1 files changed, 35 insertions, 21 deletions

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 3a0fe8cc64e9..48646a7f3fb0 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -291,8 +291,12 @@ static void tvp5150_selmux(struct v4l2_subdev *sd)
 	tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
 	tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
 
-	/* Svideo should enable YCrCb output and disable GPCL output
-	 * For Composite and TV, it should be the reverse
+	/*
+	 * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For
+	 * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK
+	 * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the
+	 * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set
+	 * INTREQ/GPCL/VBLK to logic 1.
 	 */
 	val = tvp5150_read(sd, TVP5150_MISC_CTL);
 	if (val < 0) {
@@ -301,9 +305,9 @@ static void tvp5150_selmux(struct v4l2_subdev *sd)
 	}
 
 	if (decoder->input == TVP5150_SVIDEO)
-		val = (val & ~0x40) | 0x10;
+		val = (val & ~TVP5150_MISC_CTL_GPCL) | TVP5150_MISC_CTL_HVLK;
 	else
-		val = (val & ~0x10) | 0x40;
+		val = (val & ~TVP5150_MISC_CTL_HVLK) | TVP5150_MISC_CTL_GPCL;
 	tvp5150_write(sd, TVP5150_MISC_CTL, val);
 };
 
@@ -455,7 +459,12 @@ static const struct i2c_reg_value tvp5150_init_enable[] = {
 	},{	/* Automatic offset and AGC enabled */
 		TVP5150_ANAL_CHL_CTL, 0x15
 	},{	/* Activate YCrCb output 0x9 or 0xd ? */
-		TVP5150_MISC_CTL, 0x6f
+		TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
+				  TVP5150_MISC_CTL_INTREQ_OE |
+				  TVP5150_MISC_CTL_YCBCR_OE |
+				  TVP5150_MISC_CTL_SYNC_OE |
+				  TVP5150_MISC_CTL_VBLANK |
+				  TVP5150_MISC_CTL_CLOCK_OE,
 	},{	/* Activates video std autodetection for all standards */
 		TVP5150_AUTOSW_MSK, 0x0
 	},{	/* Default format: 0x47. For 4:2:2: 0x40 */
@@ -861,8 +870,6 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
 
 	f = &format->format;
 
-	tvp5150_reset(sd, 0);
-
 	f->width = decoder->rect.width;
 	f->height = decoder->rect.height / 2;
 
@@ -1051,21 +1058,27 @@ static const struct media_entity_operations tvp5150_sd_media_ops = {
 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
-	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
-	int val = 0x09;
-
-	/* Output format: 8-bit 4:2:2 YUV with discrete sync */
-	if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
-		val = 0x0d;
+	int val;
 
-	/* Initializes TVP5150 to its default values */
-	/* # set PCLK (27MHz) */
-	tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
+	/* Enable or disable the video output signals. */
+	val = tvp5150_read(sd, TVP5150_MISC_CTL);
+	if (val < 0)
+		return val;
+
+	val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
+		 TVP5150_MISC_CTL_CLOCK_OE);
+
+	if (enable) {
+		/*
+		 * Enable the YCbCr and clock outputs. In discrete sync mode
+		 * (non-BT.656) additionally enable the the sync outputs.
+		 */
+		val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
+		if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
+			val |= TVP5150_MISC_CTL_SYNC_OE;
+	}
 
-	if (enable)
-		tvp5150_write(sd, TVP5150_MISC_CTL, val);
-	else
-		tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);
+	tvp5150_write(sd, TVP5150_MISC_CTL, val);
 
 	return 0;
 }
@@ -1524,7 +1537,6 @@ static int tvp5150_probe(struct i2c_client *c,
 		res = core->hdl.error;
 		goto err;
 	}
-	v4l2_ctrl_handler_setup(&core->hdl);
 
 	/* Default is no cropping */
 	core->rect.top = 0;
@@ -1535,6 +1547,8 @@ static int tvp5150_probe(struct i2c_client *c,
 	core->rect.left = 0;
 	core->rect.width = TVP5150_H_MAX;
 
+	tvp5150_reset(sd, 0);	/* Calls v4l2_ctrl_handler_setup() */
+
 	res = v4l2_async_register_subdev(sd);
 	if (res < 0)
 		goto err;