diff options
Diffstat (limited to 'drivers/media/video')
208 files changed, 58784 insertions, 5886 deletions
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index d82c8a30ba44..f31a19890b15 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -16,30 +16,7 @@ config VIDEO_ADV_DEBUG V4L devices. In doubt, say N. -config VIDEO_BT848 - tristate "BT848 Video For Linux" - depends on VIDEO_DEV && PCI && I2C - select I2C_ALGOBIT - select FW_LOADER - select VIDEO_BTCX - select VIDEO_BUF - select VIDEO_IR - select VIDEO_TUNER - select VIDEO_TVEEPROM - ---help--- - Support for BT848 based frame grabber/overlay boards. This includes - the Miro, Hauppauge and STB boards. Please read the material in - <file:Documentation/video4linux/bttv/> for more information. - - To compile this driver as a module, choose M here: the - module will be called bttv. - -config VIDEO_BT848_DVB - bool "DVB/ATSC Support for bt878 based TV cards" - depends on VIDEO_BT848 && DVB_CORE - select DVB_BT8XX - ---help--- - This adds support for DVB/ATSC cards based on the BT878 chip. +source "drivers/media/video/bt8xx/Kconfig" config VIDEO_SAA6588 tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards" @@ -142,6 +119,8 @@ config VIDEO_CPIA_USB otherwise say N. This will not work with the Creative Webcam III. It is also available as a module (cpia_usb). +source "drivers/media/video/cpia2/Kconfig" + config VIDEO_SAA5246A tristate "SAA5246A, SAA5281 Teletext processor" depends on VIDEO_DEV && I2C @@ -312,8 +291,6 @@ config VIDEO_HEXIUM_GEMINI source "drivers/media/video/cx88/Kconfig" -source "drivers/media/video/em28xx/Kconfig" - config VIDEO_OVCAMCHIP tristate "OmniVision Camera Chip support" depends on VIDEO_DEV && I2C @@ -339,18 +316,283 @@ config VIDEO_M32R_AR_M64278 Say Y here to use the Renesas M64278E-800 camera module, which supports VGA(640x480 pixcels) size of images. -config VIDEO_AUDIO_DECODER - tristate "Add support for additional audio chipsets" +config VIDEO_MSP3400 + tristate "Micronas MSP34xx audio decoders" + depends on VIDEO_DEV && I2C + ---help--- + Support for the Micronas MSP34xx series of audio decoders. + + To compile this driver as a module, choose M here: the + module will be called msp3400 + +config VIDEO_CS53L32A + tristate "Cirrus Logic CS53L32A audio ADC" depends on VIDEO_DEV && I2C && EXPERIMENTAL ---help--- - Say Y here to compile drivers for WM8775 and CS53L32A audio - decoders. + Support for the Cirrus Logic CS53L32A low voltage + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs53l32a -config VIDEO_DECODER - tristate "Add support for additional video chipsets" +config VIDEO_WM8775 + tristate "Wolfson Microelectronics WM8775 audio ADC" depends on VIDEO_DEV && I2C && EXPERIMENTAL ---help--- - Say Y here to compile drivers for SAA7115, SAA7127 and CX25840 - video decoders. + Support for the Wolfson Microelectronics WM8775 + high performance stereo A/D Converter. + + To compile this driver as a module, choose M here: the + module will be called wm8775 + +source "drivers/media/video/cx25840/Kconfig" + +config VIDEO_SAA711X + tristate "Philips SAA7113/4/5 video decoders" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + ---help--- + Support for the Philips SAA7113/4/5 video decoders. + + To compile this driver as a module, choose M here: the + module will be called saa7115 + +config VIDEO_SAA7127 + tristate "Philips SAA7127/9 digital video encoders" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + ---help--- + Support for the Philips SAA7127/9 digital video encoders. + + To compile this driver as a module, choose M here: the + module will be called saa7127 + +# +# USB Multimedia device configuration +# + +menu "V4L USB devices" + depends on USB && VIDEO_DEV + +source "drivers/media/video/em28xx/Kconfig" + +config USB_VICAM + tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" + depends on USB && VIDEO_DEV && EXPERIMENTAL + ---help--- + Say Y here if you have 3com homeconnect camera (vicam). + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Multimedia Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called vicam. + +config USB_DSBR + tristate "D-Link USB FM radio support (EXPERIMENTAL)" + depends on USB && VIDEO_DEV && EXPERIMENTAL + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + This driver uses the Video For Linux API. You must enable + (Y or M in config) Video For Linux (under Character Devices) + to use this driver. Information on this API and pointers to + "v4l" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called dsbr100. + +config USB_ET61X251 + tristate "USB ET61X[12]51 PC Camera Controller support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for cameras based on Etoms ET61X151 + or ET61X251 PC Camera Controllers. + + See <file:Documentation/usb/et61x251.txt> for more informations. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called et61x251. + +config USB_IBMCAM + tristate "USB IBM (Xirlink) C-it Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect a IBM "C-It" camera, also known as + "Xirlink PC Camera" to your computer's USB port. For more + information, read <file:Documentation/usb/ibmcam.txt>. + + This driver uses the Video For Linux API. You must enable + (Y or M in config) Video For Linux (under Character Devices) + to use this driver. Information on this API and pointers to + "v4l" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called ibmcam. + + This camera has several configuration options which + can be specified when you load the module. Read + <file:Documentation/usb/ibmcam.txt> to learn more. + +config USB_KONICAWC + tristate "USB Konica Webcam support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for webcams based on a Konica + chipset. This is known to work with the Intel YC76 webcam. + + This driver uses the Video For Linux API. You must enable + (Y or M in config) Video For Linux (under Character Devices) + to use this driver. Information on this API and pointers to + "v4l" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called konicawc. + +config USB_OV511 + tristate "USB OV511 Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. See <file:Documentation/usb/ov511.txt> for more + information and for a list of supported cameras. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Character Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called ov511. + +config USB_SE401 + tristate "USB SE401 Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. See <file:Documentation/usb/se401.txt> for more + information and for a list of supported cameras. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Multimedia Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called se401. + +config USB_SN9C102 + tristate "USB SN9C10x PC Camera Controller support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for cameras based on SONiX SN9C101, + SN9C102 or SN9C103 PC Camera Controllers. + + See <file:Documentation/usb/sn9c102.txt> for more informations. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called sn9c102. + +config USB_STV680 + tristate "USB STV680 (Pencam) Camera support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. This includes the Pencam line of cameras. + See <file:Documentation/usb/stv680.txt> for more information and for + a list of supported cameras. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Multimedia Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called stv680. + +config USB_W9968CF + tristate "USB W996[87]CF JPEG Dual Mode Camera support" + depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP + ---help--- + Say Y here if you want support for cameras based on OV681 or + Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. + + This driver has an optional plugin, which is distributed as a + separate module only (released under GPL). It allows to use higher + resolutions and framerates, but cannot be included in the official + Linux kernel for performance purposes. + + See <file:Documentation/usb/w9968cf.txt> for more informations. + + This driver uses the Video For Linux and the I2C APIs. It needs the + OmniVision Camera Chip support as well. You must say Y or M to + "Video For Linux", "I2C Support" and "OmniVision Camera Chip + support" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called w9968cf. + +config USB_ZC0301 + tristate "USB ZC0301 Image Processor and Control Chip support" + depends on USB && VIDEO_DEV + ---help--- + Say Y here if you want support for cameras based on the ZC0301 + Image Processor and Control Chip. + + See <file:Documentation/usb/zc0301.txt> for more informations. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. + + To compile this driver as a module, choose M here: the + module will be called zc0301. + +config USB_PWC + tristate "USB Philips Cameras" + depends on USB && VIDEO_DEV + ---help--- + Say Y or M here if you want to use one of these Philips & OEM + webcams: + * Philips PCA645, PCA646 + * Philips PCVC675, PCVC680, PCVC690 + * Philips PCVC720/40, PCVC730, PCVC740, PCVC750 + * Askey VC010 + * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' + and 'Orbit'/'Sphere' + * Samsung MPC-C10, MPC-C30 + * Creative Webcam 5, Pro Ex + * SOTEC Afina Eye + * Visionite VCS-UC300, VCS-UM100 + + The PCA635, PCVC665 and PCVC720/20 are not supported by this driver + and never will be, but the 665 and 720/20 are supported by other + drivers. + + See <file:Documentation/usb/philips.txt> for more information and + installation instructions. + + The built-in microphone is enabled by selecting USB Audio support. + + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" (under Character Devices) to use this driver. + Information on this API and pointers to "v4l" programs may be found + at <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called pwc. + +endmenu # V4L USB devices endmenu diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index faf728366c4e..1c0e72e5a593 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -2,9 +2,6 @@ # Makefile for the video capture/playback device drivers. # -bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ - bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \ - bttv-input.o zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o zr36067-objs := zoran_procfs.o zoran_device.o \ zoran_driver.o zoran_card.o @@ -15,8 +12,8 @@ msp3400-objs := msp3400-driver.o msp3400-kthreads.o obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o -obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \ - tda7432.o tda9875.o ir-kbd-i2c.o +obj-$(CONFIG_VIDEO_BT848) += bt8xx/ +obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o obj-$(CONFIG_VIDEO_ZR36120) += zoran.o @@ -44,10 +41,13 @@ obj-$(CONFIG_VIDEO_MEYE) += meye.o obj-$(CONFIG_VIDEO_SAA7134) += ir-kbd-i2c.o saa7134/ obj-$(CONFIG_VIDEO_CX88) += cx88/ obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ -obj-$(CONFIG_VIDEO_EM28XX) += saa711x.o tvp5150.o -obj-$(CONFIG_VIDEO_AUDIO_DECODER) += wm8775.o cs53l32a.o +obj-$(CONFIG_VIDEO_EM28XX) += tvp5150.o +obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o +obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o +obj-$(CONFIG_VIDEO_WM8775) += wm8775.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ -obj-$(CONFIG_VIDEO_MXB) += saa7111.o tuner.o tda9840.o tea6415c.o tea6420.o mxb.o +obj-$(CONFIG_VIDEO_CPIA2) += cpia2/ +obj-$(CONFIG_VIDEO_MXB) += saa7111.o tda9840.o tea6415c.o tea6420.o mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o obj-$(CONFIG_VIDEO_DPC) += saa7111.o dpc7146.o @@ -61,6 +61,27 @@ obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o -obj-$(CONFIG_VIDEO_DECODER) += saa7115.o cx25840/ saa7127.o +obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o +obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o + +et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o +zc0301-objs := zc0301_core.o zc0301_pas202bcb.o + +obj-$(CONFIG_USB_DABUSB) += dabusb.o +obj-$(CONFIG_USB_DSBR) += dsbr100.o +obj-$(CONFIG_USB_OV511) += ov511.o +obj-$(CONFIG_USB_SE401) += se401.o +obj-$(CONFIG_USB_STV680) += stv680.o +obj-$(CONFIG_USB_W9968CF) += w9968cf.o + +obj-$(CONFIG_USB_SN9C102) += sn9c102/ +obj-$(CONFIG_USB_ET61X251) += et61x251/ +obj-$(CONFIG_USB_PWC) += pwc/ +obj-$(CONFIG_USB_ZC0301) += zc0301/ + +obj-$(CONFIG_USB_IBMCAM) += usbvideo/ +obj-$(CONFIG_USB_KONICAWC) += usbvideo/ +obj-$(CONFIG_USB_VICAM) += usbvideo/ EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index 4ce07ae62dac..48709582a186 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -1,9 +1,9 @@ -/* +/* * adv7170 - adv7170, adv7171 video encoder driver version 0.0.1 * * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> * - * Based on adv7176 driver by: + * Based on adv7176 driver by: * * Copyright (C) 1998 Dave Perks <dperks@ibm.net> * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net> @@ -53,7 +53,6 @@ MODULE_AUTHOR("Maxim Yevtyushkin"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(x) (x)->name @@ -125,24 +124,21 @@ adv7170_write_block (struct i2c_client *client, if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { /* do raw I2C, not smbus compatible */ struct adv7170 *encoder = i2c_get_clientdata(client); - struct i2c_msg msg; u8 block_data[32]; + int block_len; - msg.addr = client->addr; - msg.flags = 0; while (len >= 2) { - msg.buf = (char *) block_data; - msg.len = 0; - block_data[msg.len++] = reg = data[0]; + block_len = 0; + block_data[block_len++] = reg = data[0]; do { - block_data[msg.len++] = + block_data[block_len++] = encoder->reg[reg++] = data[1]; len -= 2; data += 2; } while (len >= 2 && data[0] == reg && - msg.len < 32); - if ((ret = i2c_transfer(client->adapter, - &msg, 1)) < 0) + block_len < 32); + if ((ret = i2c_master_send(client, block_data, + block_len)) < 0) break; } } else { @@ -177,7 +173,7 @@ adv7170_write_block (struct i2c_client *client, static const unsigned char init_NTSC[] = { 0x00, 0x10, // MR0 0x01, 0x20, // MR1 - 0x02, 0x0e, // MR2 RTC control: bits 2 and 1 + 0x02, 0x0e, // MR2 RTC control: bits 2 and 1 0x03, 0x80, // MR3 0x04, 0x30, // MR4 0x05, 0x00, // Reserved @@ -200,7 +196,7 @@ static const unsigned char init_NTSC[] = { 0x16, 0x00, // CGMS_WSS_0 0x17, 0x00, // CGMS_WSS_1 0x18, 0x00, // CGMS_WSS_2 - 0x19, 0x00, // Teletext Ctl + 0x19, 0x00, // Teletext Ctl }; static const unsigned char init_PAL[] = { @@ -385,7 +381,7 @@ static unsigned short normal_i2c[] = }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 4e218f22b214..68e7d7aff5e6 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -1,4 +1,4 @@ -/* +/* * adv7175 - adv7175a video encoder driver version 0.0.3 * * Copyright (C) 1998 Dave Perks <dperks@ibm.net> @@ -49,7 +49,6 @@ MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(s) (s)->name @@ -68,8 +67,6 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* ----------------------------------------------------------------------- */ struct adv7175 { - unsigned char reg[128]; - int norm; int input; int enable; @@ -95,9 +92,6 @@ adv7175_write (struct i2c_client *client, u8 reg, u8 value) { - struct adv7175 *encoder = i2c_get_clientdata(client); - - encoder->reg[reg] = value; return i2c_smbus_write_byte_data(client, reg, value); } @@ -120,25 +114,21 @@ adv7175_write_block (struct i2c_client *client, * the adapter understands raw I2C */ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { /* do raw I2C, not smbus compatible */ - struct adv7175 *encoder = i2c_get_clientdata(client); - struct i2c_msg msg; u8 block_data[32]; + int block_len; - msg.addr = client->addr; - msg.flags = 0; while (len >= 2) { - msg.buf = (char *) block_data; - msg.len = 0; - block_data[msg.len++] = reg = data[0]; + block_len = 0; + block_data[block_len++] = reg = data[0]; do { - block_data[msg.len++] = - encoder->reg[reg++] = data[1]; + block_data[block_len++] = data[1]; + reg++; len -= 2; data += 2; } while (len >= 2 && data[0] == reg && - msg.len < 32); - if ((ret = i2c_transfer(client->adapter, - &msg, 1)) < 0) + block_len < 32); + if ((ret = i2c_master_send(client, block_data, + block_len)) < 0) break; } } else { @@ -171,24 +161,6 @@ set_subcarrier_freq (struct i2c_client *client, adv7175_write(client, 0x05, 0x25); } -#ifdef ENCODER_DUMP -static void -dump (struct i2c_client *client) -{ - struct adv7175 *encoder = i2c_get_clientdata(client); - int i, j; - - printk(KERN_INFO "%s: registry dump\n", I2C_NAME(client)); - for (i = 0; i < 182 / 8; i++) { - printk("%s: 0x%02x -", I2C_NAME(client), i * 8); - for (j = 0; j < 8; j++) { - printk(" 0x%02x", encoder->reg[i * 8 + j]); - } - printk("\n"); - } -} -#endif - /* ----------------------------------------------------------------------- */ // Output filter: S-Video Composite @@ -261,7 +233,7 @@ adv7175_command (struct i2c_client *client, sizeof(init_common)); adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - break; + break; case ENCODER_GET_CAPABILITIES: { @@ -407,14 +379,6 @@ adv7175_command (struct i2c_client *client, } break; -#ifdef ENCODER_DUMP - case ENCODER_DUMP: - { - dump(client); - } - break; -#endif - default: return -EINVAL; } @@ -435,7 +399,7 @@ static unsigned short normal_i2c[] = }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 994b75fe165a..dbe025170599 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -31,8 +31,8 @@ #include <linux/mm.h> #include <linux/sched.h> #include <linux/videodev.h> +#include <linux/mutex.h> -#include <asm/semaphore.h> #include <asm/uaccess.h> #include <asm/m32r.h> #include <asm/io.h> @@ -117,7 +117,7 @@ struct ar_device { int width, height; int frame_bytes, line_bytes; wait_queue_head_t wait; - struct semaphore lock; + struct mutex lock; }; static int video_nr = -1; /* video device number (first free) */ @@ -161,39 +161,39 @@ void iic(int n, unsigned long addr, unsigned long data1, unsigned long data2, { int i; - /* Slave Address */ - ar_outl(addr, PLDI2CDATA); + /* Slave Address */ + ar_outl(addr, PLDI2CDATA); wait_for_vsync(); - /* Start */ - ar_outl(1, PLDI2CCND); + /* Start */ + ar_outl(1, PLDI2CCND); wait_acknowledge(); /* Transfer data 1 */ - ar_outl(data1, PLDI2CDATA); + ar_outl(data1, PLDI2CDATA); wait_for_vsync(); - ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); wait_acknowledge(); /* Transfer data 2 */ - ar_outl(data2, PLDI2CDATA); + ar_outl(data2, PLDI2CDATA); wait_for_vsync(); - ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); wait_acknowledge(); if (n == 3) { /* Transfer data 3 */ - ar_outl(data3, PLDI2CDATA); + ar_outl(data3, PLDI2CDATA); wait_for_vsync(); - ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); + ar_outl(PLDI2CSTEN_STEN, PLDI2CSTEN); wait_acknowledge(); - } + } - /* Stop */ + /* Stop */ for (i = 0; i < 100; i++) cpu_relax(); - ar_outl(2, PLDI2CCND); - ar_outl(2, PLDI2CCND); + ar_outl(2, PLDI2CCND); + ar_outl(2, PLDI2CCND); while (ar_inl(PLDI2CSTS) & PLDI2CSTS_BB) cpu_relax(); @@ -204,24 +204,24 @@ void init_iic(void) { DEBUG(1, "init_iic:\n"); - /* + /* * ICU Setting (iic) */ - /* I2C Setting */ - ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */ - ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */ - ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */ + /* I2C Setting */ + ar_outl(0x0, PLDI2CCR); /* I2CCR Disable */ + ar_outl(0x0300, PLDI2CMOD); /* I2CMOD ACK/8b-data/7b-addr/auto */ + ar_outl(0x1, PLDI2CACK); /* I2CACK ACK */ /* I2C CLK */ - /* 50MH-100k */ + /* 50MH-100k */ if (freq == 75) { - ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */ + ar_outl(369, PLDI2CFREQ); /* BCLK = 75MHz */ } else if (freq == 50) { ar_outl(244, PLDI2CFREQ); /* BCLK = 50MHz */ } else { ar_outl(244, PLDI2CFREQ); /* default: BCLK = 50MHz */ } - ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */ + ar_outl(0x1, PLDI2CCR); /* I2CCR Enable */ } /************************************************************************** @@ -253,7 +253,7 @@ static inline void wait_for_vertical_sync(int exp_line) /* * check HCOUNT because we cannot check vertical sync. - */ + */ for (; tmout >= 0; tmout--) { l = ar_inl(ARVHCOUNT); if (l == exp_line) @@ -288,7 +288,7 @@ static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) if (ar->mode == AR_MODE_NORMAL) arvcr1 |= ARVCR1_NORMAL; - down(&ar->lock); + mutex_lock(&ar->lock); #if USE_INT local_irq_save(flags); @@ -392,7 +392,7 @@ static ssize_t ar_read(struct file *file, char *buf, size_t count, loff_t *ppos) } DEBUG(1, "ret = %d\n", ret); out_up: - up(&ar->lock); + mutex_unlock(&ar->lock); return ret; } @@ -456,7 +456,7 @@ static int ar_do_ioctl(struct inode *inode, struct file *file, (w->width != AR_WIDTH_QVGA || w->height != AR_HEIGHT_QVGA)) return -EINVAL; - down(&ar->lock); + mutex_lock(&ar->lock); ar->width = w->width; ar->height = w->height; if (ar->width == AR_WIDTH_VGA) { @@ -473,7 +473,7 @@ static int ar_do_ioctl(struct inode *inode, struct file *file, ar->line_bytes = AR_LINE_BYTES_QVGA; ar->mode = AR_MODE_INTERLACE; } - up(&ar->lock); + mutex_unlock(&ar->lock); return 0; } case VIDIOCGFBUF: @@ -562,8 +562,8 @@ static void ar_interrupt(int irq, void *dev, struct pt_regs *regs) /* operations for interlace mode */ if ( line_count < (AR_HEIGHT_VGA/2) ) /* even line */ line_number = (line_count << 1); - else /* odd line */ - line_number = + else /* odd line */ + line_number = (((line_count - (AR_HEIGHT_VGA/2)) << 1) + 1); } else { line_number = line_count; @@ -651,7 +651,7 @@ static int ar_initialize(struct video_device *dev) cr |= ARVCR1_NORMAL; ar_outl(cr, ARVCR1); - /* + /* * Initialize IIC so that CPU can communicate with AR LSI, * and send boot commands to AR LSI. */ @@ -734,7 +734,7 @@ static int ar_initialize(struct video_device *dev) void ar_release(struct video_device *vfd) { struct ar_device *ar = vfd->priv; - down(&ar->lock); + mutex_lock(&ar->lock); video_device_release(vfd); } @@ -824,7 +824,7 @@ static int __init ar_init(void) ar->line_bytes = AR_LINE_BYTES_QVGA; ar->mode = AR_MODE_INTERLACE; } - init_MUTEX(&ar->lock); + mutex_init(&ar->lock); init_waitqueue_head(&ar->wait); #if USE_INT @@ -846,7 +846,7 @@ static int __init ar_init(void) * so register video device as a frame grabber type. * device is named "video[0-64]". * video_register_device() initializes h/w using ar_initialize(). - */ + */ if (video_register_device(ar->vdev, VFL_TYPE_GRABBER, video_nr) != 0) { /* return -1, -ENFILE(full) or others */ printk("arv: register video (Colour AR) failed.\n"); diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index d6447791d0e5..e7b38fdd5e3c 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -1,4 +1,4 @@ -/* +/* * bt819 - BT819A VideoStream Decoder (Rockwell Part) * * Copyright (C) 1999 Mike Bernson <mike@mlb.org> @@ -6,7 +6,7 @@ * * Modifications for LML33/DC10plus unified driver * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> - * + * * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> * - moved over to linux>=2.4.x i2c protocol (9/9/2002) * @@ -53,7 +53,6 @@ MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(s) (s)->name @@ -141,24 +140,21 @@ bt819_write_block (struct i2c_client *client, if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { /* do raw I2C, not smbus compatible */ struct bt819 *decoder = i2c_get_clientdata(client); - struct i2c_msg msg; u8 block_data[32]; + int block_len; - msg.addr = client->addr; - msg.flags = 0; while (len >= 2) { - msg.buf = (char *) block_data; - msg.len = 0; - block_data[msg.len++] = reg = data[0]; + block_len = 0; + block_data[block_len++] = reg = data[0]; do { - block_data[msg.len++] = + block_data[block_len++] = decoder->reg[reg++] = data[1]; len -= 2; data += 2; } while (len >= 2 && data[0] == reg && - msg.len < 32); - if ((ret = i2c_transfer(client->adapter, - &msg, 1)) < 0) + block_len < 32); + if ((ret = i2c_master_send(client, block_data, + block_len)) < 0) break; } } else { @@ -210,9 +206,9 @@ bt819_init (struct i2c_client *client) Bug in the bt819 stepping on my board? */ 0x14, 0x00, /* 0x14 Vertial Scaling lsb */ - 0x16, 0x07, /* 0x16 Video Timing Polarity + 0x16, 0x07, /* 0x16 Video Timing Polarity ACTIVE=active low - FIELD: high=odd, + FIELD: high=odd, vreset=active high, hreset=active high */ 0x18, 0x68, /* 0x18 AGC Delay */ @@ -501,7 +497,7 @@ static unsigned short normal_i2c[] = { }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index 909b593530ed..af3b61d4fa7d 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -1,4 +1,4 @@ -/* +/* * bt856 - BT856A Digital Video Encoder (Rockwell Part) * * Copyright (C) 1999 Mike Bernson <mike@mlb.org> @@ -53,7 +53,6 @@ MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(s) (s)->name @@ -71,17 +70,14 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* ----------------------------------------------------------------------- */ -#define REG_OFFSET 0xCE +#define REG_OFFSET 0xDA +#define BT856_NR_REG 6 struct bt856 { - unsigned char reg[32]; + unsigned char reg[BT856_NR_REG]; int norm; int enable; - int bright; - int contrast; - int hue; - int sat; }; #define I2C_BT856 0x88 @@ -120,8 +116,8 @@ bt856_dump (struct i2c_client *client) struct bt856 *encoder = i2c_get_clientdata(client); printk(KERN_INFO "%s: register dump:", I2C_NAME(client)); - for (i = 0xd6; i <= 0xde; i += 2) - printk(" %02x", encoder->reg[i - REG_OFFSET]); + for (i = 0; i < BT856_NR_REG; i += 2) + printk(" %02x", encoder->reg[i]); printk("\n"); } @@ -289,7 +285,7 @@ bt856_command (struct i2c_client *client, static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig new file mode 100644 index 000000000000..085477c12612 --- /dev/null +++ b/drivers/media/video/bt8xx/Kconfig @@ -0,0 +1,25 @@ +config VIDEO_BT848 + tristate "BT848 Video For Linux" + depends on VIDEO_DEV && PCI && I2C + select I2C_ALGOBIT + select FW_LOADER + select VIDEO_BTCX + select VIDEO_BUF + select VIDEO_IR + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_MSP3400 + ---help--- + Support for BT848 based frame grabber/overlay boards. This includes + the Miro, Hauppauge and STB boards. Please read the material in + <file:Documentation/video4linux/bttv/> for more information. + + To compile this driver as a module, choose M here: the + module will be called bttv. + +config VIDEO_BT848_DVB + bool "DVB/ATSC Support for bt878 based TV cards" + depends on VIDEO_BT848 && DVB_CORE + select DVB_BT8XX + ---help--- + This adds support for DVB/ATSC cards based on the BT878 chip. diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile new file mode 100644 index 000000000000..94350f21cdc0 --- /dev/null +++ b/drivers/media/video/bt8xx/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the video capture/playback device drivers. +# + +bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ + bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \ + bttv-input.o + +obj-$(CONFIG_VIDEO_BT848) += bttv.o + +EXTRA_CFLAGS += -I$(src)/.. +EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core diff --git a/drivers/media/video/bt832.c b/drivers/media/video/bt8xx/bt832.c index cc54b62f4601..a51876137880 100644 --- a/drivers/media/video/bt832.c +++ b/drivers/media/video/bt8xx/bt832.c @@ -30,7 +30,6 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/slab.h> -#include <media/audiochip.h> #include <media/v4l2-common.h> #include "bttv.h" @@ -39,7 +38,7 @@ MODULE_LICENSE("GPL"); /* Addresses to scan */ -static unsigned short normal_i2c[] = { I2C_BT832_ALT1>>1, I2C_BT832_ALT2>>1, +static unsigned short normal_i2c[] = { I2C_ADDR_BT832_ALT1>>1, I2C_ADDR_BT832_ALT2>>1, I2C_CLIENT_END }; I2C_CLIENT_INSMOD; diff --git a/drivers/media/video/bt832.h b/drivers/media/video/bt8xx/bt832.h index 1ce8fa71f7db..1ce8fa71f7db 100644 --- a/drivers/media/video/bt832.h +++ b/drivers/media/video/bt8xx/bt832.h diff --git a/drivers/media/video/bt848.h b/drivers/media/video/bt8xx/bt848.h index 0bcd95303bb0..0bcd95303bb0 100644 --- a/drivers/media/video/bt848.h +++ b/drivers/media/video/bt8xx/bt848.h diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 9749d6ed6231..f209a7492051 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -39,6 +39,7 @@ #include "bttvp.h" #include <media/v4l2-common.h> +#include <media/tvaudio.h> /* fwd decl */ static void boot_msp34xx(struct bttv *btv, int pin); @@ -137,6 +138,8 @@ MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a li MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); MODULE_PARM_DESC(tuner,"specify installed tuner type"); MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)"); +MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" + " [some VIA/SIS chipsets are known to have problem with overlay]"); /* ----------------------------------------------------------------------- */ /* list of card IDs for bt878+ cards */ @@ -275,7 +278,6 @@ static struct CARD { { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" }, { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, - { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, @@ -297,13 +299,14 @@ static struct CARD { * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ /* DVB cards (using pci function .1 for mpeg data xfer) */ - { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, - { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, + { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, + { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, + { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, @@ -334,7 +337,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 0, 10 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -348,7 +352,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -362,7 +367,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 4, 0, 2, 3, 1 }, + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, @@ -381,7 +387,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = 4, .tuner_addr = ADDR_UNSET, @@ -395,7 +401,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0, 1, 0, 1, 3 }, + .gpiomux = { 0, 1, 0, 1 }, + .gpiomute = 3, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -409,7 +416,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .muxsel = { 2, 3, 1, 1 }, .gpiomask = 0x0f, - .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0 }, + .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, /* 0x04 for some cards ?? */ .needs_tvaudio = 1, .tuner_type = -1, @@ -426,7 +433,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -442,7 +449,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0 }, + .gpiomux = { 0, 0xc00, 0x800, 0x400 }, + .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -457,7 +465,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 1, 2, 3, 0 }, + .gpiomux = { 1, 1, 2, 3 }, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, @@ -472,7 +480,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x0f, /* old: 7 */ .muxsel = { 2, 0, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -487,7 +496,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3014f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20001,0x10001, 0, 0,10 }, + .gpiomux = { 0x20001,0x10001, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -503,7 +513,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 13, 14, 11, 7, 0, 0 }, + .gpiomux = { 13, 14, 11, 7 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -517,7 +527,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 13, 14, 11, 7, 0, 0 }, + .gpiomux = { 13, 14, 11, 7 }, .needs_tvaudio = 1, .msp34xx_alt = 1, .pll = PLL_28, @@ -535,7 +545,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 2, 1, 3, 4 }, /* old: {0, 1, 2, 3, 4} */ + .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ + .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -550,7 +561,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 , 0, 1 , 0, 10 }, + .gpiomux = { 0, 0, 1, 0 }, + .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -568,10 +580,11 @@ struct tvcard bttv_tvcards[] = { .muxsel = { 2, 3, 1, 1 }, #if 0 /* old */ - .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 }, + .gpiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000 }, #else /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ - .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, #endif .needs_tvaudio = 1, .pll = PLL_28, @@ -585,7 +598,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x8300f8, .muxsel = { 2, 3, 1, 1,0 }, - .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007 }, + .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, + .gpiomute = 0xcfa007, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -601,7 +615,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 0, 0, 0, 0 }, + .gpiomux = { 1, 0, 0, 0 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -615,7 +629,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0x8dff00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -642,7 +656,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -656,7 +671,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 0x800, 0x400, 0xc00, 0 }, + .gpiomux = { 0, 1, 0x800, 0x400 }, + .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -672,7 +688,7 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 7, .muxsel = { 2, 3, -1 }, .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0, 0, 0, 0, 0 }, + .gpiomux = { 0, 0, 0, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSBB5_PAL_I, @@ -689,7 +705,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00 }, + .gpiomux = {0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -705,7 +722,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000 }, + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -720,7 +738,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 7, .muxsel = { 2, 0, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -734,7 +753,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_SECAM, .tuner_addr = ADDR_UNSET, @@ -750,7 +770,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000 }, + .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, + .gpiomute = 0x40000, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -797,7 +818,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, /* was: 4 */ .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0}, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -813,7 +834,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, /* 0x8dfe00 */ .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 }, + .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -827,7 +849,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 1, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 0, 0, 0, 0 }, + .gpiomux = { 1, 0, 0, 0 }, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -843,7 +865,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = 4, .tuner_addr = ADDR_UNSET, @@ -857,7 +879,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xffff00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x500, 0, 0x300, 0x900, 0x900 }, + .gpiomux = { 0x500, 0, 0x300, 0x900 }, + .gpiomute = 0x900, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -873,11 +896,12 @@ struct tvcard bttv_tvcards[] = { .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */ #if 0 .gpiomask = 0xc33000, - .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 }, + .gpiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 }, #else /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ .gpiomask = 0xb33000, - .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 }, + .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, + .gpiomute = 0x800000, #endif /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) gpio23 -- hef4052:nEnable (0x800000) @@ -907,7 +931,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -923,7 +948,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -938,7 +964,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xff, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -953,7 +980,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x551e00, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 }, + .gpiomux = { 0x551400, 0x551200, 0, 0 }, + .gpiomute = 0x551c00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 1, @@ -969,7 +997,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0xd0001, 0, 0, 1 }, + .gpiomux = { 2, 0xd0001, 0, 0 }, + .gpiomute = 1, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = -1, @@ -986,7 +1015,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 4, 0, 2, 3, 1 }, + .gpiomux = { 4, 0, 2, 3 }, + .gpiomute = 1, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, @@ -1003,7 +1033,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 13, 4, 11, 7, 0, 0 }, + .gpiomux = { 13, 4, 11, 7 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -1020,7 +1050,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0, 0, 0, 0}, + .gpiomux = { 0, 0, 0, 0}, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, @@ -1036,7 +1066,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xe00b, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc }, + .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, + .gpiomute = 0xff3ffc, .no_msp34xx = 1, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -1052,7 +1083,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 1, 0, 2, 3 }, + .gpiomux = { 1, 1, 0, 2 }, + .gpiomute = 3, .no_msp34xx = 1, .pll = PLL_NONE, .tuner_type = -1, @@ -1067,7 +1099,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -1082,7 +1114,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xbcf03f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f }, + .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, + .gpiomute = 0xbcb03f, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = 21, @@ -1097,7 +1130,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x70000, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 }, + .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, + .gpiomute = 0x40000, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_35, @@ -1116,7 +1150,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = {2,0,0,0,1 }, + .gpiomux = {2,0,0,0 }, + .gpiomute = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -1131,7 +1166,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0 }, - .audiomux = {0x10000, 0, 0x10000, 0, 0, 0 }, + .gpiomux = {0x10000, 0, 0x10000, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSHC6_NTSC, @@ -1148,7 +1183,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0xAA0000, .muxsel = { 2,3,1,1,-1 }, .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 }, + .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, + .gpiomute = 0xa8000, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, @@ -1173,7 +1209,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 0, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .pll = PLL_28, .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */, .tuner_addr = ADDR_UNSET, @@ -1190,7 +1227,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 0xd0001, 0, 0, 10 }, + .gpiomux = { 1, 0xd0001, 0, 0 }, + .gpiomute = 10, /* sound path (5 sources): MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 0= ext. Audio IN @@ -1216,7 +1254,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1c, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0, 0x10, 8, 4 }, + .gpiomux = { 0, 0, 0x10, 8 }, + .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1228,7 +1267,7 @@ struct tvcard bttv_tvcards[] = { /* Tim Röstermundt <rosterm@uni-muenster.de> in de.comp.os.unix.linux.hardware: options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 - audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff + gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff options tuner type=5 */ .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", .video_inputs = 4, @@ -1237,7 +1276,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x18e0, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 }, + .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, + .gpiomute = 0x18e0, /* For cards with tda9820/tda9821: 0x0000: Tuner normal stereo 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) @@ -1257,7 +1297,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xF, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 2, 0, 0, 0, 10 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, @@ -1275,7 +1316,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, + .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, + .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = 5, .tuner_addr = ADDR_UNSET, @@ -1292,7 +1334,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, .gpiomask = 0, .muxsel = { 3, 1 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_35, @@ -1309,7 +1351,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 }, + .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, + .gpiomute = 0x800, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4036FY5_NTSC, @@ -1325,7 +1368,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 2, 0, 0, 0, 1 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, .pll = PLL_28, .tuner_type = 0, .tuner_addr = ADDR_UNSET, @@ -1342,7 +1386,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 11, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 1, 8 }, + .gpiomux = { 2, 0, 0, 1 }, + .gpiomute = 8, .pll = PLL_35, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, @@ -1357,7 +1402,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, .gpiomask = 0xF, .muxsel = { 2, 2 }, - .audiomux = { }, + .gpiomux = { }, .no_msp34xx = 1, .needs_tvaudio = 0, .pll = PLL_28, @@ -1376,7 +1421,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xFF, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 1, 0, 4, 4, 9 }, + .gpiomux = { 1, 0, 4, 4 }, + .gpiomute = 9, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1392,7 +1438,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xf03f, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe }, + .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, + .gpiomute = 0xbffe, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, .tuner_addr = ADDR_UNSET, @@ -1409,7 +1456,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 1, .muxsel = { 2, 3, 0, 1 }, - .audiomux = { 0, 0, 1, 0, 0 }, + .gpiomux = { 0, 0, 1, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, @@ -1428,7 +1475,8 @@ struct tvcard bttv_tvcards[] = { /* Radio changed from 1e80 to 0x800 to make FlyVideo2000S in .hu happy (gm)*/ /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ - .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 }, + .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, + .gpiomute = 0x1800, .audio_hook = fv2000s_audio, .no_msp34xx = 1, .no_tda9875 = 1, @@ -1446,7 +1494,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0xffff00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900 }, + .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, + .gpiomute = 0x900, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1463,7 +1512,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0 }, - .audiomux = {0x10000, 0, 0x10000, 0, 0, 0 }, + .gpiomux = {0x10000, 0, 0x10000, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, @@ -1484,7 +1533,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x4f8a00, /* 0x100000: 1=MSP enabled (0=disable again) * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ - .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff}, + .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, + .gpiomute = 0x947fff, /* tvtuner, radio, external,internal, mute, stereo * tuner, Composit, SVid, Composit-on-Svid-adapter */ .muxsel = { 2, 3 ,0 ,1 }, @@ -1516,7 +1566,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0, 11, 7, 13, 0 }, /* TV and Radio with same GPIO ! */ + .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ + .gpiomute = 13, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 25, @@ -1555,7 +1606,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 }, + .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, + .gpiomute = 0x09, .needs_tvaudio = 1, .no_msp34xx = 1, .no_tda9875 = 1, @@ -1584,7 +1636,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 4, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = -1, .tuner_addr = ADDR_UNSET, @@ -1616,7 +1668,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ .muxsel = { 2, 1, 1, }, - .audiomux = { 0, 1, 2, 2, 4 }, + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 4, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1635,7 +1688,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x140007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4, 0 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -1649,7 +1703,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -1665,13 +1719,14 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */ - .audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio! + .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! * This card lacks external Audio In, so we mute it on Ext. & Int. * The PCB can take a sbx1637/sbx1673, wiring unknown. * This card lacks PCI subsystem ID, sigh. - * audiomux=1: lower volume, 2+3: mute + * gpiomux =1: lower volume, 2+3: mute * btwincap uses 0x80000/0x80003 */ + .gpiomute = 4, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -1718,7 +1773,7 @@ struct tvcard bttv_tvcards[] = { .radio_addr = ADDR_UNSET, .gpiomask = 7, - .audiomux = {7}, + .gpiomux = {7}, }, [BTTV_BOARD_GVBCTV5PCI] = { .name = "IODATA GV-BCTV5/PCI", @@ -1728,7 +1783,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x0f0f80, .muxsel = {2, 3, 1, 0 }, - .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0}, + .gpiomux = {0x030000, 0x010000, 0, 0 }, + .gpiomute = 0x020000, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC_M, @@ -1958,7 +2014,7 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 2, /* TV, Comp1, Composite over SVID con, SVID */ .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 2, 0, 0, 0 }, + .gpiomux = { 2, 2, 0, 0 }, .pll = PLL_28, .has_radio = 1, .tuner_type = TUNER_PHILIPS_PAL, @@ -1982,7 +2038,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 1, 2, 3, 4}, + .gpiomux = { 0, 1, 2, 3}, + .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = 5, .tuner_addr = ADDR_UNSET, @@ -2014,7 +2071,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -2033,7 +2090,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x001e8007, .muxsel = { 2, 3, 1, 0 }, /* Tuner, Radio, external, internal, off, on */ - .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 }, + .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, + .gpiomute = 0x0f, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -2150,7 +2208,7 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0 }, + .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, @@ -2167,7 +2225,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2182,7 +2240,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2202,7 +2260,7 @@ struct tvcard bttv_tvcards[] = { via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2220,7 +2278,7 @@ struct tvcard bttv_tvcards[] = { via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = -1, @@ -2308,7 +2366,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 1, 1, 1, 1, 0 }, + .gpiomux = { 1, 1, 1, 1 }, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2339,7 +2397,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x008007, .muxsel = { 2, 3, 0, 0 }, - .audiomux = { 0, 0, 0, 0, 0x000003, 0 }, + .gpiomux = { 0, 0, 0, 0 }, + .gpiomute = 0x000003, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -2375,7 +2434,7 @@ struct tvcard bttv_tvcards[] = { .needs_tvaudio = 0, .gpiomask = 0x68, .muxsel = { 2, 3, 1 }, - .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 }, + .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, .pll = PLL_28, }, @@ -2390,7 +2449,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x008007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 2, 3 }, + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -2415,7 +2475,7 @@ struct tvcard bttv_tvcards[] = { .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/ - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .pll = PLL_28, .needs_tvaudio = 0, .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ @@ -2433,7 +2493,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x0000000f, .muxsel = { 2, 1, 1 }, - .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00 }, + .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -2489,7 +2549,7 @@ struct tvcard bttv_tvcards[] = { .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 }, .muxsel_hook = sigmaSQ_muxsel, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -2506,7 +2566,7 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x0, .muxsel = { 2, 2, 2, 2 }, .muxsel_hook = sigmaSLC_muxsel, - .audiomux = { 0 }, + .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = -1, @@ -2524,7 +2584,8 @@ struct tvcard bttv_tvcards[] = { .svhs = -1, .gpiomask = 0xFF, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 0, 10 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 10, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -2558,7 +2619,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3f, .muxsel = {2, 3, 1, 0 }, - .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31 }, + .gpiomux = {0x31, 0x31, 0x31, 0x31 }, + .gpiomute = 0x31, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC_M, @@ -2581,7 +2643,7 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x008007, - .audiomux = { 0, 0x000001,0,0, 0 }, + .gpiomux = { 0, 0x000001,0,0 }, .needs_tvaudio = 1, .has_radio = 1, }, @@ -2691,7 +2753,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .muxsel = { 2, 3, 1 }, .gpiomask = 0x00e00007, - .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 }, + .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, + .gpiomute = 0x00c00007, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, @@ -2707,7 +2770,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x01fe00, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, + .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, + .gpiomute = 0x002000, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, @@ -2724,7 +2788,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x001c0007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 2, 3 }, + .gpiomux = { 0, 1, 2, 2 }, + .gpiomute = 3, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TENA_9533_DI, @@ -2743,7 +2808,8 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x01fe00, .muxsel = { 2,3,1,1,-1 }, .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000 }, + .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, + .gpiomute = 0x12400, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_LG_PAL_FM, @@ -2761,7 +2827,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x3f, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, + .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, + .gpiomute = 0x29, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF_5533MF, @@ -2795,7 +2862,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 2, 0, 0, 0, 1 }, + .gpiomux = { 2, 0, 0, 0 }, + .gpiomute = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = 2, @@ -2811,7 +2879,7 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0x108007, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 100000, 100002, 100002, 100000 }, + .gpiomux = { 100000, 100002, 100002, 100000 }, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, @@ -2851,7 +2919,8 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4 }, + .gpiomux = { 0, 1, 2, 3 }, + .gpiomute = 4, .tuner_type = TUNER_TEMIC_4009FR5_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -2923,20 +2992,20 @@ void __devinit bttv_idcard(struct bttv *btv) if (UNSET != audiomux[0]) { gpiobits = 0; for (i = 0; i < 5; i++) { - bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i]; + bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; gpiobits |= audiomux[i]; } } else { gpiobits = audioall; for (i = 0; i < 5; i++) { - bttv_tvcards[btv->c.type].audiomux[i] = audioall; + bttv_tvcards[btv->c.type].gpiomux[i] = audioall; } } bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=", btv->c.nr,bttv_tvcards[btv->c.type].gpiomask); for (i = 0; i < 5; i++) { - printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]); + printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); } printk("\n"); } @@ -3044,7 +3113,7 @@ static void miro_pinnacle_gpio(struct bttv *btv) gpio_inout(0xffffff, 0); gpio = gpio_read(); id = ((gpio>>10) & 63) -1; - msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx"); + msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); if (id < 32) { btv->tuner_type = miro_tunermap[id]; if (0 == (gpio & 0x20)) { @@ -3440,8 +3509,8 @@ void __devinit bttv_init_card2(struct bttv *btv) if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) { /* detect Bt832 chip for quartzsight digital camera */ - if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) || - (bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0)) + if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) || + (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0)) boot_bt832(btv); } @@ -3450,19 +3519,19 @@ void __devinit bttv_init_card2(struct bttv *btv) /* try to detect audio/fader chips */ if (!bttv_tvcards[btv->c.type].no_msp34xx && - bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0) + bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0) request_module("msp3400"); if (bttv_tvcards[btv->c.type].msp34xx_alt && - bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0) + bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0) request_module("msp3400"); if (!bttv_tvcards[btv->c.type].no_tda9875 && - bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0) + bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0) request_module("tda9875"); if (!bttv_tvcards[btv->c.type].no_tda7432 && - bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0) + bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0) request_module("tda7432"); if (bttv_tvcards[btv->c.type].needs_tvaudio) @@ -3473,7 +3542,7 @@ void __devinit bttv_init_card2(struct bttv *btv) if (btv->tda9887_conf) tda9887 = 1; if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb && - bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0) + bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0) tda9887 = 1; /* Hybrid DVB card, DOES have a tda9887 */ if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE) @@ -3794,18 +3863,18 @@ void bttv_tda9880_setnorm(struct bttv *btv, int norm) { /* fix up our card entry */ if(norm==VIDEO_MODE_NTSC) { - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff; - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff; dprintk("bttv_tda9880_setnorm to NTSC\n"); } else { - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff; - bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff; dprintk("bttv_tda9880_setnorm to PAL\n"); } /* set GPIO according */ gpio_bits(bttv_tvcards[btv->c.type].gpiomask, - bttv_tvcards[btv->c.type].audiomux[btv->audio]); + bttv_tvcards[btv->c.type].gpiomux[btv->audio]); } @@ -4944,12 +5013,14 @@ void __devinit bttv_check_chipset(void) if (vsfx) printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n"); if (pcipci_fail) { - printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n"); + printk(KERN_INFO "bttv: bttv and your chipset may not work " + "together.\n"); if (!no_overlay) { - printk(KERN_WARNING "bttv: overlay will be disabled.\n"); + printk(KERN_INFO "bttv: overlay will be disabled.\n"); no_overlay = 1; } else { - printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n"); + printk(KERN_INFO "bttv: overlay forced. Use this " + "option at your own risk.\n"); } } if (UNSET != latency) diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 578b20085082..74def9c23952 100644 --- a/drivers/media/video/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -36,13 +36,15 @@ #include <linux/kdev_t.h> #include "bttvp.h" #include <media/v4l2-common.h> +#include <media/tvaudio.h> +#include <media/msp3400.h> #include <linux/dma-mapping.h> #include <asm/io.h> #include <asm/byteorder.h> -#include "rds.h" +#include <media/rds.h> unsigned int bttv_num; /* number of Bt848s in use */ @@ -926,45 +928,98 @@ video_mux(struct bttv *btv, unsigned int input) static char *audio_modes[] = { "audio: tuner", "audio: radio", "audio: extern", - "audio: intern", "audio: off" + "audio: intern", "audio: mute" }; static int -audio_mux(struct bttv *btv, int mode) +audio_mux(struct bttv *btv, int input, int mute) { - int val,mux,i2c_mux,signal; + int gpio_val, signal; + struct v4l2_control ctrl; + struct i2c_client *c; gpio_inout(bttv_tvcards[btv->c.type].gpiomask, bttv_tvcards[btv->c.type].gpiomask); signal = btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC; - switch (mode) { - case AUDIO_MUTE: - btv->audio |= AUDIO_MUTE; - break; - case AUDIO_UNMUTE: - btv->audio &= ~AUDIO_MUTE; - break; - case AUDIO_TUNER: - case AUDIO_RADIO: - case AUDIO_EXTERN: - case AUDIO_INTERN: - btv->audio &= AUDIO_MUTE; - btv->audio |= mode; - } - i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio; - if (btv->opt_automute && !signal && !btv->radio_user) - mux = AUDIO_OFF; - - val = bttv_tvcards[btv->c.type].audiomux[mux]; - gpio_bits(bttv_tvcards[btv->c.type].gpiomask,val); + btv->mute = mute; + btv->audio = input; + + /* automute */ + mute = mute || (btv->opt_automute && !signal && !btv->radio_user); + + if (mute) + gpio_val = bttv_tvcards[btv->c.type].gpiomute; + else + gpio_val = bttv_tvcards[btv->c.type].gpiomux[input]; + + gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpio_val); if (bttv_gpio) - bttv_gpio_tracking(btv,audio_modes[mux]); - if (!in_interrupt()) - bttv_call_i2c_clients(btv,AUDC_SET_INPUT,&(i2c_mux)); + bttv_gpio_tracking(btv, audio_modes[mute ? 4 : input]); + if (in_interrupt()) + return 0; + + ctrl.id = V4L2_CID_AUDIO_MUTE; + ctrl.value = btv->mute; + bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, &ctrl); + c = btv->i2c_msp34xx_client; + if (c) { + struct v4l2_routing route; + + /* Note: the inputs tuner/radio/extern/intern are translated + to msp routings. This assumes common behavior for all msp3400 + based TV cards. When this assumption fails, then the + specific MSP routing must be added to the card table. + For now this is sufficient. */ + switch (input) { + case TVAUDIO_INPUT_RADIO: + route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_EXTERN: + route.input = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_INTERN: + /* Yes, this is the same input as for RADIO. I doubt + if this is ever used. The only board with an INTERN + input is the BTTV_BOARD_AVERMEDIA98. I wonder how + that was tested. My guess is that the whole INTERN + input does not work. */ + route.input = MSP_INPUT(MSP_IN_SCART_2, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART); + break; + case TVAUDIO_INPUT_TUNER: + default: + route.input = MSP_INPUT_DEFAULT; + break; + } + route.output = MSP_OUTPUT_DEFAULT; + c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route); + } + c = btv->i2c_tvaudio_client; + if (c) { + struct v4l2_routing route; + + route.input = input; + route.output = 0; + c->driver->command(c, VIDIOC_INT_S_AUDIO_ROUTING, &route); + } return 0; } +static inline int +audio_mute(struct bttv *btv, int mute) +{ + return audio_mux(btv, btv->audio, mute); +} + +static inline int +audio_input(struct bttv *btv, int input) +{ + return audio_mux(btv, input, btv->mute); +} + static void i2c_vidiocschan(struct bttv *btv) { @@ -1023,8 +1078,8 @@ set_input(struct bttv *btv, unsigned int input) } else { video_mux(btv,input); } - audio_mux(btv,(input == bttv_tvcards[btv->c.type].tuner ? - AUDIO_TUNER : AUDIO_EXTERN)); + audio_input(btv,(input == bttv_tvcards[btv->c.type].tuner ? + TVAUDIO_INPUT_TUNER : TVAUDIO_INPUT_EXTERN)); set_tvnorm(btv,btv->tvnorm); i2c_vidiocschan(btv); } @@ -1236,10 +1291,10 @@ static int set_control(struct bttv *btv, struct v4l2_control *c) case V4L2_CID_AUDIO_MUTE: if (c->value) { va.flags |= VIDEO_AUDIO_MUTE; - audio_mux(btv, AUDIO_MUTE); + audio_mute(btv, 1); } else { va.flags &= ~VIDEO_AUDIO_MUTE; - audio_mux(btv, AUDIO_UNMUTE); + audio_mute(btv, 0); } break; @@ -1397,7 +1452,7 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh, free_btres(btv,fh,RESOURCE_OVERLAY); if (NULL != old) { dprintk("switch_overlay: old=%p state is %d\n",old,old->vb.state); - bttv_dma_free(btv, old); + bttv_dma_free(&fh->cap,btv, old); kfree(old); } dprintk("switch_overlay: done\n"); @@ -1407,7 +1462,8 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh, /* ----------------------------------------------------------------------- */ /* video4linux (1) interface */ -static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf, +static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv, + struct bttv_buffer *buf, const struct bttv_format *fmt, unsigned int width, unsigned int height, enum v4l2_field field) @@ -1450,7 +1506,7 @@ static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf, /* alloc risc memory */ if (STATE_NEEDS_INIT == buf->vb.state) { redo_dma_risc = 1; - if (0 != (rc = videobuf_iolock(btv->c.pci,&buf->vb,&btv->fbuf))) + if (0 != (rc = videobuf_iolock(q,&buf->vb,&btv->fbuf))) goto fail; } @@ -1462,7 +1518,7 @@ static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf, return 0; fail: - bttv_dma_free(btv,buf); + bttv_dma_free(q,btv,buf); return rc; } @@ -1486,7 +1542,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); struct bttv_fh *fh = q->priv_data; - return bttv_prepare_buffer(fh->btv, buf, fh->fmt, + return bttv_prepare_buffer(q,fh->btv, buf, fh->fmt, fh->width, fh->height, field); } @@ -1510,7 +1566,7 @@ static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); struct bttv_fh *fh = q->priv_data; - bttv_dma_free(fh->btv,buf); + bttv_dma_free(&fh->cap,fh->btv,buf); } static struct videobuf_queue_ops bttv_video_qops = { @@ -1653,7 +1709,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) return -EINVAL; mutex_lock(&btv->lock); - audio_mux(btv, (v->flags&VIDEO_AUDIO_MUTE) ? AUDIO_MUTE : AUDIO_UNMUTE); + audio_mute(btv, (v->flags&VIDEO_AUDIO_MUTE) ? 1 : 0); bttv_call_i2c_clients(btv,cmd,v); /* card specific hooks */ @@ -1822,7 +1878,8 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) bttv_call_i2c_clients(btv, VIDIOCGAUDIO, &va); if (t->audmode == V4L2_TUNER_MODE_MONO) va.mode = VIDEO_SOUND_MONO; - else if (t->audmode == V4L2_TUNER_MODE_STEREO) + else if (t->audmode == V4L2_TUNER_MODE_STEREO || + t->audmode == V4L2_TUNER_MODE_LANG1_LANG2) va.mode = VIDEO_SOUND_STEREO; else if (t->audmode == V4L2_TUNER_MODE_LANG1) va.mode = VIDEO_SOUND_LANG1; @@ -1965,7 +2022,7 @@ static int setup_window(struct bttv_fh *fh, struct bttv *btv, BUG(); } - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); kfree(fh->ov.clips); fh->ov.clips = clips; fh->ov.nclips = n; @@ -1986,7 +2043,7 @@ static int setup_window(struct bttv_fh *fh, struct bttv *btv, bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); retval = bttv_switch_overlay(btv,fh,new); } - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return retval; } @@ -2166,7 +2223,7 @@ static int bttv_s_fmt(struct bttv_fh *fh, struct bttv *btv, fmt = format_by_fourcc(f->fmt.pix.pixelformat); /* update our state informations */ - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); fh->fmt = fmt; fh->cap.field = f->fmt.pix.field; fh->cap.last = V4L2_FIELD_NONE; @@ -2175,7 +2232,7 @@ static int bttv_s_fmt(struct bttv_fh *fh, struct bttv *btv, btv->init.fmt = fmt; btv->init.width = f->fmt.pix.width; btv->init.height = f->fmt.pix.height; - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return 0; } @@ -2282,7 +2339,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, fmt = format_by_palette(pic->palette); if (NULL == fmt) return -EINVAL; - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); if (fmt->depth != pic->depth) { retval = -EINVAL; goto fh_unlock_and_return; @@ -2313,7 +2370,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, bt848_contrast(btv,pic->contrast); bt848_hue(btv,pic->hue); bt848_sat(btv,pic->colour); - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return 0; } @@ -2379,7 +2436,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, return -EPERM; end = (unsigned long)fbuf->base + fbuf->height * fbuf->bytesperline; - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); retval = -EINVAL; switch (fbuf->depth) { @@ -2417,7 +2474,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, btv->fbuf.fmt.bytesperline = fbuf->bytesperline; else btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fbuf->depth/8; - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return 0; } @@ -2440,7 +2497,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, if (!check_alloc_btres(btv,fh,RESOURCE_OVERLAY)) return -EBUSY; - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); if (*on) { fh->ov.tvnorm = btv->tvnorm; new = videobuf_alloc(sizeof(*new)); @@ -2451,7 +2508,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, /* switch over */ retval = bttv_switch_overlay(btv,fh,new); - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return retval; } @@ -2460,7 +2517,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, struct video_mbuf *mbuf = arg; unsigned int i; - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); retval = videobuf_mmap_setup(&fh->cap,gbuffers,gbufsize, V4L2_MEMORY_MMAP); if (retval < 0) @@ -2470,7 +2527,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, mbuf->size = gbuffers * gbufsize; for (i = 0; i < gbuffers; i++) mbuf->offsets[i] = i * gbufsize; - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return 0; } case VIDIOCMCAPTURE: @@ -2482,7 +2539,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, if (vm->frame >= VIDEO_MAX_FRAME) return -EINVAL; - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); retval = -EINVAL; buf = (struct bttv_buffer *)fh->cap.bufs[vm->frame]; if (NULL == buf) @@ -2496,7 +2553,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, field = (vm->height > bttv_tvnorms[btv->tvnorm].sheight/2) ? V4L2_FIELD_INTERLACED : V4L2_FIELD_BOTTOM; - retval = bttv_prepare_buffer(btv,buf, + retval = bttv_prepare_buffer(&fh->cap,btv,buf, format_by_palette(vm->format), vm->width,vm->height,field); if (0 != retval) @@ -2504,7 +2561,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, spin_lock_irqsave(&btv->s_lock,flags); buffer_queue(&fh->cap,&buf->vb); spin_unlock_irqrestore(&btv->s_lock,flags); - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return 0; } case VIDIOCSYNC: @@ -2515,7 +2572,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, if (*frame >= VIDEO_MAX_FRAME) return -EINVAL; - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); retval = -EINVAL; buf = (struct bttv_buffer *)fh->cap.bufs[*frame]; if (NULL == buf) @@ -2528,14 +2585,14 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, retval = -EIO; /* fall through */ case STATE_DONE: - videobuf_dma_pci_sync(btv->c.pci,&buf->vb.dma); - bttv_dma_free(btv,buf); + videobuf_dma_sync(&fh->cap,&buf->vb.dma); + bttv_dma_free(&fh->cap,btv,buf); break; default: retval = -EINVAL; break; } - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return retval; } @@ -2719,7 +2776,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, if (0 == (fmt->flags & FORMAT_FLAGS_PACKED)) return -EINVAL; - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); retval = -EINVAL; if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { if (fb->fmt.width > bttv_tvnorms[btv->tvnorm].swidth) @@ -2759,7 +2816,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, retval = bttv_switch_overlay(btv,fh,new); } } - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return retval; } @@ -2890,7 +2947,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, return 0; fh_unlock_and_return: - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return retval; } @@ -2957,16 +3014,16 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) buf = list_entry(fh->cap.stream.next,struct bttv_buffer,vb.stream); } else { /* read() capture */ - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); if (NULL == fh->cap.read_buf) { /* need to capture a new frame */ if (locked_btres(fh->btv,RESOURCE_VIDEO)) { - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return POLLERR; } fh->cap.read_buf = videobuf_alloc(fh->cap.msize); if (NULL == fh->cap.read_buf) { - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return POLLERR; } fh->cap.read_buf->memory = V4L2_MEMORY_USERPTR; @@ -2974,13 +3031,13 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait) if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,field)) { kfree (fh->cap.read_buf); fh->cap.read_buf = NULL; - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return POLLERR; } fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); fh->cap.read_off = 0; } - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); buf = (struct bttv_buffer*)fh->cap.read_buf; } @@ -3162,8 +3219,8 @@ static int radio_open(struct inode *inode, struct file *file) file->private_data = btv; - bttv_call_i2c_clients(btv,AUDC_SET_RADIO,&btv->tuner_type); - audio_mux(btv,AUDIO_RADIO); + bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL); + audio_input(btv,TVAUDIO_INPUT_RADIO); mutex_unlock(&btv->lock); return 0; @@ -3749,7 +3806,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) bttv_irq_switch_video(btv); if ((astat & BT848_INT_HLOCK) && btv->opt_automute) - audio_mux(btv, -1); + audio_mute(btv, btv->mute); /* trigger automute */ if (astat & (BT848_INT_SCERR|BT848_INT_OCERR)) { printk(KERN_INFO "bttv%d: %s%s @ %08x,",btv->c.nr, @@ -4050,7 +4107,7 @@ static int __devinit bttv_probe(struct pci_dev *dev, bt848_contrast(btv,32768); bt848_hue(btv,32768); bt848_sat(btv,32768); - audio_mux(btv,AUDIO_MUTE); + audio_mute(btv, 1); set_input(btv,0); } diff --git a/drivers/media/video/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c index c4d5e2b70c28..c4d5e2b70c28 100644 --- a/drivers/media/video/bttv-gpio.c +++ b/drivers/media/video/bt8xx/bttv-gpio.c diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c index 614c12018557..4b562b386fcf 100644 --- a/drivers/media/video/bttv-i2c.c +++ b/drivers/media/video/bt8xx/bttv-i2c.c @@ -302,6 +302,10 @@ static int attach_inform(struct i2c_client *client) if (!client->driver->command) return 0; + if (client->driver->id == I2C_DRIVERID_MSP3400) + btv->i2c_msp34xx_client = client; + if (client->driver->id == I2C_DRIVERID_TVAUDIO) + btv->i2c_tvaudio_client = client; if (btv->tuner_type != UNSET) { struct tuner_setup tun_setup; diff --git a/drivers/media/video/bttv-if.c b/drivers/media/video/bt8xx/bttv-if.c index 19b564ab0e92..19b564ab0e92 100644 --- a/drivers/media/video/bttv-if.c +++ b/drivers/media/video/bt8xx/bttv-if.c diff --git a/drivers/media/video/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index 221b36e7f392..69efa0e5174d 100644 --- a/drivers/media/video/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -28,251 +28,6 @@ #include "bttv.h" #include "bttvp.h" -/* ---------------------------------------------------------------------- */ - -static IR_KEYTAB_TYPE ir_codes_avermedia[IR_KEYTAB_SIZE] = { - [ 34 ] = KEY_KP0, - [ 40 ] = KEY_KP1, - [ 24 ] = KEY_KP2, - [ 56 ] = KEY_KP3, - [ 36 ] = KEY_KP4, - [ 20 ] = KEY_KP5, - [ 52 ] = KEY_KP6, - [ 44 ] = KEY_KP7, - [ 28 ] = KEY_KP8, - [ 60 ] = KEY_KP9, - - [ 48 ] = KEY_EJECTCD, // Unmarked on my controller - [ 0 ] = KEY_POWER, - [ 18 ] = BTN_LEFT, // DISPLAY/L - [ 50 ] = BTN_RIGHT, // LOOP/R - [ 10 ] = KEY_MUTE, - [ 38 ] = KEY_RECORD, - [ 22 ] = KEY_PAUSE, - [ 54 ] = KEY_STOP, - [ 30 ] = KEY_VOLUMEDOWN, - [ 62 ] = KEY_VOLUMEUP, - - [ 32 ] = KEY_TUNER, // TV/FM - [ 16 ] = KEY_CD, - [ 8 ] = KEY_VIDEO, - [ 4 ] = KEY_AUDIO, - [ 12 ] = KEY_ZOOM, // full screen - [ 2 ] = KEY_INFO, // preview - [ 42 ] = KEY_SEARCH, // autoscan - [ 26 ] = KEY_STOP, // freeze - [ 58 ] = KEY_RECORD, // capture - [ 6 ] = KEY_PLAY, // unmarked - [ 46 ] = KEY_RED, // unmarked - [ 14 ] = KEY_GREEN, // unmarked - - [ 33 ] = KEY_YELLOW, // unmarked - [ 17 ] = KEY_CHANNELDOWN, - [ 49 ] = KEY_CHANNELUP, - [ 1 ] = KEY_BLUE, // unmarked -}; - -/* Matt Jesson <dvb@jesson.eclipse.co.uk */ -static IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE] = { - [ 0x28 ] = KEY_KP0, //'0' / 'enter' - [ 0x22 ] = KEY_KP1, //'1' - [ 0x12 ] = KEY_KP2, //'2' / 'up arrow' - [ 0x32 ] = KEY_KP3, //'3' - [ 0x24 ] = KEY_KP4, //'4' / 'left arrow' - [ 0x14 ] = KEY_KP5, //'5' - [ 0x34 ] = KEY_KP6, //'6' / 'right arrow' - [ 0x26 ] = KEY_KP7, //'7' - [ 0x16 ] = KEY_KP8, //'8' / 'down arrow' - [ 0x36 ] = KEY_KP9, //'9' - - [ 0x20 ] = KEY_LIST, // 'source' - [ 0x10 ] = KEY_TEXT, // 'teletext' - [ 0x00 ] = KEY_POWER, // 'power' - [ 0x04 ] = KEY_AUDIO, // 'audio' - [ 0x06 ] = KEY_ZOOM, // 'full screen' - [ 0x18 ] = KEY_VIDEO, // 'display' - [ 0x38 ] = KEY_SEARCH, // 'loop' - [ 0x08 ] = KEY_INFO, // 'preview' - [ 0x2a ] = KEY_REWIND, // 'backward <<' - [ 0x1a ] = KEY_FASTFORWARD, // 'forward >>' - [ 0x3a ] = KEY_RECORD, // 'capture' - [ 0x0a ] = KEY_MUTE, // 'mute' - [ 0x2c ] = KEY_RECORD, // 'record' - [ 0x1c ] = KEY_PAUSE, // 'pause' - [ 0x3c ] = KEY_STOP, // 'stop' - [ 0x0c ] = KEY_PLAY, // 'play' - [ 0x2e ] = KEY_RED, // 'red' - [ 0x01 ] = KEY_BLUE, // 'blue' / 'cancel' - [ 0x0e ] = KEY_YELLOW, // 'yellow' / 'ok' - [ 0x21 ] = KEY_GREEN, // 'green' - [ 0x11 ] = KEY_CHANNELDOWN, // 'channel -' - [ 0x31 ] = KEY_CHANNELUP, // 'channel +' - [ 0x1e ] = KEY_VOLUMEDOWN, // 'volume -' - [ 0x3e ] = KEY_VOLUMEUP, // 'volume +' -}; - -/* Attila Kondoros <attila.kondoros@chello.hu> */ -static IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { - - [ 1 ] = KEY_KP1, - [ 2 ] = KEY_KP2, - [ 3 ] = KEY_KP3, - [ 4 ] = KEY_KP4, - [ 5 ] = KEY_KP5, - [ 6 ] = KEY_KP6, - [ 7 ] = KEY_KP7, - [ 8 ] = KEY_KP8, - [ 9 ] = KEY_KP9, - [ 0 ] = KEY_KP0, - [ 23 ] = KEY_LAST, // +100 - [ 10 ] = KEY_LIST, // recall - - - [ 28 ] = KEY_TUNER, // TV/FM - [ 21 ] = KEY_SEARCH, // scan - [ 18 ] = KEY_POWER, // power - [ 31 ] = KEY_VOLUMEDOWN, // vol up - [ 27 ] = KEY_VOLUMEUP, // vol down - [ 30 ] = KEY_CHANNELDOWN, // chn up - [ 26 ] = KEY_CHANNELUP, // chn down - - [ 17 ] = KEY_VIDEO, // video - [ 15 ] = KEY_ZOOM, // full screen - [ 19 ] = KEY_MUTE, // mute/unmute - [ 16 ] = KEY_TEXT, // min - - [ 13 ] = KEY_STOP, // freeze - [ 14 ] = KEY_RECORD, // record - [ 29 ] = KEY_PLAYPAUSE, // stop - [ 25 ] = KEY_PLAY, // play - - [ 22 ] = KEY_GOTO, // osd - [ 20 ] = KEY_REFRESH, // default - [ 12 ] = KEY_KPPLUS, // fine tune >>>> - [ 24 ] = KEY_KPMINUS // fine tune <<<< -}; - -/* ---------------------------------------------------------------------- */ - -static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = { - - [ 30 ] = KEY_POWER, // power - [ 7 ] = KEY_MEDIA, // source - [ 28 ] = KEY_SEARCH, // scan - -/* FIXME: duplicate keycodes? - * - * These four keys seem to share the same GPIO as CH+, CH-, <<< and >>> - * The GPIO values are - * 6397fb for both "Scan <" and "CH -", - * 639ffb for "Scan >" and "CH+", - * 6384fb for "Tune <" and "<<<", - * 638cfb for "Tune >" and ">>>", regardless of the mask. - * - * [ 23 ] = KEY_BACK, // fm scan << - * [ 31 ] = KEY_FORWARD, // fm scan >> - * - * [ 4 ] = KEY_LEFT, // fm tuning < - * [ 12 ] = KEY_RIGHT, // fm tuning > - * - * For now, these four keys are disabled. Pressing them will generate - * the CH+/CH-/<<</>>> events - */ - - [ 3 ] = KEY_TUNER, // TV/FM - - [ 0 ] = KEY_RECORD, - [ 8 ] = KEY_STOP, - [ 17 ] = KEY_PLAY, - - [ 26 ] = KEY_PLAYPAUSE, // freeze - [ 25 ] = KEY_ZOOM, // zoom - [ 15 ] = KEY_TEXT, // min - - [ 1 ] = KEY_KP1, - [ 11 ] = KEY_KP2, - [ 27 ] = KEY_KP3, - [ 5 ] = KEY_KP4, - [ 9 ] = KEY_KP5, - [ 21 ] = KEY_KP6, - [ 6 ] = KEY_KP7, - [ 10 ] = KEY_KP8, - [ 18 ] = KEY_KP9, - [ 2 ] = KEY_KP0, - [ 16 ] = KEY_LAST, // +100 - [ 19 ] = KEY_LIST, // recall - - [ 31 ] = KEY_CHANNELUP, // chn down - [ 23 ] = KEY_CHANNELDOWN, // chn up - [ 22 ] = KEY_VOLUMEUP, // vol down - [ 20 ] = KEY_VOLUMEDOWN, // vol up - - [ 4 ] = KEY_KPMINUS, // <<< - [ 14 ] = KEY_SETUP, // function - [ 12 ] = KEY_KPPLUS, // >>> - - [ 13 ] = KEY_GOTO, // mts - [ 29 ] = KEY_REFRESH, // reset - [ 24 ] = KEY_MUTE // mute/unmute -}; - -static IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = { - [0x00] = KEY_KP0, - [0x01] = KEY_KP1, - [0x02] = KEY_KP2, - [0x03] = KEY_KP3, - [0x04] = KEY_KP4, - [0x05] = KEY_KP5, - [0x06] = KEY_KP6, - [0x07] = KEY_KP7, - [0x08] = KEY_KP8, - [0x09] = KEY_KP9, - [0x0a] = KEY_TV, - [0x0b] = KEY_AUX, - [0x0c] = KEY_DVD, - [0x0d] = KEY_POWER, - [0x0e] = KEY_MHP, /* labelled 'Picture' */ - [0x0f] = KEY_AUDIO, - [0x10] = KEY_INFO, - [0x11] = KEY_F13, /* 16:9 */ - [0x12] = KEY_F14, /* 14:9 */ - [0x13] = KEY_EPG, - [0x14] = KEY_EXIT, - [0x15] = KEY_MENU, - [0x16] = KEY_UP, - [0x17] = KEY_DOWN, - [0x18] = KEY_LEFT, - [0x19] = KEY_RIGHT, - [0x1a] = KEY_ENTER, - [0x1b] = KEY_CHANNELUP, - [0x1c] = KEY_CHANNELDOWN, - [0x1d] = KEY_VOLUMEUP, - [0x1e] = KEY_VOLUMEDOWN, - [0x1f] = KEY_RED, - [0x20] = KEY_GREEN, - [0x21] = KEY_YELLOW, - [0x22] = KEY_BLUE, - [0x23] = KEY_SUBTITLE, - [0x24] = KEY_F15, /* AD */ - [0x25] = KEY_TEXT, - [0x26] = KEY_MUTE, - [0x27] = KEY_REWIND, - [0x28] = KEY_STOP, - [0x29] = KEY_PLAY, - [0x2a] = KEY_FASTFORWARD, - [0x2b] = KEY_F16, /* chapter */ - [0x2c] = KEY_PAUSE, - [0x2d] = KEY_PLAY, - [0x2e] = KEY_RECORD, - [0x2f] = KEY_F17, /* picture in picture */ - [0x30] = KEY_KPPLUS, /* zoom in */ - [0x31] = KEY_KPMINUS, /* zoom out */ - [0x32] = KEY_F18, /* capture */ - [0x33] = KEY_F19, /* web */ - [0x34] = KEY_EMAIL, - [0x35] = KEY_PHONE, - [0x36] = KEY_PC -}; static int debug; module_param(debug, int, 0644); /* debug level (0,1,2) */ @@ -573,7 +328,8 @@ int bttv_input_init(struct bttv *btv) ir->polling = 50; // ms break; case BTTV_BOARD_CONCEPTRONIC_CTVFMI2: - ir_codes = ir_codes_conceptronic; + case BTTV_BOARD_CONTVFMI: + ir_codes = ir_codes_pixelview; ir->mask_keycode = 0x001F00; ir->mask_keyup = 0x006000; ir->polling = 50; // ms diff --git a/drivers/media/video/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c index b40e9734bf08..16323a5d68ac 100644 --- a/drivers/media/video/bttv-risc.c +++ b/drivers/media/video/bt8xx/bttv-risc.c @@ -51,8 +51,10 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, int rc; /* estimate risc mem: worst case is one write per page border + - one write per scan line + sync + jump (all 2 dwords) */ - instructions = (bpl * lines) / PAGE_SIZE + lines; + one write per scan line + sync + jump (all 2 dwords). padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + instructions = 1 + ((bpl + padding) * lines) / PAGE_SIZE + lines; instructions += 2; if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions*8)) < 0) return rc; @@ -104,7 +106,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) / 4 > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); return 0; } @@ -222,7 +224,7 @@ bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) / 4 > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); return 0; } @@ -274,6 +276,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, if (line > maxy) btcx_calc_skips(line, ov->w.width, &maxy, skips, &nskips, ov->clips, ov->nclips); + else + nskips = 0; /* write out risc code */ for (start = 0, skip = 0; start < ov->w.width; start = end) { @@ -307,7 +311,7 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) / 4 > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); kfree(skips); return 0; } @@ -505,12 +509,11 @@ bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc, } void -bttv_dma_free(struct bttv *btv, struct bttv_buffer *buf) +bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf) { - if (in_interrupt()) - BUG(); + BUG_ON(in_interrupt()); videobuf_waiton(&buf->vb,0,0); - videobuf_dma_pci_unmap(btv->c.pci, &buf->vb.dma); + videobuf_dma_unmap(q, &buf->vb.dma); videobuf_dma_free(&buf->vb.dma); btcx_riscmem_free(btv->c.pci,&buf->bottom); btcx_riscmem_free(btv->c.pci,&buf->top); diff --git a/drivers/media/video/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c index 72afdd64b882..e20ff238e409 100644 --- a/drivers/media/video/bttv-vbi.c +++ b/drivers/media/video/bt8xx/bttv-vbi.c @@ -96,7 +96,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q, return -EINVAL; if (STATE_NEEDS_INIT == buf->vb.state) { - if (0 != (rc = videobuf_iolock(btv->c.pci, &buf->vb, NULL))) + if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL))) goto fail; if (0 != (rc = vbi_buffer_risc(btv,buf,fh->lines))) goto fail; @@ -109,7 +109,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q, return 0; fail: - bttv_dma_free(btv,buf); + bttv_dma_free(q,btv,buf); return rc; } @@ -136,7 +136,7 @@ static void vbi_buffer_release(struct videobuf_queue *q, struct videobuf_buffer struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb); dprintk("free %p\n",vb); - bttv_dma_free(fh->btv,buf); + bttv_dma_free(&fh->cap,fh->btv,buf); } struct videobuf_queue_ops bttv_vbi_qops = { diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bt8xx/bttv.h index 9908c8e0c951..3a23265c1538 100644 --- a/drivers/media/video/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -18,6 +18,7 @@ #include <linux/i2c.h> #include <media/ir-common.h> #include <media/ir-kbd-i2c.h> +#include <media/i2c-addr.h> /* ---------------------------------------------------------- */ /* exported by bttv-cards.c */ @@ -168,25 +169,6 @@ #define BTTV_BOARD_HAUPPAUGE_IMPACTVCB 0x8f #define BTTV_BOARD_MACHTV_MAGICTV 0x90 -/* i2c address list */ -#define I2C_TSA5522 0xc2 -#define I2C_TDA7432 0x8a -#define I2C_BT832_ALT1 0x88 -#define I2C_BT832_ALT2 0x8a // alternate setting -#define I2C_TDA8425 0x82 -#define I2C_TDA9840 0x84 -#define I2C_TDA9850 0xb6 /* also used by 9855,9873 */ -#define I2C_TDA9874 0xb0 /* also used by 9875 */ -#define I2C_TDA9875 0xb0 -#define I2C_HAUPEE 0xa0 -#define I2C_STBEE 0xae -#define I2C_VHX 0xc0 -#define I2C_MSP3400 0x80 -#define I2C_MSP3400_ALT 0x88 -#define I2C_TEA6300 0x80 /* also used by 6320 */ -#define I2C_DPL3518 0x84 -#define I2C_TDA9887 0x86 - /* more card-specific defines */ #define PT2254_L_CHANNEL 0x10 #define PT2254_R_CHANNEL 0x08 @@ -252,7 +234,8 @@ struct tvcard unsigned int digital_mode; // DIGITAL_MODE_CAMERA or DIGITAL_MODE_VIDEO u32 gpiomask; u32 muxsel[16]; - u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ + u32 gpiomux[4]; /* Tuner, Radio, external, internal */ + u32 gpiomute; /* GPIO mute setting */ u32 gpiomask2; /* GPIO MUX mask */ /* i2c audio flags */ diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index 9cb72f176f7d..ee989d2e15d9 100644 --- a/drivers/media/video/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -41,7 +41,6 @@ #include <linux/device.h> #include <media/video-buf.h> -#include <media/audiochip.h> #include <media/tuner.h> #include <media/tveeprom.h> #include <media/ir-common.h> @@ -190,7 +189,8 @@ int bttv_buffer_activate_video(struct bttv *btv, struct bttv_buffer_set *set); int bttv_buffer_activate_vbi(struct bttv *btv, struct bttv_buffer *vbi); -void bttv_dma_free(struct bttv *btv, struct bttv_buffer *buf); +void bttv_dma_free(struct videobuf_queue *q, struct bttv *btv, + struct bttv_buffer *buf); /* overlay handling */ int bttv_overlay_risc(struct bttv *btv, struct bttv_overlay *ov, @@ -298,6 +298,8 @@ struct bttv { int i2c_state, i2c_rc; int i2c_done; wait_queue_head_t i2c_queue; + struct i2c_client *i2c_msp34xx_client; + struct i2c_client *i2c_tvaudio_client; /* video4linux (1) */ struct video_device *video_dev; @@ -320,6 +322,7 @@ struct bttv { /* video state */ unsigned int input; unsigned int audio; + unsigned int mute; unsigned long freq; int tvnorm,hue,contrast,bright,saturation; struct v4l2_framebuffer fbuf; diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 6bad93ef969f..cf61c590f4ad 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -73,7 +73,7 @@ OTHER DEALINGS IN THE SOFTWARE. #include <linux/parport.h> #include <linux/sched.h> #include <linux/videodev.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include <asm/uaccess.h> #include "bw-qcam.h" @@ -150,7 +150,7 @@ static int qc_calibrate(struct qcam_device *q) static struct qcam_device *qcam_init(struct parport *port) { struct qcam_device *q; - + q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL); if(q==NULL) return NULL; @@ -158,17 +158,17 @@ static struct qcam_device *qcam_init(struct parport *port) q->pport = port; q->pdev = parport_register_device(port, "bw-qcam", NULL, NULL, NULL, 0, NULL); - if (q->pdev == NULL) + if (q->pdev == NULL) { printk(KERN_ERR "bw-qcam: couldn't register for %s.\n", port->name); kfree(q); return NULL; } - + memcpy(&q->vdev, &qcam_template, sizeof(qcam_template)); - - init_MUTEX(&q->lock); + + mutex_init(&q->lock); q->port_mode = (QC_ANY | QC_NOTSET); q->width = 320; @@ -236,12 +236,12 @@ static int qc_waithand(struct qcam_device *q, int val) while (!((status = read_lpstatus(q)) & 8)) { /* 1000 is enough spins on the I/O for all normal - cases, at that point we start to poll slowly + cases, at that point we start to poll slowly until the camera wakes up. However, we are busy blocked until the camera responds, so setting it lower is much better for interactive response. */ - + if(runs++>maxpoll) { msleep_interruptible(5); @@ -255,12 +255,12 @@ static int qc_waithand(struct qcam_device *q, int val) while (((status = read_lpstatus(q)) & 8)) { /* 1000 is enough spins on the I/O for all normal - cases, at that point we start to poll slowly + cases, at that point we start to poll slowly until the camera wakes up. However, we are busy blocked until the camera responds, so setting it lower is much better for interactive response. */ - + if(runs++>maxpoll) { msleep_interruptible(5); @@ -282,17 +282,17 @@ static unsigned int qc_waithand2(struct qcam_device *q, int val) { unsigned int status; int runs=0; - - do + + do { status = read_lpdata(q); /* 1000 is enough spins on the I/O for all normal - cases, at that point we start to poll slowly + cases, at that point we start to poll slowly until the camera wakes up. However, we are busy blocked until the camera responds, so setting it lower is much better for interactive response. */ - + if(runs++>maxpoll) { msleep_interruptible(5); @@ -321,7 +321,7 @@ static int qc_detect(struct qcam_device *q) lastreg = reg = read_lpstatus(q) & 0xf0; - for (i = 0; i < 500; i++) + for (i = 0; i < 500; i++) { reg = read_lpstatus(q) & 0xf0; if (reg != lastreg) @@ -357,7 +357,7 @@ static int qc_detect(struct qcam_device *q) static void qc_reset(struct qcam_device *q) { - switch (q->port_mode & QC_FORCE_MASK) + switch (q->port_mode & QC_FORCE_MASK) { case QC_FORCE_UNIDIR: q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_UNIDIR; @@ -370,7 +370,7 @@ static void qc_reset(struct qcam_device *q) case QC_ANY: write_lpcontrol(q, 0x20); write_lpdata(q, 0x75); - + if (read_lpdata(q) != 0x75) { q->port_mode = (q->port_mode & ~QC_MODE_MASK) | QC_BIDIR; } else { @@ -398,8 +398,8 @@ static void qc_reset(struct qcam_device *q) static int qc_setscanmode(struct qcam_device *q) { int old_mode = q->mode; - - switch (q->transfer_scale) + + switch (q->transfer_scale) { case 1: q->mode = 0; @@ -412,7 +412,7 @@ static int qc_setscanmode(struct qcam_device *q) break; } - switch (q->bpp) + switch (q->bpp) { case 4: break; @@ -421,7 +421,7 @@ static int qc_setscanmode(struct qcam_device *q) break; } - switch (q->port_mode & QC_MODE_MASK) + switch (q->port_mode & QC_MODE_MASK) { case QC_BIDIR: q->mode += 1; @@ -430,10 +430,10 @@ static int qc_setscanmode(struct qcam_device *q) case QC_UNIDIR: break; } - + if (q->mode != old_mode) q->status |= QC_PARAM_CHANGE; - + return 0; } @@ -451,7 +451,7 @@ static void qc_set(struct qcam_device *q) /* Set the brightness. Yes, this is repetitive, but it works. * Shorter versions seem to fail subtly. Feel free to try :-). */ /* I think the problem was in qc_command, not here -- bls */ - + qc_command(q, 0xb); qc_command(q, q->brightness); @@ -502,13 +502,13 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[]) unsigned int hi2, lo2; static int state = 0; - if (buffer == NULL) + if (buffer == NULL) { state = 0; return 0; } - - switch (q->port_mode & QC_MODE_MASK) + + switch (q->port_mode & QC_MODE_MASK) { case QC_BIDIR: /* Bi-directional Port */ write_lpcontrol(q, 0x26); @@ -517,7 +517,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[]) write_lpcontrol(q, 0x2e); lo2 = (qc_waithand2(q, 0) >> 1); hi2 = (read_lpstatus(q) >> 3) & 0x1f; - switch (q->bpp) + switch (q->bpp) { case 4: buffer[0] = lo & 0xf; @@ -544,7 +544,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[]) write_lpcontrol(q, 0xe); hi = (qc_waithand(q, 0) & 0xf0) >> 4; - switch (q->bpp) + switch (q->bpp) { case 4: buffer[0] = lo; @@ -552,7 +552,7 @@ static inline int qc_readbytes(struct qcam_device *q, char buffer[]) ret = 2; break; case 6: - switch (state) + switch (state) { case 0: buffer[0] = (lo << 2) | ((hi & 0xc) >> 2); @@ -604,13 +604,13 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l int shift=8-q->bpp; char invert; - if (q->mode == -1) + if (q->mode == -1) return -ENXIO; qc_command(q, 0x7); qc_command(q, q->mode); - if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) { write_lpcontrol(q, 0x2e); /* turn port around */ write_lpcontrol(q, 0x26); @@ -618,7 +618,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l write_lpcontrol(q, 0x2e); (void) qc_waithand(q, 0); } - + /* strange -- should be 15:63 below, but 4bpp is odd */ invert = (q->bpp == 4) ? 16 : 63; @@ -629,15 +629,15 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l q->transfer_scale; transperline = (transperline + divisor - 1) / divisor; - for (i = 0, yield = yieldlines; i < linestotrans; i++) + for (i = 0, yield = yieldlines; i < linestotrans; i++) { - for (pixels_read = j = 0; j < transperline; j++) + for (pixels_read = j = 0; j < transperline; j++) { bytes = qc_readbytes(q, buffer); - for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) + for (k = 0; k < bytes && (pixels_read + k) < pixels_per_line; k++) { int o; - if (buffer[k] == 0 && invert == 16) + if (buffer[k] == 0 && invert == 16) { /* 4bpp is odd (again) -- inverter is 16, not 15, but output must be 0-15 -- bls */ @@ -653,7 +653,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l pixels_read += bytes; } (void) qc_readbytes(q, NULL); /* reset state machine */ - + /* Grabbing an entire frame from the quickcam is a lengthy process. We don't (usually) want to busy-block the processor for the entire frame. yieldlines is a module @@ -666,7 +666,7 @@ static long qc_capture(struct qcam_device * q, char __user *buf, unsigned long l } } - if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) + if ((q->port_mode & QC_MODE_MASK) == QC_BIDIR) { write_lpcontrol(q, 2); write_lpcontrol(q, 6); @@ -687,7 +687,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, { struct video_device *dev = video_devdata(file); struct qcam_device *qcam=(struct qcam_device *)dev; - + switch(cmd) { case VIDIOCGCAP: @@ -762,7 +762,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if(p->depth!=4 && p->depth!=6) return -EINVAL; - + /* * Now load the camera. */ @@ -772,9 +772,9 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, qcam->whitebal = p->whiteness>>8; qcam->bpp = p->depth; - down(&qcam->lock); + mutex_lock(&qcam->lock); qc_setscanmode(qcam); - up(&qcam->lock); + mutex_unlock(&qcam->lock); qcam->status |= QC_PARAM_CHANGE; return 0; @@ -790,11 +790,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if(vw->width<80||vw->width>320) return -EINVAL; - + qcam->width = 320; qcam->height = 240; qcam->transfer_scale = 4; - + if(vw->width>=160 && vw->height>=120) { qcam->transfer_scale = 2; @@ -805,14 +805,14 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, qcam->height = 240; qcam->transfer_scale = 1; } - down(&qcam->lock); + mutex_lock(&qcam->lock); qc_setscanmode(qcam); - up(&qcam->lock); - + mutex_unlock(&qcam->lock); + /* We must update the camera before we grab. We could just have changed the grab size */ qcam->status |= QC_PARAM_CHANGE; - + /* Ok we figured out what to use from our wide choice */ return 0; } @@ -853,9 +853,9 @@ static ssize_t qcam_read(struct file *file, char __user *buf, struct qcam_device *qcam=(struct qcam_device *)v; int len; parport_claim_or_block(qcam->pdev); - - down(&qcam->lock); - + + mutex_lock(&qcam->lock); + qc_reset(qcam); /* Update the camera parameters if we need to */ @@ -863,13 +863,13 @@ static ssize_t qcam_read(struct file *file, char __user *buf, qc_set(qcam); len=qc_capture(qcam, buf,count); - - up(&qcam->lock); - + + mutex_unlock(&qcam->lock); + parport_release(qcam->pdev); return len; } - + static struct file_operations qcam_fops = { .owner = THIS_MODULE, .open = video_exclusive_open, @@ -905,11 +905,11 @@ static int init_bwqcam(struct parport *port) qcam=qcam_init(port); if(qcam==NULL) return -ENODEV; - + parport_claim_or_block(qcam->pdev); qc_reset(qcam); - + if(qc_detect(qcam)==0) { parport_release(qcam->pdev); @@ -920,9 +920,9 @@ static int init_bwqcam(struct parport *port) qc_calibrate(qcam); parport_release(qcam->pdev); - + printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name); - + if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1) { parport_unregister_device(qcam->pdev); @@ -1013,7 +1013,7 @@ static int __init init_bw_qcams(void) printk("Connectix Quickcam max-poll was above 5000. Using 5000.\n"); maxpoll = 5000; } - + if (yieldlines < 1) { printk("Connectix Quickcam yieldlines was less than 1. Using 1.\n"); yieldlines = 1; diff --git a/drivers/media/video/bw-qcam.h b/drivers/media/video/bw-qcam.h index 723e8ad9e56a..6701dafbc0da 100644 --- a/drivers/media/video/bw-qcam.h +++ b/drivers/media/video/bw-qcam.h @@ -55,7 +55,7 @@ struct qcam_device { struct video_device vdev; struct pardevice *pdev; struct parport *pport; - struct semaphore lock; + struct mutex lock; int width, height; int bpp; int mode; diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index 9976db4f6da8..22a7386bbea6 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -16,7 +16,7 @@ * * The parport parameter controls which parports will be scanned. * Scanning all parports causes some printers to print a garbage page. - * -- March 14, 1999 Billy Donahue <billy@escape.com> + * -- March 14, 1999 Billy Donahue <billy@escape.com> * * Fixed data format to BGR, added force_rgb parameter. Added missing * parport_unregister_driver() on module removal. @@ -34,7 +34,8 @@ #include <linux/parport.h> #include <linux/sched.h> #include <linux/videodev.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> + #include <asm/uaccess.h> struct qcam_device { @@ -47,7 +48,7 @@ struct qcam_device { int contrast, brightness, whitebal; int top, left; unsigned int bidirectional; - struct semaphore lock; + struct mutex lock; }; /* cameras maximum */ @@ -87,7 +88,7 @@ static inline unsigned int qcam_ready2(struct qcam_device *qcam) return (parport_read_data(qcam->pport) & 0x1)?1:0; } -static unsigned int qcam_await_ready1(struct qcam_device *qcam, +static unsigned int qcam_await_ready1(struct qcam_device *qcam, int value) { unsigned long oldjiffies = jiffies; @@ -97,7 +98,7 @@ static unsigned int qcam_await_ready1(struct qcam_device *qcam, if (qcam_ready1(qcam) == value) return 0; - /* If the camera didn't respond within 1/25 second, poll slowly + /* If the camera didn't respond within 1/25 second, poll slowly for a while. */ for (i = 0; i < 50; i++) { @@ -122,7 +123,7 @@ static unsigned int qcam_await_ready2(struct qcam_device *qcam, int value) if (qcam_ready2(qcam) == value) return 0; - /* If the camera didn't respond within 1/25 second, poll slowly + /* If the camera didn't respond within 1/25 second, poll slowly for a while. */ for (i = 0; i < 50; i++) { @@ -156,12 +157,12 @@ static int qcam_write_data(struct qcam_device *qcam, unsigned int data) unsigned int idata; parport_write_data(qcam->pport, data); idata = qcam_read_data(qcam); - if (data != idata) + if (data != idata) { - printk(KERN_WARNING "cqcam: sent %x but received %x\n", data, + printk(KERN_WARNING "cqcam: sent %x but received %x\n", data, idata); return 1; - } + } return 0; } @@ -192,12 +193,12 @@ static int qc_detect(struct qcam_device *qcam) no device was found". Fix this one day. */ if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA && qcam->pport->probe_info[0].model - && !strcmp(qcam->pdev->port->probe_info[0].model, + && !strcmp(qcam->pdev->port->probe_info[0].model, "Color QuickCam 2.0")) { printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n"); return 1; } - + if (probe < 2) return 0; @@ -205,11 +206,11 @@ static int qc_detect(struct qcam_device *qcam) /* look for a heartbeat */ ostat = stat = parport_read_status(qcam->pport); - for (i=0; i<250; i++) + for (i=0; i<250; i++) { mdelay(1); stat = parport_read_status(qcam->pport); - if (ostat != stat) + if (ostat != stat) { if (++count >= 3) return 1; ostat = stat; @@ -225,11 +226,11 @@ static int qc_detect(struct qcam_device *qcam) count = 0; ostat = stat = parport_read_status(qcam->pport); - for (i=0; i<250; i++) + for (i=0; i<250; i++) { mdelay(1); stat = parport_read_status(qcam->pport); - if (ostat != stat) + if (ostat != stat) { if (++count >= 3) return 1; ostat = stat; @@ -246,7 +247,7 @@ static void qc_reset(struct qcam_device *qcam) parport_write_control(qcam->pport, 0x8); mdelay(1); parport_write_control(qcam->pport, 0xc); - mdelay(1); + mdelay(1); } /* Reset the QuickCam and program for brightness, contrast, @@ -257,7 +258,7 @@ static void qc_setup(struct qcam_device *q) qc_reset(q); /* Set the brightness. */ - qcam_set(q, 11, q->brightness); + qcam_set(q, 11, q->brightness); /* Set the height and width. These refer to the actual CCD area *before* applying the selected decimation. */ @@ -271,12 +272,12 @@ static void qc_setup(struct qcam_device *q) /* Set contrast and white balance. */ qcam_set(q, 0x19, q->contrast); qcam_set(q, 0x1f, q->whitebal); - + /* Set the speed. */ qcam_set(q, 45, 2); } -/* Read some bytes from the camera and put them in the buffer. +/* Read some bytes from the camera and put them in the buffer. nbytes should be a multiple of 3, because bidirectional mode gives us three bytes at a time. */ @@ -382,7 +383,7 @@ static long qc_capture(struct qcam_device *q, char __user *buf, unsigned long le if (qcam_set(q, 7, (q->mode | (is_bi_dir?1:0)) + 1)) return -EIO; - + lines = q->height; pixelsperline = q->width; bitsperxfer = (is_bi_dir) ? 24 : 8; @@ -498,7 +499,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, { struct video_device *dev = video_devdata(file); struct qcam_device *qcam=(struct qcam_device *)dev; - + switch(cmd) { case VIDIOCGCAP: @@ -573,7 +574,7 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, */ if (p->depth != 24 || p->palette != VIDEO_PALETTE_RGB24) return -EINVAL; - + /* * Now load the camera. */ @@ -581,11 +582,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, qcam->contrast = p->contrast>>8; qcam->whitebal = p->whiteness>>8; - down(&qcam->lock); + mutex_lock(&qcam->lock); parport_claim_or_block(qcam->pdev); - qc_setup(qcam); + qc_setup(qcam); parport_release(qcam->pdev); - up(&qcam->lock); + mutex_unlock(&qcam->lock); return 0; } case VIDIOCSWIN: @@ -600,11 +601,11 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if(vw->width<80||vw->width>320) return -EINVAL; - + qcam->width = 80; qcam->height = 60; qcam->mode = QC_DECIMATION_4; - + if(vw->width>=160 && vw->height>=120) { qcam->width = 160; @@ -626,13 +627,13 @@ static int qcam_do_ioctl(struct inode *inode, struct file *file, qcam->mode = QC_BILLIONS | QC_DECIMATION_1; } #endif - /* Ok we figured out what to use from our + /* Ok we figured out what to use from our wide choice */ - down(&qcam->lock); + mutex_lock(&qcam->lock); parport_claim_or_block(qcam->pdev); qc_setup(qcam); parport_release(qcam->pdev); - up(&qcam->lock); + mutex_unlock(&qcam->lock); return 0; } case VIDIOCGWIN: @@ -672,12 +673,12 @@ static ssize_t qcam_read(struct file *file, char __user *buf, struct qcam_device *qcam=(struct qcam_device *)v; int len; - down(&qcam->lock); + mutex_lock(&qcam->lock); parport_claim_or_block(qcam->pdev); /* Probably should have a semaphore against multiple users */ - len = qc_capture(qcam, buf,count); + len = qc_capture(qcam, buf,count); parport_release(qcam->pdev); - up(&qcam->lock); + mutex_unlock(&qcam->lock); return len; } @@ -706,7 +707,7 @@ static struct video_device qcam_template= static struct qcam_device *qcam_init(struct parport *port) { struct qcam_device *q; - + q = kmalloc(sizeof(struct qcam_device), GFP_KERNEL); if(q==NULL) return NULL; @@ -717,17 +718,17 @@ static struct qcam_device *qcam_init(struct parport *port) q->bidirectional = (q->pport->modes & PARPORT_MODE_TRISTATE)?1:0; - if (q->pdev == NULL) + if (q->pdev == NULL) { printk(KERN_ERR "c-qcam: couldn't register for %s.\n", port->name); kfree(q); return NULL; } - + memcpy(&q->vdev, &qcam_template, sizeof(qcam_template)); - init_MUTEX(&q->lock); + mutex_init(&q->lock); q->width = q->ccd_width = 320; q->height = q->ccd_height = 240; q->mode = QC_MILLIONS | QC_DECIMATION_1; @@ -765,11 +766,11 @@ static int init_cqcam(struct parport *port) qcam = qcam_init(port); if (qcam==NULL) return -ENODEV; - + parport_claim_or_block(qcam->pdev); qc_reset(qcam); - + if (probe && qc_detect(qcam)==0) { parport_release(qcam->pdev); @@ -781,7 +782,7 @@ static int init_cqcam(struct parport *port) qc_setup(qcam); parport_release(qcam->pdev); - + if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1) { printk(KERN_ERR "Unable to register Colour QuickCam on %s\n", @@ -791,9 +792,9 @@ static int init_cqcam(struct parport *port) return -ENODEV; } - printk(KERN_INFO "video%d: Colour QuickCam found on %s\n", + printk(KERN_INFO "video%d: Colour QuickCam found on %s\n", qcam->vdev.minor, qcam->pport->name); - + qcams[num_cams++] = qcam; return 0; diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index 85d964b5b33c..2227c5640c12 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -24,7 +24,7 @@ */ /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */ -/* #define _CPIA_DEBUG_ 1 */ +/* #define _CPIA_DEBUG_ 1 */ #include <linux/config.h> @@ -39,7 +39,7 @@ #include <linux/pagemap.h> #include <linux/delay.h> #include <asm/io.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #ifdef CONFIG_KMOD #include <linux/kmod.h> @@ -58,7 +58,7 @@ static int video_nr = -1; #ifdef MODULE module_param(video_nr, int, 0); -MODULE_AUTHOR("Scott J. Bertin <sbertin@securenym.net> & Peter Pregler <Peter_Pregler@email.com> & Johannes Erdfelt <johannes@erdfeld.com>"); +MODULE_AUTHOR("Scott J. Bertin <sbertin@securenym.net> & Peter Pregler <Peter_Pregler@email.com> & Johannes Erdfelt <johannes@erdfelt.com>"); MODULE_DESCRIPTION("V4L-driver for Vision CPiA based cameras"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("video"); @@ -67,11 +67,11 @@ MODULE_SUPPORTED_DEVICE("video"); static unsigned short colorspace_conv = 0; module_param(colorspace_conv, ushort, 0444); MODULE_PARM_DESC(colorspace_conv, - "\n<n> Colorspace conversion:" - "\n0 = disable" - "\n1 = enable" - "\nDefault value is 0" - "\n"); + "\n<n> Colorspace conversion:" + "\n0 = disable" + "\n1 = enable" + "\nDefault value is 0" + "\n"); #define ABOUT "V4L-Driver for Vision CPiA based cameras" @@ -189,8 +189,8 @@ enum { #define TC 94 #define EXP_ACC_DARK 50 #define EXP_ACC_LIGHT 90 -#define HIGH_COMP_102 160 -#define MAX_COMP 239 +#define HIGH_COMP_102 160 +#define MAX_COMP 239 #define DARK_TIME 3 #define LIGHT_TIME 3 @@ -208,7 +208,7 @@ static u8 flicker_jumps[2][2][4] = static void reset_camera_struct(struct cam_data *cam); static int find_over_exposure(int brightness); static void set_flicker(struct cam_params *params, volatile u32 *command_flags, - int on); + int on); /********************************************************************** @@ -262,7 +262,7 @@ static void rvfree(void *mem, unsigned long size) static struct proc_dir_entry *cpia_proc_root=NULL; static int cpia_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) + int count, int *eof, void *data) { char *out = page; int len, tmp; @@ -276,58 +276,58 @@ static int cpia_read_proc(char *page, char **start, off_t off, out += sprintf(out, "V4L Driver version: %d.%d.%d\n", CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER); out += sprintf(out, "CPIA Version: %d.%02d (%d.%d)\n", - cam->params.version.firmwareVersion, - cam->params.version.firmwareRevision, - cam->params.version.vcVersion, - cam->params.version.vcRevision); + cam->params.version.firmwareVersion, + cam->params.version.firmwareRevision, + cam->params.version.vcVersion, + cam->params.version.vcRevision); out += sprintf(out, "CPIA PnP-ID: %04x:%04x:%04x\n", - cam->params.pnpID.vendor, cam->params.pnpID.product, - cam->params.pnpID.deviceRevision); + cam->params.pnpID.vendor, cam->params.pnpID.product, + cam->params.pnpID.deviceRevision); out += sprintf(out, "VP-Version: %d.%d %04x\n", - cam->params.vpVersion.vpVersion, - cam->params.vpVersion.vpRevision, - cam->params.vpVersion.cameraHeadID); - + cam->params.vpVersion.vpVersion, + cam->params.vpVersion.vpRevision, + cam->params.vpVersion.cameraHeadID); + out += sprintf(out, "system_state: %#04x\n", - cam->params.status.systemState); + cam->params.status.systemState); out += sprintf(out, "grab_state: %#04x\n", - cam->params.status.grabState); + cam->params.status.grabState); out += sprintf(out, "stream_state: %#04x\n", - cam->params.status.streamState); + cam->params.status.streamState); out += sprintf(out, "fatal_error: %#04x\n", - cam->params.status.fatalError); + cam->params.status.fatalError); out += sprintf(out, "cmd_error: %#04x\n", - cam->params.status.cmdError); + cam->params.status.cmdError); out += sprintf(out, "debug_flags: %#04x\n", - cam->params.status.debugFlags); + cam->params.status.debugFlags); out += sprintf(out, "vp_status: %#04x\n", - cam->params.status.vpStatus); + cam->params.status.vpStatus); out += sprintf(out, "error_code: %#04x\n", - cam->params.status.errorCode); + cam->params.status.errorCode); /* QX3 specific entries */ if (cam->params.qx3.qx3_detected) { out += sprintf(out, "button: %4d\n", - cam->params.qx3.button); + cam->params.qx3.button); out += sprintf(out, "cradled: %4d\n", - cam->params.qx3.cradled); + cam->params.qx3.cradled); } out += sprintf(out, "video_size: %s\n", - cam->params.format.videoSize == VIDEOSIZE_CIF ? + cam->params.format.videoSize == VIDEOSIZE_CIF ? "CIF " : "QCIF"); out += sprintf(out, "roi: (%3d, %3d) to (%3d, %3d)\n", - cam->params.roi.colStart*8, - cam->params.roi.rowStart*4, - cam->params.roi.colEnd*8, - cam->params.roi.rowEnd*4); + cam->params.roi.colStart*8, + cam->params.roi.rowStart*4, + cam->params.roi.colEnd*8, + cam->params.roi.rowEnd*4); out += sprintf(out, "actual_fps: %3d\n", cam->fps); out += sprintf(out, "transfer_rate: %4dkB/s\n", - cam->transfer_rate); - + cam->transfer_rate); + out += sprintf(out, "\nread-write\n"); out += sprintf(out, "----------------------- current min" - " max default comment\n"); + " max default comment\n"); out += sprintf(out, "brightness: %8d %8d %8d %8d\n", - cam->params.colourParams.brightness, 0, 100, 50); + cam->params.colourParams.brightness, 0, 100, 50); if (cam->params.version.firmwareVersion == 1 && cam->params.version.firmwareRevision == 2) /* 1-02 firmware limits contrast to 80 */ @@ -336,26 +336,26 @@ static int cpia_read_proc(char *page, char **start, off_t off, tmp = 96; out += sprintf(out, "contrast: %8d %8d %8d %8d" - " steps of 8\n", - cam->params.colourParams.contrast, 0, tmp, 48); + " steps of 8\n", + cam->params.colourParams.contrast, 0, tmp, 48); out += sprintf(out, "saturation: %8d %8d %8d %8d\n", - cam->params.colourParams.saturation, 0, 100, 50); + cam->params.colourParams.saturation, 0, 100, 50); tmp = (25000+5000*cam->params.sensorFps.baserate)/ (1<<cam->params.sensorFps.divisor); out += sprintf(out, "sensor_fps: %4d.%03d %8d %8d %8d\n", - tmp/1000, tmp%1000, 3, 30, 15); + tmp/1000, tmp%1000, 3, 30, 15); out += sprintf(out, "stream_start_line: %8d %8d %8d %8d\n", - 2*cam->params.streamStartLine, 0, + 2*cam->params.streamStartLine, 0, cam->params.format.videoSize == VIDEOSIZE_CIF ? 288:144, cam->params.format.videoSize == VIDEOSIZE_CIF ? 240:120); out += sprintf(out, "sub_sample: %8s %8s %8s %8s\n", - cam->params.format.subSample == SUBSAMPLE_420 ? + cam->params.format.subSample == SUBSAMPLE_420 ? "420" : "422", "420", "422", "422"); out += sprintf(out, "yuv_order: %8s %8s %8s %8s\n", - cam->params.format.yuvOrder == YUVORDER_YUYV ? + cam->params.format.yuvOrder == YUVORDER_YUYV ? "YUYV" : "UYVY", "YUYV" , "UYVY", "YUYV"); out += sprintf(out, "ecp_timing: %8s %8s %8s %8s\n", - cam->params.ecpTiming ? "slow" : "normal", "slow", + cam->params.ecpTiming ? "slow" : "normal", "slow", "normal", "normal"); if (cam->params.colourBalance.balanceMode == 2) { @@ -366,11 +366,11 @@ static int cpia_read_proc(char *page, char **start, off_t off, out += sprintf(out, "color_balance_mode: %8s %8s %8s" " %8s\n", tmpstr, "manual", "auto", "auto"); out += sprintf(out, "red_gain: %8d %8d %8d %8d\n", - cam->params.colourBalance.redGain, 0, 212, 32); + cam->params.colourBalance.redGain, 0, 212, 32); out += sprintf(out, "green_gain: %8d %8d %8d %8d\n", - cam->params.colourBalance.greenGain, 0, 212, 6); + cam->params.colourBalance.greenGain, 0, 212, 6); out += sprintf(out, "blue_gain: %8d %8d %8d %8d\n", - cam->params.colourBalance.blueGain, 0, 212, 92); + cam->params.colourBalance.blueGain, 0, 212, 92); if (cam->params.version.firmwareVersion == 1 && cam->params.version.firmwareRevision == 2) @@ -381,11 +381,11 @@ static int cpia_read_proc(char *page, char **start, off_t off, if (cam->params.exposure.gainMode == 0) out += sprintf(out, "max_gain: unknown %28s" - " powers of 2\n", tmpstr); + " powers of 2\n", tmpstr); else out += sprintf(out, "max_gain: %8d %28s" " 1,2,4 or 8 \n", - 1<<(cam->params.exposure.gainMode-1), tmpstr); + 1<<(cam->params.exposure.gainMode-1), tmpstr); switch(cam->params.exposure.expMode) { case 1: @@ -402,10 +402,10 @@ static int cpia_read_proc(char *page, char **start, off_t off, out += sprintf(out, "exposure_mode: %8s %8s %8s" " %8s\n", tmpstr, "manual", "auto", "auto"); out += sprintf(out, "centre_weight: %8s %8s %8s %8s\n", - (2-cam->params.exposure.centreWeight) ? "on" : "off", - "off", "on", "on"); + (2-cam->params.exposure.centreWeight) ? "on" : "off", + "off", "on", "on"); out += sprintf(out, "gain: %8d %8d max_gain %8d 1,2,4,8 possible\n", - 1<<cam->params.exposure.gain, 1, 1); + 1<<cam->params.exposure.gain, 1, 1); if (cam->params.version.firmwareVersion == 1 && cam->params.version.firmwareRevision == 2) /* 1-02 firmware limits fineExp/2 to 127 */ @@ -414,7 +414,7 @@ static int cpia_read_proc(char *page, char **start, off_t off, tmp = 510; out += sprintf(out, "fine_exp: %8d %8d %8d %8d\n", - cam->params.exposure.fineExp*2, 0, tmp, 0); + cam->params.exposure.fineExp*2, 0, tmp, 0); if (cam->params.version.firmwareVersion == 1 && cam->params.version.firmwareRevision == 2) /* 1-02 firmware limits coarseExpHi to 0 */ @@ -426,46 +426,46 @@ static int cpia_read_proc(char *page, char **start, off_t off, " %8d\n", cam->params.exposure.coarseExpLo+ 256*cam->params.exposure.coarseExpHi, 0, tmp, 185); out += sprintf(out, "red_comp: %8d %8d %8d %8d\n", - cam->params.exposure.redComp, COMP_RED, 255, COMP_RED); + cam->params.exposure.redComp, COMP_RED, 255, COMP_RED); out += sprintf(out, "green1_comp: %8d %8d %8d %8d\n", - cam->params.exposure.green1Comp, COMP_GREEN1, 255, + cam->params.exposure.green1Comp, COMP_GREEN1, 255, COMP_GREEN1); out += sprintf(out, "green2_comp: %8d %8d %8d %8d\n", - cam->params.exposure.green2Comp, COMP_GREEN2, 255, + cam->params.exposure.green2Comp, COMP_GREEN2, 255, COMP_GREEN2); out += sprintf(out, "blue_comp: %8d %8d %8d %8d\n", - cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE); - + cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE); + out += sprintf(out, "apcor_gain1: %#8x %#8x %#8x %#8x\n", - cam->params.apcor.gain1, 0, 0xff, 0x1c); + cam->params.apcor.gain1, 0, 0xff, 0x1c); out += sprintf(out, "apcor_gain2: %#8x %#8x %#8x %#8x\n", - cam->params.apcor.gain2, 0, 0xff, 0x1a); + cam->params.apcor.gain2, 0, 0xff, 0x1a); out += sprintf(out, "apcor_gain4: %#8x %#8x %#8x %#8x\n", - cam->params.apcor.gain4, 0, 0xff, 0x2d); + cam->params.apcor.gain4, 0, 0xff, 0x2d); out += sprintf(out, "apcor_gain8: %#8x %#8x %#8x %#8x\n", - cam->params.apcor.gain8, 0, 0xff, 0x2a); + cam->params.apcor.gain8, 0, 0xff, 0x2a); out += sprintf(out, "vl_offset_gain1: %8d %8d %8d %8d\n", - cam->params.vlOffset.gain1, 0, 255, 24); + cam->params.vlOffset.gain1, 0, 255, 24); out += sprintf(out, "vl_offset_gain2: %8d %8d %8d %8d\n", - cam->params.vlOffset.gain2, 0, 255, 28); + cam->params.vlOffset.gain2, 0, 255, 28); out += sprintf(out, "vl_offset_gain4: %8d %8d %8d %8d\n", - cam->params.vlOffset.gain4, 0, 255, 30); + cam->params.vlOffset.gain4, 0, 255, 30); out += sprintf(out, "vl_offset_gain8: %8d %8d %8d %8d\n", - cam->params.vlOffset.gain8, 0, 255, 30); + cam->params.vlOffset.gain8, 0, 255, 30); out += sprintf(out, "flicker_control: %8s %8s %8s %8s\n", - cam->params.flickerControl.flickerMode ? "on" : "off", + cam->params.flickerControl.flickerMode ? "on" : "off", "off", "on", "off"); out += sprintf(out, "mains_frequency: %8d %8d %8d %8d" - " only 50/60\n", - cam->mainsFreq ? 60 : 50, 50, 60, 50); + " only 50/60\n", + cam->mainsFreq ? 60 : 50, 50, 60, 50); if(cam->params.flickerControl.allowableOverExposure < 0) out += sprintf(out, "allowable_overexposure: %4dauto auto %8d auto\n", - -cam->params.flickerControl.allowableOverExposure, - 255); + -cam->params.flickerControl.allowableOverExposure, + 255); else out += sprintf(out, "allowable_overexposure: %8d auto %8d auto\n", - cam->params.flickerControl.allowableOverExposure, - 255); + cam->params.flickerControl.allowableOverExposure, + 255); out += sprintf(out, "compression_mode: "); switch(cam->params.compression.mode) { case CPIA_COMPRESSION_NONE: @@ -483,52 +483,52 @@ static int cpia_read_proc(char *page, char **start, off_t off, } out += sprintf(out, " none,auto,manual auto\n"); out += sprintf(out, "decimation_enable: %8s %8s %8s %8s\n", - cam->params.compression.decimation == - DECIMATION_ENAB ? "on":"off", "off", "on", + cam->params.compression.decimation == + DECIMATION_ENAB ? "on":"off", "off", "on", "off"); out += sprintf(out, "compression_target: %9s %9s %9s %9s\n", - cam->params.compressionTarget.frTargeting == + cam->params.compressionTarget.frTargeting == CPIA_COMPRESSION_TARGET_FRAMERATE ? "framerate":"quality", "framerate", "quality", "quality"); out += sprintf(out, "target_framerate: %8d %8d %8d %8d\n", - cam->params.compressionTarget.targetFR, 1, 30, 15); + cam->params.compressionTarget.targetFR, 1, 30, 15); out += sprintf(out, "target_quality: %8d %8d %8d %8d\n", - cam->params.compressionTarget.targetQ, 1, 64, 5); + cam->params.compressionTarget.targetQ, 1, 64, 5); out += sprintf(out, "y_threshold: %8d %8d %8d %8d\n", - cam->params.yuvThreshold.yThreshold, 0, 31, 6); + cam->params.yuvThreshold.yThreshold, 0, 31, 6); out += sprintf(out, "uv_threshold: %8d %8d %8d %8d\n", - cam->params.yuvThreshold.uvThreshold, 0, 31, 6); + cam->params.yuvThreshold.uvThreshold, 0, 31, 6); out += sprintf(out, "hysteresis: %8d %8d %8d %8d\n", - cam->params.compressionParams.hysteresis, 0, 255, 3); + cam->params.compressionParams.hysteresis, 0, 255, 3); out += sprintf(out, "threshold_max: %8d %8d %8d %8d\n", - cam->params.compressionParams.threshMax, 0, 255, 11); + cam->params.compressionParams.threshMax, 0, 255, 11); out += sprintf(out, "small_step: %8d %8d %8d %8d\n", - cam->params.compressionParams.smallStep, 0, 255, 1); + cam->params.compressionParams.smallStep, 0, 255, 1); out += sprintf(out, "large_step: %8d %8d %8d %8d\n", - cam->params.compressionParams.largeStep, 0, 255, 3); + cam->params.compressionParams.largeStep, 0, 255, 3); out += sprintf(out, "decimation_hysteresis: %8d %8d %8d %8d\n", - cam->params.compressionParams.decimationHysteresis, + cam->params.compressionParams.decimationHysteresis, 0, 255, 2); out += sprintf(out, "fr_diff_step_thresh: %8d %8d %8d %8d\n", - cam->params.compressionParams.frDiffStepThresh, + cam->params.compressionParams.frDiffStepThresh, 0, 255, 5); out += sprintf(out, "q_diff_step_thresh: %8d %8d %8d %8d\n", - cam->params.compressionParams.qDiffStepThresh, + cam->params.compressionParams.qDiffStepThresh, 0, 255, 3); out += sprintf(out, "decimation_thresh_mod: %8d %8d %8d %8d\n", - cam->params.compressionParams.decimationThreshMod, + cam->params.compressionParams.decimationThreshMod, 0, 255, 2); /* QX3 specific entries */ if (cam->params.qx3.qx3_detected) { - out += sprintf(out, "toplight: %8s %8s %8s %8s\n", - cam->params.qx3.toplight ? "on" : "off", + out += sprintf(out, "toplight: %8s %8s %8s %8s\n", + cam->params.qx3.toplight ? "on" : "off", "off", "on", "off"); - out += sprintf(out, "bottomlight: %8s %8s %8s %8s\n", - cam->params.qx3.bottomlight ? "on" : "off", + out += sprintf(out, "bottomlight: %8s %8s %8s %8s\n", + cam->params.qx3.bottomlight ? "on" : "off", "off", "on", "off"); } - + len = out - page; len -= off; if (len < count) { @@ -543,7 +543,7 @@ static int cpia_read_proc(char *page, char **start, off_t off, static int match(char *checkstr, char **buffer, unsigned long *count, - int *find_colon, int *err) + int *find_colon, int *err) { int ret, colon_found = 1; int len = strlen(checkstr); @@ -583,7 +583,7 @@ static unsigned long int value(char **buffer, unsigned long *count, int *err) } static int cpia_write_proc(struct file *file, const char __user *buf, - unsigned long count, void *data) + unsigned long count, void *data) { struct cam_data *cam = data; struct cam_params new_params; @@ -619,12 +619,12 @@ static int cpia_write_proc(struct file *file, const char __user *buf, retval = -EINVAL; goto out; } - + buffer = page; - - if (down_interruptible(&cam->param_lock)) + + if (mutex_lock_interruptible(&cam->param_lock)) return -ERESTARTSYS; - + /* * Skip over leading whitespace */ @@ -632,15 +632,15 @@ static int cpia_write_proc(struct file *file, const char __user *buf, --count; ++buffer; } - + memcpy(&new_params, &cam->params, sizeof(struct cam_params)); new_mains = cam->mainsFreq; - + #define MATCH(x) (match(x, &buffer, &count, &find_colon, &retval)) #define VALUE (value(&buffer,&count, &retval)) #define FIRMWARE_VERSION(x,y) (new_params.version.firmwareVersion == (x) && \ - new_params.version.firmwareRevision == (y)) - + new_params.version.firmwareRevision == (y)) + retval = 0; while (count && !retval) { find_colon = 1; @@ -656,7 +656,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf, } command_flags |= COMMAND_SETCOLOURPARAMS; if(new_params.flickerControl.allowableOverExposure < 0) - new_params.flickerControl.allowableOverExposure = + new_params.flickerControl.allowableOverExposure = -find_over_exposure(new_params.colourParams.brightness); if(new_params.flickerControl.flickerMode != 0) command_flags |= COMMAND_SETFLICKERCTRL; @@ -721,7 +721,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf, /* Either base rate would work here */ new_params.sensorFps.baserate = 1; } - new_params.flickerControl.coarseJump = + new_params.flickerControl.coarseJump = flicker_jumps[new_mains] [new_params.sensorFps.baserate] [new_params.sensorFps.divisor]; @@ -1085,7 +1085,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf, } else if (MATCH("mains_frequency")) { if (!retval && MATCH("50")) { new_mains = 0; - new_params.flickerControl.coarseJump = + new_params.flickerControl.coarseJump = flicker_jumps[new_mains] [new_params.sensorFps.baserate] [new_params.sensorFps.divisor]; @@ -1093,7 +1093,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf, command_flags |= COMMAND_SETFLICKERCTRL; } else if (!retval && MATCH("60")) { new_mains = 1; - new_params.flickerControl.coarseJump = + new_params.flickerControl.coarseJump = flicker_jumps[new_mains] [new_params.sensorFps.baserate] [new_params.sensorFps.divisor]; @@ -1103,7 +1103,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf, retval = -EINVAL; } else if (MATCH("allowable_overexposure")) { if (!retval && MATCH("auto")) { - new_params.flickerControl.allowableOverExposure = + new_params.flickerControl.allowableOverExposure = -find_over_exposure(new_params.colourParams.brightness); if(new_params.flickerControl.flickerMode != 0) command_flags |= COMMAND_SETFLICKERCTRL; @@ -1146,10 +1146,10 @@ static int cpia_write_proc(struct file *file, const char __user *buf, command_flags |= COMMAND_SETCOMPRESSION; } else if (MATCH("compression_target")) { if (!retval && MATCH("quality")) - new_params.compressionTarget.frTargeting = + new_params.compressionTarget.frTargeting = CPIA_COMPRESSION_TARGET_QUALITY; else if (!retval && MATCH("framerate")) - new_params.compressionTarget.frTargeting = + new_params.compressionTarget.frTargeting = CPIA_COMPRESSION_TARGET_FRAMERATE; else retval = -EINVAL; @@ -1173,7 +1173,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf, if (!retval) { if(val > 0 && val <= 64) new_params.compressionTarget.targetQ = val; - else + else retval = -EINVAL; } command_flags |= COMMAND_SETCOMPRESSIONTARGET; @@ -1288,19 +1288,19 @@ static int cpia_write_proc(struct file *file, const char __user *buf, } command_flags |= COMMAND_SETCOMPRESSIONPARAMS; } else if (MATCH("toplight")) { - if (!retval && MATCH("on")) + if (!retval && MATCH("on")) new_params.qx3.toplight = 1; else if (!retval && MATCH("off")) new_params.qx3.toplight = 0; - else + else retval = -EINVAL; command_flags |= COMMAND_SETLIGHTS; } else if (MATCH("bottomlight")) { - if (!retval && MATCH("on")) + if (!retval && MATCH("on")) new_params.qx3.bottomlight = 1; - else if (!retval && MATCH("off")) + else if (!retval && MATCH("off")) new_params.qx3.bottomlight = 0; - else + else retval = -EINVAL; command_flags |= COMMAND_SETLIGHTS; } else { @@ -1326,7 +1326,7 @@ static int cpia_write_proc(struct file *file, const char __user *buf, } } } -#undef MATCH +#undef MATCH #undef VALUE #undef FIRMWARE_VERSION if (!retval) { @@ -1349,24 +1349,24 @@ static int cpia_write_proc(struct file *file, const char __user *buf, retval = size; } else DBG("error: %d\n", retval); - - up(&cam->param_lock); - + + mutex_unlock(&cam->param_lock); + out: free_page((unsigned long)page); - return retval; + return retval; } static void create_proc_cpia_cam(struct cam_data *cam) { char name[7]; struct proc_dir_entry *ent; - + if (!cpia_proc_root || !cam) return; sprintf(name, "video%d", cam->vdev.minor); - + ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root); if (!ent) return; @@ -1374,9 +1374,9 @@ static void create_proc_cpia_cam(struct cam_data *cam) ent->data = cam; ent->read_proc = cpia_read_proc; ent->write_proc = cpia_write_proc; - /* + /* size of the proc entry is 3736 bytes for the standard webcam; - the extra features of the QX3 microscope add 189 bytes. + the extra features of the QX3 microscope add 189 bytes. (we have not yet probed the camera to see which type it is). */ ent->size = 3736 + 189; @@ -1386,10 +1386,10 @@ static void create_proc_cpia_cam(struct cam_data *cam) static void destroy_proc_cpia_cam(struct cam_data *cam) { char name[7]; - + if (!cam || !cam->proc_entry) return; - + sprintf(name, "video%d", cam->vdev.minor); remove_proc_entry(name, cpia_proc_root); cam->proc_entry = NULL; @@ -1596,13 +1596,13 @@ static void set_vw_size(struct cam_data *cam) cam->vc.width = cam->vw.width; if(cam->vc.height == 0) cam->vc.height = cam->vw.height; - + cam->params.roi.colStart += cam->vc.x >> 3; cam->params.roi.colEnd = cam->params.roi.colStart + - (cam->vc.width >> 3); + (cam->vc.width >> 3); cam->params.roi.rowStart += cam->vc.y >> 2; cam->params.roi.rowEnd = cam->params.roi.rowStart + - (cam->vc.height >> 2); + (cam->vc.height >> 2); return; } @@ -1624,7 +1624,7 @@ static int allocate_frame_buf(struct cam_data *cam) static int free_frame_buf(struct cam_data *cam) { int i; - + rvfree(cam->frame_buf, FRAME_NUM*CPIA_MAX_FRAME_SIZE); cam->frame_buf = NULL; for (i=0; i < FRAME_NUM; i++) @@ -1664,10 +1664,10 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d) case CPIA_COMMAND_GetColourParams: case CPIA_COMMAND_GetColourBalance: case CPIA_COMMAND_GetExposure: - down(&cam->param_lock); + mutex_lock(&cam->param_lock); datasize=8; break; - case CPIA_COMMAND_ReadMCPorts: + case CPIA_COMMAND_ReadMCPorts: case CPIA_COMMAND_ReadVCRegs: datasize = 4; break; @@ -1691,7 +1691,7 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d) if (command == CPIA_COMMAND_GetColourParams || command == CPIA_COMMAND_GetColourBalance || command == CPIA_COMMAND_GetExposure) - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); } else { switch(command) { case CPIA_COMMAND_GetCPIAVersion: @@ -1726,13 +1726,13 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d) cam->params.colourParams.brightness = data[0]; cam->params.colourParams.contrast = data[1]; cam->params.colourParams.saturation = data[2]; - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); break; case CPIA_COMMAND_GetColourBalance: cam->params.colourBalance.redGain = data[0]; cam->params.colourBalance.greenGain = data[1]; cam->params.colourBalance.blueGain = data[2]; - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); break; case CPIA_COMMAND_GetExposure: cam->params.exposure.gain = data[0]; @@ -1743,13 +1743,13 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d) cam->params.exposure.green1Comp = data[5]; cam->params.exposure.green2Comp = data[6]; cam->params.exposure.blueComp = data[7]; - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); break; - case CPIA_COMMAND_ReadMCPorts: - if (!cam->params.qx3.qx3_detected) + case CPIA_COMMAND_ReadMCPorts: + if (!cam->params.qx3.qx3_detected) break; - /* test button press */ + /* test button press */ cam->params.qx3.button = ((data[1] & 0x02) == 0); if (cam->params.qx3.button) { /* button pressed - unlock the latch */ @@ -1770,9 +1770,9 @@ static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d) /* send a command to the camera with an additional data transaction */ static int do_command_extended(struct cam_data *cam, u16 command, - u8 a, u8 b, u8 c, u8 d, - u8 e, u8 f, u8 g, u8 h, - u8 i, u8 j, u8 k, u8 l) + u8 a, u8 b, u8 c, u8 d, + u8 e, u8 f, u8 g, u8 h, + u8 i, u8 j, u8 k, u8 l) { int retval; u8 cmd[8], data[8]; @@ -1809,10 +1809,10 @@ static int do_command_extended(struct cam_data *cam, u16 command, #define LIMIT(x) ((((x)>0xffffff)?0xff0000:(((x)<=0xffff)?0:(x)&0xff0000))>>16) static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt, - int linesize, int mmap_kludge) + int linesize, int mmap_kludge) { int y, u, v, r, g, b, y1; - + /* Odd lines use the same u and v as the previous line. * Because of compression, it is necessary to get this * information from the decoded image. */ @@ -1925,7 +1925,7 @@ static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt, static int yuvconvert(unsigned char *yuv, unsigned char *rgb, int out_fmt, - int in_uyvy, int mmap_kludge) + int in_uyvy, int mmap_kludge) { int y, u, v, r, g, b, y1; @@ -2059,7 +2059,7 @@ static int parse_picture(struct cam_data *cam, int size) int rows, cols, linesize, subsample_422; /* make sure params don't change while we are decoding */ - down(&cam->param_lock); + mutex_lock(&cam->param_lock); obuf = cam->decompressed_frame.data; end_obuf = obuf+CPIA_MAX_FRAME_SIZE; @@ -2069,55 +2069,55 @@ static int parse_picture(struct cam_data *cam, int size) if ((ibuf[0] != MAGIC_0) || (ibuf[1] != MAGIC_1)) { LOG("header not found\n"); - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return -1; } if ((ibuf[16] != VIDEOSIZE_QCIF) && (ibuf[16] != VIDEOSIZE_CIF)) { LOG("wrong video size\n"); - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return -1; } - + if (ibuf[17] != SUBSAMPLE_420 && ibuf[17] != SUBSAMPLE_422) { LOG("illegal subtype %d\n",ibuf[17]); - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return -1; } subsample_422 = ibuf[17] == SUBSAMPLE_422; - + if (ibuf[18] != YUVORDER_YUYV && ibuf[18] != YUVORDER_UYVY) { LOG("illegal yuvorder %d\n",ibuf[18]); - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return -1; } in_uyvy = ibuf[18] == YUVORDER_UYVY; - + if ((ibuf[24] != cam->params.roi.colStart) || (ibuf[25] != cam->params.roi.colEnd) || (ibuf[26] != cam->params.roi.rowStart) || (ibuf[27] != cam->params.roi.rowEnd)) { LOG("ROI mismatch\n"); - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return -1; } cols = 8*(ibuf[25] - ibuf[24]); rows = 4*(ibuf[27] - ibuf[26]); - + if ((ibuf[28] != NOT_COMPRESSED) && (ibuf[28] != COMPRESSED)) { LOG("illegal compression %d\n",ibuf[28]); - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return -1; } compressed = (ibuf[28] == COMPRESSED); - + if (ibuf[29] != NO_DECIMATION && ibuf[29] != DECIMATION_ENAB) { LOG("illegal decimation %d\n",ibuf[29]); - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return -1; } - decimation = (ibuf[29] == DECIMATION_ENAB); + decimation = (ibuf[29] == DECIMATION_ENAB); cam->params.yuvThreshold.yThreshold = ibuf[30]; cam->params.yuvThreshold.uvThreshold = ibuf[31]; @@ -2130,8 +2130,8 @@ static int parse_picture(struct cam_data *cam, int size) cam->params.status.vpStatus = ibuf[38]; cam->params.status.errorCode = ibuf[39]; cam->fps = ibuf[41]; - up(&cam->param_lock); - + mutex_unlock(&cam->param_lock); + linesize = skipcount(cols, out_fmt); ibuf += FRAME_HEADER_SIZE; size -= FRAME_HEADER_SIZE; @@ -2150,14 +2150,14 @@ static int parse_picture(struct cam_data *cam, int size) if (!compressed || (compressed && !(*ibuf & 1))) { if(subsample_422 || even_line) { obuf += yuvconvert(ibuf, obuf, out_fmt, - in_uyvy, cam->mmap_kludge); + in_uyvy, cam->mmap_kludge); ibuf += 4; ll -= 4; } else { /* SUBSAMPLE_420 on an odd line */ obuf += convert420(ibuf, obuf, - out_fmt, linesize, - cam->mmap_kludge); + out_fmt, linesize, + cam->mmap_kludge); ibuf += 2; ll -= 2; } @@ -2183,7 +2183,7 @@ static int parse_picture(struct cam_data *cam, int size) if ((size > 3) && (ibuf[0] == EOI) && (ibuf[1] == EOI) && (ibuf[2] == EOI) && (ibuf[3] == EOI)) { - size -= 4; + size -= 4; break; } @@ -2204,7 +2204,7 @@ static int parse_picture(struct cam_data *cam, int size) return -1; } } - + if(decimation) { /* interpolate odd rows */ int i, j; @@ -2233,7 +2233,7 @@ static int parse_picture(struct cam_data *cam, int size) static inline int init_stream_cap(struct cam_data *cam) { return do_command(cam, CPIA_COMMAND_InitStreamCap, - 0, cam->params.streamStartLine, 0, 0); + 0, cam->params.streamStartLine, 0, 0); } @@ -2254,7 +2254,7 @@ static int find_over_exposure(int brightness) int MaxAllowableOverExposure, OverExposure; MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness - - FLICKER_BRIGHTNESS_CONSTANT; + FLICKER_BRIGHTNESS_CONSTANT; if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE) { OverExposure = MaxAllowableOverExposure; @@ -2271,71 +2271,71 @@ static int find_over_exposure(int brightness) /* update various camera modes and settings */ static void dispatch_commands(struct cam_data *cam) { - down(&cam->param_lock); + mutex_lock(&cam->param_lock); if (cam->cmd_queue==COMMAND_NONE) { - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return; } DEB_BYTE(cam->cmd_queue); DEB_BYTE(cam->cmd_queue>>8); if (cam->cmd_queue & COMMAND_SETFORMAT) { do_command(cam, CPIA_COMMAND_SetFormat, - cam->params.format.videoSize, - cam->params.format.subSample, - cam->params.format.yuvOrder, 0); + cam->params.format.videoSize, + cam->params.format.subSample, + cam->params.format.yuvOrder, 0); do_command(cam, CPIA_COMMAND_SetROI, - cam->params.roi.colStart, cam->params.roi.colEnd, - cam->params.roi.rowStart, cam->params.roi.rowEnd); + cam->params.roi.colStart, cam->params.roi.colEnd, + cam->params.roi.rowStart, cam->params.roi.rowEnd); cam->first_frame = 1; } if (cam->cmd_queue & COMMAND_SETCOLOURPARAMS) do_command(cam, CPIA_COMMAND_SetColourParams, - cam->params.colourParams.brightness, - cam->params.colourParams.contrast, - cam->params.colourParams.saturation, 0); + cam->params.colourParams.brightness, + cam->params.colourParams.contrast, + cam->params.colourParams.saturation, 0); if (cam->cmd_queue & COMMAND_SETAPCOR) do_command(cam, CPIA_COMMAND_SetApcor, - cam->params.apcor.gain1, - cam->params.apcor.gain2, - cam->params.apcor.gain4, - cam->params.apcor.gain8); + cam->params.apcor.gain1, + cam->params.apcor.gain2, + cam->params.apcor.gain4, + cam->params.apcor.gain8); if (cam->cmd_queue & COMMAND_SETVLOFFSET) do_command(cam, CPIA_COMMAND_SetVLOffset, - cam->params.vlOffset.gain1, - cam->params.vlOffset.gain2, - cam->params.vlOffset.gain4, - cam->params.vlOffset.gain8); + cam->params.vlOffset.gain1, + cam->params.vlOffset.gain2, + cam->params.vlOffset.gain4, + cam->params.vlOffset.gain8); if (cam->cmd_queue & COMMAND_SETEXPOSURE) { do_command_extended(cam, CPIA_COMMAND_SetExposure, - cam->params.exposure.gainMode, - 1, - cam->params.exposure.compMode, - cam->params.exposure.centreWeight, - cam->params.exposure.gain, - cam->params.exposure.fineExp, - cam->params.exposure.coarseExpLo, - cam->params.exposure.coarseExpHi, - cam->params.exposure.redComp, - cam->params.exposure.green1Comp, - cam->params.exposure.green2Comp, - cam->params.exposure.blueComp); + cam->params.exposure.gainMode, + 1, + cam->params.exposure.compMode, + cam->params.exposure.centreWeight, + cam->params.exposure.gain, + cam->params.exposure.fineExp, + cam->params.exposure.coarseExpLo, + cam->params.exposure.coarseExpHi, + cam->params.exposure.redComp, + cam->params.exposure.green1Comp, + cam->params.exposure.green2Comp, + cam->params.exposure.blueComp); if(cam->params.exposure.expMode != 1) { do_command_extended(cam, CPIA_COMMAND_SetExposure, - 0, - cam->params.exposure.expMode, - 0, 0, - cam->params.exposure.gain, - cam->params.exposure.fineExp, - cam->params.exposure.coarseExpLo, - cam->params.exposure.coarseExpHi, - 0, 0, 0, 0); + 0, + cam->params.exposure.expMode, + 0, 0, + cam->params.exposure.gain, + cam->params.exposure.fineExp, + cam->params.exposure.coarseExpLo, + cam->params.exposure.coarseExpHi, + 0, 0, 0, 0); } } - + if (cam->cmd_queue & COMMAND_SETCOLOURBALANCE) { if (cam->params.colourBalance.balanceMode == 1) { do_command(cam, CPIA_COMMAND_SetColourBalance, @@ -2358,47 +2358,47 @@ static void dispatch_commands(struct cam_data *cam) if (cam->cmd_queue & COMMAND_SETCOMPRESSIONTARGET) do_command(cam, CPIA_COMMAND_SetCompressionTarget, - cam->params.compressionTarget.frTargeting, - cam->params.compressionTarget.targetFR, - cam->params.compressionTarget.targetQ, 0); + cam->params.compressionTarget.frTargeting, + cam->params.compressionTarget.targetFR, + cam->params.compressionTarget.targetQ, 0); if (cam->cmd_queue & COMMAND_SETYUVTHRESH) do_command(cam, CPIA_COMMAND_SetYUVThresh, - cam->params.yuvThreshold.yThreshold, - cam->params.yuvThreshold.uvThreshold, 0, 0); + cam->params.yuvThreshold.yThreshold, + cam->params.yuvThreshold.uvThreshold, 0, 0); if (cam->cmd_queue & COMMAND_SETCOMPRESSIONPARAMS) do_command_extended(cam, CPIA_COMMAND_SetCompressionParams, - 0, 0, 0, 0, - cam->params.compressionParams.hysteresis, - cam->params.compressionParams.threshMax, - cam->params.compressionParams.smallStep, - cam->params.compressionParams.largeStep, - cam->params.compressionParams.decimationHysteresis, - cam->params.compressionParams.frDiffStepThresh, - cam->params.compressionParams.qDiffStepThresh, - cam->params.compressionParams.decimationThreshMod); + 0, 0, 0, 0, + cam->params.compressionParams.hysteresis, + cam->params.compressionParams.threshMax, + cam->params.compressionParams.smallStep, + cam->params.compressionParams.largeStep, + cam->params.compressionParams.decimationHysteresis, + cam->params.compressionParams.frDiffStepThresh, + cam->params.compressionParams.qDiffStepThresh, + cam->params.compressionParams.decimationThreshMod); if (cam->cmd_queue & COMMAND_SETCOMPRESSION) do_command(cam, CPIA_COMMAND_SetCompression, - cam->params.compression.mode, + cam->params.compression.mode, cam->params.compression.decimation, 0, 0); if (cam->cmd_queue & COMMAND_SETSENSORFPS) do_command(cam, CPIA_COMMAND_SetSensorFPS, - cam->params.sensorFps.divisor, - cam->params.sensorFps.baserate, 0, 0); + cam->params.sensorFps.divisor, + cam->params.sensorFps.baserate, 0, 0); if (cam->cmd_queue & COMMAND_SETFLICKERCTRL) do_command(cam, CPIA_COMMAND_SetFlickerCtrl, - cam->params.flickerControl.flickerMode, - cam->params.flickerControl.coarseJump, - abs(cam->params.flickerControl.allowableOverExposure), - 0); + cam->params.flickerControl.flickerMode, + cam->params.flickerControl.coarseJump, + abs(cam->params.flickerControl.allowableOverExposure), + 0); if (cam->cmd_queue & COMMAND_SETECPTIMING) do_command(cam, CPIA_COMMAND_SetECPTiming, - cam->params.ecpTiming, 0, 0, 0); + cam->params.ecpTiming, 0, 0, 0); if (cam->cmd_queue & COMMAND_PAUSE) do_command(cam, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0); @@ -2409,24 +2409,24 @@ static void dispatch_commands(struct cam_data *cam) if (cam->cmd_queue & COMMAND_SETLIGHTS && cam->params.qx3.qx3_detected) { int p1 = (cam->params.qx3.bottomlight == 0) << 1; - int p2 = (cam->params.qx3.toplight == 0) << 3; - do_command(cam, CPIA_COMMAND_WriteVCReg, 0x90, 0x8F, 0x50, 0); - do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0); + int p2 = (cam->params.qx3.toplight == 0) << 3; + do_command(cam, CPIA_COMMAND_WriteVCReg, 0x90, 0x8F, 0x50, 0); + do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0); } cam->cmd_queue = COMMAND_NONE; - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return; } static void set_flicker(struct cam_params *params, volatile u32 *command_flags, - int on) + int on) { /* Everything in here is from the Windows driver */ #define FIRMWARE_VERSION(x,y) (params->version.firmwareVersion == (x) && \ - params->version.firmwareRevision == (y)) + params->version.firmwareRevision == (y)) /* define for compgain calculation */ #if 0 #define COMPGAIN(base, curexp, newexp) \ @@ -2441,7 +2441,7 @@ static void set_flicker(struct cam_params *params, volatile u32 *command_flags, (u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128))) #endif - + int currentexp = params->exposure.coarseExpLo + params->exposure.coarseExpHi*256; int startexp; @@ -2482,7 +2482,7 @@ static void set_flicker(struct cam_params *params, volatile u32 *command_flags, } if(FIRMWARE_VERSION(1,2)) params->exposure.compMode = 0; - else + else params->exposure.compMode = 1; params->apcor.gain1 = 0x18; @@ -2533,14 +2533,14 @@ static void set_flicker(struct cam_params *params, volatile u32 *command_flags, } #define FIRMWARE_VERSION(x,y) (cam->params.version.firmwareVersion == (x) && \ - cam->params.version.firmwareRevision == (y)) + cam->params.version.firmwareRevision == (y)) /* monitor the exposure and adjust the sensor frame rate if needed */ static void monitor_exposure(struct cam_data *cam) { u8 exp_acc, bcomp, gain, coarseL, cmd[8], data[8]; int retval, light_exp, dark_exp, very_dark_exp; int old_exposure, new_exposure, framerate; - + /* get necessary stats and register settings from camera */ /* do_command can't handle this, so do it ourselves */ cmd[0] = CPIA_COMMAND_ReadVPRegs>>8; @@ -2562,19 +2562,19 @@ static void monitor_exposure(struct cam_data *cam) gain = data[2]; coarseL = data[3]; - down(&cam->param_lock); + mutex_lock(&cam->param_lock); light_exp = cam->params.colourParams.brightness + - TC - 50 + EXP_ACC_LIGHT; + TC - 50 + EXP_ACC_LIGHT; if(light_exp > 255) light_exp = 255; dark_exp = cam->params.colourParams.brightness + - TC - 50 - EXP_ACC_DARK; + TC - 50 - EXP_ACC_DARK; if(dark_exp < 0) dark_exp = 0; very_dark_exp = dark_exp/2; - + old_exposure = cam->params.exposure.coarseExpHi * 256 + - cam->params.exposure.coarseExpLo; + cam->params.exposure.coarseExpLo; if(!cam->params.flickerControl.disabled) { /* Flicker control on */ @@ -2667,11 +2667,11 @@ static void monitor_exposure(struct cam_data *cam) cam->exposure_status = EXPOSURE_NORMAL; } } - + framerate = cam->fps; if(framerate > 30 || framerate < 1) framerate = 1; - + if(!cam->params.flickerControl.disabled) { /* Flicker control on */ if((cam->exposure_status == EXPOSURE_VERY_DARK || @@ -2683,10 +2683,10 @@ static void monitor_exposure(struct cam_data *cam) ++cam->params.sensorFps.divisor; cam->cmd_queue |= COMMAND_SETSENSORFPS; - cam->params.flickerControl.coarseJump = + cam->params.flickerControl.coarseJump = flicker_jumps[cam->mainsFreq] - [cam->params.sensorFps.baserate] - [cam->params.sensorFps.divisor]; + [cam->params.sensorFps.baserate] + [cam->params.sensorFps.divisor]; cam->cmd_queue |= COMMAND_SETFLICKERCTRL; new_exposure = cam->params.flickerControl.coarseJump-1; @@ -2704,15 +2704,15 @@ static void monitor_exposure(struct cam_data *cam) cam->params.sensorFps.divisor > 0) { /* light for too long */ - int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ; + int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ; --cam->params.sensorFps.divisor; cam->cmd_queue |= COMMAND_SETSENSORFPS; - cam->params.flickerControl.coarseJump = + cam->params.flickerControl.coarseJump = flicker_jumps[cam->mainsFreq] - [cam->params.sensorFps.baserate] - [cam->params.sensorFps.divisor]; + [cam->params.sensorFps.baserate] + [cam->params.sensorFps.divisor]; cam->cmd_queue |= COMMAND_SETFLICKERCTRL; new_exposure = cam->params.flickerControl.coarseJump-1; @@ -2762,7 +2762,7 @@ static void monitor_exposure(struct cam_data *cam) LOG("Automatically increasing sensor_fps\n"); } } - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); } /*-----------------------------------------------------------------*/ @@ -2772,36 +2772,36 @@ static void monitor_exposure(struct cam_data *cam) It also adjust the colour balance when an exposure step is detected - as long as flicker is running -*/ +*/ static void restart_flicker(struct cam_data *cam) { int cam_exposure, old_exp; if(!FIRMWARE_VERSION(1,2)) return; - down(&cam->param_lock); + mutex_lock(&cam->param_lock); if(cam->params.flickerControl.flickerMode == 0 || cam->raw_image[39] == 0) { - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); return; } cam_exposure = cam->raw_image[39]*2; old_exp = cam->params.exposure.coarseExpLo + - cam->params.exposure.coarseExpHi*256; - /* - see how far away camera exposure is from a valid - flicker exposure value - */ - cam_exposure %= cam->params.flickerControl.coarseJump; + cam->params.exposure.coarseExpHi*256; + /* + see how far away camera exposure is from a valid + flicker exposure value + */ + cam_exposure %= cam->params.flickerControl.coarseJump; if(!cam->params.flickerControl.disabled && - cam_exposure <= cam->params.flickerControl.coarseJump - 3) { + cam_exposure <= cam->params.flickerControl.coarseJump - 3) { /* Flicker control auto-disabled */ cam->params.flickerControl.disabled = 1; } - + if(cam->params.flickerControl.disabled && cam->params.flickerControl.flickerMode && old_exp > cam->params.flickerControl.coarseJump + - ROUND_UP_EXP_FOR_FLICKER) { + ROUND_UP_EXP_FOR_FLICKER) { /* exposure is now high enough to switch flicker control back on */ set_flicker(&cam->params, &cam->cmd_queue, 1); @@ -2810,7 +2810,7 @@ static void restart_flicker(struct cam_data *cam) cam->exposure_status = EXPOSURE_NORMAL; } - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); } #undef FIRMWARE_VERSION @@ -2818,7 +2818,7 @@ static int clear_stall(struct cam_data *cam) { /* FIXME: Does this actually work? */ LOG("Clearing stall\n"); - + cam->ops->streamRead(cam->lowlevel_data, cam->raw_image, 0); do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0); return cam->params.status.streamState != STREAM_PAUSED; @@ -2878,7 +2878,7 @@ static int fetch_frame(void *data) return -EINTR; do_command(cam, CPIA_COMMAND_GetCameraStatus, - 0, 0, 0, 0); + 0, 0, 0, 0); } if(cam->params.status.streamState != STREAM_READY) { continue; @@ -2903,18 +2903,18 @@ static int fetch_frame(void *data) /* Switch flicker control back on if it got turned off */ restart_flicker(cam); - + /* If AEC is enabled, monitor the exposure and adjust the sensor frame rate if needed */ if(cam->params.exposure.expMode == 2) monitor_exposure(cam); - + /* camera idle now so dispatch queued commands */ dispatch_commands(cam); /* Update our knowledge of the camera state */ - do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0); - do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0); + do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0); + do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0); do_command(cam, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0); /* decompress and convert image to by copying it from @@ -2933,7 +2933,7 @@ static int fetch_frame(void *data) uncompressed. */ cam->first_frame = 1; do_command(cam, CPIA_COMMAND_SetGrabMode, - CPIA_GRAB_SINGLE, 0, 0, 0); + CPIA_GRAB_SINGLE, 0, 0, 0); /* FIXME: Trial & error - need up to 70ms for the grab mode change to complete ? */ msleep_interruptible(70); @@ -2957,12 +2957,12 @@ static int fetch_frame(void *data) if (cam->first_frame) { cam->first_frame = 0; do_command(cam, CPIA_COMMAND_SetCompression, - cam->params.compression.mode, + cam->params.compression.mode, cam->params.compression.decimation, 0, 0); /* Switch from single-grab to continuous grab */ do_command(cam, CPIA_COMMAND_SetGrabMode, - CPIA_GRAB_CONTINUOUS, 0, 0, 0); + CPIA_GRAB_CONTINUOUS, 0, 0, 0); } return 0; } @@ -2977,12 +2977,12 @@ static int capture_frame(struct cam_data *cam, struct video_mmap *vm) if ((err = allocate_frame_buf(cam))) return err; } - + cam->curframe = vm->frame; cam->frame[cam->curframe].state = FRAME_READY; return fetch_frame(cam); } - + static int goto_high_power(struct cam_data *cam) { if (do_command(cam, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0)) @@ -3039,22 +3039,22 @@ static void save_camera_state(struct cam_data *cam) static int set_camera_state(struct cam_data *cam) { cam->cmd_queue = COMMAND_SETCOMPRESSION | - COMMAND_SETCOMPRESSIONTARGET | - COMMAND_SETCOLOURPARAMS | - COMMAND_SETFORMAT | - COMMAND_SETYUVTHRESH | - COMMAND_SETECPTIMING | - COMMAND_SETCOMPRESSIONPARAMS | - COMMAND_SETEXPOSURE | - COMMAND_SETCOLOURBALANCE | - COMMAND_SETSENSORFPS | - COMMAND_SETAPCOR | - COMMAND_SETFLICKERCTRL | - COMMAND_SETVLOFFSET; + COMMAND_SETCOMPRESSIONTARGET | + COMMAND_SETCOLOURPARAMS | + COMMAND_SETFORMAT | + COMMAND_SETYUVTHRESH | + COMMAND_SETECPTIMING | + COMMAND_SETCOMPRESSIONPARAMS | + COMMAND_SETEXPOSURE | + COMMAND_SETCOLOURBALANCE | + COMMAND_SETSENSORFPS | + COMMAND_SETAPCOR | + COMMAND_SETFLICKERCTRL | + COMMAND_SETVLOFFSET; do_command(cam, CPIA_COMMAND_SetGrabMode, CPIA_GRAB_SINGLE,0,0,0); dispatch_commands(cam); - + /* Wait 6 frames for the sensor to get all settings and AEC/ACB to settle */ msleep_interruptible(6*(cam->params.sensorFps.baserate ? 33 : 40) * @@ -3062,7 +3062,7 @@ static int set_camera_state(struct cam_data *cam) if(signal_pending(current)) return -EINTR; - + save_camera_state(cam); return 0; @@ -3094,9 +3094,9 @@ static int reset_camera(struct cam_data *cam) if (goto_low_power(cam)) return -ENODEV; } - + /* procedure described in developer's guide p3-28 */ - + /* Check the firmware version. */ cam->params.version.firmwareVersion = 0; get_version_information(cam); @@ -3113,14 +3113,14 @@ static int reset_camera(struct cam_data *cam) cam->params.qx3.qx3_detected = (cam->params.pnpID.vendor == 0x0813 && cam->params.pnpID.product == 0x0001); - /* The fatal error checking should be done after + /* The fatal error checking should be done after * the camera powers up (developer's guide p 3-38) */ /* Set streamState before transition to high power to avoid bug * in firmware 1-02 */ do_command(cam, CPIA_COMMAND_ModifyCameraStatus, STREAMSTATE, 0, - STREAM_NOT_READY, 0); - + STREAM_NOT_READY, 0); + /* GotoHiPower */ err = goto_high_power(cam); if (err) @@ -3142,16 +3142,16 @@ static int reset_camera(struct cam_data *cam) /* Firmware 1-02 may do this for parallel port cameras, * just clear the flags (developer's guide p 3-38) */ do_command(cam, CPIA_COMMAND_ModifyCameraStatus, - FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0); + FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0); } } - + /* Check the camera status again */ if (cam->params.status.fatalError) { if (cam->params.status.fatalError) return -EIO; } - + /* VPVersion can't be retrieved before the camera is in HiPower, * so get it here instead of in get_version_information. */ do_command(cam, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0); @@ -3186,31 +3186,31 @@ static int cpia_open(struct inode *inode, struct file *file) if (!try_module_get(cam->ops->owner)) return -ENODEV; - down(&cam->busy_lock); + mutex_lock(&cam->busy_lock); err = -ENOMEM; if (!cam->raw_image) { cam->raw_image = rvmalloc(CPIA_MAX_IMAGE_SIZE); if (!cam->raw_image) goto oops; } - + if (!cam->decompressed_frame.data) { cam->decompressed_frame.data = rvmalloc(CPIA_MAX_FRAME_SIZE); if (!cam->decompressed_frame.data) goto oops; } - + /* open cpia */ err = -ENODEV; if (cam->ops->open(cam->lowlevel_data)) goto oops; - + /* reset the camera */ if ((err = reset_camera(cam)) != 0) { cam->ops->close(cam->lowlevel_data); goto oops; } - + err = -EINTR; if(signal_pending(current)) goto oops; @@ -3224,10 +3224,10 @@ static int cpia_open(struct inode *inode, struct file *file) /* init it to something */ cam->mmap_kludge = 0; - + ++cam->open_count; file->private_data = dev; - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return 0; oops: @@ -3239,7 +3239,7 @@ static int cpia_open(struct inode *inode, struct file *file) rvfree(cam->raw_image, CPIA_MAX_IMAGE_SIZE); cam->raw_image = NULL; } - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); put_cam(cam->ops); return err; } @@ -3250,10 +3250,10 @@ static int cpia_close(struct inode *inode, struct file *file) struct cam_data *cam = dev->priv; if (cam->ops) { - /* Return ownership of /proc/cpia/videoX to root */ + /* Return ownership of /proc/cpia/videoX to root */ if(cam->proc_entry) cam->proc_entry->uid = 0; - + /* save camera state for later open (developers guide ch 3.5.3) */ save_camera_state(cam); @@ -3303,24 +3303,24 @@ static ssize_t cpia_read(struct file *file, char __user *buf, int err; /* make this _really_ smp and multithread-safe */ - if (down_interruptible(&cam->busy_lock)) + if (mutex_lock_interruptible(&cam->busy_lock)) return -EINTR; if (!buf) { DBG("buf NULL\n"); - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return -EINVAL; } if (!count) { DBG("count 0\n"); - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return 0; } if (!cam->ops) { DBG("ops NULL\n"); - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return -ENODEV; } @@ -3329,7 +3329,7 @@ static ssize_t cpia_read(struct file *file, char __user *buf, cam->mmap_kludge=0; if((err = fetch_frame(cam)) != 0) { DBG("ERROR from fetch_frame: %d\n", err); - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return err; } cam->decompressed_frame.state = FRAME_UNUSED; @@ -3338,17 +3338,17 @@ static ssize_t cpia_read(struct file *file, char __user *buf, if (cam->decompressed_frame.count > count) { DBG("count wrong: %d, %lu\n", cam->decompressed_frame.count, (unsigned long) count); - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return -EFAULT; } if (copy_to_user(buf, cam->decompressed_frame.data, - cam->decompressed_frame.count)) { + cam->decompressed_frame.count)) { DBG("copy_to_user failed\n"); - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return -EFAULT; } - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return cam->decompressed_frame.count; } @@ -3361,9 +3361,9 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, if (!cam || !cam->ops) return -ENODEV; - + /* make this _really_ smp-safe */ - if (down_interruptible(&cam->busy_lock)) + if (mutex_lock_interruptible(&cam->busy_lock)) return -EINTR; //DBG("cpia_ioctl: %u\n", ioctlnr); @@ -3405,7 +3405,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, v->norm = 0; break; } - + case VIDIOCSCHAN: { struct video_channel *v = arg; @@ -3424,7 +3424,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, *pic = cam->vp; break; } - + case VIDIOCSPICT: { struct video_picture *vp = arg; @@ -3439,7 +3439,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, break; } - down(&cam->param_lock); + mutex_lock(&cam->param_lock); /* brightness, colour, contrast need no check 0-65535 */ cam->vp = *vp; /* update cam->params.colourParams */ @@ -3458,15 +3458,15 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, /* Adjust flicker control if necessary */ if(cam->params.flickerControl.allowableOverExposure < 0) - cam->params.flickerControl.allowableOverExposure = + cam->params.flickerControl.allowableOverExposure = -find_over_exposure(cam->params.colourParams.brightness); if(cam->params.flickerControl.flickerMode != 0) cam->cmd_queue |= COMMAND_SETFLICKERCTRL; - + /* queue command to update camera */ cam->cmd_queue |= COMMAND_SETCOLOURPARAMS; - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); DBG("VIDIOCSPICT: %d / %d // %d / %d / %d / %d\n", vp->depth, vp->palette, vp->brightness, vp->hue, vp->colour, vp->contrast); @@ -3482,7 +3482,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, *vw = cam->vw; break; } - + case VIDIOCSWIN: { /* copy_from_user, check validity, copy to internal structure */ @@ -3501,26 +3501,26 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, /* we set the video window to something smaller or equal to what * is requested by the user??? */ - down(&cam->param_lock); + mutex_lock(&cam->param_lock); if (vw->width != cam->vw.width || vw->height != cam->vw.height) { int video_size = match_videosize(vw->width, vw->height); if (video_size < 0) { retval = -EINVAL; - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); break; } cam->video_size = video_size; /* video size is changing, reset the subcapture area */ memset(&cam->vc, 0, sizeof(cam->vc)); - + set_vw_size(cam); DBG("%d / %d\n", cam->vw.width, cam->vw.height); cam->cmd_queue |= COMMAND_SETFORMAT; } - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); /* setformat ignored by camera during streaming, * so stop/dispatch/start */ @@ -3547,7 +3547,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, vm->offsets[i] = CPIA_MAX_FRAME_SIZE * i; break; } - + case VIDIOCMCAPTURE: { struct video_mmap *vm = arg; @@ -3597,7 +3597,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, /* video size is changing, reset the subcapture area */ memset(&cam->vc, 0, sizeof(cam->vc)); - + set_vw_size(cam); cam->cmd_queue |= COMMAND_SETFORMAT; dispatch_commands(cam); @@ -3608,7 +3608,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, break; } - + case VIDIOCSYNC: { int *frame = arg; @@ -3649,7 +3649,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, *vc = cam->vc; break; - } + } case VIDIOCSCAPTURE: { @@ -3665,7 +3665,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, retval = -EINVAL; break; } - + /* Clip to the resolution we can set for the ROI (every 8 columns and 4 rows) */ vc->x = vc->x & ~(__u32)7; @@ -3681,25 +3681,25 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, } DBG("%d,%d/%dx%d\n", vc->x,vc->y,vc->width, vc->height); - - down(&cam->param_lock); - + + mutex_lock(&cam->param_lock); + cam->vc.x = vc->x; cam->vc.y = vc->y; cam->vc.width = vc->width; cam->vc.height = vc->height; - + set_vw_size(cam); cam->cmd_queue |= COMMAND_SETFORMAT; - up(&cam->param_lock); + mutex_unlock(&cam->param_lock); /* setformat ignored by camera during streaming, * so stop/dispatch/start */ dispatch_commands(cam); break; } - + case VIDIOCGUNIT: { struct video_unit *vu = arg; @@ -3715,7 +3715,7 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, break; } - + /* pointless to implement overlay with this camera */ case VIDIOCCAPTURE: case VIDIOCGFBUF: @@ -3736,9 +3736,9 @@ static int cpia_do_ioctl(struct inode *inode, struct file *file, break; } - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return retval; -} +} static int cpia_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) @@ -3759,7 +3759,7 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma) if (!cam || !cam->ops) return -ENODEV; - + DBG("cpia_mmap: %ld\n", size); if (size > FRAME_NUM*CPIA_MAX_FRAME_SIZE) @@ -3767,14 +3767,14 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma) if (!cam || !cam->ops) return -ENODEV; - + /* make this _really_ smp-safe */ - if (down_interruptible(&cam->busy_lock)) + if (mutex_lock_interruptible(&cam->busy_lock)) return -EINTR; if (!cam->frame_buf) { /* we do lazy allocation */ if ((retval = allocate_frame_buf(cam))) { - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return retval; } } @@ -3783,7 +3783,7 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma) while (size > 0) { page = vmalloc_to_pfn((void *)pos); if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return -EAGAIN; } start += PAGE_SIZE; @@ -3795,7 +3795,7 @@ static int cpia_mmap(struct file *file, struct vm_area_struct *vma) } DBG("cpia_mmap: %ld\n", size); - up(&cam->busy_lock); + mutex_unlock(&cam->busy_lock); return 0; } @@ -3851,11 +3851,11 @@ static void reset_camera_struct(struct cam_data *cam) cam->params.flickerControl.flickerMode = 0; cam->params.flickerControl.disabled = 1; - cam->params.flickerControl.coarseJump = + cam->params.flickerControl.coarseJump = flicker_jumps[cam->mainsFreq] - [cam->params.sensorFps.baserate] - [cam->params.sensorFps.divisor]; - cam->params.flickerControl.allowableOverExposure = + [cam->params.sensorFps.baserate] + [cam->params.sensorFps.divisor]; + cam->params.flickerControl.allowableOverExposure = -find_over_exposure(cam->params.colourParams.brightness); cam->params.vlOffset.gain1 = 20; cam->params.vlOffset.gain2 = 24; @@ -3870,21 +3870,21 @@ static void reset_camera_struct(struct cam_data *cam) cam->params.compressionParams.qDiffStepThresh = 3; cam->params.compressionParams.decimationThreshMod = 2; /* End of default values from Software Developer's Guide */ - + cam->transfer_rate = 0; cam->exposure_status = EXPOSURE_NORMAL; - + /* Set Sensor FPS to 15fps. This seems better than 30fps * for indoor lighting. */ cam->params.sensorFps.divisor = 1; cam->params.sensorFps.baserate = 1; - + cam->params.yuvThreshold.yThreshold = 6; /* From windows driver */ cam->params.yuvThreshold.uvThreshold = 6; /* From windows driver */ - + cam->params.format.subSample = SUBSAMPLE_422; cam->params.format.yuvOrder = YUVORDER_YUYV; - + cam->params.compression.mode = CPIA_COMPRESSION_AUTO; cam->params.compressionTarget.frTargeting = CPIA_COMPRESSION_TARGET_QUALITY; @@ -3898,7 +3898,7 @@ static void reset_camera_struct(struct cam_data *cam) cam->params.qx3.cradled = 0; cam->video_size = VIDEOSIZE_CIF; - + cam->vp.colour = 32768; /* 50% */ cam->vp.hue = 32768; /* 50% */ cam->vp.brightness = 32768; /* 50% */ @@ -3911,7 +3911,7 @@ static void reset_camera_struct(struct cam_data *cam) cam->vc.y = 0; cam->vc.width = 0; cam->vc.height = 0; - + cam->vw.x = 0; cam->vw.y = 0; set_vw_size(cam); @@ -3928,7 +3928,7 @@ static void reset_camera_struct(struct cam_data *cam) /* initialize cam_data structure */ static void init_camera_struct(struct cam_data *cam, - struct cpia_camera_ops *ops ) + struct cpia_camera_ops *ops ) { int i; @@ -3936,8 +3936,8 @@ static void init_camera_struct(struct cam_data *cam, memset(cam, 0, sizeof(struct cam_data)); cam->ops = ops; - init_MUTEX(&cam->param_lock); - init_MUTEX(&cam->busy_lock); + mutex_init(&cam->param_lock); + mutex_init(&cam->busy_lock); reset_camera_struct(cam); @@ -3945,7 +3945,7 @@ static void init_camera_struct(struct cam_data *cam, memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template)); cam->vdev.priv = cam; - + cam->curframe = 0; for (i = 0; i < FRAME_NUM; i++) { cam->frame[i].width = 0; @@ -3961,15 +3961,15 @@ static void init_camera_struct(struct cam_data *cam, struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel) { - struct cam_data *camera; - + struct cam_data *camera; + if ((camera = kmalloc(sizeof(struct cam_data), GFP_KERNEL)) == NULL) return NULL; - + init_camera_struct( camera, ops ); camera->lowlevel_data = lowlevel; - + /* register v4l device */ if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { kfree(camera); @@ -3982,7 +3982,7 @@ struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowleve /* open cpia */ if (camera->ops->open(camera->lowlevel_data)) return camera; - + /* reset the camera */ if (reset_camera(camera) != 0) { camera->ops->close(camera->lowlevel_data); @@ -4022,11 +4022,11 @@ void cpia_unregister_camera(struct cam_data *cam) DBG("camera open -- setting ops to NULL\n"); cam->ops = NULL; } - + #ifdef CONFIG_PROC_FS DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor); destroy_proc_cpia_cam(cam); -#endif +#endif if (!cam->open_count) { DBG("freeing camera\n"); kfree(cam); diff --git a/drivers/media/video/cpia.h b/drivers/media/video/cpia.h index f629b693ee65..dde27a6a4a09 100644 --- a/drivers/media/video/cpia.h +++ b/drivers/media/video/cpia.h @@ -47,14 +47,15 @@ #include <linux/videodev.h> #include <linux/list.h> #include <linux/smp_lock.h> +#include <linux/mutex.h> struct cpia_camera_ops { /* open sets privdata to point to structure for this camera. - * Returns negative value on error, otherwise 0. + * Returns negative value on error, otherwise 0. */ int (*open)(void *privdata); - + /* Registers callback function cb to be called with cbdata * when an image is ready. If cb is NULL, only single image grabs * should be used. cb should immediately call streamRead to read @@ -62,8 +63,8 @@ struct cpia_camera_ops * otherwise 0. */ int (*registerCallback)(void *privdata, void (*cb)(void *cbdata), - void *cbdata); - + void *cbdata); + /* transferCmd sends commands to the camera. command MUST point to * an 8 byte buffer in kernel space. data can be NULL if no extra * data is needed. The size of the data is given by the last 2 @@ -76,30 +77,30 @@ struct cpia_camera_ops * Returns negative value on error, otherwise 0. */ int (*streamStart)(void *privdata); - + /* streamStop terminates stream capture mode. * Returns negative value on error, otherwise 0. */ int (*streamStop)(void *privdata); - + /* streamRead reads a frame from the camera. buffer points to a - * buffer large enough to hold a complete frame in kernel space. - * noblock indicates if this should be a non blocking read. + * buffer large enough to hold a complete frame in kernel space. + * noblock indicates if this should be a non blocking read. * Returns the number of bytes read, or negative value on error. - */ + */ int (*streamRead)(void *privdata, u8 *buffer, int noblock); - + /* close disables the device until open() is called again. * Returns negative value on error, otherwise 0. */ int (*close)(void *privdata); - + /* If wait_for_stream_ready is non-zero, wait until the streamState * is STREAM_READY before calling streamRead. */ int wait_for_stream_ready; - /* + /* * Used to maintain lowlevel module usage counts */ struct module *owner; @@ -214,14 +215,14 @@ struct cam_params { u8 videoSize; /* CIF/QCIF */ u8 subSample; u8 yuvOrder; - } format; - struct { /* Intel QX3 specific data */ - u8 qx3_detected; /* a QX3 is present */ - u8 toplight; /* top light lit , R/W */ - u8 bottomlight; /* bottom light lit, R/W */ - u8 button; /* snapshot button pressed (R/O) */ - u8 cradled; /* microscope is in cradle (R/O) */ - } qx3; + } format; + struct { /* Intel QX3 specific data */ + u8 qx3_detected; /* a QX3 is present */ + u8 toplight; /* top light lit , R/W */ + u8 bottomlight; /* bottom light lit, R/W */ + u8 button; /* snapshot button pressed (R/O) */ + u8 cradled; /* microscope is in cradle (R/O) */ + } qx3; struct { u8 colStart; /* skip first 8*colStart pixels */ u8 colEnd; /* finish at 8*colEnd pixels */ @@ -246,13 +247,13 @@ enum v4l_camstates { struct cam_data { struct list_head cam_data_list; - struct semaphore busy_lock; /* guard against SMP multithreading */ + struct mutex busy_lock; /* guard against SMP multithreading */ struct cpia_camera_ops *ops; /* lowlevel driver operations */ void *lowlevel_data; /* private data for lowlevel driver */ u8 *raw_image; /* buffer for raw image data */ struct cpia_frame decompressed_frame; - /* buffer to hold decompressed frame */ - int image_size; /* sizeof last decompressed image */ + /* buffer to hold decompressed frame */ + int image_size; /* sizeof last decompressed image */ int open_count; /* # of process that have camera open */ /* camera status */ @@ -261,10 +262,10 @@ struct cam_data { u8 mainsFreq; /* for flicker control */ /* proc interface */ - struct semaphore param_lock; /* params lock for this camera */ + struct mutex param_lock; /* params lock for this camera */ struct cam_params params; /* camera settings */ struct proc_dir_entry *proc_entry; /* /proc/cpia/videoX */ - + /* v4l */ int video_size; /* VIDEO_SIZE_ */ volatile enum v4l_camstates camstate; /* v4l layer status */ @@ -276,7 +277,7 @@ struct cam_data { /* mmap interface */ int curframe; /* the current frame to grab into */ u8 *frame_buf; /* frame buffer data */ - struct cpia_frame frame[FRAME_NUM]; + struct cpia_frame frame[FRAME_NUM]; /* FRAME_NUM-buffering, so we need a array */ int first_frame; @@ -423,7 +424,7 @@ void cpia_unregister_camera(struct cam_data *cam); #define DEB_BYTE(p)\ DBG("%1d %1d %1d %1d %1d %1d %1d %1d \n",\ (p)&0x80?1:0, (p)&0x40?1:0, (p)&0x20?1:0, (p)&0x10?1:0,\ - (p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0); + (p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0); #endif /* __KERNEL__ */ diff --git a/drivers/media/video/cpia2/Kconfig b/drivers/media/video/cpia2/Kconfig new file mode 100644 index 000000000000..513cc0927389 --- /dev/null +++ b/drivers/media/video/cpia2/Kconfig @@ -0,0 +1,9 @@ +config VIDEO_CPIA2 + tristate "CPiA2 Video For Linux" + depends on VIDEO_DEV && USB + ---help--- + This is the video4linux driver for cameras based on Vision's CPiA2 + (Colour Processor Interface ASIC), such as the Digital Blue QX5 + Microscope. If you have one of these cameras, say Y here + + This driver is also available as a module (cpia2). diff --git a/drivers/media/video/cpia2/Makefile b/drivers/media/video/cpia2/Makefile new file mode 100644 index 000000000000..828cf1b1df86 --- /dev/null +++ b/drivers/media/video/cpia2/Makefile @@ -0,0 +1,3 @@ +cpia2-objs := cpia2_v4l.o cpia2_usb.o cpia2_core.o + +obj-$(CONFIG_VIDEO_CPIA2) += cpia2.o diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h new file mode 100644 index 000000000000..8394283993f6 --- /dev/null +++ b/drivers/media/video/cpia2/cpia2.h @@ -0,0 +1,497 @@ +/**************************************************************************** + * + * Filename: cpia2.h + * + * Copyright 2001, STMicrolectronics, Inc. + * + * Contact: steve.miller@st.com + * + * Description: + * This is a USB driver for CPiA2 based video cameras. + * + * This driver is modelled on the cpia usb driver by + * Jochen Scharrlach and Johannes Erdfeldt. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ****************************************************************************/ + +#ifndef __CPIA2_H__ +#define __CPIA2_H__ + +#include <linux/version.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/poll.h> + +#include "cpia2dev.h" +#include "cpia2_registers.h" + +/* define for verbose debug output */ +//#define _CPIA2_DEBUG_ + +#define CPIA2_MAJ_VER 2 +#define CPIA2_MIN_VER 0 +#define CPIA2_PATCH_VER 0 + +/*** + * Image defines + ***/ +#ifndef true +#define true 1 +#define false 0 +#endif + +/* Misc constants */ +#define ALLOW_CORRUPT 0 /* Causes collater to discard checksum */ + +/* USB Transfer mode */ +#define XFER_ISOC 0 +#define XFER_BULK 1 + +/* USB Alternates */ +#define USBIF_CMDONLY 0 +#define USBIF_BULK 1 +#define USBIF_ISO_1 2 /* 128 bytes/ms */ +#define USBIF_ISO_2 3 /* 384 bytes/ms */ +#define USBIF_ISO_3 4 /* 640 bytes/ms */ +#define USBIF_ISO_4 5 /* 768 bytes/ms */ +#define USBIF_ISO_5 6 /* 896 bytes/ms */ +#define USBIF_ISO_6 7 /* 1023 bytes/ms */ + +/* Flicker Modes */ +#define NEVER_FLICKER 0 +#define ANTI_FLICKER_ON 1 +#define FLICKER_60 60 +#define FLICKER_50 50 + +/* Debug flags */ +#define DEBUG_NONE 0 +#define DEBUG_REG 0x00000001 +#define DEBUG_DUMP_PATCH 0x00000002 +#define DEBUG_DUMP_REGS 0x00000004 + +/*** + * Video frame sizes + ***/ +enum { + VIDEOSIZE_VGA = 0, /* 640x480 */ + VIDEOSIZE_CIF, /* 352x288 */ + VIDEOSIZE_QVGA, /* 320x240 */ + VIDEOSIZE_QCIF, /* 176x144 */ + VIDEOSIZE_288_216, + VIDEOSIZE_256_192, + VIDEOSIZE_224_168, + VIDEOSIZE_192_144, +}; + +#define STV_IMAGE_CIF_ROWS 288 +#define STV_IMAGE_CIF_COLS 352 + +#define STV_IMAGE_QCIF_ROWS 144 +#define STV_IMAGE_QCIF_COLS 176 + +#define STV_IMAGE_VGA_ROWS 480 +#define STV_IMAGE_VGA_COLS 640 + +#define STV_IMAGE_QVGA_ROWS 240 +#define STV_IMAGE_QVGA_COLS 320 + +#define JPEG_MARKER_COM (1<<6) /* Comment segment */ + +/*** + * Enums + ***/ +/* Sensor types available with cpia2 asics */ +enum sensors { + CPIA2_SENSOR_410, + CPIA2_SENSOR_500 +}; + +/* Asic types available in the CPiA2 architecture */ +#define CPIA2_ASIC_672 0x67 + +/* Device types (stv672, stv676, etc) */ +#define DEVICE_STV_672 0x0001 +#define DEVICE_STV_676 0x0002 + +enum frame_status { + FRAME_EMPTY, + FRAME_READING, /* In the process of being grabbed into */ + FRAME_READY, /* Ready to be read */ + FRAME_ERROR, +}; + +/*** + * Register access (for USB request byte) + ***/ +enum { + CAMERAACCESS_SYSTEM = 0, + CAMERAACCESS_VC, + CAMERAACCESS_VP, + CAMERAACCESS_IDATA +}; + +#define CAMERAACCESS_TYPE_BLOCK 0x00 +#define CAMERAACCESS_TYPE_RANDOM 0x04 +#define CAMERAACCESS_TYPE_MASK 0x08 +#define CAMERAACCESS_TYPE_REPEAT 0x0C + +#define TRANSFER_READ 0 +#define TRANSFER_WRITE 1 + +#define DEFAULT_ALT USBIF_ISO_6 +#define DEFAULT_BRIGHTNESS 0x46 +#define DEFAULT_CONTRAST 0x93 +#define DEFAULT_SATURATION 0x7f +#define DEFAULT_TARGET_KB 0x30 + +/* Power state */ +#define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER +#define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER + + +/******** + * Commands + *******/ +enum { + CPIA2_CMD_NONE = 0, + CPIA2_CMD_GET_VERSION, + CPIA2_CMD_GET_PNP_ID, + CPIA2_CMD_GET_ASIC_TYPE, + CPIA2_CMD_GET_SENSOR, + CPIA2_CMD_GET_VP_DEVICE, + CPIA2_CMD_GET_VP_BRIGHTNESS, + CPIA2_CMD_SET_VP_BRIGHTNESS, + CPIA2_CMD_GET_CONTRAST, + CPIA2_CMD_SET_CONTRAST, + CPIA2_CMD_GET_VP_SATURATION, + CPIA2_CMD_SET_VP_SATURATION, + CPIA2_CMD_GET_VP_GPIO_DIRECTION, + CPIA2_CMD_SET_VP_GPIO_DIRECTION, + CPIA2_CMD_GET_VP_GPIO_DATA, + CPIA2_CMD_SET_VP_GPIO_DATA, + CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION, + CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, + CPIA2_CMD_GET_VC_MP_GPIO_DATA, + CPIA2_CMD_SET_VC_MP_GPIO_DATA, + CPIA2_CMD_ENABLE_PACKET_CTRL, + CPIA2_CMD_GET_FLICKER_MODES, + CPIA2_CMD_SET_FLICKER_MODES, + CPIA2_CMD_RESET_FIFO, /* clear fifo and enable stream block */ + CPIA2_CMD_SET_HI_POWER, + CPIA2_CMD_SET_LOW_POWER, + CPIA2_CMD_CLEAR_V2W_ERR, + CPIA2_CMD_SET_USER_MODE, + CPIA2_CMD_GET_USER_MODE, + CPIA2_CMD_FRAMERATE_REQ, + CPIA2_CMD_SET_COMPRESSION_STATE, + CPIA2_CMD_GET_WAKEUP, + CPIA2_CMD_SET_WAKEUP, + CPIA2_CMD_GET_PW_CONTROL, + CPIA2_CMD_SET_PW_CONTROL, + CPIA2_CMD_GET_SYSTEM_CTRL, + CPIA2_CMD_SET_SYSTEM_CTRL, + CPIA2_CMD_GET_VP_SYSTEM_STATE, + CPIA2_CMD_GET_VP_SYSTEM_CTRL, + CPIA2_CMD_SET_VP_SYSTEM_CTRL, + CPIA2_CMD_GET_VP_EXP_MODES, + CPIA2_CMD_SET_VP_EXP_MODES, + CPIA2_CMD_GET_DEVICE_CONFIG, + CPIA2_CMD_SET_DEVICE_CONFIG, + CPIA2_CMD_SET_SERIAL_ADDR, + CPIA2_CMD_SET_SENSOR_CR1, + CPIA2_CMD_GET_VC_CONTROL, + CPIA2_CMD_SET_VC_CONTROL, + CPIA2_CMD_SET_TARGET_KB, + CPIA2_CMD_SET_DEF_JPEG_OPT, + CPIA2_CMD_REHASH_VP4, + CPIA2_CMD_GET_USER_EFFECTS, + CPIA2_CMD_SET_USER_EFFECTS +}; + +enum user_cmd { + COMMAND_NONE = 0x00000001, + COMMAND_SET_FPS = 0x00000002, + COMMAND_SET_COLOR_PARAMS = 0x00000004, + COMMAND_GET_COLOR_PARAMS = 0x00000008, + COMMAND_SET_FORMAT = 0x00000010, /* size, etc */ + COMMAND_SET_FLICKER = 0x00000020 +}; + +/*** + * Some defines specific to the 676 chip + ***/ +#define CAMACC_CIF 0x01 +#define CAMACC_VGA 0x02 +#define CAMACC_QCIF 0x04 +#define CAMACC_QVGA 0x08 + + +struct cpia2_register { + u8 index; + u8 value; +}; + +struct cpia2_reg_mask { + u8 index; + u8 and_mask; + u8 or_mask; + u8 fill; +}; + +struct cpia2_command { + u32 command; + u8 req_mode; /* (Block or random) | registerBank */ + u8 reg_count; + u8 direction; + u8 start; + union reg_types { + struct cpia2_register registers[32]; + struct cpia2_reg_mask masks[16]; + u8 block_data[64]; + u8 *patch_data; /* points to function defined block */ + } buffer; +}; + +struct camera_params { + struct { + u8 firmware_revision_hi; /* For system register set (bank 0) */ + u8 firmware_revision_lo; + u8 asic_id; /* Video Compressor set (bank 1) */ + u8 asic_rev; + u8 vp_device_hi; /* Video Processor set (bank 2) */ + u8 vp_device_lo; + u8 sensor_flags; + u8 sensor_rev; + } version; + + struct { + u32 device_type; /* enumerated from vendor/product ids. + * Currently, either STV_672 or STV_676 */ + u16 vendor; + u16 product; + u16 device_revision; + } pnp_id; + + struct { + u8 brightness; /* CPIA2_VP_EXPOSURE_TARGET */ + u8 contrast; /* Note: this is CPIA2_VP_YRANGE */ + u8 saturation; /* CPIA2_VP_SATURATION */ + } color_params; + + struct { + u8 cam_register; + u8 flicker_mode_req; /* 1 if flicker on, else never flicker */ + int mains_frequency; + } flicker_control; + + struct { + u8 jpeg_options; + u8 creep_period; + u8 user_squeeze; + u8 inhibit_htables; + } compression; + + struct { + u8 ohsize; /* output image size */ + u8 ovsize; + u8 hcrop; /* cropping start_pos/4 */ + u8 vcrop; + u8 hphase; /* scaling registers */ + u8 vphase; + u8 hispan; + u8 vispan; + u8 hicrop; + u8 vicrop; + u8 hifraction; + u8 vifraction; + } image_size; + + struct { + int width; /* actual window width */ + int height; /* actual window height */ + } roi; + + struct { + u8 video_mode; + u8 frame_rate; + u8 video_size; /* Not a register, just a convenience for cropped sizes */ + u8 gpio_direction; + u8 gpio_data; + u8 system_ctrl; + u8 system_state; + u8 lowlight_boost; /* Bool: 0 = off, 1 = on */ + u8 device_config; + u8 exposure_modes; + u8 user_effects; + } vp_params; + + struct { + u8 pw_control; + u8 wakeup; + u8 vc_control; + u8 vc_mp_direction; + u8 vc_mp_data; + u8 target_kb; + } vc_params; + + struct { + u8 power_mode; + u8 system_ctrl; + u8 stream_mode; /* This is the current alternate for usb drivers */ + u8 allow_corrupt; + } camera_state; +}; + +#define NUM_SBUF 2 + +struct cpia2_sbuf { + char *data; + struct urb *urb; +}; + +struct framebuf { + struct timeval timestamp; + unsigned long seq; + int num; + int length; + int max_length; + volatile enum frame_status status; + u8 *data; + struct framebuf *next; +}; + +struct cpia2_fh { + enum v4l2_priority prio; + u8 mmapped; +}; + +struct camera_data { + /* locks */ + struct mutex busy_lock; /* guard against SMP multithreading */ + struct v4l2_prio_state prio; + + /* camera status */ + volatile int present; /* Is the camera still present? */ + int open_count; /* # of process that have camera open */ + int first_image_seen; + u8 mains_freq; /* for flicker control */ + enum sensors sensor_type; + u8 flush; + u8 mmapped; + int streaming; /* 0 = no, 1 = yes */ + int xfer_mode; /* XFER_BULK or XFER_ISOC */ + struct camera_params params; /* camera settings */ + + /* v4l */ + int video_size; /* VIDEO_SIZE_ */ + struct video_device *vdev; /* v4l videodev */ + struct video_picture vp; /* v4l camera settings */ + struct video_window vw; /* v4l capture area */ + __u32 pixelformat; /* Format fourcc */ + + /* USB */ + struct usb_device *dev; + unsigned char iface; + unsigned int cur_alt; + unsigned int old_alt; + struct cpia2_sbuf sbuf[NUM_SBUF]; /* Double buffering */ + + wait_queue_head_t wq_stream; + + /* Buffering */ + u32 frame_size; + int num_frames; + unsigned long frame_count; + u8 *frame_buffer; /* frame buffer data */ + struct framebuf *buffers; + struct framebuf * volatile curbuff; + struct framebuf *workbuff; + + /* MJPEG Extension */ + int APPn; /* Number of APP segment to be written, must be 0..15 */ + int APP_len; /* Length of data in JPEG APPn segment */ + char APP_data[60]; /* Data in the JPEG APPn segment. */ + + int COM_len; /* Length of data in JPEG COM segment */ + char COM_data[60]; /* Data in JPEG COM segment */ +}; + +/* v4l */ +int cpia2_register_camera(struct camera_data *cam); +void cpia2_unregister_camera(struct camera_data *cam); + +/* core */ +int cpia2_reset_camera(struct camera_data *cam); +int cpia2_set_low_power(struct camera_data *cam); +void cpia2_dbg_dump_registers(struct camera_data *cam); +int cpia2_match_video_size(int width, int height); +void cpia2_set_camera_state(struct camera_data *cam); +void cpia2_save_camera_state(struct camera_data *cam); +void cpia2_set_color_params(struct camera_data *cam); +void cpia2_set_brightness(struct camera_data *cam, unsigned char value); +void cpia2_set_contrast(struct camera_data *cam, unsigned char value); +void cpia2_set_saturation(struct camera_data *cam, unsigned char value); +int cpia2_set_flicker_mode(struct camera_data *cam, int mode); +void cpia2_set_format(struct camera_data *cam); +int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd); +int cpia2_do_command(struct camera_data *cam, + unsigned int command, + unsigned char direction, unsigned char param); +struct camera_data *cpia2_init_camera_struct(void); +int cpia2_init_camera(struct camera_data *cam); +int cpia2_allocate_buffers(struct camera_data *cam); +void cpia2_free_buffers(struct camera_data *cam); +long cpia2_read(struct camera_data *cam, + char *buf, unsigned long count, int noblock); +unsigned int cpia2_poll(struct camera_data *cam, + struct file *filp, poll_table *wait); +int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma); +void cpia2_set_property_flip(struct camera_data *cam, int prop_val); +void cpia2_set_property_mirror(struct camera_data *cam, int prop_val); +int cpia2_set_target_kb(struct camera_data *cam, unsigned char value); +int cpia2_set_gpio(struct camera_data *cam, unsigned char setting); +int cpia2_set_fps(struct camera_data *cam, int framerate); + +/* usb */ +int cpia2_usb_init(void); +void cpia2_usb_cleanup(void); +int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers, + u8 request, u8 start, u8 count, u8 direction); +int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate); +int cpia2_usb_stream_stop(struct camera_data *cam); +int cpia2_usb_stream_pause(struct camera_data *cam); +int cpia2_usb_stream_resume(struct camera_data *cam); +int cpia2_usb_change_streaming_alternate(struct camera_data *cam, + unsigned int alt); + + +/* ----------------------- debug functions ---------------------- */ +#ifdef _CPIA2_DEBUG_ +#define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args) +#define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args) +#define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args) +#define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args) +#else +#define ALOG(fmt,args...) printk(fmt,##args) +#define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args) +#define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args) +#define DBG(fmn,args...) do {} while(0) +#endif +/* No function or lineno, for shorter lines */ +#define KINFO(fmt, args...) printk(KERN_INFO fmt,##args) + +#endif diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c new file mode 100644 index 000000000000..fd771c7a2fe2 --- /dev/null +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -0,0 +1,2525 @@ +/**************************************************************************** + * + * Filename: cpia2_core.c + * + * Copyright 2001, STMicrolectronics, Inc. + * Contact: steve.miller@st.com + * + * Description: + * This is a USB driver for CPia2 based video cameras. + * The infrastructure of this driver is based on the cpia usb driver by + * Jochen Scharrlach and Johannes Erdfeldt. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Stripped of 2.4 stuff ready for main kernel submit by + * Alan Cox <alan@redhat.com> + * + ****************************************************************************/ + +#include "cpia2.h" + +#include <linux/slab.h> +#include <linux/vmalloc.h> + +//#define _CPIA2_DEBUG_ + +#include "cpia2patch.h" + +#ifdef _CPIA2_DEBUG_ + +static const char *block_name[] = { + "System", + "VC", + "VP", + "IDATA" +}; +#endif + +static unsigned int debugs_on = 0;//DEBUG_REG; + + +/****************************************************************************** + * + * Forward Declarations + * + *****************************************************************************/ +static int apply_vp_patch(struct camera_data *cam); +static int set_default_user_mode(struct camera_data *cam); +static int set_vw_size(struct camera_data *cam, int size); +static int configure_sensor(struct camera_data *cam, + int reqwidth, int reqheight); +static int config_sensor_410(struct camera_data *cam, + int reqwidth, int reqheight); +static int config_sensor_500(struct camera_data *cam, + int reqwidth, int reqheight); +static int set_all_properties(struct camera_data *cam); +static void get_color_params(struct camera_data *cam); +static void wake_system(struct camera_data *cam); +static void set_lowlight_boost(struct camera_data *cam); +static void reset_camera_struct(struct camera_data *cam); +static int cpia2_set_high_power(struct camera_data *cam); + +/* Here we want the physical address of the memory. + * This is used when initializing the contents of the + * area and marking the pages as reserved. + */ +static inline unsigned long kvirt_to_pa(unsigned long adr) +{ + unsigned long kva, ret; + + kva = (unsigned long) page_address(vmalloc_to_page((void *)adr)); + kva |= adr & (PAGE_SIZE-1); /* restore the offset */ + ret = __pa(kva); + return ret; +} + +static void *rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + /* Round it off to PAGE_SIZE */ + size = PAGE_ALIGN(size); + + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + + while ((long)size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + return mem; +} + +static void rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + size = PAGE_ALIGN(size); + + adr = (unsigned long) mem; + while ((long)size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + +/****************************************************************************** + * + * cpia2_do_command + * + * Send an arbitrary command to the camera. For commands that read from + * the camera, copy the buffers into the proper param structures. + *****************************************************************************/ +int cpia2_do_command(struct camera_data *cam, + u32 command, u8 direction, u8 param) +{ + int retval = 0; + struct cpia2_command cmd; + unsigned int device = cam->params.pnp_id.device_type; + + cmd.command = command; + cmd.reg_count = 2; /* default */ + cmd.direction = direction; + + /*** + * Set up the command. + ***/ + switch (command) { + case CPIA2_CMD_GET_VERSION: + cmd.req_mode = + CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.start = CPIA2_SYSTEM_DEVICE_HI; + break; + case CPIA2_CMD_GET_PNP_ID: + cmd.req_mode = + CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.reg_count = 8; + cmd.start = CPIA2_SYSTEM_DESCRIP_VID_HI; + break; + case CPIA2_CMD_GET_ASIC_TYPE: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.start = CPIA2_VC_ASIC_ID; + break; + case CPIA2_CMD_GET_SENSOR: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.start = CPIA2_VP_SENSOR_FLAGS; + break; + case CPIA2_CMD_GET_VP_DEVICE: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.start = CPIA2_VP_DEVICEH; + break; + case CPIA2_CMD_SET_VP_BRIGHTNESS: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VP_BRIGHTNESS: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + if (device == DEVICE_STV_672) + cmd.start = CPIA2_VP4_EXPOSURE_TARGET; + else + cmd.start = CPIA2_VP5_EXPOSURE_TARGET; + break; + case CPIA2_CMD_SET_CONTRAST: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_CONTRAST: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_YRANGE; + break; + case CPIA2_CMD_SET_VP_SATURATION: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VP_SATURATION: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + if (device == DEVICE_STV_672) + cmd.start = CPIA2_VP_SATURATION; + else + cmd.start = CPIA2_VP5_MCUVSATURATION; + break; + case CPIA2_CMD_SET_VP_GPIO_DATA: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VP_GPIO_DATA: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_GPIO_DATA; + break; + case CPIA2_CMD_SET_VP_GPIO_DIRECTION: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VP_GPIO_DIRECTION: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_GPIO_DIRECTION; + break; + case CPIA2_CMD_SET_VC_MP_GPIO_DATA: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VC_MP_GPIO_DATA: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.reg_count = 1; + cmd.start = CPIA2_VC_MP_DATA; + break; + case CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.reg_count = 1; + cmd.start = CPIA2_VC_MP_DIR; + break; + case CPIA2_CMD_ENABLE_PACKET_CTRL: + cmd.req_mode = + CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.start = CPIA2_SYSTEM_INT_PACKET_CTRL; + cmd.reg_count = 1; + cmd.buffer.block_data[0] = param; + break; + case CPIA2_CMD_SET_FLICKER_MODES: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_FLICKER_MODES: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_FLICKER_MODES; + break; + case CPIA2_CMD_RESET_FIFO: /* clear fifo and enable stream block */ + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; + cmd.reg_count = 2; + cmd.start = 0; + cmd.buffer.registers[0].index = CPIA2_VC_ST_CTRL; + cmd.buffer.registers[0].value = CPIA2_VC_ST_CTRL_SRC_VC | + CPIA2_VC_ST_CTRL_DST_USB | CPIA2_VC_ST_CTRL_EOF_DETECT; + cmd.buffer.registers[1].index = CPIA2_VC_ST_CTRL; + cmd.buffer.registers[1].value = CPIA2_VC_ST_CTRL_SRC_VC | + CPIA2_VC_ST_CTRL_DST_USB | + CPIA2_VC_ST_CTRL_EOF_DETECT | + CPIA2_VC_ST_CTRL_FIFO_ENABLE; + break; + case CPIA2_CMD_SET_HI_POWER: + cmd.req_mode = + CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_SYSTEM; + cmd.reg_count = 2; + cmd.buffer.registers[0].index = + CPIA2_SYSTEM_SYSTEM_CONTROL; + cmd.buffer.registers[1].index = + CPIA2_SYSTEM_SYSTEM_CONTROL; + cmd.buffer.registers[0].value = CPIA2_SYSTEM_CONTROL_CLEAR_ERR; + cmd.buffer.registers[1].value = + CPIA2_SYSTEM_CONTROL_HIGH_POWER; + break; + case CPIA2_CMD_SET_LOW_POWER: + cmd.req_mode = + CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.reg_count = 1; + cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL; + cmd.buffer.block_data[0] = 0; + break; + case CPIA2_CMD_CLEAR_V2W_ERR: + cmd.req_mode = + CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.reg_count = 1; + cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL; + cmd.buffer.block_data[0] = CPIA2_SYSTEM_CONTROL_CLEAR_ERR; + break; + case CPIA2_CMD_SET_USER_MODE: /* Then fall through */ + cmd.buffer.block_data[0] = param; + case CPIA2_CMD_GET_USER_MODE: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + if (device == DEVICE_STV_672) + cmd.start = CPIA2_VP4_USER_MODE; + else + cmd.start = CPIA2_VP5_USER_MODE; + break; + case CPIA2_CMD_FRAMERATE_REQ: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + if (device == DEVICE_STV_672) + cmd.start = CPIA2_VP4_FRAMERATE_REQUEST; + else + cmd.start = CPIA2_VP5_FRAMERATE_REQUEST; + cmd.buffer.block_data[0] = param; + break; + case CPIA2_CMD_SET_WAKEUP: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_WAKEUP: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.reg_count = 1; + cmd.start = CPIA2_VC_WAKEUP; + break; + case CPIA2_CMD_SET_PW_CONTROL: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_PW_CONTROL: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.reg_count = 1; + cmd.start = CPIA2_VC_PW_CTRL; + break; + case CPIA2_CMD_GET_VP_SYSTEM_STATE: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_SYSTEMSTATE; + break; + case CPIA2_CMD_SET_SYSTEM_CTRL: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_SYSTEM_CTRL: + cmd.req_mode = + CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.reg_count = 1; + cmd.start = CPIA2_SYSTEM_SYSTEM_CONTROL; + break; + case CPIA2_CMD_SET_VP_SYSTEM_CTRL: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VP_SYSTEM_CTRL: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_SYSTEMCTRL; + break; + case CPIA2_CMD_SET_VP_EXP_MODES: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VP_EXP_MODES: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_EXPOSURE_MODES; + break; + case CPIA2_CMD_SET_DEVICE_CONFIG: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_DEVICE_CONFIG: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_DEVICE_CONFIG; + break; + case CPIA2_CMD_SET_SERIAL_ADDR: + cmd.buffer.block_data[0] = param; + cmd.req_mode = + CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.reg_count = 1; + cmd.start = CPIA2_SYSTEM_VP_SERIAL_ADDR; + break; + case CPIA2_CMD_SET_SENSOR_CR1: + cmd.buffer.block_data[0] = param; + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_SENSOR_CR1; + break; + case CPIA2_CMD_SET_VC_CONTROL: + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_VC_CONTROL: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.reg_count = 1; + cmd.start = CPIA2_VC_VC_CTRL; + break; + case CPIA2_CMD_SET_TARGET_KB: + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; + cmd.reg_count = 1; + cmd.buffer.registers[0].index = CPIA2_VC_VC_TARGET_KB; + cmd.buffer.registers[0].value = param; + break; + case CPIA2_CMD_SET_DEF_JPEG_OPT: + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; + cmd.reg_count = 4; + cmd.buffer.registers[0].index = CPIA2_VC_VC_JPEG_OPT; + cmd.buffer.registers[0].value = + CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE; + cmd.buffer.registers[1].index = CPIA2_VC_VC_USER_SQUEEZE; + cmd.buffer.registers[1].value = 20; + cmd.buffer.registers[2].index = CPIA2_VC_VC_CREEP_PERIOD; + cmd.buffer.registers[2].value = 2; + cmd.buffer.registers[3].index = CPIA2_VC_VC_JPEG_OPT; + cmd.buffer.registers[3].value = CPIA2_VC_VC_JPEG_OPT_DEFAULT; + break; + case CPIA2_CMD_REHASH_VP4: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + cmd.start = CPIA2_VP_REHASH_VALUES; + cmd.buffer.block_data[0] = param; + break; + case CPIA2_CMD_SET_USER_EFFECTS: /* Note: Be careful with this as + this register can also affect + flicker modes */ + cmd.buffer.block_data[0] = param; /* Then fall through */ + case CPIA2_CMD_GET_USER_EFFECTS: + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 1; + if (device == DEVICE_STV_672) + cmd.start = CPIA2_VP4_USER_EFFECTS; + else + cmd.start = CPIA2_VP5_USER_EFFECTS; + break; + default: + LOG("DoCommand received invalid command\n"); + return -EINVAL; + } + + retval = cpia2_send_command(cam, &cmd); + if (retval) { + return retval; + } + + /*** + * Now copy any results from a read into the appropriate param struct. + ***/ + switch (command) { + case CPIA2_CMD_GET_VERSION: + cam->params.version.firmware_revision_hi = + cmd.buffer.block_data[0]; + cam->params.version.firmware_revision_lo = + cmd.buffer.block_data[1]; + break; + case CPIA2_CMD_GET_PNP_ID: + cam->params.pnp_id.vendor = (cmd.buffer.block_data[0] << 8) | + cmd.buffer.block_data[1]; + cam->params.pnp_id.product = (cmd.buffer.block_data[2] << 8) | + cmd.buffer.block_data[3]; + cam->params.pnp_id.device_revision = + (cmd.buffer.block_data[4] << 8) | + cmd.buffer.block_data[5]; + if (cam->params.pnp_id.vendor == 0x553) { + if (cam->params.pnp_id.product == 0x100) { + cam->params.pnp_id.device_type = DEVICE_STV_672; + } else if (cam->params.pnp_id.product == 0x140 || + cam->params.pnp_id.product == 0x151) { + cam->params.pnp_id.device_type = DEVICE_STV_676; + } + } + break; + case CPIA2_CMD_GET_ASIC_TYPE: + cam->params.version.asic_id = cmd.buffer.block_data[0]; + cam->params.version.asic_rev = cmd.buffer.block_data[1]; + break; + case CPIA2_CMD_GET_SENSOR: + cam->params.version.sensor_flags = cmd.buffer.block_data[0]; + cam->params.version.sensor_rev = cmd.buffer.block_data[1]; + break; + case CPIA2_CMD_GET_VP_DEVICE: + cam->params.version.vp_device_hi = cmd.buffer.block_data[0]; + cam->params.version.vp_device_lo = cmd.buffer.block_data[1]; + break; + case CPIA2_CMD_GET_VP_BRIGHTNESS: + cam->params.color_params.brightness = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_CONTRAST: + cam->params.color_params.contrast = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VP_SATURATION: + cam->params.color_params.saturation = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VP_GPIO_DATA: + cam->params.vp_params.gpio_data = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VP_GPIO_DIRECTION: + cam->params.vp_params.gpio_direction = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION: + cam->params.vc_params.vc_mp_direction =cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VC_MP_GPIO_DATA: + cam->params.vc_params.vc_mp_data = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_FLICKER_MODES: + cam->params.flicker_control.cam_register = + cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_WAKEUP: + cam->params.vc_params.wakeup = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_PW_CONTROL: + cam->params.vc_params.pw_control = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_SYSTEM_CTRL: + cam->params.camera_state.system_ctrl = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VP_SYSTEM_STATE: + cam->params.vp_params.system_state = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VP_SYSTEM_CTRL: + cam->params.vp_params.system_ctrl = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VP_EXP_MODES: + cam->params.vp_params.exposure_modes = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_DEVICE_CONFIG: + cam->params.vp_params.device_config = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_VC_CONTROL: + cam->params.vc_params.vc_control = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_USER_MODE: + cam->params.vp_params.video_mode = cmd.buffer.block_data[0]; + break; + case CPIA2_CMD_GET_USER_EFFECTS: + cam->params.vp_params.user_effects = cmd.buffer.block_data[0]; + break; + default: + break; + } + return retval; +} + +/****************************************************************************** + * + * cpia2_send_command + * + *****************************************************************************/ +int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd) +{ + u8 count; + u8 start; + u8 block_index; + u8 *buffer; + int retval; + const char* dir; + + if (cmd->direction == TRANSFER_WRITE) { + dir = "Write"; + } else { + dir = "Read"; + } + + block_index = cmd->req_mode & 0x03; + + switch (cmd->req_mode & 0x0c) { + case CAMERAACCESS_TYPE_RANDOM: + count = cmd->reg_count * sizeof(struct cpia2_register); + start = 0; + buffer = (u8 *) & cmd->buffer; + if (debugs_on & DEBUG_REG) + DBG("%s Random: Register block %s\n", dir, + block_name[block_index]); + break; + case CAMERAACCESS_TYPE_BLOCK: + count = cmd->reg_count; + start = cmd->start; + buffer = cmd->buffer.block_data; + if (debugs_on & DEBUG_REG) + DBG("%s Block: Register block %s\n", dir, + block_name[block_index]); + break; + case CAMERAACCESS_TYPE_MASK: + count = cmd->reg_count * sizeof(struct cpia2_reg_mask); + start = 0; + buffer = (u8 *) & cmd->buffer; + if (debugs_on & DEBUG_REG) + DBG("%s Mask: Register block %s\n", dir, + block_name[block_index]); + break; + case CAMERAACCESS_TYPE_REPEAT: /* For patch blocks only */ + count = cmd->reg_count; + start = cmd->start; + buffer = cmd->buffer.block_data; + if (debugs_on & DEBUG_REG) + DBG("%s Repeat: Register block %s\n", dir, + block_name[block_index]); + break; + default: + LOG("%s: invalid request mode\n",__FUNCTION__); + return -EINVAL; + } + + retval = cpia2_usb_transfer_cmd(cam, + buffer, + cmd->req_mode, + start, count, cmd->direction); +#ifdef _CPIA2_DEBUG_ + if (debugs_on & DEBUG_REG) { + int i; + for (i = 0; i < cmd->reg_count; i++) { + if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_BLOCK) + KINFO("%s Block: [0x%02X] = 0x%02X\n", + dir, start + i, buffer[i]); + if((cmd->req_mode & 0x0c) == CAMERAACCESS_TYPE_RANDOM) + KINFO("%s Random: [0x%02X] = 0x%02X\n", + dir, cmd->buffer.registers[i].index, + cmd->buffer.registers[i].value); + } + } +#endif + + return retval; +}; + +/************* + * Functions to implement camera functionality + *************/ +/****************************************************************************** + * + * cpia2_get_version_info + * + *****************************************************************************/ +static void cpia2_get_version_info(struct camera_data *cam) +{ + cpia2_do_command(cam, CPIA2_CMD_GET_VERSION, TRANSFER_READ, 0); + cpia2_do_command(cam, CPIA2_CMD_GET_PNP_ID, TRANSFER_READ, 0); + cpia2_do_command(cam, CPIA2_CMD_GET_ASIC_TYPE, TRANSFER_READ, 0); + cpia2_do_command(cam, CPIA2_CMD_GET_SENSOR, TRANSFER_READ, 0); + cpia2_do_command(cam, CPIA2_CMD_GET_VP_DEVICE, TRANSFER_READ, 0); +} + +/****************************************************************************** + * + * cpia2_reset_camera + * + * Called at least during the open process, sets up initial params. + *****************************************************************************/ +int cpia2_reset_camera(struct camera_data *cam) +{ + u8 tmp_reg; + int retval = 0; + int i; + struct cpia2_command cmd; + + /*** + * VC setup + ***/ + retval = configure_sensor(cam, + cam->params.roi.width, + cam->params.roi.height); + if (retval < 0) { + ERR("Couldn't configure sensor, error=%d\n", retval); + return retval; + } + + /* Clear FIFO and route/enable stream block */ + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; + cmd.direction = TRANSFER_WRITE; + cmd.reg_count = 2; + cmd.buffer.registers[0].index = CPIA2_VC_ST_CTRL; + cmd.buffer.registers[0].value = CPIA2_VC_ST_CTRL_SRC_VC | + CPIA2_VC_ST_CTRL_DST_USB | CPIA2_VC_ST_CTRL_EOF_DETECT; + cmd.buffer.registers[1].index = CPIA2_VC_ST_CTRL; + cmd.buffer.registers[1].value = CPIA2_VC_ST_CTRL_SRC_VC | + CPIA2_VC_ST_CTRL_DST_USB | + CPIA2_VC_ST_CTRL_EOF_DETECT | CPIA2_VC_ST_CTRL_FIFO_ENABLE; + + cpia2_send_command(cam, &cmd); + + cpia2_set_high_power(cam); + + if (cam->params.pnp_id.device_type == DEVICE_STV_672) { + /* Enable button notification */ + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_SYSTEM; + cmd.buffer.registers[0].index = CPIA2_SYSTEM_INT_PACKET_CTRL; + cmd.buffer.registers[0].value = + CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX; + cmd.reg_count = 1; + cpia2_send_command(cam, &cmd); + } + + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(100 * HZ / 1000); /* wait for 100 msecs */ + + if (cam->params.pnp_id.device_type == DEVICE_STV_672) + retval = apply_vp_patch(cam); + + /* wait for vp to go to sleep */ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(100 * HZ / 1000); /* wait for 100 msecs */ + + /*** + * If this is a 676, apply VP5 fixes before we start streaming + ***/ + if (cam->params.pnp_id.device_type == DEVICE_STV_676) { + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP; + + /* The following writes improve the picture */ + cmd.buffer.registers[0].index = CPIA2_VP5_MYBLACK_LEVEL; + cmd.buffer.registers[0].value = 0; /* reduce from the default + * rec 601 pedestal of 16 */ + cmd.buffer.registers[1].index = CPIA2_VP5_MCYRANGE; + cmd.buffer.registers[1].value = 0x92; /* increase from 100% to + * (256/256 - 31) to fill + * available range */ + cmd.buffer.registers[2].index = CPIA2_VP5_MYCEILING; + cmd.buffer.registers[2].value = 0xFF; /* Increase from the + * default rec 601 ceiling + * of 240 */ + cmd.buffer.registers[3].index = CPIA2_VP5_MCUVSATURATION; + cmd.buffer.registers[3].value = 0xFF; /* Increase from the rec + * 601 100% level (128) + * to 145-192 */ + cmd.buffer.registers[4].index = CPIA2_VP5_ANTIFLKRSETUP; + cmd.buffer.registers[4].value = 0x80; /* Inhibit the + * anti-flicker */ + + /* The following 4 writes are a fix to allow QVGA to work at 30 fps */ + cmd.buffer.registers[5].index = CPIA2_VP_RAM_ADDR_H; + cmd.buffer.registers[5].value = 0x01; + cmd.buffer.registers[6].index = CPIA2_VP_RAM_ADDR_L; + cmd.buffer.registers[6].value = 0xE3; + cmd.buffer.registers[7].index = CPIA2_VP_RAM_DATA; + cmd.buffer.registers[7].value = 0x02; + cmd.buffer.registers[8].index = CPIA2_VP_RAM_DATA; + cmd.buffer.registers[8].value = 0xFC; + + cmd.direction = TRANSFER_WRITE; + cmd.reg_count = 9; + + cpia2_send_command(cam, &cmd); + } + + /* Activate all settings and start the data stream */ + /* Set user mode */ + set_default_user_mode(cam); + + /* Give VP time to wake up */ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(100 * HZ / 1000); /* wait for 100 msecs */ + + set_all_properties(cam); + + cpia2_do_command(cam, CPIA2_CMD_GET_USER_MODE, TRANSFER_READ, 0); + DBG("After SetAllProperties(cam), user mode is 0x%0X\n", + cam->params.vp_params.video_mode); + + /*** + * Set audio regulator off. This and the code to set the compresison + * state are too complex to form a CPIA2_CMD_, and seem to be somewhat + * intertwined. This stuff came straight from the windows driver. + ***/ + /* Turn AutoExposure off in VP and enable the serial bridge to the sensor */ + cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_CTRL, TRANSFER_READ, 0); + tmp_reg = cam->params.vp_params.system_ctrl; + cmd.buffer.registers[0].value = tmp_reg & + (tmp_reg & (CPIA2_VP_SYSTEMCTRL_HK_CONTROL ^ 0xFF)); + + cpia2_do_command(cam, CPIA2_CMD_GET_DEVICE_CONFIG, TRANSFER_READ, 0); + cmd.buffer.registers[1].value = cam->params.vp_params.device_config | + CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE; + cmd.buffer.registers[0].index = CPIA2_VP_SYSTEMCTRL; + cmd.buffer.registers[1].index = CPIA2_VP_DEVICE_CONFIG; + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP; + cmd.reg_count = 2; + cmd.direction = TRANSFER_WRITE; + cmd.start = 0; + cpia2_send_command(cam, &cmd); + + /* Set the correct I2C address in the CPiA-2 system register */ + cpia2_do_command(cam, + CPIA2_CMD_SET_SERIAL_ADDR, + TRANSFER_WRITE, + CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR); + + /* Now have sensor access - set bit to turn the audio regulator off */ + cpia2_do_command(cam, + CPIA2_CMD_SET_SENSOR_CR1, + TRANSFER_WRITE, CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR); + + /* Set the correct I2C address in the CPiA-2 system register */ + if (cam->params.pnp_id.device_type == DEVICE_STV_672) + cpia2_do_command(cam, + CPIA2_CMD_SET_SERIAL_ADDR, + TRANSFER_WRITE, + CPIA2_SYSTEM_VP_SERIAL_ADDR_VP); // 0x88 + else + cpia2_do_command(cam, + CPIA2_CMD_SET_SERIAL_ADDR, + TRANSFER_WRITE, + CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP); // 0x8a + + /* increase signal drive strength */ + if (cam->params.pnp_id.device_type == DEVICE_STV_676) + cpia2_do_command(cam, + CPIA2_CMD_SET_VP_EXP_MODES, + TRANSFER_WRITE, + CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP); + + /* Start autoexposure */ + cpia2_do_command(cam, CPIA2_CMD_GET_DEVICE_CONFIG, TRANSFER_READ, 0); + cmd.buffer.registers[0].value = cam->params.vp_params.device_config & + (CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE ^ 0xFF); + + cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_CTRL, TRANSFER_READ, 0); + cmd.buffer.registers[1].value = + cam->params.vp_params.system_ctrl | CPIA2_VP_SYSTEMCTRL_HK_CONTROL; + + cmd.buffer.registers[0].index = CPIA2_VP_DEVICE_CONFIG; + cmd.buffer.registers[1].index = CPIA2_VP_SYSTEMCTRL; + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VP; + cmd.reg_count = 2; + cmd.direction = TRANSFER_WRITE; + + cpia2_send_command(cam, &cmd); + + /* Set compression state */ + cpia2_do_command(cam, CPIA2_CMD_GET_VC_CONTROL, TRANSFER_READ, 0); + if (cam->params.compression.inhibit_htables) { + tmp_reg = cam->params.vc_params.vc_control | + CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES; + } else { + tmp_reg = cam->params.vc_params.vc_control & + ~CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES; + } + cpia2_do_command(cam, CPIA2_CMD_SET_VC_CONTROL, TRANSFER_WRITE,tmp_reg); + + /* Set target size (kb) on vc */ + cpia2_do_command(cam, CPIA2_CMD_SET_TARGET_KB, + TRANSFER_WRITE, cam->params.vc_params.target_kb); + + /* Wiggle VC Reset */ + /*** + * First read and wait a bit. + ***/ + for (i = 0; i < 50; i++) { + cpia2_do_command(cam, CPIA2_CMD_GET_PW_CONTROL, + TRANSFER_READ, 0); + } + + tmp_reg = cam->params.vc_params.pw_control; + tmp_reg &= ~CPIA2_VC_PW_CTRL_VC_RESET_N; + + cpia2_do_command(cam, CPIA2_CMD_SET_PW_CONTROL, TRANSFER_WRITE,tmp_reg); + + tmp_reg |= CPIA2_VC_PW_CTRL_VC_RESET_N; + cpia2_do_command(cam, CPIA2_CMD_SET_PW_CONTROL, TRANSFER_WRITE,tmp_reg); + + cpia2_do_command(cam, CPIA2_CMD_SET_DEF_JPEG_OPT, TRANSFER_WRITE, 0); + + cpia2_do_command(cam, CPIA2_CMD_GET_USER_MODE, TRANSFER_READ, 0); + DBG("After VC RESET, user mode is 0x%0X\n", + cam->params.vp_params.video_mode); + + return retval; +} + +/****************************************************************************** + * + * cpia2_set_high_power + * + *****************************************************************************/ +static int cpia2_set_high_power(struct camera_data *cam) +{ + int i; + for (i = 0; i <= 50; i++) { + /* Read system status */ + cpia2_do_command(cam,CPIA2_CMD_GET_SYSTEM_CTRL,TRANSFER_READ,0); + + /* If there is an error, clear it */ + if(cam->params.camera_state.system_ctrl & + CPIA2_SYSTEM_CONTROL_V2W_ERR) + cpia2_do_command(cam, CPIA2_CMD_CLEAR_V2W_ERR, + TRANSFER_WRITE, 0); + + /* Try to set high power mode */ + cpia2_do_command(cam, CPIA2_CMD_SET_SYSTEM_CTRL, + TRANSFER_WRITE, 1); + + /* Try to read something in VP to check if everything is awake */ + cpia2_do_command(cam, CPIA2_CMD_GET_VP_SYSTEM_STATE, + TRANSFER_READ, 0); + if (cam->params.vp_params.system_state & + CPIA2_VP_SYSTEMSTATE_HK_ALIVE) { + break; + } else if (i == 50) { + cam->params.camera_state.power_mode = LO_POWER_MODE; + ERR("Camera did not wake up\n"); + return -EIO; + } + } + + DBG("System now in high power state\n"); + cam->params.camera_state.power_mode = HI_POWER_MODE; + return 0; +} + +/****************************************************************************** + * + * cpia2_set_low_power + * + *****************************************************************************/ +int cpia2_set_low_power(struct camera_data *cam) +{ + cam->params.camera_state.power_mode = LO_POWER_MODE; + cpia2_do_command(cam, CPIA2_CMD_SET_SYSTEM_CTRL, TRANSFER_WRITE, 0); + return 0; +} + +/****************************************************************************** + * + * apply_vp_patch + * + *****************************************************************************/ +static int apply_vp_patch(struct camera_data *cam) +{ + int i, j; + struct cpia2_command cmd; + + cmd.req_mode = CAMERAACCESS_TYPE_REPEAT | CAMERAACCESS_VP; + cmd.direction = TRANSFER_WRITE; + + for (i = 0; i < PATCH_DATA_SIZE; i++) { + for (j = 0; j < patch_data[i].count; j++) { + cmd.buffer.block_data[j] = patch_data[i].data[j]; + } + + cmd.start = patch_data[i].reg; + cmd.reg_count = patch_data[i].count; + cpia2_send_command(cam, &cmd); + } + + return 0; +} + +/****************************************************************************** + * + * set_default_user_mode + * + *****************************************************************************/ +static int set_default_user_mode(struct camera_data *cam) +{ + unsigned char user_mode; + unsigned char frame_rate; + int width = cam->params.roi.width; + int height = cam->params.roi.height; + + switch (cam->params.version.sensor_flags) { + case CPIA2_VP_SENSOR_FLAGS_404: + case CPIA2_VP_SENSOR_FLAGS_407: + case CPIA2_VP_SENSOR_FLAGS_409: + case CPIA2_VP_SENSOR_FLAGS_410: + if ((width > STV_IMAGE_QCIF_COLS) + || (height > STV_IMAGE_QCIF_ROWS)) { + user_mode = CPIA2_VP_USER_MODE_CIF; + } else { + user_mode = CPIA2_VP_USER_MODE_QCIFDS; + } + frame_rate = CPIA2_VP_FRAMERATE_30; + break; + case CPIA2_VP_SENSOR_FLAGS_500: + if ((width > STV_IMAGE_CIF_COLS) + || (height > STV_IMAGE_CIF_ROWS)) { + user_mode = CPIA2_VP_USER_MODE_VGA; + } else { + user_mode = CPIA2_VP_USER_MODE_QVGADS; + } + if (cam->params.pnp_id.device_type == DEVICE_STV_672) + frame_rate = CPIA2_VP_FRAMERATE_15; + else + frame_rate = CPIA2_VP_FRAMERATE_30; + break; + default: + LOG("%s: Invalid sensor flag value 0x%0X\n",__FUNCTION__, + cam->params.version.sensor_flags); + return -EINVAL; + } + + DBG("Sensor flag = 0x%0x, user mode = 0x%0x, frame rate = 0x%X\n", + cam->params.version.sensor_flags, user_mode, frame_rate); + cpia2_do_command(cam, CPIA2_CMD_SET_USER_MODE, TRANSFER_WRITE, + user_mode); + if(cam->params.vp_params.frame_rate > 0 && + frame_rate > cam->params.vp_params.frame_rate) + frame_rate = cam->params.vp_params.frame_rate; + + cpia2_set_fps(cam, frame_rate); + +// if (cam->params.pnp_id.device_type == DEVICE_STV_676) +// cpia2_do_command(cam, +// CPIA2_CMD_SET_VP_SYSTEM_CTRL, +// TRANSFER_WRITE, +// CPIA2_VP_SYSTEMCTRL_HK_CONTROL | +// CPIA2_VP_SYSTEMCTRL_POWER_CONTROL); + + return 0; +} + +/****************************************************************************** + * + * cpia2_match_video_size + * + * return the best match, where 'best' is as always + * the largest that is not bigger than what is requested. + *****************************************************************************/ +int cpia2_match_video_size(int width, int height) +{ + if (width >= STV_IMAGE_VGA_COLS && height >= STV_IMAGE_VGA_ROWS) + return VIDEOSIZE_VGA; + + if (width >= STV_IMAGE_CIF_COLS && height >= STV_IMAGE_CIF_ROWS) + return VIDEOSIZE_CIF; + + if (width >= STV_IMAGE_QVGA_COLS && height >= STV_IMAGE_QVGA_ROWS) + return VIDEOSIZE_QVGA; + + if (width >= 288 && height >= 216) + return VIDEOSIZE_288_216; + + if (width >= 256 && height >= 192) + return VIDEOSIZE_256_192; + + if (width >= 224 && height >= 168) + return VIDEOSIZE_224_168; + + if (width >= 192 && height >= 144) + return VIDEOSIZE_192_144; + + if (width >= STV_IMAGE_QCIF_COLS && height >= STV_IMAGE_QCIF_ROWS) + return VIDEOSIZE_QCIF; + + return -1; +} + +/****************************************************************************** + * + * SetVideoSize + * + *****************************************************************************/ +static int set_vw_size(struct camera_data *cam, int size) +{ + int retval = 0; + + cam->params.vp_params.video_size = size; + + switch (size) { + case VIDEOSIZE_VGA: + DBG("Setting size to VGA\n"); + cam->params.roi.width = STV_IMAGE_VGA_COLS; + cam->params.roi.height = STV_IMAGE_VGA_ROWS; + cam->vw.width = STV_IMAGE_VGA_COLS; + cam->vw.height = STV_IMAGE_VGA_ROWS; + break; + case VIDEOSIZE_CIF: + DBG("Setting size to CIF\n"); + cam->params.roi.width = STV_IMAGE_CIF_COLS; + cam->params.roi.height = STV_IMAGE_CIF_ROWS; + cam->vw.width = STV_IMAGE_CIF_COLS; + cam->vw.height = STV_IMAGE_CIF_ROWS; + break; + case VIDEOSIZE_QVGA: + DBG("Setting size to QVGA\n"); + cam->params.roi.width = STV_IMAGE_QVGA_COLS; + cam->params.roi.height = STV_IMAGE_QVGA_ROWS; + cam->vw.width = STV_IMAGE_QVGA_COLS; + cam->vw.height = STV_IMAGE_QVGA_ROWS; + break; + case VIDEOSIZE_288_216: + cam->params.roi.width = 288; + cam->params.roi.height = 216; + cam->vw.width = 288; + cam->vw.height = 216; + break; + case VIDEOSIZE_256_192: + cam->vw.width = 256; + cam->vw.height = 192; + cam->params.roi.width = 256; + cam->params.roi.height = 192; + break; + case VIDEOSIZE_224_168: + cam->vw.width = 224; + cam->vw.height = 168; + cam->params.roi.width = 224; + cam->params.roi.height = 168; + break; + case VIDEOSIZE_192_144: + cam->vw.width = 192; + cam->vw.height = 144; + cam->params.roi.width = 192; + cam->params.roi.height = 144; + break; + case VIDEOSIZE_QCIF: + DBG("Setting size to QCIF\n"); + cam->params.roi.width = STV_IMAGE_QCIF_COLS; + cam->params.roi.height = STV_IMAGE_QCIF_ROWS; + cam->vw.width = STV_IMAGE_QCIF_COLS; + cam->vw.height = STV_IMAGE_QCIF_ROWS; + break; + default: + retval = -EINVAL; + } + return retval; +} + +/****************************************************************************** + * + * configure_sensor + * + *****************************************************************************/ +static int configure_sensor(struct camera_data *cam, + int req_width, int req_height) +{ + int retval; + + switch (cam->params.version.sensor_flags) { + case CPIA2_VP_SENSOR_FLAGS_404: + case CPIA2_VP_SENSOR_FLAGS_407: + case CPIA2_VP_SENSOR_FLAGS_409: + case CPIA2_VP_SENSOR_FLAGS_410: + retval = config_sensor_410(cam, req_width, req_height); + break; + case CPIA2_VP_SENSOR_FLAGS_500: + retval = config_sensor_500(cam, req_width, req_height); + break; + default: + return -EINVAL; + } + + return retval; +} + +/****************************************************************************** + * + * config_sensor_410 + * + *****************************************************************************/ +static int config_sensor_410(struct camera_data *cam, + int req_width, int req_height) +{ + struct cpia2_command cmd; + int i = 0; + int image_size; + int image_type; + int width = req_width; + int height = req_height; + + /*** + * Make sure size doesn't exceed CIF. + ***/ + if (width > STV_IMAGE_CIF_COLS) + width = STV_IMAGE_CIF_COLS; + if (height > STV_IMAGE_CIF_ROWS) + height = STV_IMAGE_CIF_ROWS; + + image_size = cpia2_match_video_size(width, height); + + DBG("Config 410: width = %d, height = %d\n", width, height); + DBG("Image size returned is %d\n", image_size); + if (image_size >= 0) { + set_vw_size(cam, image_size); + width = cam->params.roi.width; + height = cam->params.roi.height; + + DBG("After set_vw_size(), width = %d, height = %d\n", + width, height); + if (width <= 176 && height <= 144) { + DBG("image type = VIDEOSIZE_QCIF\n"); + image_type = VIDEOSIZE_QCIF; + } + else if (width <= 320 && height <= 240) { + DBG("image type = VIDEOSIZE_QVGA\n"); + image_type = VIDEOSIZE_QVGA; + } + else { + DBG("image type = VIDEOSIZE_CIF\n"); + image_type = VIDEOSIZE_CIF; + } + } else { + ERR("ConfigSensor410 failed\n"); + return -EINVAL; + } + + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; + cmd.direction = TRANSFER_WRITE; + + /* VC Format */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_FORMAT; + if (image_type == VIDEOSIZE_CIF) { + cmd.buffer.registers[i++].value = + (u8) (CPIA2_VC_VC_FORMAT_UFIRST | + CPIA2_VC_VC_FORMAT_SHORTLINE); + } else { + cmd.buffer.registers[i++].value = + (u8) CPIA2_VC_VC_FORMAT_UFIRST; + } + + /* VC Clocks */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_CLOCKS; + if (image_type == VIDEOSIZE_QCIF) { + if (cam->params.pnp_id.device_type == DEVICE_STV_672) { + cmd.buffer.registers[i++].value= + (u8)(CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 | + CPIA2_VC_VC_672_CLOCKS_SCALING | + CPIA2_VC_VC_CLOCKS_LOGDIV2); + DBG("VC_Clocks (0xc4) should be B\n"); + } + else { + cmd.buffer.registers[i++].value= + (u8)(CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 | + CPIA2_VC_VC_CLOCKS_LOGDIV2); + } + } else { + if (cam->params.pnp_id.device_type == DEVICE_STV_672) { + cmd.buffer.registers[i++].value = + (u8) (CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 | + CPIA2_VC_VC_CLOCKS_LOGDIV0); + } + else { + cmd.buffer.registers[i++].value = + (u8) (CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 | + CPIA2_VC_VC_676_CLOCKS_SCALING | + CPIA2_VC_VC_CLOCKS_LOGDIV0); + } + } + DBG("VC_Clocks (0xc4) = 0x%0X\n", cmd.buffer.registers[i-1].value); + + /* Input reqWidth from VC */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_IHSIZE_LO; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = + (u8) (STV_IMAGE_QCIF_COLS / 4); + else + cmd.buffer.registers[i++].value = + (u8) (STV_IMAGE_CIF_COLS / 4); + + /* Timings */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_HI; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 0; + else + cmd.buffer.registers[i++].value = (u8) 1; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_LO; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 208; + else + cmd.buffer.registers[i++].value = (u8) 160; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_HI; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 0; + else + cmd.buffer.registers[i++].value = (u8) 1; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_LO; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 160; + else + cmd.buffer.registers[i++].value = (u8) 64; + + /* Output Image Size */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_OHSIZE; + cmd.buffer.registers[i++].value = cam->params.roi.width / 4; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_OVSIZE; + cmd.buffer.registers[i++].value = cam->params.roi.height / 4; + + /* Cropping */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_HCROP; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_QCIF_COLS / 4) - (width / 4)) / 2); + else + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_CIF_COLS / 4) - (width / 4)) / 2); + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VCROP; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_QCIF_ROWS / 4) - (height / 4)) / 2); + else + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_CIF_ROWS / 4) - (height / 4)) / 2); + + /* Scaling registers (defaults) */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_HPHASE; + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VPHASE; + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_HISPAN; + cmd.buffer.registers[i++].value = (u8) 31; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VISPAN; + cmd.buffer.registers[i++].value = (u8) 31; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_HICROP; + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VICROP; + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_HFRACT; + cmd.buffer.registers[i++].value = (u8) 0x81; /* = 8/1 = 8 (HIBYTE/LOBYTE) */ + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VFRACT; + cmd.buffer.registers[i++].value = (u8) 0x81; /* = 8/1 = 8 (HIBYTE/LOBYTE) */ + + cmd.reg_count = i; + + cpia2_send_command(cam, &cmd); + + return i; +} + + +/****************************************************************************** + * + * config_sensor_500(cam) + * + *****************************************************************************/ +static int config_sensor_500(struct camera_data *cam, + int req_width, int req_height) +{ + struct cpia2_command cmd; + int i = 0; + int image_size = VIDEOSIZE_CIF; + int image_type = VIDEOSIZE_VGA; + int width = req_width; + int height = req_height; + unsigned int device = cam->params.pnp_id.device_type; + + image_size = cpia2_match_video_size(width, height); + + if (width > STV_IMAGE_CIF_COLS || height > STV_IMAGE_CIF_ROWS) + image_type = VIDEOSIZE_VGA; + else if (width > STV_IMAGE_QVGA_COLS || height > STV_IMAGE_QVGA_ROWS) + image_type = VIDEOSIZE_CIF; + else if (width > STV_IMAGE_QCIF_COLS || height > STV_IMAGE_QCIF_ROWS) + image_type = VIDEOSIZE_QVGA; + else + image_type = VIDEOSIZE_QCIF; + + if (image_size >= 0) { + set_vw_size(cam, image_size); + width = cam->params.roi.width; + height = cam->params.roi.height; + } else { + ERR("ConfigSensor500 failed\n"); + return -EINVAL; + } + + DBG("image_size = %d, width = %d, height = %d, type = %d\n", + image_size, width, height, image_type); + + cmd.req_mode = CAMERAACCESS_TYPE_RANDOM | CAMERAACCESS_VC; + cmd.direction = TRANSFER_WRITE; + i = 0; + + /* VC Format */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_FORMAT; + cmd.buffer.registers[i].value = (u8) CPIA2_VC_VC_FORMAT_UFIRST; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i].value |= (u8) CPIA2_VC_VC_FORMAT_DECIMATING; + i++; + + /* VC Clocks */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_CLOCKS; + if (device == DEVICE_STV_672) { + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i].value = + (u8)CPIA2_VC_VC_CLOCKS_LOGDIV1; + else + cmd.buffer.registers[i].value = + (u8)(CPIA2_VC_VC_672_CLOCKS_SCALING | + CPIA2_VC_VC_CLOCKS_LOGDIV3); + } else { + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i].value = + (u8)CPIA2_VC_VC_CLOCKS_LOGDIV0; + else + cmd.buffer.registers[i].value = + (u8)(CPIA2_VC_VC_676_CLOCKS_SCALING | + CPIA2_VC_VC_CLOCKS_LOGDIV2); + } + i++; + + DBG("VC_CLOCKS = 0x%X\n", cmd.buffer.registers[i-1].value); + + /* Input width from VP */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_IHSIZE_LO; + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i].value = + (u8) (STV_IMAGE_VGA_COLS / 4); + else + cmd.buffer.registers[i].value = + (u8) (STV_IMAGE_QVGA_COLS / 4); + i++; + DBG("Input width = %d\n", cmd.buffer.registers[i-1].value); + + /* Timings */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_HI; + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i++].value = (u8) 2; + else + cmd.buffer.registers[i++].value = (u8) 1; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_XLIM_LO; + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i++].value = (u8) 250; + else if (image_type == VIDEOSIZE_QVGA) + cmd.buffer.registers[i++].value = (u8) 125; + else + cmd.buffer.registers[i++].value = (u8) 160; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_HI; + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i++].value = (u8) 2; + else + cmd.buffer.registers[i++].value = (u8) 1; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_YLIM_LO; + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i++].value = (u8) 12; + else if (image_type == VIDEOSIZE_QVGA) + cmd.buffer.registers[i++].value = (u8) 64; + else + cmd.buffer.registers[i++].value = (u8) 6; + + /* Output Image Size */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_OHSIZE; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = STV_IMAGE_CIF_COLS / 4; + else + cmd.buffer.registers[i++].value = width / 4; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_OVSIZE; + if (image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = STV_IMAGE_CIF_ROWS / 4; + else + cmd.buffer.registers[i++].value = height / 4; + + /* Cropping */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_HCROP; + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_VGA_COLS / 4) - (width / 4)) / 2); + else if (image_type == VIDEOSIZE_QVGA) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_QVGA_COLS / 4) - (width / 4)) / 2); + else if (image_type == VIDEOSIZE_CIF) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_CIF_COLS / 4) - (width / 4)) / 2); + else /*if (image_type == VIDEOSIZE_QCIF)*/ + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_QCIF_COLS / 4) - (width / 4)) / 2); + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VCROP; + if (image_type == VIDEOSIZE_VGA) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_VGA_ROWS / 4) - (height / 4)) / 2); + else if (image_type == VIDEOSIZE_QVGA) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_QVGA_ROWS / 4) - (height / 4)) / 2); + else if (image_type == VIDEOSIZE_CIF) + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_CIF_ROWS / 4) - (height / 4)) / 2); + else /*if (image_type == VIDEOSIZE_QCIF)*/ + cmd.buffer.registers[i++].value = + (u8) (((STV_IMAGE_QCIF_ROWS / 4) - (height / 4)) / 2); + + /* Scaling registers (defaults) */ + cmd.buffer.registers[i].index = CPIA2_VC_VC_HPHASE; + if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 36; + else + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VPHASE; + if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 32; + else + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_HISPAN; + if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 26; + else + cmd.buffer.registers[i++].value = (u8) 31; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VISPAN; + if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 21; + else + cmd.buffer.registers[i++].value = (u8) 31; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_HICROP; + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VICROP; + cmd.buffer.registers[i++].value = (u8) 0; + + cmd.buffer.registers[i].index = CPIA2_VC_VC_HFRACT; + if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 0x2B; /* 2/11 */ + else + cmd.buffer.registers[i++].value = (u8) 0x81; /* 8/1 */ + + cmd.buffer.registers[i].index = CPIA2_VC_VC_VFRACT; + if (image_type == VIDEOSIZE_CIF || image_type == VIDEOSIZE_QCIF) + cmd.buffer.registers[i++].value = (u8) 0x13; /* 1/3 */ + else + cmd.buffer.registers[i++].value = (u8) 0x81; /* 8/1 */ + + cmd.reg_count = i; + + cpia2_send_command(cam, &cmd); + + return i; +} + + +/****************************************************************************** + * + * setallproperties + * + * This sets all user changeable properties to the values in cam->params. + *****************************************************************************/ +int set_all_properties(struct camera_data *cam) +{ + /** + * Don't set target_kb here, it will be set later. + * framerate and user_mode were already set (set_default_user_mode). + **/ + + cpia2_set_color_params(cam); + + cpia2_usb_change_streaming_alternate(cam, + cam->params.camera_state.stream_mode); + + cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE, + cam->params.vp_params.user_effects); + + cpia2_set_flicker_mode(cam, + cam->params.flicker_control.flicker_mode_req); + + cpia2_do_command(cam, + CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, + TRANSFER_WRITE, cam->params.vp_params.gpio_direction); + cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DATA, TRANSFER_WRITE, + cam->params.vp_params.gpio_data); + + wake_system(cam); + + set_lowlight_boost(cam); + + return 0; +} + +/****************************************************************************** + * + * cpia2_save_camera_state + * + *****************************************************************************/ +void cpia2_save_camera_state(struct camera_data *cam) +{ + get_color_params(cam); + cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0); + cpia2_do_command(cam, CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION, TRANSFER_READ, + 0); + cpia2_do_command(cam, CPIA2_CMD_GET_VC_MP_GPIO_DATA, TRANSFER_READ, 0); + /* Don't get framerate or target_kb. Trust the values we already have */ +} + +/****************************************************************************** + * + * get_color_params + * + *****************************************************************************/ +void get_color_params(struct camera_data *cam) +{ + cpia2_do_command(cam, CPIA2_CMD_GET_VP_BRIGHTNESS, TRANSFER_READ, 0); + cpia2_do_command(cam, CPIA2_CMD_GET_VP_SATURATION, TRANSFER_READ, 0); + cpia2_do_command(cam, CPIA2_CMD_GET_CONTRAST, TRANSFER_READ, 0); +} + +/****************************************************************************** + * + * cpia2_set_color_params + * + *****************************************************************************/ +void cpia2_set_color_params(struct camera_data *cam) +{ + DBG("Setting color params\n"); + cpia2_set_brightness(cam, cam->params.color_params.brightness); + cpia2_set_contrast(cam, cam->params.color_params.contrast); + cpia2_set_saturation(cam, cam->params.color_params.saturation); +} + +/****************************************************************************** + * + * cpia2_set_flicker_mode + * + *****************************************************************************/ +int cpia2_set_flicker_mode(struct camera_data *cam, int mode) +{ + unsigned char cam_reg; + int err = 0; + + if(cam->params.pnp_id.device_type != DEVICE_STV_672) + return -EINVAL; + + /* Set the appropriate bits in FLICKER_MODES, preserving the rest */ + if((err = cpia2_do_command(cam, CPIA2_CMD_GET_FLICKER_MODES, + TRANSFER_READ, 0))) + return err; + cam_reg = cam->params.flicker_control.cam_register; + + switch(mode) { + case NEVER_FLICKER: + cam_reg |= CPIA2_VP_FLICKER_MODES_NEVER_FLICKER; + cam_reg &= ~CPIA2_VP_FLICKER_MODES_50HZ; + break; + case FLICKER_60: + cam_reg &= ~CPIA2_VP_FLICKER_MODES_NEVER_FLICKER; + cam_reg &= ~CPIA2_VP_FLICKER_MODES_50HZ; + break; + case FLICKER_50: + cam_reg &= ~CPIA2_VP_FLICKER_MODES_NEVER_FLICKER; + cam_reg |= CPIA2_VP_FLICKER_MODES_50HZ; + break; + default: + return -EINVAL; + } + + if((err = cpia2_do_command(cam, CPIA2_CMD_SET_FLICKER_MODES, + TRANSFER_WRITE, cam_reg))) + return err; + + /* Set the appropriate bits in EXP_MODES, preserving the rest */ + if((err = cpia2_do_command(cam, CPIA2_CMD_GET_VP_EXP_MODES, + TRANSFER_READ, 0))) + return err; + cam_reg = cam->params.vp_params.exposure_modes; + + if (mode == NEVER_FLICKER) { + cam_reg |= CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER; + } else { + cam_reg &= ~CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER; + } + + if((err = cpia2_do_command(cam, CPIA2_CMD_SET_VP_EXP_MODES, + TRANSFER_WRITE, cam_reg))) + return err; + + if((err = cpia2_do_command(cam, CPIA2_CMD_REHASH_VP4, + TRANSFER_WRITE, 1))) + return err; + + switch(mode) { + case NEVER_FLICKER: + cam->params.flicker_control.flicker_mode_req = mode; + break; + case FLICKER_60: + cam->params.flicker_control.flicker_mode_req = mode; + cam->params.flicker_control.mains_frequency = 60; + break; + case FLICKER_50: + cam->params.flicker_control.flicker_mode_req = mode; + cam->params.flicker_control.mains_frequency = 50; + break; + default: + err = -EINVAL; + } + + return err; +} + +/****************************************************************************** + * + * cpia2_set_property_flip + * + *****************************************************************************/ +void cpia2_set_property_flip(struct camera_data *cam, int prop_val) +{ + unsigned char cam_reg; + + cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0); + cam_reg = cam->params.vp_params.user_effects; + + if (prop_val) + { + cam_reg |= CPIA2_VP_USER_EFFECTS_FLIP; + } + else + { + cam_reg &= ~CPIA2_VP_USER_EFFECTS_FLIP; + } + cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE, + cam_reg); +} + +/****************************************************************************** + * + * cpia2_set_property_mirror + * + *****************************************************************************/ +void cpia2_set_property_mirror(struct camera_data *cam, int prop_val) +{ + unsigned char cam_reg; + + cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, TRANSFER_READ, 0); + cam_reg = cam->params.vp_params.user_effects; + + if (prop_val) + { + cam_reg |= CPIA2_VP_USER_EFFECTS_MIRROR; + } + else + { + cam_reg &= ~CPIA2_VP_USER_EFFECTS_MIRROR; + } + cpia2_do_command(cam, CPIA2_CMD_SET_USER_EFFECTS, TRANSFER_WRITE, + cam_reg); +} + +/****************************************************************************** + * + * set_target_kb + * + * The new Target KB is set in cam->params.vc_params.target_kb and + * activates on reset. + *****************************************************************************/ + +int cpia2_set_target_kb(struct camera_data *cam, unsigned char value) +{ + DBG("Requested target_kb = %d\n", value); + if (value != cam->params.vc_params.target_kb) { + + cpia2_usb_stream_pause(cam); + + /* reset camera for new target_kb */ + cam->params.vc_params.target_kb = value; + cpia2_reset_camera(cam); + + cpia2_usb_stream_resume(cam); + } + + return 0; +} + +/****************************************************************************** + * + * cpia2_set_gpio + * + *****************************************************************************/ +int cpia2_set_gpio(struct camera_data *cam, unsigned char setting) +{ + int ret; + + /* Set the microport direction (register 0x90, should be defined + * already) to 1 (user output), and set the microport data (0x91) to + * the value in the ioctl argument. + */ + + ret = cpia2_do_command(cam, + CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, + CPIA2_VC_MP_DIR_OUTPUT, + 255); + if (ret < 0) + return ret; + cam->params.vp_params.gpio_direction = 255; + + ret = cpia2_do_command(cam, + CPIA2_CMD_SET_VC_MP_GPIO_DATA, + CPIA2_VC_MP_DIR_OUTPUT, + setting); + if (ret < 0) + return ret; + cam->params.vp_params.gpio_data = setting; + + return 0; +} + +/****************************************************************************** + * + * cpia2_set_fps + * + *****************************************************************************/ +int cpia2_set_fps(struct camera_data *cam, int framerate) +{ + int retval; + + switch(framerate) { + case CPIA2_VP_FRAMERATE_30: + case CPIA2_VP_FRAMERATE_25: + if(cam->params.pnp_id.device_type == DEVICE_STV_672 && + cam->params.version.sensor_flags == + CPIA2_VP_SENSOR_FLAGS_500) { + return -EINVAL; + } + /* Fall through */ + case CPIA2_VP_FRAMERATE_15: + case CPIA2_VP_FRAMERATE_12_5: + case CPIA2_VP_FRAMERATE_7_5: + case CPIA2_VP_FRAMERATE_6_25: + break; + default: + return -EINVAL; + } + + if (cam->params.pnp_id.device_type == DEVICE_STV_672 && + framerate == CPIA2_VP_FRAMERATE_15) + framerate = 0; /* Work around bug in VP4 */ + + retval = cpia2_do_command(cam, + CPIA2_CMD_FRAMERATE_REQ, + TRANSFER_WRITE, + framerate); + + if(retval == 0) + cam->params.vp_params.frame_rate = framerate; + + return retval; +} + +/****************************************************************************** + * + * cpia2_set_brightness + * + *****************************************************************************/ +void cpia2_set_brightness(struct camera_data *cam, unsigned char value) +{ + /*** + * Don't let the register be set to zero - bug in VP4 - flash of full + * brightness + ***/ + if (cam->params.pnp_id.device_type == DEVICE_STV_672 && value == 0) + value++; + DBG("Setting brightness to %d (0x%0x)\n", value, value); + cpia2_do_command(cam,CPIA2_CMD_SET_VP_BRIGHTNESS, TRANSFER_WRITE,value); +} + +/****************************************************************************** + * + * cpia2_set_contrast + * + *****************************************************************************/ +void cpia2_set_contrast(struct camera_data *cam, unsigned char value) +{ + DBG("Setting contrast to %d (0x%0x)\n", value, value); + cam->params.color_params.contrast = value; + cpia2_do_command(cam, CPIA2_CMD_SET_CONTRAST, TRANSFER_WRITE, value); +} + +/****************************************************************************** + * + * cpia2_set_saturation + * + *****************************************************************************/ +void cpia2_set_saturation(struct camera_data *cam, unsigned char value) +{ + DBG("Setting saturation to %d (0x%0x)\n", value, value); + cam->params.color_params.saturation = value; + cpia2_do_command(cam,CPIA2_CMD_SET_VP_SATURATION, TRANSFER_WRITE,value); +} + +/****************************************************************************** + * + * wake_system + * + *****************************************************************************/ +void wake_system(struct camera_data *cam) +{ + cpia2_do_command(cam, CPIA2_CMD_SET_WAKEUP, TRANSFER_WRITE, 0); +} + +/****************************************************************************** + * + * set_lowlight_boost + * + * Valid for STV500 sensor only + *****************************************************************************/ +void set_lowlight_boost(struct camera_data *cam) +{ + struct cpia2_command cmd; + + if (cam->params.pnp_id.device_type != DEVICE_STV_672 || + cam->params.version.sensor_flags != CPIA2_VP_SENSOR_FLAGS_500) + return; + + cmd.direction = TRANSFER_WRITE; + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 3; + cmd.start = CPIA2_VP_RAM_ADDR_H; + + cmd.buffer.block_data[0] = 0; /* High byte of address to write to */ + cmd.buffer.block_data[1] = 0x59; /* Low byte of address to write to */ + cmd.buffer.block_data[2] = 0; /* High byte of data to write */ + + cpia2_send_command(cam, &cmd); + + if (cam->params.vp_params.lowlight_boost) { + cmd.buffer.block_data[0] = 0x02; /* Low byte data to write */ + } else { + cmd.buffer.block_data[0] = 0x06; + } + cmd.start = CPIA2_VP_RAM_DATA; + cmd.reg_count = 1; + cpia2_send_command(cam, &cmd); + + /* Rehash the VP4 values */ + cpia2_do_command(cam, CPIA2_CMD_REHASH_VP4, TRANSFER_WRITE, 1); +} + +/****************************************************************************** + * + * cpia2_set_format + * + * Assumes that new size is already set in param struct. + *****************************************************************************/ +void cpia2_set_format(struct camera_data *cam) +{ + cam->flush = true; + + cpia2_usb_stream_pause(cam); + + /* reset camera to new size */ + cpia2_set_low_power(cam); + cpia2_reset_camera(cam); + cam->flush = false; + + cpia2_dbg_dump_registers(cam); + + cpia2_usb_stream_resume(cam); +} + +/****************************************************************************** + * + * cpia2_dbg_dump_registers + * + *****************************************************************************/ +void cpia2_dbg_dump_registers(struct camera_data *cam) +{ +#ifdef _CPIA2_DEBUG_ + struct cpia2_command cmd; + + if (!(debugs_on & DEBUG_DUMP_REGS)) + return; + + cmd.direction = TRANSFER_READ; + + /* Start with bank 0 (SYSTEM) */ + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_SYSTEM; + cmd.reg_count = 3; + cmd.start = 0; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "System Device Hi = 0x%X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "System Device Lo = 0x%X\n", + cmd.buffer.block_data[1]); + printk(KERN_DEBUG "System_system control = 0x%X\n", + cmd.buffer.block_data[2]); + + /* Bank 1 (VC) */ + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.reg_count = 4; + cmd.start = 0x80; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "ASIC_ID = 0x%X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "ASIC_REV = 0x%X\n", + cmd.buffer.block_data[1]); + printk(KERN_DEBUG "PW_CONTRL = 0x%X\n", + cmd.buffer.block_data[2]); + printk(KERN_DEBUG "WAKEUP = 0x%X\n", + cmd.buffer.block_data[3]); + + cmd.start = 0xA0; /* ST_CTRL */ + cmd.reg_count = 1; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "Stream ctrl = 0x%X\n", + cmd.buffer.block_data[0]); + + cmd.start = 0xA4; /* Stream status */ + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "Stream status = 0x%X\n", + cmd.buffer.block_data[0]); + + cmd.start = 0xA8; /* USB status */ + cmd.reg_count = 3; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "USB_CTRL = 0x%X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "USB_STRM = 0x%X\n", + cmd.buffer.block_data[1]); + printk(KERN_DEBUG "USB_STATUS = 0x%X\n", + cmd.buffer.block_data[2]); + + cmd.start = 0xAF; /* USB settings */ + cmd.reg_count = 1; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "USB settings = 0x%X\n", + cmd.buffer.block_data[0]); + + cmd.start = 0xC0; /* VC stuff */ + cmd.reg_count = 26; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "VC Control = 0x%0X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "VC Format = 0x%0X\n", + cmd.buffer.block_data[3]); + printk(KERN_DEBUG "VC Clocks = 0x%0X\n", + cmd.buffer.block_data[4]); + printk(KERN_DEBUG "VC IHSize = 0x%0X\n", + cmd.buffer.block_data[5]); + printk(KERN_DEBUG "VC Xlim Hi = 0x%0X\n", + cmd.buffer.block_data[6]); + printk(KERN_DEBUG "VC XLim Lo = 0x%0X\n", + cmd.buffer.block_data[7]); + printk(KERN_DEBUG "VC YLim Hi = 0x%0X\n", + cmd.buffer.block_data[8]); + printk(KERN_DEBUG "VC YLim Lo = 0x%0X\n", + cmd.buffer.block_data[9]); + printk(KERN_DEBUG "VC OHSize = 0x%0X\n", + cmd.buffer.block_data[10]); + printk(KERN_DEBUG "VC OVSize = 0x%0X\n", + cmd.buffer.block_data[11]); + printk(KERN_DEBUG "VC HCrop = 0x%0X\n", + cmd.buffer.block_data[12]); + printk(KERN_DEBUG "VC VCrop = 0x%0X\n", + cmd.buffer.block_data[13]); + printk(KERN_DEBUG "VC HPhase = 0x%0X\n", + cmd.buffer.block_data[14]); + printk(KERN_DEBUG "VC VPhase = 0x%0X\n", + cmd.buffer.block_data[15]); + printk(KERN_DEBUG "VC HIspan = 0x%0X\n", + cmd.buffer.block_data[16]); + printk(KERN_DEBUG "VC VIspan = 0x%0X\n", + cmd.buffer.block_data[17]); + printk(KERN_DEBUG "VC HiCrop = 0x%0X\n", + cmd.buffer.block_data[18]); + printk(KERN_DEBUG "VC ViCrop = 0x%0X\n", + cmd.buffer.block_data[19]); + printk(KERN_DEBUG "VC HiFract = 0x%0X\n", + cmd.buffer.block_data[20]); + printk(KERN_DEBUG "VC ViFract = 0x%0X\n", + cmd.buffer.block_data[21]); + printk(KERN_DEBUG "VC JPeg Opt = 0x%0X\n", + cmd.buffer.block_data[22]); + printk(KERN_DEBUG "VC Creep Per = 0x%0X\n", + cmd.buffer.block_data[23]); + printk(KERN_DEBUG "VC User Sq. = 0x%0X\n", + cmd.buffer.block_data[24]); + printk(KERN_DEBUG "VC Target KB = 0x%0X\n", + cmd.buffer.block_data[25]); + + /*** VP ***/ + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VP; + cmd.reg_count = 14; + cmd.start = 0; + cpia2_send_command(cam, &cmd); + + printk(KERN_DEBUG "VP Dev Hi = 0x%0X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "VP Dev Lo = 0x%0X\n", + cmd.buffer.block_data[1]); + printk(KERN_DEBUG "VP Sys State = 0x%0X\n", + cmd.buffer.block_data[2]); + printk(KERN_DEBUG "VP Sys Ctrl = 0x%0X\n", + cmd.buffer.block_data[3]); + printk(KERN_DEBUG "VP Sensor flg = 0x%0X\n", + cmd.buffer.block_data[5]); + printk(KERN_DEBUG "VP Sensor Rev = 0x%0X\n", + cmd.buffer.block_data[6]); + printk(KERN_DEBUG "VP Dev Config = 0x%0X\n", + cmd.buffer.block_data[7]); + printk(KERN_DEBUG "VP GPIO_DIR = 0x%0X\n", + cmd.buffer.block_data[8]); + printk(KERN_DEBUG "VP GPIO_DATA = 0x%0X\n", + cmd.buffer.block_data[9]); + printk(KERN_DEBUG "VP Ram ADDR H = 0x%0X\n", + cmd.buffer.block_data[10]); + printk(KERN_DEBUG "VP Ram ADDR L = 0x%0X\n", + cmd.buffer.block_data[11]); + printk(KERN_DEBUG "VP RAM Data = 0x%0X\n", + cmd.buffer.block_data[12]); + printk(KERN_DEBUG "Do Call = 0x%0X\n", + cmd.buffer.block_data[13]); + + if (cam->params.pnp_id.device_type == DEVICE_STV_672) { + cmd.reg_count = 9; + cmd.start = 0x0E; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n", + cmd.buffer.block_data[1]); + printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n", + cmd.buffer.block_data[2]); + printk(KERN_DEBUG "VP Framerate = 0x%0X\n", + cmd.buffer.block_data[3]); + printk(KERN_DEBUG "VP UserEffect = 0x%0X\n", + cmd.buffer.block_data[4]); + printk(KERN_DEBUG "VP White Bal = 0x%0X\n", + cmd.buffer.block_data[5]); + printk(KERN_DEBUG "VP WB thresh = 0x%0X\n", + cmd.buffer.block_data[6]); + printk(KERN_DEBUG "VP Exp Modes = 0x%0X\n", + cmd.buffer.block_data[7]); + printk(KERN_DEBUG "VP Exp Target = 0x%0X\n", + cmd.buffer.block_data[8]); + + cmd.reg_count = 1; + cmd.start = 0x1B; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "VP FlickerMds = 0x%0X\n", + cmd.buffer.block_data[0]); + } else { + cmd.reg_count = 8 ; + cmd.start = 0x0E; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "VP Clock Ctrl = 0x%0X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "VP Patch Rev = 0x%0X\n", + cmd.buffer.block_data[1]); + printk(KERN_DEBUG "VP Vid Mode = 0x%0X\n", + cmd.buffer.block_data[5]); + printk(KERN_DEBUG "VP Framerate = 0x%0X\n", + cmd.buffer.block_data[6]); + printk(KERN_DEBUG "VP UserEffect = 0x%0X\n", + cmd.buffer.block_data[7]); + + cmd.reg_count = 1; + cmd.start = CPIA2_VP5_EXPOSURE_TARGET; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "VP5 Exp Target= 0x%0X\n", + cmd.buffer.block_data[0]); + + cmd.reg_count = 4; + cmd.start = 0x3A; + cpia2_send_command(cam, &cmd); + printk(KERN_DEBUG "VP5 MY Black = 0x%0X\n", + cmd.buffer.block_data[0]); + printk(KERN_DEBUG "VP5 MCY Range = 0x%0X\n", + cmd.buffer.block_data[1]); + printk(KERN_DEBUG "VP5 MYCEILING = 0x%0X\n", + cmd.buffer.block_data[2]); + printk(KERN_DEBUG "VP5 MCUV Sat = 0x%0X\n", + cmd.buffer.block_data[3]); + } +#endif +} + +/****************************************************************************** + * + * reset_camera_struct + * + * Sets all values to the defaults + *****************************************************************************/ +void reset_camera_struct(struct camera_data *cam) +{ + /*** + * The following parameter values are the defaults from the register map. + ***/ + cam->params.color_params.brightness = DEFAULT_BRIGHTNESS; + cam->params.color_params.contrast = DEFAULT_CONTRAST; + cam->params.color_params.saturation = DEFAULT_SATURATION; + cam->params.vp_params.lowlight_boost = 0; + + /* FlickerModes */ + cam->params.flicker_control.flicker_mode_req = NEVER_FLICKER; + cam->params.flicker_control.mains_frequency = 60; + + /* jpeg params */ + cam->params.compression.jpeg_options = CPIA2_VC_VC_JPEG_OPT_DEFAULT; + cam->params.compression.creep_period = 2; + cam->params.compression.user_squeeze = 20; + cam->params.compression.inhibit_htables = false; + + /* gpio params */ + cam->params.vp_params.gpio_direction = 0; /* write, the default safe mode */ + cam->params.vp_params.gpio_data = 0; + + /* Target kb params */ + cam->params.vc_params.target_kb = DEFAULT_TARGET_KB; + + /*** + * Set Sensor FPS as fast as possible. + ***/ + if(cam->params.pnp_id.device_type == DEVICE_STV_672) { + if(cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500) + cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_15; + else + cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_30; + } else { + cam->params.vp_params.frame_rate = CPIA2_VP_FRAMERATE_30; + } + + /*** + * Set default video mode as large as possible : + * for vga sensor set to vga, for cif sensor set to CIF. + ***/ + if (cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500) { + cam->sensor_type = CPIA2_SENSOR_500; + cam->video_size = VIDEOSIZE_VGA; + cam->params.roi.width = STV_IMAGE_VGA_COLS; + cam->params.roi.height = STV_IMAGE_VGA_ROWS; + } else { + cam->sensor_type = CPIA2_SENSOR_410; + cam->video_size = VIDEOSIZE_CIF; + cam->params.roi.width = STV_IMAGE_CIF_COLS; + cam->params.roi.height = STV_IMAGE_CIF_ROWS; + } + + /*** + * Fill in the v4l structures. video_cap is filled in inside the VIDIOCCAP + * Ioctl. Here, just do the window and picture stucts. + ***/ + cam->vp.palette = (u16) VIDEO_PALETTE_RGB24; /* Is this right? */ + cam->vp.brightness = (u16) cam->params.color_params.brightness * 256; + cam->vp.colour = (u16) cam->params.color_params.saturation * 256; + cam->vp.contrast = (u16) cam->params.color_params.contrast * 256; + + cam->vw.x = 0; + cam->vw.y = 0; + cam->vw.width = cam->params.roi.width; + cam->vw.height = cam->params.roi.height; + cam->vw.flags = 0; + cam->vw.clipcount = 0; + + return; +} + +/****************************************************************************** + * + * cpia2_init_camera_struct + * + * Initializes camera struct, does not call reset to fill in defaults. + *****************************************************************************/ +struct camera_data *cpia2_init_camera_struct(void) +{ + struct camera_data *cam; + + cam = kmalloc(sizeof(*cam), GFP_KERNEL); + + if (!cam) { + ERR("couldn't kmalloc cpia2 struct\n"); + return NULL; + } + + /* Default everything to 0 */ + memset(cam, 0, sizeof(struct camera_data)); + + cam->present = 1; + mutex_init(&cam->busy_lock); + init_waitqueue_head(&cam->wq_stream); + + return cam; +} + +/****************************************************************************** + * + * cpia2_init_camera + * + * Initializes camera. + *****************************************************************************/ +int cpia2_init_camera(struct camera_data *cam) +{ + DBG("Start\n"); + + cam->mmapped = false; + + /* Get sensor and asic types before reset. */ + cpia2_set_high_power(cam); + cpia2_get_version_info(cam); + if (cam->params.version.asic_id != CPIA2_ASIC_672) { + ERR("Device IO error (asicID has incorrect value of 0x%X\n", + cam->params.version.asic_id); + return -ENODEV; + } + + /* Set GPIO direction and data to a safe state. */ + cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, + TRANSFER_WRITE, 0); + cpia2_do_command(cam, CPIA2_CMD_SET_VC_MP_GPIO_DATA, + TRANSFER_WRITE, 0); + + /* resetting struct requires version info for sensor and asic types */ + reset_camera_struct(cam); + + cpia2_set_low_power(cam); + + DBG("End\n"); + + return 0; +} + +/****************************************************************************** + * + * cpia2_allocate_buffers + * + *****************************************************************************/ +int cpia2_allocate_buffers(struct camera_data *cam) +{ + int i; + + if(!cam->buffers) { + u32 size = cam->num_frames*sizeof(struct framebuf); + cam->buffers = kmalloc(size, GFP_KERNEL); + if(!cam->buffers) { + ERR("couldn't kmalloc frame buffer structures\n"); + return -ENOMEM; + } + } + + if(!cam->frame_buffer) { + cam->frame_buffer = rvmalloc(cam->frame_size*cam->num_frames); + if (!cam->frame_buffer) { + ERR("couldn't vmalloc frame buffer data area\n"); + kfree(cam->buffers); + cam->buffers = NULL; + return -ENOMEM; + } + } + + for(i=0; i<cam->num_frames-1; ++i) { + cam->buffers[i].next = &cam->buffers[i+1]; + cam->buffers[i].data = cam->frame_buffer +i*cam->frame_size; + cam->buffers[i].status = FRAME_EMPTY; + cam->buffers[i].length = 0; + cam->buffers[i].max_length = 0; + cam->buffers[i].num = i; + } + cam->buffers[i].next = cam->buffers; + cam->buffers[i].data = cam->frame_buffer +i*cam->frame_size; + cam->buffers[i].status = FRAME_EMPTY; + cam->buffers[i].length = 0; + cam->buffers[i].max_length = 0; + cam->buffers[i].num = i; + cam->curbuff = cam->buffers; + cam->workbuff = cam->curbuff->next; + DBG("buffers=%p, curbuff=%p, workbuff=%p\n", cam->buffers, cam->curbuff, + cam->workbuff); + return 0; +} + +/****************************************************************************** + * + * cpia2_free_buffers + * + *****************************************************************************/ +void cpia2_free_buffers(struct camera_data *cam) +{ + if(cam->buffers) { + kfree(cam->buffers); + cam->buffers = NULL; + } + if(cam->frame_buffer) { + rvfree(cam->frame_buffer, cam->frame_size*cam->num_frames); + cam->frame_buffer = NULL; + } +} + +/****************************************************************************** + * + * cpia2_read + * + *****************************************************************************/ +long cpia2_read(struct camera_data *cam, + char __user *buf, unsigned long count, int noblock) +{ + struct framebuf *frame; + if (!count) { + return 0; + } + + if (!buf) { + ERR("%s: buffer NULL\n",__FUNCTION__); + return -EINVAL; + } + + if (!cam) { + ERR("%s: Internal error, camera_data NULL!