diff options
Diffstat (limited to 'drivers/media/usb')
35 files changed, 856 insertions, 186 deletions
diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig index c9644b62f91a..b24e753c4766 100644 --- a/drivers/media/usb/Kconfig +++ b/drivers/media/usb/Kconfig @@ -63,6 +63,7 @@ endif if MEDIA_CEC_SUPPORT comment "USB HDMI CEC adapters" source "drivers/media/usb/pulse8-cec/Kconfig" +source "drivers/media/usb/rainshadow-cec/Kconfig" endif endif #MEDIA_USB_SUPPORT diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile index 0f15e3351ddc..738b993ec8b0 100644 --- a/drivers/media/usb/Makefile +++ b/drivers/media/usb/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_VIDEO_USBTV) += usbtv/ obj-$(CONFIG_VIDEO_GO7007) += go7007/ obj-$(CONFIG_DVB_AS102) += as102/ obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec/ +obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec/ diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index 313f659f0bfb..43bfa778b070 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -153,7 +153,7 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) { struct tveeprom tv; - tveeprom_hauppauge_analog(&dev->i2c_client, &tv, eeprom_data); + tveeprom_hauppauge_analog(&tv, eeprom_data); dev->board.tuner_type = tv.tuner_type; /* Make sure we support the board model */ diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 16f9125a985a..2a255bd32bb3 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -809,16 +809,9 @@ static void au0828_analog_stream_reset(struct au0828_dev *dev) */ static int au0828_stream_interrupt(struct au0828_dev *dev) { - int ret = 0; - dev->stream_state = STREAM_INTERRUPT; if (test_bit(DEV_DISCONNECTED, &dev->dev_state)) return -ENODEV; - else if (ret) { - set_bit(DEV_MISCONFIGURED, &dev->dev_state); - dprintk(1, "%s device is misconfigured!\n", __func__); - return ret; - } return 0; } diff --git a/drivers/media/usb/cx231xx/cx231xx-audio.c b/drivers/media/usb/cx231xx/cx231xx-audio.c index cf80842dfa08..a050d125934c 100644 --- a/drivers/media/usb/cx231xx/cx231xx-audio.c +++ b/drivers/media/usb/cx231xx/cx231xx-audio.c @@ -670,10 +670,8 @@ static int cx231xx_audio_init(struct cx231xx *dev) spin_lock_init(&adev->slock); err = snd_pcm_new(card, "Cx231xx Audio", 0, 0, 1, &pcm); - if (err < 0) { - snd_card_free(card); - return err; - } + if (err < 0) + goto err_free_card; snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx231xx_pcm_capture); @@ -687,10 +685,9 @@ static int cx231xx_audio_init(struct cx231xx *dev) INIT_WORK(&dev->wq_trigger, audio_trigger); err = snd_card_register(card); - if (err < 0) { - snd_card_free(card); - return err; - } + if (err < 0) + goto err_free_card; + adev->sndcard = card; adev->udev = dev->udev; @@ -700,6 +697,11 @@ static int cx231xx_audio_init(struct cx231xx *dev) hs_config_info[0].interface_info. audio_index + 1]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) { + err = -ENODEV; + goto err_free_card; + } + adev->end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc. bEndpointAddress; @@ -709,13 +711,20 @@ static int cx231xx_audio_init(struct cx231xx *dev) "audio EndPoint Addr 0x%x, Alternate settings: %i\n", adev->end_point_addr, adev->num_alt); adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL); - - if (adev->alt_max_pkt_size == NULL) - return -ENOMEM; + if (!adev->alt_max_pkt_size) { + err = -ENOMEM; + goto err_free_card; + } for (i = 0; i < adev->num_alt; i++) { - u16 tmp = - le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) { + err = -ENODEV; + goto err_free_pkt_size; + } + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc. wMaxPacketSize); adev->alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); @@ -725,6 +734,13 @@ static int cx231xx_audio_init(struct cx231xx *dev) } return 0; + +err_free_pkt_size: + kfree(adev->alt_max_pkt_size); +err_free_card: + snd_card_free(card); + + return err; } static int cx231xx_audio_fini(struct cx231xx *dev) diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index f730fdbc9156..a1007d005290 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -1165,8 +1165,7 @@ void cx231xx_card_setup(struct cx231xx *dev) e->client.addr = 0xa0 >> 1; read_eeprom(dev, &e->client, e->eeprom, sizeof(e->eeprom)); - tveeprom_hauppauge_analog(&e->client, - &e->tvee, e->eeprom + 0xc0); + tveeprom_hauppauge_analog(&e->tvee, e->eeprom + 0xc0); kfree(e); break; } @@ -1426,6 +1425,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress; dev->video_mode.num_alt = uif->num_altsetting; @@ -1439,7 +1441,12 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, return -ENOMEM; for (i = 0; i < dev->video_mode.num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize); + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize); dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); dev_dbg(dev->dev, "Alternate setting %i, max size= %i\n", i, @@ -1456,6 +1463,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, } uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + dev->vbi_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc. bEndpointAddress; @@ -1472,8 +1482,12 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, return -ENOMEM; for (i = 0; i < dev->vbi_mode.num_alt; i++) { - u16 tmp = - le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. desc.wMaxPacketSize); dev->vbi_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); @@ -1493,6 +1507,9 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, } uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + dev->sliced_cc_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc. bEndpointAddress; @@ -1507,7 +1524,12 @@ static int cx231xx_init_v4l2(struct cx231xx *dev, return -ENOMEM; for (i = 0; i < dev->sliced_cc_mode.num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) + return -ENODEV; + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe]. desc.wMaxPacketSize); dev->sliced_cc_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); @@ -1676,6 +1698,11 @@ static int cx231xx_usb_probe(struct usb_interface *interface, } uif = udev->actconfig->interface[idx]; + if (uif->altsetting[0].desc.bNumEndpoints < isoc_pipe + 1) { + retval = -ENODEV; + goto err_video_alt; + } + dev->ts1_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe]. desc.bEndpointAddress; @@ -1693,7 +1720,14 @@ static int cx231xx_usb_probe(struct usb_interface *interface, } for (i = 0; i < dev->ts1_mode.num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i]. