aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/dvb-usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig12
-rw-r--r--drivers/media/dvb/dvb-usb/Makefile4
-rw-r--r--drivers/media/dvb/dvb-usb/au6610.c6
-rw-r--r--drivers/media/dvb/dvb-usb/cxusb.c4
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700_core.c4
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-ids.h6
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-remote.c2
-rw-r--r--drivers/media/dvb/dvb-usb/gl861.c8
-rw-r--r--drivers/media/dvb/dvb-usb/m920x.c235
-rw-r--r--drivers/media/dvb/dvb-usb/m920x.h46
-rw-r--r--drivers/media/dvb/dvb-usb/opera1.c581
-rw-r--r--drivers/media/dvb/dvb-usb/opera1.h9
-rw-r--r--drivers/media/dvb/dvb-usb/ttusb2.c7
13 files changed, 822 insertions, 102 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 80f67a51b908..54488737a08f 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -33,6 +33,7 @@ config DVB_USB_A800
config DVB_USB_DIBUSB_MB
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
depends on DVB_USB
+ select DVB_PLL
select DVB_DIB3000MB
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
@@ -88,6 +89,7 @@ config DVB_USB_DIB0700
config DVB_USB_UMT_010
tristate "HanfTek UMT-010 DVB-T USB2.0 support"
depends on DVB_USB
+ select DVB_PLL
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
@@ -96,9 +98,9 @@ config DVB_USB_UMT_010
config DVB_USB_CXUSB
tristate "Conexant USB2.0 hybrid reference design support"
depends on DVB_USB
+ select DVB_PLL
select DVB_CX22702 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
- select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
help
@@ -140,6 +142,7 @@ config DVB_USB_AU6610
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
depends on DVB_USB
+ select DVB_PLL
select DVB_NXT6000 if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
help
@@ -208,3 +211,10 @@ config DVB_USB_DTT200U
The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).
The WT-220U and its clones are pen-sized.
+
+config DVB_USB_OPERA1
+ tristate "Opera1 DVB-S USB2.0 receiver"
+ depends on DVB_USB
+ select DVB_STV0299 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the Opera DVB-S USB2.0 receiver.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 40f28f559b54..976f840cc904 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -51,4 +51,8 @@ obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o
dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o
obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o
+dvb-usb-opera-objs = opera1.o
+obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o
+
+
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c
index 0dc66a8d2baf..18e0b16fb2a9 100644
--- a/drivers/media/dvb/dvb-usb/au6610.c
+++ b/drivers/media/dvb/dvb-usb/au6610.c
@@ -40,7 +40,7 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
}
ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation,
- USB_TYPE_VENDOR|USB_DIR_IN, addr, index, usb_buf,
+ USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf,
sizeof(usb_buf), AU6610_USB_TIMEOUT);
if (ret < 0)
@@ -124,7 +124,7 @@ static int au6610_identify_state(struct usb_device *udev,
}
static struct zl10353_config au6610_zl10353_config = {
- .demod_address = 0x1e,
+ .demod_address = 0x0f,
.no_tuner = 1,
.parallel_ts = 1,
};
@@ -140,7 +140,7 @@ static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
}
static struct qt1010_config au6610_qt1010_config = {
- .i2c_address = 0xc4
+ .i2c_address = 0x62
};
static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 127a94b9a1b5..bac2ae3b4a1f 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -27,7 +27,6 @@
#include "cx22702.h"
#include "lgdt330x.h"
-#include "lgh06xf.h"
#include "mt352.h"
#include "mt352_priv.h"
#include "zl10353.h"
@@ -388,7 +387,8 @@ static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap)
static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
{
- dvb_attach(lgh06xf_attach, adap->fe, &adap->dev->i2c_adap);
+ dvb_attach(dvb_pll_attach, adap->fe, 0x61, &adap->dev->i2c_adap,
+ &dvb_pll_lg_tdvs_h06xf);
return 0;
}
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 6a4d150784a6..dddf164f269a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -56,10 +56,6 @@ static int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u
if (txlen > 3)
index |= tx[3];
- /* think about swapping here */
- value = le16_to_cpu(value);
- index = le16_to_cpu(index);
-
status = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), tx[0],
USB_TYPE_VENDOR | USB_DIR_IN, value, index, rx, rxlen,
