diff options
Diffstat (limited to 'drivers/isdn/sc/command.c')
| -rw-r--r-- | drivers/isdn/sc/command.c | 441 |
1 files changed, 441 insertions, 0 deletions
diff --git a/drivers/isdn/sc/command.c b/drivers/isdn/sc/command.c new file mode 100644 index 000000000000..b2c4eac7cef5 --- /dev/null +++ b/drivers/isdn/sc/command.c @@ -0,0 +1,441 @@ +/* $Id: command.c,v 1.4.10.1 2001/09/23 22:24:59 kai Exp $ + * + * Copyright (C) 1996 SpellCaster Telecommunications Inc. + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + * For more information, please contact gpl-info@spellcast.com or write: + * + * SpellCaster Telecommunications Inc. + * 5621 Finch Avenue East, Unit #3 + * Scarborough, Ontario Canada + * M1B 2T9 + * +1 (416) 297-8565 + * +1 (416) 297-6433 Facsimile + */ + +#include <linux/module.h> +#include "includes.h" /* This must be first */ +#include "hardware.h" +#include "message.h" +#include "card.h" +#include "scioc.h" + +int dial(int card, unsigned long channel, setup_parm setup); +int hangup(int card, unsigned long channel); +int answer(int card, unsigned long channel); +int clreaz(int card, unsigned long channel); +int seteaz(int card, unsigned long channel, char *); +int setl2(int card, unsigned long arg); +int setl3(int card, unsigned long arg); +int acceptb(int card, unsigned long channel); + +extern int cinst; +extern board *sc_adapter[]; + +extern int sc_ioctl(int, scs_ioctl *); +extern int setup_buffers(int, int, unsigned int); +extern int indicate_status(int, int,ulong,char*); +extern void check_reset(unsigned long); +extern int send_and_receive(int, unsigned int, unsigned char, unsigned char, + unsigned char, unsigned char, unsigned char, unsigned char *, + RspMessage *, int); +extern int sendmessage(int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int *); +extern inline void pullphone(char *, char *); + +#ifdef DEBUG +/* + * Translate command codes to strings + */ +static char *commands[] = { "ISDN_CMD_IOCTL", + "ISDN_CMD_DIAL", + "ISDN_CMD_ACCEPTB", + "ISDN_CMD_ACCEPTB", + "ISDN_CMD_HANGUP", + "ISDN_CMD_CLREAZ", + "ISDN_CMD_SETEAZ", + NULL, + NULL, + NULL, + "ISDN_CMD_SETL2", + NULL, + "ISDN_CMD_SETL3", + NULL, + NULL, + NULL, + NULL, + NULL, }; + +/* + * Translates ISDN4Linux protocol codes to strings for debug messages + */ +static char *l3protos[] = { "ISDN_PROTO_L3_TRANS" }; +static char *l2protos[] = { "ISDN_PROTO_L2_X75I", + "ISDN_PROTO_L2_X75UI", + "ISDN_PROTO_L2_X75BUI", + "ISDN_PROTO_L2_HDLC", + "ISDN_PROTO_L2_TRANS" }; +#endif + +int get_card_from_id(int driver) +{ + int i; + + for(i = 0 ; i < cinst ; i++) { + if(sc_adapter[i]->driverId == driver) + return i; + } + return -ENODEV; +} + +/* + * command + */ + +int command(isdn_ctrl *cmd) +{ + int card; + + card = get_card_from_id(cmd->driver); + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + pr_debug("%s: Received %s command from Link Layer\n", + sc_adapter[card]->devicename, commands[cmd->command]); + + /* + * Dispatch the command + */ + switch(cmd->command) { + case ISDN_CMD_IOCTL: + { + unsigned long cmdptr; + scs_ioctl ioc; + + memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long)); + if (copy_from_user(&ioc, (scs_ioctl __user *)cmdptr, + sizeof(scs_ioctl))) { + pr_debug("%s: Failed to verify user space 0x%x\n", + sc_adapter[card]->devicename, cmdptr); + return -EFAULT; + } + return sc_ioctl(card, &ioc); + } + case ISDN_CMD_DIAL: + return dial(card, cmd->arg, cmd->parm.setup); + case ISDN_CMD_HANGUP: + return hangup(card, cmd->arg); + case ISDN_CMD_ACCEPTD: + return answer(card, cmd->arg); + case ISDN_CMD_ACCEPTB: + return acceptb(card, cmd->arg); + case ISDN_CMD_CLREAZ: + return clreaz(card, cmd->arg); + case ISDN_CMD_SETEAZ: + return seteaz(card, cmd->arg, cmd->parm.num); + case ISDN_CMD_SETL2: + return setl2(card, cmd->arg); + case ISDN_CMD_SETL3: + return setl3(card, cmd->arg); + default: + return -EINVAL; + } + return 0; +} + +/* + * Confirm our ability to communicate with the board. This test assumes no + * other message activity is present + */ +int loopback(int card) +{ + + int status; + static char testmsg[] = "Test Message"; + RspMessage rspmsg; + + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + pr_debug("%s: Sending loopback message\n", + sc_adapter[card]->devicename); + + /* + * Send the loopback message to confirm that memory transfer is + * operational + */ + status = send_and_receive(card, CMPID, cmReqType1, + cmReqClass0, + cmReqMsgLpbk, + 0, + (unsigned char) strlen(testmsg), + (unsigned char *)testmsg, + &rspmsg, SAR_TIMEOUT); + + + if (!status) { + pr_debug("%s: Loopback message successfully sent\n", + sc_adapter[card]->devicename); + if(strcmp(rspmsg.msg_data.byte_array, testmsg)) { + pr_debug("%s: Loopback return != sent\n", + sc_adapter[card]->devicename); + return -EIO; + } + return 0; + } + else { + pr_debug("%s: Send loopback message failed\n", + sc_adapter[card]->devicename); + return -EIO; + } + +} + +/* + * start the onboard firmware + */ +int startproc(int card) +{ + int status; + + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + /* + * send start msg + */ + status = sendmessage(card, CMPID,cmReqType2, + cmReqClass0, + cmReqStartProc, + 0,0,NULL); + pr_debug("%s: Sent startProc\n", sc_adapter[card]->devicename); + + return status; +} + + +int loadproc(int card, char *data) +{ + return -1; +} + + +/* + * Dials the number passed in + */ +int dial(int card, unsigned long channel, setup_parm setup) +{ + int status; + char Phone[48]; + + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + /*extract ISDN number to dial from eaz/msn string*/ + strcpy(Phone,setup.phone); + + /*send the connection message*/ + status = sendmessage(card, CEPID,ceReqTypePhy, + ceReqClass1, + ceReqPhyConnect, + (unsigned char) channel+1, + strlen(Phone), + (unsigned int *) Phone); + + pr_debug("%s: Dialing %s on channel %d\n", + sc_adapter[card]->devicename, Phone, channel+1); + + return status; +} + +/* + * Answer an incoming call + */ +int answer(int card, unsigned long channel) +{ + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + if(setup_buffers(card, channel+1, BUFFER_SIZE)) { + hangup(card, channel+1); + return -ENOBUFS; + } + + indicate_status(card, ISDN_STAT_BCONN,channel,NULL); + pr_debug("%s: Answered incoming call on channel %s\n", + sc_adapter[card]->devicename, channel+1); + return 0; +} + +/* + * Hangup up the call on specified channel + */ +int hangup(int card, unsigned long channel) +{ + int status; + + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + status = sendmessage(card, CEPID, ceReqTypePhy, + ceReqClass1, + ceReqPhyDisconnect, + (unsigned char) channel+1, + 0, + NULL); + pr_debug("%s: Sent HANGUP message to channel %d\n", + sc_adapter[card]->devicename, channel+1); + return status; +} + +/* + * Set the layer 2 protocol (X.25, HDLC, Raw) + */ +int setl2(int card, unsigned long arg) +{ + int status =0; + int protocol,channel; + + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + protocol = arg >> 8; + channel = arg & 0xff; + sc_adapter[card]->channel[channel].l2_proto = protocol; + pr_debug("%s: Level 2 protocol for channel %d set to %s from %d\n", + sc_adapter[card]->devicename, channel+1, + l2protos[sc_adapter[card]->channel[channel].l2_proto],protocol); + + /* + * check that the adapter is also set to the correct protocol + */ + pr_debug("%s: Sending GetFrameFormat for channel %d\n", + sc_adapter[card]->devicename, channel+1); + status = sendmessage(card, CEPID, ceReqTypeCall, + ceReqClass0, + ceReqCallGetFrameFormat, + (unsigned char)channel+1, + 1, + (unsigned int *) protocol); + if(status) + return status; + return 0; +} + +/* + * Set the layer 3 protocol + */ +int setl3(int card, unsigned long channel) +{ + int protocol = channel >> 8; + + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + sc_adapter[card]->channel[channel].l3_proto = protocol; + pr_debug("%s: Level 3 protocol for channel %d set to %s\n", + sc_adapter[card]->devicename, channel+1, l3protos[protocol]); + return 0; +} + +int acceptb(int card, unsigned long channel) +{ + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + if(setup_buffers(card, channel+1, BUFFER_SIZE)) + { + hangup(card, channel+1); + return -ENOBUFS; + } + + pr_debug("%s: B-Channel connection accepted on channel %d\n", + sc_adapter[card]->devicename, channel+1); + indicate_status(card, ISDN_STAT_BCONN, channel, NULL); + return 0; +} + +int clreaz(int card, unsigned long arg) +{ + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + strcpy(sc_adapter[card]->channel[arg].eazlist, ""); + sc_adapter[card]->channel[arg].eazclear = 1; + pr_debug("%s: EAZ List cleared for channel %d\n", + sc_adapter[card]->devicename, arg+1); + return 0; +} + +int seteaz(int card, unsigned long arg, char *num) +{ + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + strcpy(sc_adapter[card]->channel[arg].eazlist, num); + sc_adapter[card]->channel[arg].eazclear = 0; + pr_debug("%s: EAZ list for channel %d set to: %s\n", + sc_adapter[card]->devicename, arg+1, + sc_adapter[card]->channel[arg].eazlist); + return 0; +} + +int reset(int card) +{ + unsigned long flags; + + if(!IS_VALID_CARD(card)) { + pr_debug("Invalid param: %d is not a valid card id\n", card); + return -ENODEV; + } + + indicate_status(card, ISDN_STAT_STOP, 0, NULL); + + if(sc_adapter[card]->EngineUp) { + del_timer(&sc_adapter[card]->stat_timer); + } + + sc_adapter[card]->EngineUp = 0; + + spin_lock_irqsave(&sc_adapter[card]->lock, flags); + init_timer(&sc_adapter[card]->reset_timer); + sc_adapter[card]->reset_timer.function = check_reset; + sc_adapter[card]->reset_timer.data = card; + sc_adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME; + add_timer(&sc_adapter[card]->reset_timer); + spin_unlock_irqrestore(&sc_adapter[card]->lock, flags); + + outb(0x1,sc_adapter[card]->ioport[SFT_RESET]); + + pr_debug("%s: Adapter Reset\n", sc_adapter[card]->devicename); + return 0; +} + +void flushreadfifo (int card) +{ + while(inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) + inb(sc_adapter[card]->ioport[FIFO_READ]); +} |