen_work);
if (tsi->adc_on) {
- disable_irq(tsi->irq_datardy);
+ da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
da9052_ts_adc_toggle(tsi, false);
/*
@@ -222,7 +220,7 @@ static void da9052_ts_input_close(struct input_dev *input_dev)
* twice and we need to enable it to keep enable/disable
* counter balanced. IRQ is still off though.
*/
- enable_irq(tsi->irq_pendwn);
+ da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
}
/* Disable Pen Detect Circuit */
@@ -234,21 +232,12 @@ static int da9052_ts_probe(struct platform_device *pdev)
struct da9052 *da9052;
struct da9052_tsi *tsi;
struct input_dev *input_dev;
- int irq_pendwn;
- int irq_datardy;
int error;
da9052 = dev_get_drvdata(pdev->dev.parent);
if (!da9052)
return -EINVAL;
- irq_pendwn = platform_get_irq_byname(pdev, "PENDWN");
- irq_datardy = platform_get_irq_byname(pdev, "TSIRDY");
- if (irq_pendwn < 0 || irq_datardy < 0) {
- dev_err(da9052->dev, "Unable to determine device interrupts\n");
- return -ENXIO;
- }
-
tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
input_dev = input_allocate_device();
if (!tsi || !input_dev) {
@@ -258,8 +247,6 @@ static int da9052_ts_probe(struct platform_device *pdev)
tsi->da9052 = da9052;
tsi->dev = input_dev;
- tsi->irq_pendwn = da9052->irq_base + irq_pendwn;
- tsi->irq_datardy = da9052->irq_base + irq_datardy;
tsi->stopped = true;
INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
@@ -287,31 +274,25 @@ static int da9052_ts_probe(struct platform_device *pdev)
/* Disable ADC */
da9052_ts_adc_toggle(tsi, false);
- error = request_threaded_irq(tsi->irq_pendwn,
- NULL, da9052_ts_pendwn_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "PENDWN", tsi);
+ error = da9052_request_irq(tsi->da9052, DA9052_IRQ_PENDOWN,
+ "pendown-irq", da9052_ts_pendwn_irq, tsi);
if (error) {
dev_err(tsi->da9052->dev,
- "Failed to register PENDWN IRQ %d, error = %d\n",
- tsi->irq_pendwn, error);
+ "Failed to register PENDWN IRQ: %d\n", error);
goto err_free_mem;
}
- error = request_threaded_irq(tsi->irq_datardy,
- NULL, da9052_ts_datardy_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "TSIRDY", tsi);
+ error = da9052_request_irq(tsi->da9052, DA9052_IRQ_TSIREADY,
+ "tsiready-irq", da9052_ts_datardy_irq, tsi);
if (error) {
dev_err(tsi->da9052->dev,
- "Failed to register TSIRDY IRQ %d, error = %d\n",
- tsi->irq_datardy, error);
+ "Failed to register TSIRDY IRQ :%d\n", error);
goto err_free_pendwn_irq;
}
/* Mask PEN_DOWN and TSI_READY events */
- disable_irq(tsi->irq_pendwn);
- disable_irq(tsi->irq_datardy);
+ da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+ da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
error = da9052_configure_tsi(tsi);
if (error)
@@ -326,9 +307,9 @@ static int da9052_ts_probe(struct platform_device *pdev)
return 0;
err_free_datardy_irq:
- free_irq(tsi->irq_datardy, tsi);
+ da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
err_free_pendwn_irq:
- free_irq(tsi->irq_pendwn, tsi);
+ da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
err_free_mem:
kfree(tsi);
input_free_device(input_dev);
@@ -342,8 +323,8 @@ static int da9052_ts_remove(struct platform_device *pdev)
da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
- free_irq(tsi->irq_pendwn, tsi);
- free_irq(tsi->irq_datardy, tsi);
+ da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
+ da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
input_unregister_device(tsi->dev);
kfree(tsi);
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
new file mode 100644
index 000000000000..51e7b87827a4
--- /dev/null
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -0,0 +1,398 @@