\n",__FUNCTION__); + return -EINVAL; + } + + /* make this _really_ smp and multithread-safe */ + if (mutex_lock_interruptible(&cam->busy_lock)) + return -ERESTARTSYS; + + if (!cam->present) { + LOG("%s: camera removed\n",__FUNCTION__); + mutex_unlock(&cam->busy_lock); + return 0; /* EOF */ + } + + if(!cam->streaming) { + /* Start streaming */ + cpia2_usb_stream_start(cam, + cam->params.camera_state.stream_mode); + } + + /* Copy cam->curbuff in case it changes while we're processing */ + frame = cam->curbuff; + if (noblock && frame->status != FRAME_READY) { + mutex_unlock(&cam->busy_lock); + return -EAGAIN; + } + + if(frame->status != FRAME_READY) { + mutex_unlock(&cam->busy_lock); + wait_event_interruptible(cam->wq_stream, + !cam->present || + (frame = cam->curbuff)->status == FRAME_READY); + if (signal_pending(current)) + return -ERESTARTSYS; + /* make this _really_ smp and multithread-safe */ + if (mutex_lock_interruptible(&cam->busy_lock)) { + return -ERESTARTSYS; + } + if(!cam->present) { + mutex_unlock(&cam->busy_lock); + return 0; + } + } + + /* copy data to user space */ + if (frame->length > count) { + mutex_unlock(&cam->busy_lock); + return -EFAULT; + } + if (copy_to_user(buf, frame->data, frame->length)) { + mutex_unlock(&cam->busy_lock); + return -EFAULT; + } + + count = frame->length; + + frame->status = FRAME_EMPTY; + + mutex_unlock(&cam->busy_lock); + return count; +} + +/****************************************************************************** + * + * cpia2_poll + * + *****************************************************************************/ +unsigned int cpia2_poll(struct camera_data *cam, struct file *filp, + poll_table *wait) +{ + unsigned int status=0; + + if(!cam) { + ERR("%s: Internal error, camera_data not found!\n",__FUNCTION__); + return POLLERR; + } + + mutex_lock(&cam->busy_lock); + + if(!cam->present) { + mutex_unlock(&cam->busy_lock); + return POLLHUP; + } + + if(!cam->streaming) { + /* Start streaming */ + cpia2_usb_stream_start(cam, + cam->params.camera_state.stream_mode); + } + + mutex_unlock(&cam->busy_lock); + poll_wait(filp, &cam->wq_stream, wait); + mutex_lock(&cam->busy_lock); + + if(!cam->present) + status = POLLHUP; + else if(cam->curbuff->status == FRAME_READY) + status = POLLIN | POLLRDNORM; + + mutex_unlock(&cam->busy_lock); + return status; +} + +/****************************************************************************** + * + * cpia2_remap_buffer + * + *****************************************************************************/ +int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma) +{ + const char *adr = (const char *)vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long start_offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long start = (unsigned long) adr; + unsigned long page, pos; + + if (!cam) + return -ENODEV; + + DBG("mmap offset:%ld size:%ld\n", start_offset, size); + + /* make this _really_ smp-safe */ + if (mutex_lock_interruptible(&cam->busy_lock)) + return -ERESTARTSYS; + + if (!cam->present) { + mutex_unlock(&cam->busy_lock); + return -ENODEV; + } + + if (size > cam->frame_size*cam->num_frames || + (start_offset % cam->frame_size) != 0 || + (start_offset+size > cam->frame_size*cam->num_frames)) { + mutex_unlock(&cam->busy_lock); + return -EINVAL; + } + + pos = ((unsigned long) (cam->frame_buffer)) + start_offset; + while (size > 0) { + page = kvirt_to_pa(pos); + if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&cam->busy_lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + cam->mmapped = true; + mutex_unlock(&cam->busy_lock); + return 0; +} + diff --git a/drivers/media/video/cpia2/cpia2_registers.h b/drivers/media/video/cpia2/cpia2_registers.h new file mode 100644 index 000000000000..3bbec514a967 --- /dev/null +++ b/drivers/media/video/cpia2/cpia2_registers.h @@ -0,0 +1,476 @@ +/**************************************************************************** + * + * Filename: cpia2registers.h + * + * Copyright 2001, STMicrolectronics, Inc. + * + * Description: + * Definitions for the CPia2 register set + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ****************************************************************************/ + +#ifndef CPIA2_REGISTER_HEADER +#define CPIA2_REGISTER_HEADER + +/*** + * System register set (Bank 0) + ***/ +#define CPIA2_SYSTEM_DEVICE_HI 0x00 +#define CPIA2_SYSTEM_DEVICE_LO 0x01 + +#define CPIA2_SYSTEM_SYSTEM_CONTROL 0x02 +#define CPIA2_SYSTEM_CONTROL_LOW_POWER 0x00 +#define CPIA2_SYSTEM_CONTROL_HIGH_POWER 0x01 +#define CPIA2_SYSTEM_CONTROL_SUSPEND 0x02 +#define CPIA2_SYSTEM_CONTROL_V2W_ERR 0x10 +#define CPIA2_SYSTEM_CONTROL_RB_ERR 0x10 +#define CPIA2_SYSTEM_CONTROL_CLEAR_ERR 0x80 + +#define CPIA2_SYSTEM_INT_PACKET_CTRL 0x04 +#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_SW_XX 0x01 +#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_EOF 0x02 +#define CPIA2_SYSTEM_INT_PACKET_CTRL_ENABLE_INT1 0x04 + +#define CPIA2_SYSTEM_CACHE_CTRL 0x05 +#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_RESET 0x01 +#define CPIA2_SYSTEM_CACHE_CTRL_CACHE_FLUSH 0x02 + +#define CPIA2_SYSTEM_SERIAL_CTRL 0x06 +#define CPIA2_SYSTEM_SERIAL_CTRL_NULL_CMD 0x00 +#define CPIA2_SYSTEM_SERIAL_CTRL_START_CMD 0x01 +#define CPIA2_SYSTEM_SERIAL_CTRL_STOP_CMD 0x02 +#define CPIA2_SYSTEM_SERIAL_CTRL_WRITE_CMD 0x03 +#define CPIA2_SYSTEM_SERIAL_CTRL_READ_ACK_CMD 0x04 +#define CPIA2_SYSTEM_SERIAL_CTRL_READ_NACK_CMD 0x05 + +#define CPIA2_SYSTEM_SERIAL_DATA 0x07 + +#define CPIA2_SYSTEM_VP_SERIAL_ADDR 0x08 + +/*** + * I2C addresses for various devices in CPiA2 + ***/ +#define CPIA2_SYSTEM_VP_SERIAL_ADDR_SENSOR 0x20 +#define CPIA2_SYSTEM_VP_SERIAL_ADDR_VP 0x88 +#define CPIA2_SYSTEM_VP_SERIAL_ADDR_676_VP 0x8A + +#define CPIA2_SYSTEM_SPARE_REG1 0x09 +#define CPIA2_SYSTEM_SPARE_REG2 0x0A +#define CPIA2_SYSTEM_SPARE_REG3 0x0B + +#define CPIA2_SYSTEM_MC_PORT_0 0x0C +#define CPIA2_SYSTEM_MC_PORT_1 0x0D +#define CPIA2_SYSTEM_MC_PORT_2 0x0E +#define CPIA2_SYSTEM_MC_PORT_3 0x0F + +#define CPIA2_SYSTEM_STATUS_PKT 0x20 +#define CPIA2_SYSTEM_STATUS_PKT_END 0x27 + +#define CPIA2_SYSTEM_DESCRIP_VID_HI 0x30 +#define CPIA2_SYSTEM_DESCRIP_VID_LO 0x31 +#define CPIA2_SYSTEM_DESCRIP_PID_HI 0x32 +#define CPIA2_SYSTEM_DESCRIP_PID_LO 0x33 + +#define CPIA2_SYSTEM_FW_VERSION_HI 0x34 +#define CPIA2_SYSTEM_FW_VERSION_LO 0x35 + +#define CPIA2_SYSTEM_CACHE_START_INDEX 0x80 +#define CPIA2_SYSTEM_CACHE_MAX_WRITES 0x10 + +/*** + * VC register set (Bank 1) + ***/ +#define CPIA2_VC_ASIC_ID 0x80 + +#define CPIA2_VC_ASIC_REV 0x81 + +#define CPIA2_VC_PW_CTRL 0x82 +#define CPIA2_VC_PW_CTRL_COLDSTART 0x01 +#define CPIA2_VC_PW_CTRL_CP_CLK_EN 0x02 +#define CPIA2_VC_PW_CTRL_VP_RESET_N 0x04 +#define CPIA2_VC_PW_CTRL_VC_CLK_EN 0x08 +#define CPIA2_VC_PW_CTRL_VC_RESET_N 0x10 +#define CPIA2_VC_PW_CTRL_GOTO_SUSPEND 0x20 +#define CPIA2_VC_PW_CTRL_UDC_SUSPEND 0x40 +#define CPIA2_VC_PW_CTRL_PWR_DOWN 0x80 + +#define CPIA2_VC_WAKEUP 0x83 +#define CPIA2_VC_WAKEUP_SW_ENABLE 0x01 +#define CPIA2_VC_WAKEUP_XX_ENABLE 0x02 +#define CPIA2_VC_WAKEUP_SW_ATWAKEUP 0x04 +#define CPIA2_VC_WAKEUP_XX_ATWAKEUP 0x08 + +#define CPIA2_VC_CLOCK_CTRL 0x84 +#define CPIA2_VC_CLOCK_CTRL_TESTUP72 0x01 + +#define CPIA2_VC_INT_ENABLE 0x88 +#define CPIA2_VC_INT_ENABLE_XX_IE 0x01 +#define CPIA2_VC_INT_ENABLE_SW_IE 0x02 +#define CPIA2_VC_INT_ENABLE_VC_IE 0x04 +#define CPIA2_VC_INT_ENABLE_USBDATA_IE 0x08 +#define CPIA2_VC_INT_ENABLE_USBSETUP_IE 0x10 +#define CPIA2_VC_INT_ENABLE_USBCFG_IE 0x20 + +#define CPIA2_VC_INT_FLAG 0x89 +#define CPIA2_VC_INT_ENABLE_XX_FLAG 0x01 +#define CPIA2_VC_INT_ENABLE_SW_FLAG 0x02 +#define CPIA2_VC_INT_ENABLE_VC_FLAG 0x04 +#define CPIA2_VC_INT_ENABLE_USBDATA_FLAG 0x08 +#define CPIA2_VC_INT_ENABLE_USBSETUP_FLAG 0x10 +#define CPIA2_VC_INT_ENABLE_USBCFG_FLAG 0x20 +#define CPIA2_VC_INT_ENABLE_SET_RESET_BIT 0x80 + +#define CPIA2_VC_INT_STATE 0x8A +#define CPIA2_VC_INT_STATE_XX_STATE 0x01 +#define CPIA2_VC_INT_STATE_SW_STATE 0x02 + +#define CPIA2_VC_MP_DIR 0x90 +#define CPIA2_VC_MP_DIR_INPUT 0x00 +#define CPIA2_VC_MP_DIR_OUTPUT 0x01 + +#define CPIA2_VC_MP_DATA 0x91 + +#define CPIA2_VC_DP_CTRL 0x98 +#define CPIA2_VC_DP_CTRL_MODE_0 0x00 +#define CPIA2_VC_DP_CTRL_MODE_A 0x01 +#define CPIA2_VC_DP_CTRL_MODE_B 0x02 +#define CPIA2_VC_DP_CTRL_MODE_C 0x03 +#define CPIA2_VC_DP_CTRL_FAKE_FST 0x04 + +#define CPIA2_VC_AD_CTRL 0x99 +#define CPIA2_VC_AD_CTRL_SRC_0 0x00 +#define CPIA2_VC_AD_CTRL_SRC_DIGI_A 0x01 +#define CPIA2_VC_AD_CTRL_SRC_REG 0x02 +#define CPIA2_VC_AD_CTRL_DST_USB 0x00 +#define CPIA2_VC_AD_CTRL_DST_REG 0x04 + +#define CPIA2_VC_AD_TEST_IN 0x9B + +#define CPIA2_VC_AD_TEST_OUT 0x9C + +#define CPIA2_VC_AD_STATUS 0x9D +#define CPIA2_VC_AD_STATUS_EMPTY 0x01 +#define CPIA2_VC_AD_STATUS_FULL 0x02 + +#define CPIA2_VC_DP_DATA 0x9E + +#define CPIA2_VC_ST_CTRL 0xA0 +#define CPIA2_VC_ST_CTRL_SRC_VC 0x00 +#define CPIA2_VC_ST_CTRL_SRC_DP 0x01 +#define CPIA2_VC_ST_CTRL_SRC_REG 0x02 + +#define CPIA2_VC_ST_CTRL_RAW_SELECT 0x04 + +#define CPIA2_VC_ST_CTRL_DST_USB 0x00 +#define CPIA2_VC_ST_CTRL_DST_DP 0x08 +#define CPIA2_VC_ST_CTRL_DST_REG 0x10 + +#define CPIA2_VC_ST_CTRL_FIFO_ENABLE 0x20 +#define CPIA2_VC_ST_CTRL_EOF_DETECT 0x40 + +#define CPIA2_VC_ST_TEST 0xA1 +#define CPIA2_VC_ST_TEST_MODE_MANUAL 0x00 +#define CPIA2_VC_ST_TEST_MODE_INCREMENT 0x02 + +#define CPIA2_VC_ST_TEST_AUTO_FILL 0x08 + +#define CPIA2_VC_ST_TEST_REPEAT_FIFO 0x10 + +#define CPIA2_VC_ST_TEST_IN 0xA2 + +#define CPIA2_VC_ST_TEST_OUT 0xA3 + +#define CPIA2_VC_ST_STATUS 0xA4 +#define CPIA2_VC_ST_STATUS_EMPTY 0x01 +#define CPIA2_VC_ST_STATUS_FULL 0x02 + +#define CPIA2_VC_ST_FRAME_DETECT_1 0xA5 + +#define CPIA2_VC_ST_FRAME_DETECT_2 0xA6 + +#define CPIA2_VC_USB_CTRL 0xA8 +#define CPIA2_VC_USB_CTRL_CMD_STALLED 0x01 +#define CPIA2_VC_USB_CTRL_CMD_READY 0x02 +#define CPIA2_VC_USB_CTRL_CMD_STATUS 0x04 +#define CPIA2_VC_USB_CTRL_CMD_STATUS_DIR 0x08 +#define CPIA2_VC_USB_CTRL_CMD_NO_CLASH 0x10 +#define CPIA2_VC_USB_CTRL_CMD_MICRO_ACCESS 0x80 + +#define CPIA2_VC_USB_STRM 0xA9 +#define CPIA2_VC_USB_STRM_ISO_ENABLE 0x01 +#define CPIA2_VC_USB_STRM_BLK_ENABLE 0x02 +#define CPIA2_VC_USB_STRM_INT_ENABLE 0x04 +#define CPIA2_VC_USB_STRM_AUD_ENABLE 0x08 + +#define CPIA2_VC_USB_STATUS 0xAA +#define CPIA2_VC_USB_STATUS_CMD_IN_PROGRESS 0x01 +#define CPIA2_VC_USB_STATUS_CMD_STATUS_STALL 0x02 +#define CPIA2_VC_USB_STATUS_CMD_HANDSHAKE 0x04 +#define CPIA2_VC_USB_STATUS_CMD_OVERRIDE 0x08 +#define CPIA2_VC_USB_STATUS_CMD_FIFO_BUSY 0x10 +#define CPIA2_VC_USB_STATUS_BULK_REPEAT_TXN 0x20 +#define CPIA2_VC_USB_STATUS_CONFIG_DONE 0x40 +#define CPIA2_VC_USB_STATUS_USB_SUSPEND 0x80 + +#define CPIA2_VC_USB_CMDW 0xAB + +#define CPIA2_VC_USB_DATARW 0xAC + +#define CPIA2_VC_USB_INFO 0xAD + +#define CPIA2_VC_USB_CONFIG 0xAE + +#define CPIA2_VC_USB_SETTINGS 0xAF +#define CPIA2_VC_USB_SETTINGS_CONFIG_MASK 0x03 +#define CPIA2_VC_USB_SETTINGS_INTERFACE_MASK 0x0C +#define CPIA2_VC_USB_SETTINGS_ALTERNATE_MASK 0x70 + +#define CPIA2_VC_USB_ISOLIM 0xB0 + +#define CPIA2_VC_USB_ISOFAILS 0xB1 + +#define CPIA2_VC_USB_ISOMAXPKTHI 0xB2 + +#define CPIA2_VC_USB_ISOMAXPKTLO 0xB3 + +#define CPIA2_VC_V2W_CTRL 0xB8 +#define CPIA2_VC_V2W_SELECT 0x01 + +#define CPIA2_VC_V2W_SCL 0xB9 + +#define CPIA2_VC_V2W_SDA 0xBA + +#define CPIA2_VC_VC_CTRL 0xC0 +#define CPIA2_VC_VC_CTRL_RUN 0x01 +#define CPIA2_VC_VC_CTRL_SINGLESHOT 0x02 +#define CPIA2_VC_VC_CTRL_IDLING 0x04 +#define CPIA2_VC_VC_CTRL_INHIBIT_H_TABLES 0x10 +#define CPIA2_VC_VC_CTRL_INHIBIT_Q_TABLES 0x20 +#define CPIA2_VC_VC_CTRL_INHIBIT_PRIVATE 0x40 + +#define CPIA2_VC_VC_RESTART_IVAL_HI 0xC1 + +#define CPIA2_VC_VC_RESTART_IVAL_LO 0xC2 + +#define CPIA2_VC_VC_FORMAT 0xC3 +#define CPIA2_VC_VC_FORMAT_UFIRST 0x01 +#define CPIA2_VC_VC_FORMAT_MONO 0x02 +#define CPIA2_VC_VC_FORMAT_DECIMATING 0x04 +#define CPIA2_VC_VC_FORMAT_SHORTLINE 0x08 +#define CPIA2_VC_VC_FORMAT_SELFTEST 0x10 + +#define CPIA2_VC_VC_CLOCKS 0xC4 +#define CPIA2_VC_VC_CLOCKS_CLKDIV_MASK 0x03 +#define CPIA2_VC_VC_672_CLOCKS_CIF_DIV_BY_3 0x04 +#define CPIA2_VC_VC_672_CLOCKS_SCALING 0x08 +#define CPIA2_VC_VC_CLOCKS_LOGDIV0 0x00 +#define CPIA2_VC_VC_CLOCKS_LOGDIV1 0x01 +#define CPIA2_VC_VC_CLOCKS_LOGDIV2 0x02 +#define CPIA2_VC_VC_CLOCKS_LOGDIV3 0x03 +#define CPIA2_VC_VC_676_CLOCKS_CIF_DIV_BY_3 0x08 +#define CPIA2_VC_VC_676_CLOCKS_SCALING 0x10 + +#define CPIA2_VC_VC_IHSIZE_LO 0xC5 + +#define CPIA2_VC_VC_XLIM_HI 0xC6 + +#define CPIA2_VC_VC_XLIM_LO 0xC7 + +#define CPIA2_VC_VC_YLIM_HI 0xC8 + +#define CPIA2_VC_VC_YLIM_LO 0xC9 + +#define CPIA2_VC_VC_OHSIZE 0xCA + +#define CPIA2_VC_VC_OVSIZE 0xCB + +#define CPIA2_VC_VC_HCROP 0xCC + +#define CPIA2_VC_VC_VCROP 0xCD + +#define CPIA2_VC_VC_HPHASE 0xCE + +#define CPIA2_VC_VC_VPHASE 0xCF + +#define CPIA2_VC_VC_HISPAN 0xD0 + +#define CPIA2_VC_VC_VISPAN 0xD1 + +#define CPIA2_VC_VC_HICROP 0xD2 + +#define CPIA2_VC_VC_VICROP 0xD3 + +#define CPIA2_VC_VC_HFRACT 0xD4 +#define CPIA2_VC_VC_HFRACT_DEN_MASK 0x0F +#define CPIA2_VC_VC_HFRACT_NUM_MASK 0xF0 + +#define CPIA2_VC_VC_VFRACT 0xD5 +#define CPIA2_VC_VC_VFRACT_DEN_MASK 0x0F +#define CPIA2_VC_VC_VFRACT_NUM_MASK 0xF0 + +#define CPIA2_VC_VC_JPEG_OPT 0xD6 +#define CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE 0x01 +#define CPIA2_VC_VC_JPEG_OPT_NO_DC_AUTO_SQUEEZE 0x02 +#define CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE 0x04 +#define CPIA2_VC_VC_JPEG_OPT_DEFAULT (CPIA2_VC_VC_JPEG_OPT_DOUBLE_SQUEEZE|\ + CPIA2_VC_VC_JPEG_OPT_AUTO_SQUEEZE) + + +#define CPIA2_VC_VC_CREEP_PERIOD 0xD7 +#define CPIA2_VC_VC_USER_SQUEEZE 0xD8 +#define CPIA2_VC_VC_TARGET_KB 0xD9 + +#define CPIA2_VC_VC_AUTO_SQUEEZE 0xE6 + + +/*** + * VP register set (Bank 2) + ***/ +#define CPIA2_VP_DEVICEH 0 +#define CPIA2_VP_DEVICEL 1 + +#define CPIA2_VP_SYSTEMSTATE 0x02 +#define CPIA2_VP_SYSTEMSTATE_HK_ALIVE 0x01 + +#define CPIA2_VP_SYSTEMCTRL 0x03 +#define CPIA2_VP_SYSTEMCTRL_REQ_CLEAR_ERROR 0x80 +#define CPIA2_VP_SYSTEMCTRL_POWER_DOWN_PLL 0x20 +#define CPIA2_VP_SYSTEMCTRL_REQ_SUSPEND_STATE 0x10 +#define CPIA2_VP_SYSTEMCTRL_REQ_SERIAL_WAKEUP 0x08 +#define CPIA2_VP_SYSTEMCTRL_REQ_AUTOLOAD 0x04 +#define CPIA2_VP_SYSTEMCTRL_HK_CONTROL 0x02 +#define CPIA2_VP_SYSTEMCTRL_POWER_CONTROL 0x01 + +#define CPIA2_VP_SENSOR_FLAGS 0x05 +#define CPIA2_VP_SENSOR_FLAGS_404 0x01 +#define CPIA2_VP_SENSOR_FLAGS_407 0x02 +#define CPIA2_VP_SENSOR_FLAGS_409 0x04 +#define CPIA2_VP_SENSOR_FLAGS_410 0x08 +#define CPIA2_VP_SENSOR_FLAGS_500 0x10 + +#define CPIA2_VP_SENSOR_REV 0x06 + +#define CPIA2_VP_DEVICE_CONFIG 0x07 +#define CPIA2_VP_DEVICE_CONFIG_SERIAL_BRIDGE 0x01 + +#define CPIA2_VP_GPIO_DIRECTION 0x08 +#define CPIA2_VP_GPIO_READ 0xFF +#define CPIA2_VP_GPIO_WRITE 0x00 + +#define CPIA2_VP_GPIO_DATA 0x09 + +#define CPIA2_VP_RAM_ADDR_H 0x0A +#define CPIA2_VP_RAM_ADDR_L 0x0B +#define CPIA2_VP_RAM_DATA 0x0C + +#define CPIA2_VP_PATCH_REV 0x0F + +#define CPIA2_VP4_USER_MODE 0x10 +#define CPIA2_VP5_USER_MODE 0x13 +#define CPIA2_VP_USER_MODE_CIF 0x01 +#define CPIA2_VP_USER_MODE_QCIFDS 0x02 +#define CPIA2_VP_USER_MODE_QCIFPTC 0x04 +#define CPIA2_VP_USER_MODE_QVGADS 0x08 +#define CPIA2_VP_USER_MODE_QVGAPTC 0x10 +#define CPIA2_VP_USER_MODE_VGA 0x20 + +#define CPIA2_VP4_FRAMERATE_REQUEST 0x11 +#define CPIA2_VP5_FRAMERATE_REQUEST 0x14 +#define CPIA2_VP_FRAMERATE_60 0x80 +#define CPIA2_VP_FRAMERATE_50 0x40 +#define CPIA2_VP_FRAMERATE_30 0x20 +#define CPIA2_VP_FRAMERATE_25 0x10 +#define CPIA2_VP_FRAMERATE_15 0x08 +#define CPIA2_VP_FRAMERATE_12_5 0x04 +#define CPIA2_VP_FRAMERATE_7_5 0x02 +#define CPIA2_VP_FRAMERATE_6_25 0x01 + +#define CPIA2_VP4_USER_EFFECTS 0x12 +#define CPIA2_VP5_USER_EFFECTS 0x15 +#define CPIA2_VP_USER_EFFECTS_COLBARS 0x01 +#define CPIA2_VP_USER_EFFECTS_COLBARS_GRAD 0x02 +#define CPIA2_VP_USER_EFFECTS_MIRROR 0x04 +#define CPIA2_VP_USER_EFFECTS_FLIP 0x40 // VP5 only + +/* NOTE: CPIA2_VP_EXPOSURE_MODES shares the same register as VP5 User + * Effects */ +#define CPIA2_VP_EXPOSURE_MODES 0x15 +#define CPIA2_VP_EXPOSURE_MODES_INHIBIT_FLICKER 0x20 +#define CPIA2_VP_EXPOSURE_MODES_COMPILE_EXP 0x10 + +#define CPIA2_VP4_EXPOSURE_TARGET 0x16 // VP4 +#define CPIA2_VP5_EXPOSURE_TARGET 0x20 // VP5 + +#define CPIA2_VP_FLICKER_MODES 0x1B +#define CPIA2_VP_FLICKER_MODES_50HZ 0x80 +#define CPIA2_VP_FLICKER_MODES_CUSTOM_FLT_FFREQ 0x40 +#define CPIA2_VP_FLICKER_MODES_NEVER_FLICKER 0x20 +#define CPIA2_VP_FLICKER_MODES_INHIBIT_RUB 0x10 +#define CPIA2_VP_FLICKER_MODES_ADJUST_LINE_FREQ 0x08 +#define CPIA2_VP_FLICKER_MODES_CUSTOM_INT_FFREQ 0x04 + +#define CPIA2_VP_UMISC 0x1D +#define CPIA2_VP_UMISC_FORCE_MONO 0x80 +#define CPIA2_VP_UMISC_FORCE_ID_MASK 0x40 +#define CPIA2_VP_UMISC_INHIBIT_AUTO_FGS 0x20 +#define CPIA2_VP_UMISC_INHIBIT_AUTO_DIMS 0x08 +#define CPIA2_VP_UMISC_OPT_FOR_SENSOR_DS 0x04 +#define CPIA2_VP_UMISC_INHIBIT_AUTO_MODE_INT 0x02 + +#define CPIA2_VP5_ANTIFLKRSETUP 0x22 //34 + +#define CPIA2_VP_INTERPOLATION 0x24 +#define CPIA2_VP_INTERPOLATION_EVEN_FIRST 0x40 +#define CPIA2_VP_INTERPOLATION_HJOG 0x20 +#define CPIA2_VP_INTERPOLATION_VJOG 0x10 + +#define CPIA2_VP_GAMMA 0x25 +#define CPIA2_VP_DEFAULT_GAMMA 0x10 + +#define CPIA2_VP_YRANGE 0x26 + +#define CPIA2_VP_SATURATION 0x27 + +#define CPIA2_VP5_MYBLACK_LEVEL 0x3A //58 +#define CPIA2_VP5_MCYRANGE 0x3B //59 +#define CPIA2_VP5_MYCEILING 0x3C //60 +#define CPIA2_VP5_MCUVSATURATION 0x3D //61 + + +#define CPIA2_VP_REHASH_VALUES 0x60 + + +/*** + * Common sensor registers + ***/ +#define CPIA2_SENSOR_DEVICE_H 0x00 +#define CPIA2_SENSOR_DEVICE_L 0x01 + +#define CPIA2_SENSOR_DATA_FORMAT 0x16 +#define CPIA2_SENSOR_DATA_FORMAT_HMIRROR 0x08 +#define CPIA2_SENSOR_DATA_FORMAT_VMIRROR 0x10 + +#define CPIA2_SENSOR_CR1 0x76 +#define CPIA2_SENSOR_CR1_STAND_BY 0x01 +#define CPIA2_SENSOR_CR1_DOWN_RAMP_GEN 0x02 +#define CPIA2_SENSOR_CR1_DOWN_COLUMN_ADC 0x04 +#define CPIA2_SENSOR_CR1_DOWN_CAB_REGULATOR 0x08 +#define CPIA2_SENSOR_CR1_DOWN_AUDIO_REGULATOR 0x10 +#define CPIA2_SENSOR_CR1_DOWN_VRT_AMP 0x20 +#define CPIA2_SENSOR_CR1_DOWN_BAND_GAP 0x40 + +#endif diff --git a/drivers/media/video/cpia2/cpia2_usb.c b/drivers/media/video/cpia2/cpia2_usb.c new file mode 100644 index 000000000000..f4da02941493 --- /dev/null +++ b/drivers/media/video/cpia2/cpia2_usb.c @@ -0,0 +1,907 @@ +/**************************************************************************** + * + * Filename: cpia2_usb.c + * + * Copyright 2001, STMicrolectronics, Inc. + * Contact: steve.miller@st.com + * + * Description: + * This is a USB driver for CPia2 based video cameras. + * The infrastructure of this driver is based on the cpia usb driver by + * Jochen Scharrlach and Johannes Erdfeldt. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Stripped of 2.4 stuff ready for main kernel submit by + * Alan Cox <alan@redhat.com> + ****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include "cpia2.h" + +static int frame_sizes[] = { + 0, // USBIF_CMDONLY + 0, // USBIF_BULK + 128, // USBIF_ISO_1 + 384, // USBIF_ISO_2 + 640, // USBIF_ISO_3 + 768, // USBIF_ISO_4 + 896, // USBIF_ISO_5 + 1023, // USBIF_ISO_6 +}; + +#define FRAMES_PER_DESC 10 +#define FRAME_SIZE_PER_DESC frame_sizes[cam->cur_alt] + +static void process_frame(struct camera_data *cam); +static void cpia2_usb_complete(struct urb *urb, struct pt_regs *); +static int cpia2_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void cpia2_usb_disconnect(struct usb_interface *intf); + +static void free_sbufs(struct camera_data *cam); +static void add_APPn(struct camera_data *cam); +static void add_COM(struct camera_data *cam); +static int submit_urbs(struct camera_data *cam); +static int set_alternate(struct camera_data *cam, unsigned int alt); +static int configure_transfer_mode(struct camera_data *cam, unsigned int alt); + +static struct usb_device_id cpia2_id_table[] = { + {USB_DEVICE(0x0553, 0x0100)}, + {USB_DEVICE(0x0553, 0x0140)}, + {USB_DEVICE(0x0553, 0x0151)}, /* STV0676 */ + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, cpia2_id_table); + +static struct usb_driver cpia2_driver = { + .name = "cpia2", + .probe = cpia2_usb_probe, + .disconnect = cpia2_usb_disconnect, + .id_table = cpia2_id_table +}; + + +/****************************************************************************** + * + * process_frame + * + *****************************************************************************/ +static void process_frame(struct camera_data *cam) +{ + static int frame_count = 0; + + unsigned char *inbuff = cam->workbuff->data; + + DBG("Processing frame #%d, current:%d\n", + cam->workbuff->num, cam->curbuff->num); + + if(cam->workbuff->length > cam->workbuff->max_length) + cam->workbuff->max_length = cam->workbuff->length; + + if ((inbuff[0] == 0xFF) && (inbuff[1] == 0xD8)) { + frame_count++; + } else { + cam->workbuff->status = FRAME_ERROR; + DBG("Start of frame not found\n"); + return; + } + + /*** + * Now the output buffer should have a JPEG image in it. + ***/ + if(!cam->first_image_seen) { + /* Always skip the first image after streaming + * starts. It is almost certainly corrupt. */ + cam->first_image_seen = 1; + cam->workbuff->status = FRAME_EMPTY; + return; + } + if (cam->workbuff->length > 3) { + if(cam->mmapped && + cam->workbuff->length < cam->workbuff->max_length) { + /* No junk in the buffers */ + memset(cam->workbuff->data+cam->workbuff->length, + 0, cam->workbuff->max_length- + cam->workbuff->length); + } + cam->workbuff->max_length = cam->workbuff->length; + cam->workbuff->status = FRAME_READY; + + if(!cam->mmapped && cam->num_frames > 2) { + /* During normal reading, the most recent + * frame will be read. If the current frame + * hasn't started reading yet, it will never + * be read, so mark it empty. If the buffer is + * mmapped, or we have few buffers, we need to + * wait for the user to free the buffer. + * + * NOTE: This is not entirely foolproof with 3 + * buffers, but it would take an EXTREMELY + * overloaded system to cause problems (possible + * image data corruption). Basically, it would + * need to take more time to execute cpia2_read + * than it would for the camera to send + * cam->num_frames-2 frames before problems + * could occur. + */ + cam->curbuff->status = FRAME_EMPTY; + } + cam->curbuff = cam->workbuff; + cam->workbuff = cam->workbuff->next; + DBG("Changed buffers, work:%d, current:%d\n", + cam->workbuff->num, cam->curbuff->num); + return; + } else { + DBG("Not enough data for an image.\n"); + } + + cam->workbuff->status = FRAME_ERROR; + return; +} + +/****************************************************************************** + * + * add_APPn + * + * Adds a user specified APPn record + *****************************************************************************/ +static void add_APPn(struct camera_data *cam) +{ + if(cam->APP_len > 0) { + cam->workbuff->data[cam->workbuff->length++] = 0xFF; + cam->workbuff->data[cam->workbuff->length++] = 0xE0+cam->APPn; + cam->workbuff->data[cam->workbuff->length++] = 0; + cam->workbuff->data[cam->workbuff->length++] = cam->APP_len+2; + memcpy(cam->workbuff->data+cam->workbuff->length, + cam->APP_data, cam->APP_len); + cam->workbuff->length += cam->APP_len; + } +} + +/****************************************************************************** + * + * add_COM + * + * Adds a user specified COM record + *****************************************************************************/ +static void add_COM(struct camera_data *cam) +{ + if(cam->COM_len > 0) { + cam->workbuff->data[cam->workbuff->length++] = 0xFF; + cam->workbuff->data[cam->workbuff->length++] = 0xFE; + cam->workbuff->data[cam->workbuff->length++] = 0; + cam->workbuff->data[cam->workbuff->length++] = cam->COM_len+2; + memcpy(cam->workbuff->data+cam->workbuff->length, + cam->COM_data, cam->COM_len); + cam->workbuff->length += cam->COM_len; + } +} + +/****************************************************************************** + * + * cpia2_usb_complete + * + * callback when incoming packet is received + *****************************************************************************/ +static void cpia2_usb_complete(struct urb *urb, struct pt_regs *regs) +{ + int i; + unsigned char *cdata; + static int frame_ready = false; + struct camera_data *cam = (struct camera_data *) urb->context; + + if (urb->status!=0) { + if (!(urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN)) + { + DBG("urb->status = %d!\n", urb->status); + } + DBG("Stopping streaming\n"); + return; + } + + if (!cam->streaming || !cam->present || cam->open_count == 0) { + LOG("Will now stop the streaming: streaming = %d, " + "present=%d, open_count=%d\n", + cam->streaming, cam->present, cam->open_count); + return; + } + + /*** + * Packet collater + ***/ + //DBG("Collating %d packets\n", urb->number_of_packets); + for (i = 0; i < urb->number_of_packets; i++) { + u16 checksum, iso_checksum; + int j; + int n = urb->iso_frame_desc[i].actual_length; + int st = urb->iso_frame_desc[i].status; + + if(cam->workbuff->status == FRAME_READY) { + struct framebuf *ptr; + /* Try to find an available buffer */ + DBG("workbuff full, searching\n"); + for (ptr = cam->workbuff->next; + ptr != cam->workbuff; + ptr = ptr->next) + { + if (ptr->status == FRAME_EMPTY) { + ptr->status = FRAME_READING; + ptr->length = 0; + break; + } + } + if (ptr == cam->workbuff) + break; /* No READING or EMPTY buffers left */ + + cam->workbuff = ptr; + } + + if (cam->workbuff->status == FRAME_EMPTY || + cam->workbuff->status == FRAME_ERROR) { + cam->workbuff->status = FRAME_READING; + cam->workbuff->length = 0; + } + + //DBG(" Packet %d length = %d, status = %d\n", i, n, st); + cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + if (st) { + LOG("cpia2 data error: [%d] len=%d, status = %d\n", + i, n, st); + if(!ALLOW_CORRUPT) + cam->workbuff->status = FRAME_ERROR; + continue; + } + + if(n<=2) + continue; + + checksum = 0; + for(j=0; j<n-2; ++j) + checksum += cdata[j]; + iso_checksum = cdata[j] + cdata[j+1]*256; + if(checksum != iso_checksum) { + LOG("checksum mismatch: [%d] len=%d, calculated = %x, checksum = %x\n", + i, n, (int)checksum, (int)iso_checksum); + if(!ALLOW_CORRUPT) { + cam->workbuff->status = FRAME_ERROR; + continue; + } + } + n -= 2; + + if(cam->workbuff->status != FRAME_READING) { + if((0xFF == cdata[0] && 0xD8 == cdata[1]) || + (0xD8 == cdata[0] && 0xFF == cdata[1] && + 0 != cdata[2])) { + /* frame is skipped, but increment total + * frame count anyway */ + cam->frame_count++; + } + DBG("workbuff not reading, status=%d\n", + cam->workbuff->status); + continue; + } + + if (cam->frame_size < cam->workbuff->length + n) { + ERR("buffer overflow! length: %d, n: %d\n", + cam->workbuff->length, n); + cam->workbuff->status = FRAME_ERROR; + if(cam->workbuff->length > cam->workbuff->max_length) + cam->workbuff->max_length = + cam->workbuff->length; + continue; + } + + if (cam->workbuff->length == 0) { + int data_offset; + if ((0xD8 == cdata[0]) && (0xFF == cdata[1])) { + data_offset = 1; + } else if((0xFF == cdata[0]) && (0xD8 == cdata[1]) + && (0xFF == cdata[2])) { + data_offset = 2; + } else { + DBG("Ignoring packet, not beginning!\n"); + continue; + } + DBG("Start of frame pattern found\n"); + do_gettimeofday(&cam->workbuff->timestamp); + cam->workbuff->seq = cam->frame_count++; + cam->workbuff->data[0] = 0xFF; + cam->workbuff->data[1] = 0xD8; + cam->workbuff->length = 2; + add_APPn(cam); + add_COM(cam); + memcpy(cam->workbuff->data+cam->workbuff->length, + cdata+data_offset, n-data_offset); + cam->workbuff->length += n-data_offset; + } else if (cam->workbuff->length > 0) { + memcpy(cam->workbuff->data + cam->workbuff->length, + cdata, n); + cam->workbuff->length += n; + } + + if ((cam->workbuff->length >= 3) && + (cam->workbuff->data[cam->workbuff->length - 3] == 0xFF) && + (cam->workbuff->data[cam->workbuff->length - 2] == 0xD9) && + (cam->workbuff->data[cam->workbuff->length - 1] == 0xFF)) { + frame_ready = true; + cam->workbuff->data[cam->workbuff->length - 1] = 0; + cam->workbuff->length -= 1; + } else if ((cam->workbuff->length >= 2) && + (cam->workbuff->data[cam->workbuff->length - 2] == 0xFF) && + (cam->workbuff->data[cam->workbuff->length - 1] == 0xD9)) { + frame_ready = true; + } + + if (frame_ready) { + DBG("Workbuff image size = %d\n",cam->workbuff->length); + process_frame(cam); + + frame_ready = false; + + if (waitqueue_active(&cam->wq_stream)) + wake_up_interruptible(&cam->wq_stream); + } + } + + if(cam->streaming) { + /* resubmit */ + urb->dev = cam->dev; + if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0) + ERR("%s: usb_submit_urb ret %d!\n", __func__, i); + } +} + +/****************************************************************************** + * + * configure_transfer_mode + * + *****************************************************************************/ +static int configure_transfer_mode(struct camera_data *cam, unsigned int alt) +{ + static unsigned char iso_regs[8][4] = { + {0x00, 0x00, 0x00, 0x00}, + {0x00, 0x00, 0x00, 0x00}, + {0xB9, 0x00, 0x00, 0x7E}, + {0xB9, 0x00, 0x01, 0x7E}, + {0xB9, 0x00, 0x02, 0x7E}, + {0xB9, 0x00, 0x02, 0xFE}, + {0xB9, 0x00, 0x03, 0x7E}, + {0xB9, 0x00, 0x03, 0xFD} + }; + struct cpia2_command cmd; + unsigned char reg; + + if(!cam->present) + return -ENODEV; + + /*** + * Write the isoc registers according to the alternate selected + ***/ + cmd.direction = TRANSFER_WRITE; + cmd.buffer.block_data[0] = iso_regs[alt][0]; + cmd.buffer.block_data[1] = iso_regs[alt][1]; + cmd.buffer.block_data[2] = iso_regs[alt][2]; + cmd.buffer.block_data[3] = iso_regs[alt][3]; + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.start = CPIA2_VC_USB_ISOLIM; + cmd.reg_count = 4; + cpia2_send_command(cam, &cmd); + + /*** + * Enable relevant streams before starting polling. + * First read USB Stream Config Register. + ***/ + cmd.direction = TRANSFER_READ; + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cmd.start = CPIA2_VC_USB_STRM; + cmd.reg_count = 1; + cpia2_send_command(cam, &cmd); + reg = cmd.buffer.block_data[0]; + + /* Clear iso, bulk, and int */ + reg &= ~(CPIA2_VC_USB_STRM_BLK_ENABLE | + CPIA2_VC_USB_STRM_ISO_ENABLE | + CPIA2_VC_USB_STRM_INT_ENABLE); + + if (alt == USBIF_BULK) { + DBG("Enabling bulk xfer\n"); + reg |= CPIA2_VC_USB_STRM_BLK_ENABLE; /* Enable Bulk */ + cam->xfer_mode = XFER_BULK; + } else if (alt >= USBIF_ISO_1) { + DBG("Enabling ISOC xfer\n"); + reg |= CPIA2_VC_USB_STRM_ISO_ENABLE; + cam->xfer_mode = XFER_ISOC; + } + + cmd.buffer.block_data[0] = reg; + cmd.direction = TRANSFER_WRITE; + cmd.start = CPIA2_VC_USB_STRM; + cmd.reg_count = 1; + cmd.req_mode = CAMERAACCESS_TYPE_BLOCK | CAMERAACCESS_VC; + cpia2_send_command(cam, &cmd); + + return 0; +} + +/****************************************************************************** + * + * cpia2_usb_change_streaming_alternate + * + *****************************************************************************/ +int cpia2_usb_change_streaming_alternate(struct camera_data *cam, + unsigned int alt) +{ + int ret = 0; + + if(alt < USBIF_ISO_1 || alt > USBIF_ISO_6) + return -EINVAL; + + if(alt == cam->params.camera_state.stream_mode) + return 0; + + cpia2_usb_stream_pause(cam); + + configure_transfer_mode(cam, alt); + + cam->params.camera_state.stream_mode = alt; + + /* Reset the camera to prevent image quality degradation */ + cpia2_reset_camera(cam); + + cpia2_usb_stream_resume(cam); + + return ret; +} + +/****************************************************************************** + * + * set_alternate + * + *****************************************************************************/ +int set_alternate(struct camera_data *cam, unsigned int alt) +{ + int ret = 0; + + if(alt == cam->cur_alt) + return 0; + + if (cam->cur_alt != USBIF_CMDONLY) { + DBG("Changing from alt %d to %d\n", cam->cur_alt, USBIF_CMDONLY); + ret = usb_set_interface(cam->dev, cam->iface, USBIF_CMDONLY); + if (ret != 0) + return ret; + } + if (alt != USBIF_CMDONLY) { + DBG("Changing from alt %d to %d\n", USBIF_CMDONLY, alt); + ret = usb_set_interface(cam->dev, cam->iface, alt); + if (ret != 0) + return ret; + } + + cam->old_alt = cam->cur_alt; + cam->cur_alt = alt; + + return ret; +} + +/****************************************************************************** + * + * free_sbufs + * + * Free all cam->sbuf[]. All non-NULL .data and .urb members that are non-NULL + * are assumed to be allocated. Non-NULL .urb members are also assumed to be + * submitted (and must therefore be killed before they are freed). + *****************************************************************************/ +static void free_sbufs(struct camera_data *cam) +{ + int i; + + for (i = 0; i < NUM_SBUF; i++) { + if(cam->sbuf[i].urb) { + usb_kill_urb(cam->sbuf[i].urb); + usb_free_urb(cam->sbuf[i].urb); + cam->sbuf[i].urb = NULL; + } + if(cam->sbuf[i].data) { + kfree(cam->sbuf[i].data); + cam->sbuf[i].data = NULL; + } + } +} + +/******* +* Convenience functions +*******/ +/**************************************************************************** + * + * write_packet + * + ***************************************************************************/ +static int write_packet(struct usb_device *udev, + u8 request, u8 * registers, u16 start, size_t size) +{ + if (!registers || size <= 0) + return -EINVAL; + + return usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + request, + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + start, /* value */ + 0, /* index */ + registers, /* buffer */ + size, + HZ); +} + +/**************************************************************************** + * + * read_packet + * + ***************************************************************************/ +static int read_packet(struct usb_device *udev, + u8 request, u8 * registers, u16 start, size_t size) +{ + if (!registers || size <= 0) + return -EINVAL; + + return usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + request, + USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE, + start, /* value */ + 0, /* index */ + registers, /* buffer */ + size, + HZ); +} + +/****************************************************************************** + * + * cpia2_usb_transfer_cmd + * + *****************************************************************************/ +int cpia2_usb_transfer_cmd(struct camera_data *cam, + void *registers, + u8 request, u8 start, u8 count, u8 direction) +{ + int err = 0; + struct usb_device *udev = cam->dev; + + if (!udev) { + ERR("%s: Internal driver error: udev is NULL\n", __func__); + return -EINVAL; + } + + if (!registers) { + ERR("%s: Internal driver error: register array is NULL\n", __func__); + return -EINVAL; + } + + if (direction == TRANSFER_READ) { + err = read_packet(udev, request, (u8 *)registers, start, count); + if (err > 0) + err = 0; + } else if (direction == TRANSFER_WRITE) { + err =write_packet(udev, request, (u8 *)registers, start, count); + if (err < 0) { + LOG("Control message failed, err val = %d\n", err); + LOG("Message: request = 0x%0X, start = 0x%0X\n", + request, start); + LOG("Message: count = %d, register[0] = 0x%0X\n", + count, ((unsigned char *) registers)[0]); + } else + err=0; + } else { + LOG("Unexpected first byte of direction: %d\n", + direction); + return -EINVAL; + } + + if(err != 0) + LOG("Unexpected error: %d\n", err); + return err; +} + + +/****************************************************************************** + * + * submit_urbs + * + *****************************************************************************/ +static int submit_urbs(struct camera_data *cam) +{ + struct urb *urb; + int fx, err, i; + + for(i=0; i<NUM_SBUF; ++i) { + if (cam->sbuf[i].data) + continue; + cam->sbuf[i].data = + kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL); + if (!cam->sbuf[i].data) { + return -ENOMEM; + } + } + + /* We double buffer the Isoc lists, and also know the polling + * interval is every frame (1 == (1 << (bInterval -1))). + */ + for(i=0; i<NUM_SBUF; ++i) { + if(cam->sbuf[i].urb) { + continue; + } + urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); + if (!urb) { + return -ENOMEM; + } + + cam->sbuf[i].urb = urb; + urb->dev = cam->dev; + urb->context = cam; + urb->pipe = usb_rcvisocpipe(cam->dev, 1 /*ISOC endpoint*/); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = cam->sbuf[i].data; + urb->complete = cpia2_usb_complete; + urb->number_of_packets = FRAMES_PER_DESC; + urb->interval = 1; + urb->transfer_buffer_length = + FRAME_SIZE_PER_DESC * FRAMES_PER_DESC; + + for (fx = 0; fx < FRAMES_PER_DESC; fx++) { + urb->iso_frame_desc[fx].offset = + FRAME_SIZE_PER_DESC * fx; + urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC; + } + } + + + /* Queue the ISO urbs, and resubmit in the completion handler */ + for(i=0; i<NUM_SBUF; ++i) { + err = usb_submit_urb(cam->sbuf[i].urb, GFP_KERNEL); + if (err) { + ERR("usb_submit_urb[%d]() = %d\n", i, err); + return err; + } + } + + return 0; +} + +/****************************************************************************** + * + * cpia2_usb_stream_start + * + *****************************************************************************/ +int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate) +{ + int ret; + int old_alt; + + if(cam->streaming) + return 0; + + if (cam->flush) { + int i; + DBG("Flushing buffers\n"); + for(i=0; i<cam->num_frames; ++i) { + cam->buffers[i].status = FRAME_EMPTY; + cam->buffers[i].length = 0; + } + cam->curbuff = &cam->buffers[0]; + cam->workbuff = cam->curbuff->next; + cam->flush = false; + } + + old_alt = cam->params.camera_state.stream_mode; + cam->params.camera_state.stream_mode = 0; + ret = cpia2_usb_change_streaming_alternate(cam, alternate); + if (ret < 0) { + int ret2; + ERR("cpia2_usb_change_streaming_alternate() = %d!\n", ret); + cam->params.camera_state.stream_mode = old_alt; + ret2 = set_alternate(cam, USBIF_CMDONLY); + if (ret2 < 0) { + ERR("cpia2_usb_change_streaming_alternate(%d) =%d has already " + "failed. Then tried to call " + "set_alternate(USBIF_CMDONLY) = %d.\n", + alternate, ret, ret2); + } + } else { + cam->frame_count = 0; + cam->streaming = 1; + ret = cpia2_usb_stream_resume(cam); + } + return ret; +} + +/****************************************************************************** + * + * cpia2_usb_stream_pause + * + *****************************************************************************/ +int cpia2_usb_stream_pause(struct camera_data *cam) +{ + int ret = 0; + if(cam->streaming) { + ret = set_alternate(cam, USBIF_CMDONLY); + free_sbufs(cam); + } + return ret; +} + +/****************************************************************************** + * + * cpia2_usb_stream_resume + * + *****************************************************************************/ +int cpia2_usb_stream_resume(struct camera_data *cam) +{ + int ret = 0; + if(cam->streaming) { + cam->first_image_seen = 0; + ret = set_alternate(cam, cam->params.camera_state.stream_mode); + if(ret == 0) { + ret = submit_urbs(cam); + } + } + return ret; +} + +/****************************************************************************** + * + * cpia2_usb_stream_stop + * + *****************************************************************************/ +int cpia2_usb_stream_stop(struct camera_data *cam) +{ + int ret; + ret = cpia2_usb_stream_pause(cam); + cam->streaming = 0; + configure_transfer_mode(cam, 0); + return ret; +} + +/****************************************************************************** + * + * cpia2_usb_probe + * + * Probe and initialize. + *****************************************************************************/ +static int cpia2_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_interface_descriptor *interface; + struct camera_data *cam; + int ret; + + /* A multi-config CPiA2 camera? */ + if (udev->descriptor.bNumConfigurations != 1) + return -ENODEV; + interface = &intf->cur_altsetting->desc; + + /* If we get to this point, we found a CPiA2 camera */ + LOG("CPiA2 USB camera found\n"); + + if((cam = cpia2_init_camera_struct()) == NULL) + return -ENOMEM; + + cam->dev = udev; + cam->iface = interface->bInterfaceNumber; + + ret = set_alternate(cam, USBIF_CMDONLY); + if (ret < 0) { + ERR("%s: usb_set_interface error (ret = %d)\n", __func__, ret); + kfree(cam); + return ret; + } + + if ((ret = cpia2_register_camera(cam)) < 0) { + ERR("%s: Failed to register cpia2 camera (ret = %d)\n", __func__, ret); + kfree(cam); + return ret; + } + + + if((ret = cpia2_init_camera(cam)) < 0) { + ERR("%s: failed to initialize cpia2 camera (ret = %d)\n", __func__, ret); + cpia2_unregister_camera(cam); + kfree(cam); + return ret; + } + LOG(" CPiA Version: %d.%02d (%d.%d)\n", + cam->params.version.firmware_revision_hi, + cam->params.version.firmware_revision_lo, + cam->params.version.asic_id, + cam->params.version.asic_rev); + LOG(" CPiA PnP-ID: %04x:%04x:%04x\n", + cam->params.pnp_id.vendor, + cam->params.pnp_id.product, + cam->params.pnp_id.device_revision); + LOG(" SensorID: %d.(version %d)\n", + cam->params.version.sensor_flags, + cam->params.version.sensor_rev); + + usb_set_intfdata(intf, cam); + + return 0; +} + +/****************************************************************************** + * + * cpia2_disconnect + * + *****************************************************************************/ +static void cpia2_usb_disconnect(struct usb_interface *intf) +{ + struct camera_data *cam = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + cam->present = 0; + + DBG("Stopping stream\n"); + cpia2_usb_stream_stop(cam); + + DBG("Unregistering camera\n"); + cpia2_unregister_camera(cam); + + if(cam->buffers) { + DBG("Wakeup waiting processes\n"); + cam->curbuff->status = FRAME_READY; + cam->curbuff->length = 0; + if (waitqueue_active(&cam->wq_stream)) + wake_up_interruptible(&cam->wq_stream); + } + + DBG("Releasing interface\n"); + usb_driver_release_interface(&cpia2_driver, intf); + + if (cam->open_count == 0) { + DBG("Freeing camera structure\n"); + kfree(cam); + } + + LOG("CPiA2 camera disconnected.\n"); +} + + +/****************************************************************************** + * + * usb_cpia2_init + * + *****************************************************************************/ +int cpia2_usb_init(void) +{ + return usb_register(&cpia2_driver); +} + +/****************************************************************************** + * + * usb_cpia_cleanup + * + *****************************************************************************/ +void cpia2_usb_cleanup(void) +{ + schedule_timeout(2 * HZ); + usb_deregister(&cpia2_driver); +} diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c new file mode 100644 index 000000000000..481e178ef56d --- /dev/null +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -0,0 +1,2080 @@ +/**************************************************************************** + * + * Filename: cpia2_v4l.c + * + * Copyright 2001, STMicrolectronics, Inc. + * Contact: steve.miller@st.com + * Copyright 2001,2005, Scott J. Bertin <scottbertin@yahoo.com> + * + * Description: + * This is a USB driver for CPia2 based video cameras. + * The infrastructure of this driver is based on the cpia usb driver by + * Jochen Scharrlach and Johannes Erdfeldt. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Stripped of 2.4 stuff ready for main kernel submit by + * Alan Cox <alan@redhat.com> + ****************************************************************************/ + +#include <linux/version.h> + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/time.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/moduleparam.h> + +#include "cpia2.h" +#include "cpia2dev.h" + + +//#define _CPIA2_DEBUG_ + +#define MAKE_STRING_1(x) #x +#define MAKE_STRING(x) MAKE_STRING_1(x) + +static int video_nr = -1; +module_param(video_nr, int, 0); +MODULE_PARM_DESC(video_nr,"video device to register (0=/dev/video0, etc)"); + +static int buffer_size = 68*1024; +module_param(buffer_size, int, 0); +MODULE_PARM_DESC(buffer_size, "Size for each frame buffer in bytes (default 68k)"); + +static int num_buffers = 3; +module_param(num_buffers, int, 0); +MODULE_PARM_DESC(num_buffers, "Number of frame buffers (1-" + MAKE_STRING(VIDEO_MAX_FRAME) ", default 3)"); + +static int alternate = DEFAULT_ALT; +module_param(alternate, int, 0); +MODULE_PARM_DESC(alternate, "USB Alternate (" MAKE_STRING(USBIF_ISO_1) "-" + MAKE_STRING(USBIF_ISO_6) ", default " + MAKE_STRING(DEFAULT_ALT) ")"); + +static int flicker_freq = 60; +module_param(flicker_freq, int, 0); +MODULE_PARM_DESC(flicker_freq, "Flicker frequency (" MAKE_STRING(50) "or" + MAKE_STRING(60) ", default " + MAKE_STRING(60) ")"); + +static int flicker_mode = NEVER_FLICKER; +module_param(flicker_mode, int, 0); +MODULE_PARM_DESC(flicker_mode, + "Flicker supression (" MAKE_STRING(NEVER_FLICKER) "or" + MAKE_STRING(ANTI_FLICKER_ON) ", default " + MAKE_STRING(NEVER_FLICKER) ")"); + +MODULE_AUTHOR("Steve Miller (STMicroelectronics) <steve.miller@st.com>"); +MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras"); +MODULE_SUPPORTED_DEVICE("video"); +MODULE_LICENSE("GPL"); + +#define ABOUT "V4L-Driver for Vision CPiA2 based cameras" + +#ifndef VID_HARDWARE_CPIA2 +#error "VID_HARDWARE_CPIA2 should have been defined in linux/videodev.h" +#endif + +struct control_menu_info { + int value; + char name[32]; +}; + +static struct control_menu_info framerate_controls[] = +{ + { CPIA2_VP_FRAMERATE_6_25, "6.25 fps" }, + { CPIA2_VP_FRAMERATE_7_5, "7.5 fps" }, + { CPIA2_VP_FRAMERATE_12_5, "12.5 fps" }, + { CPIA2_VP_FRAMERATE_15, "15 fps" }, + { CPIA2_VP_FRAMERATE_25, "25 fps" }, + { CPIA2_VP_FRAMERATE_30, "30 fps" }, +}; +#define NUM_FRAMERATE_CONTROLS (sizeof(framerate_controls)/sizeof(framerate_controls[0])) + +static struct control_menu_info flicker_controls[] = +{ + { NEVER_FLICKER, "Off" }, + { FLICKER_50, "50 Hz" }, + { FLICKER_60, "60 Hz" }, +}; +#define NUM_FLICKER_CONTROLS (sizeof(flicker_controls)/sizeof(flicker_controls[0])) + +static struct control_menu_info lights_controls[] = +{ + { 0, "Off" }, + { 64, "Top" }, + { 128, "Bottom" }, + { 192, "Both" }, +}; +#define NUM_LIGHTS_CONTROLS (sizeof(lights_controls)/sizeof(lights_controls[0])) +#define GPIO_LIGHTS_MASK 192 + +static struct v4l2_queryctrl controls[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = DEFAULT_BRIGHTNESS, + }, + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = DEFAULT_CONTRAST, + }, + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = DEFAULT_SATURATION, + }, + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror Horizontally", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Flip Vertically", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = CPIA2_CID_TARGET_KB, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Target KB", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = DEFAULT_TARGET_KB, + }, + { + .id = CPIA2_CID_GPIO, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "GPIO", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 0, + }, + { + .id = CPIA2_CID_FLICKER_MODE, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Flicker Reduction", + .minimum = 0, + .maximum = NUM_FLICKER_CONTROLS-1, + .step = 1, + .default_value = 0, + }, + { + .id = CPIA2_CID_FRAMERATE, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Framerate", + .minimum = 0, + .maximum = NUM_FRAMERATE_CONTROLS-1, + .step = 1, + .default_value = NUM_FRAMERATE_CONTROLS-1, + }, + { + .id = CPIA2_CID_USB_ALT, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "USB Alternate", + .minimum = USBIF_ISO_1, + .maximum = USBIF_ISO_6, + .step = 1, + .default_value = DEFAULT_ALT, + }, + { + .id = CPIA2_CID_LIGHTS, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Lights", + .minimum = 0, + .maximum = NUM_LIGHTS_CONTROLS-1, + .step = 1, + .default_value = 0, + }, + { + .id = CPIA2_CID_RESET_CAMERA, + .type = V4L2_CTRL_TYPE_BUTTON, + .name = "Reset Camera", + .minimum = 0, + .maximum = 0, + .step = 0, + .default_value = 0, + }, +}; +#define NUM_CONTROLS (sizeof(controls)/sizeof(controls[0])) + + +/****************************************************************************** + * + * cpia2_open + * + *****************************************************************************/ +static int cpia2_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct camera_data *cam = video_get_drvdata(dev); + int retval = 0; + + if (!cam) { + ERR("Internal error, camera_data not found!\n"); + return -ENODEV; + } + + if(mutex_lock_interruptible(&cam->busy_lock)) + return -ERESTARTSYS; + + if(!cam->present) { + retval = -ENODEV; + goto err_return; + } + + if (cam->open_count > 0) { + goto skip_init; + } + + if (cpia2_allocate_buffers(cam)) { + retval = -ENOMEM; + goto err_return; + } + + /* reset the camera */ + if (cpia2_reset_camera(cam) < 0) { + retval = -EIO; + goto err_return; + } + + cam->APP_len = 0; + cam->COM_len = 0; + +skip_init: + { + struct cpia2_fh *fh = kmalloc(sizeof(*fh),GFP_KERNEL); + if(!fh) { + retval = -ENOMEM; + goto err_return; + } + file->private_data = fh; + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&cam->prio, &fh->prio); + fh->mmapped = 0; + } + + ++cam->open_count; + + cpia2_dbg_dump_registers(cam); + +err_return: + mutex_unlock(&cam->busy_lock); + return retval; +} + +/****************************************************************************** + * + * cpia2_close + * + *****************************************************************************/ +static int cpia2_close(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct camera_data *cam = video_get_drvdata(dev); + struct cpia2_fh *fh = file->private_data; + + mutex_lock(&cam->busy_lock); + + if (cam->present && + (cam->open_count == 1 + || fh->prio == V4L2_PRIORITY_RECORD + )) { + cpia2_usb_stream_stop(cam); + + if(cam->open_count == 1) { + /* save camera state for later open */ + cpia2_save_camera_state(cam); + + cpia2_set_low_power(cam); + cpia2_free_buffers(cam); + } + } + + { + if(fh->mmapped) + cam->mmapped = 0; + v4l2_prio_close(&cam->prio,&fh->prio); + file->private_data = NULL; + kfree(fh); + } + + if (--cam->open_count == 0) { + cpia2_free_buffers(cam); + if (!cam->present) { + video_unregister_device(dev); + kfree(cam); + } + } + + mutex_unlock(&cam->busy_lock); + + return 0; +} + +/****************************************************************************** + * + * cpia2_v4l_read + * + *****************************************************************************/ +static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count, + loff_t *off) +{ + struct video_device *dev = video_devdata(file); + struct camera_data *cam = video_get_drvdata(dev); + int noblock = file->f_flags&O_NONBLOCK; + + struct cpia2_fh *fh = file->private_data; + + if(!cam) + return -EINVAL; + + /* Priority check */ + if(fh->prio != V4L2_PRIORITY_RECORD) { + return -EBUSY; + } + + return cpia2_read(cam, buf, count, noblock); +} + + +/****************************************************************************** + * + * cpia2_v4l_poll + * + *****************************************************************************/ +static unsigned int cpia2_v4l_poll(struct file *filp, struct poll_table_struct *wait) +{ + struct video_device *dev = video_devdata(filp); + struct camera_data *cam = video_get_drvdata(dev); + + struct cpia2_fh *fh = filp->private_data; + + if(!cam) + return POLLERR; + + /* Priority check */ + if(fh->prio != V4L2_PRIORITY_RECORD) { + return POLLERR; + } + + return cpia2_poll(cam, filp, wait); +} + + +/****************************************************************************** + * + * ioctl_cap_query + * + *****************************************************************************/ +static int ioctl_cap_query(void *arg, struct camera_data *cam) +{ + struct video_capability *vc; + int retval = 0; + vc = arg; + + if (cam->params.pnp_id.product == 0x151) + strcpy(vc->name, "QX5 Microscope"); + else + strcpy(vc->name, "CPiA2 Camera"); + + vc->type = VID_TYPE_CAPTURE | VID_TYPE_MJPEG_ENCODER; + vc->channels = 1; + vc->audios = 0; + vc->minwidth = 176; /* VIDEOSIZE_QCIF */ + vc->minheight = 144; + switch (cam->params.version.sensor_flags) { + case CPIA2_VP_SENSOR_FLAGS_500: + vc->maxwidth = STV_IMAGE_VGA_COLS; + vc->maxheight = STV_IMAGE_VGA_ROWS; + break; + case CPIA2_VP_SENSOR_FLAGS_410: + vc->maxwidth = STV_IMAGE_CIF_COLS; + vc->maxheight = STV_IMAGE_CIF_ROWS; + break; + default: + return -EINVAL; + } + + return retval; +} + +/****************************************************************************** + * + * ioctl_get_channel + * + *****************************************************************************/ +static int ioctl_get_channel(void *arg) +{ + int retval = 0; + struct video_channel *v; + v = arg; + + if (v->channel != 0) + return -EINVAL; + + v->channel = 0; + strcpy(v->name, "Camera"); + v->tuners = 0; + v->flags = 0; + v->type = VIDEO_TYPE_CAMERA; + v->norm = 0; + + return retval; +} + +/****************************************************************************** + * + * ioctl_set_channel + * + *****************************************************************************/ +static int ioctl_set_channel(void *arg) +{ + struct video_channel *v; + int retval = 0; + v = arg; + + if (retval == 0 && v->channel != 0) + retval = -EINVAL; + + return retval; +} + +/****************************************************************************** + * + * ioctl_set_image_prop + * + *****************************************************************************/ +static int ioctl_set_image_prop(void *arg, struct camera_data *cam) +{ + struct video_picture *vp; + int retval = 0; + vp = arg; + + /* brightness, color, contrast need no check 0-65535 */ + memcpy(&cam->vp, vp, sizeof(*vp)); + + /* update cam->params.colorParams */ + cam->params.color_params.brightness = vp->brightness / 256; + cam->params.color_params.saturation = vp->colour / 256; + cam->params.color_params.contrast = vp->contrast / 256; + + DBG("Requested params: bright 0x%X, sat 0x%X, contrast 0x%X\n", + cam->params.color_params.brightness, + cam->params.color_params.saturation, + cam->params.color_params.contrast); + + cpia2_set_color_params(cam); + + return retval; +} + +static int sync(struct camera_data *cam, int frame_nr) +{ + struct framebuf *frame = &cam->buffers[frame_nr]; + + while (1) { + if (frame->status == FRAME_READY) + return 0; + + if (!cam->streaming) { + frame->status = FRAME_READY; + frame->length = 0; + return 0; + } + + mutex_unlock(&cam->busy_lock); + wait_event_interruptible(cam->wq_stream, + !cam->streaming || + frame->status == FRAME_READY); + mutex_lock(&cam->busy_lock); + if (signal_pending(current)) + return -ERESTARTSYS; + if(!cam->present) + return -ENOTTY; + } +} + +/****************************************************************************** + * + * ioctl_set_window_size + * + *****************************************************************************/ +static int ioctl_set_window_size(void *arg, struct camera_data *cam, + struct cpia2_fh *fh) +{ + /* copy_from_user, check validity, copy to internal structure */ + struct video_window *vw; + int frame, err; + vw = arg; + + if (vw->clipcount != 0) /* clipping not supported */ + return -EINVAL; + + if (vw->clips != NULL) /* clipping not supported */ + return -EINVAL; + + /* Ensure that only this process can change the format. */ + err = v4l2_prio_change(&cam->prio, &fh->prio, V4L2_PRIORITY_RECORD); + if(err != 0) + return err; + + cam->pixelformat = V4L2_PIX_FMT_JPEG; + + /* Be sure to supply the Huffman tables, this isn't MJPEG */ + cam->params.compression.inhibit_htables = 0; + + /* we set the video window to something smaller or equal to what + * is requested by the user??? + */ + DBG("Requested width = %d, height = %d\n", vw->width, vw->height); + if (vw->width != cam->vw.width || vw->height != cam->vw.height) { + cam->vw.width = vw->width; + cam->vw.height = vw->height; + cam->params.roi.width = vw->width; + cam->params.roi.height = vw->height; + cpia2_set_format(cam); + } + + for (frame = 0; frame < cam->num_frames; ++frame) { + if (cam->buffers[frame].status == FRAME_READING) + if ((err = sync(cam, frame)) < 0) + return err; + + cam->buffers[frame].status = FRAME_EMPTY; + } + + return 0; +} + +/****************************************************************************** + * + * ioctl_get_mbuf + * + *****************************************************************************/ +static int ioctl_get_mbuf(void *arg, struct camera_data *cam) +{ + struct video_mbuf *vm; + int i; + vm = arg; + + memset(vm, 0, sizeof(*vm)); + vm->size = cam->frame_size*cam->num_frames; + vm->frames = cam->num_frames; + for (i = 0; i < cam->num_frames; i++) + vm->offsets[i] = cam->frame_size * i; + + return 0; +} + +/****************************************************************************** + * + * ioctl_mcapture + * + *****************************************************************************/ +static int ioctl_mcapture(void *arg, struct camera_data *cam, + struct cpia2_fh *fh) +{ + struct video_mmap *vm; + int video_size, err; + vm = arg; + + if (vm->frame < 0 || vm->frame >= cam->num_frames) + return -EINVAL; + + /* set video size */ + video_size = cpia2_match_video_size(vm->width, vm->height); + if (cam->video_size < 0) { + return -EINVAL; + } + + /* Ensure that only this process can change the format. */ + err = v4l2_prio_change(&cam->prio, &fh->prio, V4L2_PRIORITY_RECORD); + if(err != 0) + return err; + + if (video_size != cam->video_size) { + cam->video_size = video_size; + cam->params.roi.width = vm->width; + cam->params.roi.height = vm->height; + cpia2_set_format(cam); + } + + if (cam->buffers[vm->frame].status == FRAME_READING) + if ((err=sync(cam, vm->frame)) < 0) + return err; + + cam->buffers[vm->frame].status = FRAME_EMPTY; + + return cpia2_usb_stream_start(cam,cam->params.camera_state.stream_mode); +} + +/****************************************************************************** + * + * ioctl_sync + * + *****************************************************************************/ +static int ioctl_sync(void *arg, struct camera_data *cam) +{ + int frame; + + frame = *(int*)arg; + + if (frame < 0 || frame >= cam->num_frames) + return -EINVAL; + + return sync(cam, frame); +} + + +/****************************************************************************** + * + * ioctl_set_gpio + * + *****************************************************************************/ + +static int ioctl_set_gpio(void *arg, struct camera_data *cam) +{ + __u32 gpio_val; + + gpio_val = *(__u32*) arg; + + if (gpio_val &~ 0xFFU) + return -EINVAL; + + return cpia2_set_gpio(cam, (unsigned char)gpio_val); +} + +/****************************************************************************** + * + * ioctl_querycap + * + * V4L2 device capabilities + * + *****************************************************************************/ + +static int ioctl_querycap(void *arg, struct camera_data *cam) +{ + struct v4l2_capability *vc = arg; + + memset(vc, 0, sizeof(*vc)); + strcpy(vc->driver, "cpia2"); + + if (cam->params.pnp_id.product == 0x151) + strcpy(vc->card, "QX5 Microscope"); + else + strcpy(vc->card, "CPiA2 Camera"); + switch (cam->params.pnp_id.device_type) { + case DEVICE_STV_672: + strcat(vc->card, " (672/"); + break; + case DEVICE_STV_676: + strcat(vc->card, " (676/"); + break; + default: + strcat(vc->card, " (???/"); + break; + } + switch (cam->params.version.sensor_flags) { + case CPIA2_VP_SENSOR_FLAGS_404: + strcat(vc->card, "404)"); + break; + case CPIA2_VP_SENSOR_FLAGS_407: + strcat(vc->card, "407)"); + break; + case CPIA2_VP_SENSOR_FLAGS_409: + strcat(vc->card, "409)"); + break; + case CPIA2_VP_SENSOR_FLAGS_410: + strcat(vc->card, "410)"); + break; + case CPIA2_VP_SENSOR_FLAGS_500: + strcat(vc->card, "500)"); + break; + default: + strcat(vc->card, "???)"); + break; + } + + if (usb_make_path(cam->dev, vc->bus_info, sizeof(vc->bus_info)) <0) + memset(vc->bus_info,0, sizeof(vc->bus_info)); + + vc->version = KERNEL_VERSION(CPIA2_MAJ_VER, CPIA2_MIN_VER, + CPIA2_PATCH_VER); + + vc->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + + return 0; +} + +/****************************************************************************** + * + * ioctl_input + * + * V4L2 input get/set/enumerate + * + *****************************************************************************/ + +static int ioctl_input(unsigned int ioclt_nr,void *arg,struct camera_data *cam) +{ + struct v4l2_input *i = arg; + + if(ioclt_nr != VIDIOC_G_INPUT) { + if (i->index != 0) + return -EINVAL; + } + + memset(i, 0, sizeof(*i)); + strcpy(i->name, "Camera"); + i->type = V4L2_INPUT_TYPE_CAMERA; + + return 0; +} + +/****************************************************************************** + * + * ioctl_enum_fmt + * + * V4L2 format enumerate + * + *****************************************************************************/ + +static int ioctl_enum_fmt(void *arg,struct camera_data *cam) +{ + struct v4l2_fmtdesc *f = arg; + int index = f->index; + + if (index < 0 || index > 1) + return -EINVAL; + + memset(f, 0, sizeof(*f)); + f->index = index; + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->flags = V4L2_FMT_FLAG_COMPRESSED; + switch(index) { + case 0: + strcpy(f->description, "MJPEG"); + f->pixelformat = V4L2_PIX_FMT_MJPEG; + break; + case 1: + strcpy(f->description, "JPEG"); + f->pixelformat = V4L2_PIX_FMT_JPEG; + break; + default: + return -EINVAL; + } + + return 0; +} + +/****************************************************************************** + * + * ioctl_try_fmt + * + * V4L2 format try + * + *****************************************************************************/ + +static int ioctl_try_fmt(void *arg,struct camera_data *cam) +{ + struct v4l2_format *f = arg; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG && + f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG) + return -EINVAL; + + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = cam->frame_size; + f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; + f->fmt.pix.priv = 0; + + switch (cpia2_match_video_size(f->fmt.pix.width, f->fmt.pix.height)) { + case VIDEOSIZE_VGA: + f->fmt.pix.width = 640; + f->fmt.pix.height = 480; + break; + case VIDEOSIZE_CIF: + f->fmt.pix.width = 352; + f->fmt.pix.height = 288; + break; + case VIDEOSIZE_QVGA: + f->fmt.pix.width = 320; + f->fmt.pix.height = 240; + break; + case VIDEOSIZE_288_216: + f->fmt.pix.width = 288; + f->fmt.pix.height = 216; + break; + case VIDEOSIZE_256_192: + f->fmt.pix.width = 256; + f->fmt.pix.height = 192; + break; + case VIDEOSIZE_224_168: + f->fmt.pix.width = 224; + f->fmt.pix.height = 168; + break; + case VIDEOSIZE_192_144: + f->fmt.pix.width = 192; + f->fmt.pix.height = 144; + break; + case VIDEOSIZE_QCIF: + default: + f->fmt.pix.width = 176; + f->fmt.pix.height = 144; + break; + } + + return 0; +} + +/****************************************************************************** + * + * ioctl_set_fmt + * + * V4L2 format set + * + *****************************************************************************/ + +static int ioctl_set_fmt(void *arg,struct camera_data *cam, struct cpia2_fh *fh) +{ + struct v4l2_format *f = arg; + int err, frame; + + err = ioctl_try_fmt(arg, cam); + if(err != 0) + return err; + + /* Ensure that only this process can change the format. */ + err = v4l2_prio_change(&cam->prio, &fh->prio, V4L2_PRIORITY_RECORD); + if(err != 0) { + return err; + } + + cam->pixelformat = f->fmt.pix.pixelformat; + + /* NOTE: This should be set to 1 for MJPEG, but some apps don't handle + * the missing Huffman table properly. */ + cam->params.compression.inhibit_htables = 0; + /*f->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG;*/ + + /* we set the video window to something smaller or equal to what + * is requested by the user??? + */ + DBG("Requested width = %d, height = %d\n", + f->fmt.pix.width, f->fmt.pix.height); + if (f->fmt.pix.width != cam->vw.width || + f->fmt.pix.height != cam->vw.height) { + cam->vw.width = f->fmt.pix.width; + cam->vw.height = f->fmt.pix.height; + cam->params.roi.width = f->fmt.pix.width; + cam->params.roi.height = f->fmt.pix.height; + cpia2_set_format(cam); + } + + for (frame = 0; frame < cam->num_frames; ++frame) { + if (cam->buffers[frame].status == FRAME_READING) + if ((err = sync(cam, frame)) < 0) + return err; + + cam->buffers[frame].status = FRAME_EMPTY; + } + + return 0; +} + +/****************************************************************************** + * + * ioctl_get_fmt + * + * V4L2 format get + * + *****************************************************************************/ + +static int ioctl_get_fmt(void *arg,struct camera_data *cam) +{ + struct v4l2_format *f = arg; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + f->fmt.pix.width = cam->vw.width; + f->fmt.pix.height = cam->vw.height; + f->fmt.pix.pixelformat = cam->pixelformat; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = cam->frame_size; + f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG; + f->fmt.pix.priv = 0; + + return 0; +} + +/****************************************************************************** + * + * ioctl_cropcap + * + * V4L2 query cropping capabilities + * NOTE: cropping is currently disabled + * + *****************************************************************************/ + +static int ioctl_cropcap(void *arg,struct camera_data *cam) +{ + struct v4l2_cropcap *c = arg; + + if (c->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + c->bounds.left = 0; + c->bounds.top = 0; + c->bounds.width = cam->vw.width; + c->bounds.height = cam->vw.height; + c->defrect.left = 0; + c->defrect.top = 0; + c->defrect.width = cam->vw.width; + c->defrect.height = cam->vw.height; + c->pixelaspect.numerator = 1; + c->pixelaspect.denominator = 1; + + return 0; +} + +/****************************************************************************** + * + * ioctl_queryctrl + * + * V4L2 query possible control variables + * + *****************************************************************************/ + +static int ioctl_queryctrl(void *arg,struct camera_data *cam) +{ + struct v4l2_queryctrl *c = arg; + int i; + + for(i=0; i<NUM_CONTROLS; ++i) { + if(c->id == controls[i].id) { + memcpy(c, controls+i, sizeof(*c)); + break; + } + } + + if(i == NUM_CONTROLS) + return -EINVAL; + + /* Some devices have additional limitations */ + switch(c->id) { + case V4L2_CID_BRIGHTNESS: + /*** + * Don't let the register be set to zero - bug in VP4 + * flash of full brightness + ***/ + if (cam->params.pnp_id.device_type == DEVICE_STV_672) + c->minimum = 1; + break; + case V4L2_CID_VFLIP: + // VP5 Only + if(cam->params.pnp_id.device_type == DEVICE_STV_672) + c->flags |= V4L2_CTRL_FLAG_DISABLED; + break; + case CPIA2_CID_FRAMERATE: + if(cam->params.pnp_id.device_type == DEVICE_STV_672 && + cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){ + // Maximum 15fps + int i; + for(i=0; i<c->maximum; ++i) { + if(framerate_controls[i].value == + CPIA2_VP_FRAMERATE_15) { + c->maximum = i; + c->default_value = i; + } + } + } + break; + case CPIA2_CID_FLICKER_MODE: + // Flicker control only valid for 672. + if(cam->params.pnp_id.device_type != DEVICE_STV_672) + c->flags |= V4L2_CTRL_FLAG_DISABLED; + break; + case CPIA2_CID_LIGHTS: + // Light control only valid for the QX5 Microscope. + if(cam->params.pnp_id.product != 0x151) + c->flags |= V4L2_CTRL_FLAG_DISABLED; + break; + default: + break; + } + + return 0; +} + +/****************************************************************************** + * + * ioctl_querymenu + * + * V4L2 query possible control variables + * + *****************************************************************************/ + +static int ioctl_querymenu(void *arg,struct camera_data *cam) +{ + struct v4l2_querymenu *m = arg; + + memset(m->name, 0, sizeof(m->name)); + m->reserved = 0; + + switch(m->id) { + case CPIA2_CID_FLICKER_MODE: + if(m->index < 0 || m->index >= NUM_FLICKER_CONTROLS) + return -EINVAL; + + strcpy(m->name, flicker_controls[m->index].name); + break; + case CPIA2_CID_FRAMERATE: + { + int maximum = NUM_FRAMERATE_CONTROLS - 1; + if(cam->params.pnp_id.device_type == DEVICE_STV_672 && + cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){ + // Maximum 15fps + int i; + for(i=0; i<maximum; ++i) { + if(framerate_controls[i].value == + CPIA2_VP_FRAMERATE_15) + maximum = i; + } + } + if(m->index < 0 || m->index > maximum) + return -EINVAL; + + strcpy(m->name, framerate_controls[m->index].name); + break; + } + case CPIA2_CID_LIGHTS: + if(m->index < 0 || m->index >= NUM_LIGHTS_CONTROLS) + return -EINVAL; + + strcpy(m->name, lights_controls[m->index].name); + break; + default: + return -EINVAL; + } + + return 0; +} + +/****************************************************************************** + * + * ioctl_g_ctrl + * + * V4L2 get the value of a control variable + * + *****************************************************************************/ + +static int ioctl_g_ctrl(void *arg,struct camera_data *cam) +{ + struct v4l2_control *c = arg; + + switch(c->id) { + case V4L2_CID_BRIGHTNESS: + cpia2_do_command(cam, CPIA2_CMD_GET_VP_BRIGHTNESS, + TRANSFER_READ, 0); + c->value = cam->params.color_params.brightness; + break; + case V4L2_CID_CONTRAST: + cpia2_do_command(cam, CPIA2_CMD_GET_CONTRAST, + TRANSFER_READ, 0); + c->value = cam->params.color_params.contrast; + break; + case V4L2_CID_SATURATION: + cpia2_do_command(cam, CPIA2_CMD_GET_VP_SATURATION, + TRANSFER_READ, 0); + c->value = cam->params.color_params.saturation; + break; + case V4L2_CID_HFLIP: + cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, + TRANSFER_READ, 0); + c->value = (cam->params.vp_params.user_effects & + CPIA2_VP_USER_EFFECTS_MIRROR) != 0; + break; + case V4L2_CID_VFLIP: + cpia2_do_command(cam, CPIA2_CMD_GET_USER_EFFECTS, + TRANSFER_READ, 0); + c->value = (cam->params.vp_params.user_effects & + CPIA2_VP_USER_EFFECTS_FLIP) != 0; + break; + case CPIA2_CID_TARGET_KB: + c->value = cam->params.vc_params.target_kb; + break; + case CPIA2_CID_GPIO: + cpia2_do_command(cam, CPIA2_CMD_GET_VP_GPIO_DATA, + TRANSFER_READ, 0); + c->value = cam->params.vp_params.gpio_data; + break; + case CPIA2_CID_FLICKER_MODE: + { + int i, mode; + cpia2_do_command(cam, CPIA2_CMD_GET_FLICKER_MODES, + TRANSFER_READ, 0); + if(cam->params.flicker_control.cam_register & + CPIA2_VP_FLICKER_MODES_NEVER_FLICKER) { + mode = NEVER_FLICKER; + } else { + if(cam->params.flicker_control.cam_register & + CPIA2_VP_FLICKER_MODES_50HZ) { + mode = FLICKER_50; + } else { + mode = FLICKER_60; + } + } + for(i=0; i<NUM_FLICKER_CONTROLS; i++) { + if(flicker_controls[i].value == mode) { + c->value = i; + break; + } + } + if(i == NUM_FLICKER_CONTROLS) + return -EINVAL; + break; + } + case CPIA2_CID_FRAMERATE: + { + int maximum = NUM_FRAMERATE_CONTROLS - 1; + int i; + for(i=0; i<= maximum; i++) { + if(cam->params.vp_params.frame_rate == + framerate_controls[i].value) + break; + } + if(i > maximum) + return -EINVAL; + c->value = i; + break; + } + case CPIA2_CID_USB_ALT: + c->value = cam->params.camera_state.stream_mode; + break; + case CPIA2_CID_LIGHTS: + { + int i; + cpia2_do_command(cam, CPIA2_CMD_GET_VP_GPIO_DATA, + TRANSFER_READ, 0); + for(i=0; i<NUM_LIGHTS_CONTROLS; i++) { + if((cam->params.vp_params.gpio_data&GPIO_LIGHTS_MASK) == + lights_controls[i].value) { + break; + } + } + if(i == NUM_LIGHTS_CONTROLS) + return -EINVAL; + c->value = i; + break; + } + case CPIA2_CID_RESET_CAMERA: + return -EINVAL; + default: + return -EINVAL; + } + + DBG("Get control id:%d, value:%d\n", c->id, c->value); + + return 0; +} + +/****************************************************************************** + * + * ioctl_s_ctrl + * + * V4L2 set the value of a control variable + * + *****************************************************************************/ + +static int ioctl_s_ctrl(void *arg,struct camera_data *cam) +{ + struct v4l2_control *c = arg; + int i; + int retval = 0; + + DBG("Set control id:%d, value:%d\n", c->id, c->value); + + /* Check that the value is in range */ + for(i=0; i<NUM_CONTROLS; i++) { + if(c->id == controls[i].id) { + if(c->value < controls[i].minimum || + c->value > controls[i].maximum) { + return -EINVAL; + } + break; + } + } + if(i == NUM_CONTROLS) + return -EINVAL; + + switch(c->id) { + case V4L2_CID_BRIGHTNESS: + cpia2_set_brightness(cam, c->value); + break; + case V4L2_CID_CONTRAST: + cpia2_set_contrast(cam, c->value); + break; + case V4L2_CID_SATURATION: + cpia2_set_saturation(cam, c->value); + break; + case V4L2_CID_HFLIP: + cpia2_set_property_mirror(cam, c->value); + break; + case V4L2_CID_VFLIP: + cpia2_set_property_flip(cam, c->value); + break; + case CPIA2_CID_TARGET_KB: + retval = cpia2_set_target_kb(cam, c->value); + break; + case CPIA2_CID_GPIO: + retval = cpia2_set_gpio(cam, c->value); + break; + case CPIA2_CID_FLICKER_MODE: + retval = cpia2_set_flicker_mode(cam, + flicker_controls[c->value].value); + break; + case CPIA2_CID_FRAMERATE: + retval = cpia2_set_fps(cam, framerate_controls[c->value].value); + break; + case CPIA2_CID_USB_ALT: + retval = cpia2_usb_change_streaming_alternate(cam, c->value); + break; + case CPIA2_CID_LIGHTS: + retval = cpia2_set_gpio(cam, lights_controls[c->value].value); + break; + case CPIA2_CID_RESET_CAMERA: + cpia2_usb_stream_pause(cam); + cpia2_reset_camera(cam); + cpia2_usb_stream_resume(cam); + break; + default: + retval = -EINVAL; + } + + return retval; +} + +/****************************************************************************** + * + * ioctl_g_jpegcomp + * + * V4L2 get the JPEG compression parameters + * + *****************************************************************************/ + +static int ioctl_g_jpegcomp(void *arg,struct camera_data *cam) +{ + struct v4l2_jpegcompression *parms = arg; + + memset(parms, 0, sizeof(*parms)); + + parms->quality = 80; // TODO: Can this be made meaningful? + + parms->jpeg_markers = V4L2_JPEG_MARKER_DQT | V4L2_JPEG_MARKER_DRI; + if(!cam->params.compression.inhibit_htables) { + parms->jpeg_markers |= V4L2_JPEG_MARKER_DHT; + } + + parms->APPn = cam->APPn; + parms->APP_len = cam->APP_len; + if(cam->APP_len > 0) { + memcpy(parms->APP_data, cam->APP_data, cam->APP_len); + parms->jpeg_markers |= V4L2_JPEG_MARKER_APP; + } + + parms->COM_len = cam->COM_len; + if(cam->COM_len > 0) { + memcpy(parms->COM_data, cam->COM_data, cam->COM_len); + parms->jpeg_markers |= JPEG_MARKER_COM; + } + + DBG("G_JPEGCOMP APP_len:%d COM_len:%d\n", + parms->APP_len, parms->COM_len); + + return 0; +} + +/****************************************************************************** + * + * ioctl_s_jpegcomp + * + * V4L2 set the JPEG compression parameters + * NOTE: quality and some jpeg_markers are ignored. + * + *****************************************************************************/ + +static int ioctl_s_jpegcomp(void *arg,struct camera_data *cam) +{ + struct v4l2_jpegcompression *parms = arg; + + DBG("S_JPEGCOMP APP_len:%d COM_len:%d\n", + parms->APP_len, parms->COM_len); + + cam->params.compression.inhibit_htables = + !(parms->jpeg_markers & V4L2_JPEG_MARKER_DHT); + + if(parms->APP_len != 0) { + if(parms->APP_len > 0 && + parms->APP_len <= sizeof(cam->APP_data) && + parms->APPn >= 0 && parms->APPn <= 15) { + cam->APPn = parms->APPn; + cam->APP_len = parms->APP_len; + memcpy(cam->APP_data, parms->APP_data, parms->APP_len); + } else { + LOG("Bad APPn Params n=%d len=%d\n", + parms->APPn, parms->APP_len); + return -EINVAL; + } + } else { + cam->APP_len = 0; + } + + if(parms->COM_len != 0) { + if(parms->COM_len > 0 && + parms->COM_len <= sizeof(cam->COM_data)) { + cam->COM_len = parms->COM_len; + memcpy(cam->COM_data, parms->COM_data, parms->COM_len); + } else { + LOG("Bad COM_len=%d\n", parms->COM_len); + return -EINVAL; + } + } + + return 0; +} + +/****************************************************************************** + * + * ioctl_reqbufs + * + * V4L2 Initiate memory mapping. + * NOTE: The user's request is ignored. For now the buffers are fixed. + * + *****************************************************************************/ + +static int ioctl_reqbufs(void *arg,struct camera_data *cam) +{ + struct v4l2_requestbuffers *req = arg; + + if(req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + req->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + DBG("REQBUFS requested:%d returning:%d\n", req->count, cam->num_frames); + req->count = cam->num_frames; + memset(&req->reserved, 0, sizeof(req->reserved)); + + return 0; +} + +/****************************************************************************** + * + * ioctl_querybuf + * + * V4L2 Query memory buffer status. + * + *****************************************************************************/ + +static int ioctl_querybuf(void *arg,struct camera_data *cam) +{ + struct v4l2_buffer *buf = arg; + + if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + buf->index > cam->num_frames) + return -EINVAL; + + buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer; + buf->length = cam->frame_size; + + buf->memory = V4L2_MEMORY_MMAP; + + if(cam->mmapped) + buf->flags = V4L2_BUF_FLAG_MAPPED; + else + buf->flags = 0; + + switch (cam->buffers[buf->index].status) { + case FRAME_EMPTY: + case FRAME_ERROR: + case FRAME_READING: + buf->bytesused = 0; + buf->flags = V4L2_BUF_FLAG_QUEUED; + break; + case FRAME_READY: + buf->bytesused = cam->buffers[buf->index].length; + buf->timestamp = cam->buffers[buf->index].timestamp; + buf->sequence = cam->buffers[buf->index].seq; + buf->flags = V4L2_BUF_FLAG_DONE; + break; + } + + DBG("QUERYBUF index:%d offset:%d flags:%d seq:%d bytesused:%d\n", + buf->index, buf->m.offset, buf->flags, buf->sequence, + buf->bytesused); + + return 0; +} + +/****************************************************************************** + * + * ioctl_qbuf + * + * V4L2 User is freeing buffer + * + *****************************************************************************/ + +static int ioctl_qbuf(void *arg,struct camera_data *cam) +{ + struct v4l2_buffer *buf = arg; + + if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + buf->memory != V4L2_MEMORY_MMAP || + buf->index > cam->num_frames) + return -EINVAL; + + DBG("QBUF #%d\n", buf->index); + + if(cam->buffers[buf->index].status == FRAME_READY) + cam->buffers[buf->index].status = FRAME_EMPTY; + + return 0; +} + +/****************************************************************************** + * + * find_earliest_filled_buffer + * + * Helper for ioctl_dqbuf. Find the next ready buffer. + * + *****************************************************************************/ + +static int find_earliest_filled_buffer(struct camera_data *cam) +{ + int i; + int found = -1; + for (i=0; i<cam->num_frames; i++) { + if(cam->buffers[i].status == FRAME_READY) { + if(found < 0) { + found = i; + } else { + /* find which buffer is earlier */ + struct timeval *tv1, *tv2; + tv1 = &cam->buffers[i].timestamp; + tv2 = &cam->buffers[found].timestamp; + if(tv1->tv_sec < tv2->tv_sec || + (tv1->tv_sec == tv2->tv_sec && + tv1->tv_usec < tv2->tv_usec)) + found = i; + } + } + } + return found; +} + +/****************************************************************************** + * + * ioctl_dqbuf + * + * V4L2 User is asking for a filled buffer. + * + *****************************************************************************/ + +static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file) +{ + struct v4l2_buffer *buf = arg; + int frame; + + if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + buf->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + frame = find_earliest_filled_buffer(cam); + + if(frame < 0 && file->f_flags&O_NONBLOCK) + return -EAGAIN; + + if(frame < 0) { + /* Wait for a frame to become available */ + struct framebuf *cb=cam->curbuff; + mutex_unlock(&cam->busy_lock); + wait_event_interruptible(cam->wq_stream, + !cam->present || + (cb=cam->curbuff)->status == FRAME_READY); + mutex_lock(&cam->busy_lock); + if (signal_pending(current)) + return -ERESTARTSYS; + if(!cam->present) + return -ENOTTY; + frame = cb->num; + } + + + buf->index = frame; + buf->bytesused = cam->buffers[buf->index].length; + buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_DONE; + buf->field = V4L2_FIELD_NONE; + buf->timestamp = cam->buffers[buf->index].timestamp; + buf->sequence = cam->buffers[buf->index].seq; + buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer; + buf->length = cam->frame_size; + buf->input = 0; + buf->reserved = 0; + memset(&buf->timecode, 0, sizeof(buf->timecode)); + + DBG("DQBUF #%d status:%d seq:%d length:%d\n", buf->index, + cam->buffers[buf->index].status, buf->sequence, buf->bytesused); + + return 0; +} + +/****************************************************************************** + * + * cpia2_ioctl + * + *****************************************************************************/ +static int cpia2_do_ioctl(struct inode *inode, struct file *file, + unsigned int ioctl_nr, void *arg) +{ + struct video_device *dev = video_devdata(file); + struct camera_data *cam = video_get_drvdata(dev); + int retval = 0; + + if (!cam) + return -ENOTTY; + + /* make this _really_ smp-safe */ + if (mutex_lock_interruptible(&cam->busy_lock)) + return -ERESTARTSYS; + + if (!cam->present) { + mutex_unlock(&cam->busy_lock); + return -ENODEV; + } + + /* Priority check */ + switch (ioctl_nr) { + case VIDIOCSWIN: + case VIDIOCMCAPTURE: + case VIDIOC_S_FMT: + { + struct cpia2_fh *fh = file->private_data; + retval = v4l2_prio_check(&cam->prio, &fh->prio); + if(retval) { + mutex_unlock(&cam->busy_lock); + return retval; + } + break; + } + case VIDIOCGMBUF: + case VIDIOCSYNC: + { + struct cpia2_fh *fh = file->private_data; + if(fh->prio != V4L2_PRIORITY_RECORD) { + mutex_unlock(&cam->busy_lock); + return -EBUSY; + } + break; + } + default: + break; + } + + switch (ioctl_nr) { + case VIDIOCGCAP: /* query capabilities */ + retval = ioctl_cap_query(arg, cam); + break; + + case VIDIOCGCHAN: /* get video source - we are a camera, nothing else */ + retval = ioctl_get_channel(arg); + break; + case VIDIOCSCHAN: /* set video source - we are a camera, nothing else */ + retval = ioctl_set_channel(arg); + break; + case VIDIOCGPICT: /* image properties */ + memcpy(arg, &cam->vp, sizeof(struct video_picture)); + break; + case VIDIOCSPICT: + retval = ioctl_set_image_prop(arg, cam); + break; + case VIDIOCGWIN: /* get/set capture window */ + memcpy(arg, &cam->vw, sizeof(struct video_window)); + break; + case VIDIOCSWIN: + retval = ioctl_set_window_size(arg, cam, file->private_data); + break; + case VIDIOCGMBUF: /* mmap interface */ + retval = ioctl_get_mbuf(arg, cam); + break; + case VIDIOCMCAPTURE: + retval = ioctl_mcapture(arg, cam, file->private_data); + break; + case VIDIOCSYNC: + retval = ioctl_sync(arg, cam); + break; + /* pointless to implement overlay with this camera */ + case VIDIOCCAPTURE: + case VIDIOCGFBUF: + case VIDIOCSFBUF: + case VIDIOCKEY: + retval = -EINVAL; + break; + + /* tuner interface - we have none */ + case VIDIOCGTUNER: + case VIDIOCSTUNER: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + retval = -EINVAL; + break; + + /* audio interface - we have none */ + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + retval = -EINVAL; + break; + + /* CPIA2 extension to Video4Linux API */ + case CPIA2_IOC_SET_GPIO: + retval = ioctl_set_gpio(arg, cam); + break; + case VIDIOC_QUERYCAP: + retval = ioctl_querycap(arg,cam); + break; + + case VIDIOC_ENUMINPUT: + case VIDIOC_G_INPUT: + case VIDIOC_S_INPUT: + retval = ioctl_input(ioctl_nr, arg,cam); + break; + + case VIDIOC_ENUM_FMT: + retval = ioctl_enum_fmt(arg,cam); + break; + case VIDIOC_TRY_FMT: + retval = ioctl_try_fmt(arg,cam); + break; + case VIDIOC_G_FMT: + retval = ioctl_get_fmt(arg,cam); + break; + case VIDIOC_S_FMT: + retval = ioctl_set_fmt(arg,cam,file->private_data); + break; + + case VIDIOC_CROPCAP: + retval = ioctl_cropcap(arg,cam); + break; + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + // TODO: I think cropping can be implemented - SJB + retval = -EINVAL; + break; + + case VIDIOC_QUERYCTRL: + retval = ioctl_queryctrl(arg,cam); + break; + case VIDIOC_QUERYMENU: + retval = ioctl_querymenu(arg,cam); + break; + case VIDIOC_G_CTRL: + retval = ioctl_g_ctrl(arg,cam); + break; + case VIDIOC_S_CTRL: + retval = ioctl_s_ctrl(arg,cam); + break; + + case VIDIOC_G_JPEGCOMP: + retval = ioctl_g_jpegcomp(arg,cam); + break; + case VIDIOC_S_JPEGCOMP: + retval = ioctl_s_jpegcomp(arg,cam); + break; + + case VIDIOC_G_PRIORITY: + { + struct cpia2_fh *fh = file->private_data; + *(enum v4l2_priority*)arg = fh->prio; + break; + } + case VIDIOC_S_PRIORITY: + { + struct cpia2_fh *fh = file->private_data; + enum v4l2_priority prio; + prio = *(enum v4l2_priority*)arg; + if(cam->streaming && + prio != fh->prio && + fh->prio == V4L2_PRIORITY_RECORD) { + /* Can't drop record priority while streaming */ + retval = -EBUSY; + } else if(prio == V4L2_PRIORITY_RECORD && + prio != fh->prio && + v4l2_prio_max(&cam->prio) == V4L2_PRIORITY_RECORD) { + /* Only one program can record at a time */ + retval = -EBUSY; + } else { + retval = v4l2_prio_change(&cam->prio, &fh->prio, prio); + } + break; + } + + case VIDIOC_REQBUFS: + retval = ioctl_reqbufs(arg,cam); + break; + case VIDIOC_QUERYBUF: + retval = ioctl_querybuf(arg,cam); + break; + case VIDIOC_QBUF: + retval = ioctl_qbuf(arg,cam); + break; + case VIDIOC_DQBUF: + retval = ioctl_dqbuf(arg,cam,file); + break; + case VIDIOC_STREAMON: + { + int type; + DBG("VIDIOC_STREAMON, streaming=%d\n", cam->streaming); + type = *(int*)arg; + if(!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + retval = -EINVAL; + + if(!cam->streaming) { + retval = cpia2_usb_stream_start(cam, + cam->params.camera_state.stream_mode); + } else { + retval = -EINVAL; + } + + break; + } + case VIDIOC_STREAMOFF: + { + int type; + DBG("VIDIOC_STREAMOFF, streaming=%d\n", cam->streaming); + type = *(int*)arg; + if(!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + retval = -EINVAL; + + if(cam->streaming) { + retval = cpia2_usb_stream_stop(cam); + } else { + retval = -EINVAL; + } + + break; + } + + case VIDIOC_ENUMOUTPUT: + case VIDIOC_G_OUTPUT: + case VIDIOC_S_OUTPUT: + case VIDIOC_G_MODULATOR: + case VIDIOC_S_MODULATOR: + + case VIDIOC_ENUMAUDIO: + case VIDIOC_G_AUDIO: + case VIDIOC_S_AUDIO: + + case VIDIOC_ENUMAUDOUT: + case VIDIOC_G_AUDOUT: + case VIDIOC_S_AUDOUT: + + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYSTD: + case VIDIOC_G_STD: + case VIDIOC_S_STD: + + case VIDIOC_G_TUNER: + case VIDIOC_S_TUNER: + case VIDIOC_G_FREQUENCY: + case VIDIOC_S_FREQUENCY: + + case VIDIOC_OVERLAY: + case VIDIOC_G_FBUF: + case VIDIOC_S_FBUF: + + case VIDIOC_G_PARM: + case VIDIOC_S_PARM: + retval = -EINVAL; + break; + default: + retval = -ENOIOCTLCMD; + break; + } + + mutex_unlock(&cam->busy_lock); + return retval; +} + +static int cpia2_ioctl(struct inode *inode, struct file *file, + unsigned int ioctl_nr, unsigned long iarg) +{ + return video_usercopy(inode, file, ioctl_nr, iarg, cpia2_do_ioctl); +} + +/****************************************************************************** + * + * cpia2_mmap + * + *****************************************************************************/ +static int cpia2_mmap(struct file *file, struct vm_area_struct *area) +{ + int retval; + struct video_device *dev = video_devdata(file); + struct camera_data *cam = video_get_drvdata(dev); + + /* Priority check */ + struct cpia2_fh *fh = file->private_data; + if(fh->prio != V4L2_PRIORITY_RECORD) { + return -EBUSY; + } + + retval = cpia2_remap_buffer(cam, area); + + if(!retval) + fh->mmapped = 1; + return retval; +} + +/****************************************************************************** + * + * reset_camera_struct_v4l + * + * Sets all values to the defaults + *****************************************************************************/ +static void reset_camera_struct_v4l(struct camera_data *cam) +{ + /*** + * Fill in the v4l structures. video_cap is filled in inside the VIDIOCCAP + * Ioctl. Here, just do the window and picture stucts. + ***/ + cam->vp.palette = (u16) VIDEO_PALETTE_RGB24; /* Is this right? */ + cam->vp.brightness = (u16) cam->params.color_params.brightness * 256; + cam->vp.colour = (u16) cam->params.color_params.saturation * 256; + cam->vp.contrast = (u16) cam->params.color_params.contrast * 256; + + cam->vw.x = 0; + cam->vw.y = 0; + cam->vw.width = cam->params.roi.width; + cam->vw.height = cam->params.roi.height; + cam->vw.flags = 0; + cam->vw.clipcount = 0; + + cam->frame_size = buffer_size; + cam->num_frames = num_buffers; + + /* FlickerModes */ + cam->params.flicker_control.flicker_mode_req = flicker_mode; + cam->params.flicker_control.mains_frequency = flicker_freq; + + /* streamMode */ + cam->params.camera_state.stream_mode = alternate; + + cam->pixelformat = V4L2_PIX_FMT_JPEG; + v4l2_prio_init(&cam->prio); + return; +} + +/*** + * The v4l video device structure initialized for this device + ***/ +static struct file_operations fops_template = { + .owner = THIS_MODULE, + .open = cpia2_open, + .release = cpia2_close, + .read = cpia2_v4l_read, + .poll = cpia2_v4l_poll, + .ioctl = cpia2_ioctl, + .llseek = no_llseek, + .compat_ioctl = v4l_compat_ioctl32, + .mmap = cpia2_mmap, +}; + +static struct video_device cpia2_template = { + /* I could not find any place for the old .initialize initializer?? */ + .owner= THIS_MODULE, + .name= "CPiA2 Camera", + .type= VID_TYPE_CAPTURE, + .type2 = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING, + .hardware= VID_HARDWARE_CPIA2, + .minor= -1, + .fops= &fops_template, + .release= video_device_release, +}; + +/****************************************************************************** + * + * cpia2_register_camera + * + *****************************************************************************/ +int cpia2_register_camera(struct camera_data *cam) +{ + cam->vdev = video_device_alloc(); + if(!cam->vdev) + return -ENOMEM; + + memcpy(cam->vdev, &cpia2_template, sizeof(cpia2_template)); + video_set_drvdata(cam->vdev, cam); + + reset_camera_struct_v4l(cam); + + /* register v4l device */ + if (video_register_device + (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + ERR("video_register_device failed\n"); + video_device_release(cam->vdev); + return -ENODEV; + } + + return 0; +} + +/****************************************************************************** + * + * cpia2_unregister_camera + * + *****************************************************************************/ +void cpia2_unregister_camera(struct camera_data *cam) +{ + if (!cam->open_count) { + video_unregister_device(cam->vdev); + } else { + LOG("/dev/video%d removed while open, " + "deferring video_unregister_device\n", + cam->vdev->minor); + } +} + +/****************************************************************************** + * + * check_parameters + * + * Make sure that all user-supplied parameters are sensible + *****************************************************************************/ +static void __init check_parameters(void) +{ + if(buffer_size < PAGE_SIZE) { + buffer_size = PAGE_SIZE; + LOG("buffer_size too small, setting to %d\n", buffer_size); + } else if(buffer_size > 1024*1024) { + /* arbitrary upper limiit */ + buffer_size = 1024*1024; + LOG("buffer_size ridiculously large, setting to %d\n", + buffer_size); + } else { + buffer_size += PAGE_SIZE-1; + buffer_size &= ~(PAGE_SIZE-1); + } + + if(num_buffers < 1) { + num_buffers = 1; + LOG("num_buffers too small, setting to %d\n", num_buffers); + } else if(num_buffers > VIDEO_MAX_FRAME) { + num_buffers = VIDEO_MAX_FRAME; + LOG("num_buffers too large, setting to %d\n", num_buffers); + } + + if(alternate < USBIF_ISO_1 || alternate > USBIF_ISO_6) { + alternate = DEFAULT_ALT; + LOG("alternate specified is invalid, using %d\n", alternate); + } + + if (flicker_mode != NEVER_FLICKER && flicker_mode != ANTI_FLICKER_ON) { + flicker_mode = NEVER_FLICKER; + LOG("Flicker mode specified is invalid, using %d\n", + flicker_mode); + } + + if (flicker_freq != FLICKER_50 && flicker_freq != FLICKER_60) { + flicker_freq = FLICKER_60; + LOG("Flicker mode specified is invalid, using %d\n", + flicker_freq); + } + + if(video_nr < -1 || video_nr > 64) { + video_nr = -1; + LOG("invalid video_nr specified, must be -1 to 64\n"); + } + + DBG("Using %d buffers, each %d bytes, alternate=%d\n", + num_buffers, buffer_size, alternate); +} + +/************ Module Stuff ***************/ + + +/****************************************************************************** + * + * cpia2_init/module_init + * + *****************************************************************************/ +static int __init cpia2_init(void) +{ + LOG("%s v%d.%d.%d\n", + ABOUT, CPIA2_MAJ_VER, CPIA2_MIN_VER, CPIA2_PATCH_VER); + check_parameters(); + cpia2_usb_init(); + return 0; +} + + +/****************************************************************************** + * + * cpia2_exit/module_exit + * + *****************************************************************************/ +static void __exit cpia2_exit(void) +{ + cpia2_usb_cleanup(); + schedule_timeout(2 * HZ); +} + +module_init(cpia2_init); +module_exit(cpia2_exit); + diff --git a/drivers/media/video/cpia2/cpia2dev.h b/drivers/media/video/cpia2/cpia2dev.h new file mode 100644 index 000000000000..d58097ce0d5e --- /dev/null +++ b/drivers/media/video/cpia2/cpia2dev.h @@ -0,0 +1,50 @@ +/**************************************************************************** + * + * Filename: cpia2dev.h + * + * Copyright 2001, STMicrolectronics, Inc. + * + * Contact: steve.miller@st.com + * + * Description: + * This file provides definitions for applications wanting to use the + * cpia2 driver beyond the generic v4l capabilities. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ****************************************************************************/ + +#ifndef CPIA2_DEV_HEADER +#define CPIA2_DEV_HEADER + +#include <linux/videodev.h> + +/*** + * The following defines are ioctl numbers based on video4linux private ioctls, + * which can range from 192 (BASE_VIDIOCPRIVATE) to 255. All of these take int + * args + */ +#define CPIA2_IOC_SET_GPIO _IOW('v', BASE_VIDIOCPRIVATE + 17, __u32) + +/* V4L2 driver specific controls */ +#define CPIA2_CID_TARGET_KB (V4L2_CID_PRIVATE_BASE+0) +#define CPIA2_CID_GPIO (V4L2_CID_PRIVATE_BASE+1) +#define CPIA2_CID_FLICKER_MODE (V4L2_CID_PRIVATE_BASE+2) +#define CPIA2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE+3) +#define CPIA2_CID_USB_ALT (V4L2_CID_PRIVATE_BASE+4) +#define CPIA2_CID_LIGHTS (V4L2_CID_PRIVATE_BASE+5) +#define CPIA2_CID_RESET_CAMERA (V4L2_CID_PRIVATE_BASE+6) + +#endif diff --git a/drivers/media/video/cpia2/cpia2patch.h b/drivers/media/video/cpia2/cpia2patch.h new file mode 100644 index 000000000000..7f085fbe76fb --- /dev/null +++ b/drivers/media/video/cpia2/cpia2patch.h @@ -0,0 +1,233 @@ +/**************************************************************************** + * + * Filename: cpia2patch.h + * + * Copyright 2001, STMicrolectronics, Inc. + * + * Contact: steve.miller@st.com + * + * Description: + * This file contains patch data for the CPiA2 (stv0672) VP4. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ****************************************************************************/ + +#ifndef CPIA2_PATCH_HEADER +#define CPIA2_PATCH_HEADER + +typedef struct { + unsigned char reg; + unsigned char count; + const unsigned char *data; +} cpia2_patch; + +static const unsigned char start_address_hi[1] = { + 0x01 +}; + +static const unsigned char start_address_lo[1] = { + 0xBC +}; + +static const unsigned char patch_block0[64] = { + 0xE3, 0x02, 0xE3, 0x03, 0xE3, 0x04, 0xE3, 0x05, + 0xE3, 0x06, 0xE3, 0x07, 0x93, 0x44, 0x56, 0xD4, + 0x93, 0x4E, 0x56, 0x51, 0x93, 0x4E, 0x51, 0xD6, + 0x93, 0x4E, 0x4F, 0x54, 0x93, 0x4E, 0x92, 0x4F, + 0x92, 0xA4, 0x93, 0x05, 0x92, 0xF4, 0x93, 0x1B, + 0x92, 0x92, 0x91, 0xE6, 0x92, 0x36, 0x92, 0x74, + 0x92, 0x4A, 0x92, 0x8C, 0x92, 0x8E, 0xC8, 0xD0, + 0x0B, 0x42, 0x02, 0xA0, 0xCA, 0x92, 0x09, 0x02 +}; + +static const unsigned char patch_block1[64] = { + 0xC9, 0x10, 0x0A, 0x0A, 0x0A, 0x81, 0xE3, 0xB8, + 0xE3, 0xB0, 0xE3, 0xA8, 0xE3, 0xA0, 0xE3, 0x98, + 0xE3, 0x90, 0xE1, 0x00, 0xCF, 0xD7, 0x0A, 0x12, + 0xCC, 0x95, 0x08, 0xB2, 0x0A, 0x18, 0xE1, 0x00, + 0x01, 0xEE, 0x0C, 0x08, 0x4A, 0x12, 0xC8, 0x18, + 0xF0, 0x9A, 0xC0, 0x22, 0xF3, 0x1C, 0x4A, 0x13, + 0xF3, 0x14, 0xC8, 0xA0, 0xF2, 0x14, 0xF2, 0x1C, + 0xEB, 0x13, 0xD3, 0xA2, 0x63, 0x16, 0x48, 0x9E +}; + +static const unsigned char patch_block2[64] = { + 0xF0, 0x18, 0xA4, 0x03, 0xF3, 0x93, 0xC0, 0x58, + 0xF7, 0x13, 0x51, 0x9C, 0xE9, 0x20, 0xCF, 0xEF, + 0x63, 0xF9, 0x92, 0x2E, 0xD3, 0x5F, 0x63, 0xFA, + 0x92, 0x2E, 0xD3, 0x67, 0x63, 0xFB, 0x92, 0x2E, + 0xD3, 0x6F, 0xE9, 0x1A, 0x63, 0x16, 0x48, 0xA7, + 0xF0, 0x20, 0xA4, 0x06, 0xF3, 0x94, 0xC0, 0x27, + 0xF7, 0x14, 0xF5, 0x13, 0x51, 0x9D, 0xF6, 0x13, + 0x63, 0x18, 0xC4, 0x20, 0xCB, 0xEF, 0x63, 0xFC +}; + +static const unsigned char patch_block3[64] = { + 0x92, 0x2E, 0xD3, 0x77, 0x63, 0xFD, 0x92, 0x2E, + 0xD3, 0x7F, 0x63, 0xFE, 0x92, 0x2E, 0xD3, 0x87, + 0x63, 0xFF, 0x92, 0x2E, 0xD3, 0x8F, 0x64, 0x38, + 0x92, 0x2E, 0xD3, 0x97, 0x64, 0x39, 0x92, 0x2E, + 0xD3, 0x9F, 0xE1, 0x00, 0xF5, 0x3A, 0xF4, 0x3B, + 0xF7, 0xBF, 0xF2, 0xBC, 0xF2, 0x3D, 0xE1, 0x00, + 0x80, 0x87, 0x90, 0x80, 0x51, 0xD5, 0x02, 0x22, + 0x02, 0x32, 0x4B, 0xD3, 0xF7, 0x11, 0x0B, 0xDA +}; + +static const unsigned char patch_block4[64] = { + 0xE1, 0x00, 0x0E, 0x02, 0x02, 0x40, 0x0D, 0xB5, + 0xE3, 0x02, 0x48, 0x55, 0xE5, 0x12, 0xA4, 0x01, + 0xE8, 0x1B, 0xE3, 0x90, 0xF0, 0x18, 0xA4, 0x01, + 0xE8, 0xBF, 0x8D, 0xB8, 0x4B, 0xD1, 0x4B, 0xD8, + 0x0B, 0xCB, 0x0B, 0xC2, 0xE1, 0x00, 0xE3, 0x02, + 0xE3, 0x03, 0x52, 0xD3, 0x60, 0x59, 0xE6, 0x93, + 0x0D, 0x22, 0x52, 0xD4, 0xE6, 0x93, 0x0D, 0x2A, + 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x5D +}; + +static const unsigned char patch_block5[64] = { + 0x02, 0x63, 0xE3, 0x02, 0xC8, 0x12, 0x02, 0xCA, + 0xC8, 0x52, 0x02, 0xC2, 0x82, 0x68, 0xE3, 0x02, + 0xC8, 0x14, 0x02, 0xCA, 0xC8, 0x90, 0x02, 0xC2, + 0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA, 0xCC, 0xD2, + 0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA, 0x0A, 0x98, + 0x0A, 0xA0, 0x0A, 0xA8, 0xE3, 0x90, 0xE1, 0x00, + 0xE3, 0x02, 0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA, + 0xCC, 0xD2, 0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA +}; + +static const unsigned char patch_block6[64] = { + 0x0A, 0x98, 0x0A, 0xA0, 0x0A, 0xA8, 0x49, 0x91, + 0xE5, 0x6A, 0xA4, 0x04, 0xC8, 0x12, 0x02, 0xCA, + 0xC8, 0x52, 0x82, 0x89, 0xC8, 0x14, 0x02, 0xCA, + 0xC8, 0x90, 0x02, 0xC2, 0xE3, 0x90, 0xE1, 0x00, + 0x08, 0x60, 0xE1, 0x00, 0x48, 0x53, 0xE8, 0x97, + 0x08, 0x5A, 0xE1, 0x00, 0xE3, 0x02, 0xE3, 0x03, + 0x54, 0xD3, 0x60, 0x59, 0xE6, 0x93, 0x0D, 0x52, + 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x9C +}; + +static const unsigned char patch_block7[64] = { + 0xE3, 0x02, 0x55, 0x13, 0x93, 0x17, 0x55, 0x13, + 0x93, 0x17, 0xE3, 0x90, 0xE1, 0x00, 0x75, 0x30, + 0xE3, 0x02, 0xE3, 0x03, 0x55, 0x55, 0x60, 0x59, + 0xE6, 0x93, 0x0D, 0xB2, 0xE3, 0x98, 0xE3, 0x90, + 0xE1, 0x00, 0x02, 0xAE, 0xE7, 0x92, 0xE9, 0x18, + 0xEA, 0x9A, 0xE8, 0x98, 0xE8, 0x10, 0xE8, 0x11, + 0xE8, 0x51, 0xD2, 0xDA, 0xD2, 0xF3, 0xE8, 0x13, + 0xD2, 0xFA, 0xE8, 0x50, 0xD2, 0xEA, 0xE8, 0xD0 +}; + +static const unsigned char patch_block8[64] = { + 0xE8, 0xD1, 0xD3, 0x0A, 0x03, 0x09, 0x48, 0x23, + 0xE5, 0x2C, 0xA0, 0x03, 0x48, 0x24, 0xEA, 0x1C, + 0x03, 0x08, 0xD2, 0xE3, 0xD3, 0x03, 0xD3, 0x13, + 0xE1, 0x00, 0x02, 0xCB, 0x05, 0x93, 0x57, 0x93, + 0xF0, 0x9A, 0xAC, 0x0B, 0xE3, 0x07, 0x92, 0xEA, + 0xE2, 0x9F, 0xE5, 0x06, 0xE3, 0xB0, 0xA0, 0x02, + 0xEB, 0x1E, 0x82, 0xD7, 0xEA, 0x1E, 0xE2, 0x3B, + 0x85, 0x9B, 0xE9, 0x1E, 0xC8, 0x90, 0x85, 0x94 +}; + +static const unsigned char patch_block9[64] = { + 0x02, 0xDE, 0x05, 0x80, 0x57, 0x93, 0xF0, 0xBA, + 0xAC, 0x06, 0x92, 0xEA, 0xE2, 0xBF, 0xE5, 0x06, + 0xA0, 0x01, 0xEB, 0xBF, 0x85, 0x88, 0xE9, 0x3E, + 0xC8, 0x90, 0x85, 0x81, 0xE9, 0x3E, 0xF0, 0xBA, + 0xF3, 0x39, 0xF0, 0x3A, 0x60, 0x17, 0xF0, 0x3A, + 0xC0, 0x90, 0xF0, 0xBA, 0xE1, 0x00, 0x00, 0x3F, + 0xE3, 0x02, 0xE3, 0x03, 0x58, 0x10, 0x60, 0x59, + 0xE6, 0x93, 0x0D, 0xA2, 0x58, 0x12, 0xE6, 0x93 +}; + +static const unsigned char patch_block10[64] = { + 0x0D, 0xAA, 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, + 0x03, 0x01, 0xE1, 0x00, 0x03, 0x03, 0x9B, 0x7D, + 0x8B, 0x8B, 0xE3, 0x02, 0xE3, 0x03, 0x58, 0x56, + 0x60, 0x59, 0xE6, 0x93, 0x0D, 0xBA, 0xE3, 0x98, + 0xE3, 0x90, 0xE1, 0x00, 0x03, 0x0F, 0x93, 0x11, + 0xE1, 0x00, 0xE3, 0x02, 0x4A, 0x11, 0x0B, 0x42, + 0x91, 0xAF, 0xE3, 0x90, 0xE1, 0x00, 0xF2, 0x91, + 0xF0, 0x91, 0xA3, 0xFE, 0xE1, 0x00, 0x60, 0x92 +}; + +static const unsigned char patch_block11[64] = { + 0xC0, 0x5F, 0xF0, 0x13, 0xF0, 0x13, 0x59, 0x5B, + 0xE2, 0x13, 0xF0, 0x11, 0x5A, 0x19, 0xE2, 0x13, + 0xE1, 0x00, 0x00, 0x00, 0x03, 0x27, 0x68, 0x61, + 0x76, 0x61, 0x6E, 0x61, 0x00, 0x06, 0x03, 0x2C, + 0xE3, 0x02, 0xE3, 0x03, 0xE9, 0x38, 0x59, 0x15, + 0x59, 0x5A, 0xF2, 0x9A, 0xBC, 0x0B, 0xA4, 0x0A, + 0x59, 0x1E, 0xF3, 0x11, 0xF0, 0x1A, 0xE2, 0xBB, + 0x59, 0x15, 0xF0, 0x11, 0x19, 0x2A, 0xE5, 0x02 +}; + +static const unsigned char patch_block12[54] = { + 0xA4, 0x01, 0xEB, 0xBF, 0xE3, 0x98, 0xE3, 0x90, + 0xE1, 0x00, 0x03, 0x42, 0x19, 0x28, 0xE1, 0x00, + 0xE9, 0x30, 0x60, 0x79, 0xE1, 0x00, 0xE3, 0x03, + 0xE3, 0x07, 0x60, 0x79, 0x93, 0x4E, 0xE3, 0xB8, + 0xE3, 0x98, 0xE1, 0x00, 0xE9, 0x1A, 0xF0, 0x1F, + 0xE2, 0x33, 0xF0, 0x91, 0xE2, 0x92, 0xE0, 0x32, + 0xF0, 0x31, 0xE1, 0x00, 0x00, 0x00 +}; + +static const unsigned char do_call[1] = { + 0x01 +}; + + +#define PATCH_DATA_SIZE 18 + +static const cpia2_patch patch_data[PATCH_DATA_SIZE] = { + {0x0A, sizeof(start_address_hi), start_address_hi} + , // 0 + {0x0B, sizeof(start_address_lo), start_address_lo} + , // 1 + {0x0C, sizeof(patch_block0), patch_block0} + , // 2 + {0x0C, sizeof(patch_block1), patch_block1} + , // 3 + {0x0C, sizeof(patch_block2), patch_block2} + , // 4 + {0x0C, sizeof(patch_block3), patch_block3} + , // 5 + {0x0C, sizeof(patch_block4), patch_block4} + , // 6 + {0x0C, sizeof(patch_block5), patch_block5} + , // 7 + {0x0C, sizeof(patch_block6), patch_block6} + , // 8 + {0x0C, sizeof(patch_block7), patch_block7} + , // 9 + {0x0C, sizeof(patch_block8), patch_block8} + , // 10 + {0x0C, sizeof(patch_block9), patch_block9} + , //11 + {0x0C, sizeof(patch_block10), patch_block10} + , // 12 + {0x0C, sizeof(patch_block11), patch_block11} + , // 13 + {0x0C, sizeof(patch_block12), patch_block12} + , // 14 + {0x0A, sizeof(start_address_hi), start_address_hi} + , // 15 + {0x0B, sizeof(start_address_lo), start_address_lo} + , // 16 + {0x0D, sizeof(do_call), do_call} //17 +}; + + +#endif diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c index 74cff626e044..3021f21aae36 100644 --- a/drivers/media/video/cpia_pp.c +++ b/drivers/media/video/cpia_pp.c @@ -23,7 +23,7 @@ */ /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */ -/* #define _CPIA_DEBUG_ 1 */ +/* #define _CPIA_DEBUG_ 1 */ #include <linux/config.h> @@ -45,7 +45,7 @@ static int cpia_pp_open(void *privdata); static int cpia_pp_registerCallback(void *privdata, void (*cb) (void *cbdata), - void *cbdata); + void *cbdata); static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data); static int cpia_pp_streamStart(void *privdata); static int cpia_pp_streamStop(void *privdata); @@ -93,7 +93,7 @@ struct pp_cam_entry { int stream_irq; }; -static struct cpia_camera_ops cpia_pp_ops = +static struct cpia_camera_ops cpia_pp_ops = { cpia_pp_open, cpia_pp_registerCallback, @@ -123,7 +123,7 @@ static void cpia_parport_disable_irq( struct parport *port ) { } /* Special CPiA PPC modes: These are invoked by using the 1284 Extensibility - * Link Flag during negotiation */ + * Link Flag during negotiation */ #define UPLOAD_FLAG 0x08 #define NIBBLE_TRANSFER 0x01 #define ECP_TRANSFER 0x03 @@ -139,17 +139,17 @@ static void cpia_parport_disable_irq( struct parport *port ) { /* CPiA nonstandard "Nibble" mode (no nDataAvail signal after each byte). */ /* The standard kernel parport_ieee1284_read_nibble() fails with the CPiA... */ -static size_t cpia_read_nibble (struct parport *port, - void *buffer, size_t len, +static size_t cpia_read_nibble (struct parport *port, + void *buffer, size_t len, int flags) { - /* adapted verbatim, with one change, from + /* adapted verbatim, with one change, from parport_ieee1284_read_nibble() in drivers/parport/ieee1284-ops.c */ unsigned char *buf = buffer; int i; unsigned char byte = 0; - + len *= 2; /* in nibbles */ for (i=0; i < len; i++) { unsigned char nibble; @@ -158,12 +158,12 @@ static size_t cpia_read_nibble (struct parport *port, * after every second nibble to signal that more * data is available. (the total number of Bytes that * should be sent is known; if too few are received, an error - * will be recorded after a timeout). + * will be recorded after a timeout). * This is incompatible with parport_ieee1284_read_nibble(), * which expects to find nFault LO after every second nibble. */ - /* Solution: modify cpia_read_nibble to only check for + /* Solution: modify cpia_read_nibble to only check for * nDataAvail before the first nibble is sent. */ @@ -216,7 +216,7 @@ static size_t cpia_read_nibble (struct parport *port, /* Second nibble */ byte |= nibble << 4; *buf++ = byte; - } else + } else byte = nibble; } @@ -238,18 +238,18 @@ static size_t cpia_read_nibble (struct parport *port, } /* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1) - * (See CPiA Data sheet p. 31) - * - * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a - * nonstandard variant of nibble mode which allows the same (mediocre) - * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable + * (See CPiA Data sheet p. 31) + * + * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a + * nonstandard variant of nibble mode which allows the same (mediocre) + * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable * parallel ports, but works also for non-TRISTATE-capable ports. * (Standard nibble mode only send 4 bits per cycle) * */ -static size_t cpia_read_nibble_stream(struct parport *port, - void *buffer, size_t len, +static size_t cpia_read_nibble_stream(struct parport *port, + void *buffer, size_t len, int flags) { int i; @@ -260,7 +260,7 @@ static size_t cpia_read_nibble_stream(struct parport *port, unsigned char nibble[2], byte = 0; int j; - /* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */ + /* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */ if (endseen > 3 ) break; @@ -268,7 +268,7 @@ static size_t cpia_read_nibble_stream(struct parport *port, parport_frob_control (port, PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD); - + /* Event 9: nAck goes low. */ port->ieee1284.phase = IEEE1284_PH_REV_DATA; if (parport_wait_peripheral (port, @@ -282,7 +282,7 @@ static size_t cpia_read_nibble_stream(struct parport *port, /* Read lower nibble */ nibble[0] = parport_read_status (port) >>3; - + /* Event 10: Set nAutoFd high. */ parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0); @@ -295,10 +295,10 @@ static size_t cpia_read_nibble_stream(struct parport *port, port->name); break; } - + /* Read upper nibble */ nibble[1] = parport_read_status (port) >>3; - + /* reassemble the byte */ for (j = 0; j < 2 ; j++ ) { nibble[j] &= ~8; @@ -335,8 +335,8 @@ static void EndTransferMode(struct pp_cam_entry *cam) static int ForwardSetup(struct pp_cam_entry *cam) { int retry; - - /* The CPiA uses ECP protocol for Downloads from the Host to the camera. + + /* The CPiA uses ECP protocol for Downloads from the Host to the camera. * This will be software-emulated if ECP hardware is not present */ @@ -375,9 +375,9 @@ static int ReverseSetup(struct pp_cam_entry *cam, int extensibility) upload_mode = mode; if(extensibility) mode = UPLOAD_FLAG|transfer_mode|IEEE1284_EXT_LINK; - /* the usual camera maximum response time is 10ms, but after + /* the usual camera maximum response time is 10ms, but after * receiving some commands, it needs up to 40ms. */ - + for(retry = 0; retry < 4; ++retry) { if(!parport_negotiate(cam->port, mode)) { break; @@ -439,10 +439,10 @@ static int ReadPacket(struct pp_cam_entry *cam, u8 *packet, size_t size) /* support for CPiA variant nibble reads */ if(cam->port->ieee1284.mode == IEEE1284_MODE_NIBBLE) { - if(cpia_read_nibble(cam->port, packet, size, 0) != size) - retval = -EIO; + if(cpia_read_nibble(cam->port, packet, size, 0) != size) + retval = -EIO; } else { - if(parport_read(cam->port, packet, size) != size) + if(parport_read(cam->port, packet, size) != size) retval = -EIO; } EndTransferMode(cam); @@ -542,18 +542,18 @@ static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock) block_size = PARPORT_CHUNK_SIZE; while( !cam->image_complete ) { cond_resched(); - + new_bytes = cpia_pp_read(cam->port, buffer, block_size ); if( new_bytes <= 0 ) { break; } i=-1; while(++i<new_bytes && endseen<4) { - if(*buffer==EOI) { - endseen++; - } else { - endseen=0; - } + if(*buffer==EOI) { + endseen++; + } else { + endseen=0; + } buffer++; } read_bytes += i; @@ -601,7 +601,7 @@ static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data) } if((err = ReadPacket(cam, buffer, 8)) < 0) { DBG("Error reading command result\n"); - return err; + return err; } memcpy(data, buffer, databytes); } else if(command[0] == DATA_OUT) { @@ -631,10 +631,10 @@ static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data) static int cpia_pp_open(void *privdata) { struct pp_cam_entry *cam = (struct pp_cam_entry *)privdata; - + if (cam == NULL) return -EINVAL; - + if(cam->open_count == 0) { if (parport_claim(cam->pdev)) { DBG("failed to claim the port\n"); @@ -645,12 +645,12 @@ static int cpia_pp_open(void *privdata) parport_write_control(cam->port, PARPORT_CONTROL_SELECT); udelay(50); parport_write_control(cam->port, - PARPORT_CONTROL_SELECT - | PARPORT_CONTROL_INIT); + PARPORT_CONTROL_SELECT + | PARPORT_CONTROL_INIT); } - + ++cam->open_count; - + return 0; } @@ -663,7 +663,7 @@ static int cpia_pp_registerCallback(void *privdata, void (*cb)(void *cbdata), vo { struct pp_cam_entry *cam = privdata; int retval = 0; - + if(cam->port->irq != PARPORT_IRQ_NONE) { INIT_WORK(&cam->cb_task, cb, cbdata); } else { @@ -707,9 +707,9 @@ static int cpia_pp_register(struct parport *port) LOG("failed to allocate camera structure\n"); return -ENOMEM; } - + pdev = parport_register_device(port, "cpia_pp", NULL, NULL, - NULL, 0, cam); + NULL, 0, cam); if (!pdev) { LOG("failed to parport_register_device\n"); @@ -753,19 +753,19 @@ static void cpia_pp_detach (struct parport *port) } cpia = NULL; } - spin_unlock( &cam_list_lock_pp ); + spin_unlock( &cam_list_lock_pp ); if (!cpia) { DBG("cpia_pp_detach failed to find cam_data in cam_list\n"); return; } - - cam = (struct pp_cam_entry *) cpia->lowlevel_data; + + cam = (struct pp_cam_entry *) cpia->lowlevel_data; cpia_unregister_camera(cpia); - if(cam->open_count > 0) + if(cam->open_count > 0) cpia_pp_close(cam); parport_unregister_device(cam->pdev); - cpia->lowlevel_data = NULL; + cpia->lowlevel_data = NULL; kfree(cam); } @@ -805,14 +805,14 @@ static struct parport_driver cpia_pp_driver = { int cpia_pp_init(void) { - printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT, + printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT, CPIA_PP_MAJ_VER,CPIA_PP_MIN_VER,CPIA_PP_PATCH_VER); if(parport_nr[0] == PPCPIA_PARPORT_OFF) { printk(" disabled\n"); return 0; } - + spin_lock_init( &cam_list_lock_pp ); if (parport_register_driver (&cpia_pp_driver)) { diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c index 03275c37c5d3..9c49a4b00116 100644 --- a/drivers/media/video/cpia_usb.c +++ b/drivers/media/video/cpia_usb.c @@ -22,7 +22,7 @@ */ /* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */ -/* #define _CPIA_DEBUG_ 1 */ +/* #define _CPIA_DEBUG_ 1 */ #include <linux/module.h> #include <linux/kernel.h> @@ -85,7 +85,7 @@ struct usb_cpia { static int cpia_usb_open(void *privdata); static int cpia_usb_registerCallback(void *privdata, void (*cb) (void *cbdata), - void *cbdata); + void *cbdata); static int cpia_usb_transferCmd(void *privdata, u8 *command, u8 *data); static int cpia_usb_streamStart(void *privdata); static int cpia_usb_streamStop(void *privdata); @@ -127,7 +127,7 @@ static void cpia_usb_complete(struct urb *urb, struct pt_regs *regs) ucpia->workbuff->status = FRAME_READING; ucpia->workbuff->length = 0; } - + for (i = 0; i < urb->number_of_packets; i++) { int n = urb->iso_frame_desc[i].actual_length; int st = urb->iso_frame_desc[i].status; @@ -141,9 +141,9 @@ static void cpia_usb_complete(struct urb *urb, struct pt_regs *regs) printk(KERN_DEBUG "cpia: scratch buf overflow!scr_len: %d, n: %d\n", ucpia->workbuff->length, n); return; } - + if (n) { - if ((ucpia->workbuff->length > 0) || + if ((ucpia->workbuff->length > 0) || (0x19 == cdata[0] && 0x68 == cdata[1])) { memcpy(ucpia->workbuff->data + ucpia->workbuff->length, cdata, n); ucpia->workbuff->length += n; @@ -160,7 +160,7 @@ static void cpia_usb_complete(struct urb *urb, struct pt_regs *regs) ucpia->workbuff = ucpia->workbuff->next; ucpia->workbuff->status = FRAME_EMPTY; ucpia->workbuff->length = 0; - + if (waitqueue_active(&ucpia->wq_stream)) wake_up_interruptible(&ucpia->wq_stream); } @@ -178,7 +178,7 @@ static int cpia_usb_open(void *privdata) struct usb_cpia *ucpia = (struct usb_cpia *) privdata; struct urb *urb; int ret, retval = 0, fx, err; - + if (!ucpia) return -EINVAL; @@ -191,7 +191,7 @@ static int cpia_usb_open(void *privdata) retval = -EINVAL; goto error_0; } - + ret = usb_set_interface(ucpia->dev, ucpia->iface, 3); if (ret < 0) { printk(KERN_ERR "cpia_usb_open: usb_set_interface error (ret = %d)\n", ret); @@ -286,7 +286,7 @@ error_1: error_0: kfree (ucpia->sbuf[0].data); ucpia->sbuf[0].data = NULL; - + return retval; } @@ -307,7 +307,7 @@ static int WritePacket(struct usb_device *udev, const u8 *packet, u8 *buf, size_ return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), packet[1] + (packet[0] << 8), USB_TYPE_VENDOR | USB_RECIP_DEVICE, - packet[2] + (packet[3] << 8), + packet[2] + (packet[3] << 8), packet[4] + (packet[5] << 8), buf, size, 1000); } @@ -324,7 +324,7 @@ static int ReadPacket(struct usb_device *udev, u8 *packet, u8 *buf, size_t size) return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), packet[1] + (packet[0] << 8), USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - packet[2] + (packet[3] << 8), + packet[2] + (packet[3] << 8), packet[4] + (packet[5] << 8), buf, size, 1000); } @@ -393,7 +393,7 @@ static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock) if (!ucpia || !ucpia->present) return -1; - + if (ucpia->curbuff->status != FRAME_READY) interruptible_sleep_on(&ucpia->wq_stream); else @@ -403,7 +403,7 @@ static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock) if (!mybuff) return -1; - + if (mybuff->status != FRAME_READY || mybuff->length < 4) { DBG("Something went wrong!\n"); return -1; @@ -411,7 +411,7 @@ static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock) memcpy(frame, mybuff->data, mybuff->length); mybuff->status = FRAME_EMPTY; - + /* DBG("read done, %d bytes, Header: %x/%x, Footer: %x%x%x%x\n", */ /* mybuff->length, frame[0], frame[1], */ /* frame[mybuff->length-4], frame[mybuff->length-3], */ @@ -447,7 +447,7 @@ static void cpia_usb_free_resources(struct usb_cpia *ucpia, int try) kfree(ucpia->sbuf[1].data); ucpia->sbuf[1].data = NULL; - + if (ucpia->sbuf[0].urb) { usb_kill_urb(ucpia->sbuf[0].urb); usb_free_urb(ucpia->sbuf[0].urb); @@ -490,7 +490,7 @@ static int cpia_probe(struct usb_interface *intf, struct usb_cpia *ucpia; struct cam_data *cam; int ret; - + /* A multi-config CPiA camera? */ if (udev->descriptor.bNumConfigurations != 1) return -ENODEV; @@ -539,7 +539,7 @@ static int cpia_probe(struct usb_interface *intf, /* Before register_camera, important */ ucpia->present = 1; - + cam = cpia_register_camera(&cpia_usb_ops, ucpia); if (!cam) { LOG("failed to cpia_register_camera\n"); @@ -591,7 +591,7 @@ static void cpia_disconnect(struct usb_interface *intf) struct cam_data *cam = usb_get_intfdata(intf); struct usb_cpia *ucpia; struct usb_device *udev; - + usb_set_intfdata(intf, NULL); if (!cam) return; @@ -600,7 +600,7 @@ static void cpia_disconnect(struct usb_interface *intf) spin_lock( &cam_list_lock_usb ); list_del(&cam->cam_data_list); spin_unlock( &cam_list_lock_usb ); - + ucpia->present = 0; cpia_unregister_camera(cam); @@ -631,7 +631,7 @@ static void cpia_disconnect(struct usb_interface *intf) static int __init usb_cpia_init(void) { - printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT, + printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT, CPIA_USB_MAJ_VER,CPIA_USB_MIN_VER,CPIA_USB_PATCH_VER); spin_lock_init(&cam_list_lock_usb); diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index 8739c64785ef..de87247c74ee 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -59,25 +59,25 @@ static int cs53l32a_read(struct i2c_client *client, u8 reg) static int cs53l32a_command(struct i2c_client *client, unsigned int cmd, void *arg) { - struct v4l2_audio *input = arg; + struct v4l2_routing *route = arg; struct v4l2_control *ctrl = arg; switch (cmd) { - case VIDIOC_S_AUDIO: + case VIDIOC_INT_G_AUDIO_ROUTING: + route->input = (cs53l32a_read(client, 0x01) >> 4) & 3; + route->output = 0; + break; + + case VIDIOC_INT_S_AUDIO_ROUTING: /* There are 2 physical inputs, but the second input can be placed in two modes, the first mode bypasses the PGA (gain), the second goes through the PGA. Hence there are three possible inputs to choose from. */ - if (input->index > 2) { - v4l_err(client, "Invalid input %d.\n", input->index); + if (route->input > 2) { + v4l_err(client, "Invalid input %d.\n", route->input); return -EINVAL; } - cs53l32a_write(client, 0x01, 0x01 + (input->index << 4)); - break; - - case VIDIOC_G_AUDIO: - memset(input, 0, sizeof(*input)); - input->index = (cs53l32a_read(client, 0x01) >> 4) & 3; + cs53l32a_write(client, 0x01, 0x01 + (route->input << 4)); break; case VIDIOC_G_CTRL: diff --git a/drivers/media/video/cs8420.h b/drivers/media/video/cs8420.h index 2b22f3a38de5..621c0c6678ea 100644 --- a/drivers/media/video/cs8420.h +++ b/drivers/media/video/cs8420.h @@ -20,7 +20,7 @@ #define __CS8420_H__ /* Initialization Sequence */ - + static __u8 init8420[] = { 1, 0x01, 2, 0x02, 3, 0x00, 4, 0x46, 5, 0x24, 6, 0x84, 18, 0x18, 19, 0x13, diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/video/cx25840/Kconfig new file mode 100644 index 000000000000..854264e42ec0 --- /dev/null +++ b/drivers/media/video/cx25840/Kconfig @@ -0,0 +1,9 @@ +config VIDEO_CX25840 + tristate "Conexant CX2584x audio/video decoders" + depends on VIDEO_DEV && I2C && EXPERIMENTAL + select FW_LOADER + ---help--- + Support for the Conexant CX2584x audio/video decoders. + + To compile this driver as a module, choose M here: the + module will be called cx25840 diff --git a/drivers/media/video/cx25840/Makefile b/drivers/media/video/cx25840/Makefile index 543ebacdc9d7..32a896c23d1e 100644 --- a/drivers/media/video/cx25840/Makefile +++ b/drivers/media/video/cx25840/Makefile @@ -1,6 +1,6 @@ cx25840-objs := cx25840-core.o cx25840-audio.o cx25840-firmware.o \ cx25840-vbi.o -obj-$(CONFIG_VIDEO_DECODER) += cx25840.o +obj-$(CONFIG_VIDEO_CX25840) += cx25840.o EXTRA_CFLAGS += -I$(src)/.. diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c index cb9a7981e408..a4540e858f21 100644 --- a/drivers/media/video/cx25840/cx25840-audio.c +++ b/drivers/media/video/cx25840/cx25840-audio.c @@ -18,7 +18,6 @@ #include <linux/videodev2.h> #include <linux/i2c.h> -#include <media/audiochip.h> #include <media/v4l2-common.h> #include "cx25840.h" diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 5588b9a5c430..a65b3cc4bf03 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -31,7 +31,6 @@ #include <linux/slab.h> #include <linux/videodev2.h> #include <linux/i2c.h> -#include <media/audiochip.h> #include <media/v4l2-common.h> #include "cx25840.h" @@ -176,9 +175,9 @@ static void cx25840_initialize(struct i2c_client *client, int loadfw) cx25840_write(client, 0x4a5, 0x00); cx25840_write(client, 0x402, 0x00); /* 8. */ - cx25840_write(client, 0x401, 0x18); - cx25840_write(client, 0x4a2, 0x10); - cx25840_write(client, 0x402, 0x04); + cx25840_and_or(client, 0x401, ~0x18, 0); + cx25840_and_or(client, 0x4a2, ~0x10, 0x10); + /* steps 8c and 8d are done in change_input() */ /* 10. */ cx25840_write(client, 0x8d3, 0x1f); cx25840_write(client, 0x8e3, 0x03); @@ -209,6 +208,17 @@ static void input_change(struct i2c_client *client) struct cx25840_state *state = i2c_get_clientdata(client); v4l2_std_id std = cx25840_get_v4lstd(client); + /* Follow step 8c and 8d of section 3.16 in the cx25840 datasheet */ + if (std & V4L2_STD_SECAM) { + cx25840_write(client, 0x402, 0); + } + else { + cx25840_write(client, 0x402, 0x04); + cx25840_write(client, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); + } + cx25840_and_or(client, 0x401, ~0x60, 0); + cx25840_and_or(client, 0x401, ~0x60, 0x60); + /* Note: perhaps V4L2_STD_PAL_M should be handled as V4L2_STD_NTSC instead of V4L2_STD_PAL. Someone needs to test this. */ if (std & V4L2_STD_PAL) { @@ -343,6 +353,15 @@ static int set_v4lstd(struct i2c_client *client, v4l2_std_id std) } } + /* Follow step 9 of section 3.16 in the cx25840 datasheet. + Without this PAL may display a vertical ghosting effect. + This happens for example with the Yuan MPC622. */ + if (fmt >= 4 && fmt < 8) { + /* Set format to NTSC-M */ + cx25840_and_or(client, 0x400, ~0xf, 1); + /* Turn off LCOMB */ + cx25840_and_or(client, 0x47b, ~6, 0); + } cx25840_and_or(client, 0x400, ~0xf, fmt); cx25840_vbi_setup(client); return 0; @@ -359,7 +378,14 @@ v4l2_std_id cx25840_get_v4lstd(struct i2c_client * client) } switch (fmt) { - case 0x1: return V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_KR; + case 0x1: + { + /* if the audio std is A2-M, then this is the South Korean + NTSC standard */ + if (cx25840_read(client, 0x805) == 2) + return V4L2_STD_NTSC_M_KR; + return V4L2_STD_NTSC_M; + } case 0x2: return V4L2_STD_NTSC_M_JP; case 0x3: return V4L2_STD_NTSC_443; case 0x4: return V4L2_STD_PAL; @@ -737,15 +763,6 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, return set_input(client, state->vid_input, input->index); } - case VIDIOC_G_AUDIO: - { - struct v4l2_audio *input = arg; - - memset(input, 0, sizeof(*input)); - input->index = state->aud_input; - break; - } - case VIDIOC_S_FREQUENCY: input_change(client); break; @@ -753,7 +770,6 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, case VIDIOC_G_TUNER: { u8 mode = cx25840_read(client, 0x804); - u8 pref = cx25840_read(client, 0x809) & 0xf; u8 vpres = cx25840_read(client, 0x80a) & 0x10; int val = 0; @@ -773,44 +789,50 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, val |= V4L2_TUNER_SUB_MONO; if (mode == 2 || mode == 4) - val |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; if (mode & 0x10) val |= V4L2_TUNER_SUB_SAP; vt->rxsubchans = val; - - switch (pref) { - case 0: - vt->audmode = V4L2_TUNER_MODE_MONO; - break; - case 1: - case 2: - vt->audmode = V4L2_TUNER_MODE_LANG2; - break; - case 4: - default: - vt->audmode = V4L2_TUNER_MODE_STEREO; - } + vt->audmode = state->audmode; break; } case VIDIOC_S_TUNER: + if (state->radio) + break; + switch (vt->audmode) { case V4L2_TUNER_MODE_MONO: - case V4L2_TUNER_MODE_LANG1: - /* Force PREF_MODE to MONO */ + /* mono -> mono + stereo -> mono + bilingual -> lang1 */ cx25840_and_or(client, 0x809, ~0xf, 0x00); break; case V4L2_TUNER_MODE_STEREO: - /* Force PREF_MODE to STEREO */ + case V4L2_TUNER_MODE_LANG1: + /* mono -> mono + stereo -> stereo + bilingual -> lang1 */ cx25840_and_or(client, 0x809, ~0xf, 0x04); break; + case V4L2_TUNER_MODE_LANG1_LANG2: + /* mono -> mono + stereo -> stereo + bilingual -> lang1/lang2 */ + cx25840_and_or(client, 0x809, ~0xf, 0x07); + break; case V4L2_TUNER_MODE_LANG2: - /* Force PREF_MODE to LANG2 */ + /* mono -> mono + stereo -> stereo + bilingual -> lang2 */ cx25840_and_or(client, 0x809, ~0xf, 0x01); break; + default: + return -EINVAL; } + state->audmode = vt->audmode; break; case VIDIOC_G_FMT: @@ -891,6 +913,7 @@ static int cx25840_detect_client(struct i2c_adapter *adapter, int address, state->aud_input = CX25840_AUDIO8; state->audclk_freq = 48000; state->pvr150_workaround = 0; + state->audmode = V4L2_TUNER_MODE_LANG1; cx25840_initialize(client, 1); diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c index 04d879da7d63..e96fd1f1d6dc 100644 --- a/drivers/media/video/cx25840/cx25840-vbi.c +++ b/drivers/media/video/cx25840/cx25840-vbi.c @@ -151,7 +151,7 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOC_G_FMT: { static u16 lcr2vbi[] = { - 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_TELETEXT_PAL_B, 0, /* 1 */ 0, V4L2_SLICED_WSS_625, 0, /* 4 */ V4L2_SLICED_CAPTION_525, /* 6 */ 0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */ @@ -231,7 +231,7 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) for (i = 7; i <= 23; i++) { for (x = 0; x <= 1; x++) { switch (svbi->service_lines[1-x][i]) { - case V4L2_SLICED_TELETEXT_B: + case V4L2_SLICED_TELETEXT_PAL_B: lcr[i] |= 1 << (4 * x); break; case V4L2_SLICED_WSS_625: @@ -282,7 +282,7 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg) switch (id2) { case 1: - id2 = V4L2_SLICED_TELETEXT_B; + id2 = V4L2_SLICED_TELETEXT_PAL_B; break; case 4: id2 = V4L2_SLICED_WSS_625; diff --git a/drivers/media/video/cx25840/cx25840.h b/drivers/media/video/cx25840/cx25840.h index fd22f30dcc1b..dd70664d1dd9 100644 --- a/drivers/media/video/cx25840/cx25840.h +++ b/drivers/media/video/cx25840/cx25840.h @@ -78,6 +78,7 @@ struct cx25840_state { enum cx25840_video_input vid_input; enum cx25840_audio_input aud_input; u32 audclk_freq; + int audmode; }; /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 87d79df05336..ff0f72340d69 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -16,12 +16,13 @@ config VIDEO_CX88 module will be called cx8800 config VIDEO_CX88_ALSA - tristate "ALSA DMA audio support" + tristate "Conexant 2388x DMA audio support" depends on VIDEO_CX88 && SND && EXPERIMENTAL select SND_PCM ---help--- This is a video4linux driver for direct (DMA) audio on - Conexant 2388x based TV cards. + Conexant 2388x based TV cards using ALSA. + It only works with boards with function 01 enabled. To check if your board supports, use lspci -n. If supported, you should see 1471:8801 or 1471:8811 @@ -50,6 +51,7 @@ config VIDEO_CX88_DVB_ALL_FRONTENDS depends on VIDEO_CX88_DVB select DVB_MT352 select VIDEO_CX88_VP3054 + select DVB_ZL10353 select DVB_OR51132 select DVB_CX22702 select DVB_LGDT330X @@ -81,6 +83,16 @@ config VIDEO_CX88_VP3054 which also require support for the VP-3054 Secondary I2C bus, such at DNTV Live! DVB-T Pro. +config VIDEO_CX88_DVB_ZL10353 + bool "Zarlink ZL10353 DVB-T Support" + default y + depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS + select DVB_ZL10353 + ---help--- + This adds DVB-T support for cards based on the + Connexant 2388x chip and the ZL10353 demodulator, + successor to the Zarlink MT352. + config VIDEO_CX88_DVB_OR51132 bool "OR51132 ATSC Support" default y diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile index 2b902784facc..6482b9aa6a1f 100644 --- a/drivers/media/video/cx88/Makefile +++ b/drivers/media/video/cx88/Makefile @@ -17,6 +17,7 @@ extra-cflags-$(CONFIG_DVB_CX22702) += -DHAVE_CX22702=1 extra-cflags-$(CONFIG_DVB_OR51132) += -DHAVE_OR51132=1 extra-cflags-$(CONFIG_DVB_LGDT330X) += -DHAVE_LGDT330X=1 extra-cflags-$(CONFIG_DVB_MT352) += -DHAVE_MT352=1 +extra-cflags-$(CONFIG_DVB_ZL10353) += -DHAVE_ZL10353=1 extra-cflags-$(CONFIG_DVB_NXT200X) += -DHAVE_NXT200X=1 extra-cflags-$(CONFIG_DVB_CX24123) += -DHAVE_CX24123=1 extra-cflags-$(CONFIG_VIDEO_CX88_VP3054)+= -DHAVE_VP3054_I2C=1 diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 2acccd6d49bc..f9d87b86492c 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -63,7 +63,7 @@ struct cx88_audio_dev { /* audio controls */ int irq; - snd_card_t *card; + struct snd_card *card; spinlock_t reg_lock; @@ -82,7 +82,7 @@ struct cx88_audio_dev { struct cx88_buffer *buf; long opened; - snd_pcm_substream_t *substream; + struct snd_pcm_substream *substream; }; typedef struct cx88_audio_dev snd_cx88_card_t; @@ -96,7 +96,7 @@ typedef struct cx88_audio_dev snd_cx88_card_t; static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; -static snd_card_t *snd_cx88_cards[SNDRV_CARDS]; +static struct snd_card *snd_cx88_cards[SNDRV_CARDS]; module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled."); @@ -303,7 +303,7 @@ static int dsp_buffer_free(snd_cx88_card_t *chip) BUG_ON(!chip->dma_size); dprintk(2,"Freeing buffer\n"); - videobuf_dma_pci_unmap(chip->pci, &chip->dma_risc); + videobuf_pci_dma_unmap(chip->pci, &chip->dma_risc); videobuf_dma_free(&chip->dma_risc); btcx_riscmem_free(chip->pci,&chip->buf->risc); kfree(chip->buf); @@ -320,7 +320,7 @@ static int dsp_buffer_free(snd_cx88_card_t *chip) /* * Digital hardware definition */ -static snd_pcm_hardware_t snd_cx88_digital_hw = { +static struct snd_pcm_hardware snd_cx88_digital_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | @@ -342,16 +342,16 @@ static snd_pcm_hardware_t snd_cx88_digital_hw = { /* * audio pcm capture runtime free */ -static void snd_card_cx88_runtime_free(snd_pcm_runtime_t *runtime) +static void snd_card_cx88_runtime_free(struct snd_pcm_runtime *runtime) { } /* * audio pcm capture open callback */ -static int snd_cx88_pcm_open(snd_pcm_substream_t *substream) +static int snd_cx88_pcm_open(struct snd_pcm_substream *substream) { snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); - snd_pcm_runtime_t *runtime = substream->runtime; + struct snd_pcm_runtime *runtime = substream->runtime; int err; if (test_and_set_bit(0, &chip->opened)) @@ -380,7 +380,7 @@ _error: /* * audio close callback */ -static int snd_cx88_close(snd_pcm_substream_t *substream) +static int snd_cx88_close(struct snd_pcm_substream *substream) { snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); @@ -393,8 +393,8 @@ static int snd_cx88_close(snd_pcm_substream_t *substream) /* * hw_params callback */ -static int snd_cx88_hw_params(snd_pcm_substream_t * substream, - snd_pcm_hw_params_t * hw_params) +static int snd_cx88_hw_params(struct snd_pcm_substream * substream, + struct snd_pcm_hw_params * hw_params) { snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); struct cx88_buffer *buf; @@ -429,7 +429,7 @@ static int snd_cx88_hw_params(snd_pcm_substream_t * substream, videobuf_dma_init_kernel(&buf->vb.dma,PCI_DMA_FROMDEVICE, (PAGE_ALIGN(buf->vb.size) >> PAGE_SHIFT)); - videobuf_dma_pci_map(chip->pci,&buf->vb.dma); + videobuf_pci_dma_map(chip->pci,&buf->vb.dma); cx88_risc_databuffer(chip->pci, &buf->risc, @@ -453,7 +453,7 @@ static int snd_cx88_hw_params(snd_pcm_substream_t * substream, /* * hw free callback */ -static int snd_cx88_hw_free(snd_pcm_substream_t * substream) +static int snd_cx88_hw_free(struct snd_pcm_substream * substream) { snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); @@ -469,7 +469,7 @@ static int snd_cx88_hw_free(snd_pcm_substream_t * substream) /* * prepare callback */ -static int snd_cx88_prepare(snd_pcm_substream_t *substream) +static int snd_cx88_prepare(struct snd_pcm_substream *substream) { return 0; } @@ -478,7 +478,7 @@ static int snd_cx88_prepare(snd_pcm_substream_t *substream) /* * trigger callback */ -static int snd_cx88_card_trigger(snd_pcm_substream_t *substream, int cmd) +static int snd_cx88_card_trigger(struct snd_pcm_substream *substream, int cmd) { snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); int err; @@ -505,10 +505,10 @@ static int snd_cx88_card_trigger(snd_pcm_substream_t *substream, int cmd) /* * pointer callback */ -static snd_pcm_uframes_t snd_cx88_pointer(snd_pcm_substream_t *substream) +static snd_pcm_uframes_t snd_cx88_pointer(struct snd_pcm_substream *substream) { snd_cx88_card_t *chip = snd_pcm_substream_chip(substream); - snd_pcm_runtime_t *runtime = substream->runtime; + struct snd_pcm_runtime *runtime = substream->runtime; if (chip->read_count) { chip->read_count -= snd_pcm_lib_period_bytes(substream); @@ -525,7 +525,7 @@ static snd_pcm_uframes_t snd_cx88_pointer(snd_pcm_substream_t *substream) /* * operators */ -static snd_pcm_ops_t snd_cx88_pcm_ops = { +static struct snd_pcm_ops snd_cx88_pcm_ops = { .open = snd_cx88_pcm_open, .close = snd_cx88_close, .ioctl = snd_pcm_lib_ioctl, @@ -542,7 +542,7 @@ static snd_pcm_ops_t snd_cx88_pcm_ops = { static int __devinit snd_cx88_pcm(snd_cx88_card_t *chip, int device, char *name) { int err; - snd_pcm_t *pcm; + struct snd_pcm *pcm; err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm); if (err < 0) @@ -557,7 +557,8 @@ static int __devinit snd_cx88_pcm(snd_cx88_card_t *chip, int device, char *name) /**************************************************************************** CONTROL INTERFACE ****************************************************************************/ -static int snd_cx88_capture_volume_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *info) +static int snd_cx88_capture_volume_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *info) { info->type = SNDRV_CTL_ELEM_TYPE_INTEGER; info->count = 1; @@ -568,7 +569,8 @@ static int snd_cx88_capture_volume_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_i } /* OK - TODO: test it */ -static int snd_cx88_capture_volume_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *value) +static int snd_cx88_capture_volume_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) { snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); struct cx88_core *core=chip->core; @@ -579,7 +581,8 @@ static int snd_cx88_capture_volume_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_va } /* OK - TODO: test it */ -static int snd_cx88_capture_volume_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *value) +static int snd_cx88_capture_volume_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) { snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol); struct cx88_core *core=chip->core; @@ -595,7 +598,7 @@ static int snd_cx88_capture_volume_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_va return v != old_control; } -static snd_kcontrol_new_t snd_cx88_capture_volume = { +static struct snd_kcontrol_new snd_cx88_capture_volume = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Capture Volume", .info = snd_cx88_capture_volume_info, @@ -641,7 +644,7 @@ static int snd_cx88_free(snd_cx88_card_t *chip) /* * Component Destructor */ -static void snd_cx88_dev_free(snd_card_t * card) +static void snd_cx88_dev_free(struct snd_card * card) { snd_cx88_card_t *chip = card->private_data; @@ -654,8 +657,9 @@ static void snd_cx88_dev_free(snd_card_t * card) */ static int devno; -static int __devinit snd_cx88_create(snd_card_t *card, struct pci_dev *pci, - snd_cx88_card_t **rchip) +static int __devinit snd_cx88_create(struct snd_card *card, + struct pci_dev *pci, + snd_cx88_card_t **rchip) { snd_cx88_card_t *chip; struct cx88_core *core; @@ -672,6 +676,11 @@ static int __devinit snd_cx88_create(snd_card_t *card, struct pci_dev *pci, chip = (snd_cx88_card_t *) card->private_data; core = cx88_core_get(pci); + if (NULL == core) { + err = -EINVAL; + kfree (chip); + return err; + } if (!pci_dma_supported(pci,0xffffffff)) { dprintk(0, "%s/1: Oops: no 32bit PCI DMA ???\n",core->name); @@ -688,11 +697,6 @@ static int __devinit snd_cx88_create(snd_card_t *card, struct pci_dev *pci, spin_lock_init(&chip->reg_lock); cx88_reset(core); - if (NULL == core) { - err = -EINVAL; - kfree (chip); - return err; - } chip->core = core; /* get irq */ @@ -726,7 +730,7 @@ static int __devinit snd_cx88_create(snd_card_t *card, struct pci_dev *pci, static int __devinit cx88_audio_initdev(struct pci_dev *pci, const struct pci_device_id *pci_id) { - snd_card_t *card; + struct snd_card *card; snd_cx88_card_t *chip; int err; diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index a502a4d6e4ae..e100d8ef369a 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1341,7 +1341,7 @@ bb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, enum v4l2_field field) { struct cx8802_fh *fh = q->priv_data; - return cx8802_buf_prepare(fh->dev, (struct cx88_buffer*)vb, field); + return cx8802_buf_prepare(q, fh->dev, (struct cx88_buffer*)vb, field); } static void @@ -1354,8 +1354,7 @@ bb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) static void bb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { - struct cx8802_fh *fh = q->priv_data; - cx88_free_buffer(fh->dev->pci, (struct cx88_buffer*)vb); + cx88_free_buffer(q, (struct cx88_buffer*)vb); } static struct videobuf_queue_ops blackbird_qops = { diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 1bc999247fdc..c7042cf41231 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -184,17 +184,18 @@ struct cx88_board cx88_boards[] = { .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio1 = 0x309f, + .gpio1 = 0xe09f, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio1 = 0x305f, + .gpio1 = 0xe05f, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, - .gpio1 = 0x305f, + .gpio1 = 0xe05f, }}, .radio = { + .gpio1 = 0xe0df, .type = CX88_RADIO, }, }, @@ -322,19 +323,19 @@ struct cx88_board cx88_boards[] = { .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0xff00, + .gpio0 = 0xbff0, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0xff03, + .gpio0 = 0xbff3, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, - .gpio0 = 0xff03, + .gpio0 = 0xbff3, }}, .radio = { .type = CX88_RADIO, - .gpio0 = 0xff00, + .gpio0 = 0xbff0, }, }, [CX88_BOARD_ASUS_PVR_416] = { @@ -1048,6 +1049,50 @@ struct cx88_board cx88_boards[] = { }}, .dvb = 1, }, + [CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT] = { + /* FIXME: Standard video using the cx88 broadcast decoder is + * working, but blackbird isn't working yet, audio is only + * working correctly for television mode. S-Video and Composite + * are working for video-only, so I have them disabled for now. + */ + .name = "KWorld HardwareMpegTV XPert", + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x3de2, + .gpio2 = 0x00ff, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x3de6, + .gpio2 = 0x00ff, + }, + }, + [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID] = { + .name = "DViCO FusionHDTV DVB-T Hybrid", + .tuner_type = TUNER_THOMSON_FE6600, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0000a75f, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0000a75b, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0000a75b, + }}, + .dvb = 1, + }, }; const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards); @@ -1254,6 +1299,18 @@ struct cx88_subid cx88_subids[] = { .subdevice = 0xdb11, .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS, /* Re-branded DViCO: UltraView DVB-T Plus */ + },{ + .subvendor = 0x17de, + .subdevice = 0x0840, + .card = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb40, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID, + },{ + .subvendor = 0x18ac, + .subdevice = 0xdb44, + .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID, }, }; const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids); @@ -1373,6 +1430,40 @@ static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data) } /* ----------------------------------------------------------------------- */ +/* some DViCO specific stuff */ + +static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core) +{ + struct i2c_msg msg = { .addr = 0x45, .flags = 0 }; + int i, err; + static u8 init_bufs[13][5] = { + { 0x10, 0x00, 0x20, 0x01, 0x03 }, + { 0x10, 0x10, 0x01, 0x00, 0x21 }, + { 0x10, 0x10, 0x10, 0x00, 0xCA }, + { 0x10, 0x10, 0x12, 0x00, 0x08 }, + { 0x10, 0x10, 0x13, 0x00, 0x0A }, + { 0x10, 0x10, 0x16, 0x01, 0xC0 }, + { 0x10, 0x10, 0x22, 0x01, 0x3D }, + { 0x10, 0x10, 0x73, 0x01, 0x2E }, + { 0x10, 0x10, 0x72, 0x00, 0xC5 }, + { 0x10, 0x10, 0x71, 0x01, 0x97 }, + { 0x10, 0x10, 0x70, 0x00, 0x0F }, + { 0x10, 0x10, 0xB0, 0x00, 0x01 }, + { 0x03, 0x0C }, + }; + + for (i = 0; i < 13; i++) { + msg.buf = init_bufs[i]; + msg.len = (i != 12 ? 5 : 2); + err = i2c_transfer(&core->i2c_adap, &msg, 1); + if (err != 1) { + printk("dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n", i, err); + return; + } + } +} + +/* ----------------------------------------------------------------------- */ void cx88_card_list(struct cx88_core *core, struct pci_dev *pci) { @@ -1438,11 +1529,15 @@ void cx88_card_setup(struct cx88_core *core) case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: /* GPIO0:0 is hooked to mt352 reset pin */ cx_set(MO_GP0_IO, 0x00000101); cx_clear(MO_GP0_IO, 0x00000001); msleep(1); cx_set(MO_GP0_IO, 0x00000101); + if (0 == core->i2c_rc && + core->board == CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID) + dvico_fusionhdtv_hybrid_init(core); break; case CX88_BOARD_KWORLD_DVB_T: case CX88_BOARD_DNTV_LIVE_DVB_T: @@ -1460,7 +1555,7 @@ void cx88_card_setup(struct cx88_core *core) if (0 == core->i2c_rc) { /* enable tuner */ int i; - u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 }; + static const u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 }; core->i2c_client.addr = 0x0a; for (i = 0; i < 5; i++) diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index 3720f24a25cf..2c3d9f1999be 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -163,7 +163,7 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) / 4 > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); return 0; } @@ -188,7 +188,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) / 4 > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); return 0; } @@ -213,14 +213,13 @@ int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, } void -cx88_free_buffer(struct pci_dev *pci, struct cx88_buffer *buf) +cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf) { - if (in_interrupt()) - BUG(); + BUG_ON(in_interrupt()); videobuf_waiton(&buf->vb,0,0); - videobuf_dma_pci_unmap(pci, &buf->vb.dma); + videobuf_dma_unmap(q, &buf->vb.dma); videobuf_dma_free(&buf->vb.dma); - btcx_riscmem_free(pci, &buf->risc); + btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc); buf->vb.state = STATE_NEEDS_INIT; } @@ -1061,7 +1060,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci) core->pci_bus = pci->bus->number; core->pci_slot = PCI_SLOT(pci->devfn); core->pci_irqmask = 0x00fc00; - init_MUTEX(&core->lock); + mutex_init(&core->lock); core->nr = cx88_devcount++; sprintf(core->name,"cx88[%d]",core->nr); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index e48aa3f6e500..f0ea9b5cdbc2 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -40,6 +40,9 @@ # include "cx88-vp3054-i2c.h" # endif #endif +#ifdef HAVE_ZL10353 +# include "zl10353.h" +#endif #ifdef HAVE_CX22702 # include "cx22702.h" #endif @@ -87,7 +90,7 @@ static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, enum v4l2_field field) { struct cx8802_dev *dev = q->priv_data; - return cx8802_buf_prepare(dev, (struct cx88_buffer*)vb,field); + return cx8802_buf_prepare(q, dev, (struct cx88_buffer*)vb,field); } static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) @@ -98,8 +101,7 @@ static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) static void dvb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { - struct cx8802_dev *dev = q->priv_data; - cx88_free_buffer(dev->pci, (struct cx88_buffer*)vb); + cx88_free_buffer(q, (struct cx88_buffer*)vb); } static struct videobuf_queue_ops dvb_qops = { @@ -111,6 +113,21 @@ static struct videobuf_queue_ops dvb_qops = { /* ------------------------------------------------------------------ */ +#if defined(HAVE_MT352) || defined(HAVE_ZL10353) +static int zarlink_pll_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, + u8 *pllbuf) +{ + struct cx8802_dev *dev = fe->dvb->priv; + + pllbuf[0] = dev->core->pll_addr << 1; + dvb_pll_configure(dev->core->pll_desc, pllbuf + 1, + params->frequency, + params->u.ofdm.bandwidth); + return 0; +} +#endif + #ifdef HAVE_MT352 static int dvico_fusionhdtv_demod_init(struct dvb_frontend* fe) { @@ -176,35 +193,22 @@ static int dntv_live_dvbt_demod_init(struct dvb_frontend* fe) return 0; } -static int mt352_pll_set(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params, - u8* pllbuf) -{ - struct cx8802_dev *dev= fe->dvb->priv; - - pllbuf[0] = dev->core->pll_addr << 1; - dvb_pll_configure(dev->core->pll_desc, pllbuf+1, - params->frequency, - params->u.ofdm.bandwidth); - return 0; -} - static struct mt352_config dvico_fusionhdtv = { .demod_address = 0x0F, .demod_init = dvico_fusionhdtv_demod_init, - .pll_set = mt352_pll_set, + .pll_set = zarlink_pll_set, }; static struct mt352_config dntv_live_dvbt_config = { .demod_address = 0x0f, .demod_init = dntv_live_dvbt_demod_init, - .pll_set = mt352_pll_set, + .pll_set = zarlink_pll_set, }; static struct mt352_config dvico_fusionhdtv_dual = { .demod_address = 0x0F, .demod_init = dvico_dual_demod_init, - .pll_set = mt352_pll_set, + .pll_set = zarlink_pll_set, }; #ifdef HAVE_VP3054_I2C @@ -294,6 +298,46 @@ static struct mt352_config dntv_live_dvbt_pro_config = { #endif #endif +#ifdef HAVE_ZL10353 +static int dvico_hybrid_tune_pll(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, + u8 *pllbuf) +{ + struct cx8802_dev *dev= fe->dvb->priv; + struct i2c_msg msg = + { .addr = dev->core->pll_addr, .flags = 0, + .buf = pllbuf + 1, .len = 4 }; + int err; + + pllbuf[0] = dev->core->pll_addr << 1; + dvb_pll_configure(dev->core->pll_desc, pllbuf + 1, + params->frequency, + params->u.ofdm.bandwidth); + + if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) { + printk(KERN_WARNING "cx88-dvb: %s error " + "(addr %02x <- %02x, err = %i)\n", + __FUNCTION__, pllbuf[0], pllbuf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + + return 0; +} + +static struct zl10353_config dvico_fusionhdtv_hybrid = { + .demod_address = 0x0F, + .pll_set = dvico_hybrid_tune_pll, +}; + +static struct zl10353_config dvico_fusionhdtv_plus_v1_1 = { + .demod_address = 0x0F, + .pll_set = zarlink_pll_set, +}; +#endif + #ifdef HAVE_CX22702 static struct cx22702_config connexant_refboard_config = { .demod_address = 0x43, @@ -500,16 +544,27 @@ static int dvb_register(struct cx8802_dev *dev) &dev->core->i2c_adap); break; #endif +#if defined(HAVE_MT352) || defined(HAVE_ZL10353) + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: + dev->core->pll_addr = 0x60; + dev->core->pll_desc = &dvb_pll_thomson_dtt7579; #ifdef HAVE_MT352 - case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: - dev->core->pll_addr = 0x61; - dev->core->pll_desc = &dvb_pll_lg_z201; dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv, &dev->core->i2c_adap); + if (dev->dvb.frontend != NULL) + break; +#endif +#ifdef HAVE_ZL10353 + /* ZL10353 replaces MT352 on later cards */ + dev->dvb.frontend = zl10353_attach(&dvico_fusionhdtv_plus_v1_1, + &dev->core->i2c_adap); +#endif break; - case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: - dev->core->pll_addr = 0x60; - dev->core->pll_desc = &dvb_pll_thomson_dtt7579; +#endif /* HAVE_MT352 || HAVE_ZL10353 */ +#ifdef HAVE_MT352 + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: + dev->core->pll_addr = 0x61; + dev->core->pll_desc = &dvb_pll_lg_z201; dev->dvb.frontend = mt352_attach(&dvico_fusionhdtv, &dev->core->i2c_adap); break; @@ -540,6 +595,14 @@ static int dvb_register(struct cx8802_dev *dev) &dev->core->i2c_adap); break; #endif +#ifdef HAVE_ZL10353 + case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: + dev->core->pll_addr = 0x61; + dev->core->pll_desc = &dvb_pll_thomson_fe6600; + dev->dvb.frontend = zl10353_attach(&dvico_fusionhdtv_hybrid, + &dev->core->i2c_adap); + break; +#endif #ifdef HAVE_OR51132 case CX88_BOARD_PCHDTV_HD3000: dev->dvb.frontend = or51132_attach(&pchdtv_hd3000, diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 165d948624a3..78a63b7dd380 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -34,337 +34,6 @@ /* ---------------------------------------------------------------------- */ -/* DigitalNow DNTV Live DVB-T Remote */ -static IR_KEYTAB_TYPE ir_codes_dntv_live_dvb_t[IR_KEYTAB_SIZE] = { - [0x00] = KEY_ESC, /* 'go up a level?' */ - /* Keys 0 to 9 */ - [0x0a] = KEY_KP0, - [0x01] = KEY_KP1, - [0x02] = KEY_KP2, - [0x03] = KEY_KP3, - [0x04] = KEY_KP4, - [0x05] = KEY_KP5, - [0x06] = KEY_KP6, - [0x07] = KEY_KP7, - [0x08] = KEY_KP8, - [0x09] = KEY_KP9, - - [0x0b] = KEY_TUNER, /* tv/fm */ - [0x0c] = KEY_SEARCH, /* scan */ - [0x0d] = KEY_STOP, - [0x0e] = KEY_PAUSE, - [0x0f] = KEY_LIST, /* source */ - - [0x10] = KEY_MUTE, - [0x11] = KEY_REWIND, /* backward << */ - [0x12] = KEY_POWER, - [0x13] = KEY_S, /* snap */ - [0x14] = KEY_AUDIO, /* stereo */ - [0x15] = KEY_CLEAR, /* reset */ - [0x16] = KEY_PLAY, - [0x17] = KEY_ENTER, - [0x18] = KEY_ZOOM, /* full screen */ - [0x19] = KEY_FASTFORWARD, /* forward >> */ - [0x1a] = KEY_CHANNELUP, - [0x1b] = KEY_VOLUMEUP, - [0x1c] = KEY_INFO, /* preview */ - [0x1d] = KEY_RECORD, /* record */ - [0x1e] = KEY_CHANNELDOWN, - [0x1f] = KEY_VOLUMEDOWN, -}; - -/* ---------------------------------------------------------------------- */ - -/* IO-DATA BCTV7E Remote */ -static IR_KEYTAB_TYPE ir_codes_iodata_bctv7e[IR_KEYTAB_SIZE] = { - [0x40] = KEY_TV, - [0x20] = KEY_RADIO, /* FM */ - [0x60] = KEY_EPG, - [0x00] = KEY_POWER, - - /* Keys 0 to 9 */ - [0x44] = KEY_KP0, /* 10 */ - [0x50] = KEY_KP1, - [0x30] = KEY_KP2, - [0x70] = KEY_KP3, - [0x48] = KEY_KP4, - [0x28] = KEY_KP5, - [0x68] = KEY_KP6, - [0x58] = KEY_KP7, - [0x38] = KEY_KP8, - [0x78] = KEY_KP9, - - [0x10] = KEY_L, /* Live */ - [0x08] = KEY_T, /* Time Shift */ - - [0x18] = KEY_PLAYPAUSE, /* Play */ - - [0x24] = KEY_ENTER, /* 11 */ - [0x64] = KEY_ESC, /* 12 */ - [0x04] = KEY_M, /* Multi */ - - [0x54] = KEY_VIDEO, - [0x34] = KEY_CHANNELUP, - [0x74] = KEY_VOLUMEUP, - [0x14] = KEY_MUTE, - - [0x4c] = KEY_S, /* SVIDEO */ - [0x2c] = KEY_CHANNELDOWN, - [0x6c] = KEY_VOLUMEDOWN, - [0x0c] = KEY_ZOOM, - - [0x5c] = KEY_PAUSE, - [0x3c] = KEY_C, /* || (red) */ - [0x7c] = KEY_RECORD, /* recording */ - [0x1c] = KEY_STOP, - - [0x41] = KEY_REWIND, /* backward << */ - [0x21] = KEY_PLAY, - [0x61] = KEY_FASTFORWARD, /* forward >> */ - [0x01] = KEY_NEXT, /* skip >| */ -}; - -/* ---------------------------------------------------------------------- */ - -/* ADS Tech Instant TV DVB-T PCI Remote */ -static IR_KEYTAB_TYPE ir_codes_adstech_dvb_t_pci[IR_KEYTAB_SIZE] = { - /* Keys 0 to 9 */ - [0x4d] = KEY_0, - [0x57] = KEY_1, - [0x4f] = KEY_2, - [0x53] = KEY_3, - [0x56] = KEY_4, - [0x4e] = KEY_5, - [0x5e] = KEY_6, - [0x54] = KEY_7, - [0x4c] = KEY_8, - [0x5c] = KEY_9, - - [0x5b] = KEY_POWER, - [0x5f] = KEY_MUTE, - [0x55] = KEY_GOTO, - [0x5d] = KEY_SEARCH, - [0x17] = KEY_EPG, /* Guide */ - [0x1f] = KEY_MENU, - [0x0f] = KEY_UP, - [0x46] = KEY_DOWN, - [0x16] = KEY_LEFT, - [0x1e] = KEY_RIGHT, - [0x0e] = KEY_SELECT, /* Enter */ - [0x5a] = KEY_INFO, - [0x52] = KEY_EXIT, - [0x59] = KEY_PREVIOUS, - [0x51] = KEY_NEXT, - [0x58] = KEY_REWIND, - [0x50] = KEY_FORWARD, - [0x44] = KEY_PLAYPAUSE, - [0x07] = KEY_STOP, - [0x1b] = KEY_RECORD, - [0x13] = KEY_TUNER, /* Live */ - [0x0a] = KEY_A, - [0x12] = KEY_B, - [0x03] = KEY_PROG1, /* 1 */ - [0x01] = KEY_PROG2, /* 2 */ - [0x00] = KEY_PROG3, /* 3 */ - [0x06] = KEY_DVD, - [0x48] = KEY_AUX, /* Photo */ - [0x40] = KEY_VIDEO, - [0x19] = KEY_AUDIO, /* Music */ - [0x0b] = KEY_CHANNELUP, - [0x08] = KEY_CHANNELDOWN, - [0x15] = KEY_VOLUMEUP, - [0x1c] = KEY_VOLUMEDOWN, -}; - -/* ---------------------------------------------------------------------- */ - -/* MSI TV@nywhere remote */ -static IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = { - /* Keys 0 to 9 */ - [0x00] = KEY_0, - [0x01] = KEY_1, - [0x02] = KEY_2, - [0x03] = KEY_3, - [0x04] = KEY_4, - [0x05] = KEY_5, - [0x06] = KEY_6, - [0x07] = KEY_7, - [0x08] = KEY_8, - [0x09] = KEY_9, - - [0x0c] = KEY_MUTE, - [0x0f] = KEY_SCREEN, /* Full Screen */ - [0x10] = KEY_F, /* Funtion */ - [0x11] = KEY_T, /* Time shift */ - [0x12] = KEY_POWER, - [0x13] = KEY_MEDIA, /* MTS */ - [0x14] = KEY_SLOW, - [0x16] = KEY_REWIND, /* backward << */ - [0x17] = KEY_ENTER, /* Return */ - [0x18] = KEY_FASTFORWARD, /* forward >> */ - [0x1a] = KEY_CHANNELUP, - [0x1b] = KEY_VOLUMEUP, - [0x1e] = KEY_CHANNELDOWN, - [0x1f] = KEY_VOLUMEDOWN, -}; - -/* ---------------------------------------------------------------------- */ - -/* Cinergy 1400 DVB-T */ -static IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = { - [0x01] = KEY_POWER, - [0x02] = KEY_1, - [0x03] = KEY_2, - [0x04] = KEY_3, - [0x05] = KEY_4, - [0x06] = KEY_5, - [0x07] = KEY_6, - [0x08] = KEY_7, - [0x09] = KEY_8, - [0x0a] = KEY_9, - [0x0c] = KEY_0, - - [0x0b] = KEY_VIDEO, - [0x0d] = KEY_REFRESH, - [0x0e] = KEY_SELECT, - [0x0f] = KEY_EPG, - [0x10] = KEY_UP, - [0x11] = KEY_LEFT, - [0x12] = KEY_OK, - [0x13] = KEY_RIGHT, - [0x14] = KEY_DOWN, - [0x15] = KEY_TEXT, - [0x16] = KEY_INFO, - - [0x17] = KEY_RED, - [0x18] = KEY_GREEN, - [0x19] = KEY_YELLOW, - [0x1a] = KEY_BLUE, - - [0x1b] = KEY_CHANNELUP, - [0x1c] = KEY_VOLUMEUP, - [0x1d] = KEY_MUTE, - [0x1e] = KEY_VOLUMEDOWN, - [0x1f] = KEY_CHANNELDOWN, - - [0x40] = KEY_PAUSE, - [0x4c] = KEY_PLAY, - [0x58] = KEY_RECORD, - [0x54] = KEY_PREVIOUS, - [0x48] = KEY_STOP, - [0x5c] = KEY_NEXT, -}; - -/* ---------------------------------------------------------------------- */ - -/* AVERTV STUDIO 303 Remote */ -static IR_KEYTAB_TYPE ir_codes_avertv_303[IR_KEYTAB_SIZE] = { - [ 0x2a ] = KEY_KP1, - [ 0x32 ] = KEY_KP2, - [ 0x3a ] = KEY_KP3, - [ 0x4a ] = KEY_KP4, - [ 0x52 ] = KEY_KP5, - [ 0x5a ] = KEY_KP6, - [ 0x6a ] = KEY_KP7, - [ 0x72 ] = KEY_KP8, - [ 0x7a ] = KEY_KP9, - [ 0x0e ] = KEY_KP0, - - [ 0x02 ] = KEY_POWER, - [ 0x22 ] = KEY_VIDEO, - [ 0x42 ] = KEY_AUDIO, - [ 0x62 ] = KEY_ZOOM, - [ 0x0a ] = KEY_TV, - [ 0x12 ] = KEY_CD, - [ 0x1a ] = KEY_TEXT, - - [ 0x16 ] = KEY_SUBTITLE, - [ 0x1e ] = KEY_REWIND, - [ 0x06 ] = KEY_PRINT, - - [ 0x2e ] = KEY_SEARCH, - [ 0x36 ] = KEY_SLEEP, - [ 0x3e ] = KEY_SHUFFLE, - [ 0x26 ] = KEY_MUTE, - - [ 0x4e ] = KEY_RECORD, - [ 0x56 ] = KEY_PAUSE, - [ 0x5e ] = KEY_STOP, - [ 0x46 ] = KEY_PLAY, - - [ 0x6e ] = KEY_RED, - [ 0x0b ] = KEY_GREEN, - [ 0x66 ] = KEY_YELLOW, - [ 0x03 ] = KEY_BLUE, - - [ 0x76 ] = KEY_LEFT, - [ 0x7e ] = KEY_RIGHT, - [ 0x13 ] = KEY_DOWN, - [ 0x1b ] = KEY_UP, -}; - -/* ---------------------------------------------------------------------- */ - -/* DigitalNow DNTV Live! DVB-T Pro Remote */ -static IR_KEYTAB_TYPE ir_codes_dntv_live_dvbt_pro[IR_KEYTAB_SIZE] = { - [ 0x16 ] = KEY_POWER, - [ 0x5b ] = KEY_HOME, - - [ 0x55 ] = KEY_TV, /* live tv */ - [ 0x58 ] = KEY_TUNER, /* digital Radio */ - [ 0x5a ] = KEY_RADIO, /* FM radio */ - [ 0x59 ] = KEY_DVD, /* dvd menu */ - [ 0x03 ] = KEY_1, - [ 0x01 ] = KEY_2, - [ 0x06 ] = KEY_3, - [ 0x09 ] = KEY_4, - [ 0x1d ] = KEY_5, - [ 0x1f ] = KEY_6, - [ 0x0d ] = KEY_7, - [ 0x19 ] = KEY_8, - [ 0x1b ] = KEY_9, - [ 0x0c ] = KEY_CANCEL, - [ 0x15 ] = KEY_0, - [ 0x4a ] = KEY_CLEAR, - [ 0x13 ] = KEY_BACK, - [ 0x00 ] = KEY_TAB, - [ 0x4b ] = KEY_UP, - [ 0x4e ] = KEY_LEFT, - [ 0x4f ] = KEY_OK, - [ 0x52 ] = KEY_RIGHT, - [ 0x51 ] = KEY_DOWN, - [ 0x1e ] = KEY_VOLUMEUP, - [ 0x0a ] = KEY_VOLUMEDOWN, - [ 0x02 ] = KEY_CHANNELDOWN, - [ 0x05 ] = KEY_CHANNELUP, - [ 0x11 ] = KEY_RECORD, - [ 0x14 ] = KEY_PLAY, - [ 0x4c ] = KEY_PAUSE, - [ 0x1a ] = KEY_STOP, - [ 0x40 ] = KEY_REWIND, - [ 0x12 ] = KEY_FASTFORWARD, - [ 0x41 ] = KEY_PREVIOUSSONG, /* replay |< */ - [ 0x42 ] = KEY_NEXTSONG, /* skip >| */ - [ 0x54 ] = KEY_CAMERA, /* capture */ - [ 0x50 ] = KEY_LANGUAGE, /* sap */ - [ 0x47 ] = KEY_TV2, /* pip */ - [ 0x4d ] = KEY_SCREEN, - [ 0x43 ] = KEY_SUBTITLE, - [ 0x10 ] = KEY_MUTE, - [ 0x49 ] = KEY_AUDIO, /* l/r */ - [ 0x07 ] = KEY_SLEEP, - [ 0x08 ] = KEY_VIDEO, /* a/v */ - [ 0x0e ] = KEY_PREVIOUS, /* recall */ - [ 0x45 ] = KEY_ZOOM, /* zoom + */ - [ 0x46 ] = KEY_ANGLE, /* zoom - */ - [ 0x56 ] = KEY_RED, - [ 0x57 ] = KEY_GREEN, - [ 0x5c ] = KEY_YELLOW, - [ 0x5d ] = KEY_BLUE, -}; - -/* ---------------------------------------------------------------------- */ - struct cx88_IR { struct cx88_core *core; struct input_dev *input; @@ -517,6 +186,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->mask_keydown = 0x02; ir->polling = 5; /* ms */ break; + case CX88_BOARD_PROLINK_PLAYTVPVR: case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO: ir_codes = ir_codes_pixelview; ir->gpio_addr = MO_GP1_IO; @@ -524,6 +194,13 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->mask_keyup = 0x80; ir->polling = 1; /* ms */ break; + case CX88_BOARD_KWORLD_LTV883: + ir_codes = ir_codes_pixelview; + ir->gpio_addr = MO_GP1_IO; + ir->mask_keycode = 0x1f; + ir->mask_keyup = 0x60; + ir->polling = 1; /* ms */ + break; case CX88_BOARD_ADSTECH_DVB_T_PCI: ir_codes = ir_codes_adstech_dvb_t_pci; ir->gpio_addr = MO_GP1_IO; diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index c79cc1d2bf8b..7d16888b4a86 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -163,8 +163,8 @@ static int cx8802_restart_queue(struct cx8802_dev *dev, /* ------------------------------------------------------------------ */ -int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf, - enum v4l2_field field) +int cx8802_buf_prepare(struct videobuf_queue *q, struct cx8802_dev *dev, + struct cx88_buffer *buf, enum v4l2_field field) { int size = dev->ts_packet_size * dev->ts_packet_count; int rc; @@ -179,7 +179,7 @@ int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf, buf->vb.size = size; buf->vb.field = field /*V4L2_FIELD_TOP*/; - if (0 != (rc = videobuf_iolock(dev->pci,&buf->vb,NULL))) + if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) goto fail; cx88_risc_databuffer(dev->pci, &buf->risc, buf->vb.dma.sglist, @@ -189,36 +189,36 @@ int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf, return 0; fail: - cx88_free_buffer(dev->pci,buf); + cx88_free_buffer(q,buf); return rc; } void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf) { struct cx88_buffer *prev; - struct cx88_dmaqueue *q = &dev->mpegq; + struct cx88_dmaqueue *cx88q = &dev->mpegq; dprintk( 1, "cx8802_buf_queue\n" ); /* add jump to stopper */ buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); - buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma); - if (list_empty(&q->active)) { + if (list_empty(&cx88q->active)) { dprintk( 0, "queue is empty - first active\n" ); - list_add_tail(&buf->vb.queue,&q->active); - cx8802_start_dma(dev, q, buf); + list_add_tail(&buf->vb.queue,&cx88q->active); + cx8802_start_dma(dev, cx88q, buf); buf->vb.state = STATE_ACTIVE; - buf->count = q->count++; - mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + buf->count = cx88q->count++; + mod_timer(&cx88q->timeout, jiffies+BUFFER_TIMEOUT); dprintk(0,"[%p/%d] %s - first active\n", buf, buf->vb.i, __FUNCTION__); } else { dprintk( 1, "queue is not empty - append to active\n" ); - prev = list_entry(q->active.prev, struct cx88_buffer, vb.queue); - list_add_tail(&buf->vb.queue,&q->active); + prev = list_entry(cx88q->active.prev, struct cx88_buffer, vb.queue); + list_add_tail(&buf->vb.queue,&cx88q->active); buf->vb.state = STATE_ACTIVE; - buf->count = q->count++; + buf->count = cx88q->count++; prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); dprintk( 1, "[%p/%d] %s - append to active\n", buf, buf->vb.i, __FUNCTION__); diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index da8d97ce0c4b..641a0c5a6490 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -885,6 +885,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP); break; case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO); break; } @@ -905,6 +906,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) EN_NICAM_FORCE_MONO2); break; case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: set_audio_standard_NICAM(core, EN_NICAM_FORCE_STEREO); break; @@ -926,6 +928,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) EN_A2_FORCE_MONO2); break; case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: set_audio_standard_A2(core, EN_A2_FORCE_STEREO); break; diff --git a/drivers/media/video/cx88/cx88-vbi.c b/drivers/media/video/cx88/cx88-vbi.c index 9bc6c8995581..846faadc9f1c 100644 --- a/drivers/media/video/cx88/cx88-vbi.c +++ b/drivers/media/video/cx88/cx88-vbi.c @@ -175,7 +175,7 @@ vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, buf->vb.size = size; buf->vb.field = V4L2_FIELD_SEQ_TB; - if (0 != (rc = videobuf_iolock(dev->pci,&buf->vb,NULL))) + if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) goto fail; cx88_risc_buffer(dev->pci, &buf->risc, buf->vb.dma.sglist, @@ -187,7 +187,7 @@ vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, return 0; fail: - cx88_free_buffer(dev->pci,buf); + cx88_free_buffer(q,buf); return rc; } @@ -227,9 +227,8 @@ vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); - struct cx8800_fh *fh = q->priv_data; - cx88_free_buffer(fh->dev->pci,buf); + cx88_free_buffer(q,buf); } struct videobuf_queue_ops cx8800_vbi_qops = { diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 073494ceab0f..72a417b31745 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -227,7 +227,7 @@ static struct cx88_ctrl cx8800_ctls[] = { .minimum = 0x00, .maximum = 0xff, .step = 1, - .default_value = 0, + .default_value = 0x7f, .type = V4L2_CTRL_TYPE_INTEGER, }, .off = 128, @@ -255,7 +255,7 @@ static struct cx88_ctrl cx8800_ctls[] = { .minimum = 0, .maximum = 0xff, .step = 1, - .default_value = 0, + .default_value = 0x7f, .type = V4L2_CTRL_TYPE_INTEGER, }, .off = 128, @@ -300,7 +300,7 @@ static struct cx88_ctrl cx8800_ctls[] = { .minimum = 0, .maximum = 0x3f, .step = 1, - .default_value = 0x1f, + .default_value = 0x3f, .type = V4L2_CTRL_TYPE_INTEGER, }, .reg = AUD_VOL_CTL, @@ -336,17 +336,17 @@ static int res_get(struct cx8800_dev *dev, struct cx8800_fh *fh, unsigned int bi return 1; /* is it free? */ - down(&core->lock); + mutex_lock(&core->lock); if (dev->resources & bit) { /* no, someone else uses it */ - up(&core->lock); + mutex_unlock(&core->lock); return 0; } /* it's free, grab it */ fh->resources |= bit; dev->resources |= bit; dprintk(1,"res: get %d\n",bit); - up(&core->lock); + mutex_unlock(&core->lock); return 1; } @@ -366,14 +366,13 @@ static void res_free(struct cx8800_dev *dev, struct cx8800_fh *fh, unsigned int bits) { struct cx88_core *core = dev->core; - if ((fh->resources & bits) != bits) - BUG(); + BUG_ON((fh->resources & bits) != bits); - down(&core->lock); + mutex_lock(&core->lock); fh->resources &= ~bits; dev->resources &= ~bits; dprintk(1,"res: put %d\n",bits); - up(&core->lock); + mutex_unlock(&core->lock); } /* ------------------------------------------------------------------ */ @@ -565,7 +564,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, if (STATE_NEEDS_INIT == buf->vb.state) { init_buffer = 1; - if (0 != (rc = videobuf_iolock(dev->pci,&buf->vb,NULL))) + if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) goto fail; } @@ -615,7 +614,7 @@ buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, return 0; fail: - cx88_free_buffer(dev->pci,buf); + cx88_free_buffer(q,buf); return rc; } @@ -672,9 +671,8 @@ buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); - struct cx8800_fh *fh = q->priv_data; - cx88_free_buffer(fh->dev->pci,buf); + cx88_free_buffer(q,buf); } static struct videobuf_queue_ops cx8800_video_qops = { @@ -909,7 +907,8 @@ static int get_control(struct cx88_core *core, struct v4l2_control *ctl) value = c->sreg ? cx_sread(c->sreg) : cx_read(c->reg); switch (ctl->id) { case V4L2_CID_AUDIO_BALANCE: - ctl->value = (value & 0x40) ? (value & 0x3f) : (0x40 - (value & 0x3f)); + ctl->value = ((value & 0x7f) < 0x40) ? ((value & 0x7f) + 0x40) + : (0x7f - (value & 0x7f)); break; case V4L2_CID_AUDIO_VOLUME: ctl->value = 0x3f - (value & 0x3f); @@ -918,9 +917,9 @@ static int get_control(struct cx88_core *core, struct v4l2_control *ctl) ctl->value = ((value + (c->off << c->shift)) & c->mask) >> c->shift; break; } - printk("get_control id=0x%X reg=0x%02x val=0x%02x (mask 0x%02x)%s\n", - ctl->id, c->reg, ctl->value, - c->mask, c->sreg ? " [shadowed]" : ""); + dprintk(1,"get_control id=0x%X(%s) ctrl=0x%02x, reg=0x%02x val=0x%02x (mask 0x%02x)%s\n", + ctl->id, c->v.name, ctl->value, c->reg, + value,c->mask, c->sreg ? " [shadowed]" : ""); return 0; } @@ -946,7 +945,7 @@ static int set_control(struct cx88_core *core, struct v4l2_control *ctl) mask=c->mask; switch (ctl->id) { case V4L2_CID_AUDIO_BALANCE: - value = (ctl->value < 0x40) ? (0x40 - ctl->value) : ctl->value; + value = (ctl->value < 0x40) ? (0x7f - ctl->value) : (ctl->value - 0x40); break; case V4L2_CID_AUDIO_VOLUME: value = 0x3f - (ctl->value & 0x3f); @@ -969,9 +968,9 @@ static int set_control(struct cx88_core *core, struct v4l2_control *ctl) value = ((ctl->value - c->off) << c->shift) & c->mask; break; } - printk("set_control id=0x%X reg=0x%02x val=0x%02x (mask 0x%02x)%s\n", - ctl->id, c->reg, value, - mask, c->sreg ? " [shadowed]" : ""); + dprintk(1,"set_control id=0x%X(%s) ctrl=0x%02x, reg=0x%02x val=0x%02x (mask 0x%02x)%s\n", + ctl->id, c->v.name, ctl->value, c->reg, value, + mask, c->sreg ? " [shadowed]" : ""); if (c->sreg) { cx_sandor(c->sreg, c->reg, mask, value); } else { @@ -987,8 +986,7 @@ static void init_controls(struct cx88_core *core) for (i = 0; i < CX8800_CTLS; i++) { ctrl.id=cx8800_ctls[i].v.id; - ctrl.value=cx8800_ctls[i].v.default_value - +cx8800_ctls[i].off; + ctrl.value=cx8800_ctls[i].v.default_value; set_control(core, &ctrl); } } @@ -1252,9 +1250,17 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, { int err; - dprintk( 1, "CORE IOCTL: 0x%x\n", cmd ); - if (video_debug > 1) - v4l_print_ioctl(core->name,cmd); + if (video_debug) { + if (video_debug > 1) { + if (_IOC_DIR(cmd) & _IOC_WRITE) + v4l_printk_ioctl_arg("cx88(w)",cmd, arg); + else if (!_IOC_DIR(cmd) & _IOC_READ) { + v4l_print_ioctl("cx88", cmd); + } + } else + v4l_print_ioctl(core->name,cmd); + + } switch (cmd) { /* ---------- tv norms ---------- */ @@ -1291,9 +1297,9 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, if (i == ARRAY_SIZE(tvnorms)) return -EINVAL; - down(&core->lock); + mutex_lock(&core->lock); cx88_set_tvnorm(core,&tvnorms[i]); - up(&core->lock); + mutex_unlock(&core->lock); return 0; } @@ -1343,10 +1349,10 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, if (*i >= 4) return -EINVAL; - down(&core->lock); + mutex_lock(&core->lock); cx88_newstation(core); video_mux(core,*i); - up(&core->lock); + mutex_unlock(&core->lock); return 0; } @@ -1438,7 +1444,7 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, return -EINVAL; if (1 == radio && f->type != V4L2_TUNER_RADIO) return -EINVAL; - down(&core->lock); + mutex_lock(&core->lock); core->freq = f->frequency; cx88_newstation(core); cx88_call_i2c_clients(core,VIDIOC_S_FREQUENCY,f); @@ -1447,7 +1453,7 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, msleep (10); cx88_set_tvaudio(core); - up(&core->lock); + mutex_unlock(&core->lock); return 0; } @@ -1461,7 +1467,19 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, static int video_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - return video_usercopy(inode, file, cmd, arg, video_do_ioctl); + int retval; + + retval=video_usercopy(inode, file, cmd, arg, video_do_ioctl); + + if (video_debug > 1) { + if (retval < 0) { + v4l_print_ioctl("cx88(err)", cmd); + printk(KERN_DEBUG "cx88(err): errcode=%d\n",retval); + } else if (_IOC_DIR(cmd) & _IOC_READ) + v4l_printk_ioctl_arg("cx88(r)",cmd, (void *)arg); + } + + return retval; } /* ----------------------------------------------------------- */ @@ -1921,11 +1939,11 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, pci_set_drvdata(pci_dev,dev); /* initial device configuration */ - down(&core->lock); + mutex_lock(&core->lock); cx88_set_tvnorm(core,tvnorms); init_controls(core); video_mux(core,0); - up(&core->lock); + mutex_unlock(&core->lock); /* start tvaudio thread */ if (core->tuner_type != TUNER_ABSENT) diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index e9fd55b57fa6..326a25f147f6 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -27,7 +27,6 @@ #include <media/tuner.h> #include <media/tveeprom.h> -#include <media/audiochip.h> #include <media/video-buf.h> #include <media/video-buf-dvb.h> @@ -35,6 +34,7 @@ #include "cx88-reg.h" #include <linux/version.h> +#include <linux/mutex.h> #define CX88_VERSION_CODE KERNEL_VERSION(0,0,5) #ifndef TRUE @@ -62,7 +62,7 @@ /* need "shadow" registers for some write-only ones ... */ #define SHADOW_AUD_VOL_CTL 1 #define SHADOW_AUD_BAL_CTL 2 -#define SHADOW_MAX 2 +#define SHADOW_MAX 3 /* FM Radio deemphasis type */ enum cx88_deemph_type { @@ -187,6 +187,8 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_DNTV_LIVE_DVB_T_PRO 42 #define CX88_BOARD_KWORLD_DVB_T_CX22702 43 #define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL 44 +#define CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT 45 +#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID 46 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, @@ -308,8 +310,7 @@ struct cx88_core { /* IR remote control state */ struct cx88_IR *ir; - struct semaphore lock; - + struct mutex lock; /* various v4l controls */ u32 freq; @@ -483,7 +484,7 @@ extern int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value); extern void -cx88_free_buffer(struct pci_dev *pci, struct cx88_buffer *buf); +cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf); extern void cx88_risc_disasm(struct cx88_core *core, struct btcx_riscmem *risc); @@ -575,8 +576,8 @@ void cx88_ir_irq(struct cx88_core *core); /* ----------------------------------------------------------- */ /* cx88-mpeg.c */ -int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf, - enum v4l2_field field); +int cx8802_buf_prepare(struct videobuf_queue *q,struct cx8802_dev *dev, + struct cx88_buffer *buf, enum v4l2_field field); void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf); void cx8802_cancel_buffers(struct cx8802_dev *dev); diff --git a/drivers/media/video/dabfirmware.h b/drivers/media/video/dabfirmware.h new file mode 100644 index 000000000000..d14d803566a3 --- /dev/null +++ b/drivers/media/video/dabfirmware.h @@ -0,0 +1,1408 @@ +/* + * dabdata.h - dab usb firmware and bitstream data + */ + +static INTEL_HEX_RECORD firmware[] = { + +{ 2, 0x0000, 0, {0x21,0x57} }, +{ 3, 0x0003, 0, {0x02,0x01,0x66} }, +{ 3, 0x000b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0013, 0, {0x02,0x01,0x66} }, +{ 3, 0x001b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0023, 0, {0x02,0x01,0x66} }, +{ 3, 0x002b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0033, 0, {0x02,0x03,0x0f} }, +{ 3, 0x003b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0043, 0, {0x02,0x01,0x00} }, +{ 3, 0x004b, 0, {0x02,0x01,0x66} }, +{ 3, 0x0053, 0, {0x02,0x01,0x66} }, +{ 3, 0x005b, 0, {0x02,0x04,0xbd} }, +{ 3, 0x0063, 0, {0x02,0x01,0x67} }, +{ 3, 0x0100, 0, {0x02,0x0c,0x5a} }, +{ 3, 0x0104, 0, {0x02,0x01,0xed} }, +{ 3, 0x0108, 0, {0x02,0x02,0x51} }, +{ 3, 0x010c, 0, {0x02,0x02,0x7c} }, +{ 3, 0x0110, 0, {0x02,0x02,0xe4} }, +{ 1, 0x0114, 0, {0x32} }, +{ 1, 0x0118, 0, {0x32} }, +{ 3, 0x011c, 0, {0x02,0x05,0xfd} }, +{ 3, 0x0120, 0, {0x02,0x00,0x00} }, +{ 3, 0x0124, 0, {0x02,0x00,0x00} }, +{ 3, 0x0128, 0, {0x02,0x04,0x3c} }, +{ 3, 0x012c, 0, {0x02,0x04,0x6a} }, +{ 3, 0x0130, 0, {0x02,0x00,0x00} }, +{ 3, 0x0134, 0, {0x02,0x00,0x00} }, +{ 3, 0x0138, 0, {0x02,0x00,0x00} }, +{ 3, 0x013c, 0, {0x02,0x00,0x00} }, +{ 3, 0x0140, 0, {0x02,0x00,0x00} }, +{ 3, 0x0144, 0, {0x02,0x00,0x00} }, +{ 3, 0x0148, 0, {0x02,0x00,0x00} }, +{ 3, 0x014c, 0, {0x02,0x00,0x00} }, +{ 3, 0x0150, 0, {0x02,0x00,0x00} }, +{ 3, 0x0154, 0, {0x02,0x00,0x00} }, +{ 10, 0x0157, 0, {0x75,0x81,0x7f,0xe5,0x82,0x60,0x03,0x02,0x01,0x61} }, +{ 5, 0x0161, 0, {0x12,0x07,0x6f,0x21,0x64} }, +{ 1, 0x0166, 0, {0x32} }, +{ 14, 0x0167, 0, {0xc0,0xd0,0xc0,0x86,0xc0,0x82,0xc0,0x83,0xc0,0xe0,0x90,0x7f,0x97,0xe0} }, +{ 14, 0x0175, 0, {0x44,0x80,0xf0,0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x0183, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x0191, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x90,0x7f,0x97,0xe0} }, +{ 3, 0x019f, 0, {0x55,0x7f,0xf0} }, +{ 14, 0x01a2, 0, {0x90,0x7f,0x9a,0xe0,0x30,0xe4,0x23,0x90,0x7f,0x68,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x01b0, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x01be, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, +{ 14, 0x01cc, 0, {0xe5,0xd8,0xc2,0xe3,0xf5,0xd8,0xd0,0xe0,0xd0,0x83,0xd0,0x82,0xd0,0x86} }, +{ 3, 0x01da, 0, {0xd0,0xd0,0x32} }, +{ 8, 0x01dd, 0, {0x75,0x86,0x00,0x90,0xff,0xc3,0x7c,0x05} }, +{ 7, 0x01e5, 0, {0xa3,0xe5,0x82,0x45,0x83,0x70,0xf9} }, +{ 1, 0x01ec, 0, {0x22} }, +{ 14, 0x01ed, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0xd0} }, +{ 14, 0x01fb, 0, {0x75,0xd0,0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91} }, +{ 13, 0x0209, 0, {0x90,0x88,0x00,0xe0,0xf5,0x41,0x90,0x7f,0xab,0x74,0x02,0xf0,0x90} }, +{ 9, 0x0216, 0, {0x7f,0xab,0x74,0x02,0xf0,0xe5,0x32,0x60,0x21} }, +{ 4, 0x021f, 0, {0x7a,0x00,0x7b,0x00} }, +{ 11, 0x0223, 0, {0xc3,0xea,0x94,0x18,0xeb,0x64,0x80,0x94,0x80,0x50,0x12} }, +{ 14, 0x022e, 0, {0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x0a,0xba,0x00} }, +{ 2, 0x023c, 0, {0x01,0x0b} }, +{ 2, 0x023e, 0, {0x80,0xe3} }, +{ 2, 0x0240, 0, {0xd0,0x86} }, +{ 14, 0x0242, 0, {0xd0,0xd0,0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0} }, +{ 1, 0x0250, 0, {0x32} }, +{ 14, 0x0251, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x025f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} }, +{ 4, 0x026d, 0, {0x04,0xf0,0xd0,0x86} }, +{ 11, 0x0271, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x027c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x028a, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 13, 0x0298, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, +{ 12, 0x02a5, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0x6e,0x00,0x75,0x6f,0x02,0x12} }, +{ 6, 0x02b1, 0, {0x11,0x44,0x75,0x70,0x39,0x75} }, +{ 6, 0x02b7, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} }, +{ 12, 0x02bd, 0, {0x11,0x75,0x90,0x7f,0xd6,0xe4,0xf0,0x75,0xd8,0x20,0xd0,0x86} }, +{ 14, 0x02c9, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x02d7, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x02e4, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x02f2, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} }, +{ 4, 0x0300, 0, {0x10,0xf0,0xd0,0x86} }, +{ 11, 0x0304, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x030f, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x031d, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 12, 0x032b, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0x75,0x6e,0x00,0x75,0x6f,0x02} }, +{ 7, 0x0337, 0, {0x12,0x11,0x44,0x75,0x70,0x40,0x75} }, +{ 6, 0x033e, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} }, +{ 14, 0x0344, 0, {0x11,0x75,0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0} }, +{ 5, 0x0352, 0, {0x75,0xd8,0x10,0xd0,0x86} }, +{ 14, 0x0357, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x0365, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 13, 0x0372, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} }, +{ 12, 0x037f, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x42,0xf0,0x12,0x10,0x1b,0x90} }, +{ 13, 0x038b, 0, {0x7f,0xa6,0xe5,0x43,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40} }, +{ 1, 0x0398, 0, {0xf0} }, +{ 1, 0x0399, 0, {0x22} }, +{ 13, 0x039a, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} }, +{ 12, 0x03a7, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x44,0xf0,0x12,0x10,0x1b,0x90} }, +{ 12, 0x03b3, 0, {0x7f,0xa6,0xe5,0x45,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0xe5} }, +{ 11, 0x03bf, 0, {0x46,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40,0xf0} }, +{ 1, 0x03ca, 0, {0x22} }, +{ 10, 0x03cb, 0, {0x75,0x44,0x02,0x75,0x45,0x00,0x75,0x46,0x00,0x12} }, +{ 9, 0x03d5, 0, {0x03,0x9a,0x75,0x42,0x03,0x75,0x43,0x00,0x12} }, +{ 2, 0x03de, 0, {0x03,0x72} }, +{ 1, 0x03e0, 0, {0x22} }, +{ 12, 0x03e1, 0, {0x90,0x88,0x00,0xe5,0x36,0xf0,0x90,0x88,0x00,0x74,0x10,0x25} }, +{ 9, 0x03ed, 0, {0x36,0xf0,0x12,0x01,0xdd,0x75,0x42,0x01,0x75} }, +{ 9, 0x03f6, 0, {0x43,0x18,0x12,0x03,0x72,0x75,0x44,0x02,0x75} }, +{ 9, 0x03ff, 0,{0x45,0x00,0x75,0x46,0x00,0x12,0x03,0x9a,0x75} }, +{ 8, 0x0408, 0,{0x42,0x03,0x75,0x43,0x44,0x12,0x03,0x72} }, +{ 1, 0x0410, 0,{0x22} }, +{ 14, 0x0411, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x041f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} }, +{ 4, 0x042d, 0, {0x02,0xf0,0xd0,0x86} }, +{ 11, 0x0431, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x043c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x044a, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xa9,0x74} }, +{ 7, 0x0458, 0, {0x04,0xf0,0x75,0x30,0x01,0xd0,0x86} }, +{ 11, 0x045f, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x046a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 14, 0x0478, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} }, +{ 7, 0x0486, 0, {0x04,0xf0,0x75,0x31,0x01,0xd0,0x86} }, +{ 11, 0x048d, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x0498, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 12, 0x04a6, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe5,0xf5,0x91,0xd0,0x86} }, +{ 11, 0x04b2, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x04bd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, +{ 12, 0x04cb, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe7,0xf5,0x91,0xd0,0x86} }, +{ 11, 0x04d7, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 12, 0x04e2, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x20,0x90,0x7f,0x96,0xe4,0xf0} }, +{ 1, 0x04ee, 0, {0x22} }, +{ 7, 0x04ef, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x21} }, +{ 1, 0x04f6, 0, {0x22} }, +{ 14, 0x04f7, 0, {0x90,0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xe0,0xfb,0x74,0x80,0x2a,0xfa} }, +{ 14, 0x0505, 0, {0x74,0x80,0x2b,0xfb,0xea,0x03,0x03,0x54,0x3f,0xfc,0xea,0xc4,0x23,0x54} }, +{ 14, 0x0513, 0, {0x1f,0xfa,0x2c,0xfa,0xeb,0x03,0x03,0x54,0x3f,0xfc,0xeb,0xc4,0x23,0x54} }, +{ 11, 0x0521, 0, {0x1f,0xfb,0x2c,0xfb,0x90,0x17,0x0a,0xe0,0xfc,0x60,0x02} }, +{ 2, 0x052c, 0, {0x7a,0x00} }, +{ 7, 0x052e, 0, {0x90,0x17,0x0c,0xe0,0xfc,0x60,0x02} }, +{ 2, 0x0535, 0, {0x7b,0x00} }, +{ 11, 0x0537, 0, {0xea,0x2b,0xfc,0xc3,0x13,0xf5,0x3a,0x75,0x44,0x02,0x8b} }, +{ 7, 0x0542, 0, {0x45,0x8a,0x46,0x12,0x03,0x9a,0x75} }, +{ 9, 0x0549, 0, {0x6e,0x08,0x75,0x6f,0x00,0x12,0x11,0x44,0x75} }, +{ 4, 0x0552, 0, {0x70,0x47,0x75,0x71} }, +{ 8, 0x0556, 0, {0x0c,0x75,0x72,0x02,0x12,0x11,0x75,0x85} }, +{ 5, 0x055e, 0, {0x3a,0x73,0x12,0x11,0xa0} }, +{ 1, 0x0563, 0, {0x22} }, +{ 14, 0x0564, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} }, +{ 14, 0x0572, 0, {0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xef,0xe0,0xfc} }, +{ 14, 0x0580, 0, {0x33,0x95,0xe0,0xfd,0x8c,0x05,0x7c,0x00,0x90,0x7f,0xee,0xe0,0xfe,0x33} }, +{ 14, 0x058e, 0, {0x95,0xe0,0xff,0xec,0x2e,0xfc,0xed,0x3f,0xfd,0x90,0x7f,0xe9,0xe0,0xfe} }, +{ 5, 0x059c, 0, {0xbe,0x01,0x02,0x80,0x03} }, +{ 3, 0x05a1, 0, {0x02,0x05,0xf9} }, +{ 6, 0x05a4, 0, {0xbc,0x01,0x21,0xbd,0x00,0x1e} }, +{ 14, 0x05aa, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfc,0xeb,0x25,0xe0,0xfd,0x2c,0x24,0x00,0xfc} }, +{ 14, 0x05b8, 0, {0xe4,0x34,0x17,0xfd,0x90,0x7e,0xc0,0xe0,0xfe,0x8c,0x82,0x8d,0x83,0xf0} }, +{ 2, 0x05c6, 0, {0x80,0x31} }, +{ 14, 0x05c8, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfa,0xeb,0x25,0xe0,0xfb,0x2a,0xfa,0x24,0x00} }, +{ 14, 0x05d6, 0, {0xfb,0xe4,0x34,0x17,0xfc,0x90,0x7e,0xc0,0xe0,0xfd,0x8b,0x82,0x8c,0x83} }, +{ 14, 0x05e4, 0, {0xf0,0x74,0x01,0x2a,0x24,0x00,0xfa,0xe4,0x34,0x17,0xfb,0x90,0x7e,0xc1} }, +{ 7, 0x05f2, 0, {0xe0,0xfc,0x8a,0x82,0x8b,0x83,0xf0} }, +{ 3, 0x05f9, 0, {0x75,0x38,0x01} }, +{ 1, 0x05fc, 0, {0x22} }, +{ 14, 0x05fd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x060b, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 13, 0x0619, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, +{ 13, 0x0626, 0, {0x7f,0xaa,0x74,0x01,0xf0,0x12,0x05,0x64,0x75,0x37,0x00,0xd0,0x86} }, +{ 14, 0x0633, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x0641, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 14, 0x064e, 0, {0x90,0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xee,0xe0} }, +{ 14, 0x065c, 0, {0xfc,0x33,0x95,0xe0,0xfd,0x90,0x7f,0x96,0xe0,0xfe,0x90,0x7f,0x96,0x74} }, +{ 14, 0x066a, 0, {0x80,0x65,0x06,0xf0,0x90,0x7f,0x00,0x74,0x01,0xf0,0xea,0xc4,0x03,0x54} }, +{ 14, 0x0678, 0, {0xf8,0xfe,0xeb,0x25,0xe0,0xfb,0x2e,0xfe,0x24,0x00,0xfb,0xe4,0x34,0x17} }, +{ 14, 0x0686, 0, {0xff,0x8b,0x82,0x8f,0x83,0xe0,0xfb,0x74,0x01,0x2e,0x24,0x00,0xfe,0xe4} }, +{ 14, 0x0694, 0, {0x34,0x17,0xff,0x8e,0x82,0x8f,0x83,0xe0,0xfe,0x90,0x7f,0xe9,0xe0,0xff} }, +{ 3, 0x06a2, 0, {0xbf,0x81,0x0a} }, +{ 10, 0x06a5, 0, {0x90,0x7f,0x00,0xeb,0xf0,0x90,0x7f,0x01,0xee,0xf0} }, +{ 8, 0x06af, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x82,0x1a} }, +{ 3, 0x06b7, 0, {0xba,0x01,0x0c} }, +{ 12, 0x06ba, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} }, +{ 11, 0x06c6, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0xb5,0xf0} }, +{ 8, 0x06d1, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x83,0x1b} }, +{ 3, 0x06d9, 0, {0xba,0x01,0x0d} }, +{ 13, 0x06dc, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} }, +{ 11, 0x06e9, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0x12,0xf0} }, +{ 8, 0x06f4, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x84,0x1c} }, +{ 3, 0x06fc, 0, {0xba,0x01,0x0d} }, +{ 13, 0x06ff, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0c} }, +{ 12, 0x070c, 0, {0x90,0x7f,0x00,0x74,0x80,0xf0,0x90,0x7f,0x01,0x74,0x01,0xf0} }, +{ 5, 0x0718, 0, {0x90,0x7f,0xb5,0xec,0xf0} }, +{ 1, 0x071d, 0, {0x22} }, +{ 12, 0x071e, 0, {0x75,0x36,0x0d,0x90,0x88,0x00,0x74,0x1d,0xf0,0x75,0x6b,0x80} }, +{ 10, 0x072a, 0, {0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, +{ 9, 0x0734, 0, {0x6c,0x0f,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, +{ 9, 0x073d, 0, {0x6c,0x06,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, +{ 7, 0x0746, 0, {0x6c,0x01,0x12,0x10,0xe2,0x7a,0x00} }, +{ 3, 0x074d, 0, {0xba,0xff,0x00} }, +{ 2, 0x0750, 0, {0x50,0x0a} }, +{ 10, 0x0752, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} }, +{ 10, 0x075c, 0, {0x75,0x6b,0x80,0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75} }, +{ 8, 0x0766, 0, {0x6b,0x80,0x75,0x6c,0x0f,0x12,0x10,0xe2} }, +{ 1, 0x076e, 0, {0x22} }, +{ 14, 0x076f, 0, {0x90,0x7f,0xa1,0xe4,0xf0,0x90,0x7f,0xaf,0x74,0x01,0xf0,0x90,0x7f,0x92} }, +{ 14, 0x077d, 0, {0x74,0x02,0xf0,0x75,0x8e,0x31,0x75,0x89,0x21,0x75,0x88,0x00,0x75,0xc8} }, +{ 14, 0x078b, 0, {0x00,0x75,0x8d,0x40,0x75,0x98,0x40,0x75,0xc0,0x40,0x75,0x87,0x00,0x75} }, +{ 9, 0x0799, 0, {0x20,0x00,0x75,0x21,0x00,0x75,0x22,0x00,0x75} }, +{ 5, 0x07a2, 0, {0x23,0x00,0x75,0x47,0x00} }, +{ 7, 0x07a7, 0, {0xc3,0xe5,0x47,0x94,0x20,0x50,0x11} }, +{ 13, 0x07ae, 0, {0xe5,0x47,0x24,0x00,0xf5,0x82,0xe4,0x34,0x17,0xf5,0x83,0xe4,0xf0} }, +{ 4, 0x07bb, 0, {0x05,0x47,0x80,0xe8} }, +{ 9, 0x07bf, 0, {0xe4,0xf5,0x40,0xf5,0x3f,0xe4,0xf5,0x3c,0xf5} }, +{ 7, 0x07c8, 0, {0x3b,0xe4,0xf5,0x3e,0xf5,0x3d,0x75} }, +{ 11, 0x07cf, 0, {0x32,0x00,0x75,0x37,0x00,0x75,0x39,0x00,0x90,0x7f,0x93} }, +{ 14, 0x07da, 0, {0x74,0x3c,0xf0,0x90,0x7f,0x9c,0x74,0xff,0xf0,0x90,0x7f,0x96,0x74,0x80} }, +{ 14, 0x07e8, 0, {0xf0,0x90,0x7f,0x94,0x74,0x70,0xf0,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} }, +{ 14, 0x07f6, 0, {0x7f,0x97,0xe4,0xf0,0x90,0x7f,0x95,0x74,0xc2,0xf0,0x90,0x7f,0x98,0x74} }, +{ 14, 0x0804, 0, {0x28,0xf0,0x90,0x7f,0x9e,0x74,0x28,0xf0,0x90,0x7f,0xf0,0xe4,0xf0,0x90} }, +{ 14, 0x0812, 0, {0x7f,0xf1,0xe4,0xf0,0x90,0x7f,0xf2,0xe4,0xf0,0x90,0x7f,0xf3,0xe4,0xf0} }, +{ 14, 0x0820, 0, {0x90,0x7f,0xf4,0xe4,0xf0,0x90,0x7f,0xf5,0xe4,0xf0,0x90,0x7f,0xf6,0xe4} }, +{ 14, 0x082e, 0, {0xf0,0x90,0x7f,0xf7,0xe4,0xf0,0x90,0x7f,0xf8,0xe4,0xf0,0x90,0x7f,0xf9} }, +{ 14, 0x083c, 0, {0x74,0x38,0xf0,0x90,0x7f,0xfa,0x74,0xa0,0xf0,0x90,0x7f,0xfb,0x74,0xa0} }, +{ 14, 0x084a, 0, {0xf0,0x90,0x7f,0xfc,0x74,0xa0,0xf0,0x90,0x7f,0xfd,0x74,0xa0,0xf0,0x90} }, +{ 14, 0x0858, 0, {0x7f,0xfe,0x74,0xa0,0xf0,0x90,0x7f,0xff,0x74,0xa0,0xf0,0x90,0x7f,0xe0} }, +{ 14, 0x0866, 0, {0x74,0x03,0xf0,0x90,0x7f,0xe1,0x74,0x01,0xf0,0x90,0x7f,0xdd,0x74,0x80} }, +{ 11, 0x0874, 0, {0xf0,0x12,0x12,0x43,0x12,0x07,0x1e,0x7a,0x00,0x7b,0x00} }, +{ 9, 0x087f, 0, {0xc3,0xea,0x94,0x1e,0xeb,0x94,0x00,0x50,0x17} }, +{ 12, 0x0888, 0, {0x90,0x88,0x00,0xe0,0xf5,0x47,0x90,0x88,0x0b,0xe0,0xf5,0x47} }, +{ 9, 0x0894, 0, {0x90,0x7f,0x68,0xf0,0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x089d, 0, {0x80,0xe0} }, +{ 12, 0x089f, 0, {0x12,0x03,0xe1,0x90,0x7f,0xd6,0xe4,0xf0,0x7a,0x00,0x7b,0x00} }, +{ 13, 0x08ab, 0, {0x8a,0x04,0x8b,0x05,0xc3,0xea,0x94,0xe0,0xeb,0x94,0x2e,0x50,0x1a} }, +{ 14, 0x08b8, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, +{ 10, 0x08c6, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x08d0, 0, {0x80,0xd9} }, +{ 13, 0x08d2, 0, {0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0,0x90} }, +{ 14, 0x08df, 0, {0x7f,0xde,0x74,0x05,0xf0,0x90,0x7f,0xdf,0x74,0x05,0xf0,0x90,0x7f,0xac} }, +{ 14, 0x08ed, 0, {0xe4,0xf0,0x90,0x7f,0xad,0x74,0x05,0xf0,0x75,0xa8,0x80,0x75,0xf8,0x10} }, +{ 13, 0x08fb, 0, {0x90,0x7f,0xae,0x74,0x0b,0xf0,0x90,0x7f,0xe2,0x74,0x88,0xf0,0x90} }, +{ 12, 0x0908, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0xe8,0x11,0x75,0x32,0x01,0x75} }, +{ 12, 0x0914, 0, {0x31,0x00,0x75,0x30,0x00,0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7} }, +{ 10, 0x0920, 0, {0xd0,0x05,0xd0,0x04,0x75,0x34,0x00,0x75,0x35,0x01} }, +{ 13, 0x092a, 0, {0x90,0x7f,0xae,0x74,0x03,0xf0,0x8c,0x02,0xba,0x00,0x02,0x80,0x03} }, +{ 3, 0x0937, 0, {0x02,0x0a,0x3f} }, +{ 12, 0x093a, 0, {0x85,0x33,0x34,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90,0x7f,0x97} }, +{ 14, 0x0946, 0, {0x74,0x08,0xf0,0x90,0x7f,0x9d,0x74,0x88,0xf0,0x90,0x7f,0x9a,0xe0,0xfa} }, +{ 12, 0x0954, 0, {0x74,0x05,0x5a,0xf5,0x33,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} }, +{ 13, 0x0960, 0, {0x7f,0x97,0x74,0x02,0xf0,0x90,0x7f,0x9d,0x74,0x82,0xf0,0xe5,0x33} }, +{ 13, 0x096d, 0, {0x25,0xe0,0xfa,0x90,0x7f,0x9a,0xe0,0x54,0x05,0xfb,0x4a,0xf5,0x33} }, +{ 2, 0x097a, 0, {0x60,0x0c} }, +{ 12, 0x097c, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x4a,0xf0} }, +{ 11, 0x0988, 0, {0x75,0x6e,0x00,0x75,0x6f,0x00,0xc0,0x04,0xc0,0x05,0x12} }, +{ 14, 0x0993, 0, {0x11,0x44,0xd0,0x05,0xd0,0x04,0x90,0x17,0x13,0xe0,0xfa,0x74,0x80,0x2a} }, +{ 6, 0x09a1, 0, {0xfa,0xe5,0x33,0xb4,0x04,0x29} }, +{ 3, 0x09a7, 0, {0xba,0xa0,0x00} }, +{ 2, 0x09aa, 0, {0x50,0x24} }, +{ 13, 0x09ac, 0, {0x90,0x17,0x13,0xe0,0x04,0xfb,0x0b,0x90,0x17,0x13,0xeb,0xf0,0x90} }, +{ 14, 0x09b9, 0, {0x17,0x13,0xe0,0xfb,0x90,0x17,0x15,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05} }, +{ 9, 0x09c7, 0, {0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02} }, +{ 5, 0x09d0, 0, {0xe5,0x33,0xb4,0x02,0x26} }, +{ 6, 0x09d5, 0, {0xc3,0x74,0x04,0x9a,0x50,0x20} }, +{ 13, 0x09db, 0, {0x90,0x17,0x13,0xe0,0xfa,0x1a,0x1a,0x90,0x17,0x13,0xea,0xf0,0x90} }, +{ 13, 0x09e8, 0, {0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xf0,0xc0,0x04,0xc0,0x05,0x12} }, +{ 6, 0x09f5, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04} }, +{ 5, 0x09fb, 0, {0xe5,0x33,0xb4,0x08,0x1d} }, +{ 4, 0x0a00, 0, {0xe5,0x34,0x70,0x19} }, +{ 10, 0x0a04, 0, {0x74,0x01,0x25,0x35,0x54,0x0f,0xf5,0x35,0x85,0x35} }, +{ 12, 0x0a0e, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} }, +{ 3, 0x0a1a, 0, {0x05,0xd0,0x04} }, +{ 5, 0x0a1d, 0, {0xe5,0x33,0xb4,0x01,0x1d} }, +{ 4, 0x0a22, 0, {0xe5,0x34,0x70,0x19} }, +{ 10, 0x0a26, 0, {0xe5,0x35,0x24,0xff,0x54,0x0f,0xf5,0x35,0x85,0x35} }, +{ 12, 0x0a30, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} }, +{ 3, 0x0a3c, 0, {0x05,0xd0,0x04} }, +{ 14, 0x0a3f, 0, {0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0,0x04,0x90,0x7f,0x96} }, +{ 14, 0x0a4d, 0, {0xe0,0xfa,0x90,0x7f,0x96,0x74,0x7f,0x5a,0xf0,0x90,0x7f,0x97,0x74,0x08} }, +{ 10, 0x0a5b, 0, {0xf0,0xc3,0xec,0x94,0x00,0xed,0x94,0x02,0x40,0x08} }, +{ 8, 0x0a65, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x20,0xe6,0x08} }, +{ 8, 0x0a6d, 0, {0xc3,0xe4,0x9c,0x74,0x08,0x9d,0x50,0x13} }, +{ 14, 0x0a75, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x40,0x65,0x02,0xf0,0x7c} }, +{ 5, 0x0a83, 0, {0x00,0x7d,0x00,0x80,0x05} }, +{ 5, 0x0a88, 0, {0x0c,0xbc,0x00,0x01,0x0d} }, +{ 5, 0x0a8d, 0, {0xe5,0x38,0xb4,0x01,0x0e} }, +{ 13, 0x0a92, 0, {0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0x75,0x38} }, +{ 1, 0x0a9f, 0, {0x00} }, +{ 7, 0x0aa0, 0, {0xe5,0x31,0x70,0x03,0x02,0x09,0x2a} }, +{ 10, 0x0aa7, 0, {0x90,0x7f,0xc9,0xe0,0xfa,0x70,0x03,0x02,0x0c,0x2d} }, +{ 14, 0x0ab1, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} }, +{ 9, 0x0abf, 0, {0x7d,0xc0,0xe0,0xfa,0xba,0x2c,0x02,0x80,0x03} }, +{ 3, 0x0ac8, 0, {0x02,0x0b,0x36} }, +{ 5, 0x0acb, 0, {0x75,0x32,0x00,0x7b,0x00} }, +{ 3, 0x0ad0, 0, {0xbb,0x64,0x00} }, +{ 2, 0x0ad3, 0, {0x50,0x1c} }, +{ 14, 0x0ad5, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, +{ 13, 0x0ae3, 0, {0x04,0xd0,0x03,0xd0,0x02,0x90,0x88,0x0f,0xe0,0xf5,0x47,0x0b,0x80} }, +{ 1, 0x0af0, 0, {0xdf} }, +{ 13, 0x0af1, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x07,0x1e,0x12,0x03,0xe1,0x12} }, +{ 12, 0x0afe, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x75,0x6e,0x00,0x75} }, +{ 13, 0x0b0a, 0, {0x6f,0x01,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0x44,0xd0,0x05} }, +{ 9, 0x0b17, 0, {0xd0,0x04,0xd0,0x02,0x75,0x70,0x4d,0x75,0x71} }, +{ 11, 0x0b20, 0, {0x0c,0x75,0x72,0x02,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} }, +{ 11, 0x0b2b, 0, {0x11,0x75,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0b36, 0, {0xba,0x2a,0x3b} }, +{ 13, 0x0b39, 0, {0x90,0x7f,0x98,0x74,0x20,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} }, +{ 14, 0x0b46, 0, {0x01,0xdd,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x90,0x7f,0x98,0x74,0x28,0xf0} }, +{ 2, 0x0b54, 0, {0x7b,0x00} }, +{ 3, 0x0b56, 0, {0xbb,0x0a,0x00} }, +{ 5, 0x0b59, 0, {0x40,0x03,0x02,0x0c,0x2d} }, +{ 14, 0x0b5e, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, +{ 8, 0x0b6c, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0b,0x80,0xe2} }, +{ 3, 0x0b74, 0, {0xba,0x2b,0x1a} }, +{ 8, 0x0b77, 0, {0x90,0x7f,0xc9,0xe0,0xfb,0xbb,0x40,0x12} }, +{ 14, 0x0b7f, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x12,0x05,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 4, 0x0b8d, 0, {0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0b91, 0, {0xba,0x10,0x1f} }, +{ 14, 0x0b94, 0, {0x90,0x7f,0x96,0xe0,0xfb,0x90,0x7f,0x96,0x74,0x80,0x65,0x03,0xf0,0xc0} }, +{ 14, 0x0ba2, 0, {0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x3d,0xd0,0x05,0xd0,0x04,0xd0,0x02} }, +{ 3, 0x0bb0, 0, {0x02,0x0c,0x2d} }, +{ 3, 0x0bb3, 0, {0xba,0x11,0x12} }, +{ 14, 0x0bb6, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x6a,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 4, 0x0bc4, 0, {0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0bc8, 0, {0xba,0x12,0x12} }, +{ 14, 0x0bcb, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x8f,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 4, 0x0bd9, 0, {0x02,0x02,0x0c,0x2d} }, +{ 3, 0x0bdd, 0, {0xba,0x13,0x0b} }, +{ 11, 0x0be0, 0, {0x90,0x7d,0xc1,0xe0,0xfb,0x90,0x88,0x00,0xf0,0x80,0x42} }, +{ 3, 0x0beb, 0, {0xba,0x14,0x11} }, +{ 14, 0x0bee, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0xdd,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 3, 0x0bfc, 0, {0x02,0x80,0x2e} }, +{ 3, 0x0bff, 0, {0xba,0x15,0x1d} }, +{ 12, 0x0c02, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x75,0x90,0x7d,0xc2,0xe0,0xf5,0x76} }, +{ 14, 0x0c0e, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0,0x05,0xd0,0x04,0xd0} }, +{ 3, 0x0c1c, 0, {0x02,0x80,0x0e} }, +{ 3, 0x0c1f, 0, {0xba,0x16,0x0b} }, +{ 11, 0x0c22, 0, {0xc0,0x04,0xc0,0x05,0x12,0x13,0xa3,0xd0,0x05,0xd0,0x04} }, +{ 11, 0x0c2d, 0, {0x90,0x7f,0xc9,0xe4,0xf0,0x75,0x31,0x00,0x02,0x09,0x2a} }, +{ 1, 0x0c38, 0, {0x22} }, +{ 7, 0x0c39, 0, {0x53,0x55,0x50,0x45,0x4e,0x44,0x00} }, +{ 7, 0x0c40, 0, {0x52,0x45,0x53,0x55,0x4d,0x45,0x00} }, +{ 6, 0x0c47, 0, {0x20,0x56,0x6f,0x6c,0x20,0x00} }, +{ 13, 0x0c4d, 0, {0x44,0x41,0x42,0x55,0x53,0x42,0x20,0x76,0x31,0x2e,0x30,0x30,0x00} }, +{ 14, 0x0c5a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, +{ 14, 0x0c68, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, +{ 13, 0x0c76, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, +{ 14, 0x0c83, 0, {0x7f,0xab,0x74,0x01,0xf0,0x90,0x7f,0xe8,0xe0,0xfa,0x90,0x7f,0xe9,0xe0} }, +{ 6, 0x0c91, 0, {0xfb,0xbb,0x00,0x02,0x80,0x03} }, +{ 3, 0x0c97, 0, {0x02,0x0d,0x38} }, +{ 3, 0x0c9a, 0, {0xba,0x80,0x14} }, +{ 14, 0x0c9d, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5} }, +{ 6, 0x0cab, 0, {0x74,0x02,0xf0,0x02,0x0e,0xcd} }, +{ 5, 0x0cb1, 0, {0xba,0x82,0x02,0x80,0x03} }, +{ 3, 0x0cb6, 0, {0x02,0x0d,0x1d} }, +{ 8, 0x0cb9, 0, {0x90,0x7f,0xec,0xe0,0xfc,0xbc,0x01,0x00} }, +{ 2, 0x0cc1, 0, {0x40,0x21} }, +{ 6, 0x0cc3, 0, {0xc3,0x74,0x07,0x9c,0x40,0x1b} }, +{ 14, 0x0cc9, 0, {0xec,0x24,0xff,0x25,0xe0,0xfd,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} }, +{ 13, 0x0cd7, 0, {0x83,0xe0,0xfd,0x53,0x05,0x01,0x90,0x7f,0x00,0xed,0xf0,0x80,0x2b} }, +{ 3, 0x0ce4, 0, {0xbc,0x81,0x00} }, +{ 2, 0x0ce7, 0, {0x40,0x21} }, +{ 6, 0x0ce9, 0, {0xc3,0x74,0x87,0x9c,0x40,0x1b} }, +{ 14, 0x0cef, 0, {0xec,0x24,0x7f,0x25,0xe0,0xfc,0x24,0xb6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} }, +{ 13, 0x0cfd, 0, {0x83,0xe0,0xfc,0x53,0x04,0x01,0x90,0x7f,0x00,0xec,0xf0,0x80,0x05} }, +{ 5, 0x0d0a, 0, {0x90,0x7f,0x00,0xe4,0xf0} }, +{ 14, 0x0d0f, 0, {0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74,0x02,0xf0,0x02,0x0e,0xcd} }, +{ 5, 0x0d1d, 0, {0xba,0x81,0x02,0x80,0x03} }, +{ 3, 0x0d22, 0, {0x02,0x0e,0xc5} }, +{ 14, 0x0d25, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74} }, +{ 5, 0x0d33, 0, {0x02,0xf0,0x02,0x0e,0xcd} }, +{ 3, 0x0d38, 0, {0xbb,0x01,0x2d} }, +{ 6, 0x0d3b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} }, +{ 3, 0x0d41, 0, {0xba,0x02,0x11} }, +{ 13, 0x0d44, 0, {0x75,0x59,0x00,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} }, +{ 4, 0x0d51, 0, {0x02,0x02,0x0e,0xcd} }, +{ 5, 0x0d55, 0, {0xba,0x21,0x02,0x80,0x03} }, +{ 3, 0x0d5a, 0, {0x02,0x0e,0xcd} }, +{ 11, 0x0d5d, 0, {0x75,0x37,0x01,0x90,0x7f,0xc5,0xe4,0xf0,0x02,0x0e,0xcd} }, +{ 3, 0x0d68, 0, {0xbb,0x03,0x1f} }, +{ 6, 0x0d6b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} }, +{ 5, 0x0d71, 0, {0xba,0x02,0x02,0x80,0x03} }, +{ 3, 0x0d76, 0, {0x02,0x0e,0xcd} }, +{ 13, 0x0d79, 0, {0x75,0x59,0x01,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} }, +{ 4, 0x0d86, 0, {0x02,0x02,0x0e,0xcd} }, +{ 3, 0x0d8a, 0, {0xbb,0x06,0x54} }, +{ 5, 0x0d8d, 0, {0xba,0x80,0x02,0x80,0x03} }, +{ 3, 0x0d92, 0, {0x02,0x0e,0xc5} }, +{ 8, 0x0d95, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x01,0x15} }, +{ 12, 0x0d9d, 0, {0x7c,0xfb,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} }, +{ 9, 0x0da9, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} }, +{ 10, 0x0db2, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x02,0x02,0x80,0x03} }, +{ 3, 0x0dbc, 0, {0x02,0x0e,0xc5} }, +{ 10, 0x0dbf, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x02,0x80,0x03} }, +{ 3, 0x0dc9, 0, {0x02,0x0e,0xc5} }, +{ 12, 0x0dcc, 0, {0x7c,0x3b,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} }, +{ 9, 0x0dd8, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} }, +{ 6, 0x0de1, 0, {0xbb,0x07,0x03,0x02,0x0e,0xc5} }, +{ 3, 0x0de7, 0, {0xbb,0x08,0x10} }, +{ 13, 0x0dea, 0, {0xac,0x48,0x90,0x7f,0x00,0xec,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} }, +{ 3, 0x0df7, 0, {0x02,0x0e,0xcd} }, +{ 3, 0x0dfa, 0, {0xbb,0x09,0x31} }, +{ 5, 0x0dfd, 0, {0xba,0x00,0x02,0x80,0x03} }, +{ 3, 0x0e02, 0, {0x02,0x0e,0xc5} }, +{ 14, 0x0e05, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xc3,0x74,0x01,0x9c,0x50,0x03,0x02,0x0e,0xc5} }, +{ 8, 0x0e13, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x0a} }, +{ 10, 0x0e1b, 0, {0x90,0x17,0x21,0xe4,0xf0,0x90,0x17,0x22,0xe4,0xf0} }, +{ 9, 0x0e25, 0, {0x90,0x7f,0xea,0xe0,0xf5,0x48,0x02,0x0e,0xcd} }, +{ 3, 0x0e2e, 0, {0xbb,0x0a,0x27} }, +{ 5, 0x0e31, 0, {0xba,0x81,0x02,0x80,0x03} }, +{ 3, 0x0e36, 0, {0x02,0x0e,0xc5} }, +{ 14, 0x0e39, 0, {0x90,0x7f,0xec,0xe0,0xfa,0x24,0x20,0xfa,0xe4,0x34,0x17,0xfc,0x8a,0x82} }, +{ 14, 0x0e47, 0, {0x8c,0x83,0xe0,0xfa,0x90,0x7f,0x00,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} }, +{ 3, 0x0e55, 0, {0x02,0x0e,0xcd} }, +{ 5, 0x0e58, 0, {0xbb,0x0b,0x02,0x80,0x03} }, +{ 3, 0x0e5d, 0, {0x02,0x0e,0xa9} }, +{ 13, 0x0e60, 0, {0x90,0x17,0x20,0xe4,0xf0,0x90,0x7f,0xec,0xe0,0xfa,0xba,0x01,0x1a} }, +{ 8, 0x0e6d, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x12} }, +{ 14, 0x0e75, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x90,0x17,0x21,0xf0,0xc0,0x03,0x12,0x04,0xe2} }, +{ 4, 0x0e83, 0, {0xd0,0x03,0x80,0x46} }, +{ 8, 0x0e87, 0, {0x90,0x7f,0xec,0xe0,0xfa,0xba,0x02,0x3e} }, +{ 8, 0x0e8f, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x36} }, +{ 13, 0x0e97, 0, {0xc0,0x03,0x12,0x04,0xef,0xd0,0x03,0x90,0x7f,0xea,0xe0,0xfa,0x90} }, +{ 5, 0x0ea4, 0, {0x17,0x22,0xf0,0x80,0x24} }, +{ 5, 0x0ea9, 0, {0xbb,0x12,0x02,0x80,0x17} }, +{ 5, 0x0eae, 0, {0xbb,0x81,0x02,0x80,0x0d} }, +{ 5, 0x0eb3, 0, {0xbb,0x83,0x02,0x80,0x08} }, +{ 5, 0x0eb8, 0, {0xbb,0x82,0x02,0x80,0x03} }, +{ 3, 0x0ebd, 0, {0xbb,0x84,0x05} }, +{ 5, 0x0ec0, 0, {0x12,0x06,0x4e,0x80,0x08} }, +{ 8, 0x0ec5, 0, {0x90,0x7f,0xb4,0x74,0x03,0xf0,0x80,0x06} }, +{ 6, 0x0ecd, 0, {0x90,0x7f,0xb4,0x74,0x02,0xf0} }, +{ 2, 0x0ed3, 0, {0xd0,0x86} }, +{ 14, 0x0ed5, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, +{ 13, 0x0ee3, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, +{ 11, 0x0ef0, 0, {0x90,0x7f,0xec,0xe0,0xf5,0x5a,0xc3,0x94,0x01,0x40,0x1d} }, +{ 7, 0x0efb, 0, {0xc3,0x74,0x07,0x95,0x5a,0x40,0x16} }, +{ 13, 0x0f02, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xc6,0xf5,0x82,0xe4,0x34} }, +{ 9, 0x0f0f, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0,0x80,0x22} }, +{ 7, 0x0f18, 0, {0xc3,0xe5,0x5a,0x94,0x81,0x40,0x1b} }, +{ 7, 0x0f1f, 0, {0xc3,0x74,0x87,0x95,0x5a,0x40,0x14} }, +{ 13, 0x0f26, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xb6,0xf5,0x82,0xe4,0x34} }, +{ 7, 0x0f33, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0} }, +{ 1, 0x0f3a, 0, {0x22} }, +{ 14, 0x0f3b, 0, {0x09,0x02,0xba,0x00,0x03,0x01,0x00,0x40,0x00,0x09,0x04,0x00,0x00,0x00} }, +{ 14, 0x0f49, 0, {0x01,0x01,0x00,0x00,0x09,0x24,0x01,0x00,0x01,0x3d,0x00,0x01,0x01,0x0c} }, +{ 14, 0x0f57, 0, {0x24,0x02,0x01,0x10,0x07,0x00,0x02,0x03,0x00,0x00,0x00,0x0d,0x24,0x06} }, +{ 14, 0x0f65, 0, {0x03,0x01,0x02,0x15,0x00,0x03,0x00,0x03,0x00,0x00,0x09,0x24,0x03,0x02} }, +{ 14, 0x0f73, 0, {0x01,0x01,0x00,0x01,0x00,0x09,0x24,0x03,0x04,0x02,0x03,0x00,0x03,0x00} }, +{ 14, 0x0f81, 0, {0x09,0x24,0x03,0x05,0x03,0x06,0x00,0x01,0x00,0x09,0x04,0x01,0x00,0x00} }, +{ 14, 0x0f8f, 0, {0x01,0x02,0x00,0x00,0x09,0x04,0x01,0x01,0x01,0x01,0x02,0x00,0x00,0x07} }, +{ 14, 0x0f9d, 0, {0x24,0x01,0x02,0x01,0x01,0x00,0x0b,0x24,0x02,0x01,0x02,0x02,0x10,0x01} }, +{ 14, 0x0fab, 0, {0x80,0xbb,0x00,0x09,0x05,0x88,0x05,0x00,0x01,0x01,0x00,0x00,0x07,0x25} }, +{ 14, 0x0fb9, 0, {0x01,0x00,0x00,0x00,0x00,0x09,0x04,0x02,0x00,0x02,0x00,0x00,0x00,0x00} }, +{ 14, 0x0fc7, 0, {0x07,0x05,0x82,0x02,0x40,0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00} }, +{ 14, 0x0fd5, 0, {0x09,0x04,0x02,0x01,0x03,0x00,0x00,0x00,0x00,0x07,0x05,0x82,0x02,0x40} }, +{ 14, 0x0fe3, 0, {0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00,0x09,0x05,0x89,0x05,0xa0} }, +{ 10, 0x0ff1, 0, {0x01,0x01,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0x00} }, +{ 14, 0x0ffb, 0, {0x12,0x01,0x00,0x01,0x00,0x00,0x00,0x40,0x47,0x05,0x99,0x99,0x00,0x01} }, +{ 14, 0x1009, 0, {0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x09,0x02,0xba} }, +{ 4, 0x1017, 0, {0x00,0x03,0x01,0x00} }, +{ 2, 0x101b, 0, {0x7a,0x00} }, +{ 3, 0x101d, 0, {0xba,0x05,0x00} }, +{ 2, 0x1020, 0, {0x50,0x17} }, +{ 8, 0x1022, 0, {0x90,0x7f,0xa5,0xe0,0xfb,0x30,0xe0,0x05} }, +{ 5, 0x102a, 0, {0x90,0x00,0x01,0x80,0x0d} }, +{ 10, 0x102f, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xe4} }, +{ 3, 0x1039, 0, {0x90,0x00,0x01} }, +{ 1, 0x103c, 0, {0x22} }, +{ 14, 0x103d, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0x00,0x7d} }, +{ 4, 0x104b, 0, {0x7e,0xeb,0x60,0x12} }, +{ 14, 0x104f, 0, {0x89,0x82,0x8a,0x83,0xe0,0xa3,0xa9,0x82,0xaa,0x83,0x8c,0x82,0x8d,0x83} }, +{ 4, 0x105d, 0, {0xf0,0x0c,0xdb,0xee} }, +{ 8, 0x1061, 0, {0x90,0x7d,0xc3,0xe0,0x90,0x7f,0xb9,0xf0} }, +{ 1, 0x1069, 0, {0x22} }, +{ 14, 0x106a, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0xc4,0x7d} }, +{ 4, 0x1078, 0, {0x7d,0xeb,0x60,0xe5} }, +{ 14, 0x107c, 0, {0x8c,0x82,0x8d,0x83,0xe0,0x0c,0x89,0x82,0x8a,0x83,0xf0,0xa3,0xa9,0x82} }, +{ 4, 0x108a, 0, {0xaa,0x83,0xdb,0xee} }, +{ 1, 0x108e, 0, {0x22} }, +{ 14, 0x108f, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x05,0x86,0x90,0x7d,0xc1,0xe0,0x05,0x86} }, +{ 14, 0x109d, 0, {0xa3,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0x05,0x86,0xa3,0xa3,0xe0,0xf9} }, +{ 5, 0x10ab, 0, {0x60,0x16,0xa3,0x05,0x86} }, +{ 13, 0x10b0, 0, {0x90,0x7f,0xa6,0x05,0x86,0xe0,0xa3,0x05,0x86,0xf0,0xc0,0x01,0x12} }, +{ 6, 0x10bd, 0, {0x10,0x1b,0xd0,0x01,0xd9,0xed} }, +{ 6, 0x10c3, 0, {0x90,0x7f,0xa5,0x74,0x40,0xf0} }, +{ 1, 0x10c9, 0, {0x22} }, +{ 8, 0x10ca, 0, {0x90,0x88,0x02,0x74,0x01,0xf0,0x7a,0x00} }, +{ 3, 0x10d2, 0, {0xba,0xff,0x00} }, +{ 2, 0x10d5, 0, {0x50,0x0a} }, +{ 10, 0x10d7, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} }, +{ 1, 0x10e1, 0, {0x22} }, +{ 5, 0x10e2, 0, {0xe5,0x6b,0xb4,0xc0,0x08} }, +{ 8, 0x10e7, 0, {0x90,0x88,0x03,0xe5,0x6c,0xf0,0x80,0x06} }, +{ 6, 0x10ef, 0, {0x90,0x88,0x02,0xe5,0x6c,0xf0} }, +{ 4, 0x10f5, 0, {0x7a,0x00,0x7b,0x00} }, +{ 11, 0x10f9, 0, {0xc3,0xea,0x94,0x32,0xeb,0x64,0x80,0x94,0x80,0x50,0x07} }, +{ 5, 0x1104, 0, {0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x1109, 0, {0x80,0xee} }, +{ 1, 0x110b, 0, {0x22} }, +{ 10, 0x110c, 0, {0x90,0x88,0x03,0xe5,0x6d,0xf0,0x05,0x39,0x7a,0x00} }, +{ 3, 0x1116, 0, {0xba,0x28,0x00} }, +{ 2, 0x1119, 0, {0x50,0x03} }, +{ 3, 0x111b, 0, {0x0a,0x80,0xf8} }, +{ 5, 0x111e, 0, {0xe5,0x39,0xb4,0x10,0x08} }, +{ 8, 0x1123, 0, {0x90,0x88,0x02,0x74,0xc0,0xf0,0x80,0x0e} }, +{ 5, 0x112b, 0, {0xe5,0x39,0xb4,0x20,0x09} }, +{ 9, 0x1130, 0, {0x90,0x88,0x02,0x74,0x80,0xf0,0x75,0x39,0x00} }, +{ 2, 0x1139, 0, {0x7a,0x00} }, +{ 3, 0x113b, 0, {0xba,0x28,0x00} }, +{ 2, 0x113e, 0, {0x50,0x03} }, +{ 3, 0x1140, 0, {0x0a,0x80,0xf8} }, +{ 1, 0x1143, 0, {0x22} }, +{ 4, 0x1144, 0, {0xe5,0x6f,0x60,0x02} }, +{ 2, 0x1148, 0, {0x80,0x07} }, +{ 7, 0x114a, 0, {0x7a,0x00,0x75,0x39,0x00,0x80,0x05} }, +{ 5, 0x1151, 0, {0x7a,0x40,0x75,0x39,0x10} }, +{ 9, 0x1156, 0, {0xe5,0x6e,0x2a,0xfa,0xe5,0x6e,0x25,0x39,0xf5} }, +{ 10, 0x115f, 0, {0x39,0x90,0x88,0x02,0x74,0x80,0x2a,0xf0,0x7a,0x00} }, +{ 8, 0x1169, 0, {0xc3,0xea,0x64,0x80,0x94,0xa8,0x50,0x03} }, +{ 3, 0x1171, 0, {0x0a,0x80,0xf5} }, +{ 1, 0x1174, 0, {0x22} }, +{ 6, 0x1175, 0, {0xaa,0x70,0xab,0x71,0xac,0x72} }, +{ 12, 0x117b, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x12,0x14,0xee,0xfd,0x60,0x18} }, +{ 13, 0x1187, 0, {0x8d,0x6d,0xc0,0x02,0xc0,0x03,0xc0,0x04,0x12,0x11,0x0c,0xd0,0x04} }, +{ 9, 0x1194, 0, {0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} }, +{ 2, 0x119d, 0, {0x80,0xdc} }, +{ 1, 0x119f, 0, {0x22} }, +{ 13, 0x11a0, 0, {0xe5,0x73,0xc4,0x54,0x0f,0xfa,0x53,0x02,0x0f,0xc3,0x74,0x09,0x9a} }, +{ 2, 0x11ad, 0, {0x50,0x06} }, +{ 6, 0x11af, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} }, +{ 4, 0x11b5, 0, {0x74,0x30,0x2a,0xfb} }, +{ 12, 0x11b9, 0, {0x8b,0x6d,0xc0,0x03,0x12,0x11,0x0c,0xd0,0x03,0xaa,0x73,0x53} }, +{ 8, 0x11c5, 0, {0x02,0x0f,0xc3,0x74,0x09,0x9a,0x50,0x06} }, +{ 6, 0x11cd, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} }, +{ 4, 0x11d3, 0, {0x74,0x30,0x2a,0xfb} }, +{ 5, 0x11d7, 0, {0x8b,0x6d,0x12,0x11,0x0c} }, +{ 1, 0x11dc, 0, {0x22} }, +{ 7, 0x11dd, 0, {0x90,0x7d,0xc3,0xe0,0xfa,0x60,0x0f} }, +{ 12, 0x11e4, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x6e,0x90,0x7d,0xc2,0xe0,0xf5,0x6f} }, +{ 3, 0x11f0, 0, {0x12,0x11,0x44} }, +{ 12, 0x11f3, 0, {0x90,0x7d,0xff,0xe4,0xf0,0x75,0x70,0xc4,0x75,0x71,0x7d,0x75} }, +{ 5, 0x11ff, 0, {0x72,0x01,0x12,0x11,0x75} }, +{ 1, 0x1204, 0, {0x22} }, +{ 2, 0x1205, 0, {0x7a,0x04} }, +{ 3, 0x1207, 0, {0xba,0x40,0x00} }, +{ 2, 0x120a, 0, {0x50,0x36} }, +{ 14, 0x120c, 0, {0xea,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfb,0x7c,0x00} }, +{ 3, 0x121a, 0, {0xbc,0x08,0x00} }, +{ 2, 0x121d, 0, {0x50,0x20} }, +{ 6, 0x121f, 0, {0x8b,0x05,0xed,0x30,0xe7,0x0b} }, +{ 11, 0x1225, 0, {0x90,0x7f,0x96,0x74,0x42,0xf0,0x74,0xc3,0xf0,0x80,0x08} }, +{ 8, 0x1230, 0, {0x90,0x7f,0x96,0xe4,0xf0,0x74,0x81,0xf0} }, +{ 7, 0x1238, 0, {0xeb,0x25,0xe0,0xfb,0x0c,0x80,0xdb} }, +{ 3, 0x123f, 0, {0x0a,0x80,0xc5} }, +{ 1, 0x1242, 0, {0x22} }, +{ 4, 0x1243, 0, {0x7a,0x00,0x7b,0xef} }, +{ 3, 0x1247, 0, {0xba,0x10,0x00} }, +{ 2, 0x124a, 0, {0x50,0x20} }, +{ 14, 0x124c, 0, {0x74,0x11,0x2b,0xfb,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0x8c,0x82,0x8d} }, +{ 14, 0x125a, 0, {0x83,0xe4,0xf0,0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe4} }, +{ 4, 0x1268, 0, {0xf0,0x0a,0x80,0xdb} }, +{ 1, 0x126c, 0, {0x22} }, +{ 14, 0x126d, 0, {0x74,0xf8,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x127b, 0, {0x74,0xf9,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x1289, 0, {0x74,0xfa,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x1297, 0, {0x74,0xfb,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 14, 0x12a5, 0, {0x74,0xff,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, +{ 1, 0x12b3, 0, {0x22} }, +{ 14, 0x12b4, 0, {0x12,0x03,0xcb,0x12,0x12,0x6d,0x7a,0xc0,0x7b,0x87,0x7c,0x01,0x74,0x01} }, +{ 14, 0x12c2, 0, {0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74} }, +{ 14, 0x12d0, 0, {0x01,0x12,0x14,0xbf,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e} }, +{ 14, 0x12de, 0, {0x83,0x8f,0xf0,0x74,0x06,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b} }, +{ 14, 0x12ec, 0, {0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74} }, +{ 14, 0x12fa, 0, {0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0} }, +{ 14, 0x1308, 0, {0x74,0x0b,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07} }, +{ 14, 0x1316, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74,0x08,0x12,0x14,0xbf,0x74,0x01,0x2d} }, +{ 14, 0x1324, 0, {0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x01} }, +{ 14, 0x1332, 0, {0x12,0x14,0xbf,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83} }, +{ 14, 0x1340, 0, {0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74,0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f} }, +{ 14, 0x134e, 0, {0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x03,0x12,0x14,0xbf,0x7d,0x00} }, +{ 3, 0x135c, 0, {0xbd,0x06,0x00} }, +{ 2, 0x135f, 0, {0x50,0x12} }, +{ 11, 0x1361, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x0a,0xba,0x00,0x01,0x0b} }, +{ 7, 0x136c, 0, {0xe4,0x12,0x14,0xbf,0x0d,0x80,0xe9} }, +{ 13, 0x1373, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe5,0x74,0x12,0x14,0xbf,0x74,0xf9} }, +{ 14, 0x1380, 0, {0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x0f,0xf0,0x74} }, +{ 14, 0x138e, 0, {0xfe,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x01,0xf0} }, +{ 6, 0x139c, 0, {0x12,0x03,0xe1,0x12,0x04,0xf7} }, +{ 1, 0x13a2, 0, {0x22} }, +{ 13, 0x13a3, 0, {0x90,0x7d,0xc1,0xe0,0xfa,0x24,0x00,0xfb,0xe4,0x34,0x19,0xfc,0x90} }, +{ 14, 0x13b0, 0, {0x7d,0xc2,0xe0,0xfd,0x8b,0x82,0x8c,0x83,0xf0,0x75,0xf0,0x11,0xea,0xa4} }, +{ 3, 0x13be, 0, {0xfa,0x7b,0x00} }, +{ 3, 0x13c1, 0, {0xbb,0x10,0x00} }, +{ 2, 0x13c4, 0, {0x50,0x24} }, +{ 14, 0x13c6, 0, {0xea,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0xeb,0x2c,0xfc,0xe4,0x3d,0xfd} }, +{ 14, 0x13d4, 0, {0x74,0x04,0x2b,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfe} }, +{ 8, 0x13e2, 0, {0x8c,0x82,0x8d,0x83,0xf0,0x0b,0x80,0xd7} }, +{ 14, 0x13ea, 0, {0xea,0x24,0x00,0xfa,0xe4,0x34,0x18,0xfb,0x74,0x10,0x2a,0xf5,0x82,0xe4} }, +{ 5, 0x13f8, 0, {0x3b,0xf5,0x83,0xe4,0xf0} }, +{ 1, 0x13fd, 0, {0x22} }, +{ 4, 0x13fe, 0, {0xe5,0x76,0x60,0x02} }, +{ 2, 0x1402, 0, {0x80,0x16} }, +{ 12, 0x1404, 0, {0x74,0x0f,0x55,0x75,0xfa,0x8a,0x75,0x24,0x00,0xf5,0x82,0xe4} }, +{ 10, 0x1410, 0, {0x34,0x19,0xf5,0x83,0xe0,0xf5,0x74,0x12,0x12,0xb4} }, +{ 10, 0x141a, 0, {0x12,0x10,0xca,0x75,0x6e,0x00,0x75,0x6f,0x00,0x12} }, +{ 6, 0x1424, 0, {0x11,0x44,0x75,0x70,0xb9,0x75} }, +{ 6, 0x142a, 0, {0x71,0x14,0x75,0x72,0x02,0x12} }, +{ 11, 0x1430, 0, {0x11,0x75,0xe5,0x76,0xb4,0x02,0x04,0x74,0x01,0x80,0x01} }, +{ 1, 0x143b, 0, {0xe4} }, +{ 3, 0x143c, 0, {0xfa,0x70,0x0f} }, +{ 12, 0x143f, 0, {0x74,0x01,0x25,0x75,0xf5,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0} }, +{ 3, 0x144b, 0, {0x02,0x80,0x0a} }, +{ 10, 0x144e, 0, {0x85,0x75,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0,0x02} }, +{ 12, 0x1458, 0, {0x75,0x6e,0x00,0x75,0x6f,0x01,0xc0,0x02,0x12,0x11,0x44,0xd0} }, +{ 4, 0x1464, 0, {0x02,0xea,0x70,0x1a} }, +{ 13, 0x1468, 0, {0x75,0xf0,0x11,0xe5,0x75,0xa4,0xfa,0x24,0x00,0xfa,0xe4,0x34,0x18} }, +{ 9, 0x1475, 0, {0xfb,0x8a,0x70,0x8b,0x71,0x75,0x72,0x01,0x12} }, +{ 4, 0x147e, 0, {0x11,0x75,0x80,0x36} }, +{ 2, 0x1482, 0, {0x7a,0x00} }, +{ 3, 0x1484, 0, {0xba,0x10,0x00} }, +{ 2, 0x1487, 0, {0x50,0x2f} }, +{ 13, 0x1489, 0, {0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe0,0xfb,0xe5} }, +{ 4, 0x1496, 0, {0x75,0xb5,0x03,0x1b} }, +{ 14, 0x149a, 0, {0x75,0xf0,0x11,0xea,0xa4,0xfb,0x24,0x00,0xfb,0xe4,0x34,0x18,0xfc,0x8b} }, +{ 9, 0x14a8, 0, {0x70,0x8c,0x71,0x75,0x72,0x01,0xc0,0x02,0x12} }, +{ 4, 0x14b1, 0, {0x11,0x75,0xd0,0x02} }, +{ 3, 0x14b5, 0, {0x0a,0x80,0xcc} }, +{ 1, 0x14b8, 0, {0x22} }, +{ 6, 0x14b9, 0, {0x50,0x72,0x6f,0x67,0x20,0x00} }, +{ 14, 0x14bf, 0, {0xc8,0xc0,0xe0,0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0b,0x14,0x60,0x0f,0x14} }, +{ 7, 0x14cd, 0, {0x60,0x11,0x14,0x60,0x12,0x80,0x15} }, +{ 7, 0x14d4, 0, {0xd0,0xe0,0xa8,0x82,0xf6,0x80,0x0e} }, +{ 5, 0x14db, 0, {0xd0,0xe0,0xf0,0x80,0x09} }, +{ 4, 0x14e0, 0, {0xd0,0xe0,0x80,0x05} }, +{ 5, 0x14e4, 0, {0xd0,0xe0,0xa8,0x82,0xf2} }, +{ 4, 0x14e9, 0, {0xc8,0xd0,0xe0,0xc8} }, +{ 1, 0x14ed, 0, {0x22} }, +{ 14, 0x14ee, 0, {0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0d,0x14,0x60,0x0f,0x14,0x60,0x0f,0x14} }, +{ 6, 0x14fc, 0, {0x60,0x10,0x74,0xff,0x80,0x0f} }, +{ 5, 0x1502, 0, {0xa8,0x82,0xe6,0x80,0x0a} }, +{ 3, 0x1507, 0, {0xe0,0x80,0x07} }, +{ 4, 0x150a, 0, {0xe4,0x93,0x80,0x03} }, +{ 3, 0x150e, 0, {0xa8,0x82,0xe2} }, +{ 4, 0x1511, 0, {0xf8,0xd0,0xe0,0xc8} }, +{ 1, 0x1515, 0, {0x22} }, +{ 0, 0x0000, 1, {0} } + +}; + +static unsigned char bitstream[] = { + +0x00,0x09,0x0F,0xF0,0x0F,0xF0,0x0F,0xF0, 0x0F,0xF0,0x00,0x00,0x01,0x61,0x00,0x0D, +0x64,0x61,0x62,0x75,0x73,0x62,0x74,0x72, 0x2E,0x6E,0x63,0x64,0x00,0x62,0x00,0x0B, +0x73,0x31,0x30,0x78,0x6C,0x76,0x71,0x31, 0x30,0x30,0x00,0x63,0x00,0x0B,0x31,0x39, +0x39,0x39,0x2F,0x30,0x39,0x2F,0x32,0x34, 0x00,0x64,0x00,0x09,0x31,0x30,0x3A,0x34, +0x32,0x3A,0x34,0x36,0x00,0x65,0x00,0x00, 0x2E,0xC0,0xFF,0x20,0x17,0x5F,0x9F,0x5B, +0xFE,0xFB,0xBB,0xB7,0xBB,0xBB,0xFB,0xBF, 0xAF,0xEF,0xFB,0xDF,0xB7,0xFB,0xFB,0x7F, +0xBF,0xB7,0xEF,0xF2,0xFF,0xFB,0xFE,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xBF,0xFF,0xFF, +0xFF,0xFF,0xAF,0xFF,0xFA,0xFF,0xFF,0xFF, 0xC9,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xA3,0xFF,0xFB, +0xFE,0xFF,0xBF,0xEF,0xE3,0xFE,0xFF,0xBF, 0xE3,0xFE,0xFF,0xBF,0x6F,0xFB,0xF6,0xFF, +0xBF,0xFF,0x47,0xFF,0xFF,0x9F,0xEE,0xF9, 0xFE,0xCF,0x9F,0xEF,0xFB,0xCF,0x9B,0xEE, +0xF8,0xFE,0xEF,0x8F,0xEE,0xFB,0xFE,0x0B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xBF,0xFF,0xFF,0xFB,0xFF,0xFF, 0xBF,0xFF,0xFF,0xFC,0x17,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFB,0xFF,0xFF,0x7F,0xFF,0xFF, +0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x5F,0xFF, 0xFF,0xFD,0xFF,0xFF,0xDB,0xFF,0xFD,0xFF, +0x77,0xFF,0xFD,0xFF,0xFF,0xDF,0xFE,0xFD, 0xFF,0xFF,0xF2,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1, +0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xE3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF, +0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x67,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0x7F,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xDF,0xFF,0xFF,0xFF,0x2F,0xFF, +0xF3,0xFD,0xFF,0x7F,0xDE,0xF7,0xFD,0xFF, 0x7F,0xF7,0x7D,0xFF,0x7F,0xDF,0xF7,0xBD, +0xFF,0x7F,0xFF,0x1F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xEF,0xFB, +0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF, 0x3F,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F, +0x9F,0xE7,0xFA,0x7F,0x9F,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xFF,0xFC,0x7F,0xBF,0xBF, +0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xB7, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, +0xFF,0xE0,0xFD,0xF9,0xFE,0x7F,0x9F,0xE7, 0xF9,0xFE,0x7F,0x9D,0xF9,0xFE,0x7D,0x9D, +0xE7,0xF9,0xFE,0x7F,0x9F,0xED,0xED,0xFF, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, +0xDF,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF, 0x7F,0xDF,0xFF,0x9B,0xFF,0xEF,0xFB,0xFE, +0xFB,0xBF,0xEF,0xBB,0xFE,0xFF,0xAF,0xBB, 0xBE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF, +0xB7,0xBF,0xDB,0xF6,0xBD,0xBF,0x6B,0xDB, 0xF6,0xF9,0xBF,0x5B,0xD6,0xF9,0xBF,0x6F, +0xDB,0xF6,0xFD,0xBF,0xFF,0x0E,0xFF,0xFF, 0xFF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0x7F, +0xF7,0xBD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xDF,0x9F,0xFF,0xFF,0xFF,0xFE,0xFF, +0xFF,0xEF,0xFE,0xFE,0xFF,0xFF,0x77,0xFF, 0xFB,0xFB,0xFF,0xFF,0xFF,0xFF,0xF8,0x3F, +0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xF4,0x7F,0xFF,0xFE,0xFD, 0xBE,0xFF,0xDF,0xFE,0xFF,0xFF,0xEF,0x7F, +0xFF,0xCF,0xFF,0xCF,0xFF,0xFF,0xFF,0xDF, 0xE6,0xFF,0xFF,0x7F,0xDF,0xF7,0xDD,0x7F, +0x7F,0xDF,0xF7,0xFF,0x7F,0xDF,0xD7,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFF,0xCD,0xFF,0xF2, +0xFF,0xFF,0x4F,0x7F,0xF4,0xFF,0xFF,0xFF, 0xE7,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xBB,0xFF,0xEF,0xFF,0xFE,0xFF, 0xFF,0xFF,0xEF,0xFF,0xFF,0xEF,0xFF,0xFB, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x65, 0xEF,0xFF,0xFF,0x7F,0xFF,0xFD,0xEF,0xFF, +0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xCF,0xDF,0xFE,0xFF, +0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xF3,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFE,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xEF,0xEB,0xFF,0xFE,0xBF,0xFF, 0xEB,0xFF,0xFC,0x7F,0xFF,0xFF,0xFF,0xEE, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xD6,0xFF,0xFD,0xBF,0xFF,0xFB,0xFF,0xFE, +0xFD,0xFF,0xFF,0xFD,0xEF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xDE,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0x7F,0xBF, 0xFF,0x5F,0xDF,0xFF,0xFF,0xBF,0x77,0xFF, +0xFF,0xFF,0x7F,0xD7,0xFF,0xFF,0xFF,0xFF, 0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xDF,0xEF, +0xFF,0xFF,0xFE,0xFB,0xFF,0xFF,0xDF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xB7,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xAF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xBF,0xDF,0xF3,0xFD,0xFB,0xFF,0x5B, +0xFD,0xFF,0xBF,0xEF,0xF7,0xFF,0xFF,0x7D, 0xFF,0xFF,0xFF,0xFF,0xF8,0x3B,0xFF,0xBF, +0x6F,0xFF,0xFE,0xFF,0xBF,0xFF,0xEB,0x7D, 0xFF,0xEF,0xFB,0xFE,0xFF,0xFF,0xFF,0xFF, +0xFF,0xF2,0x7F,0xFC,0xFF,0x3F,0xDF,0xED, 0xFE,0xFF,0xFF,0xFF,0xFF,0xEF,0x5F,0xF7, +0xB5,0xFF,0xEF,0xFF,0xFF,0xFF,0xE0,0x3F, 0x9F,0x9E,0xFF,0xFF,0xEF,0xFF,0xDF,0xFF, +0xBF,0x5F,0xBF,0xCF,0xF3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x69,0xAF,0x33,0xFD,0xFF, +0xFB,0xFF,0xFF,0xFF,0xFF,0xFC,0xFF,0x7F, 0xD9,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xF5, +0xA3,0xDF,0x6E,0xDE,0xFF,0xFF,0xBD,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFE,0xE7,0xFD, +0xFF,0xFF,0xFF,0xF9,0xEF,0xC6,0xFE,0xB7, 0xAD,0xE5,0xF9,0xFF,0xFF,0xFF,0xCF,0xFF, +0xFF,0xFF,0xCD,0xFB,0x7F,0xFF,0xFF,0xFF, 0xF9,0xF6,0x0F,0xDF,0xEC,0xCF,0x7F,0xFF, +0xFB,0x7F,0xFF,0xFF,0xFF,0xFD,0xFF,0xFE, 0xF9,0xFD,0x7F,0xFF,0x7F,0xFF,0xF9,0x5B, +0xFF,0x73,0xDC,0xFD,0x7B,0xDF,0xFF,0xFF, 0xFF,0x7B,0xFF,0xFF,0xF7,0x53,0xD6,0xFF, +0xFF,0xFF,0xFF,0xD8,0x9F,0xFE,0xFF,0xEF, 0x7F,0xEE,0xFF,0xFF,0xFF,0xFB,0xED,0xED, +0xFD,0xFF,0xFE,0xFF,0xFF,0xFB,0x7F,0xFF, 0xE2,0x7F,0xFF,0x6F,0xD8,0x57,0xF7,0xFF, +0xFF,0xFF,0xDF,0xFF,0xE8,0xFF,0xFF,0xFD, 0xFF,0xFF,0xFC,0x7F,0xFF,0xE4,0xFF,0xFB, +0xEF,0xFB,0xFE,0xDF,0xB7,0xED,0xFF,0xFE, 0xDF,0x7F,0xFF,0xFE,0x7F,0xB7,0xFF,0xFF, +0xFF,0xFF,0x89,0xFF,0xFF,0xCF,0xF3,0xFE, 0x7F,0xFF,0xEF,0xFF,0xFE,0x7E,0x7F,0xFB, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF1, 0xFF,0xEB,0x7A,0xD5,0xBF,0x6F,0xDB,0xBE, +0xFD,0xB7,0xD8,0xF6,0xE5,0xBF,0x6F,0xFB, 0xFE,0xF5,0xBD,0x7E,0x06,0xFF,0xDF,0xF7, +0xFB,0xF6,0xFF,0x3F,0xFF,0xDB,0xFF,0xFF, 0x6F,0xFB,0xF7,0xFF,0xFF,0xFF,0xFB,0xFE, +0xF7,0xAF,0xFF,0xB7,0xED,0xEF,0xF7,0xFE, 0xFF,0xFF,0xDF,0xFF,0xFE,0xFF,0xEF,0xFF, +0xFF,0xFF,0xFF,0xBF,0xF7,0xFC,0x1F,0xEE, 0xFB,0xFE,0xBD,0xFF,0x7F,0x5F,0xD7,0xFD, +0xFB,0x43,0xFF,0xFF,0xFD,0xFF,0x5F,0xFF, 0xF7,0xFF,0xF9,0x3F,0xFF,0xCF,0xF3,0xFD, +0xF7,0x7E,0xEF,0xA7,0xF9,0xFE,0x8F,0xA7, 0xE9,0xF3,0x7E,0x9F,0xFB,0xF8,0xFF,0xFF, +0x3F,0xFD,0x7F,0x5F,0xDF,0xFD,0xFF,0xFF, 0x5F,0xFF,0xFD,0x5F,0xFF,0xFF,0x7F,0xFD, +0x7F,0xFD,0x9F,0xFF,0xE0,0xFF,0xFA,0xF8, 0xBE,0x6F,0x9F,0xE6,0xF8,0xBE,0x3F,0x9A, +0xF9,0xBE,0x6F,0x9F,0xE2,0xF9,0xFE,0x6F, 0x9F,0xF9,0xFF,0xF5,0xFD,0x7F,0xCF,0xDF, +0xFD,0xFD,0x7F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xF7,0xF5,0xFD,0x0F,0xDB,0xFF,0xD3,0xFF, +0xEB,0xFA,0xFF,0xFF,0xBF,0xFF,0xFA,0xFF, 0xFF,0xCB,0xFB,0xFE,0xFF,0xFF,0xEB,0xFA, +0xFE,0xFF,0xFF,0xB7,0xFF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xDF,0xF5,0xFF,0xFF,0xD7,0xFF, +0xFF,0xFF,0xDF,0xD7,0xF5,0xFF,0x7F,0xFE, 0x4F,0xFF,0xFD,0xFF,0x7F,0x7F,0xFF,0xAD, +0xEB,0xFB,0xFF,0xAD,0xFF,0xFF,0xFF,0xFF, 0xAF,0xEB,0xFB,0xFF,0xFC,0x0D,0xFF,0xFF, +0xDF,0xD2,0xFD,0xFF,0xFF,0xFD,0xF6,0xFF, 0xFF,0x7F,0xFF,0xFF,0x1F,0xFF,0xFF,0xFF, +0xFF,0xFB,0x3F,0x7D,0xEB,0x32,0xFE,0xBF, 0x2F,0xEB,0xFA,0xAE,0xBD,0xE0,0xFA,0x7E, +0xBF,0xAD,0xEB,0xFA,0xFE,0xBF,0xF5,0x7F, 0xFF,0xDE,0xFE,0xE3,0xFB,0xFF,0xFF,0xFF, +0xDF,0xEF,0x4F,0xDF,0xFF,0x7F,0xDF,0xFF, 0xF7,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xEF, +0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xDF, 0xED,0xFB,0xDF,0xFF,0xBF,0xFF,0xFF,0xFF, +0x81,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFF,0xFE,0xDD,0xFE,0xEF,0xFD,0xFF, +0xFF,0xFB,0xFE,0xF7,0xFF,0x93,0xFD,0xFB, 0x7E,0xFF,0xFE,0x87,0xE9,0xFF,0x7F,0xB3, +0x9F,0xFE,0xFE,0xFF,0xAF,0xFD,0xFE,0x7E, 0x3F,0xFE,0x67,0xFF,0xFF,0xF7,0xFF,0xFF, +0xFC,0xF7,0xDF,0xFD,0xFF,0x7F,0xFF,0xFF, 0x7F,0x6D,0xFF,0xFF,0xFE,0xFF,0xFF,0x2F, +0xFF,0xBF,0xFF,0xFF,0xEE,0xFF,0xBE,0xFF, 0xFF,0xFE,0xFF,0xEF,0xFF,0xFF,0xFE,0xFF, +0xEF,0xFF,0xFF,0xFA,0x5F,0xFF,0xFF,0xFB, 0xFF,0xFF,0xEF,0xFF,0xFB,0xFE,0xFD,0xFF, +0xFE,0xFF,0xFB,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFE,0xBF,0xDF,0xFF,0xFB,0xFF,0xFF,0xF7, +0xFC,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF2,0x7F,0xFF, +0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xF3,0xFF,0xFF,0xFF,0xEF,0xFB,0xFF,0xFF, +0xFF,0xDF,0xE2,0xFF,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xE7,0xFF,0xFD, +0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xED, 0xEF,0xFD,0xFF,0xFF,0xDF,0xD7,0xF5,0xFD, +0x7F,0x5D,0xFD,0xFF,0x7F,0xDF,0x97,0xF4, 0xFD,0x7B,0x5F,0xFF,0xC9,0xFF,0xFB,0xFE, +0xFF,0xBF,0xFF,0x5F,0xFF,0xFF,0xF7,0xFF, 0xEF,0xFD,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xF7,0xFF,0xD7,0xFD,0x7D,0x7F,0xFF, 0xFF,0xFF,0xFF,0xEF,0xDF,0xF7,0xFD,0xFF, +0xBB,0xFF,0xFF,0x7F,0xFF,0xFE,0xE3,0xFF, 0xF9,0xFE,0x7F,0xBF,0xEF,0xFB,0xFE,0xFF, +0xBF,0xF9,0xFE,0xFF,0x9F,0xEF,0xF9,0xFE, 0xFF,0xBF,0xF3,0xDA,0xFF,0x37,0xCD,0xF3, +0x7C,0xDF,0x37,0xCD,0xF3,0x7F,0x37,0xCD, 0xF3,0x7C,0xDF,0x37,0xCC,0xF3,0x7F,0x5A, +0xBD,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFD, 0xBF,0x6F,0xDE,0xFD,0xBF,0x6F,0xDB,0xF6, +0xFD,0xBF,0x6F,0xFE,0xF1,0x6F,0xEB,0x7A, 0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7,0xAF, +0x7A,0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7, 0xFF,0x7E,0xFF,0xFE,0xCD,0xB3,0x6C,0xDB, +0x36,0xCD,0xB3,0x6C,0xDE,0xCD,0xB3,0x6C, 0xDB,0x36,0xCD,0xB3,0x6C,0xDF,0xC9,0xBF, +0xF7,0xBD,0xEF,0x7A,0x9E,0xA7,0xA9,0xEA, 0x7A,0xB7,0xBD,0xEA,0x7B,0xDE,0xA7,0xBD, +0xCA,0x72,0x8D,0x91,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xF7,0xEF,0xFB, +0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFE, 0x87,0xFF,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6, +0xFD,0xBF,0x6F,0xF6,0xFD,0xBF,0x6F,0xDB, 0xF6,0xFD,0xBF,0x6F,0xFE,0x4F,0xFF,0xBF, +0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB,0xEF, 0xBE,0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB, +0xEF,0xFC,0x5F,0xFF,0xFF,0xFF,0x3F,0xCF, 0xF3,0xFC,0xFF,0x3F,0xCF,0xFC,0xFF,0x3F, +0xCF,0xF3,0xFC,0xFF,0x3F,0xCF,0xFD,0x9F, 0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF, +0xEB,0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFF,0xE1,0x6F,0xFD,0xFF,0x7F, +0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFD,0xFF, 0x7F,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF, +0x7A,0xBF,0xFB,0xFE,0xDF,0xB7,0xED,0xFB, 0x7E,0xDF,0xB7,0xFB,0x7E,0xDF,0xB7,0xED, +0xFB,0x7E,0xDF,0xB7,0xFF,0xC9,0xFF,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, +0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEE, 0xFB,0xFE,0xBB,0xFF,0xFE,0xFF,0xBF,0xEF, +0xFB,0xFE,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0x3F,0xCF,0xFF,0xE7, +0xFE,0xFF,0xF5,0xFD,0x77,0x5D,0xD7,0x35, 0xDD,0x77,0xD7,0xF5,0xCD,0x7B,0x5D,0xD7, +0xF5,0xDD,0x77,0xFE,0x27,0xFF,0xFF,0x8B, 0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9,0xAF, +0x8B,0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9, 0xFE,0x1F,0xFF,0x5F,0xD7,0xF5,0xFD,0x7F, +0x5F,0xD7,0xF5,0xFF,0x5F,0xD7,0xF5,0xFD, 0x7F,0x5F,0xD7,0xF5,0xFF,0xFA,0x3F,0xFE, +0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xEB, 0xEC,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF, +0xEB,0xFF,0xFE,0x7F,0xFD,0x7F,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE6, 0xFF,0xFA,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF, +0xF7,0xFC,0xFF,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFD,0xFF,0xF5,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0x02,0xFF,0xFE,0xBF,0xAB,0xEB,0xFA, 0xBE,0xBF,0x23,0xEB,0xDE,0x1F,0xAF,0xEA, +0xFA,0xFE,0xAF,0xAF,0xEB,0xFD,0x97,0xFF, 0xF3,0xFC,0x7B,0x1F,0xCF,0xF1,0xFC,0x7F, +0x1F,0xF1,0xFC,0x77,0x1F,0xCD,0xF1,0xFC, 0xFF,0x1F,0xFE,0x87,0xFF,0xAF,0xEF,0xFA, +0xFE,0xFF,0xAF,0xEF,0xFA,0xFD,0xBF,0x2B, 0xFB,0x7E,0xBF,0xBF,0xEB,0xFB,0xFB,0xFB, +0xDF,0xFF,0xFB,0xF7,0xFF,0xFF,0x7F,0xF7, 0xF7,0xFF,0xFD,0xDF,0xFE,0xFC,0xDF,0xFF, +0xDF,0xFF,0xFD,0xFF,0xDA,0xBF,0xFF,0xBB, 0xEF,0xFB,0xF9,0xFF,0xBE,0xEF,0xFB,0xFB, +0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xF7,0x7F,0xFD,0xD7,0xFF,0xFF,0x7F, +0xFF,0xFF,0xFF,0xFE,0xF7,0xFF,0xFE,0xFF, 0xF7,0xFF,0xFF,0x7F,0xFF,0xFF,0xEC,0xFF, +0xFF,0xFE,0xDF,0xBF,0xFF,0xFB,0xFE,0xFF, 0xBB,0x68,0xAE,0x1F,0xAE,0xFB,0xFB,0xFF, +0xFF,0xBF,0xFF,0xD5,0xFF,0x7F,0xFF,0xFF, 0xF7,0xFE,0xFE,0xFF,0xBF,0xEF,0x9F,0xFD, +0x7F,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF,0xFF, 0xBB,0xF7,0xBF,0xFF,0xFF,0xFF,0xFF,0xDF, +0xFF,0xBF,0xFB,0xFF,0xFF,0xFF,0xDE,0x3F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xA7,0xFF,0xFF, +0xFF,0xFF,0xEF,0xFF,0x7F,0xFB,0xFD,0xFB, 0x7F,0xFF,0xFF,0xFF,0xFF,0xCF,0xF3,0x7C, +0xFF,0x7F,0x8D,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFB,0xFF,0xF7,0xFB,0xFE,0xFD,0xFF,0xFF, +0xFF,0xFF,0xF7,0xFD,0xFF,0x7F,0xFD,0x1F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xBF,0xDF,0xFF, +0xFF,0xFE,0x5C,0xFF,0x6D,0xFF,0x7F,0xAB, 0xE7,0xF1,0xFF,0xFD,0x9F,0xFF,0xFF,0xAD, +0xEB,0x7A,0x3F,0x1F,0xFF,0xFF,0xFE,0xBF, 0xAF,0xF3,0xDE,0xF5,0xFF,0x8F,0xFB,0xDF, +0xE6,0x7F,0xFF,0xDF,0xF3,0xFD,0xFF,0x7E, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xF7,0xF3, +0x7F,0xDF,0xF7,0xEF,0xFF,0xF6,0x3F,0x9F, 0xDF,0xFF,0xFF,0xEE,0xFF,0xFF,0xEF,0xFB, +0xFF,0xFF,0xF9,0xFB,0xFE,0x4F,0xBF,0xEF, 0xBB,0xFF,0x69,0xAF,0xAF,0xFC,0xFF,0x3F, +0xDD,0xFF,0xFC,0xBF,0x8F,0xFF,0xFD,0xF3, 0xBF,0xED,0x9E,0xFC,0xBF,0x6F,0xF5,0xD3, +0xDF,0xFF,0xDB,0xD6,0xF5,0xEF,0xFD,0xFE, 0xFF,0xB9,0xFF,0x1F,0xD2,0xA9,0xAF,0xFF, +0xDB,0xF7,0xBF,0xEF,0x46,0xFF,0xFF,0xAD, 0xEB,0x7A,0xDF,0xEF,0xF7,0xFF,0x7F,0xF7, +0x9F,0xED,0xFF,0x7F,0xFF,0xAD,0xEB,0x7F, 0xF5,0x6F,0xFF,0xFD,0xFB,0xD6,0xF4,0xF7, +0xFB,0xF9,0x7E,0x7F,0xFF,0x5F,0xC2,0xFE, 0xBF,0xFD,0xFB,0x33,0xDF,0xF9,0x5B,0xFF, +0xFF,0xDD,0x67,0x7D,0xCF,0xEF,0xDB,0xEC, 0xFF,0x77,0xDD,0xF7,0xFD,0xFF,0xFF,0xDE, +0xA7,0xBF,0xD4,0x9F,0xFF,0xFF,0xBF,0xEF, 0xFE,0xFF,0xDF,0xEF,0xBB,0xFF,0xFF,0xEF, +0xEB,0xFA,0xFF,0xEF,0xBD,0xFB,0xFF,0xE2, 0x7F,0xFF,0xDF,0xDF,0xF7,0xFD,0xBF,0xBB, +0x73,0xF7,0xFD,0x7F,0xDF,0xDE,0xF7,0xBF, 0xEA,0xDB,0xF6,0xFF,0xD6,0xFF,0xFF,0x66, +0xFF,0xBE,0xFF,0xBF,0x6B,0xD9,0xF6,0xDF, 0xFF,0xFB,0x7E,0x7F,0xB7,0x7E,0xFF,0xFE, +0xFF,0xCD,0xFF,0xFE,0x7F,0xFF,0xFC,0xFD, 0x3F,0xFB,0xFB,0xF7,0xFF,0xFF,0xFB,0xF6, +0x7D,0xFE,0x7F,0xFF,0xFC,0xFF,0xB9,0xFF, 0xF9,0xFA,0xFE,0xBF,0xAF,0x5B,0xD6,0xED, +0xAD,0x7B,0xF6,0xF9,0xBF,0xEF,0xF8,0xFA, 0xFE,0xBF,0xFE,0xE6,0xFF,0xFF,0xF7,0xFD, +0xFF,0x7F,0xBF,0xEF,0xF3,0xFF,0xFF,0x6F, 0xF7,0xFE,0xFF,0xFF,0xF7,0xFD,0xFE,0xF7, +0xEF,0xFF,0xFB,0xEF,0xFB,0x7E,0xDE,0xFE, 0xFF,0xBF,0xFF,0xFE,0xFF,0xFF,0xFB,0xFF, +0xFF,0xEF,0xFB,0x6F,0xFC,0x1F,0xFE,0xE7, 0xFF,0xFF,0xFF,0xEF,0xFF,0xD3,0xB4,0xBB, +0xFF,0xFF,0xFD,0xBF,0x6F,0xE3,0xFE,0xFF, 0xBF,0xFC,0xBF,0xF7,0xCF,0xF7,0xFD,0xFF, +0x2F,0xDF,0xAB,0xEA,0xFF,0xDF,0xE7,0xEA, 0x9A,0xAF,0xEF,0xFB,0xFE,0xFF,0xF5,0x3F, +0xFD,0x7E,0xFF,0xD7,0xF5,0xFB,0xFF,0xFD, 0xF7,0xFF,0x7F,0xFE,0xF7,0xFD,0xFF,0xD7, +0xFF,0xD7,0x7F,0xEE,0x7F,0xFA,0x79,0xFE, 0x2F,0x8B,0xE6,0xF9,0xFE,0x3F,0x9E,0xF9, +0xBE,0x2F,0x0B,0xE7,0xF9,0xFE,0x2F,0x9F, 0xFD,0xFF,0xFE,0x7D,0x7F,0x5F,0xD7,0xFF, +0xFF,0x7F,0xFF,0xFD,0xFF,0x7F,0x5F,0x97, 0xFF,0xFD,0x7F,0x5F,0xFF,0xE3,0xFF,0xFF, +0xFA,0xFE,0xBF,0xAF,0xFB,0xFB,0xFF,0xFF, 0xCF,0xEB,0xFE,0xBF,0xAF,0xFF,0xFA,0xFE, +0xBF,0xFF,0x87,0xFF,0xFF,0xF5,0xFF,0xFF, 0xFF,0xFF,0xFD,0xFF,0x7F,0xFF,0xFF,0xFF, +0xFB,0xFF,0xFF,0xF5,0xFF,0xFF,0xFE,0x0F, 0xFF,0xFD,0xEB,0xFF,0xFF,0xF7,0xFF,0xEF, +0x7B,0xDF,0xFE,0xFF,0xFF,0xDF,0xF7,0xFD, 0xEB,0x7F,0xDF,0xFF,0x5F,0xFF,0xFF,0xFF, +0xFF,0xFD,0xBF,0xFF,0x7E,0xFA,0xBF,0xC7, 0xDB,0xF7,0xBD,0x3F,0xFB,0xFF,0xF6,0xFF, +0xFA,0xAF,0xFF,0xEB,0xFA,0xFE,0x3F,0x2F, 0xEA,0xFA,0x3E,0xAD,0xC9,0xBA,0xF6,0xAD, +0xAF,0xEB,0xFA,0xF6,0xBF,0xFE,0x7F,0xFF, 0xFF,0xFD,0xFF,0xF1,0x7F,0x3F,0xCF,0xF1, +0xEF,0xFF,0x7F,0xFF,0xBC,0xDF,0xDF,0xF7, 0xDD,0xFF,0xE0,0x7F,0xFF,0xFF,0xFE,0xFF, +0xFA,0xEC,0xBB,0x7F,0x5F,0xFF,0xFB,0xEC, 0xFF,0xEF,0xB7,0xFF,0xF7,0xFF,0xFF,0xB5, +0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xEE,0xDF, 0x5F,0xDF,0xDE,0xFF,0xAE,0xE7,0x77,0xFF, +0xFF,0xDF,0xF7,0xFF,0xE3,0xFF,0xFA,0xBB, 0xFE,0xFF,0xAF,0xFD,0xFB,0xFE,0xBF,0xAB, +0xF9,0xFE,0xFF,0xBF,0x7F,0xBF,0xFE,0xBD, 0xFE,0xD7,0xFF,0x9F,0xFD,0xFF,0xBE,0xEF, +0xFF,0xEE,0xFD,0xBB,0x5B,0xEF,0xFF,0x7F, 0xEF,0xFF,0xEF,0xFF,0x7F,0xFF,0x4F,0xFF, +0xEF,0xFB,0xBC,0xFC,0xFF,0xFF,0xFF,0xFE, 0xFE,0xFD,0xFA,0xFE,0xFB,0xFF,0xFD,0xF3, +0xFB,0xFF,0xF8,0x5F,0xFF,0xFF,0xD7,0xF5, 0xFD,0xDF,0xEF,0xFF,0xF3,0xDC,0x5F,0xCE, +0xF5,0xBD,0xFF,0xFF,0xD7,0xFF,0xFF,0xF9, 0x3F,0xFF,0xDF,0xF7,0xFF,0xFE,0xFF,0xFD, +0xFF,0xFB,0xFF,0xF7,0xB9,0x7D,0xFE,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF9,0x7F,0xFF,0xFE, +0xFF,0xFF,0x7F,0xFF,0xFE,0xFF,0xFF,0xF7, 0xF6,0xFF,0xBF,0xF1,0xF8,0xFF,0xFF,0xFF, +0xFF,0xE0,0xFF,0xFF,0xFF,0xFF,0xF9,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF, +0x9B,0xFB,0x7F,0xFF,0xFF,0xFF,0xC1,0xFF, 0xDF,0xFF,0x3F,0x5F,0xD7,0xBF,0xEF,0xBB, +0xDE,0xEE,0xFF,0x7F,0xDF,0xFF,0xFE,0xF5, 0x7F,0xDF,0xFF,0x99,0xFF,0xFF,0xFA,0xFF, +0xBF,0xFD,0xEB,0x7A,0xFF,0xB7,0xFE,0xFE, 0xFF,0xFF,0xEF,0xFF,0xFF,0xFD,0xBF,0xFF, +0x97,0xFF,0xFD,0xF7,0xFF,0x7F,0xF7,0xFF, 0xFF,0xFD,0x5F,0xFE,0xF3,0xF9,0xDF,0xDF, +0xFF,0xFF,0xFC,0xFF,0xFF,0x83,0xFF,0xFF, 0xFE,0xFF,0x9E,0xEC,0xFB,0xEE,0xFF,0x9F, +0xBF,0xEF,0xFF,0xFE,0xED,0x7B,0xFF,0xFF, 0xFF,0xF1,0x5A,0xFF,0xFF,0xFD,0xFF,0x7C, +0x69,0x3B,0xDF,0xFF,0x7F,0x1F,0xDF,0xFF, 0xFD,0xBA,0xFF,0xFF,0xFB,0xFF,0x5B,0xBD, +0xFF,0xFF,0xFF,0xFF,0xD7,0xB6,0xED,0xE9, 0xFF,0xD6,0xBD,0x6F,0x5F,0xFB,0xFF,0xEF, +0xFF,0x5F,0xFE,0xF6,0x6F,0xFF,0xFF,0xFF, 0xFF,0xF7,0xEB,0x7A,0xDF,0xFF,0x9F,0x7F, +0x7F,0xFF,0xB7,0xFF,0xFF,0xFE,0xDF,0xFF, 0x6C,0xFF,0xFB,0xFF,0xBB,0x6F,0xEB,0xFE, +0xCC,0xF7,0xA5,0xFA,0x5C,0xF5,0x75,0xBB, 0xB7,0xDF,0xFE,0x6F,0x5F,0xC5,0xBF,0xFD, +0x7B,0xFE,0xFF,0x95,0xE7,0x29,0xCF,0x4F, 0xF5,0x91,0xEE,0x6B,0xDF,0xEF,0xFD,0x54, +0xF5,0xBD,0xB1,0xFF,0xEF,0xEE,0xFB,0xBE, 0xBF,0xAF,0xFE,0xDE,0xBD,0x6F,0xDA,0xF2, +0xFF,0xAF,0xBE,0xFF,0xFF,0xFD,0x7E,0xA7, 0xFF,0xF7,0xFF,0xBF,0xEF,0x7B,0xF6,0xFD, +0xBD,0x4A,0xF2,0x85,0x85,0xBF,0x5B,0xFE, 0xB5,0xFD,0xFA,0xFF,0x4F,0xFF,0xFE,0xDF, +0xFF,0xED,0xFF,0xBF,0xFF,0xBF,0x7F,0xFE, 0xFF,0xB7,0x6D,0xFF,0xF7,0xBF,0xBF,0xEF, +0xFD,0x1F,0xFF,0xFE,0x7D,0xFF,0x67,0xFF, 0xFF,0xFF,0x3F,0x7F,0xFE,0xBF,0xFF,0xE7, +0xDF,0xE7,0xFF,0xEF,0x6B,0xFC,0x1F,0xFF, 0xBF,0xEF,0xFB,0xFE,0xDE,0xBF,0xAF,0xFA, +0xFF,0xB6,0xEF,0xF9,0xFE,0xFF,0x8F,0xEF, 0xDB,0xEF,0xAB,0x6F,0xFB,0xFE,0xFF,0xFF, +0xEF,0xFD,0xFF,0x7F,0xFF,0xFF,0xDE,0xFF, 0xFF,0xEF,0xFF,0xFF,0xFF,0x3F,0xFF,0x6C, +0xFF,0xBF,0xFB,0xFF,0xFE,0xFF,0xFB,0xFE, 0xDF,0xFF,0xFF,0xEF,0xFF,0xFF,0xBF,0xFF, +0xFF,0xFE,0xFB,0xFF,0xD5,0x7F,0xFF,0xFF, 0xEF,0xFB,0xFF,0xFF,0xBF,0xEF,0x43,0xB5, +0xFD,0x6F,0xCF,0xD6,0xBE,0x3F,0x7F,0xDB, 0xFE,0xC3,0xFF,0xFD,0xFF,0xAF,0xEB,0xFB, +0xFC,0xFF,0x3E,0xEF,0xE8,0xFA,0xBD,0xCD, 0xAA,0xFE,0xFE,0x7D,0xCF,0xFF,0xB7,0xFF, +0xF7,0xFF,0xFF,0xFF,0xFD,0xFF,0x75,0xCD, 0x52,0xD7,0xFD,0xFB,0xF7,0xDD,0xFB,0xEF, +0xEB,0xFF,0xFF,0x4F,0xFF,0xBF,0x9F,0xE7, 0xF9,0xFC,0x7F,0x8B,0xC3,0xF9,0xAF,0x8F, +0xE7,0xE9,0xBE,0x7F,0x9F,0xE6,0xF9,0xFC, 0x5F,0xFF,0xFF,0xF7,0xFD,0xFF,0x7A,0x5F, +0xD7,0xED,0xFF,0xFF,0xD7,0xFF,0xDD,0x7F, 0xE7,0xFF,0xFC,0xFF,0xFC,0x3F,0xFF,0xFF, +0xFF,0xFB,0xFF,0xFE,0xBF,0xAF,0xFF,0xFD, 0xFF,0xEF,0xFF,0xEB,0xFF,0xFF,0xFF,0xFF, +0xFF,0xF7,0x7F,0xFF,0x7F,0xDF,0xFF,0xFD, 0xFD,0x7F,0xFE,0xF7,0xFD,0x7F,0xDF,0xFF, +0xFD,0xFF,0xFF,0xDF,0xFB,0xFF,0xEE,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7A,0xDF,0xF5, +0xFD,0xFA,0xDF,0xF7,0xFC,0xFF,0x7F,0xDF, 0xBF,0xED,0xFF,0xC9,0xFF,0xDF,0xFF,0xBF, +0x2F,0xFB,0xFF,0xBC,0xAD,0xFF,0xF7,0xFF, 0xFF,0xEF,0xD3,0xFF,0x7D,0xBF,0x6F,0xFF, +0xFA,0xFF,0xFE,0xBF,0xAE,0xEA,0xFA,0xBE, 0xAD,0xA5,0xEB,0xCE,0xBF,0xA7,0xEB,0x5A, +0xDE,0xBD,0xAF,0x6B,0xFD,0x57,0xFF,0xFF, 0xF4,0x7F,0x1F,0x7F,0xFD,0xFF,0x7F,0x36, +0xF0,0xDF,0x79,0xFF,0xFF,0xFF,0xF7,0xFD, 0xBF,0xFF,0x87,0xFF,0xFB,0xF3,0xFC,0xFF, +0xFF,0xFF,0xFF,0x7E,0xFF,0xBF,0xDF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xF8,0x9F, +0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFD, 0xF7,0xFC,0xBD,0xFF,0xFE,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFB,0xF9,0xBF,0xFF,0xFF,0xEB, 0xE2,0xFE,0xFF,0xBF,0xEF,0xA9,0xBA,0x2F, +0xEB,0xF9,0xFE,0x77,0xDF,0xF7,0xFF,0xFF, 0xF9,0x7F,0xFF,0xFF,0x7F,0xEF,0xD7,0xFF, +0xFD,0xFF,0xFB,0xF5,0xFF,0xBF,0x6F,0xDF, 0xFF,0xFF,0xFD,0xFF,0xFF,0xF0,0xFF,0xFF, +0xFF,0x3F,0xCF,0xFF,0xBA,0xEE,0x9B,0xBF, 0xEE,0xD7,0xFE,0xCD,0xEF,0xFF,0xDF,0xBF, +0xFF,0xFF,0xC5,0xFF,0xFF,0xFD,0x7F,0x4F, 0xFD,0xF6,0xD9,0xFF,0x4F,0xD6,0xFD,0xBF, +0x6E,0xFF,0xFF,0xF4,0x7F,0xFF,0x7F,0x8B, 0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xF9,0xFE, +0x37,0xFF,0xD9,0xFB,0xF5,0xAF,0xFD,0xFF, 0xFF,0xFB,0xFF,0xFF,0x07,0xFF,0xFF,0xFF, +0xFB,0xF7,0xFF,0xFD,0xFF,0x7C,0xFA,0x7E, 0x4F,0xFC,0xDF,0x1D,0xC7,0xFF,0xFF,0xFF, +0xFF,0xAE,0xFF,0xFF,0xFF,0xFF,0xFD,0xFB, 0xFF,0xFF,0xFE,0xFE,0xFC,0xFF,0x7F,0x7F, +0xBF,0xEF,0xFE,0xFF,0xFF,0xFF,0x5F,0xFD, 0xFF,0xFF,0xFF,0xFD,0x6F,0x5A,0xD7,0x7B, +0xBE,0x5F,0xFE,0x39,0xFF,0xF7,0xFF,0xF7, 0xFD,0xFE,0xAA,0x1F,0xFF,0xFF,0xFF,0xFF, +0xFE,0xFE,0xAB,0xAF,0xFD,0xFE,0xBF,0xFF, 0xF7,0xFF,0x7F,0xFE,0x8F,0xE3,0xFB,0xEE, +0x7F,0xFF,0xFF,0xFF,0xFF,0xEB,0xFB,0xFF, 0xFD,0xBF,0xEF,0xDF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFB,0xE4,0x3F,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF3,0xEF,0xBB,0xFB, +0xBF,0xEF,0xBB,0xFF,0xD7,0xBF,0xFF,0xFF, 0xFF,0x29,0xAF,0xF7,0xFF,0xFF,0xFB,0xFF, +0xFB,0xE6,0xFF,0x0F,0xFB,0x3F,0xDF,0x0F, 0xFF,0xAF,0xFF,0xFF,0xFF,0xF5,0xC3,0xDF, +0x5F,0xFF,0xFF,0xFF,0xFE,0x6B,0xCA,0xBE, 0xBC,0xFF,0x9F,0xF2,0xBF,0xFF,0xFE,0xFA, +0xFF,0xFF,0xEF,0x16,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFC,0xDF,0x97,0xFD,0x79,0xFF,0x37, +0xE7,0x7F,0xFF,0xFF,0xB5,0xFF,0xFF,0xF6, 0x2F,0xFF,0xFD,0xFB,0xFE,0xFF,0xFF,0xFD, +0x5F,0x57,0x5F,0xFF,0xDB,0x52,0xDF,0xFF, 0xFD,0xBF,0xFF,0xFF,0xFC,0xDB,0xFF,0x7B, +0xB5,0xFD,0x7F,0xFF,0x71,0x9C,0x6E,0xFF, 0xF6,0x35,0xA5,0x9B,0xFF,0xFF,0xFD,0xFF, +0xFF,0xDB,0x9E,0x7F,0xFE,0xEF,0xFB,0xFF, 0xFF,0xBD,0xEF,0xFF,0xDE,0xB7,0xF9,0x4B, +0xFF,0xF5,0xEF,0xFF,0xFF,0xFF,0xE8,0x7E, 0xFF,0xEA,0xDF,0xF7,0xFF,0xFD,0x69,0x5B, +0xFC,0x9F,0xEF,0x78,0xD6,0xFF,0xEB,0xEF, 0xFF,0xFF,0xFF,0xE8,0xFF,0xFF,0xED,0xFF, +0xFF,0xFF,0xFF,0xE3,0xF9,0xF6,0xBF,0xFF, 0xFF,0xFE,0xDF,0xFF,0x7F,0xFF,0xFF,0xFF, +0xD1,0xFF,0xFF,0xE7,0xFF,0xFF,0xFF,0xFF, 0xE7,0xF9,0xFF,0xBF,0x7F,0xD9,0xFF,0xFD, +0xFE,0x7F,0xFF,0xFE,0xFF,0xF9,0xFF,0xFB, 0xD6,0xDF,0xBF,0xEF,0x5B,0xD6,0xFF,0xBF, +0xFB,0xF6,0xFF,0xBF,0xEF,0xF8,0xF6,0xDD, 0xBE,0xFE,0x16,0xFF,0xBF,0xEF,0xFF,0xFE, +0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0x6F,0xFB, 0xFF,0xFF,0xFF,0x6F,0xF3,0xFF,0xF7,0xEF, +0xFB,0xFF,0xBF,0xFF,0xEF,0xFE,0xFF,0xBF, 0xFF,0xFF,0xFF,0xBE,0xBF,0xFF,0xEF,0xFF, +0x7F,0xEF,0xFF,0xFD,0x17,0xFB,0x7B,0xFF, 0xFF,0xFD,0x7F,0xDB,0xF6,0xF4,0x7F,0xFA, +0xFE,0xF5,0xBF,0xEB,0xE3,0xF7,0xFF,0xFF, 0xE9,0xBF,0xFF,0xAF,0xF7,0xFD,0xF3,0x7E, +0x8F,0xA3,0xEA,0xFF,0xCB,0xF3,0xEE,0xFF, 0xBF,0xEF,0xF7,0xF9,0xFF,0xFE,0x7F,0xFF, +0xFF,0xFF,0xFF,0xF5,0xFB,0xF6,0xFF,0xF5, 0x2F,0xFE,0xFB,0xD7,0xBF,0xFF,0xBE,0xDF, +0x9F,0xFF,0xF0,0xFF,0xFF,0xF9,0xFE,0x7F, 0x8F,0xA3,0xF8,0xFE,0x6F,0x9F,0xF9,0xF6, +0x2F,0x9F,0xE7,0xF9,0xFE,0x2F,0x9F,0xE1, 0xFF,0xFF,0xFF,0x7F,0xDF,0xF7,0xF5,0xFD, +0x7F,0x7F,0xF5,0xFF,0x9F,0x5F,0xFB,0xFE, 0xFF,0x7F,0xFF,0xFF,0xCB,0xFF,0xFF,0xFB, +0xFE,0xFF,0xBF,0xAF,0xFB,0xFE,0xFF,0xDF, 0xFE,0xFE,0xBF,0xF7,0xFF,0xFF,0xFF,0xFF, +0xFF,0xC7,0xFF,0xFF,0xFD,0xFF,0x7F,0xDD, 0xF7,0xFD,0xFF,0xFF,0xD7,0xFF,0xFD,0x7F, +0xFF,0xFB,0xFD,0xFF,0xFF,0xFE,0xEF,0x7F, 0xFD,0xEF,0xFB,0xFE,0xFB,0xFD,0xFF,0x7F, +0xDF,0xFD,0xFF,0x7A,0xDF,0xF7,0xFD,0xFF, 0xFF,0xFF,0xFF,0x1F,0xFF,0xFF,0xD3,0xF7, +0xFF,0xFF,0x6F,0xDB,0xFF,0xFF,0xEF,0xCB, 0xF4,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE, +0x29,0xFF,0xE8,0xDA,0x76,0x9F,0xAF,0x6A, 0xDA,0xFE,0x35,0xEB,0xDA,0xD6,0xBF,0xAB, +0xEB,0x7A,0xDE,0xBF,0xD7,0x7F,0xFF,0xFE, 0xFF,0xBF,0xEF,0xFD,0xDF,0x77,0xBF,0xFD, +0x37,0xEF,0xFF,0xEF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFE,0x7F,0xFF,0xFF,0xFF,0xF7,0x7E, +0xDF,0xFF,0xFF,0xFF,0xFA,0xB7,0x7F,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0x89,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x9F,0xFB,0xFF,0xFF,0xFF,0xE7,0xFF, +0xFF,0xFF,0xFF,0xAA,0xFF,0xAB,0xFB,0xFA, 0xEF,0xBF,0xFF,0xDF,0xFA,0x7B,0xB9,0xFE, +0xFE,0xFF,0xFD,0xFF,0xF7,0xFE,0x3F,0xFF, 0xB7,0xFF,0xF7,0xEE,0xFF,0x7F,0xEF,0xFF, +0xFF,0x7F,0xFF,0x1F,0xFB,0xFF,0xBF,0xFB, 0xFE,0xFF,0xBD,0xFF,0xFF,0x2F,0xFF,0xBF, +0xFF,0x7F,0xDF,0xFA,0xFF,0xFF,0xFC,0xEE, 0xF5,0xF3,0xBE,0xFB,0x0F,0xEF,0xF3,0xBE, +0xEF,0xFC,0x5F,0xFF,0x5A,0xFF,0xF7,0xDF, 0xFF,0xFF,0xFE,0xD5,0xFC,0x5F,0xFB,0xF2, +0xFF,0xFF,0x2F,0xBB,0xF3,0xFF,0xFF,0xBF, 0xFF,0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, +0xBF,0xFF,0xFF,0xFD,0x7B,0xFF,0xDF,0xB9, 0xFF,0xFB,0xFF,0xD8,0x7F,0xFF,0xFF,0xFF, +0xFB,0xFF,0xFC,0x7F,0x1F,0xBF,0xE0,0xDF, 0xF7,0xEF,0xFF,0xFD,0x7F,0xFE,0xDF,0xFF, +0xE0,0xFF,0xFF,0xFD,0xEF,0xFB,0xFF,0xFE, 0xF7,0xDF,0xFF,0xEB,0x5F,0xFF,0xF7,0xFF, +0xFF,0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0xFD, 0xFF,0xFF,0xFF,0xF7,0xFD,0xFF,0x3B,0xDC, +0xFD,0x6D,0x7B,0x5F,0x57,0xF5,0xFD,0x7F, 0x5F,0xFF,0xB1,0xFF,0xEB,0xFF,0xFF,0xFF, +0xFB,0xFB,0xFE,0xFF,0xBF,0xFB,0xBE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xAF,0xFE,0xF7, +0xDF,0xDF,0xFF,0xFF,0xFF,0x7F,0xCF,0xF3, 0xF8,0xFF,0xD7,0xFB,0xFF,0x5F,0xBF,0xF7, +0xFB,0xFF,0x7F,0xFE,0x23,0xFF,0xFF,0xFE, 0x7F,0xF3,0xFF,0xFB,0xFE,0xFF,0xFF,0xF3, +0xFF,0xFF,0xF5,0xF9,0xFF,0x3F,0xFF,0xFF, 0xF0,0x9A,0xFF,0xBE,0x7F,0xFF,0xFC,0xF9, +0xFF,0xFD,0xAF,0xEB,0xFE,0xBF,0xFF,0xCF, 0xF3,0xFE,0x7F,0xFF,0xFF,0x5B,0xBD,0xFF, +0xBC,0xEB,0xFF,0xD7,0xD4,0xAF,0xAF,0xFD, 0xFF,0xCF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, +0xFD,0xFE,0xFF,0x6F,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFD,0x7F,0x5E,0xFD,0xBF,0xDB,0xF6, +0xFD,0xBF,0x6F,0xFB,0xEE,0xFD,0xFF,0x7A, 0xFF,0xFA,0xFB,0xFF,0x3F,0xFB,0xB7,0x5F, +0xD6,0xF7,0x1F,0x71,0xDC,0x77,0x1D,0xC7, 0x31,0xDC,0x77,0xDF,0xF9,0xBF,0xF5,0x5B, +0xF4,0xD7,0x9D,0xAE,0xFF,0xBF,0xFD,0xBF, 0xDB,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFE, +0x3D,0x81,0xFF,0xEB,0xFE,0xFE,0xFE,0xFF, 0xEB,0x7A,0xDF,0x7D,0x77,0x7D,0xF5,0x79, +0xDF,0x57,0xDD,0xF5,0x7D,0x7E,0xE6,0xFF, 0xD6,0x3F,0xBF,0x7F,0xFF,0xD4,0xF5,0x3F, +0xBF,0xFB,0xBE,0xEF,0xB3,0xEE,0xFB,0x9E, 0xEF,0xBB,0xFE,0x8B,0xFF,0xFE,0xDF,0xB7, +0xED,0xFF,0xF7,0xFD,0xFE,0xFF,0xEF,0xBB, 0xEE,0xFF,0xBE,0xEF,0xBB,0xEE,0xEB,0xFC, +0x1F,0xFF,0xFF,0xFD,0xFF,0xE7,0xFF,0xF7, 0xFD,0xFF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB, +0xFE,0xFF,0xBF,0xEB,0xFA,0x1F,0xFF,0xB7, 0xEF,0x5B,0xFE,0xFF,0xAF,0xEB,0xDD,0xE7, +0xDE,0x77,0x9D,0xE7,0x79,0xDE,0x77,0x9D, 0xBF,0xE6,0x6F,0xFF,0xFE,0xFF,0xBF,0xEF, +0xFB,0xFE,0xFD,0xBF,0x6F,0xF6,0xFD,0xBF, 0x6F,0xDB,0xF6,0xFD,0xBF,0xFF,0x7E,0xFF, +0xFF,0xFB,0xFE,0xFE,0xFF,0xEF,0xFB,0xFD, 0xEF,0x7E,0xF7,0xBD,0xEF,0x7B,0xDE,0xF7, +0xBD,0xEF,0xFF,0xD5,0xFF,0xBF,0xFF,0xEF, 0xFE,0xFF,0xFC,0x3F,0x0F,0xE7,0xFE,0x7F, +0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFE, 0xF3,0xFF,0xFE,0xDF,0xAD,0xDF,0x67,0xEE, +0xFB,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFF,0x23,0xFF,0xFF, +0xFF,0xFF,0x7F,0xFF,0xF3,0xBC,0xDB,0xFE, 0xFB,0xFF,0xFB,0xBE,0xF7,0xFB,0xFF,0x7F, +0xDF,0xFF,0xCF,0xFB,0xFF,0x9F,0xE3,0xF9, 0xBE,0x3F,0x8F,0xE7,0x79,0xFF,0x9D,0xE7, +0xF9,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x5F, 0xFF,0xCF,0xF7,0xFF,0xFF,0xFF,0xDF,0xF7, +0xFE,0x7F,0xE7,0xF9,0xFE,0x7F,0xFF,0xFF, 0xFB,0xFE,0xFF,0xFF,0xBF,0xFF,0xBF,0xBF, +0xFF,0xFE,0xFF,0xBF,0xEF,0xFF,0xFD,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFD,0xFF, +0xFF,0x3F,0xFF,0xBF,0xFF,0xF7,0xFF,0xFF, 0x7F,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xE8,0xEF,0xFF, 0x5F,0xF7,0xBF,0xF9,0xFE,0xDF,0xB7,0xFD, +0xFF,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xDD,0xFF,0xF2,0xFF,0xBF,0xFF, +0xFF,0xBF,0xFF,0xFF,0x2F,0xF2,0xFF,0xBF, 0x2F,0x7B,0xD2,0xF7,0xBF,0x2F,0xFF,0xBB, +0xFF,0xEE,0x8F,0xAF,0xEB,0xFA,0xFE,0x3F, 0xA7,0x69,0xCE,0x8F,0xA4,0xEA,0xFA,0xEE, +0xB7,0xAE,0xEB,0xFD,0xC7,0xFF,0xF7,0xF7, 0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3E,0xF3, +0x74,0xFF,0x3F,0x4F,0xFF,0xE7,0xFF,0x3F, 0xFE,0xA7,0xFF,0xFF,0xDF,0xF7,0xB7,0xFF, +0xF7,0xFF,0xBA,0xEF,0x37,0xEB,0xFB,0xFE, 0xBF,0xFB,0xFE,0xF3,0xFF,0xF9,0xDF,0xFF, +0xBF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFD,0xDF,0xFF,0xFD,0xFF,0xFF,0xFB,0xFE, +0xFD,0xFF,0xFB,0xBF,0xFE,0x3F,0xED,0xFF, 0xDF,0xBE,0x3D,0xA7,0xFB,0xFA,0x3F,0xE6, +0xE1,0xFE,0xFE,0x3F,0xEF,0xE3,0xDF,0xF5, 0x7F,0xFE,0xFF,0x7E,0xFF,0xFF,0xFF,0xFF, +0xEF,0x6F,0xF6,0xFF,0x7D,0xEF,0xD7,0xDE, 0xFF,0x7D,0xEF,0xFF,0xF2,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0x7B,0xDE,0xFB,0xE6,0xEE, 0xEF,0x37,0x6E,0xF3,0x7E,0xEB,0x37,0xEF, +0xFF,0xC1,0xFF,0xFE,0xFF,0xF7,0xEF,0xFF, 0xFF,0xFF,0xBF,0x3F,0xD2,0xDF,0xBF,0x2F, +0x7B,0xE2,0xFF,0xFE,0x3B,0xBD,0xDB,0xFF, 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFE, +0xFF,0xFB,0xFF,0xFF,0xBF,0xFF,0xFB,0xDF, 0xFF,0xBF,0xFF,0xB7,0xFF,0xFF,0xBF,0xEF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF, 0x7F,0xFF,0x1F,0xEF,0xF1,0xFD,0xFF,0xF6, +0xAF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF, 0xFF,0xFF,0xFE,0x9F,0xFF,0xFF,0xFF,0x77, +0xEF,0xF7,0xFB,0xFF,0xFE,0x5F,0xFF,0xFF, 0xBF,0xCF,0xFB,0xF7,0xDD,0xF7,0xF5,0xFF, +0x5F,0xD5,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5, 0xFF,0xFB,0x0F,0xFF,0xFF,0xA9,0xEA,0x7A, +0xFF,0xAF,0x8F,0xFE,0xDF,0xAF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFB,0xDF,0xE5,0x5F, +0xFF,0xFF,0xFF,0xFF,0xFF,0xBD,0x57,0xFF, 0xFF,0x6F,0x77,0xBF,0xF7,0xFB,0xFF,0x7F, +0xBF,0xF7,0xFF,0xFC,0xBF,0xFF,0x9F,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF,0x1F, +0xCF,0xFF,0xFC,0xFF,0xFF,0xFF,0xFF,0xFB, 0x65,0xAF,0xF3,0x7C,0xFF,0x3F,0xDF,0xFF, +0xFD,0xE9,0xFE,0x7F,0xE7,0xFF,0xFE,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFD,0xE3,0xDF,0xFB, +0xDB,0xF6,0xFD,0xEF,0x5B,0xFB,0xFF,0xDF, 0xFC,0xFF,0x3F,0xDF,0xF3,0xFD,0xFF,0x7F, +0xDF,0xEF,0x66,0xFF,0xDF,0xAD,0xEB,0x7A, 0xDE,0xF7,0xF7,0xE7,0xD9,0xFD,0x9F,0x67, +0xD9,0xF6,0x7D,0x9F,0xE7,0xDF,0xF5,0x47, 0xFD,0x65,0x5B,0xD6,0xF4,0xFE,0xFF,0xEF, +0xFF,0x6D,0xF6,0xDD,0xB7,0x6D,0xDB,0x76, 0xDC,0xB7,0x7D,0xFA,0x9B,0xF6,0x6D,0x9D, +0x67,0x59,0xDF,0xF7,0xDD,0xFF,0xEB,0xFE, 0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xE3, +0xD1,0x9F,0xFF,0xBD,0xBF,0xEF,0xFE,0xF7, 0xBF,0xBF,0xF7,0xD7,0x7F,0xDD,0xF7,0x9D, +0xDF,0x7F,0xDF,0xF7,0xFF,0xE0,0x7F,0xFD, 0xC1,0xDF,0xF7,0xFD,0xC7,0x7F,0x7F,0xFB, +0xFF,0xBB,0xEC,0xFB,0x3E,0xFF,0xBF,0xEC, 0xFB,0xFF,0xD8,0x7F,0xBF,0x6C,0xFF,0xBE, +0xFF,0xBF,0xED,0xFF,0xEF,0xFE,0xFB,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEE,0xFF,0xC5, +0xFF,0xAF,0x6F,0xFF,0xFC,0xFD,0x3F,0xE7, 0xFF,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF, +0xEF,0xFB,0xFE,0xBF,0x89,0xFE,0xFA,0xBA, 0xFE,0xBF,0xAF,0xFB,0xF6,0xF5,0xD9,0x7D, +0x97,0x65,0xD9,0x74,0x5D,0x97,0x65,0xD3, 0xFE,0xD6,0xFF,0xBF,0xF7,0xFD,0xFF,0x7F, +0xBF,0xCF,0xFB,0xFE,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFF,0xF6,0x8F,0xFB, +0xFF,0xEF,0xFB,0x7E,0xDB,0xFE,0xFF,0xBE, 0xEF,0xEE,0xFB,0xBE,0xEF,0xBB,0xEE,0xFB, +0xBE,0xFF,0xFF,0xDF,0xFF,0x43,0xFF,0xFF, 0xFB,0xEF,0x5F,0xB7,0xFE,0x7F,0xE7,0xF9, +0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xF9, 0xBF,0xFE,0xAF,0x77,0xFD,0xFF,0x2F,0xAF, +0xA7,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xF1,0x7F,0xEF,0xDF, +0xFF,0x97,0xF5,0xEF,0xFF,0xDF,0xFF,0xFF, 0xBF,0xFF,0xBF,0xFF,0xFF,0xFE,0xFF,0xFF, +0xFF,0xE0,0xFF,0xFF,0xF9,0xFE,0x2F,0x8B, 0xE3,0xF8,0xBE,0x77,0x9F,0xF9,0xDA,0x77, +0x9D,0xE7,0x79,0xDE,0x77,0x9F,0xDD,0xFF, 0xFD,0xFD,0x7F,0x5F,0xD7,0xFD,0xFF,0x7F, +0xE7,0xFE,0x7F,0x97,0xE7,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFF,0xAB,0xFF,0xEF,0xFA,0xFE, +0xBF,0xAF,0xFF,0xFA,0xFF,0xFF,0xDF,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF, +0x67,0xFF,0xF7,0xF5,0xFF,0xFF,0xFF,0xDF, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xBD, 0xEB,0xFF,0xFF,0xF7,0xAD,0xEB,0xFF,0xDF, +0xFD,0xFF,0x3F,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0xFD, +0xBF,0xFF,0xCB,0xF4,0xFF,0x7F,0xD3,0xF7, 0xFD,0x3F,0x7F,0xD3,0xF7,0xFF,0xFC,0x3F, +0xFF,0xEA,0xFA,0xBE,0xAF,0xAB,0xEB,0xBA, 0xF4,0x95,0x6B,0x52,0xD4,0xAD,0x2F,0x4A, +0xD2,0xF6,0xBF,0xD2,0x7F,0xF7,0x3F,0xFF, 0xFF,0xF3,0x7F,0xFF,0xFF,0xF7,0xFF,0xBA, +0xDF,0xFB,0xFD,0xFF,0xBF,0xFF,0xFB,0xFF, 0xF8,0x7F,0xEA,0xFF,0xFE,0xFE,0xDF,0xFF, +0xF7,0xFF,0x7F,0xBB,0xFF,0xFF,0xBF,0xDF, 0xFB,0xFF,0xFF,0xBF,0xFF,0xB1,0x7F,0xFF, +0xFB,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF, 0xCF,0xFE,0xFF,0xFF,0xEF,0xFF,0xF7,0xFF, +0xFF,0xFF,0xF1,0xFF,0x69,0xBE,0xFA,0xBF, 0xAF,0xE2,0xFF,0xFE,0xFD,0xAF,0xF3,0xFE, +0xFF,0xBF,0xEF,0xFB,0xFC,0xFF,0xFF,0x07, 0xFD,0x95,0xDB,0xDF,0x7F,0xDF,0xAF,0xFF, +0xF7,0xAF,0x36,0xFE,0xBF,0x65,0xEB,0xF6, 0xFE,0x9F,0x6F,0xFE,0x07,0xFF,0xCF,0xFF, +0xF8,0xFE,0xFF,0xCF,0xFF,0xF6,0xFA,0xE7, 0xFB,0xFE,0xFF,0xBB,0xED,0xF9,0xFF,0xFF, +0xFF,0x5F,0xFF,0xFF,0xFF,0x75,0xFF,0xEF, 0x7E,0xFD,0xE0,0xE8,0x5E,0xD3,0xE5,0xF9, +0x3E,0x5F,0xD7,0xF7,0xFF,0xFA,0x2F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0x7F, +0x7F,0xD7,0xF5,0x7D,0x5F,0x57,0xD5,0xF5, 0xEF,0xFF,0xF3,0x7F,0xFC,0x7F,0xFF,0xC7, +0xF1,0xFF,0xFF,0x1F,0xCF,0xB0,0xFF,0x3F, 0xCF,0xF3,0xFC,0xFF,0x3F,0xCE,0xFF,0xE4, +0xFF,0xDF,0x7F,0xFE,0xF7,0xBB,0xFF,0xFF, 0xDF,0xEF,0xEE,0xFF,0xBF,0xEF,0xFB,0xFE, +0xBF,0xBF,0xEF,0xFF,0xD1,0xFF,0xFF,0xFF, 0xFD,0xFB,0xFF,0xFD,0xFF,0xFB,0x9F,0xE9, +0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xBF, 0xFF,0xB3,0xFF,0xFF,0xF7,0xFF,0xFF,0xAF, +0xF7,0xFF,0xB6,0x3F,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFA,0xFE,0xBF,0xFE,0xA7,0xFF, +0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF, 0xFE,0x9F,0xF7,0xF9,0xFF,0x7F,0x9F,0xE7, +0xFF,0xFF,0xFE,0xAF,0x6F,0xFF,0xFF,0xFF, 0x9F,0xFF,0xDF,0xFF,0x7D,0x5F,0xDD,0xFF, +0xFB,0xBF,0xE7,0xBB,0xFF,0xFB,0xDF,0x6D, 0x5F,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xEB,0xF7,0xFF,0xE7,0xEF,0xF7,0xFF,0xFF, 0x7F,0xFF,0xF7,0xFF,0xFC,0x8F,0xFF,0xEF, +0xFD,0xFE,0xFF,0xBE,0xF4,0xF2,0x7D,0xD7, 0xCF,0xFF,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xCF,0x6B,0xFF,0xBF,0x3F,0xFB,0xF2, 0xFC,0x7F,0xEB,0xFF,0x9F,0xFA,0xFF,0xFF, +0x3F,0xFF,0xF3,0xFF,0xFF,0xFD,0x70,0xF7, 0xFF,0xFF,0xBF,0xFF,0xFB,0xD7,0xFE,0xF5, +0x77,0xFF,0x15,0xDD,0x77,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFB,0xCD,0xBF,0xFF,0xFD,0xFF, +0xFF,0xDF,0x37,0xCD,0xF9,0xEC,0xFE,0xEF, 0xBB,0xF4,0xFB,0x3F,0x4F,0xB3,0xFF,0xFD, +0xCB,0xFF,0xE9,0x7E,0x54,0x9F,0xE5,0x4B, 0xB7,0xFF,0xDD,0x7D,0xC7,0x71,0xDD,0x77, +0x5D,0xD7,0x75,0xCD,0x7F,0xD6,0xFF,0xD3, 0xF6,0xF9,0x3F,0x6D,0x95,0xAF,0x7F,0xFE, +0xFF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xF6,0xC7,0xFF,0xAD,0x7B,0xCA,0xFF, +0xBF,0xBF,0xEF,0xFD,0xE3,0xDF,0xB7,0xED, 0xFB,0x7E,0xDF,0x37,0xED,0xE3,0xFB,0xDF, +0xFF,0x52,0x5C,0x15,0xFD,0xCF,0x7F,0xDF, 0xFE,0xEF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEC, +0x7B,0xFE,0xFF,0xFE,0x3E,0x7F,0xDA,0xF7, 0xFD,0xFF,0x7F,0xFF,0xFF,0xFB,0xEF,0xBB, +0x6F,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF, 0xF7,0x7D,0xFF,0xD8,0xFF,0xFD,0xBF,0x7F, +0xFB,0xFF,0xFF,0x9F,0xFB,0xFE,0x7F,0x9F, 0xE7,0xF9,0xFE,0x7F,0x9F,0xEA,0x7F,0xF6, +0xBF,0xBD,0x6A,0x5A,0xF6,0xE5,0xBF,0x77, 0x5F,0x6D,0xDD,0x77,0x5D,0xD7,0x75,0xDD, +0x77,0xFF,0xA5,0xBF,0xCF,0xFB,0xFF,0xFF, 0xBF,0xCF,0xFB,0xFD,0xFF,0xBF,0xF3,0xFE, +0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD,0xAB, 0xFF,0xBF,0xBF,0xFF,0xFB,0xFF,0x7F,0xEF, +0xFF,0xBE,0xFB,0xEE,0xFB,0xBE,0xEF,0xBB, 0xEE,0xFB,0xBF,0xFF,0xB5,0xFF,0xD0,0xBC, +0xFD,0x2F,0x4B,0xF7,0xFF,0xFF,0x9F,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x9F, +0xFA,0x8F,0xFD,0xAB,0xFA,0xDA,0xBF,0xAF, 0xB3,0xFD,0xFF,0xBF,0xFB,0xFE,0xFF,0xBF, +0xEF,0xFB,0xFE,0xF7,0xBF,0xFF,0x9F,0xFF, 0x77,0xF7,0xBD,0xFD,0x77,0xDF,0xFF,0x7E, +0xDF,0xED,0xBB,0xFE,0xFF,0xBE,0xEF,0xFB, 0xFE,0xFF,0xFA,0x3F,0xFF,0xBE,0x6F,0x8F, +0xE6,0xF9,0xFE,0x7F,0x9F,0xC7,0xFE,0x7F, 0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFB, +0x7F,0xFF,0x7F,0xCF,0xFF,0xFD,0xFF,0xFF, 0xDF,0xFB,0xAF,0xBF,0xEF,0xFF,0xFE,0xFF, +0x9F,0xEF,0xFB,0xFF,0xFC,0xFF,0xFB,0xFE, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xF7, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF5,0xFF,0xFF,0xFF,0x3F,0xDF,0xF7, +0xFF,0xFF,0x7F,0xEF,0xFE,0xFF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xEF,0xFF,0xB3,0x7F, +0xFF,0x7B,0x5E,0xF7,0xFD,0xFF,0x7B,0x7F, 0xF7,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, +0xDF,0xF7,0xFF,0x17,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xDD,0xF6,0xFC,0xBF,0xCB,0xF2, +0xBC,0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xFE, 0x8F,0xFF,0xFA,0x7E,0xBF,0xA7,0xEB,0xDA, +0xFC,0xBF,0xAF,0x7A,0xFE,0xBF,0xAF,0xEA, 0xFA,0xFE,0xBF,0xAF,0xF4,0xDF,0xFE,0xFF, +0xF3,0x3C,0x7F,0x3E,0xFF,0xCF,0xF8,0xBF, 0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xE7,0xE8, +0xFF,0xFC,0x9F,0xFF,0xFF,0xCF,0xEB,0xB3, 0xE7,0xFB,0x7B,0xF3,0xFE,0xFF,0xCF,0xDB, +0xFB,0xFB,0xBF,0x6F,0x6F,0xDF,0xEC,0x7F, 0xFF,0xFF,0xF7,0xFD,0xFD,0xFF,0xFF,0xFF, +0xFF,0xB2,0xBF,0xFF,0xDE,0xFD,0xBD,0xEF, 0xFB,0xF6,0xDF,0xEA,0xE7,0xDB,0xFE,0xBB, +0xFF,0xEB,0xFB,0xBF,0x9F,0x8F,0xE8,0xFE, 0x3F,0x8F,0xA3,0xF8,0xFE,0x3F,0x8F,0xFF, +0xF8,0x7E,0xFD,0xFD,0x7F,0xFF,0xFB,0xCD, 0xFF,0xFD,0xFF,0x5F,0xEF,0xFD,0xFF,0xFF, +0xDF,0xF7,0xFD,0xFF,0xBE,0x90,0xFF,0xFF, 0xEE,0xFF,0x3F,0xBF,0xF3,0xBB,0xFE,0xB7, +0xAB,0xFA,0xFE,0xAF,0xAD,0xEA,0xFA,0xDE, 0xAB,0xFF,0x63,0xFF,0xFE,0xF2,0xFF,0xB3, +0xFF,0xDF,0xEE,0x7D,0xFF,0x03,0xF1,0xF4, 0x3F,0x1F,0xC3,0xF1,0xEC,0x7F,0xFE,0x6F, +0xFF,0xFB,0xFB,0xFF,0x9F,0xFF,0xBF,0xFF, 0x7B,0x5F,0xFD,0xFF,0xDF,0xF7,0xFD,0xFD, +0x7F,0x7F,0xDF,0xFE,0xCF,0xFB,0xFF,0xFF, 0xAF,0xFB,0xFF,0x1F,0xEF,0xA5,0xFD,0xBF, +0xDF,0xFB,0x7D,0xFF,0xBF,0xDF,0xFB,0xFF, 0xFD,0x3B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, +0xAF,0xF3,0xFF,0xFB,0x7F,0xBF,0xD7,0xFB, 0xBF,0x7F,0xBB,0xF7,0xFF,0xF8,0x7F,0xFF, +0xFA,0x5F,0xD7,0xFF,0xDF,0x7F,0xEF,0xFF, 0xFF,0x7F,0xDB,0xF7,0xFD,0xFF,0x7F,0xDF, +0xB7,0xFB,0xEC,0xFF,0xFF,0xF7,0xBF,0xEF, 0xFD,0xFC,0xFB,0xFF,0xEF,0xF0,0xFE,0x3F, +0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xEF,0x8D, 0xFF,0xFF,0xEF,0x7F,0xBF,0xFF,0xFB,0xFF, +0xDB,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0xD8,0xFF,0x2E,0x7F, +0xBE,0xEF,0xFE,0x6E,0xFF,0xBF,0xF9,0xFF, 0xFF,0xF3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFC,0x66,0xBE,0x47,0xF3,0x7F,0xDF,0xFE, 0x87,0x9F,0xFF,0xFF,0xFF,0xFF,0xE7,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xD6,0x6F,0x7C, 0xFB,0x4F,0xD2,0xFF,0xFD,0x2B,0xFE,0xFF, +0xFF,0xFD,0x5F,0xD7,0xD5,0xF5,0x7D,0xFF, 0xFF,0xFF,0xBF,0x9B,0xFF,0xFF,0xDF,0xB7, +0xFF,0xFF,0xDF,0xFF,0x3F,0xCF,0xFE,0x7F, 0xBF,0xEF,0xFB,0xFC,0xFF,0x3F,0xFF,0xD9, +0xBF,0xFE,0x97,0xEC,0x8F,0xB7,0xFE,0x9B, 0x7D,0xFD,0xB7,0xDD,0x77,0x1D,0xC7,0x71, +0xDD,0x77,0x5D,0xD7,0xF3,0x6F,0xFD,0x3F, 0x73,0xDD,0xAF,0xFD,0x7A,0xFF,0xFF,0xAF, +0xFE,0xFD,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0x66,0x7F,0xFF,0xFF,0xBF,0xBF,0xFF, +0xFB,0xFF,0xF7,0xDF,0xFD,0xFB,0x7D,0xDF, 0xB7,0xCD,0xF3,0x7C,0x5F,0x3F,0x91,0x3F, +0xFF,0x3D,0xEF,0x7B,0xFF,0xFC,0xFF,0xCA, 0xEF,0xFE,0xFF,0xBD,0xEF,0xFB,0x1E,0xE7, +0xBB,0xEC,0x7F,0xB3,0xFF,0xFD,0x9F,0xFF, 0xFF,0xFE,0xFF,0xFF,0x7F,0xBF,0xFB,0xFE, +0xFF,0xBF,0xEF,0xFB,0xEE,0xFB,0xBF,0xDF, 0x67,0xFF,0xFF,0xBF,0xEF,0xDB,0xFF,0xBC, +0xFE,0x7F,0xFB,0xFF,0x9F,0xEF,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x87,0xFF,0xEE, +0xFB,0xBE,0xE5,0xBF,0xEF,0xF9,0xD7,0x65, 0xF7,0xDD,0xE7,0x7D,0xDF,0x77,0x5D,0xD7, +0x7F,0xF8,0x9B,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xBF,0xEF,0xFB,0xFF,0x7F,0xCF, +0xF3,0xFC,0xFF,0xBF,0xEF,0xFF,0xDB,0x3F, 0xEF,0xFB,0xFE,0xFF,0xDF,0xFF,0xFE,0xFB, +0xBB,0xEF,0xBF,0xEF,0xBB,0xEE,0xFB,0xBE, 0xEF,0xBB,0xFF,0xFC,0x7F,0xFD,0x3B,0x5B, +0xD6,0xE5,0xFD,0x4F,0xC3,0xFB,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF, +0xB4,0xFF,0xFA,0xBC,0x8F,0xB2,0xE9,0xD2, 0x2E,0xCF,0xFB,0xFF,0xBF,0xEF,0xFB,0xFE, +0xFF,0xBF,0xEF,0xFB,0xFF,0xEC,0xFF,0xFD, 0xFD,0x7F,0xDF,0xF7,0xE4,0xDF,0x5F,0xFF, +0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xC3,0xFF,0xEF,0xE6,0xF8,0xFE, +0x3F,0x8B,0x83,0xF9,0xFE,0x7F,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x17, +0xFD,0xFF,0xFF,0xFF,0x7F,0x5F,0xF7,0x2C, 0xFF,0xFF,0xFF,0xFE,0x7F,0xFF,0xE7,0xF9, +0xFE,0x7F,0x9F,0xFE,0x2F,0xFF,0xFF,0xEF, 0xFF,0xFE,0xBF,0xEF,0xAD,0xFF,0xFF,0x7F, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFE,0xDF,0xFF,0xDF,0xFF,0xFD,0xFD,0x7F, +0xDF,0xF7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0x3F,0xFE, +0xF7,0xFD,0xEF,0x7A,0xFF,0xB1,0xBD,0xFF, 0x7F,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD, +0xFF,0x7F,0xF3,0x27,0xFF,0xDF,0xFF,0xDD, 0xFF,0xFC,0x9B,0xFF,0xCB,0xFC,0xBF,0x2F, +0xCB,0xF2,0xFC,0xBF,0x2F,0xC9,0xFF,0xDE, 0xFF,0xDF,0xAF,0xEB,0xDA,0xFE,0xBB,0xAF, +0xEB,0xF8,0xF7,0xAF,0xE8,0xFA,0xFE,0xBF, 0xAF,0xEB,0xF2,0xFF,0xFD,0xFF,0xFF,0xEF, +0xBD,0xD7,0xBF,0xFF,0xFF,0xDE,0x8F,0xB8, 0xDE,0x37,0x8D,0xA3,0x78,0xDA,0x3F,0x8F, +0xFF,0xA1,0xFF,0xFF,0xFB,0xFB,0xFF,0xFF, 0xFF,0xFF,0xA7,0xBD,0xFB,0x76,0xFD,0xBF, +0xEF,0xDB,0xFE,0xBB,0xBF,0xFE,0x27,0x7F, 0xFF,0xFE,0xFE,0xFD,0xF5,0xFF,0xEF,0xF5, +0xDF,0x1F,0xE7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xFF,0xCD,0xFD,0xAE,0xFF,0xFA, +0x3E,0x3F,0xAB,0xFD,0xF8,0x7E,0x8F,0xE3, 0xF8,0xFE,0x3E,0x8F,0xE3,0xF8,0xFF,0xFE, +0x1F,0xEF,0xDF,0xBF,0xFE,0xDE,0xDF,0xD9, 0xFF,0xDF,0xBC,0xFF,0xFF,0x7F,0xFF,0xEF, +0xFD,0x7F,0xDF,0xF7,0xF9,0x3F,0xFE,0xFF, 0xFF,0x6F,0xFE,0xDE,0xBF,0xF7,0xED,0xEA, +0xFD,0x8F,0x83,0xF8,0xEA,0x3F,0x8F,0xEF, 0xFF,0xF4,0x7F,0xFF,0xEF,0xEF,0x7B,0xF3, +0xF1,0x5F,0xFF,0xFF,0xF1,0x3B,0x7F,0xDF, 0xF7,0xFD,0xFF,0xFF,0xFF,0xFF,0xE0,0xFF, +0xFF,0xFF,0xF7,0xFF,0x6F,0xFF,0x7F,0xFF, 0xFF,0xF7,0xDE,0xF7,0xBF,0xEF,0xFB,0xF7, +0xFD,0xFF,0xFF,0xF5,0xFA,0xFF,0xFF,0xFB, 0xE7,0xFF,0xF3,0xF8,0x7F,0xF3,0xDF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x1F,0xEF, 0xBB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, +0xFF,0x7F,0xFF,0x9F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xCF,0xFF,0x37,0xFF,0xFF, +0x7F,0xDF,0x77,0x5D,0xE7,0xFC,0xFF,0xBF, 0xF7,0xF5,0xFB,0xFF,0xFF,0xD7,0xF5,0xFB, +0xFF,0xFF,0x45,0xFD,0x7F,0xEA,0xFD,0xBE, 0xBF,0xDF,0xF7,0xFF,0xFF,0xDB,0xFB,0xFE, +0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0xFB,0x5F, 0x7F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFE,0xFF,0xEF,0xFD,0xFF,0x7F,0xDF, 0xFF,0xEF,0xFB,0xF8,0x0F,0xF3,0xFF,0xF9, +0x2E,0xFB,0xFE,0xFC,0xF3,0xEF,0xFF,0xFF, 0xBF,0xFF,0xFB,0xE7,0xFF,0xFE,0x7E,0xFF, +0xC0,0x6B,0xCF,0xFF,0x34,0xDF,0xF1,0xFD, 0xFF,0xEF,0xFF,0xFF,0xFF,0xDF,0xF7,0xFD, +0xCF,0x7F,0x9C,0xFD,0xFD,0x6C,0xF7,0xFF, 0xF6,0xFD,0xEB,0x2B,0x9F,0xFF,0xFC,0xFE, +0x7E,0xFF,0xFF,0xFF,0xFF,0xD7,0xF3,0xF7, 0xFF,0xFB,0xE1,0xBF,0xFF,0xEB,0x7A,0xDE, +0xD7,0xFB,0xFF,0xF9,0xFE,0xFF,0xFF,0xF3, 0xDE,0x7F,0xFD,0xE7,0x7F,0xFF,0xFD,0xBB, +0xFF,0xFF,0x7E,0xCC,0xF6,0xAF,0x5F,0x7F, 0xFE,0xF4,0x7D,0xF7,0xFD,0xBB,0x6E,0xDB, +0xB7,0xFF,0xF7,0xDF,0x66,0xFF,0xFF,0xF7, 0x3D,0xCF,0xDE,0xBD,0xFF,0xFF,0xDE,0xDB, +0x8D,0xF7,0x7E,0xDF,0xB7,0xEF,0x7F,0xFF, 0xF6,0x87,0xFF,0xFF,0xEF,0xFE,0xDE,0xBF, +0xFF,0xFF,0xFF,0xBB,0xEF,0xFD,0xFF,0x7B, 0xDE,0xF7,0x3F,0xFF,0xBF,0xFB,0xDB,0xFF, +0xF2,0xB6,0xFD,0xBD,0x7F,0xE7,0xFF,0xFF, 0xFF,0x6F,0xF7,0xFF,0xFF,0xFF,0xFE,0x77, +0xFF,0xBF,0xF8,0xAF,0xFF,0xDF,0xBF,0xFF, 0xBF,0x7F,0xFB,0xFF,0xFF,0xFF,0xDB,0xFE, +0xFF,0xBF,0xFF,0xFA,0xFF,0xFD,0xFF,0xF6, 0x7F,0xFF,0x9F,0xFF,0xFF,0x3F,0xEF,0xF8, +0xEE,0x7E,0x9F,0xBA,0xFE,0xBF,0x8F,0xEF, 0xFE,0xFE,0xF9,0xFF,0xFA,0x7F,0xFE,0x7E, +0xBF,0xAF,0xFB,0x96,0xFD,0x9F,0xEF,0x5E, 0x65,0xBE,0xEF,0x5B,0xB6,0xFF,0xBE,0xE3, +0xFF,0xB5,0xBF,0xFF,0xFD,0xFF,0x7F,0xFF, 0xEF,0xDF,0xFE,0xFF,0xBF,0xFB,0xFE,0xFF, +0xBF,0xCF,0xFF,0xFF,0xFF,0xFD,0x9B,0xFF, 0xFE,0xFB,0xFE,0xDF,0xFF,0x7F,0xFF,0xF7, +0xFE,0xFF,0xDF,0xFB,0xFB,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xB7,0xFE,0xFA,0xFF,0xAB, +0xEF,0xFF,0xFD,0xB5,0x7B,0x7F,0xFB,0xF7, 0xFD,0xFF,0xFF,0xDD,0xFF,0xEF,0x8F,0xFF, +0x2F,0xFF,0xFB,0x7C,0xFF,0x3F,0xDF,0x73, 0xEB,0xFE,0x3F,0xFF,0xEF,0xFB,0xFE,0xFF, +0xEF,0xFD,0xFF,0xBF,0xFD,0x0F,0xFF,0xFF, 0xFF,0xF5,0xF9,0xFF,0x7F,0xD7,0xFD,0xFF, +0xDF,0xFF,0xF7,0xFB,0xFF,0x7F,0xBF,0xFF, 0xFF,0xF0,0x9F,0xFF,0xFE,0x7F,0x8B,0xE3, +0xF9,0xDE,0x27,0x9B,0xE6,0xBE,0x7F,0x9B, 0xC3,0xF8,0xDE,0x7F,0x9D,0xE7,0xFE,0x7F, +0xFF,0xFF,0x5F,0xD7,0xFF,0xFF,0xFF,0x4F, 0xFB,0xFF,0xFF,0x7F,0xFF,0xAF,0xFF,0x9F, +0x7F,0xFB,0xFF,0xE8,0xFF,0xFF,0xFE,0xBF, 0xAF,0xFF,0xFF,0xFE,0xBF,0xEF,0xF7,0xFF, +0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFC,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF, +0xFD,0x3F,0xCF,0xFF,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFD,0x7F,0xFF,0xFF,0x93,0xFF,0xFF, +0x7A,0xDF,0xF7,0xFF,0xFF,0x7B,0x7F,0xB7, 0xEF,0xFF,0xFF,0xFD,0xBF,0xFD,0xFB,0xFF, +0xF7,0xFF,0xD7,0xFF,0xFF,0xFF,0xFC,0x9F, 0x6F,0xCB,0xFF,0xF4,0xBB,0xDF,0xD6,0xFD, +0xBF,0x2F,0xD3,0xF7,0xFF,0xDF,0xFF,0xCF, 0xFF,0xFA,0xBE,0xBD,0xAF,0x6A,0xDA,0xBE, +0xBB,0xAB,0x3A,0xBE,0x2D,0xAE,0xEB,0xDA, 0xF6,0x3F,0xAD,0xF5,0xDD,0xFF,0xCF,0xF1, +0xFF,0xF9,0x7F,0xFF,0x73,0xFE,0xFF,0xCF, 0xC3,0xF4,0xF7,0x2F,0xF3,0xFF,0xFC,0xFF, +0x7C,0x1F,0xFF,0x3F,0x4F,0xFF,0x7E,0xFF, 0xEF,0xBD,0xF6,0xFE,0xFF,0x2B,0xEF,0xDC, +0xFB,0xFD,0xFF,0xFB,0xFF,0xEA,0x7B,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xF7,0xDF,0xFF, +0xE3,0x7D,0xFF,0xB7,0xFF,0xBF,0xFF,0xFF, 0xDF,0xFF,0xF8,0xFF,0xBF,0xFF,0xBF,0xEB, +0xE7,0xFA,0xFE,0x3D,0xBF,0xE9,0xFC,0xBF, 0xFF,0xFA,0xFB,0xFE,0xFF,0xFF,0xFF,0xD9, +0xFF,0xFF,0xFF,0xF6,0x7F,0xFF,0xF6,0x7D, 0xFF,0xDF,0xCF,0xFD,0xBF,0xFB,0xEF,0x7E, +0xFF,0x7F,0xFF,0xFF,0xD3,0xFF,0xFD,0xFB, 0xFF,0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xBF, +0xFE,0xFF,0xF7,0xEF,0xFF,0xFF,0xFF,0xFB, 0xFF,0x87,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF, +0x7B,0xFE,0xFF,0xFE,0x3B,0xF7,0xF7,0xFF, 0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF, +0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFF,0xAD,0xFF,0xFE,0xF7,0xFF,0xFF, +0x5F,0xFF,0xFF,0xDF,0xFF,0xFD,0xFF,0xF5, 0xFF,0xDF,0xFF,0xBD,0xFF,0xE9,0xFF,0xC7, +0xF3,0xFF,0xFF,0xF7,0xFF,0xF3,0xFF,0xF8, 0x3B,0xFF,0xFF,0x7B,0xDF,0xBF,0xFB,0xEF, +0xFB,0xFF,0xFB,0xF7,0xF7,0xBB,0xFF,0xFF, 0xFF,0xFF,0xFB,0xFF,0xFE,0x7F,0xF3,0x7F, +0x5E,0xB7,0xBF,0xFD,0x7F,0xFF,0xF9,0x7F, 0xFB,0xFF,0xEB,0xFD,0x7F,0x7F,0xFF,0xEF, +0xFB,0xE0,0x3F,0xFE,0xBF,0xBF,0xDF,0xFF, 0x7E,0xFF,0xF7,0xFF,0xFF,0xFE,0xBF,0xFF, +0xDB,0x78,0xFF,0xFF,0xFF,0xEE,0xA1,0xBF, 0xF5,0xDE,0xFB,0xF7,0xFF,0xFB,0xFF,0xFF, +0xFF,0xFF,0xFB,0xFF,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xEF,0xF0,0xFF,0xFF,0xFF,0xF3, +0xF7,0xFF,0xEF,0xFF,0xE7,0xCF,0xFF,0xFB, 0xFF,0xEF,0xFF,0xFF,0x9F,0x9F,0xEF,0xFC, +0x16,0xBF,0xFE,0xF3,0xE4,0xFF,0xFF,0xC6, 0xFF,0xE7,0xFF,0xFF,0xFD,0xFF,0xBF,0xFF, +0xFF,0x3F,0xFF,0xBF,0xD6,0xAF,0x7F,0xFE, 0x6B,0x7E,0x7F,0xFF,0xAF,0xFF,0xFF,0xBF, +0xFF,0x5F,0xFF,0xFE,0xFF,0xFF,0xFE,0xFF, 0xFF,0xBD,0xDB,0xFF,0xFE,0x5F,0xF2,0xFF, +0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xEF,0x7F,0xFF,0xFF,0xFF,0xFF,0xDE,0xBF, +0xFF,0xFF,0xEF,0xFB,0x77,0xFE,0xBD,0x7F, 0x5F,0xFF,0xFF,0xFF,0xDF,0x6F,0xED,0xFF, +0xFD,0xFF,0x7F,0xFD,0x6F,0xFF,0xFF,0x77, 0xDA,0xCF,0xFD,0x5F,0xFF,0xBF,0xFF,0xFF, +0xDF,0x7F,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF, 0x66,0x7F,0xFF,0xFE,0xBF,0xE7,0xBF,0xFA, +0xFF,0xFE,0xFF,0xFF,0xFF,0xDF,0xFF,0x59, 0xEF,0xFF,0xEF,0xFB,0x7F,0x89,0xFF,0xFF, +0xE9,0xFF,0x6F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xFF,0xFF,0x7F,0xF2,0xF7,0xFF,0xFF,0xEF, +0xF8,0x7F,0xFB,0xFF,0xFD,0xFF,0xFF,0xD9, 0xFF,0xEF,0xBB,0xFF,0xFF,0xFF,0xBF,0xEF, +0xDE,0xFF,0xFF,0x9F,0x7F,0xDF,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xAF, +0xFF,0xFF,0xF7,0x3F,0xEB,0x9F,0xFE,0x7F, 0x9E,0x7F,0x9F,0xFE,0x87,0xFF,0xED,0xDB, +0x56,0xFF,0xBF,0xAF,0x0B,0xD2,0xFF,0xEF, 0xDB,0x6E,0x7D,0xBD,0x6F,0xF8,0xFE,0x3F, +0xFA,0x5B,0xFF,0xFD,0xBF,0xEF,0xFF,0xBF, 0x6F,0xDB,0xE6,0xFF,0xFF,0x3F,0xFF,0xDF, +0xFE,0xFF,0xFF,0xFF,0xFF,0xDA,0x3F,0xFF, 0xFB,0xFE,0xFE,0xFF,0xFF,0xDF,0xF7,0xBD, +0xFF,0xFD,0xFF,0xFE,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xF1,0x5F,0xFD,0x9F,0xDF,0xFD, +0xFF,0xFD,0x7F,0xFF,0xFF,0xFF,0xFF,0x76, 0xFA,0xFF,0xFF,0x7F,0xE3,0xF8,0xFF,0xAE, +0xFF,0xFB,0x7E,0x9D,0x73,0xFF,0xFA,0x7F, 0xDF,0xFF,0xFF,0x7F,0xFF,0xFB,0xCD,0xFF, +0x7F,0xEF,0xFB,0xFF,0xFD,0xFF,0xF7,0x7F, 0x7F,0xEF,0xFF,0xED,0xFF,0xFF,0xFF,0xB5, +0xFF,0xBF,0xFF,0xBF,0xFD,0xEF,0xDB,0xF7, 0xFF,0x93,0xFF,0xEF,0xE2,0xF9,0xBE,0x7F, +0x8B,0xE7,0xF9,0xFE,0x6B,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x47,0xFF, +0xFF,0xFD,0xFF,0x9F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xF5,0xFF,0x9F,0xFF,0xF7,0xFE, +0xFF,0xBF,0xFE,0x6F,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xAF,0xFF,0xFF,0xFF,0x7F,0xFB, +0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xDF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF,0xDF, +0xFF,0xFF,0xFF,0x5F,0xFF,0xFF,0xFF,0xFF, 0x5F,0xFB,0xFE,0xFF,0xF8,0x37,0xFF,0xFF, +0xEF,0xFF,0x7F,0xFE,0xBF,0xFF,0xFF,0xFE, 0xBF,0xFF,0xFF,0x7F,0xFF,0xBF,0xFD,0xFF, +0x7F,0xFA,0x7F,0xFF,0xFF,0x6F,0xFF,0xFF, 0x7D,0xFF,0xCF,0xFF,0xFF,0xFF,0x4F,0xFF, +0xF2,0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0xBF, 0xFF,0xAE,0xEB,0xFA,0xFE,0xBB,0xAD,0xEB, +0xFA,0xF7,0xAF,0x6B,0xFA,0xF6,0xBF,0x25, 0xE9,0xF2,0x7F,0x45,0xFF,0xFF,0xFD,0xF7, +0xF7,0xBF,0xFF,0xDF,0xFF,0xFF,0xBF,0xFB, 0xFF,0xDF,0xF3,0xFF,0xF7,0x3F,0xCF,0xFF, +0xA1,0xFF,0xFF,0xBF,0xE7,0xFF,0xFF,0x7F, 0xFF,0x3D,0xFF,0xFF,0xFF,0xF7,0xFF,0x2F, +0xFF,0xFB,0xF5,0x7F,0xFE,0x57,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7, +0x3F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD,0xFE, 0xF7,0xEE,0xAF,0xFE,0xEE,0xE7,0xFA,0xFF, +0xFE,0x9D,0xF9,0x5E,0xFE,0xFF,0xEB,0xFF, 0xFF,0xDF,0xA7,0xFF,0xFF,0xFF,0xFC,0xDB, +0xFF,0xFF,0xFF,0x7E,0xFB,0xFF,0xFF,0xEF, 0xFB,0xFD,0xFF,0xDB,0xFF,0xFF,0xFF,0xEF, +0xFF,0xFF,0xFF,0xFD,0xBF,0xFE,0xBF,0xFF, 0x6F,0x7F,0xFF,0xF7,0xFF,0xFF,0xF9,0xFF, +0xF7,0xFF,0xBF,0xDE,0xF7,0xFF,0xFF,0xFF, 0xFA,0x7F,0xFD,0xBF,0x5F,0xFF,0xFF,0xBF, +0xFF,0xED,0xFF,0xF7,0xBF,0xFF,0xFF,0xEF, 0xFF,0xDF,0xFF,0xFF,0xFF,0xE6,0xFF,0xFB, +0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEB,0xFF, +0xFD,0xFF,0xF5,0xFF,0xF6,0x7F,0xDF,0xBD, 0xCF,0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF, +0xFF,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3, 0xFF,0xEE,0xBF,0xFF,0x7D,0xEF,0xFE,0xFF, +0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFE, 0xFF,0xFF,0xFF,0xFF,0xE7,0xFF,0xB5,0xAE, +0xFF,0xFF,0xB6,0xFE,0xBF,0xFF,0xFF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0x27,0xFF,0xEF,0xFE,0x7F,0xDF,0xFF, 0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFD,0xFF,0xF7,0xF9,0x9F,0xFF, 0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F, +0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x0F,0xFF,0xE7,0xBF,0xFE, +0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFC,0xBF, 0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xC4, +0x6B,0xFF,0x29,0x1F,0xFB,0xAF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0x1B,0xFE,0xFF,0xFC, +0x6F,0xFF,0xFF,0xFD,0x6A,0xF7,0xD7,0xF5, 0xBF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFE,0xBF,0xFF,0xFF,0xFA,0xFF,0xFF,0xF7, 0xFB,0xDD,0xBF,0xFF,0xE7,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0x7F,0xFF, 0xFF,0xF5,0xFF,0xFF,0xF7,0xFD,0xB3,0xEF, +0xFD,0x7E,0x5D,0xFF,0xFD,0xFF,0xFF,0xFF, 0xFD,0x7F,0xD2,0xF5,0xFB,0x7E,0xCB,0xB7, +0xFF,0xFF,0xFF,0xC6,0xFF,0xFD,0xEE,0x63, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xFD,0x65, +0x5B,0xDF,0xFF,0xD5,0xFF,0xFF,0xFF,0xF6, 0xE7,0xBF,0xF7,0xA9,0xFF,0xFF,0xED,0xFF, +0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFF,0xFF, 0xAF,0xFF,0xFF,0xFF,0xF8,0x1B,0xFF,0xE3, +0xD0,0xBF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF, 0xFF,0xD7,0xFF,0xFF,0xFF,0x5F,0xFF,0xFF, +0xFF,0xFF,0xAF,0xFF,0xDB,0x76,0xBF,0xFF, 0x7F,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF, +0xFB,0xFE,0xFF,0xFF,0xFF,0xBF,0xF2,0x7F, 0xFF,0x9F,0xFE,0xBD,0xFE,0x7F,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF7,0x3F,0xEC,0x7F,0xF6,0x95,0xBB, +0xEF,0xF8,0xFE,0xFC,0xBF,0x2F,0xDA,0xFC, 0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xEF,0xFF, +0xA9,0xBF,0xCF,0xFB,0xFF,0xFF,0xFF,0xFE, 0xDD,0xB7,0x6D,0xF6,0xD9,0xB6,0x6D,0x9B, +0x76,0xD9,0xBF,0xFB,0xFD,0xA3,0xFF,0xBF, 0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0x7F,0xDF, +0xFD,0xEF,0x7B,0xDE,0xF7,0xFD,0xEF,0x7F, 0xFF,0xFF,0x05,0xFF,0xFA,0xFE,0x7F,0xEF, +0xE3,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF, 0xFF,0x5F,0xFF,0xFF,0xFD,0x7F,0xFB,0xAF, +0xFF,0x63,0xC8,0xFF,0xBF,0xEF,0xFF,0xFF, 0xFA,0x7F,0xFF,0xFF,0xFF,0xFE,0x9F,0xF7, +0xFF,0xFA,0xBF,0xFE,0x9F,0xFB,0x7F,0xFF, 0xFF,0xEF,0xD7,0xFF,0xFF,0xF5,0xFF,0xFF, +0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xBF,0xFF, 0xF9,0xBF,0xFF,0xBE,0x27,0x9F,0xE7,0xF9, +0xFE,0x7F,0x8B,0xE7,0xFE,0x7F,0x9F,0xE2, 0xF9,0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF, +0xFF,0xFF,0xFB,0xFE,0xFF,0xFF,0xFF,0xD7, 0xFF,0xFF,0xFF,0xFF,0xF5,0xFF,0xFF,0xFF, +0xD7,0xFF,0xFA,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFD,0xFF,0xFF,0xFF,0xAF,0xF7,0xFF,0xFF, +0xFF,0xEB,0xFF,0xFF,0xFF,0xAF,0xFF,0xC4, 0xFF,0xF7,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF, +0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xD7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFB,0x7A, +0xDF,0xF7,0xFD,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0x7F,0xFF,0xAF,0xFF,0xFF,0xFF,0xF7, +0xEF,0xE3,0xFF,0xDD,0xD2,0xFF,0xDF,0xFF, 0xFF,0xF2,0xFC,0xBF,0xCB,0xF6,0xFD,0xBF, +0x2F,0xCB,0xFF,0x7F,0xDF,0xDE,0xAF,0xFF, 0xDA,0xEE,0xBF,0xAF,0xE9,0xFA,0xF4,0xBD, +0xAF,0x5A,0xAE,0xBB,0xAB,0x6B,0xDA,0xDE, 0xBF,0xAD,0xD7,0x5E,0xFF,0xFF,0xBF,0xFC, +0xFF,0xDF,0xFD,0xFF,0xFF,0xFF,0xFF,0xDF, 0xF7,0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFA, +0x1F,0xFF,0xFE,0xFB,0xEF,0xBF,0xFD,0xFF, 0xFD,0xBD,0x77,0xFF,0xFF,0xFF,0xFF,0x9D, +0xEF,0xFF,0xFF,0xFF,0xEF,0x7D,0xFF,0xFB, 0xFE,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEE, 0xBF,0xE4,0xFB,0xFF,0xFE,0x3F,0xFE,0xFF, +0xFF,0xFF,0xFF,0xAF,0xEA,0xFE,0xBF,0xAF, 0xEB,0xFA,0xFE,0xFF,0xFF,0xFF,0x55,0xF6, +0xFF,0xFE,0xF7,0xFF,0x7F,0xFF,0xEB,0xF7, 0x5F,0xC5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF, +0x6F,0xFB,0xFF,0x8A,0xFF,0xFF,0xFF,0xFF, 0xEB,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0xBF, +0xEF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0x77,0xDF,0xFB,0xFF,0xFD,0x7F,0xEF,0xFF, +0xFF,0xFF,0xBF,0x7F,0xFF,0xDF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xFF,0xFE,0xEF,0xDF,0xFF, +0xFE,0xFF,0x9F,0xEF,0x7D,0xFF,0xF7,0xFF, 0x7F,0xFF,0xFF,0xDF,0xF7,0xFD,0xFF,0xEF, +0xDF,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0xFB, +0xFD,0xFF,0xBF,0xDF,0xD1,0xFF,0xF8,0x3B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0x7E,0xDB,0xFD,0xFF,0x77,0xDB,0xB7,0x7D, 0xBF,0xFB,0xFF,0xF8,0x7F,0xED,0x7B,0x5E, +0xFF,0xFE,0xFF,0xFF,0x4F,0xD7,0xFD,0x7F, 0xDF,0xD7,0xF5,0xFF,0x7F,0xFF,0xFF,0xFF, +0xF2,0x3F,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFF,0xBF,0xEF,0xFE,0xFF,0x3B,0xEE,0xFF, +0xFC,0xEF,0xFF,0xFF,0xFF,0x85,0xFF,0xFD, 0xFE,0xFF,0xF5,0xFF,0xFF,0xFE,0xFF,0xDF, +0xFB,0xFF,0x5F,0xBF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xA8,0xFF,0xFF,0x9F,0x9E,0xFF, +0xFF,0xFF,0x7F,0xF3,0xFF,0xFF,0xCF,0xFF, 0xF7,0xFD,0xFF,0x7F,0xFF,0xFF,0xFC,0x16, +0xBF,0xCF,0xA3,0xE5,0xEF,0x7F,0xFF,0xF3, 0xE4,0xFF,0xCF,0x93,0xFC,0xFF,0x3F,0xCF, +0xFF,0xFF,0xFF,0xD6,0x0F,0x7D,0xBF,0x6E, 0xFB,0xF4,0xFC,0xAF,0x6D,0xDB,0x77,0xB7, +0x6D,0xDB,0xF6,0xFD,0xBF,0xFF,0xFF,0xFF, 0xBF,0x9B,0xFA,0xDE,0xB7,0xB7,0xED,0xF9, +0x7E,0xB7,0xAC,0xEB,0xD6,0xB3,0xAD,0xEB, 0x7A,0xDF,0xFF,0xFF,0xFF,0xD8,0xBF,0xFF, +0xB7,0xED,0x9F,0x6F,0xDD,0xF7,0x68,0xDB, 0x37,0xB3,0x6C,0xDB,0x36,0xCD,0xB3,0x7F, +0xFF,0x7F,0xF5,0x6F,0xFD,0xEF,0x79,0x3D, 0xF7,0x93,0xE4,0x7A,0x9E,0xAD,0xEA,0x7A, +0x9E,0xF7,0xBD,0xEF,0xFF,0xFF,0xFF,0x76, 0x7F,0xFB,0xC6,0xFF,0xBB,0xEF,0xDA,0xFE, +0xFD,0xBF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xFB,0xFF,0xA5,0xFF,0xFD,0xAB, +0x6F,0x78,0xDE,0x17,0x8F,0x79,0xDF,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xFF,0xFB, +0xFF,0xFB,0xFF,0xEF,0xFB,0xEF,0xFB,0xFE, 0xFF,0xBB,0xDA,0xF3,0xEF,0x3B,0xCE,0xF3, +0xBC,0xEF,0x3F,0xCF,0xDF,0xFF,0xB7,0xFF, 0xFF,0xFF,0xCF,0x73,0xFF,0xBF,0xEF,0xFF, +0xF3,0xFF,0x3F,0xCF,0xF3,0xFC,0xFF,0x3D, 0xCF,0x9F,0xFE,0x07,0xFF,0xAF,0xEB,0xFE, +0xFD,0xBF,0xEF,0xEB,0xFA,0xFF,0xAF,0xEB, 0xFA,0xFE,0xBF,0xAF,0xFB,0xFE,0x3F,0xFB, +0x9B,0xFF,0x7F,0xDF,0xFF,0xF3,0xFE,0xFF, 0xDE,0xF7,0xBF,0x7B,0xDE,0xF7,0xBD,0xEF, +0x7B,0xFE,0xFF,0xFF,0xDF,0x3F,0xFE,0xFF, 0xB7,0xFF,0xEF,0xF7,0xFF,0xBF,0xED,0xFE, +0xDF,0xB7,0xED,0xFB,0x7E,0xDF,0xFF,0xFF, 0xFF,0xFD,0x5F,0xEF,0xEB,0xFA,0xFE,0xF5, +0xBF,0x6F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xF8,0xFF,0xA8,0xFF, +0xFF,0xBF,0xEF,0xFB,0x6A,0xFB,0xB7,0xEF, 0xFB,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF, +0xEF,0xFB,0xFF,0xE0,0xFF,0xFF,0xFD,0x7F, 0x5C,0xD7,0x7D,0xDF,0xF3,0x5C,0xF5,0xCD, +0x73,0x5E,0xD7,0xB5,0xFD,0x7F,0xEF,0xFF, 0xDB,0xFF,0xFF,0xE2,0xF8,0xBE,0x2F,0x8F, +0xE7,0xF8,0xBE,0x6B,0xE2,0xF8,0xBE,0x2F, 0x8B,0xE2,0xF9,0xFE,0x7F,0xE7,0xFF,0xD7, +0xF5,0xFD,0x7F,0xFF,0xF7,0xF5,0xFD,0x7F, 0xD7,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF, +0xFF,0xFF,0x8F,0xFF,0xAF,0xEB,0xFA,0xFF, 0xFF,0xBF,0xEB,0xFA,0xFF,0x2F,0xEB,0xFA, +0xFE,0xBF,0xAF,0xEB,0xFF,0xFF,0xFE,0x5F, 0xFF,0x5F,0xFF,0xFF,0xFD,0xFF,0xFF,0xD7, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFE,0xB7,0xFD, +0xFF,0x7E,0xDF,0xF7,0xAD,0xFF,0x7F,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, +0xF6,0x7F,0xFF,0xFF,0xFF,0xDB,0xF6,0xFC, 0xAF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xEC,0xBF,0xFF, 0xAF,0xEB,0xFA,0xF6,0xAB,0x8F,0xEB,0xFA, +0xF7,0xA5,0xEB,0xFA,0xBE,0xBF,0xAF,0xEB, 0xFA,0xFF,0x6D,0xFF,0xFF,0x7F,0xDF,0x33, +0xDD,0xFF,0x7F,0xFE,0xF7,0xFC,0x7F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xA9, +0xFF,0xFD,0xFF,0xFF,0xFE,0xFF,0xFF,0xDF, 0xFF,0xFF,0xEF,0xEF,0xFD,0xFF,0x7F,0xFF, +0xFF,0xFF,0xFF,0xFE,0xA7,0xFF,0xFF,0xFF, 0x77,0xDF,0xF7,0xFD,0x9F,0x7F,0xFE,0x77, +0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xAF,0xBF,0xAF,0xFF,0xF9,0xBE,0xBF, +0x8F,0xFB,0xFE,0xFE,0xEF,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFF,0xFF,0xFD,0xDF,0x6F, +0xEF,0xFF,0x7F,0xFF,0xBF,0xBF,0xDF,0xFF, 0xFC,0xFF,0xDF,0xF7,0xFD,0xEF,0x7F,0xDF, +0xFF,0xFF,0xFF,0x3F,0xF6,0xFF,0xCF,0xFF, 0xDB,0xFB,0xF7,0xFF,0xEB,0x7A,0xFF,0xFF, +0xFF,0xBF,0xEF,0xFB,0xFF,0xFF,0xFF,0xFE, 0x6D,0xFD,0xFF,0x5F,0xFB,0xFF,0xFF,0xF7, +0xFF,0x5F,0xF5,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xF8,0xFF,0xFB,0xFF, +0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xE7,0xF6, 0xBF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xFF, +0xFF,0xC9,0xFF,0xFF,0xFF,0xBD,0xFF,0xBF, 0xAF,0xEF,0xEF,0x3F,0xD1,0xFC,0x7F,0xFB, +0xC7,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xFF, 0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0x77,0xFF, +0xDF,0xB7,0xFD,0xF7,0xFD,0xF7,0xFF,0xFF, 0xFF,0xFF,0xFF,0x57,0xFF,0xF7,0xA5,0xFD, +0x3F,0xDF,0xBF,0xBF,0xFE,0x7F,0xFF,0xFF, 0xFF,0xDF,0xFA,0xFD,0xFF,0xFF,0xFF,0xFE, +0x87,0xFF,0xE9,0xFF,0xFE,0xEF,0xBF,0xEF, 0xFE,0xFE,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFA,0x9F,0xFF,0x3F, 0xFF,0xFD,0xFD,0x57,0xDF,0xFD,0xF3,0xFF, +0xDF,0xFD,0xFF,0x5F,0xDF,0xF5,0xFD,0xFF, 0xFF,0xF9,0x8F,0xFF,0xFF,0xFF,0xEE,0x7F, +0xFF,0xFF,0xBF,0x5E,0xFE,0xEC,0xFB,0x3F, 0x7F,0x9F,0xEF,0xF9,0xFF,0xFF,0xCD,0x6B, +0xFF,0xFF,0xFF,0xC5,0xF3,0xFC,0xFA,0x38, 0xFF,0xAF,0x3F,0xEE,0x7F,0x9F,0xFF,0xD9, +0xFF,0xFF,0xFD,0x7A,0xF7,0xFF,0xF3,0xFF, 0xAF,0x6F,0xDB,0xF2,0xB9,0xE9,0xFB,0xFF, +0xFF,0xFF,0xFE,0xFF,0xFF,0xEF,0xFF,0xFB, 0xC5,0xBF,0xFF,0xEF,0xFF,0x5E,0xB7,0xAD, +0xCD,0x79,0x7C,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0x93,0xFF,0xEF, +0xEA,0xFE,0xBF,0xEF,0x5B,0xD2,0xCD,0xF5, 0x6D,0x77,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF, +0xFF,0xFF,0x66,0xFF,0xD5,0x65,0x7D,0x5F, 0x75,0x9D,0x65,0x7F,0xD6,0xFB,0x4F,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xC7, 0xFF,0xBF,0xEF,0xFA,0xFE,0xFF,0xBF,0xEB, +0xFF,0xDF,0xFF,0x7E,0xFF,0xFF,0xEF,0xFD, 0x7E,0xD7,0xFF,0x78,0xDF,0xFF,0x5F,0xDF, +0xF5,0xBF,0x7F,0xDF,0xC5,0xFF,0x3F,0xF6, 0x7E,0xFF,0x0F,0xEF,0xF2,0x3E,0xBF,0xFF, +0xFB,0x3F,0xFF,0xFB,0x7F,0xFF,0xB3,0xFE, 0xFB,0xF6,0xFD,0xFF,0xDA,0xF7,0xFD,0xFF, +0x7F,0xDF,0xF7,0xBF,0xFF,0xFA,0x7F,0xFF, 0xFF,0xFF,0xFF,0x9F,0xFF,0xF3,0xDC,0xF9, +0xBF,0xCE,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7, 0xFF,0xFF,0xE2,0x7F,0xFE,0xFF,0xBF,0xEF, +0xEB,0xFA,0xFF,0x9F,0x67,0x1E,0xFF,0x8F, 0xE7,0xF8,0xFE,0x7F,0x8F,0xEF,0xFF,0xBD, +0xBF,0xFF,0xFB,0xFF,0xFF,0xDF,0xF7,0xFF, 0xFC,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFD,0xB3,0xFF,0xFF,0xEF, 0xFF,0xFF,0xBF,0xED,0xFF,0xFB,0xEE,0xFE, +0xFF,0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFF,0xB5,0xFF,0xB7,0xFD,0xFD,0x6E,0xFF, +0xFF,0xFE,0xFD,0x2F,0xD8,0xFE,0xBF,0x8F, 0xEB,0xF9,0xFE,0x3F,0xFF,0xFA,0xCF,0xFF, +0xE7,0xD9,0xFA,0xBF,0xDF,0x77,0xFC,0xFB, 0x3F,0xAB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFE, +0xFF,0xFF,0xEE,0x1F,0xFF,0xDF,0xF7,0xFF, 0xFF,0xFF,0x5F,0x97,0x35,0xBF,0x5E,0xFE, +0xBF,0xEF,0xFF,0xF7,0xFD,0xFF,0xFF,0xFA, 0xBF,0xFF,0xBE,0x6F,0x9F,0xE7,0xF8,0xBE, +0x2F,0x8B,0x66,0x94,0x7D,0x9D,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF,0xFF, +0xFF,0xF7,0xF5,0xFD,0x7F,0x5F,0xFB,0xFD, 0x9E,0xFF,0xFB,0xFE,0xFF,0xFF,0xEF,0xFF, +0xFF,0xA0,0xFF,0xFF,0xFF,0xBF,0xEF,0xEB, 0xFA,0xFE,0xBF,0xB7,0xF7,0xF7,0xFF,0xFF, +0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xFD,0xFF,0xFF,0xFF,0xD7,0xFF,0xFF,0xFF, +0x7F,0xF5,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xFF,0xAB,0xFE,0xFB,0xFE,0xFF, +0xF7,0xAF,0xFF,0xFF,0xDE,0xF7,0xEB,0x5F, 0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF,0xFF, +0xB3,0xFF,0xC9,0xFE,0xFF,0xFF,0xFF,0xFF, 0xD6,0xFF,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFC,0x8F,0xFF,0xBA, 0xBE,0xBF,0xAF,0xEB,0x78,0xFE,0xB7,0xAD, +0x3A,0xFE,0xB7,0xAF,0xEB,0x7A,0xFE,0xBF, 0xAF,0xFF,0x9F,0xFF,0xFF,0xDF,0xFC,0xFF, +0xFF,0xFE,0xC3,0xFE,0xFF,0xFF,0x33,0xFC, 0xFF,0xBF,0xDF,0xF3,0xFF,0xFF,0xBB,0x9F, +0xFF,0xFF,0xFF,0xEB,0xDF,0xFF,0xFF,0xAF, 0xF7,0x6F,0xF9,0xBF,0xEF,0xFD,0xFF,0xFF, +0xFF,0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xFD,0xFB,0xF7,0xFF, +0xDF,0xF7,0xFF,0xFE,0xEF,0x5F,0xBD,0xFF, 0xFA,0xFF,0xF8,0xFF,0xBF,0xAF,0xFB,0xFE, +0xFE,0x3F,0xEF,0xE8,0xFF,0xDF,0xF3,0xFD, 0xFF,0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xFB, +0xFD,0xFF,0xAF,0xFF,0xFF,0xFE,0xFE,0xBF, 0xDB,0xFF,0xFF,0xFF,0xBF,0xFF,0xDF,0xFF, +0xFD,0xFF,0xCB,0xFF,0xFF,0xFF,0xFF,0xFF, 0xBF,0x6F,0xFF,0x7F,0xB7,0xB3,0xFF,0xFF, +0xDF,0xFF,0xFB,0xEF,0xFF,0xFF,0xFF,0x07, 0xFF,0xFB,0xFF,0xFF,0xFF,0xED,0xFF,0xF5, +0x7C,0xFF,0x7F,0xFE,0xFF,0xFF,0xEF,0xCF, 0xFF,0xFB,0xFF,0xFF,0x2F,0xFF,0xFF,0xFF, +0xFF,0xF3,0xFF,0xFB,0xFF,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, +0xFD,0x1B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFE,0x7C,0xFF,0xFF,0xFF,0xFF, +0xEF,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0x7F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xDB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xFE, +0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xEF,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xEF,0xFA,0xB5,0xFF,0xFF,0xFF, 0xF7,0xF7,0xFF,0xFF,0xFF,0xFF,0xDF,0xFB, +0xFC,0xFF,0xFF,0xFE,0xFF,0x7F,0xDF,0xBF, 0xFF,0xCB,0xBF,0xF9,0xFE,0x7F,0x9F,0xE7, +0xF9,0xFE,0x7F,0x97,0xE1,0xFE,0x79,0x9F, 0xE7,0xFD,0xFE,0x7F,0xDF,0xFE,0x37,0xFF, +0xFB,0xDE,0xDE,0xBD,0xEF,0xF3,0xFE,0xFB, 0xAF,0xEB,0xFE,0xFF,0xFF,0xCF,0xFF,0xFE, +0xFF,0xBF,0xFF,0x8F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xE7,0xF9,0x5E,0x7F,0xEF,0xFB, +0xDA,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD, 0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDF, +0xFF,0xFF,0x7F,0xFF,0xFF,0xF7,0xFB,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFC,0x3F,0xFF,0xBF, +0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0x7B,0x7F, 0xBF,0xEF,0xFB,0xFE,0xFF,0xB5,0xEF,0xFB, +0xBF,0xFA,0x7F,0xFC,0xFF,0x3F,0xCF,0xF3, 0xFC,0xFF,0x3F,0xCF,0xBC,0xFF,0x3F,0xEF, +0xF3,0xFC,0xFE,0x3F,0xCF,0xFF,0xEE,0xEF, 0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0x6A,0xD7, +0xB7,0xFB,0xF8,0xFF,0xB7,0xEF,0xBA,0xFE, 0xFF,0xBF,0x7F,0xE9,0xFF,0xF9,0x7E,0x5F, +0x97,0xE5,0xF9,0xFE,0x7F,0xBF,0xF9,0x7E, 0x5F,0x9F,0xE5,0xFB,0xFE,0x5F,0xB7,0xFF, +0xA3,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0x5E,0xF7,0x7D,0xFF,0x77,0xDF, +0xF7,0xFD,0xFF,0x7F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xDF,0xFB,0x7F, +0xFF,0xFF,0xEF,0xFF,0xFE,0xFB,0xFF,0xFF, 0xBF,0xFE,0x8F,0xFF,0xDF,0xF7,0xFD,0xFD, +0x7F,0xDF,0xF7,0xFD,0x3E,0xDF,0xF5,0xBD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xF7,0xFF,0x9F, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xBE,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFD,0x3F,0xFF,0xDF,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xCF, +0x77,0xFC,0xFF,0x5F,0xDF,0xF7,0xFD,0xFF, 0xF4,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xFF,0xFF,0xEE,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xED,0xFB,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xE9,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFB,0xFF,0xFF,0xFF,0xD3,0xFF,0xFF, +0xBF,0x3F,0xFB,0xFF,0xFF,0xFF,0xFB,0xF3, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0x17,0xFF,0xFF,0xFF, +0xDF,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xDF,0xFF,0xFD,0xFF,0xFF,0xDF,0xF7, +0xFF,0x4F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD, +0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x9F,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, +0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFF,0xFF,0x7A,0x3F,0xFF,0xFF,0xFF,0xFF, +0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF2, +0x7F,0xFF,0xFB,0xFE,0xFF,0xBF,0xEF,0xF8, 0xFE,0xFF,0xBF,0xFB,0xFE,0xFF,0x8F,0xEC, +0xFB,0xFE,0xFF,0xBF,0xF8,0xF7,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFD,0xBF,0xCF,0xEC, +0xFF,0x3F,0xEF,0xDB,0xF8,0xFF,0xBF,0xCF, 0xFF,0xF9,0xFF,0xFF,0xBF,0xFF,0xFB,0xFF, +0xFF,0xFF,0xEF,0xFB,0xDF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xBB,0xFF, +0xEF,0xFB,0xFE,0xEF,0xBF,0xEE,0xEB,0xFB, 0xFE,0xFF,0xEF,0xFE,0xEE,0xBF,0xFE,0xEB, +0xFF,0xEF,0xFF,0x17,0xFF,0x7E,0xEB,0xBB, 0xFE,0xBF,0xBE,0xFB,0xEF,0x5B,0xF7,0xBD, +0xFB,0xCF,0xBF,0xBF,0xBB,0xFB,0x7E,0xCC, 0xEF,0xFF + +}; diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c new file mode 100644 index 000000000000..b9ba95f5e026 --- /dev/null +++ b/drivers/media/video/dabusb.c @@ -0,0 +1,874 @@ +/*****************************************************************************/ + +/* + * dabusb.c -- dab usb driver. + * + * Copyright (C) 1999 Deti Fliegl (deti@fliegl.