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < isoc_pipe + 1) { + retval = -ENODEV; + goto err_video_alt; + } + + tmp = le16_to_cpu(uif->altsetting[i]. endpoint[isoc_pipe].desc. wMaxPacketSize); dev->ts1_mode.alt_max_pkt_size[i] = diff --git a/drivers/media/usb/cx231xx/cx231xx-i2c.c b/drivers/media/usb/cx231xx/cx231xx-i2c.c index 35e9acfe63d3..8d95b1154e12 100644 --- a/drivers/media/usb/cx231xx/cx231xx-i2c.c +++ b/drivers/media/usb/cx231xx/cx231xx-i2c.c @@ -491,20 +491,24 @@ void cx231xx_do_i2c_scan(struct cx231xx *dev, int i2c_port) { unsigned char buf; int i, rc; - struct i2c_client client; + struct i2c_adapter *adap; + struct i2c_msg msg = { + .flags = I2C_M_RD, + .len = 1, + .buf = &buf, + }; if (!i2c_scan) return; /* Don't generate I2C errors during scan */ dev->i2c_scan_running = true; - - memset(&client, 0, sizeof(client)); - client.adapter = cx231xx_get_i2c_adap(dev, i2c_port); + adap = cx231xx_get_i2c_adap(dev, i2c_port); for (i = 0; i < 128; i++) { - client.addr = i; - rc = i2c_master_recv(&client, &buf, 0); + msg.addr = i; + rc = i2c_transfer(adap, &msg, 1); + if (rc < 0) continue; dev_info(dev->dev, @@ -576,17 +580,10 @@ int cx231xx_i2c_mux_create(struct cx231xx *dev) int cx231xx_i2c_mux_register(struct cx231xx *dev, int mux_no) { - int rc; - - rc = i2c_mux_add_adapter(dev->muxc, - 0, - mux_no /* chan_id */, - 0 /* class */); - if (rc) - dev_warn(dev->dev, - "i2c mux %d register FAILED\n", mux_no); - - return rc; + return i2c_mux_add_adapter(dev->muxc, + 0, + mux_no /* chan_id */, + 0 /* class */); } void cx231xx_i2c_mux_unregister(struct cx231xx *dev) diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 80c635980526..abf69d8fa469 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -919,7 +919,12 @@ static int mxl111sf_init(struct dvb_usb_device *d) struct mxl111sf_state *state = d_to_priv(d); int ret; static u8 eeprom[256]; - struct i2c_client c; + u8 reg = 0; + struct i2c_msg msg[2] = { + { .addr = 0xa0 >> 1, .len = 1, .buf = ® }, + { .addr = 0xa0 >> 1, .flags = I2C_M_RD, + .len = sizeof(eeprom), .buf = eeprom }, + }; ret = get_chip_info(state); if (mxl_fail(ret)) @@ -930,14 +935,11 @@ static int mxl111sf_init(struct dvb_usb_device *d) if (state->chip_rev > MXL111SF_V6) mxl111sf_config_pin_mux_modes(state, PIN_MUX_TS_SPI_IN_MODE_1); - c.adapter = &d->i2c_adap; - c.addr = 0xa0 >> 1; - - ret = tveeprom_read(&c, eeprom, sizeof(eeprom)); + ret = i2c_transfer(&d->i2c_adap, msg, 2); if (mxl_fail(ret)) return 0; - tveeprom_hauppauge_analog(&c, &state->tv, (0x84 == eeprom[0xa0]) ? - eeprom + 0xa0 : eeprom + 0x80); + tveeprom_hauppauge_analog(&state->tv, (0x84 == eeprom[0xa0]) ? + eeprom + 0xa0 : eeprom + 0x80); #if 0 switch (state->tv.model) { case 117001: diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 51620e02292f..99a3f3625944 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -458,8 +458,8 @@ static int cxusb_rc_query(struct dvb_usb_device *d) cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4); if (ircode[2] || ircode[3]) - rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, - RC_SCANCODE_RC5(ircode[2], ircode[3]), 0); + rc_keydown(d->rc_dev, RC_TYPE_NEC, + RC_SCANCODE_NEC(~ircode[2] & 0xff, ircode[3]), 0); return 0; } @@ -473,8 +473,8 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d) return 0; if (ircode[1] || ircode[2]) - rc_keydown(d->rc_dev, RC_TYPE_UNKNOWN, - RC_SCANCODE_RC5(ircode[1], ircode[2]), 0); + rc_keydown(d->rc_dev, RC_TYPE_NEC, + RC_SCANCODE_NEC(~ircode[1] & 0xff, ircode[2]), 0); return 0; } @@ -1239,6 +1239,82 @@ static int cxusb_mygica_t230_frontend_attach(struct dvb_usb_adapter *adap) return 0; } +static int cxusb_mygica_t230c_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + struct cxusb_state *st = d->priv; + struct i2c_adapter *adapter; + struct i2c_client *client_demod; + struct i2c_client *client_tuner; + struct i2c_board_info info; + struct si2168_config si2168_config; + struct si2157_config si2157_config; + + /* Select required USB configuration */ + if (usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + + /* Unblock all USB pipes */ + usb_clear_halt(d->udev, + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint)); + + /* attach frontend */ + memset(&si2168_config, 0, sizeof(si2168_config)); + si2168_config.i2c_adapter = &adapter; + si2168_config.fe = &adap->fe_adap[0].fe; + si2168_config.ts_mode = SI2168_TS_PARALLEL; + si2168_config.ts_clock_inv = 1; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "si2168", I2C_NAME_SIZE); + info.addr = 0x64; + info.platform_data = &si2168_config; + request_module(info.type); + client_demod = i2c_new_device(&d->i2c_adap, &info); + if (client_demod == NULL || client_demod->dev.driver == NULL) + return -ENODEV; + + if (!try_module_get(client_demod->dev.driver->owner)) { + i2c_unregister_device(client_demod); + return -ENODEV; + } + + /* attach tuner */ + memset(&si2157_config, 0, sizeof(si2157_config)); + si2157_config.fe = adap->fe_adap[0].fe; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "si2141", I2C_NAME_SIZE); + info.addr = 0x60; + info.platform_data = &si2157_config; + request_module("si2157"); + client_tuner = i2c_new_device(adapter, &info); + if (client_tuner == NULL || client_tuner->dev.driver == NULL) { + module_put(client_demod->dev.driver->owner); + i2c_unregister_device(client_demod); + return -ENODEV; + } + if (!try_module_get(client_tuner->dev.driver->owner)) { + i2c_unregister_device(client_tuner); + module_put(client_demod->dev.driver->owner); + i2c_unregister_device(client_demod); + return -ENODEV; + } + + st->i2c_client_demod = client_demod; + st->i2c_client_tuner = client_tuner; + + /* hook fe: need to resync the slave fifo when signal locks. */ + mutex_init(&st->stream_mutex); + st->last_lock = 0; + st->fe_read_status = adap->fe_adap[0].fe->ops.read_status; + adap->fe_adap[0].fe->ops.read_status = cxusb_read_status; + + return 0; +} + /* * DViCO has shipped two devices with the same USB ID, but only