aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/em28xx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/em28xx')
-rw-r--r--drivers/media/usb/em28xx/Kconfig2
-rw-r--r--drivers/media/usb/em28xx/em28xx-cards.c88
-rw-r--r--drivers/media/usb/em28xx/em28xx-dvb.c185
-rw-r--r--drivers/media/usb/em28xx/em28xx-reg.h13
-rw-r--r--drivers/media/usb/em28xx/em28xx.h3
5 files changed, 291 insertions, 0 deletions
diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig
index e382210c4ada..d917b0a2beb1 100644
--- a/drivers/media/usb/em28xx/Kconfig
+++ b/drivers/media/usb/em28xx/Kconfig
@@ -59,6 +59,8 @@ config VIDEO_EM28XX_DVB
select DVB_DRX39XYJ if MEDIA_SUBDRV_AUTOSELECT
select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TC90522 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_QM1D1C0042 if MEDIA_SUBDRV_AUTOSELECT
---help---
This adds support for DVB cards based on the
Empiatech em28xx chips.
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index 930e3e3fc948..e397f544f108 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -492,6 +492,44 @@ static struct em28xx_reg_seq terratec_t2_stick_hd[] = {
{-1, -1, -1, -1},
};
+static struct em28xx_reg_seq plex_px_bcud[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
+ {0x0d, 0xff, 0xff, 0},
+ {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
+ {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100},
+ {EM28XX_R12_VINENABLE, 0x20, 0x20, 0},
+ {0x0d, 0x42, 0xff, 1000},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
+ {0x73, 0xfd, 0xff, 100},
+ {-1, -1, -1, -1},
+};
+
+/*
+ * 2040:0265 Hauppauge WinTV-dualHD DVB
+ * reg 0x80/0x84:
+ * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
+ * GPIO_1: Green LED tuner 1, 0=on, 1=off
+ * GPIO_2: Yellow LED tuner 2, 0=on, 1=off
+ * GPIO_3: Green LED tuner 2, 0=on, 1=off
+ * GPIO_5: Reset #2, 0=active
+ * GPIO_6: Reset #1, 0=active
+ */
+static struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
+ {0x0d, 0xff, 0xff, 200},
+ {0x50, 0x04, 0xff, 300},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
+ {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50},
+ {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
+ {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
+ {-1, -1, -1, -1},
+};
+
/*
* Button definitions
*/
@@ -571,6 +609,22 @@ static struct em28xx_led terratec_grabby_leds[] = {
{-1, 0, 0, 0},
};
+static struct em28xx_led hauppauge_dualhd_leds[] = {
+ {
+ .role = EM28XX_LED_DIGITAL_CAPTURING,
+ .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
+ .gpio_mask = EM_GPIO_1,
+ .inverted = 1,
+ },
+ {
+ .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
+ .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
+ .gpio_mask = EM_GPIO_3,
+ .inverted = 1,
+ },
+ {-1, 0, 0, 0},
+};
+
/*
* Board definitions
*/
@@ -2306,6 +2360,35 @@ struct em28xx_board em28xx_boards[] = {
.has_dvb = 1,
.ir_codes = RC_MAP_TERRATEC_SLIM_2,
},
+
+ /*
+ * 3275:0085 PLEX PX-BCUD.
+ * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042
+ */
+ [EM28178_BOARD_PLEX_PX_BCUD] = {
+ .name = "PLEX PX-BCUD",
+ .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ,
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = plex_px_bcud,
+ .has_dvb = 1,
+ },
+ /*
+ * 2040:0265 Hauppauge WinTV-dualHD (DVB version).
+ * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
+ */
+ [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
+ .name = "Hauppauge WinTV-dualHD DVB",
+ .def_i2c_bus = 1,
+ .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+ EM28XX_I2C_FREQ_400_KHZ,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = hauppauge_dualhd_dvb,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_HAUPPAUGE,
+ .leds = hauppauge_dualhd_leds,
+ },
};
EXPORT_SYMBOL_GPL(em28xx_boards);
@@ -2429,6 +2512,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x651f),
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
+ { USB_DEVICE(0x2040, 0x0265),
+ .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
{ USB_DEVICE(0x0438, 0xb002),
.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
{ USB_DEVICE(0x2001, 0xf112),
@@ -2495,6 +2580,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2861_BOARD_LEADTEK_VC100 },
{ USB_DEVICE(0xeb1a, 0x8179),
.driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
+ { USB_DEVICE(0x3275, 0x0085),
+ .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
@@ -2861,6 +2948,7 @@ static void em28xx_card_setup(struct em28xx *dev)
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
+ case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
{
struct tveeprom tv;
diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 5d209c7c54d5..1a5c01202f73 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -58,6 +58,8 @@
#include "ts2020.h"
#include "si2168.h"
#include "si2157.h"
+#include "tc90522.h"
+#include "qm1d1c0042.h"
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
MODULE_LICENSE("GPL");
@@ -787,6 +789,68 @@ static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe)
return 0;
}
+static void px_bcud_init(struct em28xx *dev)
+{
+ int i;
+ struct {
+ unsigned char r[4];
+ int len;
+ } regs1[] = {
+ {{ 0x0e, 0x77 }, 2},
+ {{ 0x0f, 0x77 }, 2},
+ {{ 0x03, 0x90 }, 2},
+ }, regs2[] = {
+ {{ 0x07, 0x01 }, 2},
+ {{ 0x08, 0x10 }, 2},
+ {{ 0x13, 0x00 }, 2},
+ {{ 0x17, 0x00 }, 2},
+ {{ 0x03, 0x01 }, 2},
+ {{ 0x10, 0xb1 }, 2},
+ {{ 0x11, 0x40 }, 2},
+ {{ 0x85, 0x7a }, 2},
+ {{ 0x87, 0x04 }, 2},
+ };
+ static struct em28xx_reg_seq gpio[] = {
+ {EM28XX_R06_I2C_CLK, 0x40, 0xff, 300},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 60},
+ {EM28XX_R15_RGAIN, 0x20, 0xff, 0},
+ {EM28XX_R16_GGAIN, 0x20, 0xff, 0},
+ {EM28XX_R17_BGAIN, 0x20, 0xff, 0},
+ {EM28XX_R18_ROFFSET, 0x00, 0xff, 0},
+ {EM28XX_R19_GOFFSET, 0x00, 0xff, 0},
+ {EM28XX_R1A_BOFFSET, 0x00, 0xff, 0},
+ {EM28XX_R23_UOFFSET, 0x00, 0xff, 0},
+ {EM28XX_R24_VOFFSET, 0x00, 0xff, 0},
+ {EM28XX_R26_COMPR, 0x00, 0xff, 0},
+ {0x13, 0x08, 0xff, 0},
+ {EM28XX_R12_VINENABLE, 0x27, 0xff, 0},
+ {EM28XX_R0C_USBSUSP, 0x10, 0xff, 0},
+ {EM28XX_R27_OUTFMT, 0x00, 0xff, 0},
+ {EM28XX_R10_VINMODE, 0x00, 0xff, 0},
+ {EM28XX_R11_VINCTRL, 0x11, 0xff, 0},
+ {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
+ {EM2874_R5F_TS_ENABLE, 0x80, 0xff, 0},
+ {EM28XX_R06_I2C_CLK, 0x46, 0xff, 0},
+ };
+ em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x46);
+ /* sleeping ISDB-T */
+ dev->dvb->i2c_client_demod->addr = 0x14;
+ for (i = 0; i < ARRAY_SIZE(regs1); i++)
+ i2c_master_send(dev->dvb->i2c_client_demod, regs1[i].r,
+ regs1[i].len);
+ /* sleeping ISDB-S */
+ dev->dvb->i2c_client_demod->addr = 0x15;
+ for (i = 0; i < ARRAY_SIZE(regs2); i++)
+ i2c_master_send(dev->dvb->i2c_client_demod, regs2[i].r,
+ regs2[i].len);
+ for (i = 0; i < ARRAY_SIZE(gpio); i++) {
+ em28xx_write_reg_bits(dev, gpio[i].reg, gpio[i].val,
+ gpio[i].mask);
+ if (gpio[i].sleep > 0)
+ msleep(gpio[i].sleep);
+ }
+};
+
static struct mt352_config terratec_xs_mt352_cfg = {
.demod_address = (0x1e >> 1),
.no_tuner = 1,
@@ -1762,6 +1826,127 @@ static int em28xx_dvb_init(struct em28xx *dev)
dvb->i2c_client_tuner = client;
}
break;
+
+ case EM28178_BOARD_PLEX_PX_BCUD:
+ {
+ struct i2c_client *client;