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * + * $Id: dabusb.c,v 1.54 2000/07/24 21:39:39 deti Exp $ + * + */ + +/*****************************************************************************/ + +#include <linux/module.h> +#include <linux/socket.h> +#include <linux/list.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <asm/atomic.h> +#include <linux/delay.h> +#include <linux/usb.h> +#include <linux/smp_lock.h> +#include <linux/mutex.h> + +#include "dabusb.h" +#include "dabfirmware.h" + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.54" +#define DRIVER_AUTHOR "Deti Fliegl, deti@fliegl.de" +#define DRIVER_DESC "DAB-USB Interface Driver for Linux (c)1999" + +/* --------------------------------------------------------------------- */ + +#ifdef CONFIG_USB_DYNAMIC_MINORS +#define NRDABUSB 256 +#else +#define NRDABUSB 4 +#endif + +/*-------------------------------------------------------------------*/ + +static dabusb_t dabusb[NRDABUSB]; +static int buffers = 256; +static struct usb_driver dabusb_driver; + +/*-------------------------------------------------------------------*/ + +static int dabusb_add_buf_tail (pdabusb_t s, struct list_head *dst, struct list_head *src) +{ + unsigned long flags; + struct list_head *tmp; + int ret = 0; + + spin_lock_irqsave (&s->lock, flags); + + if (list_empty (src)) { + // no elements in source buffer + ret = -1; + goto err; + } + tmp = src->next; + list_move_tail (tmp, dst); + + err: spin_unlock_irqrestore (&s->lock, flags); + return ret; +} +/*-------------------------------------------------------------------*/ +#ifdef DEBUG +static void dump_urb (struct urb *urb) +{ + dbg("urb :%p", urb); + dbg("dev :%p", urb->dev); + dbg("pipe :%08X", urb->pipe); + dbg("status :%d", urb->status); + dbg("transfer_flags :%08X", urb->transfer_flags); + dbg("transfer_buffer :%p", urb->transfer_buffer); + dbg("transfer_buffer_length:%d", urb->transfer_buffer_length); + dbg("actual_length :%d", urb->actual_length); + dbg("setup_packet :%p", urb->setup_packet); + dbg("start_frame :%d", urb->start_frame); + dbg("number_of_packets :%d", urb->number_of_packets); + dbg("interval :%d", urb->interval); + dbg("error_count :%d", urb->error_count); + dbg("context :%p", urb->context); + dbg("complete :%p", urb->complete); +} +#endif +/*-------------------------------------------------------------------*/ +static int dabusb_cancel_queue (pdabusb_t s, struct list_head *q) +{ + unsigned long flags; + pbuff_t b; + + dbg("dabusb_cancel_queue"); + + spin_lock_irqsave (&s->lock, flags); + + list_for_each_entry(b, q, buff_list) { +#ifdef DEBUG + dump_urb(b->purb); +#endif + usb_unlink_urb (b->purb); + } + spin_unlock_irqrestore (&s->lock, flags); + return 0; +} +/*-------------------------------------------------------------------*/ +static int dabusb_free_queue (struct list_head *q) +{ + struct list_head *tmp; + struct list_head *p; + pbuff_t b; + + dbg("dabusb_free_queue"); + for (p = q->next; p != q;) { + b = list_entry (p, buff_t, buff_list); + +#ifdef DEBUG + dump_urb(b->purb); +#endif + kfree(b->purb->transfer_buffer); + usb_free_urb(b->purb); + tmp = p->next; + list_del (p); + kfree (b); + p = tmp; + } + + return 0; +} +/*-------------------------------------------------------------------*/ +static int dabusb_free_buffers (pdabusb_t s) +{ + unsigned long flags; + dbg("dabusb_free_buffers"); + + spin_lock_irqsave(&s->lock, flags); + + dabusb_free_queue (&s->free_buff_list); + dabusb_free_queue (&s->rec_buff_list); + + spin_unlock_irqrestore(&s->lock, flags); + + s->got_mem = 0; + return 0; +} +/*-------------------------------------------------------------------*/ +static void dabusb_iso_complete (struct urb *purb, struct pt_regs *regs) +{ + pbuff_t b = purb->context; + pdabusb_t s = b->s; + int i; + int len; + int dst = 0; + void *buf = purb->transfer_buffer; + + dbg("dabusb_iso_complete"); + + // process if URB was not killed + if (purb->status != -ENOENT) { + unsigned int pipe = usb_rcvisocpipe (purb->dev, _DABUSB_ISOPIPE); + int pipesize = usb_maxpacket (purb->dev, pipe, usb_pipeout (pipe)); + for (i = 0; i < purb->number_of_packets; i++) + if (!purb->iso_frame_desc[i].status) { + len = purb->iso_frame_desc[i].actual_length; + if (len <= pipesize) { + memcpy (buf + dst, buf + purb->iso_frame_desc[i].offset, len); + dst += len; + } + else + err("dabusb_iso_complete: invalid len %d", len); + } + else + warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status); + if (dst != purb->actual_length) + err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length); + } + + if (atomic_dec_and_test (&s->pending_io) && !s->remove_pending && s->state != _stopped) { + s->overruns++; + err("overrun (%d)", s->overruns); + } + wake_up (&s->wait); +} +/*-------------------------------------------------------------------*/ +static int dabusb_alloc_buffers (pdabusb_t s) +{ + int buffers = 0; + pbuff_t b; + unsigned int pipe = usb_rcvisocpipe (s->usbdev, _DABUSB_ISOPIPE); + int pipesize = usb_maxpacket (s->usbdev, pipe, usb_pipeout (pipe)); + int packets = _ISOPIPESIZE / pipesize; + int transfer_buffer_length = packets * pipesize; + int i; + + dbg("dabusb_alloc_buffers pipesize:%d packets:%d transfer_buffer_len:%d", + pipesize, packets, transfer_buffer_length); + + while (buffers < (s->total_buffer_size << 10)) { + b = (pbuff_t) kzalloc (sizeof (buff_t), GFP_KERNEL); + if (!b) { + err("kzalloc(sizeof(buff_t))==NULL"); + goto err; + } + b->s = s; + b->purb = usb_alloc_urb(packets, GFP_KERNEL); + if (!b->purb) { + err("usb_alloc_urb == NULL"); + kfree (b); + goto err; + } + + b->purb->transfer_buffer = kmalloc (transfer_buffer_length, GFP_KERNEL); + if (!b->purb->transfer_buffer) { + kfree (b->purb); + kfree (b); + err("kmalloc(%d)==NULL", transfer_buffer_length); + goto err; + } + + b->purb->transfer_buffer_length = transfer_buffer_length; + b->purb->number_of_packets = packets; + b->purb->complete = dabusb_iso_complete; + b->purb->context = b; + b->purb->dev = s->usbdev; + b->purb->pipe = pipe; + b->purb->transfer_flags = URB_ISO_ASAP; + + for (i = 0; i < packets; i++) { + b->purb->iso_frame_desc[i].offset = i * pipesize; + b->purb->iso_frame_desc[i].length = pipesize; + } + + buffers += transfer_buffer_length; + list_add_tail (&b->buff_list, &s->free_buff_list); + } + s->got_mem = buffers; + + return 0; + + err: + dabusb_free_buffers (s); + return -ENOMEM; +} +/*-------------------------------------------------------------------*/ +static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb) +{ + int ret; + unsigned int pipe; + int actual_length; + + dbg("dabusb_bulk"); + + if (!pb->pipe) + pipe = usb_rcvbulkpipe (s->usbdev, 2); + else + pipe = usb_sndbulkpipe (s->usbdev, 2); + + ret=usb_bulk_msg(s->usbdev, pipe, pb->data, pb->size, &actual_length, 100); + if(ret<0) { + err("dabusb: usb_bulk_msg failed(%d)",ret); + + if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) { + err("set_interface failed"); + return -EINVAL; + } + + } + + if( ret == -EPIPE ) { + warn("CLEAR_FEATURE request to remove STALL condition."); + if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe))) + err("request failed"); + } + + pb->size = actual_length; + return ret; +} +/* --------------------------------------------------------------------- */ +static int dabusb_writemem (pdabusb_t s, int pos, unsigned char *data, int len) +{ + int ret; + unsigned char *transfer_buffer = kmalloc (len, GFP_KERNEL); + + if (!transfer_buffer) { + err("dabusb_writemem: kmalloc(%d) failed.", len); + return -ENOMEM; + } + + memcpy (transfer_buffer, data, len); + + ret=usb_control_msg(s->usbdev, usb_sndctrlpipe( s->usbdev, 0 ), 0xa0, 0x40, pos, 0, transfer_buffer, len, 300); + + kfree (transfer_buffer); + return ret; +} +/* --------------------------------------------------------------------- */ +static int dabusb_8051_reset (pdabusb_t s, unsigned char reset_bit) +{ + dbg("dabusb_8051_reset: %d",reset_bit); + return dabusb_writemem (s, CPUCS_REG, &reset_bit, 1); +} +/* --------------------------------------------------------------------- */ +static int dabusb_loadmem (pdabusb_t s, const char *fname) +{ + int ret; + PINTEL_HEX_RECORD ptr = firmware; + + dbg("Enter dabusb_loadmem (internal)"); + + ret = dabusb_8051_reset (s, 1); + while (ptr->Type == 0) { + + dbg("dabusb_writemem: %04X %p %d)", ptr->Address, ptr->Data, ptr->Length); + + ret = dabusb_writemem (s, ptr->Address, ptr->Data, ptr->Length); + if (ret < 0) { + err("dabusb_writemem failed (%d %04X %p %d)", ret, ptr->Address, ptr->Data, ptr->Length); + break; + } + ptr++; + } + ret = dabusb_8051_reset (s, 0); + + dbg("dabusb_loadmem: exit"); + + return ret; +} +/* --------------------------------------------------------------------- */ +static int dabusb_fpga_clear (pdabusb_t s, pbulk_transfer_t b) +{ + b->size = 4; + b->data[0] = 0x2a; + b->data[1] = 0; + b->data[2] = 0; + b->data[3] = 0; + + dbg("dabusb_fpga_clear"); + + return dabusb_bulk (s, b); +} +/* --------------------------------------------------------------------- */ +static int dabusb_fpga_init (pdabusb_t s, pbulk_transfer_t b) +{ + b->size = 4; + b->data[0] = 0x2c; + b->data[1] = 0; + b->data[2] = 0; + b->data[3] = 0; + + dbg("dabusb_fpga_init"); + + return dabusb_bulk (s, b); +} +/* --------------------------------------------------------------------- */ +static int dabusb_fpga_download (pdabusb_t s, const char *fname) +{ + pbulk_transfer_t b = kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL); + unsigned int blen, n; + int ret; + unsigned char *buf = bitstream; + + dbg("Enter dabusb_fpga_download (internal)"); + + if (!b) { + err("kmalloc(sizeof(bulk_transfer_t))==NULL"); + return -ENOMEM; + } + + b->pipe = 1; + ret = dabusb_fpga_clear (s, b); + mdelay (10); + blen = buf[73] + (buf[72] << 8); + + dbg("Bitstream len: %i", blen); + + b->data[0] = 0x2b; + b->data[1] = 0; + b->data[2] = 0; + b->data[3] = 60; + + for (n = 0; n <= blen + 60; n += 60) { + // some cclks for startup + b->size = 64; + memcpy (b->data + 4, buf + 74 + n, 60); + ret = dabusb_bulk (s, b); + if (ret < 0) { + err("dabusb_bulk failed."); + break; + } + mdelay (1); + } + + ret = dabusb_fpga_init (s, b); + kfree (b); + + dbg("exit dabusb_fpga_download"); + + return ret; +} + +static int dabusb_stop (pdabusb_t s) +{ + dbg("dabusb_stop"); + + s->state = _stopped; + dabusb_cancel_queue (s, &s->rec_buff_list); + + dbg("pending_io: %d", s->pending_io.counter); + + s->pending_io.counter = 0; + return 0; +} + +static int dabusb_startrek (pdabusb_t s) +{ + if (!s->got_mem && s->state != _started) { + + dbg("dabusb_startrek"); + + if (dabusb_alloc_buffers (s) < 0) + return -ENOMEM; + dabusb_stop (s); + s->state = _started; + s->readptr = 0; + } + + if (!list_empty (&s->free_buff_list)) { + pbuff_t end; + int ret; + + while (!dabusb_add_buf_tail (s, &s->rec_buff_list, &s->free_buff_list)) { + + dbg("submitting: end:%p s->rec_buff_list:%p", s->rec_buff_list.prev, &s->rec_buff_list); + + end = list_entry (s->rec_buff_list.prev, buff_t, buff_list); + + ret = usb_submit_urb (end->purb, GFP_KERNEL); + if (ret) { + err("usb_submit_urb returned:%d", ret); + if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list)) + err("startrek: dabusb_add_buf_tail failed"); + break; + } + else + atomic_inc (&s->pending_io); + } + dbg("pending_io: %d",s->pending_io.counter); + } + + return 0; +} + +static ssize_t dabusb_read (struct file *file, char __user *buf, size_t count, loff_t * ppos) +{ + pdabusb_t s = (pdabusb_t) file->private_data; + unsigned long flags; + unsigned ret = 0; + int rem; + int cnt; + pbuff_t b; + struct urb *purb = NULL; + + dbg("dabusb_read"); + + if (*ppos) + return -ESPIPE; + + if (s->remove_pending) + return -EIO; + + + if (!s->usbdev) + return -EIO; + + while (count > 0) { + dabusb_startrek (s); + + spin_lock_irqsave (&s->lock, flags); + + if (list_empty (&s->rec_buff_list)) { + + spin_unlock_irqrestore(&s->lock, flags); + + err("error: rec_buf_list is empty"); + goto err; + } + + b = list_entry (s->rec_buff_list.next, buff_t, buff_list); + purb = b->purb; + + spin_unlock_irqrestore(&s->lock, flags); + + if (purb->status == -EINPROGRESS) { + if (file->f_flags & O_NONBLOCK) // return nonblocking + { + if (!ret) + ret = -EAGAIN; + goto err; + } + + interruptible_sleep_on (&s->wait); + + if (signal_pending (current)) { + if (!ret) + ret = -ERESTARTSYS; + goto err; + } + + spin_lock_irqsave (&s->lock, flags); + + if (list_empty (&s->rec_buff_list)) { + spin_unlock_irqrestore(&s->lock, flags); + err("error: still no buffer available."); + goto err; + } + spin_unlock_irqrestore(&s->lock, flags); + s->readptr = 0; + } + if (s->remove_pending) { + ret = -EIO; + goto err; + } + + rem = purb->actual_length - s->readptr; // set remaining bytes to copy + + if (count >= rem) + cnt = rem; + else + cnt = count; + + dbg("copy_to_user:%p %p %d",buf, purb->transfer_buffer + s->readptr, cnt); + + if (copy_to_user (buf, purb->transfer_buffer + s->readptr, cnt)) { + err("read: copy_to_user failed"); + if (!ret) + ret = -EFAULT; + goto err; + } + + s->readptr += cnt; + count -= cnt; + buf += cnt; + ret += cnt; + + if (s->readptr == purb->actual_length) { + // finished, take next buffer + if (dabusb_add_buf_tail (s, &s->free_buff_list, &s->rec_buff_list)) + err("read: dabusb_add_buf_tail failed"); + s->readptr = 0; + } + } + err: //mutex_unlock(&s->mutex); + return ret; +} + +static int dabusb_open (struct inode *inode, struct file *file) +{ + int devnum = iminor(inode); + pdabusb_t s; + + if (devnum < DABUSB_MINOR || devnum >= (DABUSB_MINOR + NRDABUSB)) + return -EIO; + + s = &dabusb[devnum - DABUSB_MINOR]; + + dbg("dabusb_open"); + mutex_lock(&s->mutex); + + while (!s->usbdev || s->opened) { + mutex_unlock(&s->mutex); + + if (file->f_flags & O_NONBLOCK) { + return -EBUSY; + } + msleep_interruptible(500); + + if (signal_pending (current)) { + return -EAGAIN; + } + mutex_lock(&s->mutex); + } + if (usb_set_interface (s->usbdev, _DABUSB_IF, 1) < 0) { + mutex_unlock(&s->mutex); + err("set_interface failed"); + return -EINVAL; + } + s->opened = 1; + mutex_unlock(&s->mutex); + + file->f_pos = 0; + file->private_data = s; + + return nonseekable_open(inode, file); +} + +static int dabusb_release (struct inode *inode, struct file *file) +{ + pdabusb_t s = (pdabusb_t) file->private_data; + + dbg("dabusb_release"); + + mutex_lock(&s->mutex); + dabusb_stop (s); + dabusb_free_buffers (s); + mutex_unlock(&s->mutex); + + if (!s->remove_pending) { + if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) + err("set_interface failed"); + } + else + wake_up (&s->remove_ok); + + s->opened = 0; + return 0; +} + +static int dabusb_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + pdabusb_t s = (pdabusb_t) file->private_data; + pbulk_transfer_t pbulk; + int ret = 0; + int version = DABUSB_VERSION; + + dbg("dabusb_ioctl"); + + if (s->remove_pending) + return -EIO; + + mutex_lock(&s->mutex); + + if (!s->usbdev) { + mutex_unlock(&s->mutex); + return -EIO; + } + + switch (cmd) { + + case IOCTL_DAB_BULK: + pbulk = (pbulk_transfer_t) kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL); + + if (!pbulk) { + ret = -ENOMEM; + break; + } + + if (copy_from_user (pbulk, (void __user *) arg, sizeof (bulk_transfer_t))) { + ret = -EFAULT; + kfree (pbulk); + break; + } + + ret=dabusb_bulk (s, pbulk); + if(ret==0) + if (copy_to_user((void __user *)arg, pbulk, + sizeof(bulk_transfer_t))) + ret = -EFAULT; + kfree (pbulk); + break; + + case IOCTL_DAB_OVERRUNS: + ret = put_user (s->overruns, (unsigned int __user *) arg); + break; + + case IOCTL_DAB_VERSION: + ret = put_user (version, (unsigned int __user *) arg); + break; + + default: + ret = -ENOIOCTLCMD; + break; + } + mutex_unlock(&s->mutex); + return ret; +} + +static struct file_operations dabusb_fops = +{ + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = dabusb_read, + .ioctl = dabusb_ioctl, + .open = dabusb_open, + .release = dabusb_release, +}; + +static struct usb_class_driver dabusb_class = { + .name = "dabusb%d", + .fops = &dabusb_fops, + .minor_base = DABUSB_MINOR, +}; + + +/* --------------------------------------------------------------------- */ +static int dabusb_probe (struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = interface_to_usbdev(intf); + int retval; + pdabusb_t s; + + dbg("dabusb: probe: vendor id 0x%x, device id 0x%x ifnum:%d", + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct), + intf->altsetting->desc.bInterfaceNumber); + + /* We don't handle multiple configurations */ + if (usbdev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + if (intf->altsetting->desc.bInterfaceNumber != _DABUSB_IF && + le16_to_cpu(usbdev->descriptor.idProduct) == 0x9999) + return -ENODEV; + + + + s = &dabusb[intf->minor]; + + mutex_lock(&s->mutex); + s->remove_pending = 0; + s->usbdev = usbdev; + s->devnum = intf->minor; + + if (usb_reset_configuration (usbdev) < 0) { + err("reset_configuration failed"); + goto reject; + } + if (le16_to_cpu(usbdev->descriptor.idProduct) == 0x2131) { + dabusb_loadmem (s, NULL); + goto reject; + } + else { + dabusb_fpga_download (s, NULL); + + if (usb_set_interface (s->usbdev, _DABUSB_IF, 0) < 0) { + err("set_interface failed"); + goto reject; + } + } + dbg("bound to interface: %d", intf->altsetting->desc.bInterfaceNumber); + usb_set_intfdata (intf, s); + mutex_unlock(&s->mutex); + + retval = usb_register_dev(intf, &dabusb_class); + if (retval) { + usb_set_intfdata (intf, NULL); + return -ENOMEM; + } + + return 0; + + reject: + mutex_unlock(&s->mutex); + s->usbdev = NULL; + return -ENODEV; +} + +static void dabusb_disconnect (struct usb_interface *intf) +{ + wait_queue_t __wait; + pdabusb_t s = usb_get_intfdata (intf); + + dbg("dabusb_disconnect"); + + init_waitqueue_entry(&__wait, current); + + usb_set_intfdata (intf, NULL); + if (s) { + usb_deregister_dev (intf, &dabusb_class); + s->remove_pending = 1; + wake_up (&s->wait); + add_wait_queue(&s->remove_ok, &__wait); + set_current_state(TASK_UNINTERRUPTIBLE); + if (s->state == _started) + schedule(); + current->state = TASK_RUNNING; + remove_wait_queue(&s->remove_ok, &__wait); + + s->usbdev = NULL; + s->overruns = 0; + } +} + +static struct usb_device_id dabusb_ids [] = { + // { USB_DEVICE(0x0547, 0x2131) }, /* An2131 chip, no boot ROM */ + { USB_DEVICE(0x0547, 0x9999) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, dabusb_ids); + +static struct usb_driver dabusb_driver = { + .name = "dabusb", + .probe = dabusb_probe, + .disconnect = dabusb_disconnect, + .id_table = dabusb_ids, +}; + +/* --------------------------------------------------------------------- */ + +static int __init dabusb_init (void) +{ + int retval; + unsigned u; + + /* initialize struct */ + for (u = 0; u < NRDABUSB; u++) { + pdabusb_t s = &dabusb[u]; + memset (s, 0, sizeof (dabusb_t)); + mutex_init (&s->mutex); + s->usbdev = NULL; + s->total_buffer_size = buffers; + init_waitqueue_head (&s->wait); + init_waitqueue_head (&s->remove_ok); + spin_lock_init (&s->lock); + INIT_LIST_HEAD (&s->free_buff_list); + INIT_LIST_HEAD (&s->rec_buff_list); + } + + /* register misc device */ + retval = usb_register(&dabusb_driver); + if (retval) + goto out; + + dbg("dabusb_init: driver registered"); + + info(DRIVER_VERSION ":" DRIVER_DESC); + +out: + return retval; +} + +static void __exit dabusb_cleanup (void) +{ + dbg("dabusb_cleanup"); + + usb_deregister (&dabusb_driver); +} + +/* --------------------------------------------------------------------- */ + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); + +module_param(buffers, int, 0); +MODULE_PARM_DESC (buffers, "Number of buffers (default=256)"); + +module_init (dabusb_init); +module_exit (dabusb_cleanup); + +/* --------------------------------------------------------------------- */ diff --git a/drivers/media/video/dabusb.h b/drivers/media/video/dabusb.h new file mode 100644 index 000000000000..00eb34c863eb --- /dev/null +++ b/drivers/media/video/dabusb.h @@ -0,0 +1,85 @@ +#define _BULK_DATA_LEN 64 +typedef struct +{ + unsigned char data[_BULK_DATA_LEN]; + unsigned int size; + unsigned int pipe; +}bulk_transfer_t,*pbulk_transfer_t; + +#define DABUSB_MINOR 240 /* some unassigned USB minor */ +#define DABUSB_VERSION 0x1000 +#define IOCTL_DAB_BULK _IOWR('d', 0x30, bulk_transfer_t) +#define IOCTL_DAB_OVERRUNS _IOR('d', 0x15, int) +#define IOCTL_DAB_VERSION _IOR('d', 0x3f, int) + +#ifdef __KERNEL__ + +typedef enum { _stopped=0, _started } driver_state_t; + +typedef struct +{ + struct mutex mutex; + struct usb_device *usbdev; + wait_queue_head_t wait; + wait_queue_head_t remove_ok; + spinlock_t lock; + atomic_t pending_io; + driver_state_t state; + int remove_pending; + int got_mem; + int total_buffer_size; + unsigned int overruns; + int readptr; + int opened; + int devnum; + struct list_head free_buff_list; + struct list_head rec_buff_list; +} dabusb_t,*pdabusb_t; + +typedef struct +{ + pdabusb_t s; + struct urb *purb; + struct list_head buff_list; +} buff_t,*pbuff_t; + +typedef struct +{ + wait_queue_head_t wait; +} bulk_completion_context_t, *pbulk_completion_context_t; + + +#define _DABUSB_IF 2 +#define _DABUSB_ISOPIPE 0x09 +#define _ISOPIPESIZE 16384 + +#define _BULK_DATA_LEN 64 +// Vendor specific request code for Anchor Upload/Download +// This one is implemented in the core +#define ANCHOR_LOAD_INTERNAL 0xA0 + +// EZ-USB Control and Status Register. Bit 0 controls 8051 reset +#define CPUCS_REG 0x7F92 +#define _TOTAL_BUFFERS 384 + +#define MAX_INTEL_HEX_RECORD_LENGTH 16 + +#ifndef _BYTE_DEFINED +#define _BYTE_DEFINED +typedef unsigned char BYTE; +#endif // !_BYTE_DEFINED + +#ifndef _WORD_DEFINED +#define _WORD_DEFINED +typedef unsigned short WORD; +#endif // !_WORD_DEFINED + +typedef struct _INTEL_HEX_RECORD +{ + BYTE Length; + WORD Address; + BYTE Type; + BYTE Data[MAX_INTEL_HEX_RECORD_LENGTH]; +} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD; + +#endif diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c index 2831bdd12057..0fcc935828f8 100644 --- a/drivers/media/video/dpc7146.c +++ b/drivers/media/video/dpc7146.c @@ -1,6 +1,6 @@ /* dpc7146.c - v4l2 driver for the dpc7146 demonstration board - + Copyright (C) 2000-2003 Michael Hunold <michael@mihu.de> This program is free software; you can redistribute it and/or modify @@ -52,7 +52,7 @@ #define SAA711X_DECODED_BYTES_OF_TS_2 0x1C #define SAA711X_STATUS_BYTE 0x1F -#define DPC_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) +#define DPC_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) static int debug = 0; module_param(debug, int, 0); @@ -81,16 +81,16 @@ struct dpc struct video_device *video_dev; struct video_device *vbi_dev; - struct i2c_adapter i2c_adapter; + struct i2c_adapter i2c_adapter; struct i2c_client *saa7111a; - + int cur_input; /* current input */ }; /* fixme: add vbi stuff here */ static int dpc_probe(struct saa7146_dev* dev) { - struct dpc* dpc = NULL; + struct dpc* dpc = NULL; struct i2c_client *client; struct list_head *item; @@ -118,20 +118,20 @@ static int dpc_probe(struct saa7146_dev* dev) /* loop through all i2c-devices on the bus and look who is there */ list_for_each(item,&dpc->i2c_adapter.clients) { client = list_entry(item, struct i2c_client, list); - if( I2C_SAA7111A == client->addr ) + if( I2C_SAA7111A == client->addr ) dpc->saa7111a = client; } /* check if all devices are present */ if( 0 == dpc->saa7111a ) { - DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n")); + DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n")); i2c_del_adapter(&dpc->i2c_adapter); kfree(dpc); return -ENODEV; } - - /* all devices are present, probe was successful */ - DEB_D(("dpc_v4l2.o: dpc_probe succeeded for this device.\n")); + + /* all devices are present, probe was successful */ + DEB_D(("dpc_v4l2.o: dpc_probe succeeded for this device.\n")); /* we store the pointer in our private data field */ dev->ext_priv = dpc; @@ -182,7 +182,7 @@ static struct saa7146_ext_vv vv_data; static int dpc_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) { struct dpc* dpc = (struct dpc*)dev->ext_priv; - + DEB_D(("dpc_v4l2.o: dpc_attach called.\n")); /* checking for i2c-devices can be omitted here, because we @@ -193,7 +193,7 @@ static int dpc_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data ERR(("cannot register capture v4l2 device. skipping.\n")); return -1; } - + /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) { if( 0 != saa7146_register_device(&dpc->vbi_dev, dev, "dpc", VFL_TYPE_VBI)) { @@ -205,18 +205,18 @@ static int dpc_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data printk("dpc: found 'dpc7146 demonstration board'-%d.\n",dpc_num); dpc_num++; - + /* the rest */ dpc->cur_input = 0; dpc_init_done(dev); - + return 0; } static int dpc_detach(struct saa7146_dev* dev) { struct dpc* dpc = (struct dpc*)dev->ext_priv; - + DEB_EE(("dev:%p\n",dev)); i2c_release_client(dpc->saa7111a); @@ -238,25 +238,25 @@ static int dpc_detach(struct saa7146_dev* dev) int dpc_vbi_bypass(struct saa7146_dev* dev) { struct dpc* dpc = (struct dpc*)dev->ext_priv; - + int i = 1; /* switch bypass in saa7111a */ if ( 0 != dpc->saa7111a->driver->command(dpc->saa7111a,SAA711X_VBI_BYPASS, &i)) { printk("dpc_v4l2.o: VBI_BYPASS: could not address saa7111a.\n"); return -1; - } + } return 0; } #endif -static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) +static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct saa7146_dev *dev = fh->dev; struct dpc* dpc = (struct dpc*)dev->ext_priv; /* - struct saa7146_vv *vv = dev->vv_data; + struct saa7146_vv *vv = dev->vv_data; */ switch(cmd) { @@ -264,11 +264,11 @@ static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct v4l2_input *i = arg; DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); - + if( i->index < 0 || i->index >= DPC_INPUTS) { return -EINVAL; } - + memcpy(i, &dpc_inputs[i->index], sizeof(struct v4l2_input)); DEB_D(("dpc_v4l2.o: v4l2_ioctl: VIDIOC_ENUMINPUT %d.\n",i->index)); @@ -289,13 +289,13 @@ static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) if (input < 0 || input >= DPC_INPUTS) { return -EINVAL; } - + dpc->cur_input = input; /* fixme: switch input here, switch audio, too! */ // saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); printk("dpc_v4l2.o: VIDIOC_S_INPUT: fixme switch input.\n"); - + return 0; } default: @@ -334,8 +334,8 @@ static struct saa7146_standard standard[] = { static struct saa7146_extension extension; static struct saa7146_pci_extension_data dpc = { - .ext_priv = "Multimedia eXtension Board", - .ext = &extension, + .ext_priv = "Multimedia eXtension Board", + .ext = &extension, }; static struct pci_device_id pci_tbl[] = { @@ -357,7 +357,7 @@ static struct saa7146_ext_vv vv_data = { .capabilities = V4L2_CAP_VBI_CAPTURE, .stds = &standard[0], .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), - .std_callback = &std_callback, + .std_callback = &std_callback, .ioctls = &ioctls[0], .ioctl = dpc_ioctl, }; @@ -365,7 +365,7 @@ static struct saa7146_ext_vv vv_data = { static struct saa7146_extension extension = { .name = "dpc7146 demonstration board", .flags = SAA7146_USE_I2C_IRQ, - + .pci_tbl = &pci_tbl[0], .module = THIS_MODULE, @@ -375,7 +375,7 @@ static struct saa7146_extension extension = { .irq_mask = 0, .irq_func = NULL, -}; +}; static int __init dpc_init_module(void) { @@ -383,7 +383,7 @@ static int __init dpc_init_module(void) DEB_S(("failed to register extension.\n")); return -ENODEV; } - + return 0; } diff --git a/drivers/media/video/dsbr100.c b/drivers/media/video/dsbr100.c new file mode 100644 index 000000000000..3b4e9985c3d7 --- /dev/null +++ b/drivers/media/video/dsbr100.c @@ -0,0 +1,429 @@ +/* A driver for the D-Link DSB-R100 USB radio. The R100 plugs + into both the USB and an analog audio input, so this thing + only deals with initialisation and frequency setting, the + audio data has to be handled by a sound driver. + + Major issue: I can't find out where the device reports the signal + strength, and indeed the windows software appearantly just looks + at the stereo indicator as well. So, scanning will only find + stereo stations. Sad, but I can't help it. + + Also, the windows program sends oodles of messages over to the + device, and I couldn't figure out their meaning. My suspicion + is that they don't have any:-) + + You might find some interesting stuff about this module at + http://unimut.fsk.uni-heidelberg.de/unimut/demi/dsbr + + Copyright (c) 2000 Markus Demleitner <msdemlei@cl.uni-heidelberg.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + History: + + Version 0.40: + Markus: Updates for 2.6.x kernels, code layout changes, name sanitizing + + Version 0.30: + Markus: Updates for 2.5.x kernel and more ISO compliant source + + Version 0.25: + PSL and Markus: Cleanup, radio now doesn't stop on device close + + Version 0.24: + Markus: Hope I got these silly VIDEO_TUNER_LOW issues finally + right. Some minor cleanup, improved standalone compilation + + Version 0.23: + Markus: Sign extension bug fixed by declaring transfer_buffer unsigned + + Version 0.22: + Markus: Some (brown bag) cleanup in what VIDIOCSTUNER returns, + thanks to Mike Cox for pointing the problem out. + + Version 0.21: + Markus: Minor cleanup, warnings if something goes wrong, lame attempt + to adhere to Documentation/CodingStyle + + Version 0.2: + Brad Hards <bradh@dynamite.com.au>: Fixes to make it work as non-module + Markus: Copyright clarification + + Version 0.01: Markus: initial release + +*/ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/smp_lock.h> + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.40" +#define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>" +#define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" + +#define DSB100_VENDOR 0x04b4 +#define DSB100_PRODUCT 0x1002 + +/* Commands the device appears to understand */ +#define DSB100_TUNE 1 +#define DSB100_ONOFF 2 + +#define TB_LEN 16 + +/* Frequency limits in MHz -- these are European values. For Japanese +devices, that would be 76 and 91. */ +#define FREQ_MIN 87.5 +#define FREQ_MAX 108.0 +#define FREQ_MUL 16000 + + +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void usb_dsbr100_disconnect(struct usb_interface *intf); +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static int usb_dsbr100_open(struct inode *inode, struct file *file); +static int usb_dsbr100_close(struct inode *inode, struct file *file); + +static int radio_nr = -1; +module_param(radio_nr, int, 0); + +/* Data for one (physical) device */ +typedef struct { + struct usb_device *usbdev; + struct video_device *videodev; + unsigned char transfer_buffer[TB_LEN]; + int curfreq; + int stereo; + int users; + int removed; +} dsbr100_device; + + +/* File system interface */ +static struct file_operations usb_dsbr100_fops = { + .owner = THIS_MODULE, + .open = usb_dsbr100_open, + .release = usb_dsbr100_close, + .ioctl = usb_dsbr100_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +/* V4L interface */ +static struct video_device dsbr100_videodev_template= +{ + .owner = THIS_MODULE, + .name = "D-Link DSB-R 100", + .type = VID_TYPE_TUNER, + .hardware = VID_HARDWARE_AZTECH, + .fops = &usb_dsbr100_fops, + .release = video_device_release, +}; + +static struct usb_device_id usb_dsbr100_device_table [] = { + { USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); + +/* USB subsystem interface */ +static struct usb_driver usb_dsbr100_driver = { + .name = "dsbr100", + .probe = usb_dsbr100_probe, + .disconnect = usb_dsbr100_disconnect, + .id_table = usb_dsbr100_device_table, +}; + +/* Low-level device interface begins here */ + +/* switch on radio */ +static int dsbr100_start(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + + +/* switch off radio */ +static int dsbr100_stop(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_ONOFF, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) + return -1; + return (radio->transfer_buffer)[0]; +} + +/* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ +static int dsbr100_setfreq(dsbr100_device *radio, int freq) +{ + freq = (freq/16*80)/1000+856; + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + DSB100_TUNE, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + (freq>>8)&0x00ff, freq&0xff, + radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || + usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { + radio->stereo = -1; + return -1; + } + radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); + return (radio->transfer_buffer)[0]; +} + +/* return the device status. This is, in effect, just whether it +sees a stereo signal or not. Pity. */ +static void dsbr100_getstat(dsbr100_device *radio) +{ + if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), + USB_REQ_GET_STATUS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) + radio->stereo = -1; + else + radio->stereo = ! (radio->transfer_buffer[0]&0x01); +} + + +/* USB subsystem interface begins here */ + +/* check if the device is present and register with v4l and +usb if it is */ +static int usb_dsbr100_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + dsbr100_device *radio; + + if (!(radio = kmalloc(sizeof(dsbr100_device), GFP_KERNEL))) + return -ENOMEM; + if (!(radio->videodev = video_device_alloc())) { + kfree(radio); + return -ENOMEM; + } + memcpy(radio->videodev, &dsbr100_videodev_template, + sizeof(dsbr100_videodev_template)); + radio->removed = 0; + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + radio->curfreq = FREQ_MIN*FREQ_MUL; + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, + radio_nr)) { + warn("Could not register video device"); + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + usb_set_intfdata(intf, radio); + return 0; +} + +/* handle unplugging of the device, release data structures +if nothing keeps us from doing it. If something is still +keeping us busy, the release callback of v4l will take care +of releasing it. stv680.c does not relase its private +data, so I don't do this here either. Checking out the +code I'd expect I better did that, but if there's a memory +leak here it's tiny (~50 bytes per disconnect) */ +static void usb_dsbr100_disconnect(struct usb_interface *intf) +{ + dsbr100_device *radio = usb_get_intfdata(intf); + + usb_set_intfdata (intf, NULL); + if (radio) { + video_unregister_device(radio->videodev); + radio->videodev = NULL; + if (radio->users) { + kfree(radio); + } else { + radio->removed = 1; + } + } +} + + +/* Video for Linux interface */ + +static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -EIO; + + switch(cmd) { + case VIDIOCGCAP: { + struct video_capability *v = arg; + + memset(v, 0, sizeof(*v)); + v->type = VID_TYPE_TUNER; + v->channels = 1; + v->audios = 1; + strcpy(v->name, "D-Link R-100 USB FM Radio"); + return 0; + } + case VIDIOCGTUNER: { + struct video_tuner *v = arg; + + dsbr100_getstat(radio); + if(v->tuner) /* Only 1 tuner */ + return -EINVAL; + v->rangelow = FREQ_MIN*FREQ_MUL; + v->rangehigh = FREQ_MAX*FREQ_MUL; + v->flags = VIDEO_TUNER_LOW; + v->mode = VIDEO_MODE_AUTO; + v->signal = radio->stereo*0x7000; + /* Don't know how to get signal strength */ + v->flags |= VIDEO_TUNER_STEREO_ON*radio->stereo; + strcpy(v->name, "DSB R-100"); + return 0; + } + case VIDIOCSTUNER: { + struct video_tuner *v = arg; + + if(v->tuner!=0) + return -EINVAL; + /* Only 1 tuner so no setting needed ! */ + return 0; + } + case VIDIOCGFREQ: { + int *freq = arg; + + if (radio->curfreq==-1) + return -EINVAL; + *freq = radio->curfreq; + return 0; + } + case VIDIOCSFREQ: { + int *freq = arg; + + radio->curfreq = *freq; + if (dsbr100_setfreq(radio, radio->curfreq)==-1) + warn("Set frequency failed"); + return 0; + } + case VIDIOCGAUDIO: { + struct video_audio *v = arg; + + memset(v, 0, sizeof(*v)); + v->flags |= VIDEO_AUDIO_MUTABLE; + v->mode = VIDEO_SOUND_STEREO; + v->volume = 1; + v->step = 1; + strcpy(v->name, "Radio"); + return 0; + } + case VIDIOCSAUDIO: { + struct video_audio *v = arg; + + if (v->audio) + return -EINVAL; + if (v->flags&VIDEO_AUDIO_MUTE) { + if (dsbr100_stop(radio)==-1) + warn("Radio did not respond properly"); + } + else + if (dsbr100_start(radio)==-1) + warn("Radio did not respond properly"); + return 0; + } + default: + return -ENOIOCTLCMD; + } +} + +static int usb_dsbr100_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl); +} + +static int usb_dsbr100_open(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + radio->users = 1; + if (dsbr100_start(radio)<0) { + warn("Radio did not start up properly"); + radio->users = 0; + return -EIO; + } + dsbr100_setfreq(radio, radio->curfreq); + return 0; +} + +static int usb_dsbr100_close(struct inode *inode, struct file *file) +{ + dsbr100_device *radio=video_get_drvdata(video_devdata(file)); + + if (!radio) + return -ENODEV; + radio->users = 0; + if (radio->removed) { + kfree(radio); + } + return 0; +} + +static int __init dsbr100_init(void) +{ + int retval = usb_register(&usb_dsbr100_driver); + info(DRIVER_VERSION ":" DRIVER_DESC); + return retval; +} + +static void __exit dsbr100_exit(void) +{ + usb_deregister(&usb_dsbr100_driver); +} + +module_init (dsbr100_init); +module_exit (dsbr100_exit); + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 885fd0170086..5a793ae7cc23 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -5,6 +5,7 @@ config VIDEO_EM28XX select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_IR + select VIDEO_SAA711X ---help--- This is a video4linux driver for Empia 28xx based TV cards. diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 58f7b4194a0d..f62fd706b45a 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -28,10 +28,10 @@ #include <linux/i2c.h> #include <linux/usb.h> #include <media/tuner.h> -#include <media/audiochip.h> +#include <media/msp3400.h> #include <media/tveeprom.h> +#include <media/audiochip.h> #include <media/v4l2-common.h> -#include "msp3400.h" #include "em28xx.h" @@ -72,6 +72,24 @@ struct em28xx_board em28xx_boards[] = { .amux = 1, }}, }, + [EM2820_BOARD_KWORLD_PVRTV2800RF] = { + .name = "Kworld PVR TV 2800 RF", + .is_em2800 = 0, + .vchannels = 2, + .norm = VIDEO_MODE_PAL, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, [EM2820_BOARD_TERRATEC_CINERGY_250] = { .name = "Terratec Cinergy 250 USB", .vchannels = 3, @@ -83,7 +101,7 @@ struct em28xx_board em28xx_boards[] = { .input = {{ .type = EM28XX_VMUX_TELEVISION, .vmux = 2, - .amux = 0, + .amux = 1, },{ .type = EM28XX_VMUX_COMPOSITE1, .vmux = 0, @@ -129,11 +147,12 @@ struct em28xx_board em28xx_boards[] = { .input = {{ .type = EM28XX_VMUX_TELEVISION, .vmux = 0, - .amux = 6, + .amux = MSP_INPUT_DEFAULT, },{ .type = EM28XX_VMUX_SVIDEO, .vmux = 2, - .amux = 1, + .amux = MSP_INPUT(MSP_IN_SCART_1, MSP_IN_TUNER_1, + MSP_DSP_OUT_SCART, MSP_DSP_OUT_SCART), }}, }, [EM2820_BOARD_MSI_VOX_USB_2] = { @@ -257,27 +276,51 @@ struct usb_device_id em28xx_id_table [] = { { }, }; +void em28xx_pre_card_setup(struct em28xx *dev) +{ + /* request some modules */ + switch(dev->model){ + case EM2880_BOARD_TERRATEC_PRODIGY_XS: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_TERRATEC_HYBRID_XS: + { + em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); // reset through GPIO? + break; + } + } +} + void em28xx_card_setup(struct em28xx *dev) { /* request some modules */ - if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) { - struct tveeprom tv; + switch(dev->model){ + case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: + { + struct tveeprom tv; #ifdef CONFIG_MODULES - request_module("tveeprom"); - request_module("ir-kbd-i2c"); - request_module("msp3400"); + request_module("tveeprom"); + request_module("ir-kbd-i2c"); + request_module("msp3400"); #endif - /* Call first TVeeprom */ + /* Call first TVeeprom */ + + dev->i2c_client.addr = 0xa0 >> 1; + tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); - dev->i2c_client.addr = 0xa0 >> 1; - tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); + dev->tuner_type= tv.tuner_type; + if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { + dev->i2s_speed=2048000; + dev->has_msp34xx=1; + } else + dev->has_msp34xx=0; + break; + } + case EM2820_BOARD_KWORLD_PVRTV2800RF: + { + em28xx_write_regs_req(dev,0x00,0x08, "\xf9", 1); // GPIO enables sound on KWORLD PVR TV 2800RF + break; + } - dev->tuner_type= tv.tuner_type; - if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { - dev->i2s_speed=2048000; - dev->has_msp34xx=1; - } else - dev->has_msp34xx=0; } } diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 6ca8631bc36d..5b6cece37aee 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -420,7 +420,6 @@ static int em28xx_set_tuner(int check_eeprom, struct i2c_client *client) tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; tun_setup.type = dev->tuner_type; tun_setup.addr = dev->tuner_addr; - em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup); } diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index 30dfa5370c73..31e89e4f18be 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -43,91 +43,6 @@ MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); #define dprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) -/* ---------------------------------------------------------------------- */ - -static IR_KEYTAB_TYPE ir_codes_em_terratec[IR_KEYTAB_SIZE] = { - [ 0x01 ] = KEY_CHANNEL, - [ 0x02 ] = KEY_SELECT, - [ 0x03 ] = KEY_MUTE, - [ 0x04 ] = KEY_POWER, - [ 0x05 ] = KEY_KP1, - [ 0x06 ] = KEY_KP2, - [ 0x07 ] = KEY_KP3, - [ 0x08 ] = KEY_CHANNELUP, - [ 0x09 ] = KEY_KP4, - [ 0x0a ] = KEY_KP5, - [ 0x0b ] = KEY_KP6, - [ 0x0c ] = KEY_CHANNELDOWN, - [ 0x0d ] = KEY_KP7, - [ 0x0e ] = KEY_KP8, - [ 0x0f ] = KEY_KP9, - [ 0x10 ] = KEY_VOLUMEUP, - [ 0x11 ] = KEY_KP0, - [ 0x12 ] = KEY_MENU, - [ 0x13 ] = KEY_PRINT, - [ 0x14 ] = KEY_VOLUMEDOWN, - [ 0x16 ] = KEY_PAUSE, - [ 0x18 ] = KEY_RECORD, - [ 0x19 ] = KEY_REWIND, - [ 0x1a ] = KEY_PLAY, - [ 0x1b ] = KEY_FORWARD, - [ 0x1c ] = KEY_BACKSPACE, - [ 0x1e ] = KEY_STOP, - [ 0x40 ] = KEY_ZOOM, -}; - -static IR_KEYTAB_TYPE ir_codes_em_pinnacle_usb[IR_KEYTAB_SIZE] = { - [ 0x3a ] = KEY_KP0, - [ 0x31 ] = KEY_KP1, - [ 0x32 ] = KEY_KP2, - [ 0x33 ] = KEY_KP3, - [ 0x34 ] = KEY_KP4, - [ 0x35 ] = KEY_KP5, - [ 0x36 ] = KEY_KP6, - [ 0x37 ] = KEY_KP7, - [ 0x38 ] = KEY_KP8, - [ 0x39 ] = KEY_KP9, - - [ 0x2f ] = KEY_POWER, - - [ 0x2e ] = KEY_P, - [ 0x1f ] = KEY_L, - [ 0x2b ] = KEY_I, - - [ 0x2d ] = KEY_ZOOM, - [ 0x1e ] = KEY_ZOOM, - [ 0x1b ] = KEY_VOLUMEUP, - [ 0x0f ] = KEY_VOLUMEDOWN, - [ 0x17 ] = KEY_CHANNELUP, - [ 0x1c ] = KEY_CHANNELDOWN, - [ 0x25 ] = KEY_INFO, - - [ 0x3c ] = KEY_MUTE, - - [ 0x3d ] = KEY_LEFT, - [ 0x3b ] = KEY_RIGHT, - - [ 0x3f ] = KEY_UP, - [ 0x3e ] = KEY_DOWN, - [ 0x1a ] = KEY_PAUSE, - - [ 0x1d ] = KEY_MENU, - [ 0x19 ] = KEY_PLAY, - [ 0x16 ] = KEY_REWIND, - [ 0x13 ] = KEY_FORWARD, - [ 0x15 ] = KEY_PAUSE, - [ 0x0e ] = KEY_REWIND, - [ 0x0d ] = KEY_PLAY, - [ 0x0b ] = KEY_STOP, - [ 0x07 ] = KEY_FORWARD, - [ 0x27 ] = KEY_RECORD, - [ 0x26 ] = KEY_TUNER, - [ 0x29 ] = KEY_TEXT, - [ 0x2a ] = KEY_MEDIA, - [ 0x18 ] = KEY_EPG, - [ 0x27 ] = KEY_RECORD, -}; - /* ----------------------------------------------------------------------- */ static int get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 5b267808a9d4..dfba33d0fa61 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -28,6 +28,7 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/kernel.h> +#include <linux/bitmap.h> #include <linux/usb.h> #include <linux/i2c.h> #include <linux/version.h> @@ -37,6 +38,7 @@ #include "em28xx.h" #include <media/tuner.h> #include <media/v4l2-common.h> +#include <media/msp3400.h> #define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \ "Markus Rechberger <mrechberger@gmail.com>, " \ @@ -59,8 +61,14 @@ MODULE_LICENSE("GPL"); static LIST_HEAD(em28xx_devlist); static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; +static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; +static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); +module_param_array(video_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); MODULE_PARM_DESC(card,"card type"); +MODULE_PARM_DESC(video_nr,"video device numbers"); +MODULE_PARM_DESC(vbi_nr,"vbi device numbers"); static int tuner = -1; module_param(tuner, int, 0444); @@ -70,6 +78,9 @@ static unsigned int video_debug = 0; module_param(video_debug,int,0644); MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); +/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */ +static unsigned long em28xx_devused; + /* supported tv norms */ static struct em28xx_tvnorm tvnorms[] = { { @@ -91,23 +102,6 @@ static struct em28xx_tvnorm tvnorms[] = { } }; -static const unsigned char saa7114_i2c_init[] = { - 0x00,0x00,0x01,0x08,0x02,0xc4,0x03,0x30,0x04,0x90,0x05,0x90,0x06,0xeb,0x07,0xe0, - 0x08,0x88,0x09,0x40,0x0a,0x80,0x0b,0x44,0x0c,0x40,0x0d,0x00,0x0e,0x81,0x0f,0x2a, - 0x10,0x06,0x11,0x00,0x12,0xc8,0x13,0x80,0x14,0x00,0x15,0x11,0x16,0x01,0x17,0x42, - 0x18,0x40,0x19,0x80,0x40,0x00,0x41,0xff,0x42,0xff,0x43,0xff,0x44,0xff,0x45,0xff, - 0x46,0xff,0x47,0xff,0x48,0xff,0x49,0xff,0x4a,0xff,0x4b,0xff,0x4c,0xff,0x4d,0xff, - 0x4e,0xff,0x4f,0xff,0x50,0xff,0x51,0xff,0x52,0xff,0x53,0xff,0x54,0x5f,0x55,0xff, - 0x56,0xff,0x57,0xff,0x58,0x00,0x59,0x47,0x5a,0x03,0x5b,0x03,0x5d,0x3e,0x5e,0x00, - 0x80,0x1c,0x83,0x01,0x84,0xa5,0x85,0x10,0x86,0x45,0x87,0x41,0x88,0xf0,0x88,0x00, - 0x88,0xf0,0x90,0x00,0x91,0x08,0x92,0x00,0x93,0x80,0x94,0x08,0x95,0x00,0x96,0xc0, - 0x97,0x02,0x98,0x13,0x99,0x00,0x9a,0x38,0x9b,0x01,0x9c,0x80,0x9d,0x02,0x9e,0x06, - 0x9f,0x01,0xa0,0x01,0xa1,0x00,0xa2,0x00,0xa4,0x80,0xa5,0x36,0xa6,0x36,0xa8,0x67, - 0xa9,0x04,0xaa,0x00,0xac,0x33,0xad,0x02,0xae,0x00,0xb0,0xcd,0xb1,0x04,0xb2,0xcd, - 0xb3,0x04,0xb4,0x01,0xb8,0x00,0xb9,0x00,0xba,0x00,0xbb,0x00,0xbc,0x00,0xbd,0x00, - 0xbe,0x00,0xbf,0x00 -}; - #define TVNORMS ARRAY_SIZE(tvnorms) /* supported controls */ @@ -134,65 +128,6 @@ static struct v4l2_queryctrl em28xx_qctrl[] = { } }; -/* FIXME: These are specific to saa711x - should be moved to its code */ -static struct v4l2_queryctrl saa711x_qctrl[] = { - { - .id = V4L2_CID_BRIGHTNESS, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Brightness", - .minimum = -128, - .maximum = 127, - .step = 1, - .default_value = 0, - .flags = 0, - },{ - .id = V4L2_CID_CONTRAST, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Contrast", - .minimum = 0x0, - .maximum = 0x1f, - .step = 0x1, - .default_value = 0x10, - .flags = 0, - },{ - .id = V4L2_CID_SATURATION, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Saturation", - .minimum = 0x0, - .maximum = 0x1f, - .step = 0x1, - .default_value = 0x10, - .flags = 0, - },{ - .id = V4L2_CID_RED_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Red chroma balance", - .minimum = -128, - .maximum = 127, - .step = 1, - .default_value = 0, - .flags = 0, - },{ - .id = V4L2_CID_BLUE_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Blue chroma balance", - .minimum = -128, - .maximum = 127, - .step = 1, - .default_value = 0, - .flags = 0, - },{ - .id = V4L2_CID_GAMMA, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Gamma", - .minimum = 0x0, - .maximum = 0x3f, - .step = 0x1, - .default_value = 0x20, - .flags = 0, - } -}; - static struct usb_driver em28xx_usb_driver; static DEFINE_MUTEX(em28xx_sysfs_lock); @@ -211,6 +146,11 @@ static int em28xx_config(struct em28xx *dev) em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); /* enable vbi capturing */ + +/* em28xx_write_regs_req(dev,0x00,0x0e,"\xC0",1); audio register */ +/* em28xx_write_regs_req(dev,0x00,0x0f,"\x80",1); clk register */ + em28xx_write_regs_req(dev,0x00,0x11,"\x51",1); + em28xx_audio_usb_mute(dev, 1); dev->mute = 1; /* maybe not the right place... */ dev->volume = 0x1f; @@ -230,22 +170,9 @@ static int em28xx_config(struct em28xx *dev) static void em28xx_config_i2c(struct em28xx *dev) { struct v4l2_frequency f; - struct video_decoder_init em28xx_vdi = {.data = NULL }; - - - /* configure decoder */ - if(dev->model == EM2820_BOARD_MSI_VOX_USB_2){ - em28xx_vdi.data=saa7114_i2c_init; - em28xx_vdi.len=sizeof(saa7114_i2c_init); - } - - - em28xx_i2c_call_clients(dev, DECODER_INIT, &em28xx_vdi); - em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &dev->ctl_input); -/* em28xx_i2c_call_clients(dev,DECODER_SET_PICTURE, &dev->vpic); */ -/* em28xx_i2c_call_clients(dev,DECODER_SET_NORM,&dev->tvnorm->id); */ -/* em28xx_i2c_call_clients(dev,DECODER_ENABLE_OUTPUT,&output); */ -/* em28xx_i2c_call_clients(dev,DECODER_DUMP, NULL); */ + em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL); + em28xx_i2c_call_clients(dev, VIDIOC_S_INPUT, &dev->ctl_input); + em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL); /* configure tuner */ f.tuner = 0; @@ -285,24 +212,28 @@ static void video_mux(struct em28xx *dev, int index) dev->ctl_input = index; dev->ctl_ainput = INPUT(index)->amux; - em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &input); - + em28xx_i2c_call_clients(dev, VIDIOC_S_INPUT, &input); em28xx_videodbg("Setting input index=%d, vmux=%d, amux=%d\n",index,input,dev->ctl_ainput); if (dev->has_msp34xx) { + struct v4l2_routing route; + if (dev->i2s_speed) em28xx_i2c_call_clients(dev, VIDIOC_INT_I2S_CLOCK_FREQ, &dev->i2s_speed); - em28xx_i2c_call_clients(dev, VIDIOC_S_AUDIO, &dev->ctl_ainput); + route.input = dev->ctl_ainput; + route.output = MSP_OUTPUT(MSP_OUT_SCART1_DA); + /* Note: this is msp3400 specific */ + em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route); ainput = EM28XX_AUDIO_SRC_TUNER; em28xx_audio_source(dev, ainput); } else { switch (dev->ctl_ainput) { - case 0: - ainput = EM28XX_AUDIO_SRC_TUNER; - break; - default: - ainput = EM28XX_AUDIO_SRC_LINE; + case 0: + ainput = EM28XX_AUDIO_SRC_TUNER; + break; + default: + ainput = EM28XX_AUDIO_SRC_LINE; } em28xx_audio_source(dev, ainput); } @@ -323,13 +254,20 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) h = list_entry(list, struct em28xx, devlist); if (h->vdev->minor == minor) { dev = h; + dev->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + if (h->vbi_dev->minor == minor) { + dev = h; + dev->type = V4L2_BUF_TYPE_VBI_CAPTURE; } } + if (NULL == dev) + return -ENODEV; filp->private_data=dev; - - em28xx_videodbg("users=%d\n", dev->users); + em28xx_videodbg("open minor=%d type=%s users=%d\n", + minor,v4l2_type_names[dev->type],dev->users); if (!down_read_trylock(&em28xx_disconnect)) return -ERESTARTSYS; @@ -340,40 +278,36 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) return -EBUSY; } -/* if(dev->vbi_dev->minor == minor){ - dev->type=V4L2_BUF_TYPE_VBI_CAPTURE; - }*/ - if (dev->vdev->minor == minor) { - dev->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - } - - init_MUTEX(&dev->fileop_lock); /* to 1 == available */ + mutex_init(&dev->fileop_lock); /* to 1 == available */ spin_lock_init(&dev->queue_lock); init_waitqueue_head(&dev->wait_frame); init_waitqueue_head(&dev->wait_stream); - down(&dev->lock); + mutex_lock(&dev->lock); - em28xx_set_alternate(dev); + if (dev->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + em28xx_set_alternate(dev); - dev->width = norm_maxw(dev); - dev->height = norm_maxh(dev); - dev->frame_size = dev->width * dev->height * 2; - dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */ - dev->bytesperline = dev->width * 2; - dev->hscale = 0; - dev->vscale = 0; + dev->width = norm_maxw(dev); + dev->height = norm_maxh(dev); + dev->frame_size = dev->width * dev->height * 2; + dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */ + dev->bytesperline = dev->width * 2; + dev->hscale = 0; + dev->vscale = 0; - em28xx_capture_start(dev, 1); - em28xx_resolution_set(dev); + em28xx_capture_start(dev, 1); + em28xx_resolution_set(dev); - /* device needs to be initialized before isoc transfer */ - video_mux(dev, 0); + /* device needs to be initialized before isoc transfer */ + video_mux(dev, 0); + + /* start the transfer */ + errCode = em28xx_init_isoc(dev); + if (errCode) + goto err; - /* start the transfer */ - errCode = em28xx_init_isoc(dev); - if (errCode) - goto err; + } dev->users++; filp->private_data = dev; @@ -386,10 +320,8 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev->state |= DEV_INITIALIZED; - video_mux(dev, 0); - - err: - up(&dev->lock); +err: + mutex_unlock(&dev->lock); up_read(&em28xx_disconnect); return errCode; } @@ -403,14 +335,21 @@ static void em28xx_release_resources(struct em28xx *dev) { mutex_lock(&em28xx_sysfs_lock); - em28xx_info("V4L2 device /dev/video%d deregistered\n", - dev->vdev->minor); + /*FIXME: I2C IR should be disconnected */ + + em28xx_info("V4L2 devices /dev/video%d and /dev/vbi%d deregistered\n", + dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, + dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); list_del(&dev->devlist); video_unregister_device(dev->vdev); -/* video_unregister_device(dev->vbi_dev); */ + video_unregister_device(dev->vbi_dev); em28xx_i2c_unregister(dev); usb_put_dev(dev->udev); mutex_unlock(&em28xx_sysfs_lock); + + + /* Mark device as unused */ + em28xx_devused&=~(1<<dev->devno); } /* @@ -424,7 +363,7 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) em28xx_videodbg("users=%d\n", dev->users); - down(&dev->lock); + mutex_lock(&dev->lock); em28xx_uninit_isoc(dev); @@ -433,7 +372,7 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) /* the device is already disconnect, free the remaining resources */ if (dev->state & DEV_DISCONNECTED) { em28xx_release_resources(dev); - up(&dev->lock); + mutex_unlock(&dev->lock); kfree(dev); return 0; } @@ -449,7 +388,7 @@ static int em28xx_v4l2_close(struct inode *inode, struct file *filp) dev->users--; wake_up_interruptible_nr(&dev->open, 1); - up(&dev->lock); + mutex_unlock(&dev->lock); return 0; } @@ -466,32 +405,54 @@ em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count, int ret = 0; struct em28xx *dev = filp->private_data; - if (down_interruptible(&dev->fileop_lock)) + if (dev->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + em28xx_videodbg("V4l2_Buf_type_videocapture is set\n"); + } + if (dev->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + em28xx_videodbg("V4L2_BUF_TYPE_VBI_CAPTURE is set\n"); + em28xx_videodbg("not supported yet! ...\n"); + if (copy_to_user(buf, "", 1)) { + mutex_unlock(&dev->fileop_lock); + return -EFAULT; + } + return (1); + } + if (dev->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { + em28xx_videodbg("V4L2_BUF_TYPE_SLICED_VBI_CAPTURE is set\n"); + em28xx_videodbg("not supported yet! ...\n"); + if (copy_to_user(buf, "", 1)) { + mutex_unlock(&dev->fileop_lock); + return -EFAULT; + } + return (1); + } + + if (mutex_lock_interruptible(&dev->fileop_lock)) return -ERESTARTSYS; if (dev->state & DEV_DISCONNECTED) { em28xx_videodbg("device not present\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -ENODEV; } if (dev->state & DEV_MISCONFIGURED) { em28xx_videodbg("device misconfigured; close and open it again\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EIO; } if (dev->io == IO_MMAP) { em28xx_videodbg ("IO method is set to mmap; close and open" " the device again to choose the read method\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EINVAL; } if (dev->io == IO_NONE) { if (!em28xx_request_buffers(dev, EM28XX_NUM_READ_FRAMES)) { em28xx_errdev("read failed, not enough memory\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -ENOMEM; } dev->io = IO_READ; @@ -500,13 +461,13 @@ em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count, } if (!count) { - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return 0; } if (list_empty(&dev->outqueue)) { if (filp->f_flags & O_NONBLOCK) { - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EAGAIN; } ret = wait_event_interruptible @@ -514,11 +475,11 @@ em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count, (!list_empty(&dev->outqueue)) || (dev->state & DEV_DISCONNECTED)); if (ret) { - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return ret; } if (dev->state & DEV_DISCONNECTED) { - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -ENODEV; } } @@ -537,12 +498,12 @@ em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count, count = f->buf.length; if (copy_to_user(buf, f->bufmem, count)) { - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EFAULT; } *f_pos += count; - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return count; } @@ -556,7 +517,7 @@ static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait) unsigned int mask = 0; struct em28xx *dev = filp->private_data; - if (down_interruptible(&dev->fileop_lock)) + if (mutex_lock_interruptible(&dev->fileop_lock)) return POLLERR; if (dev->state & DEV_DISCONNECTED) { @@ -582,13 +543,13 @@ static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait) if (!list_empty(&dev->outqueue)) mask |= POLLIN | POLLRDNORM; - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return mask; } } - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return POLLERR; } @@ -628,25 +589,25 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) struct em28xx *dev = filp->private_data; - if (down_interruptible(&dev->fileop_lock)) + if (mutex_lock_interruptible(&dev->fileop_lock)) return -ERESTARTSYS; if (dev->state & DEV_DISCONNECTED) { em28xx_videodbg("mmap: device not present\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -ENODEV; } if (dev->state & DEV_MISCONFIGURED) { em28xx_videodbg ("mmap: Device is misconfigured; close and " "open it again\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EIO; } if (dev->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || size != PAGE_ALIGN(dev->frame[0].buf.length)) { - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EINVAL; } @@ -656,7 +617,7 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) } if (i == dev->num_frames) { em28xx_videodbg("mmap: user supplied mapping address is out of range\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EINVAL; } @@ -668,7 +629,7 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) while (size > 0) { /* size is page-aligned */ if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { em28xx_videodbg("mmap: vm_insert_page failed\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EAGAIN; } start += PAGE_SIZE; @@ -680,7 +641,7 @@ static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_private_data = &dev->frame[i]; em28xx_vm_open(vma); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return 0; } @@ -702,43 +663,6 @@ static int em28xx_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) } } -/*FIXME: should be moved to saa711x */ -static int saa711x_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) -{ - s32 tmp; - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - if ((tmp = em28xx_brightness_get(dev)) < 0) - return -EIO; - ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ - return 0; - case V4L2_CID_CONTRAST: - if ((ctrl->value = em28xx_contrast_get(dev)) < 0) - return -EIO; - return 0; - case V4L2_CID_SATURATION: - if ((ctrl->value = em28xx_saturation_get(dev)) < 0) - return -EIO; - return 0; - case V4L2_CID_RED_BALANCE: - if ((tmp = em28xx_v_balance_get(dev)) < 0) - return -EIO; - ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ - return 0; - case V4L2_CID_BLUE_BALANCE: - if ((tmp = em28xx_u_balance_get(dev)) < 0) - return -EIO; - ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ - return 0; - case V4L2_CID_GAMMA: - if ((ctrl->value = em28xx_gamma_get(dev)) < 0) - return -EIO; - return 0; - default: - return -EINVAL; - } -} - /* * em28xx_set_ctrl() * mute or set new saturation, brightness or contrast @@ -761,27 +685,6 @@ static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) } } -/*FIXME: should be moved to saa711x */ -static int saa711x_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) -{ - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - return em28xx_brightness_set(dev, ctrl->value); - case V4L2_CID_CONTRAST: - return em28xx_contrast_set(dev, ctrl->value); - case V4L2_CID_SATURATION: - return em28xx_saturation_set(dev, ctrl->value); - case V4L2_CID_RED_BALANCE: - return em28xx_v_balance_set(dev, ctrl->value); - case V4L2_CID_BLUE_BALANCE: - return em28xx_u_balance_set(dev, ctrl->value); - case V4L2_CID_GAMMA: - return em28xx_gamma_set(dev, ctrl->value); - default: - return -EINVAL; - } -} - /* * em28xx_stream_interrupt() * stops streaming @@ -802,7 +705,8 @@ static int em28xx_stream_interrupt(struct em28xx *dev) else if (ret) { dev->state |= DEV_MISCONFIGURED; em28xx_videodbg("device is misconfigured; close and " - "open /dev/video%d again\n", dev->vdev->minor); + "open /dev/video%d again\n", + dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN); return ret; } @@ -853,6 +757,181 @@ static int em28xx_set_norm(struct em28xx *dev, int width, int height) return 0; } +static int em28xx_get_fmt(struct em28xx *dev, struct v4l2_format *format) +{ + em28xx_videodbg("VIDIOC_G_FMT: type=%s\n", + (format->type ==V4L2_BUF_TYPE_VIDEO_CAPTURE) ? + "V4L2_BUF_TYPE_VIDEO_CAPTURE" : + (format->type ==V4L2_BUF_TYPE_VBI_CAPTURE) ? + "V4L2_BUF_TYPE_VBI_CAPTURE" : + (format->type ==V4L2_CAP_SLICED_VBI_CAPTURE) ? + "V4L2_BUF_TYPE_SLICED_VBI_CAPTURE " : + "not supported"); + + switch (format->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + { + format->fmt.pix.width = dev->width; + format->fmt.pix.height = dev->height; + format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + format->fmt.pix.bytesperline = dev->bytesperline; + format->fmt.pix.sizeimage = dev->frame_size; + format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + format->fmt.pix.field = dev->interlaced ? V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */ + + em28xx_videodbg("VIDIOC_G_FMT: %dx%d\n", dev->width, + dev->height); + break; + } + + case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + { + format->fmt.sliced.service_set=0; + + em28xx_i2c_call_clients(dev,VIDIOC_G_FMT,format); + + if (format->fmt.sliced.service_set==0) + return -EINVAL; + + break; + } + + default: + return -EINVAL; + } + return (0); +} + +static int em28xx_set_fmt(struct em28xx *dev, unsigned int cmd, struct v4l2_format *format) +{ + u32 i; + int ret = 0; + int width = format->fmt.pix.width; + int height = format->fmt.pix.height; + unsigned int hscale, vscale; + unsigned int maxh, maxw; + + maxw = norm_maxw(dev); + maxh = norm_maxh(dev); + + em28xx_videodbg("%s: type=%s\n", + cmd == VIDIOC_TRY_FMT ? + "VIDIOC_TRY_FMT" : "VIDIOC_S_FMT", + format->type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? + "V4L2_BUF_TYPE_VIDEO_CAPTURE" : + format->type == V4L2_BUF_TYPE_VBI_CAPTURE ? + "V4L2_BUF_TYPE_VBI_CAPTURE " : + "not supported"); + + if (format->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { + em28xx_i2c_call_clients(dev,VIDIOC_G_FMT,format); + + if (format->fmt.sliced.service_set==0) + return -EINVAL; + + return 0; + } + + + if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + em28xx_videodbg("%s: requested %dx%d\n", + cmd == VIDIOC_TRY_FMT ? + "VIDIOC_TRY_FMT" : "VIDIOC_S_FMT", + format->fmt.pix.width, format->fmt.pix.height); + + /* FIXME: Move some code away from here */ + /* width must even because of the YUYV format */ + /* height must be even because of interlacing */ + height &= 0xfffe; + width &= 0xfffe; + + if (height < 32) + height = 32; + if (height > maxh) + height = maxh; + if (width < 48) + width = 48; + if (width > maxw) + width = maxw; + + if(dev->is_em2800){ + /* the em2800 can only scale down to 50% */ + if(height % (maxh / 2)) + height=maxh; + if(width % (maxw / 2)) + width=maxw; + /* according to empiatech support */ + /* the MaxPacketSize is to small to support */ + /* framesizes larger than 640x480 @ 30 fps */ + /* or 640x576 @ 25 fps. As this would cut */ + /* of a part of the image we prefer */ + /* 360x576 or 360x480 for now */ + if(width == maxw && height == maxh) + width /= 2; + } + + if ((hscale = (((unsigned long)maxw) << 12) / width - 4096L) >= 0x4000) + hscale = 0x3fff; + + width = (((unsigned long)maxw) << 12) / (hscale + 4096L); + + if ((vscale = (((unsigned long)maxh) << 12) / height - 4096L) >= 0x4000) + vscale = 0x3fff; + + height = (((unsigned long)maxh) << 12) / (vscale + 4096L); + + format->fmt.pix.width = width; + format->fmt.pix.height = height; + format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + format->fmt.pix.bytesperline = width * 2; + format->fmt.pix.sizeimage = width * 2 * height; + format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + format->fmt.pix.field = V4L2_FIELD_INTERLACED; + + em28xx_videodbg("%s: returned %dx%d (%d, %d)\n", + cmd == VIDIOC_TRY_FMT ? + "VIDIOC_TRY_FMT" :"VIDIOC_S_FMT", + format->fmt.pix.width, format->fmt.pix.height, hscale, vscale); + + if (cmd == VIDIOC_TRY_FMT) + return 0; + + for (i = 0; i < dev->num_frames; i++) + if (dev->frame[i].vma_use_count) { + em28xx_videodbg("VIDIOC_S_FMT failed. " + "Unmap the buffers first.\n"); + return -EINVAL; + } + + /* stop io in case it is already in progress */ + if (dev->stream == STREAM_ON) { + em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n"); + if ((ret = em28xx_stream_interrupt(dev))) + return ret; + } + + em28xx_release_buffers(dev); + dev->io = IO_NONE; + + /* set new image size */ + dev->width = width; + dev->height = height; + dev->frame_size = dev->width * dev->height * 2; + dev->field_size = dev->frame_size >> 1; + dev->bytesperline = dev->width * 2; + dev->hscale = hscale; + dev->vscale = vscale; + em28xx_uninit_isoc(dev); + em28xx_set_alternate(dev); + em28xx_capture_start(dev, 1); + em28xx_resolution_set(dev); + em28xx_init_isoc(dev); + + return 0; +} + /* * em28xx_v4l2_do_ioctl() * This function is _not_ called directly, but from @@ -868,392 +947,325 @@ static int em28xx_do_ioctl(struct inode *inode, struct file *filp, switch (cmd) { /* ---------- tv norms ---------- */ case VIDIOC_ENUMSTD: - { - struct v4l2_standard *e = arg; - unsigned int i; + { + struct v4l2_standard *e = arg; + unsigned int i; - i = e->index; - if (i >= TVNORMS) - return -EINVAL; - ret = v4l2_video_std_construct(e, tvnorms[e->index].id, - tvnorms[e->index].name); - e->index = i; - if (ret < 0) - return ret; - return 0; - } + i = e->index; + if (i >= TVNORMS) + return -EINVAL; + ret = v4l2_video_std_construct(e, tvnorms[e->index].id, + tvnorms[e->index].name); + e->index = i; + if (ret < 0) + return ret; + return 0; + } case VIDIOC_G_STD: - { - v4l2_std_id *id = arg; + { + v4l2_std_id *id = arg; - *id = dev->tvnorm->id; - return 0; - } + *id = dev->tvnorm->id; + return 0; + } case VIDIOC_S_STD: - { - v4l2_std_id *id = arg; - unsigned int i; + { + v4l2_std_id *id = arg; + unsigned int i; + for (i = 0; i < TVNORMS; i++) + if (*id == tvnorms[i].id) + break; + if (i == TVNORMS) for (i = 0; i < TVNORMS; i++) - if (*id == tvnorms[i].id) + if (*id & tvnorms[i].id) break; - if (i == TVNORMS) - for (i = 0; i < TVNORMS; i++) - if (*id & tvnorms[i].id) - break; - if (i == TVNORMS) - return -EINVAL; - - down(&dev->lock); - dev->tvnorm = &tvnorms[i]; + if (i == TVNORMS) + return -EINVAL; - em28xx_set_norm(dev, dev->width, dev->height); + mutex_lock(&dev->lock); + dev->tvnorm = &tvnorms[i]; -/* - dev->width=norm_maxw(dev); - dev->height=norm_maxh(dev); - dev->frame_size=dev->width*dev->height*2; - dev->field_size=dev->frame_size>>1; - dev->bytesperline=dev->width*2; - dev->hscale=0; - dev->vscale=0; + em28xx_set_norm(dev, dev->width, dev->height); - em28xx_resolution_set(dev); -*/ -/* - em28xx_uninit_isoc(dev); - em28xx_set_alternate(dev); - em28xx_capture_start(dev, 1); - em28xx_resolution_set(dev); - em28xx_init_isoc(dev); -*/ - em28xx_i2c_call_clients(dev, DECODER_SET_NORM, - &tvnorms[i].mode); - em28xx_i2c_call_clients(dev, VIDIOC_S_STD, - &dev->tvnorm->id); + em28xx_i2c_call_clients(dev, VIDIOC_S_STD, + &dev->tvnorm->id); - up(&dev->lock); + mutex_unlock(&dev->lock); - return 0; - } + return 0; + } - /* ------ input switching ---------- */ + /* ------ input switching ---------- */ case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; - unsigned int n; - static const char *iname[] = { - [EM28XX_VMUX_COMPOSITE1] = "Composite1", - [EM28XX_VMUX_COMPOSITE2] = "Composite2", - [EM28XX_VMUX_COMPOSITE3] = "Composite3", - [EM28XX_VMUX_COMPOSITE4] = "Composite4", - [EM28XX_VMUX_SVIDEO] = "S-Video", - [EM28XX_VMUX_TELEVISION] = "Television", - [EM28XX_VMUX_CABLE] = "Cable TV", - [EM28XX_VMUX_DVB] = "DVB", - [EM28XX_VMUX_DEBUG] = "for debug only", - }; - - n = i->index; - if (n >= MAX_EM28XX_INPUT) - return -EINVAL; - if (0 == INPUT(n)->type) - return -EINVAL; - memset(i, 0, sizeof(*i)); - i->index = n; - i->type = V4L2_INPUT_TYPE_CAMERA; - strcpy(i->name, iname[INPUT(n)->type]); - if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type) || - (EM28XX_VMUX_CABLE == INPUT(n)->type)) - i->type = V4L2_INPUT_TYPE_TUNER; - for (n = 0; n < ARRAY_SIZE(tvnorms); n++) - i->std |= tvnorms[n].id; - return 0; - } - + { + struct v4l2_input *i = arg; + unsigned int n; + static const char *iname[] = { + [EM28XX_VMUX_COMPOSITE1] = "Composite1", + [EM28XX_VMUX_COMPOSITE2] = "Composite2", + [EM28XX_VMUX_COMPOSITE3] = "Composite3", + [EM28XX_VMUX_COMPOSITE4] = "Composite4", + [EM28XX_VMUX_SVIDEO] = "S-Video", + [EM28XX_VMUX_TELEVISION] = "Television", + [EM28XX_VMUX_CABLE] = "Cable TV", + [EM28XX_VMUX_DVB] = "DVB", + [EM28XX_VMUX_DEBUG] = "for debug only", + }; + + n = i->index; + if (n >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(n)->type) + return -EINVAL; + memset(i, 0, sizeof(*i)); + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, iname[INPUT(n)->type]); + if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type) || + (EM28XX_VMUX_CABLE == INPUT(n)->type)) + i->type = V4L2_INPUT_TYPE_TUNER; + for (n = 0; n < ARRAY_SIZE(tvnorms); n++) + i->std |= tvnorms[n].id; + return 0; + } case VIDIOC_G_INPUT: - { - int *i = arg; - *i = dev->ctl_input; - - return 0; - } + { + int *i = arg; + *i = dev->ctl_input; + return 0; + } case VIDIOC_S_INPUT: - { - int *index = arg; - - if (*index >= MAX_EM28XX_INPUT) - return -EINVAL; - if (0 == INPUT(*index)->type) - return -EINVAL; + { + int *index = arg; - down(&dev->lock); - video_mux(dev, *index); - up(&dev->lock); + if (*index >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(*index)->type) + return -EINVAL; - return 0; - } + mutex_lock(&dev->lock); + video_mux(dev, *index); + mutex_unlock(&dev->lock); + return 0; + } case VIDIOC_G_AUDIO: - { - struct v4l2_audio *a = arg; - unsigned int index = a->index; + { + struct v4l2_audio *a = arg; + unsigned int index = a->index; - if (a->index > 1) - return -EINVAL; - memset(a, 0, sizeof(*a)); - index = dev->ctl_ainput; + if (a->index > 1) + return -EINVAL; + memset(a, 0, sizeof(*a)); + index = dev->ctl_ainput; - if (index == 0) { - strcpy(a->name, "Television"); - } else { - strcpy(a->name, "Line In"); - } - a->capability = V4L2_AUDCAP_STEREO; - a->index = index; - return 0; + if (index == 0) { + strcpy(a->name, "Television"); + } else { + strcpy(a->name, "Line In"); } - + a->capability = V4L2_AUDCAP_STEREO; + a->index = index; + return 0; + } case VIDIOC_S_AUDIO: - { - struct v4l2_audio *a = arg; - if (a->index != dev->ctl_ainput) - return -EINVAL; + { + struct v4l2_audio *a = arg; - return 0; - } + if (a->index != dev->ctl_ainput) + return -EINVAL; - /* --- controls ---------------------------------------------- */ + return 0; + } + + /* --- controls ---------------------------------------------- */ case VIDIOC_QUERYCTRL: - { - struct v4l2_queryctrl *qc = arg; - int i, id=qc->id; - - memset(qc,0,sizeof(*qc)); - qc->id=id; - - if (!dev->has_msp34xx) { - for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { - if (qc->id && qc->id == em28xx_qctrl[i].id) { - memcpy(qc, &(em28xx_qctrl[i]), - sizeof(*qc)); - return 0; - } - } - } - if (dev->decoder == EM28XX_TVP5150) { - em28xx_i2c_call_clients(dev,cmd,qc); - if (qc->type) - return 0; - else - return -EINVAL; - } - for (i = 0; i < ARRAY_SIZE(saa711x_qctrl); i++) { - if (qc->id && qc->id == saa711x_qctrl[i].id) { - memcpy(qc, &(saa711x_qctrl[i]), - sizeof(*qc)); - return 0; - } - } + { + struct v4l2_queryctrl *qc = arg; + int i, id=qc->id; - return -EINVAL; - } + memset(qc,0,sizeof(*qc)); + qc->id=id; - case VIDIOC_G_CTRL: - { - struct v4l2_control *ctrl = arg; - int retval=-EINVAL; - - if (!dev->has_msp34xx) - retval=em28xx_get_ctrl(dev, ctrl); - if (retval==-EINVAL) { - if (dev->decoder == EM28XX_TVP5150) { - em28xx_i2c_call_clients(dev,cmd,arg); + if (!dev->has_msp34xx) { + for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { + if (qc->id && qc->id == em28xx_qctrl[i].id) { + memcpy(qc, &(em28xx_qctrl[i]), + sizeof(*qc)); return 0; } - - return saa711x_get_ctrl(dev, ctrl); - } else return retval; + } } + em28xx_i2c_call_clients(dev,cmd,qc); + if (qc->type) + return 0; + else + return -EINVAL; + } + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + int retval=-EINVAL; + if (!dev->has_msp34xx) + retval=em28xx_get_ctrl(dev, ctrl); + if (retval==-EINVAL) { + em28xx_i2c_call_clients(dev,cmd,arg); + return 0; + } else return retval; + } case VIDIOC_S_CTRL: - { - struct v4l2_control *ctrl = arg; - u8 i; - - if (!dev->has_msp34xx){ - for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { - if (ctrl->id == em28xx_qctrl[i].id) { - if (ctrl->value < - em28xx_qctrl[i].minimum - || ctrl->value > - em28xx_qctrl[i].maximum) - return -ERANGE; - return em28xx_set_ctrl(dev, ctrl); - } - } - } - - if (dev->decoder == EM28XX_TVP5150) { - em28xx_i2c_call_clients(dev,cmd,arg); - return 0; - } else if (!dev->has_msp34xx) { - for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { - if (ctrl->id == em28xx_qctrl[i].id) { - if (ctrl->value < - em28xx_qctrl[i].minimum - || ctrl->value > - em28xx_qctrl[i].maximum) - return -ERANGE; - return em28xx_set_ctrl(dev, ctrl); - } - } - for (i = 0; i < ARRAY_SIZE(saa711x_qctrl); i++) { - if (ctrl->id == saa711x_qctrl[i].id) { - if (ctrl->value < - saa711x_qctrl[i].minimum - || ctrl->value > - saa711x_qctrl[i].maximum) - return -ERANGE; - return saa711x_set_ctrl(dev, ctrl); - } + { + struct v4l2_control *ctrl = arg; + u8 i; + + if (!dev->has_msp34xx){ + for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { + if (ctrl->id == em28xx_qctrl[i].id) { + if (ctrl->value < + em28xx_qctrl[i].minimum + || ctrl->value > + em28xx_qctrl[i].maximum) + return -ERANGE; + return em28xx_set_ctrl(dev, ctrl); } } - - return -EINVAL; } - /* --- tuner ioctls ------------------------------------------ */ + em28xx_i2c_call_clients(dev,cmd,arg); + return 0; + } + /* --- tuner ioctls ------------------------------------------ */ case VIDIOC_G_TUNER: - { - struct v4l2_tuner *t = arg; - int status = 0; + { + struct v4l2_tuner *t = arg; + int status = 0; - if (0 != t->index) - return -EINVAL; + if (0 != t->index) + return -EINVAL; - memset(t, 0, sizeof(*t)); - strcpy(t->name, "Tuner"); - t->type = V4L2_TUNER_ANALOG_TV; - t->capability = V4L2_TUNER_CAP_NORM; - t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */ + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Tuner"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */ /* t->signal = 0xffff;*/ /* em28xx_i2c_call_clients(dev,VIDIOC_G_TUNER,t);*/ - /* No way to get signal strength? */ - down(&dev->lock); - em28xx_i2c_call_clients(dev, DECODER_GET_STATUS, - &status); - up(&dev->lock); - t->signal = - (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0; - - em28xx_videodbg("VIDIO_G_TUNER: signal=%x, afc=%x\n", t->signal, - t->afc); - return 0; - } + /* No way to get signal strength? */ + mutex_lock(&dev->lock); + em28xx_i2c_call_clients(dev, DECODER_GET_STATUS, + &status); + mutex_unlock(&dev->lock); + t->signal = + (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0; + + em28xx_videodbg("VIDIO_G_TUNER: signal=%x, afc=%x\n", t->signal, + t->afc); + return 0; + } case VIDIOC_S_TUNER: - { - struct v4l2_tuner *t = arg; - int status = 0; + { + struct v4l2_tuner *t = arg; + int status = 0; - if (0 != t->index) - return -EINVAL; - memset(t, 0, sizeof(*t)); - strcpy(t->name, "Tuner"); - t->type = V4L2_TUNER_ANALOG_TV; - t->capability = V4L2_TUNER_CAP_NORM; - t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */ + if (0 != t->index) + return -EINVAL; + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Tuner"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */ /* t->signal = 0xffff; */ - /* No way to get signal strength? */ - down(&dev->lock); - em28xx_i2c_call_clients(dev, DECODER_GET_STATUS, - &status); - up(&dev->lock); - t->signal = - (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0; - - em28xx_videodbg("VIDIO_S_TUNER: signal=%x, afc=%x\n", - t->signal, t->afc); - return 0; - } + /* No way to get signal strength? */ + mutex_lock(&dev->lock); + em28xx_i2c_call_clients(dev, DECODER_GET_STATUS, + &status); + mutex_unlock(&dev->lock); + t->signal = + (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0; + + em28xx_videodbg("VIDIO_S_TUNER: signal=%x, afc=%x\n", + t->signal, t->afc); + return 0; + } case VIDIOC_G_FREQUENCY: - { - struct v4l2_frequency *f = arg; + { + struct v4l2_frequency *f = arg; - memset(f, 0, sizeof(*f)); - f->type = V4L2_TUNER_ANALOG_TV; - f->frequency = dev->ctl_freq; + memset(f, 0, sizeof(*f)); + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = dev->ctl_freq; - return 0; - } + return 0; + } case VIDIOC_S_FREQUENCY: - { - struct v4l2_frequency *f = arg; - - if (0 != f->tuner) - return -EINVAL; + { + struct v4l2_frequency *f = arg; - if (V4L2_TUNER_ANALOG_TV != f->type) - return -EINVAL; + if (0 != f->tuner) + return -EINVAL; - down(&dev->lock); - dev->ctl_freq = f->frequency; - em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f); - up(&dev->lock); - return 0; - } + if (V4L2_TUNER_ANALOG_TV != f->type) + return -EINVAL; + mutex_lock(&dev->lock); + dev->ctl_freq = f->frequency; + em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f); + mutex_unlock(&dev->lock); + return 0; + } case VIDIOC_CROPCAP: - { - struct v4l2_cropcap *cc = arg; + { + struct v4l2_cropcap *cc = arg; - if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - cc->bounds.left = 0; - cc->bounds.top = 0; - cc->bounds.width = dev->width; - cc->bounds.height = dev->height; - cc->defrect = cc->bounds; - cc->pixelaspect.numerator = 54; /* 4:3 FIXME: remove magic numbers */ - cc->pixelaspect.denominator = 59; - return 0; - } + if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + cc->bounds.left = 0; + cc->bounds.top = 0; + cc->bounds.width = dev->width; + cc->bounds.height = dev->height; + cc->defrect = cc->bounds; + cc->pixelaspect.numerator = 54; /* 4:3 FIXME: remove magic numbers */ + cc->pixelaspect.denominator = 59; + return 0; + } case VIDIOC_STREAMON: - { - int *type = arg; + { + int *type = arg; - if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE - || dev->io != IO_MMAP) - return -EINVAL; + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE + || dev->io != IO_MMAP) + return -EINVAL; - if (list_empty(&dev->inqueue)) - return -EINVAL; + if (list_empty(&dev->inqueue)) + return -EINVAL; - dev->stream = STREAM_ON; /* FIXME: Start video capture here? */ + dev->stream = STREAM_ON; /* FIXME: Start video capture here? */ - em28xx_videodbg("VIDIOC_STREAMON: starting stream\n"); + em28xx_videodbg("VIDIOC_STREAMON: starting stream\n"); - return 0; - } + return 0; + } case VIDIOC_STREAMOFF: - { - int *type = arg; - int ret; - - if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE - || dev->io != IO_MMAP) - return -EINVAL; + { + int *type = arg; + int ret; - if (dev->stream == STREAM_ON) { - em28xx_videodbg ("VIDIOC_STREAMOFF: interrupting stream\n"); - if ((ret = em28xx_stream_interrupt(dev))) - return ret; - } - em28xx_empty_framequeues(dev); + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE + || dev->io != IO_MMAP) + return -EINVAL; - return 0; + if (dev->stream == STREAM_ON) { + em28xx_videodbg ("VIDIOC_STREAMOFF: interrupting stream\n"); + if ((ret = em28xx_stream_interrupt(dev))) + return ret; } + em28xx_empty_framequeues(dev); + + return 0; + } default: return v4l_compat_translate_ioctl(inode, filp, cmd, arg, driver_ioctl); @@ -1283,327 +1295,170 @@ static int em28xx_video_do_ioctl(struct inode *inode, struct file *filp, /* --- capabilities ------------------------------------------ */ case VIDIOC_QUERYCAP: { - struct v4l2_capability *cap = arg; - - memset(cap, 0, sizeof(*cap)); - strlcpy(cap->driver, "em28xx", sizeof(cap->driver)); - strlcpy(cap->card, em28xx_boards[dev->model].name, - sizeof(cap->card)); - strlcpy(cap->bus_info, dev->udev->dev.bus_id, - sizeof(cap->bus_info)); - cap->version = EM28XX_VERSION_CODE; - cap->capabilities = - V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_AUDIO | - V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; - if (dev->has_tuner) - cap->capabilities |= V4L2_CAP_TUNER; - return 0; - } - - /* --- capture ioctls ---------------------------------------- */ + struct v4l2_capability *cap = arg; + + memset(cap, 0, sizeof(*cap)); + strlcpy(cap->driver, "em28xx", sizeof(cap->driver)); + strlcpy(cap->card, em28xx_boards[dev->model].name, + sizeof(cap->card)); + strlcpy(cap->bus_info, dev->udev->dev.bus_id, + sizeof(cap->bus_info)); + cap->version = EM28XX_VERSION_CODE; + cap->capabilities = + V4L2_CAP_SLICED_VBI_CAPTURE | + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_AUDIO | + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + if (dev->has_tuner) + cap->capabilities |= V4L2_CAP_TUNER; + return 0; + } + /* --- capture ioctls ---------------------------------------- */ case VIDIOC_ENUM_FMT: - { - struct v4l2_fmtdesc *fmtd = arg; - - if (fmtd->index != 0) - return -EINVAL; - memset(fmtd, 0, sizeof(*fmtd)); - fmtd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - strcpy(fmtd->description, "Packed YUY2"); - fmtd->pixelformat = V4L2_PIX_FMT_YUYV; - memset(fmtd->reserved, 0, sizeof(fmtd->reserved)); - return 0; - } + { + struct v4l2_fmtdesc *fmtd = arg; + if (fmtd->index != 0) + return -EINVAL; + memset(fmtd, 0, sizeof(*fmtd)); + fmtd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(fmtd->description, "Packed YUY2"); + fmtd->pixelformat = V4L2_PIX_FMT_YUYV; + memset(fmtd->reserved, 0, sizeof(fmtd->reserved)); + return 0; + } case VIDIOC_G_FMT: - { - struct v4l2_format *format = arg; - - em28xx_videodbg("VIDIOC_G_FMT: type=%s\n", - format->type == - V4L2_BUF_TYPE_VIDEO_CAPTURE ? - "V4L2_BUF_TYPE_VIDEO_CAPTURE" : format->type == - V4L2_BUF_TYPE_VBI_CAPTURE ? - "V4L2_BUF_TYPE_VBI_CAPTURE " : - "not supported"); - - if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - format->fmt.pix.width = dev->width; - format->fmt.pix.height = dev->height; - format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; - format->fmt.pix.bytesperline = dev->bytesperline; - format->fmt.pix.sizeimage = dev->frame_size; - format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - format->fmt.pix.field = dev->interlaced ? V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */ - - em28xx_videodbg("VIDIOC_G_FMT: %dx%d\n", dev->width, - dev->height); - return 0; - } + return em28xx_get_fmt(dev, (struct v4l2_format *) arg); case VIDIOC_TRY_FMT: case VIDIOC_S_FMT: - { - struct v4l2_format *format = arg; - u32 i; - int ret = 0; - int width = format->fmt.pix.width; - int height = format->fmt.pix.height; - unsigned int hscale, vscale; - unsigned int maxh, maxw; - - maxw = norm_maxw(dev); - maxh = norm_maxh(dev); - -/* int both_fields; */ - - em28xx_videodbg("%s: type=%s\n", - cmd == - VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" : - "VIDIOC_S_FMT", - format->type == - V4L2_BUF_TYPE_VIDEO_CAPTURE ? - "V4L2_BUF_TYPE_VIDEO_CAPTURE" : format->type == - V4L2_BUF_TYPE_VBI_CAPTURE ? - "V4L2_BUF_TYPE_VBI_CAPTURE " : - "not supported"); - - if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - em28xx_videodbg("%s: requested %dx%d\n", - cmd == - VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" : - "VIDIOC_S_FMT", format->fmt.pix.width, - format->fmt.pix.height); - - /* FIXME: Move some code away from here */ - /* width must even because of the YUYV format */ - /* height must be even because of interlacing */ - height &= 0xfffe; - width &= 0xfffe; - - if (height < 32) - height = 32; - if (height > maxh) - height = maxh; - if (width < 48) - width = 48; - if (width > maxw) - width = maxw; - - if(dev->is_em2800){ - /* the em2800 can only scale down to 50% */ - if(height % (maxh / 2)) - height=maxh; - if(width % (maxw / 2)) - width=maxw; - /* according to empiatech support */ - /* the MaxPacketSize is to small to support */ - /* framesizes larger than 640x480 @ 30 fps */ - /* or 640x576 @ 25 fps. As this would cut */ - /* of a part of the image we prefer */ - /* 360x576 or 360x480 for now */ - if(width == maxw && height == maxh) - width /= 2; - } - - if ((hscale = - (((unsigned long)maxw) << 12) / width - 4096L) >= - 0x4000) - hscale = 0x3fff; - width = - (((unsigned long)maxw) << 12) / (hscale + 4096L); - - if ((vscale = - (((unsigned long)maxh) << 12) / height - 4096L) >= - 0x4000) - vscale = 0x3fff; - height = - (((unsigned long)maxh) << 12) / (vscale + 4096L); - - format->fmt.pix.width = width; - format->fmt.pix.height = height; - format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; - format->fmt.pix.bytesperline = width * 2; - format->fmt.pix.sizeimage = width * 2 * height; - format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - format->fmt.pix.field = V4L2_FIELD_INTERLACED; - - em28xx_videodbg("%s: returned %dx%d (%d, %d)\n", - cmd == - VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" : - "VIDIOC_S_FMT", format->fmt.pix.width, - format->fmt.pix.height, hscale, vscale); - - if (cmd == VIDIOC_TRY_FMT) - return 0; - - for (i = 0; i < dev->num_frames; i++) - if (dev->frame[i].vma_use_count) { - em28xx_videodbg("VIDIOC_S_FMT failed. " - "Unmap the buffers first.\n"); - return -EINVAL; - } + return em28xx_set_fmt(dev, cmd, (struct v4l2_format *)arg); - /* stop io in case it is already in progress */ - if (dev->stream == STREAM_ON) { - em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n"); - if ((ret = em28xx_stream_interrupt(dev))) - return ret; - } + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *rb = arg; + u32 i; + int ret; - em28xx_release_buffers(dev); - dev->io = IO_NONE; - - /* set new image size */ - dev->width = width; - dev->height = height; - dev->frame_size = dev->width * dev->height * 2; - dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */ - dev->bytesperline = dev->width * 2; - dev->hscale = hscale; - dev->vscale = vscale; -/* dev->both_fileds = both_fileds; */ - em28xx_uninit_isoc(dev); - em28xx_set_alternate(dev); - em28xx_capture_start(dev, 1); - em28xx_resolution_set(dev); - em28xx_init_isoc(dev); + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; - return 0; + if (dev->io == IO_READ) { + em28xx_videodbg ("method is set to read;" + " close and open the device again to" + " choose the mmap I/O method\n"); + return -EINVAL; } - /* --- streaming capture ------------------------------------- */ - case VIDIOC_REQBUFS: - { - struct v4l2_requestbuffers *rb = arg; - u32 i; - int ret; - - if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - rb->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - - if (dev->io == IO_READ) { - em28xx_videodbg ("method is set to read;" - " close and open the device again to" - " choose the mmap I/O method\n"); + for (i = 0; i < dev->num_frames; i++) + if (dev->frame[i].vma_use_count) { + em28xx_videodbg ("VIDIOC_REQBUFS failed; previous buffers are still mapped\n"); return -EINVAL; } - for (i = 0; i < dev->num_frames; i++) - if (dev->frame[i].vma_use_count) { - em28xx_videodbg ("VIDIOC_REQBUFS failed; previous buffers are still mapped\n"); - return -EINVAL; - } - - if (dev->stream == STREAM_ON) { - em28xx_videodbg("VIDIOC_REQBUFS: interrupting stream\n"); - if ((ret = em28xx_stream_interrupt(dev))) - return ret; - } - - em28xx_empty_framequeues(dev); + if (dev->stream == STREAM_ON) { + em28xx_videodbg("VIDIOC_REQBUFS: interrupting stream\n"); + if ((ret = em28xx_stream_interrupt(dev))) + return ret; + } - em28xx_release_buffers(dev); - if (rb->count) - rb->count = - em28xx_request_buffers(dev, rb->count); + em28xx_empty_framequeues(dev); - dev->frame_current = NULL; + em28xx_release_buffers(dev); + if (rb->count) + rb->count = + em28xx_request_buffers(dev, rb->count); - em28xx_videodbg ("VIDIOC_REQBUFS: setting io method to mmap: num bufs %i\n", - rb->count); - dev->io = rb->count ? IO_MMAP : IO_NONE; - return 0; - } + dev->frame_current = NULL; + em28xx_videodbg ("VIDIOC_REQBUFS: setting io method to mmap: num bufs %i\n", + rb->count); + dev->io = rb->count ? IO_MMAP : IO_NONE; + return 0; + } case VIDIOC_QUERYBUF: - { - struct v4l2_buffer *b = arg; + { + struct v4l2_buffer *b = arg; - if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - b->index >= dev->num_frames || dev->io != IO_MMAP) - return -EINVAL; + if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b->index >= dev->num_frames || dev->io != IO_MMAP) + return -EINVAL; - memcpy(b, &dev->frame[b->index].buf, sizeof(*b)); + memcpy(b, &dev->frame[b->index].buf, sizeof(*b)); - if (dev->frame[b->index].vma_use_count) { - b->flags |= V4L2_BUF_FLAG_MAPPED; - } - if (dev->frame[b->index].state == F_DONE) - b->flags |= V4L2_BUF_FLAG_DONE; - else if (dev->frame[b->index].state != F_UNUSED) - b->flags |= V4L2_BUF_FLAG_QUEUED; - return 0; + if (dev->frame[b->index].vma_use_count) { + b->flags |= V4L2_BUF_FLAG_MAPPED; } + if (dev->frame[b->index].state == F_DONE) + b->flags |= V4L2_BUF_FLAG_DONE; + else if (dev->frame[b->index].state != F_UNUSED) + b->flags |= V4L2_BUF_FLAG_QUEUED; + return 0; + } case VIDIOC_QBUF: - { - struct v4l2_buffer *b = arg; - unsigned long lock_flags; + { + struct v4l2_buffer *b = arg; + unsigned long lock_flags; - if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || - b->index >= dev->num_frames || dev->io != IO_MMAP) { - return -EINVAL; - } + if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b->index >= dev->num_frames || dev->io != IO_MMAP) { + return -EINVAL; + } - if (dev->frame[b->index].state != F_UNUSED) { - return -EAGAIN; - } - dev->frame[b->index].state = F_QUEUED; + if (dev->frame[b->index].state != F_UNUSED) { + return -EAGAIN; + } + dev->frame[b->index].state = F_QUEUED; - /* add frame to fifo */ - spin_lock_irqsave(&dev->queue_lock, lock_flags); - list_add_tail(&dev->frame[b->index].frame, - &dev->inqueue); - spin_unlock_irqrestore(&dev->queue_lock, lock_flags); + /* add frame to fifo */ + spin_lock_irqsave(&dev->queue_lock, lock_flags); + list_add_tail(&dev->frame[b->index].frame, + &dev->inqueue); + spin_unlock_irqrestore(&dev->queue_lock, lock_flags); - return 0; - } + return 0; + } case VIDIOC_DQBUF: - { - struct v4l2_buffer *b = arg; - struct em28xx_frame_t *f; - unsigned long lock_flags; - int ret = 0; + { + struct v4l2_buffer *b = arg; + struct em28xx_frame_t *f; + unsigned long lock_flags; + int ret = 0; - if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE - || dev->io != IO_MMAP) - return -EINVAL; + if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE + || dev->io != IO_MMAP) + return -EINVAL; - if (list_empty(&dev->outqueue)) { - if (dev->stream == STREAM_OFF) - return -EINVAL; - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - ret = wait_event_interruptible - (dev->wait_frame, - (!list_empty(&dev->outqueue)) || - (dev->state & DEV_DISCONNECTED)); - if (ret) - return ret; - if (dev->state & DEV_DISCONNECTED) - return -ENODEV; - } + if (list_empty(&dev->outqueue)) { + if (dev->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + ret = wait_event_interruptible + (dev->wait_frame, + (!list_empty(&dev->outqueue)) || + (dev->state & DEV_DISCONNECTED)); + if (ret) + return ret; + if (dev->state & DEV_DISCONNECTED) + return -ENODEV; + } - spin_lock_irqsave(&dev->queue_lock, lock_flags); - f = list_entry(dev->outqueue.next, - struct em28xx_frame_t, frame); - list_del(dev->outqueue.next); - spin_unlock_irqrestore(&dev->queue_lock, lock_flags); + spin_lock_irqsave(&dev->queue_lock, lock_flags); + f = list_entry(dev->outqueue.next, + struct em28xx_frame_t, frame); + list_del(dev->outqueue.next); + spin_unlock_irqrestore(&dev->queue_lock, lock_flags); - f->state = F_UNUSED; - memcpy(b, &f->buf, sizeof(*b)); + f->state = F_UNUSED; + memcpy(b, &f->buf, sizeof(*b)); - if (f->vma_use_count) - b->flags |= V4L2_BUF_FLAG_MAPPED; + if (f->vma_use_count) + b->flags |= V4L2_BUF_FLAG_MAPPED; - return 0; - } + return 0; + } default: return em28xx_do_ioctl(inode, filp, dev, cmd, arg, em28xx_video_do_ioctl); @@ -1621,25 +1476,25 @@ static int em28xx_v4l2_ioctl(struct inode *inode, struct file *filp, int ret = 0; struct em28xx *dev = filp->private_data; - if (down_interruptible(&dev->fileop_lock)) + if (mutex_lock_interruptible(&dev->fileop_lock)) return -ERESTARTSYS; if (dev->state & DEV_DISCONNECTED) { em28xx_errdev("v4l2 ioctl: device not present\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -ENODEV; } if (dev->state & DEV_MISCONFIGURED) { em28xx_errdev ("v4l2 ioctl: device is misconfigured; close and open it again\n"); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return -EIO; } ret = video_usercopy(inode, filp, cmd, arg, em28xx_video_do_ioctl); - up(&dev->fileop_lock); + mutex_unlock(&dev->fileop_lock); return ret; } @@ -1673,7 +1528,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->udev = udev; dev->model = model; - init_MUTEX(&dev->lock); + mutex_init(&dev->lock); init_waitqueue_head(&dev->open); dev->em28xx_write_regs = em28xx_write_regs; @@ -1729,10 +1584,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->vpic.depth = 16; dev->vpic.palette = VIDEO_PALETTE_YUV422; + em28xx_pre_card_setup(dev); #ifdef CONFIG_MODULES /* request some modules */ if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114) - request_module("saa711x"); + request_module("saa7115"); if (dev->decoder == EM28XX_TVP5150) request_module("tvp5150"); if (dev->has_tuner) @@ -1744,10 +1600,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, if (errCode) { em28xx_errdev("error configuring device\n"); kfree(dev); + em28xx_devused&=~(1<<dev->devno); return -ENOMEM; } - down(&dev->lock); + mutex_lock(&dev->lock); /* register i2c bus */ em28xx_i2c_register(dev); @@ -1757,7 +1614,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, /* configure the device */ em28xx_config_i2c(dev); - up(&dev->lock); + mutex_unlock(&dev->lock); errCode = em28xx_config(dev); @@ -1770,9 +1627,30 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, if (NULL == dev->vdev) { em28xx_errdev("cannot allocate video_device.\n"); kfree(dev); + em28xx_devused&=~(1<<dev->devno); return -ENOMEM; } + dev->vbi_dev = video_device_alloc(); + if (NULL == dev->vbi_dev) { + em28xx_errdev("cannot allocate video_device.\n"); + kfree(dev->vdev); + kfree(dev); + em28xx_devused&=~(1<<dev->devno); + return -ENOMEM; + } + + /* Fills VBI device info */ + dev->vbi_dev->type = VFL_TYPE_VBI; + dev->vbi_dev->hardware = 0; + dev->vbi_dev->fops = &em28xx_v4l_fops; + dev->vbi_dev->minor = -1; + dev->vbi_dev->dev = &dev->udev->dev; + dev->vbi_dev->release = video_device_release; + snprintf(dev->vbi_dev->name, sizeof(dev->vbi_dev->name), "%s#%d %s", + "em28xx",dev->devno,"vbi"); + + /* Fills CAPTURE device info */ dev->vdev->type = VID_TYPE_CAPTURE; if (dev->has_tuner) dev->vdev->type |= VID_TYPE_TUNER; @@ -1781,21 +1659,39 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->vdev->minor = -1; dev->vdev->dev = &dev->udev->dev; dev->vdev->release = video_device_release; - snprintf(dev->vdev->name, sizeof(dev->vdev->name), "%s", - "em28xx video"); + snprintf(dev->vdev->name, sizeof(dev->vbi_dev->name), "%s#%d %s", + "em28xx",dev->devno,"video"); + list_add_tail(&dev->devlist,&em28xx_devlist); /* register v4l2 device */ - down(&dev->lock); - if ((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1))) { + mutex_lock(&dev->lock); + if ((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, + video_nr[dev->devno]))) { em28xx_errdev("unable to register video device (error=%i).\n", retval); - up(&dev->lock); + mutex_unlock(&dev->lock); list_del(&dev->devlist); video_device_release(dev->vdev); kfree(dev); + em28xx_devused&=~(1<<dev->devno); return -ENODEV; } + + if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI, + vbi_nr[dev->devno]) < 0) { + printk("unable to register vbi device\n"); + mutex_unlock(&dev->lock); + list_del(&dev->devlist); + video_device_release(dev->vbi_dev); + video_device_release(dev->vdev); + kfree(dev); + em28xx_devused&=~(1<<dev->devno); + return -ENODEV; + } else { + printk("registered VBI\n"); + } + if (dev->has_msp34xx) { /* Send a reset to other chips via gpio */ em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1); @@ -1806,10 +1702,11 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, } video_mux(dev, 0); - up(&dev->lock); + mutex_unlock(&dev->lock); - em28xx_info("V4L2 device registered as /dev/video%d\n", - dev->vdev->minor); + em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", + dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, + dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); return 0; } @@ -1831,6 +1728,9 @@ static int em28xx_usb_probe(struct usb_interface *interface, udev = usb_get_dev(interface_to_usbdev(interface)); ifnum = interface->altsetting[0].desc.bInterfaceNumber; + /* Check to see next free device and mark as used */ + nr=find_first_zero_bit(&em28xx_devused,EM28XX_MAXBOARDS); + em28xx_devused|=1<<nr; /* Don't register audio interfaces */ if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { @@ -1838,6 +1738,8 @@ static int em28xx_usb_probe(struct usb_interface *interface, udev->descriptor.idVendor,udev->descriptor.idProduct, ifnum, interface->altsetting[0].desc.bInterfaceClass); + + em28xx_devused&=~(1<<nr); return -ENODEV; } @@ -1852,18 +1754,20 @@ static int em28xx_usb_probe(struct usb_interface *interface, if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) { em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); + em28xx_devused&=~(1<<nr); return -ENODEV; } if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n"); + em28xx_devused&=~(1<<nr); return -ENODEV; } model=id->driver_info; - nr=interface->minor; - if (nr>EM28XX_MAXBOARDS) { + if (nr >= EM28XX_MAXBOARDS) { printk (DRIVER_NAME ": Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS); + em28xx_devused&=~(1<<nr); return -ENOMEM; } @@ -1871,19 +1775,24 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { em28xx_err(DRIVER_NAME ": out of memory!\n"); + em28xx_devused&=~(1<<nr); return -ENOMEM; } + snprintf(dev->name, 29, "em28xx #%d", nr); + dev->devno=nr; + /* compute alternate max packet sizes */ uif = udev->actconfig->interface[0]; dev->num_alt=uif->num_altsetting; - printk(DRIVER_NAME ": Alternate settings: %i\n",dev->num_alt); + em28xx_info("Alternate settings: %i\n",dev->num_alt); // dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* dev->alt_max_pkt_size = kmalloc(32* dev->num_alt,GFP_KERNEL); if (dev->alt_max_pkt_size == NULL) { - em28xx_err(DRIVER_NAME ": out of memory!\n"); + em28xx_errdev("out of memory!\n"); + em28xx_devused&=~(1<<nr); return -ENOMEM; } @@ -1892,27 +1801,26 @@ static int em28xx_usb_probe(struct usb_interface *interface, wMaxPacketSize); dev->alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); - printk(DRIVER_NAME ": Alternate setting %i, max size= %i\n",i, + em28xx_info("Alternate setting %i, max size= %i\n",i, dev->alt_max_pkt_size[i]); } - snprintf(dev->name, 29, "em28xx #%d", nr); - if ((card[nr]>=0)&&(card[nr]<em28xx_bcount)) model=card[nr]; if ((model==EM2800_BOARD_UNKNOWN)||(model==EM2820_BOARD_UNKNOWN)) { - printk( "%s: Your board has no eeprom inside it and thus can't\n" + em28xx_errdev( "Your board has no eeprom inside it and thus can't\n" "%s: be autodetected. Please pass card=<n> insmod option to\n" "%s: workaround that. Redirect complaints to the vendor of\n" - "%s: the TV card. Best regards,\n" + "%s: the TV card. Generic type will be used." + "%s: Best regards,\n" "%s: -- tux\n", dev->name,dev->name,dev->name,dev->name,dev->name); - printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n", + em28xx_errdev("%s: Here is a list of valid choices for the card=<n> insmod option:\n", dev->name); for (i = 0; i < em28xx_bcount; i++) { - printk("%s: card=%d -> %s\n", - dev->name, i, em28xx_boards[i].name); + em28xx_errdev(" card=%d -> %s\n", i, + em28xx_boards[i].name); } } @@ -1938,15 +1846,12 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) struct em28xx *dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); -/*FIXME: IR should be disconnected */ - if (!dev) return; - down_write(&em28xx_disconnect); - down(&dev->lock); + mutex_lock(&dev->lock); em28xx_info("disconnecting %s\n", dev->vdev->name); @@ -1955,7 +1860,9 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) if (dev->users) { em28xx_warn ("device /dev/video%d is open! Deregistration and memory " - "deallocation are deferred on close.\n", dev->vdev->minor); + "deallocation are deferred on close.\n", + dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN); + dev->state |= DEV_MISCONFIGURED; em28xx_uninit_isoc(dev); dev->state |= DEV_DISCONNECTED; @@ -1966,7 +1873,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) em28xx_release_resources(dev); } - up(&dev->lock); + mutex_unlock(&dev->lock); if (!dev->users) { kfree(dev->alt_max_pkt_size); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 33de9d846af5..e1ddc2f27a21 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -27,6 +27,7 @@ #include <linux/videodev.h> #include <linux/i2c.h> +#include <linux/mutex.h> #include <media/ir-kbd-i2c.h> /* Boards supported by driver */ @@ -41,6 +42,10 @@ #define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 #define EM2800_BOARD_KWORLD_USB2800 8 #define EM2820_BOARD_PINNACLE_DVC_90 9 +#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10 +#define EM2880_BOARD_TERRATEC_HYBRID_XS 11 +#define EM2820_BOARD_KWORLD_PVRTV2800RF 12 +#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13 #define UNSET -1 @@ -209,6 +214,7 @@ struct em28xx { /* generic device properties */ char name[30]; /* name (including minor) of the device */ int model; /* index in the device_data struct */ + int devno; /* marks the number of this device */ unsigned int is_em2800; int video_inputs; /* number of video inputs */ struct list_head devlist; @@ -256,7 +262,7 @@ struct em28xx { enum em28xx_stream_state stream; enum em28xx_io_method io; /* locks */ - struct semaphore lock, fileop_lock; + struct mutex lock, fileop_lock; spinlock_t queue_lock; struct list_head inqueue, outqueue; wait_queue_head_t open, wait_frame, wait_stream; @@ -326,6 +332,7 @@ int em28xx_set_alternate(struct em28xx *dev); /* Provided by em28xx-cards.c */ extern int em2800_variant_detect(struct usb_device* udev,int model); +extern void em28xx_pre_card_setup(struct em28xx *dev); extern void em28xx_card_setup(struct em28xx *dev); extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; diff --git a/drivers/media/video/et61x251/Makefile b/drivers/media/video/et61x251/Makefile new file mode 100644 index 000000000000..2ff4db9ec882 --- /dev/null +++ b/drivers/media/video/et61x251/Makefile @@ -0,0 +1,4 @@ +et61x251-objs := et61x251_core.o et61x251_tas5130d1b.o + +obj-$(CONFIG_USB_ET61X251) += et61x251.o + diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h new file mode 100644 index 000000000000..2e5ca4032489 --- /dev/null +++ b/drivers/media/video/et61x251/et61x251.h @@ -0,0 +1,234 @@ +/*************************************************************************** + * V4L2 driver for ET61X[12]51 PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ET61X251_H_ +#define _ET61X251_H_ + +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/wait.h> +#include <linux/types.h> +#include <linux/param.h> +#include <linux/rwsem.h> +#include <linux/mutex.h> +#include <linux/stddef.h> +#include <linux/string.h> + +#include "et61x251_sensor.h" + +/*****************************************************************************/ + +#define ET61X251_DEBUG +#define ET61X251_DEBUG_LEVEL 2 +#define ET61X251_MAX_DEVICES 64 +#define ET61X251_PRESERVE_IMGSCALE 0 +#define ET61X251_FORCE_MUNMAP 0 +#define ET61X251_MAX_FRAMES 32 +#define ET61X251_COMPRESSION_QUALITY 0 +#define ET61X251_URBS 2 +#define ET61X251_ISO_PACKETS 7 +#define ET61X251_ALTERNATE_SETTING 13 +#define ET61X251_URB_TIMEOUT msecs_to_jiffies(2 * ET61X251_ISO_PACKETS) +#define ET61X251_CTRL_TIMEOUT 100 +#define ET61X251_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +static const struct usb_device_id et61x251_id_table[] = { + { USB_DEVICE(0x102c, 0x6151), }, + { USB_DEVICE(0x102c, 0x6251), }, + { USB_DEVICE(0x102c, 0x6253), }, + { USB_DEVICE(0x102c, 0x6254), }, + { USB_DEVICE(0x102c, 0x6255), }, + { USB_DEVICE(0x102c, 0x6256), }, + { USB_DEVICE(0x102c, 0x6257), }, + { USB_DEVICE(0x102c, 0x6258), }, + { USB_DEVICE(0x102c, 0x6259), }, + { USB_DEVICE(0x102c, 0x625a), }, + { USB_DEVICE(0x102c, 0x625b), }, + { USB_DEVICE(0x102c, 0x625c), }, + { USB_DEVICE(0x102c, 0x625d), }, + { USB_DEVICE(0x102c, 0x625e), }, + { USB_DEVICE(0x102c, 0x625f), }, + { USB_DEVICE(0x102c, 0x6260), }, + { USB_DEVICE(0x102c, 0x6261), }, + { USB_DEVICE(0x102c, 0x6262), }, + { USB_DEVICE(0x102c, 0x6263), }, + { USB_DEVICE(0x102c, 0x6264), }, + { USB_DEVICE(0x102c, 0x6265), }, + { USB_DEVICE(0x102c, 0x6266), }, + { USB_DEVICE(0x102c, 0x6267), }, + { USB_DEVICE(0x102c, 0x6268), }, + { USB_DEVICE(0x102c, 0x6269), }, + { } +}; + +ET61X251_SENSOR_TABLE + +/*****************************************************************************/ + +enum et61x251_frame_state { + F_UNUSED, + F_QUEUED, + F_GRABBING, + F_DONE, + F_ERROR, +}; + +struct et61x251_frame_t { + void* bufmem; + struct v4l2_buffer buf; + enum et61x251_frame_state state; + struct list_head frame; + unsigned long vma_use_count; +}; + +enum et61x251_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +enum et61x251_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +enum et61x251_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON, +}; + +struct et61x251_sysfs_attr { + u8 reg, i2c_reg; +}; + +struct et61x251_module_param { + u8 force_munmap; + u16 frame_timeout; +}; + +static DEFINE_MUTEX(et61x251_sysfs_lock); +static DECLARE_RWSEM(et61x251_disconnect); + +struct et61x251_device { + struct video_device* v4ldev; + + struct et61x251_sensor sensor; + + struct usb_device* usbdev; + struct urb* urb[ET61X251_URBS]; + void* transfer_buffer[ET61X251_URBS]; + u8* control_buffer; + + struct et61x251_frame_t *frame_current, frame[ET61X251_MAX_FRAMES]; + struct list_head inqueue, outqueue; + u32 frame_count, nbuffers, nreadbuffers; + + enum et61x251_io_method io; + enum et61x251_stream_state stream; + + struct v4l2_jpegcompression compression; + + struct et61x251_sysfs_attr sysfs; + struct et61x251_module_param module_param; + + enum et61x251_dev_state state; + u8 users; + + struct mutex dev_mutex, fileop_mutex; + spinlock_t queue_lock; + wait_queue_head_t open, wait_frame, wait_stream; +}; + +/*****************************************************************************/ + +struct et61x251_device* +et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id) +{ + if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id)) + return cam; + + return NULL; +} + + +void +et61x251_attach_sensor(struct et61x251_device* cam, + struct et61x251_sensor* sensor) +{ + memcpy(&cam->sensor, sensor, sizeof(struct et61x251_sensor)); +} + +/*****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef ET61X251_DEBUG +# define DBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1) \ + dev_err(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) == 2) \ + dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) >= 3) \ + dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} while (0) +# define KDBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1 || (level) == 2) \ + pr_info("et61x251: " fmt "\n", ## args); \ + else if ((level) == 3) \ + pr_debug("et61x251: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} while (0) +# define V4LDBG(level, name, cmd) \ +do { \ + if (debug >= (level)) \ + v4l_print_ioctl(name, cmd); \ +} while (0) +#else +# define DBG(level, fmt, args...) do {;} while(0) +# define KDBG(level, fmt, args...) do {;} while(0) +# define V4LDBG(level, name, cmd) do {;} while(0) +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args) + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */ + +#endif /* _ET61X251_H_ */ diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c new file mode 100644 index 000000000000..dfc9dd732c9d --- /dev/null +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -0,0 +1,2630 @@ +/*************************************************************************** + * V4L2 driver for ET61X[12]51 PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/poll.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/page-flags.h> +#include <linux/byteorder/generic.h> +#include <asm/page.h> +#include <asm/uaccess.h> + +#include "et61x251.h" + +/*****************************************************************************/ + +#define ET61X251_MODULE_NAME "V4L2 driver for ET61X[12]51 " \ + "PC Camera Controllers" +#define ET61X251_MODULE_AUTHOR "(C) 2006 Luca Risolia" +#define ET61X251_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define ET61X251_MODULE_LICENSE "GPL" +#define ET61X251_MODULE_VERSION "1:1.02" +#define ET61X251_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 2) + +/*****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, et61x251_id_table); + +MODULE_AUTHOR(ET61X251_MODULE_AUTHOR " " ET61X251_AUTHOR_EMAIL); +MODULE_DESCRIPTION(ET61X251_MODULE_NAME); +MODULE_VERSION(ET61X251_MODULE_VERSION); +MODULE_LICENSE(ET61X251_MODULE_LICENSE); + +static short video_nr[] = {[0 ... ET61X251_MAX_DEVICES-1] = -1}; +module_param_array(video_nr, short, NULL, 0444); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L2 minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to " + __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second registered camera and use auto for the first" + "\none and for every other camera." + "\n"); + +static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] = + ET61X251_FORCE_MUNMAP}; +module_param_array(force_munmap, bool, NULL, 0444); +MODULE_PARM_DESC(force_munmap, + "\n<0|1[,...]> Force the application to unmap previously" + "\nmapped buffer memory before calling any VIDIOC_S_CROP or" + "\nVIDIOC_S_FMT ioctl's. Not all the applications support" + "\nthis feature. This parameter is specific for each" + "\ndetected camera." + "\n 0 = do not force memory unmapping" + "\n 1 = force memory unmapping (save memory)" + "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"." + "\n"); + +static unsigned int frame_timeout[] = {[0 ... ET61X251_MAX_DEVICES-1] = + ET61X251_FRAME_TIMEOUT}; +module_param_array(frame_timeout, uint, NULL, 0644); +MODULE_PARM_DESC(frame_timeout, + "\n<n[,...]> Timeout for a video frame in seconds." + "\nThis parameter is specific for each detected camera." + "\nDefault value is " + __MODULE_STRING(ET61X251_FRAME_TIMEOUT)"." + "\n"); + +#ifdef ET61X251_DEBUG +static unsigned short debug = ET61X251_DEBUG_LEVEL; +module_param(debug, ushort, 0644); +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 3:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = more verbose messages" + "\nLevel 3 is useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"." + "\n"); +#endif + +/*****************************************************************************/ + +static u32 +et61x251_request_buffers(struct et61x251_device* cam, u32 count, + enum et61x251_io_method io) +{ + struct v4l2_pix_format* p = &(cam->sensor.pix_format); + struct v4l2_rect* r = &(cam->sensor.cropcap.bounds); + const size_t imagesize = cam->module_param.force_munmap || + io == IO_READ ? + (p->width * p->height * p->priv) / 8 : + (r->width * r->height * p->priv) / 8; + void* buff = NULL; + u32 i; + + if (count > ET61X251_MAX_FRAMES) + count = ET61X251_MAX_FRAMES; + + cam->nbuffers = count; + while (cam->nbuffers > 0) { + if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize)))) + break; + cam->nbuffers--; + } + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.index = i; + cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.length = imagesize; + cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cam->frame[i].buf.sequence = 0; + cam->frame[i].buf.field = V4L2_FIELD_NONE; + cam->frame[i].buf.memory = V4L2_MEMORY_MMAP; + cam->frame[i].buf.flags = 0; + } + + return cam->nbuffers; +} + + +static void et61x251_release_buffers(struct et61x251_device* cam) +{ + if (cam->nbuffers) { + vfree(cam->frame[0].bufmem); + cam->nbuffers = 0; + } + cam->frame_current = NULL; +} + + +static void et61x251_empty_framequeues(struct et61x251_device* cam) +{ + u32 i; + + INIT_LIST_HEAD(&cam->inqueue); + INIT_LIST_HEAD(&cam->outqueue); + + for (i = 0; i < ET61X251_MAX_FRAMES; i++) { + cam->frame[i].state = F_UNUSED; + cam->frame[i].buf.bytesused = 0; + } +} + + +static void et61x251_requeue_outqueue(struct et61x251_device* cam) +{ + struct et61x251_frame_t *i; + + list_for_each_entry(i, &cam->outqueue, frame) { + i->state = F_QUEUED; + list_add(&i->frame, &cam->inqueue); + } + + INIT_LIST_HEAD(&cam->outqueue); +} + + +static void et61x251_queue_unusedframes(struct et61x251_device* cam) +{ + unsigned long lock_flags; + u32 i; + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].state == F_UNUSED) { + cam->frame[i].state = F_QUEUED; + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[i].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + } +} + +/*****************************************************************************/ + +int et61x251_write_reg(struct et61x251_device* cam, u8 value, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + *buff = value; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, index, buff, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) { + DBG(3, "Failed to write a register (value 0x%02X, index " + "0x%02X, error %d)", value, index, res); + return -1; + } + + return 0; +} + + +int et61x251_read_reg(struct et61x251_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + 0, index, buff, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + DBG(3, "Failed to read a register (index 0x%02X, error %d)", + index, res); + + return (res >= 0) ? (int)(*buff) : -1; +} + + +static int +et61x251_i2c_wait(struct et61x251_device* cam, struct et61x251_sensor* sensor) +{ + int i, r; + + for (i = 1; i <= 8; i++) { + if (sensor->interface == ET61X251_I2C_3WIRES) { + r = et61x251_read_reg(cam, 0x8e); + if (!(r & 0x02) && (r >= 0)) + return 0; + } else { + r = et61x251_read_reg(cam, 0x8b); + if (!(r & 0x01) && (r >= 0)) + return 0; + } + if (r < 0) + return -EIO; + udelay(8*8); /* minimum for sensors at 400kHz */ + } + + return -EBUSY; +} + + +int +et61x251_i2c_try_read(struct et61x251_device* cam, + struct et61x251_sensor* sensor, u8 address) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x10; + data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02); + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, sensor); + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + if (err) + DBG(3, "I2C read failed for %s image sensor", sensor->name); + + PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]); + + return err ? -1 : (int)data[0]; +} + + +int +et61x251_i2c_try_write(struct et61x251_device* cam, + struct et61x251_sensor* sensor, u8 address, u8 value) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x12; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + data[0] = value; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, sensor); + + if (err) + DBG(3, "I2C write failed for %s image sensor", sensor->name); + + PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value); + + return err ? -1 : 0; +} + + +int +et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2, + u8 data3, u8 data4, u8 data5, u8 data6, u8 data7, + u8 data8, u8 address) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = data2; + data[1] = data3; + data[2] = data4; + data[3] = data5; + data[4] = data6; + data[5] = data7; + data[6] = data8; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x02 | (n << 4); + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + /* Start writing through the serial interface */ + data[0] = data1; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, &cam->sensor); + + if (err) + DBG(3, "I2C raw write failed for %s image sensor", + cam->sensor.name); + + PDBGG("I2C raw write: %u bytes, address = 0x%02X, data1 = 0x%02X, " + "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X," + " data6 = 0x%02X, data7 = 0x%02X, data8 = 0x%02X", n, address, + data1, data2, data3, data4, data5, data6, data7, data8); + + return err ? -1 : 0; + +} + + +int et61x251_i2c_read(struct et61x251_device* cam, u8 address) +{ + return et61x251_i2c_try_read(cam, &cam->sensor, address); +} + + +int et61x251_i2c_write(struct et61x251_device* cam, u8 address, u8 value) +{ + return et61x251_i2c_try_write(cam, &cam->sensor, address, value); +} + +/*****************************************************************************/ + +static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs) +{ + struct et61x251_device* cam = urb->context; + struct et61x251_frame_t** f; + size_t imagesize; + u8 i; + int err = 0; + + if (urb->status == -ENOENT) + return; + + f = &cam->frame_current; + + if (cam->stream == STREAM_INTERRUPT) { + cam->stream = STREAM_OFF; + if ((*f)) + (*f)->state = F_QUEUED; + DBG(3, "Stream interrupted"); + wake_up(&cam->wait_stream); + } + + if (cam->state & DEV_DISCONNECTED) + return; + + if (cam->state & DEV_MISCONFIGURED) { + wake_up_interruptible(&cam->wait_frame); + return; + } + + if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue)) + goto resubmit_urb; + + if (!(*f)) + (*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t, + frame); + + imagesize = (cam->sensor.pix_format.width * + cam->sensor.pix_format.height * + cam->sensor.pix_format.priv) / 8; + + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int len, status; + void *pos; + u8* b1, * b2, sof; + const u8 VOID_BYTES = 6; + size_t imglen; + + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status) { + DBG(3, "Error in isochronous frame"); + (*f)->state = F_ERROR; + continue; + } + + b1 = pos++; + b2 = pos++; + sof = ((*b1 & 0x3f) == 63); + imglen = ((*b1 & 0xc0) << 2) | *b2; + + PDBGG("Isochrnous frame: length %u, #%u i, image length %zu", + len, i, imglen); + + if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) +start_of_frame: + if (sof) { + (*f)->state = F_GRABBING; + (*f)->buf.bytesused = 0; + do_gettimeofday(&(*f)->buf.timestamp); + pos += 22; + DBG(3, "SOF detected: new video frame"); + } + + if ((*f)->state == F_GRABBING) { + if (sof && (*f)->buf.bytesused) { + if (cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_ET61X251) + goto end_of_frame; + else { + DBG(3, "Not expected SOF detected " + "after %lu bytes", + (unsigned long)(*f)->buf.bytesused); + (*f)->state = F_ERROR; + continue; + } + } + + if ((*f)->buf.bytesused + imglen > imagesize) { + DBG(3, "Video frame size exceeded"); + (*f)->state = F_ERROR; + continue; + } + + pos += VOID_BYTES; + + memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, imglen); + (*f)->buf.bytesused += imglen; + + if ((*f)->buf.bytesused == imagesize) { + u32 b; +end_of_frame: + b = (*f)->buf.bytesused; + (*f)->state = F_DONE; + (*f)->buf.sequence= ++cam->frame_count; + spin_lock(&cam->queue_lock); + list_move_tail(&(*f)->frame, &cam->outqueue); + if (!list_empty(&cam->inqueue)) + (*f) = list_entry(cam->inqueue.next, + struct et61x251_frame_t, + frame); + else + (*f) = NULL; + spin_unlock(&cam->queue_lock); + DBG(3, "Video frame captured: : %lu bytes", + (unsigned long)(b)); + + if (!(*f)) + goto resubmit_urb; + + if (sof && + cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_ET61X251) + goto start_of_frame; + } + } + } + +resubmit_urb: + urb->dev = cam->usbdev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0 && err != -EPERM) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "usb_submit_urb() failed"); + } + + wake_up_interruptible(&cam->wait_frame); +} + + +static int et61x251_start_transfer(struct et61x251_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832, + 864, 896, 920, 956, 980, 1000, + 1022}; + const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING]; + s8 i, j; + int err = 0; + + for (i = 0; i < ET61X251_URBS; i++) { + cam->transfer_buffer[i] = kzalloc(ET61X251_ISO_PACKETS * psz, + GFP_KERNEL); + if (!cam->transfer_buffer[i]) { + err = -ENOMEM; + DBG(1, "Not enough memory"); + goto free_buffers; + } + } + + for (i = 0; i < ET61X251_URBS; i++) { + urb = usb_alloc_urb(ET61X251_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + err = -ENOMEM; + DBG(1, "usb_alloc_urb() failed"); + goto free_urbs; + } + urb->dev = udev; + urb->context = cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = ET61X251_ISO_PACKETS; + urb->complete = et61x251_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = psz * ET61X251_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < ET61X251_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = psz * j; + urb->iso_frame_desc[j].length = psz; + } + } + + err = et61x251_write_reg(cam, 0x01, 0x03); + err = et61x251_write_reg(cam, 0x00, 0x03); + err = et61x251_write_reg(cam, 0x08, 0x03); + if (err) { + err = -EIO; + DBG(1, "I/O hardware error"); + goto free_urbs; + } + + err = usb_set_interface(udev, 0, ET61X251_ALTERNATE_SETTING); + if (err) { + DBG(1, "usb_set_interface() failed"); + goto free_urbs; + } + + cam->frame_current = NULL; + + for (i = 0; i < ET61X251_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + for (j = i-1; j >= 0; j--) + usb_kill_urb(cam->urb[j]); + DBG(1, "usb_submit_urb() failed, error %d", err); + goto free_urbs; + } + } + + return 0; + +free_urbs: + for (i = 0; (i < ET61X251_URBS) && cam->urb[i]; i++) + usb_free_urb(cam->urb[i]); + +free_buffers: + for (i = 0; (i < ET61X251_URBS) && cam->transfer_buffer[i]; i++) + kfree(cam->transfer_buffer[i]); + + return err; +} + + +static int et61x251_stop_transfer(struct et61x251_device* cam) +{ + struct usb_device *udev = cam->usbdev; + s8 i; + int err = 0; + + if (cam->state & DEV_DISCONNECTED) + return 0; + + for (i = ET61X251_URBS-1; i >= 0; i--) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + kfree(cam->transfer_buffer[i]); + } + + err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + if (err) + DBG(3, "usb_set_interface() failed"); + + return err; +} + + +static int et61x251_stream_interrupt(struct et61x251_device* cam) +{ + long timeout; + + cam->stream = STREAM_INTERRUPT; + timeout = wait_event_timeout(cam->wait_stream, + (cam->stream == STREAM_OFF) || + (cam->state & DEV_DISCONNECTED), + ET61X251_URB_TIMEOUT); + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + else if (cam->stream != STREAM_OFF) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "URB timeout reached. The camera is misconfigured. To " + "use it, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + return 0; +} + +/*****************************************************************************/ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count) +{ + char str[5]; + char* endp; + unsigned long val; + + if (len < 4) { + strncpy(str, buff, len); + str[len+1] = '\0'; + } else { + strncpy(str, buff, 4); + str[4] = '\0'; + } + + val = simple_strtoul(str, &endp, 0); + + *count = 0; + if (val <= 0xff) + *count = (ssize_t)(endp - str); + if ((*count) && (len == *count+1) && (buff[*count] == '\n')) + *count += 1; + + return (u8)val; +} + +/* + NOTE 1: being inside one of the following methods implies that the v4l + device exists for sure (see kobjects and reference counters) + NOTE 2: buffers are PAGE_SIZE long +*/ + +static ssize_t et61x251_show_reg(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.reg); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + index = et61x251_strtou8(buf, len, &count); + if (index > 0x8e || !count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.reg = index; + + DBG(2, "Moved ET61X[12]51 register index to 0x%02X", cam->sysfs.reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t et61x251_show_val(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + if ((val = et61x251_read_reg(cam, cam->sysfs.reg)) < 0) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_val(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + value = et61x251_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + err = et61x251_write_reg(cam, value, cam->sysfs.reg); + if (err) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + DBG(2, "Written ET61X[12]51 reg. 0x%02X, val. 0x%02X", + cam->sysfs.reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + index = et61x251_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.i2c_reg = index; + + DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf) +{ + struct et61x251_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENOSYS; + } + + if ((val = et61x251_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static ssize_t +et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len) +{ + struct et61x251_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&et61x251_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & ET61X251_I2C_READ)) { + mutex_unlock(&et61x251_sysfs_lock); + return -ENOSYS; + } + + value = et61x251_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&et61x251_sysfs_lock); + return -EINVAL; + } + + err = et61x251_i2c_write(cam, cam->sysfs.i2c_reg, value); + if (err) { + mutex_unlock(&et61x251_sysfs_lock); + return -EIO; + } + + DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X", + cam->sysfs.i2c_reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&et61x251_sysfs_lock); + + return count; +} + + +static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR, + et61x251_show_reg, et61x251_store_reg); +static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR, + et61x251_show_val, et61x251_store_val); +static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR, + et61x251_show_i2c_reg, et61x251_store_i2c_reg); +static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR, + et61x251_show_i2c_val, et61x251_store_i2c_val); + + +static void et61x251_create_sysfs(struct et61x251_device* cam) +{ + struct video_device *v4ldev = cam->v4ldev; + + video_device_create_file(v4ldev, &class_device_attr_reg); + video_device_create_file(v4ldev, &class_device_attr_val); + if (cam->sensor.sysfs_ops) { + video_device_create_file(v4ldev, &class_device_attr_i2c_reg); + video_device_create_file(v4ldev, &class_device_attr_i2c_val); + } +} +#endif /* CONFIG_VIDEO_ADV_DEBUG */ + +/*****************************************************************************/ + +static int +et61x251_set_pix_format(struct et61x251_device* cam, + struct v4l2_pix_format* pix) +{ + int r, err = 0; + + if ((r = et61x251_read_reg(cam, 0x12)) < 0) + err += r; + if (pix->pixelformat == V4L2_PIX_FMT_ET61X251) + err += et61x251_write_reg(cam, r & 0xfd, 0x12); + else + err += et61x251_write_reg(cam, r | 0x02, 0x12); + + return err ? -EIO : 0; +} + + +static int +et61x251_set_compression(struct et61x251_device* cam, + struct v4l2_jpegcompression* compression) +{ + int r, err = 0; + + if ((r = et61x251_read_reg(cam, 0x12)) < 0) + err += r; + if (compression->quality == 0) + err += et61x251_write_reg(cam, r & 0xfb, 0x12); + else + err += et61x251_write_reg(cam, r | 0x04, 0x12); + + return err ? -EIO : 0; +} + + +static int et61x251_set_scale(struct et61x251_device* cam, u8 scale) +{ + int r = 0, err = 0; + + r = et61x251_read_reg(cam, 0x12); + if (r < 0) + err += r; + + if (scale == 1) + err += et61x251_write_reg(cam, r & ~0x01, 0x12); + else if (scale == 2) + err += et61x251_write_reg(cam, r | 0x01, 0x12); + + if (err) + return -EIO; + + PDBGG("Scaling factor: %u", scale); + + return 0; +} + + +static int +et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect) +{ + struct et61x251_sensor* s = &cam->sensor; + u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left + + s->active_pixel.left), + fmw_sy = (u16)(rect->top - s->cropcap.bounds.top + + s->active_pixel.top), + fmw_length = (u16)(rect->width), + fmw_height = (u16)(rect->height); + int err = 0; + + err += et61x251_write_reg(cam, fmw_sx & 0xff, 0x69); + err += et61x251_write_reg(cam, fmw_sy & 0xff, 0x6a); + err += et61x251_write_reg(cam, fmw_length & 0xff, 0x6b); + err += et61x251_write_reg(cam, fmw_height & 0xff, 0x6c); + err += et61x251_write_reg(cam, (fmw_sx >> 8) | ((fmw_sy & 0x300) >> 6) + | ((fmw_length & 0x300) >> 4) + | ((fmw_height & 0x300) >> 2), 0x6d); + if (err) + return -EIO; + + PDBGG("fmw_sx, fmw_sy, fmw_length, fmw_height: %u %u %u %u", + fmw_sx, fmw_sy, fmw_length, fmw_height); + + return 0; +} + + +static int et61x251_init(struct et61x251_device* cam) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + struct v4l2_queryctrl *qctrl; + struct v4l2_rect* rect; + u8 i = 0; + int err = 0; + + if (!(cam->state & DEV_INITIALIZED)) { + init_waitqueue_head(&cam->open); + qctrl = s->qctrl; + rect = &(s->cropcap.defrect); + cam->compression.quality = ET61X251_COMPRESSION_QUALITY; + } else { /* use current values */ + qctrl = s->_qctrl; + rect = &(s->_rect); + } + + err += et61x251_set_scale(cam, rect->width / s->pix_format.width); + err += et61x251_set_crop(cam, rect); + if (err) + return err; + + if (s->init) { + err = s->init(cam); + if (err) { + DBG(3, "Sensor initialization failed"); + return err; + } + } + + err += et61x251_set_compression(cam, &cam->compression); + err += et61x251_set_pix_format(cam, &s->pix_format); + if (s->set_pix_format) + err += s->set_pix_format(cam, &s->pix_format); + if (err) + return err; + + if (s->pix_format.pixelformat == V4L2_PIX_FMT_ET61X251) + DBG(3, "Compressed video format is active, quality %d", + cam->compression.quality); + else + DBG(3, "Uncompressed video format is active"); + + if (s->set_crop) + if ((err = s->set_crop(cam, rect))) { + DBG(3, "set_crop() failed"); + return err; + } + + if (s->set_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && + !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { + ctrl.id = s->qctrl[i].id; + ctrl.value = qctrl[i].default_value; + err = s->set_ctrl(cam, &ctrl); + if (err) { + DBG(3, "Set %s control failed", + s->qctrl[i].name); + return err; + } + DBG(3, "Image sensor supports '%s' control", + s->qctrl[i].name); + } + } + + if (!(cam->state & DEV_INITIALIZED)) { + mutex_init(&cam->fileop_mutex); + spin_lock_init(&cam->queue_lock); + init_waitqueue_head(&cam->wait_frame); + init_waitqueue_head(&cam->wait_stream); + cam->nreadbuffers = 2; + memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); + memcpy(&(s->_rect), &(s->cropcap.defrect), + sizeof(struct v4l2_rect)); + cam->state |= DEV_INITIALIZED; + } + + DBG(2, "Initialization succeeded"); + return 0; +} + + +static void et61x251_release_resources(struct et61x251_device* cam) +{ + mutex_lock(&et61x251_sysfs_lock); + + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + video_set_drvdata(cam->v4ldev, NULL); + video_unregister_device(cam->v4ldev); + + usb_put_dev(cam->usbdev); + + mutex_unlock(&et61x251_sysfs_lock); + + kfree(cam->control_buffer); +} + +/*****************************************************************************/ + +static int et61x251_open(struct inode* inode, struct file* filp) +{ + struct et61x251_device* cam; + int err = 0; + + /* + This is the only safe way to prevent race conditions with + disconnect + */ + if (!down_read_trylock(&et61x251_disconnect)) + return -ERESTARTSYS; + + cam = video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->dev_mutex)) { + up_read(&et61x251_disconnect); + return -ERESTARTSYS; + } + + if (cam->users) { + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + if ((filp->f_flags & O_NONBLOCK) || + (filp->f_flags & O_NDELAY)) { + err = -EWOULDBLOCK; + goto out; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->state & DEV_DISCONNECTED + || !cam->users); + if (err) { + up_read(&et61x251_disconnect); + return err; + } + if (cam->state & DEV_DISCONNECTED) { + up_read(&et61x251_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + + if (cam->state & DEV_MISCONFIGURED) { + err = et61x251_init(cam); + if (err) { + DBG(1, "Initialization failed again. " + "I will retry on next open()."); + goto out; + } + cam->state &= ~DEV_MISCONFIGURED; + } + + if ((err = et61x251_start_transfer(cam))) + goto out; + + filp->private_data = cam; + cam->users++; + cam->io = IO_NONE; + cam->stream = STREAM_OFF; + cam->nbuffers = 0; + cam->frame_count = 0; + et61x251_empty_framequeues(cam); + + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + +out: + mutex_unlock(&cam->dev_mutex); + up_read(&et61x251_disconnect); + return err; +} + + +static int et61x251_release(struct inode* inode, struct file* filp) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + et61x251_stop_transfer(cam); + + et61x251_release_buffers(cam); + + if (cam->state & DEV_DISCONNECTED) { + et61x251_release_resources(cam); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + wake_up_interruptible_nr(&cam->open, 1); + + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + + mutex_unlock(&cam->dev_mutex); + + return 0; +} + + +static ssize_t +et61x251_read(struct file* filp, char __user * buf, + size_t count, loff_t* f_pos) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_frame_t* f, * i; + unsigned long lock_flags; + long timeout; + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io == IO_MMAP) { + DBG(3, "Close and open the device again to choose the read " + "method"); + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + if (cam->io == IO_NONE) { + if (!et61x251_request_buffers(cam, cam->nreadbuffers, + IO_READ)) { + DBG(1, "read() failed, not enough memory"); + mutex_unlock(&cam->fileop_mutex); + return -ENOMEM; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (list_empty(&cam->inqueue)) { + if (!list_empty(&cam->outqueue)) + et61x251_empty_framequeues(cam); + et61x251_queue_unusedframes(cam); + } + + if (!count) { + mutex_unlock(&cam->fileop_mutex); + return 0; + } + + if (list_empty(&cam->outqueue)) { + if (filp->f_flags & O_NONBLOCK) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) { + mutex_unlock(&cam->fileop_mutex); + return timeout; + } + if (cam->state & DEV_DISCONNECTED) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + if (!timeout || (cam->state & DEV_MISCONFIGURED)) { + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + } + + f = list_entry(cam->outqueue.prev, struct et61x251_frame_t, frame); + + if (count > f->buf.bytesused) + count = f->buf.bytesused; + + if (copy_to_user(buf, f->bufmem, count)) { + err = -EFAULT; + goto exit; + } + *f_pos += count; + +exit: + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(i, &cam->outqueue, frame) + i->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + et61x251_queue_unusedframes(cam); + + PDBGG("Frame #%lu, bytes read: %zu", + (unsigned long)f->buf.index, count); + + mutex_unlock(&cam->fileop_mutex); + + return err ? err : count; +} + + +static unsigned int et61x251_poll(struct file *filp, poll_table *wait) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + struct et61x251_frame_t* f; + unsigned long lock_flags; + unsigned int mask = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return POLLERR; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + goto error; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + goto error; + } + + if (cam->io == IO_NONE) { + if (!et61x251_request_buffers(cam, cam->nreadbuffers, + IO_READ)) { + DBG(1, "poll() failed, not enough memory"); + goto error; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (cam->io == IO_READ) { + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(f, &cam->outqueue, frame) + f->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + et61x251_queue_unusedframes(cam); + } + + poll_wait(filp, &cam->wait_frame, wait); + + if (!list_empty(&cam->outqueue)) + mask |= POLLIN | POLLRDNORM; + + mutex_unlock(&cam->fileop_mutex); + + return mask; + +error: + mutex_unlock(&cam->fileop_mutex); + return POLLERR; +} + + +static void et61x251_vm_open(struct vm_area_struct* vma) +{ + struct et61x251_frame_t* f = vma->vm_private_data; + f->vma_use_count++; +} + + +static void et61x251_vm_close(struct vm_area_struct* vma) +{ + /* NOTE: buffers are not freed here */ + struct et61x251_frame_t* f = vma->vm_private_data; + f->vma_use_count--; +} + + +static struct vm_operations_struct et61x251_vm_ops = { + .open = et61x251_vm_open, + .close = et61x251_vm_close, +}; + + +static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(cam->frame[0].buf.length)) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) { + if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == cam->nbuffers) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; + + pos = cam->frame[i].bufmem; + while (size > 0) { /* size is page-aligned */ + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &et61x251_vm_ops; + vma->vm_private_data = &cam->frame[i]; + + et61x251_vm_open(vma); + + mutex_unlock(&cam->fileop_mutex); + + return 0; +} + +/*****************************************************************************/ + +static int +et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_capability cap = { + .driver = "et61x251", + .version = ET61X251_MODULE_VERSION_CODE, + .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING, + }; + + strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card)); + if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0) + strlcpy(cap.bus_info, cam->usbdev->dev.bus_id, + sizeof(cap.bus_info)); + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_input i; + + if (copy_from_user(&i, arg, sizeof(i))) + return -EFAULT; + + if (i.index) + return -EINVAL; + + memset(&i, 0, sizeof(i)); + strcpy(i.name, "Camera"); + i.type = V4L2_INPUT_TYPE_CAMERA; + + if (copy_to_user(arg, &i, sizeof(i))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_g_input(struct et61x251_device* cam, void __user * arg) +{ + int index = 0; + + if (copy_to_user(arg, &index, sizeof(index))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_input(struct et61x251_device* cam, void __user * arg) +{ + int index; + + if (copy_from_user(&index, arg, sizeof(index))) + return -EFAULT; + + if (index != 0) + return -EINVAL; + + return 0; +} + + +static int +et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_queryctrl qc; + u8 i; + + if (copy_from_user(&qc, arg, sizeof(qc))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (qc.id && qc.id == s->qctrl[i].id) { + memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); + if (copy_to_user(arg, &qc, sizeof(qc))) + return -EFAULT; + return 0; + } + + return -EINVAL; +} + + +static int +et61x251_vidioc_g_ctrl(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + int err = 0; + u8 i; + + if (!s->get_ctrl && !s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + if (!s->get_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + ctrl.value = s->_qctrl[i].default_value; + goto exit; + } + return -EINVAL; + } else + err = s->get_ctrl(cam, &ctrl); + +exit: + if (copy_to_user(arg, &ctrl, sizeof(ctrl))) + return -EFAULT; + + return err; +} + + +static int +et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + u8 i; + int err = 0; + + if (!s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED) + return -EINVAL; + if (ctrl.value < s->qctrl[i].minimum || + ctrl.value > s->qctrl[i].maximum) + return -ERANGE; + ctrl.value -= ctrl.value % s->qctrl[i].step; + break; + } + + if ((err = s->set_ctrl(cam, &ctrl))) + return err; + + s->_qctrl[i].default_value = ctrl.value; + + return 0; +} + + +static int +et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_cropcap* cc = &(cam->sensor.cropcap); + + cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cc->pixelaspect.numerator = 1; + cc->pixelaspect.denominator = 1; + + if (copy_to_user(arg, cc, sizeof(*cc))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_crop crop = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + }; + + memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect)); + + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_crop crop; + struct v4l2_rect* rect; + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_pix_format* pix_format = &(s->pix_format); + u8 scale; + const enum et61x251_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&crop, arg, sizeof(crop))) + return -EFAULT; + + rect = &(crop.c); + + if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_CROP failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + /* Preserve R,G or B origin */ + rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L; + rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L; + + if (rect->width < 4) + rect->width = 4; + if (rect->height < 4) + rect->height = 4; + if (rect->width > bounds->width) + rect->width = bounds->width; + if (rect->height > bounds->height) + rect->height = bounds->height; + if (rect->left < bounds->left) + rect->left = bounds->left; + if (rect->top < bounds->top) + rect->top = bounds->top; + if (rect->left + rect->width > bounds->left + bounds->width) + rect->left = bounds->left+bounds->width - rect->width; + if (rect->top + rect->height > bounds->top + bounds->height) + rect->top = bounds->top+bounds->height - rect->height; + + rect->width &= ~3L; + rect->height &= ~3L; + + if (ET61X251_PRESERVE_IMGSCALE) { + /* Calculate the actual scaling factor */ + u32 a, b; + a = rect->width * rect->height; + b = pix_format->width * pix_format->height; + scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1; + } else + scale = 1; + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &crop, sizeof(crop))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + et61x251_release_buffers(cam); + + err = et61x251_set_crop(cam, rect); + if (s->set_crop) + err += s->set_crop(cam, rect); + err += et61x251_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + s->pix_format.width = rect->width/scale; + s->pix_format.height = rect->height/scale; + memcpy(&(s->_rect), rect, sizeof(*rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + et61x251_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + et61x251_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_fmtdesc fmtd; + + if (copy_from_user(&fmtd, arg, sizeof(fmtd))) + return -EFAULT; + + if (fmtd.index == 0) { + strcpy(fmtd.description, "bayer rgb"); + fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8; + } else if (fmtd.index == 1) { + strcpy(fmtd.description, "compressed"); + fmtd.pixelformat = V4L2_PIX_FMT_ET61X251; + fmtd.flags = V4L2_FMT_FLAG_COMPRESSED; + } else + return -EINVAL; + + fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + memset(&fmtd.reserved, 0, sizeof(fmtd.reserved)); + + if (copy_to_user(arg, &fmtd, sizeof(fmtd))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_g_fmt(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_format format; + struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format); + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_ET61X251) + ? 0 : (pfmt->width * pfmt->priv) / 8; + pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8); + pfmt->field = V4L2_FIELD_NONE; + memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt)); + + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd, + void __user * arg) +{ + struct et61x251_sensor* s = &cam->sensor; + struct v4l2_format format; + struct v4l2_pix_format* pix; + struct v4l2_pix_format* pfmt = &(s->pix_format); + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_rect rect; + u8 scale; + const enum et61x251_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + pix = &(format.fmt.pix); + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memcpy(&rect, &(s->_rect), sizeof(rect)); + + { /* calculate the actual scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1; + } + + rect.width = scale * pix->width; + rect.height = scale * pix->height; + + if (rect.width < 4) + rect.width = 4; + if (rect.height < 4) + rect.height = 4; + if (rect.width > bounds->left + bounds->width - rect.left) + rect.width = bounds->left + bounds->width - rect.left; + if (rect.height > bounds->top + bounds->height - rect.top) + rect.height = bounds->top + bounds->height - rect.top; + + rect.width &= ~3L; + rect.height &= ~3L; + + { /* adjust the scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1; + } + + pix->width = rect.width / scale; + pix->height = rect.height / scale; + + if (pix->pixelformat != V4L2_PIX_FMT_ET61X251 && + pix->pixelformat != V4L2_PIX_FMT_SBGGR8) + pix->pixelformat = pfmt->pixelformat; + pix->priv = pfmt->priv; /* bpp */ + pix->colorspace = pfmt->colorspace; + pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_ET61X251) + ? 0 : (pix->width * pix->priv) / 8; + pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8); + pix->field = V4L2_FIELD_NONE; + + if (cmd == VIDIOC_TRY_FMT) { + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + return 0; + } + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_FMT failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &format, sizeof(format))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + et61x251_release_buffers(cam); + + err += et61x251_set_pix_format(cam, pix); + err += et61x251_set_crop(cam, &rect); + if (s->set_pix_format) + err += s->set_pix_format(cam, pix); + if (s->set_crop) + err += s->set_crop(cam, &rect); + err += et61x251_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + memcpy(pfmt, pix, sizeof(*pix)); + memcpy(&(s->_rect), &rect, sizeof(rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + et61x251_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + et61x251_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +et61x251_vidioc_g_jpegcomp(struct et61x251_device* cam, void __user * arg) +{ + if (copy_to_user(arg, &cam->compression, + sizeof(cam->compression))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_jpegcompression jc; + const enum et61x251_stream_state stream = cam->stream; + int err = 0; + + if (copy_from_user(&jc, arg, sizeof(jc))) + return -EFAULT; + + if (jc.quality != 0 && jc.quality != 1) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + err += et61x251_set_compression(cam, &jc); + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " + "problems. To use the camera, close and open " + "/dev/video%d again.", cam->v4ldev->minor); + return -EIO; + } + + cam->compression.quality = jc.quality; + + cam->stream = stream; + + return 0; +} + + +static int +et61x251_vidioc_reqbufs(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_requestbuffers rb; + u32 i; + int err; + + if (copy_from_user(&rb, arg, sizeof(rb))) + return -EFAULT; + + if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb.memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (cam->io == IO_READ) { + DBG(3, "Close and open the device again to choose the mmap " + "I/O method"); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_REQBUFS failed. " + "Previous buffers are still mapped."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + et61x251_empty_framequeues(cam); + + et61x251_release_buffers(cam); + if (rb.count) + rb.count = et61x251_request_buffers(cam, rb.count, IO_MMAP); + + if (copy_to_user(arg, &rb, sizeof(rb))) { + et61x251_release_buffers(cam); + cam->io = IO_NONE; + return -EFAULT; + } + + cam->io = rb.count ? IO_MMAP : IO_NONE; + + return 0; +} + + +static int +et61x251_vidioc_querybuf(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + memcpy(&b, &cam->frame[b.index].buf, sizeof(b)); + + if (cam->frame[b.index].vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (cam->frame[b.index].state == F_DONE) + b.flags |= V4L2_BUF_FLAG_DONE; + else if (cam->frame[b.index].state != F_UNUSED) + b.flags |= V4L2_BUF_FLAG_QUEUED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_qbuf(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + unsigned long lock_flags; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->frame[b.index].state != F_UNUSED) + return -EINVAL; + + cam->frame[b.index].state = F_QUEUED; + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[b.index].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + PDBGG("Frame #%lu queued", (unsigned long)b.index); + + return 0; +} + + +static int +et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp, + void __user * arg) +{ + struct v4l2_buffer b; + struct et61x251_frame_t *f; + unsigned long lock_flags; + long timeout; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->outqueue)) { + if (cam->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) + return timeout; + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + if (!timeout || (cam->state & DEV_MISCONFIGURED)) + return -EIO; + } + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + f = list_entry(cam->outqueue.next, struct et61x251_frame_t, frame); + list_del(cam->outqueue.next); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + f->state = F_UNUSED; + + memcpy(&b, &f->buf, sizeof(b)); + if (f->vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index); + + return 0; +} + + +static int +et61x251_vidioc_streamon(struct et61x251_device* cam, void __user * arg) +{ + int type; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->inqueue)) + return -EINVAL; + + cam->stream = STREAM_ON; + + DBG(3, "Stream on"); + + return 0; +} + + +static int +et61x251_vidioc_streamoff(struct et61x251_device* cam, void __user * arg) +{ + int type, err; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = et61x251_stream_interrupt(cam))) + return err; + + et61x251_empty_framequeues(cam); + + DBG(3, "Stream off"); + + return 0; +} + + +static int +et61x251_vidioc_g_parm(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + return 0; +} + + +static int +et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + + if (sp.parm.capture.readbuffers == 0) + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (sp.parm.capture.readbuffers > ET61X251_MAX_FRAMES) + sp.parm.capture.readbuffers = ET61X251_MAX_FRAMES; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + cam->nreadbuffers = sp.parm.capture.readbuffers; + + return 0; +} + + +static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOC_QUERYCAP: + return et61x251_vidioc_querycap(cam, arg); + + case VIDIOC_ENUMINPUT: + return et61x251_vidioc_enuminput(cam, arg); + + case VIDIOC_G_INPUT: + return et61x251_vidioc_g_input(cam, arg); + + case VIDIOC_S_INPUT: + return et61x251_vidioc_s_input(cam, arg); + + case VIDIOC_QUERYCTRL: + return et61x251_vidioc_query_ctrl(cam, arg); + + case VIDIOC_G_CTRL: + return et61x251_vidioc_g_ctrl(cam, arg); + + case VIDIOC_S_CTRL_OLD: + case VIDIOC_S_CTRL: + return et61x251_vidioc_s_ctrl(cam, arg); + + case VIDIOC_CROPCAP_OLD: + case VIDIOC_CROPCAP: + return et61x251_vidioc_cropcap(cam, arg); + + case VIDIOC_G_CROP: + return et61x251_vidioc_g_crop(cam, arg); + + case VIDIOC_S_CROP: + return et61x251_vidioc_s_crop(cam, arg); + + case VIDIOC_ENUM_FMT: + return et61x251_vidioc_enum_fmt(cam, arg); + + case VIDIOC_G_FMT: + return et61x251_vidioc_g_fmt(cam, arg); + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + return et61x251_vidioc_try_s_fmt(cam, cmd, arg); + + case VIDIOC_G_JPEGCOMP: + return et61x251_vidioc_g_jpegcomp(cam, arg); + + case VIDIOC_S_JPEGCOMP: + return et61x251_vidioc_s_jpegcomp(cam, arg); + + case VIDIOC_REQBUFS: + return et61x251_vidioc_reqbufs(cam, arg); + + case VIDIOC_QUERYBUF: + return et61x251_vidioc_querybuf(cam, arg); + + case VIDIOC_QBUF: + return et61x251_vidioc_qbuf(cam, arg); + + case VIDIOC_DQBUF: + return et61x251_vidioc_dqbuf(cam, filp, arg); + + case VIDIOC_STREAMON: + return et61x251_vidioc_streamon(cam, arg); + + case VIDIOC_STREAMOFF: + return et61x251_vidioc_streamoff(cam, arg); + + case VIDIOC_G_PARM: + return et61x251_vidioc_g_parm(cam, arg); + + case VIDIOC_S_PARM_OLD: + case VIDIOC_S_PARM: + return et61x251_vidioc_s_parm(cam, arg); + + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYMENU: + return -EINVAL; + + default: + return -EINVAL; + + } +} + + +static int et61x251_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct et61x251_device* cam = video_get_drvdata(video_devdata(filp)); + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + V4LDBG(3, "et61x251", cmd); + + err = et61x251_ioctl_v4l2(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + + return err; +} + + +static struct file_operations et61x251_fops = { + .owner = THIS_MODULE, + .open = et61x251_open, + .release = et61x251_release, + .ioctl = et61x251_ioctl, + .read = et61x251_read, + .poll = et61x251_poll, + .mmap = et61x251_mmap, + .llseek = no_llseek, +}; + +/*****************************************************************************/ + +/* It exists a single interface only. We do not need to validate anything. */ +static int +et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct et61x251_device* cam; + static unsigned int dev_nr = 0; + unsigned int i; + int err = 0; + + if (!(cam = kzalloc(sizeof(struct et61x251_device), GFP_KERNEL))) + return -ENOMEM; + + cam->usbdev = udev; + + if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) { + DBG(1, "kmalloc() failed"); + err = -ENOMEM; + goto fail; + } + + if (!(cam->v4ldev = video_device_alloc())) { + DBG(1, "video_device_alloc() failed"); + err = -ENOMEM; + goto fail; + } + + mutex_init(&cam->dev_mutex); + + DBG(2, "ET61X[12]51 PC Camera Controller detected " + "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct); + + for (i = 0; et61x251_sensor_table[i]; i++) { + err = et61x251_sensor_table[i](cam); + if (!err) + break; + } + + if (!err) + DBG(2, "%s image sensor detected", cam->sensor.name); + else { + DBG(1, "No supported image sensor detected"); + err = -ENODEV; + goto fail; + } + + if (et61x251_init(cam)) { + DBG(1, "Initialization failed. I will retry on open()."); + cam->state |= DEV_MISCONFIGURED; + } + + strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera"); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = 0; + cam->v4ldev->fops = &et61x251_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + + mutex_lock(&cam->dev_mutex); + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L2 device registration failed"); + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(1, "Free /dev/videoX node not found"); + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0; + mutex_unlock(&cam->dev_mutex); + goto fail; + } + + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + + cam->module_param.force_munmap = force_munmap[dev_nr]; + cam->module_param.frame_timeout = frame_timeout[dev_nr]; + + dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + et61x251_create_sysfs(cam); + DBG(2, "Optional device control through 'sysfs' interface ready"); +#endif + + usb_set_intfdata(intf, cam); + + mutex_unlock(&cam->dev_mutex); + + return 0; + +fail: + if (cam) { + kfree(cam->control_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + kfree(cam); + } + return err; +} + + +static void et61x251_usb_disconnect(struct usb_interface* intf) +{ + struct et61x251_device* cam = usb_get_intfdata(intf); + + if (!cam) + return; + + down_write(&et61x251_disconnect); + + mutex_lock(&cam->dev_mutex); + + DBG(2, "Disconnecting %s...", cam->v4ldev->name); + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "Device /dev/video%d is open! Deregistration and " + "memory deallocation are deferred on close.", + cam->v4ldev->minor); + cam->state |= DEV_MISCONFIGURED; + et61x251_stop_transfer(cam); + cam->state |= DEV_DISCONNECTED; + wake_up_interruptible(&cam->wait_frame); + wake_up(&cam->wait_stream); + usb_get_dev(cam->usbdev); + } else { + cam->state |= DEV_DISCONNECTED; + et61x251_release_resources(cam); + } + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + + up_write(&et61x251_disconnect); +} + + +static struct usb_driver et61x251_usb_driver = { + .name = "et61x251", + .id_table = et61x251_id_table, + .probe = et61x251_usb_probe, + .disconnect = et61x251_usb_disconnect, +}; + +/*****************************************************************************/ + +static int __init et61x251_module_init(void) +{ + int err = 0; + + KDBG(2, ET61X251_MODULE_NAME " v" ET61X251_MODULE_VERSION); + KDBG(3, ET61X251_MODULE_AUTHOR); + + if ((err = usb_register(&et61x251_usb_driver))) + KDBG(1, "usb_register() failed"); + + return err; +} + + +static void __exit et61x251_module_exit(void) +{ + usb_deregister(&et61x251_usb_driver); +} + + +module_init(et61x251_module_init); +module_exit(et61x251_module_exit); diff --git a/drivers/media/video/et61x251/et61x251_sensor.h b/drivers/media/video/et61x251/et61x251_sensor.h new file mode 100644 index 000000000000..65edd08dc386 --- /dev/null +++ b/drivers/media/video/et61x251/et61x251_sensor.h @@ -0,0 +1,116 @@ +/*************************************************************************** + * API for image sensors connected to ET61X[12]51 PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ET61X251_SENSOR_H_ +#define _ET61X251_SENSOR_H_ + +#include <linux/usb.h> +#include <linux/videodev.h> +#include <linux/device.h> +#include <linux/stddef.h> +#include <linux/errno.h> +#include <asm/types.h> + +struct et61x251_device; +struct et61x251_sensor; + +/*****************************************************************************/ + +extern int et61x251_probe_tas5130d1b(struct et61x251_device* cam); + +#define ET61X251_SENSOR_TABLE \ +/* Weak detections must go at the end of the list */ \ +static int (*et61x251_sensor_table[])(struct et61x251_device*) = { \ + &et61x251_probe_tas5130d1b, \ + NULL, \ +}; + +extern struct et61x251_device* +et61x251_match_id(struct et61x251_device* cam, const struct usb_device_id *id); + +extern void +et61x251_attach_sensor(struct et61x251_device* cam, + struct et61x251_sensor* sensor); + +/*****************************************************************************/ + +extern int et61x251_write_reg(struct et61x251_device*, u8 value, u16 index); +extern int et61x251_read_reg(struct et61x251_device*, u16 index); +extern int et61x251_i2c_write(struct et61x251_device*, u8 address, u8 value); +extern int et61x251_i2c_read(struct et61x251_device*, u8 address); +extern int et61x251_i2c_try_write(struct et61x251_device*, + struct et61x251_sensor*, u8 address, + u8 value); +extern int et61x251_i2c_try_read(struct et61x251_device*, + struct et61x251_sensor*, u8 address); +extern int et61x251_i2c_raw_write(struct et61x251_device*, u8 n, u8 data1, + u8 data2, u8 data3, u8 data4, u8 data5, + u8 data6, u8 data7, u8 data8, u8 address); + +/*****************************************************************************/ + +enum et61x251_i2c_sysfs_ops { + ET61X251_I2C_READ = 0x01, + ET61X251_I2C_WRITE = 0x02, +}; + +enum et61x251_i2c_interface { + ET61X251_I2C_2WIRES, + ET61X251_I2C_3WIRES, +}; + +/* Repeat start condition when RSTA is high */ +enum et61x251_i2c_rsta { + ET61X251_I2C_RSTA_STOP = 0x00, /* stop then start */ + ET61X251_I2C_RSTA_REPEAT = 0x01, /* repeat start */ +}; + +#define ET61X251_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 + +struct et61x251_sensor { + char name[32]; + + enum et61x251_i2c_sysfs_ops sysfs_ops; + + enum et61x251_i2c_interface interface; + u8 i2c_slave_id; + enum et61x251_i2c_rsta rsta; + struct v4l2_rect active_pixel; /* left and top define FVSX and FVSY */ + + struct v4l2_queryctrl qctrl[ET61X251_MAX_CTRLS]; + struct v4l2_cropcap cropcap; + struct v4l2_pix_format pix_format; + + int (*init)(struct et61x251_device* cam); + int (*get_ctrl)(struct et61x251_device* cam, + struct v4l2_control* ctrl); + int (*set_ctrl)(struct et61x251_device* cam, + const struct v4l2_control* ctrl); + int (*set_crop)(struct et61x251_device* cam, + const struct v4l2_rect* rect); + int (*set_pix_format)(struct et61x251_device* cam, + const struct v4l2_pix_format* pix); + + /* Private */ + struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS]; + struct v4l2_rect _rect; +}; + +#endif /* _ET61X251_SENSOR_H_ */ diff --git a/drivers/media/video/et61x251/et61x251_tas5130d1b.c b/drivers/media/video/et61x251/et61x251_tas5130d1b.c new file mode 100644 index 000000000000..a7d65b82b2fb --- /dev/null +++ b/drivers/media/video/et61x251/et61x251_tas5130d1b.c @@ -0,0 +1,141 @@ +/*************************************************************************** + * Plug-in for TAS5130D1B image sensor connected to the ET61X[12]51 * + * PC Camera Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "et61x251_sensor.h" + + +static int tas5130d1b_init(struct et61x251_device* cam) +{ + int err = 0; + + err += et61x251_write_reg(cam, 0x14, 0x01); + err += et61x251_write_reg(cam, 0x1b, 0x02); + err += et61x251_write_reg(cam, 0x02, 0x12); + err += et61x251_write_reg(cam, 0x0e, 0x60); + err += et61x251_write_reg(cam, 0x80, 0x61); + err += et61x251_write_reg(cam, 0xf0, 0x62); + err += et61x251_write_reg(cam, 0x03, 0x63); + err += et61x251_write_reg(cam, 0x14, 0x64); + err += et61x251_write_reg(cam, 0xf4, 0x65); + err += et61x251_write_reg(cam, 0x01, 0x66); + err += et61x251_write_reg(cam, 0x05, 0x67); + err += et61x251_write_reg(cam, 0x8f, 0x68); + err += et61x251_write_reg(cam, 0x0f, 0x8d); + err += et61x251_write_reg(cam, 0x08, 0x8e); + + return err; +} + + +static int tas5130d1b_set_ctrl(struct et61x251_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + err += et61x251_i2c_raw_write(cam, 2, 0x20, + 0xf6-ctrl->value, 0, 0, 0, + 0, 0, 0, 0); + break; + case V4L2_CID_EXPOSURE: + err += et61x251_i2c_raw_write(cam, 2, 0x40, + 0x47-ctrl->value, 0, 0, 0, + 0, 0, 0, 0); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static struct et61x251_sensor tas5130d1b = { + .name = "TAS5130D1B", + .interface = ET61X251_I2C_3WIRES, + .rsta = ET61X251_I2C_RSTA_STOP, + .active_pixel = { + .left = 106, + .top = 13, + }, + .init = &tas5130d1b_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0xf6, + .step = 0x02, + .default_value = 0x0d, + .flags = 0, + }, + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0x47, + .step = 0x01, + .default_value = 0x23, + .flags = 0, + }, + }, + .set_ctrl = &tas5130d1b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, +}; + + +int et61x251_probe_tas5130d1b(struct et61x251_device* cam) +{ + const struct usb_device_id tas5130d1b_id_table[] = { + { USB_DEVICE(0x102c, 0x6251), }, + { } + }; + + /* Sensor detection is based on USB pid/vid */ + if (!et61x251_match_id(cam, tas5130d1b_id_table)) + return -ENODEV; + + et61x251_attach_sensor(cam, &tas5130d1b); + + return 0; +} diff --git a/drivers/media/video/font.h b/drivers/media/video/font.h new file mode 100644 index 000000000000..8b1fecc37599 --- /dev/null +++ b/drivers/media/video/font.h @@ -0,0 +1,407 @@ +static unsigned char rom8x16_bits[] = { +/* Character 0 (0x30): + ht=16, width=8 + +--------+ + | | + | | + | ***** | + |** ** | + |** ** | + |** *** | + |** **** | + |**** ** | + |*** ** | + |** ** | + |** ** | + | ***** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x7c, +0xc6, +0xc6, +0xce, +0xde, +0xf6, +0xe6, +0xc6, +0xc6, +0x7c, +0x00, +0x00, +0x00, +0x00, + +/* Character 1 (0x31): + ht=16, width=8 + +--------+ + | | + | | + | ** | + | **** | + | ** | + | ** | + | ** | + | ** | + | ** | + | ** | + | ** | + | ****** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x18, +0x78, +0x18, +0x18, +0x18, +0x18, +0x18, +0x18, +0x18, +0x7e, +0x00, +0x00, +0x00, +0x00, + +/* Character 2 (0x32): + ht=16, width=8 + +--------+ + | | + | | + | ***** | + |** ** | + |** ** | + | ** | + | ** | + | ** | + | ** | + | ** | + |** ** | + |******* | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x7c, +0xc6, +0xc6, +0x06, +0x0c, +0x18, +0x30, +0x60, +0xc6, +0xfe, +0x00, +0x00, +0x00, +0x00, + +/* Character 3 (0x33): + ht=16, width=8 + +--------+ + | | + | | + | ***** | + |** ** | + | ** | + | ** | + | **** | + | ** | + | ** | + | ** | + |** ** | + | ***** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x7c, +0xc6, +0x06, +0x06, +0x3c, +0x06, +0x06, +0x06, +0xc6, +0x7c, +0x00, +0x00, +0x00, +0x00, + +/* Character 4 (0x34): + ht=16, width=8 + +--------+ + | | + | | + | ** | + | *** | + | **** | + | ** ** | + |** ** | + |** ** | + |******* | + | ** | + | ** | + | **** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x0c, +0x1c, +0x3c, +0x6c, +0xcc, +0xcc, +0xfe, +0x0c, +0x0c, +0x1e, +0x00, +0x00, +0x00, +0x00, + +/* Character 5 (0x35): + ht=16, width=8 + +--------+ + | | + | | + |******* | + |** | + |** | + |** | + |****** | + | ** | + | ** | + | ** | + |** ** | + | ***** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0xfe, +0xc0, +0xc0, +0xc0, +0xfc, +0x06, +0x06, +0x06, +0xc6, +0x7c, +0x00, +0x00, +0x00, +0x00, + +/* Character 6 (0x36): + ht=16, width=8 + +--------+ + | | + | | + | ***** | + |** ** | + |** | + |** | + |****** | + |** ** | + |** ** | + |** ** | + |** ** | + | ***** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x7c, +0xc6, +0xc0, +0xc0, +0xfc, +0xc6, +0xc6, +0xc6, +0xc6, +0x7c, +0x00, +0x00, +0x00, +0x00, + +/* Character 7 (0x37): + ht=16, width=8 + +--------+ + | | + | | + |******* | + |** ** | + | ** | + | ** | + | ** | + | ** | + | ** | + | ** | + | ** | + | ** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0xfe, +0xc6, +0x06, +0x0c, +0x18, +0x30, +0x30, +0x30, +0x30, +0x30, +0x00, +0x00, +0x00, +0x00, + +/* Character 8 (0x38): + ht=16, width=8 + +--------+ + | | + | | + | ***** | + |** ** | + |** ** | + |** ** | + | ***** | + |** ** | + |** ** | + |** ** | + |** ** | + | ***** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x7c, +0xc6, +0xc6, +0xc6, +0x7c, +0xc6, +0xc6, +0xc6, +0xc6, +0x7c, +0x00, +0x00, +0x00, +0x00, + +/* Character 9 (0x39): + ht=16, width=8 + +--------+ + | | + | | + | ***** | + |** ** | + |** ** | + |** ** | + |** ** | + | ****** | + | ** | + | ** | + |** ** | + | ***** | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x7c, +0xc6, +0xc6, +0xc6, +0xc6, +0x7e, +0x06, +0x06, +0xc6, +0x7c, +0x00, +0x00, +0x00, +0x00, +/* Character : (0x3a): + ht=16, width=8 + +--------+ + | | + | | + | | + | | + | | + | ** | + | ** | + | | + | | + | ** | + | ** | + | | + | | + | | + | | + | | + +--------+ */ +0x00, +0x00, +0x00, +0x00, +0x00, +0x0c, +0x0c, +0x00, +0x00, +0x0c, +0x0c, +0x00, +0x00, +0x00, +0x00, +0x00, +}; diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c index e7bbeb11553d..c7fed3405655 100644 --- a/drivers/media/video/hexium_gemini.c +++ b/drivers/media/video/hexium_gemini.c @@ -1,9 +1,9 @@ /* hexium_gemini.c - v4l2 driver for Hexium Gemini frame grabber cards - + Visit http://www.mihu.de/linux/saa7146/ and follow the link to "hexium" for further details about this card. - + Copyright (C) 2003 Michael Hunold <michael@mihu.de> This program is free software; you can redistribute it and/or modify @@ -81,7 +81,7 @@ struct hexium struct video_device *video_dev; struct i2c_adapter i2c_adapter; - + int cur_input; /* current input */ v4l2_std_id cur_std; /* current standard */ int cur_bw; /* current black/white status */ @@ -174,7 +174,7 @@ static struct saa7146_standard hexium_standards[] = { .h_offset = 1, .h_pixels = 720, .v_max_out = 576, .h_max_out = 768, } -}; +}; /* bring hardware to a sane state. this has to be done, just in case someone wants to capture from this device before it has been properly initialized. @@ -311,7 +311,7 @@ static int hexium_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct saa7146_dev *dev = fh->dev; struct hexium *hexium = (struct hexium *) dev->ext_priv; /* - struct saa7146_vv *vv = dev->vv_data; + struct saa7146_vv *vv = dev->vv_data; */ switch (cmd) { case VIDIOC_ENUMINPUT: diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c index aad4a18aafd6..137c4736da04 100644 --- a/drivers/media/video/hexium_orion.c +++ b/drivers/media/video/hexium_orion.c @@ -3,7 +3,7 @@ Visit http://www.mihu.de/linux/saa7146/ and follow the link to "hexium" for further details about this card. - + Copyright (C) 2003 Michael Hunold <michael@mihu.de> This program is free software; you can redistribute it and/or modify @@ -69,7 +69,7 @@ struct hexium { int type; struct video_device *video_dev; - struct i2c_adapter i2c_adapter; + struct i2c_adapter i2c_adapter; int cur_input; /* current input */ }; @@ -86,7 +86,7 @@ static u8 hexium_saa7110[53]={ }; static struct { - struct hexium_data data[8]; + struct hexium_data data[8]; } hexium_input_select[] = { { { /* cvbs 1 */ @@ -153,7 +153,7 @@ static struct { { 0x30, 0x60 }, { 0x31, 0xB5 }, // ?? { 0x21, 0x03 }, - } + } }, { { /* y/c 1 */ { 0x06, 0x80 }, @@ -187,7 +187,7 @@ static struct { { 0x31, 0x75 }, { 0x21, 0x21 }, } -} +} }; static struct saa7146_standard hexium_standards[] = { @@ -207,7 +207,7 @@ static struct saa7146_standard hexium_standards[] = { .h_offset = 1, .h_pixels = 720, .v_max_out = 576, .h_max_out = 768, } -}; +}; /* this is only called for old HV-PCI6/Orion cards without eeprom */ @@ -272,7 +272,7 @@ static int hexium_probe(struct saa7146_dev *dev) return 0; } - /* check if this is an old hexium Orion card by looking at + /* check if this is an old hexium Orion card by looking at a saa7110 at address 0x4e */ if (0 == (err = i2c_smbus_xfer(&hexium->i2c_adapter, 0x4e, 0, I2C_SMBUS_READ, 0x00, I2C_SMBUS_BYTE_DATA, &data))) { printk("hexium_orion: device is a Hexium HV-PCI6/Orion (old).\n"); @@ -314,7 +314,7 @@ static int hexium_set_input(struct hexium *hexium, int input) { union i2c_smbus_data data; int i = 0; - + DEB_D((".\n")); for (i = 0; i < 8; i++) { @@ -375,7 +375,7 @@ static int hexium_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct saa7146_dev *dev = fh->dev; struct hexium *hexium = (struct hexium *) dev->ext_priv; /* - struct saa7146_vv *vv = dev->vv_data; + struct saa7146_vv *vv = dev->vv_data; */ switch (cmd) { case VIDIOC_ENUMINPUT: diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 58b0e6982822..95bacf435414 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -44,51 +44,17 @@ #include <media/ir-common.h> #include <media/ir-kbd-i2c.h> -/* Mark Phalan <phalanm@o2.ie> */ -static IR_KEYTAB_TYPE ir_codes_pv951[IR_KEYTAB_SIZE] = { - [ 0 ] = KEY_KP0, - [ 1 ] = KEY_KP1, - [ 2 ] = KEY_KP2, - [ 3 ] = KEY_KP3, - [ 4 ] = KEY_KP4, - [ 5 ] = KEY_KP5, - [ 6 ] = KEY_KP6, - [ 7 ] = KEY_KP7, - [ 8 ] = KEY_KP8, - [ 9 ] = KEY_KP9, - - [ 18 ] = KEY_POWER, - [ 16 ] = KEY_MUTE, - [ 31 ] = KEY_VOLUMEDOWN, - [ 27 ] = KEY_VOLUMEUP, - [ 26 ] = KEY_CHANNELUP, - [ 30 ] = KEY_CHANNELDOWN, - [ 14 ] = KEY_PAGEUP, - [ 29 ] = KEY_PAGEDOWN, - [ 19 ] = KEY_SOUND, - - [ 24 ] = KEY_KPPLUSMINUS, /* CH +/- */ - [ 22 ] = KEY_SUBTITLE, /* CC */ - [ 13 ] = KEY_TEXT, /* TTX */ - [ 11 ] = KEY_TV, /* AIR/CBL */ - [ 17 ] = KEY_PC, /* PC/TV */ - [ 23 ] = KEY_OK, /* CH RTN */ - [ 25 ] = KEY_MODE, /* FUNC */ - [ 12 ] = KEY_SEARCH, /* AUTOSCAN */ - - /* Not sure what to do with these ones! */ - [ 15 ] = KEY_SELECT, /* SOURCE */ - [ 10 ] = KEY_KPPLUS, /* +100 */ - [ 20 ] = KEY_KPEQUAL, /* SYNC */ - [ 28 ] = KEY_MEDIA, /* PC/TV */ -}; - /* ----------------------------------------------------------------------- */ /* insmod parameters */ static int debug; module_param(debug, int, 0644); /* debug level (0,1,2) */ +static int hauppauge = 0; +module_param(hauppauge, int, 0644); /* Choose Hauppauge remote */ +MODULE_PARM_DESC(hauppauge, "Specify Hauppauge remote: 0=black, 1=grey (defaults to 0)"); + + #define DEVNAME "ir-kbd-i2c" #define dprintk(level, fmt, arg...) if (debug >= level) \ printk(KERN_DEBUG DEVNAME ": " fmt , ## arg) @@ -336,7 +302,11 @@ static int ir_attach(struct i2c_adapter *adap, int addr, name = "Hauppauge"; ir->get_key = get_key_haup; ir_type = IR_TYPE_RC5; - ir_codes = ir_codes_rc5_tv; + if (hauppauge == 1) { + ir_codes = ir_codes_hauppauge_new; + } else { + ir_codes = ir_codes_rc5_tv; + } break; case 0x30: name = "KNC One"; diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 2869464aee0d..850bee97090c 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -925,7 +925,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (p->palette != VIDEO_PALETTE_YUV422) return -EINVAL; - down(&meye.lock); + mutex_lock(&meye.lock); sonypi_camera_command(SONYPI_COMMAND_SETCAMERABRIGHTNESS, p->brightness >> 10); sonypi_camera_command(SONYPI_COMMAND_SETCAMERAHUE, @@ -935,7 +935,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, sonypi_camera_command(SONYPI_COMMAND_SETCAMERACONTRAST, p->contrast >> 10); meye.picture = *p; - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -946,21 +946,21 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, if (*i < 0 || *i >= gbuffers) return -EINVAL; - down(&meye.lock); + mutex_lock(&meye.lock); switch (meye.grab_buffer[*i].state) { case MEYE_BUF_UNUSED: - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; case MEYE_BUF_USING: if (file->f_flags & O_NONBLOCK) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EAGAIN; } if (wait_event_interruptible(meye.proc_list, (meye.grab_buffer[*i].state != MEYE_BUF_USING))) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINTR; } /* fall through */ @@ -968,7 +968,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, meye.grab_buffer[*i].state = MEYE_BUF_UNUSED; kfifo_get(meye.doneq, (unsigned char *)&unused, sizeof(int)); } - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -987,7 +987,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, if (meye.grab_buffer[vm->frame].state != MEYE_BUF_UNUSED) return -EBUSY; - down(&meye.lock); + mutex_lock(&meye.lock); if (vm->width == 640 && vm->height == 480) { if (meye.params.subsample) { meye.params.subsample = 0; @@ -999,7 +999,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, restart = 1; } } else { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; } @@ -1007,7 +1007,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, mchip_continuous_start(); meye.grab_buffer[vm->frame].state = MEYE_BUF_USING; kfifo_put(meye.grabq, (unsigned char *)&vm->frame, sizeof(int)); - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1039,7 +1039,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (jp->framerate > 31) return -EINVAL; - down(&meye.lock); + mutex_lock(&meye.lock); if (meye.params.subsample != jp->subsample || meye.params.quality != jp->quality) mchip_hic_stop(); /* need restart */ @@ -1050,7 +1050,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, meye.params.agc); sonypi_camera_command(SONYPI_COMMAND_SETCAMERAPICTURE, meye.params.picture); - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1068,12 +1068,12 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, } if (meye.grab_buffer[*nb].state != MEYE_BUF_UNUSED) return -EBUSY; - down(&meye.lock); + mutex_lock(&meye.lock); if (meye.mchip_mode != MCHIP_HIC_MODE_CONT_COMP) mchip_cont_compression_start(); meye.grab_buffer[*nb].state = MEYE_BUF_USING; kfifo_put(meye.grabq, (unsigned char *)nb, sizeof(int)); - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1084,20 +1084,20 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, if (*i < 0 || *i >= gbuffers) return -EINVAL; - down(&meye.lock); + mutex_lock(&meye.lock); switch (meye.grab_buffer[*i].state) { case MEYE_BUF_UNUSED: - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; case MEYE_BUF_USING: if (file->f_flags & O_NONBLOCK) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EAGAIN; } if (wait_event_interruptible(meye.proc_list, (meye.grab_buffer[*i].state != MEYE_BUF_USING))) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINTR; } /* fall through */ @@ -1106,7 +1106,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, kfifo_get(meye.doneq, (unsigned char *)&unused, sizeof(int)); } *i = meye.grab_buffer[*i].size; - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1116,14 +1116,14 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) return -EBUSY; - down(&meye.lock); + mutex_lock(&meye.lock); meye.grab_buffer[0].state = MEYE_BUF_USING; mchip_take_picture(); mchip_get_picture( meye.grab_fbuffer, mchip_hsize() * mchip_vsize() * 2); meye.grab_buffer[0].state = MEYE_BUF_DONE; - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1134,7 +1134,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (meye.grab_buffer[0].state != MEYE_BUF_UNUSED) return -EBUSY; - down(&meye.lock); + mutex_lock(&meye.lock); meye.grab_buffer[0].state = MEYE_BUF_USING; *len = -1; while (*len == -1) { @@ -1142,7 +1142,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, *len = mchip_compress_frame(meye.grab_fbuffer, gbufsize); } meye.grab_buffer[0].state = MEYE_BUF_DONE; - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1285,7 +1285,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_S_CTRL: { struct v4l2_control *c = arg; - down(&meye.lock); + mutex_lock(&meye.lock); switch (c->id) { case V4L2_CID_BRIGHTNESS: sonypi_camera_command( @@ -1329,17 +1329,17 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, meye.params.framerate = c->value; break; default: - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; } - up(&meye.lock); + mutex_unlock(&meye.lock); break; } case VIDIOC_G_CTRL: { struct v4l2_control *c = arg; - down(&meye.lock); + mutex_lock(&meye.lock); switch (c->id) { case V4L2_CID_BRIGHTNESS: c->value = meye.picture.brightness >> 10; @@ -1369,10 +1369,10 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, c->value = meye.params.framerate; break; default: - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; } - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1469,7 +1469,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, f->fmt.pix.field != V4L2_FIELD_NONE) return -EINVAL; f->fmt.pix.field = V4L2_FIELD_NONE; - down(&meye.lock); + mutex_lock(&meye.lock); if (f->fmt.pix.width <= 320) { f->fmt.pix.width = 320; f->fmt.pix.height = 240; @@ -1487,7 +1487,7 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, meye.mchip_mode = MCHIP_HIC_MODE_CONT_COMP; break; } - up(&meye.lock); + mutex_unlock(&meye.lock); f->fmt.pix.bytesperline = f->fmt.pix.width * 2; f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; @@ -1509,11 +1509,11 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, /* already allocated, no modifications */ break; } - down(&meye.lock); + mutex_lock(&meye.lock); if (meye.grab_fbuffer) { for (i = 0; i < gbuffers; i++) if (meye.vma_use_count[i]) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; } rvfree(meye.grab_fbuffer, gbuffers * gbufsize); @@ -1525,12 +1525,12 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, if (!meye.grab_fbuffer) { printk(KERN_ERR "meye: v4l framebuffer allocation" " failed\n"); - up(&meye.lock); + mutex_unlock(&meye.lock); return -ENOMEM; } for (i = 0; i < gbuffers; i++) meye.vma_use_count[i] = 0; - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1569,12 +1569,12 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (meye.grab_buffer[buf->index].state != MEYE_BUF_UNUSED) return -EINVAL; - down(&meye.lock); + mutex_lock(&meye.lock); buf->flags |= V4L2_BUF_FLAG_QUEUED; buf->flags &= ~V4L2_BUF_FLAG_DONE; meye.grab_buffer[buf->index].state = MEYE_BUF_USING; kfifo_put(meye.grabq, (unsigned char *)&buf->index, sizeof(int)); - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1587,23 +1587,23 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, if (buf->memory != V4L2_MEMORY_MMAP) return -EINVAL; - down(&meye.lock); + mutex_lock(&meye.lock); if (kfifo_len(meye.doneq) == 0 && file->f_flags & O_NONBLOCK) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EAGAIN; } if (wait_event_interruptible(meye.proc_list, kfifo_len(meye.doneq) != 0) < 0) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINTR; } if (!kfifo_get(meye.doneq, (unsigned char *)&reqnr, sizeof(int))) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EBUSY; } if (meye.grab_buffer[reqnr].state != MEYE_BUF_DONE) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; } buf->index = reqnr; @@ -1616,12 +1616,12 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, buf->m.offset = reqnr * gbufsize; buf->length = gbufsize; meye.grab_buffer[reqnr].state = MEYE_BUF_UNUSED; - up(&meye.lock); + mutex_unlock(&meye.lock); break; } case VIDIOC_STREAMON: { - down(&meye.lock); + mutex_lock(&meye.lock); switch (meye.mchip_mode) { case MCHIP_HIC_MODE_CONT_OUT: mchip_continuous_start(); @@ -1630,23 +1630,23 @@ static int meye_do_ioctl(struct inode *inode, struct file *file, mchip_cont_compression_start(); break; default: - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; } - up(&meye.lock); + mutex_unlock(&meye.lock); break; } case VIDIOC_STREAMOFF: { int i; - down(&meye.lock); + mutex_lock(&meye.lock); mchip_hic_stop(); kfifo_reset(meye.grabq); kfifo_reset(meye.doneq); for (i = 0; i < MEYE_MAX_BUFNBRS; i++) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; - up(&meye.lock); + mutex_unlock(&meye.lock); break; } @@ -1672,11 +1672,11 @@ static unsigned int meye_poll(struct file *file, poll_table *wait) { unsigned int res = 0; - down(&meye.lock); + mutex_lock(&meye.lock); poll_wait(file, &meye.proc_list, wait); if (kfifo_len(meye.doneq)) res = POLLIN | POLLRDNORM; - up(&meye.lock); + mutex_unlock(&meye.lock); return res; } @@ -1704,9 +1704,9 @@ static int meye_mmap(struct file *file, struct vm_area_struct *vma) unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; unsigned long page, pos; - down(&meye.lock); + mutex_lock(&meye.lock); if (size > gbuffers * gbufsize) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EINVAL; } if (!meye.grab_fbuffer) { @@ -1716,7 +1716,7 @@ static int meye_mmap(struct file *file, struct vm_area_struct *vma) meye.grab_fbuffer = rvmalloc(gbuffers*gbufsize); if (!meye.grab_fbuffer) { printk(KERN_ERR "meye: v4l framebuffer allocation failed\n"); - up(&meye.lock); + mutex_unlock(&meye.lock); return -ENOMEM; } for (i = 0; i < gbuffers; i++) @@ -1727,7 +1727,7 @@ static int meye_mmap(struct file *file, struct vm_area_struct *vma) while (size > 0) { page = vmalloc_to_pfn((void *)pos); if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { - up(&meye.lock); + mutex_unlock(&meye.lock); return -EAGAIN; } start += PAGE_SIZE; @@ -1744,7 +1744,7 @@ static int meye_mmap(struct file *file, struct vm_area_struct *vma) vma->vm_private_data = (void *) (offset / gbufsize); meye_vm_open(vma); - up(&meye.lock); + mutex_unlock(&meye.lock); return 0; } @@ -1913,7 +1913,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev, goto outvideoreg; } - init_MUTEX(&meye.lock); + mutex_init(&meye.lock); init_waitqueue_head(&meye.proc_list); meye.picture.depth = 16; meye.picture.palette = VIDEO_PALETTE_YUV422; diff --git a/drivers/media/video/meye.h b/drivers/media/video/meye.h index e8cd897b0d20..0d09a0e3803c 100644 --- a/drivers/media/video/meye.h +++ b/drivers/media/video/meye.h @@ -260,6 +260,8 @@ /* private API definitions */ #include <linux/meye.h> +#include <linux/mutex.h> + /* Enable jpg software correction */ #define MEYE_JPEG_CORRECTION 1 @@ -301,7 +303,7 @@ struct meye { /* list of buffers */ struct meye_grab_buffer grab_buffer[MEYE_MAX_BUFNBRS]; int vma_use_count[MEYE_MAX_BUFNBRS]; /* mmap count */ - struct semaphore lock; /* semaphore for open/mmap... */ + struct mutex lock; /* mutex for open/mmap... */ struct kfifo *grabq; /* queue for buffers to be grabbed */ spinlock_t grabq_lock; /* lock protecting the queue */ struct kfifo *doneq; /* queue for grabbed buffers */ diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index 69ed369c2f48..c40e8ba9a2ea 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -53,10 +53,11 @@ #include <linux/videodev.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> -#include <media/audiochip.h> +#include <media/tvaudio.h> +#include <media/msp3400.h> #include <linux/kthread.h> #include <linux/suspend.h> -#include "msp3400.h" +#include "msp3400-driver.h" /* ---------------------------------------------------------------------- */ @@ -245,31 +246,31 @@ int msp_write_dsp(struct i2c_client *client, int addr, int val) * ----------------------------------------------------------------------- */ static int scarts[3][9] = { - /* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */ + /* MASK IN1 IN2 IN3 IN4 IN1_DA IN2_DA MONO MUTE */ /* SCART DSP Input select */ - { 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 }, + { 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1, -1, 0x0100, 0x0320 }, /* SCART1 Output select */ - { 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 }, + { 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 }, /* SCART2 Output select */ - { 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 }, + { 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 }, }; static char *scart_names[] = { - "mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute" + "in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute" }; void msp_set_scart(struct i2c_client *client, int in, int out) { struct msp_state *state = i2c_get_clientdata(client); - state->in_scart=in; + state->in_scart = in; - if (in >= 1 && in <= 8 && out >= 0 && out <= 2) { - if (-1 == scarts[out][in]) + if (in >= 0 && in <= 7 && out >= 0 && out <= 2) { + if (-1 == scarts[out][in + 1]) return; - state->acb &= ~scarts[out][SCART_MASK]; - state->acb |= scarts[out][in]; + state->acb &= ~scarts[out][0]; + state->acb |= scarts[out][in + 1]; } else state->acb = 0xf60; /* Mute Input and SCART 1 Output */ @@ -336,37 +337,6 @@ void msp_set_audio(struct i2c_client *client) msp_write_dsp(client, 0x0033, loudness); } -int msp_modus(struct i2c_client *client) -{ - struct msp_state *state = i2c_get_clientdata(client); - - if (state->radio) { - v4l_dbg(1, msp_debug, client, "video mode selected to Radio\n"); - return 0x0003; - } - - if (state->v4l2_std & V4L2_STD_PAL) { - v4l_dbg(1, msp_debug, client, "video mode selected to PAL\n"); - -#if 1 - /* experimental: not sure this works with all chip versions */ - return 0x7003; -#else - /* previous value, try this if it breaks ... */ - return 0x1003; -#endif - } - if (state->v4l2_std & V4L2_STD_NTSC) { - v4l_dbg(1, msp_debug, client, "video mode selected to NTSC\n"); - return 0x2003; - } - if (state->v4l2_std & V4L2_STD_SECAM) { - v4l_dbg(1, msp_debug, client, "video mode selected to SECAM\n"); - return 0x0003; - } - return 0x0003; -} - /* ------------------------------------------------------------------------ */ @@ -411,9 +381,9 @@ static int msp_mode_v4l2_to_v4l1(int rxsubchans) if (rxsubchans & V4L2_TUNER_SUB_STEREO) mode |= VIDEO_SOUND_STEREO; if (rxsubchans & V4L2_TUNER_SUB_LANG2) - mode |= VIDEO_SOUND_LANG2; + mode |= VIDEO_SOUND_LANG2 | VIDEO_SOUND_STEREO; if (rxsubchans & V4L2_TUNER_SUB_LANG1) - mode |= VIDEO_SOUND_LANG1; + mode |= VIDEO_SOUND_LANG1 | VIDEO_SOUND_STEREO; if (mode == 0) mode |= VIDEO_SOUND_MONO; return mode; @@ -430,21 +400,6 @@ static int msp_mode_v4l1_to_v4l2(int mode) return V4L2_TUNER_MODE_MONO; } -static void msp_any_detect_stereo(struct i2c_client *client) -{ - struct msp_state *state = i2c_get_clientdata(client); - - switch (state->opmode) { - case OPMODE_MANUAL: - case OPMODE_AUTODETECT: - autodetect_stereo(client); - break; - case OPMODE_AUTOSELECT: - msp34xxg_detect_stereo(client); - break; - } -} - static struct v4l2_queryctrl msp_qctrl_std[] = { { .id = V4L2_CID_AUDIO_VOLUME, @@ -506,22 +461,6 @@ static struct v4l2_queryctrl msp_qctrl_sound_processing[] = { }; -static void msp_any_set_audmode(struct i2c_client *client, int audmode) -{ - struct msp_state *state = i2c_get_clientdata(client); - - switch (state->opmode) { - case OPMODE_MANUAL: - case OPMODE_AUTODETECT: - state->watch_stereo = 0; - msp3400c_setstereo(client, audmode); - break; - case OPMODE_AUTOSELECT: - msp34xxg_set_audmode(client, audmode); - break; - } -} - static int msp_get_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) { struct msp_state *state = i2c_get_clientdata(client); @@ -616,52 +555,11 @@ static int msp_set_ctrl(struct i2c_client *client, struct v4l2_control *ctrl) static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct msp_state *state = i2c_get_clientdata(client); - u16 *sarg = arg; - int scart = 0; if (msp_debug >= 2) v4l_i2c_print_ioctl(client, cmd); switch (cmd) { - case AUDC_SET_INPUT: - if (*sarg == state->input) - break; - state->input = *sarg; - switch (*sarg) { - case AUDIO_RADIO: - /* Hauppauge uses IN2 for the radio */ - state->mode = MSP_MODE_FM_RADIO; - scart = SCART_IN2; - break; - case AUDIO_EXTERN_1: - /* IN1 is often used for external input ... */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN1; - break; - case AUDIO_EXTERN_2: - /* ... sometimes it is IN2 through ;) */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN2; - break; - case AUDIO_TUNER: - state->mode = -1; - break; - default: - if (*sarg & AUDIO_MUTE) - msp_set_scart(client, SCART_MUTE, 0); - break; - } - if (scart) { - state->rxsubchans = V4L2_TUNER_SUB_STEREO; - state->audmode = V4L2_TUNER_MODE_STEREO; - msp_set_scart(client, scart, 0); - msp_write_dsp(client, 0x000d, 0x1900); - if (state->opmode != OPMODE_AUTOSELECT) - msp3400c_setstereo(client, state->audmode); - } - msp_wake_thread(client); - break; - case AUDC_SET_RADIO: if (state->radio) return 0; @@ -671,8 +569,8 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) switch (state->opmode) { case OPMODE_MANUAL: /* set msp3400 to FM radio mode */ - msp3400c_setmode(client, MSP_MODE_FM_RADIO); - msp3400c_setcarrier(client, MSP_CARRIER(10.7), + msp3400c_set_mode(client, MSP_MODE_FM_RADIO); + msp3400c_set_carrier(client, MSP_CARRIER(10.7), MSP_CARRIER(10.7)); msp_set_audio(client); break; @@ -706,7 +604,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) if (state->radio) break; if (state->opmode == OPMODE_AUTOSELECT) - msp_any_detect_stereo(client); + msp_detect_stereo(client); va->mode = msp_mode_v4l2_to_v4l1(state->rxsubchans); break; } @@ -722,8 +620,10 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) state->treble = va->treble; msp_set_audio(client); - if (va->mode != 0 && state->radio == 0) - msp_any_set_audmode(client, msp_mode_v4l1_to_v4l2(va->mode)); + if (va->mode != 0 && state->radio == 0) { + state->audmode = msp_mode_v4l1_to_v4l2(va->mode); + msp_set_audmode(client); + } break; } @@ -759,15 +659,6 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } - /* msp34xx specific */ - case MSP_SET_MATRIX: - { - struct msp_matrix *mspm = arg; - - msp_set_scart(client, mspm->input, mspm->output); - break; - } - /* --- v4l2 ioctls --- */ case VIDIOC_S_STD: { @@ -781,100 +672,35 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; } - case VIDIOC_ENUMINPUT: + case VIDIOC_INT_G_AUDIO_ROUTING: { - struct v4l2_input *i = arg; - - if (i->index != 0) - return -EINVAL; - - i->type = V4L2_INPUT_TYPE_TUNER; - switch (i->index) { - case AUDIO_RADIO: - strcpy(i->name, "Radio"); - break; - case AUDIO_EXTERN_1: - strcpy(i->name, "Extern 1"); - break; - case AUDIO_EXTERN_2: - strcpy(i->name, "Extern 2"); - break; - case AUDIO_TUNER: - strcpy(i->name, "Television"); - break; - default: - return -EINVAL; - } - return 0; - } - - case VIDIOC_G_AUDIO: - { - struct v4l2_audio *a = arg; - - memset(a, 0, sizeof(*a)); - - switch (a->index) { - case AUDIO_RADIO: - strcpy(a->name, "Radio"); - break; - case AUDIO_EXTERN_1: - strcpy(a->name, "Extern 1"); - break; - case AUDIO_EXTERN_2: - strcpy(a->name, "Extern 2"); - break; - case AUDIO_TUNER: - strcpy(a->name, "Television"); - break; - default: - return -EINVAL; - } - - msp_any_detect_stereo(client); - if (state->audmode == V4L2_TUNER_MODE_STEREO) { - a->capability = V4L2_AUDCAP_STEREO; - } + struct v4l2_routing *rt = arg; + *rt = state->routing; break; } - case VIDIOC_S_AUDIO: + case VIDIOC_INT_S_AUDIO_ROUTING: { - struct v4l2_audio *sarg = arg; - - switch (sarg->index) { - case AUDIO_RADIO: - /* Hauppauge uses IN2 for the radio */ - state->mode = MSP_MODE_FM_RADIO; - scart = SCART_IN2; - break; - case AUDIO_EXTERN_1: - /* IN1 is often used for external input ... */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN1; - break; - case AUDIO_EXTERN_2: - /* ... sometimes it is IN2 through ;) */ - state->mode = MSP_MODE_EXTERN; - scart = SCART_IN2; - break; - case AUDIO_TUNER: - state->mode = -1; - break; - } - if (scart) { - state->rxsubchans = V4L2_TUNER_SUB_STEREO; - state->audmode = V4L2_TUNER_MODE_STEREO; - msp_set_scart(client, scart, 0); - msp_write_dsp(client, 0x000d, 0x1900); - } - if (sarg->capability == V4L2_AUDCAP_STEREO) { - state->audmode = V4L2_TUNER_MODE_STEREO; + struct v4l2_routing *rt = arg; + int tuner = (rt->input >> 3) & 1; + int sc_in = rt->input & 0x7; + int sc1_out = rt->output & 0xf; + int sc2_out = (rt->output >> 4) & 0xf; + u16 val; + + state->routing = *rt; + if (state->opmode == OPMODE_AUTOSELECT) { + val = msp_read_dem(client, 0x30) & ~0x100; + msp_write_dem(client, 0x30, val | (tuner ? 0x100 : 0)); } else { - state->audmode &= ~V4L2_TUNER_MODE_STEREO; + val = msp_read_dem(client, 0xbb) & ~0x100; + msp_write_dem(client, 0xbb, val | (tuner ? 0x100 : 0)); } - msp_any_set_audmode(client, state->audmode); + msp_set_scart(client, sc_in, 0); + msp_set_scart(client, sc1_out, 1); + msp_set_scart(client, sc2_out, 2); + msp_set_audmode(client); msp_wake_thread(client); break; } @@ -886,7 +712,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) if (state->radio) break; if (state->opmode == OPMODE_AUTOSELECT) - msp_any_detect_stereo(client); + msp_detect_stereo(client); vt->audmode = state->audmode; vt->rxsubchans = state->rxsubchans; vt->capability = V4L2_TUNER_CAP_STEREO | @@ -898,48 +724,11 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *vt = (struct v4l2_tuner *)arg; - if (state->radio) + if (state->radio) /* TODO: add mono/stereo support for radio */ break; + state->audmode = vt->audmode; /* only set audmode */ - if (vt->audmode != -1 && vt->audmode != 0) - msp_any_set_audmode(client, vt->audmode); - break; - } - - case VIDIOC_G_AUDOUT: - { - struct v4l2_audioout *a = (struct v4l2_audioout *)arg; - int idx = a->index; - - memset(a, 0, sizeof(*a)); - - switch (idx) { - case 0: - strcpy(a->name, "Scart1 Out"); - break; - case 1: - strcpy(a->name, "Scart2 Out"); - break; - case 2: - strcpy(a->name, "I2S Out"); - break; - default: - return -EINVAL; - } - break; - - } - - case VIDIOC_S_AUDOUT: - { - struct v4l2_audioout *a = (struct v4l2_audioout *)arg; - - if (a->index < 0 || a->index > 2) - return -EINVAL; - - v4l_dbg(1, msp_debug, client, "Setting audio out on msp34xx to input %i\n", a->index); - msp_set_scart(client, state->in_scart, a->index + 1); - + msp_set_audmode(client); break; } @@ -993,7 +782,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) const char *p; if (state->opmode == OPMODE_AUTOSELECT) - msp_any_detect_stereo(client); + msp_detect_stereo(client); v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n", client->name, state->rev1, state->rev2); v4l_info(client, "Audio: volume %d%s\n", @@ -1020,12 +809,16 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); } else { - v4l_info(client, "Mode: %s\n", p); + if (state->opmode == OPMODE_AUTODETECT) + v4l_info(client, "Mode: %s\n", p); v4l_info(client, "Standard: %s (%s%s)\n", msp_standard_std_name(state->std), (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); } + v4l_info(client, "Audmode: 0x%04x\n", state->audmode); + v4l_info(client, "Routing: 0x%08x (input) 0x%08x (output)\n", + state->routing.input, state->routing.output); v4l_info(client, "ACB: 0x%04x\n", state->acb); break; } @@ -1094,6 +887,7 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind) memset(state, 0, sizeof(*state)); state->v4l2_std = V4L2_STD_NTSC; + state->audmode = V4L2_TUNER_MODE_LANG1; state->volume = 58880; /* 0db gain */ state->balance = 32768; /* 0db gain */ state->bass = 32768; @@ -1103,6 +897,9 @@ static int msp_attach(struct i2c_adapter *adapter, int address, int kind) state->muted = 0; state->i2s_mode = 0; init_waitqueue_head(&state->wq); + /* These are the reset input/output positions */ + state->routing.input = MSP_INPUT_DEFAULT; + state->routing.output = MSP_OUTPUT_DEFAULT; state->rev1 = msp_read_dsp(client, 0x1e); if (state->rev1 != -1) diff --git a/drivers/media/video/msp3400.h b/drivers/media/video/msp3400-driver.h index a9ac57d0700b..1940748bb633 100644 --- a/drivers/media/video/msp3400.h +++ b/drivers/media/video/msp3400-driver.h @@ -1,8 +1,10 @@ /* */ -#ifndef MSP3400_H -#define MSP3400_H +#ifndef MSP3400_DRIVER_H +#define MSP3400_DRIVER_H + +#include <media/msp3400.h> /* ---------------------------------------------------------------------- */ @@ -20,15 +22,14 @@ #define MSP_MODE_BTSC 8 #define MSP_MODE_EXTERN 9 -#define SCART_MASK 0 -#define SCART_IN1 1 -#define SCART_IN2 2 -#define SCART_IN1_DA 3 -#define SCART_IN2_DA 4 -#define SCART_IN3 5 -#define SCART_IN4 6 -#define SCART_MONO 7 -#define SCART_MUTE 8 +#define SCART_IN1 0 +#define SCART_IN2 1 +#define SCART_IN3 2 +#define SCART_IN4 3 +#define SCART_IN1_DA 4 +#define SCART_IN2_DA 5 +#define SCART_MONO 6 +#define SCART_MUTE 7 #define SCART_DSP_IN 0 #define SCART1_OUT 1 @@ -73,7 +74,7 @@ struct msp_state { int i2s_mode; int main, second; /* sound carrier */ int input; - int source; /* see msp34xxg_set_source */ + struct v4l2_routing routing; /* v4l2 */ int audmode; @@ -99,19 +100,16 @@ int msp_reset(struct i2c_client *client); void msp_set_scart(struct i2c_client *client, int in, int out); void msp_set_mute(struct i2c_client *client); void msp_set_audio(struct i2c_client *client); -int msp_modus(struct i2c_client *client); int msp_sleep(struct msp_state *state, int timeout); /* msp3400-kthreads.c */ const char *msp_standard_std_name(int std); -void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2); -void msp3400c_setmode(struct i2c_client *client, int type); -void msp3400c_setstereo(struct i2c_client *client, int mode); -int autodetect_stereo(struct i2c_client *client); +void msp_set_audmode(struct i2c_client *client); +int msp_detect_stereo(struct i2c_client *client); int msp3400c_thread(void *data); int msp3410d_thread(void *data); int msp34xxg_thread(void *data); -void msp34xxg_detect_stereo(struct i2c_client *client); -void msp34xxg_set_audmode(struct i2c_client *client, int audmode); +void msp3400c_set_mode(struct i2c_client *client, int mode); +void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2); -#endif /* MSP3400_H */ +#endif /* MSP3400_DRIVER_H */ diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index 2072c3efebb3..c3984ea9ca07 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -26,10 +26,10 @@ #include <linux/videodev.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> -#include <media/audiochip.h> +#include <media/msp3400.h> #include <linux/kthread.h> #include <linux/suspend.h> -#include "msp3400.h" +#include "msp3400-driver.h" /* this one uses the automatic sound standard detection of newer msp34xx chip versions */ @@ -45,11 +45,13 @@ static struct { { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125), "6.5/6.25 D/K1 Dual FM-Stereo" }, { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875), "6.5/6.74 D/K2 Dual FM-Stereo" }, { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5), "6.5 D/K FM-Mono (HDEV3)" }, + { 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875), "6.5/5.74 D/K3 Dual FM-Stereo" }, { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85), "5.5/5.85 B/G NICAM FM" }, { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 L NICAM AM" }, { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55), "6.0/6.55 I NICAM FM" }, { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM" }, { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV2)" }, + { 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85), "6.5/5.85 D/K NICAM FM (HDEV3)" }, { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Stereo" }, { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M BTSC-Mono + SAP" }, { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5), "4.5 M EIA-J Japan Stereo" }, @@ -109,7 +111,7 @@ static struct msp3400c_init_data_dem { {-2, -8, -10, 10, 50, 86}, {-4, -12, -9, 23, 79, 126}, MSP_CARRIER(6.5), MSP_CARRIER(6.5), - 0x00c6, 0x0140, 0x0120, 0x7c03 + 0x00c6, 0x0140, 0x0120, 0x7c00 }, }; @@ -154,139 +156,150 @@ const char *msp_standard_std_name(int std) return "unknown"; } -void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2) +static void msp_set_source(struct i2c_client *client, u16 src) +{ + struct msp_state *state = i2c_get_clientdata(client); + + if (msp_dolby) { + msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */ + msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */ + } else { + msp_write_dsp(client, 0x0008, src); + msp_write_dsp(client, 0x0009, src); + } + msp_write_dsp(client, 0x000a, src); + msp_write_dsp(client, 0x000b, src); + msp_write_dsp(client, 0x000c, src); + if (state->has_scart23_in_scart2_out) + msp_write_dsp(client, 0x0041, src); +} + +void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2) { msp_write_dem(client, 0x0093, cdo1 & 0xfff); msp_write_dem(client, 0x009b, cdo1 >> 12); msp_write_dem(client, 0x00a3, cdo2 & 0xfff); msp_write_dem(client, 0x00ab, cdo2 >> 12); - msp_write_dem(client, 0x0056, 0); /*LOAD_REG_1/2*/ + msp_write_dem(client, 0x0056, 0); /* LOAD_REG_1/2 */ } -void msp3400c_setmode(struct i2c_client *client, int type) +void msp3400c_set_mode(struct i2c_client *client, int mode) { struct msp_state *state = i2c_get_clientdata(client); + struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode]; + int tuner = (state->routing.input >> 3) & 1; int i; - v4l_dbg(1, msp_debug, client, "setmode: %d\n", type); - state->mode = type; - state->audmode = V4L2_TUNER_MODE_MONO; + v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode); + state->mode = mode; state->rxsubchans = V4L2_TUNER_SUB_MONO; - msp_write_dem(client, 0x00bb, msp3400c_init_data[type].ad_cv); + msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0)); for (i = 5; i >= 0; i--) /* fir 1 */ - msp_write_dem(client, 0x0001, msp3400c_init_data[type].fir1[i]); + msp_write_dem(client, 0x0001, data->fir1[i]); msp_write_dem(client, 0x0005, 0x0004); /* fir 2 */ msp_write_dem(client, 0x0005, 0x0040); msp_write_dem(client, 0x0005, 0x0000); for (i = 5; i >= 0; i--) - msp_write_dem(client, 0x0005, msp3400c_init_data[type].fir2[i]); + msp_write_dem(client, 0x0005, data->fir2[i]); - msp_write_dem(client, 0x0083, msp3400c_init_data[type].mode_reg); + msp_write_dem(client, 0x0083, data->mode_reg); - msp3400c_setcarrier(client, msp3400c_init_data[type].cdo1, - msp3400c_init_data[type].cdo2); + msp3400c_set_carrier(client, data->cdo1, data->cdo2); - msp_write_dem(client, 0x0056, 0); /*LOAD_REG_1/2*/ + msp_set_source(client, data->dsp_src); + /* set prescales */ - if (msp_dolby) { - msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */ - msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */ - msp_write_dsp(client, 0x000b, msp3400c_init_data[type].dsp_src); - } else { - msp_write_dsp(client, 0x0008, msp3400c_init_data[type].dsp_src); - msp_write_dsp(client, 0x0009, msp3400c_init_data[type].dsp_src); - msp_write_dsp(client, 0x000b, msp3400c_init_data[type].dsp_src); - } - msp_write_dsp(client, 0x000a, msp3400c_init_data[type].dsp_src); - msp_write_dsp(client, 0x000e, msp3400c_init_data[type].dsp_matrix); - - if (state->has_nicam) { - /* nicam prescale */ - msp_write_dsp(client, 0x0010, 0x5a00); /* was: 0x3000 */ - } + /* volume prescale for SCART (AM mono input) */ + msp_write_dsp(client, 0x000d, 0x1900); + msp_write_dsp(client, 0x000e, data->dsp_matrix); + if (state->has_nicam) /* nicam prescale */ + msp_write_dsp(client, 0x0010, 0x5a00); } -/* turn on/off nicam + stereo */ -void msp3400c_setstereo(struct i2c_client *client, int mode) +/* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP, + nor do they support stereo BTSC. */ +static void msp3400c_set_audmode(struct i2c_client *client) { - static char *strmode[] = { "mono", "stereo", "lang2", "lang1" }; + static char *strmode[] = { "mono", "stereo", "lang2", "lang1", "lang1+lang2" }; struct msp_state *state = i2c_get_clientdata(client); - int nicam = 0; /* channel source: FM/AM or nicam */ - int src = 0; + char *modestr = (state->audmode >= 0 && state->audmode < 5) ? + strmode[state->audmode] : "unknown"; + int src = 0; /* channel source: FM/AM, nicam or SCART */ if (state->opmode == OPMODE_AUTOSELECT) { /* this method would break everything, let's make sure * it's never called */ - v4l_dbg(1, msp_debug, client, "setstereo called with mode=%d instead of set_source (ignored)\n", - mode); + v4l_dbg(1, msp_debug, client, + "set_audmode called with mode=%d instead of set_source (ignored)\n", + state->audmode); return; } /* switch demodulator */ switch (state->mode) { case MSP_MODE_FM_TERRA: - v4l_dbg(1, msp_debug, client, "FM setstereo: %s\n", strmode[mode]); - msp3400c_setcarrier(client, state->second, state->main); - switch (mode) { + v4l_dbg(1, msp_debug, client, "FM set_audmode: %s\n", modestr); + switch (state->audmode) { case V4L2_TUNER_MODE_STEREO: msp_write_dsp(client, 0x000e, 0x3001); break; case V4L2_TUNER_MODE_MONO: case V4L2_TUNER_MODE_LANG1: case V4L2_TUNER_MODE_LANG2: + case V4L2_TUNER_MODE_LANG1_LANG2: msp_write_dsp(client, 0x000e, 0x3000); break; } break; case MSP_MODE_FM_SAT: - v4l_dbg(1, msp_debug, client, "SAT setstereo: %s\n", strmode[mode]); - switch (mode) { + v4l_dbg(1, msp_debug, client, "SAT set_audmode: %s\n", modestr); + switch (state->audmode) { case V4L2_TUNER_MODE_MONO: - msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5)); + msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5)); break; case V4L2_TUNER_MODE_STEREO: - msp3400c_setcarrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02)); + case V4L2_TUNER_MODE_LANG1_LANG2: + msp3400c_set_carrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02)); break; case V4L2_TUNER_MODE_LANG1: - msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); + msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); break; case V4L2_TUNER_MODE_LANG2: - msp3400c_setcarrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); + msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02)); break; } break; case MSP_MODE_FM_NICAM1: case MSP_MODE_FM_NICAM2: case MSP_MODE_AM_NICAM: - v4l_dbg(1, msp_debug, client, "NICAM setstereo: %s\n",strmode[mode]); - msp3400c_setcarrier(client,state->second,state->main); + v4l_dbg(1, msp_debug, client, "NICAM set_audmode: %s\n",modestr); if (state->nicam_on) - nicam=0x0100; + src = 0x0100; /* NICAM */ break; case MSP_MODE_BTSC: - v4l_dbg(1, msp_debug, client, "BTSC setstereo: %s\n",strmode[mode]); - nicam=0x0300; + v4l_dbg(1, msp_debug, client, "BTSC set_audmode: %s\n",modestr); break; case MSP_MODE_EXTERN: - v4l_dbg(1, msp_debug, client, "extern setstereo: %s\n",strmode[mode]); - nicam = 0x0200; + v4l_dbg(1, msp_debug, client, "extern set_audmode: %s\n",modestr); + src = 0x0200; /* SCART */ break; case MSP_MODE_FM_RADIO: - v4l_dbg(1, msp_debug, client, "FM-Radio setstereo: %s\n",strmode[mode]); + v4l_dbg(1, msp_debug, client, "FM-Radio set_audmode: %s\n",modestr); break; default: - v4l_dbg(1, msp_debug, client, "mono setstereo\n"); + v4l_dbg(1, msp_debug, client, "mono set_audmode\n"); return; } /* switch audio */ - switch (mode) { + switch (state->audmode) { case V4L2_TUNER_MODE_STEREO: - src = 0x0020 | nicam; + case V4L2_TUNER_MODE_LANG1_LANG2: + src |= 0x0020; break; case V4L2_TUNER_MODE_MONO: if (state->mode == MSP_MODE_AM_NICAM) { @@ -297,29 +310,22 @@ void msp3400c_setstereo(struct i2c_client *client, int mode) src = 0x0200; break; } + if (state->rxsubchans & V4L2_TUNER_SUB_STEREO) + src = 0x0030; + break; case V4L2_TUNER_MODE_LANG1: - src = 0x0000 | nicam; + /* switch to stereo for stereo transmission, otherwise + keep first language */ + if (state->rxsubchans & V4L2_TUNER_SUB_STEREO) + src |= 0x0020; break; case V4L2_TUNER_MODE_LANG2: - src = 0x0010 | nicam; + src |= 0x0010; break; } - v4l_dbg(1, msp_debug, client, "setstereo final source/matrix = 0x%x\n", src); + v4l_dbg(1, msp_debug, client, "set_audmode final source/matrix = 0x%x\n", src); - if (msp_dolby) { - msp_write_dsp(client, 0x0008, 0x0520); - msp_write_dsp(client, 0x0009, 0x0620); - msp_write_dsp(client, 0x000a, src); - msp_write_dsp(client, 0x000b, src); - } else { - msp_write_dsp(client, 0x0008, src); - msp_write_dsp(client, 0x0009, src); - msp_write_dsp(client, 0x000a, src); - msp_write_dsp(client, 0x000b, src); - msp_write_dsp(client, 0x000c, src); - if (state->has_scart23_in_scart2_out) - msp_write_dsp(client, 0x0041, src); - } + msp_set_source(client, src); } static void msp3400c_print_mode(struct i2c_client *client) @@ -347,12 +353,12 @@ static void msp3400c_print_mode(struct i2c_client *client) /* ----------------------------------------------------------------------- */ -int autodetect_stereo(struct i2c_client *client) +static int msp3400c_detect_stereo(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); int val; int rxsubchans = state->rxsubchans; - int newnicam = state->nicam_on; + int newnicam = state->nicam_on; int update = 0; switch (state->mode) { @@ -362,7 +368,7 @@ int autodetect_stereo(struct i2c_client *client) val -= 65536; v4l_dbg(2, msp_debug, client, "stereo detect register: %d\n", val); if (val > 4096) { - rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; + rxsubchans = V4L2_TUNER_SUB_STEREO; } else if (val < -4096) { rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; } else { @@ -386,14 +392,11 @@ int autodetect_stereo(struct i2c_client *client) break; case 1: case 9: - rxsubchans = V4L2_TUNER_SUB_MONO - | V4L2_TUNER_SUB_LANG1; + rxsubchans = V4L2_TUNER_SUB_MONO; break; case 2: case 10: - rxsubchans = V4L2_TUNER_SUB_MONO - | V4L2_TUNER_SUB_LANG1 - | V4L2_TUNER_SUB_LANG2; + rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; break; default: rxsubchans = V4L2_TUNER_SUB_MONO; @@ -405,30 +408,17 @@ int autodetect_stereo(struct i2c_client *client) rxsubchans = V4L2_TUNER_SUB_MONO; } break; - case MSP_MODE_BTSC: - val = msp_read_dem(client, 0x200); - v4l_dbg(2, msp_debug, client, "status=0x%x (pri=%s, sec=%s, %s%s%s)\n", - val, - (val & 0x0002) ? "no" : "yes", - (val & 0x0004) ? "no" : "yes", - (val & 0x0040) ? "stereo" : "mono", - (val & 0x0080) ? ", nicam 2nd mono" : "", - (val & 0x0100) ? ", bilingual/SAP" : ""); - rxsubchans = V4L2_TUNER_SUB_MONO; - if (val & 0x0040) rxsubchans |= V4L2_TUNER_SUB_STEREO; - if (val & 0x0100) rxsubchans |= V4L2_TUNER_SUB_LANG1; - break; } if (rxsubchans != state->rxsubchans) { update = 1; - v4l_dbg(1, msp_debug, client, "watch: rxsubchans %d => %d\n", - state->rxsubchans,rxsubchans); + v4l_dbg(1, msp_debug, client, "watch: rxsubchans %02x => %02x\n", + state->rxsubchans, rxsubchans); state->rxsubchans = rxsubchans; } if (newnicam != state->nicam_on) { update = 1; v4l_dbg(1, msp_debug, client, "watch: nicam %d => %d\n", - state->nicam_on,newnicam); + state->nicam_on, newnicam); state->nicam_on = newnicam; } return update; @@ -443,13 +433,8 @@ static void watch_stereo(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - if (autodetect_stereo(client)) { - if (state->rxsubchans & V4L2_TUNER_SUB_STEREO) - msp3400c_setstereo(client, V4L2_TUNER_MODE_STEREO); - else if (state->rxsubchans & V4L2_TUNER_SUB_LANG1) - msp3400c_setstereo(client, V4L2_TUNER_MODE_LANG1); - else - msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); + if (msp_detect_stereo(client)) { + msp_set_audmode(client); } if (msp_once) @@ -461,7 +446,7 @@ int msp3400c_thread(void *data) struct i2c_client *client = data; struct msp_state *state = i2c_get_clientdata(client); struct msp3400c_carrier_detect *cd; - int count, max1,max2,val1,val2, val,this; + int count, max1, max2, val1, val2, val, this; v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n"); @@ -471,7 +456,7 @@ int msp3400c_thread(void *data) v4l_dbg(2, msp_debug, client, "msp3400 thread: wakeup\n"); restart: - v4l_dbg(1, msp_debug, client, "thread: restart scan\n"); + v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); state->restart = 0; if (kthread_should_stop()) break; @@ -485,13 +470,14 @@ int msp3400c_thread(void *data) /* mute */ msp_set_mute(client); - msp3400c_setmode(client, MSP_MODE_AM_DETECT /* +1 */ ); + msp3400c_set_mode(client, MSP_MODE_AM_DETECT); val1 = val2 = 0; max1 = max2 = -1; state->watch_stereo = 0; + state->nicam_on = 0; /* some time for the tuner to sync */ - if (msp_sleep(state,200)) + if (msp_sleep(state, 200)) goto restart; /* carrier detect pass #1 -- main carrier */ @@ -506,7 +492,7 @@ int msp3400c_thread(void *data) } for (this = 0; this < count; this++) { - msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo); + msp3400c_set_carrier(client, cd[this].cdo, cd[this].cdo); if (msp_sleep(state,100)) goto restart; val = msp_read_dsp(client, 0x1b); @@ -542,7 +528,7 @@ int msp3400c_thread(void *data) max2 = 0; } for (this = 0; this < count; this++) { - msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo); + msp3400c_set_carrier(client, cd[this].cdo, cd[this].cdo); if (msp_sleep(state,100)) goto restart; val = msp_read_dsp(client, 0x1b); @@ -554,22 +540,20 @@ int msp3400c_thread(void *data) } /* program the msp3400 according to the results */ - state->main = msp3400c_carrier_detect_main[max1].cdo; + state->main = msp3400c_carrier_detect_main[max1].cdo; switch (max1) { case 1: /* 5.5 */ if (max2 == 0) { /* B/G FM-stereo */ state->second = msp3400c_carrier_detect_55[max2].cdo; - msp3400c_setmode(client, MSP_MODE_FM_TERRA); - state->nicam_on = 0; - msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); state->watch_stereo = 1; } else if (max2 == 1 && state->has_nicam) { /* B/G NICAM */ state->second = msp3400c_carrier_detect_55[max2].cdo; - msp3400c_setmode(client, MSP_MODE_FM_NICAM1); + msp3400c_set_mode(client, MSP_MODE_FM_NICAM1); + msp3400c_set_carrier(client, state->second, state->main); state->nicam_on = 1; - msp3400c_setcarrier(client, state->second, state->main); state->watch_stereo = 1; } else { goto no_second; @@ -578,35 +562,29 @@ int msp3400c_thread(void *data) case 2: /* 6.0 */ /* PAL I NICAM */ state->second = MSP_CARRIER(6.552); - msp3400c_setmode(client, MSP_MODE_FM_NICAM2); + msp3400c_set_mode(client, MSP_MODE_FM_NICAM2); + msp3400c_set_carrier(client, state->second, state->main); state->nicam_on = 1; - msp3400c_setcarrier(client, state->second, state->main); state->watch_stereo = 1; break; case 3: /* 6.5 */ if (max2 == 1 || max2 == 2) { /* D/K FM-stereo */ state->second = msp3400c_carrier_detect_65[max2].cdo; - msp3400c_setmode(client, MSP_MODE_FM_TERRA); - state->nicam_on = 0; - msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); state->watch_stereo = 1; } else if (max2 == 0 && (state->v4l2_std & V4L2_STD_SECAM)) { /* L NICAM or AM-mono */ state->second = msp3400c_carrier_detect_65[max2].cdo; - msp3400c_setmode(client, MSP_MODE_AM_NICAM); - state->nicam_on = 0; - msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); - msp3400c_setcarrier(client, state->second, state->main); - /* volume prescale for SCART (AM mono input) */ - msp_write_dsp(client, 0x000d, 0x1900); + msp3400c_set_mode(client, MSP_MODE_AM_NICAM); + msp3400c_set_carrier(client, state->second, state->main); state->watch_stereo = 1; } else if (max2 == 0 && state->has_nicam) { /* D/K NICAM */ state->second = msp3400c_carrier_detect_65[max2].cdo; - msp3400c_setmode(client, MSP_MODE_FM_NICAM1); + msp3400c_set_mode(client, MSP_MODE_FM_NICAM1); + msp3400c_set_carrier(client, state->second, state->main); state->nicam_on = 1; - msp3400c_setcarrier(client, state->second, state->main); state->watch_stereo = 1; } else { goto no_second; @@ -616,23 +594,25 @@ int msp3400c_thread(void *data) default: no_second: state->second = msp3400c_carrier_detect_main[max1].cdo; - msp3400c_setmode(client, MSP_MODE_FM_TERRA); - state->nicam_on = 0; - msp3400c_setcarrier(client, state->second, state->main); + msp3400c_set_mode(client, MSP_MODE_FM_TERRA); + msp3400c_set_carrier(client, state->second, state->main); state->rxsubchans = V4L2_TUNER_SUB_MONO; - msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); break; } /* unmute */ msp_set_audio(client); + msp3400c_set_audmode(client); if (msp_debug) msp3400c_print_mode(client); - /* monitor tv audio mode */ + /* monitor tv audio mode, the first time don't wait + so long to get a quick stereo/bilingual result */ + if (msp_sleep(state, 1000)) + goto restart; while (state->watch_stereo) { - if (msp_sleep(state,5000)) + if (msp_sleep(state, 5000)) goto restart; watch_stereo(client); } @@ -656,7 +636,7 @@ int msp3410d_thread(void *data) v4l_dbg(2, msp_debug, client, "msp3410 thread: wakeup\n"); restart: - v4l_dbg(1, msp_debug, client, "thread: restart scan\n"); + v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); state->restart = 0; if (kthread_should_stop()) break; @@ -675,15 +655,17 @@ int msp3410d_thread(void *data) if (msp_sleep(state,200)) goto restart; - /* start autodetect */ + /* start autodetect. Note: autodetect is not supported for + NTSC-M and radio, hence we force the standard in those cases. */ if (state->radio) std = 0x40; else std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1; state->watch_stereo = 0; + state->nicam_on = 0; if (msp_debug) - v4l_dbg(1, msp_debug, client, "setting standard: %s (0x%04x)\n", + v4l_dbg(2, msp_debug, client, "setting standard: %s (0x%04x)\n", msp_standard_std_name(std), std); if (std != 1) { @@ -700,7 +682,7 @@ int msp3410d_thread(void *data) val = msp_read_dem(client, 0x7e); if (val < 0x07ff) break; - v4l_dbg(1, msp_debug, client, "detection still in progress\n"); + v4l_dbg(2, msp_debug, client, "detection still in progress\n"); } } for (i = 0; msp_stdlist[i].name != NULL; i++) @@ -718,84 +700,79 @@ int msp3410d_thread(void *data) v4l_dbg(1, msp_debug, client, "autodetection failed," " switching to backup standard: %s (0x%04x)\n", msp_stdlist[8].name ? msp_stdlist[8].name : "unknown",val); - val = 0x0009; + state->std = val = 0x0009; msp_write_dem(client, 0x20, val); } - /* set various prescales */ - msp_write_dsp(client, 0x0d, 0x1900); /* scart */ - msp_write_dsp(client, 0x0e, 0x2403); /* FM */ - msp_write_dsp(client, 0x10, 0x5a00); /* nicam */ - /* set stereo */ switch (val) { case 0x0008: /* B/G NICAM */ case 0x000a: /* I NICAM */ - if (val == 0x0008) - state->mode = MSP_MODE_FM_NICAM1; - else + case 0x000b: /* D/K NICAM */ + if (val == 0x000a) state->mode = MSP_MODE_FM_NICAM2; + else + state->mode = MSP_MODE_FM_NICAM1; /* just turn on stereo */ state->rxsubchans = V4L2_TUNER_SUB_STEREO; state->nicam_on = 1; state->watch_stereo = 1; - msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO); break; case 0x0009: state->mode = MSP_MODE_AM_NICAM; state->rxsubchans = V4L2_TUNER_SUB_MONO; state->nicam_on = 1; - msp3400c_setstereo(client,V4L2_TUNER_MODE_MONO); state->watch_stereo = 1; break; case 0x0020: /* BTSC */ - /* just turn on stereo */ + /* The pre-'G' models only have BTSC-mono */ state->mode = MSP_MODE_BTSC; - state->rxsubchans = V4L2_TUNER_SUB_STEREO; - state->nicam_on = 0; - state->watch_stereo = 1; - msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO); + state->rxsubchans = V4L2_TUNER_SUB_MONO; break; case 0x0040: /* FM radio */ state->mode = MSP_MODE_FM_RADIO; state->rxsubchans = V4L2_TUNER_SUB_STEREO; - state->audmode = V4L2_TUNER_MODE_STEREO; - state->nicam_on = 0; - state->watch_stereo = 0; /* not needed in theory if we have radio, but short programming enables carrier mute */ - msp3400c_setmode(client, MSP_MODE_FM_RADIO); - msp3400c_setcarrier(client, MSP_CARRIER(10.7), + msp3400c_set_mode(client, MSP_MODE_FM_RADIO); + msp3400c_set_carrier(client, MSP_CARRIER(10.7), MSP_CARRIER(10.7)); - /* scart routing */ + /* scart routing (this doesn't belong here I think) */ msp_set_scart(client,SCART_IN2,0); - /* msp34xx does radio decoding */ - msp_write_dsp(client, 0x08, 0x0020); - msp_write_dsp(client, 0x09, 0x0020); - msp_write_dsp(client, 0x0b, 0x0020); break; + case 0x0002: case 0x0003: case 0x0004: case 0x0005: state->mode = MSP_MODE_FM_TERRA; state->rxsubchans = V4L2_TUNER_SUB_MONO; - state->audmode = V4L2_TUNER_MODE_MONO; - state->nicam_on = 0; state->watch_stereo = 1; break; } + /* set various prescales */ + msp_write_dsp(client, 0x0d, 0x1900); /* scart */ + msp_write_dsp(client, 0x0e, 0x3000); /* FM */ + if (state->has_nicam) + msp_write_dsp(client, 0x10, 0x5a00); /* nicam */ + + if (state->has_i2s_conf) + msp_write_dem(client, 0x40, state->i2s_mode); + /* unmute, restore misc registers */ msp_set_audio(client); + msp_write_dsp(client, 0x13, state->acb); - if (state->has_i2s_conf) - msp_write_dem(client, 0x40, state->i2s_mode); + msp3400c_set_audmode(client); - /* monitor tv audio mode */ + /* monitor tv audio mode, the first time don't wait + so long to get a quick stereo/bilingual result */ + if (msp_sleep(state, 1000)) + goto restart; while (state->watch_stereo) { - if (msp_sleep(state,5000)) - goto restart; watch_stereo(client); + if (msp_sleep(state, 5000)) + goto restart; } } v4l_dbg(1, msp_debug, client, "thread: exit\n"); @@ -804,102 +781,154 @@ int msp3410d_thread(void *data) /* ----------------------------------------------------------------------- */ -/* msp34xxG + (autoselect no-thread) */ -/* this one uses both automatic standard detection and automatic sound */ -/* select which are available in the newer G versions */ -/* struct msp: only norm, acb and source are really used in this mode */ - -/* set the same 'source' for the loudspeaker, scart and quasi-peak detector - * the value for source is the same as bit 15:8 of DSP registers 0x08, - * 0x0a and 0x0c: 0=mono, 1=stereo or A|B, 2=SCART, 3=stereo or A, 4=stereo or B - * - * this function replaces msp3400c_setstereo +/* msp34xxG + (autoselect no-thread) + * this one uses both automatic standard detection and automatic sound + * select which are available in the newer G versions + * struct msp: only norm, acb and source are really used in this mode */ -static void msp34xxg_set_source(struct i2c_client *client, int source) + +static int msp34xxg_modus(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - /* fix matrix mode to stereo and let the msp choose what - * to output according to 'source', as recommended - * for MONO (source==0) downmixing set bit[7:0] to 0x30 - */ - int value = (source & 0x07) << 8 | (source == 0 ? 