diff options
Diffstat (limited to 'drivers/media/rc/Kconfig')
| -rw-r--r-- | drivers/media/rc/Kconfig | 80 |
1 files changed, 40 insertions, 40 deletions
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 96ce3e5524e0..3fc6ac15c66d 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -2,7 +2,7 @@ menuconfig RC_CORE tristate "Remote Controller support" depends on INPUT - ---help--- + help Enable support for Remote Controllers on Linux. This is needed in order to support several video capture adapters, standalone IR receivers/transmitters, and RF receivers. @@ -19,7 +19,7 @@ source "drivers/media/rc/keymaps/Kconfig" config LIRC bool "LIRC user interface" depends on RC_CORE - ---help--- + help Enable this option to enable the Linux Infrared Remote Control user interface (e.g. /dev/lirc*). This interface passes raw IR to and from userspace, which is needed for @@ -48,7 +48,7 @@ config IR_NEC_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with NEC protocol, and if the IR is decoded in software @@ -57,7 +57,7 @@ config IR_RC5_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with RC-5 protocol, and if the IR is decoded in software @@ -66,7 +66,7 @@ config IR_RC6_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the RC6 protocol, and you need software decoding support. @@ -75,7 +75,7 @@ config IR_JVC_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the JVC protocol, and you need software decoding support. @@ -84,7 +84,7 @@ config IR_SONY_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sony protocol, and you need software decoding support. @@ -92,7 +92,7 @@ config IR_SANYO_DECODER tristate "Enable IR raw decoder for the Sanyo protocol" depends on RC_CORE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), and you need software decoding support. @@ -101,7 +101,7 @@ config IR_SHARP_DECODER tristate "Enable IR raw decoder for the Sharp protocol" depends on RC_CORE - ---help--- + help Enable this option if you have an infrared remote control which uses the Sharp protocol (Sharp, Denon), and you need software decoding support. @@ -111,7 +111,7 @@ config IR_MCE_KBD_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have a Microsoft Remote Keyboard for Windows Media Center Edition, which you would like to use with a raw IR receiver in your system. @@ -121,14 +121,14 @@ config IR_XMP_DECODER depends on RC_CORE select BITREVERSE - ---help--- + help Enable this option if you have IR with XMP protocol, and if the IR is decoded in software config IR_IMON_DECODER tristate "Enable IR raw decoder for the iMON protocol" depends on RC_CORE - ---help--- + help Enable this option if you have iMON PAD or Antec Veris infrared remote control and you would like to use it with a raw IR receiver, or if you wish to use an encoder to transmit this IR. @@ -177,7 +177,7 @@ config IR_ENE tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receiver /transceiver made by ENE. @@ -203,7 +203,7 @@ config IR_IMON depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) IR Receiver and/or LCD/VFD/VGA display. @@ -215,7 +215,7 @@ config IR_IMON_RAW depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a SoundGraph iMON IR Receiver, early raw models. @@ -227,7 +227,7 @@ config IR_MCEUSB depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a Windows Media Center Edition eHome Infrared Transceiver. @@ -238,7 +238,7 @@ config IR_ITE_CIR tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receivers /transceivers made by ITE Tech Inc. These are found in several ASUS devices, like the ASUS Digimatrix or the ASUS @@ -251,7 +251,7 @@ config IR_FINTEK tristate "Fintek Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receiver /transceiver made by Fintek. This chip is found on assorted Jetway motherboards (and of course, possibly others). @@ -263,7 +263,7 @@ config IR_MESON tristate "Amlogic Meson IR remote receiver" depends on RC_CORE depends on ARCH_MESON || COMPILE_TEST - ---help--- + help Say Y if you want to use the IR remote receiver available on Amlogic Meson SoCs. @@ -274,7 +274,7 @@ config IR_MTK tristate "Mediatek IR remote receiver" depends on RC_CORE depends on ARCH_MEDIATEK || COMPILE_TEST - ---help--- + help Say Y if you want to use the IR remote receiver available on Mediatek SoCs. @@ -285,7 +285,7 @@ config IR_NUVOTON tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" depends on PNP || COMPILE_TEST depends on RC_CORE - ---help--- + help Say Y here to enable support for integrated infrared receiver /transceiver made by Nuvoton (formerly Winbond). This chip is found in the ASRock ION 330HT, as well as assorted Intel @@ -301,7 +301,7 @@ config