USB_CTRL_GET_TIMEOUT);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 148386aba275..97715f7514d6 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -13,6 +13,7 @@
#define USB_VID_ADSTECH 0x06e1
#define USB_VID_ALCOR_MICRO 0x058f
#define USB_VID_ANCHOR 0x0547
+#define USB_VID_ANUBIS_ELECTRONIC 0x10fd
#define USB_VID_AVERMEDIA 0x07ca
#define USB_VID_COMPRO 0x185b
#define USB_VID_COMPRO_UNK 0x145f
@@ -31,6 +32,7 @@
#define USB_VID_LITEON 0x04ca
#define USB_VID_MEDION 0x1660
#define USB_VID_MSI 0x0db0
+#define USB_VID_OPERA1 0x695c
#define USB_VID_PINNACLE 0x2304
#define USB_VID_VISIONPLUS 0x13d3
#define USB_VID_TWINHAN 0x1822
@@ -127,6 +129,7 @@
#define USB_PID_KYE_DVB_T_WARM 0x701f
#define USB_PID_PCTV_200E 0x020e
#define USB_PID_PCTV_400E 0x020f
+#define USB_PID_PCTV_450E 0x0222
#define USB_PID_LITEON_DVB_T_COLD 0xf000
#define USB_PID_LITEON_DVB_T_WARM 0xf001
#define USB_PID_DIGIVOX_MINI_SL_COLD 0xe360
@@ -139,6 +142,9 @@
#define USB_PID_GENPIX_8PSK_COLD 0x0200
#define USB_PID_GENPIX_8PSK_WARM 0x0201
#define USB_PID_SIGMATEK_DVB_110 0x6610
+#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513
+#define USB_PID_OPERA1_COLD 0x2830
+#define USB_PID_OPERA1_WARM 0x3829
#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 9511a31c8f50..68ed3a788083 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -107,8 +107,6 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
return -ENOMEM;
input_dev->evbit[0] = BIT(EV_KEY);
- input_dev->keycodesize = sizeof(unsigned char);
- input_dev->keycodemax = KEY_MAX;
input_dev->name = "IR-receiver inside an USB DVB receiver";
input_dev->phys = d->rc_phys;
usb_to_input_id(d->udev, &input_dev->id);
diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c
index c9f38a5e70d3..e0587e663591 100644
--- a/drivers/media/dvb/dvb-usb/gl861.c
+++ b/drivers/media/dvb/dvb-usb/gl861.c
@@ -12,7 +12,7 @@
#include "qt1010.h"
/* debug */
-int dvb_usb_gl861_debug;
+static int dvb_usb_gl861_debug;
module_param_named(debug,dvb_usb_gl861_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
@@ -20,7 +20,7 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
{
u16 index;
- u16 value = addr << 8;
+ u16 value = addr << (8 + 1);
int wo = (rbuf == NULL || rlen == 0); /* write-only */
u8 req, type;
@@ -101,7 +101,7 @@ static int gl861_identify_state(struct usb_device *udev,
}
static struct zl10353_config gl861_zl10353_config = {
- .demod_address = 0x1e,
+ .demod_address = 0x0f,
.no_tuner = 1,
.parallel_ts = 1,
};
@@ -117,7 +117,7 @@ static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
}
static struct qt1010_config gl861_qt1010_config = {
- .i2c_address = 0xc4
+ .i2c_address = 0x62
};
static int gl861_tuner_attach(struct dvb_usb_adapter *adap)
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index d48b24d9abf4..45d7bc214c18 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -14,6 +14,8 @@
#include "mt352.h"
#include "mt352_priv.h"
#include "qt1010.h"
+#include "tda1004x.h"
+#include "tda827x.h"
/* debug */
static int dvb_usb_m920x_debug;
@@ -47,11 +49,15 @@ static inline int m9206_read(struct usb_device *udev, u8 request, u16 value,\
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
request, USB_TYPE_VENDOR | USB_DIR_IN,
value, index, data, size, 2000);
- if (ret < 0)
+ if (ret < 0) {
+ printk(KERN_INFO "m920x_read = error: %d\n", ret);
return ret;
+ }
- if (ret != size)
+ if (ret != size) {
+ deb_rc("m920x_read = no data\n");
return -EIO;
+ }
return 0;
}
@@ -64,19 +70,22 @@ static inline int m9206_write(struct usb_device *udev, u8 request,
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
request, USB_TYPE_VENDOR | USB_DIR_OUT,
value, index, NULL, 0, 2000);
+
return ret;
}
-static int m9206_rc_init(struct usb_device *udev)
+static int m9206_init(struct dvb_usb_device *d)
{
int ret = 0;
/* Remote controller init. */
- if ((ret = m9206_write(udev, M9206_CORE, 0xa8, M9206_RC_INIT2)) != 0)
- return ret;
+ if (d->props.rc_query) {
+ if ((ret = m9206_write(d->udev, M9206_CORE, 0xa8, M9206_RC_INIT2)) != 0)
+ return ret;
- if ((ret = m9206_write(udev, M9206_CORE, 0x51, M9206_RC_INIT1)) != 0)
- return ret;
+ if ((ret = m9206_write(d->udev, M9206_CORE, 0x51, M9206_RC_INIT1)) != 0)
+ return ret;
+ }
return ret;
}
@@ -87,16 +96,15 @@ static int m9206_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
int i, ret = 0;
u8 rc_state[2];
-
if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
goto unlock;
if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
goto unlock;
- for (i = 0; i < ARRAY_SIZE(megasky_rc_keys); i++)