one of them * needs a firmware download. Check the device class details to see if they @@ -1321,6 +1397,7 @@ static struct dvb_usb_device_properties cxusb_aver_a868r_properties; static struct dvb_usb_device_properties cxusb_d680_dmb_properties; static struct dvb_usb_device_properties cxusb_mygica_d689_properties; static struct dvb_usb_device_properties cxusb_mygica_t230_properties; +static struct dvb_usb_device_properties cxusb_mygica_t230c_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -1353,6 +1430,8 @@ static int cxusb_probe(struct usb_interface *intf, THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230c_properties, + THIS_MODULE, NULL, adapter_nr) || 0) return 0; @@ -1404,6 +1483,7 @@ enum cxusb_table_index { CONEXANT_D680_DMB, MYGICA_D689, MYGICA_T230, + MYGICA_T230C, NR__cxusb_table_index }; @@ -1471,6 +1551,9 @@ static struct usb_device_id cxusb_table[NR__cxusb_table_index + 1] = { [MYGICA_T230] = { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230) }, + [MYGICA_T230C] = { + USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230+1) + }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, cxusb_table); @@ -1563,7 +1646,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1620,7 +1703,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = { .rc_codes = RC_MAP_DVICO_MCE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1685,7 +1768,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1741,7 +1824,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .generic_bulk_ctrl_endpoint = 0x01, @@ -1796,7 +1879,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = { .rc_codes = RC_MAP_DVICO_MCE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_bluebird2_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -1850,7 +1933,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = { .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_bluebird2_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -1906,7 +1989,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope .rc_codes = RC_MAP_DVICO_PORTABLE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -2005,7 +2088,7 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { .rc_codes = RC_MAP_DVICO_MCE, .module_name = KBUILD_MODNAME, .rc_query = cxusb_rc_query, - .allowed_protos = RC_BIT_UNKNOWN, + .allowed_protos = RC_BIT_NEC, }, .num_device_descs = 1, @@ -2165,7 +2248,7 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties = { .rc.core = { .rc_interval = 100, - .rc_codes = RC_MAP_D680_DMB, + .rc_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02, .module_name = KBUILD_MODNAME, .rc_query = cxusb_d680_dmb_rc_query, .allowed_protos = RC_BIT_UNKNOWN, @@ -2181,6 +2264,60 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties = { } }; +static struct dvb_usb_device_properties cxusb_mygica_t230c_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_mygica_t230c_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + } }, + }, + }, + + .power_ctrl = cxusb_d680_dmb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.core = { + .rc_interval = 100, + .rc_codes = RC_MAP_TOTAL_MEDIA_IN_HAND_02, + .module_name = KBUILD_MODNAME, + .rc_query = cxusb_d680_dmb_rc_query, + .allowed_protos = RC_BIT_UNKNOWN, + }, + + .num_device_descs = 1, + .devices = { + { + "Mygica T230C DVB-T/T2/C", + { NULL }, + { &cxusb_table[MYGICA_T230C], NULL }, + }, + } +}; + static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb", .probe = cxusb_probe, diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index dd5edd3a17ee..08acdd32e412 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -809,6 +809,9 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf) /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */ + if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1) + return -ENODEV; + purb = usb_alloc_urb(0, GFP_KERNEL); if (purb == NULL) return -ENOMEM; diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c index c989cac9343d..0c2bc97436d5 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mc-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c @@ -11,6 +11,8 @@ #include "dibusb.h" +MODULE_LICENSE("GPL"); + /* 3000MC/P stuff */ // Config Adjacent channels Perf -cal22 static struct dibx000_agc_config dib3000p_mt2060_agc_config = { diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 4284f6984dc1..475a3c0cdee7 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -33,6 +33,9 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d, wo = (rbuf == NULL || rlen == 0); /* write-only */ + if (wlen > 4 || rlen > 4) + return -EIO; + memset(st->sndbuf, 0, 7); memset(st->rcvbuf, 0, 7); diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 4f42d57f81d9..6e654e5026dd 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -204,6 +204,20 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, switch (num) { case 2: + if (msg[0].len != 1) { + warn("i2c rd: len=%d is not 1!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + + if (2 + msg[1].len > sizeof(buf6)) { + warn("i2c rd: len=%d is too big!\n", + msg[1].len); + num = -EOPNOTSUPP; + break; + } + /* read si2109 register by number */ buf6[0] = msg[0].addr << 1; buf6[1] = msg[0].len; @@ -219,6 +233,13 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, case 1: switch (msg[0].addr) { case 0x68: + if (2 + msg[0].len > sizeof(buf6)) { + warn("i2c wr: len=%d is too big!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + /* write to si2109 register */ buf6[0] = msg[0].addr << 1; buf6[1] = msg[0].len; @@ -262,6 +283,13 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms /* first write first register number */ u8 ibuf[MAX_XFER_SIZE], obuf[3]; + if (2 + msg[0].len != sizeof(obuf)) { + warn("i2c rd: len=%d is not 1!\n", + msg[0].len); + ret = -EOPNOTSUPP; + goto unlock; + } + if (2 + msg[1].len > sizeof(ibuf)) { warn("i2c rd: len=%d is too big!\n", msg[1].len); @@ -462,6 +490,12 @@ static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], /* first write first register number */ u8 ibuf[MAX_XFER_SIZE], obuf[3]; + if (2 + msg[0].len != sizeof(obuf)) { + warn("i2c rd: len=%d is not 1!\n", + msg[0].len); + ret = -EOPNOTSUPP; + goto unlock; + } if (2 + msg[1].len > sizeof(ibuf)) { warn("i2c rd: len=%d is too big!