diff options
Diffstat (limited to 'drivers/media/video/ovcamchip/ov7x20.c')
| -rw-r--r-- | drivers/media/video/ovcamchip/ov7x20.c | 454 |
1 files changed, 0 insertions, 454 deletions
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c deleted file mode 100644 index 8e26ae338f31..000000000000 --- a/drivers/media/video/ovcamchip/ov7x20.c +++ /dev/null @@ -1,454 +0,0 @@ -/* OmniVision OV7620/OV7120 Camera Chip Support Code - * - * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> - * http://alpha.dyndns.org/ov511/ - * - * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. - */ - -#define DEBUG - -#include <linux/slab.h> -#include "ovcamchip_priv.h" - -/* Registers */ -#define REG_GAIN 0x00 /* gain [5:0] */ -#define REG_BLUE 0x01 /* blue gain */ -#define REG_RED 0x02 /* red gain */ -#define REG_SAT 0x03 /* saturation */ -#define REG_BRT 0x06 /* Y brightness */ -#define REG_SHARP 0x07 /* analog sharpness */ -#define REG_BLUE_BIAS 0x0C /* WB blue ratio [5:0] */ -#define REG_RED_BIAS 0x0D /* WB red ratio [5:0] */ -#define REG_EXP 0x10 /* exposure */ - -/* Default control settings. Values are in terms of V4L2 controls. */ -#define OV7120_DFL_BRIGHT 0x60 -#define OV7620_DFL_BRIGHT 0x60 -#define OV7120_DFL_SAT 0xb0 -#define OV7620_DFL_SAT 0xc0 -#define DFL_AUTO_EXP 1 -#define DFL_AUTO_GAIN 1 -#define OV7120_DFL_GAIN 0x00 -#define OV7620_DFL_GAIN 0x00 -/* NOTE: Since autoexposure is the default, these aren't programmed into the - * OV7x20 chip. They are just here because V4L2 expects a default */ -#define OV7120_DFL_EXP 0x7f -#define OV7620_DFL_EXP 0x7f - -/* Window parameters */ -#define HWSBASE 0x2F /* From 7620.SET (spec is wrong) */ -#define HWEBASE 0x2F -#define VWSBASE 0x05 -#define VWEBASE 0x05 - -struct ov7x20 { - int auto_brt; - int auto_exp; - int auto_gain; - int backlight; - int bandfilt; - int mirror; -}; - -/* Contrast look-up table */ -static unsigned char ctab[] = { - 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57, - 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff -}; - -/* Settings for (Black & White) OV7120 camera chip */ -static struct ovcamchip_regvals regvals_init_7120[] = { - { 0x12, 0x80 }, /* reset */ - { 0x13, 0x00 }, /* Autoadjust off */ - { 0x12, 0x20 }, /* Disable AWB */ - { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */ - { 0x00, OV7120_DFL_GAIN }, - { 0x01, 0x80 }, - { 0x02, 0x80 }, - { 0x03, OV7120_DFL_SAT }, - { 0x06, OV7120_DFL_BRIGHT }, - { 0x07, 0x00 }, - { 0x0c, 0x20 }, - { 0x0d, 0x20 }, - { 0x11, 0x01 }, - { 0x14, 0x84 }, - { 0x15, 0x01 }, - { 0x16, 0x03 }, - { 0x17, 0x2f }, - { 0x18, 0xcf }, - { 0x19, 0x06 }, - { 0x1a, 0xf5 }, - { 0x1b, 0x00 }, - { 0x20, 0x08 }, - { 0x21, 0x80 }, - { 0x22, 0x80 }, - { 0x23, 0x00 }, - { 0x26, 0xa0 }, - { 0x27, 0xfa }, - { 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */ - { 0x29, DFL_AUTO_EXP?0x00:0x80 }, - { 0x2a, 0x10 }, - { 0x2b, 0x00 }, - { 0x2c, 0x88 }, - { 0x2d, 0x95 }, - { 0x2e, 0x80 }, - { 0x2f, 0x44 }, - { 0x60, 0x20 }, - { 0x61, 0x02 }, - { 0x62, 0x5f }, - { 0x63, 0xd5 }, - { 0x64, 0x57 }, - { 0x65, 0x83 }, /* OV says "don't change this value" */ - { 0x66, 0x55 }, - { 0x67, 0x92 }, - { 0x68, 0xcf }, - { 0x69, 0x76 }, - { 0x6a, 0x22 }, - { 0x6b, 0xe2 }, - { 0x6c, 0x40 }, - { 0x6d, 0x48 }, - { 0x6e, 0x80 }, - { 0x6f, 0x0d }, - { 0x70, 0x89 }, - { 0x71, 0x00 }, - { 0x72, 0x14 }, - { 0x73, 0x54 }, - { 0x74, 0xa0 }, - { 0x75, 0x8e }, - { 0x76, 0x00 }, - { 0x77, 0xff }, - { 0x78, 0x80 }, - { 0x79, 0x80 }, - { 0x7a, 0x80 }, - { 0x7b, 0xe6 }, - { 0x7c, 0x00 }, - { 