- if (megasky_rc_keys[i].data == rc_state[1]) {
- *event = megasky_rc_keys[i].event;
+ for (i = 0; i < d->props.rc_key_map_size; i++)
+ if (d->props.rc_key_map[i].data == rc_state[1]) {
+ *event = d->props.rc_key_map[i].event;
switch(rc_state[0]) {
case 0x80:
@@ -137,53 +145,51 @@ static int m9206_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
- struct m9206_state *m = d->priv;
- int i;
+ int i, j;
int ret = 0;
+ if (!num)
+ return -EINVAL;
+
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
- if (num > 2)
- return -EINVAL;
-
for (i = 0; i < num; i++) {
- if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].addr, 0x80)) != 0)
- goto unlock;
-
- if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].buf[0], 0x0)) != 0)
+ if (msg[i].flags & (I2C_M_NO_RD_ACK|I2C_M_IGNORE_NAK|I2C_M_TEN) ||
+ msg[i].len == 0) {
+ /* For a 0 byte message, I think sending the address to index 0x80|0x40
+ * would be the correct thing to do. However, zero byte messages are
+ * only used for probing, and since we don't know how to get the slave's
+ * ack, we can't probe. */
+ ret = -ENOTSUPP;
goto unlock;
-
- if (i + 1 < num && msg[i + 1].flags & I2C_M_RD) {
- int i2c_i;
-
- for (i2c_i = 0; i2c_i < M9206_I2C_MAX; i2c_i++)
- if (msg[i].addr == m->i2c_r[i2c_i].addr)
- break;
-
- if (i2c_i >= M9206_I2C_MAX) {
- deb_rc("No magic for i2c addr!\n");
- ret = -EINVAL;
+ }
+ /* Send START & address/RW bit */
+ if (!(msg[i].flags & I2C_M_NOSTART)) {
+ if ((ret = m9206_write(d->udev, M9206_I2C, (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), 0x80)) != 0)
goto unlock;
+ /* Should check for ack here, if we knew how. */
+ }
+ if (msg[i].flags & I2C_M_RD) {
+ for (j = 0; j < msg[i].len; j++) {
+ /* Last byte of transaction? Send STOP, otherwise send ACK. */
+ int stop = (i+1 == num && j+1 == msg[i].len)?0x40:0x01;
+ if ((ret = m9206_read(d->udev, M9206_I2C, 0x0, 0x20|stop, &msg[i].buf[j], 1)) != 0)
+ goto unlock;
}
-
- if ((ret = m9206_write(d->udev, M9206_I2C, m->i2c_r[i2c_i].magic, 0x80)) != 0)
- goto unlock;
-
- if ((ret = m9206_read(d->udev, M9206_I2C, 0x0, 0x60, msg[i + 1].buf, msg[i + 1].len)) != 0)
- goto unlock;
-
- i++;
} else {
- if (msg[i].len != 2)
- return -EINVAL;
-
- if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].buf[1], 0x40)) != 0)
- goto unlock;
+ for (j = 0; j < msg[i].len; j++) {
+ /* Last byte of transaction? Then send STOP. */
+ int stop = (i+1 == num && j+1 == msg[i].len)?0x40:0x00;
+ if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
+ goto unlock;
+ /* Should check for ack here too. */
+ }
}
}
- ret = i;
- unlock:
+ ret = num;
+
+unlock:
mutex_unlock(&d->i2c_mutex);
return ret;
@@ -324,6 +330,7 @@ static int m9206_firmware_download(struct usb_device *udev,
i += size;
}
if (i != fw->size) {
+ deb_rc("bad firmware file!\n");
ret = -EINVAL;
goto done;
}
@@ -342,10 +349,10 @@ static int m9206_firmware_download(struct usb_device *udev,
}
/* Callbacks for DVB USB */
-static int megasky_identify_state(struct usb_device *udev,
- struct dvb_usb_device_properties *props,
- struct dvb_usb_device_description **desc,
- int *cold)
+static int m920x_identify_state(struct usb_device *udev,
+ struct dvb_usb_device_properties *props,
+ struct dvb_usb_device_description **desc,
+ int *cold)
{
struct usb_host_interface *alt;
@@ -381,20 +388,15 @@ static int megasky_mt352_demod_init(struct dvb_frontend *fe)
}
static struct mt352_config megasky_mt352_config = {
- .demod_address = 0x1e,
+ .demod_address = 0x0f,
.no_tuner = 1,
.demod_init = megasky_mt352_demod_init,
};
static int megasky_mt352_frontend_attach(struct dvb_usb_adapter *adap)
{
- struct m9206_state *m = adap->dev->priv;
-
deb_rc("megasky_frontend_attach!\n");
- m->i2c_r[M9206_I2C_DEMOD].addr = megasky_mt352_config.demod_address;
- m->i2c_r[M9206_I2C_DEMOD].magic = 0x1f;
-
if ((adap->fe = dvb_attach(mt352_attach, &megasky_mt352_config, &adap->dev->i2c_adap)) == NULL)
return -EIO;
@@ -402,16 +404,11 @@ static int megasky_mt352_frontend_attach(struct dvb_usb_adapter *adap)
}
static struct qt1010_config megasky_qt1010_config = {
- .i2c_address = 0xc4
+ .i2c_address = 0x62
};
static int megasky_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
{
- struct m9206_state *m = adap->dev->priv;
-
- m->i2c_r[M9206_I2C_TUNER].addr = megasky_qt1010_config.i2c_address;
- m->i2c_r[M9206_I2C_TUNER].magic = 0xc5;
-
if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
&megasky_qt1010_config) == NULL)
return -ENODEV;
@@ -419,8 +416,40 @@ static int megasky_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