\n", msg[1].len); @@ -696,6 +730,13 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], msg[0].buf[0] = state->data[1]; break; default: + if (3 + msg[0].len > sizeof(state->data)) { + warn("i2c wr: len=%d is too big!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + /* always i2c write*/ state->data[0] = 0x08; state->data[1] = msg[0].addr; @@ -711,6 +752,19 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], break; case 2: /* always i2c read */ + if (4 + msg[0].len > sizeof(state->data)) { + warn("i2c rd: len=%d is too big!\n", + msg[0].len); + num = -EOPNOTSUPP; + break; + } + if (1 + msg[1].len > sizeof(state->data)) { + warn("i2c rd: len=%d is too big!\n", + msg[1].len); + num = -EOPNOTSUPP; + break; + } + state->data[0] = 0x09; state->data[1] = msg[0].len; state->data[2] = msg[1].len; diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c index ecc207fbaf3c..9e0d6a4166d2 100644 --- a/drivers/media/usb/dvb-usb/ttusb2.c +++ b/drivers/media/usb/dvb-usb/ttusb2.c @@ -78,6 +78,9 @@ static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, u8 *s, *r = NULL; int ret = 0; + if (4 + rlen > 64) + return -EIO; + s = kzalloc(wlen+4, GFP_KERNEL); if (!s) return -ENOMEM; @@ -381,6 +384,22 @@ static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD); read = msg[i].flags & I2C_M_RD; + if (3 + msg[i].len > sizeof(obuf)) { + err("i2c wr len=%d too high", msg[i].len); + break; + } + if (write_read) { + if (3 + msg[i+1].len > sizeof(ibuf)) { + err("i2c rd len=%d too high", msg[i+1].len); + break; + } + } else if (read) { + if (3 + msg[i].len > sizeof(ibuf)) { + err("i2c rd len=%d too high", msg[i].len); + break; + } + } + obuf[0] = (msg[i].addr << 1) | (write_read | read); if (read) obuf[1] = 0; diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig index aa131cf9989b..4cc029f18aa8 100644 --- a/drivers/media/usb/em28xx/Kconfig +++ b/drivers/media/usb/em28xx/Kconfig @@ -12,7 +12,7 @@ config VIDEO_EM28XX_V4L2 select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT - + select VIDEO_OV2640 if MEDIA_SUBDRV_AUTOSELECT && MEDIA_CAMERA_SUPPORT ---help--- This is a video4linux driver for Empia 28xx based TV cards. @@ -39,6 +39,7 @@ config VIDEO_EM28XX_DVB depends on VIDEO_EM28XX && DVB_CORE select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT3306A if MEDIA_SUBDRV_AUTOSELECT select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT select DVB_S921 if MEDIA_SUBDRV_AUTOSELECT @@ -61,6 +62,10 @@ config VIDEO_EM28XX_DVB select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT select DVB_TC90522 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_QM1D1C0042 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT ---help--- This adds support for DVB cards based on the Empiatech em28xx chips. diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c index 89c890ba7dd6..ae87dd3e671f 100644 --- a/drivers/media/usb/em28xx/em28xx-camera.c +++ b/drivers/media/usb/em28xx/em28xx-camera.c @@ -23,9 +23,7 @@ #include <linux/i2c.h> #include <linux/usb.h> -#include <media/soc_camera.h> #include <media/i2c/mt9v011.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> /* Possible i2c addresses of Micron sensors */ @@ -43,13 +41,6 @@ static unsigned short omnivision_sensor_addrs[] = { I2C_CLIENT_END }; -static struct soc_camera_link camlink = { - .bus_id = 0, - .flags = 0, - .module_name = "em28xx", - .unbalanced_power = true, -}; - /* FIXME: Should be replaced by a proper mt9m111 driver */ static int em28xx_initialize_mt9m111(struct em28xx *dev) { @@ -106,55 +97,35 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) { int ret, i; char *name; - u8 reg; - __be16 id_be; u16 id; - struct i2c_client client = dev->i2c_client[dev->def_i2c_bus]; + struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus]; dev->em28xx_sensor = EM28XX_NOSENSOR; for (i = 0; micron_sensor_addrs[i] != I2C_CLIENT_END; i++) { - client.addr = micron_sensor_addrs[i]; - /* NOTE: i2c_smbus_read_word_data() doesn't work with BE data */ + client->addr = micron_sensor_addrs[i]; /* Read chip ID from register 0x00 */ - reg = 0x00; - ret = i2c_master_send(&client, ®, 1); + ret = i2c_smbus_read_word_data(client, 0x00); /* assumes LE */ if (ret < 0) { if (ret != -ENXIO) dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); - continue; - } - ret = i2c_master_recv(&client, (u8 *)&id_be, 2); - if (ret < 0) { - dev_err(&dev->intf->dev, - "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } - id = be16_to_cpu(id_be); + id = swab16(ret); /* LE -> BE */ /* Read chip ID from register 0xff */ - reg = 0xff; - ret = i2c_master_send(&client, ®, 1); + ret = i2c_smbus_read_word_data(client, 0xff); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); - continue; - } - ret = i2c_master_recv(&client, (u8 *)&id_be, 2); - if (ret < 0) { - dev_err(&dev->intf->dev, - "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } /* Validate chip ID to be sure we have a Micron device */ - if (id != be16_to_cpu(id_be)) + if (id != swab16(ret)) continue; /* Check chip ID */ - id = be16_to_cpu(id_be); switch (id) { case 0x1222: name = "MT9V012"; /* MI370 */ /* 640x480 */ @@ -197,7 +168,6 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev) dev_info(&dev->intf->dev, "sensor %s detected\n", name); - dev->i2c_client[dev->def_i2c_bus].addr = client.addr; return 0; } @@ -213,30 +183,30 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) char *name; u8 reg; u16 id; - struct i2c_client client = dev->i2c_client[dev->def_i2c_bus]; + struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus]; dev->em28xx_sensor = EM28XX_NOSENSOR; /* NOTE: these devices have the register auto incrementation disabled * by default, so we have to use single byte reads ! */ for (i = 0; omnivision_sensor_addrs[i] != I2C_CLIENT_END; i++) { - client.addr = omnivision_sensor_addrs[i]; + client->addr = omnivision_sensor_addrs[i]; /* Read manufacturer ID from registers 0x1c-0x1d (BE) */ reg = 0x1c; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { if (ret != -ENXIO) dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id = ret << 8; reg = 0x1d; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id += ret; @@ -245,20 +215,20 