1 files changed, 225 insertions, 0 deletions
diff --git a/drivers/media/pci/cx18/cx18-av-firmware.c b/drivers/media/pci/cx18/cx18-av-firmware.c
new file mode 100644
index 000000000000..a34fd082b76e
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-av-firmware.c
@@ -0,0 +1,225 @@
+/*
+ *  cx18 ADEC firmware functions
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include "cx18-driver.h"
+#include "cx18-io.h"
+#include <linux/firmware.h>
+
+#define CX18_AUDIO_ENABLE    0xc72014
+#define CX18_AI1_MUX_MASK    0x30
+#define CX18_AI1_MUX_I2S1    0x00
+#define CX18_AI1_MUX_I2S2    0x10
+#define CX18_AI1_MUX_843_I2S 0x20
+#define CX18_AI1_MUX_INVALID 0x30
+
+#define FWFILE "v4l-cx23418-dig.fw"
+
+static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw)
+{
+	struct v4l2_subdev *sd = &cx->av_state.sd;
+	int ret = 0;
+	const u8 *data;
+	u32 size;
+	int addr;
+	u32 expected, dl_control;
+
+	/* Ensure we put the 8051 in reset and enable firmware upload mode */
+	dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	do {
+		dl_control &= 0x00ffffff;
+		dl_control |= 0x0f000000;
+		cx18_av_write4_noretry(cx, CXADEC_DL_CTL, dl_control);
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	} while ((dl_control & 0xff000000) != 0x0f000000);
+
+	/* Read and auto increment until at address 0x0000 */
+	while (dl_control & 0x3fff)
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+
+	data = fw->data;
+	size = fw->size;
+	for (addr = 0; addr < size; addr++) {
+		dl_control &= 0xffff3fff; /* ignore top 2 bits of address */
+		expected = 0x0f000000 | ((u32)data[addr] << 16) | addr;
+		if (expected != dl_control) {
+			CX18_ERR_DEV(sd, "verification of %s firmware load "
+				     "failed: expected %#010x got %#010x\n",
+				     FWFILE, expected, dl_control);
+			ret = -EIO;
+			break;
+		}
+		dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
+	}
+	if (ret == 0)
+		CX18_INFO_DEV(sd, "verified load of %s firmware (%d bytes)\n",
+			      FWFILE, size);
+	return ret;
+}
+
+int cx18_av_loadfw(struct cx18 *cx)
+{
+	struct v4l2_subdev *sd = &cx->av_state.sd;
+	const struct firmware *fw = NULL;
+	u32 size;
+	u32 u, v;
+	const u8 *ptr;
+	int i;
+	int retries1 = 0;
+
+	if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) {
+		CX18_ERR_DEV(sd, "unable to open firmware %s\n", FWFILE);
+		return -EINVAL;
+	}
+
+	/* The firmware load often has byte errors, so allow for several
+	   retries, both at byte level and at the firmware load level. */
+	while (retries1 < 5) {
+		cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000,
+					  0x00008430, 0xffffffff); /* cx25843 */
+		cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff);
+
+		/* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */
+		cx18_av_write4_expect(cx, 0x8100, 0x00010000,
+					  0x00008430, 0xffffffff); /* cx25843 */
+
+		/* Put the 8051 in reset and enable firmware upload */
+		cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000);
+
+		ptr = fw->data;
+		size = fw->size;
+
+		for (i = 0; i < size; i++) {
+			u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
+			u32 value = 0;
+			int retries2;
+			int unrec_err = 0;
+
+			for (retries2 = 0; retries2 < CX18_MAX_MMIO_WR_RETRIES;
+			     retries2++) {
+				cx18_av_write4_noretry(cx, CXADEC_DL_CTL,
+						       dl_control);
+				udelay(10);
+				value = cx18_av_read4(cx, CXADEC_DL_CTL);
+				if (value == dl_control)
+					break;
+				/* Check if we can correct the byte by changing
+				   the address.  We can only write the lower
+				   address byte of the address. */
+				if ((value & 0x3F00) != (dl_control & 0x3F00)) {
+					unrec_err = 1;
+					break;
+				}
+			}
+			if (unrec_err || retries2 >= CX18_MAX_MMIO_WR_RETRIES)
+				break;
+		}
+		if (i == size)
+			break;
+		retries1++;
+	}
+	if (retries1 >= 5) {
+		CX18_ERR_DEV(sd, "unable to load firmware %s\n", FWFILE);
+		release_firmware(fw);
+		return -EIO;
+	}
+
+	cx18_av_write4_expect(cx, CXADEC_DL_CTL,
+				0x03000000 | fw->size, 0x03000000, 0x13000000);
+
+	CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size);
+
+	if (cx18_av_verifyfw(cx, fw) == 0)
+		cx18_av_write4_expect(cx, CXADEC_DL_CTL,
+				0x13000000 | fw->size, 0x13000000, 0x13000000);
+
+	/* Output to the 416 */
+	cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000);
+
+	/* Audio input control 1 set to Sony mode */
+	/* Audio output input 2 is 0 for slave operation input */
+	/* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
+	/* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
+	   after WS transition for first bit of audio word. */
+	cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0);
+
+	/* Audio output control 1 is set to Sony mode */
+	/* Audio output control 2 is set to 1 for master mode */
+	/* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
+	/* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
+	   after WS transition for first bit of audio word. */
+	/* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT
+	   are generated) */
+	cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0);
+
+	/* set alt I2s master clock to /0x16 and enable alt divider i2s
+	   passthrough */
+	cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5600B687);
+
+	cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6,
+								  0x3F00FFFF);
+	/* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */
+
+	/* Set bit 0 in register 0x9CC to signify that this is MiniMe. */
+	/* Register 0x09CC is defined by the Merlin firmware, and doesn't
+	   have a name in the spec. */
+	cx18_av_write4(cx, 0x09CC, 1);
+
+	v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+	/* If bit 11 is 1, clear bit 10 */
+	if (v & 0x800)
+		cx18_write_reg_expect(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE,
+				      0, 0x400);
+
+	/* Toggle the AI1 MUX */
+	v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+	u = v & CX18_AI1_MUX_MASK;
+	v &= ~CX18_AI1_MUX_MASK;
+	if (u == CX18_AI1_MUX_843_I2S || u == CX18_AI1_MUX_INVALID) {
+		/* Switch to I2S1 */
+		v |= CX18_AI1_MUX_I2S1;
+		cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+				      v, CX18_AI1_MUX_MASK);
+		/* Switch back to the A/V decoder core I2S output */
+		v = (v & ~CX18_AI1_MUX_MASK) | CX18_AI1_MUX_843_I2S;
+	} else {
+		/* Switch to the A/V decoder core I2S output */
+		v |= CX18_AI1_MUX_843_I2S;
+		cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+				      v, CX18_AI1_MUX_MASK);
+		/* Switch back to I2S1 or I2S2 */
+		v = (v & ~CX18_AI1_MUX_MASK) | u;
+	}
+	cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
+			      v, CX18_AI1_MUX_MASK);
+
+	/* Enable WW auto audio standard detection */
+	v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
+	v |= 0xFF;   /* Auto by default */
+	v |= 0x400;  /* Stereo by default */
+	v |= 0x14000000;
+	cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF);
+
+	release_firmware(fw);
+	return 0;
+}
+
+MODULE_FIRMWARE(FWFILE);