0x30 : 0x20); - - v4l_dbg(1, msp_debug, client, "set source to %d (0x%x)\n", source, value); - /* Loudspeaker Output */ - msp_write_dsp(client, 0x08, value); - /* SCART1 DA Output */ - msp_write_dsp(client, 0x0a, value); - /* Quasi-peak detector */ - msp_write_dsp(client, 0x0c, value); - /* - * set identification threshold. Personally, I - * I set it to a higher value that the default - * of 0x190 to ignore noisy stereo signals. - * this needs tuning. (recommended range 0x00a0-0x03c0) - * 0x7f0 = forced mono mode - */ - /* a2 threshold for stereo/bilingual */ - msp_write_dem(client, 0x22, msp_stereo_thresh); - state->source = source; + if (state->radio) { + v4l_dbg(1, msp_debug, client, "selected radio modus\n"); + return 0x0001; + } + + if (state->v4l2_std & V4L2_STD_PAL) { + v4l_dbg(1, msp_debug, client, "selected PAL modus\n"); + return 0x7001; + } + if (state->v4l2_std == V4L2_STD_NTSC_M_JP) { + v4l_dbg(1, msp_debug, client, "selected M (EIA-J) modus\n"); + return 0x4001; + } + if (state->v4l2_std == V4L2_STD_NTSC_M_KR) { + v4l_dbg(1, msp_debug, client, "selected M (A2) modus\n"); + return 0x0001; + } + if (state->v4l2_std & V4L2_STD_MN) { + v4l_dbg(1, msp_debug, client, "selected M (BTSC) modus\n"); + return 0x2001; + } + if (state->v4l2_std & V4L2_STD_SECAM) { + v4l_dbg(1, msp_debug, client, "selected SECAM modus\n"); + return 0x6001; + } + return 0x0001; } -/* (re-)initialize the msp34xxg, according to the current norm in state->norm - * return 0 if it worked, -1 if it failed - */ -static int msp34xxg_reset(struct i2c_client *client) +static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) + { + struct msp_state *state = i2c_get_clientdata(client); + int source, matrix; + + switch (state->audmode) { + case V4L2_TUNER_MODE_MONO: + source = 0; /* mono only */ + matrix = 0x30; + break; + case V4L2_TUNER_MODE_LANG1: + source = 3; /* stereo or A */ + matrix = 0x00; + break; + case V4L2_TUNER_MODE_LANG2: + source = 4; /* stereo or B */ + matrix = 0x10; + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + default: + source = 1; /* stereo or A|B */ + matrix = 0x20; + break; + } + + if (in == MSP_DSP_OUT_TUNER) + source = (source << 8) | 0x20; + /* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14 + instead of 11, 12, 13. So we add one for that msp version. */ + else if (in >= MSP_DSP_OUT_MAIN_AVC && state->has_dolby_pro_logic) + source = ((in + 1) << 8) | matrix; + else + source = (in << 8) | matrix; + + v4l_dbg(1, msp_debug, client, "set source to %d (0x%x) for output %02x\n", + in, source, reg); + msp_write_dsp(client, reg, source); +} + +static void msp34xxg_set_sources(struct i2c_client *client) +{ + struct msp_state *state = i2c_get_clientdata(client); + u32 in = state->routing.input; + + msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf); + /* quasi-peak detector is set to same input as the loudspeaker (MAIN) */ + msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf); + msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf); + msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf); + if (state->has_scart23_in_scart2_out) + msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf); + msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf); +} + +/* (re-)initialize the msp34xxg */ +static void msp34xxg_reset(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - int modus, std; + int tuner = (state->routing.input >> 3) & 1; + int modus; - if (msp_reset(client)) - return -1; + /* initialize std to 1 (autodetect) to signal that no standard is + selected yet. */ + state->std = 1; + + msp_reset(client); /* make sure that input/output is muted (paranoid mode) */ /* ACB, mute DSP input, mute SCART 1 */ - if (msp_write_dsp(client, 0x13, 0x0f20)) - return -1; + msp_write_dsp(client, 0x13, 0x0f20); if (state->has_i2s_conf) msp_write_dem(client, 0x40, state->i2s_mode); /* step-by-step initialisation, as described in the manual */ - modus = msp_modus(client); - if (state->radio) - std = 0x40; - else - std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1; - modus &= ~0x03; /* STATUS_CHANGE = 0 */ - modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION = 1 */ - if (msp_write_dem(client, 0x30, modus)) - return -1; - if (msp_write_dem(client, 0x20, std)) - return -1; + modus = msp34xxg_modus(client); + modus |= tuner ? 0x100 : 0; + msp_write_dem(client, 0x30, modus); /* write the dsps that may have an influence on standard/audio autodetection right now */ - msp34xxg_set_source(client, state->source); - - /* AM/FM Prescale [15:8] 75khz deviation */ - if (msp_write_dsp(client, 0x0e, 0x3000)) - return -1; + msp34xxg_set_sources(client); - /* NICAM Prescale 9db gain (as recommended) */ - if (msp_write_dsp(client, 0x10, 0x5a00)) - return -1; + msp_write_dsp(client, 0x0d, 0x1900); /* scart */ + msp_write_dsp(client, 0x0e, 0x3000); /* FM */ + if (state->has_nicam) + msp_write_dsp(client, 0x10, 0x5a00); /* nicam */ - return 0; + /* set identification threshold. Personally, I + * I set it to a higher value than the default + * of 0x190 to ignore noisy stereo signals. + * this needs tuning. (recommended range 0x00a0-0x03c0) + * 0x7f0 = forced mono mode + * + * a2 threshold for stereo/bilingual. + * Note: this register is part of the Manual/Compatibility mode. + * It is supported by all 'G'-family chips. + */ + msp_write_dem(client, 0x22, msp_stereo_thresh); } int msp34xxg_thread(void *data) { struct i2c_client *client = data; struct msp_state *state = i2c_get_clientdata(client); - int val, std, i; + int val, i; v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n"); - state->source = 1; /* default */ for (;;) { v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n"); msp_sleep(state, -1); @@ -913,12 +942,14 @@ int msp34xxg_thread(void *data) /* setup the chip*/ msp34xxg_reset(client); - std = msp_standard; - if (std != 0x01) + state->std = state->radio ? 0x40 : msp_standard; + if (state->std != 1) goto unmute; + /* start autodetect */ + msp_write_dem(client, 0x20, state->std); /* watch autodetect */ - v4l_dbg(1, msp_debug, client, "triggered autodetect, waiting for result\n"); + v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n"); for (i = 0; i < 10; i++) { if (msp_sleep(state, 100)) goto restart; @@ -926,20 +957,19 @@ int msp34xxg_thread(void *data) /* check results */ val = msp_read_dem(client, 0x7e); if (val < 0x07ff) { - std = val; + state->std = val; break; } v4l_dbg(2, msp_debug, client, "detection still in progress\n"); } - if (std == 1) { + if (state->std == 1) { v4l_dbg(1, msp_debug, client, "detection still in progress after 10 tries. giving up.\n"); continue; } unmute: - state->std = std; - v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n", - msp_standard_std_name(std), std); + v4l_dbg(1, msp_debug, client, "detected standard: %s (0x%04x)\n", + msp_standard_std_name(state->std), state->std); /* unmute: dispatch sound to scart output, set scart volume */ msp_set_audio(client); @@ -948,63 +978,93 @@ int msp34xxg_thread(void *data) if (msp_write_dsp(client, 0x13, state->acb)) return -1; - msp_write_dem(client, 0x40, state->i2s_mode); + /* the periodic stereo/SAP check is only relevant for + the 0x20 standard (BTSC) */ + if (state->std != 0x20) + continue; + + state->watch_stereo = 1; + + /* monitor tv audio mode, the first time don't wait + in order to get a quick stereo/SAP update */ + watch_stereo(client); + while (state->watch_stereo) { + watch_stereo(client); + if (msp_sleep(state, 5000)) + goto restart; + } } v4l_dbg(1, msp_debug, client, "thread: exit\n"); return 0; } -void msp34xxg_detect_stereo(struct i2c_client *client) +static int msp34xxg_detect_stereo(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - int status = msp_read_dem(client, 0x0200); int is_bilingual = status & 0x100; int is_stereo = status & 0x40; + int oldrx = state->rxsubchans; state->rxsubchans = 0; if (is_stereo) - state->rxsubchans |= V4L2_TUNER_SUB_STEREO; + state->rxsubchans = V4L2_TUNER_SUB_STEREO; else - state->rxsubchans |= V4L2_TUNER_SUB_MONO; + state->rxsubchans = V4L2_TUNER_SUB_MONO; if (is_bilingual) { - state->rxsubchans |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; - /* I'm supposed to check whether it's SAP or not - * and set only LANG2/SAP in this case. Yet, the MSP - * does a lot of work to hide this and handle everything - * the same way. I don't want to work around it so unless - * this is a problem, I'll handle SAP just like lang1/lang2. - */ + if (state->std == 0x20) + state->rxsubchans |= V4L2_TUNER_SUB_SAP; + else + state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; } v4l_dbg(1, msp_debug, client, "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n", status, is_stereo, is_bilingual, state->rxsubchans); + return (oldrx != state->rxsubchans); } -void msp34xxg_set_audmode(struct i2c_client *client, int audmode) +static void msp34xxg_set_audmode(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - int source; - switch (audmode) { - case V4L2_TUNER_MODE_MONO: - source = 0; /* mono only */ - break; - case V4L2_TUNER_MODE_STEREO: - source = 1; /* stereo or A|B, see comment in msp34xxg_get_v4l2_stereo() */ - /* problem: that could also mean 2 (scart input) */ - break; - case V4L2_TUNER_MODE_LANG1: - source = 3; /* stereo or A */ - break; - case V4L2_TUNER_MODE_LANG2: - source = 4; /* stereo or B */ + if (state->std == 0x20) { + if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) && + (state->audmode == V4L2_TUNER_MODE_STEREO || + state->audmode == V4L2_TUNER_MODE_LANG2)) { + msp_write_dem(client, 0x20, 0x21); + } else { + msp_write_dem(client, 0x20, 0x20); + } + } + + msp34xxg_set_sources(client); +} + +void msp_set_audmode(struct i2c_client *client) +{ + struct msp_state *state = i2c_get_clientdata(client); + + switch (state->opmode) { + case OPMODE_MANUAL: + case OPMODE_AUTODETECT: + msp3400c_set_audmode(client); break; - default: - audmode = 0; - source = 1; + case OPMODE_AUTOSELECT: + msp34xxg_set_audmode(client); break; } - state->audmode = audmode; - msp34xxg_set_source(client, source); +} + +int msp_detect_stereo(struct i2c_client *client) +{ + struct msp_state *state = i2c_get_clientdata(client); + + switch (state->opmode) { + case OPMODE_MANUAL: + case OPMODE_AUTODETECT: + return msp3400c_detect_stereo(client); + case OPMODE_AUTOSELECT: + return msp34xxg_detect_stereo(client); + } + return 0; } diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index 41715cacf926..b0aea4002d11 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -1,11 +1,11 @@ /* mxb - v4l2 driver for the Multimedia eXtension Board - + Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de> Visit http://www.mihu.de/linux/saa7146/mxb/ for further details about this card. - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or @@ -35,12 +35,12 @@ #define I2C_SAA7111 0x24 -#define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) +#define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) /* global variable */ static int mxb_num = 0; -/* initial frequence the tuner will be tuned to. +/* initial frequence the tuner will be tuned to. in verden (lower saxony, germany) 4148 is a channel called "phoenix" */ static int freq = 4148; @@ -55,7 +55,7 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); enum { TUNER, AUX1, AUX3, AUX3_YC }; static struct v4l2_input mxb_inputs[MXB_INPUTS] = { - { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, + { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, { AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, { AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, { AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 }, @@ -66,7 +66,7 @@ static struct v4l2_input mxb_inputs[MXB_INPUTS] = { static struct { int hps_source; int hps_sync; -} input_port_selection[MXB_INPUTS] = { +} input_port_selection[MXB_INPUTS] = { { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, @@ -81,7 +81,7 @@ static int video_audio_connect[MXB_INPUTS] = /* these are the necessary input-output-pins for bringing one audio source (see above) to the CD-output */ static struct tea6420_multiplex TEA6420_cd[MXB_AUDIOS+1][2] = - { + { {{1,1,0},{1,1,0}}, /* Tuner */ {{5,1,0},{6,1,0}}, /* AUX 1 */ {{4,1,0},{6,1,0}}, /* AUX 2 */ @@ -122,8 +122,8 @@ static struct saa7146_extension_ioctls ioctls[] = { { VIDIOC_S_FREQUENCY, SAA7146_EXCLUSIVE }, { VIDIOC_G_AUDIO, SAA7146_EXCLUSIVE }, { VIDIOC_S_AUDIO, SAA7146_EXCLUSIVE }, - { MXB_S_AUDIO_CD, SAA7146_EXCLUSIVE }, /* custom control */ - { MXB_S_AUDIO_LINE, SAA7146_EXCLUSIVE }, /* custom control */ + { MXB_S_AUDIO_CD, SAA7146_EXCLUSIVE }, /* custom control */ + { MXB_S_AUDIO_LINE, SAA7146_EXCLUSIVE }, /* custom control */ { 0, 0 } }; @@ -132,7 +132,7 @@ struct mxb struct video_device *video_dev; struct video_device *vbi_dev; - struct i2c_adapter i2c_adapter; + struct i2c_adapter i2c_adapter; struct i2c_client* saa7111a; struct i2c_client* tda9840; @@ -198,17 +198,17 @@ static int mxb_probe(struct saa7146_dev* dev) /* loop through all i2c-devices on the bus and look who is there */ list_for_each(item,&mxb->i2c_adapter.clients) { client = list_entry(item, struct i2c_client, list); - if( I2C_TEA6420_1 == client->addr ) + if( I2C_ADDR_TEA6420_1 == client->addr ) mxb->tea6420_1 = client; - if( I2C_TEA6420_2 == client->addr ) + if( I2C_ADDR_TEA6420_2 == client->addr ) mxb->tea6420_2 = client; - if( I2C_TEA6415C_2 == client->addr ) + if( I2C_TEA6415C_2 == client->addr ) mxb->tea6415c = client; - if( I2C_TDA9840 == client->addr ) + if( I2C_ADDR_TDA9840 == client->addr ) mxb->tda9840 = client; if( I2C_SAA7111 == client->addr ) mxb->saa7111a = client; - if( 0x60 == client->addr ) + if( 0x60 == client->addr ) mxb->tuner = client; } @@ -222,7 +222,7 @@ static int mxb_probe(struct saa7146_dev* dev) return -ENODEV; } - /* all devices are present, probe was successful */ + /* all devices are present, probe was successful */ /* we store the pointer in our private data field */ dev->ext_priv = mxb; @@ -230,7 +230,7 @@ static int mxb_probe(struct saa7146_dev* dev) return 0; } -/* some init data for the saa7740, the so-called 'sound arena module'. +/* some init data for the saa7740, the so-called 'sound arena module'. there are no specs available, so we simply use some init values */ static struct { int length; @@ -330,7 +330,7 @@ static int mxb_init_done(struct saa7146_dev* dev) v4l2_std_id std = V4L2_STD_PAL_BG; int i = 0, err = 0; - struct tea6415c_multiplex vm; + struct tea6415c_multiplex vm; /* select video mode in saa7111a */ i = VIDEO_MODE_PAL; @@ -380,16 +380,16 @@ static int mxb_init_done(struct saa7146_dev* dev) vm.in = 3; vm.out = 13; mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm); - + /* the rest for mxb */ mxb->cur_input = 0; mxb->cur_mute = 1; mxb->cur_mode = V4L2_TUNER_MODE_STEREO; mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &mxb->cur_mode); - + /* check if the saa7740 (aka 'sound arena module') is present - on the mxb. if so, we must initialize it. due to lack of + on the mxb. if so, we must initialize it. due to lack of informations about the saa7740, the values were reverse engineered. */ msg.addr = 0x1b; @@ -409,7 +409,7 @@ static int mxb_init_done(struct saa7146_dev* dev) break; } - msg.len = mxb_saa7740_init[i].length; + msg.len = mxb_saa7740_init[i].length; msg.buf = &mxb_saa7740_init[i].data[0]; if( 1 != (err = i2c_transfer(&mxb->i2c_adapter, &msg, 1))) { DEB_D(("failed to initialize 'sound arena module'.\n")); @@ -418,12 +418,12 @@ static int mxb_init_done(struct saa7146_dev* dev) } INFO(("'sound arena module' detected.\n")); } -err: +err: /* the rest for saa7146: you should definitely set some basic values for the input-port handling of the saa7146. */ /* ext->saa has been filled by the core driver */ - + /* some stuff is done via variables */ saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, input_port_selection[mxb->cur_input].hps_sync); @@ -431,7 +431,7 @@ err: /* this is ugly, but because of the fact that this is completely hardware dependend, it should be done directly... */ - saa7146_write(dev, DD1_STREAM_B, 0x00000000); + saa7146_write(dev, DD1_STREAM_B, 0x00000000); saa7146_write(dev, DD1_INIT, 0x02000200); saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); @@ -453,7 +453,7 @@ static struct saa7146_ext_vv vv_data; static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) { struct mxb* mxb = (struct mxb*)dev->ext_priv; - + DEB_EE(("dev:%p\n",dev)); /* checking for i2c-devices can be omitted here, because we @@ -464,7 +464,7 @@ static int mxb_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data ERR(("cannot register capture v4l2 device. skipping.\n")); return -1; } - + /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ if( 0 != MXB_BOARD_CAN_DO_VBI(dev)) { if( 0 != saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { @@ -513,17 +513,17 @@ static int mxb_detach(struct saa7146_dev* dev) return 0; } -static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) +static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct saa7146_dev *dev = fh->dev; struct mxb* mxb = (struct mxb*)dev->ext_priv; - struct saa7146_vv *vv = dev->vv_data; - + struct saa7146_vv *vv = dev->vv_data; + switch(cmd) { case VIDIOC_ENUMINPUT: { struct v4l2_input *i = arg; - + DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index)); if( i->index < 0 || i->index >= MXB_INPUTS) { return -EINVAL; @@ -559,11 +559,11 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) break; } } - + if( i < 0 ) { return -EAGAIN; } - + switch (vc->id ) { case V4L2_CID_AUDIO_MUTE: { vc->value = mxb->cur_mute; @@ -571,7 +571,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) return 0; } } - + DEB_EE(("VIDIOC_G_CTRL V4L2_CID_AUDIO_MUTE:%d.\n",vc->value)); return 0; } @@ -580,17 +580,17 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) { struct v4l2_control *vc = arg; int i = 0; - + for (i = MAXCONTROLS - 1; i >= 0; i--) { if (mxb_controls[i].id == vc->id) { break; } } - + if( i < 0 ) { return -EAGAIN; } - + switch (vc->id ) { case V4L2_CID_AUDIO_MUTE: { mxb->cur_mute = vc->value; @@ -614,12 +614,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) *input = mxb->cur_input; DEB_EE(("VIDIOC_G_INPUT %d.\n",*input)); - return 0; - } + return 0; + } case VIDIOC_S_INPUT: { int input = *(int *)arg; - struct tea6415c_multiplex vm; + struct tea6415c_multiplex vm; int i = 0; DEB_EE(("VIDIOC_S_INPUT %d.\n",input)); @@ -627,34 +627,34 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) if (input < 0 || input >= MXB_INPUTS) { return -EINVAL; } - + /* fixme: locke das setzen des inputs mit hilfe des mutexes - down(&dev->lock); + mutex_lock(&dev->lock); video_mux(dev,*i); - up(&dev->lock); + mutex_unlock(&dev->lock); */ - + /* fixme: check if streaming capture if ( 0 != dev->streaming ) { DEB_D(("VIDIOC_S_INPUT illegal while streaming.\n")); return -EPERM; } */ - + mxb->cur_input = input; - + saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync); - + /* prepare switching of tea6415c and saa7111a; have a look at the 'background'-file for further informations */ switch( input ) { - + case TUNER: { i = 0; vm.in = 3; vm.out = 17; - + if ( 0 != mxb->tea6415c->driver->command(mxb->tea6415c,TEA6415C_SWITCH, &vm)) { printk("VIDIOC_S_INPUT: could not address tea6415c #1\n"); return -EFAULT; @@ -662,7 +662,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) /* connect tuner-output always to multicable */ vm.in = 3; vm.out = 13; - break; + break; } case AUX3_YC: { @@ -703,11 +703,11 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) break; } } - + /* switch video in saa7111a */ if ( 0 != mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_INPUT, &i)) { printk("VIDIOC_S_INPUT: could not address saa7111a #1.\n"); - } + } /* switch the audio-source only if necessary */ if( 0 == mxb->cur_mute ) { @@ -738,11 +738,11 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) t->rangehigh = 13684; /* 855.25 MHz / 62.5 kHz = 13684 */ /* FIXME: add the real signal strength here */ t->signal = 0xffff; - t->afc = 0; + t->afc = 0; mxb->tda9840->driver->command(mxb->tda9840,TDA9840_DETECT, &byte); t->audmode = mxb->cur_mode; - + if( byte < 0 ) { t->rxsubchans = V4L2_TUNER_SUB_MONO; } else { @@ -777,12 +777,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct v4l2_tuner *t = arg; int result = 0; int byte = 0; - + if( 0 != t->index ) { DEB_D(("VIDIOC_S_TUNER: channel %d does not have a tuner attached.\n",t->index)); return -EINVAL; } - + switch(t->audmode) { case V4L2_TUNER_MODE_STEREO: { mxb->cur_mode = V4L2_TUNER_MODE_STEREO; @@ -790,6 +790,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_STEREO\n")); break; } + case V4L2_TUNER_MODE_LANG1_LANG2: { + mxb->cur_mode = V4L2_TUNER_MODE_LANG1_LANG2; + byte = TDA9840_SET_BOTH; + DEB_D(("VIDIOC_S_TUNER: V4L2_TUNER_MODE_LANG1_LANG2\n")); + break; + } case V4L2_TUNER_MODE_LANG1: { mxb->cur_mode = V4L2_TUNER_MODE_LANG1; byte = TDA9840_SET_LANG1; @@ -813,7 +819,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) if( 0 != (result = mxb->tda9840->driver->command(mxb->tda9840, TDA9840_SWITCH, &byte))) { printk("VIDIOC_S_TUNER error. result:%d, byte:%d\n",result,byte); } - + return 0; } case VIDIOC_G_FREQUENCY: @@ -839,7 +845,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) if (V4L2_TUNER_ANALOG_TV != f->type) return -EINVAL; - + if(0 != mxb->cur_input) { DEB_D(("VIDIOC_S_FREQ: channel %d does not have a tuner!\n",mxb->cur_input)); return -EINVAL; @@ -848,7 +854,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) mxb->cur_freq = *f; DEB_EE(("VIDIOC_S_FREQUENCY: freq:0x%08x.\n", mxb->cur_freq.frequency)); - /* tune in desired frequency */ + /* tune in desired frequency */ mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_FREQUENCY, &mxb->cur_freq); /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */ @@ -861,12 +867,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case MXB_S_AUDIO_CD: { int i = *(int*)arg; - + if( i < 0 || i >= MXB_AUDIOS ) { DEB_D(("illegal argument to MXB_S_AUDIO_CD: i:%d.\n",i)); return -EINVAL; } - + DEB_EE(("MXB_S_AUDIO_CD: i:%d.\n",i)); mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_cd[i][0]); @@ -877,12 +883,12 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) case MXB_S_AUDIO_LINE: { int i = *(int*)arg; - + if( i < 0 || i >= MXB_AUDIOS ) { DEB_D(("illegal argument to MXB_S_AUDIO_LINE: i:%d.\n",i)); return -EINVAL; } - + DEB_EE(("MXB_S_AUDIO_LINE: i:%d.\n",i)); mxb->tea6420_1->driver->command(mxb->tea6420_1,TEA6420_SWITCH, &TEA6420_line[i][0]); mxb->tea6420_2->driver->command(mxb->tea6420_2,TEA6420_SWITCH, &TEA6420_line[i][1]); @@ -894,13 +900,13 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct v4l2_audio *a = arg; if( a->index < 0 || a->index > MXB_INPUTS ) { - DEB_D(("VIDIOC_G_AUDIO %d out of range.\n",a->index)); + DEB_D(("VIDIOC_G_AUDIO %d out of range.\n",a->index)); return -EINVAL; } - - DEB_EE(("VIDIOC_G_AUDIO %d.\n",a->index)); + + DEB_EE(("VIDIOC_G_AUDIO %d.\n",a->index)); memcpy(a, &mxb_audios[video_audio_connect[mxb->cur_input]], sizeof(struct v4l2_audio)); - + return 0; } case VIDIOC_S_AUDIO: @@ -908,7 +914,7 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) struct v4l2_audio *a = arg; DEB_D(("VIDIOC_S_AUDIO %d.\n",a->index)); return 0; - } + } default: /* DEB2(printk("does not handle this ioctl.\n")); @@ -928,7 +934,7 @@ static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) v4l2_std_id std = V4L2_STD_PAL_I; DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n")); /* set the 7146 gpio register -- I don't know what this does exactly */ - saa7146_write(dev, GPIO_CTRL, 0x00404050); + saa7146_write(dev, GPIO_CTRL, 0x00404050); /* unset the 7111 gpio register -- I don't know what this does exactly */ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); @@ -936,7 +942,7 @@ static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) v4l2_std_id std = V4L2_STD_PAL_BG; DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n")); /* set the 7146 gpio register -- I don't know what this does exactly */ - saa7146_write(dev, GPIO_CTRL, 0x00404050); + saa7146_write(dev, GPIO_CTRL, 0x00404050); /* set the 7111 gpio register -- I don't know what this does exactly */ mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); @@ -969,8 +975,8 @@ static struct saa7146_standard standard[] = { }; static struct saa7146_pci_extension_data mxb = { - .ext_priv = "Multimedia eXtension Board", - .ext = &extension, + .ext_priv = "Multimedia eXtension Board", + .ext = &extension, }; static struct pci_device_id pci_tbl[] = { @@ -992,7 +998,7 @@ static struct saa7146_ext_vv vv_data = { .capabilities = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE, .stds = &standard[0], .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), - .std_callback = &std_callback, + .std_callback = &std_callback, .ioctls = &ioctls[0], .ioctl = mxb_ioctl, }; @@ -1000,7 +1006,7 @@ static struct saa7146_ext_vv vv_data = { static struct saa7146_extension extension = { .name = MXB_IDENTIFIER, .flags = SAA7146_USE_I2C_IRQ, - + .pci_tbl = &pci_tbl[0], .module = THIS_MODULE, @@ -1010,7 +1016,7 @@ static struct saa7146_extension extension = { .irq_mask = 0, .irq_func = NULL, -}; +}; static int __init mxb_init_module(void) { @@ -1018,7 +1024,7 @@ static int __init mxb_init_module(void) DEB_S(("failed to register extension.\n")); return -ENODEV; } - + return 0; } diff --git a/drivers/media/video/mxb.h b/drivers/media/video/mxb.h index 2332ed5f7c6b..400a57ba62ec 100644 --- a/drivers/media/video/mxb.h +++ b/drivers/media/video/mxb.h @@ -38,5 +38,5 @@ static struct v4l2_audio mxb_audios[MXB_AUDIOS] = { .name = "CD-ROM (X10)", .capability = V4L2_AUDCAP_STEREO, } -}; +}; #endif diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c new file mode 100644 index 000000000000..fdc8e3f13937 --- /dev/null +++ b/drivers/media/video/ov511.c @@ -0,0 +1,5932 @@ +/* + * OmniVision OV511 Camera-to-USB Bridge Driver + * + * Copyright (c) 1999-2003 Mark W. McClelland + * Original decompression code Copyright 1998-2000 OmniVision Technologies + * Many improvements by Bret Wallach <bwallac1@san.rr.com> + * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000) + * Snapshot code by Kevin Moore + * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> + * Changes by Claudio Matsuoka <claudio@conectiva.com> + * Original SAA7111A code by Dave Perks <dperks@ibm.net> + * URB error messages from pwc driver by Nemosoft + * generic_ioctl() code from videodev.c by Gerd Knorr and Alan Cox + * Memory management (rvmalloc) code from bttv driver, by Gerd Knorr and others + * + * Based on the Linux CPiA driver written by Peter Pregler, + * Scott J. Bertin and Johannes Erdfelt. + * + * Please see the file: Documentation/usb/ov511.txt + * and the website at: http://alpha.dyndns.org/ov511 + * for more info. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/ctype.h> +#include <linux/pagemap.h> +#include <asm/semaphore.h> +#include <asm/processor.h> +#include <linux/mm.h> +#include <linux/device.h> + +#if defined (__i386__) + #include <asm/cpufeature.h> +#endif + +#include "ov511.h" + +/* + * Version Information + */ +#define DRIVER_VERSION "v1.64 for Linux 2.5" +#define EMAIL "mark@alpha.dyndns.org" +#define DRIVER_AUTHOR "Mark McClelland <mark@alpha.dyndns.org> & Bret Wallach \ + & Orion Sky Lawlor <olawlor@acm.org> & Kevin Moore & Charl P. Botha \ + <cpbotha@ieee.org> & Claudio Matsuoka <claudio@conectiva.com>" +#define DRIVER_DESC "ov511 USB Camera Driver" + +#define OV511_I2C_RETRIES 3 +#define ENABLE_Y_QUANTABLE 1 +#define ENABLE_UV_QUANTABLE 1 + +#define OV511_MAX_UNIT_VIDEO 16 + +/* Pixel count * bytes per YUV420 pixel (1.5) */ +#define MAX_FRAME_SIZE(w, h) ((w) * (h) * 3 / 2) + +#define MAX_DATA_SIZE(w, h) (MAX_FRAME_SIZE(w, h) + sizeof(struct timeval)) + +/* Max size * bytes per YUV420 pixel (1.5) + one extra isoc frame for safety */ +#define MAX_RAW_DATA_SIZE(w, h) ((w) * (h) * 3 / 2 + 1024) + +#define FATAL_ERROR(rc) ((rc) < 0 && (rc) != -EPERM) + +/********************************************************************** + * Module Parameters + * (See ov511.txt for detailed descriptions of these) + **********************************************************************/ + +/* These variables (and all static globals) default to zero */ +static int autobright = 1; +static int autogain = 1; +static int autoexp = 1; +static int debug; +static int snapshot; +static int cams = 1; +static int compress; +static int testpat; +static int dumppix; +static int led = 1; +static int dump_bridge; +static int dump_sensor; +static int printph; +static int phy = 0x1f; +static int phuv = 0x05; +static int pvy = 0x06; +static int pvuv = 0x06; +static int qhy = 0x14; +static int qhuv = 0x03; +static int qvy = 0x04; +static int qvuv = 0x04; +static int lightfreq; +static int bandingfilter; +static int clockdiv = -1; +static int packetsize = -1; +static int framedrop = -1; +static int fastset; +static int force_palette; +static int backlight; +static int unit_video[OV511_MAX_UNIT_VIDEO]; +static int remove_zeros; +static int mirror; +static int ov518_color; + +module_param(autobright, int, 0); +MODULE_PARM_DESC(autobright, "Sensor automatically changes brightness"); +module_param(autogain, int, 0); +MODULE_PARM_DESC(autogain, "Sensor automatically changes gain"); +module_param(autoexp, int, 0); +MODULE_PARM_DESC(autoexp, "Sensor automatically changes exposure"); +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, + "Debug level: 0=none, 1=inits, 2=warning, 3=config, 4=functions, 5=max"); +module_param(snapshot, int, 0); +MODULE_PARM_DESC(snapshot, "Enable snapshot mode"); +module_param(cams, int, 0); +MODULE_PARM_DESC(cams, "Number of simultaneous cameras"); +module_param(compress, int, 0); +MODULE_PARM_DESC(compress, "Turn on compression"); +module_param(testpat, int, 0); +MODULE_PARM_DESC(testpat, + "Replace image with vertical bar testpattern (only partially working)"); +module_param(dumppix, int, 0); +MODULE_PARM_DESC(dumppix, "Dump raw pixel data"); +module_param(led, int, 0); +MODULE_PARM_DESC(led, + "LED policy (OV511+ or later). 0=off, 1=on (default), 2=auto (on when open)"); +module_param(dump_bridge, int, 0); +MODULE_PARM_DESC(dump_bridge, "Dump the bridge registers"); +module_param(dump_sensor, int, 0); +MODULE_PARM_DESC(dump_sensor, "Dump the sensor registers"); +module_param(printph, int, 0); +MODULE_PARM_DESC(printph, "Print frame start/end headers"); +module_param(phy, int, 0); +MODULE_PARM_DESC(phy, "Prediction range (horiz. Y)"); +module_param(phuv, int, 0); +MODULE_PARM_DESC(phuv, "Prediction range (horiz. UV)"); +module_param(pvy, int, 0); +MODULE_PARM_DESC(pvy, "Prediction range (vert. Y)"); +module_param(pvuv, int, 0); +MODULE_PARM_DESC(pvuv, "Prediction range (vert. UV)"); +module_param(qhy, int, 0); +MODULE_PARM_DESC(qhy, "Quantization threshold (horiz. Y)"); +module_param(qhuv, int, 0); +MODULE_PARM_DESC(qhuv, "Quantization threshold (horiz. UV)"); +module_param(qvy, int, 0); +MODULE_PARM_DESC(qvy, "Quantization threshold (vert. Y)"); +module_param(qvuv, int, 0); +MODULE_PARM_DESC(qvuv, "Quantization threshold (vert. UV)"); +module_param(lightfreq, int, 0); +MODULE_PARM_DESC(lightfreq, + "Light frequency. Set to 50 or 60 Hz, or zero for default settings"); +module_param(bandingfilter, int, 0); +MODULE_PARM_DESC(bandingfilter, + "Enable banding filter (to reduce effects of fluorescent lighting)"); +module_param(clockdiv, int, 0); +MODULE_PARM_DESC(clockdiv, "Force pixel clock divisor to a specific value"); +module_param(packetsize, int, 0); +MODULE_PARM_DESC(packetsize, "Force a specific isoc packet size"); +module_param(framedrop, int, 0); +MODULE_PARM_DESC(framedrop, "Force a specific frame drop register setting"); +module_param(fastset, int, 0); +MODULE_PARM_DESC(fastset, "Allows picture settings to take effect immediately"); +module_param(force_palette, int, 0); +MODULE_PARM_DESC(force_palette, "Force the palette to a specific value"); +module_param(backlight, int, 0); +MODULE_PARM_DESC(backlight, "For objects that are lit from behind"); +static int num_uv; +module_param_array(unit_video, int, &num_uv, 0); +MODULE_PARM_DESC(unit_video, + "Force use of specific minor number(s). 0 is not allowed."); +module_param(remove_zeros, int, 0); +MODULE_PARM_DESC(remove_zeros, + "Remove zero-padding from uncompressed incoming data"); +module_param(mirror, int, 0); +MODULE_PARM_DESC(mirror, "Reverse image horizontally"); +module_param(ov518_color, int, 0); +MODULE_PARM_DESC(ov518_color, "Enable OV518 color (experimental)"); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/********************************************************************** + * Miscellaneous Globals + **********************************************************************/ + +static struct usb_driver ov511_driver; + +/* Number of times to retry a failed I2C transaction. Increase this if you + * are getting "Failed to read sensor ID..." */ +static const int i2c_detect_tries = 5; + +static struct usb_device_id device_table [] = { + { USB_DEVICE(VEND_OMNIVISION, PROD_OV511) }, + { USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) }, + { USB_DEVICE(VEND_OMNIVISION, PROD_OV518) }, + { USB_DEVICE(VEND_OMNIVISION, PROD_OV518PLUS) }, + { USB_DEVICE(VEND_MATTEL, PROD_ME2CAM) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE (usb, device_table); + +static unsigned char yQuanTable511[] = OV511_YQUANTABLE; +static unsigned char uvQuanTable511[] = OV511_UVQUANTABLE; +static unsigned char yQuanTable518[] = OV518_YQUANTABLE; +static unsigned char uvQuanTable518[] = OV518_UVQUANTABLE; + +/********************************************************************** + * Symbolic Names + **********************************************************************/ + +/* Known OV511-based cameras */ +static struct symbolic_list camlist[] = { + { 0, "Generic Camera (no ID)" }, + { 1, "Mustek WCam 3X" }, + { 3, "D-Link DSB-C300" }, + { 4, "Generic OV511/OV7610" }, + { 5, "Puretek PT-6007" }, + { 6, "Lifeview USB Life TV (NTSC)" }, + { 21, "Creative Labs WebCam 3" }, + { 22, "Lifeview USB Life TV (PAL D/K+B/G)" }, + { 36, "Koala-Cam" }, + { 38, "Lifeview USB Life TV (PAL)" }, + { 41, "Samsung Anycam MPC-M10" }, + { 43, "Mtekvision Zeca MV402" }, + { 46, "Suma eON" }, + { 70, "Lifeview USB Life TV (PAL/SECAM)" }, + { 100, "Lifeview RoboCam" }, + { 102, "AverMedia InterCam Elite" }, + { 112, "MediaForte MV300" }, /* or OV7110 evaluation kit */ + { 134, "Ezonics EZCam II" }, + { 192, "Webeye 2000B" }, + { 253, "Alpha Vision Tech. AlphaCam SE" }, + { -1, NULL } +}; + +/* Video4Linux1 Palettes */ +static struct symbolic_list v4l1_plist[] = { + { VIDEO_PALETTE_GREY, "GREY" }, + { VIDEO_PALETTE_HI240, "HI240" }, + { VIDEO_PALETTE_RGB565, "RGB565" }, + { VIDEO_PALETTE_RGB24, "RGB24" }, + { VIDEO_PALETTE_RGB32, "RGB32" }, + { VIDEO_PALETTE_RGB555, "RGB555" }, + { VIDEO_PALETTE_YUV422, "YUV422" }, + { VIDEO_PALETTE_YUYV, "YUYV" }, + { VIDEO_PALETTE_UYVY, "UYVY" }, + { VIDEO_PALETTE_YUV420, "YUV420" }, + { VIDEO_PALETTE_YUV411, "YUV411" }, + { VIDEO_PALETTE_RAW, "RAW" }, + { VIDEO_PALETTE_YUV422P,"YUV422P" }, + { VIDEO_PALETTE_YUV411P,"YUV411P" }, + { VIDEO_PALETTE_YUV420P,"YUV420P" }, + { VIDEO_PALETTE_YUV410P,"YUV410P" }, + { -1, NULL } +}; + +static struct symbolic_list brglist[] = { + { BRG_OV511, "OV511" }, + { BRG_OV511PLUS, "OV511+" }, + { BRG_OV518, "OV518" }, + { BRG_OV518PLUS, "OV518+" }, + { -1, NULL } +}; + +static struct symbolic_list senlist[] = { + { SEN_OV76BE, "OV76BE" }, + { SEN_OV7610, "OV7610" }, + { SEN_OV7620, "OV7620" }, + { SEN_OV7620AE, "OV7620AE" }, + { SEN_OV6620, "OV6620" }, + { SEN_OV6630, "OV6630" }, + { SEN_OV6630AE, "OV6630AE" }, + { SEN_OV6630AF, "OV6630AF" }, + { SEN_OV8600, "OV8600" }, + { SEN_KS0127, "KS0127" }, + { SEN_KS0127B, "KS0127B" }, + { SEN_SAA7111A, "SAA7111A" }, + { -1, NULL } +}; + +/* URB error codes: */ +static struct symbolic_list urb_errlist[] = { + { -ENOSR, "Buffer error (overrun)" }, + { -EPIPE, "Stalled (device not responding)" }, + { -EOVERFLOW, "Babble (bad cable?)" }, + { -EPROTO, "Bit-stuff error (bad cable?)" }, + { -EILSEQ, "CRC/Timeout" }, + { -ETIMEDOUT, "NAK (device does not respond)" }, + { -1, NULL } +}; + +/********************************************************************** + * Memory management + **********************************************************************/ +static void * +rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void +rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + +/********************************************************************** + * + * Register I/O + * + **********************************************************************/ + +/* Write an OV51x register */ +static int +reg_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value) +{ + int rc; + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + mutex_lock(&ov->cbuf_lock); + ov->cbuf[0] = value; + rc = usb_control_msg(ov->dev, + usb_sndctrlpipe(ov->dev, 0), + (ov->bclass == BCL_OV518)?1:2 /* REG_IO */, + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, (__u16)reg, &ov->cbuf[0], 1, 1000); + mutex_unlock(&ov->cbuf_lock); + + if (rc < 0) + err("reg write: error %d: %s", rc, symbolic(urb_errlist, rc)); + + return rc; +} + +/* Read from an OV51x register */ +/* returns: negative is error, pos or zero is data */ +static int +reg_r(struct usb_ov511 *ov, unsigned char reg) +{ + int rc; + + mutex_lock(&ov->cbuf_lock); + rc = usb_control_msg(ov->dev, + usb_rcvctrlpipe(ov->dev, 0), + (ov->bclass == BCL_OV518)?1:3 /* REG_IO */, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, (__u16)reg, &ov->cbuf[0], 1, 1000); + + if (rc < 0) { + err("reg read: error %d: %s", rc, symbolic(urb_errlist, rc)); + } else { + rc = ov->cbuf[0]; + PDEBUG(5, "0x%02X:0x%02X", reg, ov->cbuf[0]); + } + + mutex_unlock(&ov->cbuf_lock); + + return rc; +} + +/* + * Writes bits at positions specified by mask to an OV51x reg. Bits that are in + * the same position as 1's in "mask" are cleared and set to "value". Bits + * that are in the same position as 0's in "mask" are preserved, regardless + * of their respective state in "value". + */ +static int +reg_w_mask(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int ret; + unsigned char oldval, newval; + + ret = reg_r(ov, reg); + if (ret < 0) + return ret; + + oldval = (unsigned char) ret; + oldval &= (~mask); /* Clear the masked bits */ + value &= mask; /* Enforce mask on value */ + newval = oldval | value; /* Set the desired bits */ + + return (reg_w(ov, reg, newval)); +} + +/* + * Writes multiple (n) byte value to a single register. Only valid with certain + * registers (0x30 and 0xc4 - 0xce). + */ +static int +ov518_reg_w32(struct usb_ov511 *ov, unsigned char reg, u32 val, int n) +{ + int rc; + + PDEBUG(5, "0x%02X:%7d, n=%d", reg, val, n); + + mutex_lock(&ov->cbuf_lock); + + *((__le32 *)ov->cbuf) = __cpu_to_le32(val); + + rc = usb_control_msg(ov->dev, + usb_sndctrlpipe(ov->dev, 0), + 1 /* REG_IO */, + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, (__u16)reg, ov->cbuf, n, 1000); + mutex_unlock(&ov->cbuf_lock); + + if (rc < 0) + err("reg write multiple: error %d: %s", rc, + symbolic(urb_errlist, rc)); + + return rc; +} + +static int +ov511_upload_quan_tables(struct usb_ov511 *ov) +{ + unsigned char *pYTable = yQuanTable511; + unsigned char *pUVTable = uvQuanTable511; + unsigned char val0, val1; + int i, rc, reg = R511_COMP_LUT_BEGIN; + + PDEBUG(4, "Uploading quantization tables"); + + for (i = 0; i < OV511_QUANTABLESIZE / 2; i++) { + if (ENABLE_Y_QUANTABLE) { + val0 = *pYTable++; + val1 = *pYTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg, val0); + if (rc < 0) + return rc; + } + + if (ENABLE_UV_QUANTABLE) { + val0 = *pUVTable++; + val1 = *pUVTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg + OV511_QUANTABLESIZE/2, val0); + if (rc < 0) + return rc; + } + + reg++; + } + + return 0; +} + +/* OV518 quantization tables are 8x4 (instead of 8x8) */ +static int +ov518_upload_quan_tables(struct usb_ov511 *ov) +{ + unsigned char *pYTable = yQuanTable518; + unsigned char *pUVTable = uvQuanTable518; + unsigned char val0, val1; + int i, rc, reg = R511_COMP_LUT_BEGIN; + + PDEBUG(4, "Uploading quantization tables"); + + for (i = 0; i < OV518_QUANTABLESIZE / 2; i++) { + if (ENABLE_Y_QUANTABLE) { + val0 = *pYTable++; + val1 = *pYTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg, val0); + if (rc < 0) + return rc; + } + + if (ENABLE_UV_QUANTABLE) { + val0 = *pUVTable++; + val1 = *pUVTable++; + val0 &= 0x0f; + val1 &= 0x0f; + val0 |= val1 << 4; + rc = reg_w(ov, reg + OV518_QUANTABLESIZE/2, val0); + if (rc < 0) + return rc; + } + + reg++; + } + + return 0; +} + +static int +ov51x_reset(struct usb_ov511 *ov, unsigned char reset_type) +{ + int rc; + + /* Setting bit 0 not allowed on 518/518Plus */ + if (ov->bclass == BCL_OV518) + reset_type &= 0xfe; + + PDEBUG(4, "Reset: type=0x%02X", reset_type); + + rc = reg_w(ov, R51x_SYS_RESET, reset_type); + rc = reg_w(ov, R51x_SYS_RESET, 0); + + if (rc < 0) + err("reset: command failed"); + + return rc; +} + +/********************************************************************** + * + * Low-level I2C I/O functions + * + **********************************************************************/ + +/* NOTE: Do not call this function directly! + * The OV518 I2C I/O procedure is different, hence, this function. + * This is normally only called from i2c_w(). Note that this function + * always succeeds regardless of whether the sensor is present and working. + */ +static int +ov518_i2c_write_internal(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value) +{ + int rc; + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_3, reg); + if (rc < 0) + return rc; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(ov, R51x_I2C_DATA, value); + if (rc < 0) + return rc; + + /* Initiate 3-byte write cycle */ + rc = reg_w(ov, R518_I2C_CTL, 0x01); + if (rc < 0) + return rc; + + return 0; +} + +/* NOTE: Do not call this function directly! */ +static int +ov511_i2c_write_internal(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value) +{ + int rc, retries; + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + /* Three byte write cycle */ + for (retries = OV511_I2C_RETRIES; ; ) { + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_3, reg); + if (rc < 0) + break; + + /* Write "value" to I2C data port of OV511 */ + rc = reg_w(ov, R51x_I2C_DATA, value); + if (rc < 0) + break; + + /* Initiate 3-byte write cycle */ + rc = reg_w(ov, R511_I2C_CTL, 0x01); + if (rc < 0) + break; + + /* Retry until idle */ + do + rc = reg_r(ov, R511_I2C_CTL); + while (rc > 0 && ((rc&1) == 0)); + if (rc < 0) + break; + + /* Ack? */ + if ((rc&2) == 0) { + rc = 0; + break; + } +#if 0 + /* I2C abort */ + reg_w(ov, R511_I2C_CTL, 0x10); +#endif + if (--retries < 0) { + err("i2c write retries exhausted"); + rc = -1; + break; + } + } + + return rc; +} + +/* NOTE: Do not call this function directly! + * The OV518 I2C I/O procedure is different, hence, this function. + * This is normally only called from i2c_r(). Note that this function + * always succeeds regardless of whether the sensor is present and working. + */ +static int +ov518_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) +{ + int rc, value; + + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(ov, R518_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + /* Initiate 2-byte read cycle */ + rc = reg_w(ov, R518_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + value = reg_r(ov, R51x_I2C_DATA); + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + return value; +} + +/* NOTE: Do not call this function directly! + * returns: negative is error, pos or zero is data */ +static int +ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) +{ + int rc, value, retries; + + /* Two byte write cycle */ + for (retries = OV511_I2C_RETRIES; ; ) { + /* Select camera register */ + rc = reg_w(ov, R51x_I2C_SADDR_2, reg); + if (rc < 0) + return rc; + + /* Initiate 2-byte write cycle */ + rc = reg_w(ov, R511_I2C_CTL, 0x03); + if (rc < 0) + return rc; + + /* Retry until idle */ + do + rc = reg_r(ov, R511_I2C_CTL); + while (rc > 0 && ((rc&1) == 0)); + if (rc < 0) + return rc; + + if ((rc&2) == 0) /* Ack? */ + break; + + /* I2C abort */ + reg_w(ov, R511_I2C_CTL, 0x10); + + if (--retries < 0) { + err("i2c write retries exhausted"); + return -1; + } + } + + /* Two byte read cycle */ + for (retries = OV511_I2C_RETRIES; ; ) { + /* Initiate 2-byte read cycle */ + rc = reg_w(ov, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + /* Retry until idle */ + do + rc = reg_r(ov, R511_I2C_CTL); + while (rc > 0 && ((rc&1) == 0)); + if (rc < 0) + return rc; + + if ((rc&2) == 0) /* Ack? */ + break; + + /* I2C abort */ + rc = reg_w(ov, R511_I2C_CTL, 0x10); + if (rc < 0) + return rc; + + if (--retries < 0) { + err("i2c read retries exhausted"); + return -1; + } + } + + value = reg_r(ov, R51x_I2C_DATA); + + PDEBUG(5, "0x%02X:0x%02X", reg, value); + + /* This is needed to make i2c_w() work */ + rc = reg_w(ov, R511_I2C_CTL, 0x05); + if (rc < 0) + return rc; + + return value; +} + +/* returns: negative is error, pos or zero is data */ +static int +i2c_r(struct usb_ov511 *ov, unsigned char reg) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_read_internal(ov, reg); + else + rc = ov511_i2c_read_internal(ov, reg); + + mutex_unlock(&ov->i2c_lock); + + return rc; +} + +static int +i2c_w(struct usb_ov511 *ov, unsigned char reg, unsigned char value) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_write_internal(ov, reg, value); + else + rc = ov511_i2c_write_internal(ov, reg, value); + + mutex_unlock(&ov->i2c_lock); + + return rc; +} + +/* Do not call this function directly! */ +static int +ov51x_i2c_write_mask_internal(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int rc; + unsigned char oldval, newval; + + if (mask == 0xff) { + newval = value; + } else { + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_read_internal(ov, reg); + else + rc = ov511_i2c_read_internal(ov, reg); + if (rc < 0) + return rc; + + oldval = (unsigned char) rc; + oldval &= (~mask); /* Clear the masked bits */ + value &= mask; /* Enforce mask on value */ + newval = oldval | value; /* Set the desired bits */ + } + + if (ov->bclass == BCL_OV518) + return (ov518_i2c_write_internal(ov, reg, newval)); + else + return (ov511_i2c_write_internal(ov, reg, newval)); +} + +/* Writes bits at positions specified by mask to an I2C reg. Bits that are in + * the same position as 1's in "mask" are cleared and set to "value". Bits + * that are in the same position as 0's in "mask" are preserved, regardless + * of their respective state in "value". + */ +static int +i2c_w_mask(struct usb_ov511 *ov, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask); + mutex_unlock(&ov->i2c_lock); + + return rc; +} + +/* Set the read and write slave IDs. The "slave" argument is the write slave, + * and the read slave will be set to (slave + 1). ov->i2c_lock should be held + * when calling this. This should not be called from outside the i2c I/O + * functions. + */ +static int +i2c_set_slave_internal(struct usb_ov511 *ov, unsigned char slave) +{ + int rc; + + rc = reg_w(ov, R51x_I2C_W_SID, slave); + if (rc < 0) + return rc; + + rc = reg_w(ov, R51x_I2C_R_SID, slave + 1); + if (rc < 0) + return rc; + + return 0; +} + +/* Write to a specific I2C slave ID and register, using the specified mask */ +static int +i2c_w_slave(struct usb_ov511 *ov, + unsigned char slave, + unsigned char reg, + unsigned char value, + unsigned char mask) +{ + int rc = 0; + + mutex_lock(&ov->i2c_lock); + + /* Set new slave IDs */ + rc = i2c_set_slave_internal(ov, slave); + if (rc < 0) + goto out; + + rc = ov51x_i2c_write_mask_internal(ov, reg, value, mask); + +out: + /* Restore primary IDs */ + if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0) + err("Couldn't restore primary I2C slave"); + + mutex_unlock(&ov->i2c_lock); + return rc; +} + +/* Read from a specific I2C slave ID and register */ +static int +i2c_r_slave(struct usb_ov511 *ov, + unsigned char slave, + unsigned char reg) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + /* Set new slave IDs */ + rc = i2c_set_slave_internal(ov, slave); + if (rc < 0) + goto out; + + if (ov->bclass == BCL_OV518) + rc = ov518_i2c_read_internal(ov, reg); + else + rc = ov511_i2c_read_internal(ov, reg); + +out: + /* Restore primary IDs */ + if (i2c_set_slave_internal(ov, ov->primary_i2c_slave) < 0) + err("Couldn't restore primary I2C slave"); + + mutex_unlock(&ov->i2c_lock); + return rc; +} + +/* Sets I2C read and write slave IDs. Returns <0 for error */ +static int +ov51x_set_slave_ids(struct usb_ov511 *ov, unsigned char sid) +{ + int rc; + + mutex_lock(&ov->i2c_lock); + + rc = i2c_set_slave_internal(ov, sid); + if (rc < 0) + goto out; + + // FIXME: Is this actually necessary? + rc = ov51x_reset(ov, OV511_RESET_NOREGS); +out: + mutex_unlock(&ov->i2c_lock); + return rc; +} + +static int +write_regvals(struct usb_ov511 *ov, struct ov511_regvals * pRegvals) +{ + int rc; + + while (pRegvals->bus != OV511_DONE_BUS) { + if (pRegvals->bus == OV511_REG_BUS) { + if ((rc = reg_w(ov, pRegvals->reg, pRegvals->val)) < 0) + return rc; + } else if (pRegvals->bus == OV511_I2C_BUS) { + if ((rc = i2c_w(ov, pRegvals->reg, pRegvals->val)) < 0) + return rc; + } else { + err("Bad regval array"); + return -1; + } + pRegvals++; + } + return 0; +} + +#ifdef OV511_DEBUG +static void +dump_i2c_range(struct usb_ov511 *ov, int reg1, int regn) +{ + int i, rc; + + for (i = reg1; i <= regn; i++) { + rc = i2c_r(ov, i); + info("Sensor[0x%02X] = 0x%02X", i, rc); + } +} + +static void +dump_i2c_regs(struct usb_ov511 *ov) +{ + info("I2C REGS"); + dump_i2c_range(ov, 0x00, 0x7C); +} + +static void +dump_reg_range(struct usb_ov511 *ov, int reg1, int regn) +{ + int i, rc; + + for (i = reg1; i <= regn; i++) { + rc = reg_r(ov, i); + info("OV511[0x%02X] = 0x%02X", i, rc); + } +} + +static void +ov511_dump_regs(struct usb_ov511 *ov) +{ + info("CAMERA INTERFACE REGS"); + dump_reg_range(ov, 0x10, 0x1f); + info("DRAM INTERFACE REGS"); + dump_reg_range(ov, 0x20, 0x23); + info("ISO FIFO REGS"); + dump_reg_range(ov, 0x30, 0x31); + info("PIO REGS"); + dump_reg_range(ov, 0x38, 0x39); + dump_reg_range(ov, 0x3e, 0x3e); + info("I2C REGS"); + dump_reg_range(ov, 0x40, 0x49); + info("SYSTEM CONTROL REGS"); + dump_reg_range(ov, 0x50, 0x55); + dump_reg_range(ov, 0x5e, 0x5f); + info("OmniCE REGS"); + dump_reg_range(ov, 0x70, 0x79); + /* NOTE: Quantization tables are not readable. You will get the value + * in reg. 0x79 for every table register */ + dump_reg_range(ov, 0x80, 0x9f); + dump_reg_range(ov, 0xa0, 0xbf); + +} + +static void +ov518_dump_regs(struct usb_ov511 *ov) +{ + info("VIDEO MODE REGS"); + dump_reg_range(ov, 0x20, 0x2f); + info("DATA PUMP AND SNAPSHOT REGS"); + dump_reg_range(ov, 0x30, 0x3f); + info("I2C REGS"); + dump_reg_range(ov, 0x40, 0x4f); + info("SYSTEM CONTROL AND VENDOR REGS"); + dump_reg_range(ov, 0x50, 0x5f); + info("60 - 6F"); + dump_reg_range(ov, 0x60, 0x6f); + info("70 - 7F"); + dump_reg_range(ov, 0x70, 0x7f); + info("Y QUANTIZATION TABLE"); + dump_reg_range(ov, 0x80, 0x8f); + info("UV QUANTIZATION TABLE"); + dump_reg_range(ov, 0x90, 0x9f); + info("A0 - BF"); + dump_reg_range(ov, 0xa0, 0xbf); + info("CBR"); + dump_reg_range(ov, 0xc0, 0xcf); +} +#endif + +/*****************************************************************************/ + +/* Temporarily stops OV511 from functioning. Must do this before changing + * registers while the camera is streaming */ +static inline int +ov51x_stop(struct usb_ov511 *ov) +{ + PDEBUG(4, "stopping"); + ov->stopped = 1; + if (ov->bclass == BCL_OV518) + return (reg_w_mask(ov, R51x_SYS_RESET, 0x3a, 0x3a)); + else + return (reg_w(ov, R51x_SYS_RESET, 0x3d)); +} + +/* Restarts OV511 after ov511_stop() is called. Has no effect if it is not + * actually stopped (for performance). */ +static inline int +ov51x_restart(struct usb_ov511 *ov) +{ + if (ov->stopped) { + PDEBUG(4, "restarting"); + ov->stopped = 0; + + /* Reinitialize the stream */ + if (ov->bclass == BCL_OV518) + reg_w(ov, 0x2f, 0x80); + + return (reg_w(ov, R51x_SYS_RESET, 0x00)); + } + + return 0; +} + +/* Sleeps until no frames are active. Returns !0 if got signal */ +static int +ov51x_wait_frames_inactive(struct usb_ov511 *ov) +{ + return wait_event_interruptible(ov->wq, ov->curframe < 0); +} + +/* Resets the hardware snapshot button */ +static void +ov51x_clear_snapshot(struct usb_ov511 *ov) +{ + if (ov->bclass == BCL_OV511) { + reg_w(ov, R51x_SYS_SNAP, 0x00); + reg_w(ov, R51x_SYS_SNAP, 0x02); + reg_w(ov, R51x_SYS_SNAP, 0x00); + } else if (ov->bclass == BCL_OV518) { + warn("snapshot reset not supported yet on OV518(+)"); + } else { + err("clear snap: invalid bridge type"); + } +} + +#if 0 +/* Checks the status of the snapshot button. Returns 1 if it was pressed since + * it was last cleared, and zero in all other cases (including errors) */ +static int +ov51x_check_snapshot(struct usb_ov511 *ov) +{ + int ret, status = 0; + + if (ov->bclass == BCL_OV511) { + ret = reg_r(ov, R51x_SYS_SNAP); + if (ret < 0) { + err("Error checking snspshot status (%d)", ret); + } else if (ret & 0x08) { + status = 1; + } + } else if (ov->bclass == BCL_OV518) { + warn("snapshot check not supported yet on OV518(+)"); + } else { + err("check snap: invalid bridge type"); + } + + return status; +} +#endif + +/* This does an initial reset of an OmniVision sensor and ensures that I2C + * is synchronized. Returns <0 for failure. + */ +static int +init_ov_sensor(struct usb_ov511 *ov) +{ + int i, success; + + /* Reset the sensor */ + if (i2c_w(ov, 0x12, 0x80) < 0) + return -EIO; + + /* Wait for it to initialize */ + msleep(150); + + for (i = 0, success = 0; i < i2c_detect_tries && !success; i++) { + if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) && + (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) { + success = 1; + continue; + } + + /* Reset the sensor */ + if (i2c_w(ov, 0x12, 0x80) < 0) + return -EIO; + /* Wait for it to initialize */ + msleep(150); + /* Dummy read to sync I2C */ + if (i2c_r(ov, 0x00) < 0) + return -EIO; + } + + if (!success) + return -EIO; + + PDEBUG(1, "I2C synced in %d attempt(s)", i); + + return 0; +} + +static int +ov511_set_packet_size(struct usb_ov511 *ov, int size) +{ + int alt, mult; + + if (ov51x_stop(ov) < 0) + return -EIO; + + mult = size >> 5; + + if (ov->bridge == BRG_OV511) { + if (size == 0) + alt = OV511_ALT_SIZE_0; + else if (size == 257) + alt = OV511_ALT_SIZE_257; + else if (size == 513) + alt = OV511_ALT_SIZE_513; + else if (size == 769) + alt = OV511_ALT_SIZE_769; + else if (size == 993) + alt = OV511_ALT_SIZE_993; + else { + err("Set packet size: invalid size (%d)", size); + return -EINVAL; + } + } else if (ov->bridge == BRG_OV511PLUS) { + if (size == 0) + alt = OV511PLUS_ALT_SIZE_0; + else if (size == 33) + alt = OV511PLUS_ALT_SIZE_33; + else if (size == 129) + alt = OV511PLUS_ALT_SIZE_129; + else if (size == 257) + alt = OV511PLUS_ALT_SIZE_257; + else if (size == 385) + alt = OV511PLUS_ALT_SIZE_385; + else if (size == 513) + alt = OV511PLUS_ALT_SIZE_513; + else if (size == 769) + alt = OV511PLUS_ALT_SIZE_769; + else if (size == 961) + alt = OV511PLUS_ALT_SIZE_961; + else { + err("Set packet size: invalid size (%d)", size); + return -EINVAL; + } + } else { + err("Set packet size: Invalid bridge type"); + return -EINVAL; + } + + PDEBUG(3, "%d, mult=%d, alt=%d", size, mult, alt); + + if (reg_w(ov, R51x_FIFO_PSIZE, mult) < 0) + return -EIO; + + if (usb_set_interface(ov->dev, ov->iface, alt) < 0) { + err("Set packet size: set interface error"); + return -EBUSY; + } + + if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) + return -EIO; + + ov->packet_size = size; + + if (ov51x_restart(ov) < 0) + return -EIO; + + return 0; +} + +/* Note: Unlike the OV511/OV511+, the size argument does NOT include the + * optional packet number byte. The actual size *is* stored in ov->packet_size, + * though. */ +static int +ov518_set_packet_size(struct usb_ov511 *ov, int size) +{ + int alt; + + if (ov51x_stop(ov) < 0) + return -EIO; + + if (ov->bclass == BCL_OV518) { + if (size == 0) + alt = OV518_ALT_SIZE_0; + else if (size == 128) + alt = OV518_ALT_SIZE_128; + else if (size == 256) + alt = OV518_ALT_SIZE_256; + else if (size == 384) + alt = OV518_ALT_SIZE_384; + else if (size == 512) + alt = OV518_ALT_SIZE_512; + else if (size == 640) + alt = OV518_ALT_SIZE_640; + else if (size == 768) + alt = OV518_ALT_SIZE_768; + else if (size == 896) + alt = OV518_ALT_SIZE_896; + else { + err("Set packet size: invalid size (%d)", size); + return -EINVAL; + } + } else { + err("Set packet size: Invalid bridge type"); + return -EINVAL; + } + + PDEBUG(3, "%d, alt=%d", size, alt); + + ov->packet_size = size; + if (size > 0) { + /* Program ISO FIFO size reg (packet number isn't included) */ + ov518_reg_w32(ov, 0x30, size, 2); + + if (ov->packet_numbering) + ++ov->packet_size; + } + + if (usb_set_interface(ov->dev, ov->iface, alt) < 0) { + err("Set packet size: set interface error"); + return -EBUSY; + } + + /* Initialize the stream */ + if (reg_w(ov, 0x2f, 0x80) < 0) + return -EIO; + + if (ov51x_restart(ov) < 0) + return -EIO; + + if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) + return -EIO; + + return 0; +} + +/* Upload compression params and quantization tables. Returns 0 for success. */ +static int +ov511_init_compression(struct usb_ov511 *ov) +{ + int rc = 0; + + if (!ov->compress_inited) { + reg_w(ov, 0x70, phy); + reg_w(ov, 0x71, phuv); + reg_w(ov, 0x72, pvy); + reg_w(ov, 0x73, pvuv); + reg_w(ov, 0x74, qhy); + reg_w(ov, 0x75, qhuv); + reg_w(ov, 0x76, qvy); + reg_w(ov, 0x77, qvuv); + + if (ov511_upload_quan_tables(ov) < 0) { + err("Error uploading quantization tables"); + rc = -EIO; + goto out; + } + } + + ov->compress_inited = 1; +out: + return rc; +} + +/* Upload compression params and quantization tables. Returns 0 for success. */ +static int +ov518_init_compression(struct usb_ov511 *ov) +{ + int rc = 0; + + if (!ov->compress_inited) { + if (ov518_upload_quan_tables(ov) < 0) { + err("Error uploading quantization tables"); + rc = -EIO; + goto out; + } + } + + ov->compress_inited = 1; +out: + return rc; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's contrast setting to "val" */ +static int +sensor_set_contrast(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + { + rc = i2c_w(ov, OV7610_REG_CNT, val >> 8); + if (rc < 0) + goto out; + break; + } + case SEN_OV6630: + { + rc = i2c_w_mask(ov, OV7610_REG_CNT, val >> 12, 0x0f); + if (rc < 0) + goto out; + break; + } + case SEN_OV7620: + { + unsigned char ctab[] = { + 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57, + 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff + }; + + /* Use Y gamma control instead. Bit 0 enables it. */ + rc = i2c_w(ov, 0x64, ctab[val>>12]); + if (rc < 0) + goto out; + break; + } + case SEN_SAA7111A: + { + rc = i2c_w(ov, 0x0b, val >> 9); + if (rc < 0) + goto out; + break; + } + default: + { + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + } + + rc = 0; /* Success */ + ov->contrast = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's contrast setting */ +static int +sensor_get_contrast(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + rc = i2c_r(ov, OV7610_REG_CNT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_CNT); + if (rc < 0) + return rc; + else + *val = rc << 12; + break; + case SEN_OV7620: + /* Use Y gamma reg instead. Bit 0 is the enable bit. */ + rc = i2c_r(ov, 0x64); + if (rc < 0) + return rc; + else + *val = (rc & 0xfe) << 8; + break; + case SEN_SAA7111A: + *val = ov->contrast; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->contrast = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's brightness setting to "val" */ +static int +sensor_set_brightness(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(4, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_w(ov, OV7610_REG_BRT, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_OV7620: + /* 7620 doesn't like manual changes when in auto mode */ + if (!ov->auto_brt) { + rc = i2c_w(ov, OV7610_REG_BRT, val >> 8); + if (rc < 0) + goto out; + } + break; + case SEN_SAA7111A: + rc = i2c_w(ov, 0x0a, val >> 8); + if (rc < 0) + goto out; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + + rc = 0; /* Success */ + ov->brightness = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's brightness setting */ +static int +sensor_get_brightness(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV7620: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_BRT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_SAA7111A: + *val = ov->brightness; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->brightness = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's saturation (color intensity) setting to "val" */ +static int +sensor_set_saturation(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_w(ov, OV7610_REG_SAT, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_OV7620: +// /* Use UV gamma control instead. Bits 0 & 7 are reserved. */ +// rc = ov_i2c_write(ov->dev, 0x62, (val >> 9) & 0x7e); +// if (rc < 0) +// goto out; + rc = i2c_w(ov, OV7610_REG_SAT, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_SAA7111A: + rc = i2c_w(ov, 0x0c, val >> 9); + if (rc < 0) + goto out; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + + rc = 0; /* Success */ + ov->colour = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's saturation (color intensity) setting */ +static int +sensor_get_saturation(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_SAT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_OV7620: +// /* Use UV gamma reg instead. Bits 0 & 7 are reserved. */ +// rc = i2c_r(ov, 0x62); +// if (rc < 0) +// return rc; +// else +// *val = (rc & 0x7e) << 9; + rc = i2c_r(ov, OV7610_REG_SAT); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_SAA7111A: + *val = ov->colour; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->colour = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +/* Sets sensor's hue (red/blue balance) setting to "val" */ +static int +sensor_set_hue(struct usb_ov511 *ov, unsigned short val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_w(ov, OV7610_REG_RED, 0xFF - (val >> 8)); + if (rc < 0) + goto out; + + rc = i2c_w(ov, OV7610_REG_BLUE, val >> 8); + if (rc < 0) + goto out; + break; + case SEN_OV7620: +// Hue control is causing problems. I will enable it once it's fixed. +#if 0 + rc = i2c_w(ov, 0x7a, (unsigned char)(val >> 8) + 0xb); + if (rc < 0) + goto out; + + rc = i2c_w(ov, 0x79, (unsigned char)(val >> 8) + 0xb); + if (rc < 0) + goto out; +#endif + break; + case SEN_SAA7111A: + rc = i2c_w(ov, 0x0d, (val + 32768) >> 8); + if (rc < 0) + goto out; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + rc = -EPERM; + goto out; + } + + rc = 0; /* Success */ + ov->hue = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} + +/* Gets sensor's hue (red/blue balance) setting */ +static int +sensor_get_hue(struct usb_ov511 *ov, unsigned short *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + case SEN_OV6630: + rc = i2c_r(ov, OV7610_REG_BLUE); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_OV7620: + rc = i2c_r(ov, 0x7a); + if (rc < 0) + return rc; + else + *val = rc << 8; + break; + case SEN_SAA7111A: + *val = ov->hue; + break; + default: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + } + + PDEBUG(3, "%d", *val); + ov->hue = *val; + + return 0; +} + +/* -------------------------------------------------------------------------- */ + +static int +sensor_set_picture(struct usb_ov511 *ov, struct video_picture *p) +{ + int rc; + + PDEBUG(4, "sensor_set_picture"); + + ov->whiteness = p->whiteness; + + /* Don't return error if a setting is unsupported, or rest of settings + * will not be performed */ + + rc = sensor_set_contrast(ov, p->contrast); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_brightness(ov, p->brightness); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_saturation(ov, p->colour); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_hue(ov, p->hue); + if (FATAL_ERROR(rc)) + return rc; + + return 0; +} + +static int +sensor_get_picture(struct usb_ov511 *ov, struct video_picture *p) +{ + int rc; + + PDEBUG(4, "sensor_get_picture"); + + /* Don't return error if a setting is unsupported, or rest of settings + * will not be performed */ + + rc = sensor_get_contrast(ov, &(p->contrast)); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_get_brightness(ov, &(p->brightness)); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_get_saturation(ov, &(p->colour)); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_get_hue(ov, &(p->hue)); + if (FATAL_ERROR(rc)) + return rc; + + p->whiteness = 105 << 8; + + return 0; +} + +#if 0 +// FIXME: Exposure range is only 0x00-0x7f in interlace mode +/* Sets current exposure for sensor. This only has an effect if auto-exposure + * is off */ +static inline int +sensor_set_exposure(struct usb_ov511 *ov, unsigned char val) +{ + int rc; + + PDEBUG(3, "%d", val); + + if (ov->stop_during_set) + if (ov51x_stop(ov) < 0) + return -EIO; + + switch (ov->sensor) { + case SEN_OV6620: + case SEN_OV6630: + case SEN_OV7610: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + rc = i2c_w(ov, 0x10, val); + if (rc < 0) + goto out; + + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_exposure"); + return -EINVAL; + } + + rc = 0; /* Success */ + ov->exposure = val; +out: + if (ov51x_restart(ov) < 0) + return -EIO; + + return rc; +} +#endif + +/* Gets current exposure level from sensor, regardless of whether it is under + * manual control. */ +static int +sensor_get_exposure(struct usb_ov511 *ov, unsigned char *val) +{ + int rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV6620: + case SEN_OV6630: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + rc = i2c_r(ov, 0x10); + if (rc < 0) + return rc; + else + *val = rc; + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + val = NULL; + PDEBUG(3, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for get_exposure"); + return -EINVAL; + } + + PDEBUG(3, "%d", *val); + ov->exposure = *val; + + return 0; +} + +/* Turns on or off the LED. Only has an effect with OV511+/OV518(+) */ +static void +ov51x_led_control(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + if (ov->bridge == BRG_OV511PLUS) + reg_w(ov, R511_SYS_LED_CTL, enable ? 1 : 0); + else if (ov->bclass == BCL_OV518) + reg_w_mask(ov, R518_GPIO_OUT, enable ? 0x02 : 0x00, 0x02); + + return; +} + +/* Matches the sensor's internal frame rate to the lighting frequency. + * Valid frequencies are: + * 50 - 50Hz, for European and Asian lighting + * 60 - 60Hz, for American lighting + * + * Tested with: OV7610, OV7620, OV76BE, OV6620 + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_light_freq(struct usb_ov511 *ov, int freq) +{ + int sixty; + + PDEBUG(4, "%d Hz", freq); + + if (freq == 60) + sixty = 1; + else if (freq == 50) + sixty = 0; + else { + err("Invalid light freq (%d Hz)", freq); + return -EINVAL; + } + + switch (ov->sensor) { + case SEN_OV7610: + i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80); + i2c_w(ov, 0x2b, sixty?0x00:0xac); + i2c_w_mask(ov, 0x13, 0x10, 0x10); + i2c_w_mask(ov, 0x13, 0x00, 0x10); + break; + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + i2c_w_mask(ov, 0x2a, sixty?0x00:0x80, 0x80); + i2c_w(ov, 0x2b, sixty?0x00:0xac); + i2c_w_mask(ov, 0x76, 0x01, 0x01); + break; + case SEN_OV6620: + case SEN_OV6630: + i2c_w(ov, 0x2b, sixty?0xa8:0x28); + i2c_w(ov, 0x2a, sixty?0x84:0xa4); + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_light_freq"); + return -EINVAL; + } + + ov->lightfreq = freq; + + return 0; +} + +/* If enable is true, turn on the sensor's banding filter, otherwise turn it + * off. This filter tries to reduce the pattern of horizontal light/dark bands + * caused by some (usually fluorescent) lighting. The light frequency must be + * set either before or after enabling it with ov51x_set_light_freq(). + * + * Tested with: OV7610, OV7620, OV76BE, OV6620. + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_banding_filter(struct usb_ov511 *ov, int enable) +{ + int rc; + + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B + || ov->sensor == SEN_SAA7111A) { + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + } + + rc = i2c_w_mask(ov, 0x2d, enable?0x04:0x00, 0x04); + if (rc < 0) + return rc; + + ov->bandfilt = enable; + + return 0; +} + +/* If enable is true, turn on the sensor's auto brightness control, otherwise + * turn it off. + * + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_auto_brightness(struct usb_ov511 *ov, int enable) +{ + int rc; + + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + if (ov->sensor == SEN_KS0127 || ov->sensor == SEN_KS0127B + || ov->sensor == SEN_SAA7111A) { + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + } + + rc = i2c_w_mask(ov, 0x2d, enable?0x10:0x00, 0x10); + if (rc < 0) + return rc; + + ov->auto_brt = enable; + + return 0; +} + +/* If enable is true, turn on the sensor's auto exposure control, otherwise + * turn it off. + * + * Unsupported: KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_auto_exposure(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + switch (ov->sensor) { + case SEN_OV7610: + i2c_w_mask(ov, 0x29, enable?0x00:0x80, 0x80); + break; + case SEN_OV6620: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + i2c_w_mask(ov, 0x13, enable?0x01:0x00, 0x01); + break; + case SEN_OV6630: + i2c_w_mask(ov, 0x28, enable?0x00:0x10, 0x10); + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_auto_exposure"); + return -EINVAL; + } + + ov->auto_exp = enable; + + return 0; +} + +/* Modifies the sensor's exposure algorithm to allow proper exposure of objects + * that are illuminated from behind. + * + * Tested with: OV6620, OV7620 + * Unsupported: OV7610, OV76BE, KS0127, KS0127B, SAA7111A + * Returns: 0 for success + */ +static int +sensor_set_backlight(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + switch (ov->sensor) { + case SEN_OV7620: + case SEN_OV8600: + i2c_w_mask(ov, 0x68, enable?0xe0:0xc0, 0xe0); + i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); + i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02); + break; + case SEN_OV6620: + i2c_w_mask(ov, 0x4e, enable?0xe0:0xc0, 0xe0); + i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); + i2c_w_mask(ov, 0x0e, enable?0x80:0x00, 0x80); + break; + case SEN_OV6630: + i2c_w_mask(ov, 0x4e, enable?0x80:0x60, 0xe0); + i2c_w_mask(ov, 0x29, enable?0x08:0x00, 0x08); + i2c_w_mask(ov, 0x28, enable?0x02:0x00, 0x02); + break; + case SEN_OV7610: + case SEN_OV76BE: + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_backlight"); + return -EINVAL; + } + + ov->backlight = enable; + + return 0; +} + +static int +sensor_set_mirror(struct usb_ov511 *ov, int enable) +{ + PDEBUG(4, " (%s)", enable ? "turn on" : "turn off"); + + switch (ov->sensor) { + case SEN_OV6620: + case SEN_OV6630: + case SEN_OV7610: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + i2c_w_mask(ov, 0x12, enable?0x40:0x00, 0x40); + break; + case SEN_KS0127: + case SEN_KS0127B: + case SEN_SAA7111A: + PDEBUG(5, "Unsupported with this sensor"); + return -EPERM; + default: + err("Sensor not supported for set_mirror"); + return -EINVAL; + } + + ov->mirror = enable; + + return 0; +} + +/* Returns number of bits per pixel (regardless of where they are located; + * planar or not), or zero for unsupported format. + */ +static inline int +get_depth(int palette) +{ + switch (palette) { + case VIDEO_PALETTE_GREY: return 8; + case VIDEO_PALETTE_YUV420: return 12; + case VIDEO_PALETTE_YUV420P: return 12; /* Planar */ + default: return 0; /* Invalid format */ + } +} + +/* Bytes per frame. Used by read(). Return of 0 indicates error */ +static inline long int +get_frame_length(struct ov511_frame *frame) +{ + if (!frame) + return 0; + else + return ((frame->width * frame->height + * get_depth(frame->format)) >> 3); +} + +static int +mode_init_ov_sensor_regs(struct usb_ov511 *ov, int width, int height, + int mode, int sub_flag, int qvga) +{ + int clock; + + /******** Mode (VGA/QVGA) and sensor specific regs ********/ + + switch (ov->sensor) { + case SEN_OV7610: + i2c_w(ov, 0x14, qvga?0x24:0x04); +// FIXME: Does this improve the image quality or frame rate? +#if 0 + i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); + i2c_w(ov, 0x24, 0x10); + i2c_w(ov, 0x25, qvga?0x40:0x8a); + i2c_w(ov, 0x2f, qvga?0x30:0xb0); + i2c_w(ov, 0x35, qvga?0x1c:0x9c); +#endif + break; + case SEN_OV7620: +// i2c_w(ov, 0x2b, 0x00); + i2c_w(ov, 0x14, qvga?0xa4:0x84); + i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); + i2c_w(ov, 0x24, qvga?0x20:0x3a); + i2c_w(ov, 0x25, qvga?0x30:0x60); + i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40); + i2c_w_mask(ov, 0x67, qvga?0xf0:0x90, 0xf0); + i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20); + break; + case SEN_OV76BE: +// i2c_w(ov, 0x2b, 0x00); + i2c_w(ov, 0x14, qvga?0xa4:0x84); +// FIXME: Enable this once 7620AE uses 7620 initial settings +#if 0 + i2c_w_mask(ov, 0x28, qvga?0x00:0x20, 0x20); + i2c_w(ov, 0x24, qvga?0x20:0x3a); + i2c_w(ov, 0x25, qvga?0x30:0x60); + i2c_w_mask(ov, 0x2d, qvga?0x40:0x00, 0x40); + i2c_w_mask(ov, 0x67, qvga?0xb0:0x90, 0xf0); + i2c_w_mask(ov, 0x74, qvga?0x20:0x00, 0x20); +#endif + break; + case SEN_OV6620: + i2c_w(ov, 0x14, qvga?0x24:0x04); + break; + case SEN_OV6630: + i2c_w(ov, 0x14, qvga?0xa0:0x80); + break; + default: + err("Invalid sensor"); + return -EINVAL; + } + + /******** Palette-specific regs ********/ + + if (mode == VIDEO_PALETTE_GREY) { + if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { + /* these aren't valid on the OV6620/OV7620/6630? */ + i2c_w_mask(ov, 0x0e, 0x40, 0x40); + } + + if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518 + && ov518_color) { + i2c_w_mask(ov, 0x12, 0x00, 0x10); + i2c_w_mask(ov, 0x13, 0x00, 0x20); + } else { + i2c_w_mask(ov, 0x13, 0x20, 0x20); + } + } else { + if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { + /* not valid on the OV6620/OV7620/6630? */ + i2c_w_mask(ov, 0x0e, 0x00, 0x40); + } + + /* The OV518 needs special treatment. Although both the OV518 + * and the OV6630 support a 16-bit video bus, only the 8 bit Y + * bus is actually used. The UV bus is tied to ground. + * Therefore, the OV6630 needs to be in 8-bit multiplexed + * output mode */ + + if (ov->sensor == SEN_OV6630 && ov->bridge == BRG_OV518 + && ov518_color) { + i2c_w_mask(ov, 0x12, 0x10, 0x10); + i2c_w_mask(ov, 0x13, 0x20, 0x20); + } else { + i2c_w_mask(ov, 0x13, 0x00, 0x20); + } + } + + /******** Clock programming ********/ + + /* The OV6620 needs special handling. This prevents the + * severe banding that normally occurs */ + if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) + { + /* Clock down */ + + i2c_w(ov, 0x2a, 0x04); + + if (ov->compress) { +// clock = 0; /* This ensures the highest frame rate */ + clock = 3; + } else if (clockdiv == -1) { /* If user didn't override it */ + clock = 3; /* Gives better exposure time */ + } else { + clock = clockdiv; + } + + PDEBUG(4, "Setting clock divisor to %d", clock); + + i2c_w(ov, 0x11, clock); + + i2c_w(ov, 0x2a, 0x84); + /* This next setting is critical. It seems to improve + * the gain or the contrast. The "reserved" bits seem + * to have some effect in this case. */ + i2c_w(ov, 0x2d, 0x85); + } + else + { + if (ov->compress) { + clock = 1; /* This ensures the highest frame rate */ + } else if (clockdiv == -1) { /* If user didn't override it */ + /* Calculate and set the clock divisor */ + clock = ((sub_flag ? ov->subw * ov->subh + : width * height) + * (mode == VIDEO_PALETTE_GREY ? 2 : 3) / 2) + / 66000; + } else { + clock = clockdiv; + } + + PDEBUG(4, "Setting clock divisor to %d", clock); + + i2c_w(ov, 0x11, clock); + } + + /******** Special Features ********/ + + if (framedrop >= 0) + i2c_w(ov, 0x16, framedrop); + + /* Test Pattern */ + i2c_w_mask(ov, 0x12, (testpat?0x02:0x00), 0x02); + + /* Enable auto white balance */ + i2c_w_mask(ov, 0x12, 0x04, 0x04); + + // This will go away as soon as ov51x_mode_init_sensor_regs() + // is fully tested. + /* 7620/6620/6630? don't have register 0x35, so play it safe */ + if (ov->sensor == SEN_OV7610 || ov->sensor == SEN_OV76BE) { + if (width == 640 && height == 480) + i2c_w(ov, 0x35, 0x9e); + else + i2c_w(ov, 0x35, 0x1e); + } + + return 0; +} + +static int +set_ov_sensor_window(struct usb_ov511 *ov, int width, int height, int mode, + int sub_flag) +{ + int ret; + int hwsbase, hwebase, vwsbase, vwebase, hwsize, vwsize; + int hoffset, voffset, hwscale = 0, vwscale = 0; + + /* The different sensor ICs handle setting up of window differently. + * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!!! */ + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV76BE: + hwsbase = 0x38; + hwebase = 0x3a; + vwsbase = vwebase = 0x05; + break; + case SEN_OV6620: + case SEN_OV6630: + hwsbase = 0x38; + hwebase = 0x3a; + vwsbase = 0x05; + vwebase = 0x06; + break; + case SEN_OV7620: + hwsbase = 0x2f; /* From 7620.SET (spec is wrong) */ + hwebase = 0x2f; + vwsbase = vwebase = 0x05; + break; + default: + err("Invalid sensor"); + return -EINVAL; + } + + if (ov->sensor == SEN_OV6620 || ov->sensor == SEN_OV6630) { + /* Note: OV518(+) does downsample on its own) */ + if ((width > 176 && height > 144) + || ov->bclass == BCL_OV518) { /* CIF */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 0); + if (ret < 0) + return ret; + hwscale = 1; + vwscale = 1; /* The datasheet says 0; it's wrong */ + hwsize = 352; + vwsize = 288; + } else if (width > 176 || height > 144) { + err("Illegal dimensions"); + return -EINVAL; + } else { /* QCIF */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 1); + if (ret < 0) + return ret; + hwsize = 176; + vwsize = 144; + } + } else { + if (width > 320 && height > 240) { /* VGA */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 0); + if (ret < 0) + return ret; + hwscale = 2; + vwscale = 1; + hwsize = 640; + vwsize = 480; + } else if (width > 320 || height > 240) { + err("Illegal dimensions"); + return -EINVAL; + } else { /* QVGA */ + ret = mode_init_ov_sensor_regs(ov, width, height, + mode, sub_flag, 1); + if (ret < 0) + return ret; + hwscale = 1; + hwsize = 320; + vwsize = 240; + } + } + + /* Center the window */ + hoffset = ((hwsize - width) / 2) >> hwscale; + voffset = ((vwsize - height) / 2) >> vwscale; + + /* FIXME! - This needs to be changed to support 160x120 and 6620!!! */ + if (sub_flag) { + i2c_w(ov, 0x17, hwsbase+(ov->subx>>hwscale)); + i2c_w(ov, 0x18, hwebase+((ov->subx+ov->subw)>>hwscale)); + i2c_w(ov, 0x19, vwsbase+(ov->suby>>vwscale)); + i2c_w(ov, 0x1a, vwebase+((ov->suby+ov->subh)>>vwscale)); + } else { + i2c_w(ov, 0x17, hwsbase + hoffset); + i2c_w(ov, 0x18, hwebase + hoffset + (hwsize>>hwscale)); + i2c_w(ov, 0x19, vwsbase + voffset); + i2c_w(ov, 0x1a, vwebase + voffset + (vwsize>>vwscale)); + } + +#ifdef OV511_DEBUG + if (dump_sensor) + dump_i2c_regs(ov); +#endif + + return 0; +} + +/* Set up the OV511/OV511+ with the given image parameters. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int +ov511_mode_init_regs(struct usb_ov511 *ov, + int width, int height, int mode, int sub_flag) +{ + int hsegs, vsegs; + + if (sub_flag) { + width = ov->subw; + height = ov->subh; + } + + PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d", + width, height, mode, sub_flag); + + // FIXME: This should be moved to a 7111a-specific function once + // subcapture is dealt with properly + if (ov->sensor == SEN_SAA7111A) { + if (width == 320 && height == 240) { + /* No need to do anything special */ + } else if (width == 640 && height == 480) { + /* Set the OV511 up as 320x480, but keep the + * V4L resolution as 640x480 */ + width = 320; + } else { + err("SAA7111A only allows 320x240 or 640x480"); + return -EINVAL; + } + } + + /* Make sure width and height are a multiple of 8 */ + if (width % 8 || height % 8) { + err("Invalid size (%d, %d) (mode = %d)", width, height, mode); + return -EINVAL; + } + + if (width < ov->minwidth || height < ov->minheight) { + err("Requested dimensions are too small"); + return -EINVAL; + } + + if (ov51x_stop(ov) < 0) + return -EIO; + + if (mode == VIDEO_PALETTE_GREY) { + reg_w(ov, R511_CAM_UV_EN, 0x00); + reg_w(ov, R511_SNAP_UV_EN, 0x00); + reg_w(ov, R511_SNAP_OPTS, 0x01); + } else { + reg_w(ov, R511_CAM_UV_EN, 0x01); + reg_w(ov, R511_SNAP_UV_EN, 0x01); + reg_w(ov, R511_SNAP_OPTS, 0x03); + } + + /* Here I'm assuming that snapshot size == image size. + * I hope that's always true. --claudio + */ + hsegs = (width >> 3) - 1; + vsegs = (height >> 3) - 1; + + reg_w(ov, R511_CAM_PXCNT, hsegs); + reg_w(ov, R511_CAM_LNCNT, vsegs); + reg_w(ov, R511_CAM_PXDIV, 0x00); + reg_w(ov, R511_CAM_LNDIV, 0x00); + + /* YUV420, low pass filter on */ + reg_w(ov, R511_CAM_OPTS, 0x03); + + /* Snapshot additions */ + reg_w(ov, R511_SNAP_PXCNT, hsegs); + reg_w(ov, R511_SNAP_LNCNT, vsegs); + reg_w(ov, R511_SNAP_PXDIV, 0x00); + reg_w(ov, R511_SNAP_LNDIV, 0x00); + + if (ov->compress) { + /* Enable Y and UV quantization and compression */ + reg_w(ov, R511_COMP_EN, 0x07); + reg_w(ov, R511_COMP_LUT_EN, 0x03); + ov51x_reset(ov, OV511_RESET_OMNICE); + } + + if (ov51x_restart(ov) < 0) + return -EIO; + + return 0; +} + +/* Sets up the OV518/OV518+ with the given image parameters + * + * OV518 needs a completely different approach, until we can figure out what + * the individual registers do. Also, only 15 FPS is supported now. + * + * Do not put any sensor-specific code in here (including I2C I/O functions) + */ +static int +ov518_mode_init_regs(struct usb_ov511 *ov, + int width, int height, int mode, int sub_flag) +{ + int hsegs, vsegs, hi_res; + + if (sub_flag) { + width = ov->subw; + height = ov->subh; + } + + PDEBUG(3, "width:%d, height:%d, mode:%d, sub:%d", + width, height, mode, sub_flag); + + if (width % 16 || height % 8) { + err("Invalid size (%d, %d)", width, height); + return -EINVAL; + } + + if (width < ov->minwidth || height < ov->minheight) { + err("Requested dimensions are too small"); + return -EINVAL; + } + + if (width >= 320 && height >= 240) { + hi_res = 1; + } else if (width >= 320 || height >= 240) { + err("Invalid width/height combination (%d, %d)", width, height); + return -EINVAL; + } else { + hi_res = 0; + } + + if (ov51x_stop(ov) < 0) + return -EIO; + + /******** Set the mode ********/ + + reg_w(ov, 0x2b, 0); + reg_w(ov, 0x2c, 0); + reg_w(ov, 0x2d, 0); + reg_w(ov, 0x2e, 0); + reg_w(ov, 0x3b, 0); + reg_w(ov, 0x3c, 0); + reg_w(ov, 0x3d, 0); + reg_w(ov, 0x3e, 0); + + if (ov->bridge == BRG_OV518 && ov518_color) { + /* OV518 needs U and V swapped */ + i2c_w_mask(ov, 0x15, 0x00, 0x01); + + if (mode == VIDEO_PALETTE_GREY) { + /* Set 16-bit input format (UV data are ignored) */ + reg_w_mask(ov, 0x20, 0x00, 0x08); + + /* Set 8-bit (4:0:0) output format */ + reg_w_mask(ov, 0x28, 0x00, 0xf0); + reg_w_mask(ov, 0x38, 0x00, 0xf0); + } else { + /* Set 8-bit (YVYU) input format */ + reg_w_mask(ov, 0x20, 0x08, 0x08); + + /* Set 12-bit (4:2:0) output format */ + reg_w_mask(ov, 0x28, 0x80, 0xf0); + reg_w_mask(ov, 0x38, 0x80, 0xf0); + } + } else { + reg_w(ov, 0x28, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80); + reg_w(ov, 0x38, (mode == VIDEO_PALETTE_GREY) ? 0x00:0x80); + } + + hsegs = width / 16; + vsegs = height / 4; + + reg_w(ov, 0x29, hsegs); + reg_w(ov, 0x2a, vsegs); + + reg_w(ov, 0x39, hsegs); + reg_w(ov, 0x3a, vsegs); + + /* Windows driver does this here; who knows why */ + reg_w(ov, 0x2f, 0x80); + + /******** Set the framerate (to 15 FPS) ********/ + + /* Mode independent, but framerate dependent, regs */ + reg_w(ov, 0x51, 0x02); /* Clock divider; lower==faster */ + reg_w(ov, 0x22, 0x18); + reg_w(ov, 0x23, 0xff); + + if (ov->bridge == BRG_OV518PLUS) + reg_w(ov, 0x21, 0x19); + else + reg_w(ov, 0x71, 0x19); /* Compression-related? */ + + // FIXME: Sensor-specific + /* Bit 5 is what matters here. Of course, it is "reserved" */ + i2c_w(ov, 0x54, 0x23); + + reg_w(ov, 0x2f, 0x80); + + if (ov->bridge == BRG_OV518PLUS) { + reg_w(ov, 0x24, 0x94); + reg_w(ov, 0x25, 0x90); + ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(ov, 0xc6, 540, 2); /* 21ch */ + ov518_reg_w32(ov, 0xc7, 540, 2); /* 21ch */ + ov518_reg_w32(ov, 0xc8, 108, 2); /* 6ch */ + ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */ + ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */ + ov518_reg_w32(ov, 0xcc, 2400, 2); /* 960h */ + ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */ + ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */ + } else { + reg_w(ov, 0x24, 0x9f); + reg_w(ov, 0x25, 0x90); + ov518_reg_w32(ov, 0xc4, 400, 2); /* 190h */ + ov518_reg_w32(ov, 0xc6, 500, 2); /* 1f4h */ + ov518_reg_w32(ov, 0xc7, 500, 2); /* 1f4h */ + ov518_reg_w32(ov, 0xc8, 142, 2); /* 8eh */ + ov518_reg_w32(ov, 0xca, 131098, 3); /* 2001ah */ + ov518_reg_w32(ov, 0xcb, 532, 2); /* 214h */ + ov518_reg_w32(ov, 0xcc, 2000, 2); /* 7d0h */ + ov518_reg_w32(ov, 0xcd, 32, 2); /* 20h */ + ov518_reg_w32(ov, 0xce, 608, 2); /* 260h */ + } + + reg_w(ov, 0x2f, 0x80); + + if (ov51x_restart(ov) < 0) + return -EIO; + + /* Reset it just for good measure */ + if (ov51x_reset(ov, OV511_RESET_NOREGS) < 0) + return -EIO; + + return 0; +} + +/* This is a wrapper around the OV511, OV518, and sensor specific functions */ +static int +mode_init_regs(struct usb_ov511 *ov, + int width, int height, int mode, int sub_flag) +{ + int rc = 0; + + if (!ov || !ov->dev) + return -EFAULT; + + if (ov->bclass == BCL_OV518) { + rc = ov518_mode_init_regs(ov, width, height, mode, sub_flag); + } else { + rc = ov511_mode_init_regs(ov, width, height, mode, sub_flag); + } + + if (FATAL_ERROR(rc)) + return rc; + + switch (ov->sensor) { + case SEN_OV7610: + case SEN_OV7620: + case SEN_OV76BE: + case SEN_OV8600: + case SEN_OV6620: + case SEN_OV6630: + rc = set_ov_sensor_window(ov, width, height, mode, sub_flag); + break; + case SEN_KS0127: + case SEN_KS0127B: + err("KS0127-series decoders not supported yet"); + rc = -EINVAL; + break; + case SEN_SAA7111A: +// rc = mode_init_saa_sensor_regs(ov, width, height, mode, +// sub_flag); + + PDEBUG(1, "SAA status = 0x%02X", i2c_r(ov, 0x1f)); + break; + default: + err("Unknown sensor"); + rc = -EINVAL; + } + + if (FATAL_ERROR(rc)) + return rc; + + /* Sensor-independent settings */ + rc = sensor_set_auto_brightness(ov, ov->auto_brt); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_auto_exposure(ov, ov->auto_exp); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_banding_filter(ov, bandingfilter); + if (FATAL_ERROR(rc)) + return rc; + + if (ov->lightfreq) { + rc = sensor_set_light_freq(ov, lightfreq); + if (FATAL_ERROR(rc)) + return rc; + } + + rc = sensor_set_backlight(ov, ov->backlight); + if (FATAL_ERROR(rc)) + return rc; + + rc = sensor_set_mirror(ov, ov->mirror); + if (FATAL_ERROR(rc)) + return rc; + + return 0; +} + +/* This sets the default image parameters. This is useful for apps that use + * read() and do not set these. + */ +static int +ov51x_set_default_params(struct usb_ov511 *ov) +{ + int i; + + /* Set default sizes in case IOCTL (VIDIOCMCAPTURE) is not used + * (using read() instead). */ + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].width = ov->maxwidth; + ov->frame[i].height = ov->maxheight; + ov->frame[i].bytes_read = 0; + if (force_palette) + ov->frame[i].format = force_palette; + else + ov->frame[i].format = VIDEO_PALETTE_YUV420; + + ov->frame[i].depth = get_depth(ov->frame[i].format); + } + + PDEBUG(3, "%dx%d, %s", ov->maxwidth, ov->maxheight, + symbolic(v4l1_plist, ov->frame[0].format)); + + /* Initialize to max width/height, YUV420 or RGB24 (if supported) */ + if (mode_init_regs(ov, ov->maxwidth, ov->maxheight, + ov->frame[0].format, 0) < 0) + return -EINVAL; + + return 0; +} + +/********************************************************************** + * + * Video decoder stuff + * + **********************************************************************/ + +/* Set analog input port of decoder */ +static int +decoder_set_input(struct usb_ov511 *ov, int input) +{ + PDEBUG(4, "port %d", input); + + switch (ov->sensor) { + case SEN_SAA7111A: + { + /* Select mode */ + i2c_w_mask(ov, 0x02, input, 0x07); + /* Bypass chrominance trap for modes 4..7 */ + i2c_w_mask(ov, 0x09, (input > 3) ? 0x80:0x00, 0x80); + break; + } + default: + return -EINVAL; + } + + return 0; +} + +/* Get ASCII name of video input */ +static int +decoder_get_input_name(struct usb_ov511 *ov, int input, char *name) +{ + switch (ov->sensor) { + case SEN_SAA7111A: + { + if (input < 0 || input > 7) + return -EINVAL; + else if (input < 4) + sprintf(name, "CVBS-%d", input); + else // if (input < 8) + sprintf(name, "S-Video-%d", input - 4); + break; + } + default: + sprintf(name, "%s", "Camera"); + } + + return 0; +} + +/* Set norm (NTSC, PAL, SECAM, AUTO) */ +static int +decoder_set_norm(struct usb_ov511 *ov, int norm) +{ + PDEBUG(4, "%d", norm); + + switch (ov->sensor) { + case SEN_SAA7111A: + { + int reg_8, reg_e; + + if (norm == VIDEO_MODE_NTSC) { + reg_8 = 0x40; /* 60 Hz */ + reg_e = 0x00; /* NTSC M / PAL BGHI */ + } else if (norm == VIDEO_MODE_PAL) { + reg_8 = 0x00; /* 50 Hz */ + reg_e = 0x00; /* NTSC M / PAL BGHI */ + } else if (norm == VIDEO_MODE_AUTO) { + reg_8 = 0x80; /* Auto field detect */ + reg_e = 0x00; /* NTSC M / PAL BGHI */ + } else if (norm == VIDEO_MODE_SECAM) { + reg_8 = 0x00; /* 50 Hz */ + reg_e = 0x50; /* SECAM / PAL 4.43 */ + } else { + return -EINVAL; + } + + i2c_w_mask(ov, 0x08, reg_8, 0xc0); + i2c_w_mask(ov, 0x0e, reg_e, 0x70); + break; + } + default: + return -EINVAL; + } + + return 0; +} + +/********************************************************************** + * + * Raw data parsing + * + **********************************************************************/ + +/* Copies a 64-byte segment at pIn to an 8x8 block at pOut. The width of the + * image at pOut is specified by w. + */ +static inline void +make_8x8(unsigned char *pIn, unsigned char *pOut, int w) +{ + unsigned char *pOut1 = pOut; + int x, y; + + for (y = 0; y < 8; y++) { + pOut1 = pOut; + for (x = 0; x < 8; x++) { + *pOut1++ = *pIn++; + } + pOut += w; + } +} + +/* + * For RAW BW (YUV 4:0:0) images, data show up in 256 byte segments. + * The segments represent 4 squares of 8x8 pixels as follows: + * + * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199 + * 8 9 ... 15 72 73 ... 79 200 201 ... 207 + * ... ... ... + * 56 57 ... 63 120 121 ... 127 248 249 ... 255 + * + */ +static void +yuv400raw_to_yuv400p(struct ov511_frame *frame, + unsigned char *pIn0, unsigned char *pOut0) +{ + int x, y; + unsigned char *pIn, *pOut, *pOutLine; + + /* Copy Y */ + pIn = pIn0; + pOutLine = pOut0; + for (y = 0; y < frame->rawheight - 1; y += 8) { + pOut = pOutLine; + for (x = 0; x < frame->rawwidth - 1; x += 8) { + make_8x8(pIn, pOut, frame->rawwidth); + pIn += 64; + pOut += 8; + } + pOutLine += 8 * frame->rawwidth; + } +} + +/* + * For YUV 4:2:0 images, the data show up in 384 byte segments. + * The first 64 bytes of each segment are U, the next 64 are V. The U and + * V are arranged as follows: + * + * 0 1 ... 7 + * 8 9 ... 15 + * ... + * 56 57 ... 63 + * + * U and V are shipped at half resolution (1 U,V sample -> one 2x2 block). + * + * The next 256 bytes are full resolution Y data and represent 4 squares + * of 8x8 pixels as follows: + * + * 0 1 ... 7 64 65 ... 71 ... 192 193 ... 199 + * 8 9 ... 15 72 73 ... 79 200 201 ... 207 + * ... ... ... + * 56 57 ... 63 120 121 ... 127 ... 248 249 ... 255 + * + * Note that the U and V data in one segment represent a 16 x 16 pixel + * area, but the Y data represent a 32 x 8 pixel area. If the width is not an + * even multiple of 32, the extra 8x8 blocks within a 32x8 block belong to the + * next horizontal stripe. + * + * If dumppix module param is set, _parse_data just dumps the incoming segments, + * verbatim, in order, into the frame. When used with vidcat -f ppm -s 640x480 + * this puts the data on the standard output and can be analyzed with the + * parseppm.c utility I wrote. That's a much faster way for figuring out how + * these data are scrambled. + */ + +/* Converts from raw, uncompressed segments at pIn0 to a YUV420P frame at pOut0. + * + * FIXME: Currently only handles width and height that are multiples of 16 + */ +static void +yuv420raw_to_yuv420p(struct ov511_frame *frame, + unsigned char *pIn0, unsigned char *pOut0) +{ + int k, x, y; + unsigned char *pIn, *pOut, *pOutLine; + const unsigned int a = frame->rawwidth * frame->rawheight; + const unsigned int w = frame->rawwidth / 2; + + /* Copy U and V */ + pIn = pIn0; + pOutLine = pOut0 + a; + for (y = 0; y < frame->rawheight - 1; y += 16) { + pOut = pOutLine; + for (x = 0; x < frame->rawwidth - 1; x += 16) { + make_8x8(pIn, pOut, w); + make_8x8(pIn + 64, pOut + a/4, w); + pIn += 384; + pOut += 8; + } + pOutLine += 8 * w; + } + + /* Copy Y */ + pIn = pIn0 + 128; + pOutLine = pOut0; + k = 0; + for (y = 0; y < frame->rawheight - 1; y += 8) { + pOut = pOutLine; + for (x = 0; x < frame->rawwidth - 1; x += 8) { + make_8x8(pIn, pOut, frame->rawwidth); + pIn += 64; + pOut += 8; + if ((++k) > 3) { + k = 0; + pIn += 128; + } + } + pOutLine += 8 * frame->rawwidth; + } +} + +/********************************************************************** + * + * Decompression + * + **********************************************************************/ + +static int +request_decompressor(struct usb_ov511 *ov) +{ + if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) { + err("No decompressor available"); + } else { + err("Unknown bridge"); + } + + return -ENOSYS; +} + +static void +decompress(struct usb_ov511 *ov, struct ov511_frame *frame, + unsigned char *pIn0, unsigned char *pOut0) +{ + if (!ov->decomp_ops) + if (request_decompressor(ov)) + return; + +} + +/********************************************************************** + * + * Format conversion + * + **********************************************************************/ + +/* Fuses even and odd fields together, and doubles width. + * INPUT: an odd field followed by an even field at pIn0, in YUV planar format + * OUTPUT: a normal YUV planar image, with correct aspect ratio + */ +static void +deinterlace(struct ov511_frame *frame, int rawformat, + unsigned char *pIn0, unsigned char *pOut0) +{ + const int fieldheight = frame->rawheight / 2; + const int fieldpix = fieldheight * frame->rawwidth; + const int w = frame->width; + int x, y; + unsigned char *pInEven, *pInOdd, *pOut; + + PDEBUG(5, "fieldheight=%d", fieldheight); + + if (frame->rawheight != frame->height) { + err("invalid height"); + return; + } + + if ((frame->rawwidth * 2) != frame->width) { + err("invalid width"); + return; + } + + /* Y */ + pInOdd = pIn0; + pInEven = pInOdd + fieldpix; + pOut = pOut0; + for (y = 0; y < fieldheight; y++) { + for (x = 0; x < frame->rawwidth; x++) { + *pOut = *pInEven; + *(pOut+1) = *pInEven++; + *(pOut+w) = *pInOdd; + *(pOut+w+1) = *pInOdd++; + pOut += 2; + } + pOut += w; + } + + if (rawformat == RAWFMT_YUV420) { + /* U */ + pInOdd = pIn0 + fieldpix * 2; + pInEven = pInOdd + fieldpix / 4; + for (y = 0; y < fieldheight / 2; y++) { + for (x = 0; x < frame->rawwidth / 2; x++) { + *pOut = *pInEven; + *(pOut+1) = *pInEven++; + *(pOut+w/2) = *pInOdd; + *(pOut+w/2+1) = *pInOdd++; + pOut += 2; + } + pOut += w/2; + } + /* V */ + pInOdd = pIn0 + fieldpix * 2 + fieldpix / 2; + pInEven = pInOdd + fieldpix / 4; + for (y = 0; y < fieldheight / 2; y++) { + for (x = 0; x < frame->rawwidth / 2; x++) { + *pOut = *pInEven; + *(pOut+1) = *pInEven++; + *(pOut+w/2) = *pInOdd; + *(pOut+w/2+1) = *pInOdd++; + pOut += 2; + } + pOut += w/2; + } + } +} + +static void +ov51x_postprocess_grey(struct usb_ov511 *ov, struct ov511_frame *frame) +{ + /* Deinterlace frame, if necessary */ + if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, + frame->tempdata); + else + yuv400raw_to_yuv400p(frame, frame->rawdata, + frame->tempdata); + + deinterlace(frame, RAWFMT_YUV400, frame->tempdata, + frame->data); + } else { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, + frame->data); + else + yuv400raw_to_yuv400p(frame, frame->rawdata, + frame->data); + } +} + +/* Process raw YUV420 data into standard YUV420P */ +static void +ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct ov511_frame *frame) +{ + /* Deinterlace frame, if necessary */ + if (ov->sensor == SEN_SAA7111A && frame->rawheight >= 480) { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, frame->tempdata); + else + yuv420raw_to_yuv420p(frame, frame->rawdata, + frame->tempdata); + + deinterlace(frame, RAWFMT_YUV420, frame->tempdata, + frame->data); + } else { + if (frame->compressed) + decompress(ov, frame, frame->rawdata, frame->data); + else + yuv420raw_to_yuv420p(frame, frame->rawdata, + frame->data); + } +} + +/* Post-processes the specified frame. This consists of: + * 1. Decompress frame, if necessary + * 2. Deinterlace frame and scale to proper size, if necessary + * 3. Convert from YUV planar to destination format, if necessary + * 4. Fix the RGB offset, if necessary + */ +static void +ov51x_postprocess(struct usb_ov511 *ov, struct ov511_frame *frame) +{ + if (dumppix) { + memset(frame->data, 0, + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)); + PDEBUG(4, "Dumping %d bytes", frame->bytes_recvd); + memcpy(frame->data, frame->rawdata, frame->bytes_recvd); + } else { + switch (frame->format) { + case VIDEO_PALETTE_GREY: + ov51x_postprocess_grey(ov, frame); + break; + case VIDEO_PALETTE_YUV420: + case VIDEO_PALETTE_YUV420P: + ov51x_postprocess_yuv420(ov, frame); + break; + default: + err("Cannot convert data to %s", + symbolic(v4l1_plist, frame->format)); + } + } +} + +/********************************************************************** + * + * OV51x data transfer, IRQ handler + * + **********************************************************************/ + +static inline void +ov511_move_data(struct usb_ov511 *ov, unsigned char *in, int n) +{ + int num, offset; + int pnum = in[ov->packet_size - 1]; /* Get packet number */ + int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight); + struct ov511_frame *frame = &ov->frame[ov->curframe]; + struct timeval *ts; + + /* SOF/EOF packets have 1st to 8th bytes zeroed and the 9th + * byte non-zero. The EOF packet has image width/height in the + * 10th and 11th bytes. The 9th byte is given as follows: + * + * bit 7: EOF + * 6: compression enabled + * 5: 422/420/400 modes + * 4: 422/420/400 modes + * 3: 1 + * 2: snapshot button on + * 1: snapshot frame + * 0: even/odd field + */ + + if (printph) { + info("ph(%3d): %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x %2x", + pnum, in[0], in[1], in[2], in[3], in[4], in[5], in[6], + in[7], in[8], in[9], in[10], in[11]); + } + + /* Check for SOF/EOF packet */ + if ((in[0] | in[1] | in[2] | in[3] | in[4] | in[5] | in[6] | in[7]) || + (~in[8] & 0x08)) + goto check_middle; + + /* Frame end */ + if (in[8] & 0x80) { + ts = (struct timeval *)(frame->data + + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight)); + do_gettimeofday(ts); + + /* Get the actual frame size from the EOF header */ + frame->rawwidth = ((int)(in[9]) + 1) * 8; + frame->rawheight = ((int)(in[10]) + 1) * 8; + + PDEBUG(4, "Frame end, frame=%d, pnum=%d, w=%d, h=%d, recvd=%d", + ov->curframe, pnum, frame->rawwidth, frame->rawheight, + frame->bytes_recvd); + + /* Validate the header data */ + RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth); + RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, + ov->maxheight); + + /* Don't allow byte count to exceed buffer size */ + RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw); + + if (frame->scanstate == STATE_LINES) { + int nextf; + + frame->grabstate = FRAME_DONE; + wake_up_interruptible(&frame->wq); + + /* If next frame is ready or grabbing, + * point to it */ + nextf = (ov->curframe + 1) % OV511_NUMFRAMES; + if (ov->frame[nextf].grabstate == FRAME_READY + || ov->frame[nextf].grabstate == FRAME_GRABBING) { + ov->curframe = nextf; + ov->frame[nextf].scanstate = STATE_SCANNING; + } else { + if (frame->grabstate == FRAME_DONE) { + PDEBUG(4, "** Frame done **"); + } else { + PDEBUG(4, "Frame not ready? state = %d", + ov->frame[nextf].grabstate); + } + + ov->curframe = -1; + } + } else { + PDEBUG(5, "Frame done, but not scanning"); + } + /* Image corruption caused by misplaced frame->segment = 0 + * fixed by carlosf@conectiva.com.br + */ + } else { + /* Frame start */ + PDEBUG(4, "Frame start, framenum = %d", ov->curframe); + + /* Check to see if it's a snapshot frame */ + /* FIXME?? Should the snapshot reset go here? Performance? */ + if (in[8] & 0x02) { + frame->snapshot = 1; + PDEBUG(3, "snapshot detected"); + } + + frame->scanstate = STATE_LINES; + frame->bytes_recvd = 0; + frame->compressed = in[8] & 0x40; + } + +check_middle: + /* Are we in a frame? */ + if (frame->scanstate != STATE_LINES) { + PDEBUG(5, "Not in a frame; packet skipped"); + return; + } + + /* If frame start, skip header */ + if (frame->bytes_recvd == 0) + offset = 9; + else + offset = 0; + + num = n - offset - 1; + + /* Dump all data exactly as received */ + if (dumppix == 2) { + frame->bytes_recvd += n - 1; + if (frame->bytes_recvd <= max_raw) + memcpy(frame->rawdata + frame->bytes_recvd - (n - 1), + in, n - 1); + else + PDEBUG(3, "Raw data buffer overrun!! (%d)", + frame->bytes_recvd - max_raw); + } else if (!frame->compressed && !remove_zeros) { + frame->bytes_recvd += num; + if (frame->bytes_recvd <= max_raw) + memcpy(frame->rawdata + frame->bytes_recvd - num, + in + offset, num); + else + PDEBUG(3, "Raw data buffer overrun!! (%d)", + frame->bytes_recvd - max_raw); + } else { /* Remove all-zero FIFO lines (aligned 32-byte blocks) */ + int b, read = 0, allzero, copied = 0; + if (offset) { + frame->bytes_recvd += 32 - offset; // Bytes out + memcpy(frame->rawdata, in + offset, 32 - offset); + read += 32; + } + + while (read < n - 1) { + allzero = 1; + for (b = 0; b < 32; b++) { + if (in[read + b]) { + allzero = 0; + break; + } + } + + if (allzero) { + /* Don't copy it */ + } else { + if (frame->bytes_recvd + copied + 32 <= max_raw) + { + memcpy(frame->rawdata + + frame->bytes_recvd + copied, + in + read, 32); + copied += 32; + } else { + PDEBUG(3, "Raw data buffer overrun!!"); + } + } + read += 32; + } + + frame->bytes_recvd += copied; + } +} + +static inline void +ov518_move_data(struct usb_ov511 *ov, unsigned char *in, int n) +{ + int max_raw = MAX_RAW_DATA_SIZE(ov->maxwidth, ov->maxheight); + struct ov511_frame *frame = &ov->frame[ov->curframe]; + struct timeval *ts; + + /* Don't copy the packet number byte */ + if (ov->packet_numbering) + --n; + + /* A false positive here is likely, until OVT gives me + * the definitive SOF/EOF format */ + if ((!(in[0] | in[1] | in[2] | in[3] | in[5])) && in[6]) { + if (printph) { + info("ph: %2x %2x %2x %2x %2x %2x %2x %2x", in[0], + in[1], in[2], in[3], in[4], in[5], in[6], in[7]); + } + + if (frame->scanstate == STATE_LINES) { + PDEBUG(4, "Detected frame end/start"); + goto eof; + } else { //scanstate == STATE_SCANNING + /* Frame start */ + PDEBUG(4, "Frame start, framenum = %d", ov->curframe); + goto sof; + } + } else { + goto check_middle; + } + +eof: + ts = (struct timeval *)(frame->data + + MAX_FRAME_SIZE(ov->maxwidth, ov->maxheight)); + do_gettimeofday(ts); + + PDEBUG(4, "Frame end, curframe = %d, hw=%d, vw=%d, recvd=%d", + ov->curframe, + (int)(in[9]), (int)(in[10]), frame->bytes_recvd); + + // FIXME: Since we don't know the header formats yet, + // there is no way to know what the actual image size is + frame->rawwidth = frame->width; + frame->rawheight = frame->height; + + /* Validate the header data */ + RESTRICT_TO_RANGE(frame->rawwidth, ov->minwidth, ov->maxwidth); + RESTRICT_TO_RANGE(frame->rawheight, ov->minheight, ov->maxheight); + + /* Don't allow byte count to exceed buffer size */ + RESTRICT_TO_RANGE(frame->bytes_recvd, 8, max_raw); + + if (frame->scanstate == STATE_LINES) { + int nextf; + + frame->grabstate = FRAME_DONE; + wake_up_interruptible(&frame->wq); + + /* If next frame is ready or grabbing, + * point to it */ + nextf = (ov->curframe + 1) % OV511_NUMFRAMES; + if (ov->frame[nextf].grabstate == FRAME_READY + || ov->frame[nextf].grabstate == FRAME_GRABBING) { + ov->curframe = nextf; + ov->frame[nextf].scanstate = STATE_SCANNING; + frame = &ov->frame[nextf]; + } else { + if (frame->grabstate == FRAME_DONE) { + PDEBUG(4, "** Frame done **"); + } else { + PDEBUG(4, "Frame not ready? state = %d", + ov->frame[nextf].grabstate); + } + + ov->curframe = -1; + PDEBUG(4, "SOF dropped (no active frame)"); + return; /* Nowhere to store this frame */ + } + } +sof: + PDEBUG(4, "Starting capture on frame %d", frame->framenum); + +// Snapshot not reverse-engineered yet. +#if 0 + /* Check to see if it's a snapshot frame */ + /* FIXME?? Should the snapshot reset go here? Performance? */ + if (in[8] & 0x02) { + frame->snapshot = 1; + PDEBUG(3, "snapshot detected"); + } +#endif + frame->scanstate = STATE_LINES; + frame->bytes_recvd = 0; + frame->compressed = 1; + +check_middle: + /* Are we in a frame? */ + if (frame->scanstate != STATE_LINES) { + PDEBUG(4, "scanstate: no SOF yet"); + return; + } + + /* Dump all data exactly as received */ + if (dumppix == 2) { + frame->bytes_recvd += n; + if (frame->bytes_recvd <= max_raw) + memcpy(frame->rawdata + frame->bytes_recvd - n, in, n); + else + PDEBUG(3, "Raw data buffer overrun!! (%d)", + frame->bytes_recvd - max_raw); + } else { + /* All incoming data are divided into 8-byte segments. If the + * segment contains all zero bytes, it must be skipped. These + * zero-segments allow the OV518 to mainain a constant data rate + * regardless of the effectiveness of the compression. Segments + * are aligned relative to the beginning of each isochronous + * packet. The first segment in each image is a header (the + * decompressor skips it later). + */ + + int b, read = 0, allzero, copied = 0; + + while (read < n) { + allzero = 1; + for (b = 0; b < 8; b++) { + if (in[read + b]) { + allzero = 0; + break; + } + } + + if (allzero) { + /* Don't copy it */ + } else { + if (frame->bytes_recvd + copied + 8 <= max_raw) + { + memcpy(frame->rawdata + + frame->bytes_recvd + copied, + in + read, 8); + copied += 8; + } else { + PDEBUG(3, "Raw data buffer overrun!!"); + } + } + read += 8; + } + frame->bytes_recvd += copied; + } +} + +static void +ov51x_isoc_irq(struct urb *urb, struct pt_regs *regs) +{ + int i; + struct usb_ov511 *ov; + struct ov511_sbuf *sbuf; + + if (!urb->context) { + PDEBUG(4, "no context"); + return; + } + + sbuf = urb->context; + ov = sbuf->ov; + + if (!ov || !ov->dev || !ov->user) { + PDEBUG(4, "no device, or not open"); + return; + } + + if (!ov->streaming) { + PDEBUG(4, "hmmm... not streaming, but got interrupt"); + return; + } + + if (urb->status == -ENOENT || urb->status == -ECONNRESET) { + PDEBUG(4, "URB unlinked"); + return; + } + + if (urb->status != -EINPROGRESS && urb->status != 0) { + err("ERROR: urb->status=%d: %s", urb->status, + symbolic(urb_errlist, urb->status)); + } + + /* Copy the data received into our frame buffer */ + PDEBUG(5, "sbuf[%d]: Moving %d packets", sbuf->n, + urb->number_of_packets); + for (i = 0; i < urb->number_of_packets; i++) { + /* Warning: Don't call *_move_data() if no frame active! */ + if (ov->curframe >= 0) { + int n = urb->iso_frame_desc[i].actual_length; + int st = urb->iso_frame_desc[i].status; + unsigned char *cdata; + + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = 0; + + cdata = urb->transfer_buffer + + urb->iso_frame_desc[i].offset; + + if (!n) { + PDEBUG(4, "Zero-length packet"); + continue; + } + + if (st) + PDEBUG(2, "data error: [%d] len=%d, status=%d", + i, n, st); + + if (ov->bclass == BCL_OV511) + ov511_move_data(ov, cdata, n); + else if (ov->bclass == BCL_OV518) + ov518_move_data(ov, cdata, n); + else + err("Unknown bridge device (%d)", ov->bridge); + + } else if (waitqueue_active(&ov->wq)) { + wake_up_interruptible(&ov->wq); + } + } + + /* Resubmit this URB */ + urb->dev = ov->dev; + if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0) + err("usb_submit_urb() ret %d", i); + + return; +} + +/**************************************************************************** + * + * Stream initialization and termination + * + ***************************************************************************/ + +static int +ov51x_init_isoc(struct usb_ov511 *ov) +{ + struct urb *urb; + int fx, err, n, size; + + PDEBUG(3, "*** Initializing capture ***"); + + ov->curframe = -1; + + if (ov->bridge == BRG_OV511) { + if (cams == 1) + size = 993; + else if (cams == 2) + size = 513; + else if (cams == 3 || cams == 4) + size = 257; + else { + err("\"cams\" parameter too high!"); + return -1; + } + } else if (ov->bridge == BRG_OV511PLUS) { + if (cams == 1) + size = 961; + else if (cams == 2) + size = 513; + else if (cams == 3 || cams == 4) + size = 257; + else if (cams >= 5 && cams <= 8) + size = 129; + else if (cams >= 9 && cams <= 31) + size = 33; + else { + err("\"cams\" parameter too high!"); + return -1; + } + } else if (ov->bclass == BCL_OV518) { + if (cams == 1) + size = 896; + else if (cams == 2) + size = 512; + else if (cams == 3 || cams == 4) + size = 256; + else if (cams >= 5 && cams <= 8) + size = 128; + else { + err("\"cams\" parameter too high!"); + return -1; + } + } else { + err("invalid bridge type"); + return -1; + } + + // FIXME: OV518 is hardcoded to 15 FPS (alternate 5) for now + if (ov->bclass == BCL_OV518) { + if (packetsize == -1) { + ov518_set_packet_size(ov, 640); + } else { + info("Forcing packet size to %d", packetsize); + ov518_set_packet_size(ov, packetsize); + } + } else { + if (packetsize == -1) { + ov511_set_packet_size(ov, size); + } else { + info("Forcing packet size to %d", packetsize); + ov511_set_packet_size(ov, packetsize); + } + } + + for (n = 0; n < OV511_NUMSBUF; n++) { + urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); + if (!urb) { + err("init isoc: usb_alloc_urb ret. NULL"); + return -ENOMEM; + } + ov->sbuf[n].urb = urb; + urb->dev = ov->dev; + urb->context = &ov->sbuf[n]; + urb->pipe = usb_rcvisocpipe(ov->dev, OV511_ENDPOINT_ADDRESS); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = ov->sbuf[n].data; + urb->complete = ov51x_isoc_irq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = ov->packet_size * FRAMES_PER_DESC; + urb->interval = 1; + for (fx = 0; fx < FRAMES_PER_DESC; fx++) { + urb->iso_frame_desc[fx].offset = ov->packet_size * fx; + urb->iso_frame_desc[fx].length = ov->packet_size; + } + } + + ov->streaming = 1; + + for (n = 0; n < OV511_NUMSBUF; n++) { + ov->sbuf[n].urb->dev = ov->dev; + err = usb_submit_urb(ov->sbuf[n].urb, GFP_KERNEL); + if (err) { + err("init isoc: usb_submit_urb(%d) ret %d", n, err); + return err; + } + } + + return 0; +} + +static void +ov51x_unlink_isoc(struct usb_ov511 *ov) +{ + int n; + + /* Unschedule all of the iso td's */ + for (n = OV511_NUMSBUF - 1; n >= 0; n--) { + if (ov->sbuf[n].urb) { + usb_kill_urb(ov->sbuf[n].urb); + usb_free_urb(ov->sbuf[n].urb); + ov->sbuf[n].urb = NULL; + } + } +} + +static void +ov51x_stop_isoc(struct usb_ov511 *ov) +{ + if (!ov->streaming || !ov->dev) + return; + + PDEBUG(3, "*** Stopping capture ***"); + + if (ov->bclass == BCL_OV518) + ov518_set_packet_size(ov, 0); + else + ov511_set_packet_size(ov, 0); + + ov->streaming = 0; + + ov51x_unlink_isoc(ov); +} + +static int +ov51x_new_frame(struct usb_ov511 *ov, int framenum) +{ + struct ov511_frame *frame; + int newnum; + + PDEBUG(4, "ov->curframe = %d, framenum = %d", ov->curframe, framenum); + + if (!ov->dev) + return -1; + + /* If we're not grabbing a frame right now and the other frame is */ + /* ready to be grabbed into, then use it instead */ + if (ov->curframe == -1) { + newnum = (framenum - 1 + OV511_NUMFRAMES) % OV511_NUMFRAMES; + if (ov->frame[newnum].grabstate == FRAME_READY) + framenum = newnum; + } else + return 0; + + frame = &ov->frame[framenum]; + + PDEBUG(4, "framenum = %d, width = %d, height = %d", framenum, + frame->width, frame->height); + + frame->grabstate = FRAME_GRABBING; + frame->scanstate = STATE_SCANNING; + frame->snapshot = 0; + + ov->curframe = framenum; + + /* Make sure it's not too big */ + if (frame->width > ov->maxwidth) + frame->width = ov->maxwidth; + + frame->width &= ~7L; /* Multiple of 8 */ + + if (frame->height > ov->maxheight) + frame->height = ov->maxheight; + + frame->height &= ~3L; /* Multiple of 4 */ + + return 0; +} + +/**************************************************************************** + * + * Buffer management + * + ***************************************************************************/ + +/* + * - You must acquire buf_lock before entering this function. + * - Because this code will free any non-null pointer, you must be sure to null + * them if you explicitly free them somewhere else! + */ +static void +ov51x_do_dealloc(struct usb_ov511 *ov) +{ + int i; + PDEBUG(4, "entered"); + + if (ov->fbuf) { + rvfree(ov->fbuf, OV511_NUMFRAMES + * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight)); + ov->fbuf = NULL; + } + + vfree(ov->rawfbuf); + ov->rawfbuf = NULL; + + vfree(ov->tempfbuf); + ov->tempfbuf = NULL; + + for (i = 0; i < OV511_NUMSBUF; i++) { + kfree(ov->sbuf[i].data); + ov->sbuf[i].data = NULL; + } + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].data = NULL; + ov->frame[i].rawdata = NULL; + ov->frame[i].tempdata = NULL; + if (ov->frame[i].compbuf) { + free_page((unsigned long) ov->frame[i].compbuf); + ov->frame[i].compbuf = NULL; + } + } + + PDEBUG(4, "buffer memory deallocated"); + ov->buf_state = BUF_NOT_ALLOCATED; + PDEBUG(4, "leaving"); +} + +static int +ov51x_alloc(struct usb_ov511 *ov) +{ + int i; + const int w = ov->maxwidth; + const int h = ov->maxheight; + const int data_bufsize = OV511_NUMFRAMES * MAX_DATA_SIZE(w, h); + const int raw_bufsize = OV511_NUMFRAMES * MAX_RAW_DATA_SIZE(w, h); + + PDEBUG(4, "entered"); + mutex_lock(&ov->buf_lock); + + if (ov->buf_state == BUF_ALLOCATED) + goto out; + + ov->fbuf = rvmalloc(data_bufsize); + if (!ov->fbuf) + goto error; + + ov->rawfbuf = vmalloc(raw_bufsize); + if (!ov->rawfbuf) + goto error; + + memset(ov->rawfbuf, 0, raw_bufsize); + + ov->tempfbuf = vmalloc(raw_bufsize); + if (!ov->tempfbuf) + goto error; + + memset(ov->tempfbuf, 0, raw_bufsize); + + for (i = 0; i < OV511_NUMSBUF; i++) { + ov->sbuf[i].data = kmalloc(FRAMES_PER_DESC * + MAX_FRAME_SIZE_PER_DESC, GFP_KERNEL); + if (!ov->sbuf[i].data) + goto error; + + PDEBUG(4, "sbuf[%d] @ %p", i, ov->sbuf[i].data); + } + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].data = ov->fbuf + i * MAX_DATA_SIZE(w, h); + ov->frame[i].rawdata = ov->rawfbuf + + i * MAX_RAW_DATA_SIZE(w, h); + ov->frame[i].tempdata = ov->tempfbuf + + i * MAX_RAW_DATA_SIZE(w, h); + + ov->frame[i].compbuf = + (unsigned char *) __get_free_page(GFP_KERNEL); + if (!ov->frame[i].compbuf) + goto error; + + PDEBUG(4, "frame[%d] @ %p", i, ov->frame[i].data); + } + + ov->buf_state = BUF_ALLOCATED; +out: + mutex_unlock(&ov->buf_lock); + PDEBUG(4, "leaving"); + return 0; +error: + ov51x_do_dealloc(ov); + mutex_unlock(&ov->buf_lock); + PDEBUG(4, "errored"); + return -ENOMEM; +} + +static void +ov51x_dealloc(struct usb_ov511 *ov) +{ + PDEBUG(4, "entered"); + mutex_lock(&ov->buf_lock); + ov51x_do_dealloc(ov); + mutex_unlock(&ov->buf_lock); + PDEBUG(4, "leaving"); +} + +/**************************************************************************** + * + * V4L 1 API + * + ***************************************************************************/ + +static int +ov51x_v4l1_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct usb_ov511 *ov = video_get_drvdata(vdev); + int err, i; + + PDEBUG(4, "opening"); + + mutex_lock(&ov->lock); + + err = -EBUSY; + if (ov->user) + goto out; + + ov->sub_flag = 0; + + /* In case app doesn't set them... */ + err = ov51x_set_default_params(ov); + if (err < 0) + goto out; + + /* Make sure frames are reset */ + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].grabstate = FRAME_UNUSED; + ov->frame[i].bytes_read = 0; + } + + /* If compression is on, make sure now that a + * decompressor can be loaded */ + if (ov->compress && !ov->decomp_ops) { + err = request_decompressor(ov); + if (err && !dumppix) + goto out; + } + + err = ov51x_alloc(ov); + if (err < 0) + goto out; + + err = ov51x_init_isoc(ov); + if (err) { + ov51x_dealloc(ov); + goto out; + } + + ov->user++; + file->private_data = vdev; + + if (ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 1); + +out: + mutex_unlock(&ov->lock); + return err; +} + +static int +ov51x_v4l1_close(struct inode *inode, struct file *file) +{ + struct video_device *vdev = file->private_data; + struct usb_ov511 *ov = video_get_drvdata(vdev); + + PDEBUG(4, "ov511_close"); + + mutex_lock(&ov->lock); + + ov->user--; + ov51x_stop_isoc(ov); + + if (ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 0); + + if (ov->dev) + ov51x_dealloc(ov); + + mutex_unlock(&ov->lock); + + /* Device unplugged while open. Only a minimum of unregistration is done + * here; the disconnect callback already did the rest. */ + if (!ov->dev) { + mutex_lock(&ov->cbuf_lock); + kfree(ov->cbuf); + ov->cbuf = NULL; + mutex_unlock(&ov->cbuf_lock); + + ov51x_dealloc(ov); + kfree(ov); + ov = NULL; + } + + file->private_data = NULL; + return 0; +} + +/* Do not call this function directly! */ +static int +ov51x_v4l1_ioctl_internal(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct usb_ov511 *ov = video_get_drvdata(vdev); + PDEBUG(5, "IOCtl: 0x%X", cmd); + + if (!ov->dev) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP: + { + struct video_capability *b = arg; + + PDEBUG(4, "VIDIOCGCAP"); + + memset(b, 0, sizeof(struct video_capability)); + sprintf(b->name, "%s USB Camera", + symbolic(brglist, ov->bridge)); + b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE; + b->channels = ov->num_inputs; + b->audios = 0; + b->maxwidth = ov->maxwidth; + b->maxheight = ov->maxheight; + b->minwidth = ov->minwidth; + b->minheight = ov->minheight; + + return 0; + } + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + + PDEBUG(4, "VIDIOCGCHAN"); + + if ((unsigned)(v->channel) >= ov->num_inputs) { + err("Invalid channel (%d)", v->channel); + return -EINVAL; + } + + v->norm = ov->norm; + v->type = VIDEO_TYPE_CAMERA; + v->flags = 0; +// v->flags |= (ov->has_decoder) ? VIDEO_VC_NORM : 0; + v->tuners = 0; + decoder_get_input_name(ov, v->channel, v->name); + + return 0; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; + int err; + + PDEBUG(4, "VIDIOCSCHAN"); + + /* Make sure it's not a camera */ + if (!ov->has_decoder) { + if (v->channel == 0) + return 0; + else + return -EINVAL; + } + + if (v->norm != VIDEO_MODE_PAL && + v->norm != VIDEO_MODE_NTSC && + v->norm != VIDEO_MODE_SECAM && + v->norm != VIDEO_MODE_AUTO) { + err("Invalid norm (%d)", v->norm); + return -EINVAL; + } + + if ((unsigned)(v->channel) >= ov->num_inputs) { + err("Invalid channel (%d)", v->channel); + return -EINVAL; + } + + err = decoder_set_input(ov, v->channel); + if (err) + return err; + + err = decoder_set_norm(ov, v->norm); + if (err) + return err; + + return 0; + } + case VIDIOCGPICT: + { + struct video_picture *p = arg; + + PDEBUG(4, "VIDIOCGPICT"); + + memset(p, 0, sizeof(struct video_picture)); + if (sensor_get_picture(ov, p)) + return -EIO; + + /* Can we get these from frame[0]? -claudio? */ + p->depth = ov->frame[0].depth; + p->palette = ov->frame[0].format; + + return 0; + } + case VIDIOCSPICT: + { + struct video_picture *p = arg; + int i, rc; + + PDEBUG(4, "VIDIOCSPICT"); + + if (!get_depth(p->palette)) + return -EINVAL; + + if (sensor_set_picture(ov, p)) + return -EIO; + + if (force_palette && p->palette != force_palette) { + info("Palette rejected (%s)", + symbolic(v4l1_plist, p->palette)); + return -EINVAL; + } + + // FIXME: Format should be independent of frames + if (p->palette != ov->frame[0].format) { + PDEBUG(4, "Detected format change"); + + rc = ov51x_wait_frames_inactive(ov); + if (rc) + return rc; + + mode_init_regs(ov, ov->frame[0].width, + ov->frame[0].height, p->palette, ov->sub_flag); + } + + PDEBUG(4, "Setting depth=%d, palette=%s", + p->depth, symbolic(v4l1_plist, p->palette)); + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].depth = p->depth; + ov->frame[i].format = p->palette; + } + + return 0; + } + case VIDIOCGCAPTURE: + { + int *vf = arg; + + PDEBUG(4, "VIDIOCGCAPTURE"); + + ov->sub_flag = *vf; + return 0; + } + case VIDIOCSCAPTURE: + { + struct video_capture *vc = arg; + + PDEBUG(4, "VIDIOCSCAPTURE"); + + if (vc->flags) + return -EINVAL; + if (vc->decimation) + return -EINVAL; + + vc->x &= ~3L; + vc->y &= ~1L; + vc->y &= ~31L; + + if (vc->width == 0) + vc->width = 32; + + vc->height /= 16; + vc->height *= 16; + if (vc->height == 0) + vc->height = 16; + + ov->subx = vc->x; + ov->suby = vc->y; + ov->subw = vc->width; + ov->subh = vc->height; + + return 0; + } + case VIDIOCSWIN: + { + struct video_window *vw = arg; + int i, rc; + + PDEBUG(4, "VIDIOCSWIN: %dx%d", vw->width, vw->height); + +#if 0 + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (vw->height != ov->maxheight) + return -EINVAL; + if (vw->width != ov->maxwidth) + return -EINVAL; +#endif + + rc = ov51x_wait_frames_inactive(ov); + if (rc) + return rc; + + rc = mode_init_regs(ov, vw->width, vw->height, + ov->frame[0].format, ov->sub_flag); + if (rc < 0) + return rc; + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].width = vw->width; + ov->frame[i].height = vw->height; + } + + return 0; + } + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + memset(vw, 0, sizeof(struct video_window)); + vw->x = 0; /* FIXME */ + vw->y = 0; + vw->width = ov->frame[0].width; + vw->height = ov->frame[0].height; + vw->flags = 30; + + PDEBUG(4, "VIDIOCGWIN: %dx%d", vw->width, vw->height); + + return 0; + } + case VIDIOCGMBUF: + { + struct video_mbuf *vm = arg; + int i; + + PDEBUG(4, "VIDIOCGMBUF"); + + memset(vm, 0, sizeof(struct video_mbuf)); + vm->size = OV511_NUMFRAMES + * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight); + vm->frames = OV511_NUMFRAMES; + + vm->offsets[0] = 0; + for (i = 1; i < OV511_NUMFRAMES; i++) { + vm->offsets[i] = vm->offsets[i-1] + + MAX_DATA_SIZE(ov->maxwidth, ov->maxheight); + } + + return 0; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *vm = arg; + int rc, depth; + unsigned int f = vm->frame; + + PDEBUG(4, "VIDIOCMCAPTURE: frame: %d, %dx%d, %s", f, vm->width, + vm->height, symbolic(v4l1_plist, vm->format)); + + depth = get_depth(vm->format); + if (!depth) { + PDEBUG(2, "VIDIOCMCAPTURE: invalid format (%s)", + symbolic(v4l1_plist, vm->format)); + return -EINVAL; + } + + if (f >= OV511_NUMFRAMES) { + err("VIDIOCMCAPTURE: invalid frame (%d)", f); + return -EINVAL; + } + + if (vm->width > ov->maxwidth + || vm->height > ov->maxheight) { + err("VIDIOCMCAPTURE: requested dimensions too big"); + return -EINVAL; + } + + if (ov->frame[f].grabstate == FRAME_GRABBING) { + PDEBUG(4, "VIDIOCMCAPTURE: already grabbing"); + return -EBUSY; + } + + if (force_palette && (vm->format != force_palette)) { + PDEBUG(2, "palette rejected (%s)", + symbolic(v4l1_plist, vm->format)); + return -EINVAL; + } + + if ((ov->frame[f].width != vm->width) || + (ov->frame[f].height != vm->height) || + (ov->frame[f].format != vm->format) || + (ov->frame[f].sub_flag != ov->sub_flag) || + (ov->frame[f].depth != depth)) { + PDEBUG(4, "VIDIOCMCAPTURE: change in image parameters"); + + rc = ov51x_wait_frames_inactive(ov); + if (rc) + return rc; + + rc = mode_init_regs(ov, vm->width, vm->height, + vm->format, ov->sub_flag); +#if 0 + if (rc < 0) { + PDEBUG(1, "Got error while initializing regs "); + return ret; + } +#endif + ov->frame[f].width = vm->width; + ov->frame[f].height = vm->height; + ov->frame[f].format = vm->format; + ov->frame[f].sub_flag = ov->sub_flag; + ov->frame[f].depth = depth; + } + + /* Mark it as ready */ + ov->frame[f].grabstate = FRAME_READY; + + PDEBUG(4, "VIDIOCMCAPTURE: renewing frame %d", f); + + return ov51x_new_frame(ov, f); + } + case VIDIOCSYNC: + { + unsigned int fnum = *((unsigned int *) arg); + struct ov511_frame *frame; + int rc; + + if (fnum >= OV511_NUMFRAMES) { + err("VIDIOCSYNC: invalid frame (%d)", fnum); + return -EINVAL; + } + + frame = &ov->frame[fnum]; + + PDEBUG(4, "syncing to frame %d, grabstate = %d", fnum, + frame->grabstate); + + switch (frame->grabstate) { + case FRAME_UNUSED: + return -EINVAL; + case FRAME_READY: + case FRAME_GRABBING: + case FRAME_ERROR: +redo: + if (!ov->dev) + return -EIO; + + rc = wait_event_interruptible(frame->wq, + (frame->grabstate == FRAME_DONE) + || (frame->grabstate == FRAME_ERROR)); + + if (rc) + return rc; + + if (frame->grabstate == FRAME_ERROR) { + if ((rc = ov51x_new_frame(ov, fnum)) < 0) + return rc; + goto redo; + } + /* Fall through */ + case FRAME_DONE: + if (ov->snap_enabled && !frame->snapshot) { + if ((rc = ov51x_new_frame(ov, fnum)) < 0) + return rc; + goto redo; + } + + frame->grabstate = FRAME_UNUSED; + + /* Reset the hardware snapshot button */ + /* FIXME - Is this the best place for this? */ + if ((ov->snap_enabled) && (frame->snapshot)) { + frame->snapshot = 0; + ov51x_clear_snapshot(ov); + } + + /* Decompression, format conversion, etc... */ + ov51x_postprocess(ov, frame); + + break; + } /* end switch */ + + return 0; + } + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + PDEBUG(4, "VIDIOCGFBUF"); + + memset(vb, 0, sizeof(struct video_buffer)); + + return 0; + } + case VIDIOCGUNIT: + { + struct video_unit *vu = arg; + + PDEBUG(4, "VIDIOCGUNIT"); + + memset(vu, 0, sizeof(struct video_unit)); + + vu->video = ov->vdev->minor; + vu->vbi = VIDEO_NO_UNIT; + vu->radio = VIDEO_NO_UNIT; + vu->audio = VIDEO_NO_UNIT; + vu->teletext = VIDEO_NO_UNIT; + + return 0; + } + case OV511IOC_WI2C: + { + struct ov511_i2c_struct *w = arg; + + return i2c_w_slave(ov, w->slave, w->reg, w->value, w->mask); + } + case OV511IOC_RI2C: + { + struct ov511_i2c_struct *r = arg; + int rc; + + rc = i2c_r_slave(ov, r->slave, r->reg); + if (rc < 0) + return rc; + + r->value = rc; + return 0; + } + default: + PDEBUG(3, "Unsupported IOCtl: 0x%X", cmd); + return -ENOIOCTLCMD; + } /* end switch */ + + return 0; +} + +static int +ov51x_v4l1_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct video_device *vdev = file->private_data; + struct usb_ov511 *ov = video_get_drvdata(vdev); + int rc; + + if (mutex_lock_interruptible(&ov->lock)) + return -EINTR; + + rc = video_usercopy(inode, file, cmd, arg, ov51x_v4l1_ioctl_internal); + + mutex_unlock(&ov->lock); + return rc; +} + +static ssize_t +ov51x_v4l1_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos) +{ + struct video_device *vdev = file->private_data; + int noblock = file->f_flags&O_NONBLOCK; + unsigned long count = cnt; + struct usb_ov511 *ov = video_get_drvdata(vdev); + int i, rc = 0, frmx = -1; + struct ov511_frame *frame; + + if (mutex_lock_interruptible(&ov->lock)) + return -EINTR; + + PDEBUG(4, "%ld bytes, noblock=%d", count, noblock); + + if (!vdev || !buf) { + rc = -EFAULT; + goto error; + } + + if (!ov->dev) { + rc = -EIO; + goto error; + } + +// FIXME: Only supports two frames + /* See if a frame is completed, then use it. */ + if (ov->frame[0].grabstate >= FRAME_DONE) /* _DONE or _ERROR */ + frmx = 0; + else if (ov->frame[1].grabstate >= FRAME_DONE)/* _DONE or _ERROR */ + frmx = 1; + + /* If nonblocking we return immediately */ + if (noblock && (frmx == -1)) { + rc = -EAGAIN; + goto error; + } + + /* If no FRAME_DONE, look for a FRAME_GRABBING state. */ + /* See if a frame is in process (grabbing), then use it. */ + if (frmx == -1) { + if (ov->frame[0].grabstate == FRAME_GRABBING) + frmx = 0; + else if (ov->frame[1].grabstate == FRAME_GRABBING) + frmx = 1; + } + + /* If no frame is active, start one. */ + if (frmx == -1) { + if ((rc = ov51x_new_frame(ov, frmx = 0))) { + err("read: ov51x_new_frame error"); + goto error; + } + } + + frame = &ov->frame[frmx]; + +restart: + if (!ov->dev) { + rc = -EIO; + goto error; + } + + /* Wait while we're grabbing the image */ + PDEBUG(4, "Waiting image grabbing"); + rc = wait_event_interruptible(frame->wq, + (frame->grabstate == FRAME_DONE) + || (frame->grabstate == FRAME_ERROR)); + + if (rc) + goto error; + + PDEBUG(4, "Got image, frame->grabstate = %d", frame->grabstate); + PDEBUG(4, "bytes_recvd = %d", frame->bytes_recvd); + + if (frame->grabstate == FRAME_ERROR) { + frame->bytes_read = 0; + err("** ick! ** Errored frame %d", ov->curframe); + if (ov51x_new_frame(ov, frmx)) { + err("read: ov51x_new_frame error"); + goto error; + } + goto restart; + } + + + /* Repeat until we get a snapshot frame */ + if (ov->snap_enabled) + PDEBUG(4, "Waiting snapshot frame"); + if (ov->snap_enabled && !frame->snapshot) { + frame->bytes_read = 0; + if ((rc = ov51x_new_frame(ov, frmx))) { + err("read: ov51x_new_frame error"); + goto error; + } + goto restart; + } + + /* Clear the snapshot */ + if (ov->snap_enabled && frame->snapshot) { + frame->snapshot = 0; + ov51x_clear_snapshot(ov); + } + + /* Decompression, format conversion, etc... */ + ov51x_postprocess(ov, frame); + + PDEBUG(4, "frmx=%d, bytes_read=%ld, length=%ld", frmx, + frame->bytes_read, + get_frame_length(frame)); + + /* copy bytes to user space; we allow for partials reads */ +// if ((count + frame->bytes_read) +// > get_frame_length((struct ov511_frame *)frame)) +// count = frame->scanlength - frame->bytes_read; + + /* FIXME - count hardwired to be one frame... */ + count = get_frame_length(frame); + + PDEBUG(4, "Copy to user space: %ld bytes", count); + if ((i = copy_to_user(buf, frame->data + frame->bytes_read, count))) { + PDEBUG(4, "Copy failed! %d bytes not copied", i); + rc = -EFAULT; + goto error; + } + + frame->bytes_read += count; + PDEBUG(4, "{copy} count used=%ld, new bytes_read=%ld", + count, frame->bytes_read); + + /* If all data have been read... */ + if (frame->bytes_read + >= get_frame_length(frame)) { + frame->bytes_read = 0; + +// FIXME: Only supports two frames + /* Mark it as available to be used again. */ + ov->frame[frmx].grabstate = FRAME_UNUSED; + if ((rc = ov51x_new_frame(ov, !frmx))) { + err("ov51x_new_frame returned error"); + goto error; + } + } + + PDEBUG(4, "read finished, returning %ld (sweet)", count); + + mutex_unlock(&ov->lock); + return count; + +error: + mutex_unlock(&ov->lock); + return rc; +} + +static int +ov51x_v4l1_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = file->private_data; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end - vma->vm_start; + struct usb_ov511 *ov = video_get_drvdata(vdev); + unsigned long page, pos; + + if (ov->dev == NULL) + return -EIO; + + PDEBUG(4, "mmap: %ld (%lX) bytes", size, size); + + if (size > (((OV511_NUMFRAMES + * MAX_DATA_SIZE(ov->maxwidth, ov->maxheight) + + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))) + return -EINVAL; + + if (mutex_lock_interruptible(&ov->lock)) + return -EINTR; + + pos = (unsigned long)ov->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&ov->lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + mutex_unlock(&ov->lock); + return 0; +} + +static struct file_operations ov511_fops = { + .owner = THIS_MODULE, + .open = ov51x_v4l1_open, + .release = ov51x_v4l1_close, + .read = ov51x_v4l1_read, + .mmap = ov51x_v4l1_mmap, + .ioctl = ov51x_v4l1_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +static struct video_device vdev_template = { + .owner = THIS_MODULE, + .name = "OV511 USB Camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_OV511, + .fops = &ov511_fops, + .release = video_device_release, + .minor = -1, +}; + +/**************************************************************************** + * + * OV511 and sensor configuration + * + ***************************************************************************/ + +/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses + * the same register settings as the OV7610, since they are very similar. + */ +static int +ov7xx0_configure(struct usb_ov511 *ov) +{ + int i, success; + int rc; + + /* Lawrence Glaister <lg@jfm.bc.ca> reports: + * + * Register 0x0f in the 7610 has the following effects: + * + * 0x85 (AEC method 1): Best overall, good contrast range + * 0x45 (AEC method 2): Very overexposed + * 0xa5 (spec sheet default): Ok, but the black level is + * shifted resulting in loss of contrast + * 0x05 (old driver setting): very overexposed, too much + * contrast + */ + static struct ov511_regvals aRegvalsNorm7610[] = { + { OV511_I2C_BUS, 0x10, 0xff }, + { OV511_I2C_BUS, 0x16, 0x06 }, + { OV511_I2C_BUS, 0x28, 0x24 }, + { OV511_I2C_BUS, 0x2b, 0xac }, + { OV511_I2C_BUS, 0x12, 0x00 }, + { OV511_I2C_BUS, 0x38, 0x81 }, + { OV511_I2C_BUS, 0x28, 0x24 }, /* 0c */ + { OV511_I2C_BUS, 0x0f, 0x85 }, /* lg's setting */ + { OV511_I2C_BUS, 0x15, 0x01 }, + { OV511_I2C_BUS, 0x20, 0x1c }, + { OV511_I2C_BUS, 0x23, 0x2a }, + { OV511_I2C_BUS, 0x24, 0x10 }, + { OV511_I2C_BUS, 0x25, 0x8a }, + { OV511_I2C_BUS, 0x26, 0xa2 }, + { OV511_I2C_BUS, 0x27, 0xc2 }, + { OV511_I2C_BUS, 0x2a, 0x04 }, + { OV511_I2C_BUS, 0x2c, 0xfe }, + { OV511_I2C_BUS, 0x2d, 0x93 }, + { OV511_I2C_BUS, 0x30, 0x71 }, + { OV511_I2C_BUS, 0x31, 0x60 }, + { OV511_I2C_BUS, 0x32, 0x26 }, + { OV511_I2C_BUS, 0x33, 0x20 }, + { OV511_I2C_BUS, 0x34, 0x48 }, + { OV511_I2C_BUS, 0x12, 0x24 }, + { OV511_I2C_BUS, 0x11, 0x01 }, + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0d, 0x24 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + static struct ov511_regvals aRegvalsNorm7620[] = { + { OV511_I2C_BUS, 0x00, 0x00 }, + { OV511_I2C_BUS, 0x01, 0x80 }, + { OV511_I2C_BUS, 0x02, 0x80 }, + { OV511_I2C_BUS, 0x03, 0xc0 }, + { OV511_I2C_BUS, 0x06, 0x60 }, + { OV511_I2C_BUS, 0x07, 0x00 }, + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0d, 0x24 }, + { OV511_I2C_BUS, 0x11, 0x01 }, + { OV511_I2C_BUS, 0x12, 0x24 }, + { OV511_I2C_BUS, 0x13, 0x01 }, + { OV511_I2C_BUS, 0x14, 0x84 }, + { OV511_I2C_BUS, 0x15, 0x01 }, + { OV511_I2C_BUS, 0x16, 0x03 }, + { OV511_I2C_BUS, 0x17, 0x2f }, + { OV511_I2C_BUS, 0x18, 0xcf }, + { OV511_I2C_BUS, 0x19, 0x06 }, + { OV511_I2C_BUS, 0x1a, 0xf5 }, + { OV511_I2C_BUS, 0x1b, 0x00 }, + { OV511_I2C_BUS, 0x20, 0x18 }, + { OV511_I2C_BUS, 0x21, 0x80 }, + { OV511_I2C_BUS, 0x22, 0x80 }, + { OV511_I2C_BUS, 0x23, 0x00 }, + { OV511_I2C_BUS, 0x26, 0xa2 }, + { OV511_I2C_BUS, 0x27, 0xea }, + { OV511_I2C_BUS, 0x28, 0x20 }, + { OV511_I2C_BUS, 0x29, 0x00 }, + { OV511_I2C_BUS, 0x2a, 0x10 }, + { OV511_I2C_BUS, 0x2b, 0x00 }, + { OV511_I2C_BUS, 0x2c, 0x88 }, + { OV511_I2C_BUS, 0x2d, 0x91 }, + { OV511_I2C_BUS, 0x2e, 0x80 }, + { OV511_I2C_BUS, 0x2f, 0x44 }, + { OV511_I2C_BUS, 0x60, 0x27 }, + { OV511_I2C_BUS, 0x61, 0x02 }, + { OV511_I2C_BUS, 0x62, 0x5f }, + { OV511_I2C_BUS, 0x63, 0xd5 }, + { OV511_I2C_BUS, 0x64, 0x57 }, + { OV511_I2C_BUS, 0x65, 0x83 }, + { OV511_I2C_BUS, 0x66, 0x55 }, + { OV511_I2C_BUS, 0x67, 0x92 }, + { OV511_I2C_BUS, 0x68, 0xcf }, + { OV511_I2C_BUS, 0x69, 0x76 }, + { OV511_I2C_BUS, 0x6a, 0x22 }, + { OV511_I2C_BUS, 0x6b, 0x00 }, + { OV511_I2C_BUS, 0x6c, 0x02 }, + { OV511_I2C_BUS, 0x6d, 0x44 }, + { OV511_I2C_BUS, 0x6e, 0x80 }, + { OV511_I2C_BUS, 0x6f, 0x1d }, + { OV511_I2C_BUS, 0x70, 0x8b }, + { OV511_I2C_BUS, 0x71, 0x00 }, + { OV511_I2C_BUS, 0x72, 0x14 }, + { OV511_I2C_BUS, 0x73, 0x54 }, + { OV511_I2C_BUS, 0x74, 0x00 }, + { OV511_I2C_BUS, 0x75, 0x8e }, + { OV511_I2C_BUS, 0x76, 0x00 }, + { OV511_I2C_BUS, 0x77, 0xff }, + { OV511_I2C_BUS, 0x78, 0x80 }, + { OV511_I2C_BUS, 0x79, 0x80 }, + { OV511_I2C_BUS, 0x7a, 0x80 }, + { OV511_I2C_BUS, 0x7b, 0xe2 }, + { OV511_I2C_BUS, 0x7c, 0x00 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + PDEBUG(4, "starting configuration"); + + /* This looks redundant, but is necessary for WebCam 3 */ + ov->primary_i2c_slave = OV7xx0_SID; + if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) + return -1; + + if (init_ov_sensor(ov) >= 0) { + PDEBUG(1, "OV7xx0 sensor initalized (method 1)"); + } else { + /* Reset the 76xx */ + if (i2c_w(ov, 0x12, 0x80) < 0) + return -1; + + /* Wait for it to initialize */ + msleep(150); + + i = 0; + success = 0; + while (i <= i2c_detect_tries) { + if ((i2c_r(ov, OV7610_REG_ID_HIGH) == 0x7F) && + (i2c_r(ov, OV7610_REG_ID_LOW) == 0xA2)) { + success = 1; + break; + } else { + i++; + } + } + +// Was (i == i2c_detect_tries) previously. This obviously used to always report +// success. Whether anyone actually depended on that bug is unknown + if ((i >= i2c_detect_tries) && (success == 0)) { + err("Failed to read sensor ID. You might not have an"); + err("OV7610/20, or it may be not responding. Report"); + err("this to " EMAIL); + err("This is only a warning. You can attempt to use"); + err("your camera anyway"); +// Only issue a warning for now +// return -1; + } else { + PDEBUG(1, "OV7xx0 initialized (method 2, %dx)", i+1); + } + } + + /* Detect sensor (sub)type */ + rc = i2c_r(ov, OV7610_REG_COM_I); + + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } else if ((rc & 3) == 3) { + info("Sensor is an OV7610"); + ov->sensor = SEN_OV7610; + } else if ((rc & 3) == 1) { + /* I don't know what's different about the 76BE yet. */ + if (i2c_r(ov, 0x15) & 1) + info("Sensor is an OV7620AE"); + else + info("Sensor is an OV76BE"); + + /* OV511+ will return all zero isoc data unless we + * configure the sensor as a 7620. Someone needs to + * find the exact reg. setting that causes this. */ + if (ov->bridge == BRG_OV511PLUS) { + info("Enabling 511+/7620AE workaround"); + ov->sensor = SEN_OV7620; + } else { + ov->sensor = SEN_OV76BE; + } + } else if ((rc & 3) == 0) { + info("Sensor is an OV7620"); + ov->sensor = SEN_OV7620; + } else { + err("Unknown image sensor version: %d", rc & 3); + return -1; + } + + if (ov->sensor == SEN_OV7620) { + PDEBUG(4, "Writing 7620 registers"); + if (write_regvals(ov, aRegvalsNorm7620)) + return -1; + } else { + PDEBUG(4, "Writing 7610 registers"); + if (write_regvals(ov, aRegvalsNorm7610)) + return -1; + } + + /* Set sensor-specific vars */ + ov->maxwidth = 640; + ov->maxheight = 480; + ov->minwidth = 64; + ov->minheight = 48; + + // FIXME: These do not match the actual settings yet + ov->brightness = 0x80 << 8; + ov->contrast = 0x80 << 8; + ov->colour = 0x80 << 8; + ov->hue = 0x80 << 8; + + return 0; +} + +/* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */ +static int +ov6xx0_configure(struct usb_ov511 *ov) +{ + int rc; + + static struct ov511_regvals aRegvalsNorm6x20[] = { + { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */ + { OV511_I2C_BUS, 0x11, 0x01 }, + { OV511_I2C_BUS, 0x03, 0x60 }, + { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */ + { OV511_I2C_BUS, 0x07, 0xa8 }, + /* The ratio of 0x0c and 0x0d controls the white point */ + { OV511_I2C_BUS, 0x0c, 0x24 }, + { OV511_I2C_BUS, 0x0d, 0x24 }, + { OV511_I2C_BUS, 0x0f, 0x15 }, /* COMS */ + { OV511_I2C_BUS, 0x10, 0x75 }, /* AEC Exposure time */ + { OV511_I2C_BUS, 0x12, 0x24 }, /* Enable AGC */ + { OV511_I2C_BUS, 0x14, 0x04 }, + /* 0x16: 0x06 helps frame stability with moving objects */ + { OV511_I2C_BUS, 0x16, 0x06 }, +// { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */ + { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */ + /* 0x28: 0x05 Selects RGB format if RGB on */ + { OV511_I2C_BUS, 0x28, 0x05 }, + { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ +// { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ + { OV511_I2C_BUS, 0x2d, 0x99 }, + { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */ + { OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */ + { OV511_I2C_BUS, 0x38, 0x8b }, + { OV511_I2C_BUS, 0x39, 0x40 }, + + { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */ + { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */ + { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */ + + { OV511_I2C_BUS, 0x3d, 0x80 }, + /* These next two registers (0x4a, 0x4b) are undocumented. They + * control the color balance */ + { OV511_I2C_BUS, 0x4a, 0x80 }, + { OV511_I2C_BUS, 0x4b, 0x80 }, + { OV511_I2C_BUS, 0x4d, 0xd2 }, /* This reduces noise a bit */ + { OV511_I2C_BUS, 0x4e, 0xc1 }, + { OV511_I2C_BUS, 0x4f, 0x04 }, +// Do 50-53 have any effect? +// Toggle 0x12[2] off and on here? + { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */ + }; + + static struct ov511_regvals aRegvalsNorm6x30[] = { + /*OK*/ { OV511_I2C_BUS, 0x12, 0x80 }, /* reset */ + { OV511_I2C_BUS, 0x11, 0x00 }, + /*OK*/ { OV511_I2C_BUS, 0x03, 0x60 }, + /*0A?*/ { OV511_I2C_BUS, 0x05, 0x7f }, /* For when autoadjust is off */ + { OV511_I2C_BUS, 0x07, 0xa8 }, + /* The ratio of 0x0c and 0x0d controls the white point */ + /*OK*/ { OV511_I2C_BUS, 0x0c, 0x24 }, + /*OK*/ { OV511_I2C_BUS, 0x0d, 0x24 }, + /*A*/ { OV511_I2C_BUS, 0x0e, 0x20 }, +// /*04?*/ { OV511_I2C_BUS, 0x14, 0x80 }, + { OV511_I2C_BUS, 0x16, 0x03 }, +// /*OK*/ { OV511_I2C_BUS, 0x20, 0x30 }, /* Aperture correction enable */ + // 21 & 22? The suggested values look wrong. Go with default + /*A*/ { OV511_I2C_BUS, 0x23, 0xc0 }, + /*A*/ { OV511_I2C_BUS, 0x25, 0x9a }, // Check this against default +// /*OK*/ { OV511_I2C_BUS, 0x26, 0xb2 }, /* BLC enable */ + + /* 0x28: 0x05 Selects RGB format if RGB on */ +// /*04?*/ { OV511_I2C_BUS, 0x28, 0x05 }, +// /*04?*/ { OV511_I2C_BUS, 0x28, 0x45 }, // DEBUG: Tristate UV bus + + /*OK*/ { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ +// /*OK*/ { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ + { OV511_I2C_BUS, 0x2d, 0x99 }, +// /*A*/ { OV511_I2C_BUS, 0x33, 0x26 }, // Reserved bits on 6620 +// /*d2?*/ { OV511_I2C_BUS, 0x34, 0x03 }, /* Max A/D range */ +// /*8b?*/ { OV511_I2C_BUS, 0x38, 0x83 }, +// /*40?*/ { OV511_I2C_BUS, 0x39, 0xc0 }, // 6630 adds bit 7 +// { OV511_I2C_BUS, 0x3c, 0x39 }, /* Enable AEC mode changing */ +// { OV511_I2C_BUS, 0x3c, 0x3c }, /* Change AEC mode */ +// { OV511_I2C_BUS, 0x3c, 0x24 }, /* Disable AEC mode changing */ + { OV511_I2C_BUS, 0x3d, 0x80 }, +// /*A*/ { OV511_I2C_BUS, 0x3f, 0x0e }, + + /* These next two registers (0x4a, 0x4b) are undocumented. They + * control the color balance */ +// /*OK?*/ { OV511_I2C_BUS, 0x4a, 0x80 }, // Check these +// /*OK?*/ { OV511_I2C_BUS, 0x4b, 0x80 }, + { OV511_I2C_BUS, 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */ + /*c1?*/ { OV511_I2C_BUS, 0x4e, 0x40 }, + + /* UV average mode, color killer: strongest */ + { OV511_I2C_BUS, 0x4f, 0x07 }, + + { OV511_I2C_BUS, 0x54, 0x23 }, /* Max AGC gain: 18dB */ + { OV511_I2C_BUS, 0x57, 0x81 }, /* (default) */ + { OV511_I2C_BUS, 0x59, 0x01 }, /* AGC dark current comp: +1 */ + { OV511_I2C_BUS, 0x5a, 0x2c }, /* (undocumented) */ + { OV511_I2C_BUS, 0x5b, 0x0f }, /* AWB chrominance levels */ +// { OV511_I2C_BUS, 0x5c, 0x10 }, + { OV511_DONE_BUS, 0x0, 0x00 }, /* END MARKER */ + }; + + PDEBUG(4, "starting sensor configuration"); + + if (init_ov_sensor(ov) < 0) { + err("Failed to read sensor ID. You might not have an OV6xx0,"); + err("or it may be not responding. Report this to " EMAIL); + return -1; + } else { + PDEBUG(1, "OV6xx0 sensor detected"); + } + + /* Detect sensor (sub)type */ + rc = i2c_r(ov, OV7610_REG_COM_I); + + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } + + if ((rc & 3) == 0) { + ov->sensor = SEN_OV6630; + info("Sensor is an OV6630"); + } else if ((rc & 3) == 1) { + ov->sensor = SEN_OV6620; + info("Sensor is an OV6620"); + } else if ((rc & 3) == 2) { + ov->sensor = SEN_OV6630; + info("Sensor is an OV6630AE"); + } else if ((rc & 3) == 3) { + ov->sensor = SEN_OV6630; + info("Sensor is an OV6630AF"); + } + + /* Set sensor-specific vars */ + ov->maxwidth = 352; + ov->maxheight = 288; + ov->minwidth = 64; + ov->minheight = 48; + + // FIXME: These do not match the actual settings yet + ov->brightness = 0x80 << 8; + ov->contrast = 0x80 << 8; + ov->colour = 0x80 << 8; + ov->hue = 0x80 << 8; + + if (ov->sensor == SEN_OV6620) { + PDEBUG(4, "Writing 6x20 registers"); + if (write_regvals(ov, aRegvalsNorm6x20)) + return -1; + } else { + PDEBUG(4, "Writing 6x30 registers"); + if (write_regvals(ov, aRegvalsNorm6x30)) + return -1; + } + + return 0; +} + +/* This initializes the KS0127 and KS0127B video decoders. */ +static int +ks0127_configure(struct usb_ov511 *ov) +{ + int rc; + +// FIXME: I don't know how to sync or reset it yet +#if 0 + if (ov51x_init_ks_sensor(ov) < 0) { + err("Failed to initialize the KS0127"); + return -1; + } else { + PDEBUG(1, "KS012x(B) sensor detected"); + } +#endif + + /* Detect decoder subtype */ + rc = i2c_r(ov, 0x00); + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } else if (rc & 0x08) { + rc = i2c_r(ov, 0x3d); + if (rc < 0) { + err("Error detecting sensor type"); + return -1; + } else if ((rc & 0x0f) == 0) { + info("Sensor is a KS0127"); + ov->sensor = SEN_KS0127; + } else if ((rc & 0x0f) == 9) { + info("Sensor is a KS0127B Rev. A"); + ov->sensor = SEN_KS0127B; + } + } else { + err("Error: Sensor is an unsupported KS0122"); + return -1; + } + + /* Set sensor-specific vars */ + ov->maxwidth = 640; + ov->maxheight = 480; + ov->minwidth = 64; + ov->minheight = 48; + + // FIXME: These do not match the actual settings yet + ov->brightness = 0x80 << 8; + ov->contrast = 0x80 << 8; + ov->colour = 0x80 << 8; + ov->hue = 0x80 << 8; + + /* This device is not supported yet. Bail out now... */ + err("This sensor is not supported yet."); + return -1; + + return 0; +} + +/* This initializes the SAA7111A video decoder. */ +static int +saa7111a_configure(struct usb_ov511 *ov) +{ + int rc; + + /* Since there is no register reset command, all registers must be + * written, otherwise gives erratic results */ + static struct ov511_regvals aRegvalsNormSAA7111A[] = { + { OV511_I2C_BUS, 0x06, 0xce }, + { OV511_I2C_BUS, 0x07, 0x00 }, + { OV511_I2C_BUS, 0x10, 0x44 }, /* YUV422, 240/286 lines */ + { OV511_I2C_BUS, 0x0e, 0x01 }, /* NTSC M or PAL BGHI */ + { OV511_I2C_BUS, 0x00, 0x00 }, + { OV511_I2C_BUS, 0x01, 0x00 }, + { OV511_I2C_BUS, 0x03, 0x23 }, + { OV511_I2C_BUS, 0x04, 0x00 }, + { OV511_I2C_BUS, 0x05, 0x00 }, + { OV511_I2C_BUS, 0x08, 0xc8 }, /* Auto field freq */ + { OV511_I2C_BUS, 0x09, 0x01 }, /* Chrom. trap off, APER=0.25 */ + { OV511_I2C_BUS, 0x0a, 0x80 }, /* BRIG=128 */ + { OV511_I2C_BUS, 0x0b, 0x40 }, /* CONT=1.0 */ + { OV511_I2C_BUS, 0x0c, 0x40 }, /* SATN=1.0 */ + { OV511_I2C_BUS, 0x0d, 0x00 }, /* HUE=0 */ + { OV511_I2C_BUS, 0x0f, 0x00 }, + { OV511_I2C_BUS, 0x11, 0x0c }, + { OV511_I2C_BUS, 0x12, 0x00 }, + { OV511_I2C_BUS, 0x13, 0x00 }, + { OV511_I2C_BUS, 0x14, 0x00 }, + { OV511_I2C_BUS, 0x15, 0x00 }, + { OV511_I2C_BUS, 0x16, 0x00 }, + { OV511_I2C_BUS, 0x17, 0x00 }, + { OV511_I2C_BUS, 0x02, 0xc0 }, /* Composite input 0 */ + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + +// FIXME: I don't know how to sync or reset it yet +#if 0 + if (ov51x_init_saa_sensor(ov) < 0) { + err("Failed to initialize the SAA7111A"); + return -1; + } else { + PDEBUG(1, "SAA7111A sensor detected"); + } +#endif + + /* 640x480 not supported with PAL */ + if (ov->pal) { + ov->maxwidth = 320; + ov->maxheight = 240; /* Even field only */ + } else { + ov->maxwidth = 640; + ov->maxheight = 480; /* Even/Odd fields */ + } + + ov->minwidth = 320; + ov->minheight = 240; /* Even field only */ + + ov->has_decoder = 1; + ov->num_inputs = 8; + ov->norm = VIDEO_MODE_AUTO; + ov->stop_during_set = 0; /* Decoder guarantees stable image */ + + /* Decoder doesn't change these values, so we use these instead of + * acutally reading the registers (which doesn't work) */ + ov->brightness = 0x80 << 8; + ov->contrast = 0x40 << 9; + ov->colour = 0x40 << 9; + ov->hue = 32768; + + PDEBUG(4, "Writing SAA7111A registers"); + if (write_regvals(ov, aRegvalsNormSAA7111A)) + return -1; + + /* Detect version of decoder. This must be done after writing the + * initial regs or the decoder will lock up. */ + rc = i2c_r(ov, 0x00); + + if (rc < 0) { + err("Error detecting sensor version"); + return -1; + } else { + info("Sensor is an SAA7111A (version 0x%x)", rc); + ov->sensor = SEN_SAA7111A; + } + + // FIXME: Fix this for OV518(+) + /* Latch to negative edge of clock. Otherwise, we get incorrect + * colors and jitter in the digital signal. */ + if (ov->bclass == BCL_OV511) + reg_w(ov, 0x11, 0x00); + else + warn("SAA7111A not yet supported with OV518/OV518+"); + + return 0; +} + +/* This initializes the OV511/OV511+ and the sensor */ +static int +ov511_configure(struct usb_ov511 *ov) +{ + static struct ov511_regvals aRegvalsInit511[] = { + { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, + { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x7f }, + { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x3f }, + { OV511_REG_BUS, R51x_SYS_INIT, 0x01 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x3d }, + { OV511_DONE_BUS, 0x0, 0x00}, + }; + + static struct ov511_regvals aRegvalsNorm511[] = { + { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0x01 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R511_FIFO_OPTS, 0x1f }, + { OV511_REG_BUS, R511_COMP_EN, 0x00 }, + { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + static struct ov511_regvals aRegvalsNorm511Plus[] = { + { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0xff }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, + { OV511_REG_BUS, R51x_SYS_SNAP, 0x00 }, + { OV511_REG_BUS, R511_FIFO_OPTS, 0xff }, + { OV511_REG_BUS, R511_COMP_EN, 0x00 }, + { OV511_REG_BUS, R511_COMP_LUT_EN, 0x03 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + PDEBUG(4, ""); + + ov->customid = reg_r(ov, R511_SYS_CUST_ID); + if (ov->customid < 0) { + err("Unable to read camera bridge registers"); + goto error; + } + + PDEBUG (1, "CustomID = %d", ov->customid); + ov->desc = symbolic(camlist, ov->customid); + info("model: %s", ov->desc); + + if (0 == strcmp(ov->desc, NOT_DEFINED_STR)) { + err("Camera type (%d) not recognized", ov->customid); + err("Please notify " EMAIL " of the name,"); + err("manufacturer, model, and this number of your camera."); + err("Also include the output of the detection process."); + } + + if (ov->customid == 70) /* USB Life TV (PAL/SECAM) */ + ov->pal = 1; + + if (write_regvals(ov, aRegvalsInit511)) + goto error; + + if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 0); + + /* The OV511+ has undocumented bits in the flow control register. + * Setting it to 0xff fixes the corruption with moving objects. */ + if (ov->bridge == BRG_OV511) { + if (write_regvals(ov, aRegvalsNorm511)) + goto error; + } else if (ov->bridge == BRG_OV511PLUS) { + if (write_regvals(ov, aRegvalsNorm511Plus)) + goto error; + } else { + err("Invalid bridge"); + } + + if (ov511_init_compression(ov)) + goto error; + + ov->packet_numbering = 1; + ov511_set_packet_size(ov, 0); + + ov->snap_enabled = snapshot; + + /* Test for 7xx0 */ + PDEBUG(3, "Testing for 0V7xx0"); + ov->primary_i2c_slave = OV7xx0_SID; + if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) + goto error; + + if (i2c_w(ov, 0x12, 0x80) < 0) { + /* Test for 6xx0 */ + PDEBUG(3, "Testing for 0V6xx0"); + ov->primary_i2c_slave = OV6xx0_SID; + if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0) + goto error; + + if (i2c_w(ov, 0x12, 0x80) < 0) { + /* Test for 8xx0 */ + PDEBUG(3, "Testing for 0V8xx0"); + ov->primary_i2c_slave = OV8xx0_SID; + if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0) + goto error; + + if (i2c_w(ov, 0x12, 0x80) < 0) { + /* Test for SAA7111A */ + PDEBUG(3, "Testing for SAA7111A"); + ov->primary_i2c_slave = SAA7111A_SID; + if (ov51x_set_slave_ids(ov, SAA7111A_SID) < 0) + goto error; + + if (i2c_w(ov, 0x0d, 0x00) < 0) { + /* Test for KS0127 */ + PDEBUG(3, "Testing for KS0127"); + ov->primary_i2c_slave = KS0127_SID; + if (ov51x_set_slave_ids(ov, KS0127_SID) < 0) + goto error; + + if (i2c_w(ov, 0x10, 0x00) < 0) { + err("Can't determine sensor slave IDs"); + goto error; + } else { + if (ks0127_configure(ov) < 0) { + err("Failed to configure KS0127"); + goto error; + } + } + } else { + if (saa7111a_configure(ov) < 0) { + err("Failed to configure SAA7111A"); + goto error; + } + } + } else { + err("Detected unsupported OV8xx0 sensor"); + goto error; + } + } else { + if (ov6xx0_configure(ov) < 0) { + err("Failed to configure OV6xx0"); + goto error; + } + } + } else { + if (ov7xx0_configure(ov) < 0) { + err("Failed to configure OV7xx0"); + goto error; + } + } + + return 0; + +error: + err("OV511 Config failed"); + + return -EBUSY; +} + +/* This initializes the OV518/OV518+ and the sensor */ +static int +ov518_configure(struct usb_ov511 *ov) +{ + /* For 518 and 518+ */ + static struct ov511_regvals aRegvalsInit518[] = { + { OV511_REG_BUS, R51x_SYS_RESET, 0x40 }, + { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x3e }, + { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, + { OV511_REG_BUS, R51x_SYS_RESET, 0x00 }, + { OV511_REG_BUS, R51x_SYS_INIT, 0xe1 }, + { OV511_REG_BUS, 0x46, 0x00 }, + { OV511_REG_BUS, 0x5d, 0x03 }, + { OV511_DONE_BUS, 0x0, 0x00}, + }; + + static struct ov511_regvals aRegvalsNorm518[] = { + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */ + { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */ + { OV511_REG_BUS, 0x31, 0x0f }, + { OV511_REG_BUS, 0x5d, 0x03 }, + { OV511_REG_BUS, 0x24, 0x9f }, + { OV511_REG_BUS, 0x25, 0x90 }, + { OV511_REG_BUS, 0x20, 0x00 }, + { OV511_REG_BUS, 0x51, 0x04 }, + { OV511_REG_BUS, 0x71, 0x19 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + static struct ov511_regvals aRegvalsNorm518Plus[] = { + { OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */ + { OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */ + { OV511_REG_BUS, 0x31, 0x0f }, + { OV511_REG_BUS, 0x5d, 0x03 }, + { OV511_REG_BUS, 0x24, 0x9f }, + { OV511_REG_BUS, 0x25, 0x90 }, + { OV511_REG_BUS, 0x20, 0x60 }, + { OV511_REG_BUS, 0x51, 0x02 }, + { OV511_REG_BUS, 0x71, 0x19 }, + { OV511_REG_BUS, 0x40, 0xff }, + { OV511_REG_BUS, 0x41, 0x42 }, + { OV511_REG_BUS, 0x46, 0x00 }, + { OV511_REG_BUS, 0x33, 0x04 }, + { OV511_REG_BUS, 0x21, 0x19 }, + { OV511_REG_BUS, 0x3f, 0x10 }, + { OV511_DONE_BUS, 0x0, 0x00 }, + }; + + PDEBUG(4, ""); + + /* First 5 bits of custom ID reg are a revision ID on OV518 */ + info("Device revision %d", 0x1F & reg_r(ov, R511_SYS_CUST_ID)); + + /* Give it the default description */ + ov->desc = symbolic(camlist, 0); + + if (write_regvals(ov, aRegvalsInit518)) + goto error; + + /* Set LED GPIO pin to output mode */ + if (reg_w_mask(ov, 0x57, 0x00, 0x02) < 0) + goto error; + + /* LED is off by default with OV518; have to explicitly turn it on */ + if (ov->led_policy == LED_OFF || ov->led_policy == LED_AUTO) + ov51x_led_control(ov, 0); + else + ov51x_led_control(ov, 1); + + /* Don't require compression if dumppix is enabled; otherwise it's + * required. OV518 has no uncompressed mode, to save RAM. */ + if (!dumppix && !ov->compress) { + ov->compress = 1; + warn("Compression required with OV518...enabling"); + } + + if (ov->bridge == BRG_OV518) { + if (write_regvals(ov, aRegvalsNorm518)) + goto error; + } else if (ov->bridge == BRG_OV518PLUS) { + if (write_regvals(ov, aRegvalsNorm518Plus)) + goto error; + } else { + err("Invalid bridge"); + } + + if (reg_w(ov, 0x2f, 0x80) < 0) + goto error; + + if (ov518_init_compression(ov)) + goto error; + + if (ov->bridge == BRG_OV518) + { + struct usb_interface *ifp; + struct usb_host_interface *alt; + __u16 mxps = 0; + + ifp = usb_ifnum_to_if(ov->dev, 0); + if (ifp) { + alt = usb_altnum_to_altsetting(ifp, 7); + if (alt) + mxps = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + } + + /* Some OV518s have packet numbering by default, some don't */ + if (mxps == 897) + ov->packet_numbering = 1; + else + ov->packet_numbering = 0; + } else { + /* OV518+ has packet numbering turned on by default */ + ov->packet_numbering = 1; + } + + ov518_set_packet_size(ov, 0); + + ov->snap_enabled = snapshot; + + /* Test for 76xx */ + ov->primary_i2c_slave = OV7xx0_SID; + if (ov51x_set_slave_ids(ov, OV7xx0_SID) < 0) + goto error; + + /* The OV518 must be more aggressive about sensor detection since + * I2C write will never fail if the sensor is not present. We have + * to try to initialize the sensor to detect its presence */ + + if (init_ov_sensor(ov) < 0) { + /* Test for 6xx0 */ + ov->primary_i2c_slave = OV6xx0_SID; + if (ov51x_set_slave_ids(ov, OV6xx0_SID) < 0) + goto error; + + if (init_ov_sensor(ov) < 0) { + /* Test for 8xx0 */ + ov->primary_i2c_slave = OV8xx0_SID; + if (ov51x_set_slave_ids(ov, OV8xx0_SID) < 0) + goto error; + + if (init_ov_sensor(ov) < 0) { + err("Can't determine sensor slave IDs"); + goto error; + } else { + err("Detected unsupported OV8xx0 sensor"); + goto error; + } + } else { + if (ov6xx0_configure(ov) < 0) { + err("Failed to configure OV6xx0"); + goto error; + } + } + } else { + if (ov7xx0_configure(ov) < 0) { + err("Failed to configure OV7xx0"); + goto error; + } + } + + ov->maxwidth = 352; + ov->maxheight = 288; + + // The OV518 cannot go as low as the sensor can + ov->minwidth = 160; + ov->minheight = 120; + + return 0; + +error: + err("OV518 Config failed"); + + return -EBUSY; +} + +/**************************************************************************** + * sysfs + ***************************************************************************/ + +static inline struct usb_ov511 *cd_to_ov(struct class_device *cd) +{ + struct video_device *vdev = to_video_device(cd); + return video_get_drvdata(vdev); +} + +static ssize_t show_custom_id(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%d\n", ov->customid); +} +static CLASS_DEVICE_ATTR(custom_id, S_IRUGO, show_custom_id, NULL); + +static ssize_t show_model(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%s\n", ov->desc); +} +static CLASS_DEVICE_ATTR(model, S_IRUGO, show_model, NULL); + +static ssize_t show_bridge(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%s\n", symbolic(brglist, ov->bridge)); +} +static CLASS_DEVICE_ATTR(bridge, S_IRUGO, show_bridge, NULL); + +static ssize_t show_sensor(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + return sprintf(buf, "%s\n", symbolic(senlist, ov->sensor)); +} +static CLASS_DEVICE_ATTR(sensor, S_IRUGO, show_sensor, NULL); + +static ssize_t show_brightness(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_brightness(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(brightness, S_IRUGO, show_brightness, NULL); + +static ssize_t show_saturation(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_saturation(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(saturation, S_IRUGO, show_saturation, NULL); + +static ssize_t show_contrast(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_contrast(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(contrast, S_IRUGO, show_contrast, NULL); + +static ssize_t show_hue(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned short x; + + if (!ov->dev) + return -ENODEV; + sensor_get_hue(ov, &x); + return sprintf(buf, "%d\n", x >> 8); +} +static CLASS_DEVICE_ATTR(hue, S_IRUGO, show_hue, NULL); + +static ssize_t show_exposure(struct class_device *cd, char *buf) +{ + struct usb_ov511 *ov = cd_to_ov(cd); + unsigned char exp = 0; + + if (!ov->dev) + return -ENODEV; + sensor_get_exposure(ov, &exp); + return sprintf(buf, "%d\n", exp >> 8); +} +static CLASS_DEVICE_ATTR(exposure, S_IRUGO, show_exposure, NULL); + +static void ov_create_sysfs(struct video_device *vdev) +{ + video_device_create_file(vdev, &class_device_attr_custom_id); + video_device_create_file(vdev, &class_device_attr_model); + video_device_create_file(vdev, &class_device_attr_bridge); + video_device_create_file(vdev, &class_device_attr_sensor); + video_device_create_file(vdev, &class_device_attr_brightness); + video_device_create_file(vdev, &class_device_attr_saturation); + video_device_create_file(vdev, &class_device_attr_contrast); + video_device_create_file(vdev, &class_device_attr_hue); + video_device_create_file(vdev, &class_device_attr_exposure); +} + +/**************************************************************************** + * USB routines + ***************************************************************************/ + +static int +ov51x_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_interface_descriptor *idesc; + struct usb_ov511 *ov; + int i; + + PDEBUG(1, "probing for device..."); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + idesc = &intf->cur_altsetting->desc; + + if (idesc->bInterfaceClass != 0xFF) + return -ENODEV; + if (idesc->bInterfaceSubClass != 0x00) + return -ENODEV; + + if ((ov = kzalloc(sizeof(*ov), GFP_KERNEL)) == NULL) { + err("couldn't kmalloc ov struct"); + goto error_out; + } + + ov->dev = dev; + ov->iface = idesc->bInterfaceNumber; + ov->led_policy = led; + ov->compress = compress; + ov->lightfreq = lightfreq; + ov->num_inputs = 1; /* Video decoder init functs. change this */ + ov->stop_during_set = !fastset; + ov->backlight = backlight; + ov->mirror = mirror; + ov->auto_brt = autobright; + ov->auto_gain = autogain; + ov->auto_exp = autoexp; + + switch (le16_to_cpu(dev->descriptor.idProduct)) { + case PROD_OV511: + ov->bridge = BRG_OV511; + ov->bclass = BCL_OV511; + break; + case PROD_OV511PLUS: + ov->bridge = BRG_OV511PLUS; + ov->bclass = BCL_OV511; + break; + case PROD_OV518: + ov->bridge = BRG_OV518; + ov->bclass = BCL_OV518; + break; + case PROD_OV518PLUS: + ov->bridge = BRG_OV518PLUS; + ov->bclass = BCL_OV518; + break; + case PROD_ME2CAM: + if (le16_to_cpu(dev->descriptor.idVendor) != VEND_MATTEL) + goto error; + ov->bridge = BRG_OV511PLUS; + ov->bclass = BCL_OV511; + break; + default: + err("Unknown product ID 0x%04x", le16_to_cpu(dev->descriptor.idProduct)); + goto error; + } + + info("USB %s video device found", symbolic(brglist, ov->bridge)); + + init_waitqueue_head(&ov->wq); + + mutex_init(&ov->lock); /* to 1 == available */ + mutex_init(&ov->buf_lock); + mutex_init(&ov->i2c_lock); + mutex_init(&ov->cbuf_lock); + + ov->buf_state = BUF_NOT_ALLOCATED; + + if (usb_make_path(dev, ov->usb_path, OV511_USB_PATH_LEN) < 0) { + err("usb_make_path error"); + goto error; + } + + /* Allocate control transfer buffer. */ + /* Must be kmalloc()'ed, for DMA compatibility */ + ov->cbuf = kmalloc(OV511_CBUF_SIZE, GFP_KERNEL); + if (!ov->cbuf) + goto error; + + if (ov->bclass == BCL_OV518) { + if (ov518_configure(ov) < 0) + goto error; + } else { + if (ov511_configure(ov) < 0) + goto error; + } + + for (i = 0; i < OV511_NUMFRAMES; i++) { + ov->frame[i].framenum = i; + init_waitqueue_head(&ov->frame[i].wq); + } + + for (i = 0; i < OV511_NUMSBUF; i++) { + ov->sbuf[i].ov = ov; + spin_lock_init(&ov->sbuf[i].lock); + ov->sbuf[i].n = i; + } + + /* Unnecessary? (This is done on open(). Need to make sure variables + * are properly initialized without this before removing it, though). */ + if (ov51x_set_default_params(ov) < 0) + goto error; + +#ifdef OV511_DEBUG + if (dump_bridge) { + if (ov->bclass == BCL_OV511) + ov511_dump_regs(ov); + else + ov518_dump_regs(ov); + } +#endif + + ov->vdev = video_device_alloc(); + if (!ov->vdev) + goto error; + + memcpy(ov->vdev, &vdev_template, sizeof(*ov->vdev)); + ov->vdev->dev = &dev->dev; + video_set_drvdata(ov->vdev, ov); + + for (i = 0; i < OV511_MAX_UNIT_VIDEO; i++) { + /* Minor 0 cannot be specified; assume user wants autodetect */ + if (unit_video[i] == 0) + break; + + if (video_register_device(ov->vdev, VFL_TYPE_GRABBER, + unit_video[i]) >= 0) { + break; + } + } + + /* Use the next available one */ + if ((ov->vdev->minor == -1) && + video_register_device(ov->vdev, VFL_TYPE_GRABBER, -1) < 0) { + err("video_register_device failed"); + goto error; + } + + info("Device at %s registered to minor %d", ov->usb_path, + ov->vdev->minor); + + usb_set_intfdata(intf, ov); + ov_create_sysfs(ov->vdev); + return 0; + +error: + if (ov->vdev) { + if (-1 == ov->vdev->minor) + video_device_release(ov->vdev); + else + video_unregister_device(ov->vdev); + ov->vdev = NULL; + } + + if (ov->cbuf) { + mutex_lock(&ov->cbuf_lock); + kfree(ov->cbuf); + ov->cbuf = NULL; + mutex_unlock(&ov->cbuf_lock); + } + + kfree(ov); + ov = NULL; + +error_out: + err("Camera initialization failed"); + return -EIO; +} + +static void +ov51x_disconnect(struct usb_interface *intf) +{ + struct usb_ov511 *ov = usb_get_intfdata(intf); + int n; + + PDEBUG(3, ""); + + usb_set_intfdata (intf, NULL); + + if (!ov) + return; + + if (ov->vdev) + video_unregister_device(ov->vdev); + + for (n = 0; n < OV511_NUMFRAMES; n++) + ov->frame[n].grabstate = FRAME_ERROR; + + ov->curframe = -1; + + /* This will cause the process to request another frame */ + for (n = 0; n < OV511_NUMFRAMES; n++) + wake_up_interruptible(&ov->frame[n].wq); + + wake_up_interruptible(&ov->wq); + + ov->streaming = 0; + ov51x_unlink_isoc(ov); + + ov->dev = NULL; + + /* Free the memory */ + if (ov && !ov->user) { + mutex_lock(&ov->cbuf_lock); + kfree(ov->cbuf); + ov->cbuf = NULL; + mutex_unlock(&ov->cbuf_lock); + + ov51x_dealloc(ov); + kfree(ov); + ov = NULL; + } + + PDEBUG(3, "Disconnect complete"); +} + +static struct usb_driver ov511_driver = { + .name = "ov511", + .id_table = device_table, + .probe = ov51x_probe, + .disconnect = ov51x_disconnect +}; + +/**************************************************************************** + * + * Module routines + * + ***************************************************************************/ + +static int __init +usb_ov511_init(void) +{ + int retval; + + retval = usb_register(&ov511_driver); + if (retval) + goto out; + + info(DRIVER_VERSION " : " DRIVER_DESC); + +out: + return retval; +} + +static void __exit +usb_ov511_exit(void) +{ + usb_deregister(&ov511_driver); + info("driver deregistered"); + +} + +module_init(usb_ov511_init); +module_exit(usb_ov511_exit); + diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h new file mode 100644 index 000000000000..12b3d51e1c34 --- /dev/null +++ b/drivers/media/video/ov511.h @@ -0,0 +1,568 @@ +#ifndef __LINUX_OV511_H +#define __LINUX_OV511_H + +#include <asm/uaccess.h> +#include <linux/videodev.h> +#include <linux/smp_lock.h> +#include <linux/usb.h> +#include <linux/mutex.h> + +#define OV511_DEBUG /* Turn on debug messages */ + +#ifdef OV511_DEBUG + #define PDEBUG(level, fmt, args...) \ + if (debug >= (level)) info("[%s:%d] " fmt, \ + __FUNCTION__, __LINE__ , ## args) +#else + #define PDEBUG(level, fmt, args...) do {} while(0) +#endif + +/* This macro restricts an int variable to an inclusive range */ +#define RESTRICT_TO_RANGE(v,mi,ma) { \ + if ((v) < (mi)) (v) = (mi); \ + else if ((v) > (ma)) (v) = (ma); \ +} + +/* --------------------------------- */ +/* DEFINES FOR OV511 AND OTHER CHIPS */ +/* --------------------------------- */ + +/* USB IDs */ +#define VEND_OMNIVISION 0x05A9 +#define PROD_OV511 0x0511 +#define PROD_OV511PLUS 0xA511 +#define PROD_OV518 0x0518 +#define PROD_OV518PLUS 0xA518 + +#define VEND_MATTEL 0x0813 +#define PROD_ME2CAM 0x0002 + +/* --------------------------------- */ +/* OV51x REGISTER MNEMONICS */ +/* --------------------------------- */ + +/* Camera interface register numbers */ +#define R511_CAM_DELAY 0x10 +#define R511_CAM_EDGE 0x11 +#define R511_CAM_PXCNT 0x12 +#define R511_CAM_LNCNT 0x13 +#define R511_CAM_PXDIV 0x14 +#define R511_CAM_LNDIV 0x15 +#define R511_CAM_UV_EN 0x16 +#define R511_CAM_LINE_MODE 0x17 +#define R511_CAM_OPTS 0x18 + +/* Snapshot mode camera interface register numbers */ +#define R511_SNAP_FRAME 0x19 +#define R511_SNAP_PXCNT 0x1A +#define R511_SNAP_LNCNT 0x1B +#define R511_SNAP_PXDIV 0x1C +#define R511_SNAP_LNDIV 0x1D +#define R511_SNAP_UV_EN 0x1E +#define R511_SNAP_OPTS 0x1F + +/* DRAM register numbers */ +#define R511_DRAM_FLOW_CTL 0x20 +#define R511_DRAM_ARCP 0x21 +#define R511_DRAM_MRC 0x22 +#define R511_DRAM_RFC 0x23 + +/* ISO FIFO register numbers */ +#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ +#define R511_FIFO_OPTS 0x31 + +/* Parallel IO register numbers */ +#define R511_PIO_OPTS 0x38 +#define R511_PIO_DATA 0x39 +#define R511_PIO_BIST 0x3E +#define R518_GPIO_IN 0x55 /* OV518(+) only */ +#define R518_GPIO_OUT 0x56 /* OV518(+) only */ +#define R518_GPIO_CTL 0x57 /* OV518(+) only */ +#define R518_GPIO_PULSE_IN 0x58 /* OV518(+) only */ +#define R518_GPIO_PULSE_CLEAR 0x59 /* OV518(+) only */ +#define R518_GPIO_PULSE_POL 0x5a /* OV518(+) only */ +#define R518_GPIO_PULSE_EN 0x5b /* OV518(+) only */ +#define R518_GPIO_RESET 0x5c /* OV518(+) only */ + +/* I2C registers */ +#define R511_I2C_CTL 0x40 +#define R518_I2C_CTL 0x47 /* OV518(+) only */ +#define R51x_I2C_W_SID 0x41 +#define R51x_I2C_SADDR_3 0x42 +#define R51x_I2C_SADDR_2 0x43 +#define R51x_I2C_R_SID 0x44 +#define R51x_I2C_DATA 0x45 +#define R51x_I2C_CLOCK 0x46 +#define R51x_I2C_TIMEOUT 0x47 + +/* I2C snapshot registers */ +#define R511_SI2C_SADDR_3 0x48 +#define R511_SI2C_DATA 0x49 + +/* System control registers */ +#define R51x_SYS_RESET 0x50 + /* Reset type definitions */ +#define OV511_RESET_UDC 0x01 +#define OV511_RESET_I2C 0x02 +#define OV511_RESET_FIFO 0x04 +#define OV511_RESET_OMNICE 0x08 +#define OV511_RESET_DRAM 0x10 +#define OV511_RESET_CAM_INT 0x20 +#define OV511_RESET_OV511 0x40 +#define OV511_RESET_NOREGS 0x3F /* All but OV511 & regs */ +#define OV511_RESET_ALL 0x7F + +#define R511_SYS_CLOCK_DIV 0x51 +#define R51x_SYS_SNAP 0x52 +#define R51x_SYS_INIT 0x53 +#define R511_SYS_PWR_CLK 0x54 /* OV511+/OV518(+) only */ +#define R511_SYS_LED_CTL 0x55 /* OV511+ only */ +#define R511_SYS_USER 0x5E +#define R511_SYS_CUST_ID 0x5F + +/* OmniCE (compression) registers */ +#define R511_COMP_PHY 0x70 +#define R511_COMP_PHUV 0x71 +#define R511_COMP_PVY 0x72 +#define R511_COMP_PVUV 0x73 +#define R511_COMP_QHY 0x74 +#define R511_COMP_QHUV 0x75 +#define R511_COMP_QVY 0x76 +#define R511_COMP_QVUV 0x77 +#define R511_COMP_EN 0x78 +#define R511_COMP_LUT_EN 0x79 +#define R511_COMP_LUT_BEGIN 0x80 + +/* --------------------------------- */ +/* ALTERNATE NUMBERS */ +/* --------------------------------- */ + +/* Alternate numbers for various max packet sizes (OV511 only) */ +#define OV511_ALT_SIZE_992 0 +#define OV511_ALT_SIZE_993 1 +#define OV511_ALT_SIZE_768 2 +#define OV511_ALT_SIZE_769 3 +#define OV511_ALT_SIZE_512 4 +#define OV511_ALT_SIZE_513 5 +#define OV511_ALT_SIZE_257 6 +#define OV511_ALT_SIZE_0 7 + +/* Alternate numbers for various max packet sizes (OV511+ only) */ +#define OV511PLUS_ALT_SIZE_0 0 +#define OV511PLUS_ALT_SIZE_33 1 +#define OV511PLUS_ALT_SIZE_129 2 +#define OV511PLUS_ALT_SIZE_257 3 +#define OV511PLUS_ALT_SIZE_385 4 +#define OV511PLUS_ALT_SIZE_513 5 +#define OV511PLUS_ALT_SIZE_769 6 +#define OV511PLUS_ALT_SIZE_961 7 + +/* Alternate numbers for various max packet sizes (OV518(+) only) */ +#define OV518_ALT_SIZE_0 0 +#define OV518_ALT_SIZE_128 1 +#define OV518_ALT_SIZE_256 2 +#define OV518_ALT_SIZE_384 3 +#define OV518_ALT_SIZE_512 4 +#define OV518_ALT_SIZE_640 5 +#define OV518_ALT_SIZE_768 6 +#define OV518_ALT_SIZE_896 7 + +/* --------------------------------- */ +/* OV7610 REGISTER MNEMONICS */ +/* --------------------------------- */ + +/* OV7610 registers */ +#define OV7610_REG_GAIN 0x00 /* gain setting (5:0) */ +#define OV7610_REG_BLUE 0x01 /* blue channel balance */ +#define OV7610_REG_RED 0x02 /* red channel balance */ +#define OV7610_REG_SAT 0x03 /* saturation */ + /* 04 reserved */ +#define OV7610_REG_CNT 0x05 /* Y contrast */ +#define OV7610_REG_BRT 0x06 /* Y brightness */ + /* 08-0b reserved */ +#define OV7610_REG_BLUE_BIAS 0x0C /* blue channel bias (5:0) */ +#define OV7610_REG_RED_BIAS 0x0D /* read channel bias (5:0) */ +#define OV7610_REG_GAMMA_COEFF 0x0E /* gamma settings */ +#define OV7610_REG_WB_RANGE 0x0F /* AEC/ALC/S-AWB settings */ +#define OV7610_REG_EXP 0x10 /* manual exposure setting */ +#define OV7610_REG_CLOCK 0x11 /* polarity/clock prescaler */ +#define OV7610_REG_COM_A 0x12 /* misc common regs */ +#define OV7610_REG_COM_B 0x13 /* misc common regs */ +#define OV7610_REG_COM_C 0x14 /* misc common regs */ +#define OV7610_REG_COM_D 0x15 /* misc common regs */ +#define OV7610_REG_FIELD_DIVIDE 0x16 /* field interval/mode settings */ +#define OV7610_REG_HWIN_START 0x17 /* horizontal window start */ +#define OV7610_REG_HWIN_END 0x18 /* horizontal window end */ +#define OV7610_REG_VWIN_START 0x19 /* vertical window start */ +#define OV7610_REG_VWIN_END 0x1A /* vertical window end */ +#define OV7610_REG_PIXEL_SHIFT 0x1B /* pixel shift */ +#define OV7610_REG_ID_HIGH 0x1C /* manufacturer ID MSB */ +#define OV7610_REG_ID_LOW 0x1D /* manufacturer ID LSB */ + /* 0e-0f reserved */ +#define OV7610_REG_COM_E 0x20 /* misc common regs */ +#define OV7610_REG_YOFFSET 0x21 /* Y channel offset */ +#define OV7610_REG_UOFFSET 0x22 /* U channel offset */ + /* 23 reserved */ +#define OV7610_REG_ECW 0x24 /* Exposure white level for AEC */ +#define OV7610_REG_ECB 0x25 /* Exposure black level for AEC */ +#define OV7610_REG_COM_F 0x26 /* misc settings */ +#define OV7610_REG_COM_G 0x27 /* misc settings */ +#define OV7610_REG_COM_H 0x28 /* misc settings */ +#define OV7610_REG_COM_I 0x29 /* misc settings */ +#define OV7610_REG_FRAMERATE_H 0x2A /* frame rate MSB + misc */ +#define OV7610_REG_FRAMERATE_L 0x2B /* frame rate LSB */ +#define OV7610_REG_ALC 0x2C /* Auto Level Control settings */ +#define OV7610_REG_COM_J 0x2D /* misc settings */ +#define OV7610_REG_VOFFSET 0x2E /* V channel offset adjustment */ +#define OV7610_REG_ARRAY_BIAS 0x2F /* Array bias -- don't change */ + /* 30-32 reserved */ +#define OV7610_REG_YGAMMA 0x33 /* misc gamma settings (7:6) */ +#define OV7610_REG_BIAS_ADJUST 0x34 /* misc bias settings */ +#define OV7610_REG_COM_L 0x35 /* misc settings */ + /* 36-37 reserved */ +#define OV7610_REG_COM_K 0x38 /* misc registers */ + +/* --------------------------------- */ +/* I2C ADDRESSES */ +/* --------------------------------- */ + +#define OV7xx0_SID 0x42 +#define OV6xx0_SID 0xC0 +#define OV8xx0_SID 0xA0 +#define KS0127_SID 0xD8 +#define SAA7111A_SID 0x48 + +/* --------------------------------- */ +/* MISCELLANEOUS DEFINES */ +/* --------------------------------- */ + +#define I2C_CLOCK_PRESCALER 0x03 + +#define FRAMES_PER_DESC 10 /* FIXME - What should this be? */ +#define MAX_FRAME_SIZE_PER_DESC 993 /* For statically allocated stuff */ +#define PIXELS_PER_SEG 256 /* Pixels per segment */ + +#define OV511_ENDPOINT_ADDRESS 1 /* Isoc endpoint number */ + +#define OV511_NUMFRAMES 2 +#if OV511_NUMFRAMES > VIDEO_MAX_FRAME + #error "OV511_NUMFRAMES is too high" +#endif + +#define OV511_NUMSBUF 2 + +/* Control transfers use up to 4 bytes */ +#define OV511_CBUF_SIZE 4 + +/* Size of usb_make_path() buffer */ +#define OV511_USB_PATH_LEN 64 + +/* Bridge types */ +enum { + BRG_UNKNOWN, + BRG_OV511, + BRG_OV511PLUS, + BRG_OV518, + BRG_OV518PLUS, +}; + +/* Bridge classes */ +enum { + BCL_UNKNOWN, + BCL_OV511, + BCL_OV518, +}; + +/* Sensor types */ +enum { + SEN_UNKNOWN, + SEN_OV76BE, + SEN_OV7610, + SEN_OV7620, + SEN_OV7620AE, + SEN_OV6620, + SEN_OV6630, + SEN_OV6630AE, + SEN_OV6630AF, + SEN_OV8600, + SEN_KS0127, + SEN_KS0127B, + SEN_SAA7111A, +}; + +enum { + STATE_SCANNING, /* Scanning for start */ + STATE_HEADER, /* Parsing header */ + STATE_LINES, /* Parsing lines */ +}; + +/* Buffer states */ +enum { + BUF_NOT_ALLOCATED, + BUF_ALLOCATED, +}; + +/* --------- Definition of ioctl interface --------- */ + +#define OV511_INTERFACE_VER 101 + +/* LED options */ +enum { + LED_OFF, + LED_ON, + LED_AUTO, +}; + +/* Raw frame formats */ +enum { + RAWFMT_INVALID, + RAWFMT_YUV400, + RAWFMT_YUV420, + RAWFMT_YUV422, + RAWFMT_GBR422, +}; + +struct ov511_i2c_struct { + unsigned char slave; /* Write slave ID (read ID - 1) */ + unsigned char reg; /* Index of register */ + unsigned char value; /* User sets this w/ write, driver does w/ read */ + unsigned char mask; /* Bits to be changed. Not used with read ops */ +}; + +/* ioctls */ +#define OV511IOC_WI2C _IOW('v', BASE_VIDIOCPRIVATE + 5, \ + struct ov511_i2c_struct) +#define OV511IOC_RI2C _IOWR('v', BASE_VIDIOCPRIVATE + 6, \ + struct ov511_i2c_struct) +/* ------------- End IOCTL interface -------------- */ + +struct usb_ov511; /* Forward declaration */ + +struct ov511_sbuf { + struct usb_ov511 *ov; + unsigned char *data; + struct urb *urb; + spinlock_t lock; + int n; +}; + +enum { + FRAME_UNUSED, /* Unused (no MCAPTURE) */ + FRAME_READY, /* Ready to start grabbing */ + FRAME_GRABBING, /* In the process of being grabbed into */ + FRAME_DONE, /* Finished grabbing, but not been synced yet */ + FRAME_ERROR, /* Something bad happened while processing */ +}; + +struct ov511_regvals { + enum { + OV511_DONE_BUS, + OV511_REG_BUS, + OV511_I2C_BUS, + } bus; + unsigned char reg; + unsigned char val; +}; + +struct ov511_frame { + int framenum; /* Index of this frame */ + unsigned char *data; /* Frame buffer */ + unsigned char *tempdata; /* Temp buffer for multi-stage conversions */ + unsigned char *rawdata; /* Raw camera data buffer */ + unsigned char *compbuf; /* Temp buffer for decompressor */ + + int depth; /* Bytes per pixel */ + int width; /* Width application is expecting */ + int height; /* Height application is expecting */ + + int rawwidth; /* Actual width of frame sent from camera */ + int rawheight; /* Actual height of frame sent from camera */ + + int sub_flag; /* Sub-capture mode for this frame? */ + unsigned int format; /* Format for this frame */ + int compressed; /* Is frame compressed? */ + + volatile int grabstate; /* State of grabbing */ + int scanstate; /* State of scanning */ + + int bytes_recvd; /* Number of image bytes received from camera */ + + long bytes_read; /* Amount that has been read() */ + + wait_queue_head_t wq; /* Processes waiting */ + + int snapshot; /* True if frame was a snapshot */ +}; + +#define DECOMP_INTERFACE_VER 4 + +/* Compression module operations */ +struct ov51x_decomp_ops { + int (*decomp_400)(unsigned char *, unsigned char *, unsigned char *, + int, int, int); + int (*decomp_420)(unsigned char *, unsigned char *, unsigned char *, + int, int, int); + int (*decomp_422)(unsigned char *, unsigned char *, unsigned char *, + int, int, int); + struct module *owner; +}; + +struct usb_ov511 { + struct video_device *vdev; + struct usb_device *dev; + + int customid; + char *desc; + unsigned char iface; + char usb_path[OV511_USB_PATH_LEN]; + + /* Determined by sensor type */ + int maxwidth; + int maxheight; + int minwidth; + int minheight; + + int brightness; + int colour; + int contrast; + int hue; + int whiteness; + int exposure; + int auto_brt; /* Auto brightness enabled flag */ + int auto_gain; /* Auto gain control enabled flag */ + int auto_exp; /* Auto exposure enabled flag */ + int backlight; /* Backlight exposure algorithm flag */ + int mirror; /* Image is reversed horizontally */ + + int led_policy; /* LED: off|on|auto; OV511+ only */ + + struct mutex lock; /* Serializes user-accessible operations */ + int user; /* user count for exclusive use */ + + int streaming; /* Are we streaming Isochronous? */ + int grabbing; /* Are we grabbing? */ + + int compress; /* Should the next frame be compressed? */ + int compress_inited; /* Are compression params uploaded? */ + + int lightfreq; /* Power (lighting) frequency */ + int bandfilt; /* Banding filter enabled flag */ + + unsigned char *fbuf; /* Videodev buffer area */ + unsigned char *tempfbuf; /* Temporary (intermediate) buffer area */ + unsigned char *rawfbuf; /* Raw camera data buffer area */ + + int sub_flag; /* Pix Array subcapture on flag */ + int subx; /* Pix Array subcapture x offset */ + int suby; /* Pix Array subcapture y offset */ + int subw; /* Pix Array subcapture width */ + int subh; /* Pix Array subcapture height */ + + int curframe; /* Current receiving sbuf */ + struct ov511_frame frame[OV511_NUMFRAMES]; + + struct ov511_sbuf sbuf[OV511_NUMSBUF]; + + wait_queue_head_t wq; /* Processes waiting */ + + int snap_enabled; /* Snapshot mode enabled */ + + int bridge; /* Type of bridge (BRG_*) */ + int bclass; /* Class of bridge (BCL_*) */ + int sensor; /* Type of image sensor chip (SEN_*) */ + + int packet_size; /* Frame size per isoc desc */ + int packet_numbering; /* Is ISO frame numbering enabled? */ + + /* Framebuffer/sbuf management */ + int buf_state; + struct mutex buf_lock; + + struct ov51x_decomp_ops *decomp_ops; + + /* Stop streaming while changing picture settings */ + int stop_during_set; + + int stopped; /* Streaming is temporarily paused */ + + /* Video decoder stuff */ + int input; /* Composite, S-VIDEO, etc... */ + int num_inputs; /* Number of inputs */ + int norm; /* NTSC / PAL / SECAM */ + int has_decoder; /* Device has a video decoder */ + int pal; /* Device is designed for PAL resolution */ + + /* I2C interface */ + struct mutex i2c_lock; /* Protect I2C controller regs */ + unsigned char primary_i2c_slave; /* I2C write id of sensor */ + + /* Control transaction stuff */ + unsigned char *cbuf; /* Buffer for payload */ + struct mutex cbuf_lock; +}; + +/* Used to represent a list of values and their respective symbolic names */ +struct symbolic_list { + int num; + char *name; +}; + +#define NOT_DEFINED_STR "Unknown" + +/* Returns the name of the matching element in the symbolic_list array. The + * end of the list must be marked with an element that has a NULL name. + */ +static inline char * +symbolic(struct symbolic_list list[], int num) +{ + int i; + + for (i = 0; list[i].name != NULL; i++) + if (list[i].num == num) + return (list[i].name); + + return (NOT_DEFINED_STR); +} + +/* Compression stuff */ + +#define OV511_QUANTABLESIZE 64 +#define OV518_QUANTABLESIZE 32 + +#define OV511_YQUANTABLE { \ + 0, 1, 1, 2, 2, 3, 3, 4, \ + 1, 1, 1, 2, 2, 3, 4, 4, \ + 1, 1, 2, 2, 3, 4, 4, 4, \ + 2, 2, 2, 3, 4, 4, 4, 4, \ + 2, 2, 3, 4, 4, 5, 5, 5, \ + 3, 3, 4, 4, 5, 5, 5, 5, \ + 3, 4, 4, 4, 5, 5, 5, 5, \ + 4, 4, 4, 4, 5, 5, 5, 5 \ +} + +#define OV511_UVQUANTABLE { \ + 0, 2, 2, 3, 4, 4, 4, 4, \ + 2, 2, 2, 4, 4, 4, 4, 4, \ + 2, 2, 3, 4, 4, 4, 4, 4, \ + 3, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4, \ + 4, 4, 4, 4, 4, 4, 4, 4 \ +} + +#define OV518_YQUANTABLE { \ + 5, 4, 5, 6, 6, 7, 7, 7, \ + 5, 5, 5, 5, 6, 7, 7, 7, \ + 6, 6, 6, 6, 7, 7, 7, 8, \ + 7, 7, 6, 7, 7, 7, 8, 8 \ +} + +#define OV518_UVQUANTABLE { \ + 6, 6, 6, 7, 7, 7, 7, 7, \ + 6, 6, 6, 7, 7, 7, 7, 7, \ + 6, 6, 6, 7, 7, 7, 7, 8, \ + 7, 7, 7, 7, 7, 7, 8, 8 \ +} + +#endif diff --git a/drivers/media/video/ovcamchip/Makefile b/drivers/media/video/ovcamchip/Makefile index bca41ad93de8..cba4cdf20f49 100644 --- a/drivers/media/video/ovcamchip/Makefile +++ b/drivers/media/video/ovcamchip/Makefile @@ -1,4 +1,4 @@ ovcamchip-objs := ovcamchip_core.o ov6x20.o ov6x30.o ov7x10.o ov7x20.o \ - ov76be.o + ov76be.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip.o diff --git a/drivers/media/video/ovcamchip/ovcamchip_core.c b/drivers/media/video/ovcamchip/ovcamchip_core.c index e76b53d5909c..3fe9fa04cd84 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_core.c +++ b/drivers/media/video/ovcamchip/ovcamchip_core.c @@ -266,17 +266,17 @@ static int ovcamchip_detect(struct i2c_client *c) PDEBUG(3, "Testing for 0V6xx0"); c->addr = OV6xx0_SID; if (init_camchip(c) < 0) { - return -ENODEV; + return -ENODEV; } else { if (ov6xx0_detect(c) < 0) { PERROR("Failed to init OV6xx0"); - return -EIO; + return -EIO; } } } else { if (ov7xx0_detect(c) < 0) { PERROR("Failed to init OV7xx0"); - return -EIO; + return -EIO; } } diff --git a/drivers/media/video/ovcamchip/ovcamchip_priv.h b/drivers/media/video/ovcamchip/ovcamchip_priv.h index 575e612a5546..1231335a9f4a 100644 --- a/drivers/media/video/ovcamchip/ovcamchip_priv.h +++ b/drivers/media/video/ovcamchip/ovcamchip_priv.h @@ -82,6 +82,6 @@ extern int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals); extern int ov_write_mask(struct i2c_client *c, unsigned char reg, - unsigned char value, unsigned char mask); + unsigned char value, unsigned char mask); #endif diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c index f3fc361bec97..522e9ddeb089 100644 --- a/drivers/media/video/planb.c +++ b/drivers/media/video/planb.c @@ -1,4 +1,4 @@ -/* +/* planb - PlanB frame grabber driver PlanB is used in the 7x00/8x00 series of PowerMacintosh @@ -48,7 +48,7 @@ #include <asm/pgtable.h> #include <asm/page.h> #include <asm/irq.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> #include "planb.h" #include "saa7196.h" @@ -329,12 +329,12 @@ static volatile struct dbdma_cmd *cmd_geo_setup( static inline void planb_lock(struct planb *pb) { - down(&pb->lock); + mutex_lock(&pb->lock); } static inline void planb_unlock(struct planb *pb) { - up(&pb->lock); + mutex_unlock(&pb->lock); } /***************/ @@ -584,7 +584,7 @@ finish: wake_up_interruptible(&pb->suspendq); } -static void add_clip(struct planb *pb, struct video_clip *clip) +static void add_clip(struct planb *pb, struct video_clip *clip) { volatile unsigned char *base; int xc = clip->x, yc = clip->y; @@ -758,7 +758,7 @@ static void cmd_buff(struct planb *pb) PLANB_SET(CH_SYNC)); tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), PLANB_SET(DMA_ABORT)); - + /* odd field data: */ jump = virt_to_bus(c1 + nlines / 2); for (i=1; i < nlines; i += stepsize, c1++) @@ -1247,7 +1247,7 @@ static volatile struct dbdma_cmd *setup_grab_cmd(int fr, struct planb *pb) tab_cmd_dbdma(c1, DBDMA_NOP | BR_IFCLR, virt_to_bus(c1-3)); c1++; tab_cmd_store(c1++, (unsigned)(&pb->planb_base_phys->ch1.br_sel), PLANB_SET(DMA_ABORT)); - + /* odd field data: */ jump_addr = c1 + TAB_FACTOR * nlines / 2; jump = virt_to_bus(jump_addr); @@ -1383,7 +1383,7 @@ static int planb_open(struct video_device *dev, int mode) pb->user++; DEBUG("PlanB: device opened\n"); - return 0; + return 0; } static void planb_close(struct video_device *dev) @@ -1424,9 +1424,9 @@ static long planb_write(struct video_device *v, const char *buf, static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) { struct planb *pb=(struct planb *)dev; - + switch (cmd) - { + { case VIDIOCGCAP: { struct video_capability b; @@ -1440,26 +1440,26 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) b.channels = 2; /* composite & svhs */ b.audios = 0; b.maxwidth = PLANB_MAXPIXELS; - b.maxheight = PLANB_MAXLINES; - b.minwidth = 32; /* wild guess */ - b.minheight = 32; - if (copy_to_user(arg,&b,sizeof(b))) - return -EFAULT; + b.maxheight = PLANB_MAXLINES; + b.minwidth = 32; /* wild guess */ + b.minheight = 32; + if (copy_to_user(arg,&b,sizeof(b))) + return -EFAULT; return 0; } case VIDIOCSFBUF: { - struct video_buffer v; + struct video_buffer v; unsigned short bpp; unsigned int fmt; DEBUG("PlanB: IOCTL VIDIOCSFBUF\n"); - if (!capable(CAP_SYS_ADMIN) + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) - return -EPERM; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; + return -EPERM; + if (copy_from_user(&v, arg,sizeof(v))) + return -EFAULT; planb_lock(pb); switch(v.depth) { case 8: @@ -1478,7 +1478,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) break; default: planb_unlock(pb); - return -EINVAL; + return -EINVAL; } if (bpp * v.width > v.bytesperline) { planb_unlock(pb); @@ -1493,7 +1493,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) pb->win.bpl = pb->win.bpp * pb->win.swidth; pb->win.pad = v.bytesperline - pb->win.bpl; - DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d," + DEBUG("PlanB: Display at %p is %d by %d, bytedepth %d," " bpl %d (+ %d)\n", v.base, v.width,v.height, pb->win.bpp, pb->win.bpl, pb->win.pad); @@ -1504,11 +1504,11 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) resume_overlay(pb); } planb_unlock(pb); - return 0; + return 0; } case VIDIOCGFBUF: { - struct video_buffer v; + struct video_buffer v; DEBUG("PlanB: IOCTL VIDIOCGFBUF\n"); @@ -1518,15 +1518,15 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) v.depth = pb->win.depth; v.bytesperline = pb->win.bpl + pb->win.pad; if (copy_to_user(arg, &v, sizeof(v))) - return -EFAULT; + return -EFAULT; return 0; } case VIDIOCCAPTURE: { int i; - if(copy_from_user(&i, arg, sizeof(i))) - return -EFAULT; + if(copy_from_user(&i, arg, sizeof(i))) + return -EFAULT; if(i==0) { DEBUG("PlanB: IOCTL VIDIOCCAPTURE Stop\n"); @@ -1695,7 +1695,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) struct video_window vw; struct video_clip clip; int i; - + DEBUG("PlanB: IOCTL VIDIOCSWIN\n"); if(copy_from_user(&vw,arg,sizeof(vw))) @@ -1749,7 +1749,7 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) return -EFAULT; return 0; } - case VIDIOCSYNC: { + case VIDIOCSYNC: { int i; IDEBUG("PlanB: IOCTL VIDIOCSYNC\n"); @@ -1759,42 +1759,42 @@ static int planb_ioctl(struct video_device *dev, unsigned int cmd, void *arg) IDEBUG("PlanB: sync to frame %d\n", i); - if(i > (MAX_GBUFFERS - 1) || i < 0) - return -EINVAL; + if(i > (MAX_GBUFFERS - 1) || i < 0) + return -EINVAL; chk_grab: - switch (pb->frame_stat[i]) { - case GBUFFER_UNUSED: - return -EINVAL; + switch (pb->frame_stat[i]) { + case GBUFFER_UNUSED: + return -EINVAL; case GBUFFER_GRABBING: IDEBUG("PlanB: waiting for grab" " done (%d)\n", i); - interruptible_sleep_on(&pb->capq); + interruptible_sleep_on(&pb->capq); if(signal_pending(current)) return -EINTR; goto chk_grab; - case GBUFFER_DONE: - pb->frame_stat[i] = GBUFFER_UNUSED; - break; - } - return 0; + case GBUFFER_DONE: + pb->frame_stat[i] = GBUFFER_UNUSED; + break; + } + return 0; } - case VIDIOCMCAPTURE: + case VIDIOCMCAPTURE: { - struct video_mmap vm; + struct video_mmap vm; volatile unsigned int status; IDEBUG("PlanB: IOCTL VIDIOCMCAPTURE\n"); if(copy_from_user((void *) &vm,(void *)arg,sizeof(vm))) return -EFAULT; - status = pb->frame_stat[vm.frame]; - if (status != GBUFFER_UNUSED) - return -EBUSY; + status = pb->frame_stat[vm.frame]; + if (status != GBUFFER_UNUSED) + return -EBUSY; - return vgrab(pb, &vm); + return vgrab(pb, &vm); } - + case VIDIOCGMBUF: { int i; @@ -1811,7 +1811,7 @@ chk_grab: return -EFAULT; return 0; } - + case PLANBIOCGSAAREGS: { struct planb_saa_regs preg; @@ -1828,7 +1828,7 @@ chk_grab: return -EFAULT; return 0; } - + case PLANBIOCSSAAREGS: { struct planb_saa_regs preg; @@ -1842,7 +1842,7 @@ chk_grab: saa_set (preg.addr, preg.val, pb); return 0; } - + case PLANBIOCGSTAT: { struct planb_stat_regs pstat; @@ -1859,7 +1859,7 @@ chk_grab: return -EFAULT; return 0; } - + case PLANBIOCSMODE: { int v; @@ -1985,10 +1985,10 @@ static int planb_mmap(struct vm_area_struct *vma, struct video_device *dev, cons { int i; struct planb *pb = (struct planb *)dev; - unsigned long start = (unsigned long)adr; + unsigned long start = (unsigned long)adr; if (size > MAX_GBUFFERS * PLANB_MAX_FBUF) - return -EINVAL; + return -EINVAL; if (!pb->rawbuf) { int err; if((err=grabbuf_alloc(pb))) @@ -2067,7 +2067,7 @@ static int init_planb(struct planb *pb) #endif pb->tab_size = PLANB_MAXLINES + 40; pb->suspend = 0; - init_MUTEX(&pb->lock); + mutex_init(&pb->lock); pb->ch1_cmd = 0; pb->ch2_cmd = 0; pb->mask = 0; @@ -2091,10 +2091,10 @@ static int init_planb(struct planb *pb) /* clear interrupt mask */ pb->intr_mask = PLANB_CLR_IRQ; - result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb); - if (result < 0) { - if (result==-EINVAL) - printk(KERN_ERR "PlanB: Bad irq number (%d) " + result = request_irq(pb->irq, planb_irq, 0, "PlanB", (void *)pb); + if (result < 0) { + if (result==-EINVAL) + printk(KERN_ERR "PlanB: Bad irq number (%d) " "or handler\n", (int)pb->irq); else if (result==-EBUSY) printk(KERN_ERR "PlanB: I don't know why, " @@ -2102,7 +2102,7 @@ static int init_planb(struct planb *pb) return result; } disable_irq(pb->irq); - + /* Now add the template and register the device unit. */ memcpy(&pb->video_dev,&planb_template,sizeof(planb_template)); @@ -2143,7 +2143,7 @@ static int init_planb(struct planb *pb) } /* - * Scan for a PlanB controller, request the irq and map the io memory + * Scan for a PlanB controller, request the irq and map the io memory */ static int find_planb(void) @@ -2171,9 +2171,9 @@ static int find_planb(void) pb = &planbs[0]; planb_num = 1; - if (planb_devices->n_addrs != 1) { - printk (KERN_WARNING "PlanB: expecting 1 address for planb " - "(got %d)", planb_devices->n_addrs); + if (planb_devices->n_addrs != 1) { + printk (KERN_WARNING "PlanB: expecting 1 address for planb " + "(got %d)", planb_devices->n_addrs); return 0; } @@ -2236,7 +2236,7 @@ static int find_planb(void) pb->planb_base = planb_regs; pb->planb_base_phys = (struct planb_registers *)new_base; pb->irq = irq; - + return planb_num; err_out_disable: @@ -2251,7 +2251,7 @@ static void release_planb(void) int i; struct planb *pb; - for (i=0;i<planb_num; i++) + for (i=0;i<planb_num; i++) { pb=&planbs[i]; @@ -2278,7 +2278,7 @@ static void release_planb(void) static int __init init_planbs(void) { int i; - + if (find_planb()<=0) return -EIO; @@ -2288,9 +2288,9 @@ static int __init init_planbs(void) " with v4l\n", i); release_planb(); return -EIO; - } + } printk(KERN_INFO "PlanB: registered device %d with v4l\n", i); - } + } return 0; } diff --git a/drivers/media/video/planb.h b/drivers/media/video/planb.h index 8a0faad16118..92823211d0c5 100644 --- a/drivers/media/video/planb.h +++ b/drivers/media/video/planb.h @@ -1,4 +1,4 @@ -/* +/* planb - PlanB frame grabber driver PlanB is used in the 7x00/8x00 series of PowerMacintosh @@ -167,14 +167,14 @@ struct planb { struct video_device video_dev; struct video_picture picture; /* Current picture params */ struct video_audio audio_dev; /* Current audio params */ - + volatile struct planb_registers *planb_base; /* virt base of planb */ struct planb_registers *planb_base_phys; /* phys base of planb */ void *priv_space; /* Org. alloc. mem for kfree */ int user; unsigned int tab_size; int maxlines; - struct semaphore lock; + struct mutex lock; unsigned int irq; /* interrupt number */ volatile unsigned int intr_mask; @@ -209,7 +209,7 @@ struct planb { int gwidth[MAX_GBUFFERS], gheight[MAX_GBUFFERS]; unsigned int gfmt[MAX_GBUFFERS]; int gnorm_switch[MAX_GBUFFERS]; - volatile unsigned int *frame_stat; + volatile unsigned int *frame_stat; #define GBUFFER_UNUSED 0x00U #define GBUFFER_GRABBING 0x01U #define GBUFFER_DONE 0x02U diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index 9e6448639480..09835ca098b1 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -12,10 +12,10 @@ * Most of this code is directly derived from his userspace driver. * His driver works so send any reports to alan@redhat.com unless the * userspace driver also doesn't work for you... - * + * * Changes: * 08/07/2003 Daniele Bellucci <bellucda@tiscali.it> - * - pms_capture: report back -EFAULT + * - pms_capture: report back -EFAULT */ #include <linux/module.h> @@ -30,6 +30,8 @@ #include <asm/io.h> #include <linux/sched.h> #include <linux/videodev.h> +#include <linux/mutex.h> + #include <asm/uaccess.h> @@ -44,7 +46,7 @@ struct pms_device struct video_picture picture; int height; int width; - struct semaphore lock; + struct mutex lock; }; struct i2c_info @@ -64,14 +66,14 @@ static int standard = 0; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */ /* * I/O ports and Shared Memory */ - + static int io_port = 0x250; static int data_port = 0x251; static int mem_base = 0xC8000; static void __iomem *mem; static int video_nr = -1; - + static inline void mvv_write(u8 index, u8 value) { @@ -88,9 +90,9 @@ static int pms_i2c_stat(u8 slave) { int counter; int i; - + outb(0x28, io_port); - + counter=0; while((inb(data_port)&0x01)==0) if(counter++==256) @@ -99,9 +101,9 @@ static int pms_i2c_stat(u8 slave) while((inb(data_port)&0x01)!=0) if(counter++==256) break; - + outb(slave, io_port); - + counter=0; while((inb(data_port)&0x01)==0) if(counter++==256) @@ -110,7 +112,7 @@ static int pms_i2c_stat(u8 slave) while((inb(data_port)&0x01)!=0) if(counter++==256) break; - + for(i=0;i<12;i++) { char st=inb(data_port); @@ -120,7 +122,7 @@ static int pms_i2c_stat(u8 slave) break; } outb(0x29, io_port); - return inb(data_port); + return inb(data_port); } static int pms_i2c_write(u16 slave, u16 sub, u16 data) @@ -128,19 +130,19 @@ static int pms_i2c_write(u16 slave, u16 sub, u16 data) int skip=0; int count; int i; - + for(i=0;i<i2c_count;i++) { if((i2cinfo[i].slave==slave) && (i2cinfo[i].sub == sub)) { - if(i2cinfo[i].data==data) - skip=1; - i2cinfo[i].data=data; - i=i2c_count+1; + if(i2cinfo[i].data==data) + skip=1; + i2cinfo[i].data=data; + i=i2c_count+1; } } - + if(i==i2c_count && i2c_count<64) { i2cinfo[i2c_count].slave=slave; @@ -148,16 +150,16 @@ static int pms_i2c_write(u16 slave, u16 sub, u16 data) i2cinfo[i2c_count].data=data; i2c_count++; } - + if(skip) return 0; - + mvv_write(0x29, sub); mvv_write(0x2A, data); mvv_write(0x28, slave); - + outb(0x28, io_port); - + count=0; while((inb(data_port)&1)==0) if(count>255) @@ -165,9 +167,9 @@ static int pms_i2c_write(u16 slave, u16 sub, u16 data) while((inb(data_port)&1)!=0) if(count>255) break; - + count=inb(data_port); - + if(count&2) return -1; return count; @@ -187,8 +189,8 @@ static int pms_i2c_read(int slave, int sub) static void pms_i2c_andor(int slave, int sub, int and, int or) { - u8 tmp; - + u8 tmp; + tmp=pms_i2c_read(slave, sub); tmp = (tmp&and)|or; pms_i2c_write(slave, sub, tmp); @@ -197,7 +199,7 @@ static void pms_i2c_andor(int slave, int sub, int and, int or) /* * Control functions */ - + static void pms_videosource(short source) { @@ -232,8 +234,8 @@ static void pms_colour(short colour) break; } } - - + + static void pms_contrast(short contrast) { switch(decoder) @@ -267,14 +269,14 @@ static void pms_format(short format) { int target; standard = format; - + if(decoder==PHILIPS1) target=0x42; else if(decoder==PHILIPS2) target=0x8A; else return; - + switch(format) { case 0: /* Auto */ @@ -300,7 +302,7 @@ static void pms_format(short format) /* * These features of the PMS card are not currently exposes. They - * could become a private v4l ioctl for PMSCONFIG or somesuch if + * could become a private v4l ioctl for PMSCONFIG or somesuch if * people need it. We also don't yet use the PMS interrupt. */ @@ -322,7 +324,7 @@ static void pms_hstart(short start) /* * Bandpass filters */ - + static void pms_bandpass(short pass) { if(decoder==PHILIPS2) @@ -491,7 +493,7 @@ static void pms_vert(u8 deciden, u8 decinum) /* * Turn 16bit ratios into best small ratio the chipset can grok */ - + static void pms_vertdeci(unsigned short decinum, unsigned short deciden) { /* Knock it down by /5 once */ @@ -544,7 +546,7 @@ static void pms_horzdeci(short decinum, short deciden) decinum=512; deciden=640; /* 768 would be ideal */ } - + while(((decinum|deciden)&1)==0) { decinum>>=1; @@ -557,7 +559,7 @@ static void pms_horzdeci(short decinum, short deciden) } if(deciden==32) deciden--; - + mvv_write(0x24, 0x80|deciden); mvv_write(0x25, decinum); } @@ -565,14 +567,14 @@ static void pms_horzdeci(short decinum, short deciden) static void pms_resolution(short width, short height) { int fg_height; - + fg_height=height; if(fg_height>280) fg_height=280; - + mvv_write(0x18, fg_height); mvv_write(0x19, fg_height>>8); - + if(standard==1) { mvv_write(0x1A, 0xFC); @@ -596,7 +598,7 @@ static void pms_resolution(short width, short height) mvv_write(0x42, 0x00); mvv_write(0x43, 0x00); mvv_write(0x44, MVVMEMORYWIDTH); - + mvv_write(0x22, width+8); mvv_write(0x23, (width+8)>> 8); @@ -616,7 +618,7 @@ static void pms_resolution(short width, short height) /* * Set Input */ - + static void pms_vcrinput(short input) { if(decoder==PHILIPS2) @@ -641,20 +643,20 @@ static int pms_capture(struct pms_device *dev, char __user *buf, int rgb555, int mvv_write(0x08,r8); /* capture rgb555/565, init DRAM, PC enable */ /* printf("%d %d %d %d %d %x %x\n",width,height,voff,nom,den,mvv_buf); */ - - for (y = 0; y < dev->height; y++ ) + + for (y = 0; y < dev->height; y++ ) { writeb(0, mem); /* synchronisiert neue Zeile */ - + /* * This is in truth a fifo, be very careful as if you * forgot this odd things will occur 8) */ - + memcpy_fromio(tmp, mem, dw+32); /* discard 16 word */ cnt -= dev->height; - while (cnt <= 0) - { + while (cnt <= 0) + { /* * Don't copy too far */ @@ -664,7 +666,7 @@ static int pms_capture(struct pms_device *dev, char __user *buf, int rgb555, int cnt += dev->height; if (copy_to_user(buf, tmp+32, dt)) return len ? len : -EFAULT; - buf += dt; + buf += dt; len += dt; } } @@ -681,7 +683,7 @@ static int pms_do_ioctl(struct inode *inode, struct file *file, { struct video_device *dev = video_devdata(file); struct pms_device *pd=(struct pms_device *)dev; - + switch(cmd) { case VIDIOCGCAP: @@ -724,10 +726,10 @@ static int pms_do_ioctl(struct inode *inode, struct file *file, struct video_channel *v = arg; if(v->channel<0 || v->channel>3) return -EINVAL; - down(&pd->lock); + mutex_lock(&pd->lock); pms_videosource(v->channel&1); pms_vcrinput(v->channel>>1); - up(&pd->lock); + mutex_unlock(&pd->lock); return 0; } case VIDIOCGTUNER: @@ -761,7 +763,7 @@ static int pms_do_ioctl(struct inode *inode, struct file *file, struct video_tuner *v = arg; if(v->tuner) return -EINVAL; - down(&pd->lock); + mutex_lock(&pd->lock); switch(v->mode) { case VIDEO_MODE_AUTO: @@ -785,10 +787,10 @@ static int pms_do_ioctl(struct inode *inode, struct file *file, pms_format(2); break; default: - up(&pd->lock); + mutex_unlock(&pd->lock); return -EINVAL; } - up(&pd->lock); + mutex_unlock(&pd->lock); return 0; } case VIDIOCGPICT: @@ -804,17 +806,17 @@ static int pms_do_ioctl(struct inode *inode, struct file *file, ||(p->palette==VIDEO_PALETTE_RGB555 && p->depth==15))) return -EINVAL; pd->picture= *p; - + /* * Now load the card. */ - down(&pd->lock); + mutex_lock(&pd->lock); pms_brightness(p->brightness>>8); pms_hue(p->hue>>8); pms_colour(p->colour>>8); - pms_contrast(p->contrast>>8); - up(&pd->lock); + pms_contrast(p->contrast>>8); + mutex_unlock(&pd->lock); return 0; } case VIDIOCSWIN: @@ -830,9 +832,9 @@ static int pms_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; pd->width=vw->width; pd->height=vw->height; - down(&pd->lock); + mutex_lock(&pd->lock); pms_resolution(pd->width, pd->height); - up(&pd->lock); /* Ok we figured out what to use from our wide choice */ + mutex_unlock(&pd->lock); /* Ok we figured out what to use from our wide choice */ return 0; } case VIDIOCGWIN: @@ -871,10 +873,10 @@ static ssize_t pms_read(struct file *file, char __user *buf, struct video_device *v = video_devdata(file); struct pms_device *pd=(struct pms_device *)v; int len; - - down(&pd->lock); + + mutex_lock(&pd->lock); len=pms_capture(pd, buf, (pd->picture.depth==16)?0:1,count); - up(&pd->lock); + mutex_unlock(&pd->lock); return len; } @@ -903,13 +905,13 @@ static struct pms_device pms_device; /* * Probe for and initialise the Mediavision PMS */ - + static int init_mediavision(void) { int id; int idec, decst; int i; - + unsigned char i2c_defs[]={ 0x4C,0x30,0x00,0xE8, 0xB6,0xE2,0x00,0x00, @@ -923,7 +925,7 @@ static int init_mediavision(void) mem = ioremap(mem_base, 0x800); if (!mem) return -ENOMEM; - + if (!request_region(0x9A01, 1, "Mediavision PMS config")) { printk(KERN_WARNING "mediavision: unable to detect: 0x9A01 in use.\n"); @@ -939,18 +941,18 @@ static int init_mediavision(void) } outb(0xB8, 0x9A01); /* Unlock */ outb(io_port>>4, 0x9A01); /* Set IO port */ - - + + id=mvv_read(3); decst=pms_i2c_stat(0x43); - + if(decst!=-1) idec=2; else if(pms_i2c_stat(0xb9)!=-1) idec=3; else if(pms_i2c_stat(0x8b)!=-1) idec=1; - else + else idec=0; printk(KERN_INFO "PMS type is %d\n", idec); @@ -964,11 +966,11 @@ static int init_mediavision(void) /* * Ok we have a PMS of some sort */ - + mvv_write(0x04, mem_base>>12); /* Set the memory area */ - + /* Ok now load the defaults */ - + for(i=0;i<0x19;i++) { if(i2c_defs[i]==0xFF) @@ -976,7 +978,7 @@ static int init_mediavision(void) else pms_i2c_write(0x8A, i, i2c_defs[i]); } - + pms_i2c_write(0xB8,0x00,0x12); pms_i2c_write(0xB8,0x04,0x00); pms_i2c_write(0xB8,0x07,0x00); @@ -985,18 +987,18 @@ static int init_mediavision(void) pms_i2c_write(0xB8,0x0A,0x00); pms_i2c_write(0xB8,0x0B,0x10); pms_i2c_write(0xB8,0x10,0x03); - + mvv_write(0x01, 0x00); mvv_write(0x05, 0xA0); mvv_write(0x08, 0x25); mvv_write(0x09, 0x00); - mvv_write(0x0A, 0x20|MVVMEMORYWIDTH); - + mvv_write(0x0A, 0x20|MVVMEMORYWIDTH); + mvv_write(0x10, 0x02); mvv_write(0x1E, 0x0C); mvv_write(0x1F, 0x03); mvv_write(0x26, 0x06); - + mvv_write(0x2B, 0x00); mvv_write(0x2C, 0x20); mvv_write(0x2D, 0x00); @@ -1016,20 +1018,20 @@ static int init_mediavision(void) /* * Initialization and module stuff */ - + static int __init init_pms_cards(void) { printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n"); - + data_port = io_port +1; - + if(init_mediavision()) { printk(KERN_INFO "Board not found.\n"); return -ENODEV; } memcpy(&pms_device, &pms_template, sizeof(pms_template)); - init_MUTEX(&pms_device.lock); + mutex_init(&pms_device.lock); pms_device.height=240; pms_device.width=320; pms_swsense(75); diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile new file mode 100644 index 000000000000..8326684f49f3 --- /dev/null +++ b/drivers/media/video/pwc/Makefile @@ -0,0 +1,20 @@ +ifneq ($(KERNELRELEASE),) + +pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o + +obj-$(CONFIG_USB_PWC) += pwc.o + +else + +KDIR := /lib/modules/$(shell uname -r)/build +PWD := $(shell pwd) + +default: + $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules + +endif + +clean: + rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c + rm -rf .tmp_versions + diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt new file mode 100644 index 000000000000..11f751a6bda5 --- /dev/null +++ b/drivers/media/video/pwc/philips.txt @@ -0,0 +1,236 @@ +This file contains some additional information for the Philips and OEM webcams. +E-mail: webcam@smcc.demon.nl Last updated: 2004-01-19 +Site: http://www.smcc.demon.nl/webcam/ + +As of this moment, the following cameras are supported: + * Philips PCA645 + * Philips PCA646 + * Philips PCVC675 + * Philips PCVC680 + * Philips PCVC690 + * Philips PCVC720/40 + * Philips PCVC730 + * Philips PCVC740 + * Philips PCVC750 + * Askey VC010 + * Creative Labs Webcam 5 + * Creative Labs Webcam Pro Ex + * Logitech QuickCam 3000 Pro + * Logitech QuickCam 4000 Pro + * Logitech QuickCam Notebook Pro + * Logitech QuickCam Zoom + * Logitech QuickCam Orbit + * Logitech QuickCam Sphere + * Samsung MPC-C10 + * Samsung MPC-C30 + * Sotec Afina Eye + * AME CU-001 + * Visionite VCS-UM100 + * Visionite VCS-UC300 + +The main webpage for the Philips driver is at the address above. It contains +a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin +contains decompression routines that allow you to use higher image sizes and +framerates; in addition the webcam uses less bandwidth on the USB bus (handy +if you want to run more than 1 camera simultaneously). These routines fall +under a NDA, and may therefor not be distributed as source; however, its use +is completely optional. + +You can build this code either into your kernel, or as a module. I recommend +the latter, since it makes troubleshooting a lot easier. The built-in +microphone is supported through the USB Audio class. + +When you load the module you can set some default settings for the +camera; some programs depend on a particular image-size or -format and +don't know how to set it properly in the driver. The options are: + +size + Can be one of 'sqcif', 'qsif', 'qcif', 'sif', 'cif' or + 'vga', for an image size of resp. 128x96, 160x120, 176x144, + 320x240, 352x288 and 640x480 (of course, only for those cameras that + support these resolutions). + +fps + Specifies the desired framerate. Is an integer in the range of 4-30. + +fbufs + This paramter specifies the number of internal buffers to use for storing + frames from the cam. This will help if the process that reads images from + the cam is a bit slow or momentarely busy. However, on slow machines it + only introduces lag, so choose carefully. The default is 3, which is + reasonable. You can set it between 2 and 5. + +mbufs + This is an integer between 1 and 10. It will tell the module the number of + buffers to reserve for mmap(), VIDIOCCGMBUF, VIDIOCMCAPTURE and friends. + The default is 2, which is adequate for most applications (double + buffering). + + Should you experience a lot of 'Dumping frame...' messages during + grabbing with a tool that uses mmap(), you might want to increase if. + However, it doesn't really buffer images, it just gives you a bit more + slack when your program is behind. But you need a multi-threaded or + forked program to really take advantage of these buffers. + + The absolute maximum is 10, but don't set it too high! Every buffer takes + up 460 KB of RAM, so unless you have a lot of memory setting this to + something more than 4 is an absolute waste. This memory is only + allocated during open(), so nothing is wasted when the camera is not in + use. + +power_save + When power_save is enabled (set to 1), the module will try to shut down + the cam on close() and re-activate on open(). This will save power and + turn off the LED. Not all cameras support this though (the 645 and 646 + don't have power saving at all), and some models don't work either (they + will shut down, but never wake up). Consider this experimental. By + default this option is disabled. + +compression (only useful with the plugin) + With this option you can control the compression factor that the camera + uses to squeeze the image through the USB bus. You can set the + parameter between 0 and 3: + 0 = prefer uncompressed images; if the requested mode is not available + in an uncompressed format, the driver will silently switch to low + compression. + 1 = low compression. + 2 = medium compression. + 3 = high compression. + + High compression takes less bandwidth of course, but it could also + introduce some unwanted artefacts. The default is 2, medium compression. + See the FAQ on the website for an overview of which modes require + compression. + + The compression parameter does not apply to the 645 and 646 cameras + and OEM models derived from those (only a few). Most cams honour this + parameter. + +leds + This settings takes 2 integers, that define the on/off time for the LED + (in milliseconds). One of the interesting things that you can do with + this is let the LED blink while the camera is in use. This: + + leds=500,500 + + will blink the LED once every second. But with: + + leds=0,0 + + the LED never goes on, making it suitable for silent surveillance. + + By default the camera's LED is on solid while in use, and turned off + when the camera is not used anymore. + + This parameter works only with the ToUCam range of cameras (720, 730, 740, + 750) and OEMs. For other cameras this command is silently ignored, and + the LED cannot be controlled. + + Finally: this parameters does not take effect UNTIL the first time you + open the camera device. Until then, the LED remains on. + +dev_hint + A long standing problem with USB devices is their dynamic nature: you + never know what device a camera gets assigned; it depends on module load + order, the hub configuration, the order in which devices are plugged in, + and the phase of the moon (i.e. it can be random). With this option you + can give the driver a hint as to what video device node (/dev/videoX) it + should use with a specific camera. This is also handy if you have two + cameras of the same model. + + A camera is specified by its type (the number from the camera model, + like PCA645, PCVC750VC, etc) and optionally the serial number (visible + in /proc/bus/usb/devices). A hint consists of a string with the following + format: + + [type[.serialnumber]:]node + + The square brackets mean that both the type and the serialnumber are + optional, but a serialnumber cannot be specified without a type (which + would be rather pointless). The serialnumber is separated from the type + by a '.'; the node number by a ':'. + + This somewhat cryptic syntax is best explained by a few examples: + + dev_hint=3,5 The first detected cam gets assigned + /dev/video3, the second /dev/video5. Any + other cameras will get the first free + available slot (see below). + + dev_hint=645:1,680:2 The PCA645 camera will get /dev/video1, + and a PCVC680 /dev/video2. + + dev_hint=645.0123:3,645.4567:0 The PCA645 camera with serialnumber + 0123 goes to /dev/video3, the same + camera model with the 4567 serial + gets /dev/video0. + + dev_hint=750:1,4,5,6 The PCVC750 camera will get /dev/video1, the + next 3 Philips cams will use /dev/video4 + through /dev/video6. + + Some points worth knowing: + - Serialnumbers are case sensitive and must be written full, including + leading zeroes (it's treated as a string). + - If a device node is already occupied, registration will fail and + the webcam is not available. + - You can have up to 64 video devices; be sure to make enough device + nodes in /dev if you want to spread the numbers (this does not apply + to devfs). After /dev/video9 comes /dev/video10 (not /dev/videoA). + - If a camera does not match any dev_hint, it will simply get assigned + the first available device node, just as it used to be. + +trace + In order to better detect problems, it is now possible to turn on a + 'trace' of some of the calls the module makes; it logs all items in your + kernel log at debug level. + + The trace variable is a bitmask; each bit represents a certain feature. + If you want to trace something, look up the bit value(s) in the table + below, add the values together and supply that to the trace variable. + + Value Value Description Default + (dec) (hex) + 1 0x1 Module initialization; this will log messages On + while loading and unloading the module + + 2 0x2 probe() and disconnect() traces On + + 4 0x4 Trace open() and close() calls Off + + 8 0x8 read(), mmap() and associated ioctl() calls Off + + 16 0x10 Memory allocation of buffers, etc. Off + + 32 0x20 Showing underflow, overflow and Dumping frame On + messages + + 64 0x40 Show viewport and image sizes Off + + 128 0x80 PWCX debugging Off + + For example, to trace the open() & read() fuctions, sum 8 + 4 = 12, + so you would supply trace=12 during insmod or modprobe. If + you want to turn the initialization and probing tracing off, set trace=0. + The default value for trace is 35 (0x23). + + + +Example: + + # modprobe pwc size=cif fps=15 power_save=1 + +The fbufs, mbufs and trace parameters are global and apply to all connected +cameras. Each camera has its own set of buffers. + +size and fps only specify defaults when you open() the device; this is to +accommodate some tools that don't set the size. You can change these +settings after open() with the Video4Linux ioctl() calls. The default of +defaults is QCIF size at 10 fps. + +The compression parameter is semiglobal; it sets the initial compression +preference for all camera's, but this parameter can be set per camera with +the VIDIOCPWCSCQUAL ioctl() call. + +All parameters are optional. + diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c new file mode 100644 index 000000000000..4ba549bfa0e0 --- /dev/null +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -0,0 +1,1541 @@ +/* Driver for Philips webcam + Functions that send various control messages to the webcam, including + video modes. + (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* + Changes + 2001/08/03 Alvarado Added methods for changing white balance and + red/green gains + */ + +/* Control functions for the cam; brightness, contrast, video mode, etc. */ + +#ifdef __KERNEL__ +#include <asm/uaccess.h> +#endif +#include <asm/errno.h> + +#include "pwc.h" +#include "pwc-ioctl.h" +#include "pwc-uncompress.h" +#include "pwc-kiara.h" +#include "pwc-timon.h" + +/* Request types: video */ +#define SET_LUM_CTL 0x01 +#define GET_LUM_CTL 0x02 +#define SET_CHROM_CTL 0x03 +#define GET_CHROM_CTL 0x04 +#define SET_STATUS_CTL 0x05 +#define GET_STATUS_CTL 0x06 +#define SET_EP_STREAM_CTL 0x07 +#define GET_EP_STREAM_CTL 0x08 +#define SET_MPT_CTL 0x0D +#define GET_MPT_CTL 0x0E + +/* Selectors for the Luminance controls [GS]ET_LUM_CTL */ +#define AGC_MODE_FORMATTER 0x2000 +#define PRESET_AGC_FORMATTER 0x2100 +#define SHUTTER_MODE_FORMATTER 0x2200 +#define PRESET_SHUTTER_FORMATTER 0x2300 +#define PRESET_CONTOUR_FORMATTER 0x2400 +#define AUTO_CONTOUR_FORMATTER 0x2500 +#define BACK_LIGHT_COMPENSATION_FORMATTER 0x2600 +#define CONTRAST_FORMATTER 0x2700 +#define DYNAMIC_NOISE_CONTROL_FORMATTER 0x2800 +#define FLICKERLESS_MODE_FORMATTER 0x2900 +#define AE_CONTROL_SPEED 0x2A00 +#define BRIGHTNESS_FORMATTER 0x2B00 +#define GAMMA_FORMATTER 0x2C00 + +/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */ +#define WB_MODE_FORMATTER 0x1000 +#define AWB_CONTROL_SPEED_FORMATTER 0x1100 +#define AWB_CONTROL_DELAY_FORMATTER 0x1200 +#define PRESET_MANUAL_RED_GAIN_FORMATTER 0x1300 +#define PRESET_MANUAL_BLUE_GAIN_FORMATTER 0x1400 +#define COLOUR_MODE_FORMATTER 0x1500 +#define SATURATION_MODE_FORMATTER1 0x1600 +#define SATURATION_MODE_FORMATTER2 0x1700 + +/* Selectors for the Status controls [GS]ET_STATUS_CTL */ +#define SAVE_USER_DEFAULTS_FORMATTER 0x0200 +#define RESTORE_USER_DEFAULTS_FORMATTER 0x0300 +#define RESTORE_FACTORY_DEFAULTS_FORMATTER 0x0400 +#define READ_AGC_FORMATTER 0x0500 +#define READ_SHUTTER_FORMATTER 0x0600 +#define READ_RED_GAIN_FORMATTER 0x0700 +#define READ_BLUE_GAIN_FORMATTER 0x0800 +#define SENSOR_TYPE_FORMATTER1 0x0C00 +#define READ_RAW_Y_MEAN_FORMATTER 0x3100 +#define SET_POWER_SAVE_MODE_FORMATTER 0x3200 +#define MIRROR_IMAGE_FORMATTER 0x3300 +#define LED_FORMATTER 0x3400 +#define SENSOR_TYPE_FORMATTER2 0x3700 + +/* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */ +#define VIDEO_OUTPUT_CONTROL_FORMATTER 0x0100 + +/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */ +#define PT_RELATIVE_CONTROL_FORMATTER 0x01 +#define PT_RESET_CONTROL_FORMATTER 0x02 +#define PT_STATUS_FORMATTER 0x03 + +static const char *size2name[PSZ_MAX] = +{ + "subQCIF", + "QSIF", + "QCIF", + "SIF", + "CIF", + "VGA", +}; + +/********/ + +/* Entries for the Nala (645/646) camera; the Nala doesn't have compression + preferences, so you either get compressed or non-compressed streams. + + An alternate value of 0 means this mode is not available at all. + */ + +struct Nala_table_entry { + char alternate; /* USB alternate setting */ + int compressed; /* Compressed yes/no */ + + unsigned char mode[3]; /* precomputed mode table */ +}; + +static struct Nala_table_entry Nala_table[PSZ_MAX][8] = +{ +#include "pwc-nala.h" +}; + + +/****************************************************************************/ + + +#define SendControlMsg(request, value, buflen) \ + usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \ + request, \ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ + value, \ + pdev->vcinterface, \ + &buf, buflen, 500) + +#define RecvControlMsg(request, value, buflen) \ + usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \ + request, \ + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ + value, \ + pdev->vcinterface, \ + &buf, buflen, 500) + + +#if PWC_DEBUG +void pwc_hexdump(void *p, int len) +{ + int i; + unsigned char *s; + char buf[100], *d; + + s = (unsigned char *)p; + d = buf; + *d = '\0'; + Debug("Doing hexdump @ %p, %d bytes.\n", p, len); + for (i = 0; i < len; i++) { + d += sprintf(d, "%02X ", *s++); + if ((i & 0xF) == 0xF) { + Debug("%s\n", buf); + d = buf; + *d = '\0'; + } + } + if ((i & 0xF) != 0) + Debug("%s\n", buf); +} +#endif + +static inline int send_video_command(struct usb_device *udev, int index, void *buf, int buflen) +{ + return usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + SET_EP_STREAM_CTL, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + VIDEO_OUTPUT_CONTROL_FORMATTER, + index, + buf, buflen, 1000); +} + + + +static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) +{ + unsigned char buf[3]; + int ret, fps; + struct Nala_table_entry *pEntry; + int frames2frames[31] = + { /* closest match of framerate */ + 0, 0, 0, 0, 4, /* 0-4 */ + 5, 5, 7, 7, 10, /* 5-9 */ + 10, 10, 12, 12, 15, /* 10-14 */ + 15, 15, 15, 20, 20, /* 15-19 */ + 20, 20, 20, 24, 24, /* 20-24 */ + 24, 24, 24, 24, 24, /* 25-29 */ + 24 /* 30 */ + }; + int frames2table[31] = + { 0, 0, 0, 0, 0, /* 0-4 */ + 1, 1, 1, 2, 2, /* 5-9 */ + 3, 3, 4, 4, 4, /* 10-14 */ + 5, 5, 5, 5, 5, /* 15-19 */ + 6, 6, 6, 6, 7, /* 20-24 */ + 7, 7, 7, 7, 7, /* 25-29 */ + 7 /* 30 */ + }; + + if (size < 0 || size > PSZ_CIF || frames < 4 || frames > 25) + return -EINVAL; + frames = frames2frames[frames]; + fps = frames2table[frames]; + pEntry = &Nala_table[size][fps]; + if (pEntry->alternate == 0) + return -EINVAL; + + if (pEntry->compressed) + return -ENOENT; /* Not supported. */ + + memcpy(buf, pEntry->mode, 3); + ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3); + if (ret < 0) { + Debug("Failed to send video command... %d\n", ret); + return ret; + } + if (pEntry->compressed && pdev->vpalette != VIDEO_PALETTE_RAW) + { + switch(pdev->type) { + case 645: + case 646: +/* pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + break; + + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: +/* pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + break; + } + } + + pdev->cmd_len = 3; + memcpy(pdev->cmd_buf, buf, 3); + + /* Set various parameters */ + pdev->vframes = frames; + pdev->vsize = size; + pdev->valternate = pEntry->alternate; + pdev->image = pwc_image_sizes[size]; + pdev->frame_size = (pdev->image.x * pdev->image.y * 3) / 2; + if (pEntry->compressed) { + if (pdev->release < 5) { /* 4 fold compression */ + pdev->vbandlength = 528; + pdev->frame_size /= 4; + } + else { + pdev->vbandlength = 704; + pdev->frame_size /= 3; + } + } + else + pdev->vbandlength = 0; + return 0; +} + + +static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, int compression, int snapshot) +{ + unsigned char buf[13]; + const struct Timon_table_entry *pChoose; + int ret, fps; + + if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3) + return -EINVAL; + if (size == PSZ_VGA && frames > 15) + return -EINVAL; + fps = (frames / 5) - 1; + + /* Find a supported framerate with progressively higher compression ratios + if the preferred ratio is not available. + */ + pChoose = NULL; + while (compression <= 3) { + pChoose = &Timon_table[size][fps][compression]; + if (pChoose->alternate != 0) + break; + compression++; + } + if (pChoose == NULL || pChoose->alternate == 0) + return -ENOENT; /* Not supported. */ + + memcpy(buf, pChoose->mode, 13); + if (snapshot) + buf[0] |= 0x80; + ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13); + if (ret < 0) + return ret; + +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + + pdev->cmd_len = 13; + memcpy(pdev->cmd_buf, buf, 13); + + /* Set various parameters */ + pdev->vframes = frames; + pdev->vsize = size; + pdev->vsnapshot = snapshot; + pdev->valternate = pChoose->alternate; + pdev->image = pwc_image_sizes[size]; + pdev->vbandlength = pChoose->bandlength; + if (pChoose->bandlength > 0) + pdev->frame_size = (pChoose->bandlength * pdev->image.y) / 4; + else + pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8; + return 0; +} + + +static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, int compression, int snapshot) +{ + const struct Kiara_table_entry *pChoose = NULL; + int fps, ret; + unsigned char buf[12]; + struct Kiara_table_entry RawEntry = {6, 773, 1272, {0xAD, 0xF4, 0x10, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}}; + + if (size >= PSZ_MAX || frames < 5 || frames > 30 || compression < 0 || compression > 3) + return -EINVAL; + if (size == PSZ_VGA && frames > 15) + return -EINVAL; + fps = (frames / 5) - 1; + + /* special case: VGA @ 5 fps and snapshot is raw bayer mode */ + if (size == PSZ_VGA && frames == 5 && snapshot) + { + /* Only available in case the raw palette is selected or + we have the decompressor available. This mode is + only available in compressed form + */ + if (pdev->vpalette == VIDEO_PALETTE_RAW) + { + Info("Choosing VGA/5 BAYER mode (%d).\n", pdev->vpalette); + pChoose = &RawEntry; + } + else + { + Info("VGA/5 BAYER mode _must_ have a decompressor available, or use RAW palette.\n"); + } + } + else + { + /* Find a supported framerate with progressively higher compression ratios + if the preferred ratio is not available. + Skip this step when using RAW modes. + */ + while (compression <= 3) { + pChoose = &Kiara_table[size][fps][compression]; + if (pChoose->alternate != 0) + break; + compression++; + } + } + if (pChoose == NULL || pChoose->alternate == 0) + return -ENOENT; /* Not supported. */ + + Debug("Using alternate setting %d.\n", pChoose->alternate); + + /* usb_control_msg won't take staticly allocated arrays as argument?? */ + memcpy(buf, pChoose->mode, 12); + if (snapshot) + buf[0] |= 0x80; + + /* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */ + ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12); + if (ret < 0) + return ret; + +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ + + pdev->cmd_len = 12; + memcpy(pdev->cmd_buf, buf, 12); + /* All set and go */ + pdev->vframes = frames; + pdev->vsize = size; + pdev->vsnapshot = snapshot; + pdev->valternate = pChoose->alternate; + pdev->image = pwc_image_sizes[size]; + pdev->vbandlength = pChoose->bandlength; + if (pdev->vbandlength > 0) + pdev->frame_size = (pdev->vbandlength * pdev->image.y) / 4; + else + pdev->frame_size = (pdev->image.x * pdev->image.y * 12) / 8; + return 0; +} + + + +static void pwc_set_image_buffer_size(struct pwc_device *pdev) +{ + int i, factor = 0, filler = 0; + + /* for PALETTE_YUV420P */ + switch(pdev->vpalette) + { + case VIDEO_PALETTE_YUV420P: + factor = 6; + filler = 128; + break; + case VIDEO_PALETTE_RAW: + factor = 6; /* can be uncompressed YUV420P */ + filler = 0; + break; + } + + /* Set sizes in bytes */ + pdev->image.size = pdev->image.x * pdev->image.y * factor / 4; + pdev->view.size = pdev->view.x * pdev->view.y * factor / 4; + + /* Align offset, or you'll get some very weird results in + YUV420 mode... x must be multiple of 4 (to get the Y's in + place), and y even (or you'll mixup U & V). This is less of a + problem for YUV420P. + */ + pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC; + pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE; + + /* Fill buffers with gray or black */ + for (i = 0; i < MAX_IMAGES; i++) { + if (pdev->image_ptr[i] != NULL) + memset(pdev->image_ptr[i], filler, pdev->view.size); + } +} + + + +/** + @pdev: device structure + @width: viewport width + @height: viewport height + @frame: framerate, in fps + @compression: preferred compression ratio + @snapshot: snapshot mode or streaming + */ +int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot) +{ + int ret, size; + + Trace(TRACE_FLOW, "set_video_mode(%dx%d @ %d, palette %d).\n", width, height, frames, pdev->vpalette); + size = pwc_decode_size(pdev, width, height); + if (size < 0) { + Debug("Could not find suitable size.\n"); + return -ERANGE; + } + Debug("decode_size = %d.\n", size); + + ret = -EINVAL; + switch(pdev->type) { + case 645: + case 646: + ret = set_video_mode_Nala(pdev, size, frames); + break; + + case 675: + case 680: + case 690: + ret = set_video_mode_Timon(pdev, size, frames, compression, snapshot); + break; + + case 720: + case 730: + case 740: + case 750: + ret = set_video_mode_Kiara(pdev, size, frames, compression, snapshot); + break; + } + if (ret < 0) { + if (ret == -ENOENT) + Info("Video mode %s@%d fps is only supported with the decompressor module (pwcx).\n", size2name[size], frames); + else { + Err("Failed to set video mode %s@%d fps; return code = %d\n", size2name[size], frames, ret); + } + return ret; + } + pdev->view.x = width; + pdev->view.y = height; + pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size; + pwc_set_image_buffer_size(pdev); + Trace(TRACE_SIZE, "Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y); + return 0; +} + + +/* BRIGHTNESS */ + +int pwc_get_brightness(struct pwc_device *pdev) +{ + char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); + if (ret < 0) + return ret; + return buf << 9; +} + +int pwc_set_brightness(struct pwc_device *pdev, int value) +{ + char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 9) & 0x7f; + return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); +} + +/* CONTRAST */ + +int pwc_get_contrast(struct pwc_device *pdev) +{ + char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1); + if (ret < 0) + return ret; + return buf << 10; +} + +int pwc_set_contrast(struct pwc_device *pdev, int value) +{ + char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 10) & 0x3f; + return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1); +} + +/* GAMMA */ + +int pwc_get_gamma(struct pwc_device *pdev) +{ + char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1); + if (ret < 0) + return ret; + return buf << 11; +} + +int pwc_set_gamma(struct pwc_device *pdev, int value) +{ + char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 11) & 0x1f; + return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1); +} + + +/* SATURATION */ + +int pwc_get_saturation(struct pwc_device *pdev) +{ + char buf; + int ret; + + if (pdev->type < 675) + return -1; + ret = RecvControlMsg(GET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1); + if (ret < 0) + return ret; + return 32768 + buf * 327; +} + +int pwc_set_saturation(struct pwc_device *pdev, int value) +{ + char buf; + + if (pdev->type < 675) + return -EINVAL; + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + /* saturation ranges from -100 to +100 */ + buf = (value - 32768) / 327; + return SendControlMsg(SET_CHROM_CTL, pdev->type < 730 ? SATURATION_MODE_FORMATTER2 : SATURATION_MODE_FORMATTER1, 1); +} + +/* AGC */ + +static inline int pwc_set_agc(struct pwc_device *pdev, int mode, int value) +{ + char buf; + int ret; + + if (mode) + buf = 0x0; /* auto */ + else + buf = 0xff; /* fixed */ + + ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1); + + if (!mode && ret >= 0) { + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + buf = (value >> 10) & 0x3F; + ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + } + if (ret < 0) + return ret; + return 0; +} + +static inline int pwc_get_agc(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1); + if (ret < 0) + return ret; + + if (buf != 0) { /* fixed */ + ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + if (ret < 0) + return ret; + if (buf > 0x3F) + buf = 0x3F; + *value = (buf << 10); + } + else { /* auto */ + ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1); + if (ret < 0) + return ret; + /* Gah... this value ranges from 0x00 ... 0x9F */ + if (buf > 0x9F) + buf = 0x9F; + *value = -(48 + buf * 409); + } + + return 0; +} + +static inline int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) +{ + char buf[2]; + int speed, ret; + + + if (mode) + buf[0] = 0x0; /* auto */ + else + buf[0] = 0xff; /* fixed */ + + ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1); + + if (!mode && ret >= 0) { + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + switch(pdev->type) { + case 675: + case 680: + case 690: + /* speed ranges from 0x0 to 0x290 (656) */ + speed = (value / 100); + buf[1] = speed >> 8; + buf[0] = speed & 0xff; + break; + case 720: + case 730: + case 740: + case 750: + /* speed seems to range from 0x0 to 0xff */ + buf[1] = 0; + buf[0] = value >> 8; + break; + } + + ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2); + } + return ret; +} + + +/* POWER */ + +int pwc_camera_power(struct pwc_device *pdev, int power) +{ + char buf; + + if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6)) + return 0; /* Not supported by Nala or Timon < release 6 */ + + if (power) + buf = 0x00; /* active */ + else + buf = 0xFF; /* power save */ + return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1); +} + + + +/* private calls */ + +static inline int pwc_restore_user(struct pwc_device *pdev) +{ + char buf; /* dummy */ + return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0); +} + +static inline int pwc_save_user(struct pwc_device *pdev) +{ + char buf; /* dummy */ + return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0); +} + +static inline int pwc_restore_factory(struct pwc_device *pdev) +{ + char buf; /* dummy */ + return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0); +} + + /* ************************************************* */ + /* Patch by Alvarado: (not in the original version */ + + /* + * the camera recognizes modes from 0 to 4: + * + * 00: indoor (incandescant lighting) + * 01: outdoor (sunlight) + * 02: fluorescent lighting + * 03: manual + * 04: auto + */ +static inline int pwc_set_awb(struct pwc_device *pdev, int mode) +{ + char buf; + int ret; + + if (mode < 0) + mode = 0; + + if (mode > 4) + mode = 4; + + buf = mode & 0x07; /* just the lowest three bits */ + + ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1); + + if (ret < 0) + return ret; + return 0; +} + +static inline int pwc_get_awb(struct pwc_device *pdev) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1); + + if (ret < 0) + return ret; + return buf; +} + +static inline int pwc_set_red_gain(struct pwc_device *pdev, int value) +{ + unsigned char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + /* only the msb is considered */ + buf = value >> 8; + return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); +} + +static inline int pwc_get_red_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + + +static inline int pwc_set_blue_gain(struct pwc_device *pdev, int value) +{ + unsigned char buf; + + if (value < 0) + value = 0; + if (value > 0xffff) + value = 0xffff; + /* only the msb is considered */ + buf = value >> 8; + return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); +} + +static inline int pwc_get_blue_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + + +/* The following two functions are different, since they only read the + internal red/blue gains, which may be different from the manual + gains set or read above. + */ +static inline int pwc_read_red_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + +static inline int pwc_read_blue_gain(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 8; + return 0; +} + + +static inline int pwc_set_wb_speed(struct pwc_device *pdev, int speed) +{ + unsigned char buf; + + /* useful range is 0x01..0x20 */ + buf = speed / 0x7f0; + return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); +} + +static inline int pwc_get_wb_speed(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf * 0x7f0; + return 0; +} + + +static inline int pwc_set_wb_delay(struct pwc_device *pdev, int delay) +{ + unsigned char buf; + + /* useful range is 0x01..0x3F */ + buf = (delay >> 10); + return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); +} + +static inline int pwc_get_wb_delay(struct pwc_device *pdev, int *value) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); + if (ret < 0) + return ret; + *value = buf << 10; + return 0; +} + + +int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) +{ + unsigned char buf[2]; + + if (pdev->type < 730) + return 0; + on_value /= 100; + off_value /= 100; + if (on_value < 0) + on_value = 0; + if (on_value > 0xff) + on_value = 0xff; + if (off_value < 0) + off_value = 0; + if (off_value > 0xff) + off_value = 0xff; + + buf[0] = on_value; + buf[1] = off_value; + + return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2); +} + +static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) +{ + unsigned char buf[2]; + int ret; + + if (pdev->type < 730) { + *on_value = -1; + *off_value = -1; + return 0; + } + + ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2); + if (ret < 0) + return ret; + *on_value = buf[0] * 100; + *off_value = buf[1] * 100; + return 0; +} + +static inline int pwc_set_contour(struct pwc_device *pdev, int contour) +{ + unsigned char buf; + int ret; + + if (contour < 0) + buf = 0xff; /* auto contour on */ + else + buf = 0x0; /* auto contour off */ + ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + + if (contour < 0) + return 0; + if (contour > 0xffff) + contour = 0xffff; + + buf = (contour >> 10); /* contour preset is [0..3f] */ + ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + return 0; +} + +static inline int pwc_get_contour(struct pwc_device *pdev, int *contour) +{ + unsigned char buf; + int ret; + + ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + + if (buf == 0) { + /* auto mode off, query current preset value */ + ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + if (ret < 0) + return ret; + *contour = buf << 10; + } + else + *contour = -1; + return 0; +} + + +static inline int pwc_set_backlight(struct pwc_device *pdev, int backlight) +{ + unsigned char buf; + + if (backlight) + buf = 0xff; + else + buf = 0x0; + return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); +} + +static inline int pwc_get_backlight(struct pwc_device *pdev, int *backlight) +{ + int ret; + unsigned char buf; + + ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); + if (ret < 0) + return ret; + *backlight = buf; + return 0; +} + + +static inline int pwc_set_flicker(struct pwc_device *pdev, int flicker) +{ + unsigned char buf; + + if (flicker) + buf = 0xff; + else + buf = 0x0; + return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); +} + +static inline int pwc_get_flicker(struct pwc_device *pdev, int *flicker) +{ + int ret; + unsigned char buf; + + ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); + if (ret < 0) + return ret; + *flicker = buf; + return 0; +} + + +static inline int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise) +{ + unsigned char buf; + + if (noise < 0) + noise = 0; + if (noise > 3) + noise = 3; + buf = noise; + return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); +} + +static inline int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) +{ + int ret; + unsigned char buf; + + ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); + if (ret < 0) + return ret; + *noise = buf; + return 0; +} + +static int pwc_mpt_reset(struct pwc_device *pdev, int flags) +{ + unsigned char buf; + + buf = flags & 0x03; // only lower two bits are currently used + return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1); +} + +static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) +{ + unsigned char buf[4]; + + /* set new relative angle; angles are expressed in degrees * 100, + but cam as .5 degree resolution, hence divide by 200. Also + the angle must be multiplied by 64 before it's send to + the cam (??) + */ + pan = 64 * pan / 100; + tilt = -64 * tilt / 100; /* positive tilt is down, which is not what the user would expect */ + buf[0] = pan & 0xFF; + buf[1] = (pan >> 8) & 0xFF; + buf[2] = tilt & 0xFF; + buf[3] = (tilt >> 8) & 0xFF; + return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4); +} + +static inline int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *status) +{ + int ret; + unsigned char buf[5]; + + ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5); + if (ret < 0) + return ret; + status->status = buf[0] & 0x7; // 3 bits are used for reporting + status->time_pan = (buf[1] << 8) + buf[2]; + status->time_tilt = (buf[3] << 8) + buf[4]; + return 0; +} + + +int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) +{ + unsigned char buf; + int ret = -1, request; + + if (pdev->type < 675) + request = SENSOR_TYPE_FORMATTER1; + else if (pdev->type < 730) + return -1; /* The Vesta series doesn't have this call */ + else + request = SENSOR_TYPE_FORMATTER2; + + ret = RecvControlMsg(GET_STATUS_CTL, request, 1); + if (ret < 0) + return ret; + if (pdev->type < 675) + *sensor = buf | 0x100; + else + *sensor = buf; + return 0; +} + + + /* End of Add-Ons */ + /* ************************************************* */ + + +int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) +{ + int ret = 0; + + switch(cmd) { + case VIDIOCPWCRUSER: + { + if (pwc_restore_user(pdev)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCSUSER: + { + if (pwc_save_user(pdev)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCFACTORY: + { + if (pwc_restore_factory(pdev)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCSCQUAL: + { + int *qual = arg; + + if (*qual < 0 || *qual > 3) + ret = -EINVAL; + else + ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot); + if (ret >= 0) + pdev->vcompression = *qual; + break; + } + + case VIDIOCPWCGCQUAL: + { + int *qual = arg; + *qual = pdev->vcompression; + break; + } + + case VIDIOCPWCPROBE: + { + struct pwc_probe *probe = arg; + strcpy(probe->name, pdev->vdev->name); + probe->type = pdev->type; + break; + } + + case VIDIOCPWCGSERIAL: + { + struct pwc_serial *serial = arg; + strcpy(serial->serial, pdev->serial); + break; + } + + case VIDIOCPWCSAGC: + { + int *agc = arg; + if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCGAGC: + { + int *agc = arg; + + if (pwc_get_agc(pdev, agc)) + ret = -EINVAL; + break; + } + + case VIDIOCPWCSSHUTTER: + { + int *shutter_speed = arg; + ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed); + break; + } + + case VIDIOCPWCSAWB: + { + struct pwc_whitebalance *wb = arg; + + ret = pwc_set_awb(pdev, wb->mode); + if (ret >= 0 && wb->mode == PWC_WB_MANUAL) { + pwc_set_red_gain(pdev, wb->manual_red); + pwc_set_blue_gain(pdev, wb->manual_blue); + } + break; + } + + case VIDIOCPWCGAWB: + { + struct pwc_whitebalance *wb = arg; + + memset(wb, 0, sizeof(struct pwc_whitebalance)); + wb->mode = pwc_get_awb(pdev); + if (wb->mode < 0) + ret = -EINVAL; + else { + if (wb->mode == PWC_WB_MANUAL) { + ret = pwc_get_red_gain(pdev, &wb->manual_red); + if (ret < 0) + break; + ret = pwc_get_blue_gain(pdev, &wb->manual_blue); + if (ret < 0) + break; + } + if (wb->mode == PWC_WB_AUTO) { + ret = pwc_read_red_gain(pdev, &wb->read_red); + if (ret < 0) + break; + ret = pwc_read_blue_gain(pdev, &wb->read_blue); + if (ret < 0) + break; + } + } + break; + } + + case VIDIOCPWCSAWBSPEED: + { + struct pwc_wb_speed *wbs = arg; + + if (wbs->control_speed > 0) { + ret = pwc_set_wb_speed(pdev, wbs->control_speed); + } + if (wbs->control_delay > 0) { + ret = pwc_set_wb_delay(pdev, wbs->control_delay); + } + break; + } + + case VIDIOCPWCGAWBSPEED: + { + struct pwc_wb_speed *wbs = arg; + + ret = pwc_get_wb_speed(pdev, &wbs->control_speed); + if (ret < 0) + break; + ret = pwc_get_wb_delay(pdev, &wbs->control_delay); + if (ret < 0) + break; + break; + } + + case VIDIOCPWCSLED: + { + struct pwc_leds *leds = arg; + ret = pwc_set_leds(pdev, leds->led_on, leds->led_off); + break; + } + + + case VIDIOCPWCGLED: + { + struct pwc_leds *leds = arg; + ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off); + break; + } + + case VIDIOCPWCSCONTOUR: + { + int *contour = arg; + ret = pwc_set_contour(pdev, *contour); + break; + } + + case VIDIOCPWCGCONTOUR: + { + int *contour = arg; + ret = pwc_get_contour(pdev, contour); + break; + } + + case VIDIOCPWCSBACKLIGHT: + { + int *backlight = arg; + ret = pwc_set_backlight(pdev, *backlight); + break; + } + + case VIDIOCPWCGBACKLIGHT: + { + int *backlight = arg; + ret = pwc_get_backlight(pdev, backlight); + break; + } + + case VIDIOCPWCSFLICKER: + { + int *flicker = arg; + ret = pwc_set_flicker(pdev, *flicker); + break; + } + + case VIDIOCPWCGFLICKER: + { + int *flicker = arg; + ret = pwc_get_flicker(pdev, flicker); + break; + } + + case VIDIOCPWCSDYNNOISE: + { + int *dynnoise = arg; + ret = pwc_set_dynamic_noise(pdev, *dynnoise); + break; + } + + case VIDIOCPWCGDYNNOISE: + { + int *dynnoise = arg; + ret = pwc_get_dynamic_noise(pdev, dynnoise); + break; + } + + case VIDIOCPWCGREALSIZE: + { + struct pwc_imagesize *size = arg; + size->width = pdev->image.x; + size->height = pdev->image.y; + break; + } + + case VIDIOCPWCMPTRESET: + { + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + int *flags = arg; + + ret = pwc_mpt_reset(pdev, *flags); + if (ret >= 0) + { + pdev->pan_angle = 0; + pdev->tilt_angle = 0; + } + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTGRANGE: + { + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_range *range = arg; + *range = pdev->angle_range; + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTSANGLE: + { + int new_pan, new_tilt; + + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_angles *angles = arg; + /* The camera can only set relative angles, so + do some calculations when getting an absolute angle . + */ + if (angles->absolute) + { + new_pan = angles->pan; + new_tilt = angles->tilt; + } + else + { + new_pan = pdev->pan_angle + angles->pan; + new_tilt = pdev->tilt_angle + angles->tilt; + } + /* check absolute ranges */ + if (new_pan < pdev->angle_range.pan_min || + new_pan > pdev->angle_range.pan_max || + new_tilt < pdev->angle_range.tilt_min || + new_tilt > pdev->angle_range.tilt_max) + { + ret = -ERANGE; + } + else + { + /* go to relative range, check again */ + new_pan -= pdev->pan_angle; + new_tilt -= pdev->tilt_angle; + /* angles are specified in degrees * 100, thus the limit = 36000 */ + if (new_pan < -36000 || new_pan > 36000 || new_tilt < -36000 || new_tilt > 36000) + ret = -ERANGE; + } + if (ret == 0) /* no errors so far */ + { + ret = pwc_mpt_set_angle(pdev, new_pan, new_tilt); + if (ret >= 0) + { + pdev->pan_angle += new_pan; + pdev->tilt_angle += new_tilt; + } + if (ret == -EPIPE) /* stall -> out of range */ + ret = -ERANGE; + } + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTGANGLE: + { + + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_angles *angles = arg; + + angles->absolute = 1; + angles->pan = pdev->pan_angle; + angles->tilt = pdev->tilt_angle; + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCMPTSTATUS: + { + if (pdev->features & FEATURE_MOTOR_PANTILT) + { + struct pwc_mpt_status *status = arg; + ret = pwc_mpt_get_status(pdev, status); + } + else + { + ret = -ENXIO; + } + break; + } + + case VIDIOCPWCGVIDCMD: + { + struct pwc_video_command *cmd = arg; + + cmd->type = pdev->type; + cmd->release = pdev->release; + cmd->command_len = pdev->cmd_len; + memcpy(&cmd->command_buf, pdev->cmd_buf, pdev->cmd_len); + cmd->bandlength = pdev->vbandlength; + cmd->frame_size = pdev->frame_size; + break; + } + /* + case VIDIOCPWCGVIDTABLE: + { + struct pwc_table_init_buffer *table = arg; + table->len = pdev->cmd_len; + memcpy(&table->buffer, pdev->decompress_data, pdev->decompressor->table_size); + break; + } + */ + + default: + ret = -ENOIOCTLCMD; + break; + } + + if (ret > 0) + return 0; + return ret; +} + + + diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c new file mode 100644 index 000000000000..41418294a32b --- /dev/null +++ b/drivers/media/video/pwc/pwc-if.c @@ -0,0 +1,2205 @@ +/* Linux driver for Philips webcam + USB and Video4Linux interface part. + (C) 1999-2004 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +*/ + +/* + This code forms the interface between the USB layers and the Philips + specific stuff. Some adanved stuff of the driver falls under an + NDA, signed between me and Philips B.V., Eindhoven, the Netherlands, and + is thus not distributed in source form. The binary pwcx.o module + contains the code that falls under the NDA. + + In case you're wondering: 'pwc' stands for "Philips WebCam", but + I really didn't want to type 'philips_web_cam' every time (I'm lazy as + any Linux kernel hacker, but I don't like uncomprehensible abbreviations + without explanation). + + Oh yes, convention: to disctinguish between all the various pointers to + device-structures, I use these names for the pointer variables: + udev: struct usb_device * + vdev: struct video_device * + pdev: struct pwc_devive * +*/ + +/* Contributors: + - Alvarado: adding whitebalance code + - Alistar Moire: QuickCam 3000 Pro device/product ID + - Tony Hoyle: Creative Labs Webcam 5 device/product ID + - Mark Burazin: solving hang in VIDIOCSYNC when camera gets unplugged + - Jk Fang: Sotec Afina Eye ID + - Xavier Roche: QuickCam Pro 4000 ID + - Jens Knudsen: QuickCam Zoom ID + - J. Debert: QuickCam for Notebooks ID +*/ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/poll.