IR_REDRAT3 select NEW_LEDS select LEDS_CLASS select USB - ---help--- + help Say Y here if you want to use a RedRat3 Infrared Transceiver. To compile this driver as a module, choose M here: the @@ -311,7 +311,7 @@ config IR_SPI tristate "SPI connected IR LED" depends on SPI && LIRC depends on OF || COMPILE_TEST - ---help--- + help Say Y if you want to use an IR LED connected through SPI bus. To compile this driver as a module, choose M here: the module will be @@ -322,7 +322,7 @@ config IR_STREAMZAP depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use a Streamzap PC Remote Infrared Receiver. @@ -336,7 +336,7 @@ config IR_WINBOND_CIR select NEW_LEDS select LEDS_CLASS select BITREVERSE - ---help--- + help Say Y here if you want to use the IR remote functionality found in some Winbond SuperI/O chips. Currently only the WPCD376I chip is supported (included in some Intel Media series @@ -350,7 +350,7 @@ config IR_IGORPLUGUSB depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use the IgorPlug-USB IR Receiver by Igor Cesko. This device is included on the Fit-PC2. @@ -365,7 +365,7 @@ config IR_IGUANA depends on USB_ARCH_HAS_HCD depends on RC_CORE select USB - ---help--- + help Say Y here if you want to use the IguanaWorks USB IR Transceiver. Both infrared receive and send are supported. If you want to change the ID or the pin config, use the user space driver from @@ -383,7 +383,7 @@ config IR_TTUSBIR select USB select NEW_LEDS select LEDS_CLASS - ---help--- + help Say Y here if you want to use the TechnoTrend USB IR Receiver. The driver can control the led. @@ -393,7 +393,7 @@ config IR_TTUSBIR config IR_RX51 tristate "Nokia N900 IR transmitter diode" depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE - ---help--- + help Say Y or M here if you want to enable support for the IR transmitter diode built in the Nokia N900 (RX51) device. @@ -405,7 +405,7 @@ source "drivers/media/rc/img-ir/Kconfig" config RC_LOOPBACK tristate "Remote Control Loopback Driver" depends on RC_CORE - ---help--- + help Say Y here if you want support for the remote control loopback driver which allows TX data to be sent back as RX data. This is mostly useful for debugging purposes. @@ -419,7 +419,7 @@ config IR_GPIO_CIR tristate "GPIO IR remote control" depends on RC_CORE depends on (OF && GPIOLIB) || COMPILE_TEST - ---help--- + help Say Y if you want to use GPIO based IR Receiver. To compile this driver as a module, choose M here: the module will @@ -430,7 +430,7 @@ config IR_GPIO_TX depends on RC_CORE depends on LIRC depends on (OF && GPIOLIB) || COMPILE_TEST - ---help--- + help Say Y if you want to a GPIO based IR transmitter. This is a bit banging driver. @@ -443,7 +443,7 @@ config IR_PWM_TX depends on LIRC depends on PWM depends on OF || COMPILE_TEST - ---help--- + help Say Y if you want to use a PWM based IR transmitter. This is more power efficient than the bit banging gpio driver. @@ -454,7 +454,7 @@ config RC_ST tristate "ST remote control receiver" depends on RC_CORE depends on ARCH_STI || COMPILE_TEST - ---help--- + help Say Y here if you want support for ST remote control driver which allows both IR and UHF RX. The driver passes raw pulse and space information to the LIRC decoder. @@ -465,7 +465,7 @@ config IR_SUNXI tristate "SUNXI IR remote control" depends on RC_CORE depends on ARCH_SUNXI || COMPILE_TEST - ---help--- + help Say Y if you want to use sunXi internal IR Controller To compile this driver as a module, choose M here: the module will @@ -474,7 +474,7 @@ config IR_SUNXI config IR_SERIAL tristate "Homebrew Serial Port Receiver" depends on RC_CORE - ---help--- + help Say Y if you want to use Homebrew Serial Port Receivers and Transceivers. @@ -484,13 +484,13 @@ config IR_SERIAL config IR_SERIAL_TRANSMITTER bool "Serial Port Transmitter" depends on IR_SERIAL - ---help--- + help Serial Port Transmitter support config IR_SIR tristate "Built-in SIR IrDA port" depends on RC_CORE - ---help--- + help Say Y if you want to use a IrDA SIR port Transceivers. To compile this driver as a module, choose M here: the module will @@ -500,7 +500,7 @@ config IR_TANGO tristate "Sigma Designs SMP86xx IR decoder" depends on RC_CORE depends on ARCH_TANGO || COMPILE_TEST - ---help--- + help Adds support for the HW IR decoder embedded on Sigma Designs Tango-based systems (SMP86xx, SMP87xx). The HW decoder supports NEC, RC-5, RC-6 IR protocols. @@ -522,7 +522,7 @@ config IR_ZX tristate "ZTE ZX IR remote control" depends on RC_CORE depends on ARCH_ZX || COMPILE_TEST - ---help--- + help Say Y if you want to use the IR remote control available on ZTE ZX family SoCs. |