diff options
Diffstat (limited to 'drivers/media/platform/marvell-ccic/mmp-driver.c')
-rw-r--r-- | drivers/media/platform/marvell-ccic/mmp-driver.c | 152 |
1 files changed, 16 insertions, 136 deletions
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index 92061e4adbfd..450693e6657d 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -20,9 +20,7 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/io.h> -#include <linux/delay.h> #include <linux/list.h> #include <linux/pm.h> #include <linux/clk.h> @@ -36,7 +34,6 @@ MODULE_LICENSE("GPL"); static char *mcam_clks[] = {"axi", "func", "phy"}; struct mmp_camera { - void __iomem *power_regs; struct platform_device *pdev; struct mcam_camera mcam; struct list_head devlist; @@ -92,94 +89,6 @@ static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev) return NULL; } - - - -/* - * Power-related registers; this almost certainly belongs - * somewhere else. - * - * ARMADA 610 register manual, sec 7.2.1, p1842. - */ -#define CPU_SUBSYS_PMU_BASE 0xd4282800 -#define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg */ -#define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg */ - -static void mcam_clk_enable(struct mcam_camera *mcam) -{ - unsigned int i; - - for (i = 0; i < NR_MCAM_CLK; i++) { - if (!IS_ERR(mcam->clk[i])) - clk_prepare_enable(mcam->clk[i]); - } -} - -static void mcam_clk_disable(struct mcam_camera *mcam) -{ - int i; - - for (i = NR_MCAM_CLK - 1; i >= 0; i--) { - if (!IS_ERR(mcam->clk[i])) - clk_disable_unprepare(mcam->clk[i]); - } -} - -/* - * Power control. - */ -static void mmpcam_power_up_ctlr(struct mmp_camera *cam) -{ - iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); - iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); - mdelay(1); -} - -static int mmpcam_power_up(struct mcam_camera *mcam) -{ - struct mmp_camera *cam = mcam_to_cam(mcam); - struct mmp_camera_platform_data *pdata; - -/* - * Turn on power and clocks to the controller. - */ - mmpcam_power_up_ctlr(cam); - mcam_clk_enable(mcam); -/* - * Provide power to the sensor. - */ - mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002); - pdata = cam->pdev->dev.platform_data; - gpio_set_value(pdata->sensor_power_gpio, 1); - mdelay(5); - mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000); - gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */ - mdelay(5); - gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ - mdelay(5); - - return 0; -} - -static void mmpcam_power_down(struct mcam_camera *mcam) -{ - struct mmp_camera *cam = mcam_to_cam(mcam); - struct mmp_camera_platform_data *pdata; -/* - * Turn off clocks and set reset lines - */ - iowrite32(0, cam->power_regs + REG_CCIC_DCGCR); - iowrite32(0, cam->power_regs + REG_CCIC_CRCR); -/* - * Shut down the sensor. - */ - pdata = cam->pdev->dev.platform_data; - gpio_set_value(pdata->sensor_power_gpio, 0); - gpio_set_value(pdata->sensor_reset_gpio, 0); - - mcam_clk_disable(mcam); -} - /* * calc the dphy register values * There are three dphy registers being used. @@ -325,8 +234,6 @@ static int mmpcam_probe(struct platform_device *pdev) INIT_LIST_HEAD(&cam->devlist); mcam = &cam->mcam; - mcam->plat_power_up = mmpcam_power_up; - mcam->plat_power_down = mmpcam_power_down; mcam->calc_dphy = mmpcam_calc_dphy; mcam->dev = &pdev->dev; pdata = pdev->dev.platform_data; @@ -364,33 +271,6 @@ static int mmpcam_probe(struct platform_device *pdev) if (IS_ERR(mcam->regs)) return PTR_ERR(mcam->regs); mcam->regs_size = resource_size(res); - /* - * Power/clock memory is elsewhere; get it too. Perhaps this - * should really be managed outside of this driver? - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - cam->power_regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(cam->power_regs)) - return PTR_ERR(cam->power_regs); - /* - * Sensor GPIO pins. - */ - ret = devm_gpio_request(&pdev->dev, pdata->sensor_power_gpio, - "cam-power"); - if (ret) { - dev_err(&pdev->dev, "Can't get sensor power gpio %d", - pdata->sensor_power_gpio); - return ret; - } - gpio_direction_output(pdata->sensor_power_gpio, 0); - ret = devm_gpio_request(&pdev->dev, pdata->sensor_reset_gpio, - "cam-reset"); - if (ret) { - dev_err(&pdev->dev, "Can't get sensor reset gpio %d", - pdata->sensor_reset_gpio); - return ret; - } - gpio_direction_output(pdata->sensor_reset_gpio, 0); mcam_init_clk(mcam); @@ -408,14 +288,21 @@ static int mmpcam_probe(struct platform_device *pdev) fwnode_handle_put(ep); /* - * Power the device up and hand it off to the core. + * Register the device with the core. */ - ret = mmpcam_power_up(mcam); - if (ret) - return ret; ret = mccic_register(mcam); if (ret) - goto out_power_down; + return ret; + + /* + * Add OF clock provider. + */ + ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, + mcam->mclk); + if (ret) { + dev_err(&pdev->dev, "can't add DT clock provider\n"); + goto out; + } /* * Finally, set up our IRQ now that the core is ready to @@ -424,7 +311,7 @@ static int mmpcam_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { ret = -ENODEV; - goto out_unregister; + goto out; } cam->irq = res->start; ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED, @@ -434,10 +321,10 @@ static int mmpcam_probe(struct platform_device *pdev) return 0; } -out_unregister: +out: + fwnode_handle_put(mcam->asd.match.fwnode); mccic_shutdown(mcam); -out_power_down: - mmpcam_power_down(mcam); + return ret; } @@ -448,7 +335,6 @@ static int mmpcam_remove(struct mmp_camera *cam) mmpcam_remove_device(cam); mccic_shutdown(mcam); - mmpcam_power_down(mcam); return 0; } @@ -480,12 +366,6 @@ static int mmpcam_resume(struct platform_device *pdev) { struct mmp_camera *cam = mmpcam_find_device(pdev); - /* - * Power up unconditionally just in case the core tries to - * touch a register even if nothing was active before; trust - * me, it's better this way. - */ - mmpcam_power_up_ctlr(cam); return mccic_resume(&cam->mcam); } |