0x24, 0x3a }, - { 0x25, 0x60 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* Settings for (color) OV7620 camera chip */ -static struct ovcamchip_regvals regvals_init_7620[] = { - { 0x12, 0x80 }, /* reset */ - { 0x00, OV7620_DFL_GAIN }, - { 0x01, 0x80 }, - { 0x02, 0x80 }, - { 0x03, OV7620_DFL_SAT }, - { 0x06, OV7620_DFL_BRIGHT }, - { 0x07, 0x00 }, - { 0x0c, 0x24 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0x11, 0x01 }, - { 0x12, 0x24 }, - { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, - { 0x14, 0x84 }, - { 0x15, 0x01 }, - { 0x16, 0x03 }, - { 0x17, 0x2f }, - { 0x18, 0xcf }, - { 0x19, 0x06 }, - { 0x1a, 0xf5 }, - { 0x1b, 0x00 }, - { 0x20, 0x18 }, - { 0x21, 0x80 }, - { 0x22, 0x80 }, - { 0x23, 0x00 }, - { 0x26, 0xa2 }, - { 0x27, 0xea }, - { 0x28, 0x20 }, - { 0x29, DFL_AUTO_EXP?0x00:0x80 }, - { 0x2a, 0x10 }, - { 0x2b, 0x00 }, - { 0x2c, 0x88 }, - { 0x2d, 0x91 }, - { 0x2e, 0x80 }, - { 0x2f, 0x44 }, - { 0x60, 0x27 }, - { 0x61, 0x02 }, - { 0x62, 0x5f }, - { 0x63, 0xd5 }, - { 0x64, 0x57 }, - { 0x65, 0x83 }, - { 0x66, 0x55 }, - { 0x67, 0x92 }, - { 0x68, 0xcf }, - { 0x69, 0x76 }, - { 0x6a, 0x22 }, - { 0x6b, 0x00 }, - { 0x6c, 0x02 }, - { 0x6d, 0x44 }, - { 0x6e, 0x80 }, - { 0x6f, 0x1d }, - { 0x70, 0x8b }, - { 0x71, 0x00 }, - { 0x72, 0x14 }, - { 0x73, 0x54 }, - { 0x74, 0x00 }, - { 0x75, 0x8e }, - { 0x76, 0x00 }, - { 0x77, 0xff }, - { 0x78, 0x80 }, - { 0x79, 0x80 }, - { 0x7a, 0x80 }, - { 0x7b, 0xe2 }, - { 0x7c, 0x00 }, - { 0xff, 0xff }, /* END MARKER */ -}; - -/* Returns index into the specified look-up table, with 'n' elements, for which - * the value is greater than or equal to "val". If a match isn't found, (n-1) - * is returned. The entries in the table must be in ascending order. */ -static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val) -{ - int i = 0; - - while (lut[i] < val && i < n) - i++; - - return i; -} - -/* This initializes the OV7x20 camera chip and relevant variables. */ -static int ov7x20_init(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x20 *s; - int rc; - - DDEBUG(4, &c->dev, "entered"); - - if (ov->mono) - rc = ov_write_regvals(c, regvals_init_7120); - else - rc = ov_write_regvals(c, regvals_init_7620); - - if (rc < 0) - return rc; - - ov->spriv = s = kzalloc(sizeof *s, GFP_KERNEL); - if (!s) - return -ENOMEM; - - s->auto_brt = 1; - s->auto_exp = DFL_AUTO_EXP; - s->auto_gain = DFL_AUTO_GAIN; - - return 0; -} - -static int ov7x20_free(struct i2c_client *c) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - - kfree(ov->spriv); - return 0; -} - -static int ov7x20_set_v4l1_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x20 *s = ov->spriv; - int rc; - int v = ctl->value; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - { - /* Use Y gamma control instead. Bit 0 enables it. */ - rc = ov_write(c, 0x64, ctab[v >> 12]); - break; - } - case OVCAMCHIP_CID_BRIGHT: - /* 7620 doesn't like manual changes when in auto mode */ - if (!s->auto_brt) - rc = ov_write(c, REG_BRT, v >> 8); - else - rc = 0; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_write(c, REG_SAT, v >> 8); - break; - case OVCAMCHIP_CID_EXP: - if (!s->auto_exp) - rc = ov_write(c, REG_EXP, v); - else - rc = -EBUSY; - break; - case OVCAMCHIP_CID_FREQ: - { - int sixty = (v == 60); - - rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80); - if (rc < 0) - goto out; - - rc = ov_write(c, 0x2b, sixty?0x00:0xac); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x76, 0x01, 0x01); - break; - } - case OVCAMCHIP_CID_BANDFILT: - rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); - s->bandfilt = v; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); - s->auto_brt = v; - break; - case OVCAMCHIP_CID_AUTOEXP: - rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01); - s->auto_exp = v; - break; - case OVCAMCHIP_CID_BACKLIGHT: - { - rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08); - if (rc < 0) - goto out; - - rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02); - s->backlight = v; - break; - } - case OVCAMCHIP_CID_MIRROR: - rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); - s->mirror = v; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - -out: - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); - return rc; -} - -static int ov7x20_get_v4l1_control(struct i2c_client *c, - struct ovcamchip_control *ctl) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - struct ov7x20 *s = ov->spriv; - int rc = 0; - unsigned char val = 0; - - switch (ctl->id) { - case OVCAMCHIP_CID_CONT: - rc = ov_read(c, 0x64, &val); - ctl->value = ov7x20_lut_find(ctab, 16, val) << 12; - break; - case OVCAMCHIP_CID_BRIGHT: - rc = ov_read(c, REG_BRT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_SAT: - rc = ov_read(c, REG_SAT, &val); - ctl->value = val << 8; - break; - case OVCAMCHIP_CID_EXP: - rc = ov_read(c, REG_EXP, &val); - ctl->value = val; - break; - case OVCAMCHIP_CID_BANDFILT: - ctl->value = s->bandfilt; - break; - case OVCAMCHIP_CID_AUTOBRIGHT: - ctl->value = s->auto_brt; - break; - case OVCAMCHIP_CID_AUTOEXP: - ctl->value = s->auto_exp; - break; - case OVCAMCHIP_CID_BACKLIGHT: - ctl->value = s->backlight; - break; - case OVCAMCHIP_CID_MIRROR: - ctl->value = s->mirror; - break; - default: - DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); - return -EPERM; - } - - DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); - return rc; -} - -static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win) -{ - struct ovcamchip *ov = i2c_get_clientdata(c); - int qvga = win->quarter; - - /******** QVGA-specific regs ********/ - ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20); - ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20); - ov_write(c, 0x24, qvga?0x20:0x3a); - ov_write(c, 0x25, qvga?0x30:0x60); - ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40); - if (!ov->mono) - ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0); - ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20); - - /******** Clock programming ********/ - - ov_write(c, 0x11, win->clockdiv); - - return 0; -} - -static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win) -{ - int ret, hwscale, vwscale; - - ret = ov7x20_mode_init(c, win); - if (ret < 0) - return ret; - - if (win->quarter) { - hwscale = 1; - vwscale = 0; - } else { - hwscale = 2; - vwscale = 1; - } - - ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); - ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); - ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); - ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); - - return 0; -} - -static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg) -{ - switch (cmd) { - case OVCAMCHIP_CMD_S_CTRL: - return ov7x20_set_v4l1_control(c, arg); - case OVCAMCHIP_CMD_G_CTRL: - return ov7x20_get_v4l1_control(c, arg); - case OVCAMCHIP_CMD_S_MODE: - return ov7x20_set_window(c, arg); - default: - DDEBUG(2, &c->dev, "command not supported: %d", cmd); - return -ENOIOCTLCMD; - } -} - -struct ovcamchip_ops ov7x20_ops = { - .init = ov7x20_init, - .free = ov7x20_free, - .command = ov7x20_command, -}; |