+/*
+ * TI Touch Screen driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input/ti_am335x_tsc.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/ti_am335x_tscadc.h>
+
+#define ADCFSM_STEPID 0x10
+#define SEQ_SETTLE 275
+#define MAX_12BIT ((1 << 12) - 1)
+
+struct titsc {
+ struct input_dev *input;
+ struct ti_tscadc_dev *mfd_tscadc;
+ unsigned int irq;
+ unsigned int wires;
+ unsigned int x_plate_resistance;
+ bool pen_down;
+ int steps_to_configure;
+};
+
+static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
+{
+ return readl(ts->mfd_tscadc->tscadc_base + reg);
+}
+
+static void titsc_writel(struct titsc *tsc, unsigned int reg,
+ unsigned int val)
+{
+ writel(val, tsc->mfd_tscadc->tscadc_base + reg);
+}
+
+static void titsc_step_config(struct titsc *ts_dev)
+{
+ unsigned int config;
+ int i, total_steps;
+
+ /* Configure the Step registers */
+ total_steps = 2 * ts_dev->steps_to_configure;
+
+ config = STEPCONFIG_MODE_HWSYNC |
+ STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
+ switch (ts_dev->wires) {
+ case 4:
+ config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ break;
+ case 5:
+ config |= STEPCONFIG_YNN |
+ STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
+ STEPCONFIG_YPP;
+ break;
+ case 8:
+ config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+ break;
+ }
+
+ for (i = 1; i <= ts_dev->steps_to_configure; i++) {
+ titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+ }
+
+ config = 0;
+ config = STEPCONFIG_MODE_HWSYNC |
+ STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
+ STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
+ switch (ts_dev->wires) {
+ case 4:
+ config |= STEPCONFIG_YPP;
+ break;
+ case 5:
+ config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
+ STEPCONFIG_XNP | STEPCONFIG_YPN;
+ break;
+ case 8:
+ config |= STEPCONFIG_YPP;
+ break;
+ }
+
+ for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
+ titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+ }
+
+ config = 0;
+ /* Charge step configuration */
+ config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+ STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
+ STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
+
+ titsc_writel(ts_dev, REG_CHARGECONFIG, config);
+ titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
+
+ config = 0;
+ /* Configure to calculate pressure */
+ config = STEPCONFIG_MODE_HWSYNC |
+ STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
+ STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
+ titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
+ STEPCONFIG_OPENDLY);
+
+ config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
+ titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
+ titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
+ STEPCONFIG_OPENDLY);
+
+ titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+}
+
+static void titsc_read_coordinates(struct titsc *ts_dev,
+ unsigned int *x, unsigned int *y)
+{
+ unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
+ unsigned int prev_val_x = ~0, prev_val_y = ~0;
+ unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
+ unsigned int read, diff;
+ unsigned int i, channel;
+
+ /*
+ * Delta filter is used to remove large variations in sampled
+ * values from ADC. The filter tries to predict where the next
+ * coordinate could be. This is done by taking a previous
+ * coordinate and subtracting it form current one. Further the
+ * algorithm compares the difference with that of a present value,
+ * if true the value is reported to the sub system.