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) continue; /* Read product ID from registers 0x0a-0x0b (BE) */ reg = 0x0a; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id = ret << 8; reg = 0x0b; - ret = i2c_smbus_read_byte_data(&client, reg); + ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) { dev_err(&dev->intf->dev, "couldn't read from i2c device 0x%02x: error %i\n", - client.addr << 1, ret); + client->addr << 1, ret); continue; } id += ret; @@ -309,7 +279,6 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev) dev_info(&dev->intf->dev, "sensor %s detected\n", name); - dev->i2c_client[dev->def_i2c_bus].addr = client.addr; return 0; } @@ -341,17 +310,9 @@ int em28xx_detect_sensor(struct em28xx *dev) int em28xx_init_camera(struct em28xx *dev) { - char clk_name[V4L2_CLK_NAME_SIZE]; struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus]; struct i2c_adapter *adap = &dev->i2c_adap[dev->def_i2c_bus]; struct em28xx_v4l2 *v4l2 = dev->v4l2; - int ret = 0; - - v4l2_clk_name_i2c(clk_name, sizeof(clk_name), - i2c_adapter_id(adap), client->addr); - v4l2->clk = v4l2_clk_register_fixed(clk_name, -EINVAL); - if (IS_ERR(v4l2->clk)) - return PTR_ERR(v4l2->clk); switch (dev->em28xx_sensor) { case EM28XX_MT9V011: @@ -381,12 +342,9 @@ int em28xx_init_camera(struct em28xx *dev) pdata.xtal = v4l2->sensor_xtal; if (NULL == v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap, - &mt9v011_info, NULL)) { - ret = -ENODEV; - break; - } - /* probably means GRGB 16 bit bayer */ - v4l2->vinmode = 0x0d; + &mt9v011_info, NULL)) + return -ENODEV; + v4l2->vinmode = EM28XX_VINMODE_RGB8_GRBG; v4l2->vinctl = 0x00; break; @@ -397,8 +355,7 @@ int em28xx_init_camera(struct em28xx *dev) em28xx_initialize_mt9m001(dev); - /* probably means BGGR 16 bit bayer */ - v4l2->vinmode = 0x0c; + v4l2->vinmode = EM28XX_VINMODE_RGB8_BGGR; v4l2->vinctl = 0x00; break; @@ -410,7 +367,7 @@ int em28xx_init_camera(struct em28xx *dev) em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); em28xx_initialize_mt9m111(dev); - v4l2->vinmode = 0x0a; + v4l2->vinmode = EM28XX_VINMODE_YUV422_UYVY; v4l2->vinctl = 0x00; break; @@ -421,7 +378,6 @@ int em28xx_init_camera(struct em28xx *dev) .type = "ov2640", .flags = I2C_CLIENT_SCCB, .addr = client->addr, - .platform_data = &camlink, }; struct v4l2_subdev_format format = { .which = V4L2_SUBDEV_FORMAT_ACTIVE, @@ -441,10 +397,8 @@ int em28xx_init_camera(struct em28xx *dev) subdev = v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap, &ov2640_info, NULL); - if (NULL == subdev) { - ret = -ENODEV; - break; - } + if (subdev == NULL) + return -ENODEV; format.format.code = MEDIA_BUS_FMT_YUYV8_2X8; format.format.width = 640; @@ -454,21 +408,16 @@ int em28xx_init_camera(struct em28xx *dev) /* NOTE: for UXGA=1600x1200 switch to 12MHz */ dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ; em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); - v4l2->vinmode = 0x08; + v4l2->vinmode = EM28XX_VINMODE_YUV422_YUYV; v4l2->vinctl = 0x00; break; } case EM28XX_NOSENSOR: default: - ret = -EINVAL; + return -EINVAL; } - if (ret < 0) { - v4l2_clk_unregister_fixed(v4l2->clk); - v4l2->clk = NULL; - } - - return ret; + return 0; } EXPORT_SYMBOL_GPL(em28xx_init_camera); diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index 5f90d0899a45..a12b599a1fa2 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -2600,6 +2600,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, { USB_DEVICE(0x3275, 0x0085), .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, + { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ + .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2917,7 +2919,9 @@ static void em28xx_card_setup(struct em28xx *dev) * If sensor is not found, then it isn't a webcam. */ if (dev->board.is_webcam) { - if (em28xx_detect_sensor(dev) < 0) + em28xx_detect_sensor(dev); + if (dev->em28xx_sensor == EM28XX_NOSENSOR) + /* NOTE: error/unknown sensor/no sensor */ dev->board.is_webcam = 0; } @@ -2974,8 +2978,7 @@ static void em28xx_card_setup(struct em28xx *dev) #endif /* Call first TVeeprom */ - dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; - tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); + tveeprom_hauppauge_analog(&tv, dev->eedata); dev->tuner_type = tv.tuner_type; @@ -3666,9 +3669,11 @@ static int em28xx_usb_probe(struct usb_interface *interface, try_bulk = usb_xfer_mode > 0; } - /* Disable V4L2 if the device doesn't have a decoder */ + /* Disable V4L2 if the device doesn't have a decoder or image sensor */ if (has_video && - dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) { + dev->board.decoder == EM28XX_NODECODER && + dev->em28xx_sensor == EM28XX_NOSENSOR) { + dev_err(&interface->dev, "Currently, V4L2 is not supported on this model\n"); has_video = false; diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h index afe7a66d7dc8..747525ca7ed5 100644 --- a/drivers/media/usb/em28xx/em28xx-reg.h +++ b/drivers/media/usb/em28xx/em28xx-reg.h @@ -93,6 +93,24 @@ #define EM28XX_XCLK_FREQUENCY_24MHZ 0x0b #define EM28XX_R10_VINMODE 0x10 + /* used by all non-camera devices: */ +#define EM28XX_VINMODE_YUV422_CbYCrY 0x10 + /* used by camera devices: */ +#define EM28XX_VINMODE_YUV422_YUYV 0x08 +#define EM28XX_VINMODE_YUV422_YVYU 0x09 +#define EM28XX_VINMODE_YUV422_UYVY 0x0a +#define EM28XX_VINMODE_YUV422_VYUY 0x0b +#define EM28XX_VINMODE_RGB8_BGGR 0x0c +#define EM28XX_VINMODE_RGB8_GRBG 0x0d +#define EM28XX_VINMODE_RGB8_GBRG 0x0e +#define EM28XX_VINMODE_RGB8_RGGB 0x0f + /* + * apparently: + * bit 0: swap component 1+2 with 3+4 + * => e.g.: YUYV => YVYU, BGGR => GRBG + * bit 1: swap component 1 with 2 and 3 with 4 + * => e.g.: YUYV => UYVY, BGGR => GBRG + */ #define EM28XX_R11_VINCTRL 0x11 diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index 8d93100334ea..8d253a5df0a9 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -43,7 +43,6 @@ #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-event.h> -#include <media/v4l2-clk.h> #include <media/drv-intf/msp3400.h> #include <media/tuner.h> @@ -117,6 +116,11 @@ static struct em28xx_fmt format[] = { .depth = 16, .reg = EM28XX_OUTFMT_RGB_16_656, }, { + .name = "8 bpp Bayer RGRG..GBGB", + .fourcc = V4L2_PIX_FMT_SRGGB8, + .depth = 8, + .reg = EM28XX_OUTFMT_RGB_8_RGRG, + }, { .name = "8 bpp Bayer BGBG..GRGR", .fourcc = V4L2_PIX_FMT_SBGGR8, .depth = 8, @@ -2140,11 +2144,6 @@ static int em28xx_v4l2_fini(struct em28xx *dev) v4l2_ctrl_handler_free(&v4l2->ctrl_handler); v4l2_device_unregister(&v4l2->v4l2_dev); - if (v4l2->clk) { - v4l2_clk_unregister_fixed(v4l2->clk); - v4l2->clk = NULL; - } - kref_put(&v4l2->ref, em28xx_free_v4l2); mutex_unlock(&dev->lock); @@ -2465,7 +2464,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* * Default format, used for tvp5150 or saa711x output formats */ - v4l2->vinmode = 0x10; + v4l2->vinmode = EM28XX_VINMODE_YUV422_CbYCrY; v4l2->vinctl = EM28XX_VINCTRL_INTERLACED | EM28XX_VINCTRL_CCIR656_ENABLE; diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index e9f379959fa5..e8d97d5ec161 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -510,7 +510,6 @@ struct em28xx_v4l2 { struct v4l2_device v4l2_dev; struct v4l2_ctrl_handler ctrl_handler; - struct v4l2_clk *clk; struct video_device vdev; struct video_device vbi_dev; diff --git a/drivers/media/usb/go7007/go7007-v4l2.c b/drivers/media/usb/go7007/go7007-v4l2.c index 4eaba0c24629..ed5ec9773969 100644 --- a/drivers/media/usb/go7007/go7007-v4l2.c +++ b/drivers/media/usb/go7007/go7007-v4l2.c @@ -792,14 +792,13 @@ static int vidioc_subscribe_event(struct v4l2_fh *fh, { switch (sub->type) { - case V4L2_EVENT_CTRL: - return v4l2_ctrl_subscribe_event(fh, sub); case V4L2_EVENT_MOTION_DET: /* Allow for up to 30 events (1 second for NTSC) to be * stored. */ return v4l2_event_subscribe(fh, sub, 30, NULL); + default: + return v4l2_ctrl_subscribe_event(fh, sub); } - return -EINVAL; } diff --git a/drivers/media/usb/gspca/konica.c b/drivers/media/usb/gspca/konica.c index 71f273377f83..31b2117e8f1d 100644 --- a/drivers/media/usb/gspca/konica.c +++ b/drivers/media/usb/gspca/konica.c @@ -184,6 +184,9 @@ static int sd_start(struct gspca_dev *gspca_dev) return -EIO; } + if (alt->desc.bNumEndpoints < 2) + return -ENODEV; + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); n = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; diff --git a/drivers/media/usb/pulse8-cec/Kconfig b/drivers/media/usb/pulse8-cec/Kconfig index 6ffc407de62f..8937f3986a01 100644 --- a/drivers/media/usb/pulse8-cec/Kconfig +++ b/drivers/media/usb/pulse8-cec/Kconfig @@ -1,6 +1,6 @@ config USB_PULSE8_CEC tristate "Pulse Eight HDMI CEC" - depends on USB_ACM && MEDIA_CEC_SUPPORT + depends on USB_ACM && CEC_CORE select SERIO select SERIO_SERPORT ---help--- diff --git a/drivers/media/usb/pulse8-cec/pulse8-cec.c b/drivers/media/usb/pulse8-cec/pulse8-cec.c index 7c18daeb0ade..1dfc2de1fe77 100644 --- a/drivers/media/usb/pulse8-cec/pulse8-cec.c +++ b/drivers/media/usb/pulse8-cec/pulse8-cec.c @@ -461,7 +461,7 @@ static int pulse8_apply_persistent_config(struct pulse8 *pulse8, static int pulse8_cec_adap_enable(struct cec_adapter *adap, bool enable) { - struct pulse8 *pulse8 = adap->priv; + struct pulse8 *pulse8 = cec_get_drvdata(adap); u8 cmd[16]; int err; @@ -474,7 +474,7 @@ static int pulse8_cec_adap_enable(struct cec_adapter *adap, bool enable) static int pulse8_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) { - struct pulse8 *pulse8 = adap->priv; + struct pulse8 *pulse8 = cec_get_drvdata(adap); u16 mask = 0; u16 pa = adap->phys_addr; u8 cmd[16]; @@ -594,7 +594,7 @@ unlock: static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, u32 signal_free_time, struct cec_msg *msg) { - struct pulse8 *pulse8 = adap->priv; + struct pulse8 *pulse8 = cec_get_drvdata(adap); u8 cmd[2]; unsigned int i; int err; diff --git a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c index 4af2fb5c85d5..8b643d511a0b 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-eeprom.c @@ -118,15 +118,10 @@ int pvr2_eeprom_analyze(struct pvr2_hdw *hdw) memset(&tvdata,0,sizeof(tvdata)); eeprom = pvr2_eeprom_fetch(hdw); - if (!eeprom) return -EINVAL; - - { - struct i2c_client fake_client; - /* Newer version expects a useless client interface */ - fake_client.addr = hdw->eeprom_addr; - fake_client.adapter = &hdw->i2c_adap; - tveeprom_hauppauge_analog(&fake_client,&tvdata,eeprom); - } + if (!eeprom) + return -EINVAL; + + tveeprom_hauppauge_analog(&tvdata, eeprom); trace_eeprom("eeprom assumed v4l tveeprom module"); trace_eeprom("eeprom direct call results:"); diff --git a/drivers/media/usb/rainshadow-cec/Kconfig b/drivers/media/usb/rainshadow-cec/Kconfig new file mode 100644 index 000000000000..3eb86607efb8 --- /dev/null +++ b/drivers/media/usb/rainshadow-cec/Kconfig @@ -0,0 +1,10 @@ +config USB_RAINSHADOW_CEC + tristate "RainShadow Tech HDMI CEC" + depends on USB_ACM && CEC_CORE + select SERIO + select SERIO_SERPORT + ---help--- + This is a cec driver for the RainShadow Tech HDMI CEC device. + + To compile this driver as a module, choose M here: the + module will be called rainshadow-cec. diff --git a/drivers/media/usb/rainshadow-cec/Makefile b/drivers/media/usb/rainshadow-cec/Makefile new file mode 100644 index 000000000000..a79fbc77e1f7 --- /dev/null +++ b/drivers/media/usb/rainshadow-cec/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec.o diff --git a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c new file mode 100644 index 000000000000..541ca543f71f --- /dev/null +++ b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c @@ -0,0 +1,388 @@ +/* + * RainShadow Tech HDMI CEC driver + * + * Copyright 2016 Hans Verkuil <hverkuil@xs4all.nl + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version of 2 of the License, or (at your + * option) any later version. See the file COPYING in the main directory of + * this archive for more details. + */ + +/* + * Notes: + * + * The higher level protocols are currently disabled. This can be added + * later, similar to how this is done for the Pulse Eight CEC driver. + * + * Documentation of the protocol is available here: + * + * http://rainshadowtech.com/doc/HDMICECtoUSBandRS232v2.0.pdf + */ + +#include <linux/completion.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/serio.