diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-core.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-core.c | 30 |
1 files changed, 27 insertions, 3 deletions
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index bf7bb1c412fb..40d438d7234d 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -713,12 +713,26 @@ static void cx23885_dev_checkrevision(struct cx23885_dev *dev) dev->hwrevision = 0xa1; break; case 0x02: - /* CX23885-13Z */ + /* CX23885-13Z/14Z */ dev->hwrevision = 0xb0; break; case 0x03: - /* CX23888-22Z */ - dev->hwrevision = 0xc0; + if (dev->pci->device == 0x8880) { + /* CX23888-21Z/22Z */ + dev->hwrevision = 0xc0; + } else { + /* CX23885-14Z */ + dev->hwrevision = 0xa4; + } + break; + case 0x04: + if (dev->pci->device == 0x8880) { + /* CX23888-31Z */ + dev->hwrevision = 0xd0; + } else { + /* CX23885-15Z, CX23888-31Z */ + dev->hwrevision = 0xa5; + } break; case 0x0e: /* CX23887-15Z */ @@ -756,6 +770,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) /* Configure the internal memory */ if (dev->pci->device == 0x8880) { + /* Could be 887 or 888, assume a default */ dev->bridge = CX23885_BRIDGE_887; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 25000000; @@ -868,6 +883,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n", __func__, dev->radio_type, dev->radio_addr); + /* The cx23417 encoder has GPIO's that need to be initialised + * before DVB, so that demodulators and tuners are out of + * reset before DVB uses them. + */ + if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) || + (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) + cx23885_mc417_init(dev); + /* init hardware */ cx23885_reset(dev); @@ -1250,6 +1273,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port, switch (dev->bridge) { case CX23885_BRIDGE_885: case CX23885_BRIDGE_887: + case CX23885_BRIDGE_888: /* enable irqs */ dprintk(1, "%s() enabling TS int's and DMA\n", __func__); cx_set(port->reg_ts_int_msk, port->ts_int_msk_val); |