+ */
+ for (i = 0; i < fifocount - 1; i++) {
+ read = titsc_readl(ts_dev, REG_FIFO0);
+ channel = read & 0xf0000;
+ channel = channel >> 0x10;
+ if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
+ read &= 0xfff;
+ diff = abs(read - prev_val_x);
+ if (diff < prev_diff_x) {
+ prev_diff_x = diff;
+ *x = read;
+ }
+ prev_val_x = read;
+ }
+
+ read = titsc_readl(ts_dev, REG_FIFO1);
+ channel = read & 0xf0000;
+ channel = channel >> 0x10;
+ if ((channel >= ts_dev->steps_to_configure) &&
+ (channel < (2 * ts_dev->steps_to_configure - 1))) {
+ read &= 0xfff;
+ diff = abs(read - prev_val_y);
+ if (diff < prev_diff_y) {
+ prev_diff_y = diff;
+ *y = read;
+ }
+ prev_val_y = read;
+ }
+ }
+}
+
+static irqreturn_t titsc_irq(int irq, void *dev)
+{
+ struct titsc *ts_dev = dev;
+ struct input_dev *input_dev = ts_dev->input;
+ unsigned int status, irqclr = 0;
+ unsigned int x = 0, y = 0;
+ unsigned int z1, z2, z;
+ unsigned int fsm;
+ unsigned int fifo1count, fifo0count;
+ int i;
+
+ status = titsc_readl(ts_dev, REG_IRQSTATUS);
+ if (status & IRQENB_FIFO0THRES) {
+ titsc_read_coordinates(ts_dev, &x, &y);
+
+ z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
+ z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
+
+ fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
+ for (i = 0; i < fifo1count; i++)
+ titsc_readl(ts_dev, REG_FIFO1);
+
+ fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
+ for (i = 0; i < fifo0count; i++)
+ titsc_readl(ts_dev, REG_FIFO0);
+
+ if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
+ /*
+ * Calculate pressure using formula
+ * Resistance(touch) = x plate resistance *
+ * x postion/4096 * ((z2 / z1) - 1)
+ */
+ z = z2 - z1;
+ z *= x;
+ z *= ts_dev->x_plate_resistance;
+ z /= z1;
+ z = (z + 2047) >> 12;
+
+ if (z <= MAX_12BIT) {
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_report_abs(input_dev, ABS_PRESSURE, z);
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ input_sync(input_dev);
+ }
+ }
+ irqclr |= IRQENB_FIFO0THRES;
+ }
+
+ /*
+ * Time for sequencer to settle, to read
+ * correct state of the sequencer.
+ */
+ udelay(SEQ_SETTLE);
+
+ status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
+ if (status & IRQENB_PENUP) {
+ /* Pen up event */
+ fsm = titsc_readl(ts_dev, REG_ADCFSM);
+ if (fsm == ADCFSM_STEPID) {
+ ts_dev->pen_down = false;
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ input_sync(input_dev);
+ } else {
+ ts_dev->pen_down = true;
+ }
+ irqclr |= IRQENB_PENUP;
+ }
+
+ titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+
+ titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+ return IRQ_HANDLED;
+}
+
+/*
+ * The functions for inserting/removing driver as a module.
+ */
+
+static int titsc_probe(struct platform_device *pdev)
+{
+ struct titsc *ts_dev;
+ struct input_dev *input_dev;
+ struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+ struct mfd_tscadc_board *pdata;
+ int err;
+
+ pdata = tscadc_dev->dev->platform_data;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "Could not find platform data\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for device */
+ ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ts_dev || !input_dev) {
+ dev_err(&pdev->dev, "failed to allocate memory.\n");
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ tscadc_dev->tsc = ts_dev;
+ ts_dev->mfd_tscadc = tscadc_dev;
+ ts_dev->input = input_dev;
+ ts_dev->irq = tscadc_dev->irq;
+ ts_dev->wires = pdata->tsc_init->wires;
+ ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
+ ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
+
+ err = request_irq(ts_dev->irq, titsc_irq,
+ 0, pdev->dev.driver->name, ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to allocate irq.\n");
+ goto err_free_mem;
+ }
+
+ titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+ titsc_step_config(ts_dev);
+ titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
+
+ input_dev->name = "ti-tsc";
+ input_dev->dev.parent = &pdev->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+
+ /* register to the input system */
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_free_irq;
+
+ platform_set_drvdata(pdev, ts_dev);
+ return 0;
+
+err_free_irq:
+ free_irq(ts_dev->irq, ts_dev);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(ts_dev);
+ return err;
+}
+
+static int titsc_remove(struct platform_device *pdev)
+{
+ struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+ struct titsc *ts_dev = tscadc_dev->tsc;
+
+ free_irq(ts_dev->irq, ts_dev);
+
+ input_unregister_device(ts_dev->input);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(ts_dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int titsc_suspend(struct device *dev)
+{
+ struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+ struct titsc *ts_dev = tscadc_dev->tsc;
+ unsigned int idle;
+
+ if (device_may_wakeup(tscadc_dev->dev)) {
+ idle = titsc_readl(ts_dev, REG_IRQENABLE);
+ titsc_writel(ts_dev, REG_IRQENABLE,
+ (idle | IRQENB_HW_PEN));
+ titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
+ }
+ return 0;
+}
+
+static int titsc_resume(struct device *dev)
+{
+ struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+ struct titsc *ts_dev = tscadc_dev->tsc;
+
+ if (device_may_wakeup(tscadc_dev->dev)) {
+ titsc_writel(ts_dev, REG_IRQWAKEUP,
+ 0x00);
+ titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+ }
+ titsc_step_config(ts_dev);
+ titsc_writel(ts_dev, REG_FIFO0THR,
+ ts_dev->steps_to_configure);
+ return 0;
+}
+
+static const struct dev_pm_ops titsc_pm_ops = {
+ .suspend = titsc_suspend,
+ .resume = titsc_resume,
+};
+#define TITSC_PM_OPS (&titsc_pm_ops)
+#else
+#define TITSC_PM_OPS NULL
+#endif
+
+static struct platform_driver ti_tsc_driver = {
+ .probe = titsc_probe,
+ .remove = titsc_remove,
+ .driver = {
+ .name = "tsc",
+ .owner = THIS_MODULE,
+ .pm = TITSC_PM_OPS,
+ },
+};
+module_platform_driver(ti_tsc_driver);
+
+MODULE_DESCRIPTION("TI touchscreen controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c
deleted file mode 100644
index bcedf2e7468c..000000000000
--- a/drivers/input/touchscreen/ti_tscadc.c
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * TI Touch Screen driver
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input/ti_tscadc.h>
-#include <linux/delay.h>
-
-#define REG_IRQEOI 0x020
-#define REG_RAWIRQSTATUS 0x024
-#define REG_IRQSTATUS 0x028
-#define REG_IRQENABLE 0x02C
-#define REG_IRQWAKEUP 0x034
-#define REG_CTRL 0x040
-#define REG_ADCFSM 0x044
-#define REG_CLKDIV 0x04C
-#define REG_SE 0x054
-#define REG_IDLECONFIG 0x058
-#define REG_CHARGECONFIG 0x05C
-#define REG_CHARGEDELAY 0x060
-#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8))
-#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8))
-#define REG_STEPCONFIG13 0x0C4
-#define REG_STEPDELAY13 0x0C8
-#define REG_STEPCONFIG14 0x0CC
-#define REG_STEPDELAY14 0x0D0
-#define REG_FIFO0CNT 0xE4
-#define REG_FIFO1THR 0xF4
-#define REG_FIFO0 0x100
-#define REG_FIFO1 0x200
-
-/* Register Bitfields */
-#define IRQWKUP_ENB BIT(0)
-#define STPENB_STEPENB 0x7FFF
-#define IRQENB_FIFO1THRES BIT(5)
-#define IRQENB_PENUP BIT(9)
-#define STEPCONFIG_MODE_HWSYNC 0x2
-#define STEPCONFIG_SAMPLES_AVG (1 << 4)
-#define STEPCONFIG_XPP (1 << 5)
-#define STEPCONFIG_XNN (1 << 6)
-#define STEPCONFIG_YPP (1 << 7)
-#define STEPCONFIG_YNN (1 << 8)
-#define STEPCONFIG_XNP (1 << 9)
-#define STEPCONFIG_YPN (1 << 10)
-#define STEPCONFIG_INM (1 << 18)
-#define STEPCONFIG_INP (1 << 20)
-#define STEPCONFIG_INP_5 (1 << 21)
-#define STEPCONFIG_FIFO1 (1 << 26)
-#define STEPCONFIG_OPENDLY 0xff
-#define STEPCONFIG_Z1 (3 << 19)
-#define STEPIDLE_INP (1 << 22)
-#define STEPCHARGE_RFP (1 << 12)