return 0;
}
+static struct tda1004x_config digivox_tda10046_config = {
+ .demod_address = 0x08,
+ .invert = 0,
+ .invert_oclk = 0,
+ .ts_mode = TDA10046_TS_SERIAL,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .if_freq = TDA10046_FREQ_045,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GPTRI,
+ .request_firmware = NULL,
+};
+
+static int digivox_tda10046_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ deb_rc("digivox_tda10046_frontend_attach!\n");
+
+ if ((adap->fe = dvb_attach(tda10046_attach, &digivox_tda10046_config,
+ &adap->dev->i2c_adap)) == NULL)
+ return -EIO;
+
+ return 0;
+}
+
+static int digivox_tda8275_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap,
+ NULL) == NULL)
+ return -ENODEV;
+ return 0;
+}
+
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties megasky_properties;
+static struct dvb_usb_device_properties digivox_mini_ii_properties;
static int m920x_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -429,30 +458,36 @@ static int m920x_probe(struct usb_interface *intf,
struct usb_host_interface *alt;
int ret;
- if ((ret = dvb_usb_device_init(intf, &megasky_properties, THIS_MODULE, &d)) == 0) {
- deb_rc("probed!\n");
+ deb_rc("Probed!\n");
- alt = usb_altnum_to_altsetting(intf, 1);
- if (alt == NULL) {
- deb_rc("not alt found!\n");
- return -ENODEV;
- }
+ if (((ret = dvb_usb_device_init(intf, &megasky_properties, THIS_MODULE, &d)) == 0) ||
+ ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, THIS_MODULE, &d)) == 0))
+ goto found;
- ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
- alt->desc.bAlternateSetting);
- if (ret < 0)
- return ret;
-
- deb_rc("Changed to alternate setting!\n");
+ return ret;
- if ((ret = m9206_rc_init(d->udev)) != 0)
- return ret;
+found:
+ alt = usb_altnum_to_altsetting(intf, 1);
+ if (alt == NULL) {
+ deb_rc("No alt found!\n");
+ return -ENODEV;
}
+
+ ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
+ alt->desc.bAlternateSetting);
+ if (ret < 0)
+ return ret;
+
+ if ((ret = m9206_init(d)) != 0)
+ return ret;
+
return ret;
}
static struct usb_device_id m920x_table [] = {
{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
+ { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
+ USB_PID_MSI_DIGI_VOX_MINI_II) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, m920x_table);
@@ -471,7 +506,7 @@ static struct dvb_usb_device_properties megasky_properties = {
.size_of_priv = sizeof(struct m9206_state),
- .identify_state = megasky_identify_state,
+ .identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
@@ -502,6 +537,50 @@ static struct dvb_usb_device_properties megasky_properties = {
{ "MSI Mega Sky 580 DVB-T USB2.0",
{ &m920x_table[0], NULL },
{ NULL },
+ }
+ }
+};
+
+static struct dvb_usb_device_properties digivox_mini_ii_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .firmware = "dvb-usb-digivox-02.fw",
+ .download_firmware = m9206_firmware_download,
+
+ .size_of_priv = sizeof(struct m9206_state),
+
+ .identify_state = m920x_identify_state,
+ .num_adapters = 1,
+ .adapter = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 8,
+ .pid_filter = m9206_pid_filter,
+ .pid_filter_ctrl = m9206_pid_filter_ctrl,
+
+ .frontend_attach = digivox_tda10046_frontend_attach,
+ .tuner_attach = digivox_tda8275_tuner_attach,
+
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x81,
+ .u = {
+ .bulk = {
+ .buffersize = 0x4000,
+ }
+ }
+ },
+ }},
+ .i2c_algo = &m9206_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ { "MSI DIGI VOX mini II DVB-T USB2.0",
+ { &m920x_table[1], NULL },
+ { NULL },
},
}
};
diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h
index c354196ffe5d..7dd3db65c80e 100644
--- a/drivers/media/dvb/dvb-usb/m920x.h
+++ b/drivers/media/dvb/dvb-usb/m920x.h
@@ -19,17 +19,49 @@
#define M9206_MAX_FILTERS 8
-#define M9206_I2C_TUNER 0
-#define M9206_I2C_DEMOD 1
-#define M9206_I2C_MAX 2
+/*
+sequences found in logs:
+[index value]
+0x80 write addr
+(0x00 out byte)*
+0x40 out byte
+
+0x80 write addr
+(0x00 out byte)*
+0x80 read addr
+(0x21 in byte)*
+0x60 in byte
+
+this sequence works:
+0x80 read addr
+(0x21 in byte)*
+0x60 in byte
+
+Guess at API of the I2C function:
+I2C operation is done one byte at a time with USB control messages. The
+index the messages is sent to is made up of a set of flags that control
+the I2C bus state:
+0x80: Send START condition. After a START condition, one would normally
+ always send the 7-bit slave I2C address as the 7 MSB, followed by
+ the read/write bit as the LSB.