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <asm/io.h> + +#include "pwc.h" +#include "pwc-ioctl.h" +#include "pwc-kiara.h" +#include "pwc-timon.h" +#include "pwc-uncompress.h" + +/* Function prototypes and driver templates */ + +/* hotplug device table support */ +static struct usb_device_id pwc_device_table [] = { + { USB_DEVICE(0x0471, 0x0302) }, /* Philips models */ + { USB_DEVICE(0x0471, 0x0303) }, + { USB_DEVICE(0x0471, 0x0304) }, + { USB_DEVICE(0x0471, 0x0307) }, + { USB_DEVICE(0x0471, 0x0308) }, + { USB_DEVICE(0x0471, 0x030C) }, + { USB_DEVICE(0x0471, 0x0310) }, + { USB_DEVICE(0x0471, 0x0311) }, + { USB_DEVICE(0x0471, 0x0312) }, + { USB_DEVICE(0x0471, 0x0313) }, /* the 'new' 720K */ + { USB_DEVICE(0x069A, 0x0001) }, /* Askey */ + { USB_DEVICE(0x046D, 0x08B0) }, /* Logitech QuickCam Pro 3000 */ + { USB_DEVICE(0x046D, 0x08B1) }, /* Logitech QuickCam Notebook Pro */ + { USB_DEVICE(0x046D, 0x08B2) }, /* Logitech QuickCam Pro 4000 */ + { USB_DEVICE(0x046D, 0x08B3) }, /* Logitech QuickCam Zoom (old model) */ + { USB_DEVICE(0x046D, 0x08B4) }, /* Logitech QuickCam Zoom (new model) */ + { USB_DEVICE(0x046D, 0x08B5) }, /* Logitech QuickCam Orbit/Sphere */ + { USB_DEVICE(0x046D, 0x08B6) }, /* Logitech (reserved) */ + { USB_DEVICE(0x046D, 0x08B7) }, /* Logitech (reserved) */ + { USB_DEVICE(0x046D, 0x08B8) }, /* Logitech (reserved) */ + { USB_DEVICE(0x055D, 0x9000) }, /* Samsung */ + { USB_DEVICE(0x055D, 0x9001) }, + { USB_DEVICE(0x041E, 0x400C) }, /* Creative Webcam 5 */ + { USB_DEVICE(0x041E, 0x4011) }, /* Creative Webcam Pro Ex */ + { USB_DEVICE(0x04CC, 0x8116) }, /* Afina Eye */ + { USB_DEVICE(0x06BE, 0x8116) }, /* new Afina Eye */ + { USB_DEVICE(0x0d81, 0x1910) }, /* Visionite */ + { USB_DEVICE(0x0d81, 0x1900) }, + { } +}; +MODULE_DEVICE_TABLE(usb, pwc_device_table); + +static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id); +static void usb_pwc_disconnect(struct usb_interface *intf); + +static struct usb_driver pwc_driver = { + .name = "Philips webcam", /* name */ + .id_table = pwc_device_table, + .probe = usb_pwc_probe, /* probe() */ + .disconnect = usb_pwc_disconnect, /* disconnect() */ +}; + +#define MAX_DEV_HINTS 20 +#define MAX_ISOC_ERRORS 20 + +static int default_size = PSZ_QCIF; +static int default_fps = 10; +static int default_fbufs = 3; /* Default number of frame buffers */ +static int default_mbufs = 2; /* Default number of mmap() buffers */ + int pwc_trace = TRACE_MODULE | TRACE_FLOW | TRACE_PWCX; +static int power_save = 0; +static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */ +static int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */ +static struct { + int type; + char serial_number[30]; + int device_node; + struct pwc_device *pdev; +} device_hint[MAX_DEV_HINTS]; + +/***/ + +static int pwc_video_open(struct inode *inode, struct file *file); +static int pwc_video_close(struct inode *inode, struct file *file); +static ssize_t pwc_video_read(struct file *file, char __user * buf, + size_t count, loff_t *ppos); +static unsigned int pwc_video_poll(struct file *file, poll_table *wait); +static int pwc_video_ioctl(struct inode *inode, struct file *file, + unsigned int ioctlnr, unsigned long arg); +static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma); + +static struct file_operations pwc_fops = { + .owner = THIS_MODULE, + .open = pwc_video_open, + .release = pwc_video_close, + .read = pwc_video_read, + .poll = pwc_video_poll, + .mmap = pwc_video_mmap, + .ioctl = pwc_video_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static struct video_device pwc_template = { + .owner = THIS_MODULE, + .name = "Philips Webcam", /* Filled in later */ + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_PWC, + .release = video_device_release, + .fops = &pwc_fops, + .minor = -1, +}; + +/***************************************************************************/ + +/* Okay, this is some magic that I worked out and the reasoning behind it... + + The biggest problem with any USB device is of course: "what to do + when the user unplugs the device while it is in use by an application?" + We have several options: + 1) Curse them with the 7 plagues when they do (requires divine intervention) + 2) Tell them not to (won't work: they'll do it anyway) + 3) Oops the kernel (this will have a negative effect on a user's uptime) + 4) Do something sensible. + + Of course, we go for option 4. + + It happens that this device will be linked to two times, once from + usb_device and once from the video_device in their respective 'private' + pointers. This is done when the device is probed() and all initialization + succeeded. The pwc_device struct links back to both structures. + + When a device is unplugged while in use it will be removed from the + list of known USB devices; I also de-register it as a V4L device, but + unfortunately I can't free the memory since the struct is still in use + by the file descriptor. This free-ing is then deferend until the first + opportunity. Crude, but it works. + + A small 'advantage' is that if a user unplugs the cam and plugs it back + in, it should get assigned the same video device minor, but unfortunately + it's non-trivial to re-link the cam back to the video device... (that + would surely be magic! :)) +*/ + +/***************************************************************************/ +/* Private functions */ + +/* Here we want the physical address of the memory. + * This is used when initializing the contents of the area. + */ +static inline unsigned long kvirt_to_pa(unsigned long adr) +{ + unsigned long kva, ret; + + kva = (unsigned long) page_address(vmalloc_to_page((void *)adr)); + kva |= adr & (PAGE_SIZE-1); /* restore the offset */ + ret = __pa(kva); + return ret; +} + +static void * rvmalloc(unsigned long size) +{ + void * mem; + unsigned long adr; + + size=PAGE_ALIGN(size); + mem=vmalloc_32(size); + if (mem) + { + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr=(unsigned long) mem; + while (size > 0) + { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr+=PAGE_SIZE; + size-=PAGE_SIZE; + } + } + return mem; +} + +static void rvfree(void * mem, unsigned long size) +{ + unsigned long adr; + + if (mem) + { + adr=(unsigned long) mem; + while ((long) size > 0) + { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr+=PAGE_SIZE; + size-=PAGE_SIZE; + } + vfree(mem); + } +} + + + + +static int pwc_allocate_buffers(struct pwc_device *pdev) +{ + int i; + void *kbuf; + + Trace(TRACE_MEMORY, ">> pwc_allocate_buffers(pdev = 0x%p)\n", pdev); + + if (pdev == NULL) + return -ENXIO; + +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("allocate_buffers(): magic failed.\n"); + return -ENXIO; + } +#endif + /* Allocate Isochronous pipe buffers */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + if (pdev->sbuf[i].data == NULL) { + kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL); + if (kbuf == NULL) { + Err("Failed to allocate iso buffer %d.\n", i); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated iso buffer at %p.\n", kbuf); + pdev->sbuf[i].data = kbuf; + memset(kbuf, 0, ISO_BUFFER_SIZE); + } + } + + /* Allocate frame buffer structure */ + if (pdev->fbuf == NULL) { + kbuf = kmalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL); + if (kbuf == NULL) { + Err("Failed to allocate frame buffer structure.\n"); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated frame buffer structure at %p.\n", kbuf); + pdev->fbuf = kbuf; + memset(kbuf, 0, default_fbufs * sizeof(struct pwc_frame_buf)); + } + /* create frame buffers, and make circular ring */ + for (i = 0; i < default_fbufs; i++) { + if (pdev->fbuf[i].data == NULL) { + kbuf = vmalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */ + if (kbuf == NULL) { + Err("Failed to allocate frame buffer %d.\n", i); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated frame buffer %d at %p.\n", i, kbuf); + pdev->fbuf[i].data = kbuf; + memset(kbuf, 128, PWC_FRAME_SIZE); + } + } + + /* Allocate decompressor table space */ + kbuf = NULL; + switch (pdev->type) + { + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: +#if 0 + Trace(TRACE_MEMORY,"private_data(%zu)\n",sizeof(struct pwc_dec23_private)); + kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); /* Timon & Kiara */ + break; + case 645: + case 646: + /* TODO & FIXME */ + kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); + break; +#endif + ; + } + pdev->decompress_data = kbuf; + + /* Allocate image buffer; double buffer for mmap() */ + kbuf = rvmalloc(default_mbufs * pdev->len_per_image); + if (kbuf == NULL) { + Err("Failed to allocate image buffer(s). needed (%d)\n",default_mbufs * pdev->len_per_image); + return -ENOMEM; + } + Trace(TRACE_MEMORY, "Allocated image buffer at %p.\n", kbuf); + pdev->image_data = kbuf; + for (i = 0; i < default_mbufs; i++) + pdev->image_ptr[i] = kbuf + i * pdev->len_per_image; + for (; i < MAX_IMAGES; i++) + pdev->image_ptr[i] = NULL; + + kbuf = NULL; + + Trace(TRACE_MEMORY, "<< pwc_allocate_buffers()\n"); + return 0; +} + +static void pwc_free_buffers(struct pwc_device *pdev) +{ + int i; + + Trace(TRACE_MEMORY, "Entering free_buffers(%p).\n", pdev); + + if (pdev == NULL) + return; +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("free_buffers(): magic failed.\n"); + return; + } +#endif + + /* Release Iso-pipe buffers */ + for (i = 0; i < MAX_ISO_BUFS; i++) + if (pdev->sbuf[i].data != NULL) { + Trace(TRACE_MEMORY, "Freeing ISO buffer at %p.\n", pdev->sbuf[i].data); + kfree(pdev->sbuf[i].data); + pdev->sbuf[i].data = NULL; + } + + /* The same for frame buffers */ + if (pdev->fbuf != NULL) { + for (i = 0; i < default_fbufs; i++) { + if (pdev->fbuf[i].data != NULL) { + Trace(TRACE_MEMORY, "Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data); + vfree(pdev->fbuf[i].data); + pdev->fbuf[i].data = NULL; + } + } + kfree(pdev->fbuf); + pdev->fbuf = NULL; + } + + /* Intermediate decompression buffer & tables */ + if (pdev->decompress_data != NULL) { + Trace(TRACE_MEMORY, "Freeing decompression buffer at %p.\n", pdev->decompress_data); + kfree(pdev->decompress_data); + pdev->decompress_data = NULL; + } + pdev->decompressor = NULL; + + /* Release image buffers */ + if (pdev->image_data != NULL) { + Trace(TRACE_MEMORY, "Freeing image buffer at %p.\n", pdev->image_data); + rvfree(pdev->image_data, default_mbufs * pdev->len_per_image); + } + pdev->image_data = NULL; + + Trace(TRACE_MEMORY, "Leaving free_buffers().\n"); +} + +/* The frame & image buffer mess. + + Yes, this is a mess. Well, it used to be simple, but alas... In this + module, 3 buffers schemes are used to get the data from the USB bus to + the user program. The first scheme involves the ISO buffers (called thus + since they transport ISO data from the USB controller), and not really + interesting. Suffices to say the data from this buffer is quickly + gathered in an interrupt handler (pwc_isoc_handler) and placed into the + frame buffer. + + The frame buffer is the second scheme, and is the central element here. + It collects the data from a single frame from the camera (hence, the + name). Frames are delimited by the USB camera with a short USB packet, + so that's easy to detect. The frame buffers form a list that is filled + by the camera+USB controller and drained by the user process through + either read() or mmap(). + + The image buffer is the third scheme, in which frames are decompressed + and converted into planar format. For mmap() there is more than + one image buffer available. + + The frame buffers provide the image buffering. In case the user process + is a bit slow, this introduces lag and some undesired side-effects. + The problem arises when the frame buffer is full. I used to drop the last + frame, which makes the data in the queue stale very quickly. But dropping + the frame at the head of the queue proved to be a litte bit more difficult. + I tried a circular linked scheme, but this introduced more problems than + it solved. + + Because filling and draining are completely asynchronous processes, this + requires some fiddling with pointers and mutexes. + + Eventually, I came up with a system with 2 lists: an 'empty' frame list + and a 'full' frame list: + * Initially, all frame buffers but one are on the 'empty' list; the one + remaining buffer is our initial fill frame. + * If a frame is needed for filling, we try to take it from the 'empty' + list, unless that list is empty, in which case we take the buffer at + the head of the 'full' list. + * When our fill buffer has been filled, it is appended to the 'full' + list. + * If a frame is needed by read() or mmap(), it is taken from the head of + the 'full' list, handled, and then appended to the 'empty' list. If no + buffer is present on the 'full' list, we wait. + The advantage is that the buffer that is currently being decompressed/ + converted, is on neither list, and thus not in our way (any other scheme + I tried had the problem of old data lingering in the queue). + + Whatever strategy you choose, it always remains a tradeoff: with more + frame buffers the chances of a missed frame are reduced. On the other + hand, on slower machines it introduces lag because the queue will + always be full. + */ + +/** + \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first. + */ +static inline int pwc_next_fill_frame(struct pwc_device *pdev) +{ + int ret; + unsigned long flags; + + ret = 0; + spin_lock_irqsave(&pdev->ptrlock, flags); + if (pdev->fill_frame != NULL) { + /* append to 'full' list */ + if (pdev->full_frames == NULL) { + pdev->full_frames = pdev->fill_frame; + pdev->full_frames_tail = pdev->full_frames; + } + else { + pdev->full_frames_tail->next = pdev->fill_frame; + pdev->full_frames_tail = pdev->fill_frame; + } + } + if (pdev->empty_frames != NULL) { + /* We have empty frames available. That's easy */ + pdev->fill_frame = pdev->empty_frames; + pdev->empty_frames = pdev->empty_frames->next; + } + else { + /* Hmm. Take it from the full list */ +#if PWC_DEBUG + /* sanity check */ + if (pdev->full_frames == NULL) { + Err("Neither empty or full frames available!\n"); + spin_unlock_irqrestore(&pdev->ptrlock, flags); + return -EINVAL; + } +#endif + pdev->fill_frame = pdev->full_frames; + pdev->full_frames = pdev->full_frames->next; + ret = 1; + } + pdev->fill_frame->next = NULL; +#if PWC_DEBUG + Trace(TRACE_SEQUENCE, "Assigning sequence number %d.\n", pdev->sequence); + pdev->fill_frame->sequence = pdev->sequence++; +#endif + spin_unlock_irqrestore(&pdev->ptrlock, flags); + return ret; +} + + +/** + \brief Reset all buffers, pointers and lists, except for the image_used[] buffer. + + If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble. + */ +static void pwc_reset_buffers(struct pwc_device *pdev) +{ + int i; + unsigned long flags; + + spin_lock_irqsave(&pdev->ptrlock, flags); + pdev->full_frames = NULL; + pdev->full_frames_tail = NULL; + for (i = 0; i < default_fbufs; i++) { + pdev->fbuf[i].filled = 0; + if (i > 0) + pdev->fbuf[i].next = &pdev->fbuf[i - 1]; + else + pdev->fbuf->next = NULL; + } + pdev->empty_frames = &pdev->fbuf[default_fbufs - 1]; + pdev->empty_frames_tail = pdev->fbuf; + pdev->read_frame = NULL; + pdev->fill_frame = pdev->empty_frames; + pdev->empty_frames = pdev->empty_frames->next; + + pdev->image_read_pos = 0; + pdev->fill_image = 0; + spin_unlock_irqrestore(&pdev->ptrlock, flags); +} + + +/** + \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers. + */ +static int pwc_handle_frame(struct pwc_device *pdev) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&pdev->ptrlock, flags); + /* First grab our read_frame; this is removed from all lists, so + we can release the lock after this without problems */ + if (pdev->read_frame != NULL) { + /* This can't theoretically happen */ + Err("Huh? Read frame still in use?\n"); + } + else { + if (pdev->full_frames == NULL) { + Err("Woops. No frames ready.\n"); + } + else { + pdev->read_frame = pdev->full_frames; + pdev->full_frames = pdev->full_frames->next; + pdev->read_frame->next = NULL; + } + + if (pdev->read_frame != NULL) { +#if PWC_DEBUG + Trace(TRACE_SEQUENCE, "Decompressing frame %d\n", pdev->read_frame->sequence); +#endif + /* Decompression is a lenghty process, so it's outside of the lock. + This gives the isoc_handler the opportunity to fill more frames + in the mean time. + */ + spin_unlock_irqrestore(&pdev->ptrlock, flags); + ret = pwc_decompress(pdev); + spin_lock_irqsave(&pdev->ptrlock, flags); + + /* We're done with read_buffer, tack it to the end of the empty buffer list */ + if (pdev->empty_frames == NULL) { + pdev->empty_frames = pdev->read_frame; + pdev->empty_frames_tail = pdev->empty_frames; + } + else { + pdev->empty_frames_tail->next = pdev->read_frame; + pdev->empty_frames_tail = pdev->read_frame; + } + pdev->read_frame = NULL; + } + } + spin_unlock_irqrestore(&pdev->ptrlock, flags); + return ret; +} + +/** + \brief Advance pointers of image buffer (after each user request) +*/ +static inline void pwc_next_image(struct pwc_device *pdev) +{ + pdev->image_used[pdev->fill_image] = 0; + pdev->fill_image = (pdev->fill_image + 1) % default_mbufs; +} + + +/* This gets called for the Isochronous pipe (video). This is done in + * interrupt time, so it has to be fast, not crash, and not stall. Neat. + */ +static void pwc_isoc_handler(struct urb *urb, struct pt_regs *regs) +{ + struct pwc_device *pdev; + int i, fst, flen; + int awake; + struct pwc_frame_buf *fbuf; + unsigned char *fillptr = NULL, *iso_buf = NULL; + + awake = 0; + pdev = (struct pwc_device *)urb->context; + if (pdev == NULL) { + Err("isoc_handler() called with NULL device?!\n"); + return; + } +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("isoc_handler() called with bad magic!\n"); + return; + } +#endif + if (urb->status == -ENOENT || urb->status == -ECONNRESET) { + Trace(TRACE_OPEN, "pwc_isoc_handler(): URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a"); + return; + } + if (urb->status != -EINPROGRESS && urb->status != 0) { + const char *errmsg; + + errmsg = "Unknown"; + switch(urb->status) { + case -ENOSR: errmsg = "Buffer error (overrun)"; break; + case -EPIPE: errmsg = "Stalled (device not responding)"; break; + case -EOVERFLOW: errmsg = "Babble (bad cable?)"; break; + case -EPROTO: errmsg = "Bit-stuff error (bad cable?)"; break; + case -EILSEQ: errmsg = "CRC/Timeout (could be anything)"; break; + case -ETIMEDOUT: errmsg = "NAK (device does not respond)"; break; + } + Trace(TRACE_FLOW, "pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg); + /* Give up after a number of contiguous errors on the USB bus. + Appearantly something is wrong so we simulate an unplug event. + */ + if (++pdev->visoc_errors > MAX_ISOC_ERRORS) + { + Info("Too many ISOC errors, bailing out.\n"); + pdev->error_status = EIO; + awake = 1; + wake_up_interruptible(&pdev->frameq); + } + goto handler_end; // ugly, but practical + } + + fbuf = pdev->fill_frame; + if (fbuf == NULL) { + Err("pwc_isoc_handler without valid fill frame.\n"); + awake = 1; + goto handler_end; + } + else { + fillptr = fbuf->data + fbuf->filled; + } + + /* Reset ISOC error counter. We did get here, after all. */ + pdev->visoc_errors = 0; + + /* vsync: 0 = don't copy data + 1 = sync-hunt + 2 = synched + */ + /* Compact data */ + for (i = 0; i < urb->number_of_packets; i++) { + fst = urb->iso_frame_desc[i].status; + flen = urb->iso_frame_desc[i].actual_length; + iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + if (fst == 0) { + if (flen > 0) { /* if valid data... */ + if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */ + pdev->vsync = 2; + + /* ...copy data to frame buffer, if possible */ + if (flen + fbuf->filled > pdev->frame_total_size) { + Trace(TRACE_FLOW, "Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size); + pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */ + pdev->vframes_error++; + } + else { + memmove(fillptr, iso_buf, flen); + fillptr += flen; + } + } + fbuf->filled += flen; + } /* ..flen > 0 */ + + if (flen < pdev->vlast_packet_size) { + /* Shorter packet... We probably have the end of an image-frame; + wake up read() process and let select()/poll() do something. + Decompression is done in user time over there. + */ + if (pdev->vsync == 2) { + /* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus + frames on the USB wire after an exposure change. This conditition is + however detected in the cam and a bit is set in the header. + */ + if (pdev->type == 730) { + unsigned char *ptr = (unsigned char *)fbuf->data; + + if (ptr[1] == 1 && ptr[0] & 0x10) { +#if PWC_DEBUG + Debug("Hyundai CMOS sensor bug. Dropping frame %d.\n", fbuf->sequence); +#endif + pdev->drop_frames += 2; + pdev->vframes_error++; + } + if ((ptr[0] ^ pdev->vmirror) & 0x01) { + if (ptr[0] & 0x01) + Info("Snapshot button pressed.\n"); + else + Info("Snapshot button released.\n"); + } + if ((ptr[0] ^ pdev->vmirror) & 0x02) { + if (ptr[0] & 0x02) + Info("Image is mirrored.\n"); + else + Info("Image is normal.\n"); + } + pdev->vmirror = ptr[0] & 0x03; + /* Sometimes the trailer of the 730 is still sent as a 4 byte packet + after a short frame; this condition is filtered out specifically. A 4 byte + frame doesn't make sense anyway. + So we get either this sequence: + drop_bit set -> 4 byte frame -> short frame -> good frame + Or this one: + drop_bit set -> short frame -> good frame + So we drop either 3 or 2 frames in all! + */ + if (fbuf->filled == 4) + pdev->drop_frames++; + } + + /* In case we were instructed to drop the frame, do so silently. + The buffer pointers are not updated either (but the counters are reset below). + */ + if (pdev->drop_frames > 0) + pdev->drop_frames--; + else { + /* Check for underflow first */ + if (fbuf->filled < pdev->frame_total_size) { + Trace(TRACE_FLOW, "Frame buffer underflow (%d bytes); discarded.\n", fbuf->filled); + pdev->vframes_error++; + } + else { + /* Send only once per EOF */ + awake = 1; /* delay wake_ups */ + + /* Find our next frame to fill. This will always succeed, since we + * nick a frame from either empty or full list, but if we had to + * take it from the full list, it means a frame got dropped. + */ + if (pwc_next_fill_frame(pdev)) { + pdev->vframes_dumped++; + if ((pdev->vframe_count > FRAME_LOWMARK) && (pwc_trace & TRACE_FLOW)) { + if (pdev->vframes_dumped < 20) + Trace(TRACE_FLOW, "Dumping frame %d.\n", pdev->vframe_count); + if (pdev->vframes_dumped == 20) + Trace(TRACE_FLOW, "Dumping frame %d (last message).\n", pdev->vframe_count); + } + } + fbuf = pdev->fill_frame; + } + } /* !drop_frames */ + pdev->vframe_count++; + } + fbuf->filled = 0; + fillptr = fbuf->data; + pdev->vsync = 1; + } /* .. flen < last_packet_size */ + pdev->vlast_packet_size = flen; + } /* ..status == 0 */ +#if PWC_DEBUG + /* This is normally not interesting to the user, unless you are really debugging something */ + else { + static int iso_error = 0; + iso_error++; + if (iso_error < 20) + Trace(TRACE_FLOW, "Iso frame %d of USB has error %d\n", i, fst); + } +#endif + } + +handler_end: + if (awake) + wake_up_interruptible(&pdev->frameq); + + urb->dev = pdev->udev; + i = usb_submit_urb(urb, GFP_ATOMIC); + if (i != 0) + Err("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i); +} + + +static int pwc_isoc_init(struct pwc_device *pdev) +{ + struct usb_device *udev; + struct urb *urb; + int i, j, ret; + + struct usb_interface *intf; + struct usb_host_interface *idesc = NULL; + + if (pdev == NULL) + return -EFAULT; + if (pdev->iso_init) + return 0; + pdev->vsync = 0; + udev = pdev->udev; + + /* Get the current alternate interface, adjust packet size */ + if (!udev->actconfig) + return -EFAULT; + + intf = usb_ifnum_to_if(udev, 0); + if (intf) + idesc = usb_altnum_to_altsetting(intf, pdev->valternate); + + if (!idesc) + return -EFAULT; + + /* Search video endpoint */ + pdev->vmax_packet_size = -1; + for (i = 0; i < idesc->desc.bNumEndpoints; i++) + if ((idesc->endpoint[i].desc.bEndpointAddress & 0xF) == pdev->vendpoint) { + pdev->vmax_packet_size = le16_to_cpu(idesc->endpoint[i].desc.wMaxPacketSize); + break; + } + + if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) { + Err("Failed to find packet size for video endpoint in current alternate setting.\n"); + return -ENFILE; /* Odd error, that should be noticeable */ + } + + /* Set alternate interface */ + ret = 0; + Trace(TRACE_OPEN, "Setting alternate interface %d\n", pdev->valternate); + ret = usb_set_interface(pdev->udev, 0, pdev->valternate); + if (ret < 0) + return ret; + + for (i = 0; i < MAX_ISO_BUFS; i++) { + urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); + if (urb == NULL) { + Err("Failed to allocate urb %d\n", i); + ret = -ENOMEM; + break; + } + pdev->sbuf[i].urb = urb; + Trace(TRACE_MEMORY, "Allocated URB at 0x%p\n", urb); + } + if (ret) { + /* De-allocate in reverse order */ + while (i >= 0) { + if (pdev->sbuf[i].urb != NULL) + usb_free_urb(pdev->sbuf[i].urb); + pdev->sbuf[i].urb = NULL; + i--; + } + return ret; + } + + /* init URB structure */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + urb = pdev->sbuf[i].urb; + + urb->interval = 1; // devik + urb->dev = udev; + urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = pdev->sbuf[i].data; + urb->transfer_buffer_length = ISO_BUFFER_SIZE; + urb->complete = pwc_isoc_handler; + urb->context = pdev; + urb->start_frame = 0; + urb->number_of_packets = ISO_FRAMES_PER_DESC; + for (j = 0; j < ISO_FRAMES_PER_DESC; j++) { + urb->iso_frame_desc[j].offset = j * ISO_MAX_FRAME_SIZE; + urb->iso_frame_desc[j].length = pdev->vmax_packet_size; + } + } + + /* link */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL); + if (ret) + Err("isoc_init() submit_urb %d failed with error %d\n", i, ret); + else + Trace(TRACE_MEMORY, "URB 0x%p submitted.\n", pdev->sbuf[i].urb); + } + + /* All is done... */ + pdev->iso_init = 1; + Trace(TRACE_OPEN, "<< pwc_isoc_init()\n"); + return 0; +} + +static void pwc_isoc_cleanup(struct pwc_device *pdev) +{ + int i; + + Trace(TRACE_OPEN, ">> pwc_isoc_cleanup()\n"); + if (pdev == NULL) + return; + + /* Unlinking ISOC buffers one by one */ + for (i = 0; i < MAX_ISO_BUFS; i++) { + struct urb *urb; + + urb = pdev->sbuf[i].urb; + if (urb != 0) { + if (pdev->iso_init) { + Trace(TRACE_MEMORY, "Unlinking URB %p\n", urb); + usb_kill_urb(urb); + } + Trace(TRACE_MEMORY, "Freeing URB\n"); + usb_free_urb(urb); + pdev->sbuf[i].urb = NULL; + } + } + + /* Stop camera, but only if we are sure the camera is still there (unplug + is signalled by EPIPE) + */ + if (pdev->error_status && pdev->error_status != EPIPE) { + Trace(TRACE_OPEN, "Setting alternate interface 0.\n"); + usb_set_interface(pdev->udev, 0, 0); + } + + pdev->iso_init = 0; + Trace(TRACE_OPEN, "<< pwc_isoc_cleanup()\n"); +} + +int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot) +{ + int ret, start; + + /* Stop isoc stuff */ + pwc_isoc_cleanup(pdev); + /* Reset parameters */ + pwc_reset_buffers(pdev); + /* Try to set video mode... */ + start = ret = pwc_set_video_mode(pdev, width, height, new_fps, new_compression, new_snapshot); + if (ret) { + Trace(TRACE_FLOW, "pwc_set_video_mode attempt 1 failed.\n"); + /* That failed... restore old mode (we know that worked) */ + start = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot); + if (start) { + Trace(TRACE_FLOW, "pwc_set_video_mode attempt 2 failed.\n"); + } + } + if (start == 0) + { + if (pwc_isoc_init(pdev) < 0) + { + Info("Failed to restart ISOC transfers in pwc_try_video_mode.\n"); + ret = -EAGAIN; /* let's try again, who knows if it works a second time */ + } + } + pdev->drop_frames++; /* try to avoid garbage during switch */ + return ret; /* Return original error code */ +} + + +/***************************************************************************/ +/* Video4Linux functions */ + +static int pwc_video_open(struct inode *inode, struct file *file) +{ + int i; + struct video_device *vdev = video_devdata(file); + struct pwc_device *pdev; + + Trace(TRACE_OPEN, ">> video_open called(vdev = 0x%p).\n", vdev); + + pdev = (struct pwc_device *)vdev->priv; + if (pdev == NULL) + BUG(); + if (pdev->vopen) + return -EBUSY; + + down(&pdev->modlock); + if (!pdev->usb_init) { + Trace(TRACE_OPEN, "Doing first time initialization.\n"); + pdev->usb_init = 1; + + if (pwc_trace & TRACE_OPEN) + { + /* Query sensor type */ + const char *sensor_type = NULL; + int ret; + + ret = pwc_get_cmos_sensor(pdev, &i); + if (ret >= 0) + { + switch(i) { + case 0x00: sensor_type = "Hyundai CMOS sensor"; break; + case 0x20: sensor_type = "Sony CCD sensor + TDA8787"; break; + case 0x2E: sensor_type = "Sony CCD sensor + Exas 98L59"; break; + case 0x2F: sensor_type = "Sony CCD sensor + ADI 9804"; break; + case 0x30: sensor_type = "Sharp CCD sensor + TDA8787"; break; + case 0x3E: sensor_type = "Sharp CCD sensor + Exas 98L59"; break; + case 0x3F: sensor_type = "Sharp CCD sensor + ADI 9804"; break; + case 0x40: sensor_type = "UPA 1021 sensor"; break; + case 0x100: sensor_type = "VGA sensor"; break; + case 0x101: sensor_type = "PAL MR sensor"; break; + default: sensor_type = "unknown type of sensor"; break; + } + } + if (sensor_type != NULL) + Info("This %s camera is equipped with a %s (%d).\n", pdev->vdev->name, sensor_type, i); + } + } + + /* Turn on camera */ + if (power_save) { + i = pwc_camera_power(pdev, 1); + if (i < 0) + Info("Failed to restore power to the camera! (%d)\n", i); + } + /* Set LED on/off time */ + if (pwc_set_leds(pdev, led_on, led_off) < 0) + Info("Failed to set LED on/off time.\n"); + + pwc_construct(pdev); /* set min/max sizes correct */ + + /* So far, so good. Allocate memory. */ + i = pwc_allocate_buffers(pdev); + if (i < 0) { + Trace(TRACE_OPEN, "Failed to allocate buffer memory.\n"); + up(&pdev->modlock); + return i; + } + + /* Reset buffers & parameters */ + pwc_reset_buffers(pdev); + for (i = 0; i < default_mbufs; i++) + pdev->image_used[i] = 0; + pdev->vframe_count = 0; + pdev->vframes_dumped = 0; + pdev->vframes_error = 0; + pdev->visoc_errors = 0; + pdev->error_status = 0; +#if PWC_DEBUG + pdev->sequence = 0; +#endif + pwc_construct(pdev); /* set min/max sizes correct */ + + /* Set some defaults */ + pdev->vsnapshot = 0; + + /* Start iso pipe for video; first try the last used video size + (or the default one); if that fails try QCIF/10 or QSIF/10; + it that fails too, give up. + */ + i = pwc_set_video_mode(pdev, pwc_image_sizes[pdev->vsize].x, pwc_image_sizes[pdev->vsize].y, pdev->vframes, pdev->vcompression, 0); + if (i) { + Trace(TRACE_OPEN, "First attempt at set_video_mode failed.\n"); + if (pdev->type == 730 || pdev->type == 740 || pdev->type == 750) + i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QSIF].x, pwc_image_sizes[PSZ_QSIF].y, 10, pdev->vcompression, 0); + else + i = pwc_set_video_mode(pdev, pwc_image_sizes[PSZ_QCIF].x, pwc_image_sizes[PSZ_QCIF].y, 10, pdev->vcompression, 0); + } + if (i) { + Trace(TRACE_OPEN, "Second attempt at set_video_mode failed.\n"); + up(&pdev->modlock); + return i; + } + + i = pwc_isoc_init(pdev); + if (i) { + Trace(TRACE_OPEN, "Failed to init ISOC stuff = %d.\n", i); + up(&pdev->modlock); + return i; + } + + pdev->vopen++; + file->private_data = vdev; + up(&pdev->modlock); + Trace(TRACE_OPEN, "<< video_open() returns 0.\n"); + return 0; +} + +/* Note that all cleanup is done in the reverse order as in _open */ +static int pwc_video_close(struct inode *inode, struct file *file) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + int i; + + Trace(TRACE_OPEN, ">> video_close called(vdev = 0x%p).\n", vdev); + + pdev = (struct pwc_device *)vdev->priv; + if (pdev->vopen == 0) + Info("video_close() called on closed device?\n"); + + /* Dump statistics, but only if a reasonable amount of frames were + processed (to prevent endless log-entries in case of snap-shot + programs) + */ + if (pdev->vframe_count > 20) + Info("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error); + + switch (pdev->type) + { + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: +/* pwc_dec23_exit(); *//* Timon & Kiara */ + break; + case 645: + case 646: +/* pwc_dec1_exit(); */ + break; + } + + pwc_isoc_cleanup(pdev); + pwc_free_buffers(pdev); + + /* Turn off LEDS and power down camera, but only when not unplugged */ + if (pdev->error_status != EPIPE) { + /* Turn LEDs off */ + if (pwc_set_leds(pdev, 0, 0) < 0) + Info("Failed to set LED on/off time.\n"); + if (power_save) { + i = pwc_camera_power(pdev, 0); + if (i < 0) + Err("Failed to power down camera (%d)\n", i); + } + } + pdev->vopen = 0; + Trace(TRACE_OPEN, "<< video_close()\n"); + return 0; +} + +/* + * FIXME: what about two parallel reads ???? + * ANSWER: Not supported. You can't open the device more than once, + despite what the V4L1 interface says. First, I don't see + the need, second there's no mechanism of alerting the + 2nd/3rd/... process of events like changing image size. + And I don't see the point of blocking that for the + 2nd/3rd/... process. + In multi-threaded environments reading parallel from any + device is tricky anyhow. + */ + +static ssize_t pwc_video_read(struct file *file, char __user * buf, + size_t count, loff_t *ppos) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + int noblock = file->f_flags & O_NONBLOCK; + DECLARE_WAITQUEUE(wait, current); + int bytes_to_read; + + Trace(TRACE_READ, "video_read(0x%p, %p, %zu) called.\n", vdev, buf, count); + if (vdev == NULL) + return -EFAULT; + pdev = vdev->priv; + if (pdev == NULL) + return -EFAULT; + if (pdev->error_status) + return -pdev->error_status; /* Something happened, report what. */ + + /* In case we're doing partial reads, we don't have to wait for a frame */ + if (pdev->image_read_pos == 0) { + /* Do wait queueing according to the (doc)book */ + add_wait_queue(&pdev->frameq, &wait); + while (pdev->full_frames == NULL) { + /* Check for unplugged/etc. here */ + if (pdev->error_status) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -pdev->error_status ; + } + if (noblock) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -EWOULDBLOCK; + } + if (signal_pending(current)) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -ERESTARTSYS; + } + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + + /* Decompress and release frame */ + if (pwc_handle_frame(pdev)) + return -EFAULT; + } + + Trace(TRACE_READ, "Copying data to user space.\n"); + if (pdev->vpalette == VIDEO_PALETTE_RAW) + bytes_to_read = pdev->frame_size; + else + bytes_to_read = pdev->view.size; + + /* copy bytes to user space; we allow for partial reads */ + if (count + pdev->image_read_pos > bytes_to_read) + count = bytes_to_read - pdev->image_read_pos; + if (copy_to_user(buf, pdev->image_ptr[pdev->fill_image] + pdev->image_read_pos, count)) + return -EFAULT; + pdev->image_read_pos += count; + if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */ + pdev->image_read_pos = 0; + pwc_next_image(pdev); + } + return count; +} + +static unsigned int pwc_video_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + + if (vdev == NULL) + return -EFAULT; + pdev = vdev->priv; + if (pdev == NULL) + return -EFAULT; + + poll_wait(file, &pdev->frameq, wait); + if (pdev->error_status) + return POLLERR; + if (pdev->full_frames != NULL) /* we have frames waiting */ + return (POLLIN | POLLRDNORM); + + return 0; +} + +static int pwc_video_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + DECLARE_WAITQUEUE(wait, current); + + if (vdev == NULL) + return -EFAULT; + pdev = vdev->priv; + if (pdev == NULL) + return -EFAULT; + + switch (cmd) { + /* Query cabapilities */ + case VIDIOCGCAP: + { + struct video_capability *caps = arg; + + strcpy(caps->name, vdev->name); + caps->type = VID_TYPE_CAPTURE; + caps->channels = 1; + caps->audios = 1; + caps->minwidth = pdev->view_min.x; + caps->minheight = pdev->view_min.y; + caps->maxwidth = pdev->view_max.x; + caps->maxheight = pdev->view_max.y; + break; + } + + /* Channel functions (simulate 1 channel) */ + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + v->flags = 0; + v->tuners = 0; + v->type = VIDEO_TYPE_CAMERA; + strcpy(v->name, "Webcam"); + return 0; + } + + case VIDIOCSCHAN: + { + /* The spec says the argument is an integer, but + the bttv driver uses a video_channel arg, which + makes sense becasue it also has the norm flag. + */ + struct video_channel *v = arg; + if (v->channel != 0) + return -EINVAL; + return 0; + } + + + /* Picture functions; contrast etc. */ + case VIDIOCGPICT: + { + struct video_picture *p = arg; + int val; + + val = pwc_get_brightness(pdev); + if (val >= 0) + p->brightness = val; + else + p->brightness = 0xffff; + val = pwc_get_contrast(pdev); + if (val >= 0) + p->contrast = val; + else + p->contrast = 0xffff; + /* Gamma, Whiteness, what's the difference? :) */ + val = pwc_get_gamma(pdev); + if (val >= 0) + p->whiteness = val; + else + p->whiteness = 0xffff; + val = pwc_get_saturation(pdev); + if (val >= 0) + p->colour = val; + else + p->colour = 0xffff; + p->depth = 24; + p->palette = pdev->vpalette; + p->hue = 0xFFFF; /* N/A */ + break; + } + + case VIDIOCSPICT: + { + struct video_picture *p = arg; + /* + * FIXME: Suppose we are mid read + ANSWER: No problem: the firmware of the camera + can handle brightness/contrast/etc + changes at _any_ time, and the palette + is used exactly once in the uncompress + routine. + */ + pwc_set_brightness(pdev, p->brightness); + pwc_set_contrast(pdev, p->contrast); + pwc_set_gamma(pdev, p->whiteness); + pwc_set_saturation(pdev, p->colour); + if (p->palette && p->palette != pdev->vpalette) { + switch (p->palette) { + case VIDEO_PALETTE_YUV420P: + case VIDEO_PALETTE_RAW: + pdev->vpalette = p->palette; + return pwc_try_video_mode(pdev, pdev->image.x, pdev->image.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot); + break; + default: + return -EINVAL; + break; + } + } + break; + } + + /* Window/size parameters */ + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + vw->x = 0; + vw->y = 0; + vw->width = pdev->view.x; + vw->height = pdev->view.y; + vw->chromakey = 0; + vw->flags = (pdev->vframes << PWC_FPS_SHIFT) | + (pdev->vsnapshot ? PWC_FPS_SNAPSHOT : 0); + break; + } + + case VIDIOCSWIN: + { + struct video_window *vw = arg; + int fps, snapshot, ret; + + fps = (vw->flags & PWC_FPS_FRMASK) >> PWC_FPS_SHIFT; + snapshot = vw->flags & PWC_FPS_SNAPSHOT; + if (fps == 0) + fps = pdev->vframes; + if (pdev->view.x == vw->width && pdev->view.y && fps == pdev->vframes && snapshot == pdev->vsnapshot) + return 0; + ret = pwc_try_video_mode(pdev, vw->width, vw->height, fps, pdev->vcompression, snapshot); + if (ret) + return ret; + break; + } + + /* We don't have overlay support (yet) */ + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + memset(vb,0,sizeof(*vb)); + break; + } + + /* mmap() functions */ + case VIDIOCGMBUF: + { + /* Tell the user program how much memory is needed for a mmap() */ + struct video_mbuf *vm = arg; + int i; + + memset(vm, 0, sizeof(*vm)); + vm->size = default_mbufs * pdev->len_per_image; + vm->frames = default_mbufs; /* double buffering should be enough for most applications */ + for (i = 0; i < default_mbufs; i++) + vm->offsets[i] = i * pdev->len_per_image; + break; + } + + case VIDIOCMCAPTURE: + { + /* Start capture into a given image buffer (called 'frame' in video_mmap structure) */ + struct video_mmap *vm = arg; + + Trace(TRACE_READ, "VIDIOCMCAPTURE: %dx%d, frame %d, format %d\n", vm->width, vm->height, vm->frame, vm->format); + if (vm->frame < 0 || vm->frame >= default_mbufs) + return -EINVAL; + + /* xawtv is nasty. It probes the available palettes + by setting a very small image size and trying + various palettes... The driver doesn't support + such small images, so I'm working around it. + */ + if (vm->format) + { + switch (vm->format) + { + case VIDEO_PALETTE_YUV420P: + case VIDEO_PALETTE_RAW: + break; + default: + return -EINVAL; + break; + } + } + + if ((vm->width != pdev->view.x || vm->height != pdev->view.y) && + (vm->width >= pdev->view_min.x && vm->height >= pdev->view_min.y)) { + int ret; + + Trace(TRACE_OPEN, "VIDIOCMCAPTURE: changing size to please xawtv :-(.\n"); + ret = pwc_try_video_mode(pdev, vm->width, vm->height, pdev->vframes, pdev->vcompression, pdev->vsnapshot); + if (ret) + return ret; + } /* ... size mismatch */ + + /* FIXME: should we lock here? */ + if (pdev->image_used[vm->frame]) + return -EBUSY; /* buffer wasn't available. Bummer */ + pdev->image_used[vm->frame] = 1; + + /* Okay, we're done here. In the SYNC call we wait until a + frame comes available, then expand image into the given + buffer. + In contrast to the CPiA cam the Philips cams deliver a + constant stream, almost like a grabber card. Also, + we have separate buffers for the rawdata and the image, + meaning we can nearly always expand into the requested buffer. + */ + Trace(TRACE_READ, "VIDIOCMCAPTURE done.\n"); + break; + } + + case VIDIOCSYNC: + { + /* The doc says: "Whenever a buffer is used it should + call VIDIOCSYNC to free this frame up and continue." + + The only odd thing about this whole procedure is + that MCAPTURE flags the buffer as "in use", and + SYNC immediately unmarks it, while it isn't + after SYNC that you know that the buffer actually + got filled! So you better not start a CAPTURE in + the same frame immediately (use double buffering). + This is not a problem for this cam, since it has + extra intermediate buffers, but a hardware + grabber card will then overwrite the buffer + you're working on. + */ + int *mbuf = arg; + int ret; + + Trace(TRACE_READ, "VIDIOCSYNC called (%d).\n", *mbuf); + + /* bounds check */ + if (*mbuf < 0 || *mbuf >= default_mbufs) + return -EINVAL; + /* check if this buffer was requested anyway */ + if (pdev->image_used[*mbuf] == 0) + return -EINVAL; + + /* Add ourselves to the frame wait-queue. + + FIXME: needs auditing for safety. + QUESTION: In what respect? I think that using the + frameq is safe now. + */ + add_wait_queue(&pdev->frameq, &wait); + while (pdev->full_frames == NULL) { + if (pdev->error_status) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -pdev->error_status; + } + + if (signal_pending(current)) { + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + return -ERESTARTSYS; + } + schedule(); + set_current_state(TASK_INTERRUPTIBLE); + } + remove_wait_queue(&pdev->frameq, &wait); + set_current_state(TASK_RUNNING); + + /* The frame is ready. Expand in the image buffer + requested by the user. I don't care if you + mmap() 5 buffers and request data in this order: + buffer 4 2 3 0 1 2 3 0 4 3 1 . . . + Grabber hardware may not be so forgiving. + */ + Trace(TRACE_READ, "VIDIOCSYNC: frame ready.\n"); + pdev->fill_image = *mbuf; /* tell in which buffer we want the image to be expanded */ + /* Decompress, etc */ + ret = pwc_handle_frame(pdev); + pdev->image_used[*mbuf] = 0; + if (ret) + return -EFAULT; + break; + } + + case VIDIOCGAUDIO: + { + struct video_audio *v = arg; + + strcpy(v->name, "Microphone"); + v->audio = -1; /* unknown audio minor */ + v->flags = 0; + v->mode = VIDEO_SOUND_MONO; + v->volume = 0; + v->bass = 0; + v->treble = 0; + v->balance = 0x8000; + v->step = 1; + break; + } + + case VIDIOCSAUDIO: + { + /* Dummy: nothing can be set */ + break; + } + + case VIDIOCGUNIT: + { + struct video_unit *vu = arg; + + vu->video = pdev->vdev->minor & 0x3F; + vu->audio = -1; /* not known yet */ + vu->vbi = -1; + vu->radio = -1; + vu->teletext = -1; + break; + } + default: + return pwc_ioctl(pdev, cmd, arg); + } /* ..switch */ + return 0; +} + +static int pwc_video_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, pwc_video_do_ioctl); +} + + +static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + Trace(TRACE_MEMORY, "mmap(0x%p, 0x%lx, %lu) called.\n", vdev, start, size); + pdev = vdev->priv; + + vma->vm_flags |= VM_IO; + + pos = (unsigned long)pdev->image_data; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) + return -EAGAIN; + + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + return 0; +} + +/***************************************************************************/ +/* USB functions */ + +/* This function gets called when a new device is plugged in or the usb core + * is loaded. + */ + +static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct pwc_device *pdev = NULL; + int vendor_id, product_id, type_id; + int i, hint; + int features = 0; + int video_nr = -1; /* default: use next available device */ + char serial_number[30], *name; + + /* Check if we can handle this device */ + Trace(TRACE_PROBE, "probe() called [%04X %04X], if %d\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + intf->altsetting->desc.bInterfaceNumber); + + /* the interfaces are probed one by one. We are only interested in the + video interface (0) now. + Interface 1 is the Audio Control, and interface 2 Audio itself. + */ + if (intf->altsetting->desc.bInterfaceNumber > 0) + return -ENODEV; + + vendor_id = le16_to_cpu(udev->descriptor.idVendor); + product_id = le16_to_cpu(udev->descriptor.idProduct); + + if (vendor_id == 0x0471) { + switch (product_id) { + case 0x0302: + Info("Philips PCA645VC USB webcam detected.\n"); + name = "Philips 645 webcam"; + type_id = 645; + break; + case 0x0303: + Info("Philips PCA646VC USB webcam detected.\n"); + name = "Philips 646 webcam"; + type_id = 646; + break; + case 0x0304: + Info("Askey VC010 type 2 USB webcam detected.\n"); + name = "Askey VC010 webcam"; + type_id = 646; + break; + case 0x0307: + Info("Philips PCVC675K (Vesta) USB webcam detected.\n"); + name = "Philips 675 webcam"; + type_id = 675; + break; + case 0x0308: + Info("Philips PCVC680K (Vesta Pro) USB webcam detected.\n"); + name = "Philips 680 webcam"; + type_id = 680; + break; + case 0x030C: + Info("Philips PCVC690K (Vesta Pro Scan) USB webcam detected.\n"); + name = "Philips 690 webcam"; + type_id = 690; + break; + case 0x0310: + Info("Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) USB webcam detected.\n"); + name = "Philips 730 webcam"; + type_id = 730; + break; + case 0x0311: + Info("Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II) USB webcam detected.\n"); + name = "Philips 740 webcam"; + type_id = 740; + break; + case 0x0312: + Info("Philips PCVC750K (ToUCam Pro Scan) USB webcam detected.\n"); + name = "Philips 750 webcam"; + type_id = 750; + break; + case 0x0313: + Info("Philips PCVC720K/40 (ToUCam XS) USB webcam detected.\n"); + name = "Philips 720K/40 webcam"; + type_id = 720; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x069A) { + switch(product_id) { + case 0x0001: + Info("Askey VC010 type 1 USB webcam detected.\n"); + name = "Askey VC010 webcam"; + type_id = 645; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x046d) { + switch(product_id) { + case 0x08b0: + Info("Logitech QuickCam Pro 3000 USB webcam detected.\n"); + name = "Logitech QuickCam Pro 3000"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b1: + Info("Logitech QuickCam Notebook Pro USB webcam detected.\n"); + name = "Logitech QuickCam Notebook Pro"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b2: + Info("Logitech QuickCam 4000 Pro USB webcam detected.\n"); + name = "Logitech QuickCam Pro 4000"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b3: + Info("Logitech QuickCam Zoom USB webcam detected.\n"); + name = "Logitech QuickCam Zoom"; + type_id = 740; /* CCD sensor */ + break; + case 0x08B4: + Info("Logitech QuickCam Zoom (new model) USB webcam detected.\n"); + name = "Logitech QuickCam Zoom"; + type_id = 740; /* CCD sensor */ + break; + case 0x08b5: + Info("Logitech QuickCam Orbit/Sphere USB webcam detected.\n"); + name = "Logitech QuickCam Orbit"; + type_id = 740; /* CCD sensor */ + features |= FEATURE_MOTOR_PANTILT; + break; + case 0x08b6: + case 0x08b7: + case 0x08b8: + Info("Logitech QuickCam detected (reserved ID).\n"); + name = "Logitech QuickCam (res.)"; + type_id = 730; /* Assuming CMOS */ + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x055d) { + /* I don't know the difference between the C10 and the C30; + I suppose the difference is the sensor, but both cameras + work equally well with a type_id of 675 + */ + switch(product_id) { + case 0x9000: + Info("Samsung MPC-C10 USB webcam detected.\n"); + name = "Samsung MPC-C10"; + type_id = 675; + break; + case 0x9001: + Info("Samsung MPC-C30 USB webcam detected.\n"); + name = "Samsung MPC-C30"; + type_id = 675; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x041e) { + switch(product_id) { + case 0x400c: + Info("Creative Labs Webcam 5 detected.\n"); + name = "Creative Labs Webcam 5"; + type_id = 730; + break; + case 0x4011: + Info("Creative Labs Webcam Pro Ex detected.\n"); + name = "Creative Labs Webcam Pro Ex"; + type_id = 740; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x04cc) { + switch(product_id) { + case 0x8116: + Info("Sotec Afina Eye USB webcam detected.\n"); + name = "Sotec Afina Eye"; + type_id = 730; + break; + default: + return -ENODEV; + break; + } + } + else if (vendor_id == 0x06be) { + switch(product_id) { + case 0x8116: + /* This is essentially the same cam as the Sotec Afina Eye */ + Info("AME Co. Afina Eye USB webcam detected.\n"); + name = "AME Co. Afina Eye"; + type_id = 750; + break; + default: + return -ENODEV; + break; + } + + } + else if (vendor_id == 0x0d81) { + switch(product_id) { + case 0x1900: + Info("Visionite VCS-UC300 USB webcam detected.\n"); + name = "Visionite VCS-UC300"; + type_id = 740; /* CCD sensor */ + break; + case 0x1910: + Info("Visionite VCS-UM100 USB webcam detected.\n"); + name = "Visionite VCS-UM100"; + type_id = 730; /* CMOS sensor */ + break; + default: + return -ENODEV; + break; + } + } + else + return -ENODEV; /* Not any of the know types; but the list keeps growing. */ + + memset(serial_number, 0, 30); + usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29); + Trace(TRACE_PROBE, "Device serial number is %s\n", serial_number); + + if (udev->descriptor.bNumConfigurations > 1) + Info("Warning: more than 1 configuration available.\n"); + + /* Allocate structure, initialize pointers, mutexes, etc. and link it to the usb_device */ + pdev = kzalloc(sizeof(struct pwc_device), GFP_KERNEL); + if (pdev == NULL) { + Err("Oops, could not allocate memory for pwc_device.\n"); + return -ENOMEM; + } + pdev->type = type_id; + pdev->vsize = default_size; + pdev->vframes = default_fps; + strcpy(pdev->serial, serial_number); + pdev->features = features; + if (vendor_id == 0x046D && product_id == 0x08B5) + { + /* Logitech QuickCam Orbit + The ranges have been determined experimentally; they may differ from cam to cam. + Also, the exact ranges left-right and up-down are different for my cam + */ + pdev->angle_range.pan_min = -7000; + pdev->angle_range.pan_max = 7000; + pdev->angle_range.tilt_min = -3000; + pdev->angle_range.tilt_max = 2500; + } + + init_MUTEX(&pdev->modlock); + spin_lock_init(&pdev->ptrlock); + + pdev->udev = udev; + init_waitqueue_head(&pdev->frameq); + pdev->vcompression = pwc_preferred_compression; + + /* Allocate video_device structure */ + pdev->vdev = video_device_alloc(); + if (pdev->vdev == 0) + { + Err("Err, cannot allocate video_device struture. Failing probe."); + kfree(pdev); + return -ENOMEM; + } + memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template)); + strcpy(pdev->vdev->name, name); + pdev->vdev->owner = THIS_MODULE; + video_set_drvdata(pdev->vdev, pdev); + + pdev->release = le16_to_cpu(udev->descriptor.bcdDevice); + Trace(TRACE_PROBE, "Release: %04x\n", pdev->release); + + /* Now search device_hint[] table for a match, so we can hint a node number. */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) { + if (((device_hint[hint].type == -1) || (device_hint[hint].type == pdev->type)) && + (device_hint[hint].pdev == NULL)) { + /* so far, so good... try serial number */ + if ((device_hint[hint].serial_number[0] == '*') || !strcmp(device_hint[hint].serial_number, serial_number)) { + /* match! */ + video_nr = device_hint[hint].device_node; + Trace(TRACE_PROBE, "Found hint, will try to register as /dev/video%d\n", video_nr); + break; + } + } + } + + pdev->vdev->release = video_device_release; + i = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr); + if (i < 0) { + Err("Failed to register as video device (%d).\n", i); + video_device_release(pdev->vdev); /* Drip... drip... drip... */ + kfree(pdev); /* Oops, no memory leaks please */ + return -EIO; + } + else { + Info("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F); + } + + /* occupy slot */ + if (hint < MAX_DEV_HINTS) + device_hint[hint].pdev = pdev; + + Trace(TRACE_PROBE, "probe() function returning struct at 0x%p.\n", pdev); + usb_set_intfdata (intf, pdev); + return 0; +} + +/* The user janked out the cable... */ +static void usb_pwc_disconnect(struct usb_interface *intf) +{ + struct pwc_device *pdev; + int hint; + + lock_kernel(); + pdev = usb_get_intfdata (intf); + usb_set_intfdata (intf, NULL); + if (pdev == NULL) { + Err("pwc_disconnect() Called without private pointer.\n"); + goto disconnect_out; + } + if (pdev->udev == NULL) { + Err("pwc_disconnect() already called for %p\n", pdev); + goto disconnect_out; + } + if (pdev->udev != interface_to_usbdev(intf)) { + Err("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n"); + goto disconnect_out; + } +#ifdef PWC_MAGIC + if (pdev->magic != PWC_MAGIC) { + Err("pwc_disconnect() Magic number failed. Consult your scrolls and try again.\n"); + goto disconnect_out; + } +#endif + + /* We got unplugged; this is signalled by an EPIPE error code */ + if (pdev->vopen) { + Info("Disconnected while webcam is in use!\n"); + pdev->error_status = EPIPE; + } + + /* Alert waiting processes */ + wake_up_interruptible(&pdev->frameq); + /* Wait until device is closed */ + while (pdev->vopen) + schedule(); + /* Device is now closed, so we can safely unregister it */ + Trace(TRACE_PROBE, "Unregistering video device in disconnect().\n"); + video_unregister_device(pdev->vdev); + + /* Free memory (don't set pdev to 0 just yet) */ + kfree(pdev); + +disconnect_out: + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; + + unlock_kernel(); +} + + +/* *grunt* We have to do atoi ourselves :-( */ +static int pwc_atoi(const char *s) +{ + int k = 0; + + k = 0; + while (*s != '\0' && *s >= '0' && *s <= '9') { + k = 10 * k + (*s - '0'); + s++; + } + return k; +} + + +/* + * Initialization code & module stuff + */ + +static char size[10]; +static int fps = 0; +static int fbufs = 0; +static int mbufs = 0; +static int trace = -1; +static int compression = -1; +static int leds[2] = { -1, -1 }; +static char *dev_hint[MAX_DEV_HINTS] = { }; + +module_param_string(size, size, sizeof(size), 0); +MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga"); +module_param(fps, int, 0000); +MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30"); +module_param(fbufs, int, 0000); +MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve"); +module_param(mbufs, int, 0000); +MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers"); +module_param(trace, int, 0000); +MODULE_PARM_DESC(trace, "For debugging purposes"); +module_param(power_save, bool, 0000); +MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off"); +module_param(compression, int, 0000); +MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)"); +module_param_array(leds, int, NULL, 0000); +MODULE_PARM_DESC(leds, "LED on,off time in milliseconds"); +module_param_array(dev_hint, charp, NULL, 0000); +MODULE_PARM_DESC(dev_hint, "Device node hints"); + +MODULE_DESCRIPTION("Philips & OEM USB webcam driver"); +MODULE_AUTHOR("Luc Saillard <luc@saillard.org>"); +MODULE_LICENSE("GPL"); + +static int __init usb_pwc_init(void) +{ + int i, sz; + char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" }; + + Info("Philips webcam module version " PWC_VERSION " loaded.\n"); + Info("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n"); + Info("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n"); + Info("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n"); + + if (fps) { + if (fps < 4 || fps > 30) { + Err("Framerate out of bounds (4-30).\n"); + return -EINVAL; + } + default_fps = fps; + Info("Default framerate set to %d.\n", default_fps); + } + + if (size[0]) { + /* string; try matching with array */ + for (sz = 0; sz < PSZ_MAX; sz++) { + if (!strcmp(sizenames[sz], size)) { /* Found! */ + default_size = sz; + break; + } + } + if (sz == PSZ_MAX) { + Err("Size not recognized; try size=[sqcif | qsif | qcif | sif | cif | vga].\n"); + return -EINVAL; + } + Info("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y); + } + if (mbufs) { + if (mbufs < 1 || mbufs > MAX_IMAGES) { + Err("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES); + return -EINVAL; + } + default_mbufs = mbufs; + Info("Number of image buffers set to %d.\n", default_mbufs); + } + if (fbufs) { + if (fbufs < 2 || fbufs > MAX_FRAMES) { + Err("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES); + return -EINVAL; + } + default_fbufs = fbufs; + Info("Number of frame buffers set to %d.\n", default_fbufs); + } + if (trace >= 0) { + Info("Trace options: 0x%04x\n", trace); + pwc_trace = trace; + } + if (compression >= 0) { + if (compression > 3) { + Err("Invalid compression setting; use a number between 0 (uncompressed) and 3 (high).\n"); + return -EINVAL; + } + pwc_preferred_compression = compression; + Info("Preferred compression set to %d.\n", pwc_preferred_compression); + } + if (power_save) + Info("Enabling power save on open/close.\n"); + if (leds[0] >= 0) + led_on = leds[0]; + if (leds[1] >= 0) + led_off = leds[1]; + + /* Big device node whoopla. Basically, it allows you to assign a + device node (/dev/videoX) to a camera, based on its type + & serial number. The format is [type[.serialnumber]:]node. + + Any camera that isn't matched by these rules gets the next + available free device node. + */ + for (i = 0; i < MAX_DEV_HINTS; i++) { + char *s, *colon, *dot; + + /* This loop also initializes the array */ + device_hint[i].pdev = NULL; + s = dev_hint[i]; + if (s != NULL && *s != '\0') { + device_hint[i].type = -1; /* wildcard */ + strcpy(device_hint[i].serial_number, "*"); + + /* parse string: chop at ':' & '/' */ + colon = dot = s; + while (*colon != '\0' && *colon != ':') + colon++; + while (*dot != '\0' && *dot != '.') + dot++; + /* Few sanity checks */ + if (*dot != '\0' && dot > colon) { + Err("Malformed camera hint: the colon must be after the dot.\n"); + return -EINVAL; + } + + if (*colon == '\0') { + /* No colon */ + if (*dot != '\0') { + Err("Malformed camera hint: no colon + device node given.\n"); + return -EINVAL; + } + else { + /* No type or serial number specified, just a number. */ + device_hint[i].device_node = pwc_atoi(s); + } + } + else { + /* There's a colon, so we have at least a type and a device node */ + device_hint[i].type = pwc_atoi(s); + device_hint[i].device_node = pwc_atoi(colon + 1); + if (*dot != '\0') { + /* There's a serial number as well */ + int k; + + dot++; + k = 0; + while (*dot != ':' && k < 29) { + device_hint[i].serial_number[k++] = *dot; + dot++; + } + device_hint[i].serial_number[k] = '\0'; + } + } +#if PWC_DEBUG + Debug("device_hint[%d]:\n", i); + Debug(" type : %d\n", device_hint[i].type); + Debug(" serial# : %s\n", device_hint[i].serial_number); + Debug(" node : %d\n", device_hint[i].device_node); +#endif + } + else + device_hint[i].type = 0; /* not filled */ + } /* ..for MAX_DEV_HINTS */ + + Trace(TRACE_PROBE, "Registering driver at address 0x%p.\n", &pwc_driver); + return usb_register(&pwc_driver); +} + +static void __exit usb_pwc_exit(void) +{ + Trace(TRACE_MODULE, "Deregistering driver.\n"); + usb_deregister(&pwc_driver); + Info("Philips webcam module removed.\n"); +} + +module_init(usb_pwc_init); +module_exit(usb_pwc_exit); + diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h new file mode 100644 index 000000000000..784bc72521fa --- /dev/null +++ b/drivers/media/video/pwc/pwc-ioctl.h @@ -0,0 +1,292 @@ +#ifndef PWC_IOCTL_H +#define PWC_IOCTL_H + +/* (C) 2001-2004 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* This is pwc-ioctl.h belonging to PWC 8.12.1 + It contains structures and defines to communicate from user space + directly to the driver. + */ + +/* + Changes + 2001/08/03 Alvarado Added ioctl constants to access methods for + changing white balance and red/blue gains + 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE + 2003/12/13 Nemosft Unv. Some modifications to make interfacing to + PWCX easier + */ + +/* These are private ioctl() commands, specific for the Philips webcams. + They contain functions not found in other webcams, and settings not + specified in the Video4Linux API. + + The #define names are built up like follows: + VIDIOC VIDeo IOCtl prefix + PWC Philps WebCam + G optional: Get + S optional: Set + ... the function + */ + + + /* Enumeration of image sizes */ +#define PSZ_SQCIF 0x00 +#define PSZ_QSIF 0x01 +#define PSZ_QCIF 0x02 +#define PSZ_SIF 0x03 +#define PSZ_CIF 0x04 +#define PSZ_VGA 0x05 +#define PSZ_MAX 6 + + +/* The frame rate is encoded in the video_window.flags parameter using + the upper 16 bits, since some flags are defined nowadays. The following + defines provide a mask and shift to filter out this value. + + In 'Snapshot' mode the camera freezes its automatic exposure and colour + balance controls. + */ +#define PWC_FPS_SHIFT 16 +#define PWC_FPS_MASK 0x00FF0000 +#define PWC_FPS_FRMASK 0x003F0000 +#define PWC_FPS_SNAPSHOT 0x00400000 + + +/* structure for transferring x & y coordinates */ +struct pwc_coord +{ + int x, y; /* guess what */ + int size; /* size, or offset */ +}; + + +/* Used with VIDIOCPWCPROBE */ +struct pwc_probe +{ + char name[32]; + int type; +}; + +struct pwc_serial +{ + char serial[30]; /* String with serial number. Contains terminating 0 */ +}; + +/* pwc_whitebalance.mode values */ +#define PWC_WB_INDOOR 0 +#define PWC_WB_OUTDOOR 1 +#define PWC_WB_FL 2 +#define PWC_WB_MANUAL 3 +#define PWC_WB_AUTO 4 + +/* Used with VIDIOCPWC[SG]AWB (Auto White Balance). + Set mode to one of the PWC_WB_* values above. + *red and *blue are the respective gains of these colour components inside + the camera; range 0..65535 + When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; + otherwise undefined. + 'read_red' and 'read_blue' are read-only. +*/ +struct pwc_whitebalance +{ + int mode; + int manual_red, manual_blue; /* R/W */ + int read_red, read_blue; /* R/O */ +}; + +/* + 'control_speed' and 'control_delay' are used in automatic whitebalance mode, + and tell the camera how fast it should react to changes in lighting, and + with how much delay. Valid values are 0..65535. +*/ +struct pwc_wb_speed +{ + int control_speed; + int control_delay; + +}; + +/* Used with VIDIOCPWC[SG]LED */ +struct pwc_leds +{ + int led_on; /* Led on-time; range = 0..25000 */ + int led_off; /* Led off-time; range = 0..25000 */ +}; + +/* Image size (used with GREALSIZE) */ +struct pwc_imagesize +{ + int width; + int height; +}; + +/* Defines and structures for Motorized Pan & Tilt */ +#define PWC_MPT_PAN 0x01 +#define PWC_MPT_TILT 0x02 +#define PWC_MPT_TIMEOUT 0x04 /* for status */ + +/* Set angles; when absolute != 0, the angle is absolute and the + driver calculates the relative offset for you. This can only + be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns + absolute angles. + */ +struct pwc_mpt_angles +{ + int absolute; /* write-only */ + int pan; /* degrees * 100 */ + int tilt; /* degress * 100 */ +}; + +/* Range of angles of the camera, both horizontally and vertically. + */ +struct pwc_mpt_range +{ + int pan_min, pan_max; /* degrees * 100 */ + int tilt_min, tilt_max; +}; + +struct pwc_mpt_status +{ + int status; + int time_pan; + int time_tilt; +}; + + +/* This is used for out-of-kernel decompression. With it, you can get + all the necessary information to initialize and use the decompressor + routines in standalone applications. + */ +struct pwc_video_command +{ + int type; /* camera type (645, 675, 730, etc.) */ + int release; /* release number */ + + int size; /* one of PSZ_* */ + int alternate; + int command_len; /* length of USB video command */ + unsigned char command_buf[13]; /* Actual USB video command */ + int bandlength; /* >0 = compressed */ + int frame_size; /* Size of one (un)compressed frame */ +}; + +/* Flags for PWCX subroutines. Not all modules honour all flags. */ +#define PWCX_FLAG_PLANAR 0x0001 +#define PWCX_FLAG_BAYER 0x0008 + + +/* IOCTL definitions */ + + /* Restore user settings */ +#define VIDIOCPWCRUSER _IO('v', 192) + /* Save user settings */ +#define VIDIOCPWCSUSER _IO('v', 193) + /* Restore factory settings */ +#define VIDIOCPWCFACTORY _IO('v', 194) + + /* You can manipulate the compression factor. A compression preference of 0 + means use uncompressed modes when available; 1 is low compression, 2 is + medium and 3 is high compression preferred. Of course, the higher the + compression, the lower the bandwidth used but more chance of artefacts + in the image. The driver automatically chooses a higher compression when + the preferred mode is not available. + */ + /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */ +#define VIDIOCPWCSCQUAL _IOW('v', 195, int) + /* Get preferred compression quality */ +#define VIDIOCPWCGCQUAL _IOR('v', 195, int) + + +/* Retrieve serial number of camera */ +#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial) + + /* This is a probe function; since so many devices are supported, it + becomes difficult to include all the names in programs that want to + check for the enhanced Philips stuff. So in stead, try this PROBE; + it returns a structure with the original name, and the corresponding + Philips type. + To use, fill the structure with zeroes, call PROBE and if that succeeds, + compare the name with that returned from VIDIOCGCAP; they should be the + same. If so, you can be assured it is a Philips (OEM) cam and the type + is valid. + */ +#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe) + + /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */ +#define VIDIOCPWCSAGC _IOW('v', 200, int) + /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */ +#define VIDIOCPWCGAGC _IOR('v', 200, int) + /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */ +#define VIDIOCPWCSSHUTTER _IOW('v', 201, int) + + /* Color compensation (Auto White Balance) */ +#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance) +#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance) + + /* Auto WB speed */ +#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed) +#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed) + + /* LEDs on/off/blink; int range 0..65535 */ +#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds) +#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds) + + /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */ +#define VIDIOCPWCSCONTOUR _IOW('v', 206, int) +#define VIDIOCPWCGCONTOUR _IOR('v', 206, int) + + /* Backlight compensation; 0 = off, otherwise on */ +#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int) +#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int) + + /* Flickerless mode; = 0 off, otherwise on */ +#define VIDIOCPWCSFLICKER _IOW('v', 208, int) +#define VIDIOCPWCGFLICKER _IOR('v', 208, int) + + /* Dynamic noise reduction; 0 off, 3 = high noise reduction */ +#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int) +#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int) + + /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */ +#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize) + + /* Motorized pan & tilt functions */ +#define VIDIOCPWCMPTRESET _IOW('v', 211, int) +#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range) +#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles) +#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles) +#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status) + + /* Get the USB set-video command; needed for initializing libpwcx */ +#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command) +struct pwc_table_init_buffer { + int len; + char *buffer; + +}; +#define VIDIOCPWCGVIDTABLE _IOR('v', 216, struct pwc_table_init_buffer) + +#endif diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/video/pwc/pwc-kiara.c new file mode 100644 index 000000000000..4c96037f7be5 --- /dev/null +++ b/drivers/media/video/pwc/pwc-kiara.c @@ -0,0 +1,318 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + +/* This tables contains entries for the 730/740/750 (Kiara) camera, with + 4 different qualities (no compression, low, medium, high). + It lists the bandwidth requirements for said mode by its alternate interface + number. An alternate of 0 means that the mode is unavailable. + + There are 6 * 4 * 4 entries: + 6 different resolutions subqcif, qsif, qcif, sif, cif, vga + 6 framerates: 5, 10, 15, 20, 25, 30 + 4 compression modi: none, low, medium, high + + When an uncompressed mode is not available, the next available compressed mode + will be chosen (unless the decompressor is absent). Sometimes there are only + 1 or 2 compressed modes available; in that case entries are duplicated. +*/ + + +#include "pwc-kiara.h" +#include "pwc-uncompress.h" + +const struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4] = +{ + /* SQCIF */ + { + /* 5 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 10 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 15 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, + /* QSIF */ + { + /* 5 fps */ + { + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + {1, 146, 0, {0x1D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0x00, 0x80}}, + }, + /* 10 fps */ + { + {2, 291, 0, {0x1C, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0x01, 0x80}}, + {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}}, + {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}}, + {1, 192, 630, {0x14, 0xF4, 0x30, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xC0, 0x00, 0x80}}, + }, + /* 15 fps */ + { + {3, 437, 0, {0x1B, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x01, 0x80}}, + {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}}, + {2, 292, 640, {0x13, 0xF4, 0x30, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x20, 0x24, 0x01, 0x80}}, + {1, 192, 420, {0x13, 0xF4, 0x30, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x18, 0xC0, 0x00, 0x80}}, + }, + /* 20 fps */ + { + {4, 589, 0, {0x1A, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4D, 0x02, 0x80}}, + {3, 448, 730, {0x12, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xC0, 0x01, 0x80}}, + {2, 292, 476, {0x12, 0xF4, 0x30, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0x01, 0x80}}, + {1, 192, 312, {0x12, 0xF4, 0x50, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0x00, 0x80}}, + }, + /* 25 fps */ + { + {5, 703, 0, {0x19, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x02, 0x80}}, + {3, 447, 610, {0x11, 0xF4, 0x30, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x28, 0xBF, 0x01, 0x80}}, + {2, 292, 398, {0x11, 0xF4, 0x50, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x28, 0x24, 0x01, 0x80}}, + {1, 193, 262, {0x11, 0xF4, 0x50, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x28, 0xC1, 0x00, 0x80}}, + }, + /* 30 fps */ + { + {8, 874, 0, {0x18, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x6A, 0x03, 0x80}}, + {5, 704, 730, {0x10, 0xF4, 0x30, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x28, 0xC0, 0x02, 0x80}}, + {3, 448, 492, {0x10, 0xF4, 0x30, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x28, 0xC0, 0x01, 0x80}}, + {2, 292, 320, {0x10, 0xF4, 0x50, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x28, 0x24, 0x01, 0x80}}, + }, + }, + /* QCIF */ + { + /* 5 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 10 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 15 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, + /* SIF */ + { + /* 5 fps */ + { + {4, 582, 0, {0x0D, 0xF4, 0x30, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x02, 0x80}}, + {3, 387, 1276, {0x05, 0xF4, 0x30, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x01, 0x80}}, + {2, 291, 960, {0x05, 0xF4, 0x30, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0x01, 0x80}}, + {1, 191, 630, {0x05, 0xF4, 0x50, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x18, 0xBF, 0x00, 0x80}}, + }, + /* 10 fps */ + { + {0, }, + {6, 775, 1278, {0x04, 0xF4, 0x30, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x03, 0x80}}, + {3, 447, 736, {0x04, 0xF4, 0x30, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x28, 0xBF, 0x01, 0x80}}, + {2, 292, 480, {0x04, 0xF4, 0x70, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x28, 0x24, 0x01, 0x80}}, + }, + /* 15 fps */ + { + {0, }, + {9, 955, 1050, {0x03, 0xF4, 0x30, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x03, 0x80}}, + {4, 592, 650, {0x03, 0xF4, 0x30, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x50, 0x02, 0x80}}, + {3, 448, 492, {0x03, 0xF4, 0x50, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x38, 0xC0, 0x01, 0x80}}, + }, + /* 20 fps */ + { + {0, }, + {9, 958, 782, {0x02, 0xF4, 0x30, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x03, 0x80}}, + {5, 703, 574, {0x02, 0xF4, 0x50, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x02, 0x80}}, + {3, 446, 364, {0x02, 0xF4, 0x90, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x38, 0xBE, 0x01, 0x80}}, + }, + /* 25 fps */ + { + {0, }, + {9, 958, 654, {0x01, 0xF4, 0x30, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x03, 0x80}}, + {6, 776, 530, {0x01, 0xF4, 0x50, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x03, 0x80}}, + {4, 592, 404, {0x01, 0xF4, 0x70, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x48, 0x50, 0x02, 0x80}}, + }, + /* 30 fps */ + { + {0, }, + {9, 957, 526, {0x00, 0xF4, 0x50, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x03, 0x80}}, + {6, 775, 426, {0x00, 0xF4, 0x70, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x03, 0x80}}, + {4, 590, 324, {0x00, 0x7A, 0x88, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x50, 0x4E, 0x02, 0x80}}, + }, + }, + /* CIF */ + { + /* 5 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 10 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 15 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, + /* VGA */ + { + /* 5 fps */ + { + {0, }, + {6, 773, 1272, {0x25, 0xF4, 0x30, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x03, 0x80}}, + {4, 592, 976, {0x25, 0xF4, 0x50, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x02, 0x80}}, + {3, 448, 738, {0x25, 0xF4, 0x90, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x01, 0x80}}, + }, + /* 10 fps */ + { + {0, }, + {9, 956, 788, {0x24, 0xF4, 0x70, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x03, 0x80}}, + {6, 776, 640, {0x24, 0xF4, 0xB0, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x03, 0x80}}, + {4, 592, 488, {0x24, 0x7A, 0xE8, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x02, 0x80}}, + }, + /* 15 fps */ + { + {0, }, + {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}}, + {9, 957, 526, {0x23, 0x7A, 0xE8, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x03, 0x80}}, + {8, 895, 492, {0x23, 0x7A, 0xE8, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x03, 0x80}}, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, +}; + diff --git a/drivers/media/video/pwc/pwc-kiara.h b/drivers/media/video/pwc/pwc-kiara.h new file mode 100644 index 000000000000..12929abbb1f0 --- /dev/null +++ b/drivers/media/video/pwc/pwc-kiara.h @@ -0,0 +1,45 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* Entries for the Kiara (730/740/750) camera */ + +#ifndef PWC_KIARA_H +#define PWC_KIARA_H + +#include "pwc-ioctl.h" + +struct Kiara_table_entry +{ + char alternate; /* USB alternate interface */ + unsigned short packetsize; /* Normal packet size */ + unsigned short bandlength; /* Bandlength when decompressing */ + unsigned char mode[12]; /* precomputed mode settings for cam */ +}; + +const extern struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4]; +const extern unsigned int KiaraRomTable[8][2][16][8]; + +#endif + + diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c new file mode 100644 index 000000000000..58fe79747992 --- /dev/null +++ b/drivers/media/video/pwc/pwc-misc.c @@ -0,0 +1,140 @@ +/* Linux driver for Philips webcam + Various miscellaneous functions and tables. + (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/slab.h> + +#include "pwc.h" + +struct pwc_coord pwc_image_sizes[PSZ_MAX] = +{ + { 128, 96, 0 }, + { 160, 120, 0 }, + { 176, 144, 0 }, + { 320, 240, 0 }, + { 352, 288, 0 }, + { 640, 480, 0 }, +}; + +/* x,y -> PSZ_ */ +int pwc_decode_size(struct pwc_device *pdev, int width, int height) +{ + int i, find; + + /* Make sure we don't go beyond our max size. + NB: we have different limits for RAW and normal modes. In case + you don't have the decompressor loaded or use RAW mode, + the maximum viewable size is smaller. + */ + if (pdev->vpalette == VIDEO_PALETTE_RAW) + { + if (width > pdev->abs_max.x || height > pdev->abs_max.y) + { + Debug("VIDEO_PALETTE_RAW: going beyond abs_max.\n"); + return -1; + } + } + else + { + if (width > pdev->view_max.x || height > pdev->view_max.y) + { + Debug("VIDEO_PALETTE_ not RAW: going beyond view_max.\n"); + return -1; + } + } + + /* Find the largest size supported by the camera that fits into the + requested size. + */ + find = -1; + for (i = 0; i < PSZ_MAX; i++) { + if (pdev->image_mask & (1 << i)) { + if (pwc_image_sizes[i].x <= width && pwc_image_sizes[i].y <= height) + find = i; + } + } + return find; +} + +/* initialize variables depending on type and decompressor*/ +void pwc_construct(struct pwc_device *pdev) +{ + switch(pdev->type) { + case 645: + case 646: + pdev->view_min.x = 128; + pdev->view_min.y = 96; + pdev->view_max.x = 352; + pdev->view_max.y = 288; + pdev->abs_max.x = 352; + pdev->abs_max.y = 288; + pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QCIF | 1 << PSZ_CIF; + pdev->vcinterface = 2; + pdev->vendpoint = 4; + pdev->frame_header_size = 0; + pdev->frame_trailer_size = 0; + break; + case 675: + case 680: + case 690: + pdev->view_min.x = 128; + pdev->view_min.y = 96; + /* Anthill bug #38: PWC always reports max size, even without PWCX */ + pdev->view_max.x = 640; + pdev->view_max.y = 480; + pdev->image_mask = 1 << PSZ_SQCIF | 1 << PSZ_QSIF | 1 << PSZ_QCIF | 1 << PSZ_SIF | 1 << PSZ_CIF | 1 << PSZ_VGA; + pdev->abs_max.x = 640; + pdev->abs_max.y = 480; + pdev->vcinterface = 3; + pdev->vendpoint = 4; + pdev->frame_header_size = 0; + pdev->frame_trailer_size = 0; + break; + case 720: + case 730: + case 740: + case 750: + pdev->view_min.x = 160; + pdev->view_min.y = 120; + pdev->view_max.x = 640; + pdev->view_max.y = 480; + pdev->image_mask = 1 << PSZ_QSIF | 1 << PSZ_SIF | 1 << PSZ_VGA; + pdev->abs_max.x = 640; + pdev->abs_max.y = 480; + pdev->vcinterface = 3; + pdev->vendpoint = 5; + pdev->frame_header_size = TOUCAM_HEADER_SIZE; + pdev->frame_trailer_size = TOUCAM_TRAILER_SIZE; + break; + } + Debug("type = %d\n",pdev->type); + pdev->vpalette = VIDEO_PALETTE_YUV420P; /* default */ + pdev->view_min.size = pdev->view_min.x * pdev->view_min.y; + pdev->view_max.size = pdev->view_max.x * pdev->view_max.y; + /* length of image, in YUV format; always allocate enough memory. */ + pdev->len_per_image = (pdev->abs_max.x * pdev->abs_max.y * 3) / 2; +} + + diff --git a/drivers/media/video/pwc/pwc-nala.h b/drivers/media/video/pwc/pwc-nala.h new file mode 100644 index 000000000000..168c73ef75d8 --- /dev/null +++ b/drivers/media/video/pwc/pwc-nala.h @@ -0,0 +1,66 @@ + /* SQCIF */ + { + {0, 0, {0x04, 0x01, 0x03}}, + {8, 0, {0x05, 0x01, 0x03}}, + {7, 0, {0x08, 0x01, 0x03}}, + {7, 0, {0x0A, 0x01, 0x03}}, + {6, 0, {0x0C, 0x01, 0x03}}, + {5, 0, {0x0F, 0x01, 0x03}}, + {4, 0, {0x14, 0x01, 0x03}}, + {3, 0, {0x18, 0x01, 0x03}}, + }, + /* QSIF */ + { + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + }, + /* QCIF */ + { + {0, 0, {0x04, 0x01, 0x02}}, + {8, 0, {0x05, 0x01, 0x02}}, + {7, 0, {0x08, 0x01, 0x02}}, + {6, 0, {0x0A, 0x01, 0x02}}, + {5, 0, {0x0C, 0x01, 0x02}}, + {4, 0, {0x0F, 0x01, 0x02}}, + {1, 0, {0x14, 0x01, 0x02}}, + {1, 0, {0x18, 0x01, 0x02}}, + }, + /* SIF */ + { + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + }, + /* CIF */ + { + {4, 0, {0x04, 0x01, 0x01}}, + {7, 1, {0x05, 0x03, 0x01}}, + {6, 1, {0x08, 0x03, 0x01}}, + {4, 1, {0x0A, 0x03, 0x01}}, + {3, 1, {0x0C, 0x03, 0x01}}, + {2, 1, {0x0F, 0x03, 0x01}}, + {0}, + {0}, + }, + /* VGA */ + { + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + {0}, + }, diff --git a/drivers/media/video/pwc/pwc-timon.c b/drivers/media/video/pwc/pwc-timon.c new file mode 100644 index 000000000000..175250d089cf --- /dev/null +++ b/drivers/media/video/pwc/pwc-timon.c @@ -0,0 +1,316 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + +/* This tables contains entries for the 675/680/690 (Timon) camera, with + 4 different qualities (no compression, low, medium, high). + It lists the bandwidth requirements for said mode by its alternate interface + number. An alternate of 0 means that the mode is unavailable. + + There are 6 * 4 * 4 entries: + 6 different resolutions subqcif, qsif, qcif, sif, cif, vga + 6 framerates: 5, 10, 15, 20, 25, 30 + 4 compression modi: none, low, medium, high + + When an uncompressed mode is not available, the next available compressed mode + will be chosen (unless the decompressor is absent). Sometimes there are only + 1 or 2 compressed modes available; in that case entries are duplicated. +*/ + +#include "pwc-timon.h" + +const struct Timon_table_entry Timon_table[PSZ_MAX][6][4] = +{ + /* SQCIF */ + { + /* 5 fps */ + { + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + {1, 140, 0, {0x05, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x8C, 0xFC, 0x80, 0x02}}, + }, + /* 10 fps */ + { + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + {2, 280, 0, {0x04, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x18, 0xA9, 0x80, 0x02}}, + }, + /* 15 fps */ + { + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + {3, 410, 0, {0x03, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x9A, 0x71, 0x80, 0x02}}, + }, + /* 20 fps */ + { + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + {4, 559, 0, {0x02, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x2F, 0x56, 0x80, 0x02}}, + }, + /* 25 fps */ + { + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + {5, 659, 0, {0x01, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x93, 0x46, 0x80, 0x02}}, + }, + /* 30 fps */ + { + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + {7, 838, 0, {0x00, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x13, 0x00, 0x46, 0x3B, 0x80, 0x02}}, + }, + }, + /* QSIF */ + { + /* 5 fps */ + { + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + {1, 146, 0, {0x2D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x92, 0xFC, 0xC0, 0x02}}, + }, + /* 10 fps */ + { + {2, 291, 0, {0x2C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x23, 0xA1, 0xC0, 0x02}}, + {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + {1, 191, 630, {0x2C, 0xF4, 0x05, 0x13, 0xA9, 0x12, 0xE1, 0x17, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + }, + /* 15 fps */ + { + {3, 437, 0, {0x2B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xB5, 0x6D, 0xC0, 0x02}}, + {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {2, 291, 640, {0x2B, 0xF4, 0x05, 0x13, 0xF7, 0x13, 0x2F, 0x13, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {1, 191, 420, {0x2B, 0xF4, 0x0D, 0x0D, 0x1B, 0x0C, 0x53, 0x1E, 0x08, 0xBF, 0xF4, 0xC0, 0x02}}, + }, + /* 20 fps */ + { + {4, 588, 0, {0x2A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x4C, 0x52, 0xC0, 0x02}}, + {3, 447, 730, {0x2A, 0xF4, 0x05, 0x16, 0xC9, 0x16, 0x01, 0x0E, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 476, {0x2A, 0xF4, 0x0D, 0x0E, 0xD8, 0x0E, 0x10, 0x19, 0x18, 0x24, 0xA1, 0xC0, 0x02}}, + {1, 192, 312, {0x2A, 0xF4, 0x1D, 0x09, 0xB3, 0x08, 0xEB, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}}, + }, + /* 25 fps */ + { + {5, 703, 0, {0x29, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xBF, 0x42, 0xC0, 0x02}}, + {3, 447, 610, {0x29, 0xF4, 0x05, 0x13, 0x0B, 0x12, 0x43, 0x14, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 398, {0x29, 0xF4, 0x0D, 0x0C, 0x6C, 0x0B, 0xA4, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}}, + {1, 192, 262, {0x29, 0xF4, 0x25, 0x08, 0x23, 0x07, 0x5B, 0x1E, 0x18, 0xC0, 0xF4, 0xC0, 0x02}}, + }, + /* 30 fps */ + { + {8, 873, 0, {0x28, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x69, 0x37, 0xC0, 0x02}}, + {5, 704, 774, {0x28, 0xF4, 0x05, 0x18, 0x21, 0x17, 0x59, 0x0F, 0x18, 0xC0, 0x42, 0xC0, 0x02}}, + {3, 448, 492, {0x28, 0xF4, 0x05, 0x0F, 0x5D, 0x0E, 0x95, 0x15, 0x18, 0xC0, 0x69, 0xC0, 0x02}}, + {2, 291, 320, {0x28, 0xF4, 0x1D, 0x09, 0xFB, 0x09, 0x33, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}}, + }, + }, + /* QCIF */ + { + /* 5 fps */ + { + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + {1, 193, 0, {0x0D, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xC1, 0xF4, 0xC0, 0x02}}, + }, + /* 10 fps */ + { + {3, 385, 0, {0x0C, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x81, 0x79, 0xC0, 0x02}}, + {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {2, 291, 800, {0x0C, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x11, 0x08, 0x23, 0xA1, 0xC0, 0x02}}, + {1, 194, 532, {0x0C, 0xF4, 0x05, 0x10, 0x9A, 0x0F, 0xBE, 0x1B, 0x08, 0xC2, 0xF0, 0xC0, 0x02}}, + }, + /* 15 fps */ + { + {4, 577, 0, {0x0B, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x41, 0x52, 0xC0, 0x02}}, + {3, 447, 818, {0x0B, 0xF4, 0x05, 0x19, 0x89, 0x18, 0xAD, 0x0F, 0x10, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 534, {0x0B, 0xF4, 0x05, 0x10, 0xA3, 0x0F, 0xC7, 0x19, 0x10, 0x24, 0xA1, 0xC0, 0x02}}, + {1, 195, 356, {0x0B, 0xF4, 0x15, 0x0B, 0x11, 0x0A, 0x35, 0x1E, 0x10, 0xC3, 0xF0, 0xC0, 0x02}}, + }, + /* 20 fps */ + { + {6, 776, 0, {0x0A, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0x08, 0x3F, 0xC0, 0x02}}, + {4, 591, 804, {0x0A, 0xF4, 0x05, 0x19, 0x1E, 0x18, 0x42, 0x0F, 0x18, 0x4F, 0x4E, 0xC0, 0x02}}, + {3, 447, 608, {0x0A, 0xF4, 0x05, 0x12, 0xFD, 0x12, 0x21, 0x15, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 291, 396, {0x0A, 0xF4, 0x15, 0x0C, 0x5E, 0x0B, 0x82, 0x1E, 0x18, 0x23, 0xA1, 0xC0, 0x02}}, + }, + /* 25 fps */ + { + {9, 928, 0, {0x09, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x12, 0x00, 0xA0, 0x33, 0xC0, 0x02}}, + {5, 703, 800, {0x09, 0xF4, 0x05, 0x18, 0xF4, 0x18, 0x18, 0x10, 0x18, 0xBF, 0x42, 0xC0, 0x02}}, + {3, 447, 508, {0x09, 0xF4, 0x0D, 0x0F, 0xD2, 0x0E, 0xF6, 0x1B, 0x18, 0xBF, 0x69, 0xC0, 0x02}}, + {2, 292, 332, {0x09, 0xF4, 0x1D, 0x0A, 0x5A, 0x09, 0x7E, 0x1E, 0x18, 0x24, 0xA1, 0xC0, 0x02}}, + }, + /* 30 fps */ + { + {0, }, + {9, 956, 876, {0x08, 0xF4, 0x05, 0x1B, 0x58, 0x1A, 0x7C, 0x0E, 0x20, 0xBC, 0x33, 0x10, 0x02}}, + {4, 592, 542, {0x08, 0xF4, 0x05, 0x10, 0xE4, 0x10, 0x08, 0x17, 0x20, 0x50, 0x4E, 0x10, 0x02}}, + {2, 291, 266, {0x08, 0xF4, 0x25, 0x08, 0x48, 0x07, 0x6C, 0x1E, 0x20, 0x23, 0xA1, 0x10, 0x02}}, + }, + }, + /* SIF */ + { + /* 5 fps */ + { + {4, 582, 0, {0x35, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x46, 0x52, 0x60, 0x02}}, + {3, 387, 1276, {0x35, 0xF4, 0x05, 0x27, 0xD8, 0x26, 0x48, 0x03, 0x10, 0x83, 0x79, 0x60, 0x02}}, + {2, 291, 960, {0x35, 0xF4, 0x0D, 0x1D, 0xF2, 0x1C, 0x62, 0x04, 0x10, 0x23, 0xA1, 0x60, 0x02}}, + {1, 191, 630, {0x35, 0xF4, 0x1D, 0x13, 0xA9, 0x12, 0x19, 0x05, 0x08, 0xBF, 0xF4, 0x60, 0x02}}, + }, + /* 10 fps */ + { + {0, }, + {6, 775, 1278, {0x34, 0xF4, 0x05, 0x27, 0xE8, 0x26, 0x58, 0x05, 0x30, 0x07, 0x3F, 0x10, 0x02}}, + {3, 447, 736, {0x34, 0xF4, 0x15, 0x16, 0xFB, 0x15, 0x6B, 0x05, 0x18, 0xBF, 0x69, 0x10, 0x02}}, + {2, 291, 480, {0x34, 0xF4, 0x2D, 0x0E, 0xF9, 0x0D, 0x69, 0x09, 0x18, 0x23, 0xA1, 0x10, 0x02}}, + }, + /* 15 fps */ + { + {0, }, + {9, 955, 1050, {0x33, 0xF4, 0x05, 0x20, 0xCF, 0x1F, 0x3F, 0x06, 0x48, 0xBB, 0x33, 0x10, 0x02}}, + {4, 591, 650, {0x33, 0xF4, 0x15, 0x14, 0x44, 0x12, 0xB4, 0x08, 0x30, 0x4F, 0x4E, 0x10, 0x02}}, + {3, 448, 492, {0x33, 0xF4, 0x25, 0x0F, 0x52, 0x0D, 0xC2, 0x09, 0x28, 0xC0, 0x69, 0x10, 0x02}}, + }, + /* 20 fps */ + { + {0, }, + {9, 958, 782, {0x32, 0xF4, 0x0D, 0x18, 0x6A, 0x16, 0xDA, 0x0B, 0x58, 0xBE, 0x33, 0xD0, 0x02}}, + {5, 703, 574, {0x32, 0xF4, 0x1D, 0x11, 0xE7, 0x10, 0x57, 0x0B, 0x40, 0xBF, 0x42, 0xD0, 0x02}}, + {3, 446, 364, {0x32, 0xF4, 0x3D, 0x0B, 0x5C, 0x09, 0xCC, 0x0E, 0x30, 0xBE, 0x69, 0xD0, 0x02}}, + }, + /* 25 fps */ + { + {0, }, + {9, 958, 654, {0x31, 0xF4, 0x15, 0x14, 0x66, 0x12, 0xD6, 0x0B, 0x50, 0xBE, 0x33, 0x90, 0x02}}, + {6, 776, 530, {0x31, 0xF4, 0x25, 0x10, 0x8C, 0x0E, 0xFC, 0x0C, 0x48, 0x08, 0x3F, 0x90, 0x02}}, + {4, 592, 404, {0x31, 0xF4, 0x35, 0x0C, 0x96, 0x0B, 0x06, 0x0B, 0x38, 0x50, 0x4E, 0x90, 0x02}}, + }, + /* 30 fps */ + { + {0, }, + {9, 957, 526, {0x30, 0xF4, 0x25, 0x10, 0x68, 0x0E, 0xD8, 0x0D, 0x58, 0xBD, 0x33, 0x60, 0x02}}, + {6, 775, 426, {0x30, 0xF4, 0x35, 0x0D, 0x48, 0x0B, 0xB8, 0x0F, 0x50, 0x07, 0x3F, 0x60, 0x02}}, + {4, 590, 324, {0x30, 0x7A, 0x4B, 0x0A, 0x1C, 0x08, 0xB4, 0x0E, 0x40, 0x4E, 0x52, 0x60, 0x02}}, + }, + }, + /* CIF */ + { + /* 5 fps */ + { + {6, 771, 0, {0x15, 0xF4, 0x04, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x03, 0x3F, 0x80, 0x02}}, + {4, 465, 1278, {0x15, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x03, 0x18, 0xD1, 0x65, 0x80, 0x02}}, + {2, 291, 800, {0x15, 0xF4, 0x15, 0x18, 0xF4, 0x17, 0x3C, 0x05, 0x18, 0x23, 0xA1, 0x80, 0x02}}, + {1, 193, 528, {0x15, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x18, 0xC1, 0xF4, 0x80, 0x02}}, + }, + /* 10 fps */ + { + {0, }, + {9, 932, 1278, {0x14, 0xF4, 0x05, 0x27, 0xEE, 0x26, 0x36, 0x04, 0x30, 0xA4, 0x33, 0x10, 0x02}}, + {4, 591, 812, {0x14, 0xF4, 0x15, 0x19, 0x56, 0x17, 0x9E, 0x06, 0x28, 0x4F, 0x4E, 0x10, 0x02}}, + {2, 291, 400, {0x14, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x28, 0x23, 0xA1, 0x10, 0x02}}, + }, + /* 15 fps */ + { + {0, }, + {9, 956, 876, {0x13, 0xF4, 0x0D, 0x1B, 0x58, 0x19, 0xA0, 0x05, 0x38, 0xBC, 0x33, 0x60, 0x02}}, + {5, 703, 644, {0x13, 0xF4, 0x1D, 0x14, 0x1C, 0x12, 0x64, 0x08, 0x38, 0xBF, 0x42, 0x60, 0x02}}, + {3, 448, 410, {0x13, 0xF4, 0x3D, 0x0C, 0xC4, 0x0B, 0x0C, 0x0E, 0x38, 0xC0, 0x69, 0x60, 0x02}}, + }, + /* 20 fps */ + { + {0, }, + {9, 956, 650, {0x12, 0xF4, 0x1D, 0x14, 0x4A, 0x12, 0x92, 0x09, 0x48, 0xBC, 0x33, 0x10, 0x03}}, + {6, 776, 528, {0x12, 0xF4, 0x2D, 0x10, 0x7E, 0x0E, 0xC6, 0x0A, 0x40, 0x08, 0x3F, 0x10, 0x03}}, + {4, 591, 402, {0x12, 0xF4, 0x3D, 0x0C, 0x8F, 0x0A, 0xD7, 0x0E, 0x40, 0x4F, 0x4E, 0x10, 0x03}}, + }, + /* 25 fps */ + { + {0, }, + {9, 956, 544, {0x11, 0xF4, 0x25, 0x10, 0xF4, 0x0F, 0x3C, 0x0A, 0x48, 0xBC, 0x33, 0xC0, 0x02}}, + {7, 840, 478, {0x11, 0xF4, 0x2D, 0x0E, 0xEB, 0x0D, 0x33, 0x0B, 0x48, 0x48, 0x3B, 0xC0, 0x02}}, + {5, 703, 400, {0x11, 0xF4, 0x3D, 0x0C, 0x7A, 0x0A, 0xC2, 0x0E, 0x48, 0xBF, 0x42, 0xC0, 0x02}}, + }, + /* 30 fps */ + { + {0, }, + {9, 956, 438, {0x10, 0xF4, 0x35, 0x0D, 0xAC, 0x0B, 0xF4, 0x0D, 0x50, 0xBC, 0x33, 0x10, 0x02}}, + {7, 838, 384, {0x10, 0xF4, 0x45, 0x0B, 0xFD, 0x0A, 0x45, 0x0F, 0x50, 0x46, 0x3B, 0x10, 0x02}}, + {6, 773, 354, {0x10, 0x7A, 0x4B, 0x0B, 0x0C, 0x09, 0x80, 0x10, 0x50, 0x05, 0x3F, 0x10, 0x02}}, + }, + }, + /* VGA */ + { + /* 5 fps */ + { + {0, }, + {6, 773, 1272, {0x1D, 0xF4, 0x15, 0x27, 0xB6, 0x24, 0x96, 0x02, 0x30, 0x05, 0x3F, 0x10, 0x02}}, + {4, 592, 976, {0x1D, 0xF4, 0x25, 0x1E, 0x78, 0x1B, 0x58, 0x03, 0x30, 0x50, 0x4E, 0x10, 0x02}}, + {3, 448, 738, {0x1D, 0xF4, 0x3D, 0x17, 0x0C, 0x13, 0xEC, 0x04, 0x30, 0xC0, 0x69, 0x10, 0x02}}, + }, + /* 10 fps */ + { + {0, }, + {9, 956, 788, {0x1C, 0xF4, 0x35, 0x18, 0x9C, 0x15, 0x7C, 0x03, 0x48, 0xBC, 0x33, 0x10, 0x02}}, + {6, 776, 640, {0x1C, 0x7A, 0x53, 0x13, 0xFC, 0x11, 0x2C, 0x04, 0x48, 0x08, 0x3F, 0x10, 0x02}}, + {4, 592, 488, {0x1C, 0x7A, 0x6B, 0x0F, 0x3C, 0x0C, 0x6C, 0x06, 0x48, 0x50, 0x4E, 0x10, 0x02}}, + }, + /* 15 fps */ + { + {0, }, + {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}}, + {9, 957, 526, {0x1B, 0x7A, 0x63, 0x10, 0x68, 0x0D, 0x98, 0x06, 0x58, 0xBD, 0x33, 0x80, 0x02}}, + {8, 895, 492, {0x1B, 0x7A, 0x6B, 0x0F, 0x5D, 0x0C, 0x8D, 0x06, 0x58, 0x7F, 0x37, 0x80, 0x02}}, + }, + /* 20 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 25 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + /* 30 fps */ + { + {0, }, + {0, }, + {0, }, + {0, }, + }, + }, +}; + diff --git a/drivers/media/video/pwc/pwc-timon.h b/drivers/media/video/pwc/pwc-timon.h new file mode 100644 index 000000000000..a86b3782a081 --- /dev/null +++ b/drivers/media/video/pwc/pwc-timon.h @@ -0,0 +1,61 @@ +/* Linux driver for Philips webcam + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + + +/* This tables contains entries for the 675/680/690 (Timon) camera, with + 4 different qualities (no compression, low, medium, high). + It lists the bandwidth requirements for said mode by its alternate interface + number. An alternate of 0 means that the mode is unavailable. + + There are 6 * 4 * 4 entries: + 6 different resolutions subqcif, qsif, qcif, sif, cif, vga + 6 framerates: 5, 10, 15, 20, 25, 30 + 4 compression modi: none, low, medium, high + + When an uncompressed mode is not available, the next available compressed mode + will be chosen (unless the decompressor is absent). Sometimes there are only + 1 or 2 compressed modes available; in that case entries are duplicated. +*/ + +#ifndef PWC_TIMON_H +#define PWC_TIMON_H + +#include "pwc-ioctl.h" + +struct Timon_table_entry +{ + char alternate; /* USB alternate interface */ + unsigned short packetsize; /* Normal packet size */ + unsigned short bandlength; /* Bandlength when decompressing */ + unsigned char mode[13]; /* precomputed mode settings for cam */ +}; + +const extern struct Timon_table_entry Timon_table[PSZ_MAX][6][4]; +const extern unsigned int TimonRomTable [16][2][16][8]; + + +#endif + + diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c new file mode 100644 index 000000000000..b37a89a163f9 --- /dev/null +++ b/drivers/media/video/pwc/pwc-uncompress.c @@ -0,0 +1,146 @@ +/* Linux driver for Philips webcam + Decompression frontend. + (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <asm/current.h> +#include <asm/types.h> + +#include "pwc.h" +#include "pwc-uncompress.h" + +int pwc_decompress(struct pwc_device *pdev) +{ + struct pwc_frame_buf *fbuf; + int n, line, col, stride; + void *yuv, *image; + u16 *src; + u16 *dsty, *dstu, *dstv; + + if (pdev == NULL) + return -EFAULT; +#if defined(__KERNEL__) && defined(PWC_MAGIC) + if (pdev->magic != PWC_MAGIC) { + Err("pwc_decompress(): magic failed.\n"); + return -EFAULT; + } +#endif + + fbuf = pdev->read_frame; + if (fbuf == NULL) + return -EFAULT; + image = pdev->image_ptr[pdev->fill_image]; + if (!image) + return -EFAULT; + + yuv = fbuf->data + pdev->frame_header_size; /* Skip header */ + + /* Raw format; that's easy... */ + if (pdev->vpalette == VIDEO_PALETTE_RAW) + { + memcpy(image, yuv, pdev->frame_size); + return 0; + } + + if (pdev->vbandlength == 0) { + /* Uncompressed mode. We copy the data into the output buffer, + using the viewport size (which may be larger than the image + size). Unfortunately we have to do a bit of byte stuffing + to get the desired output format/size. + */ + /* + * We do some byte shuffling here to go from the + * native format to YUV420P. + */ + src = (u16 *)yuv; + n = pdev->view.x * pdev->view.y; + + /* offset in Y plane */ + stride = pdev->view.x * pdev->offset.y + pdev->offset.x; + dsty = (u16 *)(image + stride); + + /* offsets in U/V planes */ + stride = pdev->view.x * pdev->offset.y / 4 + pdev->offset.x / 2; + dstu = (u16 *)(image + n + stride); + dstv = (u16 *)(image + n + n / 4 + stride); + + /* increment after each line */ + stride = (pdev->view.x - pdev->image.x) / 2; /* u16 is 2 bytes */ + + for (line = 0; line < pdev->image.y; line++) { + for (col = 0; col < pdev->image.x; col += 4) { + *dsty++ = *src++; + *dsty++ = *src++; + if (line & 1) + *dstv++ = *src++; + else + *dstu++ = *src++; + } + dsty += stride; + if (line & 1) + dstv += (stride >> 1); + else + dstu += (stride >> 1); + } + } + else { + /* Compressed; the decompressor routines will write the data + in planar format immediately. + */ + int flags; + + flags = PWCX_FLAG_PLANAR; + if (pdev->vsize == PSZ_VGA && pdev->vframes == 5 && pdev->vsnapshot) + { + printk(KERN_ERR "pwc: Mode Bayer is not supported for now\n"); + flags |= PWCX_FLAG_BAYER; + return -ENXIO; /* No such device or address: missing decompressor */ + } + +#if 0 + switch (pdev->type) + { + case 675: + case 680: + case 690: + case 720: + case 730: + case 740: + case 750: + pwc_dec23_decompress(&pdev->image, &pdev->view, + &pdev->offset, yuv, image, flags, + pdev->decompress_data, pdev->vbandlength); + break; + case 645: + case 646: + /* TODO & FIXME */ + return -ENXIO; /* Missing decompressor */ + break; + } +#endif + } + return 0; +} + + diff --git a/drivers/media/video/pwc/pwc-uncompress.h b/drivers/media/video/pwc/pwc-uncompress.h new file mode 100644 index 000000000000..f75e1b6cbe19 --- /dev/null +++ b/drivers/media/video/pwc/pwc-uncompress.h @@ -0,0 +1,41 @@ +/* (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +/* This file is the bridge between the kernel module and the plugin; it + describes the structures and datatypes used in both modules. Any + significant change should be reflected by increasing the + pwc_decompressor_version major number. + */ +#ifndef PWC_UNCOMPRESS_H +#define PWC_UNCOMPRESS_H + +#include <linux/config.h> + +#include "pwc-ioctl.h" + +/* from pwc-dec.h */ +#define PWCX_FLAG_PLANAR 0x0001 +/* */ + +#endif diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h new file mode 100644 index 000000000000..1b0ee0ced0ed --- /dev/null +++ b/drivers/media/video/pwc/pwc.h @@ -0,0 +1,272 @@ +/* (C) 1999-2003 Nemosoft Unv. + (C) 2004 Luc Saillard (luc@saillard.org) + + NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx + driver and thus may have bugs that are not present in the original version. + Please send bug reports and support requests to <luc@saillard.org>. + The decompression routines have been implemented by reverse-engineering the + Nemosoft binary pwcx module. Caveat emptor. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#ifndef PWC_H +#define PWC_H + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/spinlock.h> +#include <linux/videodev.h> +#include <linux/wait.h> +#include <linux/smp_lock.h> +#include <asm/semaphore.h> +#include <asm/errno.h> + +#include "pwc-uncompress.h" +#include "pwc-ioctl.h" + +/* Defines and structures for the Philips webcam */ +/* Used for checking memory corruption/pointer validation */ +#define PWC_MAGIC 0x89DC10ABUL +#undef PWC_MAGIC + +/* Turn some debugging options on/off */ +#define PWC_DEBUG 0 + +/* Trace certain actions in the driver */ +#define TRACE_MODULE 0x0001 +#define TRACE_PROBE 0x0002 +#define TRACE_OPEN 0x0004 +#define TRACE_READ 0x0008 +#define TRACE_MEMORY 0x0010 +#define TRACE_FLOW 0x0020 +#define TRACE_SIZE 0x0040 +#define TRACE_PWCX 0x0080 +#define TRACE_SEQUENCE 0x1000 + +#define Trace(R, A...) if (pwc_trace & R) printk(KERN_DEBUG PWC_NAME " " A) +#define Debug(A...) printk(KERN_DEBUG PWC_NAME " " A) +#define Info(A...) printk(KERN_INFO PWC_NAME " " A) +#define Err(A...) printk(KERN_ERR PWC_NAME " " A) + + +/* Defines for ToUCam cameras */ +#define TOUCAM_HEADER_SIZE 8 +#define TOUCAM_TRAILER_SIZE 4 + +#define FEATURE_MOTOR_PANTILT 0x0001 + +/* Version block */ +#define PWC_MAJOR 9 +#define PWC_MINOR 0 +#define PWC_VERSION "9.0.2-unofficial" +#define PWC_NAME "pwc" + +/* Turn certain features on/off */ +#define PWC_INT_PIPE 0 + +/* Ignore errors in the first N frames, to allow for startup delays */ +#define FRAME_LOWMARK 5 + +/* Size and number of buffers for the ISO pipe. */ +#define MAX_ISO_BUFS 2 +#define ISO_FRAMES_PER_DESC 10 +#define ISO_MAX_FRAME_SIZE 960 +#define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE) + +/* Frame buffers: contains compressed or uncompressed video data. */ +#define MAX_FRAMES 5 +/* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */ +#define PWC_FRAME_SIZE (460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE) + +/* Absolute maximum number of buffers available for mmap() */ +#define MAX_IMAGES 10 + +/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */ +struct pwc_iso_buf +{ + void *data; + int length; + int read; + struct urb *urb; +}; + +/* intermediate buffers with raw data from the USB cam */ +struct pwc_frame_buf +{ + void *data; + volatile int filled; /* number of bytes filled */ + struct pwc_frame_buf *next; /* list */ +#if PWC_DEBUG + int sequence; /* Sequence number */ +#endif +}; + +struct pwc_device +{ + struct video_device *vdev; +#ifdef PWC_MAGIC + int magic; +#endif + /* Pointer to our usb_device */ + struct usb_device *udev; + + int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */ + int release; /* release number */ + int features; /* feature bits */ + char serial[30]; /* serial number (string) */ + int error_status; /* set when something goes wrong with the cam (unplugged, USB errors) */ + int usb_init; /* set when the cam has been initialized over USB */ + + /*** Video data ***/ + int vopen; /* flag */ + int vendpoint; /* video isoc endpoint */ + int vcinterface; /* video control interface */ + int valternate; /* alternate interface needed */ + int vframes, vsize; /* frames-per-second & size (see PSZ_*) */ + int vpalette; /* palette: 420P, RAW or RGBBAYER */ + int vframe_count; /* received frames */ + int vframes_dumped; /* counter for dumped frames */ + int vframes_error; /* frames received in error */ + int vmax_packet_size; /* USB maxpacket size */ + int vlast_packet_size; /* for frame synchronisation */ + int visoc_errors; /* number of contiguous ISOC errors */ + int vcompression; /* desired compression factor */ + int vbandlength; /* compressed band length; 0 is uncompressed */ + char vsnapshot; /* snapshot mode */ + char vsync; /* used by isoc handler */ + char vmirror; /* for ToUCaM series */ + + int cmd_len; + unsigned char cmd_buf[13]; + + /* The image acquisition requires 3 to 4 steps: + 1. data is gathered in short packets from the USB controller + 2. data is synchronized and packed into a frame buffer + 3a. in case data is compressed, decompress it directly into image buffer + 3b. in case data is uncompressed, copy into image buffer with viewport + 4. data is transferred to the user process + + Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES.... + We have in effect a back-to-back-double-buffer system. + */ + /* 1: isoc */ + struct pwc_iso_buf sbuf[MAX_ISO_BUFS]; + char iso_init; + + /* 2: frame */ + struct pwc_frame_buf *fbuf; /* all frames */ + struct pwc_frame_buf *empty_frames, *empty_frames_tail; /* all empty frames */ + struct pwc_frame_buf *full_frames, *full_frames_tail; /* all filled frames */ + struct pwc_frame_buf *fill_frame; /* frame currently being filled */ + struct pwc_frame_buf *read_frame; /* frame currently read by user process */ + int frame_header_size, frame_trailer_size; + int frame_size; + int frame_total_size; /* including header & trailer */ + int drop_frames; +#if PWC_DEBUG + int sequence; /* Debugging aid */ +#endif + + /* 3: decompression */ + struct pwc_decompressor *decompressor; /* function block with decompression routines */ + void *decompress_data; /* private data for decompression engine */ + + /* 4: image */ + /* We have an 'image' and a 'view', where 'image' is the fixed-size image + as delivered by the camera, and 'view' is the size requested by the + program. The camera image is centered in this viewport, laced with + a gray or black border. view_min <= image <= view <= view_max; + */ + int image_mask; /* bitmask of supported sizes */ + struct pwc_coord view_min, view_max; /* minimum and maximum viewable sizes */ + struct pwc_coord abs_max; /* maximum supported size with compression */ + struct pwc_coord image, view; /* image and viewport size */ + struct pwc_coord offset; /* offset within the viewport */ + + void *image_data; /* total buffer, which is subdivided into ... */ + void *image_ptr[MAX_IMAGES]; /* ...several images... */ + int fill_image; /* ...which are rotated. */ + int len_per_image; /* length per image */ + int image_read_pos; /* In case we read data in pieces, keep track of were we are in the imagebuffer */ + int image_used[MAX_IMAGES]; /* For MCAPTURE and SYNC */ + + struct semaphore modlock; /* to prevent races in video_open(), etc */ + spinlock_t ptrlock; /* for manipulating the buffer pointers */ + + /*** motorized pan/tilt feature */ + struct pwc_mpt_range angle_range; + int pan_angle; /* in degrees * 100 */ + int tilt_angle; /* absolute angle; 0,0 is home position */ + + /*** Misc. data ***/ + wait_queue_head_t frameq; /* When waiting for a frame to finish... */ +#if PWC_INT_PIPE + void *usb_int_handler; /* for the interrupt endpoint */ +#endif +}; + + +#ifdef __cplusplus +extern "C" { +#endif + +/* Global variable */ +extern int pwc_trace; + +/** functions in pwc-if.c */ +int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot); + +/** Functions in pwc-misc.c */ +/* sizes in pixels */ +extern struct pwc_coord pwc_image_sizes[PSZ_MAX]; + +int pwc_decode_size(struct pwc_device *pdev, int width, int height); +void pwc_construct(struct pwc_device *pdev); + +/** Functions in pwc-ctrl.c */ +/* Request a certain video mode. Returns < 0 if not possible */ +extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot); + +/* Various controls; should be obvious. Value 0..65535, or < 0 on error */ +extern int pwc_get_brightness(struct pwc_device *pdev); +extern int pwc_set_brightness(struct pwc_device *pdev, int value); +extern int pwc_get_contrast(struct pwc_device *pdev); +extern int pwc_set_contrast(struct pwc_device *pdev, int value); +extern int pwc_get_gamma(struct pwc_device *pdev); +extern int pwc_set_gamma(struct pwc_device *pdev, int value); +extern int pwc_get_saturation(struct pwc_device *pdev); +extern int pwc_set_saturation(struct pwc_device *pdev, int value); +extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value); +extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor); + +/* Power down or up the camera; not supported by all models */ +extern int pwc_camera_power(struct pwc_device *pdev, int power); + +/* Private ioctl()s; see pwc-ioctl.h */ +extern int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg); + + +/** pwc-uncompress.c */ +/* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */ +extern int pwc_decompress(struct pwc_device *pdev); + +#ifdef __cplusplus +} +#endif + + +#endif diff --git a/drivers/media/video/rds.h b/drivers/media/video/rds.h deleted file mode 100644 index 0d30eb744e61..000000000000 --- a/drivers/media/video/rds.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - - Types and defines needed for RDS. This is included by - saa6588.c and every driver (e.g. bttv-driver.c) that wants - to use the saa6588 module. - - Instead of having a seperate rds.h, I'd prefer to include - this stuff in one of the already existing files like tuner.h - - (c) 2005 by Hans J. Koch - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -#ifndef _RDS_H -#define _RDS_H - -struct rds_command { - unsigned int block_count; - int result; - unsigned char __user *buffer; - struct file *instance; - poll_table *event_list; -}; - -#define RDS_CMD_OPEN _IOW('R',1,int) -#define RDS_CMD_CLOSE _IOW('R',2,int) -#define RDS_CMD_READ _IOR('R',3,int) -#define RDS_CMD_POLL _IOR('R',4,int) - -#endif - - - - diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index 2ce010201308..dd830e0e5e96 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -46,6 +46,8 @@ #include <linux/i2c.h> #include <linux/videotext.h> #include <linux/videodev.h> +#include <linux/mutex.h> + #include "saa5246a.h" MODULE_AUTHOR("Michael Geng <linux@MichaelGeng.de>"); @@ -57,7 +59,7 @@ struct saa5246a_device u8 pgbuf[NUM_DAUS][VTX_VIRTUALSIZE]; int is_searching[NUM_DAUS]; struct i2c_client *client; - struct semaphore lock; + struct mutex lock; }; static struct video_device saa_template; /* Declared near bottom */ @@ -90,7 +92,7 @@ static int saa5246a_attach(struct i2c_adapter *adap, int addr, int kind) return -ENOMEM; } strlcpy(client->name, IF_NAME, I2C_NAME_SIZE); - init_MUTEX(&t->lock); + mutex_init(&t->lock); /* * Now create a video4linux device @@ -719,9 +721,9 @@ static int saa5246a_ioctl(struct inode *inode, struct file *file, int err; cmd = vtx_fix_command(cmd); - down(&t->lock); + mutex_lock(&t->lock); err = video_usercopy(inode, file, cmd, arg, do_saa5246a_ioctl); - up(&t->lock); + mutex_unlock(&t->lock); return err; } diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 5694eb58c3a1..531e9461cb66 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -56,6 +56,8 @@ #include <linux/i2c.h> #include <linux/videotext.h> #include <linux/videodev.h> +#include <linux/mutex.h> + #include <asm/io.h> #include <asm/uaccess.h> @@ -69,7 +71,7 @@ #define NUM_BUFS 8 #define IF_NAME "SAA5249" -static const int disp_modes[8][3] = +static const int disp_modes[8][3] = { { 0x46, 0x03, 0x03 }, /* DISPOFF */ { 0x46, 0xcc, 0xcc }, /* DISPNORM */ @@ -105,7 +107,7 @@ struct saa5249_device int disp_mode; int virtual_mode; struct i2c_client *client; - struct semaphore lock; + struct mutex lock; }; @@ -148,8 +150,8 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) client=kmalloc(sizeof(*client), GFP_KERNEL); if(client==NULL) return -ENOMEM; - client_template.adapter = adap; - client_template.addr = addr; + client_template.adapter = adap; + client_template.addr = addr; memcpy(client, &client_template, sizeof(*client)); t = kzalloc(sizeof(*t), GFP_KERNEL); if(t==NULL) @@ -158,12 +160,12 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) return -ENOMEM; } strlcpy(client->name, IF_NAME, I2C_NAME_SIZE); - init_MUTEX(&t->lock); - + mutex_init(&t->lock); + /* * Now create a video4linux device */ - + vd = kmalloc(sizeof(struct video_device), GFP_KERNEL); if(vd==NULL) { @@ -173,8 +175,8 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) } i2c_set_clientdata(client, vd); memcpy(vd, &saa_template, sizeof(*vd)); - - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) + + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); @@ -184,9 +186,9 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) t->vdau[pgbuf].stopped = TRUE; t->is_searching[pgbuf] = FALSE; } - vd->priv=t; - - + vd->priv=t; + + /* * Register it */ @@ -206,7 +208,7 @@ static int saa5249_attach(struct i2c_adapter *adap, int addr, int kind) /* * We do most of the hard work when we become a device on the i2c. */ - + static int saa5249_probe(struct i2c_adapter *adap) { if (adap->class & I2C_CLASS_TV_ANALOG) @@ -227,7 +229,7 @@ static int saa5249_detach(struct i2c_client *client) /* new I2C driver support */ -static struct i2c_driver i2c_driver_videotext = +static struct i2c_driver i2c_driver_videotext = { .driver = { .name = IF_NAME, /* name */ @@ -247,7 +249,7 @@ static struct i2c_client client_template = { * delay may be longer. */ -static void jdelay(unsigned long delay) +static void jdelay(unsigned long delay) { sigset_t oldblocked = current->blocked; @@ -267,14 +269,14 @@ static void jdelay(unsigned long delay) /* * I2C interfaces */ - -static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data) + +static int i2c_sendbuf(struct saa5249_device *t, int reg, int count, u8 *data) { char buf[64]; - + buf[0] = reg; memcpy(buf+1, data, count); - + if(i2c_master_send(t->client, buf, count+1)==count+1) return 0; return -1; @@ -287,7 +289,7 @@ static int i2c_senddata(struct saa5249_device *t, ...) int ct=0; va_list argp; va_start(argp,t); - + while((v=va_arg(argp,int))!=-1) buf[ct++]=v; return i2c_sendbuf(t, buf[0], ct-1, buf+1); @@ -299,7 +301,7 @@ static int i2c_senddata(struct saa5249_device *t, ...) * Returns -1 if I²C-device didn't send acknowledge, 0 otherwise */ -static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf) +static int i2c_getdata(struct saa5249_device *t, int count, u8 *buf) { if(i2c_master_recv(t->client, buf, count)!=count) return -1; @@ -318,9 +320,9 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, struct video_device *vd = video_devdata(file); struct saa5249_device *t=vd->priv; - switch(cmd) + switch(cmd) { - case VTXIOCGETINFO: + case VTXIOCGETINFO: { vtx_info_t *info = arg; info->version_major = VTX_VER_MAJ; @@ -330,10 +332,10 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return 0; } - case VTXIOCCLRPAGE: + case VTXIOCCLRPAGE: { vtx_pagereq_t *req = arg; - + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) return -EINVAL; memset(t->vdau[req->pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); @@ -341,17 +343,17 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return 0; } - case VTXIOCCLRFOUND: + case VTXIOCCLRFOUND: { vtx_pagereq_t *req = arg; - + if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) return -EINVAL; t->vdau[req->pgbuf].clrfound = TRUE; return 0; } - case VTXIOCPAGEREQ: + case VTXIOCPAGEREQ: { vtx_pagereq_t *req = arg; if (!(req->pagemask & PGMASK_PAGE)) @@ -379,7 +381,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return 0; } - case VTXIOCGETSTAT: + case VTXIOCGETSTAT: { vtx_pagereq_t *req = arg; u8 infobits[10]; @@ -388,7 +390,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, if (req->pgbuf < 0 || req->pgbuf >= NUM_DAUS) return -EINVAL; - if (!t->vdau[req->pgbuf].stopped) + if (!t->vdau[req->pgbuf].stopped) { if (i2c_senddata(t, 2, 0, -1) || i2c_sendbuf(t, 3, sizeof(t->vdau[0].sregs), t->vdau[req->pgbuf].sregs) || @@ -401,7 +403,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return -EIO; if (!(infobits[8] & 0x10) && !(infobits[7] & 0xf0) && /* check FOUND-bit */ - (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) || + (memcmp(infobits, t->vdau[req->pgbuf].laststat, sizeof(infobits)) || time_after_eq(jiffies, t->vdau[req->pgbuf].expire))) { /* check if new page arrived */ if (i2c_senddata(t, 8, 0, 0, 0, -1) || @@ -409,7 +411,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return -EIO; t->vdau[req->pgbuf].expire = jiffies + PGBUF_EXPIRE; memset(t->vdau[req->pgbuf].pgbuf + VTX_PAGESIZE, ' ', VTX_VIRTUALSIZE - VTX_PAGESIZE); - if (t->virtual_mode) + if (t->virtual_mode) { /* Packet X/24 */ if (i2c_senddata(t, 8, 0, 0x20, 0, -1) || @@ -457,9 +459,9 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, info.notfound = !!(infobits[8] & 0x10); info.pblf = !!(infobits[9] & 0x20); info.hamming = 0; - for (a = 0; a <= 7; a++) + for (a = 0; a <= 7; a++) { - if (infobits[a] & 0xf0) + if (infobits[a] & 0xf0) { info.hamming = 1; break; @@ -469,14 +471,14 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, info.notfound = 1; if(copy_to_user(req->buffer, &info, sizeof(vtx_pageinfo_t))) return -EFAULT; - if (!info.hamming && !info.notfound) + if (!info.hamming && !info.notfound) { t->is_searching[req->pgbuf] = FALSE; } return 0; } - case VTXIOCGETPAGE: + case VTXIOCGETPAGE: { vtx_pagereq_t *req = arg; int start, end; @@ -486,15 +488,15 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return -EINVAL; if(copy_to_user(req->buffer, &t->vdau[req->pgbuf].pgbuf[req->start], req->end - req->start + 1)) return -EFAULT; - - /* + + /* * Always read the time directly from SAA5249 */ - - if (req->start <= 39 && req->end >= 32) + + if (req->start <= 39 && req->end >= 32) { int len; - char buf[16]; + char buf[16]; start = max(req->start, 32); end = min(req->end, 39); len=end-start+1; @@ -505,7 +507,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return -EFAULT; } /* Insert the current header if DAU is still searching for a page */ - if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) + if (req->start <= 31 && req->end >= 7 && t->is_searching[req->pgbuf]) { char buf[32]; int len; @@ -521,7 +523,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return 0; } - case VTXIOCSTOPDAU: + case VTXIOCSTOPDAU: { vtx_pagereq_t *req = arg; @@ -532,12 +534,12 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return 0; } - case VTXIOCPUTPAGE: - case VTXIOCSETDISP: - case VTXIOCPUTSTAT: + case VTXIOCPUTPAGE: + case VTXIOCSETDISP: + case VTXIOCPUTSTAT: return 0; - - case VTXIOCCLRCACHE: + + case VTXIOCCLRCACHE: { if (i2c_senddata(t, 0, NUM_DAUS, 0, 8, -1) || i2c_senddata(t, 11, ' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ',' ', @@ -549,7 +551,7 @@ static int do_saa5249_ioctl(struct inode *inode, struct file *file, return 0; } - case VTXIOCSETVIRT: + case VTXIOCSETVIRT: { /* The SAA5249 has virtual-row reception turned on always */ t->virtual_mode = (int)(long)arg; @@ -610,22 +612,22 @@ static inline unsigned int vtx_fix_command(unsigned int cmd) /* * Handle the locking */ - + static int saa5249_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) + unsigned int cmd, unsigned long arg) { struct video_device *vd = video_devdata(file); struct saa5249_device *t=vd->priv; int err; - + cmd = vtx_fix_command(cmd); - down(&t->lock); + mutex_lock(&t->lock); err = video_usercopy(inode,file,cmd,arg,do_saa5249_ioctl); - up(&t->lock); + mutex_unlock(&t->lock); return err; } -static int saa5249_open(struct inode *inode, struct file *file) +static int saa5249_open(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); struct saa5249_device *t=vd->priv; @@ -634,7 +636,7 @@ static int saa5249_open(struct inode *inode, struct file *file) err = video_exclusive_open(inode,file); if (err < 0) return err; - + if (t->client==NULL) { err = -ENODEV; goto fail; @@ -645,13 +647,13 @@ static int saa5249_open(struct inode *inode, struct file *file) i2c_senddata(t, 1, disp_modes[t->disp_mode][0], 0, -1) || /* Display TV-picture, no virtual rows */ i2c_senddata(t, 4, NUM_DAUS, disp_modes[t->disp_mode][1], disp_modes[t->disp_mode][2], 7, -1)) /* Set display to page 4 */ - + { err = -EIO; goto fail; } - for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) + for (pgbuf = 0; pgbuf < NUM_DAUS; pgbuf++) { memset(t->vdau[pgbuf].pgbuf, ' ', sizeof(t->vdau[0].pgbuf)); memset(t->vdau[pgbuf].sregs, 0, sizeof(t->vdau[0].sregs)); @@ -671,7 +673,7 @@ static int saa5249_open(struct inode *inode, struct file *file) -static int saa5249_release(struct inode *inode, struct file *file) +static int saa5249_release(struct inode *inode, struct file *file) { struct video_device *vd = video_devdata(file); struct saa5249_device *t=vd->priv; @@ -688,7 +690,7 @@ static int __init init_saa_5249 (void) return i2c_add_driver(&i2c_driver_videotext); } -static void __exit cleanup_saa_5249 (void) +static void __exit cleanup_saa_5249 (void) { i2c_del_driver(&i2c_driver_videotext); } diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index d17395c4f55c..a81285ca7d5b 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -32,7 +32,7 @@ #include <asm/uaccess.h> -#include "rds.h" +#include <media/rds.h> /* Addresses to scan */ static unsigned short normal_i2c[] = { diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 7bb85a7b326e..41d951db6ec0 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -39,7 +39,6 @@ MODULE_AUTHOR("Pauline Middelink"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(s) (s)->name @@ -108,13 +107,8 @@ saa7110_write_block (struct i2c_client *client, * the adapter understands raw I2C */ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { struct saa7110 *decoder = i2c_get_clientdata(client); - struct i2c_msg msg; - msg.len = len; - msg.buf = (char *) data; - msg.addr = client->addr; - msg.flags = 0; - ret = i2c_transfer(client->adapter, &msg, 1); + ret = i2c_master_send(client, data, len); /* Cache the written data */ memcpy(decoder->reg + reg, data + 1, len - 1); @@ -145,7 +139,7 @@ saa7110_read (struct i2c_client *client) static int saa7110_selmux (struct i2c_client *client, - int chan) + int chan) { static const unsigned char modes[9][8] = { /* mode 0 */ @@ -432,15 +426,13 @@ saa7110_command (struct i2c_client *client, break; case DECODER_DUMP: - for (v = 0; v < 0x34; v += 16) { + for (v = 0; v < SAA7110_NR_REG; v += 16) { int j; - dprintk(1, KERN_INFO "%s: %03x\n", I2C_NAME(client), + dprintk(1, KERN_DEBUG "%s: %02x:", I2C_NAME(client), v); - for (j = 0; j < 16; j++) { - dprintk(1, KERN_INFO " %02x", - decoder->reg[v + j]); - } - dprintk(1, KERN_INFO "\n"); + for (j = 0; j < 16 && v + j < SAA7110_NR_REG; j++) + dprintk(1, " %02x", decoder->reg[v + j]); + dprintk(1, "\n"); } break; @@ -465,7 +457,7 @@ static unsigned short normal_i2c[] = { }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c index 8c06592b37ff..686fd4746205 100644 --- a/drivers/media/video/saa7111.c +++ b/drivers/media/video/saa7111.c @@ -1,4 +1,4 @@ -/* +/* * saa7111 - Philips SAA7111A video decoder driver version 0.0.3 * * Copyright (C) 1998 Dave Perks <dperks@ibm.net> @@ -52,7 +52,6 @@ MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(s) (s)->name @@ -70,8 +69,10 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* ----------------------------------------------------------------------- */ +#define SAA7111_NR_REG 0x18 + struct saa7111 { - unsigned char reg[32]; + unsigned char reg[SAA7111_NR_REG]; int norm; int input; @@ -110,24 +111,21 @@ saa7111_write_block (struct i2c_client *client, if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { /* do raw I2C, not smbus compatible */ struct saa7111 *decoder = i2c_get_clientdata(client); - struct i2c_msg msg; u8 block_data[32]; + int block_len; - msg.addr = client->addr; - msg.flags = 0; while (len >= 2) { - msg.buf = (char *) block_data; - msg.len = 0; - block_data[msg.len++] = reg = data[0]; + block_len = 0; + block_data[block_len++] = reg = data[0]; do { - block_data[msg.len++] = + block_data[block_len++] = decoder->reg[reg++] = data[1]; len -= 2; data += 2; } while (len >= 2 && data[0] == reg && - msg.len < 32); - if ((ret = i2c_transfer(client->adapter, - &msg, 1)) < 0) + block_len < 32); + if ((ret = i2c_master_send(client, block_data, + block_len)) < 0) break; } } else { @@ -210,6 +208,7 @@ saa7111_command (struct i2c_client *client, switch (cmd) { case 0: + break; case DECODER_INIT: { struct video_decoder_init *init = arg; @@ -227,11 +226,11 @@ saa7111_command (struct i2c_client *client, { int i; - for (i = 0; i < 32; i += 16) { + for (i = 0; i < SAA7111_NR_REG; i += 16) { int j; printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i); - for (j = 0; j < 16; ++j) { + for (j = 0; j < 16 && i + j < SAA7111_NR_REG; ++j) { printk(" %02x", saa7111_read(client, i + j)); } @@ -483,7 +482,7 @@ saa7111_command (struct i2c_client *client, static unsigned short normal_i2c[] = { I2C_SAA7111 >> 1, I2C_CLIENT_END }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c index fd0a4b4ef014..90398ab8252e 100644 --- a/drivers/media/video/saa7114.c +++ b/drivers/media/video/saa7114.c @@ -1,4 +1,4 @@ -/* +/* * saa7114 - Philips SAA7114H video decoder driver version 0.0.1 * * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> @@ -55,7 +55,6 @@ MODULE_AUTHOR("Maxim Yevtyushkin"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(x) (x)->name @@ -139,9 +138,6 @@ saa7114_write (struct i2c_client *client, u8 reg, u8 value) { - /*struct saa7114 *decoder = i2c_get_clientdata(client);*/ - - /*decoder->reg[reg] = value;*/ return i2c_smbus_write_byte_data(client, reg, value); } @@ -157,25 +153,21 @@ saa7114_write_block (struct i2c_client *client, * the adapter understands raw I2C */ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { /* do raw I2C, not smbus compatible */ - /*struct saa7114 *decoder = i2c_get_clientdata(client);*/ - struct i2c_msg msg; u8 block_data[32]; + int block_len; - msg.addr = client->addr; - msg.flags = 0; while (len >= 2) { - msg.buf = (char *) block_data; - msg.len = 0; - block_data[msg.len++] = reg = data[0]; + block_len = 0; + block_data[block_len++] = reg = data[0]; do { - block_data[msg.len++] = - /*decoder->reg[reg++] =*/ data[1]; + block_data[block_len++] = data[1]; + reg++; len -= 2; data += 2; } while (len >= 2 && data[0] == reg && - msg.len < 32); - if ((ret = i2c_transfer(client->adapter, - &msg, 1)) < 0) + block_len < 32); + if ((ret = i2c_master_send(client, block_data, + block_len)) < 0) break; } } else { @@ -308,7 +300,7 @@ static const unsigned char init[] = { 0x55, 0xff, 0x56, 0xff, 0x57, 0xff, - 0x58, 0x40, // framing code + 0x58, 0x40, // framing code 0x59, 0x47, // horizontal offset 0x5a, 0x06, // vertical offset 0x5b, 0x83, // field offset @@ -353,7 +345,7 @@ static const unsigned char init[] = { 0x82, 0x00, 0x83, 0x00, 0x84, 0xc5, - 0x85, 0x0d, // hsync and vsync ? + 0x85, 0x0d, // hsync and vsync ? 0x86, 0x40, 0x87, 0x01, 0x88, 0x00, @@ -442,7 +434,7 @@ static const unsigned char init[] = { 0xd9, 0x04, 0xda, 0x00, // horizontal luminance phase offset 0xdb, 0x00, - 0xdc, 0x00, // horizontal chrominance scaling increment + 0xdc, 0x00, // horizontal chrominance scaling increment 0xdd, 0x02, 0xde, 0x00, // horizontal chrominance phase offset 0xdf, 0x00, @@ -762,7 +754,7 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x87, decoder->reg[REG_ADDR(0x87)]); saa7114_write(client, 0x88, 0xd8); // sw reset scaler - saa7114_write(client, 0x88, 0xf8); // sw reset scaler release + saa7114_write(client, 0x88, 0xf8); // sw reset scaler release saa7114_write(client, 0x80, 0x36); } @@ -821,7 +813,7 @@ static unsigned short normal_i2c[] = { I2C_SAA7114 >> 1, I2C_SAA7114A >> 1, I2C_CLIENT_END }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index ffd87ce55556..b05015282601 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1,4 +1,4 @@ -/* saa7115 - Philips SAA7114/SAA7115 video decoder driver +/* saa7115 - Philips SAA7113/SAA7114/SAA7115 video decoder driver * * Based on saa7114 driver by Maxim Yevtyushkin, which is based on * the saa7111 driver by Dave Perks. @@ -16,6 +16,7 @@ * (2/17/2003) * * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl> + * SAA7113 support by Mauro Carvalho Chehab <mchehab@infradead.org> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -39,11 +40,11 @@ #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> -#include <media/audiochip.h> #include <asm/div64.h> -MODULE_DESCRIPTION("Philips SAA7114/SAA7115 video decoder driver"); -MODULE_AUTHOR("Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, Hans Verkuil"); +MODULE_DESCRIPTION("Philips SAA7113/SAA7114/SAA7115 video decoder driver"); +MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " + "Hans Verkuil, Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); static int debug = 0; @@ -51,7 +52,10 @@ module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { + 0x4a >>1, 0x48 >>1, /* SAA7113 */ + 0x42 >> 1, 0x40 >> 1, /* SAA7114 and SAA7115 */ + I2C_CLIENT_END }; I2C_CLIENT_INSMOD; @@ -101,10 +105,12 @@ static inline int saa7115_read(struct i2c_client *client, u8 reg) Hauppauge driver sets. */ static const unsigned char saa7115_init_auto_input[] = { + /* Front-End Part */ 0x01, 0x48, /* white peak control disabled */ 0x03, 0x20, /* was 0x30. 0x20: long vertical blanking */ 0x04, 0x90, /* analog gain set to 0 */ 0x05, 0x90, /* analog gain set to 0 */ + /* Decoder Part */ 0x06, 0xeb, /* horiz sync begin = -21 */ 0x07, 0xe0, /* horiz sync stop = -17 */ 0x0a, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ @@ -123,6 +129,8 @@ static const unsigned char saa7115_init_auto_input[] = { 0x1b, 0x42, /* misc chroma control 0x42 = recommended */ 0x1c, 0xa9, /* combfilter control 0xA9 = recommended */ 0x1d, 0x01, /* combfilter control 0x01 = recommended */ + + /* Power Device Control */ 0x88, 0xd0, /* reset device */ 0x88, 0xf0, /* set device programmed, all in operational mode */ 0x00, 0x00 @@ -338,6 +346,33 @@ static const unsigned char saa7115_cfg_vbi_off[] = { 0x00, 0x00 }; +static const unsigned char saa7113_init_auto_input[] = { + 0x01, 0x08, /* PH7113_INCREMENT_DELAY - (1) (1) (1) (1) IDEL3 IDEL2 IDELL1 IDEL0 */ + 0x02, 0xc2, /* PH7113_ANALOG_INPUT_CONTR_1 - FUSE1 FUSE0 GUDL1 GUDL0 MODE3 MODE2 MODE1 MODE0 */ + 0x03, 0x30, /* PH7113_ANALOG_INPUT_CONTR_2 - (1) HLNRS VBSL WPOFF HOLDG GAFIX GAI28 GAI18 */ + 0x04, 0x00, /* PH7113_ANALOG_INPUT_CONTR_3 - GAI17 GAI16 GAI15 GAI14 GAI13 GAI12 GAI11 GAI10 */ + 0x05, 0x00, /* PH7113_ANALOG_INPUT_CONTR_4 - GAI27 GAI26 GAI25 GAI24 GAI23 GAI22 GAI21 GAI20 */ + 0x06, 0x89, /* PH7113_HORIZONTAL_SYNC_START - HSB7 HSB6 HSB5 HSB4 HSB3 HSB2 HSB1 HSB0 */ + 0x07, 0x0d, /* PH7113_HORIZONTAL_SYNC_STOP - HSS7 HSS6 HSS5 HSS4 HSS3 HSS2 HSS1 HSS0 */ + 0x08, 0x88, /* PH7113_SYNC_CONTROL - AUFD FSEL FOET HTC1 HTC0 HPLL VNOI1 VNOI0 */ + 0x09, 0x01, /* PH7113_LUMINANCE_CONTROL - BYPS PREF BPSS1 BPSS0 VBLB UPTCV APER1 APER0 */ + 0x0a, 0x80, /* PH7113_LUMINANCE_BRIGHTNESS - BRIG7 BRIG6 BRIG5 BRIG4 BRIG3 BRIG2 BRIG1 BRIG0 */ + 0x0b, 0x47, /* PH7113_LUMINANCE_CONTRAST - CONT7 CONT6 CONT5 CONT4 CONT3 CONT2 CONT1 CONT0 */ + 0x0c, 0x40, /* PH7113_CHROMA_SATURATION - SATN7 SATN6 SATN5 SATN4 SATN3 SATN2 SATN1 SATN0 */ + 0x0d, 0x00, /* PH7113_CHROMA_HUE_CONTROL - HUEC7 HUEC6 HUEC5 HUEC4 HUEC3 HUEC2 HUEC1 HUEC0 */ + 0x0e, 0x01, /* PH7113_CHROMA_CONTROL - CDTO CSTD2 CSTD1 CSTD0 DCCF FCTC CHBW1 CHBW0 */ + 0x0f, 0x2a, /* PH7113_CHROMA_GAIN_CONTROL - ACGC CGAIN6 CGAIN5 CGAIN4 CGAIN3 CGAIN2 CGAIN1 CGAIN0 */ + 0x10, 0x08, /* PH7113_FORMAT_DELAY_CONTROL - OFTS1 OFTS0 HDEL1 HDEL0 VRLN YDEL2 YDEL1 YDEL0 */ + 0x11, 0x0c, /* PH7113_OUTPUT_CONTROL_1 - GPSW1 CM99 GPSW0 HLSEL OEYC OERT VIPB COLO */ + 0x12, 0x07, /* PH7113_OUTPUT_CONTROL_2 - RTSE13 RTSE12 RTSE11 RTSE10 RTSE03 RTSE02 RTSE01 RTSE00 */ + 0x13, 0x00, /* PH7113_OUTPUT_CONTROL_3 - ADLSB (1) (1) OLDSB FIDP (1) AOSL1 AOSL0 */ + 0x14, 0x00, /* RESERVED 14 - (1) (1) (1) (1) (1) (1) (1) (1) */ + 0x15, 0x00, /* PH7113_V_GATE1_START - VSTA7 VSTA6 VSTA5 VSTA4 VSTA3 VSTA2 VSTA1 VSTA0 */ + 0x16, 0x00, /* PH7113_V_GATE1_STOP - VSTO7 VSTO6 VSTO5 VSTO4 VSTO3 VSTO2 VSTO1 VSTO0 */ + 0x17, 0x00, /* PH7113_V_GATE1_MSB - (1) (1) (1) (1) (1) (1) VSTO8 VSTA8 */ + 0x00, 0x00 +}; + static const unsigned char saa7115_init_misc[] = { 0x38, 0x03, /* audio stuff */ 0x39, 0x10, @@ -677,10 +712,35 @@ static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std) saa7115_writeregs(client, saa7115_cfg_50hz_video); } + /* Register 0E - Bits D6-D4 on NO-AUTO mode + (SAA7113 doesn't have auto mode) + 50 Hz / 625 lines 60 Hz / 525 lines + 000 PAL BGDHI (4.43Mhz) NTSC M (3.58MHz) + 001 NTSC 4.43 (50 Hz) PAL 4.43 (60 Hz) + 010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz) + 011 NTSC N (3.58MHz) PAL M (3.58MHz) + 100 reserved NTSC-Japan (3.58MHz) + */ + if (state->ident == V4L2_IDENT_SAA7113) { + u8 reg = saa7115_read(client, 0x0e) & 0x8f; + + if (std == V4L2_STD_PAL_M) { + reg|=0x30; + } else if (std == V4L2_STD_PAL_N) { + reg|=0x20; + } else if (std == V4L2_STD_PAL_60) { + reg|=0x10; + } else if (std == V4L2_STD_NTSC_M_JP) { + reg|=0x40; + } + saa7115_write(client, 0x0e, reg); + } + + state->std = std; /* restart task B if needed */ - if (taskb && state->ident == V4L2_IDENT_SAA7114) { + if (taskb && state->ident != V4L2_IDENT_SAA7115) { saa7115_writeregs(client, saa7115_cfg_vbi_on); } @@ -703,7 +763,7 @@ static void saa7115_log_status(struct i2c_client *client) int vcr; v4l_info(client, "Audio frequency: %d Hz\n", state->audclk_freq); - if (client->name[6] == '4') { + if (state->ident != V4L2_IDENT_SAA7115) { /* status for the saa7114 */ reg1f = saa7115_read(client, 0x1f); signalOk = (reg1f & 0xc1) == 0x81; @@ -751,8 +811,8 @@ static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo u8 lcr[24]; int i, x; - /* saa7114 doesn't yet support VBI */ - if (state->ident == V4L2_IDENT_SAA7114) + /* saa7113/71144 doesn't yet support VBI */ + if (state->ident != V4L2_IDENT_SAA7115) return; for (i = 0; i <= 23; i++) @@ -791,7 +851,7 @@ static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo case 0: lcr[i] |= 0xf << (4 * x); break; - case V4L2_SLICED_TELETEXT_B: + case V4L2_SLICED_TELETEXT_PAL_B: lcr[i] |= 1 << (4 * x); break; case V4L2_SLICED_CAPTION_525: @@ -820,7 +880,7 @@ static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo static int saa7115_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt) { static u16 lcr2vbi[] = { - 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ + 0, V4L2_SLICED_TELETEXT_PAL_B, 0, /* 1 */ 0, V4L2_SLICED_CAPTION_525, /* 4 */ V4L2_SLICED_WSS_625, 0, /* 5 */ V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ @@ -985,7 +1045,7 @@ static void saa7115_decode_vbi_line(struct i2c_client *client, /* decode payloads */ switch (id2) { case 1: - vbi->type = V4L2_SLICED_TELETEXT_B; + vbi->type = V4L2_SLICED_TELETEXT_PAL_B; break; case 4: if (!saa7115_odd_parity(p[0]) || !saa7115_odd_parity(p[1])) @@ -1261,14 +1321,12 @@ static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind) saa7115_write(client, 0, 5); chip_id = saa7115_read(client, 0) & 0x0f; - if (chip_id != 4 && chip_id != 5) { + if (chip_id <3 && chip_id > 5) { v4l_dbg(1, debug, client, "saa7115 not found\n"); kfree(client); return 0; } - if (chip_id == 4) { - snprintf(client->name, sizeof(client->name) - 1, "saa7114"); - } + snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id); v4l_info(client, "saa711%d found @ 0x%x (%s)\n", chip_id, address << 1, adapter->name); state = kzalloc(sizeof(struct saa7115_state), GFP_KERNEL); @@ -1285,13 +1343,27 @@ static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind) state->contrast = 64; state->hue = 0; state->sat = 64; - state->ident = (chip_id == 4) ? V4L2_IDENT_SAA7114 : V4L2_IDENT_SAA7115; + switch (chip_id) { + case 3: + state->ident = V4L2_IDENT_SAA7113; + break; + case 4: + state->ident = V4L2_IDENT_SAA7114; + break; + default: + state->ident = V4L2_IDENT_SAA7115; + break; + } + state->audclk_freq = 48000; v4l_dbg(1, debug, client, "writing init values\n"); /* init to 60hz/48khz */ - saa7115_writeregs(client, saa7115_init_auto_input); + if (state->ident==V4L2_IDENT_SAA7113) + saa7115_writeregs(client, saa7113_init_auto_input); + else + saa7115_writeregs(client, saa7115_init_auto_input); saa7115_writeregs(client, saa7115_init_misc); saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x); saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y); diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c index 6c161f2f5e2c..708fae51e8ee 100644 --- a/drivers/media/video/saa711x.c +++ b/drivers/media/video/saa711x.c @@ -45,7 +45,6 @@ MODULE_AUTHOR("Dave Perks, Jose Ignacio Gijon, Joerg Heckenbach, Mark McClelland MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(s) (s)->name diff --git a/drivers/media/video/saa7121.h b/drivers/media/video/saa7121.h index 74e37d405208..66967ae37494 100644 --- a/drivers/media/video/saa7121.h +++ b/drivers/media/video/saa7121.h @@ -64,7 +64,7 @@ #define PAL_MSB_VERTICAL 0x40 /* 7c */ /* Initialization Sequence */ - + static __u8 init7121ntsc[] = { 0x26, 0x0, 0x27, 0x0, 0x28, NTSC_BURST_START, 0x29, NTSC_BURST_END, @@ -95,7 +95,7 @@ static __u8 init7121ntsc[] = { 0x78, 0x0, 0x79, 0x0, 0x7a, NTSC_FIRST_ACTIVE, 0x7b, NTSC_LAST_ACTIVE, 0x7c, NTSC_MSB_VERTICAL, 0x7d, 0x0, 0x7e, 0x0, 0x7f, 0x0 -}; +}; #define INIT7121LEN (sizeof(init7121ntsc)/2) static __u8 init7121pal[] = { @@ -128,5 +128,5 @@ static __u8 init7121pal[] = { 0x78, 0x0, 0x79, 0x0, 0x7a, PAL_FIRST_ACTIVE, 0x7b, PAL_LAST_ACTIVE, 0x7c, PAL_MSB_VERTICAL, 0x7d, 0x0, 0x7e, 0x0, 0x7f, 0x0 -}; +}; #endif diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index 7df5e0826e12..bb3e0ba946d3 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -71,7 +71,7 @@ MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s)."); */ typedef struct snd_card_saa7134 { - snd_card_t *card; + struct snd_card *card; spinlock_t mixer_lock; int mixer_volume[MIXER_ADDR_LAST+1][2]; int capture_source[MIXER_ADDR_LAST+1][2]; @@ -95,10 +95,10 @@ typedef struct snd_card_saa7134_pcm { spinlock_t lock; - snd_pcm_substream_t *substream; + struct snd_pcm_substream *substream; } snd_card_saa7134_pcm_t; -static snd_card_t *snd_saa7134_cards[SNDRV_CARDS]; +static struct snd_card *snd_saa7134_cards[SNDRV_CARDS]; /* @@ -251,10 +251,10 @@ out: * */ -static int snd_card_saa7134_capture_trigger(snd_pcm_substream_t * substream, +static int snd_card_saa7134_capture_trigger(struct snd_pcm_substream * substream, int cmd) { - snd_pcm_runtime_t *runtime = substream->runtime; + struct snd_pcm_runtime *runtime = substream->runtime; snd_card_saa7134_pcm_t *pcm = runtime->private_data; struct saa7134_dev *dev=pcm->dev; int err = 0; @@ -308,8 +308,7 @@ static int dsp_buffer_init(struct saa7134_dev *dev) static int dsp_buffer_free(struct saa7134_dev *dev) { - if (!dev->dmasound.blksize) - BUG(); + BUG_ON(!dev->dmasound.blksize); videobuf_dma_free(&dev->dmasound.dma); @@ -333,9 +332,9 @@ static int dsp_buffer_free(struct saa7134_dev *dev) * */ -static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) +static int snd_card_saa7134_capture_prepare(struct snd_pcm_substream * substream) { - snd_pcm_runtime_t *runtime = substream->runtime; + struct snd_pcm_runtime *runtime = substream->runtime; int bswap, sign; u32 fmt, control; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); @@ -422,9 +421,10 @@ static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) * */ -static snd_pcm_uframes_t snd_card_saa7134_capture_pointer(snd_pcm_substream_t * substream) +static snd_pcm_uframes_t +snd_card_saa7134_capture_pointer(struct snd_pcm_substream * substream) { - snd_pcm_runtime_t *runtime = substream->runtime; + struct snd_pcm_runtime *runtime = substream->runtime; snd_card_saa7134_pcm_t *pcm = runtime->private_data; struct saa7134_dev *dev=pcm->dev; @@ -442,7 +442,7 @@ static snd_pcm_uframes_t snd_card_saa7134_capture_pointer(snd_pcm_substream_t * * ALSA hardware capabilities definition */ -static snd_pcm_hardware_t snd_card_saa7134_capture = +static struct snd_pcm_hardware snd_card_saa7134_capture = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | @@ -465,7 +465,7 @@ static snd_pcm_hardware_t snd_card_saa7134_capture = .periods_max = 1024, }; -static void snd_card_saa7134_runtime_free(snd_pcm_runtime_t *runtime) +static void snd_card_saa7134_runtime_free(struct snd_pcm_runtime *runtime) { snd_card_saa7134_pcm_t *pcm = runtime->private_data; @@ -482,8 +482,8 @@ static void snd_card_saa7134_runtime_free(snd_pcm_runtime_t *runtime) * */ -static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, - snd_pcm_hw_params_t * hw_params) +static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, + struct snd_pcm_hw_params * hw_params) { snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); struct saa7134_dev *dev; @@ -507,7 +507,7 @@ static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, /* release the old buffer */ if (substream->runtime->dma_area) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); dsp_buffer_free(dev); substream->runtime->dma_area = NULL; } @@ -523,12 +523,12 @@ static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, return err; } - if (0 != (err = videobuf_dma_pci_map(dev->pci, &dev->dmasound.dma))) { + if (0 != (err = videobuf_pci_dma_map(dev->pci, &dev->dmasound.dma))) { dsp_buffer_free(dev); return err; } if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) { - videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); dsp_buffer_free(dev); return err; } @@ -537,7 +537,7 @@ static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, dev->dmasound.dma.sglen, 0))) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); dsp_buffer_free(dev); return err; } @@ -562,7 +562,7 @@ static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, * */ -static int snd_card_saa7134_hw_free(snd_pcm_substream_t * substream) +static int snd_card_saa7134_hw_free(struct snd_pcm_substream * substream) { snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); struct saa7134_dev *dev; @@ -571,7 +571,7 @@ static int snd_card_saa7134_hw_free(snd_pcm_substream_t * substream) if (substream->runtime->dma_area) { saa7134_pgtable_free(dev->pci, &dev->dmasound.pt); - videobuf_dma_pci_unmap(dev->pci, &dev->dmasound.dma); + videobuf_pci_dma_unmap(dev->pci, &dev->dmasound.dma); dsp_buffer_free(dev); substream->runtime->dma_area = NULL; } @@ -588,7 +588,7 @@ static int snd_card_saa7134_hw_free(snd_pcm_substream_t * substream) * */ -static int snd_card_saa7134_capture_close(snd_pcm_substream_t * substream) +static int snd_card_saa7134_capture_close(struct snd_pcm_substream * substream) { return 0; } @@ -603,20 +603,20 @@ static int snd_card_saa7134_capture_close(snd_pcm_substream_t * substream) * */ -static int snd_card_saa7134_capture_open(snd_pcm_substream_t * substream) +static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) { - snd_pcm_runtime_t *runtime = substream->runtime; + struct snd_pcm_runtime *runtime = substream->runtime; snd_card_saa7134_pcm_t *pcm; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); struct saa7134_dev *dev = saa7134->dev; int err; - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); dev->dmasound.read_count = 0; dev->dmasound.read_offset = 0; - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); pcm = kzalloc(sizeof(*pcm), GFP_KERNEL); if (pcm == NULL) @@ -641,7 +641,7 @@ static int snd_card_saa7134_capture_open(snd_pcm_substream_t * substream) * ALSA capture callbacks definition */ -static snd_pcm_ops_t snd_card_saa7134_capture_ops = { +static struct snd_pcm_ops snd_card_saa7134_capture_ops = { .open = snd_card_saa7134_capture_open, .close = snd_card_saa7134_capture_close, .ioctl = snd_pcm_lib_ioctl, @@ -662,7 +662,7 @@ static snd_pcm_ops_t snd_card_saa7134_capture_ops = { static int snd_card_saa7134_pcm(snd_card_saa7134_t *saa7134, int device) { - snd_pcm_t *pcm; + struct snd_pcm *pcm; int err; if ((err = snd_pcm_new(saa7134->card, "SAA7134 PCM", device, 0, 1, &pcm)) < 0) @@ -680,7 +680,8 @@ static int snd_card_saa7134_pcm(snd_card_saa7134_t *saa7134, int device) .get = snd_saa7134_volume_get, .put = snd_saa7134_volume_put, \ .private_value = addr } -static int snd_saa7134_volume_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_t * uinfo) +static int snd_saa7134_volume_info(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_info * uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 2; @@ -689,7 +690,8 @@ static int snd_saa7134_volume_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_ return 0; } -static int snd_saa7134_volume_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +static int snd_saa7134_volume_get(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); int addr = kcontrol->private_value; @@ -699,7 +701,8 @@ static int snd_saa7134_volume_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ return 0; } -static int snd_saa7134_volume_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +static int snd_saa7134_volume_put(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); int change, addr = kcontrol->private_value; @@ -730,7 +733,8 @@ static int snd_saa7134_volume_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ .get = snd_saa7134_capsrc_get, .put = snd_saa7134_capsrc_put, \ .private_value = addr } -static int snd_saa7134_capsrc_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_t * uinfo) +static int snd_saa7134_capsrc_info(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_info * uinfo) { uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = 2; @@ -739,7 +743,8 @@ static int snd_saa7134_capsrc_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_ return 0; } -static int snd_saa7134_capsrc_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +static int snd_saa7134_capsrc_get(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); int addr = kcontrol->private_value; @@ -752,7 +757,8 @@ static int snd_saa7134_capsrc_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ return 0; } -static int snd_saa7134_capsrc_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +static int snd_saa7134_capsrc_put(struct snd_kcontrol * kcontrol, + struct snd_ctl_elem_value * ucontrol) { snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); int change, addr = kcontrol->private_value; @@ -829,7 +835,7 @@ static int snd_saa7134_capsrc_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_ return change; } -static snd_kcontrol_new_t snd_saa7134_controls[] = { +static struct snd_kcontrol_new snd_saa7134_controls[] = { SAA713x_VOLUME("Video Volume", 0, MIXER_ADDR_TVTUNER), SAA713x_CAPSRC("Video Capture Switch", 0, MIXER_ADDR_TVTUNER), SAA713x_VOLUME("Line Volume", 1, MIXER_ADDR_LINE1), @@ -848,7 +854,7 @@ SAA713x_CAPSRC("Line Capture Switch", 2, MIXER_ADDR_LINE2), static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip) { - snd_card_t *card = chip->card; + struct snd_card *card = chip->card; unsigned int idx; int err; @@ -862,7 +868,7 @@ static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip) return 0; } -static void snd_saa7134_free(snd_card_t * card) +static void snd_saa7134_free(struct snd_card * card) { snd_card_saa7134_t *chip = card->private_data; @@ -889,7 +895,7 @@ static void snd_saa7134_free(snd_card_t * card) static int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum) { - snd_card_t *card; + struct snd_card *card; snd_card_saa7134_t *chip; int err; @@ -934,7 +940,7 @@ static int alsa_card_saa7134_create(struct saa7134_dev *dev, int devnum) chip->irq = dev->pci->irq; - init_MUTEX(&dev->dmasound.lock); + mutex_init(&dev->dmasound.lock); if ((err = snd_card_saa7134_new_mixer(chip)) < 0) goto __nodev; diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 6bc63a4086c1..fdd7f48f3b76 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -536,7 +536,7 @@ struct saa7134_board saa7134_boards[] = { .radio = { .name = name_radio, .amux = LINE2, - }, + }, }, [SAA7134_BOARD_MD7134] = { .name = "Medion 7134", @@ -640,6 +640,32 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, }}, }, + [SAA7134_BOARD_ELSA_700TV] = { + .name = "ELSA EX-VISION 700TV", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_HITACHI_NTSC, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 6, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 7, + .amux = LINE1, + }}, + .mute = { + .name = name_mute, + .amux = TV, + }, + }, [SAA7134_BOARD_ASUSTeK_TVFM7134] = { .name = "ASUS TV-FM 7134", .audio_clock = 0x00187de7, @@ -2002,7 +2028,7 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_FLYTV_DIGIMATRIX] = { .name = "FlyTV mini Asus Digimatrix", .audio_clock = 0x00200000, - .tuner_type = TUNER_LG_NTSC_TALN_MINI, + .tuner_type = TUNER_LG_TALN, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -2598,6 +2624,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x00200000, + .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, /* Analog broadcast/cable TV */ .vmux = 1, @@ -2623,6 +2650,164 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x000000, /* GPIO21=Low for FM radio antenna */ }, }, + [SAA7134_BOARD_AVERMEDIA_777] = { + .name = "AverTV DVB-T 777", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_FLYDVBT_LR301] = { + /* LifeView FlyDVB-T */ + /* Giampiero Giancipoli <gianci@libero.it> */ + .name = "LifeView FlyDVB-T", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, /* Composite input */ + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, /* S-Video signal on S-Video input */ + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331] = { + .name = "ADS Instant TV Duo Cardbus PTV331", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .gpiomask = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */ + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00200000, + }}, + }, + [SAA7134_BOARD_TEVION_DVBT_220RF] = { + .name = "Tevion/KWorld DVB-T 220RF", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 0, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_KWORLD_ATSC110] = { + .name = "Kworld ATSC110", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_A169_B] = { + /* AVerMedia A169 */ + /* Rickard Osser <ricky@osser.se> */ + /* This card has two saa7134 chips on it, + but only one of them is currently working. */ + .name = "AVerMedia A169 B", + .audio_clock = 0x02187de7, + .tuner_type = TUNER_LG_TALN, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x0a60000, + }, + [SAA7134_BOARD_AVERMEDIA_A169_B1] = { + /* AVerMedia A169 */ + /* Rickard Osser <ricky@osser.se> */ + .name = "AVerMedia A169 B1", + .audio_clock = 0x02187de7, + .tuner_type = TUNER_LG_TALN, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0xca60000, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + .gpio = 0x04a61000, + },{ + .name = name_comp2, /* Composite SVIDEO (B/W if signal is carried with SVIDEO) */ + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 9, /* 9 is correct as S-VIDEO1 according to a169.inf! */ + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_MD7134_BRIDGE_2] = { + /* This card has two saa7134 chips on it, + but only one of them is currently working. + The programming for the primary decoder is + in SAA7134_BOARD_MD7134 */ + .name = "Medion 7134 Bridge #2", + .audio_clock = 0x00187de7, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -2753,6 +2938,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .driver_data = SAA7134_BOARD_ELSA_500TV, },{ .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1048, + .subdevice = 0x226c, + .driver_data = SAA7134_BOARD_ELSA_700TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, .subvendor = PCI_VENDOR_ID_ASUSTEK, .subdevice = 0x4842, @@ -3094,6 +3285,54 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x0319, .driver_data = SAA7134_BOARD_FLYDVB_TRIO, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, /* SAA 7131E */ + .subvendor = 0x1461, + .subdevice = 0x2c05, + .driver_data = SAA7134_BOARD_AVERMEDIA_777, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5168, + .subdevice = 0x0301, + .driver_data = SAA7134_BOARD_FLYDVBT_LR301, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0331, + .subdevice = 0x1421, + .driver_data = SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x17de, + .subdevice = 0x7201, + .driver_data = SAA7134_BOARD_TEVION_DVBT_220RF, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, /* SAA7135HL */ + .subvendor = 0x17de, + .subdevice = 0x7350, + .driver_data = SAA7134_BOARD_KWORLD_ATSC110, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, + .subdevice = 0x7360, + .driver_data = SAA7134_BOARD_AVERMEDIA_A169_B, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1461, + .subdevice = 0x6360, + .driver_data = SAA7134_BOARD_AVERMEDIA_A169_B1, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x16be, + .subdevice = 0x0005, + .driver_data = SAA7134_BOARD_MD7134_BRIDGE_2, + },{ /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -3193,13 +3432,15 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_GOTVIEW_7135: case SAA7134_BOARD_KWORLD_TERMINATOR: case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS: + case SAA7134_BOARD_FLYDVBT_LR301: + case SAA7134_BOARD_FLYDVBTDUO: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_MD5044: printk("%s: seems there are two different versions of the MD5044\n" - "%s: (with the same ID) out there. If sound doesn't work for\n" - "%s: you try the audio_clock_override=0x200000 insmod option.\n", - dev->name,dev->name,dev->name); + "%s: (with the same ID) out there. If sound doesn't work for\n" + "%s: you try the audio_clock_override=0x200000 insmod option.\n", + dev->name,dev->name,dev->name); break; case SAA7134_BOARD_CINERGY400_CARDBUS: /* power-up tuner chip */ @@ -3220,6 +3461,10 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_writeb(SAA7134_GPIO_GPMODE3, 0x08); saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06); break; + case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: + saa_writeb(SAA7134_GPIO_GPMODE3, 0x08); + saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00); + break; case SAA7134_BOARD_AVERMEDIA_CARDBUS: /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff); @@ -3242,6 +3487,13 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_UPMOST_PURPLE_TV: dev->has_remote = SAA7134_REMOTE_I2C; break; + case SAA7134_BOARD_AVERMEDIA_A169_B: + case SAA7134_BOARD_MD7134_BRIDGE_2: + printk("%s: %s: dual saa713x broadcast decoders\n" + "%s: Sorry, none of the inputs to this chip are supported yet.\n" + "%s: Dual decoder functionality is disabled for now, use the other chip.\n", + dev->name,card(dev).name,dev->name,dev->name); + break; } return 0; } @@ -3362,14 +3614,44 @@ int saa7134_board_init2(struct saa7134_dev *dev) } break; case SAA7134_BOARD_PHILIPS_TIGER: + case SAA7134_BOARD_TEVION_DVBT_220RF: case SAA7134_BOARD_ASUSTeK_P7131_DUAL: - /* this is a hybrid board, initialize to analog mode */ + /* this is a hybrid board, initialize to analog mode + * and configure firmware eeprom address + */ { u8 data[] = { 0x3c, 0x33, 0x68}; struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; i2c_transfer(&dev->i2c_adap, &msg, 1); } break; + case SAA7134_BOARD_FLYDVB_TRIO: + { + u8 data[] = { 0x3c, 0x33, 0x62}; + struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + } + break; + case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: + /* make the tda10046 find its eeprom */ + { + u8 data[] = { 0x3c, 0x33, 0x62}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + } + break; + case SAA7134_BOARD_KWORLD_ATSC110: + { + /* enable tuner */ + int i; + static const u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 }; + dev->i2c_client.addr = 0x0a; + for (i = 0; i < 5; i++) + if (2 != i2c_master_send(&dev->i2c_client,&buffer[i*2],2)) + printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n", + dev->name, i); + } + break; } return 0; } diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 028904bd94a2..c98571c9d5a6 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -66,6 +66,11 @@ static unsigned int latency = UNSET; module_param(latency, int, 0444); MODULE_PARM_DESC(latency,"pci latency timer"); +int saa7134_no_overlay=-1; +module_param_named(no_overlay, saa7134_no_overlay, int, 0444); +MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" + " [some VIA/SIS chipsets are known to have problem with overlay]"); + static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; static unsigned int vbi_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; @@ -249,13 +254,12 @@ void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt) /* ------------------------------------------------------------------ */ -void saa7134_dma_free(struct saa7134_dev *dev,struct saa7134_buf *buf) +void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf) { - if (in_interrupt()) - BUG(); + BUG_ON(in_interrupt()); videobuf_waiton(&buf->vb,0,0); - videobuf_dma_pci_unmap(dev->pci, &buf->vb.dma); + videobuf_dma_unmap(q, &buf->vb.dma); videobuf_dma_free(&buf->vb.dma); buf->vb.state = STATE_NEEDS_INIT; } @@ -613,7 +617,7 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, 0); - init_MUTEX(&dev->lock); + mutex_init(&dev->lock); spin_lock_init(&dev->slock); saa7134_track_gpio(dev,"pre-init"); @@ -835,6 +839,22 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, latency = 0x0A; } #endif + if (pci_pci_problems & PCIPCI_FAIL) { + printk(KERN_INFO "%s: quirk: this driver and your " + "chipset may not work together" + " in overlay mode.\n",dev->name); + if (!saa7134_no_overlay) { + printk(KERN_INFO "%s: quirk: overlay " + "mode will be disabled.\n", + dev->name); + saa7134_no_overlay = 1; + } else { + printk(KERN_INFO "%s: quirk: overlay " + "mode will be forced. Use this" + " option at your own risk.\n", + dev->name); + } + } } if (UNSET != latency) { printk(KERN_INFO "%s: setting pci latency timer to %d\n", @@ -937,6 +957,11 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, v4l2_prio_init(&dev->prio); /* register v4l devices */ + if (saa7134_no_overlay <= 0) { + saa7134_video_template.type |= VID_TYPE_OVERLAY; + } else { + printk("%s: Overlay support disabled.\n",dev->name); + } dev->video_dev = vdev_init(dev,&saa7134_video_template,"video"); err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER, video_nr[dev->nr]); diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 9db8e13f21c3..86cfdb8514cb 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -32,6 +32,7 @@ #include "saa7134-reg.h" #include "saa7134.h" #include <media/v4l2-common.h> +#include "dvb-pll.h" #ifdef HAVE_MT352 # include "mt352.h" @@ -42,7 +43,6 @@ #endif #ifdef HAVE_NXT200X # include "nxt200x.h" -# include "dvb-pll.h" #endif MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); @@ -114,6 +114,24 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) return 0; } +static int mt352_aver777_init(struct dvb_frontend* fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) @@ -146,6 +164,15 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, return 0; } +static int mt352_aver777_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8* pllbuf) +{ + pllbuf[0] = 0xc2; + dvb_pll_configure(&dvb_pll_philips_td1316, pllbuf+1, + params->frequency, + params->u.ofdm.bandwidth); + return 0; +} + static struct mt352_config pinnacle_300i = { .demod_address = 0x3c >> 1, .adc_clock = 20333, @@ -154,6 +181,12 @@ static struct mt352_config pinnacle_300i = { .demod_init = mt352_pinnacle_init, .pll_set = mt352_pinnacle_pll_set, }; + +static struct mt352_config avermedia_777 = { + .demod_address = 0xf, + .demod_init = mt352_aver777_init, + .pll_set = mt352_aver777_pll_set, +}; #endif /* ------------------------------------------------------------------ */ @@ -781,7 +814,7 @@ static int philips_tiger_pll_set(struct dvb_frontend *fe, struct dvb_frontend_pa tda8290_msg.buf = tda8290_open; i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); return ret; -}; +} static int philips_tiger_dvb_mode(struct dvb_frontend *fe) { @@ -817,6 +850,110 @@ static struct tda1004x_config philips_tiger_config = { .request_firmware = NULL, }; +/* ------------------------------------------------------------------ */ + +static int lifeview_trio_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + + ret = philips_tda827xa_pll_set(0x60, fe, params); + return ret; +} + +static int lifeview_trio_dvb_mode(struct dvb_frontend *fe) +{ + return 0; +} + +static void lifeview_trio_analog_mode(struct dvb_frontend *fe) +{ + philips_tda827xa_pll_sleep(0x60, fe); +} + +static struct tda1004x_config lifeview_trio_config = { + .demod_address = 0x09, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GPL, + .if_freq = TDA10046_FREQ_045, + .pll_init = lifeview_trio_dvb_mode, + .pll_set = lifeview_trio_pll_set, + .pll_sleep = lifeview_trio_analog_mode, + .request_firmware = NULL, +}; + +/* ------------------------------------------------------------------ */ + +static int ads_duo_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + + ret = philips_tda827xa_pll_set(0x61, fe, params); + return ret; +} + +static int ads_duo_dvb_mode(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + /* route TDA8275a AGC input to the channel decoder */ + saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x60); + return 0; +} + +static void ads_duo_analog_mode(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + /* route TDA8275a AGC input to the analog IF chip*/ + saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x20); + philips_tda827xa_pll_sleep( 0x61, fe); +} + +static struct tda1004x_config ads_tech_duo_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GPL, + .if_freq = TDA10046_FREQ_045, + .pll_init = ads_duo_dvb_mode, + .pll_set = ads_duo_pll_set, + .pll_sleep = ads_duo_analog_mode, + .request_firmware = NULL, +}; + +/* ------------------------------------------------------------------ */ + +static int tevion_dvb220rf_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + ret = philips_tda827xa_pll_set(0x60, fe, params); + return ret; +} + +static int tevion_dvb220rf_pll_init(struct dvb_frontend *fe) +{ + return 0; +} + +static void tevion_dvb220rf_pll_sleep(struct dvb_frontend *fe) +{ + philips_tda827xa_pll_sleep( 0x61, fe); +} + +static struct tda1004x_config tevion_dvbt220rf_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .if_freq = TDA10046_FREQ_045, + .pll_init = tevion_dvb220rf_pll_init, + .pll_set = tevion_dvb220rf_pll_set, + .pll_sleep = tevion_dvb220rf_pll_sleep, + .request_firmware = NULL, +}; + #endif /* ------------------------------------------------------------------ */ @@ -827,6 +964,22 @@ static struct nxt200x_config avertvhda180 = { .pll_address = 0x61, .pll_desc = &dvb_pll_tdhu2, }; + +static int nxt200x_set_pll_input(u8 *buf, int input) +{ + if (input) + buf[3] |= 0x08; + else + buf[3] &= ~0x08; + return 0; +} + +static struct nxt200x_config kworldatsc110 = { + .demod_address = 0x0a, + .pll_address = 0x61, + .pll_desc = &dvb_pll_tuv1236d, + .set_pll_input = nxt200x_set_pll_input, +}; #endif /* ------------------------------------------------------------------ */ @@ -851,6 +1004,12 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend = mt352_attach(&pinnacle_300i, &dev->i2c_adap); break; + + case SAA7134_BOARD_AVERMEDIA_777: + printk("%s: avertv 777 dvb setup\n",dev->name); + dev->dvb.frontend = mt352_attach(&avermedia_777, + &dev->i2c_adap); + break; #endif #ifdef HAVE_TDA1004X case SAA7134_BOARD_MD7134: @@ -889,11 +1048,30 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend = tda10046_attach(&philips_tiger_config, &dev->i2c_adap); break; + case SAA7134_BOARD_FLYDVBT_LR301: + dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_FLYDVB_TRIO: + dev->dvb.frontend = tda10046_attach(&lifeview_trio_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: + dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_TEVION_DVBT_220RF: + dev->dvb.frontend = tda10046_attach(&tevion_dvbt220rf_config, + &dev->i2c_adap); + break; #endif #ifdef HAVE_NXT200X case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: dev->dvb.frontend = nxt200x_attach(&avertvhda180, &dev->i2c_adap); break; + case SAA7134_BOARD_KWORLD_ATSC110: + dev->dvb.frontend = nxt200x_attach(&kworldatsc110, &dev->i2c_adap); + break; #endif default: printk("%s: Huh? unknown DVB card?\n",dev->name); diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index bd4c389d4c37..1d972edb3be6 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -89,7 +89,7 @@ static int ts_open(struct inode *inode, struct file *file) dprintk("open minor=%d\n",minor); err = -EBUSY; - if (down_trylock(&dev->empress_tsq.lock)) + if (!mutex_trylock(&dev->empress_tsq.lock)) goto done; if (dev->empress_users) goto done_up; @@ -99,7 +99,7 @@ static int ts_open(struct inode *inode, struct file *file) err = 0; done_up: - up(&dev->empress_tsq.lock); + mutex_unlock(&dev->empress_tsq.lock); done: return err; } @@ -110,7 +110,7 @@ static int ts_release(struct inode *inode, struct file *file) if (dev->empress_tsq.streaming) videobuf_streamoff(&dev->empress_tsq); - down(&dev->empress_tsq.lock); + mutex_lock(&dev->empress_tsq.lock); if (dev->empress_tsq.reading) videobuf_read_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); @@ -119,7 +119,7 @@ static int ts_release(struct inode *inode, struct file *file) /* stop the encoder */ ts_reset_encoder(dev); - up(&dev->empress_tsq.lock); + mutex_unlock(&dev->empress_tsq.lock); return 0; } diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 82d28cbf289f..1426e4c8602f 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -42,485 +42,6 @@ MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); #define i2cdprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) -/* ---------------------------------------------------------------------- */ - -static IR_KEYTAB_TYPE flyvideo_codes[IR_KEYTAB_SIZE] = { - [ 15 ] = KEY_KP0, - [ 3 ] = KEY_KP1, - [ 4 ] = KEY_KP2, - [ 5 ] = KEY_KP3, - [ 7 ] = KEY_KP4, - [ 8 ] = KEY_KP5, - [ 9 ] = KEY_KP6, - [ 11 ] = KEY_KP7, - [ 12 ] = KEY_KP8, - [ 13 ] = KEY_KP9, - - [ 14 ] = KEY_MODE, // Air/Cable - [ 17 ] = KEY_VIDEO, // Video - [ 21 ] = KEY_AUDIO, // Audio - [ 0 ] = KEY_POWER, // Power - [ 24 ] = KEY_TUNER, // AV Source - [ 2 ] = KEY_ZOOM, // Fullscreen - [ 26 ] = KEY_LANGUAGE, // Stereo - [ 27 ] = KEY_MUTE, // Mute - [ 20 ] = KEY_VOLUMEUP, // Volume + - [ 23 ] = KEY_VOLUMEDOWN, // Volume - - [ 18 ] = KEY_CHANNELUP, // Channel + - [ 19 ] = KEY_CHANNELDOWN, // Channel - - [ 6 ] = KEY_AGAIN, // Recall - [ 16 ] = KEY_ENTER, // Enter -}; - - -static IR_KEYTAB_TYPE cinergy_codes[IR_KEYTAB_SIZE] = { - [ 0 ] = KEY_KP0, - [ 1 ] = KEY_KP1, - [ 2 ] = KEY_KP2, - [ 3 ] = KEY_KP3, - [ 4 ] = KEY_KP4, - [ 5 ] = KEY_KP5, - [ 6 ] = KEY_KP6, - [ 7 ] = KEY_KP7, - [ 8 ] = KEY_KP8, - [ 9 ] = KEY_KP9, - - [ 0x0a ] = KEY_POWER, - [ 0x0b ] = KEY_PROG1, // app - [ 0x0c ] = KEY_ZOOM, // zoom/fullscreen - [ 0x0d ] = KEY_CHANNELUP, // channel - [ 0x0e ] = KEY_CHANNELDOWN, // channel- - [ 0x0f ] = KEY_VOLUMEUP, - [ 0x10 ] = KEY_VOLUMEDOWN, - [ 0x11 ] = KEY_TUNER, // AV - [ 0x12 ] = KEY_NUMLOCK, // -/-- - [ 0x13 ] = KEY_AUDIO, // audio - [ 0x14 ] = KEY_MUTE, - [ 0x15 ] = KEY_UP, - [ 0x16 ] = KEY_DOWN, - [ 0x17 ] = KEY_LEFT, - [ 0x18 ] = KEY_RIGHT, - [ 0x19 ] = BTN_LEFT, - [ 0x1a ] = BTN_RIGHT, - [ 0x1b ] = KEY_WWW, // text - [ 0x1c ] = KEY_REWIND, - [ 0x1d ] = KEY_FORWARD, - [ 0x1e ] = KEY_RECORD, - [ 0x1f ] = KEY_PLAY, - [ 0x20 ] = KEY_PREVIOUSSONG, - [ 0x21 ] = KEY_NEXTSONG, - [ 0x22 ] = KEY_PAUSE, - [ 0x23 ] = KEY_STOP, -}; - -/* Alfons Geser <a.geser@cox.net> - * updates from Job D. R. Borges <jobdrb@ig.com.br> */ -static IR_KEYTAB_TYPE eztv_codes[IR_KEYTAB_SIZE] = { - [ 18 ] = KEY_POWER, - [ 1 ] = KEY_TV, // DVR - [ 21 ] = KEY_DVD, // DVD - [ 23 ] = KEY_AUDIO, // music - // DVR mode / DVD mode / music mode - - [ 27 ] = KEY_MUTE, // mute - [ 2 ] = KEY_LANGUAGE, // MTS/SAP / audio / autoseek - [ 30 ] = KEY_SUBTITLE, // closed captioning / subtitle / seek - [ 22 ] = KEY_ZOOM, // full screen - [ 28 ] = KEY_VIDEO, // video source / eject / delall - [ 29 ] = KEY_RESTART, // playback / angle / del - [ 47 ] = KEY_SEARCH, // scan / menu / playlist - [ 48 ] = KEY_CHANNEL, // CH surfing / bookmark / memo - - [ 49 ] = KEY_HELP, // help - [ 50 ] = KEY_MODE, // num/memo - [ 51 ] = KEY_ESC, // cancel - - [ 12 ] = KEY_UP, // up - [ 16 ] = KEY_DOWN, // down - [ 8 ] = KEY_LEFT, // left - [ 4 ] = KEY_RIGHT, // right - [ 3 ] = KEY_SELECT, // select - - [ 31 ] = KEY_REWIND, // rewind - [ 32 ] = KEY_PLAYPAUSE, // play/pause - [ 41 ] = KEY_FORWARD, // forward - [ 20 ] = KEY_AGAIN, // repeat - [ 43 ] = KEY_RECORD, // recording - [ 44 ] = KEY_STOP, // stop - [ 45 ] = KEY_PLAY, // play - [ 46 ] = KEY_SHUFFLE, // snapshot / shuffle - - [ 0 ] = KEY_KP0, - [ 5 ] = KEY_KP1, - [ 6 ] = KEY_KP2, - [ 7 ] = KEY_KP3, - [ 9 ] = KEY_KP4, - [ 10 ] = KEY_KP5, - [ 11 ] = KEY_KP6, - [ 13 ] = KEY_KP7, - [ 14 ] = KEY_KP8, - [ 15 ] = KEY_KP9, - - [ 42 ] = KEY_VOLUMEUP, - [ 17 ] = KEY_VOLUMEDOWN, - [ 24 ] = KEY_CHANNELUP, // CH.tracking up - [ 25 ] = KEY_CHANNELDOWN, // CH.tracking down - - [ 19 ] = KEY_KPENTER, // enter - [ 33 ] = KEY_KPDOT, // . (decimal dot) -}; - -static IR_KEYTAB_TYPE avacssmart_codes[IR_KEYTAB_SIZE] = { - [ 30 ] = KEY_POWER, // power - [ 28 ] = KEY_SEARCH, // scan - [ 7 ] = KEY_SELECT, // source - - [ 22 ] = KEY_VOLUMEUP, - [ 20 ] = KEY_VOLUMEDOWN, - [ 31 ] = KEY_CHANNELUP, - [ 23 ] = KEY_CHANNELDOWN, - [ 24 ] = KEY_MUTE, - - [ 2 ] = KEY_KP0, - [ 1 ] = KEY_KP1, - [ 11 ] = KEY_KP2, - [ 27 ] = KEY_KP3, - [ 5 ] = KEY_KP4, - [ 9 ] = KEY_KP5, - [ 21 ] = KEY_KP6, - [ 6 ] = KEY_KP7, - [ 10 ] = KEY_KP8, - [ 18 ] = KEY_KP9, - [ 16 ] = KEY_KPDOT, - - [ 3 ] = KEY_TUNER, // tv/fm - [ 4 ] = KEY_REWIND, // fm tuning left or function left - [ 12 ] = KEY_FORWARD, // fm tuning right or function right - - [ 0 ] = KEY_RECORD, - [ 8 ] = KEY_STOP, - [ 17 ] = KEY_PLAY, - - [ 25 ] = KEY_ZOOM, - [ 14 ] = KEY_MENU, // function - [ 19 ] = KEY_AGAIN, // recall - [ 29 ] = KEY_RESTART, // reset - [ 26 ] = KEY_SHUFFLE, // snapshot/shuffle - -// FIXME - [ 13 ] = KEY_F21, // mts - [ 15 ] = KEY_F22, // min -}; - -/* Alex Hermann <gaaf@gmx.net> */ -static IR_KEYTAB_TYPE md2819_codes[IR_KEYTAB_SIZE] = { - [ 40 ] = KEY_KP1, - [ 24 ] = KEY_KP2, - [ 56 ] = KEY_KP3, - [ 36 ] = KEY_KP4, - [ 20 ] = KEY_KP5, - [ 52 ] = KEY_KP6, - [ 44 ] = KEY_KP7, - [ 28 ] = KEY_KP8, - [ 60 ] = KEY_KP9, - [ 34 ] = KEY_KP0, - - [ 32 ] = KEY_TV, // TV/FM - [ 16 ] = KEY_CD, // CD - [ 48 ] = KEY_TEXT, // TELETEXT - [ 0 ] = KEY_POWER, // POWER - - [ 8 ] = KEY_VIDEO, // VIDEO - [ 4 ] = KEY_AUDIO, // AUDIO - [ 12 ] = KEY_ZOOM, // FULL SCREEN - - [ 18 ] = KEY_SUBTITLE, // DISPLAY - ??? - [ 50 ] = KEY_REWIND, // LOOP - ??? - [ 2 ] = KEY_PRINT, // PREVIEW - ??? - - [ 42 ] = KEY_SEARCH, // AUTOSCAN - [ 26 ] = KEY_SLEEP, // FREEZE - ??? - [ 58 ] = KEY_SHUFFLE, // SNAPSHOT - ??? - [ 10 ] = KEY_MUTE, // MUTE - - [ 38 ] = KEY_RECORD, // RECORD - [ 22 ] = KEY_PAUSE, // PAUSE - [ 54 ] = KEY_STOP, // STOP - [ 6 ] = KEY_PLAY, // PLAY - - [ 46 ] = KEY_RED, // <RED> - [ 33 ] = KEY_GREEN, // <GREEN> - [ 14 ] = KEY_YELLOW, // <YELLOW> - [ 1 ] = KEY_BLUE, // <BLUE> - - [ 30 ] = KEY_VOLUMEDOWN, // VOLUME- - [ 62 ] = KEY_VOLUMEUP, // VOLUME+ - [ 17 ] = KEY_CHANNELDOWN, // CHANNEL/PAGE- - [ 49 ] = KEY_CHANNELUP // CHANNEL/PAGE+ -}; - -static IR_KEYTAB_TYPE videomate_tv_pvr_codes[IR_KEYTAB_SIZE] = { - [ 20 ] = KEY_MUTE, - [ 36 ] = KEY_ZOOM, - - [ 1 ] = KEY_DVD, - [ 35 ] = KEY_RADIO, - [ 0 ] = KEY_TV, - - [ 10 ] = KEY_REWIND, - [ 8 ] = KEY_PLAYPAUSE, - [ 15 ] = KEY_FORWARD, - - [ 2 ] = KEY_PREVIOUS, - [ 7 ] = KEY_STOP, - [ 6 ] = KEY_NEXT, - - [ 12 ] = KEY_UP, - [ 14 ] = KEY_DOWN, - [ 11 ] = KEY_LEFT, - [ 13 ] = KEY_RIGHT, - [ 17 ] = KEY_OK, - - [ 3 ] = KEY_MENU, - [ 9 ] = KEY_SETUP, - [ 5 ] = KEY_VIDEO, - [ 34 ] = KEY_CHANNEL, - - [ 18 ] = KEY_VOLUMEUP, - [ 21 ] = KEY_VOLUMEDOWN, - [ 16 ] = KEY_CHANNELUP, - [ 19 ] = KEY_CHANNELDOWN, - - [ 4 ] = KEY_RECORD, - - [ 22 ] = KEY_KP1, - [ 23 ] = KEY_KP2, - [ 24 ] = KEY_KP3, - [ 25 ] = KEY_KP4, - [ 26 ] = KEY_KP5, - [ 27 ] = KEY_KP6, - [ 28 ] = KEY_KP7, - [ 29 ] = KEY_KP8, - [ 30 ] = KEY_KP9, - [ 31 ] = KEY_KP0, - - [ 32 ] = KEY_LANGUAGE, - [ 33 ] = KEY_SLEEP, -}; - -/* Michael Tokarev <mjt@tls.msk.ru> - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg - keytable is used by MANLI MTV00[12] and BeholdTV 40[13] at - least, and probably other cards too. - The "ascii-art picture" below (in comments, first row - is the keycode in hex, and subsequent row(s) shows - the button labels (several variants when appropriate) - helps to descide which keycodes to assign to the buttons. - */ -static IR_KEYTAB_TYPE manli_codes[IR_KEYTAB_SIZE] = { - - /* 0x1c 0x12 * - * FUNCTION POWER * - * FM (|) * - * */ - [ 0x1c ] = KEY_RADIO, /*XXX*/ - [ 0x12 ] = KEY_POWER, - - /* 0x01 0x02 0x03 * - * 1 2 3 * - * * - * 0x04 0x05 0x06 * - * 4 5 6 * - * * - * 0x07 0x08 0x09 * - * 7 8 9 * - * */ - [ 0x01 ] = KEY_KP1, - [ 0x02 ] = KEY_KP2, - [ 0x03 ] = KEY_KP3, - [ 0x04 ] = KEY_KP4, - [ 0x05 ] = KEY_KP5, - [ 0x06 ] = KEY_KP6, - [ 0x07 ] = KEY_KP7, - [ 0x08 ] = KEY_KP8, - [ 0x09 ] = KEY_KP9, - - /* 0x0a 0x00 0x17 * - * RECALL 0 +100 * - * PLUS * - * */ - [ 0x0a ] = KEY_AGAIN, /*XXX KEY_REWIND? */ - [ 0x00 ] = KEY_KP0, - [ 0x17 ] = KEY_DIGITS, /*XXX*/ - - /* 0x14 0x10 * - * MENU INFO * - * OSD */ - [ 0x14 ] = KEY_MENU, - [ 0x10 ] = KEY_INFO, - - /* 0x0b * - * Up * - * * - * 0x18 0x16 0x0c * - * Left Ok Right * - * * - * 0x015 * - * Down * - * */ - [ 0x0b ] = KEY_UP, /*XXX KEY_SCROLLUP? */ - [ 0x18 ] = KEY_LEFT, /*XXX KEY_BACK? */ - [ 0x16 ] = KEY_OK, /*XXX KEY_SELECT? KEY_ENTER? */ - [ 0x0c ] = KEY_RIGHT, /*XXX KEY_FORWARD? */ - [ 0x15 ] = KEY_DOWN, /*XXX KEY_SCROLLDOWN? */ - - /* 0x11 0x0d * - * TV/AV MODE * - * SOURCE STEREO * - * */ - [ 0x11 ] = KEY_TV, /*XXX*/ - [ 0x0d ] = KEY_MODE, /*XXX there's no KEY_STEREO */ - - /* 0x0f 0x1b 0x1a * - * AUDIO Vol+ Chan+ * - * TIMESHIFT??? * - * * - * 0x0e 0x1f 0x1e * - * SLEEP Vol- Chan- * - * */ - [ 0x0f ] = KEY_AUDIO, - [ 0x1b ] = KEY_VOLUMEUP, - [ 0x1a ] = KEY_CHANNELUP, - [ 0x0e ] = KEY_SLEEP, /*XXX maybe KEY_PAUSE */ - [ 0x1f ] = KEY_VOLUMEDOWN, - [ 0x1e ] = KEY_CHANNELDOWN, - - /* 0x13 0x19 * - * MUTE SNAPSHOT* - * */ - [ 0x13 ] = KEY_MUTE, - [ 0x19 ] = KEY_RECORD, /*XXX*/ - - // 0x1d unused ? -}; - - -/* Mike Baikov <mike@baikov.com> */ -static IR_KEYTAB_TYPE gotview7135_codes[IR_KEYTAB_SIZE] = { - - [ 33 ] = KEY_POWER, - [ 105] = KEY_TV, - [ 51 ] = KEY_KP0, - [ 81 ] = KEY_KP1, - [ 49 ] = KEY_KP2, - [ 113] = KEY_KP3, - [ 59 ] = KEY_KP4, - [ 88 ] = KEY_KP5, - [ 65 ] = KEY_KP6, - [ 72 ] = KEY_KP7, - [ 48 ] = KEY_KP8, - [ 83 ] = KEY_KP9, - [ 115] = KEY_AGAIN, /* LOOP */ - [ 10 ] = KEY_AUDIO, - [ 97 ] = KEY_PRINT, /* PREVIEW */ - [ 122] = KEY_VIDEO, - [ 32 ] = KEY_CHANNELUP, - [ 64 ] = KEY_CHANNELDOWN, - [ 24 ] = KEY_VOLUMEDOWN, - [ 80 ] = KEY_VOLUMEUP, - [ 16 ] = KEY_MUTE, - [ 74 ] = KEY_SEARCH, - [ 123] = KEY_SHUFFLE, /* SNAPSHOT */ - [ 34 ] = KEY_RECORD, - [ 98 ] = KEY_STOP, - [ 120] = KEY_PLAY, - [ 57 ] = KEY_REWIND, - [ 89 ] = KEY_PAUSE, - [ 25 ] = KEY_FORWARD, - [ 9 ] = KEY_ZOOM, - - [ 82 ] = KEY_F21, /* LIVE TIMESHIFT */ - [ 26 ] = KEY_F22, /* MIN TIMESHIFT */ - [ 58 ] = KEY_F23, /* TIMESHIFT */ - [ 112] = KEY_F24, /* NORMAL TIMESHIFT */ -}; - -static IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = { - [ 0x3 ] = KEY_POWER, - [ 0x6f ] = KEY_MUTE, - [ 0x10 ] = KEY_BACKSPACE, /* Recall */ - - [ 0x11 ] = KEY_KP0, - [ 0x4 ] = KEY_KP1, - [ 0x5 ] = KEY_KP2, - [ 0x6 ] = KEY_KP3, - [ 0x8 ] = KEY_KP4, - [ 0x9 ] = KEY_KP5, - [ 0xa ] = KEY_KP6, - [ 0xc ] = KEY_KP7, - [ 0xd ] = KEY_KP8, - [ 0xe ] = KEY_KP9, - [ 0x12 ] = KEY_KPDOT, /* 100+ */ - - [ 0x7 ] = KEY_VOLUMEUP, - [ 0xb ] = KEY_VOLUMEDOWN, - [ 0x1a ] = KEY_KPPLUS, - [ 0x18 ] = KEY_KPMINUS, - [ 0x15 ] = KEY_UP, - [ 0x1d ] = KEY_DOWN, - [ 0xf ] = KEY_CHANNELUP, - [ 0x13 ] = KEY_CHANNELDOWN, - [ 0x48 ] = KEY_ZOOM, - - [ 0x1b ] = KEY_VIDEO, /* Video source */ - [ 0x49 ] = KEY_LANGUAGE, /* MTS Select */ - [ 0x19 ] = KEY_SEARCH, /* Auto Scan */ - - [ 0x4b ] = KEY_RECORD, - [ 0x46 ] = KEY_PLAY, - [ 0x45 ] = KEY_PAUSE, /* Pause */ - [ 0x44 ] = KEY_STOP, - [ 0x40 ] = KEY_FORWARD, /* Forward ? */ - [ 0x42 ] = KEY_REWIND, /* Backward ? */ - -}; - -/* Mapping for the 28 key remote control as seen at - http://www.sednacomputer.com/photo/cardbus-tv.jpg - Pavel Mihaylov <bin@bash.info> */ -static IR_KEYTAB_TYPE pctv_sedna_codes[IR_KEYTAB_SIZE] = { - [ 0 ] = KEY_KP0, - [ 1 ] = KEY_KP1, - [ 2 ] = KEY_KP2, - [ 3 ] = KEY_KP3, - [ 4 ] = KEY_KP4, - [ 5 ] = KEY_KP5, - [ 6 ] = KEY_KP6, - [ 7 ] = KEY_KP7, - [ 8 ] = KEY_KP8, - [ 9 ] = KEY_KP9, - - [ 0x0a ] = KEY_AGAIN, /* Recall */ - [ 0x0b ] = KEY_CHANNELUP, - [ 0x0c ] = KEY_VOLUMEUP, - [ 0x0d ] = KEY_MODE, /* Stereo */ - [ 0x0e ] = KEY_STOP, - [ 0x0f ] = KEY_PREVIOUSSONG, - [ 0x10 ] = KEY_ZOOM, - [ 0x11 ] = KEY_TUNER, /* Source */ - [ 0x12 ] = KEY_POWER, - [ 0x13 ] = KEY_MUTE, - [ 0x15 ] = KEY_CHANNELDOWN, - [ 0x18 ] = KEY_VOLUMEDOWN, - [ 0x19 ] = KEY_SHUFFLE, /* Snapshot */ - [ 0x1a ] = KEY_NEXTSONG, - [ 0x1b ] = KEY_TEXT, /* Time Shift */ - [ 0x1c ] = KEY_RADIO, /* FM Radio */ - [ 0x1d ] = KEY_RECORD, - [ 0x1e ] = KEY_PAUSE, -}; - - /* -------------------- GPIO generic keycode builder -------------------- */ static int build_key(struct saa7134_dev *dev) @@ -628,27 +149,27 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_FLYVIDEO3000: case SAA7134_BOARD_FLYTVPLATINUM_FM: case SAA7134_BOARD_FLYTVPLATINUM_MINI2: - ir_codes = flyvideo_codes; + ir_codes = ir_codes_flyvideo; mask_keycode = 0xEC00000; mask_keydown = 0x0040000; break; case SAA7134_BOARD_CINERGY400: case SAA7134_BOARD_CINERGY600: case SAA7134_BOARD_CINERGY600_MK3: - ir_codes = cinergy_codes; + ir_codes = ir_codes_cinergy; mask_keycode = 0x00003f; mask_keyup = 0x040000; break; case SAA7134_BOARD_ECS_TVP3XP: case SAA7134_BOARD_ECS_TVP3XP_4CB5: - ir_codes = eztv_codes; + ir_codes = ir_codes_eztv; mask_keycode = 0x00017c; mask_keyup = 0x000002; polling = 50; // ms break; case SAA7134_BOARD_KWORLD_XPERT: case SAA7134_BOARD_AVACSSMARTTV: - ir_codes = avacssmart_codes; + ir_codes = ir_codes_pixelview; mask_keycode = 0x00001F; mask_keyup = 0x000020; polling = 50; // ms @@ -660,7 +181,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_STUDIO_305: case SAA7134_BOARD_AVERMEDIA_STUDIO_307: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: - ir_codes = md2819_codes; + ir_codes = ir_codes_avermedia; mask_keycode = 0x0007C8; mask_keydown = 0x000010; polling = 50; // ms @@ -669,7 +190,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); break; case SAA7134_BOARD_KWORLD_TERMINATOR: - ir_codes = avacssmart_codes; + ir_codes = ir_codes_pixelview; mask_keycode = 0x00001f; mask_keyup = 0x000060; polling = 50; // ms @@ -677,19 +198,19 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: case SAA7134_BOARD_BEHOLD_409FM: - ir_codes = manli_codes; + ir_codes = ir_codes_manli; mask_keycode = 0x001f00; mask_keyup = 0x004000; polling = 50; // ms break; case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS: - ir_codes = pctv_sedna_codes; + ir_codes = ir_codes_pctv_sedna; mask_keycode = 0x001f00; mask_keyup = 0x004000; polling = 50; // ms break; case SAA7134_BOARD_GOTVIEW_7135: - ir_codes = gotview7135_codes; + ir_codes = ir_codes_gotview7135; mask_keycode = 0x0003EC; mask_keyup = 0x008000; mask_keydown = 0x000010; @@ -698,17 +219,23 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII: - ir_codes = videomate_tv_pvr_codes; + ir_codes = ir_codes_videomate_tv_pvr; mask_keycode = 0x00003F; mask_keyup = 0x400000; polling = 50; // ms break; case SAA7134_BOARD_VIDEOMATE_DVBT_300: case SAA7134_BOARD_VIDEOMATE_DVBT_200: - ir_codes = videomate_tv_pvr_codes; + ir_codes = ir_codes_videomate_tv_pvr; mask_keycode = 0x003F00; mask_keyup = 0x040000; break; + case SAA7134_BOARD_FLYDVBT_LR301: + case SAA7134_BOARD_FLYDVBTDUO: + ir_codes = ir_codes_flydvb; + mask_keycode = 0x0001F00; + mask_keydown = 0x0040000; + break; } if (NULL == ir_codes) { printk("%s: Oops: IR config error [card=%d]\n", diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c index 7448e386a804..7aa02b34e012 100644 --- a/drivers/media/video/saa7134/saa7134-oss.c +++ b/drivers/media/video/saa7134/saa7134-oss.c @@ -84,8 +84,7 @@ static int dsp_buffer_init(struct saa7134_dev *dev) { int err; - if (!dev->dmasound.bufsize) - BUG(); + BUG_ON(!dev->dmasound.bufsize); videobuf_dma_init(&dev->dmasound.dma); err = videobuf_dma_init_kernel(&dev->dmasound.dma, PCI_DMA_FROMDEVICE, (dev->dmasound.bufsize + PAGE_SIZE) >> PAGE_SHIFT); @@ -96,8 +95,7 @@ static int dsp_buffer_init(struct saa7134_dev *dev) static int dsp_buffer_free(struct saa7134_dev *dev) { - if (!dev->dmasound.blksize) - BUG(); + BUG_ON(!dev->dmasound.blksize); videobuf_dma_free(&dev->dmasound.dma); dev->dmasound.blocks = 0; dev->dmasound.blksize = 0; @@ -126,7 +124,7 @@ static int dsp_rec_start(struct saa7134_dev *dev) unsigned long flags; /* prepare buffer */ - if (0 != (err = videobuf_dma_pci_map(dev->pci,&dev->dmasound.dma))) + if (0 != (err = videobuf_pci_dma_map(dev->pci,&dev->dmasound.dma))) return err; if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) goto fail1; @@ -215,7 +213,7 @@ static int dsp_rec_start(struct saa7134_dev *dev) fail2: saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); fail1: - videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); + videobuf_pci_dma_unmap(dev->pci,&dev->dmasound.dma); return err; } @@ -233,7 +231,7 @@ static int dsp_rec_stop(struct saa7134_dev *dev) /* unlock buffer */ saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); - videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); + videobuf_pci_dma_unmap(dev->pci,&dev->dmasound.dma); return 0; } @@ -254,7 +252,7 @@ static int dsp_open(struct inode *inode, struct file *file) if (NULL == dev) return -ENODEV; - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); err = -EBUSY; if (dev->dmasound.users_dsp) goto fail1; @@ -270,13 +268,13 @@ static int dsp_open(struct inode *inode, struct file *file) if (0 != err) goto fail2; - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); return 0; fail2: dev->dmasound.users_dsp--; fail1: - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); return err; } @@ -284,13 +282,13 @@ static int dsp_release(struct inode *inode, struct file *file) { struct saa7134_dev *dev = file->private_data; - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); if (dev->dmasound.recording_on) dsp_rec_stop(dev); dsp_buffer_free(dev); dev->dmasound.users_dsp--; file->private_data = NULL; - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); return 0; } @@ -304,7 +302,7 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, int err,ret = 0; add_wait_queue(&dev->dmasound.wq, &wait); - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); while (count > 0) { /* wait for data if needed */ if (0 == dev->dmasound.read_count) { @@ -328,12 +326,12 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, ret = -EAGAIN; break; } - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); set_current_state(TASK_INTERRUPTIBLE); if (0 == dev->dmasound.read_count) schedule(); set_current_state(TASK_RUNNING); - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); if (signal_pending(current)) { if (0 == ret) ret = -EINTR; @@ -362,7 +360,7 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, if (dev->dmasound.read_offset == dev->dmasound.bufsize) dev->dmasound.read_offset = 0; } - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); remove_wait_queue(&dev->dmasound.wq, &wait); return ret; } @@ -435,13 +433,13 @@ static int dsp_ioctl(struct inode *inode, struct file *file, case SNDCTL_DSP_STEREO: if (get_user(val, p)) return -EFAULT; - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); dev->dmasound.channels = val ? 2 : 1; if (dev->dmasound.recording_on) { dsp_rec_stop(dev); dsp_rec_start(dev); } - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); return put_user(dev->dmasound.channels-1, p); case SNDCTL_DSP_CHANNELS: @@ -449,13 +447,13 @@ static int dsp_ioctl(struct inode *inode, struct file *file, return -EFAULT; if (val != 1 && val != 2) return -EINVAL; - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); dev->dmasound.channels = val; if (dev->dmasound.recording_on) { dsp_rec_stop(dev); dsp_rec_start(dev); } - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); /* fall through */ case SOUND_PCM_READ_CHANNELS: return put_user(dev->dmasound.channels, p); @@ -478,13 +476,13 @@ static int dsp_ioctl(struct inode *inode, struct file *file, case AFMT_U16_BE: case AFMT_S16_LE: case AFMT_S16_BE: - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); dev->dmasound.afmt = val; if (dev->dmasound.recording_on) { dsp_rec_stop(dev); dsp_rec_start(dev); } - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); return put_user(dev->dmasound.afmt, p); default: return -EINVAL; @@ -509,10 +507,10 @@ static int dsp_ioctl(struct inode *inode, struct file *file, return 0; case SNDCTL_DSP_RESET: - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); if (dev->dmasound.recording_on) dsp_rec_stop(dev); - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); return 0; case SNDCTL_DSP_GETBLKSIZE: return put_user(dev->dmasound.blksize, p); @@ -556,10 +554,10 @@ static unsigned int dsp_poll(struct file *file, struct poll_table_struct *wait) poll_wait(file, &dev->dmasound.wq, wait); if (0 == dev->dmasound.read_count) { - down(&dev->dmasound.lock); + mutex_lock(&dev->dmasound.lock); if (!dev->dmasound.recording_on) dsp_rec_start(dev); - up(&dev->dmasound.lock); + mutex_unlock(&dev->dmasound.lock); } else mask |= (POLLIN | POLLRDNORM); return mask; @@ -852,7 +850,7 @@ int saa7134_oss_init1(struct saa7134_dev *dev) return -1; /* general */ - init_MUTEX(&dev->dmasound.lock); + mutex_init(&dev->dmasound.lock); init_waitqueue_head(&dev->dmasound.wq); switch (dev->pci->device) { diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 470903e2f5e5..60a90a2617ae 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -89,7 +89,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, return -EINVAL; if (buf->vb.size != size) { - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); } if (STATE_NEEDS_INIT == buf->vb.state) { @@ -98,7 +98,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, buf->vb.size = size; buf->pt = &dev->ts.pt_ts; - err = videobuf_iolock(dev->pci,&buf->vb,NULL); + err = videobuf_iolock(q,&buf->vb,NULL); if (err) goto oops; err = saa7134_pgtable_build(dev->pci,buf->pt, @@ -126,7 +126,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, return 0; oops: - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); return err; } @@ -152,10 +152,9 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { - struct saa7134_dev *dev = q->priv_data; struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); } struct videobuf_queue_ops saa7134_ts_qops = { diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c index afa4dcb3f96d..0db53d192b2a 100644 --- a/drivers/media/video/saa7134/saa7134-tvaudio.c +++ b/drivers/media/video/saa7134/saa7134-tvaudio.c @@ -140,6 +140,12 @@ static struct saa7134_tvaudio tvaudio[] = { .carr2 = 5850, .mode = TVAUDIO_NICAM_AM, },{ + .name = "SECAM-L MONO", + .std = V4L2_STD_SECAM, + .carr1 = 6500, + .carr2 = -1, + .mode = TVAUDIO_AM_MONO, + },{ .name = "SECAM-D/K", .std = V4L2_STD_SECAM, .carr1 = 6500, @@ -334,6 +340,12 @@ static void tvaudio_setmode(struct saa7134_dev *dev, saa_writeb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0xa1); saa_writeb(SAA7134_NICAM_CONFIG, 0x00); break; + case TVAUDIO_AM_MONO: + saa_writeb(SAA7134_DEMODULATOR, 0x12); + saa_writeb(SAA7134_DCXO_IDENT_CTRL, 0x00); + saa_writeb(SAA7134_FM_DEEMPHASIS, 0x44); + saa_writeb(SAA7134_STEREO_DAC_OUTPUT_SELECT, 0xa0); + break; case TVAUDIO_FM_SAT_STEREO: /* not implemented (yet) */ break; @@ -414,6 +426,7 @@ static int tvaudio_getstereo(struct saa7134_dev *dev, struct saa7134_tvaudio *au switch (audio->mode) { case TVAUDIO_FM_MONO: + case TVAUDIO_AM_MONO: return V4L2_TUNER_SUB_MONO; case TVAUDIO_FM_K_STEREO: case TVAUDIO_FM_BG_STEREO: @@ -469,17 +482,20 @@ static int tvaudio_setstereo(struct saa7134_dev *dev, struct saa7134_tvaudio *au [ V4L2_TUNER_MODE_STEREO ] = "stereo", [ V4L2_TUNER_MODE_LANG1 ] = "lang1", [ V4L2_TUNER_MODE_LANG2 ] = "lang2", + [ V4L2_TUNER_MODE_LANG1_LANG2 ] = "lang1+lang2", }; static u32 fm[] = { [ V4L2_TUNER_MODE_MONO ] = 0x00, /* ch1 */ [ V4L2_TUNER_MODE_STEREO ] = 0x80, /* auto */ [ V4L2_TUNER_MODE_LANG1 ] = 0x00, /* ch1 */ [ V4L2_TUNER_MODE_LANG2 ] = 0x01, /* ch2 */ + [ V4L2_TUNER_MODE_LANG1_LANG2 ] = 0x80, /* auto */ }; u32 reg; switch (audio->mode) { case TVAUDIO_FM_MONO: + case TVAUDIO_AM_MONO: /* nothing to do ... */ break; case TVAUDIO_FM_K_STEREO: diff --git a/drivers/media/video/saa7134/saa7134-vbi.c b/drivers/media/video/saa7134/saa7134-vbi.c index f4aee0af80e1..f38366a470fa 100644 --- a/drivers/media/video/saa7134/saa7134-vbi.c +++ b/drivers/media/video/saa7134/saa7134-vbi.c @@ -135,7 +135,7 @@ static int buffer_prepare(struct videobuf_queue *q, return -EINVAL; if (buf->vb.size != size) - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); if (STATE_NEEDS_INIT == buf->vb.state) { buf->vb.width = llength; @@ -143,7 +143,7 @@ static int buffer_prepare(struct videobuf_queue *q, buf->vb.size = size; buf->pt = &fh->pt_vbi; - err = videobuf_iolock(dev->pci,&buf->vb,NULL); + err = videobuf_iolock(q,&buf->vb,NULL); if (err) goto oops; err = saa7134_pgtable_build(dev->pci,buf->pt, @@ -159,7 +159,7 @@ static int buffer_prepare(struct videobuf_queue *q, return 0; oops: - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); return err; } @@ -190,11 +190,9 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { - struct saa7134_fh *fh = q->priv_data; - struct saa7134_dev *dev = fh->dev; struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); } struct videobuf_queue_ops saa7134_vbi_qops = { diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index e97426bc85df..aeef80f88a6b 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -460,17 +460,17 @@ static int res_get(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int return 1; /* is it free? */ - down(&dev->lock); + mutex_lock(&dev->lock); if (dev->resources & bit) { /* no, someone else uses it */ - up(&dev->lock); + mutex_unlock(&dev->lock); return 0; } /* it's free, grab it */ fh->resources |= bit; dev->resources |= bit; dprintk("res: get %d\n",bit); - up(&dev->lock); + mutex_unlock(&dev->lock); return 1; } @@ -489,14 +489,13 @@ int res_locked(struct saa7134_dev *dev, unsigned int bit) static void res_free(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bits) { - if ((fh->resources & bits) != bits) - BUG(); + BUG_ON((fh->resources & bits) != bits); - down(&dev->lock); + mutex_lock(&dev->lock); fh->resources &= ~bits; dev->resources &= ~bits; dprintk("res: put %d\n",bits); - up(&dev->lock); + mutex_unlock(&dev->lock); } /* ------------------------------------------------------------------ */ @@ -994,7 +993,7 @@ static int buffer_prepare(struct videobuf_queue *q, buf->vb.size != size || buf->vb.field != field || buf->fmt != fh->fmt) { - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); } if (STATE_NEEDS_INIT == buf->vb.state) { @@ -1005,7 +1004,7 @@ static int buffer_prepare(struct videobuf_queue *q, buf->fmt = fh->fmt; buf->pt = &fh->pt_cap; - err = videobuf_iolock(dev->pci,&buf->vb,&dev->ovbuf); + err = videobuf_iolock(q,&buf->vb,&dev->ovbuf); if (err) goto oops; err = saa7134_pgtable_build(dev->pci,buf->pt, @@ -1020,7 +1019,7 @@ static int buffer_prepare(struct videobuf_queue *q, return 0; oops: - saa7134_dma_free(dev,buf); + saa7134_dma_free(q,buf); return err; } @@ -1046,10 +1045,9 @@ static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { - struct saa7134_fh *fh = q->priv_data; struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); - saa7134_dma_free(fh->dev,buf); + saa7134_dma_free(q,buf); } static struct videobuf_queue_ops video_qops = { @@ -1340,21 +1338,21 @@ video_poll(struct file *file, struct poll_table_struct *wait) if (!list_empty(&fh->cap.stream)) buf = list_entry(fh->cap.stream.next, struct videobuf_buffer, stream); } else { - down(&fh->cap.lock); + mutex_lock(&fh->cap.lock); if (UNSET == fh->cap.read_off) { /* need to capture a new frame */ if (res_locked(fh->dev,RESOURCE_VIDEO)) { - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return POLLERR; } if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,fh->cap.field)) { - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); return POLLERR; } fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); fh->cap.read_off = 0; } - up(&fh->cap.lock); + mutex_unlock(&fh->cap.lock); buf = fh->cap.read_buf; } @@ -1463,6 +1461,10 @@ static int saa7134_g_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, f->fmt.pix.height * f->fmt.pix.bytesperline; return 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + if (saa7134_no_overlay > 0) { + printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } f->fmt.win = fh->win; return 0; case V4L2_BUF_TYPE_VBI_CAPTURE: @@ -1527,6 +1529,10 @@ static int saa7134_try_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, return 0; } case V4L2_BUF_TYPE_VIDEO_OVERLAY: + if (saa7134_no_overlay > 0) { + printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } err = verify_preview(dev,&f->fmt.win); if (0 != err) return err; @@ -1557,18 +1563,22 @@ static int saa7134_s_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, fh->cap.field = f->fmt.pix.field; return 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + if (saa7134_no_overlay > 0) { + printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } err = verify_preview(dev,&f->fmt.win); if (0 != err) return err; - down(&dev->lock); + mutex_lock(&dev->lock); fh->win = f->fmt.win; fh->nclips = f->fmt.win.clipcount; if (fh->nclips > 8) fh->nclips = 8; if (copy_from_user(fh->clips,f->fmt.win.clips, sizeof(struct v4l2_clip)*fh->nclips)) { - up(&dev->lock); + mutex_unlock(&dev->lock); return -EFAULT; } @@ -1578,7 +1588,7 @@ static int saa7134_s_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, start_preview(dev,fh); spin_unlock_irqrestore(&dev->slock,flags); } - up(&dev->lock); + mutex_unlock(&dev->lock); return 0; case V4L2_BUF_TYPE_VBI_CAPTURE: saa7134_vbi_fmt(dev,f); @@ -1612,9 +1622,9 @@ int saa7134_common_ioctl(struct saa7134_dev *dev, return get_control(dev,arg); case VIDIOC_S_CTRL: { - down(&dev->lock); + mutex_lock(&dev->lock); err = set_control(dev,NULL,arg); - up(&dev->lock); + mutex_unlock(&dev->lock); return err; } /* --- input switching --------------------------------------- */ @@ -1664,9 +1674,9 @@ int saa7134_common_ioctl(struct saa7134_dev *dev, return -EINVAL; if (NULL == card_in(dev,*i).name) return -EINVAL; - down(&dev->lock); + mutex_lock(&dev->lock); video_mux(dev,*i); - up(&dev->lock); + mutex_unlock(&dev->lock); return 0; } @@ -1716,11 +1726,13 @@ static int video_do_ioctl(struct inode *inode, struct file *file, cap->version = SAA7134_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_TUNER; + if (saa7134_no_overlay <= 0) { + cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; + } if ((tuner_type == TUNER_ABSENT) || (tuner_type == UNSET)) cap->capabilities &= ~V4L2_CAP_TUNER; @@ -1766,7 +1778,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, if (i == TVNORMS) return -EINVAL; - down(&dev->lock); + mutex_lock(&dev->lock); if (res_check(fh, RESOURCE_OVERLAY)) { spin_lock_irqsave(&dev->slock,flags); stop_preview(dev,fh); @@ -1776,7 +1788,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, } else set_tvnorm(dev,&tvnorms[i]); saa7134_tvaudio_do_scan(dev); - up(&dev->lock); + mutex_unlock(&dev->lock); return 0; } @@ -1909,13 +1921,13 @@ static int video_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (1 == fh->radio && V4L2_TUNER_RADIO != f->type) return -EINVAL; - down(&dev->lock); + mutex_lock(&dev->lock); dev->ctl_freq = f->frequency; saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,f); saa7134_tvaudio_do_scan(dev); - up(&dev->lock); + mutex_unlock(&dev->lock); return 0; } @@ -1971,6 +1983,10 @@ static int video_do_ioctl(struct inode *inode, struct file *file, switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OVERLAY: + if (saa7134_no_overlay > 0) { + printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } if (index >= FORMATS) return -EINVAL; if (f->type == V4L2_BUF_TYPE_VIDEO_OVERLAY && @@ -2031,6 +2047,11 @@ static int video_do_ioctl(struct inode *inode, struct file *file, int *on = arg; if (*on) { + if (saa7134_no_overlay > 0) { + printk ("no_overlay\n"); + return -EINVAL; + } + if (!res_get(dev,fh,RESOURCE_OVERLAY)) return -EBUSY; spin_lock_irqsave(&dev->slock,flags); @@ -2282,7 +2303,7 @@ static struct file_operations radio_fops = struct video_device saa7134_video_template = { .name = "saa7134-video", - .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY| + .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER| VID_TYPE_CLIPPING|VID_TYPE_SCALES, .hardware = 0, .fops = &video_fops, diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 3261d8bebdd1..31ba293854c1 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -29,11 +29,11 @@ #include <linux/input.h> #include <linux/notifier.h> #include <linux/delay.h> +#include <linux/mutex.h> #include <asm/io.h> #include <media/tuner.h> -#include <media/audiochip.h> #include <media/ir-common.h> #include <media/ir-kbd-i2c.h> #include <media/video-buf.h> @@ -60,6 +60,7 @@ enum saa7134_tvaudio_mode { TVAUDIO_FM_K_STEREO = 4, TVAUDIO_NICAM_AM = 5, TVAUDIO_NICAM_FM = 6, + TVAUDIO_AM_MONO = 7 }; enum saa7134_audio_in { @@ -210,6 +211,15 @@ struct saa7134_format { #define SAA7134_BOARD_MSI_TVATANYWHERE_PLUS 82 #define SAA7134_BOARD_CINERGY250PCI 83 #define SAA7134_BOARD_FLYDVB_TRIO 84 +#define SAA7134_BOARD_AVERMEDIA_777 85 +#define SAA7134_BOARD_FLYDVBT_LR301 86 +#define SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331 87 +#define SAA7134_BOARD_TEVION_DVBT_220RF 88 +#define SAA7134_BOARD_ELSA_700TV 89 +#define SAA7134_BOARD_KWORLD_ATSC110 90 +#define SAA7134_BOARD_AVERMEDIA_A169_B 91 +#define SAA7134_BOARD_AVERMEDIA_A169_B1 92 +#define SAA7134_BOARD_MD7134_BRIDGE_2 93 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 @@ -359,7 +369,7 @@ struct saa7134_fh { /* dmasound dsp status */ struct saa7134_dmasound { - struct semaphore lock; + struct mutex lock; int minor_mixer; int minor_dsp; unsigned int users_dsp; @@ -386,7 +396,7 @@ struct saa7134_dmasound { unsigned int read_offset; unsigned int read_count; void * priv_data; - snd_pcm_substream_t *substream; + struct snd_pcm_substream *substream; }; /* IR input */ @@ -423,7 +433,7 @@ struct saa7134_mpeg_ops { /* global device status */ struct saa7134_dev { struct list_head devlist; - struct semaphore lock; + struct mutex lock; spinlock_t slock; #ifdef VIDIOC_G_PRIORITY struct v4l2_prio_state prio; @@ -546,6 +556,7 @@ struct saa7134_dev { /* saa7134-core.c */ extern struct list_head saa7134_devlist; +extern int saa7134_no_overlay; void saa7134_track_gpio(struct saa7134_dev *dev, char *msg); @@ -567,7 +578,7 @@ void saa7134_buffer_finish(struct saa7134_dev *dev, struct saa7134_dmaqueue *q, unsigned int state); void saa7134_buffer_next(struct saa7134_dev *dev, struct saa7134_dmaqueue *q); void saa7134_buffer_timeout(unsigned long data); -void saa7134_dma_free(struct saa7134_dev *dev,struct saa7134_buf *buf); +void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf); int saa7134_set_dmabits(struct saa7134_dev *dev); diff --git a/drivers/media/video/saa7146.h b/drivers/media/video/saa7146.h index 756963f01bbd..2830b5e33aec 100644 --- a/drivers/media/video/saa7146.h +++ b/drivers/media/video/saa7146.h @@ -1,7 +1,7 @@ -/* +/* saa7146.h - definitions philips saa7146 based cards Copyright (C) 1999 Nathan Laredo (laredo@gnu.org) - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or @@ -27,7 +27,7 @@ #include <linux/videodev.h> -#ifndef O_NONCAP +#ifndef O_NONCAP #define O_NONCAP O_TRUNC #endif @@ -36,7 +36,7 @@ #ifdef __KERNEL__ -struct saa7146_window +struct saa7146_window { int x, y; ushort width, height; @@ -70,7 +70,7 @@ struct saa7146 int irqstate; /* irq routine is state driven */ int writemode; int playmode; - unsigned int nr; + unsigned int nr; unsigned long irq; /* IRQ used by SAA7146 card */ unsigned short id; unsigned char revision; diff --git a/drivers/media/video/saa7146reg.h b/drivers/media/video/saa7146reg.h index 6cc910f50a4b..80ec2c146b4c 100644 --- a/drivers/media/video/saa7146reg.h +++ b/drivers/media/video/saa7146reg.h @@ -1,7 +1,7 @@ -/* +/* saa7146.h - definitions philips saa7146 based cards Copyright (C) 1999 Nathan Laredo (laredo@gnu.org) - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 3ed0edb870a4..9c308410856d 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -1,4 +1,4 @@ -/* +/* * saa7185 - Philips SAA7185B video encoder driver version 0.0.3 * * Copyright (C) 1998 Dave Perks <dperks@ibm.net> @@ -49,7 +49,6 @@ MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(s) (s)->name @@ -113,24 +112,21 @@ saa7185_write_block (struct i2c_client *client, if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { /* do raw I2C, not smbus compatible */ struct saa7185 *encoder = i2c_get_clientdata(client); - struct i2c_msg msg; u8 block_data[32]; + int block_len; - msg.addr = client->addr; - msg.flags = 0; while (len >= 2) { - msg.buf = (char *) block_data; - msg.len = 0; - block_data[msg.len++] = reg = data[0]; + block_len = 0; + block_data[block_len++] = reg = data[0]; do { - block_data[msg.len++] = + block_data[block_len++] = encoder->reg[reg++] = data[1]; len -= 2; data += 2; } while (len >= 2 && data[0] == reg && - msg.len < 32); - if ((ret = i2c_transfer(client->adapter, - &msg, 1)) < 0) + block_len < 32); + if ((ret = i2c_master_send(client, block_data, + block_len)) < 0) break; } } else { @@ -381,7 +377,7 @@ saa7185_command (struct i2c_client *client, static unsigned short normal_i2c[] = { I2C_SAA7185 >> 1, I2C_CLIENT_END }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, diff --git a/drivers/media/video/saa7196.h b/drivers/media/video/saa7196.h index f92f21cfbcac..cd4b6354a7b3 100644 --- a/drivers/media/video/saa7196.h +++ b/drivers/media/video/saa7196.h @@ -2,14 +2,14 @@ Definitions for the Philips SAA7196 digital video decoder, scaler, and clock generator circuit (DESCpro), as used in the PlanB video input of the Powermac 7x00/8x00 series. - + Copyright (C) 1998 Michel Lanners (mlan@cpu.lu) The register defines are shamelessly copied from the meteor driver out of NetBSD (with permission), and are copyrighted (c) 1995 Mark Tinguely and Jim Lowe (Thanks !) - + Additional debugging and coding by Takashi Oe (toe@unlinfo.unl.edu) The default values used for PlanB are my mistakes. diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c new file mode 100644 index 000000000000..a846ebc78cd7 --- /dev/null +++ b/drivers/media/video/se401.c @@ -0,0 +1,1435 @@ +/* + * Endpoints (formerly known as AOX) se401 USB Camera Driver + * + * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) + * + * Still somewhat based on the Linux ov511 driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * Thanks to Endpoints Inc. (www.endpoints.com) for making documentation on + * their chipset available and supporting me while writing this driver. + * - Jeroen Vreeken + */ + +static const char version[] = "0.24"; + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/pagemap.h> +#include <linux/usb.h> +#include "se401.h" + +static int flickerless=0; +static int video_nr = -1; + +static struct usb_device_id device_table [] = { + { USB_DEVICE(0x03e8, 0x0004) },/* Endpoints/Aox SE401 */ + { USB_DEVICE(0x0471, 0x030b) },/* Philips PCVC665K */ + { USB_DEVICE(0x047d, 0x5001) },/* Kensington 67014 */ + { USB_DEVICE(0x047d, 0x5002) },/* Kensington 6701(5/7) */ + { USB_DEVICE(0x047d, 0x5003) },/* Kensington 67016 */ + { } +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +MODULE_AUTHOR("Jeroen Vreeken <pe1rxq@amsat.org>"); +MODULE_DESCRIPTION("SE401 USB Camera Driver"); +MODULE_LICENSE("GPL"); +module_param(flickerless, int, 0); +MODULE_PARM_DESC(flickerless, "Net frequency to adjust exposure time to (0/50/60)"); +module_param(video_nr, int, 0); + +static struct usb_driver se401_driver; + + +/********************************************************************** + * + * Memory management + * + **********************************************************************/ +static void *rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + + + +/**************************************************************************** + * + * se401 register read/write functions + * + ***************************************************************************/ + +static int se401_sndctrl(int set, struct usb_se401 *se401, unsigned short req, + unsigned short value, unsigned char *cp, int size) +{ + return usb_control_msg ( + se401->dev, + set ? usb_sndctrlpipe(se401->dev, 0) : usb_rcvctrlpipe(se401->dev, 0), + req, + (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + 0, + cp, + size, + 1000 + ); +} + +static int se401_set_feature(struct usb_se401 *se401, unsigned short selector, + unsigned short param) +{ + /* specs say that the selector (address) should go in the value field + and the param in index, but in the logs of the windows driver they do + this the other way around... + */ + return usb_control_msg ( + se401->dev, + usb_sndctrlpipe(se401->dev, 0), + SE401_REQ_SET_EXT_FEATURE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + param, + selector, + NULL, + 0, + 1000 + ); +} + +static unsigned short se401_get_feature(struct usb_se401 *se401, + unsigned short selector) +{ + /* For 'set' the selecetor should be in index, not sure if the spec is + wrong here to.... + */ + unsigned char cp[2]; + usb_control_msg ( + se401->dev, + usb_rcvctrlpipe(se401->dev, 0), + SE401_REQ_GET_EXT_FEATURE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, + selector, + cp, + 2, + 1000 + ); + return cp[0]+cp[1]*256; +} + +/**************************************************************************** + * + * Camera control + * + ***************************************************************************/ + + +static int se401_send_pict(struct usb_se401 *se401) +{ + se401_set_feature(se401, HV7131_REG_TITL, se401->expose_l);/* integration time low */ + se401_set_feature(se401, HV7131_REG_TITM, se401->expose_m);/* integration time mid */ + se401_set_feature(se401, HV7131_REG_TITU, se401->expose_h);/* integration time mid */ + se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel);/* reset level value */ + se401_set_feature(se401, HV7131_REG_ARCG, se401->rgain);/* red color gain */ + se401_set_feature(se401, HV7131_REG_AGCG, se401->ggain);/* green color gain */ + se401_set_feature(se401, HV7131_REG_ABCG, se401->bgain);/* blue color gain */ + + return 0; +} + +static void se401_set_exposure(struct usb_se401 *se401, int brightness) +{ + int integration=brightness<<5; + + if (flickerless==50) { + integration=integration-integration%106667; + } + if (flickerless==60) { + integration=integration-integration%88889; + } + se401->brightness=integration>>5; + se401->expose_h=(integration>>16)&0xff; + se401->expose_m=(integration>>8)&0xff; + se401->expose_l=integration&0xff; +} + +static int se401_get_pict(struct usb_se401 *se401, struct video_picture *p) +{ + p->brightness=se401->brightness; + if (se401->enhance) { + p->whiteness=32768; + } else { + p->whiteness=0; + } + p->colour=65535; + p->contrast=65535; + p->hue=se401->rgain<<10; + p->palette=se401->palette; + p->depth=3; /* rgb24 */ + return 0; +} + + +static int se401_set_pict(struct usb_se401 *se401, struct video_picture *p) +{ + if (p->palette != VIDEO_PALETTE_RGB24) + return 1; + se401->palette=p->palette; + if (p->hue!=se401->hue) { + se401->rgain= p->hue>>10; + se401->bgain= 0x40-(p->hue>>10); + se401->hue=p->hue; + } + if (p->brightness!=se401->brightness) { + se401_set_exposure(se401, p->brightness); + } + if (p->whiteness>=32768) { + se401->enhance=1; + } else { + se401->enhance=0; + } + se401_send_pict(se401); + se401_send_pict(se401); + return 0; +} + +/* + Hyundai have some really nice docs about this and other sensor related + stuff on their homepage: www.hei.co.kr +*/ +static void se401_auto_resetlevel(struct usb_se401 *se401) +{ + unsigned int ahrc, alrc; + int oldreset=se401->resetlevel; + + /* For some reason this normally read-only register doesn't get reset + to zero after reading them just once... + */ + se401_get_feature(se401, HV7131_REG_HIREFNOH); + se401_get_feature(se401, HV7131_REG_HIREFNOL); + se401_get_feature(se401, HV7131_REG_LOREFNOH); + se401_get_feature(se401, HV7131_REG_LOREFNOL); + ahrc=256*se401_get_feature(se401, HV7131_REG_HIREFNOH) + + se401_get_feature(se401, HV7131_REG_HIREFNOL); + alrc=256*se401_get_feature(se401, HV7131_REG_LOREFNOH) + + se401_get_feature(se401, HV7131_REG_LOREFNOL); + + /* Not an exact science, but it seems to work pretty well... */ + if (alrc > 10) { + while (alrc>=10 && se401->resetlevel < 63) { + se401->resetlevel++; + alrc /=2; + } + } else if (ahrc > 20) { + while (ahrc>=20 && se401->resetlevel > 0) { + se401->resetlevel--; + ahrc /=2; + } + } + if (se401->resetlevel!=oldreset) + se401_set_feature(se401, HV7131_REG_ARLV, se401->resetlevel); + + return; +} + +/* irq handler for snapshot button */ +static void se401_button_irq(struct urb *urb, struct pt_regs *regs) +{ + struct usb_se401 *se401 = urb->context; + int status; + + if (!se401->dev) { + info("ohoh: device vapourished"); + return; + } + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + + if (urb->actual_length >=2) { + if (se401->button) + se401->buttonpressed=1; + } +exit: + status = usb_submit_urb (urb, GFP_ATOMIC); + if (status) + err ("%s - usb_submit_urb failed with result %d", + __FUNCTION__, status); +} + +static void se401_video_irq(struct urb *urb, struct pt_regs *regs) +{ + struct usb_se401 *se401 = urb->context; + int length = urb->actual_length; + + /* ohoh... */ + if (!se401->streaming) + return; + + if (!se401->dev) { + info ("ohoh: device vapourished"); + return; + } + + /* 0 sized packets happen if we are to fast, but sometimes the camera + keeps sending them forever... + */ + if (length && !urb->status) { + se401->nullpackets=0; + switch(se401->scratch[se401->scratch_next].state) { + case BUFFER_READY: + case BUFFER_BUSY: { + se401->dropped++; + break; + } + case BUFFER_UNUSED: { + memcpy(se401->scratch[se401->scratch_next].data, (unsigned char *)urb->transfer_buffer, length); + se401->scratch[se401->scratch_next].state=BUFFER_READY; + se401->scratch[se401->scratch_next].offset=se401->bayeroffset; + se401->scratch[se401->scratch_next].length=length; + if (waitqueue_active(&se401->wq)) { + wake_up_interruptible(&se401->wq); + } + se401->scratch_overflow=0; + se401->scratch_next++; + if (se401->scratch_next>=SE401_NUMSCRATCH) + se401->scratch_next=0; + break; + } + } + se401->bayeroffset+=length; + if (se401->bayeroffset>=se401->cheight*se401->cwidth) { + se401->bayeroffset=0; + } + } else { + se401->nullpackets++; + if (se401->nullpackets > SE401_MAX_NULLPACKETS) { + if (waitqueue_active(&se401->wq)) { + wake_up_interruptible(&se401->wq); + } + } + } + + /* Resubmit urb for new data */ + urb->status=0; + urb->dev=se401->dev; + if(usb_submit_urb(urb, GFP_KERNEL)) + info("urb burned down"); + return; +} + +static void se401_send_size(struct usb_se401 *se401, int width, int height) +{ + int i=0; + int mode=0x03; /* No compression */ + int sendheight=height; + int sendwidth=width; + + /* JangGu compression can only be used with the camera supported sizes, + but bayer seems to work with any size that fits on the sensor. + We check if we can use compression with the current size with either + 4 or 16 times subcapturing, if not we use uncompressed bayer data + but this will result in cutouts of the maximum size.... + */ + while (i<se401->sizes && !(se401->width[i]==width && se401->height[i]==height)) + i++; + while (i<se401->sizes) { + if (se401->width[i]==width*2 && se401->height[i]==height*2) { + sendheight=se401->height[i]; + sendwidth=se401->width[i]; + mode=0x40; + } + if (se401->width[i]==width*4 && se401->height[i]==height*4) { + sendheight=se401->height[i]; + sendwidth=se401->width[i]; + mode=0x42; + } + i++; + } + + se401_sndctrl(1, se401, SE401_REQ_SET_WIDTH, sendwidth, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_SET_HEIGHT, sendheight, NULL, 0); + se401_set_feature(se401, SE401_OPERATINGMODE, mode); + + if (mode==0x03) { + se401->format=FMT_BAYER; + } else { + se401->format=FMT_JANGGU; + } + + return; +} + +/* + In this function se401_send_pict is called several times, + for some reason (depending on the state of the sensor and the phase of + the moon :) doing this only in either place doesn't always work... +*/ +static int se401_start_stream(struct usb_se401 *se401) +{ + struct urb *urb; + int err=0, i; + se401->streaming=1; + + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); + + /* Set picture settings */ + se401_set_feature(se401, HV7131_REG_MODE_B, 0x05);/*windowed + pix intg */ + se401_send_pict(se401); + + se401_send_size(se401, se401->cwidth, se401->cheight); + + se401_sndctrl(1, se401, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, NULL, 0); + + /* Do some memory allocation */ + for (i=0; i<SE401_NUMFRAMES; i++) { + se401->frame[i].data=se401->fbuf + i * se401->maxframesize; + se401->frame[i].curpix=0; + } + for (i=0; i<SE401_NUMSBUF; i++) { + se401->sbuf[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + } + + se401->bayeroffset=0; + se401->scratch_next=0; + se401->scratch_use=0; + se401->scratch_overflow=0; + for (i=0; i<SE401_NUMSCRATCH; i++) { + se401->scratch[i].data=kmalloc(SE401_PACKETSIZE, GFP_KERNEL); + se401->scratch[i].state=BUFFER_UNUSED; + } + + for (i=0; i<SE401_NUMSBUF; i++) { + urb=usb_alloc_urb(0, GFP_KERNEL); + if(!urb) + return -ENOMEM; + + usb_fill_bulk_urb(urb, se401->dev, + usb_rcvbulkpipe(se401->dev, SE401_VIDEO_ENDPOINT), + se401->sbuf[i].data, SE401_PACKETSIZE, + se401_video_irq, + se401); + + se401->urb[i]=urb; + + err=usb_submit_urb(se401->urb[i], GFP_KERNEL); + if(err) + err("urb burned down"); + } + + se401->framecount=0; + + return 0; +} + +static int se401_stop_stream(struct usb_se401 *se401) +{ + int i; + + if (!se401->streaming || !se401->dev) + return 1; + + se401->streaming=0; + + se401_sndctrl(1, se401, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, NULL, 0); + + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0); + + for (i=0; i<SE401_NUMSBUF; i++) if (se401->urb[i]) { + usb_kill_urb(se401->urb[i]); + usb_free_urb(se401->urb[i]); + se401->urb[i]=NULL; + kfree(se401->sbuf[i].data); + } + for (i=0; i<SE401_NUMSCRATCH; i++) { + kfree(se401->scratch[i].data); + se401->scratch[i].data=NULL; + } + + return 0; +} + +static int se401_set_size(struct usb_se401 *se401, int width, int height) +{ + int wasstreaming=se401->streaming; + /* Check to see if we need to change */ + if (se401->cwidth==width && se401->cheight==height) + return 0; + + /* Check for a valid mode */ + if (!width || !height) + return 1; + if ((width & 1) || (height & 1)) + return 1; + if (width>se401->width[se401->sizes-1]) + return 1; + if (height>se401->height[se401->sizes-1]) + return 1; + + /* Stop a current stream and start it again at the new size */ + if (wasstreaming) + se401_stop_stream(se401); + se401->cwidth=width; + se401->cheight=height; + if (wasstreaming) + se401_start_stream(se401); + return 0; +} + + +/**************************************************************************** + * + * Video Decoding + * + ***************************************************************************/ + +/* + This shouldn't really be done in a v4l driver.... + But it does make the image look a lot more usable. + Basically it lifts the dark pixels more than the light pixels. +*/ +static inline void enhance_picture(unsigned char *frame, int len) +{ + while (len--) { + *frame=(((*frame^255)*(*frame^255))/255)^255; + frame++; + } +} + +static inline void decode_JangGu_integrate(struct usb_se401 *se401, int data) +{ + struct se401_frame *frame=&se401->frame[se401->curframe]; + int linelength=se401->cwidth*3; + + if (frame->curlinepix >= linelength) { + frame->curlinepix=0; + frame->curline+=linelength; + } + + /* First three are absolute, all others relative. + * Format is rgb from right to left (mirrorred image), + * we flip it to get bgr from left to right. */ + if (frame->curlinepix < 3) { + *(frame->curline-frame->curlinepix)=1+data*4; + } else { + *(frame->curline-frame->curlinepix)= + *(frame->curline-frame->curlinepix+3)+data*4; + } + frame->curlinepix++; +} + +static inline void decode_JangGu_vlc (struct usb_se401 *se401, unsigned char *data, int bit_exp, int packetlength) +{ + int pos=0; + int vlc_cod=0; + int vlc_size=0; + int vlc_data=0; + int bit_cur; + int bit; + data+=4; + while (pos < packetlength) { + bit_cur=8; + while (bit_cur && bit_exp) { + bit=((*data)>>(bit_cur-1))&1; + if (!vlc_cod) { + if (bit) { + vlc_size++; + } else { + if (!vlc_size) { + decode_JangGu_integrate(se401, 0); + } else { + vlc_cod=2; + vlc_data=0; + } + } + } else { + if (vlc_cod==2) { + if (!bit) + vlc_data = -(1<<vlc_size) + 1; + vlc_cod--; + } + vlc_size--; + vlc_data+=bit<<vlc_size; + if (!vlc_size) { + decode_JangGu_integrate(se401, vlc_data); + vlc_cod=0; + } + } + bit_cur--; + bit_exp--; + } + pos++; + data++; + } +} + +static inline void decode_JangGu (struct usb_se401 *se401, struct se401_scratch *buffer) +{ + unsigned char *data=buffer->data; + int len=buffer->length; + int bit_exp=0, pix_exp=0, frameinfo=0, packetlength=0, size; + int datapos=0; + + /* New image? */ + if (!se401->frame[se401->curframe].curpix) { + se401->frame[se401->curframe].curlinepix=0; + se401->frame[se401->curframe].curline= + se401->frame[se401->curframe].data+ + se401->cwidth*3-1; + if (se401->frame[se401->curframe].grabstate==FRAME_READY) + se401->frame[se401->curframe].grabstate=FRAME_GRABBING; + se401->vlcdatapos=0; + } + while (datapos < len) { + size=1024-se401->vlcdatapos; + if (size+datapos > len) + size=len-datapos; + memcpy(se401->vlcdata+se401->vlcdatapos, data+datapos, size); + se401->vlcdatapos+=size; + packetlength=0; + if (se401->vlcdatapos >= 4) { + bit_exp=se401->vlcdata[3]+(se401->vlcdata[2]<<8); + pix_exp=se401->vlcdata[1]+((se401->vlcdata[0]&0x3f)<<8); + frameinfo=se401->vlcdata[0]&0xc0; + packetlength=((bit_exp+47)>>4)<<1; + if (packetlength > 1024) { + se401->vlcdatapos=0; + datapos=len; + packetlength=0; + se401->error++; + se401->frame[se401->curframe].curpix=0; + } + } + if (packetlength && se401->vlcdatapos >= packetlength) { + decode_JangGu_vlc(se401, se401->vlcdata, bit_exp, packetlength); + se401->frame[se401->curframe].curpix+=pix_exp*3; + datapos+=size-(se401->vlcdatapos-packetlength); + se401->vlcdatapos=0; + if (se401->frame[se401->curframe].curpix>=se401->cwidth*se401->cheight*3) { + if (se401->frame[se401->curframe].curpix==se401->cwidth*se401->cheight*3) { + if (se401->frame[se401->curframe].grabstate==FRAME_GRABBING) { + se401->frame[se401->curframe].grabstate=FRAME_DONE; + se401->framecount++; + se401->readcount++; + } + if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { + se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); + } + } else { + se401->error++; + } + se401->frame[se401->curframe].curpix=0; + datapos=len; + } + } else { + datapos+=size; + } + } +} + +static inline void decode_bayer (struct usb_se401 *se401, struct se401_scratch *buffer) +{ + unsigned char *data=buffer->data; + int len=buffer->length; + int offset=buffer->offset; + int datasize=se401->cwidth*se401->cheight; + struct se401_frame *frame=&se401->frame[se401->curframe]; + + unsigned char *framedata=frame->data, *curline, *nextline; + int width=se401->cwidth; + int blineoffset=0, bline; + int linelength=width*3, i; + + + if (frame->curpix==0) { + if (frame->grabstate==FRAME_READY) { + frame->grabstate=FRAME_GRABBING; + } + frame->curline=framedata+linelength; + frame->curlinepix=0; + } + + if (offset!=frame->curpix) { + /* Regard frame as lost :( */ + frame->curpix=0; + se401->error++; + return; + } + + /* Check if we have to much data */ + if (frame->curpix+len > datasize) { + len=datasize-frame->curpix; + } + if (se401->cheight%4) + blineoffset=1; + bline=frame->curpix/se401->cwidth+blineoffset; + + curline=frame->curline; + nextline=curline+linelength; + if (nextline >= framedata+datasize*3) + nextline=curline; + while (len) { + if (frame->curlinepix>=width) { + frame->curlinepix-=width; + bline=frame->curpix/width+blineoffset; + curline+=linelength*2; + nextline+=linelength*2; + if (curline >= framedata+datasize*3) { + frame->curlinepix++; + curline-=3; + nextline-=3; + len--; + data++; + frame->curpix++; + } + if (nextline >= framedata+datasize*3) + nextline=curline; + } + if ((bline&1)) { + if ((frame->curlinepix&1)) { + *(curline+2)=*data; + *(curline-1)=*data; + *(nextline+2)=*data; + *(nextline-1)=*data; + } else { + *(curline+1)= + (*(curline+1)+*data)/2; + *(curline-2)= + (*(curline-2)+*data)/2; + *(nextline+1)=*data; + *(nextline-2)=*data; + } + } else { + if ((frame->curlinepix&1)) { + *(curline+1)= + (*(curline+1)+*data)/2; + *(curline-2)= + (*(curline-2)+*data)/2; + *(nextline+1)=*data; + *(nextline-2)=*data; + } else { + *curline=*data; + *(curline-3)=*data; + *nextline=*data; + *(nextline-3)=*data; + } + } + frame->curlinepix++; + curline-=3; + nextline-=3; + len--; + data++; + frame->curpix++; + } + frame->curline=curline; + + if (frame->curpix>=datasize) { + /* Fix the top line */ + framedata+=linelength; + for (i=0; i<linelength; i++) { + framedata--; + *framedata=*(framedata+linelength); + } + /* Fix the left side (green is already present) */ + for (i=0; i<se401->cheight; i++) { + *framedata=*(framedata+3); + *(framedata+1)=*(framedata+4); + *(framedata+2)=*(framedata+5); + framedata+=linelength; + } + frame->curpix=0; + frame->grabstate=FRAME_DONE; + se401->framecount++; + se401->readcount++; + if (se401->frame[(se401->curframe+1)&(SE401_NUMFRAMES-1)].grabstate==FRAME_READY) { + se401->curframe=(se401->curframe+1) & (SE401_NUMFRAMES-1); + } + } +} + +static int se401_newframe(struct usb_se401 *se401, int framenr) +{ + DECLARE_WAITQUEUE(wait, current); + int errors=0; + + while (se401->streaming && + (se401->frame[framenr].grabstate==FRAME_READY || + se401->frame[framenr].grabstate==FRAME_GRABBING) ) { + if(!se401->frame[framenr].curpix) { + errors++; + } + wait_interruptible( + se401->scratch[se401->scratch_use].state!=BUFFER_READY, + &se401->wq, + &wait + ); + if (se401->nullpackets > SE401_MAX_NULLPACKETS) { + se401->nullpackets=0; + info("to many null length packets, restarting capture"); + se401_stop_stream(se401); + se401_start_stream(se401); + } else { + if (se401->scratch[se401->scratch_use].state!=BUFFER_READY) { + se401->frame[framenr].grabstate=FRAME_ERROR; + return -EIO; + } + se401->scratch[se401->scratch_use].state=BUFFER_BUSY; + if (se401->format==FMT_JANGGU) { + decode_JangGu(se401, &se401->scratch[se401->scratch_use]); + } else { + decode_bayer(se401, &se401->scratch[se401->scratch_use]); + } + se401->scratch[se401->scratch_use].state=BUFFER_UNUSED; + se401->scratch_use++; + if (se401->scratch_use>=SE401_NUMSCRATCH) + se401->scratch_use=0; + if (errors > SE401_MAX_ERRORS) { + errors=0; + info("to much errors, restarting capture"); + se401_stop_stream(se401); + se401_start_stream(se401); + } + } + } + + if (se401->frame[framenr].grabstate==FRAME_DONE) + if (se401->enhance) + enhance_picture(se401->frame[framenr].data, se401->cheight*se401->cwidth*3); + return 0; +} + +static void usb_se401_remove_disconnected (struct usb_se401 *se401) +{ + int i; + + se401->dev = NULL; + + for (i=0; i<SE401_NUMSBUF; i++) + if (se401->urb[i]) { + usb_kill_urb(se401->urb[i]); + usb_free_urb(se401->urb[i]); + se401->urb[i] = NULL; + kfree(se401->sbuf[i].data); + } + for (i=0; i<SE401_NUMSCRATCH; i++) { + kfree(se401->scratch[i].data); + } + if (se401->inturb) { + usb_kill_urb(se401->inturb); + usb_free_urb(se401->inturb); + } + info("%s disconnected", se401->camera_name); + + /* Free the memory */ + kfree(se401->width); + kfree(se401->height); + kfree(se401); +} + + + +/**************************************************************************** + * + * Video4Linux + * + ***************************************************************************/ + + +static int se401_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_se401 *se401 = (struct usb_se401 *)dev; + int err = 0; + + if (se401->user) + return -EBUSY; + se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES); + if (se401->fbuf) + file->private_data = dev; + else + err = -ENOMEM; + se401->user = !err; + + return err; +} + +static int se401_close(struct inode *inode, struct file *file) +{ + struct video_device *dev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)dev; + int i; + + rvfree(se401->fbuf, se401->maxframesize * SE401_NUMFRAMES); + if (se401->removed) { + usb_se401_remove_disconnected(se401); + info("device unregistered"); + } else { + for (i=0; i<SE401_NUMFRAMES; i++) + se401->frame[i].grabstate=FRAME_UNUSED; + if (se401->streaming) + se401_stop_stream(se401); + se401->user=0; + } + file->private_data = NULL; + return 0; +} + +static int se401_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)vdev; + + if (!se401->dev) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP: + { + struct video_capability *b = arg; + strcpy(b->name, se401->camera_name); + b->type = VID_TYPE_CAPTURE; + b->channels = 1; + b->audios = 0; + b->maxwidth = se401->width[se401->sizes-1]; + b->maxheight = se401->height[se401->sizes-1]; + b->minwidth = se401->width[0]; + b->minheight = se401->height[0]; + return 0; + } + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + v->flags = 0; + v->tuners = 0; + v->type = VIDEO_TYPE_CAMERA; + strcpy(v->name, "Camera"); + return 0; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + return 0; + } + case VIDIOCGPICT: + { + struct video_picture *p = arg; + + se401_get_pict(se401, p); + return 0; + } + case VIDIOCSPICT: + { + struct video_picture *p = arg; + + if (se401_set_pict(se401, p)) + return -EINVAL; + return 0; + } + case VIDIOCSWIN: + { + struct video_window *vw = arg; + + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (se401_set_size(se401, vw->width, vw->height)) + return -EINVAL; + return 0; + } + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + vw->x = 0; /* FIXME */ + vw->y = 0; + vw->chromakey = 0; + vw->flags = 0; + vw->clipcount = 0; + vw->width = se401->cwidth; + vw->height = se401->cheight; + return 0; + } + case VIDIOCGMBUF: + { + struct video_mbuf *vm = arg; + int i; + + memset(vm, 0, sizeof(*vm)); + vm->size = SE401_NUMFRAMES * se401->maxframesize; + vm->frames = SE401_NUMFRAMES; + for (i=0; i<SE401_NUMFRAMES; i++) + vm->offsets[i] = se401->maxframesize * i; + return 0; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *vm = arg; + + if (vm->format != VIDEO_PALETTE_RGB24) + return -EINVAL; + if (vm->frame >= SE401_NUMFRAMES) + return -EINVAL; + if (se401->frame[vm->frame].grabstate != FRAME_UNUSED) + return -EBUSY; + + /* Is this according to the v4l spec??? */ + if (se401_set_size(se401, vm->width, vm->height)) + return -EINVAL; + se401->frame[vm->frame].grabstate=FRAME_READY; + + if (!se401->streaming) + se401_start_stream(se401); + + /* Set the picture properties */ + if (se401->framecount==0) + se401_send_pict(se401); + /* Calibrate the reset level after a few frames. */ + if (se401->framecount%20==1) + se401_auto_resetlevel(se401); + + return 0; + } + case VIDIOCSYNC: + { + int *frame = arg; + int ret=0; + + if(*frame <0 || *frame >= SE401_NUMFRAMES) + return -EINVAL; + + ret=se401_newframe(se401, *frame); + se401->frame[*frame].grabstate=FRAME_UNUSED; + return ret; + } + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + memset(vb, 0, sizeof(*vb)); + return 0; + } + case VIDIOCKEY: + return 0; + case VIDIOCCAPTURE: + return -EINVAL; + case VIDIOCSFBUF: + return -EINVAL; + case VIDIOCGTUNER: + case VIDIOCSTUNER: + return -EINVAL; + case VIDIOCGFREQ: + case VIDIOCSFREQ: + return -EINVAL; + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + return -EINVAL; + default: + return -ENOIOCTLCMD; + } /* end switch */ + + return 0; +} + +static int se401_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, se401_do_ioctl); +} + +static ssize_t se401_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + int realcount=count, ret=0; + struct video_device *dev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)dev; + + + if (se401->dev == NULL) + return -EIO; + if (realcount > se401->cwidth*se401->cheight*3) + realcount=se401->cwidth*se401->cheight*3; + + /* Shouldn't happen: */ + if (se401->frame[0].grabstate==FRAME_GRABBING) + return -EBUSY; + se401->frame[0].grabstate=FRAME_READY; + se401->frame[1].grabstate=FRAME_UNUSED; + se401->curframe=0; + + if (!se401->streaming) + se401_start_stream(se401); + + /* Set the picture properties */ + if (se401->framecount==0) + se401_send_pict(se401); + /* Calibrate the reset level after a few frames. */ + if (se401->framecount%20==1) + se401_auto_resetlevel(se401); + + ret=se401_newframe(se401, 0); + + se401->frame[0].grabstate=FRAME_UNUSED; + if (ret) + return ret; + if (copy_to_user(buf, se401->frame[0].data, realcount)) + return -EFAULT; + + return realcount; +} + +static int se401_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *dev = file->private_data; + struct usb_se401 *se401 = (struct usb_se401 *)dev; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + mutex_lock(&se401->lock); + + if (se401->dev == NULL) { + mutex_unlock(&se401->lock); + return -EIO; + } + if (size > (((SE401_NUMFRAMES * se401->maxframesize) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) { + mutex_unlock(&se401->lock); + return -EINVAL; + } + pos = (unsigned long)se401->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&se401->lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + mutex_unlock(&se401->lock); + + return 0; +} + +static struct file_operations se401_fops = { + .owner = THIS_MODULE, + .open = se401_open, + .release = se401_close, + .read = se401_read, + .mmap = se401_mmap, + .ioctl = se401_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static struct video_device se401_template = { + .owner = THIS_MODULE, + .name = "se401 USB camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_SE401, + .fops = &se401_fops, +}; + + + +/***************************/ +static int se401_init(struct usb_se401 *se401, int button) +{ + int i=0, rc; + unsigned char cp[0x40]; + char temp[200]; + + /* led on */ + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); + + /* get camera descriptor */ + rc=se401_sndctrl(0, se401, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0, cp, sizeof(cp)); + if (cp[1]!=0x41) { + err("Wrong descriptor type"); + return 1; + } + sprintf (temp, "ExtraFeatures: %d", cp[3]); + + se401->sizes=cp[4]+cp[5]*256; + se401->width=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + if (!se401->width) + return 1; + se401->height=kmalloc(se401->sizes*sizeof(int), GFP_KERNEL); + if (!se401->height) { + kfree(se401->width); + return 1; + } + for (i=0; i<se401->sizes; i++) { + se401->width[i]=cp[6+i*4+0]+cp[6+i*4+1]*256; + se401->height[i]=cp[6+i*4+2]+cp[6+i*4+3]*256; + } + sprintf (temp, "%s Sizes:", temp); + for (i=0; i<se401->sizes; i++) { + sprintf(temp, "%s %dx%d", temp, se401->width[i], se401->height[i]); + } + info("%s", temp); + se401->maxframesize=se401->width[se401->sizes-1]*se401->height[se401->sizes-1]*3; + + rc=se401_sndctrl(0, se401, SE401_REQ_GET_WIDTH, 0, cp, sizeof(cp)); + se401->cwidth=cp[0]+cp[1]*256; + rc=se401_sndctrl(0, se401, SE401_REQ_GET_HEIGHT, 0, cp, sizeof(cp)); + se401->cheight=cp[0]+cp[1]*256; + + if (!cp[2] && SE401_FORMAT_BAYER) { + err("Bayer format not supported!"); + return 1; + } + /* set output mode (BAYER) */ + se401_sndctrl(1, se401, SE401_REQ_SET_OUTPUT_MODE, SE401_FORMAT_BAYER, NULL, 0); + + rc=se401_sndctrl(0, se401, SE401_REQ_GET_BRT, 0, cp, sizeof(cp)); + se401->brightness=cp[0]+cp[1]*256; + /* some default values */ + se401->resetlevel=0x2d; + se401->rgain=0x20; + se401->ggain=0x20; + se401->bgain=0x20; + se401_set_exposure(se401, 20000); + se401->palette=VIDEO_PALETTE_RGB24; + se401->enhance=1; + se401->dropped=0; + se401->error=0; + se401->framecount=0; + se401->readcount=0; + + /* Start interrupt transfers for snapshot button */ + if (button) { + se401->inturb=usb_alloc_urb(0, GFP_KERNEL); + if (!se401->inturb) { + info("Allocation of inturb failed"); + return 1; + } + usb_fill_int_urb(se401->inturb, se401->dev, + usb_rcvintpipe(se401->dev, SE401_BUTTON_ENDPOINT), + &se401->button, sizeof(se401->button), + se401_button_irq, + se401, + 8 + ); + if (usb_submit_urb(se401->inturb, GFP_KERNEL)) { + info("int urb burned down"); + return 1; + } + } else + se401->inturb=NULL; + + /* Flash the led */ + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 1, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 1, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_CAMERA_POWER, 0, NULL, 0); + se401_sndctrl(1, se401, SE401_REQ_LED_CONTROL, 0, NULL, 0); + + return 0; +} + +static int se401_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_interface_descriptor *interface; + struct usb_se401 *se401; + char *camera_name=NULL; + int button=1; + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + interface = &intf->cur_altsetting->desc; + + /* Is it an se401? */ + if (le16_to_cpu(dev->descriptor.idVendor) == 0x03e8 && + le16_to_cpu(dev->descriptor.idProduct) == 0x0004) { + camera_name="Endpoints/Aox SE401"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x0471 && + le16_to_cpu(dev->descriptor.idProduct) == 0x030b) { + camera_name="Philips PCVC665K"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5001) { + camera_name="Kensington VideoCAM 67014"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5002) { + camera_name="Kensington VideoCAM 6701(5/7)"; + } else if (le16_to_cpu(dev->descriptor.idVendor) == 0x047d && + le16_to_cpu(dev->descriptor.idProduct) == 0x5003) { + camera_name="Kensington VideoCAM 67016"; + button=0; + } else + return -ENODEV; + + /* Checking vendor/product should be enough, but what the hell */ + if (interface->bInterfaceClass != 0x00) + return -ENODEV; + if (interface->bInterfaceSubClass != 0x00) + return -ENODEV; + + /* We found one */ + info("SE401 camera found: %s", camera_name); + + if ((se401 = kzalloc(sizeof(*se401), GFP_KERNEL)) == NULL) { + err("couldn't kmalloc se401 struct"); + return -ENOMEM; + } + + se401->dev = dev; + se401->iface = interface->bInterfaceNumber; + se401->camera_name = camera_name; + + info("firmware version: %02x", le16_to_cpu(dev->descriptor.bcdDevice) & 255); + + if (se401_init(se401, button)) { + kfree(se401); + return -EIO; + } + + memcpy(&se401->vdev, &se401_template, sizeof(se401_template)); + memcpy(se401->vdev.name, se401->camera_name, strlen(se401->camera_name)); + init_waitqueue_head(&se401->wq); + mutex_init(&se401->lock); + wmb(); + + if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + kfree(se401); + err("video_register_device failed"); + return -EIO; + } + info("registered new video device: video%d", se401->vdev.minor); + + usb_set_intfdata (intf, se401); + return 0; +} + +static void se401_disconnect(struct usb_interface *intf) +{ + struct usb_se401 *se401 = usb_get_intfdata (intf); + + usb_set_intfdata (intf, NULL); + if (se401) { + video_unregister_device(&se401->vdev); + if (!se401->user){ + usb_se401_remove_disconnected(se401); + } else { + se401->frame[0].grabstate = FRAME_ERROR; + se401->frame[0].grabstate = FRAME_ERROR; + + se401->streaming = 0; + + wake_up_interruptible(&se401->wq); + se401->removed = 1; + } + } +} + +static struct usb_driver se401_driver = { + .name = "se401", + .id_table = device_table, + .probe = se401_probe, + .disconnect = se401_disconnect, +}; + + + +/**************************************************************************** + * + * Module routines + * + ***************************************************************************/ + +static int __init usb_se401_init(void) +{ + info("SE401 usb camera driver version %s registering", version); + if (flickerless) + if (flickerless!=50 && flickerless!=60) { + info("Invallid flickerless value, use 0, 50 or 60."); + return -1; + } + return usb_register(&se401_driver); +} + +static void __exit usb_se401_exit(void) +{ + usb_deregister(&se401_driver); + info("SE401 driver deregistered"); +} + +module_init(usb_se401_init); +module_exit(usb_se401_exit); diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h new file mode 100644 index 000000000000..a7a216bd4413 --- /dev/null +++ b/drivers/media/video/se401.h @@ -0,0 +1,234 @@ + +#ifndef __LINUX_se401_H +#define __LINUX_se401_H + +#include <asm/uaccess.h> +#include <linux/videodev.h> +#include <linux/smp_lock.h> +#include <linux/mutex.h> + +#define se401_DEBUG /* Turn on debug messages */ + +#ifdef se401_DEBUG +# define PDEBUG(level, fmt, args...) \ +if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args) +#else +# define PDEBUG(level, fmt, args...) do {} while(0) +#endif + +/* An almost drop-in replacement for sleep_on_interruptible */ +#define wait_interruptible(test, queue, wait) \ +{ \ + add_wait_queue(queue, wait); \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (test) \ + schedule(); \ + remove_wait_queue(queue, wait); \ + set_current_state(TASK_RUNNING); \ + if (signal_pending(current)) \ + break; \ +} + +#define SE401_REQ_GET_CAMERA_DESCRIPTOR 0x06 +#define SE401_REQ_START_CONTINUOUS_CAPTURE 0x41 +#define SE401_REQ_STOP_CONTINUOUS_CAPTURE 0x42 +#define SE401_REQ_CAPTURE_FRAME 0x43 +#define SE401_REQ_GET_BRT 0x44 +#define SE401_REQ_SET_BRT 0x45 +#define SE401_REQ_GET_WIDTH 0x4c +#define SE401_REQ_SET_WIDTH 0x4d +#define SE401_REQ_GET_HEIGHT 0x4e +#define SE401_REQ_SET_HEIGHT 0x4f +#define SE401_REQ_GET_OUTPUT_MODE 0x50 +#define SE401_REQ_SET_OUTPUT_MODE 0x51 +#define SE401_REQ_GET_EXT_FEATURE 0x52 +#define SE401_REQ_SET_EXT_FEATURE 0x53 +#define SE401_REQ_CAMERA_POWER 0x56 +#define SE401_REQ_LED_CONTROL 0x57 +#define SE401_REQ_BIOS 0xff + +#define SE401_BIOS_READ 0x07 + +#define SE401_FORMAT_BAYER 0x40 + +/* Hyundai hv7131b registers + 7121 and 7141 should be the same (haven't really checked...) */ +/* Mode registers: */ +#define HV7131_REG_MODE_A 0x00 +#define HV7131_REG_MODE_B 0x01 +#define HV7131_REG_MODE_C 0x02 +/* Frame registers: */ +#define HV7131_REG_FRSU 0x10 +#define HV7131_REG_FRSL 0x11 +#define HV7131_REG_FCSU 0x12 +#define HV7131_REG_FCSL 0x13 +#define HV7131_REG_FWHU 0x14 +#define HV7131_REG_FWHL 0x15 +#define HV7131_REG_FWWU 0x16 +#define HV7131_REG_FWWL 0x17 +/* Timing registers: */ +#define HV7131_REG_THBU 0x20 +#define HV7131_REG_THBL 0x21 +#define HV7131_REG_TVBU 0x22 +#define HV7131_REG_TVBL 0x23 +#define HV7131_REG_TITU 0x25 +#define HV7131_REG_TITM 0x26 +#define HV7131_REG_TITL 0x27 +#define HV7131_REG_TMCD 0x28 +/* Adjust Registers: */ +#define HV7131_REG_ARLV 0x30 +#define HV7131_REG_ARCG 0x31 +#define HV7131_REG_AGCG 0x32 +#define HV7131_REG_ABCG 0x33 +#define HV7131_REG_APBV 0x34 +#define HV7131_REG_ASLP 0x54 +/* Offset Registers: */ +#define HV7131_REG_OFSR 0x50 +#define HV7131_REG_OFSG 0x51 +#define HV7131_REG_OFSB 0x52 +/* REset level statistics registers: */ +#define HV7131_REG_LOREFNOH 0x57 +#define HV7131_REG_LOREFNOL 0x58 +#define HV7131_REG_HIREFNOH 0x59 +#define HV7131_REG_HIREFNOL 0x5a + +/* se401 registers */ +#define SE401_OPERATINGMODE 0x2000 + + +/* size of usb transfers */ +#define SE401_PACKETSIZE 4096 +/* number of queued bulk transfers to use, should be about 8 */ +#define SE401_NUMSBUF 1 +/* read the usb specs for this one :) */ +#define SE401_VIDEO_ENDPOINT 1 +#define SE401_BUTTON_ENDPOINT 2 +/* number of frames supported by the v4l part */ +#define SE401_NUMFRAMES 2 +/* scratch buffers for passing data to the decoders */ +#define SE401_NUMSCRATCH 32 +/* maximum amount of data in a JangGu packet */ +#define SE401_VLCDATALEN 1024 +/* number of nul sized packets to receive before kicking the camera */ +#define SE401_MAX_NULLPACKETS 4000 +/* number of decoding errors before kicking the camera */ +#define SE401_MAX_ERRORS 200 + +struct usb_device; + +struct se401_sbuf { + unsigned char *data; +}; + +enum { + FRAME_UNUSED, /* Unused (no MCAPTURE) */ + FRAME_READY, /* Ready to start grabbing */ + FRAME_GRABBING, /* In the process of being grabbed into */ + FRAME_DONE, /* Finished grabbing, but not been synced yet */ + FRAME_ERROR, /* Something bad happened while processing */ +}; + +enum { + FMT_BAYER, + FMT_JANGGU, +}; + +enum { + BUFFER_UNUSED, + BUFFER_READY, + BUFFER_BUSY, + BUFFER_DONE, +}; + +struct se401_scratch { + unsigned char *data; + volatile int state; + int offset; + int length; +}; + +struct se401_frame { + unsigned char *data; /* Frame buffer */ + + volatile int grabstate; /* State of grabbing */ + + unsigned char *curline; + int curlinepix; + int curpix; +}; + +struct usb_se401 { + struct video_device vdev; + + /* Device structure */ + struct usb_device *dev; + + unsigned char iface; + + char *camera_name; + + int change; + int brightness; + int hue; + int rgain; + int ggain; + int bgain; + int expose_h; + int expose_m; + int expose_l; + int resetlevel; + + int enhance; + + int format; + int sizes; + int *width; + int *height; + int cwidth; /* current width */ + int cheight; /* current height */ + int palette; + int maxframesize; + int cframesize; /* current framesize */ + + struct mutex lock; + int user; /* user count for exclusive use */ + int removed; /* device disconnected */ + + int streaming; /* Are we streaming video? */ + + char *fbuf; /* Videodev buffer area */ + + struct urb *urb[SE401_NUMSBUF]; + struct urb *inturb; + + int button; + int buttonpressed; + + int curframe; /* Current receiving frame */ + struct se401_frame frame[SE401_NUMFRAMES]; + int readcount; + int framecount; + int error; + int dropped; + + int scratch_next; + int scratch_use; + int scratch_overflow; + struct se401_scratch scratch[SE401_NUMSCRATCH]; + + /* Decoder specific data: */ + unsigned char vlcdata[SE401_VLCDATALEN]; + int vlcdatapos; + int bayeroffset; + + struct se401_sbuf sbuf[SE401_NUMSBUF]; + + wait_queue_head_t wq; /* Processes waiting */ + + int nullpackets; +}; + + + +#endif + diff --git a/drivers/media/video/sn9c102/Makefile b/drivers/media/video/sn9c102/Makefile new file mode 100644 index 000000000000..536ad3098da4 --- /dev/null +++ b/drivers/media/video/sn9c102/Makefile @@ -0,0 +1,7 @@ +sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \ + sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bca.o \ + sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \ + sn9c102_tas5130d1b.o + +obj-$(CONFIG_USB_SN9C102) += sn9c102.o + diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h new file mode 100644 index 000000000000..2c6ff396dafc --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102.h @@ -0,0 +1,218 @@ +/*************************************************************************** + * V4L2 driver for SN9C10x PC Camera Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _SN9C102_H_ +#define _SN9C102_H_ + +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/wait.h> +#include <linux/types.h> +#include <linux/param.h> +#include <linux/rwsem.h> +#include <linux/mutex.h> +#include <linux/string.h> +#include <linux/stddef.h> + +#include "sn9c102_sensor.h" + +/*****************************************************************************/ + +#define SN9C102_DEBUG +#define SN9C102_DEBUG_LEVEL 2 +#define SN9C102_MAX_DEVICES 64 +#define SN9C102_PRESERVE_IMGSCALE 0 +#define SN9C102_FORCE_MUNMAP 0 +#define SN9C102_MAX_FRAMES 32 +#define SN9C102_URBS 2 +#define SN9C102_ISO_PACKETS 7 +#define SN9C102_ALTERNATE_SETTING 8 +#define SN9C102_URB_TIMEOUT msecs_to_jiffies(2 * SN9C102_ISO_PACKETS) +#define SN9C102_CTRL_TIMEOUT 300 +#define SN9C102_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +enum sn9c102_bridge { + BRIDGE_SN9C101 = 0x01, + BRIDGE_SN9C102 = 0x02, + BRIDGE_SN9C103 = 0x04, +}; + +SN9C102_ID_TABLE +SN9C102_SENSOR_TABLE + +enum sn9c102_frame_state { + F_UNUSED, + F_QUEUED, + F_GRABBING, + F_DONE, + F_ERROR, +}; + +struct sn9c102_frame_t { + void* bufmem; + struct v4l2_buffer buf; + enum sn9c102_frame_state state; + struct list_head frame; + unsigned long vma_use_count; +}; + +enum sn9c102_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +enum sn9c102_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +enum sn9c102_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON, +}; + +typedef char sn9c103_sof_header_t[18]; +typedef char sn9c102_sof_header_t[12]; +typedef char sn9c102_eof_header_t[4]; + +struct sn9c102_sysfs_attr { + u8 reg, i2c_reg; + sn9c103_sof_header_t frame_header; +}; + +struct sn9c102_module_param { + u8 force_munmap; + u16 frame_timeout; +}; + +static DEFINE_MUTEX(sn9c102_sysfs_lock); +static DECLARE_RWSEM(sn9c102_disconnect); + +struct sn9c102_device { + struct video_device* v4ldev; + + enum sn9c102_bridge bridge; + struct sn9c102_sensor sensor; + + struct usb_device* usbdev; + struct urb* urb[SN9C102_URBS]; + void* transfer_buffer[SN9C102_URBS]; + u8* control_buffer; + + struct sn9c102_frame_t *frame_current, frame[SN9C102_MAX_FRAMES]; + struct list_head inqueue, outqueue; + u32 frame_count, nbuffers, nreadbuffers; + + enum sn9c102_io_method io; + enum sn9c102_stream_state stream; + + struct v4l2_jpegcompression compression; + + struct sn9c102_sysfs_attr sysfs; + sn9c103_sof_header_t sof_header; + u16 reg[63]; + + struct sn9c102_module_param module_param; + + enum sn9c102_dev_state state; + u8 users; + + struct mutex dev_mutex, fileop_mutex; + spinlock_t queue_lock; + wait_queue_head_t open, wait_frame, wait_stream; +}; + +/*****************************************************************************/ + +struct sn9c102_device* +sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id) +{ + if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id)) + return cam; + + return NULL; +} + + +void +sn9c102_attach_sensor(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor) +{ + memcpy(&cam->sensor, sensor, sizeof(struct sn9c102_sensor)); +} + +/*****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef SN9C102_DEBUG +# define DBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1) \ + dev_err(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) == 2) \ + dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) >= 3) \ + dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} while (0) +# define V4LDBG(level, name, cmd) \ +do { \ + if (debug >= (level)) \ + v4l_print_ioctl(name, cmd); \ +} while (0) +# define KDBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1 || (level) == 2) \ + pr_info("sn9c102: " fmt "\n", ## args); \ + else if ((level) == 3) \ + pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} while (0) +#else +# define DBG(level, fmt, args...) do {;} while(0) +# define V4LDBG(level, name, cmd) do {;} while(0) +# define KDBG(level, fmt, args...) do {;} while(0) +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args) + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */ + +#endif /* _SN9C102_H_ */ diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c new file mode 100644 index 000000000000..ea4394dc9415 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -0,0 +1,2919 @@ +/*************************************************************************** + * V4L2 driver for SN9C10x PC Camera Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/poll.