-#define STEPCHARGE_INM (1 << 15)
-#define STEPCHARGE_INP (1 << 19)
-#define STEPCHARGE_RFM (1 << 23)
-#define STEPCHARGE_DELAY 0x1
-#define CNTRLREG_TSCSSENB (1 << 0)
-#define CNTRLREG_STEPID (1 << 1)
-#define CNTRLREG_STEPCONFIGWRT (1 << 2)
-#define CNTRLREG_4WIRE (1 << 5)
-#define CNTRLREG_5WIRE (1 << 6)
-#define CNTRLREG_8WIRE (3 << 5)
-#define CNTRLREG_TSCENB (1 << 7)
-#define ADCFSM_STEPID 0x10
-
-#define SEQ_SETTLE 275
-#define ADC_CLK 3000000
-#define MAX_12BIT ((1 << 12) - 1)
-#define TSCADC_DELTA_X 15
-#define TSCADC_DELTA_Y 15
-
-struct tscadc {
- struct input_dev *input;
- struct clk *tsc_ick;
- void __iomem *tsc_base;
- unsigned int irq;
- unsigned int wires;
- unsigned int x_plate_resistance;
- bool pen_down;
-};
-
-static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg)
-{
- return readl(ts->tsc_base + reg);
-}
-
-static void tscadc_writel(struct tscadc *tsc, unsigned int reg,
- unsigned int val)
-{
- writel(val, tsc->tsc_base + reg);
-}
-
-static void tscadc_step_config(struct tscadc *ts_dev)
-{
- unsigned int config;
- int i;
-
- /* Configure the Step registers */
-
- config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP;
- switch (ts_dev->wires) {
- case 4:
- config |= STEPCONFIG_INP | STEPCONFIG_XNN;
- break;
- case 5:
- config |= STEPCONFIG_YNN |
- STEPCONFIG_INP_5 | STEPCONFIG_XNN |
- STEPCONFIG_YPP;
- break;
- case 8:
- config |= STEPCONFIG_INP | STEPCONFIG_XNN;
- break;
- }
-
- for (i = 1; i < 7; i++) {
- tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
- tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
- }
-
- config = 0;
- config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN |
- STEPCONFIG_INM | STEPCONFIG_FIFO1;
- switch (ts_dev->wires) {
- case 4:
- config |= STEPCONFIG_YPP;
- break;
- case 5:
- config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 |
- STEPCONFIG_XNP | STEPCONFIG_YPN;
- break;
- case 8:
- config |= STEPCONFIG_YPP;
- break;
- }
-
- for (i = 7; i < 13; i++) {
- tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
- tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
- }
-
- config = 0;
- /* Charge step configuration */
- config = STEPCONFIG_XPP | STEPCONFIG_YNN |
- STEPCHARGE_RFP | STEPCHARGE_RFM |
- STEPCHARGE_INM | STEPCHARGE_INP;
-
- tscadc_writel(ts_dev, REG_CHARGECONFIG, config);
- tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY);
-
- config = 0;
- /* Configure to calculate pressure */
- config = STEPCONFIG_MODE_HWSYNC |
- STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP |
- STEPCONFIG_XNN | STEPCONFIG_INM;
- tscadc_writel(ts_dev, REG_STEPCONFIG13, config);
- tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY);
-
- config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1;
- tscadc_writel(ts_dev, REG_STEPCONFIG14, config);
- tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY);
-
- tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
-}
-
-static void tscadc_idle_config(struct tscadc *ts_config)
-{
- unsigned int idleconfig;
-
- idleconfig = STEPCONFIG_YNN |
- STEPCONFIG_INM |
- STEPCONFIG_YPN | STEPIDLE_INP;
- tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig);
-}
-
-static void tscadc_read_coordinates(struct tscadc *ts_dev,
- unsigned int *x, unsigned int *y)
-{
- unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT);
- unsigned int prev_val_x = ~0, prev_val_y = ~0;
- unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
- unsigned int read, diff;
- unsigned int i;
-
- /*
- * Delta filter is used to remove large variations in sampled
- * values from ADC. The filter tries to predict where the next
- * coordinate could be. This is done by taking a previous
- * coordinate and subtracting it form current one. Further the
- * algorithm compares the difference with that of a present value,
- * if true the value is reported to the sub system.