+0x40: Send STOP condition. This should be set on the last byte of an
+ I2C transaction.
+0x20: Read a byte from the slave. As opposed to writing a byte to the
+ slave. The slave will normally not produce any data unless you
+ set the R/W bit to 1 when sending the slave's address after the
+ START condition.
+0x01: Respond with ACK, as opposed to a NACK. For a multi-byte read,
+ the master should send an ACK, that is pull SDA low during the 9th
+ clock cycle, after every byte but the last. This flags only makes
+ sense when bit 0x20 is set, indicating a read.
+
+What any other bits might mean, or how to get the slave's ACK/NACK
+response to a write, is unknown.
+*/
struct m9206_state {
u16 filters[M9206_MAX_FILTERS];
int filtering_enabled;
int rep_count;
- struct {
- unsigned char addr;
- unsigned char magic;
- }i2c_r[M9206_I2C_MAX];
};
#endif
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
new file mode 100644
index 000000000000..518d7ad217df
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -0,0 +1,581 @@
+/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card
+*
+* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org)
+* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de)
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the Free
+* Software Foundation, version 2.
+*
+* see Documentation/dvb/README.dvb-usb for more information
+*/
+
+#include "opera1.h"
+#include "stv0299.h"
+
+#define OPERA_READ_MSG 0
+#define OPERA_WRITE_MSG 1
+#define OPERA_I2C_TUNER 0xd1
+
+#define READ_FX2_REG_REQ 0xba
+#define READ_MAC_ADDR 0x08
+#define OPERA_WRITE_FX2 0xbb
+#define OPERA_TUNER_REQ 0xb1
+#define REG_1F_SYMBOLRATE_BYTE0 0x1f
+#define REG_20_SYMBOLRATE_BYTE1 0x20
+#define REG_21_SYMBOLRATE_BYTE2 0x21
+
+#define ADDR_B600_VOLTAGE_13V (0x02)
+#define ADDR_B601_VOLTAGE_18V (0x03)
+#define ADDR_B1A6_STREAM_CTRL (0x04)
+#define ADDR_B880_READ_REMOTE (0x05)
+
+struct opera1_state {
+ u32 last_key_pressed;
+};
+struct opera_rc_keys {
+ u32 keycode;
+ u32 event;
+};
+
+int dvb_usb_opera1_debug;
+module_param_named(debug, dvb_usb_opera1_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+ "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))."
+ DVB_USB_DEBUG_STATUS);
+
+static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value,
+ u8 * data, u16 len, int flags)
+{
+ int ret;
+ u8 r;
+ u8 u8buf[len];
+
+ unsigned int pipe = (flags == OPERA_READ_MSG) ?
+ usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0);
+ u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
+
+ if (flags == OPERA_WRITE_MSG)
+ memcpy(u8buf, data, len);
+ ret =
+ usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR,
+ value, 0x0, u8buf, len, 2000);
+
+ if (request == OPERA_TUNER_REQ) {
+ if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR,
+ 0x01, 0x0, &r, 1, 2000)<1 || r!=0x08)
+ return 0;
+ }
+ if (flags == OPERA_READ_MSG)
+ memcpy(data, u8buf, len);
+ return ret;
+}
+
+/* I2C */
+
+static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr,
+ u8 * buf, u16 len)
+{
+ int ret = 0;
+ u8 request;
+ u16 value;
+
+ if (!dev) {
+ info("no usb_device");
+ return -EINVAL;
+ }
+ if (mutex_lock_interruptible(&dev->usb_mutex) < 0)
+ return -EAGAIN;
+
+ switch (addr>>1){
+ case ADDR_B600_VOLTAGE_13V:
+ request=0xb6;
+ value=0x00;
+ break;
+ case ADDR_B601_VOLTAGE_18V:
+ request=0xb6;
+ value=0x01;
+ break;
+ case ADDR_B1A6_STREAM_CTRL:
+ request=0xb1;
+ value=0xa6;
+ break;
+ case ADDR_B880_READ_REMOTE:
+ request=0xb8;
+ value=0x80;
+ break;
+ default:
+ request=0xb1;
+ value=addr;
+ }
+ ret = opera1_xilinx_rw(dev->udev, request,
+ value, buf, len,
+ addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG);
+
+ mutex_unlock(&dev->usb_mutex);
+ return ret;
+}
+
+static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ int i = 0, tmp = 0;
+
+ if (!d)
+ return -ENODEV;
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ for (i = 0; i < num; i++) {
