diff options
Diffstat (limited to 'drivers/isdn/hysdn/boardergo.h')
| -rw-r--r-- | drivers/isdn/hysdn/boardergo.h | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/isdn/hysdn/boardergo.h b/drivers/isdn/hysdn/boardergo.h index c59422aa8c3f..e99bd81c4034 100644 --- a/drivers/isdn/hysdn/boardergo.h +++ b/drivers/isdn/hysdn/boardergo.h @@ -23,8 +23,8 @@ /* following DPRAM layout copied from OS2-driver boarderg.h */ typedef struct ErgDpram_tag { -/*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE]; -/*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE]; + /*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE]; + /*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE]; /*1C00 */ unsigned char bSoftUart[SIZE_RSV_SOFT_UART]; /* size 0x1B0 */ @@ -37,22 +37,22 @@ typedef struct ErgDpram_tag { /*1DB9 unsigned long ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */ /*1DF0 */ -/*1DF0 */ unsigned short volatile ToHyChannel; -/*1DF2 */ unsigned short volatile ToHySize; + /*1DF0 */ unsigned short volatile ToHyChannel; + /*1DF2 */ unsigned short volatile ToHySize; /*1DF4 */ unsigned char volatile ToHyFlag; /* !=0: msg for Hy waiting */ /*1DF5 */ unsigned char volatile ToPcFlag; /* !=0: msg for PC waiting */ -/*1DF6 */ unsigned short volatile ToPcChannel; -/*1DF8 */ unsigned short volatile ToPcSize; + /*1DF6 */ unsigned short volatile ToPcChannel; + /*1DF8 */ unsigned short volatile ToPcSize; /*1DFA */ unsigned char bRes1DBA[0x1E00 - 0x1DFA]; /* 6 bytes */ -/*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00]; -/*1F00 */ unsigned long TrapTable[62]; + /*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00]; + /*1F00 */ unsigned long TrapTable[62]; /*1FF8 */ unsigned char bRes1FF8[0x1FFB - 0x1FF8]; /* low part of reset vetor */ -/*1FFB */ unsigned char ToPcIntMetro; + /*1FFB */ unsigned char ToPcIntMetro; /* notes: * - metro has 32-bit boot ram - accessing * ToPcInt and ToHyInt would be the same; @@ -65,13 +65,13 @@ typedef struct ErgDpram_tag { * so E1 side should NOT change this byte * when writing! */ -/*1FFC */ unsigned char volatile ToHyNoDpramErrLog; + /*1FFC */ unsigned char volatile ToHyNoDpramErrLog; /* note: ToHyNoDpramErrLog is used to inform * boot loader, not to use DPRAM based * ErrLog; when DOS driver is rewritten * this becomes obsolete */ -/*1FFD */ unsigned char bRes1FFD; + /*1FFD */ unsigned char bRes1FFD; /*1FFE */ unsigned char ToPcInt; /* E1_intclear; on CHAMP2: E1_intset */ /*1FFF */ unsigned char ToHyInt; @@ -85,16 +85,16 @@ typedef struct ErgDpram_tag { #define PCI9050_INTR_REG 0x4C /* Interrupt register */ #define PCI9050_USER_IO 0x51 /* User I/O register */ - /* bitmask for PCI9050_INTR_REG: */ +/* bitmask for PCI9050_INTR_REG: */ #define PCI9050_INTR_REG_EN1 0x01 /* 1= enable (def.), 0= disable */ #define PCI9050_INTR_REG_POL1 0x02 /* 1= active high (def.), 0= active low */ #define PCI9050_INTR_REG_STAT1 0x04 /* 1= intr. active, 0= intr. not active (def.) */ #define PCI9050_INTR_REG_ENPCI 0x40 /* 1= PCI interrupts enable (def.) */ - /* bitmask for PCI9050_USER_IO: */ +/* bitmask for PCI9050_USER_IO: */ #define PCI9050_USER_IO_EN3 0x02 /* 1= disable , 0= enable (def.) */ #define PCI9050_USER_IO_DIR3 0x04 /* 1= output (def.), 0= input */ #define PCI9050_USER_IO_DAT3 0x08 /* 1= high (def.) , 0= low */ -#define PCI9050_E1_RESET ( PCI9050_USER_IO_DIR3) /* 0x04 */ -#define PCI9050_E1_RUN (PCI9050_USER_IO_DAT3|PCI9050_USER_IO_DIR3) /* 0x0C */ +#define PCI9050_E1_RESET (PCI9050_USER_IO_DIR3) /* 0x04 */ +#define PCI9050_E1_RUN (PCI9050_USER_IO_DAT3 | PCI9050_USER_IO_DIR3) /* 0x0C */ |