- */
- for (i = 0; i < fifocount - 1; i++) {
- read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
- diff = abs(read - prev_val_x);
- if (diff < prev_diff_x) {
- prev_diff_x = diff;
- *x = read;
- }
- prev_val_x = read;
-
- read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
- diff = abs(read - prev_val_y);
- if (diff < prev_diff_y) {
- prev_diff_y = diff;
- *y = read;
- }
- prev_val_y = read;
- }
-}
-
-static irqreturn_t tscadc_irq(int irq, void *dev)
-{
- struct tscadc *ts_dev = dev;
- struct input_dev *input_dev = ts_dev->input;
- unsigned int status, irqclr = 0;
- unsigned int x = 0, y = 0;
- unsigned int z1, z2, z;
- unsigned int fsm;
-
- status = tscadc_readl(ts_dev, REG_IRQSTATUS);
- if (status & IRQENB_FIFO1THRES) {
- tscadc_read_coordinates(ts_dev, &x, &y);
-
- z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
- z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
-
- if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
- /*
- * Calculate pressure using formula
- * Resistance(touch) = x plate resistance *
- * x postion/4096 * ((z2 / z1) - 1)
- */
- z = z2 - z1;
- z *= x;
- z *= ts_dev->x_plate_resistance;
- z /= z1;
- z = (z + 2047) >> 12;
-
- if (z <= MAX_12BIT) {
- input_report_abs(input_dev, ABS_X, x);
- input_report_abs(input_dev, ABS_Y, y);
- input_report_abs(input_dev, ABS_PRESSURE, z);
- input_report_key(input_dev, BTN_TOUCH, 1);
- input_sync(input_dev);
- }
- }
- irqclr |= IRQENB_FIFO1THRES;
- }
-
- /*
- * Time for sequencer to settle, to read
- * correct state of the sequencer.
- */
- udelay(SEQ_SETTLE);
-
- status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS);
- if (status & IRQENB_PENUP) {
- /* Pen up event */
- fsm = tscadc_readl(ts_dev, REG_ADCFSM);
- if (fsm == ADCFSM_STEPID) {
- ts_dev->pen_down = false;
- input_report_key(input_dev, BTN_TOUCH, 0);
- input_report_abs(input_dev, ABS_PRESSURE, 0);
- input_sync(input_dev);
- } else {
- ts_dev->pen_down = true;
- }
- irqclr |= IRQENB_PENUP;
- }
-
- tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr);
- /* check pending interrupts */
- tscadc_writel(ts_dev, REG_IRQEOI, 0x0);
-
- tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
- return IRQ_HANDLED;
-}
-
-/*
- * The functions for inserting/removing driver as a module.