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/page-flags.h> +#include <linux/byteorder/generic.h> +#include <asm/page.h> +#include <asm/uaccess.h> + +#include "sn9c102.h" + +/*****************************************************************************/ + +#define SN9C102_MODULE_NAME "V4L2 driver for SN9C10x PC Camera Controllers" +#define SN9C102_MODULE_AUTHOR "(C) 2004-2006 Luca Risolia" +#define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define SN9C102_MODULE_LICENSE "GPL" +#define SN9C102_MODULE_VERSION "1:1.27" +#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 27) + +/*****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, sn9c102_id_table); + +MODULE_AUTHOR(SN9C102_MODULE_AUTHOR " " SN9C102_AUTHOR_EMAIL); +MODULE_DESCRIPTION(SN9C102_MODULE_NAME); +MODULE_VERSION(SN9C102_MODULE_VERSION); +MODULE_LICENSE(SN9C102_MODULE_LICENSE); + +static short video_nr[] = {[0 ... SN9C102_MAX_DEVICES-1] = -1}; +module_param_array(video_nr, short, NULL, 0444); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L2 minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to "__MODULE_STRING(SN9C102_MAX_DEVICES) + " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second camera and use auto for the first" + "\none and for every other camera." + "\n"); + +static short force_munmap[] = {[0 ... SN9C102_MAX_DEVICES-1] = + SN9C102_FORCE_MUNMAP}; +module_param_array(force_munmap, bool, NULL, 0444); +MODULE_PARM_DESC(force_munmap, + "\n<0|1[,...]> Force the application to unmap previously" + "\nmapped buffer memory before calling any VIDIOC_S_CROP or" + "\nVIDIOC_S_FMT ioctl's. Not all the applications support" + "\nthis feature. This parameter is specific for each" + "\ndetected camera." + "\n 0 = do not force memory unmapping" + "\n 1 = force memory unmapping (save memory)" + "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"." + "\n"); + +static unsigned int frame_timeout[] = {[0 ... SN9C102_MAX_DEVICES-1] = + SN9C102_FRAME_TIMEOUT}; +module_param_array(frame_timeout, uint, NULL, 0644); +MODULE_PARM_DESC(frame_timeout, + "\n<n[,...]> Timeout for a video frame in seconds." + "\nThis parameter is specific for each detected camera." + "\nDefault value is "__MODULE_STRING(SN9C102_FRAME_TIMEOUT)"." + "\n"); + +#ifdef SN9C102_DEBUG +static unsigned short debug = SN9C102_DEBUG_LEVEL; +module_param(debug, ushort, 0644); +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 3:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = more verbose messages" + "\nLevel 3 is useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(SN9C102_DEBUG_LEVEL)"." + "\n"); +#endif + +/*****************************************************************************/ + +static sn9c102_sof_header_t sn9c102_sof_header[] = { + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x00}, + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x01}, +}; + +static sn9c103_sof_header_t sn9c103_sof_header[] = { + {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x20}, +}; + +static sn9c102_eof_header_t sn9c102_eof_header[] = { + {0x00, 0x00, 0x00, 0x00}, + {0x40, 0x00, 0x00, 0x00}, + {0x80, 0x00, 0x00, 0x00}, + {0xc0, 0x00, 0x00, 0x00}, +}; + +/*****************************************************************************/ + +static u32 +sn9c102_request_buffers(struct sn9c102_device* cam, u32 count, + enum sn9c102_io_method io) +{ + struct v4l2_pix_format* p = &(cam->sensor.pix_format); + struct v4l2_rect* r = &(cam->sensor.cropcap.bounds); + const size_t imagesize = cam->module_param.force_munmap || + io == IO_READ ? + (p->width * p->height * p->priv) / 8 : + (r->width * r->height * p->priv) / 8; + void* buff = NULL; + u32 i; + + if (count > SN9C102_MAX_FRAMES) + count = SN9C102_MAX_FRAMES; + + cam->nbuffers = count; + while (cam->nbuffers > 0) { + if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize)))) + break; + cam->nbuffers--; + } + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.index = i; + cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.length = imagesize; + cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cam->frame[i].buf.sequence = 0; + cam->frame[i].buf.field = V4L2_FIELD_NONE; + cam->frame[i].buf.memory = V4L2_MEMORY_MMAP; + cam->frame[i].buf.flags = 0; + } + + return cam->nbuffers; +} + + +static void sn9c102_release_buffers(struct sn9c102_device* cam) +{ + if (cam->nbuffers) { + vfree(cam->frame[0].bufmem); + cam->nbuffers = 0; + } + cam->frame_current = NULL; +} + + +static void sn9c102_empty_framequeues(struct sn9c102_device* cam) +{ + u32 i; + + INIT_LIST_HEAD(&cam->inqueue); + INIT_LIST_HEAD(&cam->outqueue); + + for (i = 0; i < SN9C102_MAX_FRAMES; i++) { + cam->frame[i].state = F_UNUSED; + cam->frame[i].buf.bytesused = 0; + } +} + + +static void sn9c102_requeue_outqueue(struct sn9c102_device* cam) +{ + struct sn9c102_frame_t *i; + + list_for_each_entry(i, &cam->outqueue, frame) { + i->state = F_QUEUED; + list_add(&i->frame, &cam->inqueue); + } + + INIT_LIST_HEAD(&cam->outqueue); +} + + +static void sn9c102_queue_unusedframes(struct sn9c102_device* cam) +{ + unsigned long lock_flags; + u32 i; + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].state == F_UNUSED) { + cam->frame[i].state = F_QUEUED; + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[i].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + } +} + +/*****************************************************************************/ + +int sn9c102_write_regs(struct sn9c102_device* cam, u8* buff, u16 index) +{ + struct usb_device* udev = cam->usbdev; + int i, res; + + if (index + sizeof(buff) >= ARRAY_SIZE(cam->reg)) + return -1; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + index, 0, buff, sizeof(buff), + SN9C102_CTRL_TIMEOUT*sizeof(buff)); + if (res < 0) { + DBG(3, "Failed to write registers (index 0x%02X, error %d)", + index, res); + return -1; + } + + for (i = 0; i < sizeof(buff); i++) + cam->reg[index+i] = buff[i]; + + return 0; +} + + +int sn9c102_write_reg(struct sn9c102_device* cam, u8 value, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + if (index >= ARRAY_SIZE(cam->reg)) + return -1; + + *buff = value; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + index, 0, buff, 1, SN9C102_CTRL_TIMEOUT); + if (res < 0) { + DBG(3, "Failed to write a register (value 0x%02X, index " + "0x%02X, error %d)", value, index, res); + return -1; + } + + cam->reg[index] = value; + + return 0; +} + + +/* NOTE: reading some registers always returns 0 */ +static int sn9c102_read_reg(struct sn9c102_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + index, 0, buff, 1, SN9C102_CTRL_TIMEOUT); + if (res < 0) + DBG(3, "Failed to read a register (index 0x%02X, error %d)", + index, res); + + return (res >= 0) ? (int)(*buff) : -1; +} + + +int sn9c102_pread_reg(struct sn9c102_device* cam, u16 index) +{ + if (index >= ARRAY_SIZE(cam->reg)) + return -1; + + return cam->reg[index]; +} + + +static int +sn9c102_i2c_wait(struct sn9c102_device* cam, struct sn9c102_sensor* sensor) +{ + int i, r; + + for (i = 1; i <= 5; i++) { + r = sn9c102_read_reg(cam, 0x08); + if (r < 0) + return -EIO; + if (r & 0x04) + return 0; + if (sensor->frequency & SN9C102_I2C_400KHZ) + udelay(5*16); + else + udelay(16*16); + } + return -EBUSY; +} + + +static int +sn9c102_i2c_detect_read_error(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor) +{ + int r; + r = sn9c102_read_reg(cam, 0x08); + return (r < 0 || (r >= 0 && !(r & 0x08))) ? -EIO : 0; +} + + +static int +sn9c102_i2c_detect_write_error(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor) +{ + int r; + r = sn9c102_read_reg(cam, 0x08); + return (r < 0 || (r >= 0 && (r & 0x08))) ? -EIO : 0; +} + + +int +sn9c102_i2c_try_raw_read(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 data0, u8 data1, + u8 n, u8 buffer[]) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + /* Write cycle */ + data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) | + ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) | 0x10; + data[1] = data0; /* I2C slave id */ + data[2] = data1; /* address */ + data[7] = 0x10; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_wait(cam, sensor); + + /* Read cycle - n bytes */ + data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) | + ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) | + (n << 4) | 0x02; + data[1] = data0; + data[7] = 0x10; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_wait(cam, sensor); + + /* The first read byte will be placed in data[4] */ + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + 0x0a, 0, data, 5, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_detect_read_error(cam, sensor); + + PDBGG("I2C read: address 0x%02X, first read byte: 0x%02X", data1, + data[4]); + + if (err) { + DBG(3, "I2C read failed for %s image sensor", sensor->name); + return -1; + } + + if (buffer) + memcpy(buffer, data, sizeof(buffer)); + + return (int)data[4]; +} + + +int +sn9c102_i2c_try_raw_write(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 n, u8 data0, + u8 data1, u8 data2, u8 data3, u8 data4, u8 data5) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + /* Write cycle. It usually is address + value */ + data[0] = ((sensor->interface == SN9C102_I2C_2WIRES) ? 0x80 : 0) | + ((sensor->frequency & SN9C102_I2C_400KHZ) ? 0x01 : 0) + | ((n - 1) << 4); + data[1] = data0; + data[2] = data1; + data[3] = data2; + data[4] = data3; + data[5] = data4; + data[6] = data5; + data[7] = 0x14; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41, + 0x08, 0, data, 8, SN9C102_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += sn9c102_i2c_wait(cam, sensor); + err += sn9c102_i2c_detect_write_error(cam, sensor); + + if (err) + DBG(3, "I2C write failed for %s image sensor", sensor->name); + + PDBGG("I2C raw write: %u bytes, data0 = 0x%02X, data1 = 0x%02X, " + "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X", + n, data0, data1, data2, data3, data4, data5); + + return err ? -1 : 0; +} + + +int +sn9c102_i2c_try_read(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 address) +{ + return sn9c102_i2c_try_raw_read(cam, sensor, sensor->i2c_slave_id, + address, 1, NULL); +} + + +int +sn9c102_i2c_try_write(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 address, u8 value) +{ + return sn9c102_i2c_try_raw_write(cam, sensor, 3, + sensor->i2c_slave_id, address, + value, 0, 0, 0); +} + + +int sn9c102_i2c_read(struct sn9c102_device* cam, u8 address) +{ + return sn9c102_i2c_try_read(cam, &cam->sensor, address); +} + + +int sn9c102_i2c_write(struct sn9c102_device* cam, u8 address, u8 value) +{ + return sn9c102_i2c_try_write(cam, &cam->sensor, address, value); +} + +/*****************************************************************************/ + +static void* +sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len) +{ + size_t soflen = 0, i; + u8 j, n = 0; + + switch (cam->bridge) { + case BRIDGE_SN9C101: + case BRIDGE_SN9C102: + soflen = sizeof(sn9c102_sof_header_t); + n = sizeof(sn9c102_sof_header) / soflen; + break; + case BRIDGE_SN9C103: + soflen = sizeof(sn9c103_sof_header_t); + n = sizeof(sn9c103_sof_header) / soflen; + } + + for (i = 0; (len >= soflen) && (i <= len - soflen); i++) + for (j = 0; j < n; j++) + /* The invariable part of the header is 6 bytes long */ + if ((cam->bridge != BRIDGE_SN9C103 && + !memcmp(mem + i, sn9c102_sof_header[j], 6)) || + (cam->bridge == BRIDGE_SN9C103 && + !memcmp(mem + i, sn9c103_sof_header[j], 6))) { + memcpy(cam->sof_header, mem + i, soflen); + /* Skip the header */ + return mem + i + soflen; + } + + return NULL; +} + + +static void* +sn9c102_find_eof_header(struct sn9c102_device* cam, void* mem, size_t len) +{ + size_t eoflen = sizeof(sn9c102_eof_header_t), i; + unsigned j, n = sizeof(sn9c102_eof_header) / eoflen; + + if (cam->sensor.pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X) + return NULL; /* EOF header does not exist in compressed data */ + + for (i = 0; (len >= eoflen) && (i <= len - eoflen); i++) + for (j = 0; j < n; j++) + if (!memcmp(mem + i, sn9c102_eof_header[j], eoflen)) + return mem + i; + + return NULL; +} + + +static void sn9c102_urb_complete(struct urb *urb, struct pt_regs* regs) +{ + struct sn9c102_device* cam = urb->context; + struct sn9c102_frame_t** f; + size_t imagesize, soflen; + u8 i; + int err = 0; + + if (urb->status == -ENOENT) + return; + + f = &cam->frame_current; + + if (cam->stream == STREAM_INTERRUPT) { + cam->stream = STREAM_OFF; + if ((*f)) + (*f)->state = F_QUEUED; + DBG(3, "Stream interrupted"); + wake_up(&cam->wait_stream); + } + + if (cam->state & DEV_DISCONNECTED) + return; + + if (cam->state & DEV_MISCONFIGURED) { + wake_up_interruptible(&cam->wait_frame); + return; + } + + if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue)) + goto resubmit_urb; + + if (!(*f)) + (*f) = list_entry(cam->inqueue.next, struct sn9c102_frame_t, + frame); + + imagesize = (cam->sensor.pix_format.width * + cam->sensor.pix_format.height * + cam->sensor.pix_format.priv) / 8; + + soflen = (cam->bridge) == BRIDGE_SN9C103 ? + sizeof(sn9c103_sof_header_t) : + sizeof(sn9c102_sof_header_t); + + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int img, len, status; + void *pos, *sof, *eof; + + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status) { + DBG(3, "Error in isochronous frame"); + (*f)->state = F_ERROR; + continue; + } + + PDBGG("Isochrnous frame: length %u, #%u i", len, i); + +redo: + sof = sn9c102_find_sof_header(cam, pos, len); + if (likely(!sof)) { + eof = sn9c102_find_eof_header(cam, pos, len); + if ((*f)->state == F_GRABBING) { +end_of_frame: + img = len; + + if (eof) + img = (eof > pos) ? eof - pos - 1 : 0; + + if ((*f)->buf.bytesused+img > imagesize) { + u32 b; + b = (*f)->buf.bytesused + img - + imagesize; + img = imagesize - (*f)->buf.bytesused; + DBG(3, "Expected EOF not found: " + "video frame cut"); + if (eof) + DBG(3, "Exceeded limit: +%u " + "bytes", (unsigned)(b)); + } + + memcpy((*f)->bufmem + (*f)->buf.bytesused, pos, + img); + + if ((*f)->buf.bytesused == 0) + do_gettimeofday(&(*f)->buf.timestamp); + + (*f)->buf.bytesused += img; + + if ((*f)->buf.bytesused == imagesize || + (cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_SN9C10X && eof)) { + u32 b; + b = (*f)->buf.bytesused; + (*f)->state = F_DONE; + (*f)->buf.sequence= ++cam->frame_count; + spin_lock(&cam->queue_lock); + list_move_tail(&(*f)->frame, + &cam->outqueue); + if (!list_empty(&cam->inqueue)) + (*f) = list_entry( + cam->inqueue.next, + struct sn9c102_frame_t, + frame ); + else + (*f) = NULL; + spin_unlock(&cam->queue_lock); + memcpy(cam->sysfs.frame_header, + cam->sof_header, soflen); + DBG(3, "Video frame captured: %lu " + "bytes", (unsigned long)(b)); + + if (!(*f)) + goto resubmit_urb; + + } else if (eof) { + (*f)->state = F_ERROR; + DBG(3, "Not expected EOF after %lu " + "bytes of image data", + (unsigned long) + ((*f)->buf.bytesused)); + } + + if (sof) /* (1) */ + goto start_of_frame; + + } else if (eof) { + DBG(3, "EOF without SOF"); + continue; + + } else { + PDBGG("Ignoring pointless isochronous frame"); + continue; + } + + } else if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) { +start_of_frame: + (*f)->state = F_GRABBING; + (*f)->buf.bytesused = 0; + len -= (sof - pos); + pos = sof; + DBG(3, "SOF detected: new video frame"); + if (len) + goto redo; + + } else if ((*f)->state == F_GRABBING) { + eof = sn9c102_find_eof_header(cam, pos, len); + if (eof && eof < sof) + goto end_of_frame; /* (1) */ + else { + if (cam->sensor.pix_format.pixelformat == + V4L2_PIX_FMT_SN9C10X) { + eof = sof - soflen; + goto end_of_frame; + } else { + DBG(3, "SOF before expected EOF after " + "%lu bytes of image data", + (unsigned long) + ((*f)->buf.bytesused)); + goto start_of_frame; + } + } + } + } + +resubmit_urb: + urb->dev = cam->usbdev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0 && err != -EPERM) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "usb_submit_urb() failed"); + } + + wake_up_interruptible(&cam->wait_frame); +} + + +static int sn9c102_start_transfer(struct sn9c102_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512, + 680, 800, 900, 1023}; + const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512, + 680, 800, 900, 1003}; + const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ? + sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] : + sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING]; + s8 i, j; + int err = 0; + + for (i = 0; i < SN9C102_URBS; i++) { + cam->transfer_buffer[i] = kzalloc(SN9C102_ISO_PACKETS * psz, + GFP_KERNEL); + if (!cam->transfer_buffer[i]) { + err = -ENOMEM; + DBG(1, "Not enough memory"); + goto free_buffers; + } + } + + for (i = 0; i < SN9C102_URBS; i++) { + urb = usb_alloc_urb(SN9C102_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + err = -ENOMEM; + DBG(1, "usb_alloc_urb() failed"); + goto free_urbs; + } + urb->dev = udev; + urb->context = cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = SN9C102_ISO_PACKETS; + urb->complete = sn9c102_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = psz * SN9C102_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < SN9C102_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = psz * j; + urb->iso_frame_desc[j].length = psz; + } + } + + /* Enable video */ + if (!(cam->reg[0x01] & 0x04)) { + err = sn9c102_write_reg(cam, cam->reg[0x01] | 0x04, 0x01); + if (err) { + err = -EIO; + DBG(1, "I/O hardware error"); + goto free_urbs; + } + } + + err = usb_set_interface(udev, 0, SN9C102_ALTERNATE_SETTING); + if (err) { + DBG(1, "usb_set_interface() failed"); + goto free_urbs; + } + + cam->frame_current = NULL; + + for (i = 0; i < SN9C102_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + for (j = i-1; j >= 0; j--) + usb_kill_urb(cam->urb[j]); + DBG(1, "usb_submit_urb() failed, error %d", err); + goto free_urbs; + } + } + + return 0; + +free_urbs: + for (i = 0; (i < SN9C102_URBS) && cam->urb[i]; i++) + usb_free_urb(cam->urb[i]); + +free_buffers: + for (i = 0; (i < SN9C102_URBS) && cam->transfer_buffer[i]; i++) + kfree(cam->transfer_buffer[i]); + + return err; +} + + +static int sn9c102_stop_transfer(struct sn9c102_device* cam) +{ + struct usb_device *udev = cam->usbdev; + s8 i; + int err = 0; + + if (cam->state & DEV_DISCONNECTED) + return 0; + + for (i = SN9C102_URBS-1; i >= 0; i--) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + kfree(cam->transfer_buffer[i]); + } + + err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + if (err) + DBG(3, "usb_set_interface() failed"); + + return err; +} + + +static int sn9c102_stream_interrupt(struct sn9c102_device* cam) +{ + long timeout; + + cam->stream = STREAM_INTERRUPT; + timeout = wait_event_timeout(cam->wait_stream, + (cam->stream == STREAM_OFF) || + (cam->state & DEV_DISCONNECTED), + SN9C102_URB_TIMEOUT); + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + else if (cam->stream != STREAM_OFF) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "URB timeout reached. The camera is misconfigured. " + "To use it, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + return 0; +} + +/*****************************************************************************/ + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static u8 sn9c102_strtou8(const char* buff, size_t len, ssize_t* count) +{ + char str[5]; + char* endp; + unsigned long val; + + if (len < 4) { + strncpy(str, buff, len); + str[len+1] = '\0'; + } else { + strncpy(str, buff, 4); + str[4] = '\0'; + } + + val = simple_strtoul(str, &endp, 0); + + *count = 0; + if (val <= 0xff) + *count = (ssize_t)(endp - str); + if ((*count) && (len == *count+1) && (buff[*count] == '\n')) + *count += 1; + + return (u8)val; +} + +/* + NOTE 1: being inside one of the following methods implies that the v4l + device exists for sure (see kobjects and reference counters) + NOTE 2: buffers are PAGE_SIZE long +*/ + +static ssize_t sn9c102_show_reg(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.reg); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + index = sn9c102_strtou8(buf, len, &count); + if (index > 0x1f || !count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.reg = index; + + DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t sn9c102_show_val(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + if ((val = sn9c102_read_reg(cam, cam->sysfs.reg)) < 0) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_val(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + value = sn9c102_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + err = sn9c102_write_reg(cam, value, cam->sysfs.reg); + if (err) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + DBG(2, "Written SN9C10X reg. 0x%02X, val. 0x%02X", + cam->sysfs.reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t sn9c102_show_i2c_reg(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_i2c_reg(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 index; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + index = sn9c102_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + cam->sysfs.i2c_reg = index; + + DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t sn9c102_show_i2c_val(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + int val; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & SN9C102_I2C_READ)) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENOSYS; + } + + if ((val = sn9c102_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + count = sprintf(buf, "%d\n", val); + + DBG(3, "Read bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_i2c_val(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + u8 value; + ssize_t count; + int err; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + if (!(cam->sensor.sysfs_ops & SN9C102_I2C_WRITE)) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENOSYS; + } + + value = sn9c102_strtou8(buf, len, &count); + if (!count) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EINVAL; + } + + err = sn9c102_i2c_write(cam, cam->sysfs.i2c_reg, value); + if (err) { + mutex_unlock(&sn9c102_sysfs_lock); + return -EIO; + } + + DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X", + cam->sysfs.i2c_reg, value); + DBG(3, "Written bytes: %zd", count); + + mutex_unlock(&sn9c102_sysfs_lock); + + return count; +} + + +static ssize_t +sn9c102_store_green(struct class_device* cd, const char* buf, size_t len) +{ + struct sn9c102_device* cam; + enum sn9c102_bridge bridge; + ssize_t res = 0; + u8 value; + ssize_t count; + + if (mutex_lock_interruptible(&sn9c102_sysfs_lock)) + return -ERESTARTSYS; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) { + mutex_unlock(&sn9c102_sysfs_lock); + return -ENODEV; + } + + bridge = cam->bridge; + + mutex_unlock(&sn9c102_sysfs_lock); + + value = sn9c102_strtou8(buf, len, &count); + if (!count) + return -EINVAL; + + switch (bridge) { + case BRIDGE_SN9C101: + case BRIDGE_SN9C102: + if (value > 0x0f) + return -EINVAL; + if ((res = sn9c102_store_reg(cd, "0x11", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + break; + case BRIDGE_SN9C103: + if (value > 0x7f) + return -EINVAL; + if ((res = sn9c102_store_reg(cd, "0x04", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + break; + } + + return res; +} + + +static ssize_t +sn9c102_store_blue(struct class_device* cd, const char* buf, size_t len) +{ + ssize_t res = 0; + u8 value; + ssize_t count; + + value = sn9c102_strtou8(buf, len, &count); + if (!count || value > 0x7f) + return -EINVAL; + + if ((res = sn9c102_store_reg(cd, "0x06", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + + return res; +} + + +static ssize_t +sn9c102_store_red(struct class_device* cd, const char* buf, size_t len) +{ + ssize_t res = 0; + u8 value; + ssize_t count; + + value = sn9c102_strtou8(buf, len, &count); + if (!count || value > 0x7f) + return -EINVAL; + + if ((res = sn9c102_store_reg(cd, "0x05", 4)) >= 0) + res = sn9c102_store_val(cd, buf, len); + + return res; +} + + +static ssize_t sn9c102_show_frame_header(struct class_device* cd, char* buf) +{ + struct sn9c102_device* cam; + ssize_t count; + + cam = video_get_drvdata(to_video_device(cd)); + if (!cam) + return -ENODEV; + + count = sizeof(cam->sysfs.frame_header); + memcpy(buf, cam->sysfs.frame_header, count); + + DBG(3, "Frame header, read bytes: %zd", count); + + return count; +} + + +static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR, + sn9c102_show_reg, sn9c102_store_reg); +static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR, + sn9c102_show_val, sn9c102_store_val); +static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR, + sn9c102_show_i2c_reg, sn9c102_store_i2c_reg); +static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR, + sn9c102_show_i2c_val, sn9c102_store_i2c_val); +static CLASS_DEVICE_ATTR(green, S_IWUGO, NULL, sn9c102_store_green); +static CLASS_DEVICE_ATTR(blue, S_IWUGO, NULL, sn9c102_store_blue); +static CLASS_DEVICE_ATTR(red, S_IWUGO, NULL, sn9c102_store_red); +static CLASS_DEVICE_ATTR(frame_header, S_IRUGO, + sn9c102_show_frame_header, NULL); + + +static void sn9c102_create_sysfs(struct sn9c102_device* cam) +{ + struct video_device *v4ldev = cam->v4ldev; + + video_device_create_file(v4ldev, &class_device_attr_reg); + video_device_create_file(v4ldev, &class_device_attr_val); + video_device_create_file(v4ldev, &class_device_attr_frame_header); + if (cam->bridge == BRIDGE_SN9C101 || cam->bridge == BRIDGE_SN9C102) + video_device_create_file(v4ldev, &class_device_attr_green); + else if (cam->bridge == BRIDGE_SN9C103) { + video_device_create_file(v4ldev, &class_device_attr_blue); + video_device_create_file(v4ldev, &class_device_attr_red); + } + if (cam->sensor.sysfs_ops) { + video_device_create_file(v4ldev, &class_device_attr_i2c_reg); + video_device_create_file(v4ldev, &class_device_attr_i2c_val); + } +} +#endif /* CONFIG_VIDEO_ADV_DEBUG */ + +/*****************************************************************************/ + +static int +sn9c102_set_pix_format(struct sn9c102_device* cam, struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, cam->reg[0x18] | 0x80, 0x18); + else + err += sn9c102_write_reg(cam, cam->reg[0x18] & 0x7f, 0x18); + + return err ? -EIO : 0; +} + + +static int +sn9c102_set_compression(struct sn9c102_device* cam, + struct v4l2_jpegcompression* compression) +{ + int err = 0; + + if (compression->quality == 0) + err += sn9c102_write_reg(cam, cam->reg[0x17] | 0x01, 0x17); + else if (compression->quality == 1) + err += sn9c102_write_reg(cam, cam->reg[0x17] & 0xfe, 0x17); + + return err ? -EIO : 0; +} + + +static int sn9c102_set_scale(struct sn9c102_device* cam, u8 scale) +{ + u8 r = 0; + int err = 0; + + if (scale == 1) + r = cam->reg[0x18] & 0xcf; + else if (scale == 2) { + r = cam->reg[0x18] & 0xcf; + r |= 0x10; + } else if (scale == 4) + r = cam->reg[0x18] | 0x20; + + err += sn9c102_write_reg(cam, r, 0x18); + if (err) + return -EIO; + + PDBGG("Scaling factor: %u", scale); + + return 0; +} + + +static int sn9c102_set_crop(struct sn9c102_device* cam, struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &cam->sensor; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left), + v_start = (u8)(rect->top - s->cropcap.bounds.top), + h_size = (u8)(rect->width / 16), + v_size = (u8)(rect->height / 16); + int err = 0; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + err += sn9c102_write_reg(cam, h_size, 0x15); + err += sn9c102_write_reg(cam, v_size, 0x16); + if (err) + return -EIO; + + PDBGG("h_start, v_start, h_size, v_size, ho_size, vo_size " + "%u %u %u %u", h_start, v_start, h_size, v_size); + + return 0; +} + + +static int sn9c102_init(struct sn9c102_device* cam) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + struct v4l2_queryctrl *qctrl; + struct v4l2_rect* rect; + u8 i = 0; + int err = 0; + + if (!(cam->state & DEV_INITIALIZED)) { + init_waitqueue_head(&cam->open); + qctrl = s->qctrl; + rect = &(s->cropcap.defrect); + } else { /* use current values */ + qctrl = s->_qctrl; + rect = &(s->_rect); + } + + err += sn9c102_set_scale(cam, rect->width / s->pix_format.width); + err += sn9c102_set_crop(cam, rect); + if (err) + return err; + + if (s->init) { + err = s->init(cam); + if (err) { + DBG(3, "Sensor initialization failed"); + return err; + } + } + + if (!(cam->state & DEV_INITIALIZED)) + cam->compression.quality = cam->reg[0x17] & 0x01 ? 0 : 1; + else + err += sn9c102_set_compression(cam, &cam->compression); + err += sn9c102_set_pix_format(cam, &s->pix_format); + if (s->set_pix_format) + err += s->set_pix_format(cam, &s->pix_format); + if (err) + return err; + + if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X) + DBG(3, "Compressed video format is active, quality %d", + cam->compression.quality); + else + DBG(3, "Uncompressed video format is active"); + + if (s->set_crop) + if ((err = s->set_crop(cam, rect))) { + DBG(3, "set_crop() failed"); + return err; + } + + if (s->set_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && + !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { + ctrl.id = s->qctrl[i].id; + ctrl.value = qctrl[i].default_value; + err = s->set_ctrl(cam, &ctrl); + if (err) { + DBG(3, "Set %s control failed", + s->qctrl[i].name); + return err; + } + DBG(3, "Image sensor supports '%s' control", + s->qctrl[i].name); + } + } + + if (!(cam->state & DEV_INITIALIZED)) { + mutex_init(&cam->fileop_mutex); + spin_lock_init(&cam->queue_lock); + init_waitqueue_head(&cam->wait_frame); + init_waitqueue_head(&cam->wait_stream); + cam->nreadbuffers = 2; + memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); + memcpy(&(s->_rect), &(s->cropcap.defrect), + sizeof(struct v4l2_rect)); + cam->state |= DEV_INITIALIZED; + } + + DBG(2, "Initialization succeeded"); + return 0; +} + + +static void sn9c102_release_resources(struct sn9c102_device* cam) +{ + mutex_lock(&sn9c102_sysfs_lock); + + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + video_set_drvdata(cam->v4ldev, NULL); + video_unregister_device(cam->v4ldev); + + usb_put_dev(cam->usbdev); + + mutex_unlock(&sn9c102_sysfs_lock); + + kfree(cam->control_buffer); +} + +/*****************************************************************************/ + +static int sn9c102_open(struct inode* inode, struct file* filp) +{ + struct sn9c102_device* cam; + int err = 0; + + /* + This is the only safe way to prevent race conditions with + disconnect + */ + if (!down_read_trylock(&sn9c102_disconnect)) + return -ERESTARTSYS; + + cam = video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->dev_mutex)) { + up_read(&sn9c102_disconnect); + return -ERESTARTSYS; + } + + if (cam->users) { + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + if ((filp->f_flags & O_NONBLOCK) || + (filp->f_flags & O_NDELAY)) { + err = -EWOULDBLOCK; + goto out; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->state & DEV_DISCONNECTED + || !cam->users); + if (err) { + up_read(&sn9c102_disconnect); + return err; + } + if (cam->state & DEV_DISCONNECTED) { + up_read(&sn9c102_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + + if (cam->state & DEV_MISCONFIGURED) { + err = sn9c102_init(cam); + if (err) { + DBG(1, "Initialization failed again. " + "I will retry on next open()."); + goto out; + } + cam->state &= ~DEV_MISCONFIGURED; + } + + if ((err = sn9c102_start_transfer(cam))) + goto out; + + filp->private_data = cam; + cam->users++; + cam->io = IO_NONE; + cam->stream = STREAM_OFF; + cam->nbuffers = 0; + cam->frame_count = 0; + sn9c102_empty_framequeues(cam); + + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + +out: + mutex_unlock(&cam->dev_mutex); + up_read(&sn9c102_disconnect); + return err; +} + + +static int sn9c102_release(struct inode* inode, struct file* filp) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + sn9c102_stop_transfer(cam); + + sn9c102_release_buffers(cam); + + if (cam->state & DEV_DISCONNECTED) { + sn9c102_release_resources(cam); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + wake_up_interruptible_nr(&cam->open, 1); + + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + + mutex_unlock(&cam->dev_mutex); + + return 0; +} + + +static ssize_t +sn9c102_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_frame_t* f, * i; + unsigned long lock_flags; + long timeout; + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io == IO_MMAP) { + DBG(3, "Close and open the device again to choose " + "the read method"); + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + if (cam->io == IO_NONE) { + if (!sn9c102_request_buffers(cam,cam->nreadbuffers, IO_READ)) { + DBG(1, "read() failed, not enough memory"); + mutex_unlock(&cam->fileop_mutex); + return -ENOMEM; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (list_empty(&cam->inqueue)) { + if (!list_empty(&cam->outqueue)) + sn9c102_empty_framequeues(cam); + sn9c102_queue_unusedframes(cam); + } + + if (!count) { + mutex_unlock(&cam->fileop_mutex); + return 0; + } + + if (list_empty(&cam->outqueue)) { + if (filp->f_flags & O_NONBLOCK) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) { + mutex_unlock(&cam->fileop_mutex); + return timeout; + } + if (cam->state & DEV_DISCONNECTED) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + if (!timeout || (cam->state & DEV_MISCONFIGURED)) { + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + } + + f = list_entry(cam->outqueue.prev, struct sn9c102_frame_t, frame); + + if (count > f->buf.bytesused) + count = f->buf.bytesused; + + if (copy_to_user(buf, f->bufmem, count)) { + err = -EFAULT; + goto exit; + } + *f_pos += count; + +exit: + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(i, &cam->outqueue, frame) + i->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + sn9c102_queue_unusedframes(cam); + + PDBGG("Frame #%lu, bytes read: %zu", + (unsigned long)f->buf.index, count); + + mutex_unlock(&cam->fileop_mutex); + + return count; +} + + +static unsigned int sn9c102_poll(struct file *filp, poll_table *wait) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + struct sn9c102_frame_t* f; + unsigned long lock_flags; + unsigned int mask = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return POLLERR; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + goto error; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + goto error; + } + + if (cam->io == IO_NONE) { + if (!sn9c102_request_buffers(cam, cam->nreadbuffers, + IO_READ)) { + DBG(1, "poll() failed, not enough memory"); + goto error; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (cam->io == IO_READ) { + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(f, &cam->outqueue, frame) + f->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + sn9c102_queue_unusedframes(cam); + } + + poll_wait(filp, &cam->wait_frame, wait); + + if (!list_empty(&cam->outqueue)) + mask |= POLLIN | POLLRDNORM; + + mutex_unlock(&cam->fileop_mutex); + + return mask; + +error: + mutex_unlock(&cam->fileop_mutex); + return POLLERR; +} + + +static void sn9c102_vm_open(struct vm_area_struct* vma) +{ + struct sn9c102_frame_t* f = vma->vm_private_data; + f->vma_use_count++; +} + + +static void sn9c102_vm_close(struct vm_area_struct* vma) +{ + /* NOTE: buffers are not freed here */ + struct sn9c102_frame_t* f = vma->vm_private_data; + f->vma_use_count--; +} + + +static struct vm_operations_struct sn9c102_vm_ops = { + .open = sn9c102_vm_open, + .close = sn9c102_vm_close, +}; + + +static int sn9c102_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(cam->frame[0].buf.length)) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) { + if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == cam->nbuffers) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; + + pos = cam->frame[i].bufmem; + while (size > 0) { /* size is page-aligned */ + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &sn9c102_vm_ops; + vma->vm_private_data = &cam->frame[i]; + + sn9c102_vm_open(vma); + + mutex_unlock(&cam->fileop_mutex); + + return 0; +} + +/*****************************************************************************/ + +static int +sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_capability cap = { + .driver = "sn9c102", + .version = SN9C102_MODULE_VERSION_CODE, + .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING, + }; + + strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card)); + if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0) + strlcpy(cap.bus_info, cam->usbdev->dev.bus_id, + sizeof(cap.bus_info)); + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_input i; + + if (copy_from_user(&i, arg, sizeof(i))) + return -EFAULT; + + if (i.index) + return -EINVAL; + + memset(&i, 0, sizeof(i)); + strcpy(i.name, "Camera"); + i.type = V4L2_INPUT_TYPE_CAMERA; + + if (copy_to_user(arg, &i, sizeof(i))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_g_input(struct sn9c102_device* cam, void __user * arg) +{ + int index = 0; + + if (copy_to_user(arg, &index, sizeof(index))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_input(struct sn9c102_device* cam, void __user * arg) +{ + int index; + + if (copy_from_user(&index, arg, sizeof(index))) + return -EFAULT; + + if (index != 0) + return -EINVAL; + + return 0; +} + + +static int +sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_queryctrl qc; + u8 i; + + if (copy_from_user(&qc, arg, sizeof(qc))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (qc.id && qc.id == s->qctrl[i].id) { + memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); + if (copy_to_user(arg, &qc, sizeof(qc))) + return -EFAULT; + return 0; + } + + return -EINVAL; +} + + +static int +sn9c102_vidioc_g_ctrl(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + int err = 0; + u8 i; + + if (!s->get_ctrl && !s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + if (!s->get_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id && ctrl.id == s->qctrl[i].id) { + ctrl.value = s->_qctrl[i].default_value; + goto exit; + } + return -EINVAL; + } else + err = s->get_ctrl(cam, &ctrl); + +exit: + if (copy_to_user(arg, &ctrl, sizeof(ctrl))) + return -EFAULT; + + return err; +} + + +static int +sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + u8 i; + int err = 0; + + if (!s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED) + return -EINVAL; + if (ctrl.value < s->qctrl[i].minimum || + ctrl.value > s->qctrl[i].maximum) + return -ERANGE; + ctrl.value -= ctrl.value % s->qctrl[i].step; + break; + } + + if ((err = s->set_ctrl(cam, &ctrl))) + return err; + + s->_qctrl[i].default_value = ctrl.value; + + PDBGG("VIDIOC_S_CTRL: id %lu, value %lu", + (unsigned long)ctrl.id, (unsigned long)ctrl.value); + + return 0; +} + + +static int +sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_cropcap* cc = &(cam->sensor.cropcap); + + cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cc->pixelaspect.numerator = 1; + cc->pixelaspect.denominator = 1; + + if (copy_to_user(arg, cc, sizeof(*cc))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_crop crop = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + }; + + memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect)); + + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_crop crop; + struct v4l2_rect* rect; + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_pix_format* pix_format = &(s->pix_format); + u8 scale; + const enum sn9c102_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&crop, arg, sizeof(crop))) + return -EFAULT; + + rect = &(crop.c); + + if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_CROP failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + /* Preserve R,G or B origin */ + rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L; + rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L; + + if (rect->width < 16) + rect->width = 16; + if (rect->height < 16) + rect->height = 16; + if (rect->width > bounds->width) + rect->width = bounds->width; + if (rect->height > bounds->height) + rect->height = bounds->height; + if (rect->left < bounds->left) + rect->left = bounds->left; + if (rect->top < bounds->top) + rect->top = bounds->top; + if (rect->left + rect->width > bounds->left + bounds->width) + rect->left = bounds->left+bounds->width - rect->width; + if (rect->top + rect->height > bounds->top + bounds->height) + rect->top = bounds->top+bounds->height - rect->height; + + rect->width &= ~15L; + rect->height &= ~15L; + + if (SN9C102_PRESERVE_IMGSCALE) { + /* Calculate the actual scaling factor */ + u32 a, b; + a = rect->width * rect->height; + b = pix_format->width * pix_format->height; + scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1; + } else + scale = 1; + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &crop, sizeof(crop))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + sn9c102_release_buffers(cam); + + err = sn9c102_set_crop(cam, rect); + if (s->set_crop) + err += s->set_crop(cam, rect); + err += sn9c102_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + s->pix_format.width = rect->width/scale; + s->pix_format.height = rect->height/scale; + memcpy(&(s->_rect), rect, sizeof(*rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + sn9c102_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + sn9c102_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_fmtdesc fmtd; + + if (copy_from_user(&fmtd, arg, sizeof(fmtd))) + return -EFAULT; + + if (fmtd.index == 0) { + strcpy(fmtd.description, "bayer rgb"); + fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8; + } else if (fmtd.index == 1) { + strcpy(fmtd.description, "compressed"); + fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X; + fmtd.flags = V4L2_FMT_FLAG_COMPRESSED; + } else + return -EINVAL; + + fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + memset(&fmtd.reserved, 0, sizeof(fmtd.reserved)); + + if (copy_to_user(arg, &fmtd, sizeof(fmtd))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_format format; + struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format); + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X) + ? 0 : (pfmt->width * pfmt->priv) / 8; + pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8); + pfmt->field = V4L2_FIELD_NONE; + memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt)); + + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd, + void __user * arg) +{ + struct sn9c102_sensor* s = &cam->sensor; + struct v4l2_format format; + struct v4l2_pix_format* pix; + struct v4l2_pix_format* pfmt = &(s->pix_format); + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_rect rect; + u8 scale; + const enum sn9c102_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + pix = &(format.fmt.pix); + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memcpy(&rect, &(s->_rect), sizeof(rect)); + + { /* calculate the actual scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1; + } + + rect.width = scale * pix->width; + rect.height = scale * pix->height; + + if (rect.width < 16) + rect.width = 16; + if (rect.height < 16) + rect.height = 16; + if (rect.width > bounds->left + bounds->width - rect.left) + rect.width = bounds->left + bounds->width - rect.left; + if (rect.height > bounds->top + bounds->height - rect.top) + rect.height = bounds->top + bounds->height - rect.top; + + rect.width &= ~15L; + rect.height &= ~15L; + + { /* adjust the scaling factor */ + u32 a, b; + a = rect.width * rect.height; + b = pix->width * pix->height; + scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1; + } + + pix->width = rect.width / scale; + pix->height = rect.height / scale; + + if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X && + pix->pixelformat != V4L2_PIX_FMT_SBGGR8) + pix->pixelformat = pfmt->pixelformat; + pix->priv = pfmt->priv; /* bpp */ + pix->colorspace = pfmt->colorspace; + pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + ? 0 : (pix->width * pix->priv) / 8; + pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8); + pix->field = V4L2_FIELD_NONE; + + if (cmd == VIDIOC_TRY_FMT) { + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + return 0; + } + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_FMT failed. Unmap the " + "buffers first."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &format, sizeof(format))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + sn9c102_release_buffers(cam); + + err += sn9c102_set_pix_format(cam, pix); + err += sn9c102_set_crop(cam, &rect); + if (s->set_pix_format) + err += s->set_pix_format(cam, pix); + if (s->set_crop) + err += s->set_crop(cam, &rect); + err += sn9c102_set_scale(cam, scale); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + memcpy(pfmt, pix, sizeof(*pix)); + memcpy(&(s->_rect), &rect, sizeof(rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + sn9c102_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + sn9c102_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg) +{ + if (copy_to_user(arg, &cam->compression, + sizeof(cam->compression))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_jpegcompression jc; + const enum sn9c102_stream_state stream = cam->stream; + int err = 0; + + if (copy_from_user(&jc, arg, sizeof(jc))) + return -EFAULT; + + if (jc.quality != 0 && jc.quality != 1) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + err += sn9c102_set_compression(cam, &jc); + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " + "problems. To use the camera, close and open " + "/dev/video%d again.", cam->v4ldev->minor); + return -EIO; + } + + cam->compression.quality = jc.quality; + + cam->stream = stream; + + return 0; +} + + +static int +sn9c102_vidioc_reqbufs(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_requestbuffers rb; + u32 i; + int err; + + if (copy_from_user(&rb, arg, sizeof(rb))) + return -EFAULT; + + if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb.memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (cam->io == IO_READ) { + DBG(3, "Close and open the device again to choose the mmap " + "I/O method"); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_REQBUFS failed. Previous buffers are " + "still mapped."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + sn9c102_empty_framequeues(cam); + + sn9c102_release_buffers(cam); + if (rb.count) + rb.count = sn9c102_request_buffers(cam, rb.count, IO_MMAP); + + if (copy_to_user(arg, &rb, sizeof(rb))) { + sn9c102_release_buffers(cam); + cam->io = IO_NONE; + return -EFAULT; + } + + cam->io = rb.count ? IO_MMAP : IO_NONE; + + return 0; +} + + +static int +sn9c102_vidioc_querybuf(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + memcpy(&b, &cam->frame[b.index].buf, sizeof(b)); + + if (cam->frame[b.index].vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (cam->frame[b.index].state == F_DONE) + b.flags |= V4L2_BUF_FLAG_DONE; + else if (cam->frame[b.index].state != F_UNUSED) + b.flags |= V4L2_BUF_FLAG_QUEUED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_qbuf(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + unsigned long lock_flags; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->frame[b.index].state != F_UNUSED) + return -EINVAL; + + cam->frame[b.index].state = F_QUEUED; + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[b.index].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + PDBGG("Frame #%lu queued", (unsigned long)b.index); + + return 0; +} + + +static int +sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp, + void __user * arg) +{ + struct v4l2_buffer b; + struct sn9c102_frame_t *f; + unsigned long lock_flags; + long timeout; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->outqueue)) { + if (cam->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) + return timeout; + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + if (!timeout || (cam->state & DEV_MISCONFIGURED)) + return -EIO; + } + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + f = list_entry(cam->outqueue.next, struct sn9c102_frame_t, frame); + list_del(cam->outqueue.next); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + f->state = F_UNUSED; + + memcpy(&b, &f->buf, sizeof(b)); + if (f->vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index); + + return 0; +} + + +static int +sn9c102_vidioc_streamon(struct sn9c102_device* cam, void __user * arg) +{ + int type; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->inqueue)) + return -EINVAL; + + cam->stream = STREAM_ON; + + DBG(3, "Stream on"); + + return 0; +} + + +static int +sn9c102_vidioc_streamoff(struct sn9c102_device* cam, void __user * arg) +{ + int type, err; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = sn9c102_stream_interrupt(cam))) + return err; + + sn9c102_empty_framequeues(cam); + + DBG(3, "Stream off"); + + return 0; +} + + +static int +sn9c102_vidioc_g_parm(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + return 0; +} + + +static int +sn9c102_vidioc_s_parm(struct sn9c102_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + + if (sp.parm.capture.readbuffers == 0) + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES) + sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + cam->nreadbuffers = sp.parm.capture.readbuffers; + + return 0; +} + + +static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOC_QUERYCAP: + return sn9c102_vidioc_querycap(cam, arg); + + case VIDIOC_ENUMINPUT: + return sn9c102_vidioc_enuminput(cam, arg); + + case VIDIOC_G_INPUT: + return sn9c102_vidioc_g_input(cam, arg); + + case VIDIOC_S_INPUT: + return sn9c102_vidioc_s_input(cam, arg); + + case VIDIOC_QUERYCTRL: + return sn9c102_vidioc_query_ctrl(cam, arg); + + case VIDIOC_G_CTRL: + return sn9c102_vidioc_g_ctrl(cam, arg); + + case VIDIOC_S_CTRL_OLD: + case VIDIOC_S_CTRL: + return sn9c102_vidioc_s_ctrl(cam, arg); + + case VIDIOC_CROPCAP_OLD: + case VIDIOC_CROPCAP: + return sn9c102_vidioc_cropcap(cam, arg); + + case VIDIOC_G_CROP: + return sn9c102_vidioc_g_crop(cam, arg); + + case VIDIOC_S_CROP: + return sn9c102_vidioc_s_crop(cam, arg); + + case VIDIOC_ENUM_FMT: + return sn9c102_vidioc_enum_fmt(cam, arg); + + case VIDIOC_G_FMT: + return sn9c102_vidioc_g_fmt(cam, arg); + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + return sn9c102_vidioc_try_s_fmt(cam, cmd, arg); + + case VIDIOC_G_JPEGCOMP: + return sn9c102_vidioc_g_jpegcomp(cam, arg); + + case VIDIOC_S_JPEGCOMP: + return sn9c102_vidioc_s_jpegcomp(cam, arg); + + case VIDIOC_REQBUFS: + return sn9c102_vidioc_reqbufs(cam, arg); + + case VIDIOC_QUERYBUF: + return sn9c102_vidioc_querybuf(cam, arg); + + case VIDIOC_QBUF: + return sn9c102_vidioc_qbuf(cam, arg); + + case VIDIOC_DQBUF: + return sn9c102_vidioc_dqbuf(cam, filp, arg); + + case VIDIOC_STREAMON: + return sn9c102_vidioc_streamon(cam, arg); + + case VIDIOC_STREAMOFF: + return sn9c102_vidioc_streamoff(cam, arg); + + case VIDIOC_G_PARM: + return sn9c102_vidioc_g_parm(cam, arg); + + case VIDIOC_S_PARM_OLD: + case VIDIOC_S_PARM: + return sn9c102_vidioc_s_parm(cam, arg); + + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYMENU: + return -EINVAL; + + default: + return -EINVAL; + + } +} + + +static int sn9c102_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp)); + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + V4LDBG(3, "sn9c102", cmd); + + err = sn9c102_ioctl_v4l2(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + + return err; +} + +/*****************************************************************************/ + +static struct file_operations sn9c102_fops = { + .owner = THIS_MODULE, + .open = sn9c102_open, + .release = sn9c102_release, + .ioctl = sn9c102_ioctl, + .read = sn9c102_read, + .poll = sn9c102_poll, + .mmap = sn9c102_mmap, + .llseek = no_llseek, +}; + +/*****************************************************************************/ + +/* It exists a single interface only. We do not need to validate anything. */ +static int +sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct sn9c102_device* cam; + static unsigned int dev_nr = 0; + unsigned int i; + int err = 0, r; + + if (!(cam = kzalloc(sizeof(struct sn9c102_device), GFP_KERNEL))) + return -ENOMEM; + + cam->usbdev = udev; + + if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) { + DBG(1, "kmalloc() failed"); + err = -ENOMEM; + goto fail; + } + + if (!(cam->v4ldev = video_device_alloc())) { + DBG(1, "video_device_alloc() failed"); + err = -ENOMEM; + goto fail; + } + + mutex_init(&cam->dev_mutex); + + r = sn9c102_read_reg(cam, 0x00); + if (r < 0 || r != 0x10) { + DBG(1, "Sorry, this is not a SN9C10x based camera " + "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct); + err = -ENODEV; + goto fail; + } + + cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ? + BRIDGE_SN9C103 : BRIDGE_SN9C102; + switch (cam->bridge) { + case BRIDGE_SN9C101: + case BRIDGE_SN9C102: + DBG(2, "SN9C10[12] PC Camera Controller detected " + "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct); + break; + case BRIDGE_SN9C103: + DBG(2, "SN9C103 PC Camera Controller detected " + "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct); + break; + } + + for (i = 0; sn9c102_sensor_table[i]; i++) { + err = sn9c102_sensor_table[i](cam); + if (!err) + break; + } + + if (!err) { + DBG(2, "%s image sensor detected", cam->sensor.name); + DBG(3, "Support for %s maintained by %s", + cam->sensor.name, cam->sensor.maintainer); + } else { + DBG(1, "No supported image sensor detected"); + err = -ENODEV; + goto fail; + } + + if (sn9c102_init(cam)) { + DBG(1, "Initialization failed. I will retry on open()."); + cam->state |= DEV_MISCONFIGURED; + } + + strcpy(cam->v4ldev->name, "SN9C10x PC Camera"); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = 0; + cam->v4ldev->fops = &sn9c102_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + + mutex_lock(&cam->dev_mutex); + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L2 device registration failed"); + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(1, "Free /dev/videoX node not found"); + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0; + mutex_unlock(&cam->dev_mutex); + goto fail; + } + + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + + cam->module_param.force_munmap = force_munmap[dev_nr]; + cam->module_param.frame_timeout = frame_timeout[dev_nr]; + + dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + sn9c102_create_sysfs(cam); + DBG(2, "Optional device control through 'sysfs' interface ready"); +#endif + + usb_set_intfdata(intf, cam); + + mutex_unlock(&cam->dev_mutex); + + return 0; + +fail: + if (cam) { + kfree(cam->control_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + kfree(cam); + } + return err; +} + + +static void sn9c102_usb_disconnect(struct usb_interface* intf) +{ + struct sn9c102_device* cam = usb_get_intfdata(intf); + + if (!cam) + return; + + down_write(&sn9c102_disconnect); + + mutex_lock(&cam->dev_mutex); + + DBG(2, "Disconnecting %s...", cam->v4ldev->name); + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "Device /dev/video%d is open! Deregistration and " + "memory deallocation are deferred on close.", + cam->v4ldev->minor); + cam->state |= DEV_MISCONFIGURED; + sn9c102_stop_transfer(cam); + cam->state |= DEV_DISCONNECTED; + wake_up_interruptible(&cam->wait_frame); + wake_up(&cam->wait_stream); + usb_get_dev(cam->usbdev); + } else { + cam->state |= DEV_DISCONNECTED; + sn9c102_release_resources(cam); + } + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + + up_write(&sn9c102_disconnect); +} + + +static struct usb_driver sn9c102_usb_driver = { + .name = "sn9c102", + .id_table = sn9c102_id_table, + .probe = sn9c102_usb_probe, + .disconnect = sn9c102_usb_disconnect, +}; + +/*****************************************************************************/ + +static int __init sn9c102_module_init(void) +{ + int err = 0; + + KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION); + KDBG(3, SN9C102_MODULE_AUTHOR); + + if ((err = usb_register(&sn9c102_usb_driver))) + KDBG(1, "usb_register() failed"); + + return err; +} + + +static void __exit sn9c102_module_exit(void) +{ + usb_deregister(&sn9c102_usb_driver); +} + + +module_init(sn9c102_module_init); +module_exit(sn9c102_module_exit); diff --git a/drivers/media/video/sn9c102/sn9c102_hv7131d.c b/drivers/media/video/sn9c102/sn9c102_hv7131d.c new file mode 100644 index 000000000000..c4117bf64b69 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_hv7131d.c @@ -0,0 +1,271 @@ +/*************************************************************************** + * Plug-in for HV7131D image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor hv7131d; + + +static int hv7131d_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x0e, 0x18); + err += sn9c102_write_reg(cam, 0xf2, 0x19); + + err += sn9c102_i2c_write(cam, 0x01, 0x04); + err += sn9c102_i2c_write(cam, 0x02, 0x00); + err += sn9c102_i2c_write(cam, 0x28, 0x00); + + return err; +} + + +static int hv7131d_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = sn9c102_i2c_read(cam, 0x26), + r2 = sn9c102_i2c_read(cam, 0x27); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 8) | (r2 & 0xff); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x31)) < 0) + return -EIO; + ctrl->value = 0x3f - (ctrl->value & 0x3f); + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x33)) < 0) + return -EIO; + ctrl->value = 0x3f - (ctrl->value & 0x3f); + return 0; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x32)) < 0) + return -EIO; + ctrl->value = 0x3f - (ctrl->value & 0x3f); + return 0; + case SN9C102_V4L2_CID_RESET_LEVEL: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x30)) < 0) + return -EIO; + ctrl->value &= 0x3f; + return 0; + case SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x34)) < 0) + return -EIO; + ctrl->value &= 0x07; + return 0; + default: + return -EINVAL; + } +} + + +static int hv7131d_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x26, ctrl->value >> 8); + err += sn9c102_i2c_write(cam, 0x27, ctrl->value & 0xff); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x31, 0x3f - ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x33, 0x3f - ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x32, 0x3f - ctrl->value); + break; + case SN9C102_V4L2_CID_RESET_LEVEL: + err += sn9c102_i2c_write(cam, 0x30, ctrl->value); + break; + case SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE: + err += sn9c102_i2c_write(cam, 0x34, ctrl->value); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int hv7131d_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &hv7131d; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 2, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int hv7131d_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x42, 0x19); + else + err += sn9c102_write_reg(cam, 0xf2, 0x19); + + return err; +} + + +static struct sn9c102_sensor hv7131d = { + .name = "HV7131D", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x11, + .init = &hv7131d_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x0250, + .maximum = 0xffff, + .step = 0x0001, + .default_value = 0x0250, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x1e, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_RESET_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "reset level", + .minimum = 0x19, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x30, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "pixel bias voltage", + .minimum = 0x00, + .maximum = 0x07, + .step = 0x01, + .default_value = 0x02, + .flags = 0, + }, + }, + .get_ctrl = &hv7131d_get_ctrl, + .set_ctrl = &hv7131d_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &hv7131d_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &hv7131d_set_pix_format +}; + + +int sn9c102_probe_hv7131d(struct sn9c102_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + r0 = sn9c102_i2c_try_read(cam, &hv7131d, 0x00); + r1 = sn9c102_i2c_try_read(cam, &hv7131d, 0x01); + if (r0 < 0 || r1 < 0) + return -EIO; + + if (r0 != 0x00 && r1 != 0x04) + return -ENODEV; + + sn9c102_attach_sensor(cam, &hv7131d); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_mi0343.c b/drivers/media/video/sn9c102/sn9c102_mi0343.c new file mode 100644 index 000000000000..4169ea4a2e20 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_mi0343.c @@ -0,0 +1,363 @@ +/*************************************************************************** + * Plug-in for MI-0343 image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor mi0343; +static u8 mi0343_i2c_data[5+1]; + + +static int mi0343_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x0a, 0x14); + err += sn9c102_write_reg(cam, 0x40, 0x01); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x07, 0x18); + err += sn9c102_write_reg(cam, 0xa0, 0x19); + + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x0d, 0x00, 0x01, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x0d, 0x00, 0x00, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x03, 0x01, 0xe1, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x04, 0x02, 0x81, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x05, 0x00, 0x17, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x06, 0x00, 0x11, 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id, + 0x62, 0x04, 0x9a, 0, 0); + + return err; +} + + +static int mi0343_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x09, 2+1, mi0343_i2c_data) < 0) + return -EIO; + ctrl->value = mi0343_i2c_data[2]; + return 0; + case V4L2_CID_GAIN: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x35, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + case V4L2_CID_HFLIP: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x20, 2+1, mi0343_i2c_data) < 0) + return -EIO; + ctrl->value = mi0343_i2c_data[3] & 0x20 ? 1 : 0; + return 0; + case V4L2_CID_VFLIP: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x20, 2+1, mi0343_i2c_data) < 0) + return -EIO; + ctrl->value = mi0343_i2c_data[3] & 0x80 ? 1 : 0; + return 0; + case V4L2_CID_RED_BALANCE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x2d, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + case V4L2_CID_BLUE_BALANCE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x2c, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, + 0x2e, 2+1, mi0343_i2c_data) < 0) + return -EIO; + break; + default: + return -EINVAL; + } + + switch (ctrl->id) { + case V4L2_CID_GAIN: + case V4L2_CID_RED_BALANCE: + case V4L2_CID_BLUE_BALANCE: + case SN9C102_V4L2_CID_GREEN_BALANCE: + ctrl->value = mi0343_i2c_data[3] | (mi0343_i2c_data[2] << 8); + if (ctrl->value >= 0x10 && ctrl->value <= 0x3f) + ctrl->value -= 0x10; + else if (ctrl->value >= 0x60 && ctrl->value <= 0x7f) + ctrl->value -= 0x60; + else if (ctrl->value >= 0xe0 && ctrl->value <= 0xff) + ctrl->value -= 0xe0; + } + + return 0; +} + + +static int mi0343_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + u16 reg = 0; + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + case V4L2_CID_RED_BALANCE: + case V4L2_CID_BLUE_BALANCE: + case SN9C102_V4L2_CID_GREEN_BALANCE: + if (ctrl->value <= (0x3f-0x10)) + reg = 0x10 + ctrl->value; + else if (ctrl->value <= ((0x3f-0x10) + (0x7f-0x60))) + reg = 0x60 + (ctrl->value - (0x3f-0x10)); + else + reg = 0xe0 + (ctrl->value - (0x3f-0x10) - (0x7f-0x60)); + break; + } + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x09, ctrl->value, 0x00, + 0, 0); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x35, reg >> 8, reg & 0xff, + 0, 0); + break; + case V4L2_CID_HFLIP: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x20, ctrl->value ? 0x40:0x00, + ctrl->value ? 0x20:0x00, + 0, 0); + break; + case V4L2_CID_VFLIP: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x20, ctrl->value ? 0x80:0x00, + ctrl->value ? 0x80:0x00, + 0, 0); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2d, reg >> 8, reg & 0xff, + 0, 0); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2c, reg >> 8, reg & 0xff, + 0, 0); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2b, reg >> 8, reg & 0xff, + 0, 0); + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x2e, reg >> 8, reg & 0xff, + 0, 0); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int mi0343_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &mi0343; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 0, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 2; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int mi0343_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) { + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x0a, 0x00, 0x03, 0, 0); + err += sn9c102_write_reg(cam, 0x20, 0x19); + } else { + err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, + mi0343.i2c_slave_id, + 0x0a, 0x00, 0x05, 0, 0); + err += sn9c102_write_reg(cam, 0xa0, 0x19); + } + + return err; +} + + +static struct sn9c102_sensor mi0343 = { + .name = "MI-0343", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x5d, + .init = &mi0343_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x06, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0),/*0x6d*/ + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal mirror", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical mirror", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0), + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = (0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0), + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = ((0x3f-0x10)+(0x7f-0x60)+(0xff-0xe0)), + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + }, + .get_ctrl = &mi0343_get_ctrl, + .set_ctrl = &mi0343_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &mi0343_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &mi0343_set_pix_format +}; + + +int sn9c102_probe_mi0343(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, 0x00, + 2, mi0343_i2c_data) < 0) + return -EIO; + + if (mi0343_i2c_data[4] != 0x32 && mi0343_i2c_data[3] != 0xe3) + return -ENODEV; + + sn9c102_attach_sensor(cam, &mi0343); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_ov7630.c b/drivers/media/video/sn9c102/sn9c102_ov7630.c new file mode 100644 index 000000000000..3da042021787 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_ov7630.c @@ -0,0 +1,401 @@ +/*************************************************************************** + * Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2005-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor ov7630; + + +static int ov7630_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x0f, 0x18); + err += sn9c102_write_reg(cam, 0x50, 0x19); + + err += sn9c102_i2c_write(cam, 0x12, 0x80); + err += sn9c102_i2c_write(cam, 0x11, 0x01); + err += sn9c102_i2c_write(cam, 0x15, 0x34); + err += sn9c102_i2c_write(cam, 0x16, 0x03); + err += sn9c102_i2c_write(cam, 0x17, 0x1c); + err += sn9c102_i2c_write(cam, 0x18, 0xbd); + err += sn9c102_i2c_write(cam, 0x19, 0x06); + err += sn9c102_i2c_write(cam, 0x1a, 0xf6); + err += sn9c102_i2c_write(cam, 0x1b, 0x04); + err += sn9c102_i2c_write(cam, 0x20, 0xf6); + err += sn9c102_i2c_write(cam, 0x23, 0xee); + err += sn9c102_i2c_write(cam, 0x26, 0xa0); + err += sn9c102_i2c_write(cam, 0x27, 0x9a); + err += sn9c102_i2c_write(cam, 0x28, 0xa0); + err += sn9c102_i2c_write(cam, 0x29, 0x30); + err += sn9c102_i2c_write(cam, 0x2a, 0xa0); + err += sn9c102_i2c_write(cam, 0x2b, 0x1f); + err += sn9c102_i2c_write(cam, 0x2f, 0x3d); + err += sn9c102_i2c_write(cam, 0x30, 0x24); + err += sn9c102_i2c_write(cam, 0x32, 0x86); + err += sn9c102_i2c_write(cam, 0x60, 0xa9); + err += sn9c102_i2c_write(cam, 0x61, 0x42); + err += sn9c102_i2c_write(cam, 0x65, 0x00); + err += sn9c102_i2c_write(cam, 0x69, 0x38); + err += sn9c102_i2c_write(cam, 0x6f, 0x88); + err += sn9c102_i2c_write(cam, 0x70, 0x0b); + err += sn9c102_i2c_write(cam, 0x71, 0x00); + err += sn9c102_i2c_write(cam, 0x74, 0x21); + err += sn9c102_i2c_write(cam, 0x7d, 0xf7); + + return err; +} + + +static int ov7630_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x10, ctrl->value >> 2); + err += sn9c102_i2c_write(cam, 0x76, ctrl->value & 0x03); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x02, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x01, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x00, ctrl->value); + break; + case V4L2_CID_CONTRAST: + err += ctrl->value ? sn9c102_i2c_write(cam, 0x05, + (ctrl->value-1) | 0x20) + : sn9c102_i2c_write(cam, 0x05, 0x00); + break; + case V4L2_CID_BRIGHTNESS: + err += sn9c102_i2c_write(cam, 0x06, ctrl->value); + break; + case V4L2_CID_SATURATION: + err += sn9c102_i2c_write(cam, 0x03, ctrl->value << 4); + break; + case V4L2_CID_HUE: + err += ctrl->value ? sn9c102_i2c_write(cam, 0x04, + (ctrl->value-1) | 0x20) + : sn9c102_i2c_write(cam, 0x04, 0x00); + break; + case V4L2_CID_DO_WHITE_BALANCE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + case V4L2_CID_WHITENESS: + err += sn9c102_i2c_write(cam, 0x0d, ctrl->value); + break; + case V4L2_CID_AUTO_WHITE_BALANCE: + err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x78); + break; + case V4L2_CID_AUTOGAIN: + err += sn9c102_i2c_write(cam, 0x13, ctrl->value); + break; + case V4L2_CID_VFLIP: + err += sn9c102_i2c_write(cam, 0x75, 0x0e | (ctrl->value << 7)); + break; + case V4L2_CID_BLACK_LEVEL: + err += sn9c102_i2c_write(cam, 0x25, ctrl->value); + break; + case SN9C102_V4L2_CID_BRIGHT_LEVEL: + err += sn9c102_i2c_write(cam, 0x24, ctrl->value); + break; + case SN9C102_V4L2_CID_GAMMA: + err += sn9c102_i2c_write(cam, 0x14, (ctrl->value << 2) | 0x80); + break; + case SN9C102_V4L2_CID_BAND_FILTER: + err += sn9c102_i2c_write(cam, 0x2d, ctrl->value << 2); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int ov7630_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &ov7630; + int err = 0; + u8 v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1; + + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int ov7630_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x20, 0x19); + else + err += sn9c102_write_reg(cam, 0x50, 0x19); + + return err; +} + + +static struct sn9c102_sensor ov7630 = { + .name = "OV7630", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x21, + .init = &ov7630_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x14, + .flags = 0, + }, + { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "hue", + .minimum = 0x00, + .maximum = 0x1f+1, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "saturation", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x08, + .flags = 0, + }, + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "contrast", + .minimum = 0x00, + .maximum = 0x1f+1, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x000, + .maximum = 0x3ff, + .step = 0x001, + .default_value = 0x83<<2, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x3a, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x77, + .flags = 0, + }, + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0xa0, + .flags = 0, + }, + { + .id = V4L2_CID_DO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "white balance background: blue", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = V4L2_CID_WHITENESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "white balance background: red", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto white balance", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain & exposure mode", + .minimum = 0x00, + .maximum = 0x03, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_BLACK_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "black pixel ratio", + .minimum = 0x01, + .maximum = 0x9a, + .step = 0x01, + .default_value = 0x8a, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_BRIGHT_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "bright pixel ratio", + .minimum = 0x01, + .maximum = 0x9a, + .step = 0x01, + .default_value = 0x10, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_BAND_FILTER, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "band filter", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GAMMA, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "rgb gamma", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + }, + .set_ctrl = &ov7630_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &ov7630_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &ov7630_set_pix_format +}; + + +int sn9c102_probe_ov7630(struct sn9c102_device* cam) +{ + const struct usb_device_id ov7630_id_table[] = { + { USB_DEVICE(0x0c45, 0x602c), }, + { USB_DEVICE(0x0c45, 0x602d), }, + { USB_DEVICE(0x0c45, 0x608f), }, + { USB_DEVICE(0x0c45, 0x60b0), }, + { } + }; + int err = 0; + + if (!sn9c102_match_id(cam, ov7630_id_table)) + return -ENODEV; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + err += sn9c102_i2c_try_write(cam, &ov7630, 0x0b, 0); + if (err) + return -ENODEV; + + sn9c102_attach_sensor(cam, &ov7630); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_pas106b.c b/drivers/media/video/sn9c102/sn9c102_pas106b.c new file mode 100644 index 000000000000..9915944235e8 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_pas106b.c @@ -0,0 +1,307 @@ +/*************************************************************************** + * Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/delay.h> +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor pas106b; + + +static int pas106b_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x20, 0x19); + err += sn9c102_write_reg(cam, 0x09, 0x18); + + err += sn9c102_i2c_write(cam, 0x02, 0x0c); + err += sn9c102_i2c_write(cam, 0x05, 0x5a); + err += sn9c102_i2c_write(cam, 0x06, 0x88); + err += sn9c102_i2c_write(cam, 0x07, 0x80); + err += sn9c102_i2c_write(cam, 0x10, 0x06); + err += sn9c102_i2c_write(cam, 0x11, 0x06); + err += sn9c102_i2c_write(cam, 0x12, 0x00); + err += sn9c102_i2c_write(cam, 0x14, 0x02); + err += sn9c102_i2c_write(cam, 0x13, 0x01); + + msleep(400); + + return err; +} + + +static int pas106b_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = sn9c102_i2c_read(cam, 0x03), + r2 = sn9c102_i2c_read(cam, 0x04); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 4) | (r2 & 0x0f); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x09)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case V4L2_CID_GAIN: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0e)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case V4L2_CID_CONTRAST: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0f)) < 0) + return -EIO; + ctrl->value &= 0x07; + return 0; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0a)) < 0) + return -EIO; + ctrl->value = (ctrl->value & 0x1f) << 1; + return 0; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x08)) < 0) + return -EIO; + ctrl->value &= 0xf8; + return 0; + default: + return -EINVAL; + } +} + + +static int pas106b_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x03, ctrl->value >> 4); + err += sn9c102_i2c_write(cam, 0x04, ctrl->value & 0x0f); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x0e, ctrl->value); + break; + case V4L2_CID_CONTRAST: + err += sn9c102_i2c_write(cam, 0x0f, ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x0a, ctrl->value >> 1); + err += sn9c102_i2c_write(cam, 0x0b, ctrl->value >> 1); + break; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + err += sn9c102_i2c_write(cam, 0x08, ctrl->value << 3); + break; + default: + return -EINVAL; + } + err += sn9c102_i2c_write(cam, 0x13, 0x01); + + return err ? -EIO : 0; +} + + +static int pas106b_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &pas106b; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int pas106b_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x2c, 0x17); + else + err += sn9c102_write_reg(cam, 0x20, 0x17); + + return err; +} + + +static struct sn9c102_sensor pas106b = { + .name = "PAS106B", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x40, + .init = &pas106b_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x125, + .maximum = 0xfff, + .step = 0x001, + .default_value = 0x140, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0d, + .flags = 0, + }, + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "contrast", + .minimum = 0x00, + .maximum = 0x07, + .step = 0x01, + .default_value = 0x00, /* 0x00~0x03 have same effect */ + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x04, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x06, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x3e, + .step = 0x02, + .default_value = 0x02, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + }, + .get_ctrl = &pas106b_get_ctrl, + .set_ctrl = &pas106b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + }, + .set_crop = &pas106b_set_crop, + .pix_format = { + .width = 352, + .height = 288, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, /* we use this field as 'bits per pixel' */ + }, + .set_pix_format = &pas106b_set_pix_format +}; + + +int sn9c102_probe_pas106b(struct sn9c102_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + unsigned int pid = 0; + + /* + Minimal initialization to enable the I2C communication + NOTE: do NOT change the values! + */ + err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */ + err += sn9c102_write_reg(cam, 0x00, 0x01); /* sensor power on */ + err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */ + if (err) + return -EIO; + + r0 = sn9c102_i2c_try_read(cam, &pas106b, 0x00); + r1 = sn9c102_i2c_try_read(cam, &pas106b, 0x01); + + if (r0 < 0 || r1 < 0) + return -EIO; + + pid = (r0 << 11) | ((r1 & 0xf0) >> 4); + if (pid != 0x007) + return -ENODEV; + + sn9c102_attach_sensor(cam, &pas106b); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bca.c b/drivers/media/video/sn9c102/sn9c102_pas202bca.c new file mode 100644 index 000000000000..c8f1ae2152b8 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_pas202bca.c @@ -0,0 +1,238 @@ +/*************************************************************************** + * Plug-in for PAS202BCA image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/delay.h> +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor pas202bca; + + +static int pas202bca_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x30, 0x19); + err += sn9c102_write_reg(cam, 0x09, 0x18); + + err += sn9c102_i2c_write(cam, 0x02, 0x14); + err += sn9c102_i2c_write(cam, 0x03, 0x40); + err += sn9c102_i2c_write(cam, 0x0d, 0x2c); + err += sn9c102_i2c_write(cam, 0x0e, 0x01); + err += sn9c102_i2c_write(cam, 0x0f, 0xa9); + err += sn9c102_i2c_write(cam, 0x10, 0x08); + err += sn9c102_i2c_write(cam, 0x13, 0x63); + err += sn9c102_i2c_write(cam, 0x15, 0x70); + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + msleep(400); + + return err; +} + + +static int pas202bca_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x24, 0x17); + else + err += sn9c102_write_reg(cam, 0x20, 0x17); + + return err; +} + + +static int pas202bca_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6); + err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x07, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x10, ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x08, ctrl->value); + break; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + default: + return -EINVAL; + } + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + return err ? -EIO : 0; +} + + +static int pas202bca_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &pas202bca; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 3, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static struct sn9c102_sensor pas202bca = { + .name = "PAS202BCA", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x40, + .init = &pas202bca_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x01e5, + .maximum = 0x3fff, + .step = 0x0001, + .default_value = 0x01e5, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0c, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x05, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x04, + .flags = 0, + }, + }, + .set_ctrl = &pas202bca_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &pas202bca_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &pas202bca_set_pix_format +}; + + +int sn9c102_probe_pas202bca(struct sn9c102_device* cam) +{ + const struct usb_device_id pas202bca_id_table[] = { + { USB_DEVICE(0x0c45, 0x60af), }, + { } + }; + int err = 0; + + if (!sn9c102_match_id(cam,pas202bca_id_table)) + return -ENODEV; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x40, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + if (err) + return -EIO; + + if (sn9c102_i2c_try_write(cam, &pas202bca, 0x10, 0)) /* try to write */ + return -ENODEV; + + sn9c102_attach_sensor(cam, &pas202bca); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c new file mode 100644 index 000000000000..e3c1178e339c --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c @@ -0,0 +1,293 @@ +/*************************************************************************** + * Plug-in for PAS202BCB image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio * + * <medaglia@undl.org.br> * + * http://cadu.homelinux.com:8080/ * + * * + * DAC Magnitude, exposure and green gain controls added by * + * Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/delay.h> +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor pas202bcb; + + +static int pas202bcb_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x30, 0x19); + err += sn9c102_write_reg(cam, 0x09, 0x18); + + err += sn9c102_i2c_write(cam, 0x02, 0x14); + err += sn9c102_i2c_write(cam, 0x03, 0x40); + err += sn9c102_i2c_write(cam, 0x0d, 0x2c); + err += sn9c102_i2c_write(cam, 0x0e, 0x01); + err += sn9c102_i2c_write(cam, 0x0f, 0xa9); + err += sn9c102_i2c_write(cam, 0x10, 0x08); + err += sn9c102_i2c_write(cam, 0x13, 0x63); + err += sn9c102_i2c_write(cam, 0x15, 0x70); + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + msleep(400); + + return err; +} + + +static int pas202bcb_get_ctrl(struct sn9c102_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = sn9c102_i2c_read(cam, 0x04), + r2 = sn9c102_i2c_read(cam, 0x05); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 6) | (r2 & 0x3f); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x09)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x07)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_GAIN: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x10)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case SN9C102_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x08)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + if ((ctrl->value = sn9c102_i2c_read(cam, 0x0c)) < 0) + return -EIO; + return 0; + default: + return -EINVAL; + } +} + + +static int pas202bcb_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x24, 0x17); + else + err += sn9c102_write_reg(cam, 0x20, 0x17); + + return err; +} + + +static int pas202bcb_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x04, ctrl->value >> 6); + err += sn9c102_i2c_write(cam, 0x05, ctrl->value & 0x3f); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x07, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x10, ctrl->value); + break; + case SN9C102_V4L2_CID_GREEN_BALANCE: + err += sn9c102_i2c_write(cam, 0x08, ctrl->value); + break; + case SN9C102_V4L2_CID_DAC_MAGNITUDE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + default: + return -EINVAL; + } + err += sn9c102_i2c_write(cam, 0x11, 0x01); + + return err ? -EIO : 0; +} + + +static int pas202bcb_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &pas202bcb; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 4, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 3; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static struct sn9c102_sensor pas202bcb = { + .name = "PAS202BCB", + .maintainer = "Carlos Eduardo Medaglia Dyonisio " + "<medaglia@undl.org.br>", + .sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x40, + .init = &pas202bcb_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x01e5, + .maximum = 0x3fff, + .step = 0x0001, + .default_value = 0x01e5, + .flags = 0, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0c, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x05, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x04, + .flags = 0, + }, + }, + .get_ctrl = &pas202bcb_get_ctrl, + .set_ctrl = &pas202bcb_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &pas202bcb_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &pas202bcb_set_pix_format +}; + + +int sn9c102_probe_pas202bcb(struct sn9c102_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + unsigned int pid = 0; + + /* + * Minimal initialization to enable the I2C communication + * NOTE: do NOT change the values! + */ + err += sn9c102_write_reg(cam, 0x01, 0x01); /* sensor power down */ + err += sn9c102_write_reg(cam, 0x40, 0x01); /* sensor power on */ + err += sn9c102_write_reg(cam, 0x28, 0x17); /* sensor clock at 24 MHz */ + if (err) + return -EIO; + + r0 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x00); + r1 = sn9c102_i2c_try_read(cam, &pas202bcb, 0x01); + + if (r0 < 0 || r1 < 0) + return -EIO; + + pid = (r0 << 4) | ((r1 & 0xf0) >> 4); + if (pid != 0x017) + return -ENODEV; + + sn9c102_attach_sensor(cam, &pas202bcb); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h new file mode 100644 index 000000000000..2a874ee6f9f5 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -0,0 +1,389 @@ +/*************************************************************************** + * API for image sensors connected to the SN9C10x PC Camera Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _SN9C102_SENSOR_H_ +#define _SN9C102_SENSOR_H_ + +#include <linux/usb.h> +#include <linux/videodev.h> +#include <linux/device.h> +#include <linux/stddef.h> +#include <linux/errno.h> +#include <asm/types.h> + +struct sn9c102_device; +struct sn9c102_sensor; + +/*****************************************************************************/ + +/* + OVERVIEW. + This is a small interface that allows you to add support for any CCD/CMOS + image sensors connected to the SN9C10X bridges. The entire API is documented + below. In the most general case, to support a sensor there are three steps + you have to follow: + 1) define the main "sn9c102_sensor" structure by setting the basic fields; + 2) write a probing function to be called by the core module when the USB + camera is recognized, then add both the USB ids and the name of that + function to the two corresponding tables SENSOR_TABLE and ID_TABLE (see + below); + 3) implement the methods that you want/need (and fill the rest of the main + structure accordingly). + "sn9c102_pas106b.c" is an example of all this stuff. Remember that you do + NOT need to touch the source code of the core module for the things to work + properly, unless you find bugs or flaws in it. Finally, do not forget to + read the V4L2 API for completeness. +*/ + +/*****************************************************************************/ + +/* + Probing functions: on success, you must attach the sensor to the camera + by calling sn9c102_attach_sensor() provided below. + To enable the I2C communication, you might need to perform a really basic + initialization of the SN9C10X chip by using the write function declared + ahead. + Functions must return 0 on success, the appropriate error otherwise. +*/ +extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam); +extern int sn9c102_probe_mi0343(struct sn9c102_device* cam); +extern int sn9c102_probe_ov7630(struct sn9c102_device* cam); +extern int sn9c102_probe_pas106b(struct sn9c102_device* cam); +extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam); +extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam); +extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam); +extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam); + +/* + Add the above entries to this table. Be sure to add the entry in the right + place, since, on failure, the next probing routine is called according to + the order of the list below, from top to bottom. +*/ +#define SN9C102_SENSOR_TABLE \ +static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { \ + &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \ + &sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */ \ + &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ \ + &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ \ + NULL, \ +}; + +/* Device identification */ +extern struct sn9c102_device* +sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id); + +/* Attach a probed sensor to the camera. */ +extern void +sn9c102_attach_sensor(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor); + +/* + Each SN9C10x camera has proper PID/VID identifiers. + SN9C103 supports multiple interfaces, but we only handle the video class + interface. +*/ +#define SN9C102_USB_DEVICE(vend, prod, intclass) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (intclass) + +#define SN9C102_ID_TABLE \ +static const struct usb_device_id sn9c102_id_table[] = { \ + { USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6007), }, \ + { USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x6024), }, \ + { USB_DEVICE(0x0c45, 0x6025), }, /* TAS5130D1B and TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6028), }, /* PAS202BCB */ \ + { USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */ \ + { USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \ + { USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \ + { USB_DEVICE(0x0c45, 0x602d), }, \ + { USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */ \ + { USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), }, \ + { } \ +}; + +/*****************************************************************************/ + +/* + Read/write routines: they always return -1 on error, 0 or the read value + otherwise. NOTE that a real read operation is not supported by the SN9C10X + chip for some of its registers. To work around this problem, a pseudo-read + call is provided instead: it returns the last successfully written value + on the register (0 if it has never been written), the usual -1 on error. +*/ + +/* The "try" I2C I/O versions are used when probing the sensor */ +extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*, + u8 address, u8 value); +extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*, + u8 address); + +/* + These must be used if and only if the sensor doesn't implement the standard + I2C protocol. There are a number of good reasons why you must use the + single-byte versions of these functions: do not abuse. The first function + writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X + chip. The second one programs the registers 0x09 and 0x10 with data0 and + data1, and places the n bytes read from the sensor register table in the + buffer pointed by 'buffer'. Both the functions return -1 on error; the write + version returns 0 on success, while the read version returns the first read + byte. +*/ +extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 n, + u8 data0, u8 data1, u8 data2, u8 data3, + u8 data4, u8 data5); +extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 data0, + u8 data1, u8 n, u8 buffer[]); + +/* To be used after the sensor struct has been attached to the camera struct */ +extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value); +extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address); + +/* I/O on registers in the bridge. Could be used by the sensor methods too */ +extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index); +extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index); +extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index); + +/* + NOTE: there are no exported debugging functions. To uniform the output you + must use the dev_info()/dev_warn()/dev_err() macros defined in device.h, + already included here, the argument being the struct device '&usbdev->dev' + of the sensor structure. Do NOT use these macros before the sensor is + attached or the kernel will crash! However, you should not need to notify + the user about common errors or other messages, since this is done by the + master module. +*/ + +/*****************************************************************************/ + +enum sn9c102_i2c_sysfs_ops { + SN9C102_I2C_READ = 0x01, + SN9C102_I2C_WRITE = 0x02, +}; + +enum sn9c102_i2c_frequency { /* sensors may support both the frequencies */ + SN9C102_I2C_100KHZ = 0x01, + SN9C102_I2C_400KHZ = 0x02, +}; + +enum sn9c102_i2c_interface { + SN9C102_I2C_2WIRES, + SN9C102_I2C_3WIRES, +}; + +#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 + +struct sn9c102_sensor { + char name[32], /* sensor name */ + maintainer[64]; /* name of the mantainer <email> */ + + /* Supported operations through the 'sysfs' interface */ + enum sn9c102_i2c_sysfs_ops sysfs_ops; + + /* + These sensor capabilities must be provided if the SN9C10X controller + needs to communicate through the sensor serial interface by using + at least one of the i2c functions available. + */ + enum sn9c102_i2c_frequency frequency; + enum sn9c102_i2c_interface interface; + + /* + This identifier must be provided if the image sensor implements + the standard I2C protocol. + */ + u8 i2c_slave_id; /* reg. 0x09 */ + + /* + NOTE: Where not noted,most of the functions below are not mandatory. + Set to null if you do not implement them. If implemented, + they must return 0 on success, the proper error otherwise. + */ + + int (*init)(struct sn9c102_device* cam); + /* + This function will be called after the sensor has been attached. + It should be used to initialize the sensor only, but may also + configure part of the SN9C10X chip if necessary. You don't need to + setup picture settings like brightness, contrast, etc.. here, if + the corrisponding controls are implemented (see below), since + they are adjusted in the core driver by calling the set_ctrl() + method after init(), where the arguments are the default values + specified in the v4l2_queryctrl list of supported controls; + Same suggestions apply for other settings, _if_ the corresponding + methods are present; if not, the initialization must configure the + sensor according to the default configuration structures below. + */ + + struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS]; + /* + Optional list of default controls, defined as indicated in the + V4L2 API. Menu type controls are not handled by this interface. + */ + + int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl); + int (*set_ctrl)(struct sn9c102_device* cam, + const struct v4l2_control* ctrl); + /* + You must implement at least the set_ctrl method if you have defined + the list above. The returned value must follow the V4L2 + specifications for the VIDIOC_G|C_CTRL ioctls. V4L2_CID_H|VCENTER + are not supported by this driver, so do not implement them. Also, + you don't have to check whether the passed values are out of bounds, + given that this is done by the core module. + */ + + struct v4l2_cropcap cropcap; + /* + Think the image sensor as a grid of R,G,B monochromatic pixels + disposed according to a particular Bayer pattern, which describes + the complete array of pixels, from (0,0) to (xmax, ymax). We will + use this coordinate system from now on. It is assumed the sensor + chip can be programmed to capture/transmit a subsection of that + array of pixels: we will call this subsection "active window". + It is not always true that the largest achievable active window can + cover the whole array of pixels. The V4L2 API defines another + area called "source rectangle", which, in turn, is a subrectangle of + the active window. The SN9C10X chip is always programmed to read the + source rectangle. + The bounds of both the active window and the source rectangle are + specified in the cropcap substructures 'bounds' and 'defrect'. + By default, the source rectangle should cover the largest possible + area. Again, it is not always true that the largest source rectangle + can cover the entire active window, although it is a rare case for + the hardware we have. The bounds of the source rectangle _must_ be + multiple of 16 and must use the same coordinate system as indicated + before; their centers shall align initially. + If necessary, the sensor chip must be initialized during init() to + set the bounds of the active sensor window; however, by default, it + usually covers the largest achievable area (maxwidth x maxheight) + of pixels, so no particular initialization is needed, if you have + defined the correct default bounds in the structures. + See the V4L2 API for further details. + NOTE: once you have defined the bounds of the active window + (struct cropcap.bounds) you must not change them.anymore. + Only 'bounds' and 'defrect' fields are mandatory, other fields + will be ignored. + */ + + int (*set_crop)(struct sn9c102_device* cam, + const struct v4l2_rect* rect); + /* + To be called on VIDIOC_C_SETCROP. The core module always calls a + default routine which configures the appropriate SN9C10X regs (also + scaling), but you may need to override/adjust specific stuff. + 'rect' contains width and height values that are multiple of 16: in + case you override the default function, you always have to program + the chip to match those values; on error return the corresponding + error code without rolling back. + NOTE: in case, you must program the SN9C10X chip to get rid of + blank pixels or blank lines at the _start_ of each line or + frame after each HSYNC or VSYNC, so that the image starts with + real RGB data (see regs 0x12, 0x13) (having set H_SIZE and, + V_SIZE you don't have to care about blank pixels or blank + lines at the end of each line or frame). + */ + + struct v4l2_pix_format pix_format; + /* + What you have to define here are: 1) initial 'width' and 'height' of + the target rectangle 2) the initial 'pixelformat', which can be + either V4L2_PIX_FMT_SN9C10X (for compressed video) or + V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate the + number of bits per pixel for uncompressed video, 8 or 9 (despite the + current value of 'pixelformat'). + NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4 + of cropcap.defrect.width and cropcap.defrect.height. I + suggest 1/1. + NOTE 2: The initial compression quality is defined by the first bit + of reg 0x17 during the initialization of the image sensor. + NOTE 3: as said above, you have to program the SN9C10X chip to get + rid of any blank pixels, so that the output of the sensor + matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR). + */ + + int (*set_pix_format)(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix); + /* + To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to + SN9C10X pixel format or viceversa. On error return the corresponding + error code without rolling back. + */ + + /* + Do NOT write to the data below, it's READ ONLY. It is used by the + core module to store successfully updated values of the above + settings, for rollbacks..etc..in case of errors during atomic I/O + */ + struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS]; + struct v4l2_rect _rect; +}; + +/*****************************************************************************/ + +/* Private ioctl's for control settings supported by some image sensors */ +#define SN9C102_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE +#define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1 +#define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2 +#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3 +#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4 +#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5 +#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6 + +#endif /* _SN9C102_SENSOR_H_ */ diff --git a/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c new file mode 100644 index 000000000000..294eb02fbd88 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_tas5110c1b.c @@ -0,0 +1,159 @@ +/*************************************************************************** + * Plug-in for TAS5110C1B image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor tas5110c1b; + + +static int tas5110c1b_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x44, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x0a, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x06, 0x18); + err += sn9c102_write_reg(cam, 0xfb, 0x19); + + err += sn9c102_i2c_write(cam, 0xc0, 0x80); + + return err; +} + + +static int tas5110c1b_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int tas5110c1b_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &tas5110c1b; + int err = 0; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 69, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 9; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + /* Don't change ! */ + err += sn9c102_write_reg(cam, 0x14, 0x1a); + err += sn9c102_write_reg(cam, 0x0a, 0x1b); + err += sn9c102_write_reg(cam, sn9c102_pread_reg(cam, 0x19), 0x19); + + return err; +} + + +static int tas5110c1b_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x2b, 0x19); + else + err += sn9c102_write_reg(cam, 0xfb, 0x19); + + return err; +} + + +static struct sn9c102_sensor tas5110c1b = { + .name = "TAS5110C1B", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_3WIRES, + .init = &tas5110c1b_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0xf6, + .step = 0x01, + .default_value = 0x40, + .flags = 0, + }, + }, + .set_ctrl = &tas5110c1b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 352, + .height = 288, + }, + }, + .set_crop = &tas5110c1b_set_crop, + .pix_format = { + .width = 352, + .height = 288, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &tas5110c1b_set_pix_format +}; + + +int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam) +{ + const struct usb_device_id tas5110c1b_id_table[] = { + { USB_DEVICE(0x0c45, 0x6001), }, + { USB_DEVICE(0x0c45, 0x6005), }, + { USB_DEVICE(0x0c45, 0x60ab), }, + { } + }; + + /* Sensor detection is based on USB pid/vid */ + if (!sn9c102_match_id(cam, tas5110c1b_id_table)) + return -ENODEV; + + sn9c102_attach_sensor(cam, &tas5110c1b); + + return 0; +} diff --git a/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c new file mode 100644 index 000000000000..9ecb09032b68 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_tas5130d1b.c @@ -0,0 +1,169 @@ +/*************************************************************************** + * Plug-in for TAS5130D1B image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor tas5130d1b; + + +static int tas5130d1b_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x20, 0x17); + err += sn9c102_write_reg(cam, 0x04, 0x01); + err += sn9c102_write_reg(cam, 0x01, 0x10); + err += sn9c102_write_reg(cam, 0x00, 0x11); + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x07, 0x18); + + return err; +} + + +static int tas5130d1b_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value); + break; + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x40, 0x47 - ctrl->value); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int tas5130d1b_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &tas5130d1b; + u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 104, + v_start = (u8)(rect->top - s->cropcap.bounds.top) + 12; + int err = 0; + + err += sn9c102_write_reg(cam, h_start, 0x12); + err += sn9c102_write_reg(cam, v_start, 0x13); + + /* Do NOT change! */ + err += sn9c102_write_reg(cam, 0x1f, 0x1a); + err += sn9c102_write_reg(cam, 0x1a, 0x1b); + err += sn9c102_write_reg(cam, sn9c102_pread_reg(cam, 0x19), 0x19); + + return err; +} + + +static int tas5130d1b_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x63, 0x19); + else + err += sn9c102_write_reg(cam, 0xf3, 0x19); + + return err; +} + + +static struct sn9c102_sensor tas5130d1b = { + .name = "TAS5130D1B", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_3WIRES, + .init = &tas5130d1b_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0xf6, + .step = 0x02, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x00, + .maximum = 0x47, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + }, + .set_ctrl = &tas5130d1b_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &tas5130d1b_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &tas5130d1b_set_pix_format +}; + + +int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam) +{ + const struct usb_device_id tas5130d1b_id_table[] = { + { USB_DEVICE(0x0c45, 0x6025), }, + { USB_DEVICE(0x0c45, 0x60aa), }, + { } + }; + + /* Sensor detection is based on USB pid/vid */ + if (!sn9c102_match_id(cam, tas5130d1b_id_table)) + return -ENODEV; + + sn9c102_attach_sensor(cam, &tas5130d1b); + + return 0; +} diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c index 9d769264a329..07476c71174a 100644 --- a/drivers/media/video/stradis.c +++ b/drivers/media/video/stradis.c @@ -1,4 +1,4 @@ -/* +/* * stradis.c - stradis 4:2:2 mpeg decoder driver * * Stradis 4:2:2 MPEG-2 Decoder Driver @@ -1191,9 +1191,9 @@ static void saa7146_set_winsize(struct saa7146 *saa) } /* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area - * bitmap is fixed width, 128 bytes (1024 pixels represented) - * arranged most-sigificant-bit-left in 32-bit words - * based on saa7146 clipping hardware, it swaps bytes if LE + * bitmap is fixed width, 128 bytes (1024 pixels represented) + * arranged most-sigificant-bit-left in 32-bit words + * based on saa7146 clipping hardware, it swaps bytes if LE * much of this makes up for egcs brain damage -- so if you * are wondering "why did he do this?" it is because the C * was adjusted to generate the optimal asm output without @@ -1259,7 +1259,7 @@ static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr) clip_draw_rectangle(clipmap, cr[i].x, cr[i].y, cr[i].width, cr[i].height); } - /* clip against viewing window AND screen + /* clip against viewing window AND screen so we do not have to rely on the user program */ clip_draw_rectangle(clipmap, (saa->win.x + width > saa->win.swidth) ? diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c new file mode 100644 index 000000000000..b38bda83a7c5 --- /dev/null +++ b/drivers/media/video/stv680.c @@ -0,0 +1,1508 @@ +/* + * STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net) + * + * Thanks to STMicroelectronics for information on the usb commands, and + * to Steve Miller at STM for his help and encouragement while I was + * writing this driver. + * + * This driver is based heavily on the + * Endpoints (formerly known as AOX) se401 USB Camera Driver + * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) + * + * Still somewhat based on the Linux ov511 driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * History: + * ver 0.1 October, 2001. Initial attempt. + * + * ver 0.2 November, 2001. Fixed asbility to resize, added brightness + * function, made more stable (?) + * + * ver 0.21 Nov, 2001. Added gamma correction and white balance, + * due to Alexander Schwartz. Still trying to + * improve stablility. Moved stuff into stv680.h + * + * ver 0.22 Nov, 2001. Added sharpen function (by Michael Sweet, + * mike@easysw.com) from GIMP, also used in pencam. + * Simple, fast, good integer math routine. + * + * ver 0.23 Dec, 2001 (gkh) + * Took out sharpen function, ran code through + * Lindent, and did other minor tweaks to get + * things to work properly with 2.5.1 + * + * ver 0.24 Jan, 2002 (kjs) + * Fixed the problem with webcam crashing after + * two pictures. Changed the way pic is halved to + * improve quality. Got rid of green line around + * frame. Fix brightness reset when changing size + * bug. Adjusted gamma filters slightly. + * + * ver 0.25 Jan, 2002 (kjs) + * Fixed a bug in which the driver sometimes attempted + * to set to a non-supported size. This allowed + * gnomemeeting to work. + * Fixed proc entry removal bug. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/pagemap.h> +#include <linux/errno.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/mutex.h> + +#include "stv680.h" + +static int video_nr = -1; +static int swapRGB = 0; /* default for auto sleect */ +static int swapRGB_on = 0; /* default to allow auto select; -1=swap never, +1= swap always */ + +static unsigned int debug = 0; + +#define PDEBUG(level, fmt, args...) \ + do { \ + if (debug >= level) \ + info("[%s:%d] " fmt, __FUNCTION__, __LINE__ , ## args); \ + } while (0) + + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.25" +#define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>" +#define DRIVER_DESC "STV0680 USB Camera Driver" + +MODULE_AUTHOR (DRIVER_AUTHOR); +MODULE_DESCRIPTION (DRIVER_DESC); +MODULE_LICENSE ("GPL"); +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC (debug, "Debug enabled or not"); +module_param(swapRGB_on, int, 0); +MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never"); +module_param(video_nr, int, 0); + +/******************************************************************** + * + * Memory management + * + * This is a shameless copy from the USB-cpia driver (linux kernel + * version 2.3.29 or so, I have no idea what this code actually does ;). + * Actually it seems to be a copy of a shameless copy of the bttv-driver. + * Or that is a copy of a shameless copy of ... (To the powers: is there + * no generic kernel-function to do this sort of stuff?) + * + * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says + * there will be one, but apparentely not yet -jerdfelt + * + * So I copied it again for the ov511 driver -claudio + * + * Same for the se401 driver -Jeroen + * + * And the STV0680 driver - Kevin + ********************************************************************/ +static void *rvmalloc (unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32 (size); + if (!mem) + return NULL; + + memset (mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + return mem; +} + +static void rvfree (void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree (mem); +} + + +/********************************************************************* + * pencam read/write functions + ********************************************************************/ + +static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size) +{ + int ret = -1; + + switch (set) { + case 0: /* 0xc1 */ + ret = usb_control_msg (stv680->udev, + usb_rcvctrlpipe (stv680->udev, 0), + req, + (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + case 1: /* 0x41 */ + ret = usb_control_msg (stv680->udev, + usb_sndctrlpipe (stv680->udev, 0), + req, + (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + case 2: /* 0x80 */ + ret = usb_control_msg (stv680->udev, + usb_rcvctrlpipe (stv680->udev, 0), + req, + (USB_DIR_IN | USB_RECIP_DEVICE), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + case 3: /* 0x40 */ + ret = usb_control_msg (stv680->udev, + usb_sndctrlpipe (stv680->udev, 0), + req, + (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), + value, 0, buffer, size, PENCAM_TIMEOUT); + break; + + } + if ((ret < 0) && (req != 0x0a)) { + PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret); + } + return ret; +} + +static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate) +{ + + if (configuration != dev->udev->actconfig->desc.bConfigurationValue + || usb_reset_configuration (dev->udev) < 0) { + PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration); + return -1; + } + if (usb_set_interface (dev->udev, interface, alternate) < 0) { + PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate); + return -1; + } + return 0; +} + +static int stv_stop_video (struct usb_stv *dev) +{ + int i; + unsigned char *buf; + + buf = kmalloc (40, GFP_KERNEL); + if (buf == NULL) { + PDEBUG (0, "STV(e): Out of (small buf) memory"); + return -1; + } + + /* this is a high priority command; it stops all lower order commands */ + if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) { + i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02); /* Get Last Error; 2 = busy */ + PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buf[0], buf[1]); + } else { + PDEBUG (1, "STV(i): Camera reset to idle mode."); + } + + if ((i = stv_set_config (dev, 1, 0, 0)) < 0) + PDEBUG (1, "STV(e): Reset config during exit failed"); + + /* get current mode */ + buf[0] = 0xf0; + if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08) /* get mode */ + PDEBUG (0, "STV(e): Stop_video: problem setting original mode"); + if (dev->origMode != buf[0]) { + memset (buf, 0, 8); + buf[0] = (unsigned char) dev->origMode; + if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) { + PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed"); + i = -1; + } + buf[0] = 0xf0; + i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08); + if ((i != 0x08) || (buf[0] != dev->origMode)) { + PDEBUG (0, "STV(e): camera NOT set to original resolution."); + i = -1; + } else + PDEBUG (0, "STV(i): Camera set to original resolution"); + } + /* origMode */ + kfree(buf); + return i; +} + +static int stv_set_video_mode (struct usb_stv *dev) +{ + int i, stop_video = 1; + unsigned char *buf; + + buf = kmalloc (40, GFP_KERNEL); + if (buf == NULL) { + PDEBUG (0, "STV(e): Out of (small buf) memory"); + return -1; + } + + if ((i = stv_set_config (dev, 1, 0, 0)) < 0) { + kfree(buf); + return i; + } + + i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12); + if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) { + PDEBUG (1, "STV(e): Could not get descriptor 0100."); + goto error; + } + + /* set alternate interface 1 */ + if ((i = stv_set_config (dev, 1, 0, 1)) < 0) + goto error; + + if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10) + goto error; + PDEBUG (1, "STV(i): Setting video mode."); + /* Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240) */ + if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) { + stop_video = 0; + goto error; + } + goto exit; + +error: + kfree(buf); + if (stop_video == 1) + stv_stop_video (dev); + return -1; + +exit: + kfree(buf); + return 0; +} + +static int stv_init (struct usb_stv *stv680) +{ + int i = 0; + unsigned char *buffer; + unsigned long int bufsize; + + buffer = kzalloc (40, GFP_KERNEL); + if (buffer == NULL) { + PDEBUG (0, "STV(e): Out of (small buf) memory"); + return -1; + } + udelay (100); + + /* set config 1, interface 0, alternate 0 */ + if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) { + kfree(buffer); + PDEBUG (0, "STV(e): set config 1,0,0 failed"); + return -1; + } + /* ping camera to be sure STV0680 is present */ + if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02) + goto error; + if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) { + PDEBUG (1, "STV(e): camera ping failed!!"); + goto error; + } + + /* get camera descriptor */ + if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09) + goto error; + i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22); + if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) { + PDEBUG (1, "STV(e): Could not get descriptor 0200."); + goto error; + } + if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02) + goto error; + if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24) + goto error; + if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) + goto error; + + stv680->SupportedModes = buffer[7]; + i = stv680->SupportedModes; + stv680->CIF = 0; + stv680->VGA = 0; + stv680->QVGA = 0; + if (i & 1) + stv680->CIF = 1; + if (i & 2) + stv680->VGA = 1; + if (i & 8) + stv680->QVGA = 1; + if (stv680->SupportedModes == 0) { + PDEBUG (0, "STV(e): There are NO supported STV680 modes!!"); + i = -1; + goto error; + } else { + if (stv680->CIF) + PDEBUG (0, "STV(i): CIF is supported"); + if (stv680->QVGA) + PDEBUG (0, "STV(i): QVGA is supported"); + } + /* FW rev, ASIC rev, sensor ID */ + PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]); + PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]); + PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4)); + + /* set alternate interface 1 */ + if ((i = stv_set_config (stv680, 1, 0, 1)) < 0) + goto error; + + if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) + goto error; + if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08) + goto error; + i = buffer[3]; + PDEBUG (0, "STV(i): Camera has %i pictures.", i); + + /* get current mode */ + if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08) + goto error; + stv680->origMode = buffer[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */ + + /* This will attemp CIF mode, if supported. If not, set to QVGA */ + memset (buffer, 0, 8); + if (stv680->CIF) + buffer[0] = 0x00; + else if (stv680->QVGA) + buffer[0] = 0x03; + if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) { + PDEBUG (0, "STV(i): Set_Camera_Mode failed"); + i = -1; + goto error; + } + buffer[0] = 0xf0; + stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08); + if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) { + PDEBUG (0, "STV(e): Error setting camera video mode!"); + i = -1; + goto error; + } else { + if (buffer[0] == 0) { + stv680->VideoMode = 0x0000; + PDEBUG (0, "STV(i): Video Mode set to CIF"); + } + if (buffer[0] == 0x03) { + stv680->VideoMode = 0x0300; + PDEBUG (0, "STV(i): Video Mode set to QVGA"); + } + } + if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10) + goto error; + bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]); + stv680->cwidth = (buffer[4] << 8) | (buffer[5]); /* ->camera = 322, 356, 644 */ + stv680->cheight = (buffer[6] << 8) | (buffer[7]); /* ->camera = 242, 292, 484 */ + stv680->origGain = buffer[12]; + + goto exit; + +error: + i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02); /* Get Last Error */ + PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buffer[0], buffer[1]); + kfree(buffer); + return -1; + +exit: + kfree(buffer); + + /* video = 320x240, 352x288 */ + if (stv680->CIF == 1) { + stv680->maxwidth = 352; + stv680->maxheight = 288; + stv680->vwidth = 352; + stv680->vheight = 288; + } + if (stv680->QVGA == 1) { + stv680->maxwidth = 320; + stv680->maxheight = 240; + stv680->vwidth = 320; + stv680->vheight = 240; + } + + stv680->rawbufsize = bufsize; /* must be ./. by 8 */ + stv680->maxframesize = bufsize * 3; /* RGB size */ + PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight); + PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize); + + /* some default values */ + stv680->bulk_in_endpointAddr = 0x82; + stv680->dropped = 0; + stv680->error = 0; + stv680->framecount = 0; + stv680->readcount = 0; + stv680->streaming = 0; + /* bright, white, colour, hue, contrast are set by software, not in stv0680 */ + stv680->brightness = 32767; + stv680->chgbright = 0; + stv680->whiteness = 0; /* only for greyscale */ + stv680->colour = 32767; + stv680->contrast = 32767; + stv680->hue = 32767; + stv680->palette = STV_VIDEO_PALETTE; + stv680->depth = 24; /* rgb24 bits */ + if ((swapRGB_on == 0) && (swapRGB == 0)) + PDEBUG (1, "STV(i): swapRGB is (auto) OFF"); + else if ((swapRGB_on == 0) && (swapRGB == 1)) + PDEBUG (1, "STV(i): swapRGB is (auto) ON"); + else if (swapRGB_on == 1) + PDEBUG (1, "STV(i): swapRGB is (forced) ON"); + else if (swapRGB_on == -1) + PDEBUG (1, "STV(i): swapRGB is (forced) OFF"); + + if (stv_set_video_mode (stv680) < 0) { + PDEBUG (0, "STV(e): Could not set video mode in stv_init"); + return -1; + } + + return 0; +} + +/***************** last of pencam routines *******************/ + +/**************************************************************************** + * sysfs + ***************************************************************************/ +#define stv680_file(name, variable, field) \ +static ssize_t show_##name(struct class_device *class_dev, char *buf) \ +{ \ + struct video_device *vdev = to_video_device(class_dev); \ + struct usb_stv *stv = video_get_drvdata(vdev); \ + return sprintf(buf, field, stv->variable); \ +} \ +static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); + +stv680_file(model, camera_name, "%s\n"); +stv680_file(in_use, user, "%d\n"); +stv680_file(streaming, streaming, "%d\n"); +stv680_file(palette, palette, "%i\n"); +stv680_file(frames_total, readcount, "%d\n"); +stv680_file(frames_read, framecount, "%d\n"); +stv680_file(packets_dropped, dropped, "%d\n"); +stv680_file(decoding_errors, error, "%d\n"); + +static void stv680_create_sysfs_files(struct video_device *vdev) +{ + video_device_create_file(vdev, &class_device_attr_model); + video_device_create_file(vdev, &class_device_attr_in_use); + video_device_create_file(vdev, &class_device_attr_streaming); + video_device_create_file(vdev, &class_device_attr_palette); + video_device_create_file(vdev, &class_device_attr_frames_total); + video_device_create_file(vdev, &class_device_attr_frames_read); + video_device_create_file(vdev, &class_device_attr_packets_dropped); + video_device_create_file(vdev, &class_device_attr_decoding_errors); +} + +static void stv680_remove_sysfs_files(struct video_device *vdev) +{ + video_device_remove_file(vdev, &class_device_attr_model); + video_device_remove_file(vdev, &class_device_attr_in_use); + video_device_remove_file(vdev, &class_device_attr_streaming); + video_device_remove_file(vdev, &class_device_attr_palette); + video_device_remove_file(vdev, &class_device_attr_frames_total); + video_device_remove_file(vdev, &class_device_attr_frames_read); + video_device_remove_file(vdev, &class_device_attr_packets_dropped); + video_device_remove_file(vdev, &class_device_attr_decoding_errors); +} + +/******************************************************************** + * Camera control + *******************************************************************/ + +static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p) +{ + /* This sets values for v4l interface. max/min = 65535/0 */ + + p->brightness = stv680->brightness; + p->whiteness = stv680->whiteness; /* greyscale */ + p->colour = stv680->colour; + p->contrast = stv680->contrast; + p->hue = stv680->hue; + p->palette = stv680->palette; + p->depth = stv680->depth; + return 0; +} + +static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p) +{ + /* See above stv680_get_pict */ + + if (p->palette != STV_VIDEO_PALETTE) { + PDEBUG (2, "STV(e): Palette set error in _set_pic"); + return 1; + } + + if (stv680->brightness != p->brightness) { + stv680->chgbright = 1; + stv680->brightness = p->brightness; + } + + stv680->whiteness = p->whiteness; /* greyscale */ + stv680->colour = p->colour; + stv680->contrast = p->contrast; + stv680->hue = p->hue; + stv680->palette = p->palette; + stv680->depth = p->depth; + + return 0; +} + +static void stv680_video_irq (struct urb *urb, struct pt_regs *regs) +{ + struct usb_stv *stv680 = urb->context; + int length = urb->actual_length; + + if (length < stv680->rawbufsize) + PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length); + + /* ohoh... */ + if (!stv680->streaming) + return; + + if (!stv680->udev) { + PDEBUG (0, "STV(e): device vapourished in video_irq"); + return; + } + + /* 0 sized packets happen if we are to fast, but sometimes the camera + keeps sending them forever... + */ + if (length && !urb->status) { + stv680->nullpackets = 0; + switch (stv680->scratch[stv680->scratch_next].state) { + case BUFFER_READY: + case BUFFER_BUSY: + stv680->dropped++; + break; + + case BUFFER_UNUSED: + memcpy (stv680->scratch[stv680->scratch_next].data, + (unsigned char *) urb->transfer_buffer, length); + stv680->scratch[stv680->scratch_next].state = BUFFER_READY; + stv680->scratch[stv680->scratch_next].length = length; + if (waitqueue_active (&stv680->wq)) { + wake_up_interruptible (&stv680->wq); + } + stv680->scratch_overflow = 0; + stv680->scratch_next++; + if (stv680->scratch_next >= STV680_NUMSCRATCH) + stv680->scratch_next = 0; + break; + } /* switch */ + } else { + stv680->nullpackets++; + if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { + if (waitqueue_active (&stv680->wq)) { + wake_up_interruptible (&stv680->wq); + } + } + } /* if - else */ + + /* Resubmit urb for new data */ + urb->status = 0; + urb->dev = stv680->udev; + if (usb_submit_urb (urb, GFP_ATOMIC)) + PDEBUG (0, "STV(e): urb burned down in video irq"); + return; +} /* _video_irq */ + +static int stv680_start_stream (struct usb_stv *stv680) +{ + struct urb *urb; + int err = 0, i; + + stv680->streaming = 1; + + /* Do some memory allocation */ + for (i = 0; i < STV680_NUMFRAMES; i++) { + stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize; + stv680->frame[i].curpix = 0; + } + /* packet size = 4096 */ + for (i = 0; i < STV680_NUMSBUF; i++) { + stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); + if (stv680->sbuf[i].data == NULL) { + PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i); + return -1; + } + } + + stv680->scratch_next = 0; + stv680->scratch_use = 0; + stv680->scratch_overflow = 0; + for (i = 0; i < STV680_NUMSCRATCH; i++) { + stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); + if (stv680->scratch[i].data == NULL) { + PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i); + return -1; + } + stv680->scratch[i].state = BUFFER_UNUSED; + } + + for (i = 0; i < STV680_NUMSBUF; i++) { + urb = usb_alloc_urb (0, GFP_KERNEL); + if (!urb) + return -ENOMEM; + + /* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */ + usb_fill_bulk_urb (urb, stv680->udev, + usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr), + stv680->sbuf[i].data, stv680->rawbufsize, + stv680_video_irq, stv680); + stv680->urb[i] = urb; + err = usb_submit_urb (stv680->urb[i], GFP_KERNEL); + if (err) + PDEBUG (0, "STV(e): urb burned down in start stream"); + } /* i STV680_NUMSBUF */ + + stv680->framecount = 0; + return 0; +} + +static int stv680_stop_stream (struct usb_stv *stv680) +{ + int i; + + if (!stv680->streaming || !stv680->udev) + return 1; + + stv680->streaming = 0; + + for (i = 0; i < STV680_NUMSBUF; i++) + if (stv680->urb[i]) { + usb_kill_urb (stv680->urb[i]); + usb_free_urb (stv680->urb[i]); + stv680->urb[i] = NULL; + kfree(stv680->sbuf[i].data); + } + for (i = 0; i < STV680_NUMSCRATCH; i++) { + kfree(stv680->scratch[i].data); + stv680->scratch[i].data = NULL; + } + + return 0; +} + +static int stv680_set_size (struct usb_stv *stv680, int width, int height) +{ + int wasstreaming = stv680->streaming; + + /* Check to see if we need to change */ + if ((stv680->vwidth == width) && (stv680->vheight == height)) + return 0; + + PDEBUG (1, "STV(i): size request for %i x %i", width, height); + /* Check for a valid mode */ + if ((!width || !height) || ((width & 1) || (height & 1))) { + PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); + return 1; + } + + if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) { + width = stv680->maxwidth / 2; + height = stv680->maxheight / 2; + } else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) { + width = 160; + height = 120; + } else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) { + width = 176; + height = 144; + } else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) { + width = 320; + height = 240; + } else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) { + width = 352; + height = 288; + } else { + PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); + return 1; + } + + /* Stop a current stream and start it again at the new size */ + if (wasstreaming) + stv680_stop_stream (stv680); + stv680->vwidth = width; + stv680->vheight = height; + PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight); + if (wasstreaming) + stv680_start_stream (stv680); + + return 0; +} + +/********************************************************************** + * Video Decoding + **********************************************************************/ + +/******* routines from the pencam program; hey, they work! ********/ + +/* + * STV0680 Vision Camera Chipset Driver + * Copyright (C) 2000 Adam Harrison <adam@antispin.org> +*/ + +#define RED 0 +#define GREEN 1 +#define BLUE 2 +#define AD(x, y, w) (((y)*(w)+(x))*3) + +static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer) +{ + int x, y, i; + int w = stv680->cwidth; + int vw = stv680->cwidth, vh = stv680->cheight; + unsigned int p = 0; + int colour = 0, bayer = 0; + unsigned char *raw = buffer->data; + struct stv680_frame *frame = &stv680->frame[stv680->curframe]; + unsigned char *output = frame->data; + unsigned char *temp = frame->data; + int offset = buffer->offset; + + if (frame->curpix == 0) { + if (frame->grabstate == FRAME_READY) { + frame->grabstate = FRAME_GRABBING; + } + } + if (offset != frame->curpix) { /* Regard frame as lost :( */ + frame->curpix = 0; + stv680->error++; + return; + } + + if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) { + vw = 320; + vh = 240; + } + if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) { + vw = 352; + vh = 288; + } + + memset (output, 0, 3 * vw * vh); /* clear output matrix. */ + + for (y = 0; y < vh; y++) { + for (x = 0; x < vw; x++) { + if (x & 1) + p = *(raw + y * w + (x >> 1)); + else + p = *(raw + y * w + (x >> 1) + (w >> 1)); + + if (y & 1) + bayer = 2; + else + bayer = 0; + if (x & 1) + bayer++; + + switch (bayer) { + case 0: + case 3: + colour = 1; + break; + case 1: + colour = 0; + break; + case 2: + colour = 2; + break; + } + i = (y * vw + x) * 3; + *(output + i + colour) = (unsigned char) p; + } /* for x */ + + } /* for y */ + + /****** gamma correction plus hardcoded white balance */ + /* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code. + Correction values red[], green[], blue[], are generated by + (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255. + White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and + converted to unsigned char. Values are in stv680.h */ + + for (y = 0; y < vh; y++) { + for (x = 0; x < vw; x++) { + i = (y * vw + x) * 3; + *(output + i) = red[*(output + i)]; + *(output + i + 1) = green[*(output + i + 1)]; + *(output + i + 2) = blue[*(output + i + 2)]; + } + } + + /****** bayer demosaic ******/ + for (y = 1; y < (vh - 1); y++) { + for (x = 1; x < (vw - 1); x++) { /* work out pixel type */ + if (y & 1) + bayer = 0; + else + bayer = 2; + if (!(x & 1)) + bayer++; + + switch (bayer) { + case 0: /* green. blue lr, red tb */ + *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1; + *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1; + break; + + case 1: /* blue. green lrtb, red diagonals */ + *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; + *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2; + break; + + case 2: /* red. green lrtb, blue diagonals */ + *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; + *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2; + break; + + case 3: /* green. red lr, blue tb */ + *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1; + *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1; + break; + } /* switch */ + } /* for x */ + } /* for y - end demosaic */ + + /* fix top and bottom row, left and right side */ + i = vw * 3; + memcpy (output, (output + i), i); + memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i); + for (y = 0; y < vh; y++) { + i = y * vw * 3; + memcpy ((output + i), (output + i + 3), 3); + memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3); + } + + /* process all raw data, then trim to size if necessary */ + if ((stv680->vwidth == 160) || (stv680->vwidth == 176)) { + i = 0; + for (y = 0; y < vh; y++) { + if (!(y & 1)) { + for (x = 0; x < vw; x++) { + p = (y * vw + x) * 3; + if (!(x & 1)) { + *(output + i) = *(output + p); + *(output + i + 1) = *(output + p + 1); + *(output + i + 2) = *(output + p + 2); + i += 3; + } + } /* for x */ + } + } /* for y */ + } + /* reset to proper width */ + if ((stv680->vwidth == 160)) { + vw = 160; + vh = 120; + } + if ((stv680->vwidth == 176)) { + vw = 176; + vh = 144; + } + + /* output is RGB; some programs want BGR */ + /* swapRGB_on=0 -> program decides; swapRGB_on=1, always swap */ + /* swapRGB_on=-1, never swap */ + if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) { + for (y = 0; y < vh; y++) { + for (x = 0; x < vw; x++) { + i = (y * vw + x) * 3; + *(temp) = *(output + i); + *(output + i) = *(output + i + 2); + *(output + i + 2) = *(temp); + } + } + } + /* brightness */ + if (stv680->chgbright == 1) { + if (stv680->brightness >= 32767) { + p = (stv680->brightness - 32767) / 256; + for (x = 0; x < (vw * vh * 3); x++) { + if ((*(output + x) + (unsigned char) p) > 255) + *(output + x) = 255; + else + *(output + x) += (unsigned char) p; + } /* for */ + } else { + p = (32767 - stv680->brightness) / 256; + for (x = 0; x < (vw * vh * 3); x++) { + if ((unsigned char) p > *(output + x)) + *(output + x) = 0; + else + *(output + x) -= (unsigned char) p; + } /* for */ + } /* else */ + } + /* if */ + frame->curpix = 0; + frame->curlinepix = 0; + frame->grabstate = FRAME_DONE; + stv680->framecount++; + stv680->readcount++; + if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) { + stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1); + } + +} /* bayer_unshuffle */ + +/******* end routines from the pencam program *********/ + +static int stv680_newframe (struct usb_stv *stv680, int framenr) +{ + int errors = 0; + + while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) { + if (!stv680->frame[framenr].curpix) { + errors++; + } + wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY)); + + if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { + stv680->nullpackets = 0; + PDEBUG (2, "STV(i): too many null length packets, restarting capture"); + stv680_stop_stream (stv680); + stv680_start_stream (stv680); + } else { + if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) { + stv680->frame[framenr].grabstate = FRAME_ERROR; + PDEBUG (2, "STV(e): FRAME_ERROR in _newframe"); + return -EIO; + } + stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY; + + bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]); + + stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED; + stv680->scratch_use++; + if (stv680->scratch_use >= STV680_NUMSCRATCH) + stv680->scratch_use = 0; + if (errors > STV680_MAX_ERRORS) { + errors = 0; + PDEBUG (2, "STV(i): too many errors, restarting capture"); + stv680_stop_stream (stv680); + stv680_start_stream (stv680); + } + } /* else */ + } /* while */ + return 0; +} + +/********************************************************************* + * Video4Linux + *********************************************************************/ + +static int stv_open (struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct usb_stv *stv680 = video_get_drvdata(dev); + int err = 0; + + /* we are called with the BKL held */ + stv680->user = 1; + err = stv_init (stv680); /* main initialization routine for camera */ + + if (err >= 0) { + stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES); + if (!stv680->fbuf) { + PDEBUG (0, "STV(e): Could not rvmalloc frame bufer"); + err = -ENOMEM; + } + file->private_data = dev; + } + if (err) + stv680->user = 0; + + return err; +} + +static int stv_close (struct inode *inode, struct file *file) +{ + struct video_device *dev = file->private_data; + struct usb_stv *stv680 = video_get_drvdata(dev); + int i; + + for (i = 0; i < STV680_NUMFRAMES; i++) + stv680->frame[i].grabstate = FRAME_UNUSED; + if (stv680->streaming) + stv680_stop_stream (stv680); + + if ((i = stv_stop_video (stv680)) < 0) + PDEBUG (1, "STV(e): stop_video failed in stv_close"); + + rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES); + stv680->user = 0; + + if (stv680->removed) { + kfree(stv680); + stv680 = NULL; + PDEBUG (0, "STV(i): device unregistered"); + } + file->private_data = NULL; + return 0; +} + +static int stv680_do_ioctl (struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = file->private_data; + struct usb_stv *stv680 = video_get_drvdata(vdev); + + if (!stv680->udev) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP:{ + struct video_capability *b = arg; + + strcpy (b->name, stv680->camera_name); + b->type = VID_TYPE_CAPTURE; + b->channels = 1; + b->audios = 0; + b->maxwidth = stv680->maxwidth; + b->maxheight = stv680->maxheight; + b->minwidth = stv680->maxwidth / 2; + b->minheight = stv680->maxheight / 2; + return 0; + } + case VIDIOCGCHAN:{ + struct video_channel *v = arg; + + if (v->channel != 0) + return -EINVAL; + v->flags = 0; + v->tuners = 0; + v->type = VIDEO_TYPE_CAMERA; + strcpy (v->name, "STV Camera"); + return 0; + } + case VIDIOCSCHAN:{ + struct video_channel *v = arg; + if (v->channel != 0) + return -EINVAL; + return 0; + } + case VIDIOCGPICT:{ + struct video_picture *p = arg; + + stv680_get_pict (stv680, p); + return 0; + } + case VIDIOCSPICT:{ + struct video_picture *p = arg; + + if (stv680_set_pict (stv680, p)) + return -EINVAL; + return 0; + } + case VIDIOCSWIN:{ + struct video_window *vw = arg; + + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (vw->width != stv680->vwidth) { + if (stv680_set_size (stv680, vw->width, vw->height)) { + PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN"); + return -EINVAL; + } + } + return 0; + } + case VIDIOCGWIN:{ + struct video_window *vw = arg; + + vw->x = 0; /* FIXME */ + vw->y = 0; + vw->chromakey = 0; + vw->flags = 0; + vw->clipcount = 0; + vw->width = stv680->vwidth; + vw->height = stv680->vheight; + return 0; + } + case VIDIOCGMBUF:{ + struct video_mbuf *vm = arg; + int i; + + memset (vm, 0, sizeof (*vm)); + vm->size = STV680_NUMFRAMES * stv680->maxframesize; + vm->frames = STV680_NUMFRAMES; + for (i = 0; i < STV680_NUMFRAMES; i++) + vm->offsets[i] = stv680->maxframesize * i; + return 0; + } + case VIDIOCMCAPTURE:{ + struct video_mmap *vm = arg; + + if (vm->format != STV_VIDEO_PALETTE) { + PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)", + vm->format, STV_VIDEO_PALETTE); + if ((vm->format == 3) && (swapRGB_on == 0)) { + PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON"); + /* this may fix those apps (e.g., xawtv) that want BGR */ + swapRGB = 1; + } + return -EINVAL; + } + if (vm->frame >= STV680_NUMFRAMES) { + PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES"); + return -EINVAL; + } + if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR) + || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) { + PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error", + stv680->frame[vm->frame].grabstate); + return -EBUSY; + } + /* Is this according to the v4l spec??? */ + if (stv680->vwidth != vm->width) { + if (stv680_set_size (stv680, vm->width, vm->height)) { + PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed"); + return -EINVAL; + } + } + stv680->frame[vm->frame].grabstate = FRAME_READY; + + if (!stv680->streaming) + stv680_start_stream (stv680); + + return 0; + } + case VIDIOCSYNC:{ + int *frame = arg; + int ret = 0; + + if (*frame < 0 || *frame >= STV680_NUMFRAMES) { + PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC"); + return -EINVAL; + } + ret = stv680_newframe (stv680, *frame); + stv680->frame[*frame].grabstate = FRAME_UNUSED; + return ret; + } + case VIDIOCGFBUF:{ + struct video_buffer *vb = arg; + + memset (vb, 0, sizeof (*vb)); + return 0; + } + case VIDIOCKEY: + return 0; + case VIDIOCCAPTURE: + { + PDEBUG (2, "STV(e): VIDIOCCAPTURE failed"); + return -EINVAL; + } + case VIDIOCSFBUF: + case VIDIOCGTUNER: + case VIDIOCSTUNER: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + return -EINVAL; + default: + return -ENOIOCTLCMD; + } /* end switch */ + + return 0; +} + +static int stv680_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, stv680_do_ioctl); +} + +static int stv680_mmap (struct file *file, struct vm_area_struct *vma) +{ + struct video_device *dev = file->private_data; + struct usb_stv *stv680 = video_get_drvdata(dev); + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + mutex_lock(&stv680->lock); + + if (stv680->udev == NULL) { + mutex_unlock(&stv680->lock); + return -EIO; + } + if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1) + & ~(PAGE_SIZE - 1))) { + mutex_unlock(&stv680->lock); + return -EINVAL; + } + pos = (unsigned long) stv680->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { + mutex_unlock(&stv680->lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + mutex_unlock(&stv680->lock); + + return 0; +} + +static ssize_t stv680_read (struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct video_device *dev = file->private_data; + unsigned long int realcount = count; + int ret = 0; + struct usb_stv *stv680 = video_get_drvdata(dev); + unsigned long int i; + + if (STV680_NUMFRAMES != 2) { + PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!"); + return -1; + } + if (stv680->udev == NULL) + return -EIO; + if (realcount > (stv680->vwidth * stv680->vheight * 3)) + realcount = stv680->vwidth * stv680->vheight * 3; + + /* Shouldn't happen: */ + if (stv680->frame[0].grabstate == FRAME_GRABBING) { + PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read"); + return -EBUSY; + } + stv680->frame[0].grabstate = FRAME_READY; + stv680->frame[1].grabstate = FRAME_UNUSED; + stv680->curframe = 0; + + if (!stv680->streaming) + stv680_start_stream (stv680); + + if (!stv680->streaming) { + ret = stv680_newframe (stv680, 0); /* ret should = 0 */ + } + + ret = stv680_newframe (stv680, 0); + + if (!ret) { + if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) { + PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i); + return -EFAULT; + } + } else { + realcount = ret; + } + stv680->frame[0].grabstate = FRAME_UNUSED; + return realcount; +} /* stv680_read */ + +static struct file_operations stv680_fops = { + .owner = THIS_MODULE, + .open = stv_open, + .release = stv_close, + .read = stv680_read, + .mmap = stv680_mmap, + .ioctl = stv680_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static struct video_device stv680_template = { + .owner = THIS_MODULE, + .name = "STV0680 USB camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_SE401, + .fops = &stv680_fops, + .release = video_device_release, + .minor = -1, +}; + +static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface; + struct usb_stv *stv680 = NULL; + char *camera_name = NULL; + int retval = 0; + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) { + PDEBUG (0, "STV(e): Number of Configurations != 1"); + return -ENODEV; + } + + interface = &intf->altsetting[0]; + /* Is it a STV680? */ + if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) { + camera_name = "STV0680"; + PDEBUG (0, "STV(i): STV0680 camera found."); + } else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) { + camera_name = "Creative WebCam Go Mini"; + PDEBUG (0, "STV(i): Creative WebCam Go Mini found."); + } else { + PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values."); + PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer."); + retval = -ENODEV; + goto error; + } + /* We found one */ + if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) { + PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct."); + retval = -ENOMEM; + goto error; + } + + stv680->udev = dev; + stv680->camera_name = camera_name; + + stv680->vdev = video_device_alloc(); + if (!stv680->vdev) { + retval = -ENOMEM; + goto error; + } + memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template)); + stv680->vdev->dev = &intf->dev; + video_set_drvdata(stv680->vdev, stv680); + + memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name)); + init_waitqueue_head (&stv680->wq); + mutex_init (&stv680->lock); + wmb (); + + if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + PDEBUG (0, "STV(e): video_register_device failed"); + retval = -EIO; + goto error_vdev; + } + PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor); + + usb_set_intfdata (intf, stv680); + stv680_create_sysfs_files(stv680->vdev); + return 0; + +error_vdev: + video_device_release(stv680->vdev); +error: + kfree(stv680); + return retval; +} + +static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680) +{ + int i; + + stv680->udev = NULL; + stv680->frame[0].grabstate = FRAME_ERROR; + stv680->frame[1].grabstate = FRAME_ERROR; + stv680->streaming = 0; + + wake_up_interruptible (&stv680->wq); + + for (i = 0; i < STV680_NUMSBUF; i++) + if (stv680->urb[i]) { + usb_kill_urb (stv680->urb[i]); + usb_free_urb (stv680->urb[i]); + stv680->urb[i] = NULL; + kfree(stv680->sbuf[i].data); + } + for (i = 0; i < STV680_NUMSCRATCH; i++) + kfree(stv680->scratch[i].data); + PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name); + + /* Free the memory */ + kfree(stv680); +} + +static void stv680_disconnect (struct usb_interface *intf) +{ + struct usb_stv *stv680 = usb_get_intfdata (intf); + + usb_set_intfdata (intf, NULL); + + if (stv680) { + /* We don't want people trying to open up the device */ + if (stv680->vdev) { + stv680_remove_sysfs_files(stv680->vdev); + video_unregister_device(stv680->vdev); + stv680->vdev = NULL; + } + if (!stv680->user) { + usb_stv680_remove_disconnected (stv680); + } else { + stv680->removed = 1; + } + } +} + +static struct usb_driver stv680_driver = { + .name = "stv680", + .probe = stv680_probe, + .disconnect = stv680_disconnect, + .id_table = device_table +}; + +/******************************************************************** + * Module routines + ********************************************************************/ + +static int __init usb_stv680_init (void) +{ + if (usb_register (&stv680_driver) < 0) { + PDEBUG (0, "STV(e): Could not setup STV0680 driver"); + return -1; + } + PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION); + + info(DRIVER_DESC " " DRIVER_VERSION); + return 0; +} + +static void __exit usb_stv680_exit (void) +{ + usb_deregister (&stv680_driver); + PDEBUG (0, "STV(i): driver deregistered"); +} + +module_init (usb_stv680_init); +module_exit (usb_stv680_exit); diff --git a/drivers/media/video/stv680.h b/drivers/media/video/stv680.h new file mode 100644 index 000000000000..a08f1b08a4b0 --- /dev/null +++ b/drivers/media/video/stv680.h @@ -0,0 +1,227 @@ +/**************************************************************************** + * + * Filename: stv680.h + * + * Description: + * This is a USB driver for STV0680 based usb video cameras. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + ****************************************************************************/ + +/* size of usb transfers */ +#define STV680_PACKETSIZE 4096 + +/* number of queued bulk transfers to use, may have problems if > 1 */ +#define STV680_NUMSBUF 1 + +/* number of frames supported by the v4l part */ +#define STV680_NUMFRAMES 2 + +/* scratch buffers for passing data to the decoders: 2 or 4 are good */ +#define STV680_NUMSCRATCH 2 + +/* number of nul sized packets to receive before kicking the camera */ +#define STV680_MAX_NULLPACKETS 200 + +/* number of decoding errors before kicking the camera */ +#define STV680_MAX_ERRORS 100 + +#define USB_PENCAM_VENDOR_ID 0x0553 +#define USB_PENCAM_PRODUCT_ID 0x0202 + +#define USB_CREATIVEGOMINI_VENDOR_ID 0x041e +#define USB_CREATIVEGOMINI_PRODUCT_ID 0x4007 + +#define PENCAM_TIMEOUT 1000 +/* fmt 4 */ +#define STV_VIDEO_PALETTE VIDEO_PALETTE_RGB24 + +static struct usb_device_id device_table[] = { + {USB_DEVICE (USB_PENCAM_VENDOR_ID, USB_PENCAM_PRODUCT_ID)}, + {USB_DEVICE (USB_CREATIVEGOMINI_VENDOR_ID, USB_CREATIVEGOMINI_PRODUCT_ID)}, + {} +}; +MODULE_DEVICE_TABLE (usb, device_table); + +struct stv680_sbuf { + unsigned char *data; +}; + +enum { + FRAME_UNUSED, /* Unused (no MCAPTURE) */ + FRAME_READY, /* Ready to start grabbing */ + FRAME_GRABBING, /* In the process of being grabbed into */ + FRAME_DONE, /* Finished grabbing, but not been synced yet */ + FRAME_ERROR, /* Something bad happened while processing */ +}; + +enum { + BUFFER_UNUSED, + BUFFER_READY, + BUFFER_BUSY, + BUFFER_DONE, +}; + +/* raw camera data <- sbuf (urb transfer buf) */ +struct stv680_scratch { + unsigned char *data; + volatile int state; + int offset; + int length; +}; + +/* processed data for display ends up here, after bayer */ +struct stv680_frame { + unsigned char *data; /* Frame buffer */ + volatile int grabstate; /* State of grabbing */ + unsigned char *curline; + int curlinepix; + int curpix; +}; + +/* this is almost the video structure uvd_t, with extra parameters for stv */ +struct usb_stv { + struct video_device *vdev; + + struct usb_device *udev; + + unsigned char bulk_in_endpointAddr; /* __u8 the address of the bulk in endpoint */ + char *camera_name; + + unsigned int VideoMode; /* 0x0100 = VGA, 0x0000 = CIF, 0x0300 = QVGA */ + int SupportedModes; + int CIF; + int VGA; + int QVGA; + int cwidth; /* camera width */ + int cheight; /* camera height */ + int maxwidth; /* max video width */ + int maxheight; /* max video height */ + int vwidth; /* current width for video window */ + int vheight; /* current height for video window */ + unsigned long int rawbufsize; + unsigned long int maxframesize; /* rawbufsize * 3 for RGB */ + + int origGain; + int origMode; /* original camera mode */ + + struct mutex lock; /* to lock the structure */ + int user; /* user count for exclusive use */ + int removed; /* device disconnected */ + int streaming; /* Are we streaming video? */ + char *fbuf; /* Videodev buffer area */ + struct urb *urb[STV680_NUMSBUF]; /* # of queued bulk transfers */ + int curframe; /* Current receiving frame */ + struct stv680_frame frame[STV680_NUMFRAMES]; /* # frames supported by v4l part */ + int readcount; + int framecount; + int error; + int dropped; + int scratch_next; + int scratch_use; + int scratch_overflow; + struct stv680_scratch scratch[STV680_NUMSCRATCH]; /* for decoders */ + struct stv680_sbuf sbuf[STV680_NUMSBUF]; + + unsigned int brightness; + unsigned int chgbright; + unsigned int whiteness; + unsigned int colour; + unsigned int contrast; + unsigned int hue; + unsigned int palette; + unsigned int depth; /* rgb24 in bits */ + + wait_queue_head_t wq; /* Processes waiting */ + + int nullpackets; +}; + + +static const unsigned char red[256] = { + 0, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 25, 30, 35, 38, 42, + 44, 47, 50, 53, 54, 57, 59, 61, 63, 65, 67, 69, + 71, 71, 73, 75, 77, 78, 80, 81, 82, 84, 85, 87, + 88, 89, 90, 91, 93, 94, 95, 97, 98, 98, 99, 101, + 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, + 114, 115, 116, 116, 117, 118, 119, 120, 121, 122, 123, 124, + 125, 125, 126, 127, 128, 129, 129, 130, 131, 132, 133, 134, + 134, 135, 135, 136, 137, 138, 139, 140, 140, 141, 142, 143, + 143, 143, 144, 145, 146, 147, 147, 148, 149, 150, 150, 151, + 152, 152, 152, 153, 154, 154, 155, 156, 157, 157, 158, 159, + 159, 160, 161, 161, 161, 162, 163, 163, 164, 165, 165, 166, + 167, 167, 168, 168, 169, 170, 170, 170, 171, 171, 172, 173, + 173, 174, 174, 175, 176, 176, 177, 178, 178, 179, 179, 179, + 180, 180, 181, 181, 182, 183, 183, 184, 184, 185, 185, 186, + 187, 187, 188, 188, 188, 188, 189, 190, 190, 191, 191, 192, + 192, 193, 193, 194, 195, 195, 196, 196, 197, 197, 197, 197, + 198, 198, 199, 199, 200, 201, 201, 202, 202, 203, 203, 204, + 204, 205, 205, 206, 206, 206, 206, 207, 207, 208, 208, 209, + 209, 210, 210, 211, 211, 212, 212, 213, 213, 214, 214, 215, + 215, 215, 215, 216, 216, 217, 217, 218, 218, 218, 219, 219, + 220, 220, 221, 221 +}; + +static const unsigned char green[256] = { + 0, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 28, 34, 39, 43, 47, + 50, 53, 56, 59, 61, 64, 66, 68, 71, 73, 75, 77, + 79, 80, 82, 84, 86, 87, 89, 91, 92, 94, 95, 97, + 98, 100, 101, 102, 104, 105, 106, 108, 109, 110, 111, 113, + 114, 115, 116, 117, 118, 120, 121, 122, 123, 124, 125, 126, + 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, + 139, 140, 141, 142, 143, 144, 144, 145, 146, 147, 148, 149, + 150, 151, 151, 152, 153, 154, 155, 156, 156, 157, 158, 159, + 160, 160, 161, 162, 163, 164, 164, 165, 166, 167, 167, 168, + 169, 170, 170, 171, 172, 172, 173, 174, 175, 175, 176, 177, + 177, 178, 179, 179, 180, 181, 182, 182, 183, 184, 184, 185, + 186, 186, 187, 187, 188, 189, 189, 190, 191, 191, 192, 193, + 193, 194, 194, 195, 196, 196, 197, 198, 198, 199, 199, 200, + 201, 201, 202, 202, 203, 204, 204, 205, 205, 206, 206, 207, + 208, 208, 209, 209, 210, 210, 211, 212, 212, 213, 213, 214, + 214, 215, 215, 216, 217, 217, 218, 218, 219, 219, 220, 220, + 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227, + 227, 228, 228, 229, 229, 230, 230, 231, 231, 232, 232, 233, + 233, 234, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239, + 239, 240, 240, 241, 241, 242, 242, 243, 243, 243, 244, 244, + 245, 245, 246, 246 +}; + +static const unsigned char blue[256] = { + 0, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 30, 37, 42, 47, 51, + 55, 58, 61, 64, 67, 70, 72, 74, 78, 80, 82, 84, + 86, 88, 90, 92, 94, 95, 97, 100, 101, 103, 104, 106, + 107, 110, 111, 112, 114, 115, 116, 118, 119, 121, 122, 124, + 125, 126, 127, 128, 129, 132, 133, 134, 135, 136, 137, 138, + 139, 140, 141, 143, 144, 145, 146, 147, 148, 149, 150, 151, + 152, 154, 155, 156, 157, 158, 158, 159, 160, 161, 162, 163, + 165, 166, 166, 167, 168, 169, 170, 171, 171, 172, 173, 174, + 176, 176, 177, 178, 179, 180, 180, 181, 182, 183, 183, 184, + 185, 187, 187, 188, 189, 189, 190, 191, 192, 192, 193, 194, + 194, 195, 196, 196, 198, 199, 200, 200, 201, 202, 202, 203, + 204, 204, 205, 205, 206, 207, 207, 209, 210, 210, 211, 212, + 212, 213, 213, 214, 215, 215, 216, 217, 217, 218, 218, 220, + 221, 221, 222, 222, 223, 224, 224, 225, 225, 226, 226, 227, + 228, 228, 229, 229, 231, 231, 232, 233, 233, 234, 234, 235, + 235, 236, 236, 237, 238, 238, 239, 239, 240, 240, 242, 242, + 243, 243, 244, 244, 245, 246, 246, 247, 247, 248, 248, 249, + 249, 250, 250, 251, 251, 253, 253, 254, 254, 255, 255, 255, + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + 255, 255, 255, 255 +}; diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index fc3d5824efff..78e043ac9ea0 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -48,9 +48,8 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> -#include "bttv.h" -#include <media/audiochip.h> #include <media/v4l2-common.h> +#include <media/i2c-addr.h> #ifndef VIDEO_AUDIO_BALANCE # define VIDEO_AUDIO_BALANCE 32 @@ -71,7 +70,7 @@ module_param(maxvol, int, S_IRUGO | S_IWUSR); /* Address to scan (I2C address of this chip) */ static unsigned short normal_i2c[] = { - I2C_TDA7432 >> 1, + I2C_ADDR_TDA7432 >> 1, I2C_CLIENT_END, }; I2C_CLIENT_INSMOD; diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index a796a4e1917c..027c8a074dfe 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -281,7 +281,7 @@ static void tda827xa_agcf(struct i2c_client *c) static void tda8290_i2c_bridge(struct i2c_client *c, int close) { unsigned char enable[2] = { 0x21, 0xC0 }; - unsigned char disable[2] = { 0x21, 0x80 }; + unsigned char disable[2] = { 0x21, 0x00 }; unsigned char *msg; if(close) { msg = enable; @@ -302,6 +302,7 @@ static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq) unsigned char soft_reset[] = { 0x00, 0x00 }; unsigned char easy_mode[] = { 0x01, t->tda8290_easy_mode }; unsigned char expert_mode[] = { 0x01, 0x80 }; + unsigned char agc_out_on[] = { 0x02, 0x00 }; unsigned char gainset_off[] = { 0x28, 0x14 }; unsigned char if_agc_spd[] = { 0x0f, 0x88 }; unsigned char adc_head_6[] = { 0x05, 0x04 }; @@ -320,6 +321,7 @@ static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq) pll_stat; i2c_master_send(c, easy_mode, 2); + i2c_master_send(c, agc_out_on, 2); i2c_master_send(c, soft_reset, 2); msleep(1); @@ -470,6 +472,7 @@ static void standby(struct i2c_client *c) struct tuner *t = i2c_get_clientdata(c); unsigned char cb1[] = { 0x30, 0xD0 }; unsigned char tda8290_standby[] = { 0x00, 0x02 }; + unsigned char tda8290_agc_tri[] = { 0x02, 0x20 }; struct i2c_msg msg = {.addr = t->tda827x_addr, .flags=0, .buf=cb1, .len = 2}; tda8290_i2c_bridge(c, 1); @@ -477,6 +480,7 @@ static void standby(struct i2c_client *c) cb1[1] = 0x90; i2c_transfer(c->adapter, &msg, 1); tda8290_i2c_bridge(c, 0); + i2c_master_send(c, tda8290_agc_tri, 2); i2c_master_send(c, tda8290_standby, 2); } @@ -565,7 +569,7 @@ int tda8290_init(struct i2c_client *c) strlcpy(c->name, "tda8290+75a", sizeof(c->name)); t->tda827x_ver = 2; } - tuner_info("tuner: type set to %s\n", c->name); + tuner_info("type set to %s\n", c->name); t->set_tv_freq = set_tv_freq; t->set_radio_freq = set_radio_freq; diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c index ed4c04119ccc..ef494febb5e4 100644 --- a/drivers/media/video/tda9840.c +++ b/drivers/media/video/tda9840.c @@ -24,6 +24,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + #include <linux/module.h> #include <linux/ioctl.h> #include <linux/i2c.h> @@ -34,7 +35,7 @@ static int debug = 0; /* insmod parameter */ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) + do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) #define SWITCH 0x00 #define LEVEL_ADJUST 0x02 @@ -42,7 +43,7 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #define TEST 0x04 /* addresses to scan, found only at 0x42 (7-Bit) */ -static unsigned short normal_i2c[] = { I2C_TDA9840, I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { I2C_ADDR_TDA9840, I2C_CLIENT_END }; /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; @@ -222,7 +223,7 @@ static int detach(struct i2c_client *client) static struct i2c_driver driver = { .driver = { - .name = "tda9840", + .name = "tda9840", }, .id = I2C_DRIVERID_TDA9840, .attach_adapter = attach, diff --git a/drivers/media/video/tda9840.h b/drivers/media/video/tda9840.h index 28021053bd09..7da8432cdca7 100644 --- a/drivers/media/video/tda9840.h +++ b/drivers/media/video/tda9840.h @@ -1,7 +1,7 @@ #ifndef __INCLUDED_TDA9840__ #define __INCLUDED_TDA9840__ -#define I2C_TDA9840 0x42 +#define I2C_ADDR_TDA9840 0x42 #define TDA9840_DETECT _IOR('v',1,int) /* return values for TDA9840_DETCT */ diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index ef98c4982250..103ccb919292 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -30,24 +30,22 @@ #include <linux/i2c-algo-bit.h> #include <linux/init.h> -#include "bttv.h" -#include <media/audiochip.h> + +#include <media/i2c-addr.h> static int debug; /* insmod parameter */ module_param(debug, int, S_IRUGO | S_IWUSR); MODULE_LICENSE("GPL"); - /* Addresses to scan */ static unsigned short normal_i2c[] = { - I2C_TDA9875 >> 1, + I2C_ADDR_TDA9875 >> 1, I2C_CLIENT_END }; I2C_CLIENT_INSMOD; /* This is a superset of the TDA9875 */ struct tda9875 { - int mode; int rvol, lvol; int bass, treble; struct i2c_client c; @@ -197,7 +195,6 @@ static void do_tda9875_init(struct i2c_client *client) tda9875_write(client, TDA9875_MUT, 0xcc ); /* General mute */ - t->mode=AUDIO_UNMUTE; t->lvol=t->rvol =0; /* 0dB */ t->bass=0; /* 0dB */ t->treble=0; /* 0dB */ diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c index bb35844e3842..523df0b8cc63 100644 --- a/drivers/media/video/tea6415c.c +++ b/drivers/media/video/tea6415c.c @@ -26,6 +26,7 @@ Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA. */ + #include <linux/module.h> #include <linux/ioctl.h> #include <linux/i2c.h> @@ -36,7 +37,7 @@ static int debug = 0; /* insmod parameter */ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) + do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) #define TEA6415C_NUM_INPUTS 8 #define TEA6415C_NUM_OUTPUTS 6 @@ -107,7 +108,7 @@ static int switch_matrix(struct i2c_client *client, int i, int o) { u8 byte = 0; int ret; - + dprintk("adr:0x%02x, i:%d, o:%d\n", client->addr, i, o); /* check if the pins are valid */ @@ -191,7 +192,7 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) static struct i2c_driver driver = { .driver = { - .name = "tea6415c", + .name = "tea6415c", }, .id = I2C_DRIVERID_TEA6415C, .attach_adapter = attach, diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index 4dcba5a4fff0..e0ff811fab6f 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -26,6 +26,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + #include <linux/module.h> #include <linux/ioctl.h> #include <linux/i2c.h> @@ -36,10 +37,10 @@ static int debug = 0; /* insmod parameter */ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); #define dprintk(args...) \ - do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) + do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0) /* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */ -static unsigned short normal_i2c[] = { I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { I2C_ADDR_TEA6420_1, I2C_ADDR_TEA6420_2, I2C_CLIENT_END }; /* magic definition of all other variables and things */ I2C_CLIENT_INSMOD; @@ -83,7 +84,7 @@ static int tea6420_switch(struct i2c_client *client, int i, int o, int g) dprintk("i2c_smbus_write_byte() failed, ret:%d\n", ret); return -EIO; } - + return 0; } @@ -167,7 +168,7 @@ static int command(struct i2c_client *client, unsigned int cmd, void *arg) static struct i2c_driver driver = { .driver = { - .name = "tea6420", + .name = "tea6420", }, .id = I2C_DRIVERID_TEA6420, .attach_adapter = attach, diff --git a/drivers/media/video/tea6420.h b/drivers/media/video/tea6420.h index ea664df15ad4..5ef7c18e0c54 100644 --- a/drivers/media/video/tea6420.h +++ b/drivers/media/video/tea6420.h @@ -2,8 +2,8 @@ #define __INCLUDED_TEA6420__ /* possible addresses */ -#define I2C_TEA6420_1 0x4c -#define I2C_TEA6420_2 0x4d +#define I2C_ADDR_TEA6420_1 0x4c +#define I2C_ADDR_TEA6420_2 0x4d struct tea6420_multiplex { diff --git a/drivers/media/video/tuner-3036.c b/drivers/media/video/tuner-3036.c index c4a78e7a5a58..74ab48c09c6a 100644 --- a/drivers/media/video/tuner-3036.c +++ b/drivers/media/video/tuner-3036.c @@ -5,7 +5,7 @@ * * The SAB3036 is just about different enough from the chips that * tuner.c copes with to make it not worth the effort to crowbar - * the support into that file. So instead we have a separate driver. + * the support into that file. So instead we have a separate driver. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -56,15 +56,15 @@ tuner_getstatus (struct i2c_client *c) #define TUNER_FL 0x80 -static int +static int tuner_islocked (struct i2c_client *c) { - return (tuner_getstatus(c) & TUNER_FL); + return (tuner_getstatus(c) & TUNER_FL); } /* ---------------------------------------------------------------------- */ -static void +static void set_tv_freq(struct i2c_client *c, int freq) { u16 div = ((freq * 20) / 16); @@ -73,26 +73,26 @@ set_tv_freq(struct i2c_client *c, int freq) if (debug) printk(KERN_DEBUG "tuner: setting frequency %dMHz, divisor %x\n", freq / 16, div); - + /* Select high tuning current */ buffer[0] = 0x29; buffer[1] = 0x3e; if (i2c_master_send(c, buffer, 2) != 2) printk("tuner: i2c i/o error 1\n"); - + buffer[0] = 0x80 | ((div>>8) & 0x7f); buffer[1] = div & 0xff; if (i2c_master_send(c, buffer, 2) != 2) printk("tuner: i2c i/o error 2\n"); - + while (!tuner_islocked(c) && time_before(jiffies, give_up)) schedule(); - + if (!tuner_islocked(c)) printk(KERN_WARNING "tuner: failed to achieve PLL lock\n"); - + /* Select low tuning current and engage AFC */ buffer[0] = 0x29; buffer[1] = 0xb2; @@ -106,7 +106,7 @@ set_tv_freq(struct i2c_client *c, int freq) /* ---------------------------------------------------------------------- */ -static int +static int tuner_attach(struct i2c_adapter *adap, int addr, int kind) { static unsigned char buffer[] = { 0x29, 0x32, 0x2a, 0, 0x2b, 0 }; @@ -116,18 +116,18 @@ tuner_attach(struct i2c_adapter *adap, int addr, int kind) if (this_adap > 0) return -1; this_adap++; - - client_template.adapter = adap; - client_template.addr = addr; + + client_template.adapter = adap; + client_template.addr = addr; client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &client_template, sizeof(struct i2c_client)); + if (client == NULL) + return -ENOMEM; + memcpy(client, &client_template, sizeof(struct i2c_client)); printk("tuner: SAB3036 found, status %02x\n", tuner_getstatus(client)); - i2c_attach_client(client); + i2c_attach_client(client); if (i2c_master_send(client, buffer, 2) != 2) printk("tuner: i2c i/o error 1\n"); @@ -138,30 +138,30 @@ tuner_attach(struct i2c_adapter *adap, int addr, int kind) return 0; } -static int +static int tuner_detach(struct i2c_client *c) { return 0; } -static int +static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { int *iarg = (int*)arg; - switch (cmd) + switch (cmd) { case VIDIOCSFREQ: set_tv_freq(client, *iarg); break; - + default: return -EINVAL; } return 0; } -static int +static int tuner_probe(struct i2c_adapter *adap) { this_adap = 0; @@ -172,8 +172,8 @@ tuner_probe(struct i2c_adapter *adap) /* ----------------------------------------------------------------------- */ -static struct i2c_driver -i2c_driver_tuner = +static struct i2c_driver +i2c_driver_tuner = { .driver = { .name = "sab3036", @@ -186,7 +186,7 @@ i2c_driver_tuner = static struct i2c_client client_template = { - .driver = &i2c_driver_tuner, + .driver = &i2c_driver_tuner, .name = "SAB3036", }; diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index b6101bf446d4..df195c905366 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -21,7 +21,6 @@ #include <media/tuner.h> #include <media/v4l2-common.h> -#include <media/audiochip.h> #define UNSET (-1U) @@ -173,7 +172,6 @@ static void set_type(struct i2c_client *c, unsigned int type, } t->type = type; - switch (t->type) { case TUNER_MT2032: microtune_init(c); @@ -404,15 +402,16 @@ static void tuner_status(struct i2c_client *client) tuner_info("Tuner mode: %s\n", p); tuner_info("Frequency: %lu.%02lu MHz\n", freq, freq_fraction); tuner_info("Standard: 0x%08llx\n", t->std); - if (t->mode == V4L2_TUNER_RADIO) { - if (t->has_signal) { - tuner_info("Signal strength: %d\n", t->has_signal(client)); - } - if (t->is_stereo) { - tuner_info("Stereo: %s\n", t->is_stereo(client) ? "yes" : "no"); - } + if (t->mode != V4L2_TUNER_RADIO) + return; + if (t->has_signal) { + tuner_info("Signal strength: %d\n", t->has_signal(client)); + } + if (t->is_stereo) { + tuner_info("Stereo: %s\n", t->is_stereo(client) ? "yes" : "no"); } } + /* ---------------------------------------------------------------------- */ /* static var Used only in tuner_attach and tuner_probe */ @@ -744,33 +743,29 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) return 0; switch_v4l2(); - if (V4L2_TUNER_RADIO == t->mode) { - - if (t->has_signal) - tuner->signal = t->has_signal(client); - - if (t->is_stereo) { - if (t->is_stereo(client)) { - tuner->rxsubchans = - V4L2_TUNER_SUB_STEREO | - V4L2_TUNER_SUB_MONO; - } else { - tuner->rxsubchans = - V4L2_TUNER_SUB_MONO; - } - } - - tuner->capability |= - V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; - - tuner->audmode = t->audmode; - - tuner->rangelow = radio_range[0] * 16000; - tuner->rangehigh = radio_range[1] * 16000; - } else { + tuner->type = t->mode; + if (t->mode != V4L2_TUNER_RADIO) { tuner->rangelow = tv_range[0] * 16; tuner->rangehigh = tv_range[1] * 16; + break; } + + /* radio mode */ + if (t->has_signal) + tuner->signal = t->has_signal(client); + + tuner->rxsubchans = + V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + if (t->is_stereo) { + tuner->rxsubchans = t->is_stereo(client) ? + V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; + } + + tuner->capability |= + V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + tuner->audmode = t->audmode; + tuner->rangelow = radio_range[0] * 16000; + tuner->rangehigh = radio_range[1] * 16000; break; } case VIDIOC_S_TUNER: @@ -782,10 +777,11 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) switch_v4l2(); - if (V4L2_TUNER_RADIO == t->mode) { - t->audmode = tuner->audmode; - set_radio_freq(client, t->radio_freq); - } + /* do nothing unless we're a radio tuner */ + if (t->mode != V4L2_TUNER_RADIO) + break; + t->audmode = tuner->audmode; + set_radio_freq(client, t->radio_freq); break; } case VIDIOC_LOG_STATUS: diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index 37977ff49780..5d7abed71674 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -79,17 +79,6 @@ MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner"); #define TUNER_PLL_LOCKED 0x40 #define TUNER_STEREO_MK3 0x04 -#define TUNER_PARAM_ANALOG 0 /* to be removed */ -/* FIXME: - * Right now, all tuners are using the first tuner_params[] array element - * for analog mode. In the future, we will be merging similar tuner - * definitions together, such that each tuner definition will have a - * tuner_params struct for each available video standard. At that point, - * TUNER_PARAM_ANALOG will be removed, and the tuner_params[] array - * element will be chosen based on the video standard in use. - * - */ - /* ---------------------------------------------------------------------- */ static int tuner_getstatus(struct i2c_client *c) @@ -133,14 +122,53 @@ static int tuner_stereo(struct i2c_client *c) static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) { struct tuner *t = i2c_get_clientdata(c); - u8 config, tuneraddr; + u8 config, cb, tuneraddr; u16 div; struct tunertype *tun; u8 buffer[4]; int rc, IFPCoff, i, j; + enum param_type desired_type; tun = &tuners[t->type]; - j = TUNER_PARAM_ANALOG; + + /* IFPCoff = Video Intermediate Frequency - Vif: + 940 =16*58.75 NTSC/J (Japan) + 732 =16*45.75 M/N STD + 704 =16*44 ATSC (at DVB code) + 632 =16*39.50 I U.K. + 622.4=16*38.90 B/G D/K I, L STD + 592 =16*37.00 D China + 590 =16.36.875 B Australia + 543.2=16*33.95 L' STD + 171.2=16*10.70 FM Radio (at set_radio_freq) + */ + + if (t->std == V4L2_STD_NTSC_M_JP) { + IFPCoff = 940; + desired_type = TUNER_PARAM_TYPE_NTSC; + } else if ((t->std & V4L2_STD_MN) && + !(t->std & ~V4L2_STD_MN)) { + IFPCoff = 732; + desired_type = TUNER_PARAM_TYPE_NTSC; + } else if (t->std == V4L2_STD_SECAM_LC) { + IFPCoff = 543; + desired_type = TUNER_PARAM_TYPE_SECAM; + } else { + IFPCoff = 623; + desired_type = TUNER_PARAM_TYPE_PAL; + } + + for (j = 0; j < tun->count-1; j++) { + if (desired_type != tun->params[j].type) + continue; + break; + } + /* use default tuner_params if desired_type not available */ + if (desired_type != tun->params[j].type) { + tuner_dbg("IFPCoff = %d: tuner_params undefined for tuner %d\n", + IFPCoff,t->type); + j = 0; + } for (i = 0; i < tun->params[j].count; i++) { if (freq > tun->params[j].ranges[i].limit) @@ -152,11 +180,20 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) freq, tun->params[j].ranges[i - 1].limit); freq = tun->params[j].ranges[--i].limit; } - config = tun->params[j].ranges[i].cb; - /* i == 0 -> VHF_LO */ - /* i == 1 -> VHF_HI */ - /* i == 2 -> UHF */ - tuner_dbg("tv: range %d\n",i); + config = tun->params[j].ranges[i].config; + cb = tun->params[j].ranges[i].cb; + /* i == 0 -> VHF_LO + * i == 1 -> VHF_HI + * i == 2 -> UHF */ + tuner_dbg("tv: param %d, range %d\n",j,i); + + div=freq + IFPCoff + offset; + + tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n", + freq / 16, freq % 16 * 100 / 16, + IFPCoff / 16, IFPCoff % 16 * 100 / 16, + offset / 16, offset % 16 * 100 / 16, + div); /* tv norm specific stuff for multi-norm tuners */ switch (t->type) { @@ -164,40 +201,40 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) /* 0x01 -> ??? no change ??? */ /* 0x02 -> PAL BDGHI / SECAM L */ /* 0x04 -> ??? PAL others / SECAM others ??? */ - config &= ~0x02; + cb &= ~0x02; if (t->std & V4L2_STD_SECAM) - config |= 0x02; + cb |= 0x02; break; case TUNER_TEMIC_4046FM5: - config &= ~0x0f; + cb &= ~0x0f; if (t->std & V4L2_STD_PAL_BG) { - config |= TEMIC_SET_PAL_BG; + cb |= TEMIC_SET_PAL_BG; } else if (t->std & V4L2_STD_PAL_I) { - config |= TEMIC_SET_PAL_I; + cb |= TEMIC_SET_PAL_I; } else if (t->std & V4L2_STD_PAL_DK) { - config |= TEMIC_SET_PAL_DK; + cb |= TEMIC_SET_PAL_DK; } else if (t->std & V4L2_STD_SECAM_L) { - config |= TEMIC_SET_PAL_L; + cb |= TEMIC_SET_PAL_L; } break; case TUNER_PHILIPS_FQ1216ME: - config &= ~0x0f; + cb &= ~0x0f; if (t->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { - config |= PHILIPS_SET_PAL_BGDK; + cb |= PHILIPS_SET_PAL_BGDK; } else if (t->std & V4L2_STD_PAL_I) { - config |= PHILIPS_SET_PAL_I; + cb |= PHILIPS_SET_PAL_I; } else if (t->std & V4L2_STD_SECAM_L) { - config |= PHILIPS_SET_PAL_L; + cb |= PHILIPS_SET_PAL_L; } break; @@ -207,15 +244,15 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) /* 0x01 -> ATSC antenna input 2 */ /* 0x02 -> NTSC antenna input 1 */ /* 0x03 -> NTSC antenna input 2 */ - config &= ~0x03; + cb &= ~0x03; if (!(t->std & V4L2_STD_ATSC)) - config |= 2; + cb |= 2; /* FIXME: input */ break; case TUNER_MICROTUNE_4042FI5: /* Set the charge pump for fast tuning */ - tun->params[j].config |= TUNER_CHARGE_PUMP; + config |= TUNER_CHARGE_PUMP; break; case TUNER_PHILIPS_TUV1236D: @@ -227,9 +264,9 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) buffer[1] = 0x00; buffer[2] = 0x17; buffer[3] = 0x00; - config &= ~0x40; + cb &= ~0x40; if (t->std & V4L2_STD_ATSC) { - config |= 0x40; + cb |= 0x40; buffer[1] = 0x04; } /* set to the correct mode (analog or digital) */ @@ -244,47 +281,16 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) break; } - /* IFPCoff = Video Intermediate Frequency - Vif: - 940 =16*58.75 NTSC/J (Japan) - 732 =16*45.75 M/N STD - 704 =16*44 ATSC (at DVB code) - 632 =16*39.50 I U.K. - 622.4=16*38.90 B/G D/K I, L STD - 592 =16*37.00 D China - 590 =16.36.875 B Australia - 543.2=16*33.95 L' STD - 171.2=16*10.70 FM Radio (at set_radio_freq) - */ - - if (t->std == V4L2_STD_NTSC_M_JP) { - IFPCoff = 940; - } else if ((t->std & V4L2_STD_MN) && - !(t->std & ~V4L2_STD_MN)) { - IFPCoff = 732; - } else if (t->std == V4L2_STD_SECAM_LC) { - IFPCoff = 543; - } else { - IFPCoff = 623; - } - - div=freq + IFPCoff + offset; - - tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n", - freq / 16, freq % 16 * 100 / 16, - IFPCoff / 16, IFPCoff % 16 * 100 / 16, - offset / 16, offset % 16 * 100 / 16, - div); - if (tuners[t->type].params->cb_first_if_lower_freq && div < t->last_div) { - buffer[0] = tun->params[j].config; - buffer[1] = config; + buffer[0] = config; + buffer[1] = cb; buffer[2] = (div>>8) & 0x7f; buffer[3] = div & 0xff; } else { buffer[0] = (div>>8) & 0x7f; buffer[1] = div & 0xff; - buffer[2] = tun->params[j].config; - buffer[3] = config; + buffer[2] = config; + buffer[3] = cb; } t->last_div = div; tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", @@ -312,11 +318,11 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) } /* Set the charge pump for optimized phase noise figure */ - tun->params[j].config &= ~TUNER_CHARGE_PUMP; + config &= ~TUNER_CHARGE_PUMP; buffer[0] = (div>>8) & 0x7f; buffer[1] = div & 0xff; - buffer[2] = tun->params[j].config; - buffer[3] = config; + buffer[2] = config; + buffer[3] = cb; tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", buffer[0],buffer[1],buffer[2],buffer[3]); @@ -332,12 +338,21 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) u8 buffer[4]; u16 div; int rc, j; + enum param_type desired_type = TUNER_PARAM_TYPE_RADIO; tun = &tuners[t->type]; - j = TUNER_PARAM_ANALOG; + + for (j = 0; j < tun->count-1; j++) { + if (desired_type != tun->params[j].type) + continue; + break; + } + /* use default tuner_params if desired_type not available */ + if (desired_type != tun->params[j].type) + j = 0; div = (20 * freq / 16000) + (int)(20*10.7); /* IF 10.7 MHz */ - buffer[2] = (tun->params[j].config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */ + buffer[2] = (tun->params[j].ranges[0].config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */ switch (t->type) { case TUNER_TENA_9533_DI: @@ -349,6 +364,9 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) case TUNER_PHILIPS_FMD1216ME_MK3: buffer[3] = 0x19; break; + case TUNER_TNF_5335MF: + buffer[3] = 0x11; + break; case TUNER_PHILIPS_FM1256_IH3: div = (20 * freq) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */ buffer[3] = 0x19; diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c index 6fe781798d89..72e0f01db563 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/video/tuner-types.c @@ -23,22 +23,25 @@ * Each tuner_params array may contain one or more elements, one * for each video standard. * - * FIXME: Some tuner_range definitions are duplicated, and - * should be eliminated. + * FIXME: tuner_params struct contains an element, tda988x. We must + * set this for all tuners that contain a tda988x chip, and then we + * can remove this setting from the various card structs. * - * FIXME: tunertype struct contains an element, has_tda988x. - * We must set this for all tunertypes that contain a tda988x - * chip, and then we can remove this setting from the various - * card structs. + * FIXME: Right now, all tuners are using the first tuner_params[] + * array element for analog mode. In the future, we will be merging + * similar tuner definitions together, such that each tuner definition + * will have a tuner_params struct for each available video standard. + * At that point, the tuner_params[] array element will be chosen + * based on the video standard in use. */ /* 0-9 */ /* ------------ TUNER_TEMIC_PAL - TEMIC PAL ------------ */ static struct tuner_range tuner_temic_pal_ranges[] = { - { 16 * 140.25 /*MHz*/, 0x02, }, - { 16 * 463.25 /*MHz*/, 0x04, }, - { 16 * 999.99 , 0x01, }, + { 16 * 140.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 463.25 /*MHz*/, 0x8e, 0x04, }, + { 16 * 999.99 , 0x8e, 0x01, }, }; static struct tuner_params tuner_temic_pal_params[] = { @@ -46,16 +49,15 @@ static struct tuner_params tuner_temic_pal_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_pal_ranges, .count = ARRAY_SIZE(tuner_temic_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_PAL_I - Philips PAL_I ------------ */ static struct tuner_range tuner_philips_pal_i_ranges[] = { - { 16 * 140.25 /*MHz*/, 0xa0, }, - { 16 * 463.25 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 140.25 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 463.25 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_philips_pal_i_params[] = { @@ -63,16 +65,15 @@ static struct tuner_params tuner_philips_pal_i_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_philips_pal_i_ranges, .count = ARRAY_SIZE(tuner_philips_pal_i_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_NTSC - Philips NTSC ------------ */ static struct tuner_range tuner_philips_ntsc_ranges[] = { - { 16 * 157.25 /*MHz*/, 0xa0, }, - { 16 * 451.25 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 157.25 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 451.25 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_philips_ntsc_params[] = { @@ -80,7 +81,6 @@ static struct tuner_params tuner_philips_ntsc_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_philips_ntsc_ranges, .count = ARRAY_SIZE(tuner_philips_ntsc_ranges), - .config = 0x8e, .cb_first_if_lower_freq = 1, }, }; @@ -88,9 +88,9 @@ static struct tuner_params tuner_philips_ntsc_params[] = { /* ------------ TUNER_PHILIPS_SECAM - Philips SECAM ------------ */ static struct tuner_range tuner_philips_secam_ranges[] = { - { 16 * 168.25 /*MHz*/, 0xa7, }, - { 16 * 447.25 /*MHz*/, 0x97, }, - { 16 * 999.99 , 0x37, }, + { 16 * 168.25 /*MHz*/, 0x8e, 0xa7, }, + { 16 * 447.25 /*MHz*/, 0x8e, 0x97, }, + { 16 * 999.99 , 0x8e, 0x37, }, }; static struct tuner_params tuner_philips_secam_params[] = { @@ -98,7 +98,6 @@ static struct tuner_params tuner_philips_secam_params[] = { .type = TUNER_PARAM_TYPE_SECAM, .ranges = tuner_philips_secam_ranges, .count = ARRAY_SIZE(tuner_philips_secam_ranges), - .config = 0x8e, .cb_first_if_lower_freq = 1, }, }; @@ -106,9 +105,9 @@ static struct tuner_params tuner_philips_secam_params[] = { /* ------------ TUNER_PHILIPS_PAL - Philips PAL ------------ */ static struct tuner_range tuner_philips_pal_ranges[] = { - { 16 * 168.25 /*MHz*/, 0xa0, }, - { 16 * 447.25 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 168.25 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 447.25 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_philips_pal_params[] = { @@ -116,7 +115,6 @@ static struct tuner_params tuner_philips_pal_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_philips_pal_ranges, .count = ARRAY_SIZE(tuner_philips_pal_ranges), - .config = 0x8e, .cb_first_if_lower_freq = 1, }, }; @@ -124,9 +122,9 @@ static struct tuner_params tuner_philips_pal_params[] = { /* ------------ TUNER_TEMIC_NTSC - TEMIC NTSC ------------ */ static struct tuner_range tuner_temic_ntsc_ranges[] = { - { 16 * 157.25 /*MHz*/, 0x02, }, - { 16 * 463.25 /*MHz*/, 0x04, }, - { 16 * 999.99 , 0x01, }, + { 16 * 157.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 463.25 /*MHz*/, 0x8e, 0x04, }, + { 16 * 999.99 , 0x8e, 0x01, }, }; static struct tuner_params tuner_temic_ntsc_params[] = { @@ -134,16 +132,15 @@ static struct tuner_params tuner_temic_ntsc_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_temic_ntsc_ranges, .count = ARRAY_SIZE(tuner_temic_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TEMIC_PAL_I - TEMIC PAL_I ------------ */ static struct tuner_range tuner_temic_pal_i_ranges[] = { - { 16 * 170.00 /*MHz*/, 0x02, }, - { 16 * 450.00 /*MHz*/, 0x04, }, - { 16 * 999.99 , 0x01, }, + { 16 * 170.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 450.00 /*MHz*/, 0x8e, 0x04, }, + { 16 * 999.99 , 0x8e, 0x01, }, }; static struct tuner_params tuner_temic_pal_i_params[] = { @@ -151,16 +148,15 @@ static struct tuner_params tuner_temic_pal_i_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_pal_i_ranges, .count = ARRAY_SIZE(tuner_temic_pal_i_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TEMIC_4036FY5_NTSC - TEMIC NTSC ------------ */ static struct tuner_range tuner_temic_4036fy5_ntsc_ranges[] = { - { 16 * 157.25 /*MHz*/, 0xa0, }, - { 16 * 463.25 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 157.25 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 463.25 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_temic_4036fy5_ntsc_params[] = { @@ -168,16 +164,15 @@ static struct tuner_params tuner_temic_4036fy5_ntsc_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_temic_4036fy5_ntsc_ranges, .count = ARRAY_SIZE(tuner_temic_4036fy5_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_ALPS_TSBH1_NTSC - TEMIC NTSC ------------ */ static struct tuner_range tuner_alps_tsb_1_ranges[] = { - { 16 * 137.25 /*MHz*/, 0x01, }, - { 16 * 385.25 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 137.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 385.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, }; static struct tuner_params tuner_alps_tsbh1_ntsc_params[] = { @@ -185,7 +180,6 @@ static struct tuner_params tuner_alps_tsbh1_ntsc_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_alps_tsb_1_ranges, .count = ARRAY_SIZE(tuner_alps_tsb_1_ranges), - .config = 0x8e, }, }; @@ -197,16 +191,15 @@ static struct tuner_params tuner_alps_tsb_1_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_alps_tsb_1_ranges, .count = ARRAY_SIZE(tuner_alps_tsb_1_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_ALPS_TSBB5_PAL_I - Alps PAL_I ------------ */ static struct tuner_range tuner_alps_tsb_5_pal_ranges[] = { - { 16 * 133.25 /*MHz*/, 0x01, }, - { 16 * 351.25 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 133.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 351.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, }; static struct tuner_params tuner_alps_tsbb5_params[] = { @@ -214,7 +207,6 @@ static struct tuner_params tuner_alps_tsbb5_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_alps_tsb_5_pal_ranges, .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges), - .config = 0x8e, }, }; @@ -225,7 +217,6 @@ static struct tuner_params tuner_alps_tsbe5_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_alps_tsb_5_pal_ranges, .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges), - .config = 0x8e, }, }; @@ -236,33 +227,31 @@ static struct tuner_params tuner_alps_tsbc5_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_alps_tsb_5_pal_ranges, .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TEMIC_4006FH5_PAL - TEMIC PAL ------------ */ -static struct tuner_range tuner_temic_4006fh5_pal_ranges[] = { - { 16 * 170.00 /*MHz*/, 0xa0, }, - { 16 * 450.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, +static struct tuner_range tuner_lg_pal_ranges[] = { + { 16 * 170.00 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 450.00 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_temic_4006fh5_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_temic_4006fh5_pal_ranges, - .count = ARRAY_SIZE(tuner_temic_4006fh5_pal_ranges), - .config = 0x8e, + .ranges = tuner_lg_pal_ranges, + .count = ARRAY_SIZE(tuner_lg_pal_ranges), }, }; /* ------------ TUNER_ALPS_TSHC6_NTSC - Alps NTSC ------------ */ static struct tuner_range tuner_alps_tshc6_ntsc_ranges[] = { - { 16 * 137.25 /*MHz*/, 0x14, }, - { 16 * 385.25 /*MHz*/, 0x12, }, - { 16 * 999.99 , 0x11, }, + { 16 * 137.25 /*MHz*/, 0x8e, 0x14, }, + { 16 * 385.25 /*MHz*/, 0x8e, 0x12, }, + { 16 * 999.99 , 0x8e, 0x11, }, }; static struct tuner_params tuner_alps_tshc6_params[] = { @@ -270,16 +259,15 @@ static struct tuner_params tuner_alps_tshc6_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_alps_tshc6_ntsc_ranges, .count = ARRAY_SIZE(tuner_alps_tshc6_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TEMIC_PAL_DK - TEMIC PAL ------------ */ static struct tuner_range tuner_temic_pal_dk_ranges[] = { - { 16 * 168.25 /*MHz*/, 0xa0, }, - { 16 * 456.25 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 168.25 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 456.25 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_temic_pal_dk_params[] = { @@ -287,16 +275,15 @@ static struct tuner_params tuner_temic_pal_dk_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_pal_dk_ranges, .count = ARRAY_SIZE(tuner_temic_pal_dk_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_NTSC_M - Philips NTSC ------------ */ static struct tuner_range tuner_philips_ntsc_m_ranges[] = { - { 16 * 160.00 /*MHz*/, 0xa0, }, - { 16 * 454.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 160.00 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 454.00 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_philips_ntsc_m_params[] = { @@ -304,16 +291,15 @@ static struct tuner_params tuner_philips_ntsc_m_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_philips_ntsc_m_ranges, .count = ARRAY_SIZE(tuner_philips_ntsc_m_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TEMIC_4066FY5_PAL_I - TEMIC PAL_I ------------ */ static struct tuner_range tuner_temic_40x6f_5_pal_ranges[] = { - { 16 * 169.00 /*MHz*/, 0xa0, }, - { 16 * 454.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 169.00 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 454.00 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_temic_4066fy5_pal_i_params[] = { @@ -321,7 +307,6 @@ static struct tuner_params tuner_temic_4066fy5_pal_i_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_40x6f_5_pal_ranges, .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges), - .config = 0x8e, }, }; @@ -332,7 +317,6 @@ static struct tuner_params tuner_temic_4006fn5_multi_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_40x6f_5_pal_ranges, .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges), - .config = 0x8e, }, }; @@ -340,9 +324,9 @@ static struct tuner_params tuner_temic_4006fn5_multi_params[] = { /* ------------ TUNER_TEMIC_4009FR5_PAL - TEMIC PAL ------------ */ static struct tuner_range tuner_temic_4009f_5_pal_ranges[] = { - { 16 * 141.00 /*MHz*/, 0xa0, }, - { 16 * 464.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 141.00 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 464.00 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_temic_4009f_5_params[] = { @@ -350,58 +334,42 @@ static struct tuner_params tuner_temic_4009f_5_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_4009f_5_pal_ranges, .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TEMIC_4039FR5_NTSC - TEMIC NTSC ------------ */ -static struct tuner_range tuner_temic_4039fr5_ntsc_ranges[] = { - { 16 * 158.00 /*MHz*/, 0xa0, }, - { 16 * 453.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, +static struct tuner_range tuner_temic_4x3x_f_5_ntsc_ranges[] = { + { 16 * 158.00 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 453.00 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_temic_4039fr5_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_temic_4039fr5_ntsc_ranges, - .count = ARRAY_SIZE(tuner_temic_4039fr5_ntsc_ranges), - .config = 0x8e, + .ranges = tuner_temic_4x3x_f_5_ntsc_ranges, + .count = ARRAY_SIZE(tuner_temic_4x3x_f_5_ntsc_ranges), }, }; /* ------------ TUNER_TEMIC_4046FM5 - TEMIC PAL ------------ */ -static struct tuner_range tuner_temic_4046fm5_pal_ranges[] = { - { 16 * 169.00 /*MHz*/, 0xa0, }, - { 16 * 454.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, -}; - static struct tuner_params tuner_temic_4046fm5_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_temic_4046fm5_pal_ranges, - .count = ARRAY_SIZE(tuner_temic_4046fm5_pal_ranges), - .config = 0x8e, + .ranges = tuner_temic_40x6f_5_pal_ranges, + .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges), }, }; /* ------------ TUNER_PHILIPS_PAL_DK - Philips PAL ------------ */ -static struct tuner_range tuner_lg_pal_ranges[] = { - { 16 * 170.00 /*MHz*/, 0xa0, }, - { 16 * 450.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, -}; - static struct tuner_params tuner_philips_pal_dk_params[] = { { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_lg_pal_ranges, .count = ARRAY_SIZE(tuner_lg_pal_ranges), - .config = 0x8e, }, }; @@ -412,7 +380,6 @@ static struct tuner_params tuner_philips_fq1216me_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_lg_pal_ranges, .count = ARRAY_SIZE(tuner_lg_pal_ranges), - .config = 0x8e, }, }; @@ -423,7 +390,6 @@ static struct tuner_params tuner_lg_pal_i_fm_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_lg_pal_ranges, .count = ARRAY_SIZE(tuner_lg_pal_ranges), - .config = 0x8e, }, }; @@ -434,16 +400,15 @@ static struct tuner_params tuner_lg_pal_i_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_lg_pal_ranges, .count = ARRAY_SIZE(tuner_lg_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_LG_NTSC_FM - LGINNOTEK NTSC ------------ */ static struct tuner_range tuner_lg_ntsc_fm_ranges[] = { - { 16 * 210.00 /*MHz*/, 0xa0, }, - { 16 * 497.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 210.00 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 497.00 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_lg_ntsc_fm_params[] = { @@ -451,7 +416,6 @@ static struct tuner_params tuner_lg_ntsc_fm_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_lg_ntsc_fm_ranges, .count = ARRAY_SIZE(tuner_lg_ntsc_fm_ranges), - .config = 0x8e, }, }; @@ -462,7 +426,6 @@ static struct tuner_params tuner_lg_pal_fm_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_lg_pal_ranges, .count = ARRAY_SIZE(tuner_lg_pal_ranges), - .config = 0x8e, }, }; @@ -473,7 +436,6 @@ static struct tuner_params tuner_lg_pal_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_lg_pal_ranges, .count = ARRAY_SIZE(tuner_lg_pal_ranges), - .config = 0x8e, }, }; @@ -485,16 +447,15 @@ static struct tuner_params tuner_temic_4009_fn5_multi_pal_fm_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_4009f_5_pal_ranges, .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_SHARP_2U5JF5540_NTSC - SHARP NTSC ------------ */ static struct tuner_range tuner_sharp_2u5jf5540_ntsc_ranges[] = { - { 16 * 137.25 /*MHz*/, 0x01, }, - { 16 * 317.25 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 137.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 317.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, }; static struct tuner_params tuner_sharp_2u5jf5540_params[] = { @@ -502,16 +463,15 @@ static struct tuner_params tuner_sharp_2u5jf5540_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_sharp_2u5jf5540_ntsc_ranges, .count = ARRAY_SIZE(tuner_sharp_2u5jf5540_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_Samsung_PAL_TCPM9091PD27 - Samsung PAL ------------ */ static struct tuner_range tuner_samsung_pal_tcpm9091pd27_ranges[] = { - { 16 * 169 /*MHz*/, 0xa0, }, - { 16 * 464 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 169 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 464 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_samsung_pal_tcpm9091pd27_params[] = { @@ -519,7 +479,6 @@ static struct tuner_params tuner_samsung_pal_tcpm9091pd27_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_samsung_pal_tcpm9091pd27_ranges, .count = ARRAY_SIZE(tuner_samsung_pal_tcpm9091pd27_ranges), - .config = 0x8e, }, }; @@ -530,50 +489,35 @@ static struct tuner_params tuner_temic_4106fh5_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_4009f_5_pal_ranges, .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TEMIC_4012FY5 - TEMIC PAL ------------ */ -static struct tuner_range tuner_temic_4012fy5_pal_ranges[] = { - { 16 * 140.25 /*MHz*/, 0x02, }, - { 16 * 463.25 /*MHz*/, 0x04, }, - { 16 * 999.99 , 0x01, }, -}; - static struct tuner_params tuner_temic_4012fy5_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_temic_4012fy5_pal_ranges, - .count = ARRAY_SIZE(tuner_temic_4012fy5_pal_ranges), - .config = 0x8e, + .ranges = tuner_temic_pal_ranges, + .count = ARRAY_SIZE(tuner_temic_pal_ranges), }, }; /* ------------ TUNER_TEMIC_4136FY5 - TEMIC NTSC ------------ */ -static struct tuner_range tuner_temic_4136_fy5_ntsc_ranges[] = { - { 16 * 158.00 /*MHz*/, 0xa0, }, - { 16 * 453.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, -}; - static struct tuner_params tuner_temic_4136_fy5_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_temic_4136_fy5_ntsc_ranges, - .count = ARRAY_SIZE(tuner_temic_4136_fy5_ntsc_ranges), - .config = 0x8e, + .ranges = tuner_temic_4x3x_f_5_ntsc_ranges, + .count = ARRAY_SIZE(tuner_temic_4x3x_f_5_ntsc_ranges), }, }; /* ------------ TUNER_LG_PAL_NEW_TAPC - LGINNOTEK PAL ------------ */ static struct tuner_range tuner_lg_new_tapc_ranges[] = { - { 16 * 170.00 /*MHz*/, 0x01, }, - { 16 * 450.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 170.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 450.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, }; static struct tuner_params tuner_lg_pal_new_tapc_params[] = { @@ -581,16 +525,15 @@ static struct tuner_params tuner_lg_pal_new_tapc_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_lg_new_tapc_ranges, .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_FM1216ME_MK3 - Philips PAL ------------ */ static struct tuner_range tuner_fm1216me_mk3_pal_ranges[] = { - { 16 * 158.00 /*MHz*/, 0x01, }, - { 16 * 442.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, + { 16 * 158.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 442.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x04, }, }; static struct tuner_params tuner_fm1216me_mk3_params[] = { @@ -598,7 +541,6 @@ static struct tuner_params tuner_fm1216me_mk3_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_fm1216me_mk3_pal_ranges, .count = ARRAY_SIZE(tuner_fm1216me_mk3_pal_ranges), - .config = 0x8e, .cb_first_if_lower_freq = 1, }, }; @@ -610,7 +552,6 @@ static struct tuner_params tuner_lg_ntsc_new_tapc_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_lg_new_tapc_ranges, .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges), - .config = 0x8e, }, }; @@ -622,16 +563,15 @@ static struct tuner_params tuner_hitachi_ntsc_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_lg_new_tapc_ranges, .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_PAL_MK - Philips PAL ------------ */ static struct tuner_range tuner_philips_pal_mk_pal_ranges[] = { - { 16 * 140.25 /*MHz*/, 0x01, }, - { 16 * 463.25 /*MHz*/, 0xc2, }, - { 16 * 999.99 , 0xcf, }, + { 16 * 140.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 463.25 /*MHz*/, 0x8e, 0xc2, }, + { 16 * 999.99 , 0x8e, 0xcf, }, }; static struct tuner_params tuner_philips_pal_mk_params[] = { @@ -639,16 +579,15 @@ static struct tuner_params tuner_philips_pal_mk_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_philips_pal_mk_pal_ranges, .count = ARRAY_SIZE(tuner_philips_pal_mk_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_ATSC - Philips ATSC ------------ */ static struct tuner_range tuner_philips_atsc_ranges[] = { - { 16 * 157.25 /*MHz*/, 0xa0, }, - { 16 * 454.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 157.25 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 454.00 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_philips_atsc_params[] = { @@ -656,16 +595,15 @@ static struct tuner_params tuner_philips_atsc_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_philips_atsc_ranges, .count = ARRAY_SIZE(tuner_philips_atsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_FM1236_MK3 - Philips NTSC ------------ */ static struct tuner_range tuner_fm1236_mk3_ntsc_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01, }, - { 16 * 442.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, + { 16 * 160.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 442.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x04, }, }; static struct tuner_params tuner_fm1236_mk3_params[] = { @@ -673,25 +611,17 @@ static struct tuner_params tuner_fm1236_mk3_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_fm1236_mk3_ntsc_ranges, .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges), - .config = 0x8e, .cb_first_if_lower_freq = 1, }, }; /* ------------ TUNER_PHILIPS_4IN1 - Philips NTSC ------------ */ -static struct tuner_range tuner_philips_4in1_ntsc_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01, }, - { 16 * 442.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, -}; - static struct tuner_params tuner_philips_4in1_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_philips_4in1_ntsc_ranges, - .count = ARRAY_SIZE(tuner_philips_4in1_ntsc_ranges), - .config = 0x8e, + .ranges = tuner_fm1236_mk3_ntsc_ranges, + .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges), }, }; @@ -702,16 +632,15 @@ static struct tuner_params tuner_microtune_4049_fm5_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_temic_4009f_5_pal_ranges, .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PANASONIC_VP27 - Panasonic NTSC ------------ */ static struct tuner_range tuner_panasonic_vp27_ntsc_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01, }, - { 16 * 454.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 160.00 /*MHz*/, 0xce, 0x01, }, + { 16 * 454.00 /*MHz*/, 0xce, 0x02, }, + { 16 * 999.99 , 0xce, 0x08, }, }; static struct tuner_params tuner_panasonic_vp27_params[] = { @@ -719,33 +648,25 @@ static struct tuner_params tuner_panasonic_vp27_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_panasonic_vp27_ntsc_ranges, .count = ARRAY_SIZE(tuner_panasonic_vp27_ntsc_ranges), - .config = 0xce, }, }; /* ------------ TUNER_LG_NTSC_TAPE - LGINNOTEK NTSC ------------ */ -static struct tuner_range tuner_lg_ntsc_tape_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01, }, - { 16 * 442.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, -}; - static struct tuner_params tuner_lg_ntsc_tape_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_lg_ntsc_tape_ranges, - .count = ARRAY_SIZE(tuner_lg_ntsc_tape_ranges), - .config = 0x8e, + .ranges = tuner_fm1236_mk3_ntsc_ranges, + .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges), }, }; /* ------------ TUNER_TNF_8831BGFF - Philips PAL ------------ */ static struct tuner_range tuner_tnf_8831bgff_pal_ranges[] = { - { 16 * 161.25 /*MHz*/, 0xa0, }, - { 16 * 463.25 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, + { 16 * 161.25 /*MHz*/, 0x8e, 0xa0, }, + { 16 * 463.25 /*MHz*/, 0x8e, 0x90, }, + { 16 * 999.99 , 0x8e, 0x30, }, }; static struct tuner_params tuner_tnf_8831bgff_params[] = { @@ -753,16 +674,15 @@ static struct tuner_params tuner_tnf_8831bgff_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_tnf_8831bgff_pal_ranges, .count = ARRAY_SIZE(tuner_tnf_8831bgff_pal_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_MICROTUNE_4042FI5 - Microtune NTSC ------------ */ static struct tuner_range tuner_microtune_4042fi5_ntsc_ranges[] = { - { 16 * 162.00 /*MHz*/, 0xa2, }, - { 16 * 457.00 /*MHz*/, 0x94, }, - { 16 * 999.99 , 0x31, }, + { 16 * 162.00 /*MHz*/, 0x8e, 0xa2, }, + { 16 * 457.00 /*MHz*/, 0x8e, 0x94, }, + { 16 * 999.99 , 0x8e, 0x31, }, }; static struct tuner_params tuner_microtune_4042fi5_params[] = { @@ -770,7 +690,6 @@ static struct tuner_params tuner_microtune_4042fi5_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_microtune_4042fi5_ntsc_ranges, .count = ARRAY_SIZE(tuner_microtune_4042fi5_ntsc_ranges), - .config = 0x8e, }, }; @@ -778,9 +697,9 @@ static struct tuner_params tuner_microtune_4042fi5_params[] = { /* ------------ TUNER_TCL_2002N - TCL NTSC ------------ */ static struct tuner_range tuner_tcl_2002n_ntsc_ranges[] = { - { 16 * 172.00 /*MHz*/, 0x01, }, - { 16 * 448.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 172.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 448.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, }; static struct tuner_params tuner_tcl_2002n_params[] = { @@ -788,34 +707,26 @@ static struct tuner_params tuner_tcl_2002n_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_tcl_2002n_ntsc_ranges, .count = ARRAY_SIZE(tuner_tcl_2002n_ntsc_ranges), - .config = 0x8e, .cb_first_if_lower_freq = 1, }, }; /* ------------ TUNER_PHILIPS_FM1256_IH3 - Philips PAL ------------ */ -static struct tuner_range tuner_philips_fm1256_ih3_pal_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01, }, - { 16 * 442.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, -}; - static struct tuner_params tuner_philips_fm1256_ih3_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_philips_fm1256_ih3_pal_ranges, - .count = ARRAY_SIZE(tuner_philips_fm1256_ih3_pal_ranges), - .config = 0x8e, + .ranges = tuner_fm1236_mk3_ntsc_ranges, + .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges), }, }; /* ------------ TUNER_THOMSON_DTT7610 - THOMSON ATSC ------------ */ static struct tuner_range tuner_thomson_dtt7610_ntsc_ranges[] = { - { 16 * 157.25 /*MHz*/, 0x39, }, - { 16 * 454.00 /*MHz*/, 0x3a, }, - { 16 * 999.99 , 0x3c, }, + { 16 * 157.25 /*MHz*/, 0x8e, 0x39, }, + { 16 * 454.00 /*MHz*/, 0x8e, 0x3a, }, + { 16 * 999.99 , 0x8e, 0x3c, }, }; static struct tuner_params tuner_thomson_dtt7610_params[] = { @@ -823,16 +734,15 @@ static struct tuner_params tuner_thomson_dtt7610_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_thomson_dtt7610_ntsc_ranges, .count = ARRAY_SIZE(tuner_thomson_dtt7610_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_PHILIPS_FQ1286 - Philips NTSC ------------ */ static struct tuner_range tuner_philips_fq1286_ntsc_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x41, }, - { 16 * 454.00 /*MHz*/, 0x42, }, - { 16 * 999.99 , 0x04, }, + { 16 * 160.00 /*MHz*/, 0x8e, 0x41, }, + { 16 * 454.00 /*MHz*/, 0x8e, 0x42, }, + { 16 * 999.99 , 0x8e, 0x04, }, }; static struct tuner_params tuner_philips_fq1286_params[] = { @@ -840,16 +750,15 @@ static struct tuner_params tuner_philips_fq1286_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_philips_fq1286_ntsc_ranges, .count = ARRAY_SIZE(tuner_philips_fq1286_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TCL_2002MB - TCL PAL ------------ */ static struct tuner_range tuner_tcl_2002mb_pal_ranges[] = { - { 16 * 170.00 /*MHz*/, 0x01, }, - { 16 * 450.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 170.00 /*MHz*/, 0xce, 0x01, }, + { 16 * 450.00 /*MHz*/, 0xce, 0x02, }, + { 16 * 999.99 , 0xce, 0x08, }, }; static struct tuner_params tuner_tcl_2002mb_params[] = { @@ -857,24 +766,22 @@ static struct tuner_params tuner_tcl_2002mb_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_tcl_2002mb_pal_ranges, .count = ARRAY_SIZE(tuner_tcl_2002mb_pal_ranges), - .config = 0xce, }, }; /* ------------ TUNER_PHILIPS_FQ1216AME_MK4 - Philips PAL ------------ */ -static struct tuner_range tuner_philips_fq12_6a___mk4_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01, }, - { 16 * 442.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, +static struct tuner_range tuner_philips_fq12_6a___mk4_pal_ranges[] = { + { 16 * 160.00 /*MHz*/, 0xce, 0x01, }, + { 16 * 442.00 /*MHz*/, 0xce, 0x02, }, + { 16 * 999.99 , 0xce, 0x04, }, }; static struct tuner_params tuner_philips_fq1216ame_mk4_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_philips_fq12_6a___mk4_ranges, - .count = ARRAY_SIZE(tuner_philips_fq12_6a___mk4_ranges), - .config = 0xce, + .ranges = tuner_philips_fq12_6a___mk4_pal_ranges, + .count = ARRAY_SIZE(tuner_philips_fq12_6a___mk4_pal_ranges), }, }; @@ -883,35 +790,27 @@ static struct tuner_params tuner_philips_fq1216ame_mk4_params[] = { static struct tuner_params tuner_philips_fq1236a_mk4_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_philips_fq12_6a___mk4_ranges, - .count = ARRAY_SIZE(tuner_philips_fq12_6a___mk4_ranges), - .config = 0x8e, + .ranges = tuner_fm1236_mk3_ntsc_ranges, + .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges), }, }; /* ------------ TUNER_YMEC_TVF_8531MF - Philips NTSC ------------ */ -static struct tuner_range tuner_ymec_tvf_8531mf_ntsc_ranges[] = { - { 16 * 160.00 /*MHz*/, 0xa0, }, - { 16 * 454.00 /*MHz*/, 0x90, }, - { 16 * 999.99 , 0x30, }, -}; - static struct tuner_params tuner_ymec_tvf_8531mf_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_ymec_tvf_8531mf_ntsc_ranges, - .count = ARRAY_SIZE(tuner_ymec_tvf_8531mf_ntsc_ranges), - .config = 0x8e, + .ranges = tuner_philips_ntsc_m_ranges, + .count = ARRAY_SIZE(tuner_philips_ntsc_m_ranges), }, }; /* ------------ TUNER_YMEC_TVF_5533MF - Philips NTSC ------------ */ static struct tuner_range tuner_ymec_tvf_5533mf_ntsc_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01, }, - { 16 * 454.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, + { 16 * 160.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 454.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x04, }, }; static struct tuner_params tuner_ymec_tvf_5533mf_params[] = { @@ -919,7 +818,6 @@ static struct tuner_params tuner_ymec_tvf_5533mf_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_ymec_tvf_5533mf_ntsc_ranges, .count = ARRAY_SIZE(tuner_ymec_tvf_5533mf_ntsc_ranges), - .config = 0x8e, }, }; @@ -928,9 +826,9 @@ static struct tuner_params tuner_ymec_tvf_5533mf_params[] = { /* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */ static struct tuner_range tuner_thomson_dtt761x_ntsc_ranges[] = { - { 16 * 145.25 /*MHz*/, 0x39, }, - { 16 * 415.25 /*MHz*/, 0x3a, }, - { 16 * 999.99 , 0x3c, }, + { 16 * 145.25 /*MHz*/, 0x8e, 0x39, }, + { 16 * 415.25 /*MHz*/, 0x8e, 0x3a, }, + { 16 * 999.99 , 0x8e, 0x3c, }, }; @@ -939,42 +837,39 @@ static struct tuner_params tuner_thomson_dtt761x_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_thomson_dtt761x_ntsc_ranges, .count = ARRAY_SIZE(tuner_thomson_dtt761x_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_TENA_9533_DI - Philips PAL ------------ */ -static struct tuner_range tuner_tuner_tena_9533_di_pal_ranges[] = { - { 16 * 160.25 /*MHz*/, 0x01, }, - { 16 * 464.25 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, +static struct tuner_range tuner_tena_9533_di_pal_ranges[] = { + { 16 * 160.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 464.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x04, }, }; static struct tuner_params tuner_tena_9533_di_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_tuner_tena_9533_di_pal_ranges, - .count = ARRAY_SIZE(tuner_tuner_tena_9533_di_pal_ranges), - .config = 0x8e, + .ranges = tuner_tena_9533_di_pal_ranges, + .count = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges), }, }; /* ------------ TUNER_PHILIPS_FMD1216ME_MK3 - Philips PAL ------------ */ static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x51, }, - { 16 * 442.00 /*MHz*/, 0x52, }, - { 16 * 999.99 , 0x54, }, + { 16 * 160.00 /*MHz*/, 0x86, 0x51, }, + { 16 * 442.00 /*MHz*/, 0x86, 0x52, }, + { 16 * 999.99 , 0x86, 0x54, }, }; -static struct tuner_params tuner_tuner_philips_fmd1216me_mk3_params[] = { +static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = { { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_philips_fmd1216me_mk3_pal_ranges, .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges), - .config = 0x86, }, }; @@ -982,9 +877,9 @@ static struct tuner_params tuner_tuner_philips_fmd1216me_mk3_params[] = { /* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */ static struct tuner_range tuner_tua6034_ntsc_ranges[] = { - { 16 * 160.00 /*MHz*/, 0x01 }, - { 16 * 455.00 /*MHz*/, 0x02 }, - { 16 * 999.99 , 0x04 }, + { 16 * 160.00 /*MHz*/, 0x8e, 0x01 }, + { 16 * 455.00 /*MHz*/, 0x8e, 0x02 }, + { 16 * 999.99 , 0x8e, 0x04 }, }; @@ -993,50 +888,51 @@ static struct tuner_params tuner_tua6034_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_tua6034_ntsc_ranges, .count = ARRAY_SIZE(tuner_tua6034_ntsc_ranges), - .config = 0x8e, }, }; /* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */ -static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = { - { 16 * 160.25 /*MHz*/, 0x01, }, - { 16 * 464.25 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, -}; - static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges, - .count = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges), - .config = 0x8e, + .ranges = tuner_tena_9533_di_pal_ranges, + .count = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges), }, }; /* ------------ TUNER_LG_NTSC_TALN_MINI - LGINNOTEK NTSC ------------ */ -static struct tuner_range tuner_lg_taln_mini_ntsc_ranges[] = { - { 16 * 137.25 /*MHz*/, 0x01, }, - { 16 * 373.25 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, +static struct tuner_range tuner_lg_taln_ntsc_ranges[] = { + { 16 * 137.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 373.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, +}; + +static struct tuner_range tuner_lg_taln_pal_secam_ranges[] = { + { 16 * 150.00 /*MHz*/, 0x8e, 0x01, }, + { 16 * 425.00 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, }; -static struct tuner_params tuner_lg_taln_mini_params[] = { +static struct tuner_params tuner_lg_taln_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, - .ranges = tuner_lg_taln_mini_ntsc_ranges, - .count = ARRAY_SIZE(tuner_lg_taln_mini_ntsc_ranges), - .config = 0x8e, + .ranges = tuner_lg_taln_ntsc_ranges, + .count = ARRAY_SIZE(tuner_lg_taln_ntsc_ranges), + },{ + .type = TUNER_PARAM_TYPE_PAL, + .ranges = tuner_lg_taln_pal_secam_ranges, + .count = ARRAY_SIZE(tuner_lg_taln_pal_secam_ranges), }, }; /* ------------ TUNER_PHILIPS_TD1316 - Philips PAL ------------ */ static struct tuner_range tuner_philips_td1316_pal_ranges[] = { - { 16 * 160.00 /*MHz*/, 0xa1, }, - { 16 * 442.00 /*MHz*/, 0xa2, }, - { 16 * 999.99 , 0xa4, }, + { 16 * 160.00 /*MHz*/, 0xc8, 0xa1, }, + { 16 * 442.00 /*MHz*/, 0xc8, 0xa2, }, + { 16 * 999.99 , 0xc8, 0xa4, }, }; static struct tuner_params tuner_philips_td1316_params[] = { @@ -1044,34 +940,42 @@ static struct tuner_params tuner_philips_td1316_params[] = { .type = TUNER_PARAM_TYPE_PAL, .ranges = tuner_philips_td1316_pal_ranges, .count = ARRAY_SIZE(tuner_philips_td1316_pal_ranges), - .config = 0xc8, }, }; /* ------------ TUNER_PHILIPS_TUV1236D - Philips ATSC ------------ */ static struct tuner_range tuner_tuv1236d_ntsc_ranges[] = { - { 16 * 157.25 /*MHz*/, 0x01, }, - { 16 * 454.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, + { 16 * 157.25 /*MHz*/, 0xce, 0x01, }, + { 16 * 454.00 /*MHz*/, 0xce, 0x02, }, + { 16 * 999.99 , 0xce, 0x04, }, }; -static struct tuner_params tuner_tuner_tuv1236d_params[] = { +static struct tuner_params tuner_tuv1236d_params[] = { { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_tuv1236d_ntsc_ranges, .count = ARRAY_SIZE(tuner_tuv1236d_ntsc_ranges), - .config = 0xce, }, }; -/* ------------ TUNER_TNF_5335MF - Philips NTSC ------------ */ +/* ------------ TUNER_TNF_xxx5 - Texas Instruments--------- */ +/* This is known to work with Tenna TVF58t5-MFF and TVF5835 MFF + * but it is expected to work also with other Tenna/Ymec + * models based on TI SN 761677 chip on both PAL and NTSC + */ + +static struct tuner_range tuner_tnf_5335_d_if_pal_ranges[] = { + { 16 * 168.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 471.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, +}; static struct tuner_range tuner_tnf_5335mf_ntsc_ranges[] = { - { 16 * 157.25 /*MHz*/, 0x01, }, - { 16 * 454.00 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x04, }, + { 16 * 169.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 469.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, }; static struct tuner_params tuner_tnf_5335mf_params[] = { @@ -1079,7 +983,11 @@ static struct tuner_params tuner_tnf_5335mf_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_tnf_5335mf_ntsc_ranges, .count = ARRAY_SIZE(tuner_tnf_5335mf_ntsc_ranges), - .config = 0x8e, + }, + { + .type = TUNER_PARAM_TYPE_PAL, + .ranges = tuner_tnf_5335_d_if_pal_ranges, + .count = ARRAY_SIZE(tuner_tnf_5335_d_if_pal_ranges), }, }; @@ -1087,9 +995,9 @@ static struct tuner_params tuner_tnf_5335mf_params[] = { /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */ static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = { - { 16 * 175.75 /*MHz*/, 0x01, }, - { 16 * 410.25 /*MHz*/, 0x02, }, - { 16 * 999.99 , 0x08, }, + { 16 * 130.00 /*MHz*/, 0xce, 0x01, }, + { 16 * 364.50 /*MHz*/, 0xce, 0x02, }, + { 16 * 999.99 , 0xce, 0x08, }, }; static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = { @@ -1097,7 +1005,22 @@ static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = { .type = TUNER_PARAM_TYPE_NTSC, .ranges = tuner_samsung_tcpn_2121p30a_ntsc_ranges, .count = ARRAY_SIZE(tuner_samsung_tcpn_2121p30a_ntsc_ranges), - .config = 0xce, + }, +}; + +/* ------------ TUNER_THOMSON_FE6600 - DViCO Hybrid PAL ------------ */ + +static struct tuner_range tuner_thomson_fe6600_ranges[] = { + { 16 * 160.00 /*MHz*/, 0xfe, 0x11, }, + { 16 * 442.00 /*MHz*/, 0xf6, 0x12, }, + { 16 * 999.99 , 0xf6, 0x18, }, +}; + +static struct tuner_params tuner_thomson_fe6600_params[] = { + { + .type = TUNER_PARAM_TYPE_PAL, + .ranges = tuner_thomson_fe6600_ranges, + .count = ARRAY_SIZE(tuner_thomson_fe6600_ranges), }, }; @@ -1108,18 +1031,22 @@ struct tunertype tuners[] = { [TUNER_TEMIC_PAL] = { /* TEMIC PAL */ .name = "Temic PAL (4002 FH5)", .params = tuner_temic_pal_params, + .count = ARRAY_SIZE(tuner_temic_pal_params), }, [TUNER_PHILIPS_PAL_I] = { /* Philips PAL_I */ .name = "Philips PAL_I (FI1246 and compatibles)", .params = tuner_philips_pal_i_params, + .count = ARRAY_SIZE(tuner_philips_pal_i_params), }, [TUNER_PHILIPS_NTSC] = { /* Philips NTSC */ .name = "Philips NTSC (FI1236,FM1236 and compatibles)", .params = tuner_philips_ntsc_params, + .count = ARRAY_SIZE(tuner_philips_ntsc_params), }, [TUNER_PHILIPS_SECAM] = { /* Philips SECAM */ .name = "Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)", .params = tuner_philips_secam_params, + .count = ARRAY_SIZE(tuner_philips_secam_params), }, [TUNER_ABSENT] = { /* Tuner Absent */ .name = "NoTuner", @@ -1127,120 +1054,148 @@ struct tunertype tuners[] = { [TUNER_PHILIPS_PAL] = { /* Philips PAL */ .name = "Philips PAL_BG (FI1216 and compatibles)", .params = tuner_philips_pal_params, + .count = ARRAY_SIZE(tuner_philips_pal_params), }, [TUNER_TEMIC_NTSC] = { /* TEMIC NTSC */ .name = "Temic NTSC (4032 FY5)", .params = tuner_temic_ntsc_params, + .count = ARRAY_SIZE(tuner_temic_ntsc_params), }, [TUNER_TEMIC_PAL_I] = { /* TEMIC PAL_I */ .name = "Temic PAL_I (4062 FY5)", .params = tuner_temic_pal_i_params, + .count = ARRAY_SIZE(tuner_temic_pal_i_params), }, [TUNER_TEMIC_4036FY5_NTSC] = { /* TEMIC NTSC */ .name = "Temic NTSC (4036 FY5)", .params = tuner_temic_4036fy5_ntsc_params, + .count = ARRAY_SIZE(tuner_temic_4036fy5_ntsc_params), }, [TUNER_ALPS_TSBH1_NTSC] = { /* TEMIC NTSC */ .name = "Alps HSBH1", .params = tuner_alps_tsbh1_ntsc_params, + .count = ARRAY_SIZE(tuner_alps_tsbh1_ntsc_params), }, /* 10-19 */ [TUNER_ALPS_TSBE1_PAL] = { /* TEMIC PAL */ .name = "Alps TSBE1", .params = tuner_alps_tsb_1_params, + .count = ARRAY_SIZE(tuner_alps_tsb_1_params), }, [TUNER_ALPS_TSBB5_PAL_I] = { /* Alps PAL_I */ .name = "Alps TSBB5", .params = tuner_alps_tsbb5_params, + .count = ARRAY_SIZE(tuner_alps_tsbb5_params), }, [TUNER_ALPS_TSBE5_PAL] = { /* Alps PAL */ .name = "Alps TSBE5", .params = tuner_alps_tsbe5_params, + .count = ARRAY_SIZE(tuner_alps_tsbe5_params), }, [TUNER_ALPS_TSBC5_PAL] = { /* Alps PAL */ .name = "Alps TSBC5", .params = tuner_alps_tsbc5_params, + .count = ARRAY_SIZE(tuner_alps_tsbc5_params), }, [TUNER_TEMIC_4006FH5_PAL] = { /* TEMIC PAL */ .name = "Temic PAL_BG (4006FH5)", .params = tuner_temic_4006fh5_params, + .count = ARRAY_SIZE(tuner_temic_4006fh5_params), }, [TUNER_ALPS_TSHC6_NTSC] = { /* Alps NTSC */ .name = "Alps TSCH6", .params = tuner_alps_tshc6_params, + .count = ARRAY_SIZE(tuner_alps_tshc6_params), }, [TUNER_TEMIC_PAL_DK] = { /* TEMIC PAL */ .name = "Temic PAL_DK (4016 FY5)", .params = tuner_temic_pal_dk_params, + .count = ARRAY_SIZE(tuner_temic_pal_dk_params), }, [TUNER_PHILIPS_NTSC_M] = { /* Philips NTSC */ .name = "Philips NTSC_M (MK2)", .params = tuner_philips_ntsc_m_params, + .count = ARRAY_SIZE(tuner_philips_ntsc_m_params), }, [TUNER_TEMIC_4066FY5_PAL_I] = { /* TEMIC PAL_I */ .name = "Temic PAL_I (4066 FY5)", .params = tuner_temic_4066fy5_pal_i_params, + .count = ARRAY_SIZE(tuner_temic_4066fy5_pal_i_params), }, [TUNER_TEMIC_4006FN5_MULTI_PAL] = { /* TEMIC PAL */ .name = "Temic PAL* auto (4006 FN5)", .params = tuner_temic_4006fn5_multi_params, + .count = ARRAY_SIZE(tuner_temic_4006fn5_multi_params), }, /* 20-29 */ [TUNER_TEMIC_4009FR5_PAL] = { /* TEMIC PAL */ .name = "Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)", .params = tuner_temic_4009f_5_params, + .count = ARRAY_SIZE(tuner_temic_4009f_5_params), }, [TUNER_TEMIC_4039FR5_NTSC] = { /* TEMIC NTSC */ .name = "Temic NTSC (4039 FR5)", .params = tuner_temic_4039fr5_params, + .count = ARRAY_SIZE(tuner_temic_4039fr5_params), }, [TUNER_TEMIC_4046FM5] = { /* TEMIC PAL */ .name = "Temic PAL/SECAM multi (4046 FM5)", .params = tuner_temic_4046fm5_params, + .count = ARRAY_SIZE(tuner_temic_4046fm5_params), }, [TUNER_PHILIPS_PAL_DK] = { /* Philips PAL */ .name = "Philips PAL_DK (FI1256 and compatibles)", .params = tuner_philips_pal_dk_params, + .count = ARRAY_SIZE(tuner_philips_pal_dk_params), }, [TUNER_PHILIPS_FQ1216ME] = { /* Philips PAL */ .name = "Philips PAL/SECAM multi (FQ1216ME)", .params = tuner_philips_fq1216me_params, + .count = ARRAY_SIZE(tuner_philips_fq1216me_params), }, [TUNER_LG_PAL_I_FM] = { /* LGINNOTEK PAL_I */ .name = "LG PAL_I+FM (TAPC-I001D)", .params = tuner_lg_pal_i_fm_params, + .count = ARRAY_SIZE(tuner_lg_pal_i_fm_params), }, [TUNER_LG_PAL_I] = { /* LGINNOTEK PAL_I */ .name = "LG PAL_I (TAPC-I701D)", .params = tuner_lg_pal_i_params, + .count = ARRAY_SIZE(tuner_lg_pal_i_params), }, [TUNER_LG_NTSC_FM] = { /* LGINNOTEK NTSC */ .name = "LG NTSC+FM (TPI8NSR01F)", .params = tuner_lg_ntsc_fm_params, + .count = ARRAY_SIZE(tuner_lg_ntsc_fm_params), }, [TUNER_LG_PAL_FM] = { /* LGINNOTEK PAL */ .name = "LG PAL_BG+FM (TPI8PSB01D)", .params = tuner_lg_pal_fm_params, + .count = ARRAY_SIZE(tuner_lg_pal_fm_params), }, [TUNER_LG_PAL] = { /* LGINNOTEK PAL */ .name = "LG PAL_BG (TPI8PSB11D)", .params = tuner_lg_pal_params, + .count = ARRAY_SIZE(tuner_lg_pal_params), }, /* 30-39 */ [TUNER_TEMIC_4009FN5_MULTI_PAL_FM] = { /* TEMIC PAL */ .name = "Temic PAL* auto + FM (4009 FN5)", .params = tuner_temic_4009_fn5_multi_pal_fm_params, + .count = ARRAY_SIZE(tuner_temic_4009_fn5_multi_pal_fm_params), }, [TUNER_SHARP_2U5JF5540_NTSC] = { /* SHARP NTSC */ .name = "SHARP NTSC_JP (2U5JF5540)", .params = tuner_sharp_2u5jf5540_params, + .count = ARRAY_SIZE(tuner_sharp_2u5jf5540_params), }, [TUNER_Samsung_PAL_TCPM9091PD27] = { /* Samsung PAL */ .name = "Samsung PAL TCPM9091PD27", .params = tuner_samsung_pal_tcpm9091pd27_params, + .count = ARRAY_SIZE(tuner_samsung_pal_tcpm9091pd27_params), }, [TUNER_MT2032] = { /* Microtune PAL|NTSC */ .name = "MT20xx universal", @@ -1248,86 +1203,106 @@ struct tunertype tuners[] = { [TUNER_TEMIC_4106FH5] = { /* TEMIC PAL */ .name = "Temic PAL_BG (4106 FH5)", .params = tuner_temic_4106fh5_params, + .count = ARRAY_SIZE(tuner_temic_4106fh5_params), }, [TUNER_TEMIC_4012FY5] = { /* TEMIC PAL */ .name = "Temic PAL_DK/SECAM_L (4012 FY5)", .params = tuner_temic_4012fy5_params, + .count = ARRAY_SIZE(tuner_temic_4012fy5_params), }, [TUNER_TEMIC_4136FY5] = { /* TEMIC NTSC */ .name = "Temic NTSC (4136 FY5)", .params = tuner_temic_4136_fy5_params, + .count = ARRAY_SIZE(tuner_temic_4136_fy5_params), }, [TUNER_LG_PAL_NEW_TAPC] = { /* LGINNOTEK PAL */ .name = "LG PAL (newer TAPC series)", .params = tuner_lg_pal_new_tapc_params, + .count = ARRAY_SIZE(tuner_lg_pal_new_tapc_params), }, [TUNER_PHILIPS_FM1216ME_MK3] = { /* Philips PAL */ .name = "Philips PAL/SECAM multi (FM1216ME MK3)", .params = tuner_fm1216me_mk3_params, + .count = ARRAY_SIZE(tuner_fm1216me_mk3_params), }, [TUNER_LG_NTSC_NEW_TAPC] = { /* LGINNOTEK NTSC */ .name = "LG NTSC (newer TAPC series)", .params = tuner_lg_ntsc_new_tapc_params, + .count = ARRAY_SIZE(tuner_lg_ntsc_new_tapc_params), }, /* 40-49 */ [TUNER_HITACHI_NTSC] = { /* HITACHI NTSC */ .name = "HITACHI V7-J180AT", .params = tuner_hitachi_ntsc_params, + .count = ARRAY_SIZE(tuner_hitachi_ntsc_params), }, [TUNER_PHILIPS_PAL_MK] = { /* Philips PAL */ .name = "Philips PAL_MK (FI1216 MK)", .params = tuner_philips_pal_mk_params, + .count = ARRAY_SIZE(tuner_philips_pal_mk_params), }, [TUNER_PHILIPS_ATSC] = { /* Philips ATSC */ .name = "Philips 1236D ATSC/NTSC dual in", .params = tuner_philips_atsc_params, + .count = ARRAY_SIZE(tuner_philips_atsc_params), }, [TUNER_PHILIPS_FM1236_MK3] = { /* Philips NTSC */ .name = "Philips NTSC MK3 (FM1236MK3 or FM1236/F)", .params = tuner_fm1236_mk3_params, + .count = ARRAY_SIZE(tuner_fm1236_mk3_params), }, [TUNER_PHILIPS_4IN1] = { /* Philips NTSC */ .name = "Philips 4 in 1 (ATI TV Wonder Pro/Conexant)", .params = tuner_philips_4in1_params, + .count = ARRAY_SIZE(tuner_philips_4in1_params), }, [TUNER_MICROTUNE_4049FM5] = { /* Microtune PAL */ .name = "Microtune 4049 FM5", .params = tuner_microtune_4049_fm5_params, + .count = ARRAY_SIZE(tuner_microtune_4049_fm5_params), }, [TUNER_PANASONIC_VP27] = { /* Panasonic NTSC */ .name = "Panasonic VP27s/ENGE4324D", .params = tuner_panasonic_vp27_params, + .count = ARRAY_SIZE(tuner_panasonic_vp27_params), }, [TUNER_LG_NTSC_TAPE] = { /* LGINNOTEK NTSC */ .name = "LG NTSC (TAPE series)", .params = tuner_lg_ntsc_tape_params, + .count = ARRAY_SIZE(tuner_lg_ntsc_tape_params), }, [TUNER_TNF_8831BGFF] = { /* Philips PAL */ .name = "Tenna TNF 8831 BGFF)", .params = tuner_tnf_8831bgff_params, + .count = ARRAY_SIZE(tuner_tnf_8831bgff_params), }, [TUNER_MICROTUNE_4042FI5] = { /* Microtune NTSC */ .name = "Microtune 4042 FI5 ATSC/NTSC dual in", .params = tuner_microtune_4042fi5_params, + .count = ARRAY_SIZE(tuner_microtune_4042fi5_params), }, /* 50-59 */ [TUNER_TCL_2002N] = { /* TCL NTSC */ .name = "TCL 2002N", .params = tuner_tcl_2002n_params, + .count = ARRAY_SIZE(tuner_tcl_2002n_params), }, [TUNER_PHILIPS_FM1256_IH3] = { /* Philips PAL */ .name = "Philips PAL/SECAM_D (FM 1256 I-H3)", .params = tuner_philips_fm1256_ih3_params, + .count = ARRAY_SIZE(tuner_philips_fm1256_ih3_params), }, [TUNER_THOMSON_DTT7610] = { /* THOMSON ATSC */ .name = "Thomson DTT 7610 (ATSC/NTSC)", .params = tuner_thomson_dtt7610_params, + .count = ARRAY_SIZE(tuner_thomson_dtt7610_params), }, [TUNER_PHILIPS_FQ1286] = { /* Philips NTSC */ .name = "Philips FQ1286", .params = tuner_philips_fq1286_params, + .count = ARRAY_SIZE(tuner_philips_fq1286_params), }, [TUNER_PHILIPS_TDA8290] = { /* Philips PAL|NTSC */ .name = "tda8290+75", @@ -1335,22 +1310,27 @@ struct tunertype tuners[] = { [TUNER_TCL_2002MB] = { /* TCL PAL */ .name = "TCL 2002MB", .params = tuner_tcl_2002mb_params, + .count = ARRAY_SIZE(tuner_tcl_2002mb_params), }, [TUNER_PHILIPS_FQ1216AME_MK4] = { /* Philips PAL */ .name = "Philips PAL/SECAM multi (FQ1216AME MK4)", .params = tuner_philips_fq1216ame_mk4_params, + .count = ARRAY_SIZE(tuner_philips_fq1216ame_mk4_params), }, [TUNER_PHILIPS_FQ1236A_MK4] = { /* Philips NTSC */ .name = "Philips FQ1236A MK4", .params = tuner_philips_fq1236a_mk4_params, + .count = ARRAY_SIZE(tuner_philips_fq1236a_mk4_params), }, [TUNER_YMEC_TVF_8531MF] = { /* Philips NTSC */ .name = "Ymec TVision TVF-8531MF/8831MF/8731MF", .params = tuner_ymec_tvf_8531mf_params, + .count = ARRAY_SIZE(tuner_ymec_tvf_8531mf_params), }, [TUNER_YMEC_TVF_5533MF] = { /* Philips NTSC */ .name = "Ymec TVision TVF-5533MF", .params = tuner_ymec_tvf_5533mf_params, + .count = ARRAY_SIZE(tuner_ymec_tvf_5533mf_params), }, /* 60-69 */ @@ -1358,10 +1338,12 @@ struct tunertype tuners[] = { /* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */ .name = "Thomson DTT 761X (ATSC/NTSC)", .params = tuner_thomson_dtt761x_params, + .count = ARRAY_SIZE(tuner_thomson_dtt761x_params), }, [TUNER_TENA_9533_DI] = { /* Philips PAL */ .name = "Tena TNF9533-D/IF/TNF9533-B/DF", .params = tuner_tena_9533_di_params, + .count = ARRAY_SIZE(tuner_tena_9533_di_params), }, [TUNER_TEA5767] = { /* Philips RADIO */ .name = "Philips TEA5767HN FM Radio", @@ -1369,37 +1351,54 @@ struct tunertype tuners[] = { }, [TUNER_PHILIPS_FMD1216ME_MK3] = { /* Philips PAL */ .name = "Philips FMD1216ME MK3 Hybrid Tuner", - .params = tuner_tuner_philips_fmd1216me_mk3_params, + .params = tuner_philips_fmd1216me_mk3_params, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_params), }, [TUNER_LG_TDVS_H062F] = { /* LGINNOTEK ATSC */ .name = "LG TDVS-H062F/TUA6034", .params = tuner_tua6034_params, + .count = ARRAY_SIZE(tuner_tua6034_params), }, [TUNER_YMEC_TVF66T5_B_DFF] = { /* Philips PAL */ .name = "Ymec TVF66T5-B/DFF", .params = tuner_ymec_tvf66t5_b_dff_params, + .count = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_params), }, - [TUNER_LG_NTSC_TALN_MINI] = { /* LGINNOTEK NTSC */ - .name = "LG NTSC (TALN mini series)", - .params = tuner_lg_taln_mini_params, + [TUNER_LG_TALN] = { /* LGINNOTEK NTSC / PAL / SECAM */ + .name = "LG TALN series", + .params = tuner_lg_taln_params, + .count = ARRAY_SIZE(tuner_lg_taln_params), }, [TUNER_PHILIPS_TD1316] = { /* Philips PAL */ .name = "Philips TD1316 Hybrid Tuner", .params = tuner_philips_td1316_params, + .count = ARRAY_SIZE(tuner_philips_td1316_params), }, [TUNER_PHILIPS_TUV1236D] = { /* Philips ATSC */ .name = "Philips TUV1236D ATSC/NTSC dual in", - .params = tuner_tuner_tuv1236d_params, + .params = tuner_tuv1236d_params, + .count = ARRAY_SIZE(tuner_tuv1236d_params), }, - [TUNER_TNF_5335MF] = { /* Philips NTSC */ - .name = "Tena TNF 5335 MF", + [TUNER_TNF_5335MF] = { /* Tenna PAL/NTSC */ + .name = "Tena TNF 5335 and similar models", .params = tuner_tnf_5335mf_params, + .count = ARRAY_SIZE(tuner_tnf_5335mf_params), }, /* 70-79 */ [TUNER_SAMSUNG_TCPN_2121P30A] = { /* Samsung NTSC */ .name = "Samsung TCPN 2121P30A", .params = tuner_samsung_tcpn_2121p30a_params, + .count = ARRAY_SIZE(tuner_samsung_tcpn_2121p30a_params), + }, + [TUNER_XCEIVE_XC3028] = { /* Xceive 3028 */ + .name = "Xceive xc3028", + /* see xc3028.c for details */ + }, + [TUNER_THOMSON_FE6600] = { /* Thomson PAL / DVB-T */ + .name = "Thomson FE6600", + .params = tuner_thomson_fe6600_params, + .count = ARRAY_SIZE(tuner_thomson_fe6600_params), }, }; diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index c8e5ad0e8185..356bff455ad1 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -30,10 +30,10 @@ #include <linux/init.h> #include <linux/smp_lock.h> -#include <media/audiochip.h> +#include <media/tvaudio.h> #include <media/v4l2-common.h> -#include "tvaudio.h" +#include <media/i2c-addr.h> /* ---------------------------------------------------------------------- */ /* insmod args */ @@ -102,7 +102,7 @@ struct CHIPDESC { /* input switch register + values for v4l inputs */ int inputreg; - int inputmap[8]; + int inputmap[4]; int inputmute; int inputmask; }; @@ -119,9 +119,10 @@ struct CHIPSTATE { audiocmd shadow; /* current settings */ - __u16 left,right,treble,bass,mode; + __u16 left,right,treble,bass,muted,mode; int prevmode; int radio; + int input; /* thread */ pid_t tpid; @@ -130,20 +131,21 @@ struct CHIPSTATE { struct timer_list wt; int done; int watch_stereo; + int audmode; }; /* ---------------------------------------------------------------------- */ /* i2c addresses */ static unsigned short normal_i2c[] = { - I2C_TDA8425 >> 1, - I2C_TEA6300 >> 1, - I2C_TEA6420 >> 1, - I2C_TDA9840 >> 1, - I2C_TDA985x_L >> 1, - I2C_TDA985x_H >> 1, - I2C_TDA9874 >> 1, - I2C_PIC16C54 >> 1, + I2C_ADDR_TDA8425 >> 1, + I2C_ADDR_TEA6300 >> 1, + I2C_ADDR_TEA6420 >> 1, + I2C_ADDR_TDA9840 >> 1, + I2C_ADDR_TDA985x_L >> 1, + I2C_ADDR_TDA985x_H >> 1, + I2C_ADDR_TDA9874 >> 1, + I2C_ADDR_PIC16C54 >> 1, I2C_CLIENT_END }; I2C_CLIENT_INSMOD; @@ -1100,9 +1102,8 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } static int tda8425_initialize(struct CHIPSTATE *chip) { struct CHIPDESC *desc = chiplist + chip->type; - int inputmap[8] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, - /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF, - /* off */ TDA8425_S1_OFF, /* on */ TDA8425_S1_CH2}; + int inputmap[4] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, + /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF}; if (chip->c.adapter->id == I2C_HW_B_RIVA) { memcpy (desc->inputmap, inputmap, sizeof (inputmap)); @@ -1268,8 +1269,8 @@ static struct CHIPDESC chiplist[] = { .name = "tda9840", .id = I2C_DRIVERID_TDA9840, .insmodopt = &tda9840, - .addr_lo = I2C_TDA9840 >> 1, - .addr_hi = I2C_TDA9840 >> 1, + .addr_lo = I2C_ADDR_TDA9840 >> 1, + .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, .checkit = tda9840_checkit, @@ -1285,8 +1286,8 @@ static struct CHIPDESC chiplist[] = { .id = I2C_DRIVERID_TDA9873, .checkit = tda9873_checkit, .insmodopt = &tda9873, - .addr_lo = I2C_TDA985x_L >> 1, - .addr_hi = I2C_TDA985x_H >> 1, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, .flags = CHIP_HAS_INPUTSEL, @@ -1297,7 +1298,7 @@ static struct CHIPDESC chiplist[] = { .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, .inputreg = TDA9873_SW, .inputmute = TDA9873_MUTE | TDA9873_AUTOMUTE, - .inputmap = {0xa0, 0xa2, 0xa0, 0xa0, 0xc0}, + .inputmap = {0xa0, 0xa2, 0xa0, 0xa0}, .inputmask = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE, }, @@ -1307,8 +1308,8 @@ static struct CHIPDESC chiplist[] = { .checkit = tda9874a_checkit, .initialize = tda9874a_initialize, .insmodopt = &tda9874a, - .addr_lo = I2C_TDA9874 >> 1, - .addr_hi = I2C_TDA9874 >> 1, + .addr_lo = I2C_ADDR_TDA9874 >> 1, + .addr_hi = I2C_ADDR_TDA9874 >> 1, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, @@ -1318,8 +1319,8 @@ static struct CHIPDESC chiplist[] = { .name = "tda9850", .id = I2C_DRIVERID_TDA9850, .insmodopt = &tda9850, - .addr_lo = I2C_TDA985x_L >> 1, - .addr_hi = I2C_TDA985x_H >> 1, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 11, .getmode = tda985x_getmode, @@ -1331,8 +1332,8 @@ static struct CHIPDESC chiplist[] = { .name = "tda9855", .id = I2C_DRIVERID_TDA9855, .insmodopt = &tda9855, - .addr_lo = I2C_TDA985x_L >> 1, - .addr_hi = I2C_TDA985x_H >> 1, + .addr_lo = I2C_ADDR_TDA985x_L >> 1, + .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 11, .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE, @@ -1356,8 +1357,8 @@ static struct CHIPDESC chiplist[] = { .name = "tea6300", .id = I2C_DRIVERID_TEA6300, .insmodopt = &tea6300, - .addr_lo = I2C_TEA6300 >> 1, - .addr_hi = I2C_TEA6300 >> 1, + .addr_lo = I2C_ADDR_TEA6300 >> 1, + .addr_hi = I2C_ADDR_TEA6300 >> 1, .registers = 6, .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, @@ -1378,8 +1379,8 @@ static struct CHIPDESC chiplist[] = { .id = I2C_DRIVERID_TEA6300, .initialize = tea6320_initialize, .insmodopt = &tea6320, - .addr_lo = I2C_TEA6300 >> 1, - .addr_hi = I2C_TEA6300 >> 1, + .addr_lo = I2C_ADDR_TEA6300 >> 1, + .addr_hi = I2C_ADDR_TEA6300 >> 1, .registers = 8, .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, @@ -1399,8 +1400,8 @@ static struct CHIPDESC chiplist[] = { .name = "tea6420", .id = I2C_DRIVERID_TEA6420, .insmodopt = &tea6420, - .addr_lo = I2C_TEA6420 >> 1, - .addr_hi = I2C_TEA6420 >> 1, + .addr_lo = I2C_ADDR_TEA6420 >> 1, + .addr_hi = I2C_ADDR_TEA6420 >> 1, .registers = 1, .flags = CHIP_HAS_INPUTSEL, @@ -1412,8 +1413,8 @@ static struct CHIPDESC chiplist[] = { .name = "tda8425", .id = I2C_DRIVERID_TDA8425, .insmodopt = &tda8425, - .addr_lo = I2C_TDA8425 >> 1, - .addr_hi = I2C_TDA8425 >> 1, + .addr_lo = I2C_ADDR_TDA8425 >> 1, + .addr_hi = I2C_ADDR_TDA8425 >> 1, .registers = 9, .flags = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL, @@ -1436,8 +1437,8 @@ static struct CHIPDESC chiplist[] = { .name = "pic16c54 (PV951)", .id = I2C_DRIVERID_PIC16C54_PV9, .insmodopt = &pic16c54, - .addr_lo = I2C_PIC16C54 >> 1, - .addr_hi = I2C_PIC16C54>> 1, + .addr_lo = I2C_ADDR_PIC16C54 >> 1, + .addr_hi = I2C_ADDR_PIC16C54>> 1, .registers = 2, .flags = CHIP_HAS_INPUTSEL, @@ -1445,8 +1446,7 @@ static struct CHIPDESC chiplist[] = { .inputmap = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER, PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE, - PIC16C54_MISC_SND_MUTE,PIC16C54_MISC_SND_MUTE, - PIC16C54_MISC_SND_NOTMUTE}, + PIC16C54_MISC_SND_MUTE}, .inputmute = PIC16C54_MISC_SND_MUTE, }, { @@ -1455,8 +1455,8 @@ static struct CHIPDESC chiplist[] = { /*.id = I2C_DRIVERID_TA8874Z, */ .checkit = ta8874z_checkit, .insmodopt = &ta8874z, - .addr_lo = I2C_TDA9840 >> 1, - .addr_hi = I2C_TDA9840 >> 1, + .addr_lo = I2C_ADDR_TDA9840 >> 1, + .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, .getmode = ta8874z_getmode, @@ -1514,6 +1514,7 @@ static int chip_attach(struct i2c_adapter *adap, int addr, int kind) chip->type = desc-chiplist; chip->shadow.count = desc->registers+1; chip->prevmode = -1; + chip->audmode = V4L2_TUNER_MODE_LANG1; /* register */ i2c_attach_client(&chip->c); @@ -1581,28 +1582,40 @@ static int chip_detach(struct i2c_client *client) return 0; } +static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) +{ + struct CHIPDESC *desc = chiplist + chip->type; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (ctrl->value < 0 || ctrl->value >= 2) + return -ERANGE; + chip->muted = ctrl->value; + if (chip->muted) + chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask); + else + chip_write_masked(chip,desc->inputreg, + desc->inputmap[chip->input],desc->inputmask); + break; + default: + return -EINVAL; + } + return 0; +} + + /* ---------------------------------------------------------------------- */ /* video4linux interface */ static int chip_command(struct i2c_client *client, unsigned int cmd, void *arg) { - __u16 *sarg = arg; struct CHIPSTATE *chip = i2c_get_clientdata(client); struct CHIPDESC *desc = chiplist + chip->type; v4l_dbg(1, debug, &chip->c, "%s: chip_command 0x%x\n", chip->c.name, cmd); switch (cmd) { - case AUDC_SET_INPUT: - if (desc->flags & CHIP_HAS_INPUTSEL) { - if (*sarg & 0x80) - chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask); - else - chip_write_masked(chip,desc->inputreg,desc->inputmap[*sarg],desc->inputmask); - } - break; - case AUDC_SET_RADIO: chip->radio = 1; chip->watch_stereo = 0; @@ -1666,16 +1679,61 @@ static int chip_command(struct i2c_client *client, break; } + case VIDIOC_S_CTRL: + return tvaudio_set_ctrl(chip, arg); + + case VIDIOC_INT_G_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + + rt->input = chip->input; + rt->output = 0; + break; + } + + case VIDIOC_INT_S_AUDIO_ROUTING: + { + struct v4l2_routing *rt = arg; + + if (!(desc->flags & CHIP_HAS_INPUTSEL) || rt->input >= 4) + return -EINVAL; + /* There are four inputs: tuner, radio, extern and intern. */ + chip->input = rt->input; + if (chip->muted) + break; + chip_write_masked(chip, desc->inputreg, + desc->inputmap[chip->input], desc->inputmask); + break; + } + + case VIDIOC_S_AUDIO: + { + struct v4l2_audio *sarg = arg; + + if (!(desc->flags & CHIP_HAS_INPUTSEL) || sarg->index >= 4) + return -EINVAL; + /* There are four inputs: tuner, radio, extern and intern. */ + chip->input = sarg->index; + if (chip->muted) + break; + chip_write_masked(chip, desc->inputreg, + desc->inputmap[chip->input], desc->inputmask); + break; + } + case VIDIOC_S_TUNER: { struct v4l2_tuner *vt = arg; int mode = 0; + if (chip->radio) + break; switch (vt->audmode) { case V4L2_TUNER_MODE_MONO: mode = VIDEO_SOUND_MONO; break; case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: mode = VIDEO_SOUND_STEREO; break; case V4L2_TUNER_MODE_LANG1: @@ -1685,8 +1743,9 @@ static int chip_command(struct i2c_client *client, mode = VIDEO_SOUND_LANG2; break; default: - break; + return -EINVAL; } + chip->audmode = vt->audmode; if (desc->setmode && mode) { chip->watch_stereo = 0; @@ -1704,7 +1763,7 @@ static int chip_command(struct i2c_client *client, if (chip->radio) break; - vt->audmode = 0; + vt->audmode = chip->audmode; vt->rxsubchans = 0; vt->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; @@ -1716,19 +1775,12 @@ static int chip_command(struct i2c_client *client, vt->rxsubchans |= V4L2_TUNER_SUB_MONO; if (mode & VIDEO_SOUND_STEREO) vt->rxsubchans |= V4L2_TUNER_SUB_STEREO; + /* Note: for SAP it should be mono/lang2 or stereo/lang2. + When this module is converted fully to v4l2, then this + should change for those chips that can detect SAP. */ if (mode & VIDEO_SOUND_LANG1) - vt->rxsubchans |= V4L2_TUNER_SUB_LANG1 | - V4L2_TUNER_SUB_LANG2; - - mode = chip->mode; - if (mode & VIDEO_SOUND_MONO) - vt->audmode = V4L2_TUNER_MODE_MONO; - if (mode & VIDEO_SOUND_STEREO) - vt->audmode = V4L2_TUNER_MODE_STEREO; - if (mode & VIDEO_SOUND_LANG1) - vt->audmode = V4L2_TUNER_MODE_LANG1; - if (mode & VIDEO_SOUND_LANG2) - vt->audmode = V4L2_TUNER_MODE_LANG2; + vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | + V4L2_TUNER_SUB_LANG2; break; } diff --git a/drivers/media/video/tvaudio.h b/drivers/media/video/tvaudio.h deleted file mode 100644 index af7e116af9a9..000000000000 --- a/drivers/media/video/tvaudio.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * i2c bus addresses for the chips supported by tvaudio.c - */ - -#define I2C_TDA8425 0x82 -#define I2C_TDA9840 0x84 /* also used by TA8874Z */ -#define I2C_TDA985x_L 0xb4 /* also used by 9873 */ -#define I2C_TDA985x_H 0xb6 -#define I2C_TDA9874 0xb0 /* also used by 9875 */ - -#define I2C_TEA6300 0x80 /* also used by 6320 */ -#define I2C_TEA6420 0x98 - -#define I2C_PIC16C54 0x96 /* PV951 */ diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 582551b0969b..e0d2ff83fc91 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -248,32 +248,32 @@ audioIC[] = {AUDIO_CHIP_MSP34XX, "MSP3410D"}, {AUDIO_CHIP_MSP34XX, "MSP3415"}, {AUDIO_CHIP_MSP34XX, "MSP3430"}, - {AUDIO_CHIP_UNKNOWN, "MSP3438"}, + {AUDIO_CHIP_MSP34XX, "MSP3438"}, {AUDIO_CHIP_UNKNOWN, "CS5331"}, /* 10-14 */ {AUDIO_CHIP_MSP34XX, "MSP3435"}, {AUDIO_CHIP_MSP34XX, "MSP3440"}, {AUDIO_CHIP_MSP34XX, "MSP3445"}, - {AUDIO_CHIP_UNKNOWN, "MSP3411"}, - {AUDIO_CHIP_UNKNOWN, "MSP3416"}, + {AUDIO_CHIP_MSP34XX, "MSP3411"}, + {AUDIO_CHIP_MSP34XX, "MSP3416"}, /* 15-19 */ {AUDIO_CHIP_MSP34XX, "MSP3425"}, - {AUDIO_CHIP_UNKNOWN, "MSP3451"}, - {AUDIO_CHIP_UNKNOWN, "MSP3418"}, + {AUDIO_CHIP_MSP34XX, "MSP3451"}, + {AUDIO_CHIP_MSP34XX, "MSP3418"}, {AUDIO_CHIP_UNKNOWN, "Type 0x12"}, {AUDIO_CHIP_UNKNOWN, "OKI7716"}, /* 20-24 */ - {AUDIO_CHIP_UNKNOWN, "MSP4410"}, - {AUDIO_CHIP_UNKNOWN, "MSP4420"}, - {AUDIO_CHIP_UNKNOWN, "MSP4440"}, - {AUDIO_CHIP_UNKNOWN, "MSP4450"}, - {AUDIO_CHIP_UNKNOWN, "MSP4408"}, + {AUDIO_CHIP_MSP34XX, "MSP4410"}, + {AUDIO_CHIP_MSP34XX, "MSP4420"}, + {AUDIO_CHIP_MSP34XX, "MSP4440"}, + {AUDIO_CHIP_MSP34XX, "MSP4450"}, + {AUDIO_CHIP_MSP34XX, "MSP4408"}, /* 25-29 */ - {AUDIO_CHIP_UNKNOWN, "MSP4418"}, - {AUDIO_CHIP_UNKNOWN, "MSP4428"}, - {AUDIO_CHIP_UNKNOWN, "MSP4448"}, - {AUDIO_CHIP_UNKNOWN, "MSP4458"}, - {AUDIO_CHIP_UNKNOWN, "Type 0x1d"}, + {AUDIO_CHIP_MSP34XX, "MSP4418"}, + {AUDIO_CHIP_MSP34XX, "MSP4428"}, + {AUDIO_CHIP_MSP34XX, "MSP4448"}, + {AUDIO_CHIP_MSP34XX, "MSP4458"}, + {AUDIO_CHIP_MSP34XX, "Type 0x1d"}, /* 30-34 */ {AUDIO_CHIP_INTERNAL, "CX880"}, {AUDIO_CHIP_INTERNAL, "CX881"}, diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index 1864423b3046..69d0fe159f4d 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -1,8 +1,8 @@ /* - * tvp5150 - Texas Instruments TVP5150A(M) video decoder driver + * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver * - * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br) - * This code is placed under the terms of the GNU General Public License + * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License v2 */ #include <linux/i2c.h> @@ -13,10 +13,11 @@ #include "tvp5150_reg.h" -MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); /* standard i2c insmod options */ +MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); MODULE_AUTHOR("Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); +/* standard i2c insmod options */ static unsigned short normal_i2c[] = { 0xb8 >> 1, 0xba >> 1, @@ -29,6 +30,9 @@ static int debug = 0; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); +#define tvp5150_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, c->driver->driver.name, \ + i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0) #define tvp5150_info(fmt, arg...) do { \ printk(KERN_INFO "%s %d-%04x: " fmt, c->driver->driver.name, \ i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0) @@ -84,7 +88,7 @@ static struct v4l2_queryctrl tvp5150_qctrl[] = { struct tvp5150 { struct i2c_client *client; - int norm; + v4l2_std_id norm; /* Current set standard */ int input; int enable; int bright; @@ -125,310 +129,155 @@ static inline void tvp5150_write(struct i2c_client *c, unsigned char addr, tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 2)\n", rc); } +static void dump_reg_range(struct i2c_client *c, char *s, u8 init, const u8 end,int max_line) +{ + int i=0; + + while (init!=(u8)(end+1)) { + if ((i%max_line) == 0) { + if (i>0) + printk("\n"); + printk("tvp5150: %s reg 0x%02x = ",s,init); + } + printk("%02x ",tvp5150_read(c, init)); + + init++; + i++; + } + printk("\n"); +} + static void dump_reg(struct i2c_client *c) { printk("tvp5150: Video input source selection #1 = 0x%02x\n", - tvp5150_read(c, TVP5150_VD_IN_SRC_SEL_1)); + tvp5150_read(c, TVP5150_VD_IN_SRC_SEL_1)); printk("tvp5150: Analog channel controls = 0x%02x\n", - tvp5150_read(c, TVP5150_ANAL_CHL_CTL)); + tvp5150_read(c, TVP5150_ANAL_CHL_CTL)); printk("tvp5150: Operation mode controls = 0x%02x\n", - tvp5150_read(c, TVP5150_OP_MODE_CTL)); + tvp5150_read(c, TVP5150_OP_MODE_CTL)); printk("tvp5150: Miscellaneous controls = 0x%02x\n", - tvp5150_read(c, TVP5150_MISC_CTL)); - printk("tvp5150: Autoswitch mask: TVP5150A / TVP5150AM = 0x%02x\n", - tvp5150_read(c, TVP5150_AUTOSW_MSK)); + tvp5150_read(c, TVP5150_MISC_CTL)); + printk("tvp5150: Autoswitch mask= 0x%02x\n", + tvp5150_read(c, TVP5150_AUTOSW_MSK)); printk("tvp5150: Color killer threshold control = 0x%02x\n", - tvp5150_read(c, TVP5150_COLOR_KIL_THSH_CTL)); - printk("tvp5150: Luminance processing control #1 = 0x%02x\n", - tvp5150_read(c, TVP5150_LUMA_PROC_CTL_1)); - printk("tvp5150: Luminance processing control #2 = 0x%02x\n", - tvp5150_read(c, TVP5150_LUMA_PROC_CTL_2)); + tvp5150_read(c, TVP5150_COLOR_KIL_THSH_CTL)); + printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n", + tvp5150_read(c, TVP5150_LUMA_PROC_CTL_1), + tvp5150_read(c, TVP5150_LUMA_PROC_CTL_2), + tvp5150_read(c, TVP5150_LUMA_PROC_CTL_3)); printk("tvp5150: Brightness control = 0x%02x\n", - tvp5150_read(c, TVP5150_BRIGHT_CTL)); + tvp5150_read(c, TVP5150_BRIGHT_CTL)); printk("tvp5150: Color saturation control = 0x%02x\n", - tvp5150_read(c, TVP5150_SATURATION_CTL)); + tvp5150_read(c, TVP5150_SATURATION_CTL)); printk("tvp5150: Hue control = 0x%02x\n", - tvp5150_read(c, TVP5150_HUE_CTL)); + tvp5150_read(c, TVP5150_HUE_CTL)); printk("tvp5150: Contrast control = 0x%02x\n", - tvp5150_read(c, TVP5150_CONTRAST_CTL)); + tvp5150_read(c, TVP5150_CONTRAST_CTL)); printk("tvp5150: Outputs and data rates select = 0x%02x\n", - tvp5150_read(c, TVP5150_DATA_RATE_SEL)); - printk("tvp5150: Luminance processing control #3 = 0x%02x\n", - tvp5150_read(c, TVP5150_LUMA_PROC_CTL_3)); + tvp5150_read(c, TVP5150_DATA_RATE_SEL)); printk("tvp5150: Configuration shared pins = 0x%02x\n", - tvp5150_read(c, TVP5150_CONF_SHARED_PIN)); - printk("tvp5150: Active video cropping start MSB = 0x%02x\n", - tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_MSB)); - printk("tvp5150: Active video cropping start LSB = 0x%02x\n", - tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_LSB)); - printk("tvp5150: Active video cropping stop MSB = 0x%02x\n", - tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_MSB)); - printk("tvp5150: Active video cropping stop LSB = 0x%02x\n", - tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_LSB)); + tvp5150_read(c, TVP5150_CONF_SHARED_PIN)); + printk("tvp5150: Active video cropping start = 0x%02x%02x\n", + tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_MSB), + tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_LSB)); + printk("tvp5150: Active video cropping stop = 0x%02x%02x\n", + tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_MSB), + tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_LSB)); printk("tvp5150: Genlock/RTC = 0x%02x\n", - tvp5150_read(c, TVP5150_GENLOCK)); + tvp5150_read(c, TVP5150_GENLOCK)); printk("tvp5150: Horizontal sync start = 0x%02x\n", - tvp5150_read(c, TVP5150_HORIZ_SYNC_START)); + tvp5150_read(c, TVP5150_HORIZ_SYNC_START)); printk("tvp5150: Vertical blanking start = 0x%02x\n", - tvp5150_read(c, TVP5150_VERT_BLANKING_START)); + tvp5150_read(c, TVP5150_VERT_BLANKING_START)); printk("tvp5150: Vertical blanking stop = 0x%02x\n", - tvp5150_read(c, TVP5150_VERT_BLANKING_STOP)); - printk("tvp5150: Chrominance processing control #1 = 0x%02x\n", - tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_1)); - printk("tvp5150: Chrominance processing control #2 = 0x%02x\n", - tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_2)); + tvp5150_read(c, TVP5150_VERT_BLANKING_STOP)); + printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n", + tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_1), + tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_2)); printk("tvp5150: Interrupt reset register B = 0x%02x\n", - tvp5150_read(c, TVP5150_INT_RESET_REG_B)); + tvp5150_read(c, TVP5150_INT_RESET_REG_B)); printk("tvp5150: Interrupt enable register B = 0x%02x\n", - tvp5150_read(c, TVP5150_INT_ENABLE_REG_B)); + tvp5150_read(c, TVP5150_INT_ENABLE_REG_B)); printk("tvp5150: Interrupt configuration register B = 0x%02x\n", - tvp5150_read(c, TVP5150_INTT_CONFIG_REG_B)); + tvp5150_read(c, TVP5150_INTT_CONFIG_REG_B)); printk("tvp5150: Video standard = 0x%02x\n", - tvp5150_read(c, TVP5150_VIDEO_STD)); - printk("tvp5150: Cb gain factor = 0x%02x\n", - tvp5150_read(c, TVP5150_CB_GAIN_FACT)); - printk("tvp5150: Cr gain factor = 0x%02x\n", - tvp5150_read(c, TVP5150_CR_GAIN_FACTOR)); + tvp5150_read(c, TVP5150_VIDEO_STD)); + printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n", + tvp5150_read(c, TVP5150_CB_GAIN_FACT), + tvp5150_read(c, TVP5150_CR_GAIN_FACTOR)); printk("tvp5150: Macrovision on counter = 0x%02x\n", - tvp5150_read(c, TVP5150_MACROVISION_ON_CTR)); + tvp5150_read(c, TVP5150_MACROVISION_ON_CTR)); printk("tvp5150: Macrovision off counter = 0x%02x\n", - tvp5150_read(c, TVP5150_MACROVISION_OFF_CTR)); - printk("tvp5150: revision select (TVP5150AM1 only) = 0x%02x\n", - tvp5150_read(c, TVP5150_REV_SELECT)); - printk("tvp5150: MSB of device ID = 0x%02x\n", - tvp5150_read(c, TVP5150_MSB_DEV_ID)); - printk("tvp5150: LSB of device ID = 0x%02x\n", - tvp5150_read(c, TVP5150_LSB_DEV_ID)); - printk("tvp5150: ROM major version = 0x%02x\n", - tvp5150_read(c, TVP5150_ROM_MAJOR_VER)); - printk("tvp5150: ROM minor version = 0x%02x\n", - tvp5150_read(c, TVP5150_ROM_MINOR_VER)); - printk("tvp5150: Vertical line count MSB = 0x%02x\n", - tvp5150_read(c, TVP5150_VERT_LN_COUNT_MSB)); - printk("tvp5150: Vertical line count LSB = 0x%02x\n", - tvp5150_read(c, TVP5150_VERT_LN_COUNT_LSB)); + tvp5150_read(c, TVP5150_MACROVISION_OFF_CTR)); + printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n", + (tvp5150_read(c, TVP5150_REV_SELECT)&1)?3:4); + printk("tvp5150: Device ID = %02x%02x\n", + tvp5150_read(c, TVP5150_MSB_DEV_ID), + tvp5150_read(c, TVP5150_LSB_DEV_ID)); + printk("tvp5150: ROM version = (hex) %02x.