+ if ((tmp = opera1_usb_i2c_msgxfer(d,
+ (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
+ msg[i].buf,
+ msg[i].len
+ )!= msg[i].len)) {
+ break;
+ }
+ if (dvb_usb_opera1_debug & 0x10)
+ info("sending i2c mesage %d %d", tmp, msg[i].len);
+ }
+ mutex_unlock(&d->i2c_mutex);
+ return num;
+}
+
+static u32 opera1_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm opera1_i2c_algo = {
+ .master_xfer = opera1_i2c_xfer,
+ .functionality = opera1_i2c_func,
+};
+
+static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ static u8 command_13v[1]={0x00};
+ static u8 command_18v[1]={0x01};
+ struct i2c_msg msg[] = {
+ {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1},
+ };
+ struct dvb_usb_adapter *udev_adap =
+ (struct dvb_usb_adapter *)(fe->dvb->priv);
+ if (voltage == SEC_VOLTAGE_18) {
+ msg[0].addr = ADDR_B601_VOLTAGE_18V;
+ msg[0].buf = command_18v;
+ }
+ i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+ return 0;
+}
+
+static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate,
+ u32 ratio)
+{
+ stv0299_writereg(fe, 0x13, 0x98);
+ stv0299_writereg(fe, 0x14, 0x95);
+ stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff);
+ stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff);
+ stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0);
+ return 0;
+
+}
+static u8 opera1_inittab[] = {
+ 0x00, 0xa1,
+ 0x01, 0x15,
+ 0x02, 0x00,
+ 0x03, 0x00,
+ 0x04, 0x7d,
+ 0x05, 0x05,
+ 0x06, 0x02,
+ 0x07, 0x00,
+ 0x0b, 0x00,
+ 0x0c, 0x01,
+ 0x0d, 0x81,
+ 0x0e, 0x44,
+ 0x0f, 0x19,
+ 0x10, 0x3f,
+ 0x11, 0x84,
+ 0x12, 0xda,
+ 0x13, 0x98,
+ 0x14, 0x95,
+ 0x15, 0xc9,
+ 0x16, 0xeb,
+ 0x17, 0x00,
+ 0x18, 0x19,
+ 0x19, 0x8b,
+ 0x1a, 0x00,
+ 0x1b, 0x82,
+ 0x1c, 0x7f,
+ 0x1d, 0x00,
+ 0x1e, 0x00,
+ REG_1F_SYMBOLRATE_BYTE0, 0x06,
+ REG_20_SYMBOLRATE_BYTE1, 0x50,
+ REG_21_SYMBOLRATE_BYTE2, 0x10,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x37,
+ 0x25, 0xbc,
+ 0x26, 0x00,
+ 0x27, 0x00,
+ 0x28, 0x00,
+ 0x29, 0x1e,
+ 0x2a, 0x14,
+ 0x2b, 0x1f,
+ 0x2c, 0x09,
+ 0x2d, 0x0a,
+ 0x2e, 0x00,
+ 0x2f, 0x00,
+ 0x30, 0x00,
+ 0x31, 0x1f,
+ 0x32, 0x19,
+ 0x33, 0xfc,
+ 0x34, 0x13,
+ 0xff, 0xff,
+};
+
+static struct stv0299_config opera1_stv0299_config = {
+ .demod_address = 0xd0>>1,
+ .min_delay_ms = 100,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .skip_reinit = 0,
+ .lock_output = STV0229_LOCKOUTPUT_0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .inittab = opera1_inittab,
+ .set_symbol_rate = opera1_stv0299_set_symbol_rate,
+};
+
+static int opera1_frontend_attach(struct dvb_usb_adapter *d)
+{
+ if ((d->fe =
+ dvb_attach(stv0299_attach, &opera1_stv0299_config,
+ &d->dev->i2c_adap)) != NULL) {
+ d->fe->ops.set_voltage = opera1_set_voltage;
+ return 0;
+ }
+ info("not attached stv0299");
+ return -EIO;
+}
+
+static int opera1_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ dvb_attach(
+ dvb_pll_attach, adap->fe, 0xc0>>1,
+ &adap->dev->i2c_adap, &dvb_pll_opera1
+ );
+ return 0;
+}
+
+static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 val = onoff ? 0x01 : 0x00;
+
+ if (dvb_usb_opera1_debug)
+ info("power %s", onoff ? "on" : "off");
+ return opera1_xilinx_rw(d->udev, 0xb7, val,
+ &val, 1, OPERA_WRITE_MSG);
+}
+
+static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ static u8 buf_start[2] = { 0xff, 0x03 };
+ static u8 buf_stop[2] = { 0xff, 0x00 };
+ struct i2c_msg start_tuner[] = {
+ {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2},
+ };
+ if (dvb_usb_opera1_debug)
+ info("streaming %s", onoff ? "on" : "off");
+ i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1);
+ return 0;
+}
+
+static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+ int onoff)
+{
+ u8 b_pid[3];
+ struct i2c_msg msg[] = {
+ {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
+ };
+ if (dvb_usb_opera1_debug)
+ info("pidfilter index: %d pid: %d %s", index, pid,
+ onoff ? "on" : "off");
+ b_pid[0] = (2 * index) + 4;
+ b_pid[1] = onoff ? (pid & 0xff) : (0x00);