- */
-
-static int tscadc_probe(struct platform_device *pdev)
-{
- const struct tsc_data *pdata = pdev->dev.platform_data;
- struct resource *res;
- struct tscadc *ts_dev;
- struct input_dev *input_dev;
- struct clk *clk;
- int err;
- int clk_value, ctrl, irq;
-
- if (!pdata) {
- dev_err(&pdev->dev, "missing platform data.\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no memory resource defined.\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no irq ID is specified.\n");
- return -EINVAL;
- }
-
- /* Allocate memory for device */
- ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ts_dev || !input_dev) {
- dev_err(&pdev->dev, "failed to allocate memory.\n");
- err = -ENOMEM;
- goto err_free_mem;
- }
-
- ts_dev->input = input_dev;
- ts_dev->irq = irq;
- ts_dev->wires = pdata->wires;
- ts_dev->x_plate_resistance = pdata->x_plate_resistance;
-
- res = request_mem_region(res->start, resource_size(res), pdev->name);
- if (!res) {
- dev_err(&pdev->dev, "failed to reserve registers.\n");
- err = -EBUSY;
- goto err_free_mem;
- }
-
- ts_dev->tsc_base = ioremap(res->start, resource_size(res));
- if (!ts_dev->tsc_base) {
- dev_err(&pdev->dev, "failed to map registers.\n");
- err = -ENOMEM;
- goto err_release_mem_region;
- }
-
- err = request_irq(ts_dev->irq, tscadc_irq,
- 0, pdev->dev.driver->name, ts_dev);
- if (err) {
- dev_err(&pdev->dev, "failed to allocate irq.\n");
- goto err_unmap_regs;
- }
-
- ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick");
- if (IS_ERR(ts_dev->tsc_ick)) {
- dev_err(&pdev->dev, "failed to get TSC ick\n");
- goto err_free_irq;
- }
- clk_enable(ts_dev->tsc_ick);
-
- clk = clk_get(&pdev->dev, "adc_tsc_fck");
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "failed to get TSC fck\n");
- err = PTR_ERR(clk);
- goto err_disable_clk;
- }
-
- clk_value = clk_get_rate(clk) / ADC_CLK;
- clk_put(clk);
-
- if (clk_value < 7) {
- dev_err(&pdev->dev, "clock input less than min clock requirement\n");
- goto err_disable_clk;
- }
- /* CLKDIV needs to be configured to the value minus 1 */
- tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1);
-
- /* Enable wake-up of the SoC using touchscreen */
- tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
-
- ctrl = CNTRLREG_STEPCONFIGWRT |
- CNTRLREG_TSCENB |
- CNTRLREG_STEPID;
- switch (ts_dev->wires) {
- case 4:
- ctrl |= CNTRLREG_4WIRE;
- break;
- case 5:
- ctrl |= CNTRLREG_5WIRE;
- break;
- case 8:
- ctrl |= CNTRLREG_8WIRE;
- break;
- }
- tscadc_writel(ts_dev, REG_CTRL, ctrl);
-
- tscadc_idle_config(ts_dev);
- tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
- tscadc_step_config(ts_dev);
- tscadc_writel(ts_dev, REG_FIFO1THR, 6);
-
- ctrl |= CNTRLREG_TSCSSENB;
- tscadc_writel(ts_dev, REG_CTRL, ctrl);
-
- input_dev->name = "ti-tsc-adc";
- input_dev->dev.parent = &pdev->dev;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
- input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
-
- /* register to the input system */
- err = input_register_device(input_dev);
- if (err)
- goto err_disable_clk;
-
- platform_set_drvdata(pdev, ts_dev);
- return 0;
-
-err_disable_clk:
- clk_disable(ts_dev->tsc_ick);
- clk_put(ts_dev->tsc_ick);
-err_free_irq:
- free_irq(ts_dev->irq, ts_dev);
-err_unmap_regs:
- iounmap(ts_dev->tsc_base);
-err_release_mem_region:
- release_mem_region(res->start, resource_size(res));
-err_free_mem:
- input_free_device(input_dev);
- kfree(ts_dev);
- return err;
-}
-
-static int __devexit tscadc_remove(struct platform_device *pdev)
-{
- struct tscadc *ts_dev = platform_get_drvdata(pdev);
- struct resource *res;
-
- free_irq(ts_dev->irq, ts_dev);
-
- input_unregister_device(ts_dev->input);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- iounmap(ts_dev->tsc_base);
- release_mem_region(res->start, resource_size(res));
-
- clk_disable(ts_dev->tsc_ick);
- clk_put(ts_dev->tsc_ick);
-
- kfree(ts_dev);
-
- platform_set_drvdata(pdev, NULL);
- return 0;
-}
-
-static struct platform_driver ti_tsc_driver = {
- .probe = tscadc_probe,
- .remove = __devexit_p(tscadc_remove),
- .driver = {
- .name = "tsc",
- .owner = THIS_MODULE,
- },
-};
-module_platform_driver(ti_tsc_driver);
-
-MODULE_DESCRIPTION("TI touchscreen controller driver");
-MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
-MODULE_LICENSE("GPL");
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.