+ struct i2c_board_info info;
+ struct tc90522_config tc90522_config;
+ struct qm1d1c0042_config qm1d1c0042_config;
+
+ /* attach demod */
+ memset(&tc90522_config, 0, sizeof(tc90522_config));
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "tc90522sat", I2C_NAME_SIZE);
+ info.addr = 0x15;
+ info.platform_data = &tc90522_config;
+ request_module("tc90522");
+ client = i2c_new_device(&dev->i2c_adap[dev->def_i2c_bus], &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ result = -ENODEV;
+ goto out_free;
+ }
+ dvb->i2c_client_demod = client;
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ /* attach tuner */
+ memset(&qm1d1c0042_config, 0,
+ sizeof(qm1d1c0042_config));
+ qm1d1c0042_config.fe = tc90522_config.fe;
+ qm1d1c0042_config.lpf = 1;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "qm1d1c0042", I2C_NAME_SIZE);
+ info.addr = 0x61;
+ info.platform_data = &qm1d1c0042_config;
+ request_module(info.type);
+ client = i2c_new_device(tc90522_config.tuner_i2c,
+ &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+ dvb->i2c_client_tuner = client;
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+ dvb->fe[0] = tc90522_config.fe;
+ px_bcud_init(dev);
+ }
+ break;
+ case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
+ {
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+ struct i2c_board_info info;
+ struct si2168_config si2168_config;
+ struct si2157_config si2157_config;
+
+ /* attach demod */
+ memset(&si2168_config, 0, sizeof(si2168_config));
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.fe = &dvb->fe[0];
+ si2168_config.ts_mode = SI2168_TS_SERIAL;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+ info.addr = 0x64;
+ info.platform_data = &si2168_config;
+ request_module(info.type);
+ client = i2c_new_device(&dev->i2c_adap[dev->def_i2c_bus], &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_demod = client;
+
+ /* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
+ si2157_config.fe = dvb->fe[0];
+ si2157_config.if_port = 1;
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+ si2157_config.mdev = dev->media_dev;
+#endif
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+ request_module(info.type);
+ client = i2c_new_device(adapter, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ i2c_unregister_device(client);
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_tuner = client;
+
+ }
+ break;
default:
em28xx_errdev("/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n");
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index 13cbb7f3ea10..afe7a66d7dc8 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -193,6 +193,19 @@
/* em2874 registers */
#define EM2874_R50_IR_CONFIG 0x50
#define EM2874_R51_IR 0x51
+#define EM2874_R5D_TS1_PKT_SIZE 0x5d
+#define EM2874_R5E_TS2_PKT_SIZE 0x5e
+ /*
+ * For both TS1 and TS2, In isochronous mode:
+ * 0x01 188 bytes
+ * 0x02 376 bytes
+ * 0x03 564 bytes
+ * 0x04 752 bytes
+ * 0x05 940 bytes
+ * In bulk mode:
+ * 0x01..0xff total packet count in 188-byte
+ */
+
#define EM2874_R5F_TS_ENABLE 0x5f
/* em2874/174/84, em25xx, em276x/7x/8x GPIO registers */
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index 267444961775..d148463b22c1 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -145,6 +145,8 @@
#define EM2861_BOARD_LEADTEK_VC100 95
#define EM28178_BOARD_TERRATEC_T2_STICK_HD 96
#define EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 97
+#define EM28178_BOARD_PLEX_PX_BCUD 98
+#define EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB 99
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -406,6 +408,7 @@ enum em28xx_adecoder {
enum em28xx_led_role {
EM28XX_LED_ANALOG_CAPTURING = 0,
EM28XX_LED_DIGITAL_CAPTURING,
+ EM28XX_LED_DIGITAL_CAPTURING_TS2,
EM28XX_LED_ILLUMINATION,
EM28XX_NUM_LED_ROLES, /* must be the last */
};
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.