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/workqueue.h> + +#include <media/cec.h> + +MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>"); +MODULE_DESCRIPTION("RainShadow Tech HDMI CEC driver"); +MODULE_LICENSE("GPL"); + +#define DATA_SIZE 256 + +struct rain { + struct device *dev; + struct serio *serio; + struct cec_adapter *adap; + struct completion cmd_done; + struct work_struct work; + + /* Low-level ringbuffer, collecting incoming characters */ + char buf[DATA_SIZE]; + unsigned int buf_rd_idx; + unsigned int buf_wr_idx; + unsigned int buf_len; + spinlock_t buf_lock; + + /* command buffer */ + char cmd[DATA_SIZE]; + unsigned int cmd_idx; + bool cmd_started; + + /* reply to a command, only used to store the firmware version */ + char cmd_reply[DATA_SIZE]; + + struct mutex write_lock; +}; + +static void rain_process_msg(struct rain *rain) +{ + struct cec_msg msg = {}; + const char *cmd = rain->cmd + 3; + int stat = -1; + + for (; *cmd; cmd++) { + if (!isxdigit(*cmd)) + continue; + if (isxdigit(cmd[0]) && isxdigit(cmd[1])) { + if (msg.len == CEC_MAX_MSG_SIZE) + break; + if (hex2bin(msg.msg + msg.len, cmd, 1)) + continue; + msg.len++; + cmd++; + continue; + } + if (!cmd[1]) + stat = hex_to_bin(cmd[0]); + break; + } + + if (rain->cmd[0] == 'R') { + if (stat == 1 || stat == 2) + cec_received_msg(rain->adap, &msg); + return; + } + + switch (stat) { + case 1: + cec_transmit_done(rain->adap, CEC_TX_STATUS_OK, + 0, 0, 0, 0); + break; + case 2: + cec_transmit_done(rain->adap, CEC_TX_STATUS_NACK, + 0, 1, 0, 0); + break; + default: + cec_transmit_done(rain->adap, CEC_TX_STATUS_LOW_DRIVE, + 0, 0, 0, 1); + break; + } +} + +static void rain_irq_work_handler(struct work_struct *work) +{ + struct rain *rain = + container_of(work, struct rain, work); + + while (true) { + unsigned long flags; + bool exit_loop; + char data; + + spin_lock_irqsave(&rain->buf_lock, flags); + exit_loop = rain->buf_len == 0; + if (rain->buf_len) { + data = rain->buf[rain->buf_rd_idx]; + rain->buf_len--; + rain->buf_rd_idx = (rain->buf_rd_idx + 1) & 0xff; + } + spin_unlock_irqrestore(&rain->buf_lock, flags); + + if (exit_loop) + break; + + if (!rain->cmd_started && data != '?') + continue; + + switch (data) { + case '\r': + rain->cmd[rain->cmd_idx] = '\0'; + dev_dbg(rain->dev, "received: %s\n", rain->cmd); + if (!memcmp(rain->cmd, "REC", 3) || + !memcmp(rain->cmd, "STA", 3)) { + rain_process_msg(rain); + } else { + strcpy(rain->cmd_reply, rain->cmd); + complete(&rain->cmd_done); + } + rain->cmd_idx = 0; + rain->cmd_started = false; + break; + + case '\n': + rain->cmd_idx = 0; + rain->cmd_started = false; + break; + + case '?': + rain->cmd_idx = 0; + rain->cmd_started = true; + break; + + default: + if (rain->cmd_idx >= DATA_SIZE - 1) { + dev_dbg(rain->dev, + "throwing away %d bytes of garbage\n", rain->cmd_idx); + rain->cmd_idx = 0; + } + rain->cmd[rain->cmd_idx++] = data; + break; + } + } +} + +static irqreturn_t rain_interrupt(struct serio *serio, unsigned char data, + unsigned int flags) +{ + struct rain *rain = serio_get_drvdata(serio); + + if (rain->buf_len == DATA_SIZE) { + dev_warn_once(rain->dev, "buffer overflow\n"); + return IRQ_HANDLED; + } + spin_lock(&rain->buf_lock); + rain->buf_len++; + rain->buf[rain->buf_wr_idx] = data; + rain->buf_wr_idx = (rain->buf_wr_idx + 1) & 0xff; + spin_unlock(&rain->buf_lock); + schedule_work(&rain->work); + return IRQ_HANDLED; +} + +static void rain_disconnect(struct serio *serio) +{ + struct rain *rain = serio_get_drvdata(serio); + + cancel_work_sync(&rain->work); + cec_unregister_adapter(rain->adap); + dev_info(&serio->dev, "disconnected\n"); + serio_close(serio); + serio_set_drvdata(serio, NULL); + kfree(rain); +} + +static int rain_send(struct rain *rain, const char *command) +{ + int err = serio_write(rain->serio, '!'); + + dev_dbg(rain->dev, "send: %s\n", command); + while (!err && *command) + err = serio_write(rain->serio, *command++); + if (!err) + err = serio_write(rain->serio, '~'); + + return err; +} + +static int rain_send_and_wait(struct rain *rain, + const char *cmd, const char *reply) +{ + int err; + + init_completion(&rain->cmd_done); + + mutex_lock(&rain->write_lock); + err = rain_send(rain, cmd); + if (err) + goto err; + + if (!wait_for_completion_timeout(&rain->cmd_done, HZ)) { + err = -ETIMEDOUT; + goto err; + } + if (reply && strncmp(rain->cmd_reply, reply, strlen(reply))) { + dev_dbg(rain->dev, + "transmit of '%s': received '%s' instead of '%s'\n", + cmd, rain->cmd_reply, reply); + err = -EIO; + } +err: + mutex_unlock(&rain->write_lock); + return err; +} + +static int rain_setup(struct rain *rain, struct serio *serio, + struct cec_log_addrs *log_addrs, u16 *pa) +{ + int err; + + err = rain_send_and_wait(rain, "R", "REV"); + if (err) + return err; + dev_info(rain->dev, "Firmware version %s\n", rain->cmd_reply + 4); + + err = rain_send_and_wait(rain, "Q 1", "QTY"); + if (err) + return err; + err = rain_send_and_wait(rain, "c0000", "CFG"); + if (err) + return err; + return rain_send_and_wait(rain, "A F 0000", "ADR"); +} + +static int rain_cec_adap_enable(struct cec_adapter *adap, bool enable) +{ + return 0; +} + +static int rain_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr) +{ + struct rain *rain = cec_get_drvdata(adap); + u8 cmd[16]; + + if (log_addr == CEC_LOG_ADDR_INVALID) + log_addr = CEC_LOG_ADDR_UNREGISTERED; + snprintf(cmd, sizeof(cmd), "A %x", log_addr); + return rain_send_and_wait(rain, cmd, "ADR"); +} + +static int rain_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg) +{ + struct rain *rain = cec_get_drvdata(adap); + char cmd[2 * CEC_MAX_MSG_SIZE + 16]; + unsigned int i; + int err; + + if (msg->len == 1) { + snprintf(cmd, sizeof(cmd), "x%x", cec_msg_destination(msg)); + } else { + char hex[3]; + + snprintf(cmd, sizeof(cmd), "x%x %02x ", + cec_msg_destination(msg), msg->msg[1]); + for (i = 2; i < msg->len; i++) { + snprintf(hex, sizeof(hex), "%02x", msg->msg[i]); + strncat(cmd, hex, sizeof(cmd)); + } + } + mutex_lock(&rain->write_lock); + err = rain_send(rain, cmd); + mutex_unlock(&rain->write_lock); + return err; +} + +static const struct cec_adap_ops rain_cec_adap_ops = { + .adap_enable = rain_cec_adap_enable, + .adap_log_addr = rain_cec_adap_log_addr, + .adap_transmit = rain_cec_adap_transmit, +}; + +static int rain_connect(struct serio *serio, struct serio_driver *drv) +{ + u32 caps = CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS | CEC_CAP_PHYS_ADDR | + CEC_CAP_PASSTHROUGH | CEC_CAP_RC | CEC_CAP_MONITOR_ALL; + struct rain *rain; + int err = -ENOMEM; + struct cec_log_addrs log_addrs = {}; + u16 pa = CEC_PHYS_ADDR_INVALID; + + rain = kzalloc(sizeof(*rain), GFP_KERNEL); + + if (!rain) + return -ENOMEM; + + rain->serio = serio; + rain->adap = cec_allocate_adapter(&rain_cec_adap_ops, rain, + "HDMI CEC", caps, 1); + err = PTR_ERR_OR_ZERO(rain->adap); + if (err < 0) + goto free_device; + + rain->dev = &serio->dev; + serio_set_drvdata(serio, rain); + INIT_WORK(&rain->work, rain_irq_work_handler); + mutex_init(&rain->write_lock); + + err = serio_open(serio, drv); + if (err) + goto delete_adap; + + err = rain_setup(rain, serio, &log_addrs, &pa); + if (err) + goto close_serio; + + err = cec_register_adapter(rain->adap, &serio->dev); + if (err < 0) + goto close_serio; + + rain->dev = &rain->adap->devnode.dev; + return 0; + +close_serio: + serio_close(serio); +delete_adap: + cec_delete_adapter(rain->adap); + serio_set_drvdata(serio, NULL); +free_device: + kfree(rain); + return err; +} + +static struct serio_device_id rain_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_RAINSHADOW_CEC, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, rain_serio_ids); + +static struct serio_driver rain_drv = { + .driver = { + .name = "rainshadow-cec", + }, + .description = "RainShadow Tech HDMI CEC driver", + .id_table = rain_serio_ids, + .interrupt = rain_interrupt, + .connect = rain_connect, + .disconnect = rain_disconnect, +}; + +module_serio_driver(rain_drv); diff --git a/drivers/media/usb/stk1160/Kconfig b/drivers/media/usb/stk1160/Kconfig index 22dff4f3b921..425ed00e2599 100644 --- a/drivers/media/usb/stk1160/Kconfig +++ b/drivers/media/usb/stk1160/Kconfig @@ -6,7 +6,11 @@ config VIDEO_STK1160_COMMON This is a video4linux driver for STK1160 based video capture devices. To compile this driver as a module, choose M here: the - module will be called stk1160 + module will be called stk1160. + + This driver only provides support for video capture. For audio + capture, you need to select the snd-usb-audio driver (i.e. + CONFIG_SND_USB_AUDIO). config VIDEO_STK1160 tristate diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c index c4fdc1fa32ef..7e960d0a5b92 100644 --- a/drivers/media/usb/tm6000/tm6000-video.c +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -631,7 +631,7 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev) urb = usb_alloc_urb(max_packets, GFP_KERNEL); if (!urb) { tm6000_uninit_isoc(dev); - usb_free_urb(urb); + tm6000_free_urb_buffers(dev); return -ENOMEM; } dev->isoc_ctl.urb[i] = urb; diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c index f5c635a67d74..f9c3325aa4d4 100644 --- a/drivers/media/usb/usbvision/usbvision-video.c +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -1501,7 +1501,14 @@ static int usbvision_probe(struct usb_interface *intf, } for (i = 0; i < usbvision->num_alt; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc. + u16 tmp; + + if (uif->altsetting[i].desc.bNumEndpoints < 2) { + ret = -ENODEV; + goto err_pkt; + } + + tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc. wMaxPacketSize); usbvision->alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 04bf35063c4c..46d6be0bb316 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -188,6 +188,21 @@ static struct uvc_format_desc uvc_fmts[] = { .guid = UVC_GUID_FORMAT_GR16, .fcc = V4L2_PIX_FMT_SGRBG16, }, + { + .name = "Depth data 16-bit (Z16)", + .guid = UVC_GUID_FORMAT_INVZ, + .fcc = V4L2_PIX_FMT_Z16, + }, + { + .name = "Greyscale 10-bit (Y10 )", + .guid = UVC_GUID_FORMAT_INVI, + .fcc = V4L2_PIX_FMT_Y10, + }, + { + .name = "IR:Depth 26-bit (INZI)", + .guid = UVC_GUID_FORMAT_INZI, + .fcc = V4L2_PIX_FMT_INZI, + }, }; /* ------------------------------------------------------------------------ diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 07a6c833ef7b..47d93a938dde 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -818,7 +818,7 @@ static void uvc_video_stats_decode(struct uvc_streaming *stream, /* Update the packets counters. */ stream->stats.frame.nb_packets++; - if (len > header_size) + if (len <= header_size) stream->stats.frame.nb_empty++; if (data[1] & UVC_STREAM_ERR) @@ -868,14 +868,8 @@ size_t uvc_video_stats_dump(struct uvc_streaming *stream, char *buf, struct timespec ts; size_t count = 0; - ts.tv_sec = stream->stats.stream.stop_ts.tv_sec - - stream->stats.stream.start_ts.tv_sec; - ts.tv_nsec = stream->stats.stream.stop_ts.tv_nsec - - stream->stats.stream.start_ts.tv_nsec; - if (ts.tv_nsec < 0) { - ts.tv_sec--; - ts.tv_nsec += 1000000000; - } + ts = timespec_sub(stream->stats.stream.stop_ts, + stream->stats.stream.start_ts); /* Compute the SCR.SOF frequency estimate. At the nominal 1kHz SOF * frequency this will not overflow before more than 1h. diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index 4205e7a423f0..15e415e32c7f 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -143,6 +143,15 @@ #define UVC_GUID_FORMAT_RW10 \ { 'R', 'W', '1', '0', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_INVZ \ + { 'I', 'N', 'V', 'Z', 0x90, 0x2d, 0x58, 0x4a, \ + 0x92, 0x0b, 0x77, 0x3f, 0x1f, 0x2c, 0x55, 0x6b} +#define UVC_GUID_FORMAT_INZI \ + { 'I', 'N', 'Z', 'I', 0x66, 0x1a, 0x42, 0xa2, \ + 0x90, 0x65, 0xd0, 0x18, 0x14, 0xa8, 0xef, 0x8a} +#define UVC_GUID_FORMAT_INVI \ + { 'I', 'N', 'V', 'I', 0xdb, 0x57, 0x49, 0x5e, \ + 0x8e, 0x3f, 0xf4, 0x79, 0x53, 0x2b, 0x94, 0x6f} /* ------------------------------------------------------------------------ * Driver specific constants. diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c index f2d6fc03dda0..efdcd5bd6a4c 100644 --- a/drivers/media/usb/zr364xx/zr364xx.c +++ b/drivers/media/usb/zr364xx/zr364xx.c @@ -600,6 +600,14 @@ static int zr364xx_read_video_callback(struct zr364xx_camera *cam, ptr = pdest = frm->lpvbits; if (frm->ulState == ZR364XX_READ_IDLE) { + if (purb->actual_length < 128) { + /* header incomplete */ + dev_info(&cam->udev->dev, + "%s: buffer (%d bytes) too small to hold jpeg header. Discarding.\n", + __func__, purb->actual_length); + return -EINVAL; + } + frm->ulState = ZR364XX_READ_FRAME; frm->cur_size = 0; |