diff options
Diffstat (limited to 'drivers/media/pci/ttpci/av7110.c')
| -rw-r--r-- | drivers/media/pci/ttpci/av7110.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/media/pci/ttpci/av7110.c b/drivers/media/pci/ttpci/av7110.c index 409defc75c05..9345287ad963 100644 --- a/drivers/media/pci/ttpci/av7110.c +++ b/drivers/media/pci/ttpci/av7110.c @@ -2313,7 +2313,7 @@ static int frontend_init(struct av7110 *av7110) * (n in defined in the RPS_THRESH1 counter threshold) * I think HS is raised high on the beginning of the n-th line * and remains high until this n-th line that triggered - * it is completely received. When the receiption of n-th line + * it is completely received. When the reception of n-th line * ends, HS is lowered. * * To transmit data over DMA, 7146 needs changing state at @@ -2347,7 +2347,7 @@ static int frontend_init(struct av7110 *av7110) * hardware debug note: a working budget card (including budget patch) * with vpeirq() interrupt setup in mode "0x90" (every 64K) will * generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes - * and that means 3*25=75 Hz of interrupt freqency, as seen by + * and that means 3*25=75 Hz of interrupt frequency, as seen by * watch cat /proc/interrupts * * If this frequency is 3x lower (and data received in the DMA @@ -2356,7 +2356,7 @@ static int frontend_init(struct av7110 *av7110) * this means VSYNC line is not connected in the hardware. * (check soldering pcb and pins) * The same behaviour of missing VSYNC can be duplicated on budget - * cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. + * cards, by setting DD1_INIT trigger mode 7 in 3rd nibble. */ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext) |