aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/irqchip/Kconfig')
-rw-r--r--drivers/irqchip/Kconfig66
1 files changed, 56 insertions, 10 deletions
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 5438abb1baba..80e10f4e213a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
menu "IRQ chip support"
config IRQCHIP
@@ -6,7 +7,6 @@ config IRQCHIP
config ARM_GIC
bool
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_MULTI_HANDLER
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
@@ -15,10 +15,10 @@ config ARM_GIC_PM
bool
depends on PM
select ARM_GIC
- select PM_CLK
config ARM_GIC_MAX_NR
int
+ depends on ARM_GIC
default 2 if ARCH_REALVIEW
default 1
@@ -33,7 +33,6 @@ config GIC_NON_BANKED
config ARM_GIC_V3
bool
- select IRQ_DOMAIN
select GENERIC_IRQ_MULTI_HANDLER
select IRQ_DOMAIN_HIERARCHY
select PARTITION_PERCPU
@@ -59,7 +58,6 @@ config ARM_GIC_V3_ITS_FSL_MC
config ARM_NVIC
bool
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_CHIP
@@ -89,6 +87,14 @@ config ALPINE_MSI
select PCI_MSI
select GENERIC_IRQ_CHIP
+config AL_FIC
+ bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
+ depends on OF || COMPILE_TEST
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ help
+ Support Amazon's Annapurna Labs Fabric Interrupt Controller.
+
config ATMEL_AIC_IRQ
bool
select GENERIC_IRQ_CHIP
@@ -160,6 +166,12 @@ config IMGPDC_IRQ
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+config IXP4XX_IRQ
+ bool
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_MULTI_HANDLER
+ select SPARSE_IRQ
+
config MADERA_IRQ
tristate
@@ -213,13 +225,26 @@ config RDA_INTC
select IRQ_DOMAIN
config RENESAS_INTC_IRQPIN
- bool
+ bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
select IRQ_DOMAIN
+ help
+ Enable support for the Renesas Interrupt Controller for external
+ interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
config RENESAS_IRQC
- bool
+ bool "Renesas R-Mobile APE6 and R-Car IRQC support" if COMPILE_TEST
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+ help
+ Enable support for the Renesas Interrupt Controller for external
+ devices, as found on R-Mobile APE6, R-Car Gen2, and R-Car Gen3 SoCs.
+
+config RENESAS_RZA1_IRQC
+ bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
+ to 8 external interrupts with configurable sense select.
config ST_IRQCHIP
bool
@@ -295,8 +320,11 @@ config RENESAS_H8300H_INTC
select IRQ_DOMAIN
config RENESAS_H8S_INTC
- bool
+ bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
select IRQ_DOMAIN
+ help
+ Enable support for the Renesas H8/300 Interrupt Controller, as found
+ on Renesas H8S SoCs.
config IMX_GPCV2
bool
@@ -352,7 +380,6 @@ config STM32_EXTI
config QCOM_IRQ_COMBINER
bool "QCOM IRQ combiner support"
depends on ARCH_QCOM && ACPI
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Say yes here to add support for the IRQ combiner devices embedded
@@ -369,7 +396,6 @@ config IRQ_UNIPHIER_AIDET
config MESON_IRQ_GPIO
bool "Meson GPIO Interrupt Multiplexer"
depends on ARCH_MESON
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Support Meson SoC Family GPIO Interrupt Multiplexer
@@ -385,7 +411,6 @@ config GOLDFISH_PIC
config QCOM_PDC
bool "QCOM PDC"
depends on ARCH_QCOM
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Power Domain Controller driver to manage and configure wakeup
@@ -425,6 +450,27 @@ config LS1X_IRQ
help
Support for the Loongson-1 platform Interrupt Controller.
+config TI_SCI_INTR_IRQCHIP
+ bool
+ depends on TI_SCI_PROTOCOL
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ This enables the irqchip driver support for K3 Interrupt router
+ over TI System Control Interface available on some new TI's SoCs.
+ If you wish to use interrupt router irq resources managed by the
+ TI System Controller, say Y here. Otherwise, say N.
+
+config TI_SCI_INTA_IRQCHIP
+ bool
+ depends on TI_SCI_PROTOCOL
+ select IRQ_DOMAIN_HIERARCHY
+ select TI_SCI_INTA_MSI_DOMAIN
+ help
+ This enables the irqchip driver support for K3 Interrupt aggregator
+ over TI System Control Interface available on some new TI's SoCs.
+ If you wish to use interrupt aggregator irq resources managed by the
+ TI System Controller, say Y here. Otherwise, say N.
+
endmenu
config SIFIVE_PLIC