+ b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00);
+ i2c_transfer(&adap->dev->i2c_adap, msg, 1);
+ return 0;
+}
+
+static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
+{
+ int u = 0x04;
+ u8 b_pid[3];
+ struct i2c_msg msg[] = {
+ {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3},
+ };
+ if (dvb_usb_opera1_debug)
+ info("%s hw-pidfilter", onoff ? "enable" : "disable");
+ for (; u < 0x7e; u += 2) {
+ b_pid[0] = u;
+ b_pid[1] = 0;
+ b_pid[2] = 0x80;
+ i2c_transfer(&adap->dev->i2c_adap, msg, 1);
+ }
+ return 0;
+}
+
+static struct dvb_usb_rc_key opera1_rc_keys[] = {
+ {0x5f, 0xa0, KEY_1},
+ {0x51, 0xaf, KEY_2},
+ {0x5d, 0xa2, KEY_3},
+ {0x41, 0xbe, KEY_4},
+ {0x0b, 0xf5, KEY_5},
+ {0x43, 0xbd, KEY_6},
+ {0x47, 0xb8, KEY_7},
+ {0x49, 0xb6, KEY_8},
+ {0x05, 0xfa, KEY_9},
+ {0x45, 0xba, KEY_0},
+ {0x09, 0xf6, KEY_UP}, /*chanup */
+ {0x1b, 0xe5, KEY_DOWN}, /*chandown */
+ {0x5d, 0xa3, KEY_LEFT}, /*voldown */
+ {0x5f, 0xa1, KEY_RIGHT}, /*volup */
+ {0x07, 0xf8, KEY_SPACE}, /*tab */
+ {0x1f, 0xe1, KEY_ENTER}, /*play ok */
+ {0x1b, 0xe4, KEY_Z}, /*zoom */
+ {0x59, 0xa6, KEY_M}, /*mute */
+ {0x5b, 0xa5, KEY_F}, /*tv/f */
+ {0x19, 0xe7, KEY_R}, /*rec */
+ {0x01, 0xfe, KEY_S}, /*Stop */
+ {0x03, 0xfd, KEY_P}, /*pause */
+ {0x03, 0xfc, KEY_W}, /*<- -> */
+ {0x07, 0xf9, KEY_C}, /*capture */
+ {0x47, 0xb9, KEY_Q}, /*exit */
+ {0x43, 0xbc, KEY_O}, /*power */
+
+};
+
+static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
+{
+ struct opera1_state *opst = dev->priv;
+ u8 rcbuffer[32];
+ const u16 startmarker1 = 0x10ed;
+ const u16 startmarker2 = 0x11ec;
+ struct i2c_msg read_remote[] = {
+ {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32},
+ };
+ int i = 0;
+ u32 send_key = 0;
+
+ if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) {
+ for (i = 0; i < 32; i++) {
+ if (rcbuffer[i])
+ send_key |= 1;
+ if (i < 31)
+ send_key = send_key << 1;
+ }
+ if (send_key & 0x8000)
+ send_key = (send_key << 1) | (send_key >> 15 & 0x01);
+
+ if (send_key == 0xffff && opst->last_key_pressed != 0) {
+ *state = REMOTE_KEY_REPEAT;
+ *event = opst->last_key_pressed;
+ return 0;
+ }
+ for (; send_key != 0;) {
+ if (send_key >> 16 == startmarker2) {
+ break;
+ } else if (send_key >> 16 == startmarker1) {
+ send_key =
+ (send_key & 0xfffeffff) | (startmarker1 << 16);
+ break;
+ } else
+ send_key >>= 1;
+ }
+
+ if (send_key == 0)
+ return 0;
+
+ send_key = (send_key & 0xffff) | 0x0100;
+
+ for (i = 0; i < ARRAY_SIZE(opera1_rc_keys); i++) {
+ if ((opera1_rc_keys[i].custom * 256 +
+ opera1_rc_keys[i].data) == (send_key & 0xffff)) {
+ *state = REMOTE_KEY_PRESSED;
+ *event = opera1_rc_keys[i].event;
+ opst->last_key_pressed =
+ opera1_rc_keys[i].event;
+ break;
+ }
+ opst->last_key_pressed = 0;
+ }
+ } else
+ *state = REMOTE_NO_KEY_PRESSED;
+ return 0;
+}
+
+static struct usb_device_id opera1_table[] = {
+ {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)},
+ {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, opera1_table);
+
+static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
+{
+ u8 command[] = { READ_MAC_ADDR };
+ opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG);
+ opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG);
+ return 0;
+}
+static int opera1_xilinx_load_firmware(struct usb_device *dev,
+ const char *filename)
+{
+ const struct firmware *fw = NULL;
+ u8 *b, *p;
+ int ret = 0, i;
+ u8 testval;
+ info("start downloading fpga firmware");
+
+ if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
+ err("did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+ filename);
+ return ret;
+ } else {
+ p = kmalloc(fw->size, GFP_KERNEL);
+ opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG);
+ if (p != NULL && testval != 0x67) {
+
+ u8 reset = 0, fpga_command = 0;
+ memcpy(p, fw->data, fw->size);
+ /* clear fpga ? */
+ opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1,
+ OPERA_WRITE_MSG);
+ for (i = 0; p[i] != 0 && i < fw->size;) {
