diff options
Diffstat (limited to 'drivers/media/dvb/ttpci/budget.c')
| -rw-r--r-- | drivers/media/dvb/ttpci/budget.c | 250 |
1 files changed, 3 insertions, 247 deletions
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 238c77b52f89..c23c02d95641 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -41,6 +41,8 @@ #include "l64781.h" #include "tda8083.h" #include "s5h1420.h" +#include "lnbp21.h" +#include "bsru6.h" static void Set22K (struct budget *budget, int state) { @@ -184,64 +186,6 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m return 0; } -static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u8 buf; - struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) }; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - switch(voltage) { - case SEC_VOLTAGE_13: - buf = (buf & 0xf7) | 0x04; - break; - - case SEC_VOLTAGE_18: - buf = (buf & 0xf7) | 0x0c; - break; - - case SEC_VOLTAGE_OFF: - buf = buf & 0xf0; - break; - } - - msg.flags = 0; - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - return 0; -} - -static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, long arg) -{ - struct budget* budget = (struct budget*) fe->dvb->priv; - u8 buf; - struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) }; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - if (arg) { - buf = buf | 0x10; - } else { - buf = buf & 0xef; - } - - msg.flags = 0; - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; - - return 0; -} - -static int lnbp21_init(struct budget* budget) -{ - u8 buf = 0x00; - struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) }; - - if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; -} - static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct budget* budget = (struct budget*) fe->dvb->priv; @@ -277,176 +221,6 @@ static struct ves1x93_config alps_bsrv2_config = .pll_set = alps_bsrv2_pll_set, }; -static u8 alps_bsru6_inittab[] = { - 0x01, 0x15, - 0x02, 0x00, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x52, - 0xff, 0xff -}; - -static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - - if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } - else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } - else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } - else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } - else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } - else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } - - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); - - return 0; -} - -static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params) -{ - u8 data[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL; - - div = (params->frequency + (125 - 1)) / 125; // round correctly - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - data[3] = 0xC4; - - if (params->frequency > 1530000) data[3] = 0xc0; - - if (i2c_transfer(i2c, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct stv0299_config alps_bsru6_config = { - - .demod_address = 0x68, - .inittab = alps_bsru6_inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = alps_bsru6_set_symbol_rate, - .pll_set = alps_bsru6_pll_set, -}; - -static u8 alps_bsbe1_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ - 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ - 0x06, 0x40, /* DAC not used, set to high impendance mode */ - 0x07, 0x00, /* DAC LSB */ - 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ - 0x09, 0x00, /* FIFO */ - 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ - 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ - 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ - 0x10, 0x3f, // AGC2 0x3d - 0x11, 0x84, - 0x12, 0xb9, - 0x15, 0xc9, // lock detector threshold - 0x16, 0x00, - 0x17, 0x00, - 0x18, 0x00, - 0x19, 0x00, - 0x1a, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 - 0x29, 0x1e, // 1/2 threshold - 0x2a, 0x14, // 2/3 threshold - 0x2b, 0x0f, // 3/4 threshold - 0x2c, 0x09, // 5/6 threshold - 0x2d, 0x05, // 7/8 threshold - 0x2e, 0x01, - 0x31, 0x1f, // test all FECs - 0x32, 0x19, // viterbi and synchro search - 0x33, 0xfc, // rs control - 0x34, 0x93, // error control - 0x0f, 0x92, // 0x80 = inverse AGC - 0xff, 0xff -}; - -static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params) -{ - int ret; - u8 data[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; - - if ((params->frequency < 950000) || (params->frequency > 2150000)) - return -EINVAL; - - div = (params->frequency + (125 - 1)) / 125; // round correctly - data[0] = (div >> 8) & 0x7f; - data[1] = div & 0xff; - data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; - data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; - - ret = i2c_transfer(i2c, &msg, 1); - return (ret != 1) ? -EIO : 0; -} - -static struct stv0299_config alps_bsbe1_config = { - .demod_address = 0x68, - .inittab = alps_bsbe1_inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .min_delay_ms = 100, - .set_symbol_rate = alps_bsru6_set_symbol_rate, - .pll_set = alps_bsbe1_pll_set, -}; - static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct budget* budget = (struct budget*) fe->dvb->priv; @@ -580,20 +354,6 @@ static u8 read_pwm(struct budget* budget) static void frontend_init(struct budget *budget) { switch(budget->dev->pci->subsystem_device) { - case 0x1017: - // try the ALPS BSBE1 now - budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap); - if (budget->dvb_frontend) { - budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; - budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; - budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL; - if (lnbp21_init(budget)) { - printk("%s: No LNBP21 found!\n", __FUNCTION__); - goto error_out; - } - } - - break; case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) case 0x1013: // try the ALPS BSRV2 first of all @@ -646,9 +406,7 @@ static void frontend_init(struct budget *budget) case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap); if (budget->dvb_frontend) { - budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; - budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; - if (lnbp21_init(budget)) { + if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) { printk("%s: No LNBP21 found!\n", __FUNCTION__); goto error_out; } @@ -719,7 +477,6 @@ static int budget_detach (struct saa7146_dev* dev) static struct saa7146_extension budget_extension; -MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT); MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); @@ -732,7 +489,6 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), - MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), |