diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/media/pci/zoran/zoran_device.c (renamed from drivers/staging/media/zoran/zoran_device.c) | 37 |
1 files changed, 20 insertions, 17 deletions
diff --git a/drivers/staging/media/zoran/zoran_device.c b/drivers/media/pci/zoran/zoran_device.c index 2470889a58fa..31f049b55529 100644 --- a/drivers/staging/media/zoran/zoran_device.c +++ b/drivers/media/pci/zoran/zoran_device.c @@ -50,7 +50,6 @@ static bool lml33dpath; /* default = 0 module_param(lml33dpath, bool, 0644); MODULE_PARM_DESC(lml33dpath, "Use digital path capture mode (on LML33 cards)"); -int zr_set_buf(struct zoran *zr); /* * initialize video front end */ @@ -108,7 +107,6 @@ int post_office_wait(struct zoran *zr) { u32 por; -// while (((por = btread(ZR36057_POR)) & (ZR36057_POR_PO_PEN | ZR36057_POR_PO_TIME)) == ZR36057_POR_PO_PEN) { while ((por = btread(ZR36057_POR)) & ZR36057_POR_PO_PEN) { /* wait for something to happen */ /* TODO add timeout */ @@ -155,10 +153,12 @@ void jpeg_codec_sleep(struct zoran *zr, int sleep) { GPIO(zr, zr->card.gpio[ZR_GPIO_JPEG_SLEEP], !sleep); if (!sleep) { - pci_dbg(zr->pci_dev, "%s() - wake GPIO=0x%08x\n", __func__, btread(ZR36057_GPPGCR1)); - udelay(500); + pci_dbg(zr->pci_dev, "%s() - wake GPIO=0x%08x\n", + __func__, btread(ZR36057_GPPGCR1)); + usleep_range(500, 1000); } else { - pci_dbg(zr->pci_dev, "%s() - sleep GPIO=0x%08x\n", __func__, btread(ZR36057_GPPGCR1)); + pci_dbg(zr->pci_dev, "%s() - sleep GPIO=0x%08x\n", + __func__, btread(ZR36057_GPPGCR1)); udelay(2); } } @@ -284,7 +284,8 @@ static void zr36057_set_vfe(struct zoran *zr, int video_width, int video_height, vcrop1 = (tvn->ha / 2 - he) / 2; vcrop2 = tvn->ha / 2 - he - vcrop1; v_start = tvn->v_start; - v_end = v_start + tvn->ha / 2; // - 1; FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP + // FIXME SnapShot times out with -1 in 768*576 on the DC10 - LP + v_end = v_start + tvn->ha / 2; // - 1; v_start += vcrop1; v_end -= vcrop2; reg = ((v_start & ZR36057_VFEVCR_VMASK) << ZR36057_VFEVCR_V_START) @@ -298,10 +299,12 @@ static void zr36057_set_vfe(struct zoran *zr, int video_width, int video_height, reg |= (hor_dcm << ZR36057_VFESPFR_HOR_DCM); reg |= (ver_dcm << ZR36057_VFESPFR_VER_DCM); reg |= (disp_mode << ZR36057_VFESPFR_DISP_MODE); - /* RJ: I don't know, why the following has to be the opposite + /* + * RJ: I don't know, why the following has to be the opposite * of the corresponding ZR36060 setting, but only this way - * we get the correct colors when uncompressing to the screen */ - //reg |= ZR36057_VFESPFR_VCLK_POL; /**/ + * we get the correct colors when uncompressing to the screen + */ + //reg |= ZR36057_VFESPFR_VCLK_POL; /* RJ: Don't know if that is needed for NTSC also */ if (!(zr->norm & V4L2_STD_NTSC)) reg |= ZR36057_VFESPFR_EXT_FL; // NEEDED!!!!!!! Wolfgang @@ -342,7 +345,7 @@ void zr36057_set_memgrab(struct zoran *zr, int mode) * will be stuck at 1 until capturing is turned back on. */ if (btread(ZR36057_VSSFGR) & ZR36057_VSSFGR_SNAP_SHOT) - pci_warn(zr->pci_dev, "zr36057_set_memgrab(1) with SnapShot on!?\n"); + pci_warn(zr->pci_dev, "%s(1) with SnapShot on!?\n", __func__); /* switch on VSync interrupts */ btwrite(IRQ_MASK, ZR36057_ISR); // Clear Interrupts @@ -595,11 +598,9 @@ void jpeg_start(struct zoran *zr) /* enable the Go generation */ btor(ZR36057_JMC_GO_EN, ZR36057_JMC); - udelay(30); + usleep_range(30, 100); set_frame(zr, 1); // /FRAME - - pci_dbg(zr->pci_dev, "jpeg_start\n"); } void zr36057_enable_jpg(struct zoran *zr, enum zoran_codec_mode mode) @@ -803,8 +804,10 @@ static void zoran_reap_stat_com(struct zoran *zr) unsigned int size = 0; u32 fcnt; - /* In motion decompress we don't have a hardware frame counter, - * we just count the interrupts here */ + /* + * In motion decompress we don't have a hardware frame counter, + * we just count the interrupts here + */ if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) zr->jpg_seq_num++; @@ -938,9 +941,9 @@ void zoran_init_hardware(struct zoran *zr) void zr36057_restart(struct zoran *zr) { btwrite(0, ZR36057_SPGPPCR); - udelay(1000); + usleep_range(1000, 2000); btor(ZR36057_SPGPPCR_SOFT_RESET, ZR36057_SPGPPCR); - udelay(1000); + usleep_range(1000, 2000); /* assert P_Reset */ btwrite(0, ZR36057_JPC); |