+ b = (u8 *) p + i;
+ if (opera1_xilinx_rw
+ (dev, OPERA_WRITE_FX2, 0x0, b + 1, b[0],
+ OPERA_WRITE_MSG) != b[0]
+ ) {
+ err("error while transferring firmware");
+ ret = -EINVAL;
+ break;
+ }
+ i = i + 1 + b[0];
+ }
+ /* restart the CPU */
+ if (ret || opera1_xilinx_rw
+ (dev, 0xa0, 0xe600, &reset, 1,
+ OPERA_WRITE_MSG) != 1) {
+ err("could not restart the USB controller CPU.");
+ ret = -EINVAL;
+ }
+ kfree(p);
+ }
+ }
+ if (fw) {
+ release_firmware(fw);
+ }
+ return ret;
+}
+
+static struct dvb_usb_device_properties opera1_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-opera-01.fw",
+ .size_of_priv = sizeof(struct opera1_state),
+
+ .power_ctrl = opera1_power_ctrl,
+ .i2c_algo = &opera1_i2c_algo,
+
+ .rc_key_map = opera1_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(opera1_rc_keys),
+ .rc_interval = 200,
+ .rc_query = opera1_rc_query,
+ .read_mac_address = opera1_read_mac_address,
+ .generic_bulk_ctrl_endpoint = 0x00,
+ /* parameter for the MPEG2-data transfer */
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .frontend_attach = opera1_frontend_attach,
+ .streaming_ctrl = opera1_streaming_ctrl,
+ .tuner_attach = opera1_tuner_attach,
+ .caps =
+ DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter = opera1_pid_filter,
+ .pid_filter_ctrl = opera1_pid_filter_control,
+ .pid_filter_count = 252,
+ .stream = {
+ .type = USB_BULK,
+ .count = 10,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ }
+ },
+ .num_device_descs = 1,
+ .devices = {
+ {"Opera1 DVB-S USB2.0",
+ {&opera1_table[0], NULL},
+ {&opera1_table[1], NULL},
+ },
+ }
+};
+
+static int opera1_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct dvb_usb_device *d;
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM &&
+ udev->descriptor.idVendor == USB_VID_OPERA1 &&
+ (d == NULL
+ || opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga.fw") != 0)
+ ) {
+ return -EINVAL;
+ }
+
+ if (dvb_usb_device_init(intf, &opera1_properties, THIS_MODULE, &d) != 0)
+ return -EINVAL;
+ return 0;
+}
+
+static struct usb_driver opera1_driver = {
+ .name = "opera1",
+ .probe = opera1_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = opera1_table,
+};
+
+static int __init opera1_module_init(void)
+{
+ int result = 0;
+ if ((result = usb_register(&opera1_driver))) {
+ err("usb_register failed. Error number %d", result);
+ }
+ return result;
+}
+
+static void __exit opera1_module_exit(void)
+{
+ usb_deregister(&opera1_driver);
+}
+
+module_init(opera1_module_init);
+module_exit(opera1_module_exit);
+
+MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org");
+MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de");
+MODULE_DESCRIPTION("Driver for Opera1 DVB-S device");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/opera1.h b/drivers/media/dvb/dvb-usb/opera1.h
new file mode 100644
index 000000000000..53174427902d
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/opera1.h
@@ -0,0 +1,9 @@
+#ifndef _OPERA1_H_
+#define _OPERA1_H_
+
+#define DVB_USB_LOG_PREFIX "opera"
+#include "dvb-usb.h"
+
+extern int dvb_usb_opera1_debug;
+#define deb_xfer(args...) dprintk(dvb_usb_opera1_debug,0x02,args)
+#endif
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
index 95d29976ed78..88dc4367a2e3 100644
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -184,6 +184,7 @@ static int ttusb2_probe(struct usb_interface *intf,
static struct usb_device_id ttusb2_table [] = {
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
+ { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, ttusb2_table);
@@ -227,12 +228,16 @@ static struct dvb_usb_device_properties ttusb2_properties = {
.generic_bulk_ctrl_endpoint = 0x01,
- .num_device_descs = 1,
+ .num_device_descs = 2,
.devices = {
{ "Pinnacle 400e DVB-S USB2.0",
{ &ttusb2_table[0], NULL },
{ NULL },
},
+ { "Pinnacle 450e DVB-S USB2.0",
+ { &ttusb2_table[1], NULL },
+ { NULL },
+ },
}
};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.