%02x\n", + tvp5150_read(c, TVP5150_ROM_MAJOR_VER), + tvp5150_read(c, TVP5150_ROM_MINOR_VER)); + printk("tvp5150: Vertical line count = 0x%02x%02x\n", + tvp5150_read(c, TVP5150_VERT_LN_COUNT_MSB), + tvp5150_read(c, TVP5150_VERT_LN_COUNT_LSB)); printk("tvp5150: Interrupt status register B = 0x%02x\n", - tvp5150_read(c, TVP5150_INT_STATUS_REG_B)); + tvp5150_read(c, TVP5150_INT_STATUS_REG_B)); printk("tvp5150: Interrupt active register B = 0x%02x\n", - tvp5150_read(c, TVP5150_INT_ACTIVE_REG_B)); - printk("tvp5150: Status register #1 = 0x%02x\n", - tvp5150_read(c, TVP5150_STATUS_REG_1)); - printk("tvp5150: Status register #2 = 0x%02x\n", - tvp5150_read(c, TVP5150_STATUS_REG_2)); - printk("tvp5150: Status register #3 = 0x%02x\n", - tvp5150_read(c, TVP5150_STATUS_REG_3)); - printk("tvp5150: Status register #4 = 0x%02x\n", - tvp5150_read(c, TVP5150_STATUS_REG_4)); - printk("tvp5150: Status register #5 = 0x%02x\n", - tvp5150_read(c, TVP5150_STATUS_REG_5)); - printk("tvp5150: Closed caption data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_CC_DATA_REG1)); - printk("tvp5150: Closed caption data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_CC_DATA_REG2)); - printk("tvp5150: Closed caption data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_CC_DATA_REG3)); - printk("tvp5150: Closed caption data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_CC_DATA_REG4)); - printk("tvp5150: WSS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_WSS_DATA_REG1)); - printk("tvp5150: WSS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_WSS_DATA_REG2)); - printk("tvp5150: WSS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_WSS_DATA_REG3)); - printk("tvp5150: WSS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_WSS_DATA_REG4)); - printk("tvp5150: WSS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_WSS_DATA_REG5)); - printk("tvp5150: WSS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_WSS_DATA_REG6)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG1)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG2)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG3)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG4)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG5)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG6)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG7)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG8)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG9)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG10)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG11)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG12)); - printk("tvp5150: VPS data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VPS_DATA_REG13)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG1)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG2)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG3)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG4)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG5)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG6)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG7)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG8)); - printk("tvp5150: VITC data registers = 0x%02x\n", - tvp5150_read(c, TVP5150_VITC_DATA_REG9)); - printk("tvp5150: VBI FIFO read data = 0x%02x\n", - tvp5150_read(c, TVP5150_VBI_FIFO_READ_DATA)); - printk("tvp5150: Teletext filter 1 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_1_1)); - printk("tvp5150: Teletext filter 1 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_1_2)); - printk("tvp5150: Teletext filter 1 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_1_3)); - printk("tvp5150: Teletext filter 1 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_1_4)); - printk("tvp5150: Teletext filter 1 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_1_5)); - printk("tvp5150: Teletext filter 2 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_2_1)); - printk("tvp5150: Teletext filter 2 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_2_2)); - printk("tvp5150: Teletext filter 2 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_2_3)); - printk("tvp5150: Teletext filter 2 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_2_4)); - printk("tvp5150: Teletext filter 2 = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_2_5)); + tvp5150_read(c, TVP5150_INT_ACTIVE_REG_B)); + printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n", + tvp5150_read(c, TVP5150_STATUS_REG_1), + tvp5150_read(c, TVP5150_STATUS_REG_2), + tvp5150_read(c, TVP5150_STATUS_REG_3), + tvp5150_read(c, TVP5150_STATUS_REG_4), + tvp5150_read(c, TVP5150_STATUS_REG_5)); + + dump_reg_range(c,"Teletext filter 1", TVP5150_TELETEXT_FIL1_INI, + TVP5150_TELETEXT_FIL1_END,8); + dump_reg_range(c,"Teletext filter 2", TVP5150_TELETEXT_FIL2_INI, + TVP5150_TELETEXT_FIL2_END,8); + printk("tvp5150: Teletext filter enable = 0x%02x\n", - tvp5150_read(c, TVP5150_TELETEXT_FIL_ENA)); + tvp5150_read(c, TVP5150_TELETEXT_FIL_ENA)); printk("tvp5150: Interrupt status register A = 0x%02x\n", - tvp5150_read(c, TVP5150_INT_STATUS_REG_A)); + tvp5150_read(c, TVP5150_INT_STATUS_REG_A)); printk("tvp5150: Interrupt enable register A = 0x%02x\n", - tvp5150_read(c, TVP5150_INT_ENABLE_REG_A)); + tvp5150_read(c, TVP5150_INT_ENABLE_REG_A)); printk("tvp5150: Interrupt configuration = 0x%02x\n", - tvp5150_read(c, TVP5150_INT_CONF)); - printk("tvp5150: VDP configuration RAM data = 0x%02x\n", - tvp5150_read(c, TVP5150_VDP_CONF_RAM_DATA)); - printk("tvp5150: Configuration RAM address low byte = 0x%02x\n", - tvp5150_read(c, TVP5150_CONF_RAM_ADDR_LOW)); - printk("tvp5150: Configuration RAM address high byte = 0x%02x\n", - tvp5150_read(c, TVP5150_CONF_RAM_ADDR_HIGH)); + tvp5150_read(c, TVP5150_INT_CONF)); printk("tvp5150: VDP status register = 0x%02x\n", - tvp5150_read(c, TVP5150_VDP_STATUS_REG)); + tvp5150_read(c, TVP5150_VDP_STATUS_REG)); printk("tvp5150: FIFO word count = 0x%02x\n", - tvp5150_read(c, TVP5150_FIFO_WORD_COUNT)); + tvp5150_read(c, TVP5150_FIFO_WORD_COUNT)); printk("tvp5150: FIFO interrupt threshold = 0x%02x\n", - tvp5150_read(c, TVP5150_FIFO_INT_THRESHOLD)); + tvp5150_read(c, TVP5150_FIFO_INT_THRESHOLD)); printk("tvp5150: FIFO reset = 0x%02x\n", - tvp5150_read(c, TVP5150_FIFO_RESET)); + tvp5150_read(c, TVP5150_FIFO_RESET)); printk("tvp5150: Line number interrupt = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_NUMBER_INT)); - printk("tvp5150: Pixel alignment register low byte = 0x%02x\n", - tvp5150_read(c, TVP5150_PIX_ALIGN_REG_LOW)); - printk("tvp5150: Pixel alignment register high byte = 0x%02x\n", - tvp5150_read(c, TVP5150_PIX_ALIGN_REG_HIGH)); + tvp5150_read(c, TVP5150_LINE_NUMBER_INT)); + printk("tvp5150: Pixel alignment register = 0x%02x%02x\n", + tvp5150_read(c, TVP5150_PIX_ALIGN_REG_HIGH), + tvp5150_read(c, TVP5150_PIX_ALIGN_REG_LOW)); printk("tvp5150: FIFO output control = 0x%02x\n", - tvp5150_read(c, TVP5150_FIFO_OUT_CTRL)); - printk("tvp5150: Full field enable 1 = 0x%02x\n", - tvp5150_read(c, TVP5150_FULL_FIELD_ENA_1)); - printk("tvp5150: Full field enable 2 = 0x%02x\n", - tvp5150_read(c, TVP5150_FULL_FIELD_ENA_2)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_1)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_2)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_3)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_4)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_5)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_6)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_7)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_8)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_9)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_10)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_11)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_12)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_13)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_14)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_15)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_16)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_17)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_18)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_19)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_20)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_21)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_22)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_23)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_24)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_25)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_27)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_28)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_29)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_30)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_31)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_32)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_33)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_34)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_35)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_36)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_37)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_38)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_39)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_40)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_41)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_42)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_43)); - printk("tvp5150: Line mode registers = 0x%02x\n", - tvp5150_read(c, TVP5150_LINE_MODE_REG_44)); + tvp5150_read(c, TVP5150_FIFO_OUT_CTRL)); + printk("tvp5150: Full field enable = 0x%02x\n", + tvp5150_read(c, TVP5150_FULL_FIELD_ENA)); printk("tvp5150: Full field mode register = 0x%02x\n", - tvp5150_read(c, TVP5150_FULL_FIELD_MODE_REG)); + tvp5150_read(c, TVP5150_FULL_FIELD_MODE_REG)); + + dump_reg_range(c,"CC data", TVP5150_CC_DATA_INI, + TVP5150_CC_DATA_END,8); + + dump_reg_range(c,"WSS data", TVP5150_WSS_DATA_INI, + TVP5150_WSS_DATA_END,8); + + dump_reg_range(c,"VPS data", TVP5150_VPS_DATA_INI, + TVP5150_VPS_DATA_END,8); + + dump_reg_range(c,"VITC data", TVP5150_VITC_DATA_INI, + TVP5150_VITC_DATA_END,10); + + dump_reg_range(c,"Line mode", TVP5150_LINE_MODE_INI, + TVP5150_LINE_MODE_END,8); } /**************************************************************************** @@ -593,10 +442,10 @@ static const struct i2c_reg_value tvp5150_init_default[] = { TVP5150_FIFO_OUT_CTRL,0x01 }, { /* 0xcf */ - TVP5150_FULL_FIELD_ENA_1,0x00 + TVP5150_FULL_FIELD_ENA,0x00 }, { /* 0xd0 */ - TVP5150_FULL_FIELD_ENA_2,0x00 + TVP5150_LINE_MODE_INI,0x00 }, { /* 0xfc */ TVP5150_FULL_FIELD_MODE_REG,0x7f @@ -629,54 +478,101 @@ static const struct i2c_reg_value tvp5150_init_enable[] = { } }; +struct tvp5150_vbi_type { + unsigned int vbi_type; + unsigned int ini_line; + unsigned int end_line; + unsigned int by_field :1; +}; + struct i2c_vbi_ram_value { u16 reg; - unsigned char values[26]; + struct tvp5150_vbi_type type; + unsigned char values[16]; }; +/* This struct have the values for each supported VBI Standard + * by + tvp5150_vbi_types should follow the same order as vbi_ram_default + * value 0 means rom position 0x10, value 1 means rom position 0x30 + * and so on. There are 16 possible locations from 0 to 15. + */ + static struct i2c_vbi_ram_value vbi_ram_default[] = { - {0x010, /* WST SECAM 6 */ - { 0xaa, 0xaa, 0xff, 0xff , 0xe7, 0x2e, 0x20, 0x26, 0xe6, 0xb4, 0x0e, 0x0, 0x0, 0x0, 0x10, 0x0 } + {0x010, /* Teletext, SECAM, WST System A */ + {V4L2_SLICED_TELETEXT_SECAM,6,23,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26, + 0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 } }, - {0x030, /* WST PAL B 6 */ - { 0xaa, 0xaa, 0xff, 0xff , 0x27, 0x2e, 0x20, 0x2b, 0xa6, 0x72, 0x10, 0x0, 0x0, 0x0, 0x10, 0x0 } + {0x030, /* Teletext, PAL, WST System B */ + {V4L2_SLICED_TELETEXT_PAL_B,6,22,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b, + 0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 } }, - {0x050, /* WST PAL C 6 */ - { 0xaa, 0xaa, 0xff, 0xff , 0xe7, 0x2e, 0x20, 0x22, 0xa6, 0x98, 0x0d, 0x0, 0x0, 0x0, 0x10, 0x0 } + {0x050, /* Teletext, PAL, WST System C */ + {V4L2_SLICED_TELETEXT_PAL_C,6,22,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, + 0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } }, - {0x070, /* WST NTSC 6 */ - { 0xaa, 0xaa, 0xff, 0xff , 0x27, 0x2e, 0x20, 0x23, 0x69, 0x93, 0x0d, 0x0, 0x0, 0x0, 0x10, 0x0 } + {0x070, /* Teletext, NTSC, WST System B */ + {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } }, - {0x090, /* NABTS, NTSC 6 */ - { 0xaa, 0xaa, 0xff, 0xff , 0xe7, 0x2e, 0x20, 0x22, 0x69, 0x93, 0x0d, 0x0, 0x0, 0x0, 0x15, 0x0 } + {0x090, /* Tetetext, NTSC NABTS System C */ + {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 } }, - {0x0b0, /* NABTS, NTSC-J 6 */ - { 0xaa, 0xaa, 0xff, 0xff , 0xa7, 0x2e, 0x20, 0x23, 0x69, 0x93, 0x0d, 0x0, 0x0, 0x0, 0x10, 0x0 } + {0x0b0, /* Teletext, NTSC-J, NABTS System D */ + {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1}, + { 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23, + 0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 } }, - {0x0d0, /* CC, PAL/SECAM 6 */ - { 0xaa, 0x2a, 0xff, 0x3f , 0x04, 0x51, 0x6e, 0x02, 0xa6, 0x7b, 0x09, 0x0, 0x0, 0x0, 0x27, 0x0 } + {0x0d0, /* Closed Caption, PAL/SECAM */ + {V4L2_SLICED_CAPTION_625,22,22,1}, + { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, + 0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } }, - {0x0f0, /* CC, NTSC 6 */ - { 0xaa, 0x2a, 0xff, 0x3f , 0x04, 0x51, 0x6e, 0x02, 0x69, 0x8c, 0x09, 0x0, 0x0, 0x0, 0x27, 0x0 } + {0x0f0, /* Closed Caption, NTSC */ + {V4L2_SLICED_CAPTION_525,21,21,1}, + { 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02, + 0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 } }, - {0x110, /* WSS, PAL/SECAM 6 */ - { 0x5b, 0x55, 0xc5, 0xff , 0x0, 0x71, 0x6e, 0x42, 0xa6, 0xcd, 0x0f, 0x0, 0x0, 0x0, 0x3a, 0x0 } + {0x110, /* Wide Screen Signal, PAL/SECAM */ + {V4L2_SLICED_WSS_625,23,23,1}, + { 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42, + 0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 } }, - {0x130, /* WSS, NTSC C */ - { 0x38, 0x00, 0x3f, 0x00 , 0x0, 0x71, 0x6e, 0x43, 0x69, 0x7c, 0x08, 0x0, 0x0, 0x0, 0x39, 0x0 } + {0x130, /* Wide Screen Signal, NTSC C */ + {V4L2_SLICED_WSS_525,20,20,1}, + { 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43, + 0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 } }, - {0x150, /* VITC, PAL/SECAM 6 */ - { 0x0, 0x0, 0x0, 0x0 , 0x0, 0x8f, 0x6d, 0x49, 0xa6, 0x85, 0x08, 0x0, 0x0, 0x0, 0x4c, 0x0 } + {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */ + {V4l2_SLICED_VITC_625,6,22,0}, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, + 0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } }, - {0x170, /* VITC, NTSC 6 */ - { 0x0, 0x0, 0x0, 0x0 , 0x0, 0x8f, 0x6d, 0x49, 0x69, 0x94, 0x08, 0x0, 0x0, 0x0, 0x4c, 0x0 } + {0x170, /* Vertical Interval Timecode (VITC), NTSC */ + {V4l2_SLICED_VITC_525,10,20,0}, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49, + 0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 } }, + {0x190, /* Video Program System (VPS), PAL */ + {V4L2_SLICED_VPS,16,16,0}, + { 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d, + 0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 } + }, + /* 0x1d0 User programmable */ + + /* End of struct */ { (u16)-1 } }; static int tvp5150_write_inittab(struct i2c_client *c, - const struct i2c_reg_value *regs) + const struct i2c_reg_value *regs) { while (regs->reg != 0xff) { tvp5150_write(c, regs->reg, regs->value); @@ -686,15 +582,15 @@ static int tvp5150_write_inittab(struct i2c_client *c, } static int tvp5150_vdp_init(struct i2c_client *c, - const struct i2c_vbi_ram_value *regs) + const struct i2c_vbi_ram_value *regs) { unsigned int i; /* Disable Full Field */ - tvp5150_write(c, TVP5150_FULL_FIELD_ENA_1, 0); + tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0); /* Before programming, Line mode should be at 0xff */ - for (i=TVP5150_FULL_FIELD_ENA_2; i<=TVP5150_LINE_MODE_REG_44; i++) + for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++) tvp5150_write(c, i, 0xff); /* Load Ram Table */ @@ -710,6 +606,117 @@ static int tvp5150_vdp_init(struct i2c_client *c, return 0; } +/* Fills VBI capabilities based on i2c_vbi_ram_value struct */ +static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs, + struct v4l2_sliced_vbi_cap *cap) +{ + int line; + + memset(cap, 0, sizeof *cap); + + while (regs->reg != (u16)-1 ) { + for (line=regs->type.ini_line;line<=regs->type.end_line;line++) { + cap->service_lines[0][line] |= regs->type.vbi_type; + } + cap->service_set |= regs->type.vbi_type; + + regs++; + } +} + +/* Set vbi processing + * type - one of tvp5150_vbi_types + * line - line to gather data + * fields: bit 0 field1, bit 1, field2 + * flags (default=0xf0) is a bitmask, were set means: + * bit 7: enable filtering null bytes on CC + * bit 6: send data also to FIFO + * bit 5: don't allow data with errors on FIFO + * bit 4: enable ECC when possible + * pix_align = pix alignment: + * LSB = field1 + * MSB = field2 + */ +static int tvp5150_set_vbi(struct i2c_client *c, + const struct i2c_vbi_ram_value *regs, + unsigned int type,u8 flags, int line, + const int fields) +{ + struct tvp5150 *decoder = i2c_get_clientdata(c); + v4l2_std_id std=decoder->norm; + u8 reg; + int pos=0; + + if (std == V4L2_STD_ALL) { + tvp5150_err("VBI can't be configured without knowing number of lines\n"); + return 0; + } else if (std && V4L2_STD_625_50) { + /* Don't follow NTSC Line number convension */ + line += 3; + } + + if (line<6||line>27) + return 0; + + while (regs->reg != (u16)-1 ) { + if ((type & regs->type.vbi_type) && + (line>=regs->type.ini_line) && + (line<=regs->type.end_line)) { + type=regs->type.vbi_type; + break; + } + + regs++; + pos++; + } + if (regs->reg == (u16)-1) + return 0; + + type=pos | (flags & 0xf0); + reg=((line-6)<<1)+TVP5150_LINE_MODE_INI; + + if (fields&1) { + tvp5150_write(c, reg, type); + } + + if (fields&2) { + tvp5150_write(c, reg+1, type); + } + + return type; +} + +static int tvp5150_get_vbi(struct i2c_client *c, + const struct i2c_vbi_ram_value *regs, int line) +{ + struct tvp5150 *decoder = i2c_get_clientdata(c); + v4l2_std_id std=decoder->norm; + u8 reg; + int pos, type=0; + + if (std == V4L2_STD_ALL) { + tvp5150_err("VBI can't be configured without knowing number of lines\n"); + return 0; + } else if (std && V4L2_STD_625_50) { + /* Don't follow NTSC Line number convension */ + line += 3; + } + + if (line<6||line>27) + return 0; + + reg=((line-6)<<1)+TVP5150_LINE_MODE_INI; + + pos=tvp5150_read(c, reg)&0x0f; + if (pos<0x0f) + type=regs[pos].type.vbi_type; + + pos=tvp5150_read(c, reg+1)&0x0f; + if (pos<0x0f) + type|=regs[pos].type.vbi_type; + + return type; +} static int tvp5150_set_std(struct i2c_client *c, v4l2_std_id std) { struct tvp5150 *decoder = i2c_get_clientdata(c); @@ -854,6 +861,69 @@ static int tvp5150_command(struct i2c_client *c, *(v4l2_std_id *)arg = decoder->norm; break; + case VIDIOC_G_SLICED_VBI_CAP: + { + struct v4l2_sliced_vbi_cap *cap = arg; + tvp5150_dbg(1, "VIDIOC_G_SLICED_VBI_CAP\n"); + + tvp5150_vbi_get_cap(vbi_ram_default, cap); + break; + } + case VIDIOC_S_FMT: + { + struct v4l2_format *fmt; + struct v4l2_sliced_vbi_format *svbi; + int i; + + fmt = arg; + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + svbi = &fmt->fmt.sliced; + if (svbi->service_set != 0) { + for (i = 0; i <= 23; i++) { + svbi->service_lines[1][i] = 0; + + svbi->service_lines[0][i]=tvp5150_set_vbi(c, + vbi_ram_default, + svbi->service_lines[0][i],0xf0,i,3); + } + /* Enables FIFO */ + tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,1); + } else { + /* Disables FIFO*/ + tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,0); + + /* Disable Full Field */ + tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0); + + /* Disable Line modes */ + for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++) + tvp5150_write(c, i, 0xff); + } + break; + } + case VIDIOC_G_FMT: + { + struct v4l2_format *fmt; + struct v4l2_sliced_vbi_format *svbi; + + int i, mask=0; + + fmt = arg; + if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) + return -EINVAL; + svbi = &fmt->fmt.sliced; + memset(svbi, 0, sizeof(*svbi)); + + for (i = 0; i <= 23; i++) { + svbi->service_lines[0][i]=tvp5150_get_vbi(c, + vbi_ram_default,i); + mask|=svbi->service_lines[0][i]; + } + svbi->service_set=mask; + break; + } + #ifdef CONFIG_VIDEO_ADV_DEBUG case VIDIOC_INT_G_REGISTER: { @@ -878,6 +948,7 @@ static int tvp5150_command(struct i2c_client *c, } #endif + case VIDIOC_LOG_STATUS: case DECODER_DUMP: dump_reg(c); break; @@ -1097,7 +1168,7 @@ static int tvp5150_detect_client(struct i2c_adapter *adapter, rv = i2c_attach_client(c); - core->norm = V4L2_STD_ALL; + core->norm = V4L2_STD_ALL; /* Default is autodetect */ core->input = 2; core->enable = 1; core->bright = 32768; diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/video/tvp5150_reg.h index cd45c1ded786..4240043c0b2a 100644 --- a/drivers/media/video/tvp5150_reg.h +++ b/drivers/media/video/tvp5150_reg.h @@ -1,3 +1,10 @@ +/* + * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder registers + * + * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org) + * This code is placed under the terms of the GNU General Public License v2 + */ + #define TVP5150_VD_IN_SRC_SEL_1 0x00 /* Video input source selection #1 */ #define TVP5150_ANAL_CHL_CTL 0x01 /* Analog channel controls */ #define TVP5150_OP_MODE_CTL 0x02 /* Operation mode controls */ @@ -64,49 +71,32 @@ #define TVP5150_STATUS_REG_4 0x8b /* Status register #4 */ #define TVP5150_STATUS_REG_5 0x8c /* Status register #5 */ /* Reserved 8Dh-8Fh */ -#define TVP5150_CC_DATA_REG1 0x90 /* Closed caption data registers */ -#define TVP5150_CC_DATA_REG2 0x91 /* Closed caption data registers */ -#define TVP5150_CC_DATA_REG3 0x92 /* Closed caption data registers */ -#define TVP5150_CC_DATA_REG4 0x93 /* Closed caption data registers */ -#define TVP5150_WSS_DATA_REG1 0X94 /* WSS data registers */ -#define TVP5150_WSS_DATA_REG2 0X95 /* WSS data registers */ -#define TVP5150_WSS_DATA_REG3 0X96 /* WSS data registers */ -#define TVP5150_WSS_DATA_REG4 0X97 /* WSS data registers */ -#define TVP5150_WSS_DATA_REG5 0X98 /* WSS data registers */ -#define TVP5150_WSS_DATA_REG6 0X99 /* WSS data registers */ -#define TVP5150_VPS_DATA_REG1 0x9a /* VPS data registers */ -#define TVP5150_VPS_DATA_REG2 0x9b /* VPS data registers */ -#define TVP5150_VPS_DATA_REG3 0x9c /* VPS data registers */ -#define TVP5150_VPS_DATA_REG4 0x9d /* VPS data registers */ -#define TVP5150_VPS_DATA_REG5 0x9e /* VPS data registers */ -#define TVP5150_VPS_DATA_REG6 0x9f /* VPS data registers */ -#define TVP5150_VPS_DATA_REG7 0xa0 /* VPS data registers */ -#define TVP5150_VPS_DATA_REG8 0xa1 /* VPS data registers */ -#define TVP5150_VPS_DATA_REG9 0xa2 /* VPS data registers */ -#define TVP5150_VPS_DATA_REG10 0xa3 /* VPS data registers */ -#define TVP5150_VPS_DATA_REG11 0xa4 /* VPS data registers */ -#define TVP5150_VPS_DATA_REG12 0xa5 /* VPS data registers */ -#define TVP5150_VPS_DATA_REG13 0xa6 /* VPS data registers */ -#define TVP5150_VITC_DATA_REG1 0xa7 /* VITC data registers */ -#define TVP5150_VITC_DATA_REG2 0xa8 /* VITC data registers */ -#define TVP5150_VITC_DATA_REG3 0xa9 /* VITC data registers */ -#define TVP5150_VITC_DATA_REG4 0xaa /* VITC data registers */ -#define TVP5150_VITC_DATA_REG5 0xab /* VITC data registers */ -#define TVP5150_VITC_DATA_REG6 0xac /* VITC data registers */ -#define TVP5150_VITC_DATA_REG7 0xad /* VITC data registers */ -#define TVP5150_VITC_DATA_REG8 0xae /* VITC data registers */ -#define TVP5150_VITC_DATA_REG9 0xaf /* VITC data registers */ + /* Closed caption data registers */ +#define TVP5150_CC_DATA_INI 0x90 +#define TVP5150_CC_DATA_END 0x93 + + /* WSS data registers */ +#define TVP5150_WSS_DATA_INI 0x94 +#define TVP5150_WSS_DATA_END 0x99 + +/* VPS data registers */ +#define TVP5150_VPS_DATA_INI 0x9a +#define TVP5150_VPS_DATA_END 0xa6 + +/* VITC data registers */ +#define TVP5150_VITC_DATA_INI 0xa7 +#define TVP5150_VITC_DATA_END 0xaf + #define TVP5150_VBI_FIFO_READ_DATA 0xb0 /* VBI FIFO read data */ -#define TVP5150_TELETEXT_FIL_1_1 0xb1 /* Teletext filter 1 */ -#define TVP5150_TELETEXT_FIL_1_2 0xb2 /* Teletext filter 1 */ -#define TVP5150_TELETEXT_FIL_1_3 0xb3 /* Teletext filter 1 */ -#define TVP5150_TELETEXT_FIL_1_4 0xb4 /* Teletext filter 1 */ -#define TVP5150_TELETEXT_FIL_1_5 0xb5 /* Teletext filter 1 */ -#define TVP5150_TELETEXT_FIL_2_1 0xb6 /* Teletext filter 2 */ -#define TVP5150_TELETEXT_FIL_2_2 0xb7 /* Teletext filter 2 */ -#define TVP5150_TELETEXT_FIL_2_3 0xb8 /* Teletext filter 2 */ -#define TVP5150_TELETEXT_FIL_2_4 0xb9 /* Teletext filter 2 */ -#define TVP5150_TELETEXT_FIL_2_5 0xba /* Teletext filter 2 */ + +/* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL1_INI 0xb1 +#define TVP5150_TELETEXT_FIL1_END 0xb5 + +/* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL2_INI 0xb6 +#define TVP5150_TELETEXT_FIL2_END 0xba + #define TVP5150_TELETEXT_FIL_ENA 0xbb /* Teletext filter enable */ /* Reserved BCh-BFh */ #define TVP5150_INT_STATUS_REG_A 0xc0 /* Interrupt status register A */ @@ -124,50 +114,11 @@ #define TVP5150_PIX_ALIGN_REG_HIGH 0xcc /* Pixel alignment register high byte */ #define TVP5150_FIFO_OUT_CTRL 0xcd /* FIFO output control */ /* Reserved CEh */ -#define TVP5150_FULL_FIELD_ENA_1 0xcf /* Full field enable 1 */ -#define TVP5150_FULL_FIELD_ENA_2 0xd0 /* Full field enable 2 */ -#define TVP5150_LINE_MODE_REG_1 0xd1 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_2 0xd2 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_3 0xd3 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_4 0xd4 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_5 0xd5 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_6 0xd6 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_7 0xd7 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_8 0xd8 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_9 0xd9 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_10 0xda /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_11 0xdb /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_12 0xdc /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_13 0xdd /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_14 0xde /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_15 0xdf /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_16 0xe0 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_17 0xe1 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_18 0xe2 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_19 0xe3 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_20 0xe4 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_21 0xe5 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_22 0xe6 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_23 0xe7 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_24 0xe8 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_25 0xe9 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_27 0xea /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_28 0xeb /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_29 0xec /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_30 0xed /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_31 0xee /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_32 0xef /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_33 0xf0 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_34 0xf1 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_35 0xf2 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_36 0xf3 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_37 0xf4 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_38 0xf5 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_39 0xf6 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_40 0xf7 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_41 0xf8 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_42 0xf9 /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_43 0xfa /* Line mode registers */ -#define TVP5150_LINE_MODE_REG_44 0xfb /* Line mode registers */ +#define TVP5150_FULL_FIELD_ENA 0xcf /* Full field enable 1 */ + +/* Line mode registers */ +#define TVP5150_LINE_MODE_INI 0xd0 +#define TVP5150_LINE_MODE_END 0xfb + #define TVP5150_FULL_FIELD_MODE_REG 0xfc /* Full field mode register */ /* Reserved FDh-FFh */ diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile new file mode 100644 index 000000000000..ed410a5ee8c9 --- /dev/null +++ b/drivers/media/video/usbvideo/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_USB_IBMCAM) += ibmcam.o usbvideo.o ultracam.o +obj-$(CONFIG_USB_KONICAWC) += konicawc.o usbvideo.o +obj-$(CONFIG_USB_VICAM) += vicam.o usbvideo.o + diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c new file mode 100644 index 000000000000..76f771b6a32f --- /dev/null +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -0,0 +1,3932 @@ +/* + * USB IBM C-It Video Camera driver + * + * Supports Xirlink C-It Video Camera, IBM PC Camera, + * IBM NetCamera and Veo Stingray. + * + * This driver is based on earlier work of: + * + * (C) Copyright 1999 Johannes Erdfelt + * (C) Copyright 1999 Randy Dunlap + * + * 5/24/00 Removed optional (and unnecessary) locking of the driver while + * the device remains plugged in. Corrected race conditions in ibmcam_open + * and ibmcam_probe() routines using this as a guideline: + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/init.h> + +#include "usbvideo.h" + +#define IBMCAM_VENDOR_ID 0x0545 +#define IBMCAM_PRODUCT_ID 0x8080 +#define NETCAM_PRODUCT_ID 0x8002 /* IBM NetCamera, close to model 2 */ +#define VEO_800C_PRODUCT_ID 0x800C /* Veo Stingray, repackaged Model 2 */ +#define VEO_800D_PRODUCT_ID 0x800D /* Veo Stingray, repackaged Model 4 */ + +#define MAX_IBMCAM 4 /* How many devices we allow to connect */ +#define USES_IBMCAM_PUTPIXEL 0 /* 0=Fast/oops 1=Slow/secure */ + +/* Header signatures */ + +/* Model 1 header: 00 FF 00 xx */ +#define HDRSIG_MODEL1_128x96 0x06 /* U Y V Y ... */ +#define HDRSIG_MODEL1_176x144 0x0e /* U Y V Y ... */ +#define HDRSIG_MODEL1_352x288 0x00 /* V Y U Y ... */ + +#define IBMCAM_MODEL_1 1 /* XVP-501, 3 interfaces, rev. 0.02 */ +#define IBMCAM_MODEL_2 2 /* KSX-X9903, 2 interfaces, rev. 3.0a */ +#define IBMCAM_MODEL_3 3 /* KSX-X9902, 2 interfaces, rev. 3.01 */ +#define IBMCAM_MODEL_4 4 /* IBM NetCamera, 0545/8002/3.0a */ + +/* Video sizes supported */ +#define VIDEOSIZE_128x96 VIDEOSIZE(128, 96) +#define VIDEOSIZE_176x144 VIDEOSIZE(176,144) +#define VIDEOSIZE_352x288 VIDEOSIZE(352,288) +#define VIDEOSIZE_320x240 VIDEOSIZE(320,240) +#define VIDEOSIZE_352x240 VIDEOSIZE(352,240) +#define VIDEOSIZE_640x480 VIDEOSIZE(640,480) +#define VIDEOSIZE_160x120 VIDEOSIZE(160,120) + +/* Video sizes supported */ +enum { + SIZE_128x96 = 0, + SIZE_160x120, + SIZE_176x144, + SIZE_320x240, + SIZE_352x240, + SIZE_352x288, + SIZE_640x480, + /* Add/remove/rearrange items before this line */ + SIZE_LastItem +}; + +/* + * This structure lives in uvd->user field. + */ +typedef struct { + int initialized; /* Had we already sent init sequence? */ + int camera_model; /* What type of IBM camera we got? */ + int has_hdr; +} ibmcam_t; +#define IBMCAM_T(uvd) ((ibmcam_t *)((uvd)->user_data)) + +static struct usbvideo *cams; + +static int debug; + +static int flags; /* = FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */ + +static const int min_canvasWidth = 8; +static const int min_canvasHeight = 4; + +static int lighting = 1; /* Medium */ + +#define SHARPNESS_MIN 0 +#define SHARPNESS_MAX 6 +static int sharpness = 4; /* Low noise, good details */ + +#define FRAMERATE_MIN 0 +#define FRAMERATE_MAX 6 +static int framerate = -1; + +static int size = SIZE_352x288; + +/* + * Here we define several initialization variables. They may + * be used to automatically set color, hue, brightness and + * contrast to desired values. This is particularly useful in + * case of webcams (which have no controls and no on-screen + * output) and also when a client V4L software is used that + * does not have some of those controls. In any case it's + * good to have startup values as options. + * + * These values are all in [0..255] range. This simplifies + * operation. Note that actual values of V4L variables may + * be scaled up (as much as << 8). User can see that only + * on overlay output, however, or through a V4L client. + */ +static int init_brightness = 128; +static int init_contrast = 192; +static int init_color = 128; +static int init_hue = 128; +static int hue_correction = 128; + +/* Settings for camera model 2 */ +static int init_model2_rg2 = -1; +static int init_model2_sat = -1; +static int init_model2_yb = -1; + +/* 01.01.08 - Added for RCA video in support -LO */ +/* Settings for camera model 3 */ +static int init_model3_input = 0; + +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); +module_param(flags, int, 0); +MODULE_PARM_DESC(flags, "Bitfield: 0=VIDIOCSYNC, 1=B/W, 2=show hints, 3=show stats, 4=test pattern, 5=separate frames, 6=clean frames"); +module_param(framerate, int, 0); +MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)"); +module_param(lighting, int, 0); +MODULE_PARM_DESC(lighting, "Photosensitivity: 0=bright, 1=medium (default), 2=low light"); +module_param(sharpness, int, 0); +MODULE_PARM_DESC(sharpness, "Model1 noise reduction: 0=smooth, 6=sharp (default=4)"); +module_param(size, int, 0); +MODULE_PARM_DESC(size, "Image size: 0=128x96 1=160x120 2=176x144 3=320x240 4=352x240 5=352x288 6=640x480 (default=5)"); +module_param(init_brightness, int, 0); +MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)"); +module_param(init_contrast, int, 0); +MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)"); +module_param(init_color, int, 0); +MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)"); +module_param(init_hue, int, 0); +MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)"); +module_param(hue_correction, int, 0); +MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)"); + +module_param(init_model2_rg2, int, 0); +MODULE_PARM_DESC(init_model2_rg2, "Model2 preconfiguration: 0-255 (default=47)"); +module_param(init_model2_sat, int, 0); +MODULE_PARM_DESC(init_model2_sat, "Model2 preconfiguration: 0-255 (default=52)"); +module_param(init_model2_yb, int, 0); +MODULE_PARM_DESC(init_model2_yb, "Model2 preconfiguration: 0-255 (default=160)"); + +/* 01.01.08 - Added for RCA video in support -LO */ +module_param(init_model3_input, int, 0); +MODULE_PARM_DESC(init_model3_input, "Model3 input: 0=CCD 1=RCA"); + +MODULE_AUTHOR ("Dmitri"); +MODULE_DESCRIPTION ("IBM/Xirlink C-it USB Camera Driver for Linux (c) 2000"); +MODULE_LICENSE("GPL"); + +/* Still mysterious i2c commands */ +static const unsigned short unknown_88 = 0x0088; +static const unsigned short unknown_89 = 0x0089; +static const unsigned short bright_3x[3] = { 0x0031, 0x0032, 0x0033 }; +static const unsigned short contrast_14 = 0x0014; +static const unsigned short light_27 = 0x0027; +static const unsigned short sharp_13 = 0x0013; + +/* i2c commands for Model 2 cameras */ +static const unsigned short mod2_brightness = 0x001a; /* $5b .. $ee; default=$5a */ +static const unsigned short mod2_set_framerate = 0x001c; /* 0 (fast).. $1F (slow) */ +static const unsigned short mod2_color_balance_rg2 = 0x001e; /* 0 (red) .. $7F (green) */ +static const unsigned short mod2_saturation = 0x0020; /* 0 (b/w) - $7F (full color) */ +static const unsigned short mod2_color_balance_yb = 0x0022; /* 0..$7F, $50 is about right */ +static const unsigned short mod2_hue = 0x0024; /* 0..$7F, $70 is about right */ +static const unsigned short mod2_sensitivity = 0x0028; /* 0 (min) .. $1F (max) */ + +struct struct_initData { + unsigned char req; + unsigned short value; + unsigned short index; +}; + +/* + * ibmcam_size_to_videosize() + * + * This procedure converts module option 'size' into the actual + * videosize_t that defines the image size in pixels. We need + * simplified 'size' because user wants a simple enumerated list + * of choices, not an infinite set of possibilities. + */ +static videosize_t ibmcam_size_to_videosize(int size) +{ + videosize_t vs = VIDEOSIZE_352x288; + RESTRICT_TO_RANGE(size, 0, (SIZE_LastItem-1)); + switch (size) { + case SIZE_128x96: + vs = VIDEOSIZE_128x96; + break; + case SIZE_160x120: + vs = VIDEOSIZE_160x120; + break; + case SIZE_176x144: + vs = VIDEOSIZE_176x144; + break; + case SIZE_320x240: + vs = VIDEOSIZE_320x240; + break; + case SIZE_352x240: + vs = VIDEOSIZE_352x240; + break; + case SIZE_352x288: + vs = VIDEOSIZE_352x288; + break; + case SIZE_640x480: + vs = VIDEOSIZE_640x480; + break; + default: + err("size=%d. is not valid", size); + break; + } + return vs; +} + +/* + * ibmcam_find_header() + * + * Locate one of supported header markers in the queue. + * Once found, remove all preceding bytes AND the marker (4 bytes) + * from the data pump queue. Whatever follows must be video lines. + * + * History: + * 1/21/00 Created. + */ +static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */ +{ + struct usbvideo_frame *frame; + ibmcam_t *icam; + + if ((uvd->curframe) < 0 || (uvd->curframe >= USBVIDEO_NUMFRAMES)) { + err("ibmcam_find_header: Illegal frame %d.", uvd->curframe); + return scan_EndParse; + } + icam = IBMCAM_T(uvd); + assert(icam != NULL); + frame = &uvd->frame[uvd->curframe]; + icam->has_hdr = 0; + switch (icam->camera_model) { + case IBMCAM_MODEL_1: + { + const int marker_len = 4; + while (RingQueue_GetLength(&uvd->dp) >= marker_len) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) && + (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00)) + { +#if 0 /* This code helps to detect new frame markers */ + info("Header sig: 00 FF 00 %02X", RING_QUEUE_PEEK(&uvd->dp, 3)); +#endif + frame->header = RING_QUEUE_PEEK(&uvd->dp, 3); + if ((frame->header == HDRSIG_MODEL1_128x96) || + (frame->header == HDRSIG_MODEL1_176x144) || + (frame->header == HDRSIG_MODEL1_352x288)) + { +#if 0 + info("Header found."); +#endif + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); + icam->has_hdr = 1; + break; + } + } + /* If we are still here then this doesn't look like a header */ + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + } + break; + } + case IBMCAM_MODEL_2: +case IBMCAM_MODEL_4: + { + int marker_len = 0; + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + marker_len = 10; + break; + default: + marker_len = 2; + break; + } + while (RingQueue_GetLength(&uvd->dp) >= marker_len) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF)) + { +#if 0 + info("Header found."); +#endif + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); + icam->has_hdr = 1; + frame->header = HDRSIG_MODEL1_176x144; + break; + } + /* If we are still here then this doesn't look like a header */ + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + } + break; + } + case IBMCAM_MODEL_3: + { /* + * Headers: (one precedes every frame). nc=no compression, + * bq=best quality bf=best frame rate. + * + * 176x144: 00 FF 02 { 0A=nc CA=bq EA=bf } + * 320x240: 00 FF 02 { 08=nc 28=bq 68=bf } + * 640x480: 00 FF 03 { 08=nc 28=bq 68=bf } + * + * Bytes '00 FF' seem to indicate header. Other two bytes + * encode the frame type. This is a set of bit fields that + * encode image size, compression type etc. These fields + * do NOT contain frame number because all frames carry + * the same header. + */ + const int marker_len = 4; + while (RingQueue_GetLength(&uvd->dp) >= marker_len) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) && + (RING_QUEUE_PEEK(&uvd->dp, 2) != 0xFF)) + { + /* + * Combine 2 bytes of frame type into one + * easy to use value + */ + unsigned long byte3, byte4; + + byte3 = RING_QUEUE_PEEK(&uvd->dp, 2); + byte4 = RING_QUEUE_PEEK(&uvd->dp, 3); + frame->header = (byte3 << 8) | byte4; +#if 0 + info("Header found."); +#endif + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len); + icam->has_hdr = 1; + break; + } + /* If we are still here then this doesn't look like a header */ + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + } + break; + } + default: + break; + } + if (!icam->has_hdr) { + if (uvd->debug > 2) + info("Skipping frame, no header"); + return scan_EndParse; + } + + /* Header found */ + icam->has_hdr = 1; + uvd->stats.header_count++; + frame->scanstate = ScanState_Lines; + frame->curline = 0; + + if (flags & FLAGS_FORCE_TESTPATTERN) { + usbvideo_TestPattern(uvd, 1, 1); + return scan_NextFrame; + } + return scan_Continue; +} + +/* + * ibmcam_parse_lines() + * + * Parse one line (interlaced) from the buffer, put + * decoded RGB value into the current frame buffer + * and add the written number of bytes (RGB) to + * the *pcopylen. + * + * History: + * 21-Jan-2000 Created. + * 12-Oct-2000 Reworked to reflect interlaced nature of the data. + */ +static enum ParseState ibmcam_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + unsigned char *f; + ibmcam_t *icam; + unsigned int len, scanLength, scanHeight, order_uv, order_yc; + int v4l_linesize; /* V4L line offset */ + const int hue_corr = (uvd->vpic.hue - 0x8000) >> 10; /* -32..+31 */ + const int hue2_corr = (hue_correction - 128) / 4; /* -32..+31 */ + const int ccm = 128; /* Color correction median - see below */ + int y, u, v, i, frame_done=0, color_corr; + static unsigned char lineBuffer[640*3]; + unsigned const char *chromaLine, *lumaLine; + + assert(uvd != NULL); + assert(frame != NULL); + icam = IBMCAM_T(uvd); + assert(icam != NULL); + color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ + RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1); + + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + if (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_4) { + /* Model 4 frame markers do not carry image size identification */ + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + case VIDEOSIZE_160x120: + case VIDEOSIZE_176x144: + scanLength = VIDEOSIZE_X(uvd->videosize); + scanHeight = VIDEOSIZE_Y(uvd->videosize); + break; + default: + err("ibmcam_parse_lines: Wrong mode."); + return scan_Out; + } + order_yc = 1; /* order_yc: true=Yc false=cY ('c'=either U or V) */ + order_uv = 1; /* Always true in this algorithm */ + } else { + switch (frame->header) { + case HDRSIG_MODEL1_128x96: + scanLength = 128; + scanHeight = 96; + order_uv = 1; /* U Y V Y ... */ + break; + case HDRSIG_MODEL1_176x144: + scanLength = 176; + scanHeight = 144; + order_uv = 1; /* U Y V Y ... */ + break; + case HDRSIG_MODEL1_352x288: + scanLength = 352; + scanHeight = 288; + order_uv = 0; /* Y V Y V ... */ + break; + default: + err("Unknown header signature 00 FF 00 %02lX", frame->header); + return scan_NextFrame; + } + /* order_yc: true=Yc false=cY ('c'=either U or V) */ + order_yc = (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_2); + } + + len = scanLength * 3; + assert(len <= sizeof(lineBuffer)); + + /* + * Lines are organized this way: + * + * I420: + * ~~~~ + * <scanLength-> + * ___________________________________ + * |-----Y-----|---UVUVUV...UVUV-----| \ + * |-----------+---------------------| \ + * |<-- 176 -->|<------ 176*2 ------>| Total 72. lines (interlaced) + * |... ... | ... | / + * |<-- 352 -->|<------ 352*2 ------>| Total 144. lines (interlaced) + * |___________|_____________________| / + * \ \ + * lumaLine chromaLine + */ + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Mind that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request)) + return scan_NextFrame; + + /* + * Now we are sure that entire line (representing all 'scanLength' + * pixels from the camera) is available in the buffer. We + * start copying the line left-aligned to the V4L buffer. + * If the camera line is shorter then we should pad the V4L + * buffer with something (black) to complete the line. + */ + assert(frame->data != NULL); + f = frame->data + (v4l_linesize * frame->curline); + + /* + * To obtain chrominance data from the 'chromaLine' use this: + * v = chromaLine[0]; // 0-1:[0], 2-3:[4], 4-5:[8]... + * u = chromaLine[2]; // 0-1:[2], 2-3:[6], 4-5:[10]... + * + * Indices must be calculated this way: + * v_index = (i >> 1) << 2; + * u_index = (i >> 1) << 2 + 2; + * + * where 'i' is the column number [0..VIDEOSIZE_X(frame->request)-1] + */ + lumaLine = lineBuffer; + chromaLine = lineBuffer + scanLength; + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) + { + unsigned char rv, gv, bv; /* RGB components */ + + /* Check for various visual debugging hints (colorized pixels) */ + if ((flags & FLAGS_DISPLAY_HINTS) && (icam->has_hdr)) { + /* + * This is bad and should not happen. This means that + * we somehow overshoot the line and encountered new + * frame! Obviously our camera/V4L frame size is out + * of whack. This cyan dot will help you to figure + * out where exactly the new frame arrived. + */ + if (icam->has_hdr == 1) { + bv = 0; /* Yellow marker */ + gv = 0xFF; + rv = 0xFF; + } else { + bv = 0xFF; /* Cyan marker */ + gv = 0xFF; + rv = 0; + } + icam->has_hdr = 0; + goto make_pixel; + } + + /* + * Check if we are still in range. We may be out of range if our + * V4L canvas is wider or taller than the camera "native" image. + * Then we quickly fill the remainder of the line with zeros to + * make black color and quit the horizontal scanning loop. + */ + if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) { + const int j = i * V4L_BYTES_PER_PIXEL; +#if USES_IBMCAM_PUTPIXEL + /* Refresh 'f' because we don't use it much with PUTPIXEL */ + f = frame->data + (v4l_linesize * frame->curline) + j; +#endif + memset(f, 0, v4l_linesize - j); + break; + } + + y = lumaLine[i]; + if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */ + rv = gv = bv = y; + else { + int off_0, off_2; + + off_0 = (i >> 1) << 2; + off_2 = off_0 + 2; + + if (order_yc) { + off_0++; + off_2++; + } + if (!order_uv) { + off_0 += 2; + off_2 -= 2; + } + u = chromaLine[off_0] + hue_corr; + v = chromaLine[off_2] + hue2_corr; + + /* Apply color correction */ + if (color_corr != 0) { + /* Magnify up to 2 times, reduce down to zero saturation */ + u = 128 + ((ccm + color_corr) * (u - 128)) / ccm; + v = 128 + ((ccm + color_corr) * (v - 128)) / ccm; + } + YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv); + } + + make_pixel: + /* + * The purpose of creating the pixel here, in one, + * dedicated place is that we may need to make the + * pixel wider and taller than it actually is. This + * may be used if camera generates small frames for + * sake of frame rate (or any other reason.) + * + * The output data consists of B, G, R bytes + * (in this order). + */ +#if USES_IBMCAM_PUTPIXEL + RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv); +#else + *f++ = bv; + *f++ = gv; + *f++ = rv; +#endif + /* + * Typically we do not decide within a legitimate frame + * that we want to end the frame. However debugging code + * may detect marker of new frame within the data. Then + * this condition activates. The 'data' pointer is already + * pointing at the new marker, so we'd better leave it as is. + */ + if (frame_done) + break; /* End scanning of lines */ + } + /* + * Account for number of bytes that we wrote into output V4L frame. + * We do it here, after we are done with the scanline, because we + * may fill more than one output scanline if we do vertical + * enlargement. + */ + frame->curline += 2; + if (pcopylen != NULL) + *pcopylen += 2 * v4l_linesize; + frame->deinterlace = Deinterlace_FillOddLines; + + if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request))) + return scan_NextFrame; + else + return scan_Continue; +} + +/* + * ibmcam_model2_320x240_parse_lines() + * + * This procedure deals with a weird RGB format that is produced by IBM + * camera model 2 in modes 320x240 and above; 'x' below is 159 or 175, + * depending on horizontal size of the picture: + * + * <--- 160 or 176 pairs of RA,RB bytes -----> + * *-----------------------------------------* \ + * | RA0 | RB0 | RA1 | RB1 | ... | RAx | RBx | \ This is pair of horizontal lines, + * |-----+-----+-----+-----+ ... +-----+-----| *- or one interlaced line, total + * | B0 | G0 | B1 | G1 | ... | Bx | Gx | / 120 or 144 such pairs which yield + * |=====+=====+=====+=====+ ... +=====+=====| / 240 or 288 lines after deinterlacing. + * + * Each group of FOUR bytes (RAi, RBi, Bi, Gi) where i=0..frame_width/2-1 + * defines ONE pixel. Therefore this format yields 176x144 "decoded" + * resolution at best. I do not know why camera sends such format - the + * previous model (1) just used interlaced I420 and everyone was happy. + * + * I do not know what is the difference between RAi and RBi bytes. Both + * seemingly represent R component, but slightly vary in value (so that + * the picture looks a bit colored if one or another is used). I use + * them both as R component in attempt to at least partially recover the + * lost resolution. + */ +static enum ParseState ibmcam_model2_320x240_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + unsigned char *f, *la, *lb; + unsigned int len; + int v4l_linesize; /* V4L line offset */ + int i, j, frame_done=0, color_corr; + int scanLength, scanHeight; + static unsigned char lineBuffer[352*2]; + + switch (uvd->videosize) { + case VIDEOSIZE_320x240: + case VIDEOSIZE_352x240: + case VIDEOSIZE_352x288: + scanLength = VIDEOSIZE_X(uvd->videosize); + scanHeight = VIDEOSIZE_Y(uvd->videosize); + break; + default: + err("ibmcam_model2_320x240_parse_lines: Wrong mode."); + return scan_Out; + } + + color_corr = (uvd->vpic.colour) >> 8; /* 0..+255 */ + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + len = scanLength * 2; /* See explanation above */ + assert(len <= sizeof(lineBuffer)); + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Mind that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request)) + return scan_NextFrame; + + la = lineBuffer; + lb = lineBuffer + scanLength; + + /* + * Now we are sure that entire line (representing all + * VIDEOSIZE_X(frame->request) + * pixels from the camera) is available in the scratch buffer. We + * start copying the line left-aligned to the V4L buffer (which + * might be larger - not smaller, hopefully). If the camera + * line is shorter then we should pad the V4L buffer with something + * (black in this case) to complete the line. + */ + f = frame->data + (v4l_linesize * frame->curline); + + /* Fill the 2-line strip */ + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { + int y, rv, gv, bv; /* RGB components */ + + j = i & (~1); + + /* Check for various visual debugging hints (colorized pixels) */ + if ((flags & FLAGS_DISPLAY_HINTS) && (IBMCAM_T(uvd)->has_hdr)) { + if (IBMCAM_T(uvd)->has_hdr == 1) { + bv = 0; /* Yellow marker */ + gv = 0xFF; + rv = 0xFF; + } else { + bv = 0xFF; /* Cyan marker */ + gv = 0xFF; + rv = 0; + } + IBMCAM_T(uvd)->has_hdr = 0; + goto make_pixel; + } + + /* + * Check if we are still in range. We may be out of range if our + * V4L canvas is wider or taller than the camera "native" image. + * Then we quickly fill the remainder of the line with zeros to + * make black color and quit the horizontal scanning loop. + */ + if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) { + const int j = i * V4L_BYTES_PER_PIXEL; +#if USES_IBMCAM_PUTPIXEL + /* Refresh 'f' because we don't use it much with PUTPIXEL */ + f = frame->data + (v4l_linesize * frame->curline) + j; +#endif + memset(f, 0, v4l_linesize - j); + break; + } + + /* + * Here I use RA and RB components, one per physical pixel. + * This causes fine vertical grid on the picture but may improve + * horizontal resolution. If you prefer replicating, use this: + * rv = la[j + 0]; ... or ... rv = la[j + 1]; + * then the pixel will be replicated. + */ + rv = la[i]; + gv = lb[j + 1]; + bv = lb[j + 0]; + + y = (rv + gv + bv) / 3; /* Brightness (badly calculated) */ + + if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */ + rv = gv = bv = y; + else if (color_corr != 128) { + + /* Calculate difference between color and brightness */ + rv -= y; + gv -= y; + bv -= y; + + /* Scale differences */ + rv = (rv * color_corr) / 128; + gv = (gv * color_corr) / 128; + bv = (bv * color_corr) / 128; + + /* Reapply brightness */ + rv += y; + gv += y; + bv += y; + + /* Watch for overflows */ + RESTRICT_TO_RANGE(rv, 0, 255); + RESTRICT_TO_RANGE(gv, 0, 255); + RESTRICT_TO_RANGE(bv, 0, 255); + } + + make_pixel: + RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv); + } + /* + * Account for number of bytes that we wrote into output V4L frame. + * We do it here, after we are done with the scanline, because we + * may fill more than one output scanline if we do vertical + * enlargement. + */ + frame->curline += 2; + *pcopylen += v4l_linesize * 2; + frame->deinterlace = Deinterlace_FillOddLines; + + if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request))) + return scan_NextFrame; + else + return scan_Continue; +} + +static enum ParseState ibmcam_model3_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + unsigned char *data; + const unsigned char *color; + unsigned int len; + int v4l_linesize; /* V4L line offset */ + const int hue_corr = (uvd->vpic.hue - 0x8000) >> 10; /* -32..+31 */ + const int hue2_corr = (hue_correction - 128) / 4; /* -32..+31 */ + const int ccm = 128; /* Color correction median - see below */ + int i, u, v, rw, data_w=0, data_h=0, color_corr; + static unsigned char lineBuffer[640*3]; + + color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ + RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1); + + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + /* The header tells us what sort of data is in this frame */ + switch (frame->header) { + /* + * Uncompressed modes (that are easy to decode). + */ + case 0x0308: + data_w = 640; + data_h = 480; + break; + case 0x0208: + data_w = 320; + data_h = 240; + break; + case 0x020A: + data_w = 160; + data_h = 120; + break; + /* + * Compressed modes (ViCE - that I don't know how to decode). + */ + case 0x0328: /* 640x480, best quality compression */ + case 0x0368: /* 640x480, best frame rate compression */ + case 0x0228: /* 320x240, best quality compression */ + case 0x0268: /* 320x240, best frame rate compression */ + case 0x02CA: /* 160x120, best quality compression */ + case 0x02EA: /* 160x120, best frame rate compression */ + /* Do nothing with this - not supported */ + err("Unsupported mode $%04lx", frame->header); + return scan_NextFrame; + default: + /* Catch unknown headers, may help in learning new headers */ + err("Strange frame->header=$%08lx", frame->header); + return scan_NextFrame; + } + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Note that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 1) >= data_h) { + if (uvd->debug >= 3) + info("Reached line %d. (frame is done)", frame->curline); + return scan_NextFrame; + } + + /* Make sure there's enough data for the entire line */ + len = 3 * data_w; /* <y-data> <uv-data> */ + assert(len <= sizeof(lineBuffer)); + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + data = lineBuffer; + color = data + data_w; /* Point to where color planes begin */ + + /* Bottom-to-top scanning */ + rw = (int)VIDEOSIZE_Y(frame->request) - (int)(frame->curline) - 1; + RESTRICT_TO_RANGE(rw, 0, VIDEOSIZE_Y(frame->request)-1); + + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { + int y, rv, gv, bv; /* RGB components */ + + if (i < data_w) { + y = data[i]; /* Luminosity is the first line */ + + /* Apply static color correction */ + u = color[i*2] + hue_corr; + v = color[i*2 + 1] + hue2_corr; + + /* Apply color correction */ + if (color_corr != 0) { + /* Magnify up to 2 times, reduce down to zero saturation */ + u = 128 + ((ccm + color_corr) * (u - 128)) / ccm; + v = 128 + ((ccm + color_corr) * (v - 128)) / ccm; + } + } else + y = 0, u = v = 128; + + YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv); + RGB24_PUTPIXEL(frame, i, rw, rv, gv, bv); /* Done by deinterlacing now */ + } + frame->deinterlace = Deinterlace_FillEvenLines; + + /* + * Account for number of bytes that we wrote into output V4L frame. + * We do it here, after we are done with the scanline, because we + * may fill more than one output scanline if we do vertical + * enlargement. + */ + frame->curline += 2; + *pcopylen += 2 * v4l_linesize; + + if (frame->curline >= VIDEOSIZE_Y(frame->request)) { + if (uvd->debug >= 3) { + info("All requested lines (%ld.) done.", + VIDEOSIZE_Y(frame->request)); + } + return scan_NextFrame; + } else + return scan_Continue; +} + +/* + * ibmcam_model4_128x96_parse_lines() + * + * This decoder is for one strange data format that is produced by Model 4 + * camera only in 128x96 mode. This is RGB format and here is its description. + * First of all, this is non-interlaced stream, meaning that all scan lines + * are present in the datastream. There are 96 consecutive blocks of data + * that describe all 96 lines of the image. Each block is 5*128 bytes long + * and carries R, G, B components. The format of the block is shown in the + * code below. First 128*2 bytes are interleaved R and G components. Then + * we have a gap (junk data) 64 bytes long. Then follow B and something + * else, also interleaved (this makes another 128*2 bytes). After that + * probably another 64 bytes of junk follow. + * + * History: + * 10-Feb-2001 Created. + */ +static enum ParseState ibmcam_model4_128x96_parse_lines( + struct uvd *uvd, + struct usbvideo_frame *frame, + long *pcopylen) +{ + const unsigned char *data_rv, *data_gv, *data_bv; + unsigned int len; + int i, v4l_linesize; /* V4L line offset */ + const int data_w=128, data_h=96; + static unsigned char lineBuffer[128*5]; + + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + + /* + * Make sure that our writing into output buffer + * will not exceed the buffer. Note that we may write + * not into current output scanline but in several after + * it as well (if we enlarge image vertically.) + */ + if ((frame->curline + 1) >= data_h) { + if (uvd->debug >= 3) + info("Reached line %d. (frame is done)", frame->curline); + return scan_NextFrame; + } + + /* + * RGRGRG .... RGRG_____________B?B?B? ... B?B?____________ + * <---- 128*2 ---><---- 64 ---><--- 128*2 ---><--- 64 ---> + */ + + /* Make sure there's enough data for the entire line */ + len = 5 * data_w; + assert(len <= sizeof(lineBuffer)); + + /* Make sure there's enough data for the entire line */ + if (RingQueue_GetLength(&uvd->dp) < len) + return scan_Out; + + /* Suck one line out of the ring queue */ + RingQueue_Dequeue(&uvd->dp, lineBuffer, len); + + data_rv = lineBuffer; + data_gv = lineBuffer + 1; + data_bv = lineBuffer + data_w*2 + data_w/2; + for (i = 0; i < VIDEOSIZE_X(frame->request); i++) { + int rv, gv, bv; /* RGB components */ + if (i < data_w) { + const int j = i * 2; + gv = data_rv[j]; + rv = data_gv[j]; + bv = data_bv[j]; + if (flags & FLAGS_MONOCHROME) { + unsigned long y; + y = rv + gv + bv; + y /= 3; + if (y > 0xFF) + y = 0xFF; + rv = gv = bv = (unsigned char) y; + } + } else { + rv = gv = bv = 0; + } + RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv); + } + frame->deinterlace = Deinterlace_None; + frame->curline++; + *pcopylen += v4l_linesize; + + if (frame->curline >= VIDEOSIZE_Y(frame->request)) { + if (uvd->debug >= 3) { + info("All requested lines (%ld.) done.", + VIDEOSIZE_Y(frame->request)); + } + return scan_NextFrame; + } else + return scan_Continue; +} + +/* + * ibmcam_ProcessIsocData() + * + * Generic routine to parse the ring queue data. It employs either + * ibmcam_find_header() or ibmcam_parse_lines() to do most + * of work. + * + * History: + * 1/21/00 Created. + */ +static void ibmcam_ProcessIsocData(struct uvd *uvd, + struct usbvideo_frame *frame) +{ + enum ParseState newstate; + long copylen = 0; + int mod = IBMCAM_T(uvd)->camera_model; + + while (1) { + newstate = scan_Out; + if (RingQueue_GetLength(&uvd->dp) > 0) { + if (frame->scanstate == ScanState_Scanning) { + newstate = ibmcam_find_header(uvd); + } else if (frame->scanstate == ScanState_Lines) { + if ((mod == IBMCAM_MODEL_2) && + ((uvd->videosize == VIDEOSIZE_352x288) || + (uvd->videosize == VIDEOSIZE_320x240) || + (uvd->videosize == VIDEOSIZE_352x240))) + { + newstate = ibmcam_model2_320x240_parse_lines( + uvd, frame, ©len); + } else if (mod == IBMCAM_MODEL_4) { + /* + * Model 4 cameras (IBM NetCamera) use Model 2 decoder (RGB) + * for 320x240 and above; 160x120 and 176x144 uses Model 1 + * decoder (YUV), and 128x96 mode uses ??? + */ + if ((uvd->videosize == VIDEOSIZE_352x288) || + (uvd->videosize == VIDEOSIZE_320x240) || + (uvd->videosize == VIDEOSIZE_352x240)) + { + newstate = ibmcam_model2_320x240_parse_lines(uvd, frame, ©len); + } else if (uvd->videosize == VIDEOSIZE_128x96) { + newstate = ibmcam_model4_128x96_parse_lines(uvd, frame, ©len); + } else { + newstate = ibmcam_parse_lines(uvd, frame, ©len); + } + } else if (mod == IBMCAM_MODEL_3) { + newstate = ibmcam_model3_parse_lines(uvd, frame, ©len); + } else { + newstate = ibmcam_parse_lines(uvd, frame, ©len); + } + } + } + if (newstate == scan_Continue) + continue; + else if ((newstate == scan_NextFrame) || (newstate == scan_Out)) + break; + else + return; /* scan_EndParse */ + } + + if (newstate == scan_NextFrame) { + frame->frameState = FrameState_Done; + uvd->curframe = -1; + uvd->stats.frame_num++; + if ((mod == IBMCAM_MODEL_2) || (mod == IBMCAM_MODEL_4)) { + /* Need software contrast adjustment for those cameras */ + frame->flags |= USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST; + } + } + + /* Update the frame's uncompressed length. */ + frame->seqRead_Length += copylen; + +#if 0 + { + static unsigned char j=0; + memset(frame->data, j++, uvd->max_frame_size); + frame->frameState = FrameState_Ready; + } +#endif +} + +/* + * ibmcam_veio() + * + * History: + * 1/27/00 Added check for dev == NULL; this happens if camera is unplugged. + */ +static int ibmcam_veio( + struct uvd *uvd, + unsigned char req, + unsigned short value, + unsigned short index) +{ + static const char proc[] = "ibmcam_veio"; + unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */; + int i; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return 0; + + if (req == 1) { + i = usb_control_msg( + uvd->dev, + usb_rcvctrlpipe(uvd->dev, 0), + req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + value, + index, + cp, + sizeof(cp), + 1000); +#if 0 + info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); +#endif + } else { + i = usb_control_msg( + uvd->dev, + usb_sndctrlpipe(uvd->dev, 0), + req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, + value, + index, + NULL, + 0, + 1000); + } + if (i < 0) { + err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.", + proc, i); + uvd->last_error = i; + } + return i; +} + +/* + * ibmcam_calculate_fps() + * + * This procedure roughly calculates the real frame rate based + * on FPS code (framerate=NNN option). Actual FPS differs + * slightly depending on lighting conditions, so that actual frame + * rate is determined by the camera. Since I don't know how to ask + * the camera what FPS is now I have to use the FPS code instead. + * + * The FPS code is in range [0..6], 0 is slowest, 6 is fastest. + * Corresponding real FPS should be in range [3..30] frames per second. + * The conversion formula is obvious: + * + * real_fps = 3 + (fps_code * 4.5) + * + * History: + * 1/18/00 Created. + */ +static int ibmcam_calculate_fps(struct uvd *uvd) +{ + return 3 + framerate*4 + framerate/2; +} + +/* + * ibmcam_send_FF_04_02() + * + * This procedure sends magic 3-command prefix to the camera. + * The purpose of this prefix is not known. + * + * History: + * 1/2/00 Created. + */ +static void ibmcam_send_FF_04_02(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x00FF, 0x0127); + ibmcam_veio(uvd, 0, 0x0004, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); +} + +static void ibmcam_send_00_04_06(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x0004, 0x0124); + ibmcam_veio(uvd, 0, 0x0006, 0x0124); +} + +static void ibmcam_send_x_00(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); +} + +static void ibmcam_send_x_00_05(struct uvd *uvd, unsigned short x) +{ + ibmcam_send_x_00(uvd, x); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); +} + +static void ibmcam_send_x_00_05_02(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); +} + +static void ibmcam_send_x_01_00_05(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0001, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); +} + +static void ibmcam_send_x_00_05_02_01(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0124); +} + +static void ibmcam_send_x_00_05_02_08_01(struct uvd *uvd, unsigned short x) +{ + ibmcam_veio(uvd, 0, x, 0x0127); + ibmcam_veio(uvd, 0, 0x0000, 0x0124); + ibmcam_veio(uvd, 0, 0x0005, 0x0124); + ibmcam_veio(uvd, 0, 0x0002, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0124); +} + +static void ibmcam_Packet_Format1(struct uvd *uvd, unsigned char fkey, unsigned char val) +{ + ibmcam_send_x_01_00_05(uvd, unknown_88); + ibmcam_send_x_00_05(uvd, fkey); + ibmcam_send_x_00_05_02_08_01(uvd, val); + ibmcam_send_x_00_05(uvd, unknown_88); + ibmcam_send_x_00_05_02_01(uvd, fkey); + ibmcam_send_x_00_05(uvd, unknown_89); + ibmcam_send_x_00(uvd, fkey); + ibmcam_send_00_04_06(uvd); + ibmcam_veio(uvd, 1, 0x0000, 0x0126); + ibmcam_send_FF_04_02(uvd); +} + +static void ibmcam_PacketFormat2(struct uvd *uvd, unsigned char fkey, unsigned char val) +{ + ibmcam_send_x_01_00_05 (uvd, unknown_88); + ibmcam_send_x_00_05 (uvd, fkey); + ibmcam_send_x_00_05_02 (uvd, val); +} + +static void ibmcam_model2_Packet2(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x00ff, 0x012d); + ibmcam_veio(uvd, 0, 0xfea3, 0x0124); +} + +static void ibmcam_model2_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2) +{ + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x00ff, 0x012e); + ibmcam_veio(uvd, 0, v1, 0x012f); + ibmcam_veio(uvd, 0, 0x00ff, 0x0130); + ibmcam_veio(uvd, 0, 0xc719, 0x0124); + ibmcam_veio(uvd, 0, v2, 0x0127); + + ibmcam_model2_Packet2(uvd); +} + +/* + * ibmcam_model3_Packet1() + * + * 00_0078_012d + * 00_0097_012f + * 00_d141_0124 + * 00_0096_0127 + * 00_fea8_0124 +*/ +static void ibmcam_model3_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2) +{ + ibmcam_veio(uvd, 0, 0x0078, 0x012d); + ibmcam_veio(uvd, 0, v1, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, v2, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); +} + +static void ibmcam_model4_BrightnessPacket(struct uvd *uvd, int i) +{ + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0026, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, i, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0038, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); +} + +/* + * ibmcam_adjust_contrast() + * + * The contrast value changes from 0 (high contrast) to 15 (low contrast). + * This is in reverse to usual order of things (such as TV controls), so + * we reverse it again here. + * + * TODO: we probably don't need to send the setup 5 times... + * + * History: + * 1/2/00 Created. + */ +static void ibmcam_adjust_contrast(struct uvd *uvd) +{ + unsigned char a_contrast = uvd->vpic.contrast >> 12; + unsigned char new_contrast; + + if (a_contrast >= 16) + a_contrast = 15; + new_contrast = 15 - a_contrast; + if (new_contrast == uvd->vpic_old.contrast) + return; + uvd->vpic_old.contrast = new_contrast; + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + const int ntries = 5; + int i; + for (i=0; i < ntries; i++) { + ibmcam_Packet_Format1(uvd, contrast_14, new_contrast); + ibmcam_send_FF_04_02(uvd); + } + break; + } + case IBMCAM_MODEL_2: + case IBMCAM_MODEL_4: + /* Models 2, 4 do not have this control; implemented in software. */ + break; + case IBMCAM_MODEL_3: + { /* Preset hardware values */ + static const struct { + unsigned short cv1; + unsigned short cv2; + unsigned short cv3; + } cv[7] = { + { 0x05, 0x05, 0x0f }, /* Minimum */ + { 0x04, 0x04, 0x16 }, + { 0x02, 0x03, 0x16 }, + { 0x02, 0x08, 0x16 }, + { 0x01, 0x0c, 0x16 }, + { 0x01, 0x0e, 0x16 }, + { 0x01, 0x10, 0x16 } /* Maximum */ + }; + int i = a_contrast / 2; + RESTRICT_TO_RANGE(i, 0, 6); + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x0067, cv[i].cv1); + ibmcam_model3_Packet1(uvd, 0x005b, cv[i].cv2); + ibmcam_model3_Packet1(uvd, 0x005c, cv[i].cv3); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + break; + } + default: + break; + } +} + +/* + * ibmcam_change_lighting_conditions() + * + * Camera model 1: + * We have 3 levels of lighting conditions: 0=Bright, 1=Medium, 2=Low. + * + * Camera model 2: + * We have 16 levels of lighting, 0 for bright light and up to 15 for + * low light. But values above 5 or so are useless because camera is + * not really capable to produce anything worth viewing at such light. + * This setting may be altered only in certain camera state. + * + * Low lighting forces slower FPS. Lighting is set as a module parameter. + * + * History: + * 1/5/00 Created. + * 2/20/00 Added support for Model 2 cameras. + */ +static void ibmcam_change_lighting_conditions(struct uvd *uvd) +{ + static const char proc[] = "ibmcam_change_lighting_conditions"; + + if (debug > 0) + info("%s: Set lighting to %hu.", proc, lighting); + + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + const int ntries = 5; + int i; + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, light_27, (unsigned short) lighting); + break; + } + case IBMCAM_MODEL_2: +#if 0 + /* + * This command apparently requires camera to be stopped. My + * experiments showed that it -is- possible to alter the lighting + * conditions setting "on the fly", but why bother? This setting does + * not work reliably in all cases, so I decided simply to leave the + * setting where Xirlink put it - in the camera setup phase. This code + * is commented out because it does not work at -any- moment, so its + * presence makes no sense. You may use it for experiments. + */ + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop camera */ + ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Start camera */ +#endif + break; + case IBMCAM_MODEL_3: + case IBMCAM_MODEL_4: + default: + break; + } +} + +/* + * ibmcam_set_sharpness() + * + * Cameras model 1 have internal smoothing feature. It is controlled by value in + * range [0..6], where 0 is most smooth and 6 is most sharp (raw image, I guess). + * Recommended value is 4. Cameras model 2 do not have this feature at all. + */ +static void ibmcam_set_sharpness(struct uvd *uvd) +{ + static const char proc[] = "ibmcam_set_sharpness"; + + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + static const unsigned short sa[] = { 0x11, 0x13, 0x16, 0x18, 0x1a, 0x8, 0x0a }; + unsigned short i, sv; + + RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX); + if (debug > 0) + info("%s: Set sharpness to %hu.", proc, sharpness); + + sv = sa[sharpness - SHARPNESS_MIN]; + for (i=0; i < 2; i++) { + ibmcam_send_x_01_00_05 (uvd, unknown_88); + ibmcam_send_x_00_05 (uvd, sharp_13); + ibmcam_send_x_00_05_02 (uvd, sv); + } + break; + } + case IBMCAM_MODEL_2: + case IBMCAM_MODEL_4: + /* Models 2, 4 do not have this control */ + break; + case IBMCAM_MODEL_3: + { /* + * "Use a table of magic numbers. + * This setting doesn't really change much. + * But that's how Windows does it." + */ + static const struct { + unsigned short sv1; + unsigned short sv2; + unsigned short sv3; + unsigned short sv4; + } sv[7] = { + { 0x00, 0x00, 0x05, 0x14 }, /* Smoothest */ + { 0x01, 0x04, 0x05, 0x14 }, + { 0x02, 0x04, 0x05, 0x14 }, + { 0x03, 0x04, 0x05, 0x14 }, + { 0x03, 0x05, 0x05, 0x14 }, + { 0x03, 0x06, 0x05, 0x14 }, + { 0x03, 0x07, 0x05, 0x14 } /* Sharpest */ + }; + RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX); + RESTRICT_TO_RANGE(sharpness, 0, 6); + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x0060, sv[sharpness].sv1); + ibmcam_model3_Packet1(uvd, 0x0061, sv[sharpness].sv2); + ibmcam_model3_Packet1(uvd, 0x0062, sv[sharpness].sv3); + ibmcam_model3_Packet1(uvd, 0x0063, sv[sharpness].sv4); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_veio(uvd, 0, 0x0001, 0x0113); + break; + } + default: + break; + } +} + +/* + * ibmcam_set_brightness() + * + * This procedure changes brightness of the picture. + */ +static void ibmcam_set_brightness(struct uvd *uvd) +{ + static const char proc[] = "ibmcam_set_brightness"; + static const unsigned short n = 1; + + if (debug > 0) + info("%s: Set brightness to %hu.", proc, uvd->vpic.brightness); + + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + { + unsigned short i, j, bv[3]; + bv[0] = bv[1] = bv[2] = uvd->vpic.brightness >> 10; + if (bv[0] == (uvd->vpic_old.brightness >> 10)) + return; + uvd->vpic_old.brightness = bv[0]; + for (j=0; j < 3; j++) + for (i=0; i < n; i++) + ibmcam_Packet_Format1(uvd, bright_3x[j], bv[j]); + break; + } + case IBMCAM_MODEL_2: + { + unsigned short i, j; + i = uvd->vpic.brightness >> 12; /* 0 .. 15 */ + j = 0x60 + i * ((0xee - 0x60) / 16); /* 0x60 .. 0xee or so */ + if (uvd->vpic_old.brightness == j) + break; + uvd->vpic_old.brightness = j; + ibmcam_model2_Packet1(uvd, mod2_brightness, j); + break; + } + case IBMCAM_MODEL_3: + { + /* Model 3: Brightness range 'i' in [0x0C..0x3F] */ + unsigned short i = + 0x0C + (uvd->vpic.brightness / (0xFFFF / (0x3F - 0x0C + 1))); + RESTRICT_TO_RANGE(i, 0x0C, 0x3F); + if (uvd->vpic_old.brightness == i) + break; + uvd->vpic_old.brightness = i; + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x0036, i); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_veio(uvd, 0, 0x0001, 0x0113); + break; + } + case IBMCAM_MODEL_4: + { + /* Model 4: Brightness range 'i' in [0x04..0xb4] */ + unsigned short i = 0x04 + (uvd->vpic.brightness / (0xFFFF / (0xb4 - 0x04 + 1))); + RESTRICT_TO_RANGE(i, 0x04, 0xb4); + if (uvd->vpic_old.brightness == i) + break; + uvd->vpic_old.brightness = i; + ibmcam_model4_BrightnessPacket(uvd, i); + break; + } + default: + break; + } +} + +static void ibmcam_set_hue(struct uvd *uvd) +{ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_2: + { + unsigned short hue = uvd->vpic.hue >> 9; /* 0 .. 7F */ + if (uvd->vpic_old.hue == hue) + return; + uvd->vpic_old.hue = hue; + ibmcam_model2_Packet1(uvd, mod2_hue, hue); + /* ibmcam_model2_Packet1(uvd, mod2_saturation, sat); */ + break; + } + case IBMCAM_MODEL_3: + { +#if 0 /* This seems not to work. No problem, will fix programmatically */ + unsigned short hue = 0x05 + (uvd->vpic.hue / (0xFFFF / (0x37 - 0x05 + 1))); + RESTRICT_TO_RANGE(hue, 0x05, 0x37); + if (uvd->vpic_old.hue == hue) + return; + uvd->vpic_old.hue = hue; + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop */ + ibmcam_model3_Packet1(uvd, 0x007e, hue); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_veio(uvd, 0, 0x0001, 0x0113); +#endif + break; + } + case IBMCAM_MODEL_4: + { + unsigned short r_gain, g_gain, b_gain, hue; + + /* + * I am not sure r/g/b_gain variables exactly control gain + * of those channels. Most likely they subtly change some + * very internal image processing settings in the camera. + * In any case, here is what they do, and feel free to tweak: + * + * r_gain: seriously affects red gain + * g_gain: seriously affects green gain + * b_gain: seriously affects blue gain + * hue: changes average color from violet (0) to red (0xFF) + * + * These settings are preset for a decent white balance in + * 320x240, 352x288 modes. Low-res modes exhibit higher contrast + * and therefore may need different values here. + */ + hue = 20 + (uvd->vpic.hue >> 9); + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + r_gain = 90; + g_gain = 166; + b_gain = 175; + break; + case VIDEOSIZE_160x120: + r_gain = 70; + g_gain = 166; + b_gain = 185; + break; + case VIDEOSIZE_176x144: + r_gain = 160; + g_gain = 175; + b_gain = 185; + break; + default: + r_gain = 120; + g_gain = 166; + b_gain = 175; + break; + } + RESTRICT_TO_RANGE(hue, 1, 0x7f); + + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, g_gain, 0x0127); /* Green gain */ + ibmcam_veio(uvd, 0, r_gain, 0x012e); /* Red gain */ + ibmcam_veio(uvd, 0, b_gain, 0x0130); /* Blue gain */ + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, hue, 0x012d); /* Hue */ + ibmcam_veio(uvd, 0, 0xf545, 0x0124); + break; + } + default: + break; + } +} + +/* + * ibmcam_adjust_picture() + * + * This procedure gets called from V4L interface to update picture settings. + * Here we change brightness and contrast. + */ +static void ibmcam_adjust_picture(struct uvd *uvd) +{ + ibmcam_adjust_contrast(uvd); + ibmcam_set_brightness(uvd); + ibmcam_set_hue(uvd); +} + +static int ibmcam_model1_setup(struct uvd *uvd) +{ + const int ntries = 5; + int i; + + ibmcam_veio(uvd, 1, 0x00, 0x0128); + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x01, 0x0100); /* LED On */ + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x81, 0x0100); /* LED Off */ + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x01, 0x0100); /* LED On */ + ibmcam_veio(uvd, 0, 0x01, 0x0108); + + ibmcam_veio(uvd, 0, 0x03, 0x0112); + ibmcam_veio(uvd, 1, 0x00, 0x0115); + ibmcam_veio(uvd, 0, 0x06, 0x0115); + ibmcam_veio(uvd, 1, 0x00, 0x0116); + ibmcam_veio(uvd, 0, 0x44, 0x0116); + ibmcam_veio(uvd, 1, 0x00, 0x0116); + ibmcam_veio(uvd, 0, 0x40, 0x0116); + ibmcam_veio(uvd, 1, 0x00, 0x0115); + ibmcam_veio(uvd, 0, 0x0e, 0x0115); + ibmcam_veio(uvd, 0, 0x19, 0x012c); + + ibmcam_Packet_Format1(uvd, 0x00, 0x1e); + ibmcam_Packet_Format1(uvd, 0x39, 0x0d); + ibmcam_Packet_Format1(uvd, 0x39, 0x09); + ibmcam_Packet_Format1(uvd, 0x3b, 0x00); + ibmcam_Packet_Format1(uvd, 0x28, 0x22); + ibmcam_Packet_Format1(uvd, light_27, 0); + ibmcam_Packet_Format1(uvd, 0x2b, 0x1f); + ibmcam_Packet_Format1(uvd, 0x39, 0x08); + + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x2c, 0x00); + + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x30, 0x14); + + ibmcam_PacketFormat2(uvd, 0x39, 0x02); + ibmcam_PacketFormat2(uvd, 0x01, 0xe1); + ibmcam_PacketFormat2(uvd, 0x02, 0xcd); + ibmcam_PacketFormat2(uvd, 0x03, 0xcd); + ibmcam_PacketFormat2(uvd, 0x04, 0xfa); + ibmcam_PacketFormat2(uvd, 0x3f, 0xff); + ibmcam_PacketFormat2(uvd, 0x39, 0x00); + + ibmcam_PacketFormat2(uvd, 0x39, 0x02); + ibmcam_PacketFormat2(uvd, 0x0a, 0x37); + ibmcam_PacketFormat2(uvd, 0x0b, 0xb8); + ibmcam_PacketFormat2(uvd, 0x0c, 0xf3); + ibmcam_PacketFormat2(uvd, 0x0d, 0xe3); + ibmcam_PacketFormat2(uvd, 0x0e, 0x0d); + ibmcam_PacketFormat2(uvd, 0x0f, 0xf2); + ibmcam_PacketFormat2(uvd, 0x10, 0xd5); + ibmcam_PacketFormat2(uvd, 0x11, 0xba); + ibmcam_PacketFormat2(uvd, 0x12, 0x53); + ibmcam_PacketFormat2(uvd, 0x3f, 0xff); + ibmcam_PacketFormat2(uvd, 0x39, 0x00); + + ibmcam_PacketFormat2(uvd, 0x39, 0x02); + ibmcam_PacketFormat2(uvd, 0x16, 0x00); + ibmcam_PacketFormat2(uvd, 0x17, 0x28); + ibmcam_PacketFormat2(uvd, 0x18, 0x7d); + ibmcam_PacketFormat2(uvd, 0x19, 0xbe); + ibmcam_PacketFormat2(uvd, 0x3f, 0xff); + ibmcam_PacketFormat2(uvd, 0x39, 0x00); + + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x00, 0x18); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x13, 0x18); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x14, 0x06); + + /* This is default brightness */ + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x31, 0x37); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x32, 0x46); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x33, 0x55); + + ibmcam_Packet_Format1(uvd, 0x2e, 0x04); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x2d, 0x04); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x29, 0x80); + ibmcam_Packet_Format1(uvd, 0x2c, 0x01); + ibmcam_Packet_Format1(uvd, 0x30, 0x17); + ibmcam_Packet_Format1(uvd, 0x39, 0x08); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x34, 0x00); + + ibmcam_veio(uvd, 0, 0x00, 0x0101); + ibmcam_veio(uvd, 0, 0x00, 0x010a); + + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + ibmcam_veio(uvd, 0, 0x80, 0x0103); + ibmcam_veio(uvd, 0, 0x60, 0x0105); + ibmcam_veio(uvd, 0, 0x0c, 0x010b); + ibmcam_veio(uvd, 0, 0x04, 0x011b); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x0b, 0x011d); + ibmcam_veio(uvd, 0, 0x00, 0x011e); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x00, 0x0129); + break; + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0xb0, 0x0103); + ibmcam_veio(uvd, 0, 0x8f, 0x0105); + ibmcam_veio(uvd, 0, 0x06, 0x010b); + ibmcam_veio(uvd, 0, 0x04, 0x011b); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x0d, 0x011d); + ibmcam_veio(uvd, 0, 0x00, 0x011e); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x03, 0x0129); + break; + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0xb0, 0x0103); + ibmcam_veio(uvd, 0, 0x90, 0x0105); + ibmcam_veio(uvd, 0, 0x02, 0x010b); + ibmcam_veio(uvd, 0, 0x04, 0x011b); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x05, 0x011d); + ibmcam_veio(uvd, 0, 0x00, 0x011e); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x00, 0x0129); + break; + } + + ibmcam_veio(uvd, 0, 0xff, 0x012b); + + /* This is another brightness - don't know why */ + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x31, 0xc3); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x32, 0xd2); + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, 0x33, 0xe1); + + /* Default contrast */ + for (i=0; i < ntries; i++) + ibmcam_Packet_Format1(uvd, contrast_14, 0x0a); + + /* Default sharpness */ + for (i=0; i < 2; i++) + ibmcam_PacketFormat2(uvd, sharp_13, 0x1a); /* Level 4 FIXME */ + + /* Default lighting conditions */ + ibmcam_Packet_Format1(uvd, light_27, lighting); /* 0=Bright 2=Low */ + + /* Assorted init */ + + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + ibmcam_Packet_Format1(uvd, 0x2b, 0x1e); + ibmcam_veio(uvd, 0, 0xc9, 0x0119); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x80, 0x0109); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x36, 0x0102); + ibmcam_veio(uvd, 0, 0x1a, 0x0104); + ibmcam_veio(uvd, 0, 0x04, 0x011a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x2b, 0x011c); + ibmcam_veio(uvd, 0, 0x23, 0x012a); /* Same everywhere */ +#if 0 + ibmcam_veio(uvd, 0, 0x00, 0x0106); + ibmcam_veio(uvd, 0, 0x38, 0x0107); +#else + ibmcam_veio(uvd, 0, 0x02, 0x0106); + ibmcam_veio(uvd, 0, 0x2a, 0x0107); +#endif + break; + case VIDEOSIZE_176x144: + ibmcam_Packet_Format1(uvd, 0x2b, 0x1e); + ibmcam_veio(uvd, 0, 0xc9, 0x0119); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x80, 0x0109); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x04, 0x0102); + ibmcam_veio(uvd, 0, 0x02, 0x0104); + ibmcam_veio(uvd, 0, 0x04, 0x011a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x2b, 0x011c); + ibmcam_veio(uvd, 0, 0x23, 0x012a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x01, 0x0106); + ibmcam_veio(uvd, 0, 0xca, 0x0107); + break; + case VIDEOSIZE_352x288: + ibmcam_Packet_Format1(uvd, 0x2b, 0x1f); + ibmcam_veio(uvd, 0, 0xc9, 0x0119); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x80, 0x0109); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x08, 0x0102); + ibmcam_veio(uvd, 0, 0x01, 0x0104); + ibmcam_veio(uvd, 0, 0x04, 0x011a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x2f, 0x011c); + ibmcam_veio(uvd, 0, 0x23, 0x012a); /* Same everywhere */ + ibmcam_veio(uvd, 0, 0x03, 0x0106); + ibmcam_veio(uvd, 0, 0xf6, 0x0107); + break; + } + return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT); +} + +static int ibmcam_model2_setup(struct uvd *uvd) +{ + ibmcam_veio(uvd, 0, 0x0000, 0x0100); /* LED on */ + ibmcam_veio(uvd, 1, 0x0000, 0x0116); + ibmcam_veio(uvd, 0, 0x0060, 0x0116); + ibmcam_veio(uvd, 0, 0x0002, 0x0112); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0008, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0x002c, 0x0103); /* All except 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x0024, 0x0105); /* 176x144, 352x288 */ + ibmcam_veio(uvd, 0, 0x00b9, 0x010a); /* Unique to this mode */ + ibmcam_veio(uvd, 0, 0x0038, 0x0119); /* Unique to this mode */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x0090, 0x0107); /* Unique to every mode*/ + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0028, 0x0103); /* Unique to this mode */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x001e, 0x0105); /* 320x240, 352x240 */ + ibmcam_veio(uvd, 0, 0x0039, 0x010a); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0070, 0x0119); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x0098, 0x0107); /* Unique to every mode*/ + break; + case VIDEOSIZE_352x240: + ibmcam_veio(uvd, 0, 0x002c, 0x0103); /* All except 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x001e, 0x0105); /* 320x240, 352x240 */ + ibmcam_veio(uvd, 0, 0x0039, 0x010a); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0070, 0x0119); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x00da, 0x0107); /* Unique to every mode*/ + break; + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0x002c, 0x0103); /* All except 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0104); /* Same */ + ibmcam_veio(uvd, 0, 0x0024, 0x0105); /* 176x144, 352x288 */ + ibmcam_veio(uvd, 0, 0x0039, 0x010a); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0070, 0x0119); /* All except 176x144 */ + ibmcam_veio(uvd, 0, 0x0003, 0x0106); /* Same */ + ibmcam_veio(uvd, 0, 0x00fe, 0x0107); /* Unique to every mode*/ + break; + } + return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT); +} + +/* + * ibmcam_model1_setup_after_video_if() + * + * This code adds finishing touches to the video data interface. + * Here we configure the frame rate and turn on the LED. + */ +static void ibmcam_model1_setup_after_video_if(struct uvd *uvd) +{ + unsigned short internal_frame_rate; + + RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX); + internal_frame_rate = FRAMERATE_MAX - framerate; /* 0=Fast 6=Slow */ + ibmcam_veio(uvd, 0, 0x01, 0x0100); /* LED On */ + ibmcam_veio(uvd, 0, internal_frame_rate, 0x0111); + ibmcam_veio(uvd, 0, 0x01, 0x0114); + ibmcam_veio(uvd, 0, 0xc0, 0x010c); +} + +static void ibmcam_model2_setup_after_video_if(struct uvd *uvd) +{ + unsigned short setup_model2_rg2, setup_model2_sat, setup_model2_yb; + + ibmcam_veio(uvd, 0, 0x0000, 0x0100); /* LED on */ + + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0x0050, 0x0111); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + break; + case VIDEOSIZE_320x240: + case VIDEOSIZE_352x240: + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0x0040, 0x0111); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + break; + } + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + + /* + * Hardware settings, may affect CMOS sensor; not user controls! + * ------------------------------------------------------------- + * 0x0004: no effect + * 0x0006: hardware effect + * 0x0008: no effect + * 0x000a: stops video stream, probably important h/w setting + * 0x000c: changes color in hardware manner (not user setting) + * 0x0012: changes number of colors (does not affect speed) + * 0x002a: no effect + * 0x002c: hardware setting (related to scan lines) + * 0x002e: stops video stream, probably important h/w setting + */ + ibmcam_model2_Packet1(uvd, 0x000a, 0x005c); + ibmcam_model2_Packet1(uvd, 0x0004, 0x0000); + ibmcam_model2_Packet1(uvd, 0x0006, 0x00fb); + ibmcam_model2_Packet1(uvd, 0x0008, 0x0000); + ibmcam_model2_Packet1(uvd, 0x000c, 0x0009); + ibmcam_model2_Packet1(uvd, 0x0012, 0x000a); + ibmcam_model2_Packet1(uvd, 0x002a, 0x0000); + ibmcam_model2_Packet1(uvd, 0x002c, 0x0000); + ibmcam_model2_Packet1(uvd, 0x002e, 0x0008); + + /* + * Function 0x0030 pops up all over the place. Apparently + * it is a hardware control register, with every bit assigned to + * do something. + */ + ibmcam_model2_Packet1(uvd, 0x0030, 0x0000); + + /* + * Magic control of CMOS sensor. Only lower values like + * 0-3 work, and picture shifts left or right. Don't change. + */ + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_model2_Packet1(uvd, 0x0014, 0x0002); + ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */ + break; + case VIDEOSIZE_320x240: + ibmcam_model2_Packet1(uvd, 0x0014, 0x0009); + ibmcam_model2_Packet1(uvd, 0x0016, 0x0005); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Another hardware setting */ + break; + case VIDEOSIZE_352x240: + /* This mode doesn't work as Windows programs it; changed to work */ + ibmcam_model2_Packet1(uvd, 0x0014, 0x0009); /* Windows sets this to 8 */ + ibmcam_model2_Packet1(uvd, 0x0016, 0x0003); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Windows sets this to 0x0045 */ + break; + case VIDEOSIZE_352x288: + ibmcam_model2_Packet1(uvd, 0x0014, 0x0003); + ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */ + ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */ + break; + } + + ibmcam_model2_Packet1(uvd, mod2_brightness, 0x005a); + + /* + * We have our own frame rate setting varying from 0 (slowest) to 6 (fastest). + * The camera model 2 allows frame rate in range [0..0x1F] where 0 is also the + * slowest setting. However for all practical reasons high settings make no + * sense because USB is not fast enough to support high FPS. Be aware that + * the picture datastream will be severely disrupted if you ask for + * frame rate faster than allowed for the video size - see below: + * + * Allowable ranges (obtained experimentally on OHCI, K6-3, 450 MHz): + * ----------------------------------------------------------------- + * 176x144: [6..31] + * 320x240: [8..31] + * 352x240: [10..31] + * 352x288: [16..31] I have to raise lower threshold for stability... + * + * As usual, slower FPS provides better sensitivity. + */ + { + short hw_fps=31, i_framerate; + + RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX); + i_framerate = FRAMERATE_MAX - framerate + FRAMERATE_MIN; + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + hw_fps = 6 + i_framerate*4; + break; + case VIDEOSIZE_320x240: + hw_fps = 8 + i_framerate*3; + break; + case VIDEOSIZE_352x240: + hw_fps = 10 + i_framerate*2; + break; + case VIDEOSIZE_352x288: + hw_fps = 28 + i_framerate/2; + break; + } + if (uvd->debug > 0) + info("Framerate (hardware): %hd.", hw_fps); + RESTRICT_TO_RANGE(hw_fps, 0, 31); + ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps); + } + + /* + * This setting does not visibly affect pictures; left it here + * because it was present in Windows USB data stream. This function + * does not allow arbitrary values and apparently is a bit mask, to + * be activated only at appropriate time. Don't change it randomly! + */ + switch (uvd->videosize) { + case VIDEOSIZE_176x144: + ibmcam_model2_Packet1(uvd, 0x0026, 0x00c2); + break; + case VIDEOSIZE_320x240: + ibmcam_model2_Packet1(uvd, 0x0026, 0x0044); + break; + case VIDEOSIZE_352x240: + ibmcam_model2_Packet1(uvd, 0x0026, 0x0046); + break; + case VIDEOSIZE_352x288: + ibmcam_model2_Packet1(uvd, 0x0026, 0x0048); + break; + } + + ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting); + + if (init_model2_rg2 >= 0) { + RESTRICT_TO_RANGE(init_model2_rg2, 0, 255); + setup_model2_rg2 = init_model2_rg2; + } else + setup_model2_rg2 = 0x002f; + + if (init_model2_sat >= 0) { + RESTRICT_TO_RANGE(init_model2_sat, 0, 255); + setup_model2_sat = init_model2_sat; + } else + setup_model2_sat = 0x0034; + + if (init_model2_yb >= 0) { + RESTRICT_TO_RANGE(init_model2_yb, 0, 255); + setup_model2_yb = init_model2_yb; + } else + setup_model2_yb = 0x00a0; + + ibmcam_model2_Packet1(uvd, mod2_color_balance_rg2, setup_model2_rg2); + ibmcam_model2_Packet1(uvd, mod2_saturation, setup_model2_sat); + ibmcam_model2_Packet1(uvd, mod2_color_balance_yb, setup_model2_yb); + ibmcam_model2_Packet1(uvd, mod2_hue, uvd->vpic.hue >> 9); /* 0 .. 7F */; + + /* Hardware control command */ + ibmcam_model2_Packet1(uvd, 0x0030, 0x0004); + + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); /* Go camera, go! */ + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); +} + +static void ibmcam_model4_setup_after_video_if(struct uvd *uvd) +{ + switch (uvd->videosize) { + case VIDEOSIZE_128x96: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0070, 0x0119); + ibmcam_veio(uvd, 0, 0x00d2, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x005e, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x0039, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x0028, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x001e, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x000a, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005a, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0043, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00eb, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x0031, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x012d); + ibmcam_veio(uvd, 0, 0x0078, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_160x120: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0038, 0x0119); + ibmcam_veio(uvd, 0, 0x00d8, 0x0107); + ibmcam_veio(uvd, 0, 0x0002, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x00b9, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x0028, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x001e, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x000b, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005a, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0043, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00c7, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0025, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0048, 0x0127); + ibmcam_veio(uvd, 0, 0x0035, 0x012e); + ibmcam_veio(uvd, 0, 0x00d0, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0048, 0x012d); + ibmcam_veio(uvd, 0, 0x0090, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_176x144: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0038, 0x0119); + ibmcam_veio(uvd, 0, 0x00d6, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x0018, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x00b9, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x002c, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x0024, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0007, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0001, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005e, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0049, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00c7, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0028, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x002a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x012d); + ibmcam_veio(uvd, 0, 0x006d, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0001, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0070, 0x0119); + ibmcam_veio(uvd, 0, 0x00d2, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x005e, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00d0, 0x0111); + ibmcam_veio(uvd, 0, 0x0039, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x0028, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x001e, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x000a, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005a, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0043, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00eb, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x0031, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0017, 0x012d); + ibmcam_veio(uvd, 0, 0x0078, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + case VIDEOSIZE_352x288: + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x00bc, 0x012c); + ibmcam_veio(uvd, 0, 0x0080, 0x012b); + ibmcam_veio(uvd, 0, 0x0000, 0x0108); + ibmcam_veio(uvd, 0, 0x0001, 0x0133); + ibmcam_veio(uvd, 0, 0x009b, 0x010f); + ibmcam_veio(uvd, 0, 0x00bb, 0x010f); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x000a, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x005c, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0004, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00fb, 0x012e); + ibmcam_veio(uvd, 0, 0x0000, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x000c, 0x0127); + ibmcam_veio(uvd, 0, 0x0009, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0012, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0008, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x002a, 0x012d); + ibmcam_veio(uvd, 0, 0x0000, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0034, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x0070, 0x0119); + ibmcam_veio(uvd, 0, 0x00f2, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x008c, 0x0107); + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x00c0, 0x0111); + ibmcam_veio(uvd, 0, 0x0039, 0x010a); + ibmcam_veio(uvd, 0, 0x0001, 0x0102); + ibmcam_veio(uvd, 0, 0x002c, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0104); + ibmcam_veio(uvd, 0, 0x0024, 0x0105); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0016, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0006, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0014, 0x012d); + ibmcam_veio(uvd, 0, 0x0002, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012e); + ibmcam_veio(uvd, 0, 0x001a, 0x0130); + ibmcam_veio(uvd, 0, 0x8a0a, 0x0124); + ibmcam_veio(uvd, 0, 0x005e, 0x012d); + ibmcam_veio(uvd, 0, 0x9545, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x0127); + ibmcam_veio(uvd, 0, 0x0018, 0x012e); + ibmcam_veio(uvd, 0, 0x0049, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012f); + ibmcam_veio(uvd, 0, 0xd055, 0x0124); + ibmcam_veio(uvd, 0, 0x001c, 0x0127); + ibmcam_veio(uvd, 0, 0x00cf, 0x012e); + ibmcam_veio(uvd, 0, 0xaa28, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0032, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0x00aa, 0x0130); + ibmcam_veio(uvd, 0, 0x82a8, 0x0124); + ibmcam_veio(uvd, 0, 0x0036, 0x012d); + ibmcam_veio(uvd, 0, 0x0008, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0xfffa, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x001e, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x0127); + ibmcam_veio(uvd, 0, 0x0013, 0x012e); + ibmcam_veio(uvd, 0, 0x0025, 0x0130); + ibmcam_veio(uvd, 0, 0x8a28, 0x0124); + ibmcam_veio(uvd, 0, 0x0010, 0x012d); + ibmcam_veio(uvd, 0, 0x0048, 0x012f); + ibmcam_veio(uvd, 0, 0xd145, 0x0124); + ibmcam_veio(uvd, 0, 0x0000, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00aa, 0x012d); + ibmcam_veio(uvd, 0, 0x0038, 0x012f); + ibmcam_veio(uvd, 0, 0xd141, 0x0124); + ibmcam_veio(uvd, 0, 0x0004, 0x0127); + ibmcam_veio(uvd, 0, 0xfea8, 0x0124); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + break; + } + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); +} + +static void ibmcam_model3_setup_after_video_if(struct uvd *uvd) +{ + int i; + /* + * 01.01.08 - Added for RCA video in support -LO + * This struct is used to init the Model3 cam to use the RCA video in port + * instead of the CCD sensor. + */ + static const struct struct_initData initData[] = { + {0, 0x0000, 0x010c}, + {0, 0x0006, 0x012c}, + {0, 0x0078, 0x012d}, + {0, 0x0046, 0x012f}, + {0, 0xd141, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfea8, 0x0124}, + {1, 0x0000, 0x0116}, + {0, 0x0064, 0x0116}, + {1, 0x0000, 0x0115}, + {0, 0x0003, 0x0115}, + {0, 0x0008, 0x0123}, + {0, 0x0000, 0x0117}, + {0, 0x0000, 0x0112}, + {0, 0x0080, 0x0100}, + {0, 0x0000, 0x0100}, + {1, 0x0000, 0x0116}, + {0, 0x0060, 0x0116}, + {0, 0x0002, 0x0112}, + {0, 0x0000, 0x0123}, + {0, 0x0001, 0x0117}, + {0, 0x0040, 0x0108}, + {0, 0x0019, 0x012c}, + {0, 0x0040, 0x0116}, + {0, 0x000a, 0x0115}, + {0, 0x000b, 0x0115}, + {0, 0x0078, 0x012d}, + {0, 0x0046, 0x012f}, + {0, 0xd141, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfea8, 0x0124}, + {0, 0x0064, 0x0116}, + {0, 0x0000, 0x0115}, + {0, 0x0001, 0x0115}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00aa, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f2, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x000f, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f8, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00fc, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f9, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x003c, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xffff, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0027, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0019, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0021, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0006, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0045, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002a, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x000e, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002b, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00f4, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002c, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0004, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002d, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0014, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002e, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0003, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x002f, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0003, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0014, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0053, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0x0000, 0x0101}, + {0, 0x00a0, 0x0103}, + {0, 0x0078, 0x0105}, + {0, 0x0000, 0x010a}, + {0, 0x0024, 0x010b}, + {0, 0x0028, 0x0119}, + {0, 0x0088, 0x011b}, + {0, 0x0002, 0x011d}, + {0, 0x0003, 0x011e}, + {0, 0x0000, 0x0129}, + {0, 0x00fc, 0x012b}, + {0, 0x0008, 0x0102}, + {0, 0x0000, 0x0104}, + {0, 0x0008, 0x011a}, + {0, 0x0028, 0x011c}, + {0, 0x0021, 0x012a}, + {0, 0x0000, 0x0118}, + {0, 0x0000, 0x0132}, + {0, 0x0000, 0x0109}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0031, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x00dc, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0032, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0020, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0001, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0040, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0037, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0030, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0xfff9, 0x0124}, + {0, 0x0086, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0038, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0008, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0x0000, 0x0127}, + {0, 0xfff8, 0x0124}, + {0, 0xfffd, 0x0124}, + {0, 0xfffa, 0x0124}, + {0, 0x0003, 0x0106}, + {0, 0x0062, 0x0107}, + {0, 0x0003, 0x0111}, + }; +#define NUM_INIT_DATA + + unsigned short compression = 0; /* 0=none, 7=best frame rate */ + int f_rate; /* 0=Fastest 7=slowest */ + + if (IBMCAM_T(uvd)->initialized) + return; + + /* Internal frame rate is controlled by f_rate value */ + f_rate = 7 - framerate; + RESTRICT_TO_RANGE(f_rate, 0, 7); + + ibmcam_veio(uvd, 0, 0x0000, 0x0100); + ibmcam_veio(uvd, 1, 0x0000, 0x0116); + ibmcam_veio(uvd, 0, 0x0060, 0x0116); + ibmcam_veio(uvd, 0, 0x0002, 0x0112); + ibmcam_veio(uvd, 0, 0x0000, 0x0123); + ibmcam_veio(uvd, 0, 0x0001, 0x0117); + ibmcam_veio(uvd, 0, 0x0040, 0x0108); + ibmcam_veio(uvd, 0, 0x0019, 0x012c); + ibmcam_veio(uvd, 0, 0x0060, 0x0116); + ibmcam_veio(uvd, 0, 0x0002, 0x0115); + ibmcam_veio(uvd, 0, 0x0003, 0x0115); + ibmcam_veio(uvd, 1, 0x0000, 0x0115); + ibmcam_veio(uvd, 0, 0x000b, 0x0115); + ibmcam_model3_Packet1(uvd, 0x000a, 0x0040); + ibmcam_model3_Packet1(uvd, 0x000b, 0x00f6); + ibmcam_model3_Packet1(uvd, 0x000c, 0x0002); + ibmcam_model3_Packet1(uvd, 0x000d, 0x0020); + ibmcam_model3_Packet1(uvd, 0x000e, 0x0033); + ibmcam_model3_Packet1(uvd, 0x000f, 0x0007); + ibmcam_model3_Packet1(uvd, 0x0010, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0011, 0x0070); + ibmcam_model3_Packet1(uvd, 0x0012, 0x0030); + ibmcam_model3_Packet1(uvd, 0x0013, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0014, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0015, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0016, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0017, 0x0001); + ibmcam_model3_Packet1(uvd, 0x0018, 0x0000); + ibmcam_model3_Packet1(uvd, 0x001e, 0x00c3); + ibmcam_model3_Packet1(uvd, 0x0020, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0028, 0x0010); + ibmcam_model3_Packet1(uvd, 0x0029, 0x0054); + ibmcam_model3_Packet1(uvd, 0x002a, 0x0013); + ibmcam_model3_Packet1(uvd, 0x002b, 0x0007); + ibmcam_model3_Packet1(uvd, 0x002d, 0x0028); + ibmcam_model3_Packet1(uvd, 0x002e, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0031, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0032, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0033, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0034, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0035, 0x0038); + ibmcam_model3_Packet1(uvd, 0x003a, 0x0001); + ibmcam_model3_Packet1(uvd, 0x003c, 0x001e); + ibmcam_model3_Packet1(uvd, 0x003f, 0x000a); + ibmcam_model3_Packet1(uvd, 0x0041, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0046, 0x003f); + ibmcam_model3_Packet1(uvd, 0x0047, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0050, 0x0005); + ibmcam_model3_Packet1(uvd, 0x0052, 0x001a); + ibmcam_model3_Packet1(uvd, 0x0053, 0x0003); + ibmcam_model3_Packet1(uvd, 0x005a, 0x006b); + ibmcam_model3_Packet1(uvd, 0x005d, 0x001e); + ibmcam_model3_Packet1(uvd, 0x005e, 0x0030); + ibmcam_model3_Packet1(uvd, 0x005f, 0x0041); + ibmcam_model3_Packet1(uvd, 0x0064, 0x0008); + ibmcam_model3_Packet1(uvd, 0x0065, 0x0015); + ibmcam_model3_Packet1(uvd, 0x0068, 0x000f); + ibmcam_model3_Packet1(uvd, 0x0079, 0x0000); + ibmcam_model3_Packet1(uvd, 0x007a, 0x0000); + ibmcam_model3_Packet1(uvd, 0x007c, 0x003f); + ibmcam_model3_Packet1(uvd, 0x0082, 0x000f); + ibmcam_model3_Packet1(uvd, 0x0085, 0x0000); + ibmcam_model3_Packet1(uvd, 0x0099, 0x0000); + ibmcam_model3_Packet1(uvd, 0x009b, 0x0023); + ibmcam_model3_Packet1(uvd, 0x009c, 0x0022); + ibmcam_model3_Packet1(uvd, 0x009d, 0x0096); + ibmcam_model3_Packet1(uvd, 0x009e, 0x0096); + ibmcam_model3_Packet1(uvd, 0x009f, 0x000a); + + switch (uvd->videosize) { + case VIDEOSIZE_160x120: + ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */ + ibmcam_veio(uvd, 0, 0x0024, 0x010b); /* Differs everywhere */ + ibmcam_veio(uvd, 0, 0x00a9, 0x0119); + ibmcam_veio(uvd, 0, 0x0016, 0x011b); + ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */ + ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */ + ibmcam_veio(uvd, 0, 0x0018, 0x0102); + ibmcam_veio(uvd, 0, 0x0004, 0x0104); + ibmcam_veio(uvd, 0, 0x0004, 0x011a); + ibmcam_veio(uvd, 0, 0x0028, 0x011c); + ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */ + ibmcam_veio(uvd, 0, 0x0000, 0x0118); + ibmcam_veio(uvd, 0, 0x0000, 0x0132); + ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */ + ibmcam_veio(uvd, 0, compression, 0x0109); + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */ + ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */ + ibmcam_veio(uvd, 0, 0x0028, 0x010b); /* Differs everywhere */ + ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same */ + ibmcam_veio(uvd, 0, 0x0000, 0x011e); + ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */ + ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */ + /* 4 commands from 160x120 skipped */ + ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */ + ibmcam_veio(uvd, 0, compression, 0x0109); + ibmcam_veio(uvd, 0, 0x00d9, 0x0119); + ibmcam_veio(uvd, 0, 0x0006, 0x011b); + ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0010, 0x0104); + ibmcam_veio(uvd, 0, 0x0004, 0x011a); + ibmcam_veio(uvd, 0, 0x003f, 0x011c); + ibmcam_veio(uvd, 0, 0x001c, 0x0118); + ibmcam_veio(uvd, 0, 0x0000, 0x0132); + break; + case VIDEOSIZE_640x480: + ibmcam_veio(uvd, 0, 0x00f0, 0x0105); + ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */ + ibmcam_veio(uvd, 0, 0x0038, 0x010b); /* Differs everywhere */ + ibmcam_veio(uvd, 0, 0x00d9, 0x0119); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0006, 0x011b); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0004, 0x011d); /* NC */ + ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */ + ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */ + ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */ + ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0016, 0x0104); /* NC */ + ibmcam_veio(uvd, 0, 0x0004, 0x011a); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x003f, 0x011c); /* Same on 320x240, 640x480 */ + ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */ + ibmcam_veio(uvd, 0, 0x001c, 0x0118); /* Same on 320x240, 640x480 */ + ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */ + ibmcam_veio(uvd, 0, compression, 0x0109); + ibmcam_veio(uvd, 0, 0x0040, 0x0101); + ibmcam_veio(uvd, 0, 0x0040, 0x0103); + ibmcam_veio(uvd, 0, 0x0000, 0x0132); /* Same on 320x240, 640x480 */ + break; + } + ibmcam_model3_Packet1(uvd, 0x007e, 0x000e); /* Hue */ + ibmcam_model3_Packet1(uvd, 0x0036, 0x0011); /* Brightness */ + ibmcam_model3_Packet1(uvd, 0x0060, 0x0002); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0061, 0x0004); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0062, 0x0005); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0063, 0x0014); /* Sharpness */ + ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0); /* Red gain */ + ibmcam_model3_Packet1(uvd, 0x0097, 0x0096); /* Blue gain */ + ibmcam_model3_Packet1(uvd, 0x0067, 0x0001); /* Contrast */ + ibmcam_model3_Packet1(uvd, 0x005b, 0x000c); /* Contrast */ + ibmcam_model3_Packet1(uvd, 0x005c, 0x0016); /* Contrast */ + ibmcam_model3_Packet1(uvd, 0x0098, 0x000b); + ibmcam_model3_Packet1(uvd, 0x002c, 0x0003); /* Was 1, broke 640x480 */ + ibmcam_model3_Packet1(uvd, 0x002f, 0x002a); + ibmcam_model3_Packet1(uvd, 0x0030, 0x0029); + ibmcam_model3_Packet1(uvd, 0x0037, 0x0002); + ibmcam_model3_Packet1(uvd, 0x0038, 0x0059); + ibmcam_model3_Packet1(uvd, 0x003d, 0x002e); + ibmcam_model3_Packet1(uvd, 0x003e, 0x0028); + ibmcam_model3_Packet1(uvd, 0x0078, 0x0005); + ibmcam_model3_Packet1(uvd, 0x007b, 0x0011); + ibmcam_model3_Packet1(uvd, 0x007d, 0x004b); + ibmcam_model3_Packet1(uvd, 0x007f, 0x0022); + ibmcam_model3_Packet1(uvd, 0x0080, 0x000c); + ibmcam_model3_Packet1(uvd, 0x0081, 0x000b); + ibmcam_model3_Packet1(uvd, 0x0083, 0x00fd); + ibmcam_model3_Packet1(uvd, 0x0086, 0x000b); + ibmcam_model3_Packet1(uvd, 0x0087, 0x000b); + ibmcam_model3_Packet1(uvd, 0x007e, 0x000e); + ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0); /* Red gain */ + ibmcam_model3_Packet1(uvd, 0x0097, 0x0096); /* Blue gain */ + ibmcam_model3_Packet1(uvd, 0x0098, 0x000b); + + switch (uvd->videosize) { + case VIDEOSIZE_160x120: + ibmcam_veio(uvd, 0, 0x0002, 0x0106); + ibmcam_veio(uvd, 0, 0x0008, 0x0107); + ibmcam_veio(uvd, 0, f_rate, 0x0111); /* Frame rate */ + ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */ + ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0040, 0x000a); + ibmcam_model3_Packet1(uvd, 0x0051, 0x000a); + break; + case VIDEOSIZE_320x240: + ibmcam_veio(uvd, 0, 0x0003, 0x0106); + ibmcam_veio(uvd, 0, 0x0062, 0x0107); + ibmcam_veio(uvd, 0, f_rate, 0x0111); /* Frame rate */ + ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */ + ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */ + ibmcam_model3_Packet1(uvd, 0x0040, 0x0008); + ibmcam_model3_Packet1(uvd, 0x0051, 0x000b); + break; + case VIDEOSIZE_640x480: + ibmcam_veio(uvd, 0, 0x0002, 0x0106); /* Adjustments */ + ibmcam_veio(uvd, 0, 0x00b4, 0x0107); /* Adjustments */ + ibmcam_veio(uvd, 0, f_rate, 0x0111); /* Frame rate */ + ibmcam_model3_Packet1(uvd, 0x001f, 0x0002); /* !Same */ + ibmcam_model3_Packet1(uvd, 0x0039, 0x003e); /* !Same */ + ibmcam_model3_Packet1(uvd, 0x0040, 0x0008); + ibmcam_model3_Packet1(uvd, 0x0051, 0x000a); + break; + } + + /* 01.01.08 - Added for RCA video in support -LO */ + if(init_model3_input) { + if (debug > 0) + info("Setting input to RCA."); + for (i=0; i < ARRAY_SIZE(initData); i++) { + ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index); + } + } + + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); +} + +/* + * ibmcam_video_stop() + * + * This code tells camera to stop streaming. The interface remains + * configured and bandwidth - claimed. + */ +static void ibmcam_video_stop(struct uvd *uvd) +{ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + ibmcam_veio(uvd, 0, 0x00, 0x010c); + ibmcam_veio(uvd, 0, 0x00, 0x010c); + ibmcam_veio(uvd, 0, 0x01, 0x0114); + ibmcam_veio(uvd, 0, 0xc0, 0x010c); + ibmcam_veio(uvd, 0, 0x00, 0x010c); + ibmcam_send_FF_04_02(uvd); + ibmcam_veio(uvd, 1, 0x00, 0x0100); + ibmcam_veio(uvd, 0, 0x81, 0x0100); /* LED Off */ + break; + case IBMCAM_MODEL_2: +case IBMCAM_MODEL_4: + ibmcam_veio(uvd, 0, 0x0000, 0x010c); /* Stop the camera */ + + ibmcam_model2_Packet1(uvd, 0x0030, 0x0004); + + ibmcam_veio(uvd, 0, 0x0080, 0x0100); /* LED Off */ + ibmcam_veio(uvd, 0, 0x0020, 0x0111); + ibmcam_veio(uvd, 0, 0x00a0, 0x0111); + + ibmcam_model2_Packet1(uvd, 0x0030, 0x0002); + + ibmcam_veio(uvd, 0, 0x0020, 0x0111); + ibmcam_veio(uvd, 0, 0x0000, 0x0112); + break; + case IBMCAM_MODEL_3: +#if 1 + ibmcam_veio(uvd, 0, 0x0000, 0x010c); + + /* Here we are supposed to select video interface alt. setting 0 */ + ibmcam_veio(uvd, 0, 0x0006, 0x012c); + + ibmcam_model3_Packet1(uvd, 0x0046, 0x0000); + + ibmcam_veio(uvd, 1, 0x0000, 0x0116); + ibmcam_veio(uvd, 0, 0x0064, 0x0116); + ibmcam_veio(uvd, 1, 0x0000, 0x0115); + ibmcam_veio(uvd, 0, 0x0003, 0x0115); + ibmcam_veio(uvd, 0, 0x0008, 0x0123); + ibmcam_veio(uvd, 0, 0x0000, 0x0117); + ibmcam_veio(uvd, 0, 0x0000, 0x0112); + ibmcam_veio(uvd, 0, 0x0080, 0x0100); + IBMCAM_T(uvd)->initialized = 0; +#endif + break; + } /* switch */ +} + +/* + * ibmcam_reinit_iso() + * + * This procedure sends couple of commands to the camera and then + * resets the video pipe. This sequence was observed to reinit the + * camera or, at least, to initiate ISO data stream. + * + * History: + * 1/2/00 Created. + */ +static void ibmcam_reinit_iso(struct uvd *uvd, int do_stop) +{ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + if (do_stop) + ibmcam_video_stop(uvd); + ibmcam_veio(uvd, 0, 0x0001, 0x0114); + ibmcam_veio(uvd, 0, 0x00c0, 0x010c); + usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp)); + ibmcam_model1_setup_after_video_if(uvd); + break; + case IBMCAM_MODEL_2: + ibmcam_model2_setup_after_video_if(uvd); + break; + case IBMCAM_MODEL_3: + ibmcam_video_stop(uvd); + ibmcam_model3_setup_after_video_if(uvd); + break; + case IBMCAM_MODEL_4: + ibmcam_model4_setup_after_video_if(uvd); + break; + } +} + +static void ibmcam_video_start(struct uvd *uvd) +{ + ibmcam_change_lighting_conditions(uvd); + ibmcam_set_sharpness(uvd); + ibmcam_reinit_iso(uvd, 0); +} + +/* + * Return negative code on failure, 0 on success. + */ +static int ibmcam_setup_on_open(struct uvd *uvd) +{ + int setup_ok = 0; /* Success by default */ + /* Send init sequence only once, it's large! */ + if (!IBMCAM_T(uvd)->initialized) { /* FIXME rename */ + switch (IBMCAM_T(uvd)->camera_model) { + case IBMCAM_MODEL_1: + setup_ok = ibmcam_model1_setup(uvd); + break; + case IBMCAM_MODEL_2: + setup_ok = ibmcam_model2_setup(uvd); + break; + case IBMCAM_MODEL_3: + case IBMCAM_MODEL_4: + /* We do all setup when Isoc stream is requested */ + break; + } + IBMCAM_T(uvd)->initialized = (setup_ok != 0); + } + return setup_ok; +} + +static void ibmcam_configure_video(struct uvd *uvd) +{ + if (uvd == NULL) + return; + + RESTRICT_TO_RANGE(init_brightness, 0, 255); + RESTRICT_TO_RANGE(init_contrast, 0, 255); + RESTRICT_TO_RANGE(init_color, 0, 255); + RESTRICT_TO_RANGE(init_hue, 0, 255); + RESTRICT_TO_RANGE(hue_correction, 0, 255); + + memset(&uvd->vpic, 0, sizeof(uvd->vpic)); + memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); + + uvd->vpic.colour = init_color << 8; + uvd->vpic.hue = init_hue << 8; + uvd->vpic.brightness = init_brightness << 8; + uvd->vpic.contrast = init_contrast << 8; + uvd->vpic.whiteness = 105 << 8; /* This one isn't used */ + uvd->vpic.depth = 24; + uvd->vpic.palette = VIDEO_PALETTE_RGB24; + + memset(&uvd->vcap, 0, sizeof(uvd->vcap)); + strcpy(uvd->vcap.name, "IBM USB Camera"); + uvd->vcap.type = VID_TYPE_CAPTURE; + uvd->vcap.channels = 1; + uvd->vcap.audios = 0; + uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas); + uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas); + uvd->vcap.minwidth = min_canvasWidth; + uvd->vcap.minheight = min_canvasHeight; + + memset(&uvd->vchan, 0, sizeof(uvd->vchan)); + uvd->vchan.flags = 0; + uvd->vchan.tuners = 0; + uvd->vchan.channel = 0; + uvd->vchan.type = VIDEO_TYPE_CAMERA; + strcpy(uvd->vchan.name, "Camera"); +} + +/* + * ibmcam_probe() + * + * This procedure queries device descriptor and accepts the interface + * if it looks like IBM C-it camera. + * + * History: + * 22-Jan-2000 Moved camera init code to ibmcam_open() + * 27=Jan-2000 Changed to use static structures, added locking. + * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT). + * 03-Jul-2000 Fixed endianness bug. + * 12-Nov-2000 Reworked to comply with new probe() signature. + * 23-Jan-2001 Added compatibility with 2.2.x kernels. + */ +static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *devid) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct uvd *uvd = NULL; + int ix, i, nas, model=0, canvasX=0, canvasY=0; + int actInterface=-1, inactInterface=-1, maxPS=0; + __u8 ifnum = intf->altsetting->desc.bInterfaceNumber; + unsigned char video_ep = 0; + + if (debug >= 1) + info("ibmcam_probe(%p,%u.)", intf, ifnum); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + /* Check the version/revision */ + switch (le16_to_cpu(dev->descriptor.bcdDevice)) { + case 0x0002: + if (ifnum != 2) + return -ENODEV; + model = IBMCAM_MODEL_1; + break; + case 0x030A: + if (ifnum != 0) + return -ENODEV; + if ((le16_to_cpu(dev->descriptor.idProduct) == NETCAM_PRODUCT_ID) || + (le16_to_cpu(dev->descriptor.idProduct) == VEO_800D_PRODUCT_ID)) + model = IBMCAM_MODEL_4; + else + model = IBMCAM_MODEL_2; + break; + case 0x0301: + if (ifnum != 0) + return -ENODEV; + model = IBMCAM_MODEL_3; + break; + default: + err("IBM camera with revision 0x%04x is not supported.", + le16_to_cpu(dev->descriptor.bcdDevice)); + return -ENODEV; + } + + /* Print detailed info on what we found so far */ + do { + char *brand = NULL; + switch (le16_to_cpu(dev->descriptor.idProduct)) { + case NETCAM_PRODUCT_ID: + brand = "IBM NetCamera"; + break; + case VEO_800C_PRODUCT_ID: + brand = "Veo Stingray [800C]"; + break; + case VEO_800D_PRODUCT_ID: + brand = "Veo Stingray [800D]"; + break; + case IBMCAM_PRODUCT_ID: + default: + brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */ + break; + } + info("%s USB camera found (model %d, rev. 0x%04x)", + brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); + } while (0); + + /* Validate found interface: must have one ISO endpoint */ + nas = intf->num_altsetting; + if (debug > 0) + info("Number of alternate settings=%d.", nas); + if (nas < 2) { + err("Too few alternate settings for this camera!"); + return -ENODEV; + } + /* Validate all alternate settings */ + for (ix=0; ix < nas; ix++) { + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + + interface = &intf->altsetting[ix]; + i = interface->desc.bAlternateSetting; + if (interface->desc.bNumEndpoints != 1) { + err("Interface %d. has %u. endpoints!", + ifnum, (unsigned)(interface->desc.bNumEndpoints)); + return -ENODEV; + } + endpoint = &interface->endpoint[0].desc; + if (video_ep == 0) + video_ep = endpoint->bEndpointAddress; + else if (video_ep != endpoint->bEndpointAddress) { + err("Alternate settings have different endpoint addresses!"); + return -ENODEV; + } + if ((endpoint->bmAttributes & 0x03) != 0x01) { + err("Interface %d. has non-ISO endpoint!", ifnum); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & 0x80) == 0) { + err("Interface %d. has ISO OUT endpoint!", ifnum); + return -ENODEV; + } + if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) { + if (inactInterface < 0) + inactInterface = i; + else { + err("More than one inactive alt. setting!"); + return -ENODEV; + } + } else { + if (actInterface < 0) { + actInterface = i; + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + if (debug > 0) + info("Active setting=%d. maxPS=%d.", i, maxPS); + } else + err("More than one active alt. setting! Ignoring #%d.", i); + } + } + if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) { + err("Failed to recognize the camera!"); + return -ENODEV; + } + + /* Validate options */ + switch (model) { + case IBMCAM_MODEL_1: + RESTRICT_TO_RANGE(lighting, 0, 2); + RESTRICT_TO_RANGE(size, SIZE_128x96, SIZE_352x288); + if (framerate < 0) + framerate = 2; + canvasX = 352; + canvasY = 288; + break; + case IBMCAM_MODEL_2: + RESTRICT_TO_RANGE(lighting, 0, 15); + RESTRICT_TO_RANGE(size, SIZE_176x144, SIZE_352x240); + if (framerate < 0) + framerate = 2; + canvasX = 352; + canvasY = 240; + break; + case IBMCAM_MODEL_3: + RESTRICT_TO_RANGE(lighting, 0, 15); /* FIXME */ + switch (size) { + case SIZE_160x120: + canvasX = 160; + canvasY = 120; + if (framerate < 0) + framerate = 2; + RESTRICT_TO_RANGE(framerate, 0, 5); + break; + default: + info("IBM camera: using 320x240"); + size = SIZE_320x240; + /* No break here */ + case SIZE_320x240: + canvasX = 320; + canvasY = 240; + if (framerate < 0) + framerate = 3; + RESTRICT_TO_RANGE(framerate, 0, 5); + break; + case SIZE_640x480: + canvasX = 640; + canvasY = 480; + framerate = 0; /* Slowest, and maybe even that is too fast */ + break; + } + break; + case IBMCAM_MODEL_4: + RESTRICT_TO_RANGE(lighting, 0, 2); + switch (size) { + case SIZE_128x96: + canvasX = 128; + canvasY = 96; + break; + case SIZE_160x120: + canvasX = 160; + canvasY = 120; + break; + default: + info("IBM NetCamera: using 176x144"); + size = SIZE_176x144; + /* No break here */ + case SIZE_176x144: + canvasX = 176; + canvasY = 144; + break; + case SIZE_320x240: + canvasX = 320; + canvasY = 240; + break; + case SIZE_352x288: + canvasX = 352; + canvasY = 288; + break; + } + break; + default: + err("IBM camera: Model %d. not supported!", model); + return -ENODEV; + } + + uvd = usbvideo_AllocateDevice(cams); + if (uvd != NULL) { + /* Here uvd is a fully allocated uvd object */ + uvd->flags = flags; + uvd->debug = debug; + uvd->dev = dev; + uvd->iface = ifnum; + uvd->ifaceAltInactive = inactInterface; + uvd->ifaceAltActive = actInterface; + uvd->video_endp = video_ep; + uvd->iso_packet_len = maxPS; + uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24; + uvd->defaultPalette = VIDEO_PALETTE_RGB24; + uvd->canvas = VIDEOSIZE(canvasX, canvasY); + uvd->videosize = ibmcam_size_to_videosize(size); + + /* Initialize ibmcam-specific data */ + assert(IBMCAM_T(uvd) != NULL); + IBMCAM_T(uvd)->camera_model = model; + IBMCAM_T(uvd)->initialized = 0; + + ibmcam_configure_video(uvd); + + i = usbvideo_RegisterVideoDevice(uvd); + if (i != 0) { + err("usbvideo_RegisterVideoDevice() failed."); + uvd = NULL; + } + } + usb_set_intfdata (intf, uvd); + return 0; +} + + +static struct usb_device_id id_table[] = { + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) }, /* Model 1 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) }, /* Model 3 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */ + { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */ + { } /* Terminating entry */ +}; + +/* + * ibmcam_init() + * + * This code is run to initialize the driver. + * + * History: + * 1/27/00 Reworked to use statically allocated ibmcam structures. + * 21/10/00 Completely redesigned to use usbvideo services. + */ +static int __init ibmcam_init(void) +{ + struct usbvideo_cb cbTbl; + memset(&cbTbl, 0, sizeof(cbTbl)); + cbTbl.probe = ibmcam_probe; + cbTbl.setupOnOpen = ibmcam_setup_on_open; + cbTbl.videoStart = ibmcam_video_start; + cbTbl.videoStop = ibmcam_video_stop; + cbTbl.processData = ibmcam_ProcessIsocData; + cbTbl.postProcess = usbvideo_DeinterlaceFrame; + cbTbl.adjustPicture = ibmcam_adjust_picture; + cbTbl.getFPS = ibmcam_calculate_fps; + return usbvideo_register( + &cams, + MAX_IBMCAM, + sizeof(ibmcam_t), + "ibmcam", + &cbTbl, + THIS_MODULE, + id_table); +} + +static void __exit ibmcam_cleanup(void) +{ + usbvideo_Deregister(&cams); +} + +MODULE_DEVICE_TABLE(usb, id_table); + +module_init(ibmcam_init); +module_exit(ibmcam_cleanup); diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c new file mode 100644 index 000000000000..c11f5d46b114 --- /dev/null +++ b/drivers/media/video/usbvideo/konicawc.c @@ -0,0 +1,978 @@ +/* + * konicawc.c - konica webcam driver + * + * Author: Simon Evans <spse@secret.org.uk> + * + * Copyright (C) 2002 Simon Evans + * + * Licence: GPL + * + * Driver for USB webcams based on Konica chipset. This + * chipset is used in Intel YC76 camera. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/usb_input.h> + +#include "usbvideo.h" + +#define MAX_BRIGHTNESS 108 +#define MAX_CONTRAST 108 +#define MAX_SATURATION 108 +#define MAX_SHARPNESS 108 +#define MAX_WHITEBAL 372 +#define MAX_SPEED 6 + + +#define MAX_CAMERAS 1 + +#define DRIVER_VERSION "v1.4" +#define DRIVER_DESC "Konica Webcam driver" + +enum ctrl_req { + SetWhitebal = 0x01, + SetBrightness = 0x02, + SetSharpness = 0x03, + SetContrast = 0x04, + SetSaturation = 0x05, +}; + + +enum frame_sizes { + SIZE_160X120 = 0, + SIZE_160X136 = 1, + SIZE_176X144 = 2, + SIZE_320X240 = 3, + +}; + +#define MAX_FRAME_SIZE SIZE_320X240 + +static struct usbvideo *cams; + +#ifdef CONFIG_USB_DEBUG +static int debug; +#define DEBUG(n, format, arg...) \ + if (n <= debug) { \ + printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __FUNCTION__ , ## arg); \ + } +#else +#define DEBUG(n, arg...) +static const int debug = 0; +#endif + + +/* Some default values for initial camera settings, + can be set by modprobe */ + +static int size; +static int speed = 6; /* Speed (fps) 0 (slowest) to 6 (fastest) */ +static int brightness = MAX_BRIGHTNESS/2; +static int contrast = MAX_CONTRAST/2; +static int saturation = MAX_SATURATION/2; +static int sharpness = MAX_SHARPNESS/2; +static int whitebal = 3*(MAX_WHITEBAL/4); + +static const int spd_to_iface[] = { 1, 0, 3, 2, 4, 5, 6 }; + +/* These FPS speeds are from the windows config box. They are + * indexed on size (0-2) and speed (0-6). Divide by 3 to get the + * real fps. + */ + +static const int spd_to_fps[][7] = { { 24, 40, 48, 60, 72, 80, 100 }, + { 24, 40, 48, 60, 72, 80, 100 }, + { 18, 30, 36, 45, 54, 60, 75 }, + { 6, 10, 12, 15, 18, 21, 25 } }; + +struct cam_size { + u16 width; + u16 height; + u8 cmd; +}; + +static const struct cam_size camera_sizes[] = { { 160, 120, 0x7 }, + { 160, 136, 0xa }, + { 176, 144, 0x4 }, + { 320, 240, 0x5 } }; + +struct konicawc { + u8 brightness; /* camera uses 0 - 9, x11 for real value */ + u8 contrast; /* as above */ + u8 saturation; /* as above */ + u8 sharpness; /* as above */ + u8 white_bal; /* 0 - 33, x11 for real value */ + u8 speed; /* Stored as 0 - 6, used as index in spd_to_* (above) */ + u8 size; /* Frame Size */ + int height; + int width; + struct urb *sts_urb[USBVIDEO_NUMSBUF]; + u8 sts_buf[USBVIDEO_NUMSBUF][FRAMES_PER_DESC]; + struct urb *last_data_urb; + int lastframe; + int cur_frame_size; /* number of bytes in current frame size */ + int maxline; /* number of lines per frame */ + int yplanesz; /* Number of bytes in the Y plane */ + unsigned int buttonsts:1; +#ifdef CONFIG_INPUT + struct input_dev *input; + char input_physname[64]; +#endif +}; + + +#define konicawc_set_misc(uvd, req, value, index) konicawc_ctrl_msg(uvd, USB_DIR_OUT, req, value, index, NULL, 0) +#define konicawc_get_misc(uvd, req, value, index, buf, sz) konicawc_ctrl_msg(uvd, USB_DIR_IN, req, value, index, buf, sz) +#define konicawc_set_value(uvd, value, index) konicawc_ctrl_msg(uvd, USB_DIR_OUT, 2, value, index, NULL, 0) + + +static int konicawc_ctrl_msg(struct uvd *uvd, u8 dir, u8 request, u16 value, u16 index, void *buf, int len) +{ + int retval = usb_control_msg(uvd->dev, + dir ? usb_rcvctrlpipe(uvd->dev, 0) : usb_sndctrlpipe(uvd->dev, 0), + request, 0x40 | dir, value, index, buf, len, 1000); + return retval < 0 ? retval : 0; +} + + +static inline void konicawc_camera_on(struct uvd *uvd) +{ + DEBUG(0, "camera on"); + konicawc_set_misc(uvd, 0x2, 1, 0x0b); +} + + +static inline void konicawc_camera_off(struct uvd *uvd) +{ + DEBUG(0, "camera off"); + konicawc_set_misc(uvd, 0x2, 0, 0x0b); +} + + +static void konicawc_set_camera_size(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + konicawc_set_misc(uvd, 0x2, camera_sizes[cam->size].cmd, 0x08); + cam->width = camera_sizes[cam->size].width; + cam->height = camera_sizes[cam->size].height; + cam->yplanesz = cam->height * cam->width; + cam->cur_frame_size = (cam->yplanesz * 3) / 2; + cam->maxline = cam->yplanesz / 256; + uvd->videosize = VIDEOSIZE(cam->width, cam->height); +} + + +static int konicawc_setup_on_open(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + DEBUG(1, "setting brightness to %d (%d)", cam->brightness, + cam->brightness * 11); + konicawc_set_value(uvd, cam->brightness, SetBrightness); + DEBUG(1, "setting white balance to %d (%d)", cam->white_bal, + cam->white_bal * 11); + konicawc_set_value(uvd, cam->white_bal, SetWhitebal); + DEBUG(1, "setting contrast to %d (%d)", cam->contrast, + cam->contrast * 11); + konicawc_set_value(uvd, cam->contrast, SetContrast); + DEBUG(1, "setting saturation to %d (%d)", cam->saturation, + cam->saturation * 11); + konicawc_set_value(uvd, cam->saturation, SetSaturation); + DEBUG(1, "setting sharpness to %d (%d)", cam->sharpness, + cam->sharpness * 11); + konicawc_set_value(uvd, cam->sharpness, SetSharpness); + konicawc_set_camera_size(uvd); + cam->lastframe = -2; + cam->buttonsts = 0; + return 0; +} + + +static void konicawc_adjust_picture(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + konicawc_camera_off(uvd); + DEBUG(1, "new brightness: %d", uvd->vpic.brightness); + uvd->vpic.brightness = (uvd->vpic.brightness > MAX_BRIGHTNESS) ? MAX_BRIGHTNESS : uvd->vpic.brightness; + if(cam->brightness != uvd->vpic.brightness / 11) { + cam->brightness = uvd->vpic.brightness / 11; + DEBUG(1, "setting brightness to %d (%d)", cam->brightness, + cam->brightness * 11); + konicawc_set_value(uvd, cam->brightness, SetBrightness); + } + + DEBUG(1, "new contrast: %d", uvd->vpic.contrast); + uvd->vpic.contrast = (uvd->vpic.contrast > MAX_CONTRAST) ? MAX_CONTRAST : uvd->vpic.contrast; + if(cam->contrast != uvd->vpic.contrast / 11) { + cam->contrast = uvd->vpic.contrast / 11; + DEBUG(1, "setting contrast to %d (%d)", cam->contrast, + cam->contrast * 11); + konicawc_set_value(uvd, cam->contrast, SetContrast); + } + konicawc_camera_on(uvd); +} + +#ifdef CONFIG_INPUT + +static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) +{ + struct input_dev *input_dev; + + usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); + strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); + + cam->input = input_dev = input_allocate_device(); + if (!input_dev) { + warn("Not enough memory for camera's input device\n"); + return; + } + + input_dev->name = "Konicawc snapshot button"; + input_dev->phys = cam->input_physname; + usb_to_input_id(dev, &input_dev->id); + input_dev->cdev.dev = &dev->dev; + + input_dev->evbit[0] = BIT(EV_KEY); + input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0); + + input_dev->private = cam; + + input_register_device(cam->input); +} + +static void konicawc_unregister_input(struct konicawc *cam) +{ + if (cam->input) { + input_unregister_device(cam->input); + cam->input = NULL; + } +} + +static void konicawc_report_buttonstat(struct konicawc *cam) +{ + if (cam->input) { + input_report_key(cam->input, BTN_0, cam->buttonsts); + input_sync(cam->input); + } +} + +#else + +static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { } +static inline void konicawc_unregister_input(struct konicawc *cam) { } +static inline void konicawc_report_buttonstat(struct konicawc *cam) { } + +#endif /* CONFIG_INPUT */ + +static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb) +{ + char *cdata; + int i, totlen = 0; + unsigned char *status = stsurb->transfer_buffer; + int keep = 0, discard = 0, bad = 0; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + for (i = 0; i < dataurb->number_of_packets; i++) { + int button = cam->buttonsts; + unsigned char sts; + int n = dataurb->iso_frame_desc[i].actual_length; + int st = dataurb->iso_frame_desc[i].status; + cdata = dataurb->transfer_buffer + + dataurb->iso_frame_desc[i].offset; + + /* Detect and ignore errored packets */ + if (st < 0) { + DEBUG(1, "Data error: packet=%d. len=%d. status=%d.", + i, n, st); + uvd->stats.iso_err_count++; + continue; + } + + /* Detect and ignore empty packets */ + if (n <= 0) { + uvd->stats.iso_skip_count++; + continue; + } + + /* See what the status data said about the packet */ + sts = *(status+stsurb->iso_frame_desc[i].offset); + + /* sts: 0x80-0xff: frame start with frame number (ie 0-7f) + * otherwise: + * bit 0 0: keep packet + * 1: drop packet (padding data) + * + * bit 4 0 button not clicked + * 1 button clicked + * button is used to `take a picture' (in software) + */ + + if(sts < 0x80) { + button = !!(sts & 0x40); + sts &= ~0x40; + } + + /* work out the button status, but don't do + anything with it for now */ + + if(button != cam->buttonsts) { + DEBUG(2, "button: %sclicked", button ? "" : "un"); + cam->buttonsts = button; + konicawc_report_buttonstat(cam); + } + + if(sts == 0x01) { /* drop frame */ + discard++; + continue; + } + + if((sts > 0x01) && (sts < 0x80)) { + info("unknown status %2.2x", sts); + bad++; + continue; + } + if(!sts && cam->lastframe == -2) { + DEBUG(2, "dropping frame looking for image start"); + continue; + } + + keep++; + if(sts & 0x80) { /* frame start */ + unsigned char marker[] = { 0, 0xff, 0, 0x00 }; + + if(cam->lastframe == -2) { + DEBUG(2, "found initial image"); + cam->lastframe = -1; + } + + marker[3] = sts & 0x7F; + RingQueue_Enqueue(&uvd->dp, marker, 4); + totlen += 4; + } + + totlen += n; /* Little local accounting */ + RingQueue_Enqueue(&uvd->dp, cdata, n); + } + DEBUG(8, "finished: keep = %d discard = %d bad = %d added %d bytes", + keep, discard, bad, totlen); + return totlen; +} + + +static void resubmit_urb(struct uvd *uvd, struct urb *urb) +{ + int i, ret; + for (i = 0; i < FRAMES_PER_DESC; i++) { + urb->iso_frame_desc[i].status = 0; + } + urb->dev = uvd->dev; + urb->status = 0; + ret = usb_submit_urb(urb, GFP_ATOMIC); + DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length); + if(ret) + err("usb_submit_urb error (%d)", ret); + +} + + +static void konicawc_isoc_irq(struct urb *urb, struct pt_regs *regs) +{ + struct uvd *uvd = urb->context; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + /* We don't want to do anything if we are about to be removed! */ + if (!CAMERA_IS_OPERATIONAL(uvd)) + return; + + if (!uvd->streaming) { + DEBUG(1, "Not streaming, but interrupt!"); + return; + } + + DEBUG(3, "got frame %d len = %d buflen =%d", urb->start_frame, urb->actual_length, urb->transfer_buffer_length); + + uvd->stats.urb_count++; + + if (urb->transfer_buffer_length > 32) { + cam->last_data_urb = urb; + return; + } + /* Copy the data received into ring queue */ + if(cam->last_data_urb) { + int len = 0; + if(urb->start_frame != cam->last_data_urb->start_frame) + err("Lost sync on frames"); + else if (!urb->status && !cam->last_data_urb->status) + len = konicawc_compress_iso(uvd, cam->last_data_urb, urb); + + resubmit_urb(uvd, cam->last_data_urb); + resubmit_urb(uvd, urb); + cam->last_data_urb = NULL; + uvd->stats.urb_length = len; + uvd->stats.data_count += len; + if(len) + RingQueue_WakeUpInterruptible(&uvd->dp); + return; + } + return; +} + + +static int konicawc_start_data(struct uvd *uvd) +{ + struct usb_device *dev = uvd->dev; + int i, errFlag; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + int pktsz; + struct usb_interface *intf; + struct usb_host_interface *interface = NULL; + + intf = usb_ifnum_to_if(dev, uvd->iface); + if (intf) + interface = usb_altnum_to_altsetting(intf, + spd_to_iface[cam->speed]); + if (!interface) + return -ENXIO; + pktsz = le16_to_cpu(interface->endpoint[1].desc.wMaxPacketSize); + DEBUG(1, "pktsz = %d", pktsz); + if (!CAMERA_IS_OPERATIONAL(uvd)) { + err("Camera is not operational"); + return -EFAULT; + } + uvd->curframe = -1; + konicawc_camera_on(uvd); + /* Alternate interface 1 is is the biggest frame size */ + i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive); + if (i < 0) { + err("usb_set_interface error"); + uvd->last_error = i; + return -EBUSY; + } + + /* We double buffer the Iso lists */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + int j, k; + struct urb *urb = uvd->sbuf[i].urb; + urb->dev = dev; + urb->context = uvd; + urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp); + urb->interval = 1; + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = uvd->sbuf[i].data; + urb->complete = konicawc_isoc_irq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC; + for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = pktsz; + } + + urb = cam->sts_urb[i]; + urb->dev = dev; + urb->context = uvd; + urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp-1); + urb->interval = 1; + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = cam->sts_buf[i]; + urb->complete = konicawc_isoc_irq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = FRAMES_PER_DESC; + for (j=0; j < FRAMES_PER_DESC; j++) { + urb->iso_frame_desc[j].offset = j; + urb->iso_frame_desc[j].length = 1; + } + } + + cam->last_data_urb = NULL; + + /* Submit all URBs */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + errFlag = usb_submit_urb(cam->sts_urb[i], GFP_KERNEL); + if (errFlag) + err("usb_submit_isoc(%d) ret %d", i, errFlag); + + errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL); + if (errFlag) + err ("usb_submit_isoc(%d) ret %d", i, errFlag); + } + + uvd->streaming = 1; + DEBUG(1, "streaming=1 video_endp=$%02x", uvd->video_endp); + return 0; +} + + +static void konicawc_stop_data(struct uvd *uvd) +{ + int i, j; + struct konicawc *cam; + + if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL)) + return; + + konicawc_camera_off(uvd); + uvd->streaming = 0; + cam = (struct konicawc *)uvd->user_data; + cam->last_data_urb = NULL; + + /* Unschedule all of the iso td's */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + usb_kill_urb(uvd->sbuf[i].urb); + usb_kill_urb(cam->sts_urb[i]); + } + + if (!uvd->remove_pending) { + /* Set packet size to 0 */ + j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive); + if (j < 0) { + err("usb_set_interface() error %d.", j); + uvd->last_error = j; + } + } +} + + +static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + int maxline = cam->maxline; + int yplanesz = cam->yplanesz; + + assert(frame != NULL); + + DEBUG(5, "maxline = %d yplanesz = %d", maxline, yplanesz); + DEBUG(3, "Frame state = %d", frame->scanstate); + + if(frame->scanstate == ScanState_Scanning) { + int drop = 0; + int curframe; + int fdrops = 0; + DEBUG(3, "Searching for marker, queue len = %d", RingQueue_GetLength(&uvd->dp)); + while(RingQueue_GetLength(&uvd->dp) >= 4) { + if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) && + (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) && + (RING_QUEUE_PEEK(&uvd->dp, 3) < 0x80)) { + curframe = RING_QUEUE_PEEK(&uvd->dp, 3); + if(cam->lastframe >= 0) { + fdrops = (0x80 + curframe - cam->lastframe) & 0x7F; + fdrops--; + if(fdrops) { + info("Dropped %d frames (%d -> %d)", fdrops, + cam->lastframe, curframe); + } + } + cam->lastframe = curframe; + frame->curline = 0; + frame->scanstate = ScanState_Lines; + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4); + break; + } + RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1); + drop++; + } + if(drop) + DEBUG(2, "dropped %d bytes looking for new frame", drop); + } + + if(frame->scanstate == ScanState_Scanning) + return; + + /* Try to move data from queue into frame buffer + * We get data in blocks of 384 bytes made up of: + * 256 Y, 64 U, 64 V. + * This needs to be written out as a Y plane, a U plane and a V plane. + */ + + while ( frame->curline < maxline && (RingQueue_GetLength(&uvd->dp) >= 384)) { + /* Y */ + RingQueue_Dequeue(&uvd->dp, frame->data + (frame->curline * 256), 256); + /* U */ + RingQueue_Dequeue(&uvd->dp, frame->data + yplanesz + (frame->curline * 64), 64); + /* V */ + RingQueue_Dequeue(&uvd->dp, frame->data + (5 * yplanesz)/4 + (frame->curline * 64), 64); + frame->seqRead_Length += 384; + frame->curline++; + } + /* See if we filled the frame */ + if (frame->curline == maxline) { + DEBUG(5, "got whole frame"); + + frame->frameState = FrameState_Done_Hold; + frame->curline = 0; + uvd->curframe = -1; + uvd->stats.frame_num++; + } +} + + +static int konicawc_find_fps(int size, int fps) +{ + int i; + + fps *= 3; + DEBUG(1, "konica_find_fps: size = %d fps = %d", size, fps); + if(fps <= spd_to_fps[size][0]) + return 0; + + if(fps >= spd_to_fps[size][MAX_SPEED]) + return MAX_SPEED; + + for(i = 0; i < MAX_SPEED; i++) { + if((fps >= spd_to_fps[size][i]) && (fps <= spd_to_fps[size][i+1])) { + DEBUG(2, "fps %d between %d and %d", fps, i, i+1); + if( (fps - spd_to_fps[size][i]) < (spd_to_fps[size][i+1] - fps)) + return i; + else + return i+1; + } + } + return MAX_SPEED+1; +} + + +static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + int newspeed = cam->speed; + int newsize; + int x = vw->width; + int y = vw->height; + int fps = vw->flags; + + if(x > 0 && y > 0) { + DEBUG(2, "trying to find size %d,%d", x, y); + for(newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) { + if((camera_sizes[newsize].width == x) && (camera_sizes[newsize].height == y)) + break; + } + } else { + newsize = cam->size; + } + + if(newsize > MAX_FRAME_SIZE) { + DEBUG(1, "couldn't find size %d,%d", x, y); + return -EINVAL; + } + + if(fps > 0) { + DEBUG(1, "trying to set fps to %d", fps); + newspeed = konicawc_find_fps(newsize, fps); + DEBUG(1, "find_fps returned %d (%d)", newspeed, spd_to_fps[newsize][newspeed]); + } + + if(newspeed > MAX_SPEED) + return -EINVAL; + + DEBUG(1, "setting size to %d speed to %d", newsize, newspeed); + if((newsize == cam->size) && (newspeed == cam->speed)) { + DEBUG(1, "Nothing to do"); + return 0; + } + DEBUG(0, "setting to %dx%d @ %d fps", camera_sizes[newsize].width, + camera_sizes[newsize].height, spd_to_fps[newsize][newspeed]/3); + + konicawc_stop_data(uvd); + uvd->ifaceAltActive = spd_to_iface[newspeed]; + DEBUG(1, "new interface = %d", uvd->ifaceAltActive); + cam->speed = newspeed; + + if(cam->size != newsize) { + cam->size = newsize; + konicawc_set_camera_size(uvd); + } + + /* Flush the input queue and clear any current frame in progress */ + + RingQueue_Flush(&uvd->dp); + cam->lastframe = -2; + if(uvd->curframe != -1) { + uvd->frame[uvd->curframe].curline = 0; + uvd->frame[uvd->curframe].seqRead_Length = 0; + uvd->frame[uvd->curframe].seqRead_Index = 0; + } + + konicawc_start_data(uvd); + return 0; +} + + +static int konicawc_calculate_fps(struct uvd *uvd) +{ + struct konicawc *cam = uvd->user_data; + return spd_to_fps[cam->size][cam->speed]/3; +} + + +static void konicawc_configure_video(struct uvd *uvd) +{ + struct konicawc *cam = (struct konicawc *)uvd->user_data; + u8 buf[2]; + + memset(&uvd->vpic, 0, sizeof(uvd->vpic)); + memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); + + RESTRICT_TO_RANGE(brightness, 0, MAX_BRIGHTNESS); + RESTRICT_TO_RANGE(contrast, 0, MAX_CONTRAST); + RESTRICT_TO_RANGE(saturation, 0, MAX_SATURATION); + RESTRICT_TO_RANGE(sharpness, 0, MAX_SHARPNESS); + RESTRICT_TO_RANGE(whitebal, 0, MAX_WHITEBAL); + + cam->brightness = brightness / 11; + cam->contrast = contrast / 11; + cam->saturation = saturation / 11; + cam->sharpness = sharpness / 11; + cam->white_bal = whitebal / 11; + + uvd->vpic.colour = 108; + uvd->vpic.hue = 108; + uvd->vpic.brightness = brightness; + uvd->vpic.contrast = contrast; + uvd->vpic.whiteness = whitebal; + uvd->vpic.depth = 6; + uvd->vpic.palette = VIDEO_PALETTE_YUV420P; + + memset(&uvd->vcap, 0, sizeof(uvd->vcap)); + strcpy(uvd->vcap.name, "Konica Webcam"); + uvd->vcap.type = VID_TYPE_CAPTURE; + uvd->vcap.channels = 1; + uvd->vcap.audios = 0; + uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width; + uvd->vcap.minheight = camera_sizes[SIZE_160X120].height; + uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width; + uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height; + + memset(&uvd->vchan, 0, sizeof(uvd->vchan)); + uvd->vchan.flags = 0 ; + uvd->vchan.tuners = 0; + uvd->vchan.channel = 0; + uvd->vchan.type = VIDEO_TYPE_CAMERA; + strcpy(uvd->vchan.name, "Camera"); + + /* Talk to device */ + DEBUG(1, "device init"); + if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2)) + DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]); + if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2)) + DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]); + if(konicawc_set_misc(uvd, 0x2, 0, 0xd)) + DEBUG(2, "2,0,d failed"); + DEBUG(1, "setting initial values"); +} + +static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct uvd *uvd = NULL; + int ix, i, nas; + int actInterface=-1, inactInterface=-1, maxPS=0; + unsigned char video_ep = 0; + + DEBUG(1, "konicawc_probe(%p)", intf); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + info("Konica Webcam (rev. 0x%04x)", le16_to_cpu(dev->descriptor.bcdDevice)); + RESTRICT_TO_RANGE(speed, 0, MAX_SPEED); + + /* Validate found interface: must have one ISO endpoint */ + nas = intf->num_altsetting; + if (nas != 8) { + err("Incorrect number of alternate settings (%d) for this camera!", nas); + return -ENODEV; + } + /* Validate all alternate settings */ + for (ix=0; ix < nas; ix++) { + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + + interface = &intf->altsetting[ix]; + i = interface->desc.bAlternateSetting; + if (interface->desc.bNumEndpoints != 2) { + err("Interface %d. has %u. endpoints!", + interface->desc.bInterfaceNumber, + (unsigned)(interface->desc.bNumEndpoints)); + return -ENODEV; + } + endpoint = &interface->endpoint[1].desc; + DEBUG(1, "found endpoint: addr: 0x%2.2x maxps = 0x%4.4x", + endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize)); + if (video_ep == 0) + video_ep = endpoint->bEndpointAddress; + else if (video_ep != endpoint->bEndpointAddress) { + err("Alternate settings have different endpoint addresses!"); + return -ENODEV; + } + if ((endpoint->bmAttributes & 0x03) != 0x01) { + err("Interface %d. has non-ISO endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & 0x80) == 0) { + err("Interface %d. has ISO OUT endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) { + if (inactInterface < 0) + inactInterface = i; + else { + err("More than one inactive alt. setting!"); + return -ENODEV; + } + } else { + if (i == spd_to_iface[speed]) { + /* This one is the requested one */ + actInterface = i; + } + } + if (le16_to_cpu(endpoint->wMaxPacketSize) > maxPS) + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + } + if(actInterface == -1) { + err("Cant find required endpoint"); + return -ENODEV; + } + + DEBUG(1, "Selecting requested active setting=%d. maxPS=%d.", actInterface, maxPS); + + uvd = usbvideo_AllocateDevice(cams); + if (uvd != NULL) { + struct konicawc *cam = (struct konicawc *)(uvd->user_data); + /* Here uvd is a fully allocated uvd object */ + for(i = 0; i < USBVIDEO_NUMSBUF; i++) { + cam->sts_urb[i] = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); + if(cam->sts_urb[i] == NULL) { + while(i--) { + usb_free_urb(cam->sts_urb[i]); + } + err("can't allocate urbs"); + return -ENOMEM; + } + } + cam->speed = speed; + RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240); + cam->width = camera_sizes[size].width; + cam->height = camera_sizes[size].height; + cam->size = size; + + uvd->flags = 0; + uvd->debug = debug; + uvd->dev = dev; + uvd->iface = intf->altsetting->desc.bInterfaceNumber; + uvd->ifaceAltInactive = inactInterface; + uvd->ifaceAltActive = actInterface; + uvd->video_endp = video_ep; + uvd->iso_packet_len = maxPS; + uvd->paletteBits = 1L << VIDEO_PALETTE_YUV420P; + uvd->defaultPalette = VIDEO_PALETTE_YUV420P; + uvd->canvas = VIDEOSIZE(320, 240); + uvd->videosize = VIDEOSIZE(cam->width, cam->height); + + /* Initialize konicawc specific data */ + konicawc_configure_video(uvd); + + i = usbvideo_RegisterVideoDevice(uvd); + uvd->max_frame_size = (320 * 240 * 3)/2; + if (i != 0) { + err("usbvideo_RegisterVideoDevice() failed."); + uvd = NULL; + } + + konicawc_register_input(cam, dev); + } + + if (uvd) { + usb_set_intfdata (intf, uvd); + return 0; + } + return -EIO; +} + + +static void konicawc_free_uvd(struct uvd *uvd) +{ + int i; + struct konicawc *cam = (struct konicawc *)uvd->user_data; + + konicawc_unregister_input(cam); + + for (i = 0; i < USBVIDEO_NUMSBUF; i++) { + usb_free_urb(cam->sts_urb[i]); + cam->sts_urb[i] = NULL; + } +} + + +static struct usb_device_id id_table[] = { + { USB_DEVICE(0x04c8, 0x0720) }, /* Intel YC 76 */ + { } /* Terminating entry */ +}; + + +static int __init konicawc_init(void) +{ + struct usbvideo_cb cbTbl; + info(DRIVER_DESC " " DRIVER_VERSION); + memset(&cbTbl, 0, sizeof(cbTbl)); + cbTbl.probe = konicawc_probe; + cbTbl.setupOnOpen = konicawc_setup_on_open; + cbTbl.processData = konicawc_process_isoc; + cbTbl.getFPS = konicawc_calculate_fps; + cbTbl.setVideoMode = konicawc_set_video_mode; + cbTbl.startDataPump = konicawc_start_data; + cbTbl.stopDataPump = konicawc_stop_data; + cbTbl.adjustPicture = konicawc_adjust_picture; + cbTbl.userFree = konicawc_free_uvd; + return usbvideo_register( + &cams, + MAX_CAMERAS, + sizeof(struct konicawc), + "konicawc", + &cbTbl, + THIS_MODULE, + id_table); +} + + +static void __exit konicawc_cleanup(void) +{ + usbvideo_Deregister(&cams); +} + + +MODULE_DEVICE_TABLE(usb, id_table); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>"); +MODULE_DESCRIPTION(DRIVER_DESC); +module_param(speed, int, 0); +MODULE_PARM_DESC(speed, "Initial speed: 0 (slowest) - 6 (fastest)"); +module_param(size, int, 0); +MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 160x136 2: 176x144 3: 320x240"); +module_param(brightness, int, 0); +MODULE_PARM_DESC(brightness, "Initial brightness 0 - 108"); +module_param(contrast, int, 0); +MODULE_PARM_DESC(contrast, "Initial contrast 0 - 108"); +module_param(saturation, int, 0); +MODULE_PARM_DESC(saturation, "Initial saturation 0 - 108"); +module_param(sharpness, int, 0); +MODULE_PARM_DESC(sharpness, "Initial brightness 0 - 108"); +module_param(whitebal, int, 0); +MODULE_PARM_DESC(whitebal, "Initial white balance 0 - 363"); + +#ifdef CONFIG_USB_DEBUG +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); +#endif + +module_init(konicawc_init); +module_exit(konicawc_cleanup); diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c new file mode 100644 index 000000000000..10c58b4a2e5b --- /dev/null +++ b/drivers/media/video/usbvideo/ultracam.c @@ -0,0 +1,679 @@ +/* + * USB NB Camera driver + * + * HISTORY: + * 25-Dec-2002 Dmitri Removed lighting, sharpness parameters, methods. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/init.h> + +#include "usbvideo.h" + +#define ULTRACAM_VENDOR_ID 0x0461 +#define ULTRACAM_PRODUCT_ID 0x0813 + +#define MAX_CAMERAS 4 /* How many devices we allow to connect */ + +/* + * This structure lives in uvd_t->user field. + */ +typedef struct { + int initialized; /* Had we already sent init sequence? */ + int camera_model; /* What type of IBM camera we got? */ + int has_hdr; +} ultracam_t; +#define ULTRACAM_T(uvd) ((ultracam_t *)((uvd)->user_data)) + +static struct usbvideo *cams = NULL; + +static int debug = 0; + +static int flags = 0; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */ + +static const int min_canvasWidth = 8; +static const int min_canvasHeight = 4; + +#define FRAMERATE_MIN 0 +#define FRAMERATE_MAX 6 +static int framerate = -1; + +/* + * Here we define several initialization variables. They may + * be used to automatically set color, hue, brightness and + * contrast to desired values. This is particularly useful in + * case of webcams (which have no controls and no on-screen + * output) and also when a client V4L software is used that + * does not have some of those controls. In any case it's + * good to have startup values as options. + * + * These values are all in [0..255] range. This simplifies + * operation. Note that actual values of V4L variables may + * be scaled up (as much as << 8). User can see that only + * on overlay output, however, or through a V4L client. + */ +static int init_brightness = 128; +static int init_contrast = 192; +static int init_color = 128; +static int init_hue = 128; +static int hue_correction = 128; + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)"); +module_param(flags, int, 0); +MODULE_PARM_DESC(flags, + "Bitfield: 0=VIDIOCSYNC, " + "1=B/W, " + "2=show hints, " + "3=show stats, " + "4=test pattern, " + "5=separate frames, " + "6=clean frames"); +module_param(framerate, int, 0); +MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)"); + +module_param(init_brightness, int, 0); +MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)"); +module_param(init_contrast, int, 0); +MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)"); +module_param(init_color, int, 0); +MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)"); +module_param(init_hue, int, 0); +MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)"); +module_param(hue_correction, int, 0); +MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)"); + +/* + * ultracam_ProcessIsocData() + * + * Generic routine to parse the ring queue data. It employs either + * ultracam_find_header() or ultracam_parse_lines() to do most + * of work. + * + * 02-Nov-2000 First (mostly dummy) version. + * 06-Nov-2000 Rewrote to dump all data into frame. + */ +static void ultracam_ProcessIsocData(struct uvd *uvd, struct usbvideo_frame *frame) +{ + int n; + + assert(uvd != NULL); + assert(frame != NULL); + + /* Try to move data from queue into frame buffer */ + n = RingQueue_GetLength(&uvd->dp); + if (n > 0) { + int m; + /* See how much spare we have left */ + m = uvd->max_frame_size - frame->seqRead_Length; + if (n > m) + n = m; + /* Now move that much data into frame buffer */ + RingQueue_Dequeue( + &uvd->dp, + frame->data + frame->seqRead_Length, + m); + frame->seqRead_Length += m; + } + /* See if we filled the frame */ + if (frame->seqRead_Length >= uvd->max_frame_size) { + frame->frameState = FrameState_Done; + uvd->curframe = -1; + uvd->stats.frame_num++; + } +} + +/* + * ultracam_veio() + * + * History: + * 1/27/00 Added check for dev == NULL; this happens if camera is unplugged. + */ +static int ultracam_veio( + struct uvd *uvd, + unsigned char req, + unsigned short value, + unsigned short index, + int is_out) +{ + static const char proc[] = "ultracam_veio"; + unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */; + int i; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return 0; + + if (!is_out) { + i = usb_control_msg( + uvd->dev, + usb_rcvctrlpipe(uvd->dev, 0), + req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + cp, + sizeof(cp), + 1000); +#if 1 + info("USB => %02x%02x%02x%02x%02x%02x%02x%02x " + "(req=$%02x val=$%04x ind=$%04x)", + cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7], + req, value, index); +#endif + } else { + i = usb_control_msg( + uvd->dev, + usb_sndctrlpipe(uvd->dev, 0), + req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + NULL, + 0, + 1000); + } + if (i < 0) { + err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.", + proc, i); + uvd->last_error = i; + } + return i; +} + +/* + * ultracam_calculate_fps() + */ +static int ultracam_calculate_fps(struct uvd *uvd) +{ + return 3 + framerate*4 + framerate/2; +} + +/* + * ultracam_adjust_contrast() + */ +static void ultracam_adjust_contrast(struct uvd *uvd) +{ +} + +/* + * ultracam_set_brightness() + * + * This procedure changes brightness of the picture. + */ +static void ultracam_set_brightness(struct uvd *uvd) +{ +} + +static void ultracam_set_hue(struct uvd *uvd) +{ +} + +/* + * ultracam_adjust_picture() + * + * This procedure gets called from V4L interface to update picture settings. + * Here we change brightness and contrast. + */ +static void ultracam_adjust_picture(struct uvd *uvd) +{ + ultracam_adjust_contrast(uvd); + ultracam_set_brightness(uvd); + ultracam_set_hue(uvd); +} + +/* + * ultracam_video_stop() + * + * This code tells camera to stop streaming. The interface remains + * configured and bandwidth - claimed. + */ +static void ultracam_video_stop(struct uvd *uvd) +{ +} + +/* + * ultracam_reinit_iso() + * + * This procedure sends couple of commands to the camera and then + * resets the video pipe. This sequence was observed to reinit the + * camera or, at least, to initiate ISO data stream. + */ +static void ultracam_reinit_iso(struct uvd *uvd, int do_stop) +{ +} + +static void ultracam_video_start(struct uvd *uvd) +{ + ultracam_reinit_iso(uvd, 0); +} + +static int ultracam_resetPipe(struct uvd *uvd) +{ + usb_clear_halt(uvd->dev, uvd->video_endp); + return 0; +} + +static int ultracam_alternateSetting(struct uvd *uvd, int setting) +{ + static const char proc[] = "ultracam_alternateSetting"; + int i; + i = usb_set_interface(uvd->dev, uvd->iface, setting); + if (i < 0) { + err("%s: usb_set_interface error", proc); + uvd->last_error = i; + return -EBUSY; + } + return 0; +} + +/* + * Return negative code on failure, 0 on success. + */ +static int ultracam_setup_on_open(struct uvd *uvd) +{ + int setup_ok = 0; /* Success by default */ + /* Send init sequence only once, it's large! */ + if (!ULTRACAM_T(uvd)->initialized) { + ultracam_alternateSetting(uvd, 0x04); + ultracam_alternateSetting(uvd, 0x00); + ultracam_veio(uvd, 0x02, 0x0004, 0x000b, 1); + ultracam_veio(uvd, 0x02, 0x0001, 0x0005, 1); + ultracam_veio(uvd, 0x02, 0x8000, 0x0000, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1); + ultracam_veio(uvd, 0x00, 0x00b0, 0x0001, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0002, 1); + ultracam_veio(uvd, 0x00, 0x000c, 0x0003, 1); + ultracam_veio(uvd, 0x00, 0x000b, 0x0004, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0005, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0006, 1); + ultracam_veio(uvd, 0x00, 0x0079, 0x0007, 1); + ultracam_veio(uvd, 0x00, 0x003b, 0x0008, 1); + ultracam_veio(uvd, 0x00, 0x0002, 0x000f, 1); + ultracam_veio(uvd, 0x00, 0x0001, 0x0010, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0011, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00bf, 1); + ultracam_veio(uvd, 0x00, 0x0001, 0x00c0, 1); + ultracam_veio(uvd, 0x00, 0x0010, 0x00cb, 1); + ultracam_veio(uvd, 0x01, 0x00a4, 0x0001, 1); + ultracam_veio(uvd, 0x01, 0x0010, 0x0002, 1); + ultracam_veio(uvd, 0x01, 0x0066, 0x0007, 1); + ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1); + ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1); + ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1); + ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1); + ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1); + ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1); + ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1); + ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1); + ultracam_veio(uvd, 0x01, 0x000b, 0x0011, 1); + ultracam_veio(uvd, 0x01, 0x0001, 0x0012, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0013, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0014, 1); + ultracam_veio(uvd, 0x01, 0x0087, 0x0051, 1); + ultracam_veio(uvd, 0x01, 0x0040, 0x0052, 1); + ultracam_veio(uvd, 0x01, 0x0058, 0x0053, 1); + ultracam_veio(uvd, 0x01, 0x0040, 0x0054, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0040, 1); + ultracam_veio(uvd, 0x01, 0x0010, 0x0041, 1); + ultracam_veio(uvd, 0x01, 0x0020, 0x0042, 1); + ultracam_veio(uvd, 0x01, 0x0030, 0x0043, 1); + ultracam_veio(uvd, 0x01, 0x0040, 0x0044, 1); + ultracam_veio(uvd, 0x01, 0x0050, 0x0045, 1); + ultracam_veio(uvd, 0x01, 0x0060, 0x0046, 1); + ultracam_veio(uvd, 0x01, 0x0070, 0x0047, 1); + ultracam_veio(uvd, 0x01, 0x0080, 0x0048, 1); + ultracam_veio(uvd, 0x01, 0x0090, 0x0049, 1); + ultracam_veio(uvd, 0x01, 0x00a0, 0x004a, 1); + ultracam_veio(uvd, 0x01, 0x00b0, 0x004b, 1); + ultracam_veio(uvd, 0x01, 0x00c0, 0x004c, 1); + ultracam_veio(uvd, 0x01, 0x00d0, 0x004d, 1); + ultracam_veio(uvd, 0x01, 0x00e0, 0x004e, 1); + ultracam_veio(uvd, 0x01, 0x00f0, 0x004f, 1); + ultracam_veio(uvd, 0x01, 0x00ff, 0x0050, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0056, 1); + ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0004, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0002, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0020, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0040, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0017, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1); + ultracam_veio(uvd, 0x00, 0x00c0, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_veio(uvd, 0x02, 0xc040, 0x0001, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0008, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x0009, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000b, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000c, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000d, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000e, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x000f, 0); + ultracam_veio(uvd, 0x01, 0x0000, 0x0010, 0); + ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1); + ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1); + ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1); + ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1); + ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1); + ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1); + ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1); + ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1); + ultracam_veio(uvd, 0x01, 0x0000, 0x0001, 0); + ultracam_veio(uvd, 0x01, 0x0064, 0x0001, 1); + ultracam_veio(uvd, 0x01, 0x0059, 0x0051, 1); + ultracam_veio(uvd, 0x01, 0x003f, 0x0052, 1); + ultracam_veio(uvd, 0x01, 0x0094, 0x0053, 1); + ultracam_veio(uvd, 0x01, 0x00ff, 0x0011, 1); + ultracam_veio(uvd, 0x01, 0x0003, 0x0012, 1); + ultracam_veio(uvd, 0x01, 0x00f7, 0x0013, 1); + ultracam_veio(uvd, 0x00, 0x0009, 0x0011, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0001, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1); + ultracam_veio(uvd, 0x00, 0x0020, 0x00c1, 1); + ultracam_veio(uvd, 0x00, 0x0010, 0x00c2, 1); + ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1); + ultracam_alternateSetting(uvd, 0x04); + ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1); + ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1); + ultracam_veio(uvd, 0x02, 0x0000, 0x0006, 1); + ultracam_veio(uvd, 0x02, 0x9000, 0x0007, 1); + ultracam_veio(uvd, 0x02, 0x0042, 0x0001, 1); + ultracam_veio(uvd, 0x02, 0x0000, 0x000b, 0); + ultracam_resetPipe(uvd); + ULTRACAM_T(uvd)->initialized = (setup_ok != 0); + } + return setup_ok; +} + +static void ultracam_configure_video(struct uvd *uvd) +{ + if (uvd == NULL) + return; + + RESTRICT_TO_RANGE(init_brightness, 0, 255); + RESTRICT_TO_RANGE(init_contrast, 0, 255); + RESTRICT_TO_RANGE(init_color, 0, 255); + RESTRICT_TO_RANGE(init_hue, 0, 255); + RESTRICT_TO_RANGE(hue_correction, 0, 255); + + memset(&uvd->vpic, 0, sizeof(uvd->vpic)); + memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old)); + + uvd->vpic.colour = init_color << 8; + uvd->vpic.hue = init_hue << 8; + uvd->vpic.brightness = init_brightness << 8; + uvd->vpic.contrast = init_contrast << 8; + uvd->vpic.whiteness = 105 << 8; /* This one isn't used */ + uvd->vpic.depth = 24; + uvd->vpic.palette = VIDEO_PALETTE_RGB24; + + memset(&uvd->vcap, 0, sizeof(uvd->vcap)); + strcpy(uvd->vcap.name, "IBM Ultra Camera"); + uvd->vcap.type = VID_TYPE_CAPTURE; + uvd->vcap.channels = 1; + uvd->vcap.audios = 0; + uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas); + uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas); + uvd->vcap.minwidth = min_canvasWidth; + uvd->vcap.minheight = min_canvasHeight; + + memset(&uvd->vchan, 0, sizeof(uvd->vchan)); + uvd->vchan.flags = 0; + uvd->vchan.tuners = 0; + uvd->vchan.channel = 0; + uvd->vchan.type = VIDEO_TYPE_CAMERA; + strcpy(uvd->vchan.name, "Camera"); +} + +/* + * ultracam_probe() + * + * This procedure queries device descriptor and accepts the interface + * if it looks like our camera. + * + * History: + * 12-Nov-2000 Reworked to comply with new probe() signature. + * 23-Jan-2001 Added compatibility with 2.2.x kernels. + */ +static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id *devid) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct uvd *uvd = NULL; + int ix, i, nas; + int actInterface=-1, inactInterface=-1, maxPS=0; + unsigned char video_ep = 0; + + if (debug >= 1) + info("ultracam_probe(%p)", intf); + + /* We don't handle multi-config cameras */ + if (dev->descriptor.bNumConfigurations != 1) + return -ENODEV; + + info("IBM Ultra camera found (rev. 0x%04x)", + le16_to_cpu(dev->descriptor.bcdDevice)); + + /* Validate found interface: must have one ISO endpoint */ + nas = intf->num_altsetting; + if (debug > 0) + info("Number of alternate settings=%d.", nas); + if (nas < 8) { + err("Too few alternate settings for this camera!"); + return -ENODEV; + } + /* Validate all alternate settings */ + for (ix=0; ix < nas; ix++) { + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + + interface = &intf->altsetting[ix]; + i = interface->desc.bAlternateSetting; + if (interface->desc.bNumEndpoints != 1) { + err("Interface %d. has %u. endpoints!", + interface->desc.bInterfaceNumber, + (unsigned)(interface->desc.bNumEndpoints)); + return -ENODEV; + } + endpoint = &interface->endpoint[0].desc; + if (video_ep == 0) + video_ep = endpoint->bEndpointAddress; + else if (video_ep != endpoint->bEndpointAddress) { + err("Alternate settings have different endpoint addresses!"); + return -ENODEV; + } + if ((endpoint->bmAttributes & 0x03) != 0x01) { + err("Interface %d. has non-ISO endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & 0x80) == 0) { + err("Interface %d. has ISO OUT endpoint!", + interface->desc.bInterfaceNumber); + return -ENODEV; + } + if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) { + if (inactInterface < 0) + inactInterface = i; + else { + err("More than one inactive alt. setting!"); + return -ENODEV; + } + } else { + if (actInterface < 0) { + actInterface = i; + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + if (debug > 0) + info("Active setting=%d. maxPS=%d.", i, maxPS); + } else { + /* Got another active alt. setting */ + if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) { + /* This one is better! */ + actInterface = i; + maxPS = le16_to_cpu(endpoint->wMaxPacketSize); + if (debug > 0) { + info("Even better ctive setting=%d. maxPS=%d.", + i, maxPS); + } + } + } + } + } + if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) { + err("Failed to recognize the camera!"); + return -ENODEV; + } + + uvd = usbvideo_AllocateDevice(cams); + if (uvd != NULL) { + /* Here uvd is a fully allocated uvd object */ + uvd->flags = flags; + uvd->debug = debug; + uvd->dev = dev; + uvd->iface = intf->altsetting->desc.bInterfaceNumber; + uvd->ifaceAltInactive = inactInterface; + uvd->ifaceAltActive = actInterface; + uvd->video_endp = video_ep; + uvd->iso_packet_len = maxPS; + uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24; + uvd->defaultPalette = VIDEO_PALETTE_RGB24; + uvd->canvas = VIDEOSIZE(640, 480); /* FIXME */ + uvd->videosize = uvd->canvas; /* ultracam_size_to_videosize(size);*/ + + /* Initialize ibmcam-specific data */ + assert(ULTRACAM_T(uvd) != NULL); + ULTRACAM_T(uvd)->camera_model = 0; /* Not used yet */ + ULTRACAM_T(uvd)->initialized = 0; + + ultracam_configure_video(uvd); + + i = usbvideo_RegisterVideoDevice(uvd); + if (i != 0) { + err("usbvideo_RegisterVideoDevice() failed."); + uvd = NULL; + } + } + + if (uvd) { + usb_set_intfdata (intf, uvd); + return 0; + } + return -EIO; +} + + +static struct usb_device_id id_table[] = { + { USB_DEVICE(ULTRACAM_VENDOR_ID, ULTRACAM_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +/* + * ultracam_init() + * + * This code is run to initialize the driver. + */ +static int __init ultracam_init(void) +{ + struct usbvideo_cb cbTbl; + memset(&cbTbl, 0, sizeof(cbTbl)); + cbTbl.probe = ultracam_probe; + cbTbl.setupOnOpen = ultracam_setup_on_open; + cbTbl.videoStart = ultracam_video_start; + cbTbl.videoStop = ultracam_video_stop; + cbTbl.processData = ultracam_ProcessIsocData; + cbTbl.postProcess = usbvideo_DeinterlaceFrame; + cbTbl.adjustPicture = ultracam_adjust_picture; + cbTbl.getFPS = ultracam_calculate_fps; + return usbvideo_register( + &cams, + MAX_CAMERAS, + sizeof(ultracam_t), + "ultracam", + &cbTbl, + THIS_MODULE, + id_table); +} + +static void __exit ultracam_cleanup(void) +{ + usbvideo_Deregister(&cams); +} + +MODULE_DEVICE_TABLE(usb, id_table); +MODULE_LICENSE("GPL"); + +module_init(ultracam_init); +module_exit(ultracam_cleanup); diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c new file mode 100644 index 000000000000..13b37c8c0d56 --- /dev/null +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -0,0 +1,2190 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/smp_lock.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/io.h> + +#include "usbvideo.h" + +#if defined(MAP_NR) +#define virt_to_page(v) MAP_NR(v) /* Kernels 2.2.x */ +#endif + +static int video_nr = -1; +module_param(video_nr, int, 0); + +/* + * Local prototypes. + */ +static void usbvideo_Disconnect(struct usb_interface *intf); +static void usbvideo_CameraRelease(struct uvd *uvd); + +static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma); +static int usbvideo_v4l_open(struct inode *inode, struct file *file); +static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos); +static int usbvideo_v4l_close(struct inode *inode, struct file *file); + +static int usbvideo_StartDataPump(struct uvd *uvd); +static void usbvideo_StopDataPump(struct uvd *uvd); +static int usbvideo_GetFrame(struct uvd *uvd, int frameNum); +static int usbvideo_NewFrame(struct uvd *uvd, int framenum); +static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd, + struct usbvideo_frame *frame); + +/*******************************/ +/* Memory management functions */ +/*******************************/ +static void *usbvideo_rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void usbvideo_rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + +static void RingQueue_Initialize(struct RingQueue *rq) +{ + assert(rq != NULL); + init_waitqueue_head(&rq->wqh); +} + +static void RingQueue_Allocate(struct RingQueue *rq, int rqLen) +{ + /* Make sure the requested size is a power of 2 and + round up if necessary. This allows index wrapping + using masks rather than modulo */ + + int i = 1; + assert(rq != NULL); + assert(rqLen > 0); + + while(rqLen >> i) + i++; + if(rqLen != 1 << (i-1)) + rqLen = 1 << i; + + rq->length = rqLen; + rq->ri = rq->wi = 0; + rq->queue = usbvideo_rvmalloc(rq->length); + assert(rq->queue != NULL); +} + +static int RingQueue_IsAllocated(const struct RingQueue *rq) +{ + if (rq == NULL) + return 0; + return (rq->queue != NULL) && (rq->length > 0); +} + +static void RingQueue_Free(struct RingQueue *rq) +{ + assert(rq != NULL); + if (RingQueue_IsAllocated(rq)) { + usbvideo_rvfree(rq->queue, rq->length); + rq->queue = NULL; + rq->length = 0; + } +} + +int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len) +{ + int rql, toread; + + assert(rq != NULL); + assert(dst != NULL); + + rql = RingQueue_GetLength(rq); + if(!rql) + return 0; + + /* Clip requested length to available data */ + if(len > rql) + len = rql; + + toread = len; + if(rq->ri > rq->wi) { + /* Read data from tail */ + int read = (toread < (rq->length - rq->ri)) ? toread : rq->length - rq->ri; + memcpy(dst, rq->queue + rq->ri, read); + toread -= read; + dst += read; + rq->ri = (rq->ri + read) & (rq->length-1); + } + if(toread) { + /* Read data from head */ + memcpy(dst, rq->queue + rq->ri, toread); + rq->ri = (rq->ri + toread) & (rq->length-1); + } + return len; +} + +EXPORT_SYMBOL(RingQueue_Dequeue); + +int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n) +{ + int enqueued = 0; + + assert(rq != NULL); + assert(cdata != NULL); + assert(rq->length > 0); + while (n > 0) { + int m, q_avail; + + /* Calculate the largest chunk that fits the tail of the ring */ + q_avail = rq->length - rq->wi; + if (q_avail <= 0) { + rq->wi = 0; + q_avail = rq->length; + } + m = n; + assert(q_avail > 0); + if (m > q_avail) + m = q_avail; + + memcpy(rq->queue + rq->wi, cdata, m); + RING_QUEUE_ADVANCE_INDEX(rq, wi, m); + cdata += m; + enqueued += m; + n -= m; + } + return enqueued; +} + +EXPORT_SYMBOL(RingQueue_Enqueue); + +static void RingQueue_InterruptibleSleepOn(struct RingQueue *rq) +{ + assert(rq != NULL); + interruptible_sleep_on(&rq->wqh); +} + +void RingQueue_WakeUpInterruptible(struct RingQueue *rq) +{ + assert(rq != NULL); + if (waitqueue_active(&rq->wqh)) + wake_up_interruptible(&rq->wqh); +} + +EXPORT_SYMBOL(RingQueue_WakeUpInterruptible); + +void RingQueue_Flush(struct RingQueue *rq) +{ + assert(rq != NULL); + rq->ri = 0; + rq->wi = 0; +} + +EXPORT_SYMBOL(RingQueue_Flush); + + +/* + * usbvideo_VideosizeToString() + * + * This procedure converts given videosize value to readable string. + * + * History: + * 07-Aug-2000 Created. + * 19-Oct-2000 Reworked for usbvideo module. + */ +static void usbvideo_VideosizeToString(char *buf, int bufLen, videosize_t vs) +{ + char tmp[40]; + int n; + + n = 1 + sprintf(tmp, "%ldx%ld", VIDEOSIZE_X(vs), VIDEOSIZE_Y(vs)); + assert(n < sizeof(tmp)); + if ((buf == NULL) || (bufLen < n)) + err("usbvideo_VideosizeToString: buffer is too small."); + else + memmove(buf, tmp, n); +} + +/* + * usbvideo_OverlayChar() + * + * History: + * 01-Feb-2000 Created. + */ +static void usbvideo_OverlayChar(struct uvd *uvd, struct usbvideo_frame *frame, + int x, int y, int ch) +{ + static const unsigned short digits[16] = { + 0xF6DE, /* 0 */ + 0x2492, /* 1 */ + 0xE7CE, /* 2 */ + 0xE79E, /* 3 */ + 0xB792, /* 4 */ + 0xF39E, /* 5 */ + 0xF3DE, /* 6 */ + 0xF492, /* 7 */ + 0xF7DE, /* 8 */ + 0xF79E, /* 9 */ + 0x77DA, /* a */ + 0xD75C, /* b */ + 0xF24E, /* c */ + 0xD6DC, /* d */ + 0xF34E, /* e */ + 0xF348 /* f */ + }; + unsigned short digit; + int ix, iy; + + if ((uvd == NULL) || (frame == NULL)) + return; + + if (ch >= '0' && ch <= '9') + ch -= '0'; + else if (ch >= 'A' && ch <= 'F') + ch = 10 + (ch - 'A'); + else if (ch >= 'a' && ch <= 'f') + ch = 10 + (ch - 'a'); + else + return; + digit = digits[ch]; + + for (iy=0; iy < 5; iy++) { + for (ix=0; ix < 3; ix++) { + if (digit & 0x8000) { + if (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24)) { +/* TODO */ RGB24_PUTPIXEL(frame, x+ix, y+iy, 0xFF, 0xFF, 0xFF); + } + } + digit = digit << 1; + } + } +} + +/* + * usbvideo_OverlayString() + * + * History: + * 01-Feb-2000 Created. + */ +static void usbvideo_OverlayString(struct uvd *uvd, struct usbvideo_frame *frame, + int x, int y, const char *str) +{ + while (*str) { + usbvideo_OverlayChar(uvd, frame, x, y, *str); + str++; + x += 4; /* 3 pixels character + 1 space */ + } +} + +/* + * usbvideo_OverlayStats() + * + * Overlays important debugging information. + * + * History: + * 01-Feb-2000 Created. + */ +static void usbvideo_OverlayStats(struct uvd *uvd, struct usbvideo_frame *frame) +{ + const int y_diff = 8; + char tmp[16]; + int x = 10, y=10; + long i, j, barLength; + const int qi_x1 = 60, qi_y1 = 10; + const int qi_x2 = VIDEOSIZE_X(frame->request) - 10, qi_h = 10; + + /* Call the user callback, see if we may proceed after that */ + if (VALID_CALLBACK(uvd, overlayHook)) { + if (GET_CALLBACK(uvd, overlayHook)(uvd, frame) < 0) + return; + } + + /* + * We draw a (mostly) hollow rectangle with qi_xxx coordinates. + * Left edge symbolizes the queue index 0; right edge symbolizes + * the full capacity of the queue. + */ + barLength = qi_x2 - qi_x1 - 2; + if ((barLength > 10) && (uvd->paletteBits & (1L << VIDEO_PALETTE_RGB24))) { +/* TODO */ long u_lo, u_hi, q_used; + long m_ri, m_wi, m_lo, m_hi; + + /* + * Determine fill zones (used areas of the queue): + * 0 xxxxxxx u_lo ...... uvd->dp.ri xxxxxxxx u_hi ..... uvd->dp.length + * + * if u_lo < 0 then there is no first filler. + */ + + q_used = RingQueue_GetLength(&uvd->dp); + if ((uvd->dp.ri + q_used) >= uvd->dp.length) { + u_hi = uvd->dp.length; + u_lo = (q_used + uvd->dp.ri) & (uvd->dp.length-1); + } else { + u_hi = (q_used + uvd->dp.ri); + u_lo = -1; + } + + /* Convert byte indices into screen units */ + m_ri = qi_x1 + ((barLength * uvd->dp.ri) / uvd->dp.length); + m_wi = qi_x1 + ((barLength * uvd->dp.wi) / uvd->dp.length); + m_lo = (u_lo > 0) ? (qi_x1 + ((barLength * u_lo) / uvd->dp.length)) : -1; + m_hi = qi_x1 + ((barLength * u_hi) / uvd->dp.length); + + for (j=qi_y1; j < (qi_y1 + qi_h); j++) { + for (i=qi_x1; i < qi_x2; i++) { + /* Draw border lines */ + if ((j == qi_y1) || (j == (qi_y1 + qi_h - 1)) || + (i == qi_x1) || (i == (qi_x2 - 1))) { + RGB24_PUTPIXEL(frame, i, j, 0xFF, 0xFF, 0xFF); + continue; + } + /* For all other points the Y coordinate does not matter */ + if ((i >= m_ri) && (i <= (m_ri + 3))) { + RGB24_PUTPIXEL(frame, i, j, 0x00, 0xFF, 0x00); + } else if ((i >= m_wi) && (i <= (m_wi + 3))) { + RGB24_PUTPIXEL(frame, i, j, 0xFF, 0x00, 0x00); + } else if ((i < m_lo) || ((i > m_ri) && (i < m_hi))) + RGB24_PUTPIXEL(frame, i, j, 0x00, 0x00, 0xFF); + } + } + } + + sprintf(tmp, "%8lx", uvd->stats.frame_num); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.urb_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.urb_length); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.data_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.header_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.iso_skip_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8lx", uvd->stats.iso_err_count); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.colour); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.hue); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.brightness >> 8); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8x", uvd->vpic.contrast >> 12); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; + + sprintf(tmp, "%8d", uvd->vpic.whiteness >> 8); + usbvideo_OverlayString(uvd, frame, x, y, tmp); + y += y_diff; +} + +/* + * usbvideo_ReportStatistics() + * + * This procedure prints packet and transfer statistics. + * + * History: + * 14-Jan-2000 Corrected default multiplier. + */ +static void usbvideo_ReportStatistics(const struct uvd *uvd) +{ + if ((uvd != NULL) && (uvd->stats.urb_count > 0)) { + unsigned long allPackets, badPackets, goodPackets, percent; + allPackets = uvd->stats.urb_count * CAMERA_URB_FRAMES; + badPackets = uvd->stats.iso_skip_count + uvd->stats.iso_err_count; + goodPackets = allPackets - badPackets; + /* Calculate percentage wisely, remember integer limits */ + assert(allPackets != 0); + if (goodPackets < (((unsigned long)-1)/100)) + percent = (100 * goodPackets) / allPackets; + else + percent = goodPackets / (allPackets / 100); + info("Packet Statistics: Total=%lu. Empty=%lu. Usage=%lu%%", + allPackets, badPackets, percent); + if (uvd->iso_packet_len > 0) { + unsigned long allBytes, xferBytes; + char multiplier = ' '; + allBytes = allPackets * uvd->iso_packet_len; + xferBytes = uvd->stats.data_count; + assert(allBytes != 0); + if (xferBytes < (((unsigned long)-1)/100)) + percent = (100 * xferBytes) / allBytes; + else + percent = xferBytes / (allBytes / 100); + /* Scale xferBytes for easy reading */ + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'K'; + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'M'; + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'G'; + if (xferBytes > 10*1024) { + xferBytes /= 1024; + multiplier = 'T'; + } + } + } + } + info("Transfer Statistics: Transferred=%lu%cB Usage=%lu%%", + xferBytes, multiplier, percent); + } + } +} + +/* + * usbvideo_TestPattern() + * + * Procedure forms a test pattern (yellow grid on blue background). + * + * Parameters: + * fullframe: if TRUE then entire frame is filled, otherwise the procedure + * continues from the current scanline. + * pmode 0: fill the frame with solid blue color (like on VCR or TV) + * 1: Draw a colored grid + * + * History: + * 01-Feb-2000 Created. + */ +void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode) +{ + struct usbvideo_frame *frame; + int num_cell = 0; + int scan_length = 0; + static int num_pass = 0; + + if (uvd == NULL) { + err("%s: uvd == NULL", __FUNCTION__); + return; + } + if ((uvd->curframe < 0) || (uvd->curframe >= USBVIDEO_NUMFRAMES)) { + err("%s: uvd->curframe=%d.", __FUNCTION__, uvd->curframe); + return; + } + + /* Grab the current frame */ + frame = &uvd->frame[uvd->curframe]; + + /* Optionally start at the beginning */ + if (fullframe) { + frame->curline = 0; + frame->seqRead_Length = 0; + } +#if 0 + { /* For debugging purposes only */ + char tmp[20]; + usbvideo_VideosizeToString(tmp, sizeof(tmp), frame->request); + info("testpattern: frame=%s", tmp); + } +#endif + /* Form every scan line */ + for (; frame->curline < VIDEOSIZE_Y(frame->request); frame->curline++) { + int i; + unsigned char *f = frame->data + + (VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL * frame->curline); + for (i=0; i < VIDEOSIZE_X(frame->request); i++) { + unsigned char cb=0x80; + unsigned char cg = 0; + unsigned char cr = 0; + + if (pmode == 1) { + if (frame->curline % 32 == 0) + cb = 0, cg = cr = 0xFF; + else if (i % 32 == 0) { + if (frame->curline % 32 == 1) + num_cell++; + cb = 0, cg = cr = 0xFF; + } else { + cb = ((num_cell*7) + num_pass) & 0xFF; + cg = ((num_cell*5) + num_pass*2) & 0xFF; + cr = ((num_cell*3) + num_pass*3) & 0xFF; + } + } else { + /* Just the blue screen */ + } + + *f++ = cb; + *f++ = cg; + *f++ = cr; + scan_length += 3; + } + } + + frame->frameState = FrameState_Done; + frame->seqRead_Length += scan_length; + ++num_pass; + + /* We do this unconditionally, regardless of FLAGS_OVERLAY_STATS */ + usbvideo_OverlayStats(uvd, frame); +} + +EXPORT_SYMBOL(usbvideo_TestPattern); + + +#ifdef DEBUG +/* + * usbvideo_HexDump() + * + * A debugging tool. Prints hex dumps. + * + * History: + * 29-Jul-2000 Added printing of offsets. + */ +void usbvideo_HexDump(const unsigned char *data, int len) +{ + const int bytes_per_line = 32; + char tmp[128]; /* 32*3 + 5 */ + int i, k; + + for (i=k=0; len > 0; i++, len--) { + if (i > 0 && ((i % bytes_per_line) == 0)) { + printk("%s\n", tmp); + k=0; + } + if ((i % bytes_per_line) == 0) + k += sprintf(&tmp[k], "%04x: ", i); + k += sprintf(&tmp[k], "%02x ", data[i]); + } + if (k > 0) + printk("%s\n", tmp); +} + +EXPORT_SYMBOL(usbvideo_HexDump); + +#endif + +/* ******************************************************************** */ + +/* XXX: this piece of crap really wants some error handling.. */ +static void usbvideo_ClientIncModCount(struct uvd *uvd) +{ + if (uvd == NULL) { + err("%s: uvd == NULL", __FUNCTION__); + return; + } + if (uvd->handle == NULL) { + err("%s: uvd->handle == NULL", __FUNCTION__); + return; + } + if (uvd->handle->md_module == NULL) { + err("%s: uvd->handle->md_module == NULL", __FUNCTION__); + return; + } + if (!try_module_get(uvd->handle->md_module)) { + err("%s: try_module_get() == 0", __FUNCTION__); + return; + } +} + +static void usbvideo_ClientDecModCount(struct uvd *uvd) +{ + if (uvd == NULL) { + err("%s: uvd == NULL", __FUNCTION__); + return; + } + if (uvd->handle == NULL) { + err("%s: uvd->handle == NULL", __FUNCTION__); + return; + } + if (uvd->handle->md_module == NULL) { + err("%s: uvd->handle->md_module == NULL", __FUNCTION__); + return; + } + module_put(uvd->handle->md_module); +} + +int usbvideo_register( + struct usbvideo **pCams, + const int num_cams, + const int num_extra, + const char *driverName, + const struct usbvideo_cb *cbTbl, + struct module *md, + const struct usb_device_id *id_table) +{ + struct usbvideo *cams; + int i, base_size, result; + + /* Check parameters for sanity */ + if ((num_cams <= 0) || (pCams == NULL) || (cbTbl == NULL)) { + err("%s: Illegal call", __FUNCTION__); + return -EINVAL; + } + + /* Check registration callback - must be set! */ + if (cbTbl->probe == NULL) { + err("%s: probe() is required!", __FUNCTION__); + return -EINVAL; + } + + base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo); + cams = (struct usbvideo *) kzalloc(base_size, GFP_KERNEL); + if (cams == NULL) { + err("Failed to allocate %d. bytes for usbvideo struct", base_size); + return -ENOMEM; + } + dbg("%s: Allocated $%p (%d. bytes) for %d. cameras", + __FUNCTION__, cams, base_size, num_cams); + + /* Copy callbacks, apply defaults for those that are not set */ + memmove(&cams->cb, cbTbl, sizeof(cams->cb)); + if (cams->cb.getFrame == NULL) + cams->cb.getFrame = usbvideo_GetFrame; + if (cams->cb.disconnect == NULL) + cams->cb.disconnect = usbvideo_Disconnect; + if (cams->cb.startDataPump == NULL) + cams->cb.startDataPump = usbvideo_StartDataPump; + if (cams->cb.stopDataPump == NULL) + cams->cb.stopDataPump = usbvideo_StopDataPump; + + cams->num_cameras = num_cams; + cams->cam = (struct uvd *) &cams[1]; + cams->md_module = md; + if (cams->md_module == NULL) + warn("%s: module == NULL!", __FUNCTION__); + mutex_init(&cams->lock); /* to 1 == available */ + + for (i = 0; i < num_cams; i++) { + struct uvd *up = &cams->cam[i]; + + up->handle = cams; + + /* Allocate user_data separately because of kmalloc's limits */ + if (num_extra > 0) { + up->user_size = num_cams * num_extra; + up->user_data = kmalloc(up->user_size, GFP_KERNEL); + if (up->user_data == NULL) { + err("%s: Failed to allocate user_data (%d. bytes)", + __FUNCTION__, up->user_size); + while (i) { + up = &cams->cam[--i]; + kfree(up->user_data); + } + kfree(cams); + return -ENOMEM; + } + dbg("%s: Allocated cams[%d].user_data=$%p (%d. bytes)", + __FUNCTION__, i, up->user_data, up->user_size); + } + } + + /* + * Register ourselves with USB stack. + */ + strcpy(cams->drvName, (driverName != NULL) ? driverName : "Unknown"); + cams->usbdrv.name = cams->drvName; + cams->usbdrv.probe = cams->cb.probe; + cams->usbdrv.disconnect = cams->cb.disconnect; + cams->usbdrv.id_table = id_table; + + /* + * Update global handle to usbvideo. This is very important + * because probe() can be called before usb_register() returns. + * If the handle is not yet updated then the probe() will fail. + */ + *pCams = cams; + result = usb_register(&cams->usbdrv); + if (result) { + for (i = 0; i < num_cams; i++) { + struct uvd *up = &cams->cam[i]; + kfree(up->user_data); + } + kfree(cams); + } + + return result; +} + +EXPORT_SYMBOL(usbvideo_register); + +/* + * usbvideo_Deregister() + * + * Procedure frees all usbvideo and user data structures. Be warned that + * if you had some dynamically allocated components in ->user field then + * you should free them before calling here. + */ +void usbvideo_Deregister(struct usbvideo **pCams) +{ + struct usbvideo *cams; + int i; + + if (pCams == NULL) { + err("%s: pCams == NULL", __FUNCTION__); + return; + } + cams = *pCams; + if (cams == NULL) { + err("%s: cams == NULL", __FUNCTION__); + return; + } + + dbg("%s: Deregistering %s driver.", __FUNCTION__, cams->drvName); + usb_deregister(&cams->usbdrv); + + dbg("%s: Deallocating cams=$%p (%d. cameras)", __FUNCTION__, cams, cams->num_cameras); + for (i=0; i < cams->num_cameras; i++) { + struct uvd *up = &cams->cam[i]; + int warning = 0; + + if (up->user_data != NULL) { + if (up->user_size <= 0) + ++warning; + } else { + if (up->user_size > 0) + ++warning; + } + if (warning) { + err("%s: Warning: user_data=$%p user_size=%d.", + __FUNCTION__, up->user_data, up->user_size); + } else { + dbg("%s: Freeing %d. $%p->user_data=$%p", + __FUNCTION__, i, up, up->user_data); + kfree(up->user_data); + } + } + /* Whole array was allocated in one chunk */ + dbg("%s: Freed %d uvd structures", + __FUNCTION__, cams->num_cameras); + kfree(cams); + *pCams = NULL; +} + +EXPORT_SYMBOL(usbvideo_Deregister); + +/* + * usbvideo_Disconnect() + * + * This procedure stops all driver activity. Deallocation of + * the interface-private structure (pointed by 'ptr') is done now + * (if we don't have any open files) or later, when those files + * are closed. After that driver should be removable. + * + * This code handles surprise removal. The uvd->user is a counter which + * increments on open() and decrements on close(). If we see here that + * this counter is not 0 then we have a client who still has us opened. + * We set uvd->remove_pending flag as early as possible, and after that + * all access to the camera will gracefully fail. These failures should + * prompt client to (eventually) close the video device, and then - in + * usbvideo_v4l_close() - we decrement uvd->uvd_used and usage counter. + * + * History: + * 22-Jan-2000 Added polling of MOD_IN_USE to delay removal until all users gone. + * 27-Jan-2000 Reworked to allow pending disconnects; see xxx_close() + * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT). + * 19-Oct-2000 Moved to usbvideo module. + */ +static void usbvideo_Disconnect(struct usb_interface *intf) +{ + struct uvd *uvd = usb_get_intfdata (intf); + int i; + + if (uvd == NULL) { + err("%s($%p): Illegal call.", __FUNCTION__, intf); + return; + } + + usb_set_intfdata (intf, NULL); + + usbvideo_ClientIncModCount(uvd); + if (uvd->debug > 0) + info("%s(%p.)", __FUNCTION__, intf); + + mutex_lock(&uvd->lock); + uvd->remove_pending = 1; /* Now all ISO data will be ignored */ + + /* At this time we ask to cancel outstanding URBs */ + GET_CALLBACK(uvd, stopDataPump)(uvd); + + for (i=0; i < USBVIDEO_NUMSBUF; i++) + usb_free_urb(uvd->sbuf[i].urb); + + usb_put_dev(uvd->dev); + uvd->dev = NULL; /* USB device is no more */ + + video_unregister_device(&uvd->vdev); + if (uvd->debug > 0) + info("%s: Video unregistered.", __FUNCTION__); + + if (uvd->user) + info("%s: In use, disconnect pending.", __FUNCTION__); + else + usbvideo_CameraRelease(uvd); + mutex_unlock(&uvd->lock); + info("USB camera disconnected."); + + usbvideo_ClientDecModCount(uvd); +} + +/* + * usbvideo_CameraRelease() + * + * This code does final release of uvd. This happens + * after the device is disconnected -and- all clients + * closed their files. + * + * History: + * 27-Jan-2000 Created. + */ +static void usbvideo_CameraRelease(struct uvd *uvd) +{ + if (uvd == NULL) { + err("%s: Illegal call", __FUNCTION__); + return; + } + + RingQueue_Free(&uvd->dp); + if (VALID_CALLBACK(uvd, userFree)) + GET_CALLBACK(uvd, userFree)(uvd); + uvd->uvd_used = 0; /* This is atomic, no need to take mutex */ +} + +/* + * usbvideo_find_struct() + * + * This code searches the array of preallocated (static) structures + * and returns index of the first one that isn't in use. Returns -1 + * if there are no free structures. + * + * History: + * 27-Jan-2000 Created. + */ +static int usbvideo_find_struct(struct usbvideo *cams) +{ + int u, rv = -1; + + if (cams == NULL) { + err("No usbvideo handle?"); + return -1; + } + mutex_lock(&cams->lock); + for (u = 0; u < cams->num_cameras; u++) { + struct uvd *uvd = &cams->cam[u]; + if (!uvd->uvd_used) /* This one is free */ + { + uvd->uvd_used = 1; /* In use now */ + mutex_init(&uvd->lock); /* to 1 == available */ + uvd->dev = NULL; + rv = u; + break; + } + } + mutex_unlock(&cams->lock); + return rv; +} + +static struct file_operations usbvideo_fops = { + .owner = THIS_MODULE, + .open = usbvideo_v4l_open, + .release =usbvideo_v4l_close, + .read = usbvideo_v4l_read, + .mmap = usbvideo_v4l_mmap, + .ioctl = usbvideo_v4l_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; +static const struct video_device usbvideo_template = { + .owner = THIS_MODULE, + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_CPIA, + .fops = &usbvideo_fops, +}; + +struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams) +{ + int i, devnum; + struct uvd *uvd = NULL; + + if (cams == NULL) { + err("No usbvideo handle?"); + return NULL; + } + + devnum = usbvideo_find_struct(cams); + if (devnum == -1) { + err("IBM USB camera driver: Too many devices!"); + return NULL; + } + uvd = &cams->cam[devnum]; + dbg("Device entry #%d. at $%p", devnum, uvd); + + /* Not relying upon caller we increase module counter ourselves */ + usbvideo_ClientIncModCount(uvd); + + mutex_lock(&uvd->lock); + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + uvd->sbuf[i].urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL); + if (uvd->sbuf[i].urb == NULL) { + err("usb_alloc_urb(%d.) failed.", FRAMES_PER_DESC); + uvd->uvd_used = 0; + uvd = NULL; + goto allocate_done; + } + } + uvd->user=0; + uvd->remove_pending = 0; + uvd->last_error = 0; + RingQueue_Initialize(&uvd->dp); + + /* Initialize video device structure */ + uvd->vdev = usbvideo_template; + sprintf(uvd->vdev.name, "%.20s USB Camera", cams->drvName); + /* + * The client is free to overwrite those because we + * return control to the client's probe function right now. + */ +allocate_done: + mutex_unlock(&uvd->lock); + usbvideo_ClientDecModCount(uvd); + return uvd; +} + +EXPORT_SYMBOL(usbvideo_AllocateDevice); + +int usbvideo_RegisterVideoDevice(struct uvd *uvd) +{ + char tmp1[20], tmp2[20]; /* Buffers for printing */ + + if (uvd == NULL) { + err("%s: Illegal call.", __FUNCTION__); + return -EINVAL; + } + if (uvd->video_endp == 0) { + info("%s: No video endpoint specified; data pump disabled.", __FUNCTION__); + } + if (uvd->paletteBits == 0) { + err("%s: No palettes specified!", __FUNCTION__); + return -EINVAL; + } + if (uvd->defaultPalette == 0) { + info("%s: No default palette!", __FUNCTION__); + } + + uvd->max_frame_size = VIDEOSIZE_X(uvd->canvas) * + VIDEOSIZE_Y(uvd->canvas) * V4L_BYTES_PER_PIXEL; + usbvideo_VideosizeToString(tmp1, sizeof(tmp1), uvd->videosize); + usbvideo_VideosizeToString(tmp2, sizeof(tmp2), uvd->canvas); + + if (uvd->debug > 0) { + info("%s: iface=%d. endpoint=$%02x paletteBits=$%08lx", + __FUNCTION__, uvd->iface, uvd->video_endp, uvd->paletteBits); + } + if (video_register_device(&uvd->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + err("%s: video_register_device failed", __FUNCTION__); + return -EPIPE; + } + if (uvd->debug > 1) { + info("%s: video_register_device() successful", __FUNCTION__); + } + if (uvd->dev == NULL) { + err("%s: uvd->dev == NULL", __FUNCTION__); + return -EINVAL; + } + + info("%s on /dev/video%d: canvas=%s videosize=%s", + (uvd->handle != NULL) ? uvd->handle->drvName : "???", + uvd->vdev.minor, tmp2, tmp1); + + usb_get_dev(uvd->dev); + return 0; +} + +EXPORT_SYMBOL(usbvideo_RegisterVideoDevice); + +/* ******************************************************************** */ + +static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct uvd *uvd = file->private_data; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + unsigned long page, pos; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return -EFAULT; + + if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))) + return -EINVAL; + + pos = (unsigned long) uvd->fbuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) + return -EAGAIN; + + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + return 0; +} + +/* + * usbvideo_v4l_open() + * + * This is part of Video 4 Linux API. The driver can be opened by one + * client only (checks internal counter 'uvdser'). The procedure + * then allocates buffers needed for video processing. + * + * History: + * 22-Jan-2000 Rewrote, moved scratch buffer allocation here. Now the + * camera is also initialized here (once per connect), at + * expense of V4L client (it waits on open() call). + * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers. + * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT). + */ +static int usbvideo_v4l_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct uvd *uvd = (struct uvd *) dev; + const int sb_size = FRAMES_PER_DESC * uvd->iso_packet_len; + int i, errCode = 0; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, dev); + + usbvideo_ClientIncModCount(uvd); + mutex_lock(&uvd->lock); + + if (uvd->user) { + err("%s: Someone tried to open an already opened device!", __FUNCTION__); + errCode = -EBUSY; + } else { + /* Clear statistics */ + memset(&uvd->stats, 0, sizeof(uvd->stats)); + + /* Clean pointers so we know if we allocated something */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) + uvd->sbuf[i].data = NULL; + + /* Allocate memory for the frame buffers */ + uvd->fbuf_size = USBVIDEO_NUMFRAMES * uvd->max_frame_size; + uvd->fbuf = usbvideo_rvmalloc(uvd->fbuf_size); + RingQueue_Allocate(&uvd->dp, RING_QUEUE_SIZE); + if ((uvd->fbuf == NULL) || + (!RingQueue_IsAllocated(&uvd->dp))) { + err("%s: Failed to allocate fbuf or dp", __FUNCTION__); + errCode = -ENOMEM; + } else { + /* Allocate all buffers */ + for (i=0; i < USBVIDEO_NUMFRAMES; i++) { + uvd->frame[i].frameState = FrameState_Unused; + uvd->frame[i].data = uvd->fbuf + i*(uvd->max_frame_size); + /* + * Set default sizes in case IOCTL (VIDIOCMCAPTURE) + * is not used (using read() instead). + */ + uvd->frame[i].canvas = uvd->canvas; + uvd->frame[i].seqRead_Index = 0; + } + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + uvd->sbuf[i].data = kmalloc(sb_size, GFP_KERNEL); + if (uvd->sbuf[i].data == NULL) { + errCode = -ENOMEM; + break; + } + } + } + if (errCode != 0) { + /* Have to free all that memory */ + if (uvd->fbuf != NULL) { + usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size); + uvd->fbuf = NULL; + } + RingQueue_Free(&uvd->dp); + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + kfree(uvd->sbuf[i].data); + uvd->sbuf[i].data = NULL; + } + } + } + + /* If so far no errors then we shall start the camera */ + if (errCode == 0) { + /* Start data pump if we have valid endpoint */ + if (uvd->video_endp != 0) + errCode = GET_CALLBACK(uvd, startDataPump)(uvd); + if (errCode == 0) { + if (VALID_CALLBACK(uvd, setupOnOpen)) { + if (uvd->debug > 1) + info("%s: setupOnOpen callback", __FUNCTION__); + errCode = GET_CALLBACK(uvd, setupOnOpen)(uvd); + if (errCode < 0) { + err("%s: setupOnOpen callback failed (%d.).", + __FUNCTION__, errCode); + } else if (uvd->debug > 1) { + info("%s: setupOnOpen callback successful", __FUNCTION__); + } + } + if (errCode == 0) { + uvd->settingsAdjusted = 0; + if (uvd->debug > 1) + info("%s: Open succeeded.", __FUNCTION__); + uvd->user++; + file->private_data = uvd; + } + } + } + mutex_unlock(&uvd->lock); + if (errCode != 0) + usbvideo_ClientDecModCount(uvd); + if (uvd->debug > 0) + info("%s: Returning %d.", __FUNCTION__, errCode); + return errCode; +} + +/* + * usbvideo_v4l_close() + * + * This is part of Video 4 Linux API. The procedure + * stops streaming and deallocates all buffers that were earlier + * allocated in usbvideo_v4l_open(). + * + * History: + * 22-Jan-2000 Moved scratch buffer deallocation here. + * 27-Jan-2000 Used USBVIDEO_NUMSBUF as number of URB buffers. + * 24-May-2000 Moved MOD_DEC_USE_COUNT outside of code that can sleep. + */ +static int usbvideo_v4l_close(struct inode *inode, struct file *file) +{ + struct video_device *dev = file->private_data; + struct uvd *uvd = (struct uvd *) dev; + int i; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, dev); + + mutex_lock(&uvd->lock); + GET_CALLBACK(uvd, stopDataPump)(uvd); + usbvideo_rvfree(uvd->fbuf, uvd->fbuf_size); + uvd->fbuf = NULL; + RingQueue_Free(&uvd->dp); + + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + kfree(uvd->sbuf[i].data); + uvd->sbuf[i].data = NULL; + } + +#if USBVIDEO_REPORT_STATS + usbvideo_ReportStatistics(uvd); +#endif + + uvd->user--; + if (uvd->remove_pending) { + if (uvd->debug > 0) + info("usbvideo_v4l_close: Final disconnect."); + usbvideo_CameraRelease(uvd); + } + mutex_unlock(&uvd->lock); + usbvideo_ClientDecModCount(uvd); + + if (uvd->debug > 1) + info("%s: Completed.", __FUNCTION__); + file->private_data = NULL; + return 0; +} + +/* + * usbvideo_v4l_ioctl() + * + * This is part of Video 4 Linux API. The procedure handles ioctl() calls. + * + * History: + * 22-Jan-2000 Corrected VIDIOCSPICT to reject unsupported settings. + */ +static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct uvd *uvd = file->private_data; + + if (!CAMERA_IS_OPERATIONAL(uvd)) + return -EIO; + + switch (cmd) { + case VIDIOCGCAP: + { + struct video_capability *b = arg; + *b = uvd->vcap; + return 0; + } + case VIDIOCGCHAN: + { + struct video_channel *v = arg; + *v = uvd->vchan; + return 0; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; + if (v->channel != 0) + return -EINVAL; + return 0; + } + case VIDIOCGPICT: + { + struct video_picture *pic = arg; + *pic = uvd->vpic; + return 0; + } + case VIDIOCSPICT: + { + struct video_picture *pic = arg; + /* + * Use temporary 'video_picture' structure to preserve our + * own settings (such as color depth, palette) that we + * aren't allowing everyone (V4L client) to change. + */ + uvd->vpic.brightness = pic->brightness; + uvd->vpic.hue = pic->hue; + uvd->vpic.colour = pic->colour; + uvd->vpic.contrast = pic->contrast; + uvd->settingsAdjusted = 0; /* Will force new settings */ + return 0; + } + case VIDIOCSWIN: + { + struct video_window *vw = arg; + + if(VALID_CALLBACK(uvd, setVideoMode)) { + return GET_CALLBACK(uvd, setVideoMode)(uvd, vw); + } + + if (vw->flags) + return -EINVAL; + if (vw->clipcount) + return -EINVAL; + if (vw->width != VIDEOSIZE_X(uvd->canvas)) + return -EINVAL; + if (vw->height != VIDEOSIZE_Y(uvd->canvas)) + return -EINVAL; + + return 0; + } + case VIDIOCGWIN: + { + struct video_window *vw = arg; + + vw->x = 0; + vw->y = 0; + vw->width = VIDEOSIZE_X(uvd->videosize); + vw->height = VIDEOSIZE_Y(uvd->videosize); + vw->chromakey = 0; + if (VALID_CALLBACK(uvd, getFPS)) + vw->flags = GET_CALLBACK(uvd, getFPS)(uvd); + else + vw->flags = 10; /* FIXME: do better! */ + return 0; + } + case VIDIOCGMBUF: + { + struct video_mbuf *vm = arg; + int i; + + memset(vm, 0, sizeof(*vm)); + vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES; + vm->frames = USBVIDEO_NUMFRAMES; + for(i = 0; i < USBVIDEO_NUMFRAMES; i++) + vm->offsets[i] = i * uvd->max_frame_size; + + return 0; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *vm = arg; + + if (uvd->debug >= 1) { + info("VIDIOCMCAPTURE: frame=%d. size=%dx%d, format=%d.", + vm->frame, vm->width, vm->height, vm->format); + } + /* + * Check if the requested size is supported. If the requestor + * requests too big a frame then we may be tricked into accessing + * outside of own preallocated frame buffer (in uvd->frame). + * This will cause oops or a security hole. Theoretically, we + * could only clamp the size down to acceptable bounds, but then + * we'd need to figure out how to insert our smaller buffer into + * larger caller's buffer... this is not an easy question. So we + * here just flatly reject too large requests, assuming that the + * caller will resubmit with smaller size. Callers should know + * what size we support (returned by VIDIOCGCAP). However vidcat, + * for one, does not care and allows to ask for any size. + */ + if ((vm->width > VIDEOSIZE_X(uvd->canvas)) || + (vm->height > VIDEOSIZE_Y(uvd->canvas))) { + if (uvd->debug > 0) { + info("VIDIOCMCAPTURE: Size=%dx%d too large; " + "allowed only up to %ldx%ld", vm->width, vm->height, + VIDEOSIZE_X(uvd->canvas), VIDEOSIZE_Y(uvd->canvas)); + } + return -EINVAL; + } + /* Check if the palette is supported */ + if (((1L << vm->format) & uvd->paletteBits) == 0) { + if (uvd->debug > 0) { + info("VIDIOCMCAPTURE: format=%d. not supported" + " (paletteBits=$%08lx)", + vm->format, uvd->paletteBits); + } + return -EINVAL; + } + if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) { + err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1); + return -EINVAL; + } + if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) { + /* Not an error - can happen */ + } + uvd->frame[vm->frame].request = VIDEOSIZE(vm->width, vm->height); + uvd->frame[vm->frame].palette = vm->format; + + /* Mark it as ready */ + uvd->frame[vm->frame].frameState = FrameState_Ready; + + return usbvideo_NewFrame(uvd, vm->frame); + } + case VIDIOCSYNC: + { + int *frameNum = arg; + int ret; + + if (*frameNum < 0 || *frameNum >= USBVIDEO_NUMFRAMES) + return -EINVAL; + + if (uvd->debug >= 1) + info("VIDIOCSYNC: syncing to frame %d.", *frameNum); + if (uvd->flags & FLAGS_NO_DECODING) + ret = usbvideo_GetFrame(uvd, *frameNum); + else if (VALID_CALLBACK(uvd, getFrame)) { + ret = GET_CALLBACK(uvd, getFrame)(uvd, *frameNum); + if ((ret < 0) && (uvd->debug >= 1)) { + err("VIDIOCSYNC: getFrame() returned %d.", ret); + } + } else { + err("VIDIOCSYNC: getFrame is not set"); + ret = -EFAULT; + } + + /* + * The frame is in FrameState_Done_Hold state. Release it + * right now because its data is already mapped into + * the user space and it's up to the application to + * make use of it until it asks for another frame. + */ + uvd->frame[*frameNum].frameState = FrameState_Unused; + return ret; + } + case VIDIOCGFBUF: + { + struct video_buffer *vb = arg; + + memset(vb, 0, sizeof(*vb)); + return 0; + } + case VIDIOCKEY: + return 0; + + case VIDIOCCAPTURE: + return -EINVAL; + + case VIDIOCSFBUF: + + case VIDIOCGTUNER: + case VIDIOCSTUNER: + + case VIDIOCGFREQ: + case VIDIOCSFREQ: + + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + return -EINVAL; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int usbvideo_v4l_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, usbvideo_v4l_do_ioctl); +} + +/* + * usbvideo_v4l_read() + * + * This is mostly boring stuff. We simply ask for a frame and when it + * arrives copy all the video data from it into user space. There is + * no obvious need to override this method. + * + * History: + * 20-Oct-2000 Created. + * 01-Nov-2000 Added mutex (uvd->lock). + */ +static ssize_t usbvideo_v4l_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct uvd *uvd = file->private_data; + int noblock = file->f_flags & O_NONBLOCK; + int frmx = -1, i; + struct usbvideo_frame *frame; + + if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL)) + return -EFAULT; + + if (uvd->debug >= 1) + info("%s: %Zd. bytes, noblock=%d.", __FUNCTION__, count, noblock); + + mutex_lock(&uvd->lock); + + /* See if a frame is completed, then use it. */ + for(i = 0; i < USBVIDEO_NUMFRAMES; i++) { + if ((uvd->frame[i].frameState == FrameState_Done) || + (uvd->frame[i].frameState == FrameState_Done_Hold) || + (uvd->frame[i].frameState == FrameState_Error)) { + frmx = i; + break; + } + } + + /* FIXME: If we don't start a frame here then who ever does? */ + if (noblock && (frmx == -1)) { + count = -EAGAIN; + goto read_done; + } + + /* + * If no FrameState_Done, look for a FrameState_Grabbing state. + * See if a frame is in process (grabbing), then use it. + * We will need to wait until it becomes cooked, of course. + */ + if (frmx == -1) { + for(i = 0; i < USBVIDEO_NUMFRAMES; i++) { + if (uvd->frame[i].frameState == FrameState_Grabbing) { + frmx = i; + break; + } + } + } + + /* + * If no frame is active, start one. We don't care which one + * it will be, so #0 is as good as any. + * In read access mode we don't have convenience of VIDIOCMCAPTURE + * to specify the requested palette (video format) on per-frame + * basis. This means that we have to return data in -some- format + * and just hope that the client knows what to do with it. + * The default format is configured in uvd->defaultPalette field + * as one of VIDEO_PALETTE_xxx values. We stuff it into the new + * frame and initiate the frame filling process. + */ + if (frmx == -1) { + if (uvd->defaultPalette == 0) { + err("%s: No default palette; don't know what to do!", __FUNCTION__); + count = -EFAULT; + goto read_done; + } + frmx = 0; + /* + * We have no per-frame control over video size. + * Therefore we only can use whatever size was + * specified as default. + */ + uvd->frame[frmx].request = uvd->videosize; + uvd->frame[frmx].palette = uvd->defaultPalette; + uvd->frame[frmx].frameState = FrameState_Ready; + usbvideo_NewFrame(uvd, frmx); + /* Now frame 0 is supposed to start filling... */ + } + + /* + * Get a pointer to the active frame. It is either previously + * completed frame or frame in progress but not completed yet. + */ + frame = &uvd->frame[frmx]; + + /* + * Sit back & wait until the frame gets filled and postprocessed. + * If we fail to get the picture [in time] then return the error. + * In this call we specify that we want the frame to be waited for, + * postprocessed and switched into FrameState_Done_Hold state. This + * state is used to hold the frame as "fully completed" between + * subsequent partial reads of the same frame. + */ + if (frame->frameState != FrameState_Done_Hold) { + long rv = -EFAULT; + if (uvd->flags & FLAGS_NO_DECODING) + rv = usbvideo_GetFrame(uvd, frmx); + else if (VALID_CALLBACK(uvd, getFrame)) + rv = GET_CALLBACK(uvd, getFrame)(uvd, frmx); + else + err("getFrame is not set"); + if ((rv != 0) || (frame->frameState != FrameState_Done_Hold)) { + count = rv; + goto read_done; + } + } + + /* + * Copy bytes to user space. We allow for partial reads, which + * means that the user application can request read less than + * the full frame size. It is up to the application to issue + * subsequent calls until entire frame is read. + * + * First things first, make sure we don't copy more than we + * have - even if the application wants more. That would be + * a big security embarassment! + */ + if ((count + frame->seqRead_Index) > frame->seqRead_Length) + count = frame->seqRead_Length - frame->seqRead_Index; + + /* + * Copy requested amount of data to user space. We start + * copying from the position where we last left it, which + * will be zero for a new frame (not read before). + */ + if (copy_to_user(buf, frame->data + frame->seqRead_Index, count)) { + count = -EFAULT; + goto read_done; + } + + /* Update last read position */ + frame->seqRead_Index += count; + if (uvd->debug >= 1) { + err("%s: {copy} count used=%Zd, new seqRead_Index=%ld", + __FUNCTION__, count, frame->seqRead_Index); + } + + /* Finally check if the frame is done with and "release" it */ + if (frame->seqRead_Index >= frame->seqRead_Length) { + /* All data has been read */ + frame->seqRead_Index = 0; + + /* Mark it as available to be used again. */ + uvd->frame[frmx].frameState = FrameState_Unused; + if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) { + err("%s: usbvideo_NewFrame failed.", __FUNCTION__); + } + } +read_done: + mutex_unlock(&uvd->lock); + return count; +} + +/* + * Make all of the blocks of data contiguous + */ +static int usbvideo_CompressIsochronous(struct uvd *uvd, struct urb *urb) +{ + char *cdata; + int i, totlen = 0; + + for (i = 0; i < urb->number_of_packets; i++) { + int n = urb->iso_frame_desc[i].actual_length; + int st = urb->iso_frame_desc[i].status; + + cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + /* Detect and ignore errored packets */ + if (st < 0) { + if (uvd->debug >= 1) + err("Data error: packet=%d. len=%d. status=%d.", i, n, st); + uvd->stats.iso_err_count++; + continue; + } + + /* Detect and ignore empty packets */ + if (n <= 0) { + uvd->stats.iso_skip_count++; + continue; + } + totlen += n; /* Little local accounting */ + RingQueue_Enqueue(&uvd->dp, cdata, n); + } + return totlen; +} + +static void usbvideo_IsocIrq(struct urb *urb, struct pt_regs *regs) +{ + int i, ret, len; + struct uvd *uvd = urb->context; + + /* We don't want to do anything if we are about to be removed! */ + if (!CAMERA_IS_OPERATIONAL(uvd)) + return; +#if 0 + if (urb->actual_length > 0) { + info("urb=$%p status=%d. errcount=%d. length=%d.", + urb, urb->status, urb->error_count, urb->actual_length); + } else { + static int c = 0; + if (c++ % 100 == 0) + info("No Isoc data"); + } +#endif + + if (!uvd->streaming) { + if (uvd->debug >= 1) + info("Not streaming, but interrupt!"); + return; + } + + uvd->stats.urb_count++; + if (urb->actual_length <= 0) + goto urb_done_with; + + /* Copy the data received into ring queue */ + len = usbvideo_CompressIsochronous(uvd, urb); + uvd->stats.urb_length = len; + if (len <= 0) + goto urb_done_with; + + /* Here we got some data */ + uvd->stats.data_count += len; + RingQueue_WakeUpInterruptible(&uvd->dp); + +urb_done_with: + for (i = 0; i < FRAMES_PER_DESC; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + urb->status = 0; + urb->dev = uvd->dev; + ret = usb_submit_urb (urb, GFP_KERNEL); + if(ret) + err("usb_submit_urb error (%d)", ret); + return; +} + +/* + * usbvideo_StartDataPump() + * + * History: + * 27-Jan-2000 Used ibmcam->iface, ibmcam->ifaceAltActive instead + * of hardcoded values. Simplified by using for loop, + * allowed any number of URBs. + */ +static int usbvideo_StartDataPump(struct uvd *uvd) +{ + struct usb_device *dev = uvd->dev; + int i, errFlag; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, uvd); + + if (!CAMERA_IS_OPERATIONAL(uvd)) { + err("%s: Camera is not operational", __FUNCTION__); + return -EFAULT; + } + uvd->curframe = -1; + + /* Alternate interface 1 is is the biggest frame size */ + i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive); + if (i < 0) { + err("%s: usb_set_interface error", __FUNCTION__); + uvd->last_error = i; + return -EBUSY; + } + if (VALID_CALLBACK(uvd, videoStart)) + GET_CALLBACK(uvd, videoStart)(uvd); + else + err("%s: videoStart not set", __FUNCTION__); + + /* We double buffer the Iso lists */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + int j, k; + struct urb *urb = uvd->sbuf[i].urb; + urb->dev = dev; + urb->context = uvd; + urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp); + urb->interval = 1; + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = uvd->sbuf[i].data; + urb->complete = usbvideo_IsocIrq; + urb->number_of_packets = FRAMES_PER_DESC; + urb->transfer_buffer_length = uvd->iso_packet_len * FRAMES_PER_DESC; + for (j=k=0; j < FRAMES_PER_DESC; j++, k += uvd->iso_packet_len) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = uvd->iso_packet_len; + } + } + + /* Submit all URBs */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL); + if (errFlag) + err("%s: usb_submit_isoc(%d) ret %d", __FUNCTION__, i, errFlag); + } + + uvd->streaming = 1; + if (uvd->debug > 1) + info("%s: streaming=1 video_endp=$%02x", __FUNCTION__, uvd->video_endp); + return 0; +} + +/* + * usbvideo_StopDataPump() + * + * This procedure stops streaming and deallocates URBs. Then it + * activates zero-bandwidth alt. setting of the video interface. + * + * History: + * 22-Jan-2000 Corrected order of actions to work after surprise removal. + * 27-Jan-2000 Used uvd->iface, uvd->ifaceAltInactive instead of hardcoded values. + */ +static void usbvideo_StopDataPump(struct uvd *uvd) +{ + int i, j; + + if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL)) + return; + + if (uvd->debug > 1) + info("%s($%p)", __FUNCTION__, uvd); + + /* Unschedule all of the iso td's */ + for (i=0; i < USBVIDEO_NUMSBUF; i++) { + usb_kill_urb(uvd->sbuf[i].urb); + } + if (uvd->debug > 1) + info("%s: streaming=0", __FUNCTION__); + uvd->streaming = 0; + + if (!uvd->remove_pending) { + /* Invoke minidriver's magic to stop the camera */ + if (VALID_CALLBACK(uvd, videoStop)) + GET_CALLBACK(uvd, videoStop)(uvd); + else + err("%s: videoStop not set", __FUNCTION__); + + /* Set packet size to 0 */ + j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive); + if (j < 0) { + err("%s: usb_set_interface() error %d.", __FUNCTION__, j); + uvd->last_error = j; + } + } +} + +/* + * usbvideo_NewFrame() + * + * History: + * 29-Mar-00 Added copying of previous frame into the current one. + * 6-Aug-00 Added model 3 video sizes, removed redundant width, height. + */ +static int usbvideo_NewFrame(struct uvd *uvd, int framenum) +{ + struct usbvideo_frame *frame; + int n; + + if (uvd->debug > 1) + info("usbvideo_NewFrame($%p,%d.)", uvd, framenum); + + /* If we're not grabbing a frame right now and the other frame is */ + /* ready to be grabbed into, then use it instead */ + if (uvd->curframe != -1) + return 0; + + /* If necessary we adjust picture settings between frames */ + if (!uvd->settingsAdjusted) { + if (VALID_CALLBACK(uvd, adjustPicture)) + GET_CALLBACK(uvd, adjustPicture)(uvd); + uvd->settingsAdjusted = 1; + } + + n = (framenum + 1) % USBVIDEO_NUMFRAMES; + if (uvd->frame[n].frameState == FrameState_Ready) + framenum = n; + + frame = &uvd->frame[framenum]; + + frame->frameState = FrameState_Grabbing; + frame->scanstate = ScanState_Scanning; + frame->seqRead_Length = 0; /* Accumulated in xxx_parse_data() */ + frame->deinterlace = Deinterlace_None; + frame->flags = 0; /* No flags yet, up to minidriver (or us) to set them */ + uvd->curframe = framenum; + + /* + * Normally we would want to copy previous frame into the current one + * before we even start filling it with data; this allows us to stop + * filling at any moment; top portion of the frame will be new and + * bottom portion will stay as it was in previous frame. If we don't + * do that then missing chunks of video stream will result in flickering + * portions of old data whatever it was before. + * + * If we choose not to copy previous frame (to, for example, save few + * bus cycles - the frame can be pretty large!) then we have an option + * to clear the frame before using. If we experience losses in this + * mode then missing picture will be black (no flickering). + * + * Finally, if user chooses not to clean the current frame before + * filling it with data then the old data will be visible if we fail + * to refill entire frame with new data. + */ + if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) { + /* This copies previous frame into this one to mask losses */ + int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES; + memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size); + } else { + if (uvd->flags & FLAGS_CLEAN_FRAMES) { + /* This provides a "clean" frame but slows things down */ + memset(frame->data, 0, uvd->max_frame_size); + } + } + return 0; +} + +/* + * usbvideo_CollectRawData() + * + * This procedure can be used instead of 'processData' callback if you + * only want to dump the raw data from the camera into the output + * device (frame buffer). You can look at it with V4L client, but the + * image will be unwatchable. The main purpose of this code and of the + * mode FLAGS_NO_DECODING is debugging and capturing of datastreams from + * new, unknown cameras. This procedure will be automatically invoked + * instead of the specified callback handler when uvd->flags has bit + * FLAGS_NO_DECODING set. Therefore, any regular build of any driver + * based on usbvideo can use this feature at any time. + */ +static void usbvideo_CollectRawData(struct uvd *uvd, struct usbvideo_frame *frame) +{ + int n; + + assert(uvd != NULL); + assert(frame != NULL); + + /* Try to move data from queue into frame buffer */ + n = RingQueue_GetLength(&uvd->dp); + if (n > 0) { + int m; + /* See how much space we have left */ + m = uvd->max_frame_size - frame->seqRead_Length; + if (n > m) + n = m; + /* Now move that much data into frame buffer */ + RingQueue_Dequeue( + &uvd->dp, + frame->data + frame->seqRead_Length, + m); + frame->seqRead_Length += m; + } + /* See if we filled the frame */ + if (frame->seqRead_Length >= uvd->max_frame_size) { + frame->frameState = FrameState_Done; + uvd->curframe = -1; + uvd->stats.frame_num++; + } +} + +static int usbvideo_GetFrame(struct uvd *uvd, int frameNum) +{ + struct usbvideo_frame *frame = &uvd->frame[frameNum]; + + if (uvd->debug >= 2) + info("%s($%p,%d.)", __FUNCTION__, uvd, frameNum); + + switch (frame->frameState) { + case FrameState_Unused: + if (uvd->debug >= 2) + info("%s: FrameState_Unused", __FUNCTION__); + return -EINVAL; + case FrameState_Ready: + case FrameState_Grabbing: + case FrameState_Error: + { + int ntries, signalPending; + redo: + if (!CAMERA_IS_OPERATIONAL(uvd)) { + if (uvd->debug >= 2) + info("%s: Camera is not operational (1)", __FUNCTION__); + return -EIO; + } + ntries = 0; + do { + RingQueue_InterruptibleSleepOn(&uvd->dp); + signalPending = signal_pending(current); + if (!CAMERA_IS_OPERATIONAL(uvd)) { + if (uvd->debug >= 2) + info("%s: Camera is not operational (2)", __FUNCTION__); + return -EIO; + } + assert(uvd->fbuf != NULL); + if (signalPending) { + if (uvd->debug >= 2) + info("%s: Signal=$%08x", __FUNCTION__, signalPending); + if (uvd->flags & FLAGS_RETRY_VIDIOCSYNC) { + usbvideo_TestPattern(uvd, 1, 0); + uvd->curframe = -1; + uvd->stats.frame_num++; + if (uvd->debug >= 2) + info("%s: Forced test pattern screen", __FUNCTION__); + return 0; + } else { + /* Standard answer: Interrupted! */ + if (uvd->debug >= 2) + info("%s: Interrupted!", __FUNCTION__); + return -EINTR; + } + } else { + /* No signals - we just got new data in dp queue */ + if (uvd->flags & FLAGS_NO_DECODING) + usbvideo_CollectRawData(uvd, frame); + else if (VALID_CALLBACK(uvd, processData)) + GET_CALLBACK(uvd, processData)(uvd, frame); + else + err("%s: processData not set", __FUNCTION__); + } + } while (frame->frameState == FrameState_Grabbing); + if (uvd->debug >= 2) { + info("%s: Grabbing done; state=%d. (%lu. bytes)", + __FUNCTION__, frame->frameState, frame->seqRead_Length); + } + if (frame->frameState == FrameState_Error) { + int ret = usbvideo_NewFrame(uvd, frameNum); + if (ret < 0) { + err("%s: usbvideo_NewFrame() failed (%d.)", __FUNCTION__, ret); + return ret; + } + goto redo; + } + /* Note that we fall through to meet our destiny below */ + } + case FrameState_Done: + /* + * Do all necessary postprocessing of data prepared in + * "interrupt" code and the collecting code above. The + * frame gets marked as FrameState_Done by queue parsing code. + * This status means that we collected enough data and + * most likely processed it as we went through. However + * the data may need postprocessing, such as deinterlacing + * or picture adjustments implemented in software (horror!) + * + * As soon as the frame becomes "final" it gets promoted to + * FrameState_Done_Hold status where it will remain until the + * caller consumed all the video data from the frame. Then + * the empty shell of ex-frame is thrown out for dogs to eat. + * But we, worried about pets, will recycle the frame! + */ + uvd->stats.frame_num++; + if ((uvd->flags & FLAGS_NO_DECODING) == 0) { + if (VALID_CALLBACK(uvd, postProcess)) + GET_CALLBACK(uvd, postProcess)(uvd, frame); + if (frame->flags & USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST) + usbvideo_SoftwareContrastAdjustment(uvd, frame); + } + frame->frameState = FrameState_Done_Hold; + if (uvd->debug >= 2) + info("%s: Entered FrameState_Done_Hold state.", __FUNCTION__); + return 0; + + case FrameState_Done_Hold: + /* + * We stay in this state indefinitely until someone external, + * like ioctl() or read() call finishes digesting the frame + * data. Then it will mark the frame as FrameState_Unused and + * it will be released back into the wild to roam freely. + */ + if (uvd->debug >= 2) + info("%s: FrameState_Done_Hold state.", __FUNCTION__); + return 0; + } + + /* Catch-all for other cases. We shall not be here. */ + err("%s: Invalid state %d.", __FUNCTION__, frame->frameState); + frame->frameState = FrameState_Unused; + return 0; +} + +/* + * usbvideo_DeinterlaceFrame() + * + * This procedure deinterlaces the given frame. Some cameras produce + * only half of scanlines - sometimes only even lines, sometimes only + * odd lines. The deinterlacing method is stored in frame->deinterlace + * variable. + * + * Here we scan the frame vertically and replace missing scanlines with + * average between surrounding ones - before and after. If we have no + * line above then we just copy next line. Similarly, if we need to + * create a last line then preceding line is used. + */ +void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame) +{ + if ((uvd == NULL) || (frame == NULL)) + return; + + if ((frame->deinterlace == Deinterlace_FillEvenLines) || + (frame->deinterlace == Deinterlace_FillOddLines)) + { + const int v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + int i = (frame->deinterlace == Deinterlace_FillEvenLines) ? 0 : 1; + + for (; i < VIDEOSIZE_Y(frame->request); i += 2) { + const unsigned char *fs1, *fs2; + unsigned char *fd; + int ip, in, j; /* Previous and next lines */ + + /* + * Need to average lines before and after 'i'. + * If we go out of bounds seeking those lines then + * we point back to existing line. + */ + ip = i - 1; /* First, get rough numbers */ + in = i + 1; + + /* Now validate */ + if (ip < 0) + ip = in; + if (in >= VIDEOSIZE_Y(frame->request)) + in = ip; + + /* Sanity check */ + if ((ip < 0) || (in < 0) || + (ip >= VIDEOSIZE_Y(frame->request)) || + (in >= VIDEOSIZE_Y(frame->request))) + { + err("Error: ip=%d. in=%d. req.height=%ld.", + ip, in, VIDEOSIZE_Y(frame->request)); + break; + } + + /* Now we need to average lines 'ip' and 'in' to produce line 'i' */ + fs1 = frame->data + (v4l_linesize * ip); + fs2 = frame->data + (v4l_linesize * in); + fd = frame->data + (v4l_linesize * i); + + /* Average lines around destination */ + for (j=0; j < v4l_linesize; j++) { + fd[j] = (unsigned char)((((unsigned) fs1[j]) + + ((unsigned)fs2[j])) >> 1); + } + } + } + + /* Optionally display statistics on the screen */ + if (uvd->flags & FLAGS_OVERLAY_STATS) + usbvideo_OverlayStats(uvd, frame); +} + +EXPORT_SYMBOL(usbvideo_DeinterlaceFrame); + +/* + * usbvideo_SoftwareContrastAdjustment() + * + * This code adjusts the contrast of the frame, assuming RGB24 format. + * As most software image processing, this job is CPU-intensive. + * Get a camera that supports hardware adjustment! + * + * History: + * 09-Feb-2001 Created. + */ +static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd, + struct usbvideo_frame *frame) +{ + int i, j, v4l_linesize; + signed long adj; + const int ccm = 128; /* Color correction median - see below */ + + if ((uvd == NULL) || (frame == NULL)) { + err("%s: Illegal call.", __FUNCTION__); + return; + } + adj = (uvd->vpic.contrast - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/ + RESTRICT_TO_RANGE(adj, -ccm, ccm+1); + if (adj == 0) { + /* In rare case of no adjustment */ + return; + } + v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL; + for (i=0; i < VIDEOSIZE_Y(frame->request); i++) { + unsigned char *fd = frame->data + (v4l_linesize * i); + for (j=0; j < v4l_linesize; j++) { + signed long v = (signed long) fd[j]; + /* Magnify up to 2 times, reduce down to zero */ + v = 128 + ((ccm + adj) * (v - 128)) / ccm; + RESTRICT_TO_RANGE(v, 0, 0xFF); /* Must flatten tails */ + fd[j] = (unsigned char) v; + } + } +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/media/video/usbvideo/usbvideo.h new file mode 100644 index 000000000000..3cbf4fc499a3 --- /dev/null +++ b/drivers/media/video/usbvideo/usbvideo.h @@ -0,0 +1,394 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef usbvideo_h +#define usbvideo_h + +#include <linux/config.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/mutex.h> + +/* Most helpful debugging aid */ +#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__)))) + +#define USBVIDEO_REPORT_STATS 1 /* Set to 0 to block statistics on close */ + +/* Bit flags (options) */ +#define FLAGS_RETRY_VIDIOCSYNC (1 << 0) +#define FLAGS_MONOCHROME (1 << 1) +#define FLAGS_DISPLAY_HINTS (1 << 2) +#define FLAGS_OVERLAY_STATS (1 << 3) +#define FLAGS_FORCE_TESTPATTERN (1 << 4) +#define FLAGS_SEPARATE_FRAMES (1 << 5) +#define FLAGS_CLEAN_FRAMES (1 << 6) +#define FLAGS_NO_DECODING (1 << 7) + +/* Bit flags for frames (apply to the frame where they are specified) */ +#define USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST (1 << 0) + +/* Camera capabilities (maximum) */ +#define CAMERA_URB_FRAMES 32 +#define CAMERA_MAX_ISO_PACKET 1023 /* 1022 actually sent by camera */ +#define FRAMES_PER_DESC (CAMERA_URB_FRAMES) +#define FRAME_SIZE_PER_DESC (CAMERA_MAX_ISO_PACKET) + +/* This macro restricts an int variable to an inclusive range */ +#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); } + +#define V4L_BYTES_PER_PIXEL 3 /* Because we produce RGB24 */ + +/* + * Use this macro to construct constants for different video sizes. + * We have to deal with different video sizes that have to be + * configured in the device or compared against when we receive + * a data. Normally one would define a bunch of VIDEOSIZE_x_by_y + * #defines and that's the end of story. However this solution + * does not allow to convert between real pixel sizes and the + * constant (integer) value that may be used to tag a frame or + * whatever. The set of macros below constructs videosize constants + * from the pixel size and allows to reconstruct the pixel size + * from the combined value later. + */ +#define VIDEOSIZE(x,y) (((x) & 0xFFFFL) | (((y) & 0xFFFFL) << 16)) +#define VIDEOSIZE_X(vs) ((vs) & 0xFFFFL) +#define VIDEOSIZE_Y(vs) (((vs) >> 16) & 0xFFFFL) +typedef unsigned long videosize_t; + +/* + * This macro checks if the camera is still operational. The 'uvd' + * pointer must be valid, uvd->dev must be valid, we are not + * removing the device and the device has not erred on us. + */ +#define CAMERA_IS_OPERATIONAL(uvd) (\ + (uvd != NULL) && \ + ((uvd)->dev != NULL) && \ + ((uvd)->last_error == 0) && \ + (!(uvd)->remove_pending)) + +/* + * We use macros to do YUV -> RGB conversion because this is + * very important for speed and totally unimportant for size. + * + * YUV -> RGB Conversion + * --------------------- + * + * B = 1.164*(Y-16) + 2.018*(V-128) + * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128) + * R = 1.164*(Y-16) + 1.596*(U-128) + * + * If you fancy integer arithmetics (as you should), hear this: + * + * 65536*B = 76284*(Y-16) + 132252*(V-128) + * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128) + * 65536*R = 76284*(Y-16) + 104595*(U-128) + * + * Make sure the output values are within [0..255] range. + */ +#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x))) +#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \ + int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \ + mm_y = (my) - 16; \ + mm_u = (mu) - 128; \ + mm_v = (mv) - 128; \ + mm_yc= mm_y * 76284; \ + mm_b = (mm_yc + 132252*mm_v ) >> 16; \ + mm_g = (mm_yc - 53281*mm_u - 25625*mm_v ) >> 16; \ + mm_r = (mm_yc + 104595*mm_u ) >> 16; \ + mb = LIMIT_RGB(mm_b); \ + mg = LIMIT_RGB(mm_g); \ + mr = LIMIT_RGB(mm_r); \ +} + +#define RING_QUEUE_SIZE (128*1024) /* Must be a power of 2 */ +#define RING_QUEUE_ADVANCE_INDEX(rq,ind,n) (rq)->ind = ((rq)->ind + (n)) & ((rq)->length-1) +#define RING_QUEUE_DEQUEUE_BYTES(rq,n) RING_QUEUE_ADVANCE_INDEX(rq,ri,n) +#define RING_QUEUE_PEEK(rq,ofs) ((rq)->queue[((ofs) + (rq)->ri) & ((rq)->length-1)]) + +struct RingQueue { + unsigned char *queue; /* Data from the Isoc data pump */ + int length; /* How many bytes allocated for the queue */ + int wi; /* That's where we write */ + int ri; /* Read from here until you hit write index */ + wait_queue_head_t wqh; /* Processes waiting */ +}; + +enum ScanState { + ScanState_Scanning, /* Scanning for header */ + ScanState_Lines /* Parsing lines */ +}; + +/* Completion states of the data parser */ +enum ParseState { + scan_Continue, /* Just parse next item */ + scan_NextFrame, /* Frame done, send it to V4L */ + scan_Out, /* Not enough data for frame */ + scan_EndParse /* End parsing */ +}; + +enum FrameState { + FrameState_Unused, /* Unused (no MCAPTURE) */ + FrameState_Ready, /* Ready to start grabbing */ + FrameState_Grabbing, /* In the process of being grabbed into */ + FrameState_Done, /* Finished grabbing, but not been synced yet */ + FrameState_Done_Hold, /* Are syncing or reading */ + FrameState_Error, /* Something bad happened while processing */ +}; + +/* + * Some frames may contain only even or odd lines. This type + * specifies what type of deinterlacing is required. + */ +enum Deinterlace { + Deinterlace_None=0, + Deinterlace_FillOddLines, + Deinterlace_FillEvenLines +}; + +#define USBVIDEO_NUMFRAMES 2 /* How many frames we work with */ +#define USBVIDEO_NUMSBUF 2 /* How many URBs linked in a ring */ + +/* This structure represents one Isoc request - URB and buffer */ +struct usbvideo_sbuf { + char *data; + struct urb *urb; +}; + +struct usbvideo_frame { + char *data; /* Frame buffer */ + unsigned long header; /* Significant bits from the header */ + + videosize_t canvas; /* The canvas (max. image) allocated */ + videosize_t request; /* That's what the application asked for */ + unsigned short palette; /* The desired format */ + + enum FrameState frameState;/* State of grabbing */ + enum ScanState scanstate; /* State of scanning */ + enum Deinterlace deinterlace; + int flags; /* USBVIDEO_FRAME_FLAG_xxx bit flags */ + + int curline; /* Line of frame we're working on */ + + long seqRead_Length; /* Raw data length of frame */ + long seqRead_Index; /* Amount of data that has been already read */ + + void *user; /* Additional data that user may need */ +}; + +/* Statistics that can be overlaid on screen */ +struct usbvideo_statistics { + unsigned long frame_num; /* Sequential number of the frame */ + unsigned long urb_count; /* How many URBs we received so far */ + unsigned long urb_length; /* Length of last URB */ + unsigned long data_count; /* How many bytes we received */ + unsigned long header_count; /* How many frame headers we found */ + unsigned long iso_skip_count; /* How many empty ISO packets received */ + unsigned long iso_err_count; /* How many bad ISO packets received */ +}; + +struct usbvideo; + +struct uvd { + struct video_device vdev; /* Must be the first field! */ + struct usb_device *dev; + struct usbvideo *handle; /* Points back to the struct usbvideo */ + void *user_data; /* Camera-dependent data */ + int user_size; /* Size of that camera-dependent data */ + int debug; /* Debug level for usbvideo */ + unsigned char iface; /* Video interface number */ + unsigned char video_endp; + unsigned char ifaceAltActive; + unsigned char ifaceAltInactive; /* Alt settings */ + unsigned long flags; /* FLAGS_USBVIDEO_xxx */ + unsigned long paletteBits; /* Which palettes we accept? */ + unsigned short defaultPalette; /* What palette to use for read() */ + struct mutex lock; + int user; /* user count for exclusive use */ + + videosize_t videosize; /* Current setting */ + videosize_t canvas; /* This is the width,height of the V4L canvas */ + int max_frame_size; /* Bytes in one video frame */ + + int uvd_used; /* Is this structure in use? */ + int streaming; /* Are we streaming Isochronous? */ + int grabbing; /* Are we grabbing? */ + int settingsAdjusted; /* Have we adjusted contrast etc.? */ + int last_error; /* What calamity struck us? */ + + char *fbuf; /* Videodev buffer area */ + int fbuf_size; /* Videodev buffer size */ + + int curframe; + int iso_packet_len; /* Videomode-dependent, saves bus bandwidth */ + + struct RingQueue dp; /* Isoc data pump */ + struct usbvideo_frame frame[USBVIDEO_NUMFRAMES]; + struct usbvideo_sbuf sbuf[USBVIDEO_NUMSBUF]; + + volatile int remove_pending; /* If set then about to exit */ + + struct video_picture vpic, vpic_old; /* Picture settings */ + struct video_capability vcap; /* Video capabilities */ + struct video_channel vchan; /* May be used for tuner support */ + struct usbvideo_statistics stats; + char videoName[32]; /* Holds name like "video7" */ +}; + +/* + * usbvideo callbacks (virtual methods). They are set when usbvideo + * services are registered. All of these default to NULL, except those + * that default to usbvideo-provided methods. + */ +struct usbvideo_cb { + int (*probe)(struct usb_interface *, const struct usb_device_id *); + void (*userFree)(struct uvd *); + void (*disconnect)(struct usb_interface *); + int (*setupOnOpen)(struct uvd *); + void (*videoStart)(struct uvd *); + void (*videoStop)(struct uvd *); + void (*processData)(struct uvd *, struct usbvideo_frame *); + void (*postProcess)(struct uvd *, struct usbvideo_frame *); + void (*adjustPicture)(struct uvd *); + int (*getFPS)(struct uvd *); + int (*overlayHook)(struct uvd *, struct usbvideo_frame *); + int (*getFrame)(struct uvd *, int); + int (*startDataPump)(struct uvd *uvd); + void (*stopDataPump)(struct uvd *uvd); + int (*setVideoMode)(struct uvd *uvd, struct video_window *vw); +}; + +struct usbvideo { + int num_cameras; /* As allocated */ + struct usb_driver usbdrv; /* Interface to the USB stack */ + char drvName[80]; /* Driver name */ + struct mutex lock; /* Mutex protecting camera structures */ + struct usbvideo_cb cb; /* Table of callbacks (virtual methods) */ + struct video_device vdt; /* Video device template */ + struct uvd *cam; /* Array of camera structures */ + struct module *md_module; /* Minidriver module */ +}; + + +/* + * This macro retrieves callback address from the struct uvd object. + * No validity checks are done here, so be sure to check the + * callback beforehand with VALID_CALLBACK. + */ +#define GET_CALLBACK(uvd,cbName) ((uvd)->handle->cb.cbName) + +/* + * This macro returns either callback pointer or NULL. This is safe + * macro, meaning that most of components of data structures involved + * may be NULL - this only results in NULL being returned. You may + * wish to use this macro to make sure that the callback is callable. + * However keep in mind that those checks take time. + */ +#define VALID_CALLBACK(uvd,cbName) ((((uvd) != NULL) && \ + ((uvd)->handle != NULL)) ? GET_CALLBACK(uvd,cbName) : NULL) + +int RingQueue_Dequeue(struct RingQueue *rq, unsigned char *dst, int len); +int RingQueue_Enqueue(struct RingQueue *rq, const unsigned char *cdata, int n); +void RingQueue_WakeUpInterruptible(struct RingQueue *rq); +void RingQueue_Flush(struct RingQueue *rq); + +static inline int RingQueue_GetLength(const struct RingQueue *rq) +{ + return (rq->wi - rq->ri + rq->length) & (rq->length-1); +} + +static inline int RingQueue_GetFreeSpace(const struct RingQueue *rq) +{ + return rq->length - RingQueue_GetLength(rq); +} + +void usbvideo_DrawLine( + struct usbvideo_frame *frame, + int x1, int y1, + int x2, int y2, + unsigned char cr, unsigned char cg, unsigned char cb); +void usbvideo_HexDump(const unsigned char *data, int len); +void usbvideo_SayAndWait(const char *what); +void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode); + +/* Memory allocation routines */ +unsigned long usbvideo_kvirt_to_pa(unsigned long adr); + +int usbvideo_register( + struct usbvideo **pCams, + const int num_cams, + const int num_extra, + const char *driverName, + const struct usbvideo_cb *cbTable, + struct module *md, + const struct usb_device_id *id_table); +struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams); +int usbvideo_RegisterVideoDevice(struct uvd *uvd); +void usbvideo_Deregister(struct usbvideo **uvt); + +int usbvideo_v4l_initialize(struct video_device *dev); + +void usbvideo_DeinterlaceFrame(struct uvd *uvd, struct usbvideo_frame *frame); + +/* + * This code performs bounds checking - use it when working with + * new formats, or else you may get oopses all over the place. + * If pixel falls out of bounds then it gets shoved back (as close + * to place of offence as possible) and is painted bright red. + * + * There are two important concepts: frame width, height and + * V4L canvas width, height. The former is the area requested by + * the application -for this very frame-. The latter is the largest + * possible frame that we can serve (we advertise that via V4L ioctl). + * The frame data is expected to be formatted as lines of length + * VIDEOSIZE_X(fr->request), total VIDEOSIZE_Y(frame->request) lines. + */ +static inline void RGB24_PUTPIXEL( + struct usbvideo_frame *fr, + int ix, int iy, + unsigned char vr, + unsigned char vg, + unsigned char vb) +{ + register unsigned char *pf; + int limiter = 0, mx, my; + mx = ix; + my = iy; + if (mx < 0) { + mx=0; + limiter++; + } else if (mx >= VIDEOSIZE_X((fr)->request)) { + mx= VIDEOSIZE_X((fr)->request) - 1; + limiter++; + } + if (my < 0) { + my = 0; + limiter++; + } else if (my >= VIDEOSIZE_Y((fr)->request)) { + my = VIDEOSIZE_Y((fr)->request) - 1; + limiter++; + } + pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*VIDEOSIZE_X((fr)->request) + (ix)); + if (limiter) { + *pf++ = 0; + *pf++ = 0; + *pf++ = 0xFF; + } else { + *pf++ = (vb); + *pf++ = (vg); + *pf++ = (vr); + } +} + +#endif /* usbvideo_h */ diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c new file mode 100644 index 000000000000..90d48e8510ba --- /dev/null +++ b/drivers/media/video/usbvideo/vicam.c @@ -0,0 +1,1411 @@ +/* + * USB ViCam WebCam driver + * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), + * Christopher L Cheney (ccheney@cheney.cx), + * Pavel Machek (pavel@suse.cz), + * John Tyner (jtyner@cs.ucr.edu), + * Monroe Williams (monroe@pobox.com) + * + * Supports 3COM HomeConnect PC Digital WebCam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * This source code is based heavily on the CPiA webcam driver which was + * written by Peter Pregler, Scott J. Bertin and Johannes Erdfelt + * + * Portions of this code were also copied from usbvideo.c + * + * Special thanks to the the whole team at Sourceforge for help making + * this driver become a reality. Notably: + * Andy Armstrong who reverse engineered the color encoding and + * Pavel Machek and Chris Cheney who worked on reverse engineering the + * camera controls and wrote the first generation driver. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/proc_fs.h> +#include <linux/mutex.h> +#include "usbvideo.h" + +// #define VICAM_DEBUG + +#ifdef VICAM_DEBUG +#define ADBG(lineno,fmt,args...) printk(fmt, jiffies, __FUNCTION__, lineno, ##args) +#define DBG(fmt,args...) ADBG((__LINE__),KERN_DEBUG __FILE__"(%ld):%s (%d):"fmt,##args) +#else +#define DBG(fmn,args...) do {} while(0) +#endif + +#define DRIVER_AUTHOR "Joe Burks, jburks@wavicle.org" +#define DRIVER_DESC "ViCam WebCam Driver" + +/* Define these values to match your device */ +#define USB_VICAM_VENDOR_ID 0x04c1 +#define USB_VICAM_PRODUCT_ID 0x009d + +#define VICAM_BYTES_PER_PIXEL 3 +#define VICAM_MAX_READ_SIZE (512*242+128) +#define VICAM_MAX_FRAME_SIZE (VICAM_BYTES_PER_PIXEL*320*240) +#define VICAM_FRAMES 2 + +#define VICAM_HEADER_SIZE 64 + +#define clamp( x, l, h ) max_t( __typeof__( x ), \ + ( l ), \ + min_t( __typeof__( x ), \ + ( h ), \ + ( x ) ) ) + +/* Not sure what all the bytes in these char + * arrays do, but they're necessary to make + * the camera work. + */ + +static unsigned char setup1[] = { + 0xB6, 0xC3, 0x1F, 0x00, 0x02, 0x64, 0xE7, 0x67, + 0xFD, 0xFF, 0x0E, 0xC0, 0xE7, 0x09, 0xDE, 0x00, + 0x8E, 0x00, 0xC0, 0x09, 0x40, 0x03, 0xC0, 0x17, + 0x44, 0x03, 0x4B, 0xAF, 0xC0, 0x07, 0x00, 0x00, + 0x4B, 0xAF, 0x97, 0xCF, 0x00, 0x00 +}; + +static unsigned char setup2[] = { + 0xB6, 0xC3, 0x03, 0x00, 0x03, 0x64, 0x18, 0x00, + 0x00, 0x00 +}; + +static unsigned char setup3[] = { + 0xB6, 0xC3, 0x01, 0x00, 0x06, 0x64, 0x00, 0x00 +}; + +static unsigned char setup4[] = { + 0xB6, 0xC3, 0x8F, 0x06, 0x02, 0x64, 0xE7, 0x07, + 0x00, 0x00, 0x08, 0xC0, 0xE7, 0x07, 0x00, 0x00, + 0x3E, 0xC0, 0xE7, 0x07, 0x54, 0x01, 0xAA, 0x00, + 0xE7, 0x07, 0xC8, 0x05, 0xB6, 0x00, 0xE7, 0x07, + 0x42, 0x01, 0xD2, 0x00, 0xE7, 0x07, 0x7C, 0x00, + 0x16, 0x00, 0xE7, 0x07, 0x56, 0x00, 0x18, 0x00, + 0xE7, 0x07, 0x06, 0x00, 0x92, 0xC0, 0xE7, 0x07, + 0x00, 0x00, 0x1E, 0xC0, 0xE7, 0x07, 0xFF, 0xFF, + 0x22, 0xC0, 0xE7, 0x07, 0x04, 0x00, 0x24, 0xC0, + 0xE7, 0x07, 0xEC, 0x27, 0x28, 0xC0, 0xE7, 0x07, + 0x16, 0x01, 0x8E, 0x00, 0xE7, 0x87, 0x01, 0x00, + 0x0E, 0xC0, 0x97, 0xCF, 0xD7, 0x09, 0x00, 0xC0, + 0xE7, 0x77, 0x01, 0x00, 0x92, 0xC0, 0x09, 0xC1, + 0xE7, 0x09, 0xFE, 0x05, 0x24, 0x01, 0xE7, 0x09, + 0x04, 0x06, 0x26, 0x01, 0xE7, 0x07, 0x07, 0x00, + 0x92, 0xC0, 0xE7, 0x05, 0x00, 0xC0, 0xC0, 0xDF, + 0x97, 0xCF, 0x17, 0x00, 0x57, 0x00, 0x17, 0x02, + 0xD7, 0x09, 0x00, 0xC0, 0xE7, 0x77, 0x01, 0x00, + 0x92, 0xC0, 0x0A, 0xC1, 0xE7, 0x57, 0xFF, 0xFF, + 0xFA, 0x05, 0x0D, 0xC0, 0xE7, 0x57, 0x00, 0x00, + 0xFA, 0x05, 0x0F, 0xC0, 0x9F, 0xAF, 0xC6, 0x00, + 0xE7, 0x05, 0x00, 0xC0, 0xC8, 0x05, 0xC1, 0x05, + 0xC0, 0x05, 0xC0, 0xDF, 0x97, 0xCF, 0x27, 0xDA, + 0xFA, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x0B, 0x06, + 0x73, 0xCF, 0x9F, 0xAF, 0x78, 0x01, 0x9F, 0xAF, + 0x1A, 0x03, 0x6E, 0xCF, 0xE7, 0x09, 0xFC, 0x05, + 0x24, 0x01, 0xE7, 0x09, 0x02, 0x06, 0x26, 0x01, + 0xE7, 0x07, 0x07, 0x00, 0x92, 0xC0, 0xE7, 0x09, + 0xFC, 0x05, 0xFE, 0x05, 0xE7, 0x09, 0x02, 0x06, + 0x04, 0x06, 0xE7, 0x09, 0x00, 0x06, 0xFC, 0x05, + 0xE7, 0x09, 0xFE, 0x05, 0x00, 0x06, 0x27, 0xDA, + 0xFA, 0x05, 0xE7, 0x57, 0x01, 0x00, 0xFA, 0x05, + 0x02, 0xCA, 0x04, 0xC0, 0x97, 0xCF, 0x9F, 0xAF, + 0x66, 0x05, 0x97, 0xCF, 0xE7, 0x07, 0x40, 0x00, + 0x02, 0x06, 0xC8, 0x09, 0xFC, 0x05, 0x9F, 0xAF, + 0xDA, 0x02, 0x97, 0xCF, 0xCF, 0x17, 0x02, 0x00, + 0xEF, 0x57, 0x81, 0x00, 0x09, 0x06, 0x9F, 0xA0, + 0xB6, 0x01, 0xEF, 0x57, 0x80, 0x00, 0x09, 0x06, + 0x9F, 0xA0, 0x40, 0x02, 0xEF, 0x57, 0x01, 0x00, + 0x0B, 0x06, 0x9F, 0xA0, 0x46, 0x03, 0xE7, 0x07, + 0x01, 0x00, 0x0A, 0xC0, 0x46, 0xAF, 0x47, 0xAF, + 0x9F, 0xAF, 0x40, 0x02, 0xE7, 0x07, 0x2E, 0x00, + 0x0A, 0xC0, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06, + 0x97, 0xCF, 0x00, 0x0E, 0x01, 0x00, 0xC0, 0x57, + 0x51, 0x00, 0x9F, 0xC0, 0x9E, 0x02, 0xC0, 0x57, + 0x50, 0x00, 0x20, 0xC0, 0xC0, 0x57, 0x55, 0x00, + 0x12, 0xC0, 0xC0, 0x57, 0x56, 0x00, 0x9F, 0xC0, + 0x72, 0x02, 0x9F, 0xCF, 0xD6, 0x02, 0xC1, 0x0B, + 0x08, 0x06, 0x01, 0xD0, 0x6F, 0x90, 0x08, 0x06, + 0xC0, 0x07, 0x08, 0x00, 0xC1, 0x0B, 0x08, 0x06, + 0x9F, 0xAF, 0x28, 0x05, 0x97, 0xCF, 0x2F, 0x0E, + 0x02, 0x00, 0x08, 0x06, 0xC0, 0x07, 0x08, 0x00, + 0xC1, 0x0B, 0x08, 0x06, 0x9F, 0xAF, 0x28, 0x05, + 0x9F, 0xCF, 0xD6, 0x02, 0x2F, 0x0E, 0x02, 0x00, + 0x09, 0x06, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06, + 0x9F, 0xCF, 0xD6, 0x02, 0xEF, 0x67, 0x7F, 0xFF, + 0x09, 0x06, 0xE7, 0x67, 0xFF, 0xFD, 0x22, 0xC0, + 0xE7, 0x67, 0xEF, 0xFF, 0x24, 0xC0, 0xE7, 0x87, + 0x10, 0x00, 0x28, 0xC0, 0x9F, 0xAF, 0xB8, 0x05, + 0xE7, 0x87, 0xE0, 0x21, 0x24, 0xC0, 0x9F, 0xAF, + 0xA8, 0x05, 0xE7, 0x87, 0x08, 0x00, 0x24, 0xC0, + 0xE7, 0x67, 0xDF, 0xFF, 0x24, 0xC0, 0xC8, 0x07, + 0x0A, 0x00, 0xC0, 0x07, 0x00, 0x00, 0xC1, 0x07, + 0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0x9F, 0xAF, + 0xB8, 0x05, 0xC0, 0x07, 0x9E, 0x00, 0x9F, 0xAF, + 0x44, 0x05, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, + 0xC0, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01, + 0x24, 0xC0, 0xC0, 0x77, 0x00, 0x02, 0x0F, 0xC1, + 0xE7, 0x67, 0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x67, + 0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x08, 0x00, + 0x24, 0xC0, 0x08, 0xDA, 0x5E, 0xC1, 0xEF, 0x07, + 0x80, 0x00, 0x09, 0x06, 0x97, 0xCF, 0xEF, 0x07, + 0x01, 0x00, 0x0A, 0x06, 0x97, 0xCF, 0xEF, 0x07, + 0x00, 0x00, 0x0B, 0x06, 0xEF, 0x07, 0x00, 0x00, + 0x0A, 0x06, 0xEF, 0x67, 0x7F, 0xFF, 0x09, 0x06, + 0xEF, 0x07, 0x00, 0x00, 0x0D, 0x06, 0xE7, 0x67, + 0xEF, 0xFF, 0x28, 0xC0, 0xE7, 0x67, 0x17, 0xD8, + 0x24, 0xC0, 0xE7, 0x07, 0x00, 0x00, 0x1E, 0xC0, + 0xE7, 0x07, 0xFF, 0xFF, 0x22, 0xC0, 0x97, 0xCF, + 0xC8, 0x07, 0x0E, 0x06, 0x9F, 0xAF, 0xDA, 0x02, + 0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07, + 0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0x0E, 0x06, + 0xF4, 0x05, 0xE7, 0x07, 0xD6, 0x02, 0xF8, 0x05, + 0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80, + 0x50, 0xAF, 0x97, 0xCF, 0x2F, 0x0C, 0x02, 0x00, + 0x07, 0x06, 0x2F, 0x0C, 0x04, 0x00, 0x06, 0x06, + 0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07, + 0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0xE2, 0x05, + 0xF4, 0x05, 0xE7, 0x07, 0xCE, 0x02, 0xF8, 0x05, + 0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80, + 0x51, 0xAF, 0x97, 0xCF, 0x9F, 0xAF, 0x66, 0x04, + 0x9F, 0xAF, 0x1A, 0x03, 0x59, 0xAF, 0x97, 0xCF, + 0xC0, 0x07, 0x0E, 0x00, 0xC1, 0x0B, 0x0C, 0x06, + 0x41, 0xD1, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, + 0x3C, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0x68, 0x00, + 0xC0, 0x07, 0x3B, 0x00, 0x9F, 0xAF, 0x44, 0x05, + 0x6F, 0x00, 0x0C, 0x06, 0x68, 0x00, 0xE0, 0x07, + 0x04, 0x01, 0xE8, 0x0B, 0x0A, 0x06, 0xE8, 0x07, + 0x00, 0x00, 0xE0, 0x07, 0x00, 0x02, 0xE0, 0x07, + 0xEC, 0x01, 0xE0, 0x07, 0xFC, 0xFF, 0x97, 0xCF, + 0xE7, 0x07, 0xFF, 0xFF, 0xFA, 0x05, 0xEF, 0x07, + 0x00, 0x00, 0x0B, 0x06, 0xE7, 0x07, 0x0E, 0x06, + 0x24, 0x01, 0xE7, 0x07, 0x0E, 0x06, 0xFE, 0x05, + 0xE7, 0x07, 0x40, 0x00, 0x26, 0x01, 0xE7, 0x07, + 0x40, 0x00, 0x04, 0x06, 0xE7, 0x07, 0x07, 0x00, + 0x92, 0xC0, 0x97, 0xCF, 0xEF, 0x07, 0x02, 0x00, + 0x0B, 0x06, 0x9F, 0xAF, 0x78, 0x01, 0xEF, 0x77, + 0x80, 0x00, 0x07, 0x06, 0x9F, 0xC0, 0x14, 0x04, + 0xEF, 0x77, 0x01, 0x00, 0x07, 0x06, 0x37, 0xC0, + 0xEF, 0x77, 0x01, 0x00, 0x0D, 0x06, 0x0F, 0xC1, + 0xEF, 0x07, 0x01, 0x00, 0x0D, 0x06, 0xC0, 0x07, + 0x02, 0x00, 0xC1, 0x07, 0x30, 0x00, 0x9F, 0xAF, + 0x28, 0x05, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07, + 0x02, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07, + 0xFF, 0x4F, 0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07, + 0x38, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x77, + 0x03, 0x00, 0x02, 0xC1, 0x08, 0xDA, 0x75, 0xC1, + 0xC1, 0x77, 0x01, 0x00, 0x0A, 0xC1, 0xC0, 0x07, + 0x01, 0x00, 0xC1, 0x07, 0x02, 0x00, 0x9F, 0xAF, + 0x28, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x06, 0x06, + 0x2C, 0xCF, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07, + 0x04, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xEF, 0x07, + 0x00, 0x00, 0x06, 0x06, 0x22, 0xCF, 0xEF, 0x07, + 0x00, 0x00, 0x0D, 0x06, 0xEF, 0x57, 0x01, 0x00, + 0x06, 0x06, 0x1B, 0xC0, 0xC0, 0x07, 0x01, 0x00, + 0xC1, 0x07, 0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05, + 0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07, 0x30, 0x00, + 0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07, 0xFF, 0x4F, + 0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07, 0x38, 0x00, + 0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x67, 0x03, 0x00, + 0xC1, 0x57, 0x03, 0x00, 0x02, 0xC0, 0x08, 0xDA, + 0x73, 0xC1, 0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07, + 0x12, 0x00, 0xEF, 0x57, 0x00, 0x00, 0x06, 0x06, + 0x02, 0xC0, 0xC1, 0x07, 0x23, 0x00, 0x9F, 0xAF, + 0x28, 0x05, 0xC0, 0x07, 0x14, 0x00, 0xC1, 0x0B, + 0xEA, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, + 0x3E, 0x00, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x09, + 0xE4, 0x05, 0xFA, 0x05, 0x27, 0xD8, 0xFA, 0x05, + 0xE7, 0x07, 0x0E, 0x06, 0xFC, 0x05, 0xE7, 0x07, + 0x4E, 0x06, 0x00, 0x06, 0xE7, 0x07, 0x40, 0x00, + 0x02, 0x06, 0x9F, 0xAF, 0x66, 0x05, 0x9F, 0xAF, + 0xC6, 0x00, 0x97, 0xCF, 0xC1, 0x0B, 0xE2, 0x05, + 0x41, 0xD0, 0x01, 0xD2, 0xC1, 0x17, 0x23, 0x00, + 0x9F, 0xAF, 0xDC, 0x04, 0xC0, 0x07, 0x04, 0x00, + 0xC1, 0x0B, 0xE3, 0x05, 0x9F, 0xAF, 0x28, 0x05, + 0xC0, 0x07, 0x06, 0x00, 0xC1, 0x09, 0xE6, 0x05, + 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x07, 0x00, + 0xC1, 0x09, 0xE6, 0x05, 0xC1, 0xD1, 0x9F, 0xAF, + 0x28, 0x05, 0xC0, 0x07, 0x0B, 0x00, 0xC1, 0x09, + 0xE8, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, + 0x0C, 0x00, 0xC1, 0x09, 0xE8, 0x05, 0xC1, 0xD1, + 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0D, 0x00, + 0xC1, 0x07, 0x09, 0x00, 0x9F, 0xAF, 0x28, 0x05, + 0xC0, 0x07, 0x03, 0x00, 0xC1, 0x07, 0x32, 0x00, + 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0F, 0x00, + 0xC1, 0x07, 0x00, 0x00, 0x9F, 0xAF, 0x28, 0x05, + 0x97, 0xCF, 0xE7, 0x67, 0xFF, 0xD9, 0x24, 0xC0, + 0xC8, 0x07, 0x0A, 0x00, 0x40, 0x00, 0xC0, 0x67, + 0x00, 0x02, 0x27, 0x80, 0x24, 0xC0, 0xE7, 0x87, + 0x00, 0x04, 0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xF9, + 0x24, 0xC0, 0x01, 0xD2, 0x08, 0xDA, 0x72, 0xC1, + 0xE7, 0x87, 0x00, 0x20, 0x24, 0xC0, 0x97, 0xCF, + 0x27, 0x00, 0x1E, 0xC0, 0xE7, 0x87, 0xFF, 0x00, + 0x22, 0xC0, 0xE7, 0x67, 0x7F, 0xFF, 0x24, 0xC0, + 0xE7, 0x87, 0x80, 0x00, 0x24, 0xC0, 0xE7, 0x87, + 0x80, 0x00, 0x24, 0xC0, 0x97, 0xCF, 0x9F, 0xAF, + 0x0A, 0x05, 0x67, 0x00, 0x1E, 0xC0, 0xE7, 0x67, + 0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00, + 0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, + 0x97, 0xCF, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x67, + 0x00, 0xFF, 0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, + 0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, + 0xC1, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01, + 0x24, 0xC0, 0x97, 0xCF, 0xC0, 0x07, 0x40, 0x00, + 0xC8, 0x09, 0xFC, 0x05, 0xE7, 0x67, 0x00, 0xFF, + 0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, + 0xE7, 0x67, 0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x67, + 0xBF, 0xFF, 0x24, 0xC0, 0x00, 0xDA, 0xE8, 0x09, + 0x20, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, + 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, 0x00, 0xDA, + 0xE8, 0x09, 0x20, 0xC0, 0x6D, 0xC1, 0xE7, 0x87, + 0x00, 0x01, 0x24, 0xC0, 0x97, 0xCF, 0xE7, 0x07, + 0x32, 0x00, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80, + 0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0xE7, 0x07, + 0x20, 0x4E, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80, + 0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0x09, 0x02, + 0x19, 0x00, 0x01, 0x01, 0x00, 0x80, 0x96, 0x09, + 0x04, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x05, 0x81, 0x02, 0x40, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static unsigned char setup5[] = { + 0xB6, 0xC3, 0x2F, 0x01, 0x03, 0x64, 0x0E, 0x00, + 0x14, 0x00, 0x1A, 0x00, 0x20, 0x00, 0x26, 0x00, + 0x4A, 0x00, 0x64, 0x00, 0x6A, 0x00, 0x92, 0x00, + 0x9A, 0x00, 0xA0, 0x00, 0xB2, 0x00, 0xB8, 0x00, + 0xBE, 0x00, 0xC2, 0x00, 0xC8, 0x00, 0xCE, 0x00, + 0xDC, 0x00, 0xDA, 0x00, 0xE2, 0x00, 0xE0, 0x00, + 0xE8, 0x00, 0xE6, 0x00, 0xEE, 0x00, 0xEC, 0x00, + 0xF2, 0x00, 0xF8, 0x00, 0x02, 0x01, 0x0A, 0x01, + 0x0E, 0x01, 0x12, 0x01, 0x1E, 0x01, 0x22, 0x01, + 0x28, 0x01, 0x2C, 0x01, 0x32, 0x01, 0x36, 0x01, + 0x44, 0x01, 0x50, 0x01, 0x5E, 0x01, 0x72, 0x01, + 0x76, 0x01, 0x7A, 0x01, 0x80, 0x01, 0x88, 0x01, + 0x8C, 0x01, 0x94, 0x01, 0x9C, 0x01, 0xA0, 0x01, + 0xA4, 0x01, 0xAA, 0x01, 0xB0, 0x01, 0xB4, 0x01, + 0xBA, 0x01, 0xD0, 0x01, 0xDA, 0x01, 0xF6, 0x01, + 0xFA, 0x01, 0x02, 0x02, 0x34, 0x02, 0x3C, 0x02, + 0x44, 0x02, 0x4A, 0x02, 0x50, 0x02, 0x56, 0x02, + 0x74, 0x02, 0x78, 0x02, 0x7E, 0x02, 0x84, 0x02, + 0x8A, 0x02, 0x88, 0x02, 0x90, 0x02, 0x8E, 0x02, + 0x94, 0x02, 0xA2, 0x02, 0xA8, 0x02, 0xAE, 0x02, + 0xB4, 0x02, 0xBA, 0x02, 0xB8, 0x02, 0xC0, 0x02, + 0xBE, 0x02, 0xC4, 0x02, 0xD0, 0x02, 0xD4, 0x02, + 0xE0, 0x02, 0xE6, 0x02, 0xEE, 0x02, 0xF8, 0x02, + 0xFC, 0x02, 0x06, 0x03, 0x1E, 0x03, 0x24, 0x03, + 0x28, 0x03, 0x30, 0x03, 0x2E, 0x03, 0x3C, 0x03, + 0x4A, 0x03, 0x4E, 0x03, 0x54, 0x03, 0x58, 0x03, + 0x5E, 0x03, 0x66, 0x03, 0x6E, 0x03, 0x7A, 0x03, + 0x86, 0x03, 0x8E, 0x03, 0x96, 0x03, 0xB2, 0x03, + 0xB8, 0x03, 0xC6, 0x03, 0xCC, 0x03, 0xD4, 0x03, + 0xDA, 0x03, 0xE8, 0x03, 0xF4, 0x03, 0xFC, 0x03, + 0x04, 0x04, 0x20, 0x04, 0x2A, 0x04, 0x32, 0x04, + 0x36, 0x04, 0x3E, 0x04, 0x44, 0x04, 0x42, 0x04, + 0x48, 0x04, 0x4E, 0x04, 0x4C, 0x04, 0x54, 0x04, + 0x52, 0x04, 0x5A, 0x04, 0x5E, 0x04, 0x62, 0x04, + 0x68, 0x04, 0x74, 0x04, 0x7C, 0x04, 0x80, 0x04, + 0x88, 0x04, 0x8C, 0x04, 0x94, 0x04, 0x9A, 0x04, + 0xA2, 0x04, 0xA6, 0x04, 0xAE, 0x04, 0xB4, 0x04, + 0xC0, 0x04, 0xCC, 0x04, 0xD8, 0x04, 0x2A, 0x05, + 0x46, 0x05, 0x6C, 0x05, 0x00, 0x00 +}; + +/* rvmalloc / rvfree copied from usbvideo.c + * + * Not sure why these are not yet non-statics which I can reference through + * usbvideo.h the same as it is in 2.4.20. I bet this will get fixed sometime + * in the future. + * +*/ +static void *rvmalloc(unsigned long size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void rvfree(void *mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + +struct vicam_camera { + u16 shutter_speed; // capture shutter speed + u16 gain; // capture gain + + u8 *raw_image; // raw data captured from the camera + u8 *framebuf; // processed data in RGB24 format + u8 *cntrlbuf; // area used to send control msgs + + struct video_device vdev; // v4l video device + struct usb_device *udev; // usb device + + /* guard against simultaneous accesses to the camera */ + struct mutex cam_lock; + + int is_initialized; + u8 open_count; + u8 bulkEndpoint; + int needsDummyRead; + +#if defined(CONFIG_VIDEO_PROC_FS) + struct proc_dir_entry *proc_dir; +#endif + +}; + +static int vicam_probe( struct usb_interface *intf, const struct usb_device_id *id); +static void vicam_disconnect(struct usb_interface *intf); +static void read_frame(struct vicam_camera *cam, int framenum); +static void vicam_decode_color(const u8 *, u8 *); + +static int __send_control_msg(struct vicam_camera *cam, + u8 request, + u16 value, + u16 index, + unsigned char *cp, + u16 size) +{ + int status; + + /* cp must be memory that has been allocated by kmalloc */ + + status = usb_control_msg(cam->udev, + usb_sndctrlpipe(cam->udev, 0), + request, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, value, index, + cp, size, 1000); + + status = min(status, 0); + + if (status < 0) { + printk(KERN_INFO "Failed sending control message, error %d.\n", + status); + } + + return status; +} + +static int send_control_msg(struct vicam_camera *cam, + u8 request, + u16 value, + u16 index, + unsigned char *cp, + u16 size) +{ + int status = -ENODEV; + mutex_lock(&cam->cam_lock); + if (cam->udev) { + status = __send_control_msg(cam, request, value, + index, cp, size); + } + mutex_unlock(&cam->cam_lock); + return status; +} +static int +initialize_camera(struct vicam_camera *cam) +{ + const struct { + u8 *data; + u32 size; + } firmware[] = { + { .data = setup1, .size = sizeof(setup1) }, + { .data = setup2, .size = sizeof(setup2) }, + { .data = setup3, .size = sizeof(setup3) }, + { .data = setup4, .size = sizeof(setup4) }, + { .data = setup5, .size = sizeof(setup5) }, + { .data = setup3, .size = sizeof(setup3) }, + { .data = NULL, .size = 0 } + }; + + int err, i; + + for (i = 0, err = 0; firmware[i].data && !err; i++) { + memcpy(cam->cntrlbuf, firmware[i].data, firmware[i].size); + + err = send_control_msg(cam, 0xff, 0, 0, + cam->cntrlbuf, firmware[i].size); + } + + return err; +} + +static int +set_camera_power(struct vicam_camera *cam, int state) +{ + int status; + + if ((status = send_control_msg(cam, 0x50, state, 0, NULL, 0)) < 0) + return status; + + if (state) { + send_control_msg(cam, 0x55, 1, 0, NULL, 0); + } + + return 0; +} + +static int +vicam_ioctl(struct inode *inode, struct file *file, unsigned int ioctlnr, unsigned long arg) +{ + void __user *user_arg = (void __user *)arg; + struct vicam_camera *cam = file->private_data; + int retval = 0; + + if (!cam) + return -ENODEV; + + switch (ioctlnr) { + /* query capabilities */ + case VIDIOCGCAP: + { + struct video_capability b; + + DBG("VIDIOCGCAP\n"); + memset(&b, 0, sizeof(b)); + strcpy(b.name, "ViCam-based Camera"); + b.type = VID_TYPE_CAPTURE; + b.channels = 1; + b.audios = 0; + b.maxwidth = 320; /* VIDEOSIZE_CIF */ + b.maxheight = 240; + b.minwidth = 320; /* VIDEOSIZE_48_48 */ + b.minheight = 240; + + if (copy_to_user(user_arg, &b, sizeof(b))) + retval = -EFAULT; + + break; + } + /* get/set video source - we are a camera and nothing else */ + case VIDIOCGCHAN: + { + struct video_channel v; + + DBG("VIDIOCGCHAN\n"); + if (copy_from_user(&v, user_arg, sizeof(v))) { + retval = -EFAULT; + break; + } + if (v.channel != 0) { + retval = -EINVAL; + break; + } + + v.channel = 0; + strcpy(v.name, "Camera"); + v.tuners = 0; + v.flags = 0; + v.type = VIDEO_TYPE_CAMERA; + v.norm = 0; + + if (copy_to_user(user_arg, &v, sizeof(v))) + retval = -EFAULT; + break; + } + + case VIDIOCSCHAN: + { + int v; + + if (copy_from_user(&v, user_arg, sizeof(v))) + retval = -EFAULT; + DBG("VIDIOCSCHAN %d\n", v); + + if (retval == 0 && v != 0) + retval = -EINVAL; + + break; + } + + /* image properties */ + case VIDIOCGPICT: + { + struct video_picture vp; + DBG("VIDIOCGPICT\n"); + memset(&vp, 0, sizeof (struct video_picture)); + vp.brightness = cam->gain << 8; + vp.depth = 24; + vp.palette = VIDEO_PALETTE_RGB24; + if (copy_to_user(user_arg, &vp, sizeof (struct video_picture))) + retval = -EFAULT; + break; + } + + case VIDIOCSPICT: + { + struct video_picture vp; + + if (copy_from_user(&vp, user_arg, sizeof(vp))) { + retval = -EFAULT; + break; + } + + DBG("VIDIOCSPICT depth = %d, pal = %d\n", vp.depth, + vp.palette); + + cam->gain = vp.brightness >> 8; + + if (vp.depth != 24 + || vp.palette != VIDEO_PALETTE_RGB24) + retval = -EINVAL; + + break; + } + + /* get/set capture window */ + case VIDIOCGWIN: + { + struct video_window vw; + vw.x = 0; + vw.y = 0; + vw.width = 320; + vw.height = 240; + vw.chromakey = 0; + vw.flags = 0; + vw.clips = NULL; + vw.clipcount = 0; + + DBG("VIDIOCGWIN\n"); + + if (copy_to_user(user_arg, (void *)&vw, sizeof(vw))) + retval = -EFAULT; + + // I'm not sure what the deal with a capture window is, it is very poorly described + // in the doc. So I won't support it now. + break; + } + + case VIDIOCSWIN: + { + + struct video_window vw; + + if (copy_from_user(&vw, user_arg, sizeof(vw))) { + retval = -EFAULT; + break; + } + + DBG("VIDIOCSWIN %d x %d\n", vw.width, vw.height); + + if ( vw.width != 320 || vw.height != 240 ) + retval = -EFAULT; + + break; + } + + /* mmap interface */ + case VIDIOCGMBUF: + { + struct video_mbuf vm; + int i; + + DBG("VIDIOCGMBUF\n"); + memset(&vm, 0, sizeof (vm)); + vm.size = + VICAM_MAX_FRAME_SIZE * VICAM_FRAMES; + vm.frames = VICAM_FRAMES; + for (i = 0; i < VICAM_FRAMES; i++) + vm.offsets[i] = VICAM_MAX_FRAME_SIZE * i; + + if (copy_to_user(user_arg, (void *)&vm, sizeof(vm))) + retval = -EFAULT; + + break; + } + + case VIDIOCMCAPTURE: + { + struct video_mmap vm; + // int video_size; + + if (copy_from_user((void *)&vm, user_arg, sizeof(vm))) { + retval = -EFAULT; + break; + } + + DBG("VIDIOCMCAPTURE frame=%d, height=%d, width=%d, format=%d.\n",vm.frame,vm.width,vm.height,vm.format); + + if ( vm.frame >= VICAM_FRAMES || vm.format != VIDEO_PALETTE_RGB24 ) + retval = -EINVAL; + + // in theory right here we'd start the image capturing + // (fill in a bulk urb and submit it asynchronously) + // + // Instead we're going to do a total hack job for now and + // retrieve the frame in VIDIOCSYNC + + break; + } + + case VIDIOCSYNC: + { + int frame; + + if (copy_from_user((void *)&frame, user_arg, sizeof(int))) { + retval = -EFAULT; + break; + } + DBG("VIDIOCSYNC: %d\n", frame); + + read_frame(cam, frame); + vicam_decode_color(cam->raw_image, + cam->framebuf + + frame * VICAM_MAX_FRAME_SIZE ); + + break; + } + + /* pointless to implement overlay with this camera */ + case VIDIOCCAPTURE: + case VIDIOCGFBUF: + case VIDIOCSFBUF: + case VIDIOCKEY: + retval = -EINVAL; + break; + + /* tuner interface - we have none */ + case VIDIOCGTUNER: + case VIDIOCSTUNER: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + retval = -EINVAL; + break; + + /* audio interface - we have none */ + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + retval = -EINVAL; + break; + default: + retval = -ENOIOCTLCMD; + break; + } + + return retval; +} + +static int +vicam_open(struct inode *inode, struct file *file) +{ + struct video_device *dev = video_devdata(file); + struct vicam_camera *cam = + (struct vicam_camera *) dev->priv; + DBG("open\n"); + + if (!cam) { + printk(KERN_ERR + "vicam video_device improperly initialized"); + return -EINVAL; + } + + /* the videodev_lock held above us protects us from + * simultaneous opens...for now. we probably shouldn't + * rely on this fact forever. + */ + + if (cam->open_count > 0) { + printk(KERN_INFO + "vicam_open called on already opened camera"); + return -EBUSY; + } + + cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL); + if (!cam->raw_image) { + return -ENOMEM; + } + + cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + if (!cam->framebuf) { + kfree(cam->raw_image); + return -ENOMEM; + } + + cam->cntrlbuf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!cam->cntrlbuf) { + kfree(cam->raw_image); + rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + return -ENOMEM; + } + + // First upload firmware, then turn the camera on + + if (!cam->is_initialized) { + initialize_camera(cam); + + cam->is_initialized = 1; + } + + set_camera_power(cam, 1); + + cam->needsDummyRead = 1; + cam->open_count++; + + file->private_data = cam; + + return 0; +} + +static int +vicam_close(struct inode *inode, struct file *file) +{ + struct vicam_camera *cam = file->private_data; + int open_count; + struct usb_device *udev; + + DBG("close\n"); + + /* it's not the end of the world if + * we fail to turn the camera off. + */ + + set_camera_power(cam, 0); + + kfree(cam->raw_image); + rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES); + kfree(cam->cntrlbuf); + + mutex_lock(&cam->cam_lock); + + cam->open_count--; + open_count = cam->open_count; + udev = cam->udev; + + mutex_unlock(&cam->cam_lock); + + if (!open_count && !udev) { + kfree(cam); + } + + return 0; +} + +static void vicam_decode_color(const u8 *data, u8 *rgb) +{ + /* vicam_decode_color - Convert from Vicam Y-Cr-Cb to RGB + * Copyright (C) 2002 Monroe Williams (monroe@pobox.com) + */ + + int i, prevY, nextY; + + prevY = 512; + nextY = 512; + + data += VICAM_HEADER_SIZE; + + for( i = 0; i < 240; i++, data += 512 ) { + const int y = ( i * 242 ) / 240; + + int j, prevX, nextX; + int Y, Cr, Cb; + + if ( y == 242 - 1 ) { + nextY = -512; + } + + prevX = 1; + nextX = 1; + + for ( j = 0; j < 320; j++, rgb += 3 ) { + const int x = ( j * 512 ) / 320; + const u8 * const src = &data[x]; + + if ( x == 512 - 1 ) { + nextX = -1; + } + + Cr = ( src[prevX] - src[0] ) + + ( src[nextX] - src[0] ); + Cr /= 2; + + Cb = ( src[prevY] - src[prevX + prevY] ) + + ( src[prevY] - src[nextX + prevY] ) + + ( src[nextY] - src[prevX + nextY] ) + + ( src[nextY] - src[nextX + nextY] ); + Cb /= 4; + + Y = 1160 * ( src[0] + ( Cr / 2 ) - 16 ); + + if ( i & 1 ) { + int Ct = Cr; + Cr = Cb; + Cb = Ct; + } + + if ( ( x ^ i ) & 1 ) { + Cr = -Cr; + Cb = -Cb; + } + + rgb[0] = clamp( ( ( Y + ( 2017 * Cb ) ) + + 500 ) / 900, 0, 255 ); + rgb[1] = clamp( ( ( Y - ( 392 * Cb ) - + ( 813 * Cr ) ) + + 500 ) / 1000, 0, 255 ); + rgb[2] = clamp( ( ( Y + ( 1594 * Cr ) ) + + 500 ) / 1300, 0, 255 ); + + prevX = -1; + } + + prevY = -512; + } +} + +static void +read_frame(struct vicam_camera *cam, int framenum) +{ + unsigned char *request = cam->cntrlbuf; + int realShutter; + int n; + int actual_length; + + if (cam->needsDummyRead) { + cam->needsDummyRead = 0; + read_frame(cam, framenum); + } + + memset(request, 0, 16); + request[0] = cam->gain; // 0 = 0% gain, FF = 100% gain + + request[1] = 0; // 512x242 capture + + request[2] = 0x90; // the function of these two bytes + request[3] = 0x07; // is not yet understood + + if (cam->shutter_speed > 60) { + // Short exposure + realShutter = + ((-15631900 / cam->shutter_speed) + 260533) / 1000; + request[4] = realShutter & 0xFF; + request[5] = (realShutter >> 8) & 0xFF; + request[6] = 0x03; + request[7] = 0x01; + } else { + // Long exposure + realShutter = 15600 / cam->shutter_speed - 1; + request[4] = 0; + request[5] = 0; + request[6] = realShutter & 0xFF; + request[7] = realShutter >> 8; + } + + // Per John Markus Bjørndalen, byte at index 8 causes problems if it isn't 0 + request[8] = 0; + // bytes 9-15 do not seem to affect exposure or image quality + + mutex_lock(&cam->cam_lock); + + if (!cam->udev) { + goto done; + } + + n = __send_control_msg(cam, 0x51, 0x80, 0, request, 16); + + if (n < 0) { + printk(KERN_ERR + " Problem sending frame capture control message"); + goto done; + } + + n = usb_bulk_msg(cam->udev, + usb_rcvbulkpipe(cam->udev, cam->bulkEndpoint), + cam->raw_image, + 512 * 242 + 128, &actual_length, 10000); + + if (n < 0) { + printk(KERN_ERR "Problem during bulk read of frame data: %d\n", + n); + } + + done: + mutex_unlock(&cam->cam_lock); +} + +static ssize_t +vicam_read( struct file *file, char __user *buf, size_t count, loff_t *ppos ) +{ + struct vicam_camera *cam = file->private_data; + + DBG("read %d bytes.\n", (int) count); + + if (*ppos >= VICAM_MAX_FRAME_SIZE) { + *ppos = 0; + return 0; + } + + if (*ppos == 0) { + read_frame(cam, 0); + vicam_decode_color(cam->raw_image, + cam->framebuf + + 0 * VICAM_MAX_FRAME_SIZE); + } + + count = min_t(size_t, count, VICAM_MAX_FRAME_SIZE - *ppos); + + if (copy_to_user(buf, &cam->framebuf[*ppos], count)) { + count = -EFAULT; + } else { + *ppos += count; + } + + if (count == VICAM_MAX_FRAME_SIZE) { + *ppos = 0; + } + + return count; +} + + +static int +vicam_mmap(struct file *file, struct vm_area_struct *vma) +{ + // TODO: allocate the raw frame buffer if necessary + unsigned long page, pos; + unsigned long start = vma->vm_start; + unsigned long size = vma->vm_end-vma->vm_start; + struct vicam_camera *cam = file->private_data; + + if (!cam) + return -ENODEV; + + DBG("vicam_mmap: %ld\n", size); + + /* We let mmap allocate as much as it wants because Linux was adding 2048 bytes + * to the size the application requested for mmap and it was screwing apps up. + if (size > VICAM_FRAMES*VICAM_MAX_FRAME_SIZE) + return -EINVAL; + */ + + pos = (unsigned long)cam->framebuf; + while (size > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) + return -EAGAIN; + + start += PAGE_SIZE; + pos += PAGE_SIZE; + if (size > PAGE_SIZE) + size -= PAGE_SIZE; + else + size = 0; + } + + return 0; +} + +#if defined(CONFIG_VIDEO_PROC_FS) + +static struct proc_dir_entry *vicam_proc_root = NULL; + +static int vicam_read_helper(char *page, char **start, off_t off, + int count, int *eof, int value) +{ + char *out = page; + int len; + + out += sprintf(out, "%d",value); + + len = out - page; + len -= off; + if (len < count) { + *eof = 1; + if (len <= 0) + return 0; + } else + len = count; + + *start = page + off; + return len; +} + +static int vicam_read_proc_shutter(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + return vicam_read_helper(page,start,off,count,eof, + ((struct vicam_camera *)data)->shutter_speed); +} + +static int vicam_read_proc_gain(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + return vicam_read_helper(page,start,off,count,eof, + ((struct vicam_camera *)data)->gain); +} + +static int +vicam_write_proc_shutter(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + u16 stmp; + char kbuf[8]; + struct vicam_camera *cam = (struct vicam_camera *) data; + + if (count > 6) + return -EINVAL; + + if (copy_from_user(kbuf, buffer, count)) + return -EFAULT; + + stmp = (u16) simple_strtoul(kbuf, NULL, 10); + if (stmp < 4 || stmp > 32000) + return -EINVAL; + + cam->shutter_speed = stmp; + + return count; +} + +static int +vicam_write_proc_gain(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + u16 gtmp; + char kbuf[8]; + + struct vicam_camera *cam = (struct vicam_camera *) data; + + if (count > 4) + return -EINVAL; + + if (copy_from_user(kbuf, buffer, count)) + return -EFAULT; + + gtmp = (u16) simple_strtoul(kbuf, NULL, 10); + if (gtmp > 255) + return -EINVAL; + cam->gain = gtmp; + + return count; +} + +static void +vicam_create_proc_root(void) +{ + vicam_proc_root = proc_mkdir("video/vicam", NULL); + + if (vicam_proc_root) + vicam_proc_root->owner = THIS_MODULE; + else + printk(KERN_ERR + "could not create /proc entry for vicam!"); +} + +static void +vicam_destroy_proc_root(void) +{ + if (vicam_proc_root) + remove_proc_entry("video/vicam", 0); +} + +static void +vicam_create_proc_entry(struct vicam_camera *cam) +{ + char name[64]; + struct proc_dir_entry *ent; + + DBG(KERN_INFO "vicam: creating proc entry\n"); + + if (!vicam_proc_root || !cam) { + printk(KERN_INFO + "vicam: could not create proc entry, %s pointer is null.\n", + (!cam ? "camera" : "root")); + return; + } + + sprintf(name, "video%d", cam->vdev.minor); + + cam->proc_dir = proc_mkdir(name, vicam_proc_root); + + if ( !cam->proc_dir ) + return; // FIXME: We should probably return an error here + + ent = create_proc_entry("shutter", S_IFREG | S_IRUGO | S_IWUSR, + cam->proc_dir); + if (ent) { + ent->data = cam; + ent->read_proc = vicam_read_proc_shutter; + ent->write_proc = vicam_write_proc_shutter; + ent->size = 64; + } + + ent = create_proc_entry("gain", S_IFREG | S_IRUGO | S_IWUSR, + cam->proc_dir); + if (ent) { + ent->data = cam; + ent->read_proc = vicam_read_proc_gain; + ent->write_proc = vicam_write_proc_gain; + ent->size = 64; + } +} + +static void +vicam_destroy_proc_entry(void *ptr) +{ + struct vicam_camera *cam = (struct vicam_camera *) ptr; + char name[16]; + + if ( !cam->proc_dir ) + return; + + sprintf(name, "video%d", cam->vdev.minor); + remove_proc_entry("shutter", cam->proc_dir); + remove_proc_entry("gain", cam->proc_dir); + remove_proc_entry(name,vicam_proc_root); + cam->proc_dir = NULL; + +} + +#else +static inline void vicam_create_proc_root(void) { } +static inline void vicam_destroy_proc_root(void) { } +static inline void vicam_create_proc_entry(struct vicam_camera *cam) { } +static inline void vicam_destroy_proc_entry(void *ptr) { } +#endif + +static struct file_operations vicam_fops = { + .owner = THIS_MODULE, + .open = vicam_open, + .release = vicam_close, + .read = vicam_read, + .mmap = vicam_mmap, + .ioctl = vicam_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +static struct video_device vicam_template = { + .owner = THIS_MODULE, + .name = "ViCam-based USB Camera", + .type = VID_TYPE_CAPTURE, + .hardware = VID_HARDWARE_VICAM, + .fops = &vicam_fops, + .minor = -1, +}; + +/* table of devices that work with this driver */ +static struct usb_device_id vicam_table[] = { + {USB_DEVICE(USB_VICAM_VENDOR_ID, USB_VICAM_PRODUCT_ID)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, vicam_table); + +static struct usb_driver vicam_driver = { + .name = "vicam", + .probe = vicam_probe, + .disconnect = vicam_disconnect, + .id_table = vicam_table +}; + +/** + * vicam_probe + * @intf: the interface + * @id: the device id + * + * Called by the usb core when a new device is connected that it thinks + * this driver might be interested in. + */ +static int +vicam_probe( struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + int bulkEndpoint = 0; + const struct usb_host_interface *interface; + const struct usb_endpoint_descriptor *endpoint; + struct vicam_camera *cam; + + printk(KERN_INFO "ViCam based webcam connected\n"); + + interface = intf->cur_altsetting; + + DBG(KERN_DEBUG "Interface %d. has %u. endpoints!\n", + interface->desc.bInterfaceNumber, (unsigned) (interface->desc.bNumEndpoints)); + endpoint = &interface->endpoint[0].desc; + + if ((endpoint->bEndpointAddress & 0x80) && + ((endpoint->bmAttributes & 3) == 0x02)) { + /* we found a bulk in endpoint */ + bulkEndpoint = endpoint->bEndpointAddress; + } else { + printk(KERN_ERR + "No bulk in endpoint was found ?! (this is bad)\n"); + } + + if ((cam = + kmalloc(sizeof (struct vicam_camera), GFP_KERNEL)) == NULL) { + printk(KERN_WARNING + "could not allocate kernel memory for vicam_camera struct\n"); + return -ENOMEM; + } + + memset(cam, 0, sizeof (struct vicam_camera)); + + cam->shutter_speed = 15; + + mutex_init(&cam->cam_lock); + + memcpy(&cam->vdev, &vicam_template, + sizeof (vicam_template)); + cam->vdev.priv = cam; // sort of a reverse mapping for those functions that get vdev only + + cam->udev = dev; + cam->bulkEndpoint = bulkEndpoint; + + if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) { + kfree(cam); + printk(KERN_WARNING "video_register_device failed\n"); + return -EIO; + } + + vicam_create_proc_entry(cam); + + printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor); + + usb_set_intfdata (intf, cam); + + return 0; +} + +static void +vicam_disconnect(struct usb_interface *intf) +{ + int open_count; + struct vicam_camera *cam = usb_get_intfdata (intf); + usb_set_intfdata (intf, NULL); + + /* we must unregister the device before taking its + * cam_lock. This is because the video open call + * holds the same lock as video unregister. if we + * unregister inside of the cam_lock and open also + * uses the cam_lock, we get deadlock. + */ + + video_unregister_device(&cam->vdev); + + /* stop the camera from being used */ + + mutex_lock(&cam->cam_lock); + + /* mark the camera as gone */ + + cam->udev = NULL; + + vicam_destroy_proc_entry(cam); + + /* the only thing left to do is synchronize with + * our close/release function on who should release + * the camera memory. if there are any users using the + * camera, it's their job. if there are no users, + * it's ours. + */ + + open_count = cam->open_count; + + mutex_unlock(&cam->cam_lock); + + if (!open_count) { + kfree(cam); + } + + printk(KERN_DEBUG "ViCam-based WebCam disconnected\n"); +} + +/* + */ +static int __init +usb_vicam_init(void) +{ + int retval; + DBG(KERN_INFO "ViCam-based WebCam driver startup\n"); + vicam_create_proc_root(); + retval = usb_register(&vicam_driver); + if (retval) + printk(KERN_WARNING "usb_register failed!\n"); + return retval; +} + +static void __exit +usb_vicam_exit(void) +{ + DBG(KERN_INFO + "ViCam-based WebCam driver shutdown\n"); + + usb_deregister(&vicam_driver); + vicam_destroy_proc_root(); +} + +module_init(usb_vicam_init); +module_exit(usb_vicam_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index cd2c4475525e..11a97f30b876 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -97,7 +97,7 @@ int v4l2_video_std_construct(struct v4l2_standard *vs, memset(vs, 0, sizeof(struct v4l2_standard)); vs->index = index; vs->id = id; - if (id & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) { + if (id & V4L2_STD_525_60) { vs->frameperiod.numerator = 1001; vs->frameperiod.denominator = 30000; vs->framelines = 525; @@ -110,7 +110,6 @@ int v4l2_video_std_construct(struct v4l2_standard *vs, return 0; } - /* ----------------------------------------------------------------- */ /* priority handling */ @@ -171,7 +170,7 @@ int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority *local) /* ----------------------------------------------------------------- */ -/* some arrays for pretty-printing debug messages */ +/* some arrays for pretty-printing debug messages of enum types */ char *v4l2_field_names[] = { [V4L2_FIELD_ANY] = "any", @@ -192,6 +191,14 @@ char *v4l2_type_names[] = { [V4L2_BUF_TYPE_VBI_OUTPUT] = "vbi-out", }; +static char *v4l2_memory_names[] = { + [V4L2_MEMORY_MMAP] = "mmap", + [V4L2_MEMORY_USERPTR] = "userptr", + [V4L2_MEMORY_OVERLAY] = "overlay", +}; + +#define prt_names(a,arr) (((a)>=0)&&((a)<ARRAY_SIZE(arr)))?arr[a]:"unknown" + /* ------------------------------------------------------------------ */ /* debug help functions */ @@ -305,8 +312,6 @@ static const char *v4l2_int_ioctls[] = { [_IOC_NR(DECODER_DUMP)] = "DECODER_DUMP", #endif [_IOC_NR(AUDC_SET_RADIO)] = "AUDC_SET_RADIO", - [_IOC_NR(AUDC_SET_INPUT)] = "AUDC_SET_INPUT", - [_IOC_NR(MSP_SET_MATRIX)] = "MSP_SET_MATRIX", [_IOC_NR(TUNER_SET_TYPE_ADDR)] = "TUNER_SET_TYPE_ADDR", [_IOC_NR(TUNER_SET_STANDBY)] = "TUNER_SET_STANDBY", @@ -324,6 +329,15 @@ static const char *v4l2_int_ioctls[] = { }; #define V4L2_INT_IOCTLS ARRAY_SIZE(v4l2_int_ioctls) +static void v4l_print_pix_fmt (char *s, struct v4l2_pix_format *fmt) +{ + printk ("%s: width=%d, height=%d, format=%d, field=%s, " + "bytesperline=%d sizeimage=%d, colorspace=%d\n", s, + fmt->width,fmt->height,fmt->pixelformat, + prt_names(fmt->field,v4l2_field_names), + fmt->bytesperline,fmt->sizeimage,fmt->colorspace); +}; + /* Common ioctl debug function. This function can be used by external ioctl messages as well as internal V4L ioctl */ void v4l_printk_ioctl(unsigned int cmd) @@ -362,6 +376,537 @@ void v4l_printk_ioctl(unsigned int cmd) } } +/* Common ioctl debug function. This function can be used by + external ioctl messages as well as internal V4L ioctl and its + arguments */ +void v4l_printk_ioctl_arg(char *s,unsigned int cmd, void *arg) +{ + printk(s); + printk(": "); + v4l_printk_ioctl(cmd); + switch (cmd) { + case VIDIOC_INT_G_CHIP_IDENT: + { + enum v4l2_chip_ident *p=arg; + printk ("%s: chip ident=%d\n", s, *p); + break; + } + case VIDIOC_G_PRIORITY: + case VIDIOC_S_PRIORITY: + { + enum v4l2_priority *p=arg; + printk ("%s: priority=%d\n", s, *p); + break; + } + case VIDIOC_INT_S_TUNER_MODE: + { + enum v4l2_tuner_type *p=arg; + printk ("%s: tuner type=%d\n", s, *p); + break; + } + case DECODER_SET_VBI_BYPASS: + case DECODER_ENABLE_OUTPUT: + case DECODER_GET_STATUS: + case DECODER_SET_OUTPUT: + case DECODER_SET_INPUT: + case DECODER_SET_GPIO: + case DECODER_SET_NORM: + case VIDIOCCAPTURE: + case VIDIOCSYNC: + case VIDIOCSWRITEMODE: + case TUNER_SET_TYPE_ADDR: + case TUNER_SET_STANDBY: + case TDA9887_SET_CONFIG: + case VIDIOC_OVERLAY_OLD: + case VIDIOC_STREAMOFF: + case VIDIOC_G_OUTPUT: + case VIDIOC_S_OUTPUT: + case VIDIOC_STREAMON: + case VIDIOC_G_INPUT: + case VIDIOC_OVERLAY: + case VIDIOC_S_INPUT: + { + int *p=arg; + printk ("%s: value=%d\n", s, *p); + break; + } + case VIDIOC_G_AUDIO: + case VIDIOC_S_AUDIO: + case VIDIOC_ENUMAUDIO: + case VIDIOC_G_AUDIO_OLD: + { + struct v4l2_audio *p=arg; + + printk ("%s: index=%d, name=%s, capability=%d, mode=%d\n", + s,p->index, p->name,p->capability, p->mode); + break; + } + case VIDIOC_G_AUDOUT: + case VIDIOC_S_AUDOUT: + case VIDIOC_ENUMAUDOUT: + case VIDIOC_G_AUDOUT_OLD: + { + struct v4l2_audioout *p=arg; + printk ("%s: index=%d, name=%s, capability=%d, mode=%d\n", s, + p->index, p->name, p->capability,p->mode); + break; + } + case VIDIOC_QBUF: + case VIDIOC_DQBUF: + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *p=arg; + struct v4l2_timecode *tc=&p->timecode; + printk ("%s: %02ld:%02d:%02d.%08ld index=%d, type=%s, " + "bytesused=%d, flags=0x%08x, " + "field=%0d, sequence=%d, memory=%s, offset/userptr=0x%08lx\n", + s, + (p->timestamp.tv_sec/3600), + (int)(p->timestamp.tv_sec/60)%60, + (int)(p->timestamp.tv_sec%60), + p->timestamp.tv_usec, + p->index, + prt_names(p->type,v4l2_type_names), + p->bytesused,p->flags, + p->field,p->sequence, + prt_names(p->memory,v4l2_memory_names), + p->m.userptr); + printk ("%s: timecode= %02d:%02d:%02d type=%d, " + "flags=0x%08x, frames=%d, userbits=0x%p\n", + s,tc->hours,tc->minutes,tc->seconds, + tc->type, tc->flags, tc->frames, tc->userbits); + break; + } + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *p=arg; + printk ("%s: driver=%s, card=%s, bus=%s, version=0x%08x, " + "capabilities=0x%08x\n", s, + p->driver,p->card,p->bus_info, + p->version, + p->capabilities); + break; + } + case VIDIOC_G_CTRL: + case VIDIOC_S_CTRL: + case VIDIOC_S_CTRL_OLD: + { + struct v4l2_control *p=arg; + printk ("%s: id=%d, value=%d\n", s, p->id, p->value); + break; + } + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + { + struct v4l2_crop *p=arg; + /*FIXME: Should also show rect structs */ + printk ("%s: type=%d\n", s, p->type); + break; + } + case VIDIOC_CROPCAP: + case VIDIOC_CROPCAP_OLD: + { + struct v4l2_cropcap *p=arg; + /*FIXME: Should also show rect structs */ + printk ("%s: type=%d\n", s, p->type); + break; + } + case VIDIOC_INT_DECODE_VBI_LINE: + { + struct v4l2_decode_vbi_line *p=arg; + printk ("%s: is_second_field=%d, ptr=0x%08lx, line=%d, " + "type=%d\n", s, + p->is_second_field,(unsigned long)p->p,p->line,p->type); + break; + } + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *p=arg; + printk ("%s: index=%d, type=%d, flags=%d, description=%s," + " pixelformat=%d\n", s, + p->index, p->type, p->flags,p->description, + p->pixelformat); + + break; + } + case VIDIOC_G_FMT: + case VIDIOC_S_FMT: + case VIDIOC_TRY_FMT: + { + struct v4l2_format *p=arg; + printk ("%s: type=%s\n", s, + prt_names(p->type,v4l2_type_names)); + switch (p->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + v4l_print_pix_fmt (s, &p->fmt.pix); + break; + default: + break; + } + } + case VIDIOC_G_FBUF: + case VIDIOC_S_FBUF: + { + struct v4l2_framebuffer *p=arg; + printk ("%s: capability=%d, flags=%d, base=0x%08lx\n", s, + p->capability,p->flags, (unsigned long)p->base); + v4l_print_pix_fmt (s, &p->fmt); + break; + } + case VIDIOC_G_FREQUENCY: + case VIDIOC_S_FREQUENCY: + { + struct v4l2_frequency *p=arg; + printk ("%s: tuner=%d, type=%d, frequency=%d\n", s, + p->tuner,p->type,p->frequency); + break; + } + case VIDIOC_ENUMINPUT: + { + struct v4l2_input *p=arg; + printk ("%s: index=%d, name=%s, type=%d, audioset=%d, " + "tuner=%d, std=%Ld, status=%d\n", s, + p->index,p->name,p->type,p->audioset, + p->tuner, + (unsigned long long)p->std, + p->status); + break; + } + case VIDIOC_G_JPEGCOMP: + case VIDIOC_S_JPEGCOMP: + { + struct v4l2_jpegcompression *p=arg; + printk ("%s: quality=%d, APPn=%d, APP_len=%d, COM_len=%d," + " jpeg_markers=%d\n", s, + p->quality,p->APPn,p->APP_len, + p->COM_len,p->jpeg_markers); + break; + } + case VIDIOC_G_MODULATOR: + case VIDIOC_S_MODULATOR: + { + struct v4l2_modulator *p=arg; + printk ("%s: index=%d, name=%s, capability=%d, rangelow=%d," + " rangehigh=%d, txsubchans=%d\n", s, + p->index, p->name,p->capability,p->rangelow, + p->rangehigh,p->txsubchans); + break; + } + case VIDIOC_G_MPEGCOMP: + case VIDIOC_S_MPEGCOMP: + { + struct v4l2_mpeg_compression *p=arg; + /*FIXME: Several fields not shown */ + printk ("%s: ts_pid_pmt=%d, ts_pid_audio=%d, ts_pid_video=%d, " + "ts_pid_pcr=%d, ps_size=%d, au_sample_rate=%d, " + "au_pesid=%c, vi_frame_rate=%d, vi_frames_per_gop=%d, " + "vi_bframes_count=%d, vi_pesid=%c\n", s, + p->ts_pid_pmt,p->ts_pid_audio, p->ts_pid_video, + p->ts_pid_pcr, p->ps_size, p->au_sample_rate, + p->au_pesid, p->vi_frame_rate, + p->vi_frames_per_gop, p->vi_bframes_count, + p->vi_pesid); + break; + } + case VIDIOC_ENUMOUTPUT: + { + struct v4l2_output *p=arg; + printk ("%s: index=%d, name=%s,type=%d, audioset=%d, " + "modulator=%d, std=%Ld\n", + s,p->index,p->name,p->type,p->audioset, + p->modulator, + (unsigned long long)p->std); + break; + } + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *p=arg; + printk ("%s: id=%d, type=%d, name=%s, min/max=%d/%d," + " step=%d, default=%d, flags=0x%08x\n", s, + p->id,p->type,p->name,p->minimum,p->maximum, + p->step,p->default_value,p->flags); + break; + } + case VIDIOC_QUERYMENU: + { + struct v4l2_querymenu *p=arg; + printk ("%s: id=%d, index=%d, name=%s\n", s, + p->id,p->index,p->name); + break; + } + case VIDIOC_INT_G_REGISTER: + case VIDIOC_INT_S_REGISTER: + { + struct v4l2_register *p=arg; + printk ("%s: i2c_id=%d, reg=%lu, val=%d\n", s, + p->i2c_id,p->reg,p->val); + + break; + } + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *p=arg; + printk ("%s: count=%d, type=%s, memory=%s\n", s, + p->count, + prt_names(p->type,v4l2_type_names), + prt_names(p->memory,v4l2_memory_names)); + break; + } + case VIDIOC_INT_S_AUDIO_ROUTING: + case VIDIOC_INT_S_VIDEO_ROUTING: + case VIDIOC_INT_G_AUDIO_ROUTING: + case VIDIOC_INT_G_VIDEO_ROUTING: + { + struct v4l2_routing *p=arg; + printk ("%s: input=0x%x, output=0x%x\n", s, p->input, p->output); + break; + } + case VIDIOC_G_SLICED_VBI_CAP: + { + struct v4l2_sliced_vbi_cap *p=arg; + printk ("%s: service_set=%d\n", s, + p->service_set); + break; + } + case VIDIOC_INT_S_VBI_DATA: + case VIDIOC_INT_G_VBI_DATA: + { + struct v4l2_sliced_vbi_data *p=arg; + printk ("%s: id=%d, field=%d, line=%d\n", s, + p->id, p->field, p->line); + break; + } + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *p=arg; + printk ("%s: index=%d, id=%Ld, name=%s, fps=%d/%d, " + "framelines=%d\n", s, p->index, + (unsigned long long)p->id, p->name, + p->frameperiod.numerator, + p->frameperiod.denominator, + p->framelines); + + break; + } + case VIDIOC_G_PARM: + case VIDIOC_S_PARM: + case VIDIOC_S_PARM_OLD: + { + struct v4l2_streamparm *p=arg; + printk ("%s: type=%d\n", s, p->type); + + break; + } + case VIDIOC_G_TUNER: + case VIDIOC_S_TUNER: + { + struct v4l2_tuner *p=arg; + printk ("%s: index=%d, name=%s, type=%d, capability=%d, " + "rangelow=%d, rangehigh=%d, signal=%d, afc=%d, " + "rxsubchans=%d, audmode=%d\n", s, + p->index, p->name, p->type, + p->capability, p->rangelow,p->rangehigh, + p->rxsubchans, p->audmode, p->signal, + p->afc); + break; + } + case VIDIOCGVBIFMT: + case VIDIOCSVBIFMT: + { + struct vbi_format *p=arg; + printk ("%s: sampling_rate=%d, samples_per_line=%d, " + "sample_format=%d, start=%d/%d, count=%d/%d, flags=%d\n", s, + p->sampling_rate,p->samples_per_line, + p->sample_format,p->start[0],p->start[1], + p->count[0],p->count[1],p->flags); + break; + } + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + { + struct video_audio *p=arg; + printk ("%s: audio=%d, volume=%d, bass=%d, treble=%d, " + "flags=%d, name=%s, mode=%d, balance=%d, step=%d\n", + s,p->audio,p->volume,p->bass, p->treble, + p->flags,p->name,p->mode,p->balance,p->step); + break; + } + case VIDIOCGFBUF: + case VIDIOCSFBUF: + { + struct video_buffer *p=arg; + printk ("%s: base=%08lx, height=%d, width=%d, depth=%d, " + "bytesperline=%d\n", s, + (unsigned long) p->base, p->height, p->width, + p->depth,p->bytesperline); + break; + } + case VIDIOCGCAP: + { + struct video_capability *p=arg; + printk ("%s: name=%s, type=%d, channels=%d, audios=%d, " + "maxwidth=%d, maxheight=%d, minwidth=%d, minheight=%d\n", + s,p->name,p->type,p->channels,p->audios, + p->maxwidth,p->maxheight,p->minwidth, + p->minheight); + + break; + } + case VIDIOCGCAPTURE: + case VIDIOCSCAPTURE: + { + struct video_capture *p=arg; + printk ("%s: x=%d, y=%d, width=%d, height=%d, decimation=%d," + " flags=%d\n", s, + p->x, p->y,p->width, p->height, + p->decimation,p->flags); + break; + } + case VIDIOCGCHAN: + case VIDIOCSCHAN: + { + struct video_channel *p=arg; + printk ("%s: channel=%d, name=%s, tuners=%d, flags=%d, " + "type=%d, norm=%d\n", s, + p->channel,p->name,p->tuners, + p->flags,p->type,p->norm); + + break; + } + case VIDIOCSMICROCODE: + { + struct video_code *p=arg; + printk ("%s: loadwhat=%s, datasize=%d\n", s, + p->loadwhat,p->datasize); + break; + } + case DECODER_GET_CAPABILITIES: + { + struct video_decoder_capability *p=arg; + printk ("%s: flags=%d, inputs=%d, outputs=%d\n", s, + p->flags,p->inputs,p->outputs); + break; + } + case DECODER_INIT: + { + struct video_decoder_init *p=arg; + printk ("%s: len=%c\n", s, p->len); + break; + } + case VIDIOCGPLAYINFO: + { + struct video_info *p=arg; + printk ("%s: frame_count=%d, h_size=%d, v_size=%d, " + "smpte_timecode=%d, picture_type=%d, " + "temporal_reference=%d, user_data=%s\n", s, + p->frame_count, p->h_size, + p->v_size, p->smpte_timecode, + p->picture_type, p->temporal_reference, + p->user_data); + break; + } + case VIDIOCKEY: + { + struct video_key *p=arg; + printk ("%s: key=%s, flags=%d\n", s, + p->key, p->flags); + break; + } + case VIDIOCGMBUF: + { + struct video_mbuf *p=arg; + printk ("%s: size=%d, frames=%d, offsets=0x%08lx\n", s, + p->size, + p->frames, + (unsigned long)p->offsets); + break; + } + case VIDIOCMCAPTURE: + { + struct video_mmap *p=arg; + printk ("%s: frame=%d, height=%d, width=%d, format=%d\n", s, + p->frame, + p->height, p->width, + p->format); + break; + } + case VIDIOCGPICT: + case VIDIOCSPICT: + case DECODER_SET_PICTURE: + { + struct video_picture *p=arg; + + printk ("%s: brightness=%d, hue=%d, colour=%d, contrast=%d," + " whiteness=%d, depth=%d, palette=%d\n", s, + p->brightness, p->hue, p->colour, + p->contrast, p->whiteness, p->depth, + p->palette); + break; + } + case VIDIOCSPLAYMODE: + { + struct video_play_mode *p=arg; + printk ("%s: mode=%d, p1=%d, p2=%d\n", s, + p->mode,p->p1,p->p2); + break; + } + case VIDIOCGTUNER: + case VIDIOCSTUNER: + { + struct video_tuner *p=arg; + printk ("%s: tuner=%d, name=%s, rangelow=%ld, rangehigh=%ld, " + "flags=%d, mode=%d, signal=%d\n", s, + p->tuner, p->name,p->rangelow, p->rangehigh, + p->flags,p->mode, p->signal); + break; + } + case VIDIOCGUNIT: + { + struct video_unit *p=arg; + printk ("%s: video=%d, vbi=%d, radio=%d, audio=%d, " + "teletext=%d\n", s, + p->video,p->vbi,p->radio,p->audio,p->teletext); + break; + } + case VIDIOCGWIN: + case VIDIOCSWIN: + { + struct video_window *p=arg; + printk ("%s: x=%d, y=%d, width=%d, height=%d, chromakey=%d," + " flags=%d, clipcount=%d\n", s, + p->x, p->y,p->width, p->height, + p->chromakey,p->flags, + p->clipcount); + break; + } + case VIDIOC_INT_AUDIO_CLOCK_FREQ: + case VIDIOC_INT_I2S_CLOCK_FREQ: + case VIDIOC_INT_S_STANDBY: + { + u32 *p=arg; + + printk ("%s: value=%d\n", s, *p); + break; + } + case VIDIOCGFREQ: + case VIDIOCSFREQ: + { + unsigned long *p=arg; + printk ("%s: value=%lu\n", s, *p); + break; + } + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + { + v4l2_std_id *p=arg; + + printk ("%s: value=%Lu\n", s, (unsigned long long)*p); + break; + } + } +} + /* ----------------------------------------------------------------- */ EXPORT_SYMBOL(v4l2_video_std_construct); @@ -376,6 +921,7 @@ EXPORT_SYMBOL(v4l2_prio_check); EXPORT_SYMBOL(v4l2_field_names); EXPORT_SYMBOL(v4l2_type_names); EXPORT_SYMBOL(v4l_printk_ioctl); +EXPORT_SYMBOL(v4l_printk_ioctl_arg); /* * Local variables: diff --git a/drivers/media/video/video-buf-dvb.c b/drivers/media/video/video-buf-dvb.c index 0a4004a4393c..caf3e7e2f219 100644 --- a/drivers/media/video/video-buf-dvb.c +++ b/drivers/media/video/video-buf-dvb.c @@ -96,7 +96,7 @@ static int videobuf_dvb_start_feed(struct dvb_demux_feed *feed) if (!demux->dmx.frontend) return -EINVAL; - down(&dvb->lock); + mutex_lock(&dvb->lock); dvb->nfeeds++; rc = dvb->nfeeds; @@ -110,7 +110,7 @@ static int videobuf_dvb_start_feed(struct dvb_demux_feed *feed) } out: - up(&dvb->lock); + mutex_unlock(&dvb->lock); return rc; } @@ -120,14 +120,14 @@ static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed) struct videobuf_dvb *dvb = demux->priv; int err = 0; - down(&dvb->lock); + mutex_lock(&dvb->lock); dvb->nfeeds--; if (0 == dvb->nfeeds && NULL != dvb->thread) { // FIXME: cx8802_cancel_buffers(dev); err = kthread_stop(dvb->thread); dvb->thread = NULL; } - up(&dvb->lock); + mutex_unlock(&dvb->lock); return err; } @@ -139,7 +139,7 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, { int result; - init_MUTEX(&dvb->lock); + mutex_init(&dvb->lock); /* register adapter */ result = dvb_register_adapter(&dvb->adapter, dvb->name, module); diff --git a/drivers/media/video/video-buf.c b/drivers/media/video/video-buf.c index 9ef477523d27..d2ca0f08d0df 100644 --- a/drivers/media/video/video-buf.c +++ b/drivers/media/video/video-buf.c @@ -1,15 +1,20 @@ /* * * generic helper functions for video4linux capture buffers, to handle - * memory management and PCI DMA. Right now bttv + saa7134 use it. + * memory management and PCI DMA. + * Right now, bttv, saa7134, saa7146 and cx88 use it. * * The functions expect the hardware being able to scatter gatter * (i.e. the buffers are not linear in physical memory, but fragmented * into PAGE_SIZE chunks). They also assume the driver does not need - * to touch the video data (thus it is probably not useful for USB 1.1 - * as data often must be uncompressed by the drivers). + * to touch the video data. + * + * device specific map/unmap/sync stuff now are mapped as operations + * to allow its usage by USB and virtual devices. * * (c) 2001-2004 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs] + * (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org> + * (c) 2006 Ted Walther and John Sokol * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -59,8 +64,7 @@ videobuf_vmalloc_to_sg(unsigned char *virt, int nr_pages) pg = vmalloc_to_page(virt); if (NULL == pg) goto err; - if (PageHighMem(pg)) - BUG(); + BUG_ON(PageHighMem(pg)); sglist[i].page = pg; sglist[i].length = PAGE_SIZE; } @@ -168,6 +172,9 @@ int videobuf_dma_init_kernel(struct videobuf_dmabuf *dma, int direction, dprintk(1,"vmalloc_32(%d pages) failed\n",nr_pages); return -ENOMEM; } + dprintk(1,"vmalloc is at addr 0x%08lx, size=%d\n", + (unsigned long)dma->vmalloc, + nr_pages << PAGE_SHIFT); memset(dma->vmalloc,0,nr_pages << PAGE_SHIFT); dma->nr_pages = nr_pages; return 0; @@ -187,8 +194,10 @@ int videobuf_dma_init_overlay(struct videobuf_dmabuf *dma, int direction, return 0; } -int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma) +int videobuf_dma_map(struct videobuf_queue* q,struct videobuf_dmabuf *dma) { + void *dev=q->dev; + MAGIC_CHECK(dma->magic,MAGIC_DMABUF); BUG_ON(0 == dma->nr_pages); @@ -198,7 +207,7 @@ int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma) } if (dma->vmalloc) { dma->sglist = videobuf_vmalloc_to_sg - (dma->vmalloc,dma->nr_pages); + (dma->vmalloc,dma->nr_pages); } if (dma->bus_addr) { dma->sglist = kmalloc(sizeof(struct scatterlist), GFP_KERNEL); @@ -213,13 +222,14 @@ int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma) dprintk(1,"scatterlist is NULL\n"); return -ENOMEM; } - if (!dma->bus_addr) { - dma->sglen = pci_map_sg(dev,dma->sglist,dma->nr_pages, - dma->direction); + if (q->ops->vb_map_sg) { + dma->sglen = q->ops->vb_map_sg(dev,dma->sglist, + dma->nr_pages, dma->direction); + } if (0 == dma->sglen) { printk(KERN_WARNING - "%s: pci_map_sg failed\n",__FUNCTION__); + "%s: videobuf_map_sg failed\n",__FUNCTION__); kfree(dma->sglist); dma->sglist = NULL; dma->sglen = 0; @@ -229,24 +239,31 @@ int videobuf_dma_pci_map(struct pci_dev *dev, struct videobuf_dmabuf *dma) return 0; } -int videobuf_dma_pci_sync(struct pci_dev *dev, struct videobuf_dmabuf *dma) +int videobuf_dma_sync(struct videobuf_queue* q,struct videobuf_dmabuf *dma) { + void *dev=q->dev; + MAGIC_CHECK(dma->magic,MAGIC_DMABUF); BUG_ON(!dma->sglen); - if (!dma->bus_addr) - pci_dma_sync_sg_for_cpu(dev,dma->sglist,dma->nr_pages,dma->direction); + if (!dma->bus_addr && q->ops->vb_dma_sync_sg) + q->ops->vb_dma_sync_sg(dev,dma->sglist,dma->nr_pages, + dma->direction); + return 0; } -int videobuf_dma_pci_unmap(struct pci_dev *dev, struct videobuf_dmabuf *dma) +int videobuf_dma_unmap(struct videobuf_queue* q,struct videobuf_dmabuf *dma) { + void *dev=q->dev; + MAGIC_CHECK(dma->magic,MAGIC_DMABUF); if (!dma->sglen) return 0; - if (!dma->bus_addr) - pci_unmap_sg(dev,dma->sglist,dma->nr_pages,dma->direction); + if (!dma->bus_addr && q->ops->vb_unmap_sg) + q->ops->vb_unmap_sg(dev,dma->sglist,dma->nr_pages, + dma->direction); kfree(dma->sglist); dma->sglist = NULL; dma->sglen = 0; @@ -319,7 +336,7 @@ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr) } int -videobuf_iolock(struct pci_dev *pci, struct videobuf_buffer *vb, +videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb, struct v4l2_framebuffer *fbuf) { int err,pages; @@ -358,7 +375,7 @@ videobuf_iolock(struct pci_dev *pci, struct videobuf_buffer *vb, default: BUG(); } - err = videobuf_dma_pci_map(pci,&vb->dma); + err = videobuf_dma_map(q,&vb->dma); if (0 != err) return err; @@ -367,9 +384,41 @@ videobuf_iolock(struct pci_dev *pci, struct videobuf_buffer *vb, /* --------------------------------------------------------------------- */ +void videobuf_queue_pci(struct videobuf_queue* q) +{ + /* If not specified, defaults to PCI map sg */ + if (!q->ops->vb_map_sg) + q->ops->vb_map_sg=(vb_map_sg_t *)pci_map_sg; + + if (!q->ops->vb_dma_sync_sg) + q->ops->vb_dma_sync_sg=(vb_map_sg_t *)pci_dma_sync_sg_for_cpu; + if (!q->ops->vb_unmap_sg) + q->ops->vb_unmap_sg=(vb_map_sg_t *)pci_unmap_sg; +} + +int videobuf_pci_dma_map(struct pci_dev *pci,struct videobuf_dmabuf *dma) +{ + struct videobuf_queue q; + + q.dev=pci; + q.ops->vb_map_sg=(vb_map_sg_t *)pci_unmap_sg; + + return (videobuf_dma_unmap(&q,dma)); +} + +int videobuf_pci_dma_unmap(struct pci_dev *pci,struct videobuf_dmabuf *dma) +{ + struct videobuf_queue q; + + q.dev=pci; + q.ops->vb_map_sg=(vb_map_sg_t *)pci_unmap_sg; + + return (videobuf_dma_unmap(&q,dma)); +} + void videobuf_queue_init(struct videobuf_queue* q, struct videobuf_queue_ops *ops, - struct pci_dev *pci, + void *dev, spinlock_t *irqlock, enum v4l2_buf_type type, enum v4l2_field field, @@ -378,14 +427,16 @@ void videobuf_queue_init(struct videobuf_queue* q, { memset(q,0,sizeof(*q)); q->irqlock = irqlock; - q->pci = pci; + q->dev = dev; q->type = type; q->field = field; q->msize = msize; q->ops = ops; q->priv_data = priv; - init_MUTEX(&q->lock); + videobuf_queue_pci(q); + + mutex_init(&q->lock); INIT_LIST_HEAD(&q->stream); } @@ -428,11 +479,12 @@ videobuf_queue_is_busy(struct videobuf_queue *q) void videobuf_queue_cancel(struct videobuf_queue *q) { - unsigned long flags; + unsigned long flags=0; int i; /* remove queued buffers from list */ - spin_lock_irqsave(q->irqlock,flags); + if (q->irqlock) + spin_lock_irqsave(q->irqlock,flags); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; @@ -441,7 +493,8 @@ videobuf_queue_cancel(struct videobuf_queue *q) q->bufs[i]->state = STATE_ERROR; } } - spin_unlock_irqrestore(q->irqlock,flags); + if (q->irqlock) + spin_unlock_irqrestore(q->irqlock,flags); /* free all buffers + clear queue */ for (i = 0; i < VIDEO_MAX_FRAME; i++) { @@ -535,21 +588,31 @@ videobuf_reqbufs(struct videobuf_queue *q, unsigned int size,count; int retval; - if (req->type != q->type) + if (req->type != q->type) { + dprintk(1,"reqbufs: queue type invalid\n"); return -EINVAL; - if (req->count < 1) + } + if (req->count < 1) { + dprintk(1,"reqbufs: count invalid (%d)\n",req->count); return -EINVAL; + } if (req->memory != V4L2_MEMORY_MMAP && req->memory != V4L2_MEMORY_USERPTR && - req->memory != V4L2_MEMORY_OVERLAY) + req->memory != V4L2_MEMORY_OVERLAY) { + dprintk(1,"reqbufs: memory type invalid\n"); return -EINVAL; + } - if (q->streaming) + if (q->streaming) { + dprintk(1,"reqbufs: streaming already exists\n"); return -EBUSY; - if (!list_empty(&q->stream)) + } + if (!list_empty(&q->stream)) { + dprintk(1,"reqbufs: stream running\n"); return -EBUSY; + } - down(&q->lock); + mutex_lock(&q->lock); count = req->count; if (count > VIDEO_MAX_FRAME) count = VIDEO_MAX_FRAME; @@ -560,25 +623,33 @@ videobuf_reqbufs(struct videobuf_queue *q, count, size, (count*size)>>PAGE_SHIFT); retval = videobuf_mmap_setup(q,count,size,req->memory); - if (retval < 0) + if (retval < 0) { + dprintk(1,"reqbufs: mmap setup returned %d\n",retval); goto done; + } req->count = count; done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b) { - if (unlikely(b->type != q->type)) + if (unlikely(b->type != q->type)) { + dprintk(1,"querybuf: Wrong type.\n"); return -EINVAL; - if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) + } + if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) { + dprintk(1,"querybuf: index out of range.\n"); return -EINVAL; - if (unlikely(NULL == q->bufs[b->index])) + } + if (unlikely(NULL == q->bufs[b->index])) { + dprintk(1,"querybuf: buffer is null.\n"); return -EINVAL; + } videobuf_status(b,q->bufs[b->index],q->type); return 0; } @@ -589,31 +660,45 @@ videobuf_qbuf(struct videobuf_queue *q, { struct videobuf_buffer *buf; enum v4l2_field field; - unsigned long flags; + unsigned long flags=0; int retval; - down(&q->lock); + mutex_lock(&q->lock); retval = -EBUSY; - if (q->reading) + if (q->reading) { + dprintk(1,"qbuf: Reading running...\n"); goto done; + } retval = -EINVAL; - if (b->type != q->type) + if (b->type != q->type) { + dprintk(1,"qbuf: Wrong type.\n"); goto done; - if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) + } + if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) { + dprintk(1,"qbuf: index out of range.\n"); goto done; + } buf = q->bufs[b->index]; - if (NULL == buf) + if (NULL == buf) { + dprintk(1,"qbuf: buffer is null.\n"); goto done; + } MAGIC_CHECK(buf->magic,MAGIC_BUFFER); - if (buf->memory != b->memory) + if (buf->memory != b->memory) { + dprintk(1,"qbuf: memory type is wrong.\n"); goto done; + } if (buf->state == STATE_QUEUED || - buf->state == STATE_ACTIVE) + buf->state == STATE_ACTIVE) { + dprintk(1,"qbuf: buffer is already queued or active.\n"); goto done; + } if (b->flags & V4L2_BUF_FLAG_INPUT) { - if (b->input >= q->inputs) + if (b->input >= q->inputs) { + dprintk(1,"qbuf: wrong input.\n"); goto done; + } buf->input = b->input; } else { buf->input = UNSET; @@ -621,12 +706,16 @@ videobuf_qbuf(struct videobuf_queue *q, switch (b->memory) { case V4L2_MEMORY_MMAP: - if (0 == buf->baddr) + if (0 == buf->baddr) { + dprintk(1,"qbuf: mmap requested but buffer addr is zero!\n"); goto done; + } break; case V4L2_MEMORY_USERPTR: - if (b->length < buf->bsize) + if (b->length < buf->bsize) { + dprintk(1,"qbuf: buffer length is not enough\n"); goto done; + } if (STATE_NEEDS_INIT != buf->state && buf->baddr != b->m.userptr) q->ops->buf_release(q,buf); buf->baddr = b->m.userptr; @@ -635,24 +724,31 @@ videobuf_qbuf(struct videobuf_queue *q, buf->boff = b->m.offset; break; default: + dprintk(1,"qbuf: wrong memory type\n"); goto done; } + dprintk(1,"qbuf: requesting next field\n"); field = videobuf_next_field(q); retval = q->ops->buf_prepare(q,buf,field); - if (0 != retval) + if (0 != retval) { + dprintk(1,"qbuf: buffer_prepare returned %d\n",retval); goto done; + } list_add_tail(&buf->stream,&q->stream); if (q->streaming) { - spin_lock_irqsave(q->irqlock,flags); + if (q->irqlock) + spin_lock_irqsave(q->irqlock,flags); q->ops->buf_queue(q,buf); - spin_unlock_irqrestore(q->irqlock,flags); + if (q->irqlock) + spin_unlock_irqrestore(q->irqlock,flags); } + dprintk(1,"qbuf: succeded\n"); retval = 0; done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } @@ -663,28 +759,41 @@ videobuf_dqbuf(struct videobuf_queue *q, struct videobuf_buffer *buf; int retval; - down(&q->lock); + mutex_lock(&q->lock); retval = -EBUSY; - if (q->reading) + if (q->reading) { + dprintk(1,"dqbuf: Reading running...\n"); goto done; + } retval = -EINVAL; - if (b->type != q->type) + if (b->type != q->type) { + dprintk(1,"dqbuf: Wrong type.\n"); goto done; - if (list_empty(&q->stream)) + } + if (list_empty(&q->stream)) { + dprintk(1,"dqbuf: stream running\n"); goto done; + } buf = list_entry(q->stream.next, struct videobuf_buffer, stream); retval = videobuf_waiton(buf, nonblocking, 1); - if (retval < 0) + if (retval < 0) { + dprintk(1,"dqbuf: waiton returned %d\n",retval); goto done; + } switch (buf->state) { case STATE_ERROR: + dprintk(1,"dqbuf: state is error\n"); retval = -EIO; - /* fall through */ + videobuf_dma_sync(q,&buf->dma); + buf->state = STATE_IDLE; + break; case STATE_DONE: - videobuf_dma_pci_sync(q->pci,&buf->dma); + dprintk(1,"dqbuf: state is done\n"); + videobuf_dma_sync(q,&buf->dma); buf->state = STATE_IDLE; break; default: + dprintk(1,"dqbuf: state invalid\n"); retval = -EINVAL; goto done; } @@ -693,7 +802,7 @@ videobuf_dqbuf(struct videobuf_queue *q, videobuf_status(b,buf,q->type); done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } @@ -701,10 +810,10 @@ int videobuf_streamon(struct videobuf_queue *q) { struct videobuf_buffer *buf; struct list_head *list; - unsigned long flags; + unsigned long flags=0; int retval; - down(&q->lock); + mutex_lock(&q->lock); retval = -EBUSY; if (q->reading) goto done; @@ -712,16 +821,18 @@ int videobuf_streamon(struct videobuf_queue *q) if (q->streaming) goto done; q->streaming = 1; - spin_lock_irqsave(q->irqlock,flags); + if (q->irqlock) + spin_lock_irqsave(q->irqlock,flags); list_for_each(list,&q->stream) { buf = list_entry(list, struct videobuf_buffer, stream); if (buf->state == STATE_PREPARED) q->ops->buf_queue(q,buf); } - spin_unlock_irqrestore(q->irqlock,flags); + if (q->irqlock) + spin_unlock_irqrestore(q->irqlock,flags); done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } @@ -729,7 +840,7 @@ int videobuf_streamoff(struct videobuf_queue *q) { int retval = -EINVAL; - down(&q->lock); + mutex_lock(&q->lock); if (!q->streaming) goto done; videobuf_queue_cancel(q); @@ -737,7 +848,7 @@ int videobuf_streamoff(struct videobuf_queue *q) retval = 0; done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } @@ -746,7 +857,7 @@ videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data, size_t count, loff_t *ppos) { enum v4l2_field field; - unsigned long flags; + unsigned long flags=0; int retval; /* setup stuff */ @@ -763,12 +874,14 @@ videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data, goto done; /* start capture & wait */ - spin_lock_irqsave(q->irqlock,flags); + if (q->irqlock) + spin_lock_irqsave(q->irqlock,flags); q->ops->buf_queue(q,q->read_buf); - spin_unlock_irqrestore(q->irqlock,flags); + if (q->irqlock) + spin_unlock_irqrestore(q->irqlock,flags); retval = videobuf_waiton(q->read_buf,0,0); if (0 == retval) { - videobuf_dma_pci_sync(q->pci,&q->read_buf->dma); + videobuf_dma_sync(q,&q->read_buf->dma); if (STATE_ERROR == q->read_buf->state) retval = -EIO; else @@ -788,11 +901,11 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, int nonblocking) { enum v4l2_field field; - unsigned long flags; + unsigned long flags=0; unsigned size, nbufs, bytes; int retval; - down(&q->lock); + mutex_lock(&q->lock); nbufs = 1; size = 0; q->ops->buf_setup(q,&nbufs,&size); @@ -810,6 +923,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, /* need to capture a new frame */ retval = -ENOMEM; q->read_buf = videobuf_alloc(q->msize); + dprintk(1,"video alloc=0x%08x\n",(unsigned int) q->read_buf); if (NULL == q->read_buf) goto done; q->read_buf->memory = V4L2_MEMORY_USERPTR; @@ -821,9 +935,11 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, q->read_buf = NULL; goto done; } - spin_lock_irqsave(q->irqlock,flags); + if (q->irqlock) + spin_lock_irqsave(q->irqlock,flags); q->ops->buf_queue(q,q->read_buf); - spin_unlock_irqrestore(q->irqlock,flags); + if (q->irqlock) + spin_unlock_irqrestore(q->irqlock,flags); q->read_off = 0; } @@ -831,7 +947,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, retval = videobuf_waiton(q->read_buf, nonblocking, 1); if (0 != retval) goto done; - videobuf_dma_pci_sync(q->pci,&q->read_buf->dma); + videobuf_dma_sync(q,&q->read_buf->dma); if (STATE_ERROR == q->read_buf->state) { /* catch I/O errors */ @@ -860,14 +976,14 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, } done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } int videobuf_read_start(struct videobuf_queue *q) { enum v4l2_field field; - unsigned long flags; + unsigned long flags=0; int count = 0, size = 0; int err, i; @@ -888,10 +1004,12 @@ int videobuf_read_start(struct videobuf_queue *q) return err; list_add_tail(&q->bufs[i]->stream, &q->stream); } - spin_lock_irqsave(q->irqlock,flags); + if (q->irqlock) + spin_lock_irqsave(q->irqlock,flags); for (i = 0; i < count; i++) q->ops->buf_queue(q,q->bufs[i]); - spin_unlock_irqrestore(q->irqlock,flags); + if (q->irqlock) + spin_unlock_irqrestore(q->irqlock,flags); q->reading = 1; return 0; } @@ -919,10 +1037,10 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, { unsigned int *fc, bytes; int err, retval; - unsigned long flags; + unsigned long flags=0; dprintk(2,"%s\n",__FUNCTION__); - down(&q->lock); + mutex_lock(&q->lock); retval = -EBUSY; if (q->streaming) goto done; @@ -986,9 +1104,11 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, if (q->read_off == q->read_buf->size) { list_add_tail(&q->read_buf->stream, &q->stream); - spin_lock_irqsave(q->irqlock,flags); + if (q->irqlock) + spin_lock_irqsave(q->irqlock,flags); q->ops->buf_queue(q,q->read_buf); - spin_unlock_irqrestore(q->irqlock,flags); + if (q->irqlock) + spin_unlock_irqrestore(q->irqlock,flags); q->read_buf = NULL; } if (retval < 0) @@ -996,7 +1116,7 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, } done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } @@ -1007,7 +1127,7 @@ unsigned int videobuf_poll_stream(struct file *file, struct videobuf_buffer *buf = NULL; unsigned int rc = 0; - down(&q->lock); + mutex_lock(&q->lock); if (q->streaming) { if (!list_empty(&q->stream)) buf = list_entry(q->stream.next, @@ -1035,7 +1155,7 @@ unsigned int videobuf_poll_stream(struct file *file, buf->state == STATE_ERROR) rc = POLLIN|POLLRDNORM; } - up(&q->lock); + mutex_unlock(&q->lock); return rc; } @@ -1064,7 +1184,7 @@ videobuf_vm_close(struct vm_area_struct *vma) map->count--; if (0 == map->count) { dprintk(1,"munmap %p q=%p\n",map,q); - down(&q->lock); + mutex_lock(&q->lock); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; @@ -1076,7 +1196,7 @@ videobuf_vm_close(struct vm_area_struct *vma) q->bufs[i]->baddr = 0; q->ops->buf_release(q,q->bufs[i]); } - up(&q->lock); + mutex_unlock(&q->lock); kfree(map); } return; @@ -1170,7 +1290,7 @@ int videobuf_mmap_mapper(struct videobuf_queue *q, unsigned int first,last,size,i; int retval; - down(&q->lock); + mutex_lock(&q->lock); retval = -EINVAL; if (!(vma->vm_flags & VM_WRITE)) { dprintk(1,"mmap app bug: PROT_WRITE please\n"); @@ -1238,7 +1358,7 @@ int videobuf_mmap_mapper(struct videobuf_queue *q, retval = 0; done: - up(&q->lock); + mutex_unlock(&q->lock); return retval; } @@ -1250,11 +1370,14 @@ EXPORT_SYMBOL_GPL(videobuf_dma_init); EXPORT_SYMBOL_GPL(videobuf_dma_init_user); EXPORT_SYMBOL_GPL(videobuf_dma_init_kernel); EXPORT_SYMBOL_GPL(videobuf_dma_init_overlay); -EXPORT_SYMBOL_GPL(videobuf_dma_pci_map); -EXPORT_SYMBOL_GPL(videobuf_dma_pci_sync); -EXPORT_SYMBOL_GPL(videobuf_dma_pci_unmap); +EXPORT_SYMBOL_GPL(videobuf_dma_map); +EXPORT_SYMBOL_GPL(videobuf_dma_sync); +EXPORT_SYMBOL_GPL(videobuf_dma_unmap); EXPORT_SYMBOL_GPL(videobuf_dma_free); +EXPORT_SYMBOL_GPL(videobuf_pci_dma_map); +EXPORT_SYMBOL_GPL(videobuf_pci_dma_unmap); + EXPORT_SYMBOL_GPL(videobuf_alloc); EXPORT_SYMBOL_GPL(videobuf_waiton); EXPORT_SYMBOL_GPL(videobuf_iolock); diff --git a/drivers/media/video/videocodec.h b/drivers/media/video/videocodec.h index b1239ac7f371..8c233720b6a5 100644 --- a/drivers/media/video/videocodec.h +++ b/drivers/media/video/videocodec.h @@ -57,7 +57,7 @@ therfor they may not be initialized. The other fuctions are just for convenience, as they are for sure used by - most/all of the codecs. The last ones may be ommited, too. + most/all of the codecs. The last ones may be ommited, too. See the structure declaration below for more information and which data has to be set up for the master and the slave. @@ -75,52 +75,52 @@ /* ========================================== */ /* - ==== master setup ==== + ==== master setup ==== name -> name of the device structure for reference and debugging master_data -> data ref. for the master (e.g. the zr36055,57,67) readreg -> ref. to read-fn from register (setup by master, used by slave) writereg -> ref. to write-fn to register (setup by master, used by slave) - this two functions do the lowlevel I/O job + this two functions do the lowlevel I/O job - ==== slave functionality setup ==== - slave_data -> data ref. for the slave (e.g. the zr36050,60) + ==== slave functionality setup ==== + slave_data -> data ref. for the slave (e.g. the zr36050,60) check -> fn-ref. checks availability of an device, returns -EIO on failure or - the type on success - this makes espcecially sense if a driver module supports more than - one codec which may be quite similar to access, nevertheless it - is good for a first functionality check + the type on success + this makes espcecially sense if a driver module supports more than + one codec which may be quite similar to access, nevertheless it + is good for a first functionality check - -- main functions you always need for compression/decompression -- + -- main functions you always need for compression/decompression -- set_mode -> this fn-ref. resets the entire codec, and sets up the mode - with the last defined norm/size (or device default if not - available) - it returns 0 if the mode is possible + with the last defined norm/size (or device default if not + available) - it returns 0 if the mode is possible set_size -> this fn-ref. sets the norm and image size for - compression/decompression (returns 0 on success) - the norm param is defined in videodev.h (VIDEO_MODE_*) + compression/decompression (returns 0 on success) + the norm param is defined in videodev.h (VIDEO_MODE_*) additional setup may be available, too - but the codec should work with - some default values even without this + some default values even without this - set_data -> sets device-specific data (tables, quality etc.) - get_data -> query device-specific data (tables, quality etc.) + set_data -> sets device-specific data (tables, quality etc.) + get_data -> query device-specific data (tables, quality etc.) - if the device delivers interrupts, they may be setup/handled here - setup_interrupt -> codec irq setup (not needed for 36050/60) - handle_interrupt -> codec irq handling (not needed for 36050/60) + if the device delivers interrupts, they may be setup/handled here + setup_interrupt -> codec irq setup (not needed for 36050/60) + handle_interrupt -> codec irq handling (not needed for 36050/60) - if the device delivers pictures, they may be handled here - put_image -> puts image data to the codec (not needed for 36050/60) - get_image -> gets image data from the codec (not needed for 36050/60) - the calls include frame numbers and flags (even/odd/...) - if needed and a flag which allows blocking until its ready + if the device delivers pictures, they may be handled here + put_image -> puts image data to the codec (not needed for 36050/60) + get_image -> gets image data from the codec (not needed for 36050/60) + the calls include frame numbers and flags (even/odd/...) + if needed and a flag which allows blocking until its ready */ /* ============== */ /* user interface */ /* ============== */ -/* +/* Currently there is only a information display planned, as the layer is not visible for the user space at all. diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 078880e4c8c0..75e3d41382f2 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -224,13 +224,13 @@ int video_exclusive_open(struct inode *inode, struct file *file) struct video_device *vfl = video_devdata(file); int retval = 0; - down(&vfl->lock); + mutex_lock(&vfl->lock); if (vfl->users) { retval = -EBUSY; } else { vfl->users++; } - up(&vfl->lock); + mutex_unlock(&vfl->lock); return retval; } @@ -279,23 +279,23 @@ int video_register_device(struct video_device *vfd, int type, int nr) switch(type) { case VFL_TYPE_GRABBER: - base=0; - end=64; + base=MINOR_VFL_TYPE_GRABBER_MIN; + end=MINOR_VFL_TYPE_GRABBER_MAX+1; name_base = "video"; break; case VFL_TYPE_VTX: - base=192; - end=224; + base=MINOR_VFL_TYPE_VTX_MIN; + end=MINOR_VFL_TYPE_VTX_MAX+1; name_base = "vtx"; break; case VFL_TYPE_VBI: - base=224; - end=256; + base=MINOR_VFL_TYPE_VBI_MIN; + end=MINOR_VFL_TYPE_VBI_MAX+1; name_base = "vbi"; break; case VFL_TYPE_RADIO: - base=64; - end=128; + base=MINOR_VFL_TYPE_RADIO_MIN; + end=MINOR_VFL_TYPE_RADIO_MAX+1; name_base = "radio"; break; default: @@ -328,7 +328,7 @@ int video_register_device(struct video_device *vfd, int type, int nr) sprintf(vfd->devfs_name, "v4l/%s%d", name_base, i - base); devfs_mk_cdev(MKDEV(VIDEO_MAJOR, vfd->minor), S_IFCHR | S_IRUSR | S_IWUSR, vfd->devfs_name); - init_MUTEX(&vfd->lock); + mutex_init(&vfd->lock); /* sysfs class */ memset(&vfd->class_dev, 0x00, sizeof(vfd->class_dev)); diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index c8fd8238904d..a8c101494cf5 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -42,6 +42,7 @@ #include <linux/videodev.h> #include <linux/videodev2.h> #include <linux/video_decoder.h> +#include <linux/mutex.h> #include <asm/paccess.h> #include <asm/io.h> @@ -245,7 +246,7 @@ struct vino_framebuffer_queue { struct vino_framebuffer *buffer[VINO_FRAMEBUFFER_COUNT_MAX]; spinlock_t queue_lock; - struct semaphore queue_sem; + struct mutex queue_mutex; wait_queue_head_t frame_wait_queue; }; @@ -283,7 +284,7 @@ struct vino_channel_settings { /* the driver is currently processing the queue */ int capturing; - struct semaphore sem; + struct mutex mutex; spinlock_t capture_lock; unsigned int users; @@ -1131,11 +1132,11 @@ static void vino_queue_free(struct vino_framebuffer_queue *q) if (q->type != VINO_MEMORY_MMAP) return; - down(&q->queue_sem); + mutex_lock(&q->queue_mutex); vino_queue_free_with_count(q, q->length); - up(&q->queue_sem); + mutex_unlock(&q->queue_mutex); } static int vino_queue_init(struct vino_framebuffer_queue *q, @@ -1159,7 +1160,7 @@ static int vino_queue_init(struct vino_framebuffer_queue *q, if (*length < 1) return -EINVAL; - down(&q->queue_sem); + mutex_lock(&q->queue_mutex); if (*length > VINO_FRAMEBUFFER_COUNT_MAX) *length = VINO_FRAMEBUFFER_COUNT_MAX; @@ -1211,7 +1212,7 @@ static int vino_queue_init(struct vino_framebuffer_queue *q, q->magic = VINO_QUEUE_MAGIC; } - up(&q->queue_sem); + mutex_unlock(&q->queue_mutex); return ret; } @@ -1554,12 +1555,12 @@ static void vino_update_line_size(struct vino_channel_settings *vcs) unsigned int w = vcs->clipping.right - vcs->clipping.left; unsigned int d = vcs->decimation; unsigned int bpp = vino_data_formats[vcs->data_format].bpp; - unsigned int lsize; + unsigned int lsize; dprintk("update_line_size(): before: w = %d, d = %d, " "line_size = %d\n", w, d, vcs->line_size); - /* line size must be multiple of 8 bytes */ + /* line size must be multiple of 8 bytes */ lsize = (bpp * (w / d)) & ~7; w = (lsize / bpp) * d; @@ -4045,7 +4046,7 @@ static int vino_open(struct inode *inode, struct file *file) dprintk("open(): channel = %c\n", (vcs->channel == VINO_CHANNEL_A) ? 'A' : 'B'); - down(&vcs->sem); + mutex_lock(&vcs->mutex); if (vcs->users) { dprintk("open(): driver busy\n"); @@ -4062,7 +4063,7 @@ static int vino_open(struct inode *inode, struct file *file) vcs->users++; out: - up(&vcs->sem); + mutex_unlock(&vcs->mutex); dprintk("open(): %s!\n", ret ? "failed" : "complete"); @@ -4075,7 +4076,7 @@ static int vino_close(struct inode *inode, struct file *file) struct vino_channel_settings *vcs = video_get_drvdata(dev); dprintk("close():\n"); - down(&vcs->sem); + mutex_lock(&vcs->mutex); vcs->users--; @@ -4087,7 +4088,7 @@ static int vino_close(struct inode *inode, struct file *file) vino_queue_free(&vcs->fb_queue); } - up(&vcs->sem); + mutex_unlock(&vcs->mutex); return 0; } @@ -4130,7 +4131,7 @@ static int vino_mmap(struct file *file, struct vm_area_struct *vma) // TODO: reject mmap if already mapped - if (down_interruptible(&vcs->sem)) + if (mutex_lock_interruptible(&vcs->mutex)) return -EINTR; if (vcs->reading) { @@ -4214,7 +4215,7 @@ found: vma->vm_ops = &vino_vm_ops; out: - up(&vcs->sem); + mutex_unlock(&vcs->mutex); return ret; } @@ -4374,12 +4375,12 @@ static int vino_ioctl(struct inode *inode, struct file *file, struct vino_channel_settings *vcs = video_get_drvdata(dev); int ret; - if (down_interruptible(&vcs->sem)) + if (mutex_lock_interruptible(&vcs->mutex)) return -EINTR; ret = video_usercopy(inode, file, cmd, arg, vino_do_ioctl); - up(&vcs->sem); + mutex_unlock(&vcs->mutex); return ret; } @@ -4564,10 +4565,10 @@ static int vino_init_channel_settings(struct vino_channel_settings *vcs, vcs->capturing = 0; - init_MUTEX(&vcs->sem); + mutex_init(&vcs->mutex); spin_lock_init(&vcs->capture_lock); - init_MUTEX(&vcs->fb_queue.queue_sem); + mutex_init(&vcs->fb_queue.queue_mutex); spin_lock_init(&vcs->fb_queue.queue_lock); init_waitqueue_head(&vcs->fb_queue.frame_wait_queue); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c new file mode 100644 index 000000000000..5e813404d068 --- /dev/null +++ b/drivers/media/video/vivi.c @@ -0,0 +1,1454 @@ +/* + * Virtual Video driver - This code emulates a real video device with v4l2 api + * + * Copyright (c) 2006 by: + * Mauro Carvalho Chehab <mchehab--a.t--infradead.org> + * Ted Walther <ted--a.t--enumera.com> + * John Sokol <sokol--a.t--videotechnology.com> + * http://v4l.videotechnology.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the BSD Licence, GNU General Public License + * as published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/random.h> +#include <linux/version.h> +#include <linux/videodev2.h> +#include <linux/interrupt.h> +#include <media/video-buf.h> +#include <media/v4l2-common.h> +#include <linux/kthread.h> +#include <linux/highmem.h> + +/* Wake up at about 30 fps */ +#define WAKE_NUMERATOR 30 +#define WAKE_DENOMINATOR 1001 +#define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ + +/* These timers are for 1 fps - used only for testing */ +//#define WAKE_DENOMINATOR 30 /* hack for testing purposes */ +//#define BUFFER_TIMEOUT msecs_to_jiffies(5000) /* 5 seconds */ + +#include "font.h" + +#ifndef kzalloc +#define kzalloc(size, flags) \ +({ \ + void *__ret = kmalloc(size, flags); \ + if (__ret) \ + memset(__ret, 0, size); \ + __ret; \ +}) +#endif + +MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board"); +MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol"); +MODULE_LICENSE("Dual BSD/GPL"); + +#define VIVI_MAJOR_VERSION 0 +#define VIVI_MINOR_VERSION 4 +#define VIVI_RELEASE 0 +#define VIVI_VERSION KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE) + +static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ +module_param(video_nr, int, 0); + +static int debug = 0; +module_param(debug, int, 0); + +static unsigned int vid_limit = 16; +module_param(vid_limit,int,0644); +MODULE_PARM_DESC(vid_limit,"capture memory limit in megabytes"); + +/* supported controls */ +static struct v4l2_queryctrl vivi_qctrl[] = { + { + .id = V4L2_CID_AUDIO_VOLUME, + .name = "Volume", + .minimum = 0, + .maximum = 65535, + .step = 65535/100, + .default_value = 65535, + .flags = 0, + .type = V4L2_CTRL_TYPE_INTEGER, + },{ + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 127, + .flags = 0, + }, { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + }, { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 127, + .flags = 0, + }, { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -128, + .maximum = 127, + .step = 0x1, + .default_value = 0, + .flags = 0, + } +}; + +static int qctl_regs[ARRAY_SIZE(vivi_qctrl)]; + +#define dprintk(level,fmt, arg...) \ + do { \ + if (debug >= (level)) \ + printk(KERN_DEBUG "vivi: " fmt , ## arg); \ + } while (0) + +/* ------------------------------------------------------------------ + Basic structures + ------------------------------------------------------------------*/ + +struct vivi_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ + int depth; +}; + +static struct vivi_fmt format = { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, +}; + +struct sg_to_addr { + int pos; + struct scatterlist *sg; +}; + +/* buffer for one video frame */ +struct vivi_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + struct vivi_fmt *fmt; + + struct sg_to_addr *to_addr; +}; + +struct vivi_dmaqueue { + struct list_head active; + struct list_head queued; + struct timer_list timeout; + + /* thread for generating video stream*/ + struct task_struct *kthread; + wait_queue_head_t wq; + /* Counters to control fps rate */ + int frame; + int ini_jiffies; +}; + +static LIST_HEAD(vivi_devlist); + +struct vivi_dev { + struct list_head vivi_devlist; + + struct semaphore lock; + + int users; + + /* various device info */ + unsigned int resources; + struct video_device video_dev; + + struct vivi_dmaqueue vidq; + + /* Several counters */ + int h,m,s,us,jiffies; + char timestr[13]; +}; + +struct vivi_fh { + struct vivi_dev *dev; + + /* video capture */ + struct vivi_fmt *fmt; + unsigned int width,height; + struct videobuf_queue vb_vidq; + + enum v4l2_buf_type type; +}; + +/* ------------------------------------------------------------------ + DMA and thread functions + ------------------------------------------------------------------*/ + +/* Bars and Colors should match positions */ + +enum colors { + WHITE, + AMBAR, + CYAN, + GREEN, + MAGENTA, + RED, + BLUE +}; + +static u8 bars[8][3] = { + /* R G B */ + {204,204,204}, /* white */ + {208,208, 0}, /* ambar */ + { 0,206,206}, /* cyan */ + { 0,239, 0}, /* green */ + {239, 0,239}, /* magenta */ + {205, 0, 0}, /* red */ + { 0, 0,255}, /* blue */ + { 0, 0, 0} +}; + +#define TO_Y(r,g,b) (((16829*r +33039*g +6416*b + 32768)>>16)+16) +/* RGB to V(Cr) Color transform */ +#define TO_V(r,g,b) (((28784*r -24103*g -4681*b + 32768)>>16)+128) +/* RGB to U(Cb) Color transform */ +#define TO_U(r,g,b) (((-9714*r -19070*g +28784*b + 32768)>>16)+128) + +#define TSTAMP_MIN_Y 24 +#define TSTAMP_MAX_Y TSTAMP_MIN_Y+15 +#define TSTAMP_MIN_X 64 + +void prep_to_addr(struct sg_to_addr to_addr[],struct videobuf_buffer *vb) +{ + int i, pos=0; + + for (i=0;i<vb->dma.nr_pages;i++) { + to_addr[i].sg=&vb->dma.sglist[i]; + to_addr[i].pos=pos; + pos += vb->dma.sglist[i].length; + } +} + +inline int get_addr_pos(int pos, int pages, struct sg_to_addr to_addr[]) +{ + int p1=0,p2=pages-1,p3=pages/2; + + /* Sanity test */ + BUG_ON (pos>=to_addr[p2].pos+to_addr[p2].sg->length); + + while (p1+1<p2) { + if (pos < to_addr[p3].pos) { + p2=p3; + } else { + p1=p3; + } + p3=(p1+p2)/2; + } + if (pos >= to_addr[p2].pos) + p1=p2; + + return (p1); +} + +void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax, + int hmax, int line, char *timestr) +{ + int w,i,j,pos=inipos,pgpos,oldpg,y; + char *p,*s,*basep; + struct page *pg; + u8 chr,r,g,b,color; + + /* Get first addr pointed to pixel position */ + oldpg=get_addr_pos(pos,pages,to_addr); + pg=pfn_to_page(to_addr[oldpg].sg->dma_address >> PAGE_SHIFT); + basep = kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[oldpg].sg->offset; + + /* We will just duplicate the second pixel at the packet */ + wmax/=2; + + /* Generate a standard color bar pattern */ + for (w=0;w<wmax;w++) { + r=bars[w*7/wmax][0]; + g=bars[w*7/wmax][1]; + b=bars[w*7/wmax][2]; + + for (color=0;color<4;color++) { + pgpos=get_addr_pos(pos,pages,to_addr); + if (pgpos!=oldpg) { + pg=pfn_to_page(to_addr[pgpos].sg->dma_address >> PAGE_SHIFT); + kunmap_atomic(basep, KM_BOUNCE_READ); + basep= kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[pgpos].sg->offset; + oldpg=pgpos; + } + p=basep+pos-to_addr[pgpos].pos; + + switch (color) { + case 0: + case 2: + *p=TO_Y(r,g,b); /* Luminance */ + break; + case 1: + *p=TO_U(r,g,b); /* Cb */ + break; + case 3: + *p=TO_V(r,g,b); /* Cr */ + break; + } + pos++; + } + } + + /* Checks if it is possible to show timestamp */ + if (TSTAMP_MAX_Y>=hmax) + goto end; + if (TSTAMP_MIN_X+strlen(timestr)>=wmax) + goto end; + + /* Print stream time */ + if (line>=TSTAMP_MIN_Y && line<=TSTAMP_MAX_Y) { + j=TSTAMP_MIN_X; + for (s=timestr;*s;s++) { + chr=rom8x16_bits[(*s-0x30)*16+line-TSTAMP_MIN_Y]; + for (i=0;i<7;i++) { + if (chr&1<<(7-i)) { /* Font color*/ + r=bars[BLUE][0]; + g=bars[BLUE][1]; + b=bars[BLUE][2]; + r=g=b=0; + g=198; + } else { /* Background color */ + r=bars[WHITE][0]; + g=bars[WHITE][1]; + b=bars[WHITE][2]; + r=g=b=0; + } + + pos=inipos+j*2; + for (color=0;color<4;color++) { + pgpos=get_addr_pos(pos,pages,to_addr); + if (pgpos!=oldpg) { + pg=pfn_to_page(to_addr[pgpos]. + sg->dma_address + >> PAGE_SHIFT); + kunmap_atomic(basep, + KM_BOUNCE_READ); + basep= kmap_atomic(pg, + KM_BOUNCE_READ)+ + to_addr[pgpos].sg->offset; + oldpg=pgpos; + } + p=basep+pos-to_addr[pgpos].pos; + + y=TO_Y(r,g,b); + + switch (color) { + case 0: + case 2: + *p=TO_Y(r,g,b); /* Luminance */ + break; + case 1: + *p=TO_U(r,g,b); /* Cb */ + break; + case 3: + *p=TO_V(r,g,b); /* Cr */ + break; + } + pos++; + } + j++; + } + } + } + + +end: + kunmap_atomic(basep, KM_BOUNCE_READ); +} +static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf) +{ + int h,pos=0; + int hmax = buf->vb.height; + int wmax = buf->vb.width; + struct videobuf_buffer *vb=&buf->vb; + struct sg_to_addr *to_addr=buf->to_addr; + struct timeval ts; + + /* Test if DMA mapping is ready */ + if (!vb->dma.sglist[0].dma_address) + return; + + prep_to_addr(to_addr,vb); + + /* Check if there is enough memory */ + BUG_ON(buf->vb.dma.nr_pages << PAGE_SHIFT < (buf->vb.width*buf->vb.height)*2); + + for (h=0;h<hmax;h++) { + gen_line(to_addr,pos,vb->dma.nr_pages,wmax,hmax,h,dev->timestr); + pos += wmax*2; + } + + /* Updates stream time */ + + dev->us+=jiffies_to_usecs(jiffies-dev->jiffies); + dev->jiffies=jiffies; + if (dev->us>=1000000) { + dev->us-=1000000; + dev->s++; + if (dev->s>=60) { + dev->s-=60; + dev->m++; + if (dev->m>60) { + dev->m-=60; + dev->h++; + if (dev->h>24) + dev->h-=24; + } + } + } + sprintf(dev->timestr,"%02d:%02d:%02d:%03d", + dev->h,dev->m,dev->s,(dev->us+500)/1000); + + dprintk(2,"vivifill at %s: Buffer 0x%08lx size= %d\n",dev->timestr, + (unsigned long)buf->vb.dma.vmalloc,pos); + + /* Advice that buffer was filled */ + buf->vb.state = STATE_DONE; + buf->vb.field_count++; + do_gettimeofday(&ts); + buf->vb.ts = ts; + + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); +} + +static int restart_video_queue(struct vivi_dmaqueue *dma_q); + +static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) +{ + struct vivi_buffer *buf; + struct vivi_dev *dev= container_of(dma_q,struct vivi_dev,vidq); + + int bc; + + /* Announces videobuf that all went ok */ + for (bc = 0;; bc++) { + if (list_empty(&dma_q->active)) { + dprintk(1,"No active queue to serve\n"); + break; + } + + buf = list_entry(dma_q->active.next, + struct vivi_buffer, vb.queue); + + /* Nobody is waiting something to be done, just return */ + if (!waitqueue_active(&buf->vb.done)) { + mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); + return; + } + + do_gettimeofday(&buf->vb.ts); + dprintk(2,"[%p/%d] wakeup\n",buf,buf->vb.i); + + /* Fill buffer */ + vivi_fillbuff(dev,buf); + } + if (list_empty(&dma_q->active)) { + del_timer(&dma_q->timeout); + } else { + mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); + } + if (bc != 1) + dprintk(1,"%s: %d buffers handled (should be 1)\n",__FUNCTION__,bc); +} + +void vivi_sleep(struct vivi_dmaqueue *dma_q) +{ + int timeout; + DECLARE_WAITQUEUE(wait, current); + + dprintk(1,"%s dma_q=0x%08lx\n",__FUNCTION__,(unsigned long)dma_q); + + add_wait_queue(&dma_q->wq, &wait); + if (!kthread_should_stop()) { + dma_q->frame++; + + /* Calculate time to wake up */ + timeout=dma_q->ini_jiffies+msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR*1000)/WAKE_DENOMINATOR)-jiffies; + + if (timeout <= 0) { + int old=dma_q->frame; + dma_q->frame=(jiffies_to_msecs(jiffies-dma_q->ini_jiffies)*WAKE_DENOMINATOR)/(WAKE_NUMERATOR*1000)+1; + + timeout=dma_q->ini_jiffies+msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR*1000)/WAKE_DENOMINATOR)-jiffies; + + dprintk(1,"underrun, losed %d frames. " + "Now, frame is %d. Waking on %d jiffies\n", + dma_q->frame-old,dma_q->frame,timeout); + } else + dprintk(1,"will sleep for %i jiffies\n",timeout); + + vivi_thread_tick(dma_q); + + schedule_timeout_interruptible (timeout); + } + + remove_wait_queue(&dma_q->wq, &wait); + try_to_freeze(); +} + +int vivi_thread(void *data) +{ + struct vivi_dmaqueue *dma_q=data; + + dprintk(1,"thread started\n"); + + for (;;) { + vivi_sleep(dma_q); + + if (kthread_should_stop()) + break; + } + dprintk(1, "thread: exit\n"); + return 0; +} + +int vivi_start_thread(struct vivi_dmaqueue *dma_q) +{ + dma_q->frame=0; + dma_q->ini_jiffies=jiffies; + + dprintk(1,"%s\n",__FUNCTION__); + init_waitqueue_head(&dma_q->wq); + + dma_q->kthread = kthread_run(vivi_thread, dma_q, "vivi"); + + if (dma_q->kthread == NULL) { + printk(KERN_ERR "vivi: kernel_thread() failed\n"); + return -EINVAL; + } + dprintk(1,"returning from %s\n",__FUNCTION__); + return 0; +} + +void vivi_stop_thread(struct vivi_dmaqueue *dma_q) +{ + dprintk(1,"%s\n",__FUNCTION__); + /* shutdown control thread */ + if (dma_q->kthread) { + kthread_stop(dma_q->kthread); + dma_q->kthread=NULL; + } +} + +static int restart_video_queue(struct vivi_dmaqueue *dma_q) +{ + struct vivi_buffer *buf, *prev; + struct list_head *item; + + dprintk(1,"%s dma_q=0x%08lx\n",__FUNCTION__,(unsigned long)dma_q); + + if (!list_empty(&dma_q->active)) { + buf = list_entry(dma_q->active.next, struct vivi_buffer, vb.queue); + dprintk(2,"restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + + dprintk(1,"Restarting video dma\n"); + vivi_stop_thread(dma_q); +// vivi_start_thread(dma_q); + + /* cancel all outstanding capture / vbi requests */ + list_for_each(item,&dma_q->active) { + buf = list_entry(item, struct vivi_buffer, vb.queue); + + list_del(&buf->vb.queue); + buf->vb.state = STATE_ERROR; + wake_up(&buf->vb.done); + } + mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); + + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&dma_q->queued)) + return 0; + buf = list_entry(dma_q->queued.next, struct vivi_buffer, vb.queue); + if (NULL == prev) { + list_del(&buf->vb.queue); + list_add_tail(&buf->vb.queue,&dma_q->active); + + dprintk(1,"Restarting video dma\n"); + vivi_stop_thread(dma_q); + vivi_start_thread(dma_q); + + buf->vb.state = STATE_ACTIVE; + mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2,"[%p/%d] restart_queue - first active\n", + buf,buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_del(&buf->vb.queue); + list_add_tail(&buf->vb.queue,&dma_q->active); + buf->vb.state = STATE_ACTIVE; + dprintk(2,"[%p/%d] restart_queue - move to active\n", + buf,buf->vb.i); + } else { + return 0; + } + prev = buf; + } +} + +static void vivi_vid_timeout(unsigned long data) +{ + struct vivi_dev *dev = (struct vivi_dev*)data; + struct vivi_dmaqueue *vidq = &dev->vidq; + struct vivi_buffer *buf; + + while (!list_empty(&vidq->active)) { + buf = list_entry(vidq->active.next, struct vivi_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = STATE_ERROR; + wake_up(&buf->vb.done); + printk("vivi/0: [%p/%d] timeout\n", buf, buf->vb.i); + } + + restart_video_queue(vidq); +} + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ +static int +buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) +{ + struct vivi_fh *fh = vq->priv_data; + + *size = fh->width*fh->height*2; + + if (0 == *count) + *count = 32; + while (*size * *count > vid_limit * 1024 * 1024) + (*count)--; + return 0; +} + +void +free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf) +{ + dprintk(1,"%s\n",__FUNCTION__); + + if (in_interrupt()) + BUG(); + + /*FIXME: Maybe a spinlock is required here */ + kfree(buf->to_addr); + buf->to_addr=NULL; + + videobuf_waiton(&buf->vb,0,0); + videobuf_dma_unmap(vq, &buf->vb.dma); + videobuf_dma_free(&buf->vb.dma); + buf->vb.state = STATE_NEEDS_INIT; +} + +#define norm_maxw() 1024 +#define norm_maxh() 768 +static int +buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vivi_fh *fh = vq->priv_data; + struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb); + int rc, init_buffer = 0; + +// dprintk(1,"%s, field=%d\n",__FUNCTION__,field); + + BUG_ON(NULL == fh->fmt); + if (fh->width < 48 || fh->width > norm_maxw() || + fh->height < 32 || fh->height > norm_maxh()) + return -EINVAL; + buf->vb.size = fh->width*fh->height*2; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + init_buffer = 1; + } + + if (STATE_NEEDS_INIT == buf->vb.state) { + if (0 != (rc = videobuf_iolock(vq,&buf->vb,NULL))) + goto fail; + } + + buf->vb.state = STATE_PREPARED; + + if (NULL == (buf->to_addr = kmalloc(sizeof(*buf->to_addr) * vb->dma.nr_pages,GFP_KERNEL))) { + rc=-ENOMEM; + goto fail; + } + + return 0; + +fail: + free_buffer(vq,buf); + return rc; +} + +static void +buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb); + struct vivi_fh *fh = vq->priv_data; + struct vivi_dev *dev = fh->dev; + struct vivi_dmaqueue *vidq = &dev->vidq; + struct vivi_buffer *prev; + + if (!list_empty(&vidq->queued)) { + dprintk(1,"adding vb queue=0x%08lx\n",(unsigned long)&buf->vb.queue); + list_add_tail(&buf->vb.queue,&vidq->queued); + buf->vb.state = STATE_QUEUED; + dprintk(2,"[%p/%d] buffer_queue - append to queued\n", + buf, buf->vb.i); + } else if (list_empty(&vidq->active)) { + list_add_tail(&buf->vb.queue,&vidq->active); + + buf->vb.state = STATE_ACTIVE; + mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2,"[%p/%d] buffer_queue - first active\n", + buf, buf->vb.i); + + vivi_start_thread(vidq); + } else { + prev = list_entry(vidq->active.prev, struct vivi_buffer, vb.queue); + if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue,&vidq->active); + buf->vb.state = STATE_ACTIVE; + dprintk(2,"[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + + } else { + list_add_tail(&buf->vb.queue,&vidq->queued); + buf->vb.state = STATE_QUEUED; + dprintk(2,"[%p/%d] buffer_queue - first queued\n", + buf, buf->vb.i); + } + } +} + +static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb); + struct vivi_fh *fh = vq->priv_data; + struct vivi_dev *dev = (struct vivi_dev*)fh->dev; + struct vivi_dmaqueue *vidq = &dev->vidq; + + dprintk(1,"%s\n",__FUNCTION__); + + vivi_stop_thread(vidq); + + free_buffer(vq,buf); +} + +int vivi_map_sg (void *dev, struct scatterlist *sg, int nents, + int direction) +{ + int i; + + dprintk(1,"%s, number of pages=%d\n",__FUNCTION__,nents); + BUG_ON(direction == DMA_NONE); + + for (i = 0; i < nents; i++ ) { + BUG_ON(!sg[i].page); + + sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; + } + + return nents; +} + +int vivi_unmap_sg(void *dev,struct scatterlist *sglist,int nr_pages, + int direction) +{ + dprintk(1,"%s\n",__FUNCTION__); + return 0; +} + +int vivi_dma_sync_sg(void *dev,struct scatterlist *sglist,int nr_pages, + int direction) +{ +// dprintk(1,"%s\n",__FUNCTION__); + +// flush_write_buffers(); + return 0; +} + +static struct videobuf_queue_ops vivi_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, + + /* Non-pci handling routines */ + .vb_map_sg = vivi_map_sg, + .vb_dma_sync_sg = vivi_dma_sync_sg, + .vb_unmap_sg = vivi_unmap_sg, +}; + +/* ------------------------------------------------------------------ + IOCTL handling + ------------------------------------------------------------------*/ + +static int vivi_try_fmt(struct vivi_dev *dev, struct vivi_fh *fh, + struct v4l2_format *f) +{ + struct vivi_fmt *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + if (format.fourcc != f->fmt.pix.pixelformat) { + dprintk(1,"Fourcc format invalid.\n"); + return -EINVAL; + } + fmt=&format; + + field = f->fmt.pix.field; + + if (field == V4L2_FIELD_ANY) { +// field=V4L2_FIELD_INTERLACED; + field=V4L2_FIELD_SEQ_TB; + } else if (V4L2_FIELD_INTERLACED != field) { + dprintk(1,"Field type invalid.\n"); + return -EINVAL; + } + + maxw = norm_maxw(); + maxh = norm_maxh(); + + f->fmt.pix.field = field; + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + f->fmt.pix.width &= ~0x03; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int res_get(struct vivi_dev *dev, struct vivi_fh *fh) +{ + /* is it free? */ + down(&dev->lock); + if (dev->resources) { + /* no, someone else uses it */ + up(&dev->lock); + return 0; + } + /* it's free, grab it */ + dev->resources =1; + dprintk(1,"res: get\n"); + up(&dev->lock); + return 1; +} + +static inline int res_locked(struct vivi_dev *dev) +{ + return (dev->resources); +} + +static void res_free(struct vivi_dev *dev, struct vivi_fh *fh) +{ + down(&dev->lock); + dev->resources = 0; + dprintk(1,"res: put\n"); + up(&dev->lock); +} + +static int vivi_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) +{ + struct vivi_fh *fh = file->private_data; + struct vivi_dev *dev = fh->dev; + int ret=0; + + if (debug) { + if (_IOC_DIR(cmd) & _IOC_WRITE) + v4l_printk_ioctl_arg("vivi(w)",cmd, arg); + else if (!_IOC_DIR(cmd) & _IOC_READ) { + v4l_print_ioctl("vivi", cmd); + } + } + + switch(cmd) { + /* --- capabilities ------------------------------------------ */ + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = (struct v4l2_capability*)arg; + + memset(cap, 0, sizeof(*cap)); + + strcpy(cap->driver, "vivi"); + strcpy(cap->card, "vivi"); + cap->version = VIVI_VERSION; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + break; + } + /* --- capture ioctls ---------------------------------------- */ + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *f = arg; + enum v4l2_buf_type type; + unsigned int index; + + index = f->index; + type = f->type; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + + switch (type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (index > 0){ + ret=-EINVAL; + break; + } + memset(f,0,sizeof(*f)); + + f->index = index; + f->type = type; + strlcpy(f->description,format.name,sizeof(f->description)); + f->pixelformat = format.fourcc; + break; + default: + ret=-EINVAL; + } + break; + } + case VIDIOC_G_FMT: + { + struct v4l2_format *f = (struct v4l2_format *)arg; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + + memset(&f->fmt.pix,0,sizeof(f->fmt.pix)); + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vb_vidq.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + break; + } + case VIDIOC_S_FMT: + { + struct v4l2_format *f = arg; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + dprintk(1,"Only capture supported.\n"); + ret=-EINVAL; + break; + } + + ret = vivi_try_fmt(dev,fh,f); + if (ret < 0) + break; + + fh->fmt = &format; + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->vb_vidq.field = f->fmt.pix.field; + fh->type = f->type; + + break; + } + case VIDIOC_TRY_FMT: + { + struct v4l2_format *f = arg; + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + + ret=vivi_try_fmt(dev,fh,f); + break; + } + case VIDIOC_REQBUFS: + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + ret=videobuf_reqbufs(&fh->vb_vidq, arg); + break; + case VIDIOC_QUERYBUF: + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + ret=videobuf_querybuf(&fh->vb_vidq, arg); + break; + case VIDIOC_QBUF: + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + ret=videobuf_qbuf(&fh->vb_vidq, arg); + break; + case VIDIOC_DQBUF: + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + ret=videobuf_dqbuf(&fh->vb_vidq, arg, + file->f_flags & O_NONBLOCK); + break; +#ifdef HAVE_V4L1 + /* --- streaming capture ------------------------------------- */ + case VIDIOCGMBUF: + { + struct video_mbuf *mbuf = arg; + struct videobuf_queue *q=&fh->vb_vidq; + struct v4l2_requestbuffers req; + unsigned int i; + + memset(&req,0,sizeof(req)); + req.type = q->type; + req.count = 8; + req.memory = V4L2_MEMORY_MMAP; + ret = videobuf_reqbufs(q,&req); + if (ret < 0) + break; + memset(mbuf,0,sizeof(*mbuf)); + mbuf->frames = req.count; + mbuf->size = 0; + for (i = 0; i < mbuf->frames; i++) { + mbuf->offsets[i] = q->bufs[i]->boff; + mbuf->size += q->bufs[i]->bsize; + } + break; + } +#endif + case VIDIOC_STREAMON: + { + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (!res_get(dev,fh)) + return -EBUSY; + ret=videobuf_streamon(&fh->vb_vidq); + break; + } + case VIDIOC_STREAMOFF: + { + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + ret=-EINVAL; + break; + } + ret = videobuf_streamoff(&fh->vb_vidq); + if (ret < 0) + break; + res_free(dev,fh); + break; + } + /* ---------- tv norms ---------- */ + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *e = arg; + + if (e->index>0) { + ret=-EINVAL; + break; + } + ret = v4l2_video_std_construct(e, V4L2_STD_NTSC_M, "NTSC-M"); + + /* Allows vivi to use different fps from video std */ + e->frameperiod.numerator = WAKE_NUMERATOR; + e->frameperiod.denominator = WAKE_DENOMINATOR; + + break; + } + case VIDIOC_G_STD: + { + v4l2_std_id *id = arg; + + *id = V4L2_STD_NTSC_M; + break; + } + case VIDIOC_S_STD: + { + break; + } + /* ------ input switching ---------- */ + case VIDIOC_ENUMINPUT: + { /* only one input in this sample driver */ + struct v4l2_input *inp = arg; + + if (inp->index != 0) { + ret=-EINVAL; + break; + } + memset(inp, 0, sizeof(*inp)); + + inp->index = 0; + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = V4L2_STD_NTSC_M; + strcpy(inp->name,"Camera"); + break; + } + case VIDIOC_G_INPUT: + { + unsigned int *i = arg; + + *i = 0; + break; + } + case VIDIOC_S_INPUT: + { + unsigned int *i = arg; + + if (*i > 0) + ret=-EINVAL; + break; + } + + /* --- controls ---------------------------------------------- */ + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *qc = arg; + int i; + + for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++) + if (qc->id && qc->id == vivi_qctrl[i].id) { + memcpy(qc, &(vivi_qctrl[i]), + sizeof(*qc)); + break; + } + + ret=-EINVAL; + break; + } + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + int i; + + for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++) + if (ctrl->id == vivi_qctrl[i].id) { + ctrl->value=qctl_regs[i]; + break; + } + + ret=-EINVAL; + break; + } + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + int i; + for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++) + if (ctrl->id == vivi_qctrl[i].id) { + if (ctrl->value < + vivi_qctrl[i].minimum + || ctrl->value > + vivi_qctrl[i].maximum) { + ret=-ERANGE; + break; + } + qctl_regs[i]=ctrl->value; + break; + } + ret=-EINVAL; + break; + } + default: + ret=v4l_compat_translate_ioctl(inode,file,cmd,arg,vivi_do_ioctl); + } + + if (debug) { + if (ret<0) { + v4l_print_ioctl("vivi(err)", cmd); + dprintk(1,"errcode=%d\n",ret); + } else if (_IOC_DIR(cmd) & _IOC_READ) + v4l_printk_ioctl_arg("vivi(r)",cmd, arg); + } + + return ret; +} + +static int vivi_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + return video_usercopy(inode, file, cmd, arg, vivi_do_ioctl); +} + +/* ------------------------------------------------------------------ + File operations for the device + ------------------------------------------------------------------*/ + +#define line_buf_size(norm) (norm_maxw(norm)*(format.depth+7)/8) + +static int vivi_open(struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct vivi_dev *h,*dev = NULL; + struct vivi_fh *fh; + struct list_head *list; + enum v4l2_buf_type type = 0; + int i; + + printk(KERN_DEBUG "vivi: open called (minor=%d)\n",minor); + + list_for_each(list,&vivi_devlist) { + h = list_entry(list, struct vivi_dev, vivi_devlist); + if (h->video_dev.minor == minor) { + dev = h; + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + } + if (NULL == dev) + return -ENODEV; + + + /* If more than one user, mutex should be added */ + dev->users++; + + dprintk(1,"open minor=%d type=%s users=%d\n", + minor,v4l2_type_names[type],dev->users); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh),GFP_KERNEL); + if (NULL == fh) { + dev->users--; + return -ENOMEM; + } + + file->private_data = fh; + fh->dev = dev; + fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + fh->fmt = &format; + fh->width = 640; + fh->height = 480; + + /* Put all controls at a sane state */ + for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++) + qctl_regs[i] =vivi_qctrl[i].default_value; + + dprintk(1,"Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n", + (unsigned long)fh,(unsigned long)dev,(unsigned long)&dev->vidq); + dprintk(1,"Open: list_empty queued=%d\n",list_empty(&dev->vidq.queued)); + dprintk(1,"Open: list_empty active=%d\n",list_empty(&dev->vidq.active)); + + /* Resets frame counters */ + dev->h=0; + dev->m=0; + dev->s=0; + dev->us=0; + dev->jiffies=jiffies; + sprintf(dev->timestr,"%02d:%02d:%02d:%03d", + dev->h,dev->m,dev->s,(dev->us+500)/1000); + + videobuf_queue_init(&fh->vb_vidq, &vivi_video_qops, + NULL, NULL, + fh->type, + V4L2_FIELD_INTERLACED, + sizeof(struct vivi_buffer),fh); + + return 0; +} + +static ssize_t +vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) +{ + struct vivi_fh *fh = file->private_data; + + if (fh->type==V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (res_locked(fh->dev)) + return -EBUSY; + return videobuf_read_one(&fh->vb_vidq, data, count, ppos, + file->f_flags & O_NONBLOCK); + } + return 0; +} + +static unsigned int +vivi_poll(struct file *file, struct poll_table_struct *wait) +{ + struct vivi_fh *fh = file->private_data; + struct vivi_buffer *buf; + + dprintk(1,"%s\n",__FUNCTION__); + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return POLLERR; + + if (res_get(fh->dev,fh)) { + dprintk(1,"poll: mmap interface\n"); + /* streaming capture */ + if (list_empty(&fh->vb_vidq.stream)) + return POLLERR; + buf = list_entry(fh->vb_vidq.stream.next,struct vivi_buffer,vb.stream); + } else { + dprintk(1,"poll: read() interface\n"); + /* read() capture */ + buf = (struct vivi_buffer*)fh->vb_vidq.read_buf; + if (NULL == buf) + return POLLERR; + } + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == STATE_DONE || + buf->vb.state == STATE_ERROR) + return POLLIN|POLLRDNORM; + return 0; +} + +static int vivi_release(struct inode *inode, struct file *file) +{ + struct vivi_fh *fh = file->private_data; + struct vivi_dev *dev = fh->dev; + struct vivi_dmaqueue *vidq = &dev->vidq; + + int minor = iminor(inode); + + vivi_stop_thread(vidq); + videobuf_mmap_free(&fh->vb_vidq); + + kfree (fh); + + dev->users--; + + printk(KERN_DEBUG "vivi: close called (minor=%d, users=%d)\n",minor,dev->users); + + return 0; +} + +static int +vivi_mmap(struct file *file, struct vm_area_struct * vma) +{ + struct vivi_fh *fh = file->private_data; + int ret; + + dprintk (1,"mmap called, vma=0x%08lx\n",(unsigned long)vma); + + ret=videobuf_mmap_mapper(&fh->vb_vidq, vma); + + dprintk (1,"vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, + ret); + + return ret; +} + +static struct file_operations vivi_fops = { + .owner = THIS_MODULE, + .open = vivi_open, + .release = vivi_release, + .read = vivi_read, + .poll = vivi_poll, + .ioctl = vivi_ioctl, + .mmap = vivi_mmap, + .llseek = no_llseek, +}; + +static struct video_device vivi = { + .name = "VTM Virtual Video Capture Board", + .type = VID_TYPE_CAPTURE, + .hardware = 0, + .fops = &vivi_fops, + .minor = -1, +// .release = video_device_release, +}; +/* ------------------------------------------------------------------ + Initialization and module stuff + ------------------------------------------------------------------*/ + +static int __init vivi_init(void) +{ + int ret; + struct vivi_dev *dev; + + dev = kzalloc(sizeof(*dev),GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + list_add_tail(&dev->vivi_devlist,&vivi_devlist); + + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + + /* initialize locks */ + init_MUTEX(&dev->lock); + + dev->vidq.timeout.function = vivi_vid_timeout; + dev->vidq.timeout.data = (unsigned long)dev; + init_timer(&dev->vidq.timeout); + + ret = video_register_device(&vivi, VFL_TYPE_GRABBER, video_nr); + printk(KERN_INFO "Video Technology Magazine Virtual Video Capture Board (Load status: %d)\n", ret); + return ret; +} + +static void __exit vivi_exit(void) +{ + struct vivi_dev *h; + struct list_head *list; + + list_for_each(list,&vivi_devlist) { + h = list_entry(list, struct vivi_dev, vivi_devlist); + kfree (h); + } + video_unregister_device(&vivi); +} + +module_init(vivi_init); +module_exit(vivi_exit); diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index d0a1e72ea8c4..40b205b91481 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -1,4 +1,4 @@ -/* +/* * vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1 * * Copyright (C) 2001 Laurent Pinchart <lpinchart@freegates.be> @@ -30,7 +30,6 @@ #include <asm/uaccess.h> #include <linux/i2c.h> -#include <linux/i2c-dev.h> #define I2C_NAME(x) (x)->name @@ -177,8 +176,8 @@ vpx3220_write_block (struct i2c_client *client, static int vpx3220_write_fp_block (struct i2c_client *client, - const u16 *data, - unsigned int len) + const u16 *data, + unsigned int len) { u8 reg; int ret = 0; @@ -317,7 +316,7 @@ vpx3220_command (struct i2c_client *client, vpx3220_write_fp_block(client, init_fp, sizeof(init_fp) >> 1); switch (decoder->norm) { - + case VIDEO_MODE_NTSC: vpx3220_write_fp_block(client, init_ntsc, sizeof(init_ntsc) >> 1); @@ -325,7 +324,7 @@ vpx3220_command (struct i2c_client *client, case VIDEO_MODE_PAL: vpx3220_write_fp_block(client, init_pal, - sizeof(init_pal) >> 1); + sizeof(init_pal) >> 1); break; case VIDEO_MODE_SECAM: vpx3220_write_fp_block(client, init_secam, @@ -333,10 +332,10 @@ vpx3220_command (struct i2c_client *client, break; default: vpx3220_write_fp_block(client, init_pal, - sizeof(init_pal) >> 1); + sizeof(init_pal) >> 1); break; } - } + } break; case DECODER_DUMP: @@ -412,7 +411,7 @@ vpx3220_command (struct i2c_client *client, /* Here we back up the input selection because it gets overwritten when we fill the registers with the - choosen video norm */ + choosen video norm */ temp_input = vpx3220_fp_read(client, 0xf2); dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n", @@ -579,7 +578,7 @@ static unsigned short normal_i2c[] = }; static unsigned short ignore = I2C_CLIENT_END; - + static struct i2c_client_address_data addr_data = { .normal_i2c = normal_i2c, .probe = &ignore, @@ -662,7 +661,7 @@ vpx3220_detect_client (struct i2c_adapter *adapter, break; default: dprintk(1, - KERN_INFO + KERN_INFO "%s: Wrong part number (0x%04x)\n", __func__, pn); kfree(client); diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index b7b0afffd214..80ef8a1b8f63 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -26,7 +26,7 @@ Does any other model using the w9966 interface chip exist ? Todo: - + *Add a working EPP mode, since DMA ECP read isn't implemented in the parport drivers. (That's why it's so sloow) @@ -47,9 +47,9 @@ *Probably some bugs that I don't know of Please support me by sending feedback! - + Changes: - + Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE and owner support for newer module locks */ @@ -204,7 +204,7 @@ static struct video_device w9966_template = { */ -// Set camera phase flags, so we know what to uninit when terminating +// Set camera phase flags, so we know what to uninit when terminating static inline void w9966_setState(struct w9966_dev* cam, int mask, int val) { cam->dev_state = (cam->dev_state & ~mask) ^ val; @@ -233,7 +233,7 @@ static inline void w9966_pdev_release(struct w9966_dev* cam) parport_release(cam->pdev); w9966_setState(cam, W9966_STATE_CLAIMED, 0); } - + // Read register from W9966 interface-chip // Expects a claimed pdev // -1 on error, else register data (byte) @@ -242,7 +242,7 @@ static int w9966_rReg(struct w9966_dev* cam, int reg) // ECP, read, regtransfer, REG, REG, REG, REG, REG const unsigned char addr = 0x80 | (reg & 0x1f); unsigned char val; - + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) return -1; if (parport_write(cam->pport, &addr, 1) != 1) @@ -263,7 +263,7 @@ static int w9966_wReg(struct w9966_dev* cam, int reg, int data) // ECP, write, regtransfer, REG, REG, REG, REG, REG const unsigned char addr = 0xc0 | (reg & 0x1f); const unsigned char val = data; - + if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0) return -1; if (parport_write(cam->pport, &addr, 1) != 1) @@ -284,7 +284,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) { if (cam->dev_state != 0) return -1; - + cam->pport = port; cam->brightness = 128; cam->contrast = 64; @@ -302,7 +302,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) cam->ppmode = IEEE1284_MODE_EPP; else cam->ppmode = IEEE1284_MODE_ECP; - break; + break; case 1: // hw- or sw-ecp cam->ppmode = IEEE1284_MODE_ECP; break; @@ -310,7 +310,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) cam->ppmode = IEEE1284_MODE_EPP; break; } - + // Tell the parport driver that we exists cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL); if (cam->pdev == NULL) { @@ -320,7 +320,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) w9966_setState(cam, W9966_STATE_PDEV, W9966_STATE_PDEV); w9966_pdev_claim(cam); - + // Setup a default capture mode if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) { DPRINTF("w9966_setup() failed.\n"); @@ -333,11 +333,11 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device)); cam->vdev.priv = cam; - if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) + if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) return -1; - + w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV); - + // All ok printk( "w9966cf: Found and initialized a webcam on %s.\n", @@ -391,7 +391,7 @@ static int w9966_findlen(int near, int size, int maxlen) // Only continue as long as we keep getting better values if (err > besterr) break; - + besterr = err; bestlen = len; } @@ -399,7 +399,7 @@ static int w9966_findlen(int near, int size, int maxlen) return bestlen; } -// Modify capture window (if necessary) +// Modify capture window (if necessary) // and calculate downscaling // Return -1 on error static int w9966_calcscale(int size, int min, int max, int* beg, int* end, unsigned char* factor) @@ -407,7 +407,7 @@ static int w9966_calcscale(int size, int min, int max, int* beg, int* end, unsig int maxlen = max - min; int len = *end - *beg + 1; int newlen = w9966_findlen(len, size, maxlen); - int err = newlen - len; + int err = newlen - len; // Check for bad format if (newlen > maxlen || newlen < size) @@ -452,8 +452,8 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in 0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0 }; - - + + if (w*h*2 > W9966_SRAMSIZE) { DPRINTF("capture window exceeds SRAM size!.\n"); @@ -469,9 +469,9 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in cam->width = w; cam->height = h; - enh_s = 0; + enh_s = 0; enh_e = w*h*2; - + // Modify capture window if necessary and calculate downscaling if ( w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 || @@ -482,14 +482,14 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in "%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n", w, h, x1, x2, y1, y2, scale_x&~0x80, scale_y&~0x80 ); - + // Setup registers regs[0x00] = 0x00; // Set normal operation regs[0x01] = 0x18; // Capture mode regs[0x02] = scale_y; // V-scaling regs[0x03] = scale_x; // H-scaling - - // Capture window + + // Capture window regs[0x04] = (x1 & 0x0ff); // X-start (8 low bits) regs[0x05] = (x1 & 0x300)>>8; // X-start (2 high bits) regs[0x06] = (y1 & 0x0ff); // Y-start (8 low bits) @@ -499,7 +499,7 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in regs[0x0a] = (y2 & 0x0ff); // Y-end (8 low bits) regs[0x0c] = W9966_SRAMID; // SRAM-banks (1x 128kb) - + // Enhancement layer regs[0x0d] = (enh_s& 0x000ff); // Enh. start (0-7) regs[0x0e] = (enh_s& 0x0ff00)>>8; // Enh. start (8-15) @@ -515,7 +515,7 @@ static int w9966_setup(struct w9966_dev* cam, int x1, int y1, int x2, int y2, in regs[0x19] = 0xff; // I/O port direction control regs[0x1a] = 0xff; // I/O port data register regs[0x1b] = 0x10; // ??? - + // SAA7111 chip settings saa7111_regs[0x0a] = cam->brightness; saa7111_regs[0x0b] = cam->contrast; @@ -551,7 +551,7 @@ static inline void w9966_i2c_setsda(struct w9966_dev* cam, int state) cam->i2c_state |= W9966_I2C_W_DATA; else cam->i2c_state &= ~W9966_I2C_W_DATA; - + w9966_wReg(cam, 0x18, cam->i2c_state); udelay(5); } @@ -577,7 +577,7 @@ static inline int w9966_i2c_setscl(struct w9966_dev* cam, int state) w9966_wReg(cam, 0x18, cam->i2c_state); udelay(5); - + // we go to high, we also expect the peripheral to ack. if (state) { timeout = jiffies + 100; @@ -607,16 +607,16 @@ static int w9966_i2c_wbyte(struct w9966_dev* cam, int data) w9966_i2c_setsda(cam, (data >> i) & 0x01); if (w9966_i2c_setscl(cam, 1) == -1) - return -1; + return -1; w9966_i2c_setscl(cam, 0); } w9966_i2c_setsda(cam, 1); - + if (w9966_i2c_setscl(cam, 1) == -1) return -1; w9966_i2c_setscl(cam, 0); - + return 0; } @@ -626,8 +626,8 @@ static int w9966_i2c_wbyte(struct w9966_dev* cam, int data) static int w9966_i2c_rbyte(struct w9966_dev* cam) { unsigned char data = 0x00; - int i; - + int i; + w9966_i2c_setsda(cam, 1); for (i = 0; i < 8; i++) @@ -637,7 +637,7 @@ static int w9966_i2c_rbyte(struct w9966_dev* cam) data = data << 1; if (w9966_i2c_getsda(cam)) data |= 0x01; - + w9966_i2c_setscl(cam, 0); } return data; @@ -673,11 +673,11 @@ static int w9966_rReg_i2c(struct w9966_dev* cam, int reg) return -1; w9966_i2c_setsda(cam, 0); - + if (w9966_i2c_setscl(cam, 1) == -1) return -1; w9966_i2c_setsda(cam, 1); - + return data; } #endif @@ -699,7 +699,7 @@ static int w9966_wReg_i2c(struct w9966_dev* cam, int reg, int data) w9966_i2c_setsda(cam, 0); if (w9966_i2c_setscl(cam, 1) == -1) return -1; - + w9966_i2c_setsda(cam, 1); return 0; @@ -714,7 +714,7 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, { struct video_device *vdev = video_devdata(file); struct w9966_dev *cam = vdev->priv; - + switch(cmd) { case VIDIOCGCAP: @@ -790,14 +790,14 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, struct video_picture *vpic = arg; if (vpic->depth != 16 || vpic->palette != VIDEO_PALETTE_YUV422) return -EINVAL; - + cam->brightness = vpic->brightness >> 8; cam->hue = (vpic->hue >> 8) - 128; cam->color = vpic->colour >> 9; cam->contrast = vpic->contrast >> 9; w9966_pdev_claim(cam); - + if ( w9966_wReg_i2c(cam, 0x0a, cam->brightness) == -1 || w9966_wReg_i2c(cam, 0x0b, cam->contrast) == -1 || @@ -807,7 +807,7 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, w9966_pdev_release(cam); return -EIO; } - + w9966_pdev_release(cam); return 0; } @@ -815,13 +815,13 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, { int ret; struct video_window *vwin = arg; - + if (vwin->flags != 0) return -EINVAL; if (vwin->clipcount != 0) return -EINVAL; if (vwin->width < 2 || vwin->width > W9966_WND_MAX_W) - return -EINVAL; + return -EINVAL; if (vwin->height < 1 || vwin->height > W9966_WND_MAX_H) return -EINVAL; @@ -829,12 +829,12 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, w9966_pdev_claim(cam); ret = w9966_setup(cam, 0, 0, 1023, 1023, vwin->width, vwin->height); w9966_pdev_release(cam); - + if (ret != 0) { DPRINTF("VIDIOCSWIN: w9966_setup() failed.\n"); return -EIO; } - + return 0; } case VIDIOCGWIN: @@ -846,7 +846,7 @@ static int w9966_v4l_do_ioctl(struct inode *inode, struct file *file, return 0; } // Unimplemented - case VIDIOCCAPTURE: + case VIDIOCCAPTURE: case VIDIOCGFBUF: case VIDIOCSFBUF: case VIDIOCKEY: @@ -877,17 +877,17 @@ static ssize_t w9966_v4l_read(struct file *file, char __user *buf, unsigned char __user *dest = (unsigned char __user *)buf; unsigned long dleft = count; unsigned char *tbuf; - + // Why would anyone want more than this?? if (count > cam->width * cam->height * 2) return -EINVAL; - + w9966_pdev_claim(cam); w9966_wReg(cam, 0x00, 0x02); // Reset ECP-FIFO buffer w9966_wReg(cam, 0x00, 0x00); // Return to normal operation w9966_wReg(cam, 0x01, 0x98); // Enable capture - // write special capture-addr and negotiate into data transfer + // write special capture-addr and negotiate into data transfer if ( (parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0 )|| (parport_write(cam->pport, &addr, 1) != 1 )|| @@ -906,7 +906,7 @@ static ssize_t w9966_v4l_read(struct file *file, char __user *buf, while(dleft > 0) { unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft; - + if (parport_read(cam->pport, tbuf, tsize) < tsize) { count = -EFAULT; goto out; @@ -933,7 +933,7 @@ out: static void w9966_attach(struct parport *port) { int i; - + for (i = 0; i < W9966_MAXCAMS; i++) { if (w9966_cams[i].dev_state != 0) // Cam is already assigned diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c new file mode 100644 index 000000000000..20f211b55ad4 --- /dev/null +++ b/drivers/media/video/w9968cf.c @@ -0,0 +1,3691 @@ +/*************************************************************************** + * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. * + * * + * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * - Memory management code from bttv driver by Ralph Metzler, * + * Marcus Metzler and Gerd Knorr. * + * - I2C interface to kernel, high-level image sensor control routines and * + * some symbolic names from OV511 driver by Mark W. McClelland. * + * - Low-level I2C fast write function by Piotr Czerczak. * + * - Low-level I2C read function by Frederic Jouault. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/ioctl.h> +#include <linux/delay.h> +#include <linux/stddef.h> +#include <asm/page.h> +#include <asm/uaccess.h> +#include <linux/page-flags.h> +#include <linux/moduleparam.h> + +#include "w9968cf.h" +#include "w9968cf_decoder.h" + +static struct w9968cf_vpp_t* w9968cf_vpp; +static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait); + +static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */ +static DEFINE_MUTEX(w9968cf_devlist_mutex); /* semaphore for list traversal */ + +static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */ + + +/**************************************************************************** + * Module macros and parameters * + ****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, winbond_id_table); + +MODULE_AUTHOR(W9968CF_MODULE_AUTHOR" "W9968CF_AUTHOR_EMAIL); +MODULE_DESCRIPTION(W9968CF_MODULE_NAME); +MODULE_VERSION(W9968CF_MODULE_VERSION); +MODULE_LICENSE(W9968CF_MODULE_LICENSE); +MODULE_SUPPORTED_DEVICE("Video"); + +static int ovmod_load = W9968CF_OVMOD_LOAD; +static unsigned short simcams = W9968CF_SIMCAMS; +static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/ +static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_PACKET_SIZE}; +static unsigned short max_buffers[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_BUFFERS}; +static int double_buffer[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_DOUBLE_BUFFER}; +static int clamping[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLAMPING}; +static unsigned short filter_type[]= {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_FILTER_TYPE}; +static int largeview[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_LARGEVIEW}; +static unsigned short decompression[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_DECOMPRESSION}; +static int upscaling[]= {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_UPSCALING}; +static unsigned short force_palette[] = {[0 ... W9968CF_MAX_DEVICES-1] = 0}; +static int force_rgb[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_FORCE_RGB}; +static int autobright[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOBRIGHT}; +static int autoexp[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_AUTOEXP}; +static unsigned short lightfreq[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_LIGHTFREQ}; +static int bandingfilter[] = {[0 ... W9968CF_MAX_DEVICES-1]= + W9968CF_BANDINGFILTER}; +static short clockdiv[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_CLOCKDIV}; +static int backlight[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_BACKLIGHT}; +static int mirror[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_MIRROR}; +static int monochrome[] = {[0 ... W9968CF_MAX_DEVICES-1]=W9968CF_MONOCHROME}; +static unsigned int brightness[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_BRIGHTNESS}; +static unsigned int hue[] = {[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_HUE}; +static unsigned int colour[]={[0 ... W9968CF_MAX_DEVICES-1] = W9968CF_COLOUR}; +static unsigned int contrast[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_CONTRAST}; +static unsigned int whiteness[] = {[0 ... W9968CF_MAX_DEVICES-1] = + W9968CF_WHITENESS}; +#ifdef W9968CF_DEBUG +static unsigned short debug = W9968CF_DEBUG_LEVEL; +static int specific_debug = W9968CF_SPECIFIC_DEBUG; +#endif + +static unsigned int param_nv[24]; /* number of values per parameter */ + +#ifdef CONFIG_KMOD +module_param(ovmod_load, bool, 0644); +#endif +module_param(simcams, ushort, 0644); +module_param_array(video_nr, short, ¶m_nv[0], 0444); +module_param_array(packet_size, uint, ¶m_nv[1], 0444); +module_param_array(max_buffers, ushort, ¶m_nv[2], 0444); +module_param_array(double_buffer, bool, ¶m_nv[3], 0444); +module_param_array(clamping, bool, ¶m_nv[4], 0444); +module_param_array(filter_type, ushort, ¶m_nv[5], 0444); +module_param_array(largeview, bool, ¶m_nv[6], 0444); +module_param_array(decompression, ushort, ¶m_nv[7], 0444); +module_param_array(upscaling, bool, ¶m_nv[8], 0444); +module_param_array(force_palette, ushort, ¶m_nv[9], 0444); +module_param_array(force_rgb, ushort, ¶m_nv[10], 0444); +module_param_array(autobright, bool, ¶m_nv[11], 0444); +module_param_array(autoexp, bool, ¶m_nv[12], 0444); +module_param_array(lightfreq, ushort, ¶m_nv[13], 0444); +module_param_array(bandingfilter, bool, ¶m_nv[14], 0444); +module_param_array(clockdiv, short, ¶m_nv[15], 0444); +module_param_array(backlight, bool, ¶m_nv[16], 0444); +module_param_array(mirror, bool, ¶m_nv[17], 0444); +module_param_array(monochrome, bool, ¶m_nv[18], 0444); +module_param_array(brightness, uint, ¶m_nv[19], 0444); +module_param_array(hue, uint, ¶m_nv[20], 0444); +module_param_array(colour, uint, ¶m_nv[21], 0444); +module_param_array(contrast, uint, ¶m_nv[22], 0444); +module_param_array(whiteness, uint, ¶m_nv[23], 0444); +#ifdef W9968CF_DEBUG +module_param(debug, ushort, 0644); +module_param(specific_debug, bool, 0644); +#endif + +#ifdef CONFIG_KMOD +MODULE_PARM_DESC(ovmod_load, + "\n<0|1> Automatic 'ovcamchip' module loading." + "\n0 disabled, 1 enabled." + "\nIf enabled,'insmod' searches for the required 'ovcamchip'" + "\nmodule in the system, according to its configuration, and" + "\nattempts to load that module automatically. This action is" + "\nperformed once as soon as the 'w9968cf' module is loaded" + "\ninto memory." + "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"." + "\n"); +#endif +MODULE_PARM_DESC(simcams, + "\n<n> Number of cameras allowed to stream simultaneously." + "\nn may vary from 0 to " + __MODULE_STRING(W9968CF_MAX_DEVICES)"." + "\nDefault value is "__MODULE_STRING(W9968CF_SIMCAMS)"." + "\n"); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to "__MODULE_STRING(W9968CF_MAX_DEVICES) + " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second camera and use auto for the first" + "\none and for every other camera." + "\n"); +MODULE_PARM_DESC(packet_size, + "\n<n[,...]> Specify the maximum data payload" + "\nsize in bytes for alternate settings, for each device." + "\nn is scaled between 63 and 1023 " + "(default is "__MODULE_STRING(W9968CF_PACKET_SIZE)")." + "\n"); +MODULE_PARM_DESC(max_buffers, + "\n<n[,...]> For advanced users." + "\nSpecify the maximum number of video frame buffers" + "\nto allocate for each device, from 2 to " + __MODULE_STRING(W9968CF_MAX_BUFFERS) + ". (default is "__MODULE_STRING(W9968CF_BUFFERS)")." + "\n"); +MODULE_PARM_DESC(double_buffer, + "\n<0|1[,...]> " + "Hardware double buffering: 0 disabled, 1 enabled." + "\nIt should be enabled if you want smooth video output: if" + "\nyou obtain out of sync. video, disable it, or try to" + "\ndecrease the 'clockdiv' module parameter value." + "\nDefault value is "__MODULE_STRING(W9968CF_DOUBLE_BUFFER) + " for every device." + "\n"); +MODULE_PARM_DESC(clamping, + "\n<0|1[,...]> Video data clamping: 0 disabled, 1 enabled." + "\nDefault value is "__MODULE_STRING(W9968CF_CLAMPING) + " for every device." + "\n"); +MODULE_PARM_DESC(filter_type, + "\n<0|1|2[,...]> Video filter type." + "\n0 none, 1 (1-2-1) 3-tap filter, " + "2 (2-3-6-3-2) 5-tap filter." + "\nDefault value is "__MODULE_STRING(W9968CF_FILTER_TYPE) + " for every device." + "\nThe filter is used to reduce noise and aliasing artifacts" + "\nproduced by the CCD or CMOS image sensor, and the scaling" + " process." + "\n"); +MODULE_PARM_DESC(largeview, + "\n<0|1[,...]> Large view: 0 disabled, 1 enabled." + "\nDefault value is "__MODULE_STRING(W9968CF_LARGEVIEW) + " for every device." + "\n"); +MODULE_PARM_DESC(upscaling, + "\n<0|1[,...]> Software scaling (for non-compressed video):" + "\n0 disabled, 1 enabled." + "\nDisable it if you have a slow CPU or you don't have" + " enough memory." + "\nDefault value is "__MODULE_STRING(W9968CF_UPSCALING) + " for every device." + "\nIf 'w9968cf-vpp' is not present, this parameter is" + " set to 0." + "\n"); +MODULE_PARM_DESC(decompression, + "\n<0|1|2[,...]> Software video decompression:" + "\n- 0 disables decompression (doesn't allow formats needing" + " decompression)" + "\n- 1 forces decompression (allows formats needing" + " decompression only);" + "\n- 2 allows any permitted formats." + "\nFormats supporting compressed video are YUV422P and" + " YUV420P/YUV420 " + "\nin any resolutions where both width and height are " + "a multiple of 16." + "\nDefault value is "__MODULE_STRING(W9968CF_DECOMPRESSION) + " for every device." + "\nIf 'w9968cf-vpp' is not present, forcing decompression is " + "\nnot allowed; in this case this parameter is set to 2." + "\n"); +MODULE_PARM_DESC(force_palette, + "\n<0" + "|" __MODULE_STRING(VIDEO_PALETTE_UYVY) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV420) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV422P) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV420P) + "|" __MODULE_STRING(VIDEO_PALETTE_YUYV) + "|" __MODULE_STRING(VIDEO_PALETTE_YUV422) + "|" __MODULE_STRING(VIDEO_PALETTE_GREY) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB555) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB565) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB24) + "|" __MODULE_STRING(VIDEO_PALETTE_RGB32) + "[,...]>" + " Force picture palette." + "\nIn order:" + "\n- 0 allows any of the following formats:" + "\n- UYVY 16 bpp - Original video, compression disabled" + "\n- YUV420 12 bpp - Original video, compression enabled" + "\n- YUV422P 16 bpp - Original video, compression enabled" + "\n- YUV420P 12 bpp - Original video, compression enabled" + "\n- YUVY 16 bpp - Software conversion from UYVY" + "\n- YUV422 16 bpp - Software conversion from UYVY" + "\n- GREY 8 bpp - Software conversion from UYVY" + "\n- RGB555 16 bpp - Software conversion from UYVY" + "\n- RGB565 16 bpp - Software conversion from UYVY" + "\n- RGB24 24 bpp - Software conversion from UYVY" + "\n- RGB32 32 bpp - Software conversion from UYVY" + "\nWhen not 0, this parameter will override 'decompression'." + "\nDefault value is 0 for every device." + "\nInitial palette is " + __MODULE_STRING(W9968CF_PALETTE_DECOMP_ON)"." + "\nIf 'w9968cf-vpp' is not present, this parameter is" + " set to 9 (UYVY)." + "\n"); +MODULE_PARM_DESC(force_rgb, + "\n<0|1[,...]> Read RGB video data instead of BGR:" + "\n 1 = use RGB component ordering." + "\n 0 = use BGR component ordering." + "\nThis parameter has effect when using RGBX palettes only." + "\nDefault value is "__MODULE_STRING(W9968CF_FORCE_RGB) + " for every device." + "\n"); +MODULE_PARM_DESC(autobright, + "\n<0|1[,...]> Image sensor automatically changes brightness:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_AUTOBRIGHT) + " for every device." + "\n"); +MODULE_PARM_DESC(autoexp, + "\n<0|1[,...]> Image sensor automatically changes exposure:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_AUTOEXP) + " for every device." + "\n"); +MODULE_PARM_DESC(lightfreq, + "\n<50|60[,...]> Light frequency in Hz:" + "\n 50 for European and Asian lighting," + " 60 for American lighting." + "\nDefault value is "__MODULE_STRING(W9968CF_LIGHTFREQ) + " for every device." + "\n"); +MODULE_PARM_DESC(bandingfilter, + "\n<0|1[,...]> Banding filter to reduce effects of" + " fluorescent lighting:" + "\n 0 disabled, 1 enabled." + "\nThis filter tries to reduce the pattern of horizontal" + "\nlight/dark bands caused by some (usually fluorescent)" + " lighting." + "\nDefault value is "__MODULE_STRING(W9968CF_BANDINGFILTER) + " for every device." + "\n"); +MODULE_PARM_DESC(clockdiv, + "\n<-1|n[,...]> " + "Force pixel clock divisor to a specific value (for experts):" + "\n n may vary from 0 to 127." + "\n -1 for automatic value." + "\nSee also the 'double_buffer' module parameter." + "\nDefault value is "__MODULE_STRING(W9968CF_CLOCKDIV) + " for every device." + "\n"); +MODULE_PARM_DESC(backlight, + "\n<0|1[,...]> Objects are lit from behind:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_BACKLIGHT) + " for every device." + "\n"); +MODULE_PARM_DESC(mirror, + "\n<0|1[,...]> Reverse image horizontally:" + "\n 0 = no, 1 = yes" + "\nDefault value is "__MODULE_STRING(W9968CF_MIRROR) + " for every device." + "\n"); +MODULE_PARM_DESC(monochrome, + "\n<0|1[,...]> Use image sensor as monochrome sensor:" + "\n 0 = no, 1 = yes" + "\nNot all the sensors support monochrome color." + "\nDefault value is "__MODULE_STRING(W9968CF_MONOCHROME) + " for every device." + "\n"); +MODULE_PARM_DESC(brightness, + "\n<n[,...]> Set picture brightness (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_BRIGHTNESS) + " for every device." + "\nThis parameter has no effect if 'autobright' is enabled." + "\n"); +MODULE_PARM_DESC(hue, + "\n<n[,...]> Set picture hue (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_HUE) + " for every device." + "\n"); +MODULE_PARM_DESC(colour, + "\n<n[,...]> Set picture saturation (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_COLOUR) + " for every device." + "\n"); +MODULE_PARM_DESC(contrast, + "\n<n[,...]> Set picture contrast (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_CONTRAST) + " for every device." + "\n"); +MODULE_PARM_DESC(whiteness, + "\n<n[,...]> Set picture whiteness (0-65535)." + "\nDefault value is "__MODULE_STRING(W9968CF_WHITENESS) + " for every device." + "\n"); +#ifdef W9968CF_DEBUG +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 6:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = configuration or general messages" + "\n4 = warnings" + "\n5 = called functions" + "\n6 = function internals" + "\nLevel 5 and 6 are useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(W9968CF_DEBUG_LEVEL)"." + "\n"); +MODULE_PARM_DESC(specific_debug, + "\n<0|1> Enable or disable specific debugging messages:" + "\n0 = print messages concerning every level" + " <= 'debug' level." + "\n1 = print messages concerning the level" + " indicated by 'debug'." + "\nDefault value is " + __MODULE_STRING(W9968CF_SPECIFIC_DEBUG)"." + "\n"); +#endif /* W9968CF_DEBUG */ + + + +/**************************************************************************** + * Some prototypes * + ****************************************************************************/ + +/* Video4linux interface */ +static struct file_operations w9968cf_fops; +static int w9968cf_open(struct inode*, struct file*); +static int w9968cf_release(struct inode*, struct file*); +static int w9968cf_mmap(struct file*, struct vm_area_struct*); +static int w9968cf_ioctl(struct inode*, struct file*, unsigned, unsigned long); +static ssize_t w9968cf_read(struct file*, char __user *, size_t, loff_t*); +static int w9968cf_v4l_ioctl(struct inode*, struct file*, unsigned int, + void __user *); + +/* USB-specific */ +static int w9968cf_start_transfer(struct w9968cf_device*); +static int w9968cf_stop_transfer(struct w9968cf_device*); +static int w9968cf_write_reg(struct w9968cf_device*, u16 value, u16 index); +static int w9968cf_read_reg(struct w9968cf_device*, u16 index); +static int w9968cf_write_fsb(struct w9968cf_device*, u16* data); +static int w9968cf_write_sb(struct w9968cf_device*, u16 value); +static int w9968cf_read_sb(struct w9968cf_device*); +static int w9968cf_upload_quantizationtables(struct w9968cf_device*); +static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs); + +/* Low-level I2C (SMBus) I/O */ +static int w9968cf_smbus_start(struct w9968cf_device*); +static int w9968cf_smbus_stop(struct w9968cf_device*); +static int w9968cf_smbus_write_byte(struct w9968cf_device*, u8 v); +static int w9968cf_smbus_read_byte(struct w9968cf_device*, u8* v); +static int w9968cf_smbus_write_ack(struct w9968cf_device*); +static int w9968cf_smbus_read_ack(struct w9968cf_device*); +static int w9968cf_smbus_refresh_bus(struct w9968cf_device*); +static int w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam, + u16 address, u8* value); +static int w9968cf_i2c_adap_read_byte_data(struct w9968cf_device*, u16 address, + u8 subaddress, u8* value); +static int w9968cf_i2c_adap_write_byte(struct w9968cf_device*, + u16 address, u8 subaddress); +static int w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device*, + u16 address, u8 subaddress, + u8 value); + +/* I2C interface to kernel */ +static int w9968cf_i2c_init(struct w9968cf_device*); +static int w9968cf_i2c_smbus_xfer(struct i2c_adapter*, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data*); +static u32 w9968cf_i2c_func(struct i2c_adapter*); +static int w9968cf_i2c_attach_inform(struct i2c_client*); +static int w9968cf_i2c_detach_inform(struct i2c_client*); +static int w9968cf_i2c_control(struct i2c_adapter*, unsigned int cmd, + unsigned long arg); + +/* Memory management */ +static void* rvmalloc(unsigned long size); +static void rvfree(void *mem, unsigned long size); +static void w9968cf_deallocate_memory(struct w9968cf_device*); +static int w9968cf_allocate_memory(struct w9968cf_device*); + +/* High-level image sensor control functions */ +static int w9968cf_sensor_set_control(struct w9968cf_device*,int cid,int val); +static int w9968cf_sensor_get_control(struct w9968cf_device*,int cid,int *val); +static int w9968cf_sensor_cmd(struct w9968cf_device*, + unsigned int cmd, void *arg); +static int w9968cf_sensor_init(struct w9968cf_device*); +static int w9968cf_sensor_update_settings(struct w9968cf_device*); +static int w9968cf_sensor_get_picture(struct w9968cf_device*); +static int w9968cf_sensor_update_picture(struct w9968cf_device*, + struct video_picture pict); + +/* Other helper functions */ +static void w9968cf_configure_camera(struct w9968cf_device*,struct usb_device*, + enum w9968cf_model_id, + const unsigned short dev_nr); +static void w9968cf_adjust_configuration(struct w9968cf_device*); +static int w9968cf_turn_on_led(struct w9968cf_device*); +static int w9968cf_init_chip(struct w9968cf_device*); +static inline u16 w9968cf_valid_palette(u16 palette); +static inline u16 w9968cf_valid_depth(u16 palette); +static inline u8 w9968cf_need_decompression(u16 palette); +static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture); +static int w9968cf_set_window(struct w9968cf_device*, struct video_window); +static int w9968cf_postprocess_frame(struct w9968cf_device*, + struct w9968cf_frame_t*); +static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h); +static void w9968cf_init_framelist(struct w9968cf_device*); +static void w9968cf_push_frame(struct w9968cf_device*, u8 f_num); +static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**); +static void w9968cf_release_resources(struct w9968cf_device*); + + + +/**************************************************************************** + * Symbolic names * + ****************************************************************************/ + +/* Used to represent a list of values and their respective symbolic names */ +struct w9968cf_symbolic_list { + const int num; + const char *name; +}; + +/*-------------------------------------------------------------------------- + Returns the name of the matching element in the symbolic_list array. The + end of the list must be marked with an element that has a NULL name. + --------------------------------------------------------------------------*/ +static inline const char * +symbolic(struct w9968cf_symbolic_list list[], const int num) +{ + int i; + + for (i = 0; list[i].name != NULL; i++) + if (list[i].num == num) + return (list[i].name); + + return "Unknown"; +} + +static struct w9968cf_symbolic_list camlist[] = { + { W9968CF_MOD_GENERIC, "W996[87]CF JPEG USB Dual Mode Camera" }, + { W9968CF_MOD_CLVBWGP, "Creative Labs Video Blaster WebCam Go Plus" }, + + /* Other cameras (having the same descriptors as Generic W996[87]CF) */ + { W9968CF_MOD_ADPVDMA, "Aroma Digi Pen VGA Dual Mode ADG-5000" }, + { W9986CF_MOD_AAU, "AVerMedia AVerTV USB" }, + { W9968CF_MOD_CLVBWG, "Creative Labs Video Blaster WebCam Go" }, + { W9968CF_MOD_LL, "Lebon LDC-035A" }, + { W9968CF_MOD_EEEMC, "Ezonics EZ-802 EZMega Cam" }, + { W9968CF_MOD_OOE, "OmniVision OV8610-EDE" }, + { W9968CF_MOD_ODPVDMPC, "OPCOM Digi Pen VGA Dual Mode Pen Camera" }, + { W9968CF_MOD_PDPII, "Pretec Digi Pen-II" }, + { W9968CF_MOD_PDP480, "Pretec DigiPen-480" }, + + { -1, NULL } +}; + +static struct w9968cf_symbolic_list senlist[] = { + { CC_OV76BE, "OV76BE" }, + { CC_OV7610, "OV7610" }, + { CC_OV7620, "OV7620" }, + { CC_OV7620AE, "OV7620AE" }, + { CC_OV6620, "OV6620" }, + { CC_OV6630, "OV6630" }, + { CC_OV6630AE, "OV6630AE" }, + { CC_OV6630AF, "OV6630AF" }, + { -1, NULL } +}; + +/* Video4Linux1 palettes */ +static struct w9968cf_symbolic_list v4l1_plist[] = { + { VIDEO_PALETTE_GREY, "GREY" }, + { VIDEO_PALETTE_HI240, "HI240" }, + { VIDEO_PALETTE_RGB565, "RGB565" }, + { VIDEO_PALETTE_RGB24, "RGB24" }, + { VIDEO_PALETTE_RGB32, "RGB32" }, + { VIDEO_PALETTE_RGB555, "RGB555" }, + { VIDEO_PALETTE_YUV422, "YUV422" }, + { VIDEO_PALETTE_YUYV, "YUYV" }, + { VIDEO_PALETTE_UYVY, "UYVY" }, + { VIDEO_PALETTE_YUV420, "YUV420" }, + { VIDEO_PALETTE_YUV411, "YUV411" }, + { VIDEO_PALETTE_RAW, "RAW" }, + { VIDEO_PALETTE_YUV422P, "YUV422P" }, + { VIDEO_PALETTE_YUV411P, "YUV411P" }, + { VIDEO_PALETTE_YUV420P, "YUV420P" }, + { VIDEO_PALETTE_YUV410P, "YUV410P" }, + { -1, NULL } +}; + +/* Decoder error codes: */ +static struct w9968cf_symbolic_list decoder_errlist[] = { + { W9968CF_DEC_ERR_CORRUPTED_DATA, "Corrupted data" }, + { W9968CF_DEC_ERR_BUF_OVERFLOW, "Buffer overflow" }, + { W9968CF_DEC_ERR_NO_SOI, "SOI marker not found" }, + { W9968CF_DEC_ERR_NO_SOF0, "SOF0 marker not found" }, + { W9968CF_DEC_ERR_NO_SOS, "SOS marker not found" }, + { W9968CF_DEC_ERR_NO_EOI, "EOI marker not found" }, + { -1, NULL } +}; + +/* URB error codes: */ +static struct w9968cf_symbolic_list urb_errlist[] = { + { -ENOMEM, "No memory for allocation of internal structures" }, + { -ENOSPC, "The host controller's bandwidth is already consumed" }, + { -ENOENT, "URB was canceled by unlink_urb" }, + { -EXDEV, "ISO transfer only partially completed" }, + { -EAGAIN, "Too match scheduled for the future" }, + { -ENXIO, "URB already queued" }, + { -EFBIG, "Too much ISO frames requested" }, + { -ENOSR, "Buffer error (overrun)" }, + { -EPIPE, "Specified endpoint is stalled (device not responding)"}, + { -EOVERFLOW, "Babble (bad cable?)" }, + { -EPROTO, "Bit-stuff error (bad cable?)" }, + { -EILSEQ, "CRC/Timeout" }, + { -ETIMEDOUT, "NAK (device does not respond)" }, + { -1, NULL } +}; + + + +/**************************************************************************** + * Memory management functions * + ****************************************************************************/ +static void* rvmalloc(unsigned long size) +{ + void* mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + mem = vmalloc_32(size); + if (!mem) + return NULL; + + memset(mem, 0, size); /* Clear the ram out, no junk to the user */ + adr = (unsigned long) mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + + +static void rvfree(void* mem, unsigned long size) +{ + unsigned long adr; + + if (!mem) + return; + + adr = (unsigned long) mem; + while ((long) size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + vfree(mem); +} + + +/*-------------------------------------------------------------------------- + Deallocate previously allocated memory. + --------------------------------------------------------------------------*/ +static void w9968cf_deallocate_memory(struct w9968cf_device* cam) +{ + u8 i; + + /* Free the isochronous transfer buffers */ + for (i = 0; i < W9968CF_URBS; i++) { + kfree(cam->transfer_buffer[i]); + cam->transfer_buffer[i] = NULL; + } + + /* Free temporary frame buffer */ + if (cam->frame_tmp.buffer) { + rvfree(cam->frame_tmp.buffer, cam->frame_tmp.size); + cam->frame_tmp.buffer = NULL; + } + + /* Free helper buffer */ + if (cam->frame_vpp.buffer) { + rvfree(cam->frame_vpp.buffer, cam->frame_vpp.size); + cam->frame_vpp.buffer = NULL; + } + + /* Free video frame buffers */ + if (cam->frame[0].buffer) { + rvfree(cam->frame[0].buffer, cam->nbuffers*cam->frame[0].size); + cam->frame[0].buffer = NULL; + } + + cam->nbuffers = 0; + + DBG(5, "Memory successfully deallocated") +} + + +/*-------------------------------------------------------------------------- + Allocate memory buffers for USB transfers and video frames. + This function is called by open() only. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_allocate_memory(struct w9968cf_device* cam) +{ + const u16 p_size = wMaxPacketSize[cam->altsetting-1]; + void* buff = NULL; + unsigned long hw_bufsize, vpp_bufsize; + u8 i, bpp; + + /* NOTE: Deallocation is done elsewhere in case of error */ + + /* Calculate the max amount of raw data per frame from the device */ + hw_bufsize = cam->maxwidth*cam->maxheight*2; + + /* Calculate the max buf. size needed for post-processing routines */ + bpp = (w9968cf_vpp) ? 4 : 2; + if (cam->upscaling) + vpp_bufsize = max(W9968CF_MAX_WIDTH*W9968CF_MAX_HEIGHT*bpp, + cam->maxwidth*cam->maxheight*bpp); + else + vpp_bufsize = cam->maxwidth*cam->maxheight*bpp; + + /* Allocate memory for the isochronous transfer buffers */ + for (i = 0; i < W9968CF_URBS; i++) { + if (!(cam->transfer_buffer[i] = + kzalloc(W9968CF_ISO_PACKETS*p_size, GFP_KERNEL))) { + DBG(1, "Couldn't allocate memory for the isochronous " + "transfer buffers (%u bytes)", + p_size * W9968CF_ISO_PACKETS) + return -ENOMEM; + } + } + + /* Allocate memory for the temporary frame buffer */ + if (!(cam->frame_tmp.buffer = rvmalloc(hw_bufsize))) { + DBG(1, "Couldn't allocate memory for the temporary " + "video frame buffer (%lu bytes)", hw_bufsize) + return -ENOMEM; + } + cam->frame_tmp.size = hw_bufsize; + cam->frame_tmp.number = -1; + + /* Allocate memory for the helper buffer */ + if (w9968cf_vpp) { + if (!(cam->frame_vpp.buffer = rvmalloc(vpp_bufsize))) { + DBG(1, "Couldn't allocate memory for the helper buffer" + " (%lu bytes)", vpp_bufsize) + return -ENOMEM; + } + cam->frame_vpp.size = vpp_bufsize; + } else + cam->frame_vpp.buffer = NULL; + + /* Allocate memory for video frame buffers */ + cam->nbuffers = cam->max_buffers; + while (cam->nbuffers >= 2) { + if ((buff = rvmalloc(cam->nbuffers * vpp_bufsize))) + break; + else + cam->nbuffers--; + } + + if (!buff) { + DBG(1, "Couldn't allocate memory for the video frame buffers") + cam->nbuffers = 0; + return -ENOMEM; + } + + if (cam->nbuffers != cam->max_buffers) + DBG(2, "Couldn't allocate memory for %u video frame buffers. " + "Only memory for %u buffers has been allocated", + cam->max_buffers, cam->nbuffers) + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].buffer = buff + i*vpp_bufsize; + cam->frame[i].size = vpp_bufsize; + cam->frame[i].number = i; + /* Circular list */ + if (i != cam->nbuffers-1) + cam->frame[i].next = &cam->frame[i+1]; + else + cam->frame[i].next = &cam->frame[0]; + cam->frame[i].status = F_UNUSED; + } + + DBG(5, "Memory successfully allocated") + return 0; +} + + + +/**************************************************************************** + * USB-specific functions * + ****************************************************************************/ + +/*-------------------------------------------------------------------------- + This is an handler function which is called after the URBs are completed. + It collects multiple data packets coming from the camera by putting them + into frame buffers: one or more zero data length data packets are used to + mark the end of a video frame; the first non-zero data packet is the start + of the next video frame; if an error is encountered in a packet, the entire + video frame is discarded and grabbed again. + If there are no requested frames in the FIFO list, packets are collected into + a temporary buffer. + --------------------------------------------------------------------------*/ +static void w9968cf_urb_complete(struct urb *urb, struct pt_regs *regs) +{ + struct w9968cf_device* cam = (struct w9968cf_device*)urb->context; + struct w9968cf_frame_t** f; + unsigned int len, status; + void* pos; + u8 i; + int err = 0; + + if ((!cam->streaming) || cam->disconnected) { + DBG(4, "Got interrupt, but not streaming") + return; + } + + /* "(*f)" will be used instead of "cam->frame_current" */ + f = &cam->frame_current; + + /* If a frame has been requested and we are grabbing into + the temporary frame, we'll switch to that requested frame */ + if ((*f) == &cam->frame_tmp && *cam->requested_frame) { + if (cam->frame_tmp.status == F_GRABBING) { + w9968cf_pop_frame(cam, &cam->frame_current); + (*f)->status = F_GRABBING; + (*f)->length = cam->frame_tmp.length; + memcpy((*f)->buffer, cam->frame_tmp.buffer, + (*f)->length); + DBG(6, "Switched from temp. frame to frame #%d", + (*f)->number) + } + } + + for (i = 0; i < urb->number_of_packets; i++) { + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status && len != 0) { + DBG(4, "URB failed, error in data packet " + "(error #%u, %s)", + status, symbolic(urb_errlist, status)) + (*f)->status = F_ERROR; + continue; + } + + if (len) { /* start of frame */ + + if ((*f)->status == F_UNUSED) { + (*f)->status = F_GRABBING; + (*f)->length = 0; + } + + /* Buffer overflows shouldn't happen, however...*/ + if ((*f)->length + len > (*f)->size) { + DBG(4, "Buffer overflow: bad data packets") + (*f)->status = F_ERROR; + } + + if ((*f)->status == F_GRABBING) { + memcpy((*f)->buffer + (*f)->length, pos, len); + (*f)->length += len; + } + + } else if ((*f)->status == F_GRABBING) { /* end of frame */ + + DBG(6, "Frame #%d successfully grabbed", (*f)->number) + + if (cam->vpp_flag & VPP_DECOMPRESSION) { + err = w9968cf_vpp->check_headers((*f)->buffer, + (*f)->length); + if (err) { + DBG(4, "Skip corrupted frame: %s", + symbolic(decoder_errlist, err)) + (*f)->status = F_UNUSED; + continue; /* grab this frame again */ + } + } + + (*f)->status = F_READY; + (*f)->queued = 0; + + /* Take a pointer to the new frame from the FIFO list. + If the list is empty,we'll use the temporary frame*/ + if (*cam->requested_frame) + w9968cf_pop_frame(cam, &cam->frame_current); + else { + cam->frame_current = &cam->frame_tmp; + (*f)->status = F_UNUSED; + } + + } else if ((*f)->status == F_ERROR) + (*f)->status = F_UNUSED; /* grab it again */ + + PDBGG("Frame length %lu | pack.#%u | pack.len. %u | state %d", + (unsigned long)(*f)->length, i, len, (*f)->status) + + } /* end for */ + + /* Resubmit this URB */ + urb->dev = cam->usbdev; + urb->status = 0; + spin_lock(&cam->urb_lock); + if (cam->streaming) + if ((err = usb_submit_urb(urb, GFP_ATOMIC))) { + cam->misconfigured = 1; + DBG(1, "Couldn't resubmit the URB: error %d, %s", + err, symbolic(urb_errlist, err)) + } + spin_unlock(&cam->urb_lock); + + /* Wake up the user process */ + wake_up_interruptible(&cam->wait_queue); +} + + +/*--------------------------------------------------------------------------- + Setup the URB structures for the isochronous transfer. + Submit the URBs so that the data transfer begins. + Return 0 on success, a negative number otherwise. + ---------------------------------------------------------------------------*/ +static int w9968cf_start_transfer(struct w9968cf_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const u16 p_size = wMaxPacketSize[cam->altsetting-1]; + u16 w, h, d; + int vidcapt; + u32 t_size; + int err = 0; + s8 i, j; + + for (i = 0; i < W9968CF_URBS; i++) { + urb = usb_alloc_urb(W9968CF_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + for (j = 0; j < i; j++) + usb_free_urb(cam->urb[j]); + DBG(1, "Couldn't allocate the URB structures") + return -ENOMEM; + } + + urb->dev = udev; + urb->context = (void*)cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = W9968CF_ISO_PACKETS; + urb->complete = w9968cf_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = p_size*W9968CF_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < W9968CF_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = p_size*j; + urb->iso_frame_desc[j].length = p_size; + } + } + + /* Transfer size per frame, in WORD ! */ + d = cam->hw_depth; + w = cam->hw_width; + h = cam->hw_height; + + t_size = (w*h*d)/16; + + err = w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */ + err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */ + + /* Transfer size */ + err += w9968cf_write_reg(cam, t_size & 0xffff, 0x3d); /* low bits */ + err += w9968cf_write_reg(cam, t_size >> 16, 0x3e); /* high bits */ + + if (cam->vpp_flag & VPP_DECOMPRESSION) + err += w9968cf_upload_quantizationtables(cam); + + vidcapt = w9968cf_read_reg(cam, 0x16); /* read picture settings */ + err += w9968cf_write_reg(cam, vidcapt|0x8000, 0x16); /* capt. enable */ + + err += usb_set_interface(udev, 0, cam->altsetting); + err += w9968cf_write_reg(cam, 0x8a05, 0x3c); /* USB FIFO enable */ + + if (err || (vidcapt < 0)) { + for (i = 0; i < W9968CF_URBS; i++) + usb_free_urb(cam->urb[i]); + DBG(1, "Couldn't tell the camera to start the data transfer") + return err; + } + + w9968cf_init_framelist(cam); + + /* Begin to grab into the temporary buffer */ + cam->frame_tmp.status = F_UNUSED; + cam->frame_tmp.queued = 0; + cam->frame_current = &cam->frame_tmp; + + if (!(cam->vpp_flag & VPP_DECOMPRESSION)) + DBG(5, "Isochronous transfer size: %lu bytes/frame", + (unsigned long)t_size*2) + + DBG(5, "Starting the isochronous transfer...") + + cam->streaming = 1; + + /* Submit the URBs */ + for (i = 0; i < W9968CF_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + cam->streaming = 0; + for (j = i-1; j >= 0; j--) { + usb_kill_urb(cam->urb[j]); + usb_free_urb(cam->urb[j]); + } + DBG(1, "Couldn't send a transfer request to the " + "USB core (error #%d, %s)", err, + symbolic(urb_errlist, err)) + return err; + } + } + + return 0; +} + + +/*-------------------------------------------------------------------------- + Stop the isochronous transfer and set alternate setting to 0 (0Mb/s). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_stop_transfer(struct w9968cf_device* cam) +{ + struct usb_device *udev = cam->usbdev; + unsigned long lock_flags; + int err = 0; + s8 i; + + if (!cam->streaming) + return 0; + + /* This avoids race conditions with usb_submit_urb() + in the URB completition handler */ + spin_lock_irqsave(&cam->urb_lock, lock_flags); + cam->streaming = 0; + spin_unlock_irqrestore(&cam->urb_lock, lock_flags); + + for (i = W9968CF_URBS-1; i >= 0; i--) + if (cam->urb[i]) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + cam->urb[i] = NULL; + } + + if (cam->disconnected) + goto exit; + + err = w9968cf_write_reg(cam, 0x0a05, 0x3c); /* stop USB transfer */ + err += usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + err += w9968cf_write_reg(cam, 0x0000, 0x39); /* disable JPEG encoder */ + err += w9968cf_write_reg(cam, 0x0000, 0x16); /* stop video capture */ + + if (err) { + DBG(2, "Failed to tell the camera to stop the isochronous " + "transfer. However this is not a critical error.") + return -EIO; + } + +exit: + DBG(5, "Isochronous transfer stopped") + return 0; +} + + +/*-------------------------------------------------------------------------- + Write a W9968CF register. + Return 0 on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_write_reg(struct w9968cf_device* cam, u16 value, u16 index) +{ + struct usb_device* udev = cam->usbdev; + int res; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, + value, index, NULL, 0, W9968CF_USB_CTRL_TIMEOUT); + + if (res < 0) + DBG(4, "Failed to write a register " + "(value 0x%04X, index 0x%02X, error #%d, %s)", + value, index, res, symbolic(urb_errlist, res)) + + return (res >= 0) ? 0 : -1; +} + + +/*-------------------------------------------------------------------------- + Read a W9968CF register. + Return the register value on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_read_reg(struct w9968cf_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u16* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 1, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, buff, 2, W9968CF_USB_CTRL_TIMEOUT); + + if (res < 0) + DBG(4, "Failed to read a register " + "(index 0x%02X, error #%d, %s)", + index, res, symbolic(urb_errlist, res)) + + return (res >= 0) ? (int)(*buff) : -1; +} + + +/*-------------------------------------------------------------------------- + Write 64-bit data to the fast serial bus registers. + Return 0 on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_write_fsb(struct w9968cf_device* cam, u16* data) +{ + struct usb_device* udev = cam->usbdev; + u16 value; + int res; + + value = *data++; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, + value, 0x06, data, 6, W9968CF_USB_CTRL_TIMEOUT); + + if (res < 0) + DBG(4, "Failed to write the FSB registers " + "(error #%d, %s)", res, symbolic(urb_errlist, res)) + + return (res >= 0) ? 0 : -1; +} + + +/*-------------------------------------------------------------------------- + Write data to the serial bus control register. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_write_sb(struct w9968cf_device* cam, u16 value) +{ + int err = 0; + + err = w9968cf_write_reg(cam, value, 0x01); + udelay(W9968CF_I2C_BUS_DELAY); + + return err; +} + + +/*-------------------------------------------------------------------------- + Read data from the serial bus control register. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_read_sb(struct w9968cf_device* cam) +{ + int v = 0; + + v = w9968cf_read_reg(cam, 0x01); + udelay(W9968CF_I2C_BUS_DELAY); + + return v; +} + + +/*-------------------------------------------------------------------------- + Upload quantization tables for the JPEG compression. + This function is called by w9968cf_start_transfer(). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_upload_quantizationtables(struct w9968cf_device* cam) +{ + u16 a, b; + int err = 0, i, j; + + err += w9968cf_write_reg(cam, 0x0010, 0x39); /* JPEG clock enable */ + + for (i = 0, j = 0; i < 32; i++, j += 2) { + a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8); + b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8); + err += w9968cf_write_reg(cam, a, 0x40+i); + err += w9968cf_write_reg(cam, b, 0x60+i); + } + err += w9968cf_write_reg(cam, 0x0012, 0x39); /* JPEG encoder enable */ + + return err; +} + + + +/**************************************************************************** + * Low-level I2C I/O functions. * + * The adapter supports the following I2C transfer functions: * + * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only) * + * i2c_adap_read_byte_data() * + * i2c_adap_read_byte() * + ****************************************************************************/ + +static int w9968cf_smbus_start(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ + err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ + + return err; +} + + +static int w9968cf_smbus_stop(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ + err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */ + + return err; +} + + +static int w9968cf_smbus_write_byte(struct w9968cf_device* cam, u8 v) +{ + u8 bit; + int err = 0, sda; + + for (bit = 0 ; bit < 8 ; bit++) { + sda = (v & 0x80) ? 2 : 0; + v <<= 1; + /* SDE=1, SDA=sda, SCL=0 */ + err += w9968cf_write_sb(cam, 0x10 | sda); + /* SDE=1, SDA=sda, SCL=1 */ + err += w9968cf_write_sb(cam, 0x11 | sda); + /* SDE=1, SDA=sda, SCL=0 */ + err += w9968cf_write_sb(cam, 0x10 | sda); + } + + return err; +} + + +static int w9968cf_smbus_read_byte(struct w9968cf_device* cam, u8* v) +{ + u8 bit; + int err = 0; + + *v = 0; + for (bit = 0 ; bit < 8 ; bit++) { + *v <<= 1; + err += w9968cf_write_sb(cam, 0x0013); + *v |= (w9968cf_read_sb(cam) & 0x0008) ? 1 : 0; + err += w9968cf_write_sb(cam, 0x0012); + } + + return err; +} + + +static int w9968cf_smbus_write_ack(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ + err += w9968cf_write_sb(cam, 0x0011); /* SDE=1, SDA=0, SCL=1 */ + err += w9968cf_write_sb(cam, 0x0010); /* SDE=1, SDA=0, SCL=0 */ + + return err; +} + + +static int w9968cf_smbus_read_ack(struct w9968cf_device* cam) +{ + int err = 0, sda; + + err += w9968cf_write_sb(cam, 0x0013); /* SDE=1, SDA=1, SCL=1 */ + sda = (w9968cf_read_sb(cam) & 0x08) ? 1 : 0; /* sda = SDA */ + err += w9968cf_write_sb(cam, 0x0012); /* SDE=1, SDA=1, SCL=0 */ + if (sda < 0) + err += sda; + if (sda == 1) { + DBG(6, "Couldn't receive the ACK") + err += -1; + } + + return err; +} + + +/* This seems to refresh the communication through the serial bus */ +static int w9968cf_smbus_refresh_bus(struct w9968cf_device* cam) +{ + int err = 0, j; + + for (j = 1; j <= 10; j++) { + err = w9968cf_write_reg(cam, 0x0020, 0x01); + err += w9968cf_write_reg(cam, 0x0000, 0x01); + if (err) + break; + } + + return err; +} + + +/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */ +static int +w9968cf_i2c_adap_fastwrite_byte_data(struct w9968cf_device* cam, + u16 address, u8 subaddress,u8 value) +{ + u16* data = cam->data_buffer; + int err = 0; + + err += w9968cf_smbus_refresh_bus(cam); + + /* Enable SBUS outputs */ + err += w9968cf_write_sb(cam, 0x0020); + + data[0] = 0x082f | ((address & 0x80) ? 0x1500 : 0x0); + data[0] |= (address & 0x40) ? 0x4000 : 0x0; + data[1] = 0x2082 | ((address & 0x40) ? 0x0005 : 0x0); + data[1] |= (address & 0x20) ? 0x0150 : 0x0; + data[1] |= (address & 0x10) ? 0x5400 : 0x0; + data[2] = 0x8208 | ((address & 0x08) ? 0x0015 : 0x0); + data[2] |= (address & 0x04) ? 0x0540 : 0x0; + data[2] |= (address & 0x02) ? 0x5000 : 0x0; + data[3] = 0x1d20 | ((address & 0x02) ? 0x0001 : 0x0); + data[3] |= (address & 0x01) ? 0x0054 : 0x0; + + err += w9968cf_write_fsb(cam, data); + + data[0] = 0x8208 | ((subaddress & 0x80) ? 0x0015 : 0x0); + data[0] |= (subaddress & 0x40) ? 0x0540 : 0x0; + data[0] |= (subaddress & 0x20) ? 0x5000 : 0x0; + data[1] = 0x0820 | ((subaddress & 0x20) ? 0x0001 : 0x0); + data[1] |= (subaddress & 0x10) ? 0x0054 : 0x0; + data[1] |= (subaddress & 0x08) ? 0x1500 : 0x0; + data[1] |= (subaddress & 0x04) ? 0x4000 : 0x0; + data[2] = 0x2082 | ((subaddress & 0x04) ? 0x0005 : 0x0); + data[2] |= (subaddress & 0x02) ? 0x0150 : 0x0; + data[2] |= (subaddress & 0x01) ? 0x5400 : 0x0; + data[3] = 0x001d; + + err += w9968cf_write_fsb(cam, data); + + data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0); + data[0] |= (value & 0x40) ? 0x0540 : 0x0; + data[0] |= (value & 0x20) ? 0x5000 : 0x0; + data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0); + data[1] |= (value & 0x10) ? 0x0054 : 0x0; + data[1] |= (value & 0x08) ? 0x1500 : 0x0; + data[1] |= (value & 0x04) ? 0x4000 : 0x0; + data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0); + data[2] |= (value & 0x02) ? 0x0150 : 0x0; + data[2] |= (value & 0x01) ? 0x5400 : 0x0; + data[3] = 0xfe1d; + + err += w9968cf_write_fsb(cam, data); + + /* Disable SBUS outputs */ + err += w9968cf_write_sb(cam, 0x0000); + + if (!err) + DBG(5, "I2C write byte data done, addr.0x%04X, subaddr.0x%02X " + "value 0x%02X", address, subaddress, value) + else + DBG(5, "I2C write byte data failed, addr.0x%04X, " + "subaddr.0x%02X, value 0x%02X", + address, subaddress, value) + + return err; +} + + +/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */ +static int +w9968cf_i2c_adap_read_byte_data(struct w9968cf_device* cam, + u16 address, u8 subaddress, + u8* value) +{ + int err = 0; + + /* Serial data enable */ + err += w9968cf_write_sb(cam, 0x0013); /* don't change ! */ + + err += w9968cf_smbus_start(cam); + err += w9968cf_smbus_write_byte(cam, address); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_write_byte(cam, subaddress); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_stop(cam); + err += w9968cf_smbus_start(cam); + err += w9968cf_smbus_write_byte(cam, address + 1); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_read_byte(cam, value); + err += w9968cf_smbus_write_ack(cam); + err += w9968cf_smbus_stop(cam); + + /* Serial data disable */ + err += w9968cf_write_sb(cam, 0x0000); + + if (!err) + DBG(5, "I2C read byte data done, addr.0x%04X, " + "subaddr.0x%02X, value 0x%02X", + address, subaddress, *value) + else + DBG(5, "I2C read byte data failed, addr.0x%04X, " + "subaddr.0x%02X, wrong value 0x%02X", + address, subaddress, *value) + + return err; +} + + +/* SMBus protocol: S Addr+1 Rd [A] [Value] NA P */ +static int +w9968cf_i2c_adap_read_byte(struct w9968cf_device* cam, + u16 address, u8* value) +{ + int err = 0; + + /* Serial data enable */ + err += w9968cf_write_sb(cam, 0x0013); + + err += w9968cf_smbus_start(cam); + err += w9968cf_smbus_write_byte(cam, address + 1); + err += w9968cf_smbus_read_ack(cam); + err += w9968cf_smbus_read_byte(cam, value); + err += w9968cf_smbus_write_ack(cam); + err += w9968cf_smbus_stop(cam); + + /* Serial data disable */ + err += w9968cf_write_sb(cam, 0x0000); + + if (!err) + DBG(5, "I2C read byte done, addr.0x%04X, " + "value 0x%02X", address, *value) + else + DBG(5, "I2C read byte failed, addr.0x%04X, " + "wrong value 0x%02X", address, *value) + + return err; +} + + +/* SMBus protocol: S Addr Wr [A] Value [A] P */ +static int +w9968cf_i2c_adap_write_byte(struct w9968cf_device* cam, + u16 address, u8 value) +{ + DBG(4, "i2c_write_byte() is an unsupported transfer mode") + return -EINVAL; +} + + + +/**************************************************************************** + * I2C interface to kernel * + ****************************************************************************/ + +static int +w9968cf_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + struct w9968cf_device* cam = i2c_get_adapdata(adapter); + u8 i; + int err = 0; + + switch (addr) { + case OV6xx0_SID: + case OV7xx0_SID: + break; + default: + DBG(4, "Rejected slave ID 0x%04X", addr) + return -EINVAL; + } + + if (size == I2C_SMBUS_BYTE) { + /* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */ + addr <<= 1; + + if (read_write == I2C_SMBUS_WRITE) + err = w9968cf_i2c_adap_write_byte(cam, addr, command); + else if (read_write == I2C_SMBUS_READ) + err = w9968cf_i2c_adap_read_byte(cam,addr,&data->byte); + + } else if (size == I2C_SMBUS_BYTE_DATA) { + addr <<= 1; + + if (read_write == I2C_SMBUS_WRITE) + err = w9968cf_i2c_adap_fastwrite_byte_data(cam, addr, + command, data->byte); + else if (read_write == I2C_SMBUS_READ) { + for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) { + err = w9968cf_i2c_adap_read_byte_data(cam,addr, + command, &data->byte); + if (err) { + if (w9968cf_smbus_refresh_bus(cam)) { + err = -EIO; + break; + } + } else + break; + } + + } else + return -EINVAL; + + } else { + DBG(4, "Unsupported I2C transfer mode (%d)", size) + return -EINVAL; + } + + return err; +} + + +static u32 w9968cf_i2c_func(struct i2c_adapter* adap) +{ + return I2C_FUNC_SMBUS_READ_BYTE | + I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA; +} + + +static int w9968cf_i2c_attach_inform(struct i2c_client* client) +{ + struct w9968cf_device* cam = i2c_get_adapdata(client->adapter); + int id = client->driver->id, err = 0; + + if (id == I2C_DRIVERID_OVCAMCHIP) { + cam->sensor_client = client; + err = w9968cf_sensor_init(cam); + if (err) { + cam->sensor_client = NULL; + return err; + } + } else { + DBG(4, "Rejected client [%s] with driver [%s]", + client->name, client->driver->driver.name) + return -EINVAL; + } + + DBG(5, "I2C attach client [%s] with driver [%s]", + client->name, client->driver->driver.name) + + return 0; +} + + +static int w9968cf_i2c_detach_inform(struct i2c_client* client) +{ + struct w9968cf_device* cam = i2c_get_adapdata(client->adapter); + + if (cam->sensor_client == client) + cam->sensor_client = NULL; + + DBG(5, "I2C detach client [%s]", client->name) + + return 0; +} + + +static int +w9968cf_i2c_control(struct i2c_adapter* adapter, unsigned int cmd, + unsigned long arg) +{ + return 0; +} + + +static int w9968cf_i2c_init(struct w9968cf_device* cam) +{ + int err = 0; + + static struct i2c_algorithm algo = { + .smbus_xfer = w9968cf_i2c_smbus_xfer, + .algo_control = w9968cf_i2c_control, + .functionality = w9968cf_i2c_func, + }; + + static struct i2c_adapter adap = { + .id = I2C_HW_SMBUS_W9968CF, + .class = I2C_CLASS_CAM_DIGITAL, + .owner = THIS_MODULE, + .client_register = w9968cf_i2c_attach_inform, + .client_unregister = w9968cf_i2c_detach_inform, + .algo = &algo, + }; + + memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter)); + strcpy(cam->i2c_adapter.name, "w9968cf"); + i2c_set_adapdata(&cam->i2c_adapter, cam); + + DBG(6, "Registering I2C adapter with kernel...") + + err = i2c_add_adapter(&cam->i2c_adapter); + if (err) + DBG(1, "Failed to register the I2C adapter") + else + DBG(5, "I2C adapter registered") + + return err; +} + + + +/**************************************************************************** + * Helper functions * + ****************************************************************************/ + +/*-------------------------------------------------------------------------- + Turn on the LED on some webcams. A beep should be heard too. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_turn_on_led(struct w9968cf_device* cam) +{ + int err = 0; + + err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power-down */ + err += w9968cf_write_reg(cam, 0xbf17, 0x00); /* reset everything */ + err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* normal operation */ + err += w9968cf_write_reg(cam, 0x0010, 0x01); /* serial bus, SDS high */ + err += w9968cf_write_reg(cam, 0x0000, 0x01); /* serial bus, SDS low */ + err += w9968cf_write_reg(cam, 0x0010, 0x01); /* ..high 'beep-beep' */ + + if (err) + DBG(2, "Couldn't turn on the LED") + + DBG(5, "LED turned on") + + return err; +} + + +/*-------------------------------------------------------------------------- + Write some registers for the device initialization. + This function is called once on open(). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_init_chip(struct w9968cf_device* cam) +{ + unsigned long hw_bufsize = cam->maxwidth*cam->maxheight*2, + y0 = 0x0000, + u0 = y0 + hw_bufsize/2, + v0 = u0 + hw_bufsize/4, + y1 = v0 + hw_bufsize/4, + u1 = y1 + hw_bufsize/2, + v1 = u1 + hw_bufsize/4; + int err = 0; + + err += w9968cf_write_reg(cam, 0xff00, 0x00); /* power off */ + err += w9968cf_write_reg(cam, 0xbf10, 0x00); /* power on */ + + err += w9968cf_write_reg(cam, 0x405d, 0x03); /* DRAM timings */ + err += w9968cf_write_reg(cam, 0x0030, 0x04); /* SDRAM timings */ + + err += w9968cf_write_reg(cam, y0 & 0xffff, 0x20); /* Y buf.0, low */ + err += w9968cf_write_reg(cam, y0 >> 16, 0x21); /* Y buf.0, high */ + err += w9968cf_write_reg(cam, u0 & 0xffff, 0x24); /* U buf.0, low */ + err += w9968cf_write_reg(cam, u0 >> 16, 0x25); /* U buf.0, high */ + err += w9968cf_write_reg(cam, v0 & 0xffff, 0x28); /* V buf.0, low */ + err += w9968cf_write_reg(cam, v0 >> 16, 0x29); /* V buf.0, high */ + + err += w9968cf_write_reg(cam, y1 & 0xffff, 0x22); /* Y buf.1, low */ + err += w9968cf_write_reg(cam, y1 >> 16, 0x23); /* Y buf.1, high */ + err += w9968cf_write_reg(cam, u1 & 0xffff, 0x26); /* U buf.1, low */ + err += w9968cf_write_reg(cam, u1 >> 16, 0x27); /* U buf.1, high */ + err += w9968cf_write_reg(cam, v1 & 0xffff, 0x2a); /* V buf.1, low */ + err += w9968cf_write_reg(cam, v1 >> 16, 0x2b); /* V buf.1, high */ + + err += w9968cf_write_reg(cam, y1 & 0xffff, 0x32); /* JPEG buf 0 low */ + err += w9968cf_write_reg(cam, y1 >> 16, 0x33); /* JPEG buf 0 high */ + + err += w9968cf_write_reg(cam, y1 & 0xffff, 0x34); /* JPEG buf 1 low */ + err += w9968cf_write_reg(cam, y1 >> 16, 0x35); /* JPEG bug 1 high */ + + err += w9968cf_write_reg(cam, 0x0000, 0x36);/* JPEG restart interval */ + err += w9968cf_write_reg(cam, 0x0804, 0x37);/*JPEG VLE FIFO threshold*/ + err += w9968cf_write_reg(cam, 0x0000, 0x38);/* disable hw up-scaling */ + err += w9968cf_write_reg(cam, 0x0000, 0x3f); /* JPEG/MCTL test data */ + + err += w9968cf_set_picture(cam, cam->picture); /* this before */ + err += w9968cf_set_window(cam, cam->window); + + if (err) + DBG(1, "Chip initialization failed") + else + DBG(5, "Chip successfully initialized") + + return err; +} + + +/*-------------------------------------------------------------------------- + Return non-zero if the palette is supported, 0 otherwise. + --------------------------------------------------------------------------*/ +static inline u16 w9968cf_valid_palette(u16 palette) +{ + u8 i = 0; + while (w9968cf_formatlist[i].palette != 0) { + if (palette == w9968cf_formatlist[i].palette) + return palette; + i++; + } + return 0; +} + + +/*-------------------------------------------------------------------------- + Return the depth corresponding to the given palette. + Palette _must_ be supported ! + --------------------------------------------------------------------------*/ +static inline u16 w9968cf_valid_depth(u16 palette) +{ + u8 i=0; + while (w9968cf_formatlist[i].palette != palette) + i++; + + return w9968cf_formatlist[i].depth; +} + + +/*-------------------------------------------------------------------------- + Return non-zero if the format requires decompression, 0 otherwise. + --------------------------------------------------------------------------*/ +static inline u8 w9968cf_need_decompression(u16 palette) +{ + u8 i = 0; + while (w9968cf_formatlist[i].palette != 0) { + if (palette == w9968cf_formatlist[i].palette) + return w9968cf_formatlist[i].compression; + i++; + } + return 0; +} + + +/*-------------------------------------------------------------------------- + Change the picture settings of the camera. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_set_picture(struct w9968cf_device* cam, struct video_picture pict) +{ + u16 fmt, hw_depth, hw_palette, reg_v = 0x0000; + int err = 0; + + /* Make sure we are using a valid depth */ + pict.depth = w9968cf_valid_depth(pict.palette); + + fmt = pict.palette; + + hw_depth = pict.depth; /* depth used by the winbond chip */ + hw_palette = pict.palette; /* palette used by the winbond chip */ + + /* VS & HS polarities */ + reg_v = (cam->vs_polarity << 12) | (cam->hs_polarity << 11); + + switch (fmt) + { + case VIDEO_PALETTE_UYVY: + reg_v |= 0x0000; + cam->vpp_flag = VPP_NONE; + break; + case VIDEO_PALETTE_YUV422P: + reg_v |= 0x0002; + cam->vpp_flag = VPP_DECOMPRESSION; + break; + case VIDEO_PALETTE_YUV420: + case VIDEO_PALETTE_YUV420P: + reg_v |= 0x0003; + cam->vpp_flag = VPP_DECOMPRESSION; + break; + case VIDEO_PALETTE_YUYV: + case VIDEO_PALETTE_YUV422: + reg_v |= 0x0000; + cam->vpp_flag = VPP_SWAP_YUV_BYTES; + hw_palette = VIDEO_PALETTE_UYVY; + break; + /* Original video is used instead of RGBX palettes. + Software conversion later. */ + case VIDEO_PALETTE_GREY: + case VIDEO_PALETTE_RGB555: + case VIDEO_PALETTE_RGB565: + case VIDEO_PALETTE_RGB24: + case VIDEO_PALETTE_RGB32: + reg_v |= 0x0000; /* UYVY 16 bit is used */ + hw_depth = 16; + hw_palette = VIDEO_PALETTE_UYVY; + cam->vpp_flag = VPP_UYVY_TO_RGBX; + break; + } + + /* NOTE: due to memory issues, it is better to disable the hardware + double buffering during compression */ + if (cam->double_buffer && !(cam->vpp_flag & VPP_DECOMPRESSION)) + reg_v |= 0x0080; + + if (cam->clamping) + reg_v |= 0x0020; + + if (cam->filter_type == 1) + reg_v |= 0x0008; + else if (cam->filter_type == 2) + reg_v |= 0x000c; + + if ((err = w9968cf_write_reg(cam, reg_v, 0x16))) + goto error; + + if ((err = w9968cf_sensor_update_picture(cam, pict))) + goto error; + + /* If all went well, update the device data structure */ + memcpy(&cam->picture, &pict, sizeof(pict)); + cam->hw_depth = hw_depth; + cam->hw_palette = hw_palette; + + /* Settings changed, so we clear the frame buffers */ + memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size); + + DBG(4, "Palette is %s, depth is %u bpp", + symbolic(v4l1_plist, pict.palette), pict.depth) + + return 0; + +error: + DBG(1, "Failed to change picture settings") + return err; +} + + +/*-------------------------------------------------------------------------- + Change the capture area size of the camera. + This function _must_ be called _after_ w9968cf_set_picture(). + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_set_window(struct w9968cf_device* cam, struct video_window win) +{ + u16 x, y, w, h, scx, scy, cw, ch, ax, ay; + unsigned long fw, fh; + struct ovcamchip_window s_win; + int err = 0; + + /* Work around to avoid FP arithmetics */ + #define __SC(x) ((x) << 10) + #define __UNSC(x) ((x) >> 10) + + /* Make sure we are using a supported resolution */ + if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, + (u16*)&win.height))) + goto error; + + /* Scaling factors */ + fw = __SC(win.width) / cam->maxwidth; + fh = __SC(win.height) / cam->maxheight; + + /* Set up the width and height values used by the chip */ + if ((win.width > cam->maxwidth) || (win.height > cam->maxheight)) { + cam->vpp_flag |= VPP_UPSCALE; + /* Calculate largest w,h mantaining the same w/h ratio */ + w = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh; + h = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight; + if (w < cam->minwidth) /* just in case */ + w = cam->minwidth; + if (h < cam->minheight) /* just in case */ + h = cam->minheight; + } else { + cam->vpp_flag &= ~VPP_UPSCALE; + w = win.width; + h = win.height; + } + + /* x,y offsets of the cropped area */ + scx = cam->start_cropx; + scy = cam->start_cropy; + + /* Calculate cropped area manteining the right w/h ratio */ + if (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) { + cw = (fw >= fh) ? cam->maxwidth : __SC(win.width)/fh; + ch = (fw >= fh) ? __SC(win.height)/fw : cam->maxheight; + } else { + cw = w; + ch = h; + } + + /* Setup the window of the sensor */ + s_win.format = VIDEO_PALETTE_UYVY; + s_win.width = cam->maxwidth; + s_win.height = cam->maxheight; + s_win.quarter = 0; /* full progressive video */ + + /* Center it */ + s_win.x = (s_win.width - cw) / 2; + s_win.y = (s_win.height - ch) / 2; + + /* Clock divisor */ + if (cam->clockdiv >= 0) + s_win.clockdiv = cam->clockdiv; /* manual override */ + else + switch (cam->sensor) { + case CC_OV6620: + s_win.clockdiv = 0; + break; + case CC_OV6630: + s_win.clockdiv = 0; + break; + case CC_OV76BE: + case CC_OV7610: + case CC_OV7620: + s_win.clockdiv = 0; + break; + default: + s_win.clockdiv = W9968CF_DEF_CLOCKDIVISOR; + } + + /* We have to scale win.x and win.y offsets */ + if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) + || (cam->vpp_flag & VPP_UPSCALE) ) { + ax = __SC(win.x)/fw; + ay = __SC(win.y)/fh; + } else { + ax = win.x; + ay = win.y; + } + + if ((ax + cw) > cam->maxwidth) + ax = cam->maxwidth - cw; + + if ((ay + ch) > cam->maxheight) + ay = cam->maxheight - ch; + + /* Adjust win.x, win.y */ + if ( (cam->largeview && !(cam->vpp_flag & VPP_UPSCALE)) + || (cam->vpp_flag & VPP_UPSCALE) ) { + win.x = __UNSC(ax*fw); + win.y = __UNSC(ay*fh); + } else { + win.x = ax; + win.y = ay; + } + + /* Offsets used by the chip */ + x = ax + s_win.x; + y = ay + s_win.y; + + /* Go ! */ + if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_MODE, &s_win))) + goto error; + + err += w9968cf_write_reg(cam, scx + x, 0x10); + err += w9968cf_write_reg(cam, scy + y, 0x11); + err += w9968cf_write_reg(cam, scx + x + cw, 0x12); + err += w9968cf_write_reg(cam, scy + y + ch, 0x13); + err += w9968cf_write_reg(cam, w, 0x14); + err += w9968cf_write_reg(cam, h, 0x15); + + /* JPEG width & height */ + err += w9968cf_write_reg(cam, w, 0x30); + err += w9968cf_write_reg(cam, h, 0x31); + + /* Y & UV frame buffer strides (in WORD) */ + if (cam->vpp_flag & VPP_DECOMPRESSION) { + err += w9968cf_write_reg(cam, w/2, 0x2c); + err += w9968cf_write_reg(cam, w/4, 0x2d); + } else + err += w9968cf_write_reg(cam, w, 0x2c); + + if (err) + goto error; + + /* If all went well, update the device data structure */ + memcpy(&cam->window, &win, sizeof(win)); + cam->hw_width = w; + cam->hw_height = h; + + /* Settings changed, so we clear the frame buffers */ + memset(cam->frame[0].buffer, 0, cam->nbuffers*cam->frame[0].size); + + DBG(4, "The capture area is %dx%d, Offset (x,y)=(%u,%u)", + win.width, win.height, win.x, win.y) + + PDBGG("x=%u ,y=%u, w=%u, h=%u, ax=%u, ay=%u, s_win.x=%u, s_win.y=%u, " + "cw=%u, ch=%u, win.x=%u, win.y=%u, win.width=%u, win.height=%u", + x, y, w, h, ax, ay, s_win.x, s_win.y, cw, ch, win.x, win.y, + win.width, win.height) + + return 0; + +error: + DBG(1, "Failed to change the capture area size") + return err; +} + + +/*-------------------------------------------------------------------------- + Adjust the asked values for window width and height. + Return 0 on success, -1 otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_adjust_window_size(struct w9968cf_device* cam, u16* width, u16* height) +{ + u16 maxw, maxh; + + if ((*width < cam->minwidth) || (*height < cam->minheight)) + return -ERANGE; + + maxw = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && + w9968cf_vpp ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) + : cam->maxwidth; + maxh = cam->upscaling && !(cam->vpp_flag & VPP_DECOMPRESSION) && + w9968cf_vpp ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) + : cam->maxheight; + + if (*width > maxw) + *width = maxw; + if (*height > maxh) + *height = maxh; + + if (cam->vpp_flag & VPP_DECOMPRESSION) { + *width &= ~15L; /* multiple of 16 */ + *height &= ~15L; + } + + PDBGG("Window size adjusted w=%u, h=%u ", *width, *height) + + return 0; +} + + +/*-------------------------------------------------------------------------- + Initialize the FIFO list of requested frames. + --------------------------------------------------------------------------*/ +static void w9968cf_init_framelist(struct w9968cf_device* cam) +{ + u8 i; + + for (i = 0; i < cam->nbuffers; i++) { + cam->requested_frame[i] = NULL; + cam->frame[i].queued = 0; + cam->frame[i].status = F_UNUSED; + } +} + + +/*-------------------------------------------------------------------------- + Add a frame in the FIFO list of requested frames. + This function is called in process context. + --------------------------------------------------------------------------*/ +static void w9968cf_push_frame(struct w9968cf_device* cam, u8 f_num) +{ + u8 f; + unsigned long lock_flags; + + spin_lock_irqsave(&cam->flist_lock, lock_flags); + + for (f=0; cam->requested_frame[f] != NULL; f++); + cam->requested_frame[f] = &cam->frame[f_num]; + cam->frame[f_num].queued = 1; + cam->frame[f_num].status = F_UNUSED; /* clear the status */ + + spin_unlock_irqrestore(&cam->flist_lock, lock_flags); + + DBG(6, "Frame #%u pushed into the FIFO list. Position %u", f_num, f) +} + + +/*-------------------------------------------------------------------------- + Read, store and remove the first pointer in the FIFO list of requested + frames. This function is called in interrupt context. + --------------------------------------------------------------------------*/ +static void +w9968cf_pop_frame(struct w9968cf_device* cam, struct w9968cf_frame_t** framep) +{ + u8 i; + + spin_lock(&cam->flist_lock); + + *framep = cam->requested_frame[0]; + + /* Shift the list of pointers */ + for (i = 0; i < cam->nbuffers-1; i++) + cam->requested_frame[i] = cam->requested_frame[i+1]; + cam->requested_frame[i] = NULL; + + spin_unlock(&cam->flist_lock); + + DBG(6,"Popped frame #%d from the list", (*framep)->number) +} + + +/*-------------------------------------------------------------------------- + High-level video post-processing routine on grabbed frames. + Return 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_postprocess_frame(struct w9968cf_device* cam, + struct w9968cf_frame_t* fr) +{ + void *pIn = fr->buffer, *pOut = cam->frame_vpp.buffer, *tmp; + u16 w = cam->window.width, + h = cam->window.height, + d = cam->picture.depth, + fmt = cam->picture.palette, + rgb = cam->force_rgb, + hw_w = cam->hw_width, + hw_h = cam->hw_height, + hw_d = cam->hw_depth; + int err = 0; + + #define _PSWAP(pIn, pOut) {tmp = (pIn); (pIn) = (pOut); (pOut) = tmp;} + + if (cam->vpp_flag & VPP_DECOMPRESSION) { + memcpy(pOut, pIn, fr->length); + _PSWAP(pIn, pOut) + err = w9968cf_vpp->decode(pIn, fr->length, hw_w, hw_h, pOut); + PDBGG("Compressed frame length: %lu",(unsigned long)fr->length) + fr->length = (hw_w*hw_h*hw_d)/8; + _PSWAP(pIn, pOut) + if (err) { + DBG(4, "An error occurred while decoding the frame: " + "%s", symbolic(decoder_errlist, err)) + return err; + } else + DBG(6, "Frame decoded") + } + + if (cam->vpp_flag & VPP_SWAP_YUV_BYTES) { + w9968cf_vpp->swap_yuvbytes(pIn, fr->length); + DBG(6, "Original UYVY component ordering changed") + } + + if (cam->vpp_flag & VPP_UPSCALE) { + w9968cf_vpp->scale_up(pIn, pOut, hw_w, hw_h, hw_d, w, h); + fr->length = (w*h*hw_d)/8; + _PSWAP(pIn, pOut) + DBG(6, "Vertical up-scaling done: %u,%u,%ubpp->%u,%u", + hw_w, hw_h, hw_d, w, h) + } + + if (cam->vpp_flag & VPP_UYVY_TO_RGBX) { + w9968cf_vpp->uyvy_to_rgbx(pIn, fr->length, pOut, fmt, rgb); + fr->length = (w*h*d)/8; + _PSWAP(pIn, pOut) + DBG(6, "UYVY-16bit to %s conversion done", + symbolic(v4l1_plist, fmt)) + } + + if (pOut == fr->buffer) + memcpy(fr->buffer, cam->frame_vpp.buffer, fr->length); + + return 0; +} + + + +/**************************************************************************** + * Image sensor control routines * + ****************************************************************************/ + +static int +w9968cf_sensor_set_control(struct w9968cf_device* cam, int cid, int val) +{ + struct ovcamchip_control ctl; + int err; + + ctl.id = cid; + ctl.value = val; + + err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_S_CTRL, &ctl); + + return err; +} + + +static int +w9968cf_sensor_get_control(struct w9968cf_device* cam, int cid, int* val) +{ + struct ovcamchip_control ctl; + int err; + + ctl.id = cid; + + err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_G_CTRL, &ctl); + if (!err) + *val = ctl.value; + + return err; +} + + +static int +w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg) +{ + struct i2c_client* c = cam->sensor_client; + int rc = 0; + + if (!c || !c->driver || !c->driver->command) + return -EINVAL; + + rc = c->driver->command(c, cmd, arg); + /* The I2C driver returns -EPERM on non-supported controls */ + return (rc < 0 && rc != -EPERM) ? rc : 0; +} + + +/*-------------------------------------------------------------------------- + Update some settings of the image sensor. + Returns: 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_sensor_update_settings(struct w9968cf_device* cam) +{ + int err = 0; + + /* Auto brightness */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOBRIGHT, + cam->auto_brt); + if (err) + return err; + + /* Auto exposure */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_AUTOEXP, + cam->auto_exp); + if (err) + return err; + + /* Banding filter */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BANDFILT, + cam->bandfilt); + if (err) + return err; + + /* Light frequency */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_FREQ, + cam->lightfreq); + if (err) + return err; + + /* Back light */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BACKLIGHT, + cam->backlight); + if (err) + return err; + + /* Mirror */ + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_MIRROR, + cam->mirror); + if (err) + return err; + + return 0; +} + + +/*-------------------------------------------------------------------------- + Get some current picture settings from the image sensor and update the + internal 'picture' structure of the camera. + Returns: 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_sensor_get_picture(struct w9968cf_device* cam) +{ + int err, v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_CONT, &v); + if (err) + return err; + cam->picture.contrast = v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_BRIGHT, &v); + if (err) + return err; + cam->picture.brightness = v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_SAT, &v); + if (err) + return err; + cam->picture.colour = v; + + err = w9968cf_sensor_get_control(cam, OVCAMCHIP_CID_HUE, &v); + if (err) + return err; + cam->picture.hue = v; + + DBG(5, "Got picture settings from the image sensor") + + PDBGG("Brightness, contrast, hue, colour, whiteness are " + "%u,%u,%u,%u,%u", cam->picture.brightness,cam->picture.contrast, + cam->picture.hue, cam->picture.colour, cam->picture.whiteness) + + return 0; +} + + +/*-------------------------------------------------------------------------- + Update picture settings of the image sensor. + Returns: 0 on success, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int +w9968cf_sensor_update_picture(struct w9968cf_device* cam, + struct video_picture pict) +{ + int err = 0; + + if ((!cam->sensor_initialized) + || pict.contrast != cam->picture.contrast) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_CONT, + pict.contrast); + if (err) + goto fail; + DBG(4, "Contrast changed from %u to %u", + cam->picture.contrast, pict.contrast) + cam->picture.contrast = pict.contrast; + } + + if (((!cam->sensor_initialized) || + pict.brightness != cam->picture.brightness) && (!cam->auto_brt)) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_BRIGHT, + pict.brightness); + if (err) + goto fail; + DBG(4, "Brightness changed from %u to %u", + cam->picture.brightness, pict.brightness) + cam->picture.brightness = pict.brightness; + } + + if ((!cam->sensor_initialized) || pict.colour != cam->picture.colour) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_SAT, + pict.colour); + if (err) + goto fail; + DBG(4, "Colour changed from %u to %u", + cam->picture.colour, pict.colour) + cam->picture.colour = pict.colour; + } + + if ((!cam->sensor_initialized) || pict.hue != cam->picture.hue) { + err = w9968cf_sensor_set_control(cam, OVCAMCHIP_CID_HUE, + pict.hue); + if (err) + goto fail; + DBG(4, "Hue changed from %u to %u", + cam->picture.hue, pict.hue) + cam->picture.hue = pict.hue; + } + + return 0; + +fail: + DBG(4, "Failed to change sensor picture setting") + return err; +} + + + +/**************************************************************************** + * Camera configuration * + ****************************************************************************/ + +/*-------------------------------------------------------------------------- + This function is called when a supported image sensor is detected. + Return 0 if the initialization succeeds, a negative number otherwise. + --------------------------------------------------------------------------*/ +static int w9968cf_sensor_init(struct w9968cf_device* cam) +{ + int err = 0; + + if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_INITIALIZE, + &cam->monochrome))) + goto error; + + if ((err = w9968cf_sensor_cmd(cam, OVCAMCHIP_CMD_Q_SUBTYPE, + &cam->sensor))) + goto error; + + /* NOTE: Make sure width and height are a multiple of 16 */ + switch (cam->sensor_client->addr) { + case OV6xx0_SID: + cam->maxwidth = 352; + cam->maxheight = 288; + cam->minwidth = 64; + cam->minheight = 48; + break; + case OV7xx0_SID: + cam->maxwidth = 640; + cam->maxheight = 480; + cam->minwidth = 64; + cam->minheight = 48; + break; + default: + DBG(1, "Not supported image sensor detected for %s", + symbolic(camlist, cam->id)) + return -EINVAL; + } + + /* These values depend on the ones in the ovxxx0.c sources */ + switch (cam->sensor) { + case CC_OV7620: + cam->start_cropx = 287; + cam->start_cropy = 35; + /* Seems to work around a bug in the image sensor */ + cam->vs_polarity = 1; + cam->hs_polarity = 1; + break; + default: + cam->start_cropx = 320; + cam->start_cropy = 35; + cam->vs_polarity = 1; + cam->hs_polarity = 0; + } + + if ((err = w9968cf_sensor_update_settings(cam))) + goto error; + + if ((err = w9968cf_sensor_update_picture(cam, cam->picture))) + goto error; + + cam->sensor_initialized = 1; + + DBG(2, "%s image sensor initialized", symbolic(senlist, cam->sensor)) + return 0; + +error: + cam->sensor_initialized = 0; + cam->sensor = CC_UNKNOWN; + DBG(1, "Image sensor initialization failed for %s (/dev/video%d). " + "Try to detach and attach this device again", + symbolic(camlist, cam->id), cam->v4ldev->minor) + return err; +} + + +/*-------------------------------------------------------------------------- + Fill some basic fields in the main device data structure. + This function is called once on w9968cf_usb_probe() for each recognized + camera. + --------------------------------------------------------------------------*/ +static void +w9968cf_configure_camera(struct w9968cf_device* cam, + struct usb_device* udev, + enum w9968cf_model_id mod_id, + const unsigned short dev_nr) +{ + mutex_init(&cam->fileop_mutex); + init_waitqueue_head(&cam->open); + spin_lock_init(&cam->urb_lock); + spin_lock_init(&cam->flist_lock); + + cam->users = 0; + cam->disconnected = 0; + cam->id = mod_id; + cam->sensor = CC_UNKNOWN; + cam->sensor_initialized = 0; + + /* Calculate the alternate setting number (from 1 to 16) + according to the 'packet_size' module parameter */ + if (packet_size[dev_nr] < W9968CF_MIN_PACKET_SIZE) + packet_size[dev_nr] = W9968CF_MIN_PACKET_SIZE; + for (cam->altsetting = 1; + packet_size[dev_nr] < wMaxPacketSize[cam->altsetting-1]; + cam->altsetting++); + + cam->max_buffers = (max_buffers[dev_nr] < 2 || + max_buffers[dev_nr] > W9968CF_MAX_BUFFERS) + ? W9968CF_BUFFERS : (u8)max_buffers[dev_nr]; + + cam->double_buffer = (double_buffer[dev_nr] == 0 || + double_buffer[dev_nr] == 1) + ? (u8)double_buffer[dev_nr]:W9968CF_DOUBLE_BUFFER; + + cam->clamping = (clamping[dev_nr] == 0 || clamping[dev_nr] == 1) + ? (u8)clamping[dev_nr] : W9968CF_CLAMPING; + + cam->filter_type = (filter_type[dev_nr] == 0 || + filter_type[dev_nr] == 1 || + filter_type[dev_nr] == 2) + ? (u8)filter_type[dev_nr] : W9968CF_FILTER_TYPE; + + cam->capture = 1; + + cam->largeview = (largeview[dev_nr] == 0 || largeview[dev_nr] == 1) + ? (u8)largeview[dev_nr] : W9968CF_LARGEVIEW; + + cam->decompression = (decompression[dev_nr] == 0 || + decompression[dev_nr] == 1 || + decompression[dev_nr] == 2) + ? (u8)decompression[dev_nr]:W9968CF_DECOMPRESSION; + + cam->upscaling = (upscaling[dev_nr] == 0 || + upscaling[dev_nr] == 1) + ? (u8)upscaling[dev_nr] : W9968CF_UPSCALING; + + cam->auto_brt = (autobright[dev_nr] == 0 || autobright[dev_nr] == 1) + ? (u8)autobright[dev_nr] : W9968CF_AUTOBRIGHT; + + cam->auto_exp = (autoexp[dev_nr] == 0 || autoexp[dev_nr] == 1) + ? (u8)autoexp[dev_nr] : W9968CF_AUTOEXP; + + cam->lightfreq = (lightfreq[dev_nr] == 50 || lightfreq[dev_nr] == 60) + ? (u8)lightfreq[dev_nr] : W9968CF_LIGHTFREQ; + + cam->bandfilt = (bandingfilter[dev_nr] == 0 || + bandingfilter[dev_nr] == 1) + ? (u8)bandingfilter[dev_nr] : W9968CF_BANDINGFILTER; + + cam->backlight = (backlight[dev_nr] == 0 || backlight[dev_nr] == 1) + ? (u8)backlight[dev_nr] : W9968CF_BACKLIGHT; + + cam->clockdiv = (clockdiv[dev_nr] == -1 || clockdiv[dev_nr] >= 0) + ? (s8)clockdiv[dev_nr] : W9968CF_CLOCKDIV; + + cam->mirror = (mirror[dev_nr] == 0 || mirror[dev_nr] == 1) + ? (u8)mirror[dev_nr] : W9968CF_MIRROR; + + cam->monochrome = (monochrome[dev_nr] == 0 || monochrome[dev_nr] == 1) + ? monochrome[dev_nr] : W9968CF_MONOCHROME; + + cam->picture.brightness = (u16)brightness[dev_nr]; + cam->picture.hue = (u16)hue[dev_nr]; + cam->picture.colour = (u16)colour[dev_nr]; + cam->picture.contrast = (u16)contrast[dev_nr]; + cam->picture.whiteness = (u16)whiteness[dev_nr]; + if (w9968cf_valid_palette((u16)force_palette[dev_nr])) { + cam->picture.palette = (u16)force_palette[dev_nr]; + cam->force_palette = 1; + } else { + cam->force_palette = 0; + if (cam->decompression == 0) + cam->picture.palette = W9968CF_PALETTE_DECOMP_OFF; + else if (cam->decompression == 1) + cam->picture.palette = W9968CF_PALETTE_DECOMP_FORCE; + else + cam->picture.palette = W9968CF_PALETTE_DECOMP_ON; + } + cam->picture.depth = w9968cf_valid_depth(cam->picture.palette); + + cam->force_rgb = (force_rgb[dev_nr] == 0 || force_rgb[dev_nr] == 1) + ? (u8)force_rgb[dev_nr] : W9968CF_FORCE_RGB; + + cam->window.x = 0; + cam->window.y = 0; + cam->window.width = W9968CF_WIDTH; + cam->window.height = W9968CF_HEIGHT; + cam->window.chromakey = 0; + cam->window.clipcount = 0; + cam->window.flags = 0; + + DBG(3, "%s configured with settings #%u:", + symbolic(camlist, cam->id), dev_nr) + + DBG(3, "- Data packet size for USB isochrnous transfer: %u bytes", + wMaxPacketSize[cam->altsetting-1]) + + DBG(3, "- Number of requested video frame buffers: %u", + cam->max_buffers) + + if (cam->double_buffer) + DBG(3, "- Hardware double buffering enabled") + else + DBG(3, "- Hardware double buffering disabled") + + if (cam->filter_type == 0) + DBG(3, "- Video filtering disabled") + else if (cam->filter_type == 1) + DBG(3, "- Video filtering enabled: type 1-2-1") + else if (cam->filter_type == 2) + DBG(3, "- Video filtering enabled: type 2-3-6-3-2") + + if (cam->clamping) + DBG(3, "- Video data clamping (CCIR-601 format) enabled") + else + DBG(3, "- Video data clamping (CCIR-601 format) disabled") + + if (cam->largeview) + DBG(3, "- Large view enabled") + else + DBG(3, "- Large view disabled") + + if ((cam->decompression) == 0 && (!cam->force_palette)) + DBG(3, "- Decompression disabled") + else if ((cam->decompression) == 1 && (!cam->force_palette)) + DBG(3, "- Decompression forced") + else if ((cam->decompression) == 2 && (!cam->force_palette)) + DBG(3, "- Decompression allowed") + + if (cam->upscaling) + DBG(3, "- Software image scaling enabled") + else + DBG(3, "- Software image scaling disabled") + + if (cam->force_palette) + DBG(3, "- Image palette forced to %s", + symbolic(v4l1_plist, cam->picture.palette)) + + if (cam->force_rgb) + DBG(3, "- RGB component ordering will be used instead of BGR") + + if (cam->auto_brt) + DBG(3, "- Auto brightness enabled") + else + DBG(3, "- Auto brightness disabled") + + if (cam->auto_exp) + DBG(3, "- Auto exposure enabled") + else + DBG(3, "- Auto exposure disabled") + + if (cam->backlight) + DBG(3, "- Backlight exposure algorithm enabled") + else + DBG(3, "- Backlight exposure algorithm disabled") + + if (cam->mirror) + DBG(3, "- Mirror enabled") + else + DBG(3, "- Mirror disabled") + + if (cam->bandfilt) + DBG(3, "- Banding filter enabled") + else + DBG(3, "- Banding filter disabled") + + DBG(3, "- Power lighting frequency: %u", cam->lightfreq) + + if (cam->clockdiv == -1) + DBG(3, "- Automatic clock divisor enabled") + else + DBG(3, "- Clock divisor: %d", cam->clockdiv) + + if (cam->monochrome) + DBG(3, "- Image sensor used as monochrome") + else + DBG(3, "- Image sensor not used as monochrome") +} + + +/*-------------------------------------------------------------------------- + If the video post-processing module is not loaded, some parameters + must be overridden. + --------------------------------------------------------------------------*/ +static void w9968cf_adjust_configuration(struct w9968cf_device* cam) +{ + if (!w9968cf_vpp) { + if (cam->decompression == 1) { + cam->decompression = 2; + DBG(2, "Video post-processing module not found: " + "'decompression' parameter forced to 2") + } + if (cam->upscaling) { + cam->upscaling = 0; + DBG(2, "Video post-processing module not found: " + "'upscaling' parameter forced to 0") + } + if (cam->picture.palette != VIDEO_PALETTE_UYVY) { + cam->force_palette = 0; + DBG(2, "Video post-processing module not found: " + "'force_palette' parameter forced to 0") + } + cam->picture.palette = VIDEO_PALETTE_UYVY; + cam->picture.depth = w9968cf_valid_depth(cam->picture.palette); + } +} + + +/*-------------------------------------------------------------------------- + Release the resources used by the driver. + This function is called on disconnect + (or on close if deallocation has been deferred) + --------------------------------------------------------------------------*/ +static void w9968cf_release_resources(struct w9968cf_device* cam) +{ + mutex_lock(&w9968cf_devlist_mutex); + + DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor) + + video_unregister_device(cam->v4ldev); + list_del(&cam->v4llist); + i2c_del_adapter(&cam->i2c_adapter); + w9968cf_deallocate_memory(cam); + kfree(cam->control_buffer); + kfree(cam->data_buffer); + + mutex_unlock(&w9968cf_devlist_mutex); +} + + + +/**************************************************************************** + * Video4Linux interface * + ****************************************************************************/ + +static int w9968cf_open(struct inode* inode, struct file* filp) +{ + struct w9968cf_device* cam; + int err; + + /* This the only safe way to prevent race conditions with disconnect */ + if (!down_read_trylock(&w9968cf_disconnect)) + return -ERESTARTSYS; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); + + if (cam->sensor == CC_UNKNOWN) { + DBG(2, "No supported image sensor has been detected by the " + "'ovcamchip' module for the %s (/dev/video%d). Make " + "sure it is loaded *before* (re)connecting the camera.", + symbolic(camlist, cam->id), cam->v4ldev->minor) + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + return -ENODEV; + } + + if (cam->users) { + DBG(2, "%s (/dev/video%d) has been already occupied by '%s'", + symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command) + if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) { + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + return -EWOULDBLOCK; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->disconnected || + !cam->users); + if (err) { + up_read(&w9968cf_disconnect); + return err; + } + if (cam->disconnected) { + up_read(&w9968cf_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + DBG(5, "Opening '%s', /dev/video%d ...", + symbolic(camlist, cam->id), cam->v4ldev->minor) + + cam->streaming = 0; + cam->misconfigured = 0; + + w9968cf_adjust_configuration(cam); + + if ((err = w9968cf_allocate_memory(cam))) + goto deallocate_memory; + + if ((err = w9968cf_init_chip(cam))) + goto deallocate_memory; + + if ((err = w9968cf_start_transfer(cam))) + goto deallocate_memory; + + filp->private_data = cam; + + cam->users++; + strcpy(cam->command, current->comm); + + init_waitqueue_head(&cam->wait_queue); + + DBG(5, "Video device is open") + + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + + return 0; + +deallocate_memory: + w9968cf_deallocate_memory(cam); + DBG(2, "Failed to open the video device") + mutex_unlock(&cam->dev_mutex); + up_read(&w9968cf_disconnect); + return err; +} + + +static int w9968cf_release(struct inode* inode, struct file* filp) +{ + struct w9968cf_device* cam; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + w9968cf_stop_transfer(cam); + + if (cam->disconnected) { + w9968cf_release_resources(cam); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + w9968cf_deallocate_memory(cam); + wake_up_interruptible_nr(&cam->open, 1); + + DBG(5, "Video device closed") + mutex_unlock(&cam->dev_mutex); + return 0; +} + + +static ssize_t +w9968cf_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) +{ + struct w9968cf_device* cam; + struct w9968cf_frame_t* fr; + int err = 0; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + if (filp->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->disconnected) { + DBG(2, "Device not present") + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->misconfigured) { + DBG(2, "The camera is misconfigured. Close and open it again.") + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (!cam->frame[0].queued) + w9968cf_push_frame(cam, 0); + + if (!cam->frame[1].queued) + w9968cf_push_frame(cam, 1); + + err = wait_event_interruptible(cam->wait_queue, + cam->frame[0].status == F_READY || + cam->frame[1].status == F_READY || + cam->disconnected); + if (err) { + mutex_unlock(&cam->fileop_mutex); + return err; + } + if (cam->disconnected) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + fr = (cam->frame[0].status == F_READY) ? &cam->frame[0]:&cam->frame[1]; + + if (w9968cf_vpp) + w9968cf_postprocess_frame(cam, fr); + + if (count > fr->length) + count = fr->length; + + if (copy_to_user(buf, fr->buffer, count)) { + fr->status = F_UNUSED; + mutex_unlock(&cam->fileop_mutex); + return -EFAULT; + } + *f_pos += count; + + fr->status = F_UNUSED; + + DBG(5, "%zu bytes read", count) + + mutex_unlock(&cam->fileop_mutex); + return count; +} + + +static int w9968cf_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct w9968cf_device* cam = (struct w9968cf_device*) + video_get_drvdata(video_devdata(filp)); + unsigned long vsize = vma->vm_end - vma->vm_start, + psize = cam->nbuffers * cam->frame[0].size, + start = vma->vm_start, + pos = (unsigned long)cam->frame[0].buffer, + page; + + if (cam->disconnected) { + DBG(2, "Device not present") + return -ENODEV; + } + + if (cam->misconfigured) { + DBG(2, "The camera is misconfigured. Close and open it again") + return -EIO; + } + + PDBGG("mmapping %lu bytes...", vsize) + + if (vsize > psize - (vma->vm_pgoff << PAGE_SHIFT)) + return -EINVAL; + + while (vsize > 0) { + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page + vma->vm_pgoff, + PAGE_SIZE, vma->vm_page_prot)) + return -EAGAIN; + start += PAGE_SIZE; + pos += PAGE_SIZE; + vsize -= PAGE_SIZE; + } + + DBG(5, "mmap method successfully called") + return 0; +} + + +static int +w9968cf_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct w9968cf_device* cam; + int err; + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->disconnected) { + DBG(2, "Device not present") + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->misconfigured) { + DBG(2, "The camera is misconfigured. Close and open it again.") + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + err = w9968cf_v4l_ioctl(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + return err; +} + + +static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct w9968cf_device* cam; + const char* v4l1_ioctls[] = { + "?", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER", + "GPICT", "SPICT", "CCAPTURE", "GWIN", "SWIN", "GFBUF", + "SFBUF", "KEY", "GFREQ", "SFREQ", "GAUDIO", "SAUDIO", + "SYNC", "MCAPTURE", "GMBUF", "GUNIT", "GCAPTURE", "SCAPTURE", + "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", "SMICROCODE", + "GVBIFMT", "SVBIFMT" + }; + + #define V4L1_IOCTL(cmd) \ + ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \ + v4l1_ioctls[_IOC_NR((cmd))] : "?") + + cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOCGCAP: /* get video capability */ + { + struct video_capability cap = { + .type = VID_TYPE_CAPTURE | VID_TYPE_SCALES, + .channels = 1, + .audios = 0, + .minwidth = cam->minwidth, + .minheight = cam->minheight, + }; + sprintf(cap.name, "W996[87]CF USB Camera #%d", + cam->v4ldev->minor); + cap.maxwidth = (cam->upscaling && w9968cf_vpp) + ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) + : cam->maxwidth; + cap.maxheight = (cam->upscaling && w9968cf_vpp) + ? max((u16)W9968CF_MAX_HEIGHT, cam->maxheight) + : cam->maxheight; + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + DBG(5, "VIDIOCGCAP successfully called") + return 0; + } + + case VIDIOCGCHAN: /* get video channel informations */ + { + struct video_channel chan; + if (copy_from_user(&chan, arg, sizeof(chan))) + return -EFAULT; + + if (chan.channel != 0) + return -EINVAL; + + strcpy(chan.name, "Camera"); + chan.tuners = 0; + chan.flags = 0; + chan.type = VIDEO_TYPE_CAMERA; + chan.norm = VIDEO_MODE_AUTO; + + if (copy_to_user(arg, &chan, sizeof(chan))) + return -EFAULT; + + DBG(5, "VIDIOCGCHAN successfully called") + return 0; + } + + case VIDIOCSCHAN: /* set active channel */ + { + struct video_channel chan; + + if (copy_from_user(&chan, arg, sizeof(chan))) + return -EFAULT; + + if (chan.channel != 0) + return -EINVAL; + + DBG(5, "VIDIOCSCHAN successfully called") + return 0; + } + + case VIDIOCGPICT: /* get image properties of the picture */ + { + if (w9968cf_sensor_get_picture(cam)) + return -EIO; + + if (copy_to_user(arg, &cam->picture, sizeof(cam->picture))) + return -EFAULT; + + DBG(5, "VIDIOCGPICT successfully called") + return 0; + } + + case VIDIOCSPICT: /* change picture settings */ + { + struct video_picture pict; + int err = 0; + + if (copy_from_user(&pict, arg, sizeof(pict))) + return -EFAULT; + + if ( (cam->force_palette || !w9968cf_vpp) + && pict.palette != cam->picture.palette ) { + DBG(4, "Palette %s rejected: only %s is allowed", + symbolic(v4l1_plist, pict.palette), + symbolic(v4l1_plist, cam->picture.palette)) + return -EINVAL; + } + + if (!w9968cf_valid_palette(pict.palette)) { + DBG(4, "Palette %s not supported. VIDIOCSPICT failed", + symbolic(v4l1_plist, pict.palette)) + return -EINVAL; + } + + if (!cam->force_palette) { + if (cam->decompression == 0) { + if (w9968cf_need_decompression(pict.palette)) { + DBG(4, "Decompression disabled: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, pict.palette)) + return -EINVAL; + } + } else if (cam->decompression == 1) { + if (!w9968cf_need_decompression(pict.palette)) { + DBG(4, "Decompression forced: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, pict.palette)) + return -EINVAL; + } + } + } + + if (pict.depth != w9968cf_valid_depth(pict.palette)) { + DBG(4, "Requested depth %u bpp is not valid for %s " + "palette: ignored and changed to %u bpp", + pict.depth, symbolic(v4l1_plist, pict.palette), + w9968cf_valid_depth(pict.palette)) + pict.depth = w9968cf_valid_depth(pict.palette); + } + + if (pict.palette != cam->picture.palette) { + if(*cam->requested_frame + || cam->frame_current->queued) { + err = wait_event_interruptible + ( cam->wait_queue, + cam->disconnected || + (!*cam->requested_frame && + !cam->frame_current->queued) ); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + if (w9968cf_stop_transfer(cam)) + goto ioctl_fail; + + if (w9968cf_set_picture(cam, pict)) + goto ioctl_fail; + + if (w9968cf_start_transfer(cam)) + goto ioctl_fail; + + } else if (w9968cf_sensor_update_picture(cam, pict)) + return -EIO; + + + DBG(5, "VIDIOCSPICT successfully called") + return 0; + } + + case VIDIOCSWIN: /* set capture area */ + { + struct video_window win; + int err = 0; + + if (copy_from_user(&win, arg, sizeof(win))) + return -EFAULT; + + DBG(6, "VIDIOCSWIN called: clipcount=%d, flags=%u, " + "x=%u, y=%u, %ux%u", win.clipcount, win.flags, + win.x, win.y, win.width, win.height) + + if (win.clipcount != 0 || win.flags != 0) + return -EINVAL; + + if ((err = w9968cf_adjust_window_size(cam, (u16*)&win.width, + (u16*)&win.height))) { + DBG(4, "Resolution not supported (%ux%u). " + "VIDIOCSWIN failed", win.width, win.height) + return err; + } + + if (win.x != cam->window.x || + win.y != cam->window.y || + win.width != cam->window.width || + win.height != cam->window.height) { + if(*cam->requested_frame + || cam->frame_current->queued) { + err = wait_event_interruptible + ( cam->wait_queue, + cam->disconnected || + (!*cam->requested_frame && + !cam->frame_current->queued) ); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + if (w9968cf_stop_transfer(cam)) + goto ioctl_fail; + + /* This _must_ be called before set_window() */ + if (w9968cf_set_picture(cam, cam->picture)) + goto ioctl_fail; + + if (w9968cf_set_window(cam, win)) + goto ioctl_fail; + + if (w9968cf_start_transfer(cam)) + goto ioctl_fail; + } + + DBG(5, "VIDIOCSWIN successfully called. ") + return 0; + } + + case VIDIOCGWIN: /* get current window properties */ + { + if (copy_to_user(arg,&cam->window,sizeof(struct video_window))) + return -EFAULT; + + DBG(5, "VIDIOCGWIN successfully called") + return 0; + } + + case VIDIOCGMBUF: /* request for memory (mapped) buffer */ + { + struct video_mbuf mbuf; + u8 i; + + mbuf.size = cam->nbuffers * cam->frame[0].size; + mbuf.frames = cam->nbuffers; + for (i = 0; i < cam->nbuffers; i++) + mbuf.offsets[i] = (unsigned long)cam->frame[i].buffer - + (unsigned long)cam->frame[0].buffer; + + if (copy_to_user(arg, &mbuf, sizeof(mbuf))) + return -EFAULT; + + DBG(5, "VIDIOCGMBUF successfully called") + return 0; + } + + case VIDIOCMCAPTURE: /* start the capture to a frame */ + { + struct video_mmap mmap; + struct w9968cf_frame_t* fr; + int err = 0; + + if (copy_from_user(&mmap, arg, sizeof(mmap))) + return -EFAULT; + + DBG(6, "VIDIOCMCAPTURE called: frame #%u, format=%s, %dx%d", + mmap.frame, symbolic(v4l1_plist, mmap.format), + mmap.width, mmap.height) + + if (mmap.frame >= cam->nbuffers) { + DBG(4, "Invalid frame number (%u). " + "VIDIOCMCAPTURE failed", mmap.frame) + return -EINVAL; + } + + if (mmap.format!=cam->picture.palette && + (cam->force_palette || !w9968cf_vpp)) { + DBG(4, "Palette %s rejected: only %s is allowed", + symbolic(v4l1_plist, mmap.format), + symbolic(v4l1_plist, cam->picture.palette)) + return -EINVAL; + } + + if (!w9968cf_valid_palette(mmap.format)) { + DBG(4, "Palette %s not supported. " + "VIDIOCMCAPTURE failed", + symbolic(v4l1_plist, mmap.format)) + return -EINVAL; + } + + if (!cam->force_palette) { + if (cam->decompression == 0) { + if (w9968cf_need_decompression(mmap.format)) { + DBG(4, "Decompression disabled: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, mmap.format)) + return -EINVAL; + } + } else if (cam->decompression == 1) { + if (!w9968cf_need_decompression(mmap.format)) { + DBG(4, "Decompression forced: palette %s is not " + "allowed. VIDIOCSPICT failed", + symbolic(v4l1_plist, mmap.format)) + return -EINVAL; + } + } + } + + if ((err = w9968cf_adjust_window_size(cam, (u16*)&mmap.width, + (u16*)&mmap.height))) { + DBG(4, "Resolution not supported (%dx%d). " + "VIDIOCMCAPTURE failed", + mmap.width, mmap.height) + return err; + } + + fr = &cam->frame[mmap.frame]; + + if (mmap.width != cam->window.width || + mmap.height != cam->window.height || + mmap.format != cam->picture.palette) { + + struct video_window win; + struct video_picture pict; + + if(*cam->requested_frame + || cam->frame_current->queued) { + DBG(6, "VIDIOCMCAPTURE. Change settings for " + "frame #%u: %dx%d, format %s. Wait...", + mmap.frame, mmap.width, mmap.height, + symbolic(v4l1_plist, mmap.format)) + err = wait_event_interruptible + ( cam->wait_queue, + cam->disconnected || + (!*cam->requested_frame && + !cam->frame_current->queued) ); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + memcpy(&win, &cam->window, sizeof(win)); + memcpy(&pict, &cam->picture, sizeof(pict)); + win.width = mmap.width; + win.height = mmap.height; + pict.palette = mmap.format; + + if (w9968cf_stop_transfer(cam)) + goto ioctl_fail; + + /* This before set_window */ + if (w9968cf_set_picture(cam, pict)) + goto ioctl_fail; + + if (w9968cf_set_window(cam, win)) + goto ioctl_fail; + + if (w9968cf_start_transfer(cam)) + goto ioctl_fail; + + } else if (fr->queued) { + + DBG(6, "Wait until frame #%u is free", mmap.frame) + + err = wait_event_interruptible(cam->wait_queue, + cam->disconnected || + (!fr->queued)); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + } + + w9968cf_push_frame(cam, mmap.frame); + DBG(5, "VIDIOCMCAPTURE(%u): successfully called", mmap.frame) + return 0; + } + + case VIDIOCSYNC: /* wait until the capture of a frame is finished */ + { + unsigned int f_num; + struct w9968cf_frame_t* fr; + int err = 0; + + if (copy_from_user(&f_num, arg, sizeof(f_num))) + return -EFAULT; + + if (f_num >= cam->nbuffers) { + DBG(4, "Invalid frame number (%u). " + "VIDIOCMCAPTURE failed", f_num) + return -EINVAL; + } + + DBG(6, "VIDIOCSYNC called for frame #%u", f_num) + + fr = &cam->frame[f_num]; + + switch (fr->status) { + case F_UNUSED: + if (!fr->queued) { + DBG(4, "VIDIOSYNC: Frame #%u not requested!", + f_num) + return -EFAULT; + } + case F_ERROR: + case F_GRABBING: + err = wait_event_interruptible(cam->wait_queue, + (fr->status == F_READY) + || cam->disconnected); + if (err) + return err; + if (cam->disconnected) + return -ENODEV; + break; + case F_READY: + break; + } + + if (w9968cf_vpp) + w9968cf_postprocess_frame(cam, fr); + + fr->status = F_UNUSED; + + DBG(5, "VIDIOCSYNC(%u) successfully called", f_num) + return 0; + } + + case VIDIOCGUNIT:/* report the unit numbers of the associated devices*/ + { + struct video_unit unit = { + .video = cam->v4ldev->minor, + .vbi = VIDEO_NO_UNIT, + .radio = VIDEO_NO_UNIT, + .audio = VIDEO_NO_UNIT, + .teletext = VIDEO_NO_UNIT, + }; + + if (copy_to_user(arg, &unit, sizeof(unit))) + return -EFAULT; + + DBG(5, "VIDIOCGUNIT successfully called") + return 0; + } + + case VIDIOCKEY: + return 0; + + case VIDIOCGFBUF: + { + if (clear_user(arg, sizeof(struct video_buffer))) + return -EFAULT; + + DBG(5, "VIDIOCGFBUF successfully called") + return 0; + } + + case VIDIOCGTUNER: + { + struct video_tuner tuner; + if (copy_from_user(&tuner, arg, sizeof(tuner))) + return -EFAULT; + + if (tuner.tuner != 0) + return -EINVAL; + + strcpy(tuner.name, "no_tuner"); + tuner.rangelow = 0; + tuner.rangehigh = 0; + tuner.flags = VIDEO_TUNER_NORM; + tuner.mode = VIDEO_MODE_AUTO; + tuner.signal = 0xffff; + + if (copy_to_user(arg, &tuner, sizeof(tuner))) + return -EFAULT; + + DBG(5, "VIDIOCGTUNER successfully called") + return 0; + } + + case VIDIOCSTUNER: + { + struct video_tuner tuner; + if (copy_from_user(&tuner, arg, sizeof(tuner))) + return -EFAULT; + + if (tuner.tuner != 0) + return -EINVAL; + + if (tuner.mode != VIDEO_MODE_AUTO) + return -EINVAL; + + DBG(5, "VIDIOCSTUNER successfully called") + return 0; + } + + case VIDIOCSFBUF: + case VIDIOCCAPTURE: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + case VIDIOCGAUDIO: + case VIDIOCSAUDIO: + case VIDIOCSPLAYMODE: + case VIDIOCSWRITEMODE: + case VIDIOCGPLAYINFO: + case VIDIOCSMICROCODE: + case VIDIOCGVBIFMT: + case VIDIOCSVBIFMT: + DBG(4, "Unsupported V4L1 IOCtl: VIDIOC%s " + "(type 0x%01X, " + "n. 0x%01X, " + "dir. 0x%01X, " + "size 0x%02X)", + V4L1_IOCTL(cmd), + _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd)) + + return -EINVAL; + + default: + DBG(4, "Invalid V4L1 IOCtl: VIDIOC%s " + "type 0x%01X, " + "n. 0x%01X, " + "dir. 0x%01X, " + "size 0x%02X", + V4L1_IOCTL(cmd), + _IOC_TYPE(cmd),_IOC_NR(cmd),_IOC_DIR(cmd),_IOC_SIZE(cmd)) + + return -ENOIOCTLCMD; + + } /* end of switch */ + +ioctl_fail: + cam->misconfigured = 1; + DBG(1, "VIDIOC%s failed because of hardware problems. " + "To use the camera, close and open it again.", V4L1_IOCTL(cmd)) + return -EFAULT; +} + + +static struct file_operations w9968cf_fops = { + .owner = THIS_MODULE, + .open = w9968cf_open, + .release = w9968cf_release, + .read = w9968cf_read, + .ioctl = w9968cf_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .mmap = w9968cf_mmap, + .llseek = no_llseek, +}; + + + +/**************************************************************************** + * USB probe and V4L registration, disconnect and id_table[] definition * + ****************************************************************************/ + +static int +w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct w9968cf_device* cam; + int err = 0; + enum w9968cf_model_id mod_id; + struct list_head* ptr; + u8 sc = 0; /* number of simultaneous cameras */ + static unsigned short dev_nr = 0; /* we are handling device number n */ + + if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor && + le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct) + mod_id = W9968CF_MOD_CLVBWGP; /* see camlist[] table */ + else if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[1].idVendor && + le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[1].idProduct) + mod_id = W9968CF_MOD_GENERIC; /* see camlist[] table */ + else + return -ENODEV; + + cam = (struct w9968cf_device*) + kzalloc(sizeof(struct w9968cf_device), GFP_KERNEL); + if (!cam) + return -ENOMEM; + + mutex_init(&cam->dev_mutex); + mutex_lock(&cam->dev_mutex); + + cam->usbdev = udev; + /* NOTE: a local copy is used to avoid possible race conditions */ + memcpy(&cam->dev, &udev->dev, sizeof(struct device)); + + DBG(2, "%s detected", symbolic(camlist, mod_id)) + + if (simcams > W9968CF_MAX_DEVICES) + simcams = W9968CF_SIMCAMS; + + /* How many cameras are connected ? */ + mutex_lock(&w9968cf_devlist_mutex); + list_for_each(ptr, &w9968cf_dev_list) + sc++; + mutex_unlock(&w9968cf_devlist_mutex); + + if (sc >= simcams) { + DBG(2, "Device rejected: too many connected cameras " + "(max. %u)", simcams) + err = -EPERM; + goto fail; + } + + + /* Allocate 2 bytes of memory for camera control USB transfers */ + if (!(cam->control_buffer = kzalloc(2, GFP_KERNEL))) { + DBG(1,"Couldn't allocate memory for camera control transfers") + err = -ENOMEM; + goto fail; + } + + /* Allocate 8 bytes of memory for USB data transfers to the FSB */ + if (!(cam->data_buffer = kzalloc(8, GFP_KERNEL))) { + DBG(1, "Couldn't allocate memory for data " + "transfers to the FSB") + err = -ENOMEM; + goto fail; + } + + /* Register the V4L device */ + cam->v4ldev = video_device_alloc(); + if (!cam->v4ldev) { + DBG(1, "Could not allocate memory for a V4L structure") + err = -ENOMEM; + goto fail; + } + + strcpy(cam->v4ldev->name, symbolic(camlist, mod_id)); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = VID_HARDWARE_W9968CF; + cam->v4ldev->fops = &w9968cf_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + cam->v4ldev->dev = &cam->dev; + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L device registration failed") + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(2, "Couldn't find a free /dev/videoX node") + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0; + goto fail; + } + + DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor) + + /* Set some basic constants */ + w9968cf_configure_camera(cam, udev, mod_id, dev_nr); + + /* Add a new entry into the list of V4L registered devices */ + mutex_lock(&w9968cf_devlist_mutex); + list_add(&cam->v4llist, &w9968cf_dev_list); + mutex_unlock(&w9968cf_devlist_mutex); + dev_nr = (dev_nr < W9968CF_MAX_DEVICES-1) ? dev_nr+1 : 0; + + w9968cf_turn_on_led(cam); + + w9968cf_i2c_init(cam); + + usb_set_intfdata(intf, cam); + mutex_unlock(&cam->dev_mutex); + return 0; + +fail: /* Free unused memory */ + kfree(cam->control_buffer); + kfree(cam->data_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return err; +} + + +static void w9968cf_usb_disconnect(struct usb_interface* intf) +{ + struct w9968cf_device* cam = + (struct w9968cf_device*)usb_get_intfdata(intf); + + down_write(&w9968cf_disconnect); + + if (cam) { + /* Prevent concurrent accesses to data */ + mutex_lock(&cam->dev_mutex); + + cam->disconnected = 1; + + DBG(2, "Disconnecting %s...", symbolic(camlist, cam->id)) + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "The device is open (/dev/video%d)! " + "Process name: %s. Deregistration and memory " + "deallocation are deferred on close.", + cam->v4ldev->minor, cam->command) + cam->misconfigured = 1; + w9968cf_stop_transfer(cam); + wake_up_interruptible(&cam->wait_queue); + } else + w9968cf_release_resources(cam); + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + } + + up_write(&w9968cf_disconnect); +} + + +static struct usb_driver w9968cf_usb_driver = { + .name = "w9968cf", + .id_table = winbond_id_table, + .probe = w9968cf_usb_probe, + .disconnect = w9968cf_usb_disconnect, +}; + + + +/**************************************************************************** + * Module init, exit and intermodule communication * + ****************************************************************************/ + +static int __init w9968cf_module_init(void) +{ + int err; + + KDBG(2, W9968CF_MODULE_NAME" "W9968CF_MODULE_VERSION) + KDBG(3, W9968CF_MODULE_AUTHOR) + + if (ovmod_load) + request_module("ovcamchip"); + + if ((err = usb_register(&w9968cf_usb_driver))) + return err; + + return 0; +} + + +static void __exit w9968cf_module_exit(void) +{ + /* w9968cf_usb_disconnect() will be called */ + usb_deregister(&w9968cf_usb_driver); + + KDBG(2, W9968CF_MODULE_NAME" deregistered") +} + + +module_init(w9968cf_module_init); +module_exit(w9968cf_module_exit); + diff --git a/drivers/media/video/w9968cf.h b/drivers/media/video/w9968cf.h new file mode 100644 index 000000000000..2836b45ec206 --- /dev/null +++ b/drivers/media/video/w9968cf.h @@ -0,0 +1,330 @@ +/*************************************************************************** + * Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. * + * * + * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _W9968CF_H_ +#define _W9968CF_H_ + +#include <linux/videodev.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/wait.h> +#include <linux/config.h> +#include <linux/param.h> +#include <linux/types.h> +#include <linux/rwsem.h> +#include <linux/mutex.h> + +#include <media/ovcamchip.h> + +#include "w9968cf_vpp.h" + + +/**************************************************************************** + * Default values * + ****************************************************************************/ + +#define W9968CF_OVMOD_LOAD 1 /* automatic 'ovcamchip' module loading */ +#define W9968CF_VPPMOD_LOAD 1 /* automatic 'w9968cf-vpp' module loading */ + +/* Comment/uncomment the following line to enable/disable debugging messages */ +#define W9968CF_DEBUG + +/* These have effect only if W9968CF_DEBUG is defined */ +#define W9968CF_DEBUG_LEVEL 2 /* from 0 to 6. 0 for no debug informations */ +#define W9968CF_SPECIFIC_DEBUG 0 /* 0 or 1 */ + +#define W9968CF_MAX_DEVICES 32 +#define W9968CF_SIMCAMS W9968CF_MAX_DEVICES /* simultaneous cameras */ + +#define W9968CF_MAX_BUFFERS 32 +#define W9968CF_BUFFERS 2 /* n. of frame buffers from 2 to MAX_BUFFERS */ + +/* Maximum data payload sizes in bytes for alternate settings */ +static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575, + 511, 447, 383, 319, 255, 191, 127, 63}; +#define W9968CF_PACKET_SIZE 1023 /* according to wMaxPacketSizes[] */ +#define W9968CF_MIN_PACKET_SIZE 63 /* minimum value */ +#define W9968CF_ISO_PACKETS 5 /* n.of packets for isochronous transfers */ +#define W9968CF_USB_CTRL_TIMEOUT 1000 /* timeout (ms) for usb control commands */ +#define W9968CF_URBS 2 /* n. of scheduled URBs for ISO transfer */ + +#define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */ +#define W9968CF_I2C_RW_RETRIES 15 /* number of max I2C r/w retries */ + +/* Available video formats */ +struct w9968cf_format { + const u16 palette; + const u16 depth; + const u8 compression; +}; + +static const struct w9968cf_format w9968cf_formatlist[] = { + { VIDEO_PALETTE_UYVY, 16, 0 }, /* original video */ + { VIDEO_PALETTE_YUV422P, 16, 1 }, /* with JPEG compression */ + { VIDEO_PALETTE_YUV420P, 12, 1 }, /* with JPEG compression */ + { VIDEO_PALETTE_YUV420, 12, 1 }, /* same as YUV420P */ + { VIDEO_PALETTE_YUYV, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_YUV422, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_GREY, 8, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB555, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB565, 16, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB24, 24, 0 }, /* software conversion */ + { VIDEO_PALETTE_RGB32, 32, 0 }, /* software conversion */ + { 0, 0, 0 } /* 0 is a terminating entry */ +}; + +#define W9968CF_DECOMPRESSION 2 /* decomp:0=disable,1=force,2=any formats */ +#define W9968CF_PALETTE_DECOMP_OFF VIDEO_PALETTE_UYVY /* when decomp=0 */ +#define W9968CF_PALETTE_DECOMP_FORCE VIDEO_PALETTE_YUV420P /* when decomp=1 */ +#define W9968CF_PALETTE_DECOMP_ON VIDEO_PALETTE_UYVY /* when decomp=2 */ + +#define W9968CF_FORCE_RGB 0 /* read RGB instead of BGR, yes=1/no=0 */ + +#define W9968CF_MAX_WIDTH 800 /* Has effect if up-scaling is on */ +#define W9968CF_MAX_HEIGHT 600 /* Has effect if up-scaling is on */ +#define W9968CF_WIDTH 320 /* from 128 to 352, multiple of 16 */ +#define W9968CF_HEIGHT 240 /* from 96 to 288, multiple of 16 */ + +#define W9968CF_CLAMPING 0 /* 0 disable, 1 enable video data clamping */ +#define W9968CF_FILTER_TYPE 0 /* 0 disable 1 (1-2-1), 2 (2-3-6-3-2) */ +#define W9968CF_DOUBLE_BUFFER 1 /* 0 disable, 1 enable double buffer */ +#define W9968CF_LARGEVIEW 1 /* 0 disable, 1 enable */ +#define W9968CF_UPSCALING 0 /* 0 disable, 1 enable */ + +#define W9968CF_MONOCHROME 0 /* 0 not monochrome, 1 monochrome sensor */ +#define W9968CF_BRIGHTNESS 31000 /* from 0 to 65535 */ +#define W9968CF_HUE 32768 /* from 0 to 65535 */ +#define W9968CF_COLOUR 32768 /* from 0 to 65535 */ +#define W9968CF_CONTRAST 50000 /* from 0 to 65535 */ +#define W9968CF_WHITENESS 32768 /* from 0 to 65535 */ + +#define W9968CF_AUTOBRIGHT 0 /* 0 disable, 1 enable automatic brightness */ +#define W9968CF_AUTOEXP 1 /* 0 disable, 1 enable automatic exposure */ +#define W9968CF_LIGHTFREQ 50 /* light frequency. 50Hz (Europe) or 60Hz */ +#define W9968CF_BANDINGFILTER 0 /* 0 disable, 1 enable banding filter */ +#define W9968CF_BACKLIGHT 0 /* 0 or 1, 1=object is lit from behind */ +#define W9968CF_MIRROR 0 /* 0 or 1 [don't] reverse image horizontally*/ + +#define W9968CF_CLOCKDIV -1 /* -1 = automatic clock divisor */ +#define W9968CF_DEF_CLOCKDIVISOR 0 /* default sensor clock divisor value */ + + +/**************************************************************************** + * Globals * + ****************************************************************************/ + +#define W9968CF_MODULE_NAME "V4L driver for W996[87]CF JPEG USB " \ + "Dual Mode Camera Chip" +#define W9968CF_MODULE_VERSION "1:1.33-basic" +#define W9968CF_MODULE_AUTHOR "(C) 2002-2004 Luca Risolia" +#define W9968CF_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define W9968CF_MODULE_LICENSE "GPL" + +static const struct usb_device_id winbond_id_table[] = { + { + /* Creative Labs Video Blaster WebCam Go Plus */ + USB_DEVICE(0x041e, 0x4003), + .driver_info = (unsigned long)"w9968cf", + }, + { + /* Generic W996[87]CF JPEG USB Dual Mode Camera */ + USB_DEVICE(0x1046, 0x9967), + .driver_info = (unsigned long)"w9968cf", + }, + { } /* terminating entry */ +}; + +/* W996[87]CF camera models, internal ids: */ +enum w9968cf_model_id { + W9968CF_MOD_GENERIC = 1, /* Generic W996[87]CF based device */ + W9968CF_MOD_CLVBWGP = 11,/*Creative Labs Video Blaster WebCam Go Plus*/ + W9968CF_MOD_ADPVDMA = 21, /* Aroma Digi Pen VGA Dual Mode ADG-5000 */ + W9986CF_MOD_AAU = 31, /* AVerMedia AVerTV USB */ + W9968CF_MOD_CLVBWG = 34, /* Creative Labs Video Blaster WebCam Go */ + W9968CF_MOD_LL = 37, /* Lebon LDC-035A */ + W9968CF_MOD_EEEMC = 40, /* Ezonics EZ-802 EZMega Cam */ + W9968CF_MOD_OOE = 42, /* OmniVision OV8610-EDE */ + W9968CF_MOD_ODPVDMPC = 43,/* OPCOM Digi Pen VGA Dual Mode Pen Camera */ + W9968CF_MOD_PDPII = 46, /* Pretec Digi Pen-II */ + W9968CF_MOD_PDP480 = 49, /* Pretec DigiPen-480 */ +}; + +enum w9968cf_frame_status { + F_READY, /* finished grabbing & ready to be read/synced */ + F_GRABBING, /* in the process of being grabbed into */ + F_ERROR, /* something bad happened while processing */ + F_UNUSED /* unused (no VIDIOCMCAPTURE) */ +}; + +struct w9968cf_frame_t { + void* buffer; + unsigned long size; + u32 length; + int number; + enum w9968cf_frame_status status; + struct w9968cf_frame_t* next; + u8 queued; +}; + +enum w9968cf_vpp_flag { + VPP_NONE = 0x00, + VPP_UPSCALE = 0x01, + VPP_SWAP_YUV_BYTES = 0x02, + VPP_DECOMPRESSION = 0x04, + VPP_UYVY_TO_RGBX = 0x08, +}; + +/* Main device driver structure */ +struct w9968cf_device { + struct device dev; /* device structure */ + + enum w9968cf_model_id id; /* private device identifier */ + + struct video_device* v4ldev; /* -> V4L structure */ + struct list_head v4llist; /* entry of the list of V4L cameras */ + + struct usb_device* usbdev; /* -> main USB structure */ + struct urb* urb[W9968CF_URBS]; /* -> USB request block structs */ + void* transfer_buffer[W9968CF_URBS]; /* -> ISO transfer buffers */ + u16* control_buffer; /* -> buffer for control req.*/ + u16* data_buffer; /* -> data to send to the FSB */ + + struct w9968cf_frame_t frame[W9968CF_MAX_BUFFERS]; + struct w9968cf_frame_t frame_tmp; /* temporary frame */ + struct w9968cf_frame_t frame_vpp; /* helper frame.*/ + struct w9968cf_frame_t* frame_current; /* -> frame being grabbed */ + struct w9968cf_frame_t* requested_frame[W9968CF_MAX_BUFFERS]; + + u8 max_buffers, /* number of requested buffers */ + force_palette, /* yes=1/no=0 */ + force_rgb, /* read RGB instead of BGR, yes=1, no=0 */ + double_buffer, /* hardware double buffering yes=1/no=0 */ + clamping, /* video data clamping yes=1/no=0 */ + filter_type, /* 0=disabled, 1=3 tap, 2=5 tap filter */ + capture, /* 0=disabled, 1=enabled */ + largeview, /* 0=disabled, 1=enabled */ + decompression, /* 0=disabled, 1=forced, 2=allowed */ + upscaling; /* software image scaling, 0=enabled, 1=disabled */ + + struct video_picture picture; /* current picture settings */ + struct video_window window; /* current window settings */ + + u16 hw_depth, /* depth (used by the chip) */ + hw_palette, /* palette (used by the chip) */ + hw_width, /* width (used by the chip) */ + hw_height, /* height (used by the chip) */ + hs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */ + vs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */ + start_cropx, /* pixels from HS inactive edge to 1st cropped pixel*/ + start_cropy; /* pixels from VS inactive edge to 1st cropped pixel*/ + + enum w9968cf_vpp_flag vpp_flag; /* post-processing routines in use */ + + u8 nbuffers, /* number of allocated frame buffers */ + altsetting, /* camera alternate setting */ + disconnected, /* flag: yes=1, no=0 */ + misconfigured, /* flag: yes=1, no=0 */ + users, /* flag: number of users holding the device */ + streaming; /* flag: yes=1, no=0 */ + + u8 sensor_initialized; /* flag: yes=1, no=0 */ + + /* Determined by the image sensor type: */ + int sensor, /* type of image sensor chip (CC_*) */ + monochrome; /* image sensor is (probably) monochrome */ + u16 maxwidth, /* maximum width supported by the image sensor */ + maxheight, /* maximum height supported by the image sensor */ + minwidth, /* minimum width supported by the image sensor */ + minheight; /* minimum height supported by the image sensor */ + u8 auto_brt, /* auto brightness enabled flag */ + auto_exp, /* auto exposure enabled flag */ + backlight, /* backlight exposure algorithm flag */ + mirror, /* image is reversed horizontally */ + lightfreq, /* power (lighting) frequency */ + bandfilt; /* banding filter enabled flag */ + s8 clockdiv; /* clock divisor */ + + /* I2C interface to kernel */ + struct i2c_adapter i2c_adapter; + struct i2c_client* sensor_client; + + /* Locks */ + struct mutex dev_mutex, /* for probe, disconnect,open and close */ + fileop_mutex; /* for read and ioctl */ + spinlock_t urb_lock, /* for submit_urb() and unlink_urb() */ + flist_lock; /* for requested frame list accesses */ + wait_queue_head_t open, wait_queue; + + char command[16]; /* name of the program holding the device */ +}; + + +/**************************************************************************** + * Macros for debugging * + ****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef W9968CF_DEBUG +/* For device specific debugging messages */ +# define DBG(level, fmt, args...) \ +{ \ + if ( ((specific_debug) && (debug == (level))) || \ + ((!specific_debug) && (debug >= (level))) ) { \ + if ((level) == 1) \ + dev_err(&cam->dev, fmt "\n", ## args); \ + else if ((level) == 2 || (level) == 3) \ + dev_info(&cam->dev, fmt "\n", ## args); \ + else if ((level) == 4) \ + dev_warn(&cam->dev, fmt "\n", ## args); \ + else if ((level) >= 5) \ + dev_info(&cam->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} +/* For generic kernel (not device specific) messages */ +# define KDBG(level, fmt, args...) \ +{ \ + if ( ((specific_debug) && (debug == (level))) || \ + ((!specific_debug) && (debug >= (level))) ) { \ + if ((level) >= 1 && (level) <= 4) \ + pr_info("w9968cf: " fmt "\n", ## args); \ + else if ((level) >= 5) \ + pr_debug("w9968cf: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} +#else + /* Not debugging: nothing */ +# define DBG(level, fmt, args...) do {;} while(0); +# define KDBG(level, fmt, args...) do {;} while(0); +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args); + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */ + +#endif /* _W9968CF_H_ */ diff --git a/drivers/media/video/w9968cf_decoder.h b/drivers/media/video/w9968cf_decoder.h new file mode 100644 index 000000000000..59decbfc540a --- /dev/null +++ b/drivers/media/video/w9968cf_decoder.h @@ -0,0 +1,86 @@ +/*************************************************************************** + * Video decoder for the W996[87]CF driver for Linux. * + * * + * Copyright (C) 2003 2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _W9968CF_DECODER_H_ +#define _W9968CF_DECODER_H_ + +/* Comment/uncomment this for high/low quality of compressed video */ +#define W9968CF_DEC_FAST_LOWQUALITY_VIDEO + +#ifdef W9968CF_DEC_FAST_LOWQUALITY_VIDEO +static const unsigned char Y_QUANTABLE[64] = { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 +}; + +static const unsigned char UV_QUANTABLE[64] = { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 +}; +#else +static const unsigned char Y_QUANTABLE[64] = { + 8, 5, 5, 8, 12, 20, 25, 30, + 6, 6, 7, 9, 13, 29, 30, 27, + 7, 6, 8, 12, 20, 28, 34, 28, + 7, 8, 11, 14, 25, 43, 40, 31, + 9, 11, 18, 28, 34, 54, 51, 38, + 12, 17, 27, 32, 40, 52, 56, 46, + 24, 32, 39, 43, 51, 60, 60, 50, + 36, 46, 47, 49, 56, 50, 51, 49 +}; + +static const unsigned char UV_QUANTABLE[64] = { + 8, 9, 12, 23, 49, 49, 49, 49, + 9, 10, 13, 33, 49, 49, 49, 49, + 12, 13, 28, 49, 49, 49, 49, 49, + 23, 33, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49, + 49, 49, 49, 49, 49, 49, 49, 49 +}; +#endif + +#define W9968CF_DEC_ERR_CORRUPTED_DATA -1 +#define W9968CF_DEC_ERR_BUF_OVERFLOW -2 +#define W9968CF_DEC_ERR_NO_SOI -3 +#define W9968CF_DEC_ERR_NO_SOF0 -4 +#define W9968CF_DEC_ERR_NO_SOS -5 +#define W9968CF_DEC_ERR_NO_EOI -6 + +extern void w9968cf_init_decoder(void); +extern int w9968cf_check_headers(const unsigned char* Pin, + const unsigned long BUF_SIZE); +extern int w9968cf_decode(const char* Pin, const unsigned long BUF_SIZE, + const unsigned W, const unsigned H, char* Pout); + +#endif /* _W9968CF_DECODER_H_ */ diff --git a/drivers/media/video/w9968cf_vpp.h b/drivers/media/video/w9968cf_vpp.h new file mode 100644 index 000000000000..88c9b6c0cc36 --- /dev/null +++ b/drivers/media/video/w9968cf_vpp.h @@ -0,0 +1,40 @@ +/*************************************************************************** + * Interface for video post-processing functions for the W996[87]CF driver * + * for Linux. * + * * + * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _W9968CF_VPP_H_ +#define _W9968CF_VPP_H_ + +#include <linux/module.h> +#include <asm/types.h> + +struct w9968cf_vpp_t { + struct module* owner; + int (*check_headers)(const unsigned char*, const unsigned long); + int (*decode)(const char*, const unsigned long, const unsigned, + const unsigned, char*); + void (*swap_yuvbytes)(void*, unsigned long); + void (*uyvy_to_rgbx)(u8*, unsigned long, u8*, u16, u8); + void (*scale_up)(u8*, u8*, u16, u16, u16, u16, u16); + + u8 busy; /* read-only flag: module is/is not in use */ +}; + +#endif /* _W9968CF_VPP_H_ */ diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index 8cb64f8a8a91..d81a88bbe43d 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -79,21 +79,26 @@ static int wm8775_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct wm8775_state *state = i2c_get_clientdata(client); - struct v4l2_audio *input = arg; + struct v4l2_routing *route = arg; struct v4l2_control *ctrl = arg; switch (cmd) { - case VIDIOC_S_AUDIO: + case VIDIOC_INT_G_AUDIO_ROUTING: + route->input = state->input; + route->output = 0; + break; + + case VIDIOC_INT_S_AUDIO_ROUTING: /* There are 4 inputs and one output. Zero or more inputs are multiplexed together to the output. Hence there are 16 combinations. If only one input is active (the normal case) then the input values 1, 2, 4 or 8 should be used. */ - if (input->index > 15) { - v4l_err(client, "Invalid input %d.\n", input->index); + if (route->input > 15) { + v4l_err(client, "Invalid input %d.\n", route->input); return -EINVAL; } - state->input = input->index; + state->input = route->input; if (state->muted) break; wm8775_write(client, R21, 0x0c0); @@ -102,11 +107,6 @@ static int wm8775_command(struct i2c_client *client, unsigned int cmd, wm8775_write(client, R21, 0x100 + state->input); break; - case VIDIOC_G_AUDIO: - memset(input, 0, sizeof(*input)); - input->index = state->input; - break; - case VIDIOC_G_CTRL: if (ctrl->id != V4L2_CID_AUDIO_MUTE) return -EINVAL; diff --git a/drivers/media/video/zc0301/Makefile b/drivers/media/video/zc0301/Makefile new file mode 100644 index 000000000000..d749199d8f06 --- /dev/null +++ b/drivers/media/video/zc0301/Makefile @@ -0,0 +1,3 @@ +zc0301-objs := zc0301_core.o zc0301_pas202bcb.o + +obj-$(CONFIG_USB_ZC0301) += zc0301.o diff --git a/drivers/media/video/zc0301/zc0301.h b/drivers/media/video/zc0301/zc0301.h new file mode 100644 index 000000000000..b9c93b8c16f7 --- /dev/null +++ b/drivers/media/video/zc0301/zc0301.h @@ -0,0 +1,192 @@ +/*************************************************************************** + * V4L2 driver for ZC0301 Image Processor and Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ZC0301_H_ +#define _ZC0301_H_ + +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/time.h> +#include <linux/wait.h> +#include <linux/types.h> +#include <linux/param.h> +#include <linux/mutex.h> +#include <linux/rwsem.h> +#include <linux/stddef.h> +#include <linux/string.h> + +#include "zc0301_sensor.h" + +/*****************************************************************************/ + +#define ZC0301_DEBUG +#define ZC0301_DEBUG_LEVEL 2 +#define ZC0301_MAX_DEVICES 64 +#define ZC0301_FORCE_MUNMAP 0 +#define ZC0301_MAX_FRAMES 32 +#define ZC0301_COMPRESSION_QUALITY 0 +#define ZC0301_URBS 2 +#define ZC0301_ISO_PACKETS 7 +#define ZC0301_ALTERNATE_SETTING 7 +#define ZC0301_URB_TIMEOUT msecs_to_jiffies(2 * ZC0301_ISO_PACKETS) +#define ZC0301_CTRL_TIMEOUT 100 +#define ZC0301_FRAME_TIMEOUT 2 + +/*****************************************************************************/ + +ZC0301_ID_TABLE +ZC0301_SENSOR_TABLE + +enum zc0301_frame_state { + F_UNUSED, + F_QUEUED, + F_GRABBING, + F_DONE, + F_ERROR, +}; + +struct zc0301_frame_t { + void* bufmem; + struct v4l2_buffer buf; + enum zc0301_frame_state state; + struct list_head frame; + unsigned long vma_use_count; +}; + +enum zc0301_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +enum zc0301_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +enum zc0301_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON, +}; + +struct zc0301_module_param { + u8 force_munmap; + u16 frame_timeout; +}; + +static DECLARE_RWSEM(zc0301_disconnect); + +struct zc0301_device { + struct video_device* v4ldev; + + struct zc0301_sensor sensor; + + struct usb_device* usbdev; + struct urb* urb[ZC0301_URBS]; + void* transfer_buffer[ZC0301_URBS]; + u8* control_buffer; + + struct zc0301_frame_t *frame_current, frame[ZC0301_MAX_FRAMES]; + struct list_head inqueue, outqueue; + u32 frame_count, nbuffers, nreadbuffers; + + enum zc0301_io_method io; + enum zc0301_stream_state stream; + + struct v4l2_jpegcompression compression; + + struct zc0301_module_param module_param; + + enum zc0301_dev_state state; + u8 users; + + struct mutex dev_mutex, fileop_mutex; + spinlock_t queue_lock; + wait_queue_head_t open, wait_frame, wait_stream; +}; + +/*****************************************************************************/ + +struct zc0301_device* +zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id) +{ + return usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id) ? cam : NULL; +} + +void +zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor) +{ + memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor)); +} + +/*****************************************************************************/ + +#undef DBG +#undef KDBG +#ifdef ZC0301_DEBUG +# define DBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1) \ + dev_err(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) == 2) \ + dev_info(&cam->usbdev->dev, fmt "\n", ## args); \ + else if ((level) >= 3) \ + dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args); \ + } \ +} while (0) +# define KDBG(level, fmt, args...) \ +do { \ + if (debug >= (level)) { \ + if ((level) == 1 || (level) == 2) \ + pr_info("zc0301: " fmt "\n", ## args); \ + else if ((level) == 3) \ + pr_debug("zc0301: [%s:%d] " fmt "\n", __FUNCTION__, \ + __LINE__ , ## args); \ + } \ +} while (0) +# define V4LDBG(level, name, cmd) \ +do { \ + if (debug >= (level)) \ + v4l_print_ioctl(name, cmd); \ +} while (0) +#else +# define DBG(level, fmt, args...) do {;} while(0) +# define KDBG(level, fmt, args...) do {;} while(0) +# define V4LDBG(level, name, cmd) do {;} while(0) +#endif + +#undef PDBG +#define PDBG(fmt, args...) \ +dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n", \ + __FUNCTION__, __LINE__ , ## args) + +#undef PDBGG +#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */ + +#endif /* _ZC0301_H_ */ diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c new file mode 100644 index 000000000000..0fad39754f7a --- /dev/null +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -0,0 +1,2055 @@ +/*************************************************************************** + * Video4Linux2 driver for ZC0301 Image Processor and Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * Informations about the chip internals needed to enable the I2C protocol * + * have been taken from the documentation of the ZC030x Video4Linux1 * + * driver written by Andrew Birkett <andy@nobugs.org> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/moduleparam.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/compiler.h> +#include <linux/ioctl.h> +#include <linux/poll.h> +#include <linux/stat.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/page-flags.h> +#include <linux/byteorder/generic.h> +#include <asm/page.h> +#include <asm/uaccess.h> + +#include "zc0301.h" + +/*****************************************************************************/ + +#define ZC0301_MODULE_NAME "V4L2 driver for ZC0301 " \ + "Image Processor and Control Chip" +#define ZC0301_MODULE_AUTHOR "(C) 2006 Luca Risolia" +#define ZC0301_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" +#define ZC0301_MODULE_LICENSE "GPL" +#define ZC0301_MODULE_VERSION "1:1.03" +#define ZC0301_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 3) + +/*****************************************************************************/ + +MODULE_DEVICE_TABLE(usb, zc0301_id_table); + +MODULE_AUTHOR(ZC0301_MODULE_AUTHOR " " ZC0301_AUTHOR_EMAIL); +MODULE_DESCRIPTION(ZC0301_MODULE_NAME); +MODULE_VERSION(ZC0301_MODULE_VERSION); +MODULE_LICENSE(ZC0301_MODULE_LICENSE); + +static short video_nr[] = {[0 ... ZC0301_MAX_DEVICES-1] = -1}; +module_param_array(video_nr, short, NULL, 0444); +MODULE_PARM_DESC(video_nr, + "\n<-1|n[,...]> Specify V4L2 minor mode number." + "\n -1 = use next available (default)" + "\n n = use minor number n (integer >= 0)" + "\nYou can specify up to " + __MODULE_STRING(ZC0301_MAX_DEVICES) " cameras this way." + "\nFor example:" + "\nvideo_nr=-1,2,-1 would assign minor number 2 to" + "\nthe second registered camera and use auto for the first" + "\none and for every other camera." + "\n"); + +static short force_munmap[] = {[0 ... ZC0301_MAX_DEVICES-1] = + ZC0301_FORCE_MUNMAP}; +module_param_array(force_munmap, bool, NULL, 0444); +MODULE_PARM_DESC(force_munmap, + "\n<0|1[,...]> Force the application to unmap previously" + "\nmapped buffer memory before calling any VIDIOC_S_CROP or" + "\nVIDIOC_S_FMT ioctl's. Not all the applications support" + "\nthis feature. This parameter is specific for each" + "\ndetected camera." + "\n 0 = do not force memory unmapping" + "\n 1 = force memory unmapping (save memory)" + "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"." + "\n"); + +static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] = + ZC0301_FRAME_TIMEOUT}; +module_param_array(frame_timeout, uint, NULL, 0644); +MODULE_PARM_DESC(frame_timeout, + "\n<n[,...]> Timeout for a video frame in seconds." + "\nThis parameter is specific for each detected camera." + "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"." + "\n"); + +#ifdef ZC0301_DEBUG +static unsigned short debug = ZC0301_DEBUG_LEVEL; +module_param(debug, ushort, 0644); +MODULE_PARM_DESC(debug, + "\n<n> Debugging information level, from 0 to 3:" + "\n0 = none (use carefully)" + "\n1 = critical errors" + "\n2 = significant informations" + "\n3 = more verbose messages" + "\nLevel 3 is useful for testing only, when only " + "one device is used." + "\nDefault value is "__MODULE_STRING(ZC0301_DEBUG_LEVEL)"." + "\n"); +#endif + +/*****************************************************************************/ + +static u32 +zc0301_request_buffers(struct zc0301_device* cam, u32 count, + enum zc0301_io_method io) +{ + struct v4l2_pix_format* p = &(cam->sensor.pix_format); + struct v4l2_rect* r = &(cam->sensor.cropcap.bounds); + const size_t imagesize = cam->module_param.force_munmap || + io == IO_READ ? + (p->width * p->height * p->priv) / 8 : + (r->width * r->height * p->priv) / 8; + void* buff = NULL; + u32 i; + + if (count > ZC0301_MAX_FRAMES) + count = ZC0301_MAX_FRAMES; + + cam->nbuffers = count; + while (cam->nbuffers > 0) { + if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize)))) + break; + cam->nbuffers--; + } + + for (i = 0; i < cam->nbuffers; i++) { + cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.index = i; + cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize); + cam->frame[i].buf.length = imagesize; + cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cam->frame[i].buf.sequence = 0; + cam->frame[i].buf.field = V4L2_FIELD_NONE; + cam->frame[i].buf.memory = V4L2_MEMORY_MMAP; + cam->frame[i].buf.flags = 0; + } + + return cam->nbuffers; +} + + +static void zc0301_release_buffers(struct zc0301_device* cam) +{ + if (cam->nbuffers) { + vfree(cam->frame[0].bufmem); + cam->nbuffers = 0; + } + cam->frame_current = NULL; +} + + +static void zc0301_empty_framequeues(struct zc0301_device* cam) +{ + u32 i; + + INIT_LIST_HEAD(&cam->inqueue); + INIT_LIST_HEAD(&cam->outqueue); + + for (i = 0; i < ZC0301_MAX_FRAMES; i++) { + cam->frame[i].state = F_UNUSED; + cam->frame[i].buf.bytesused = 0; + } +} + + +static void zc0301_requeue_outqueue(struct zc0301_device* cam) +{ + struct zc0301_frame_t *i; + + list_for_each_entry(i, &cam->outqueue, frame) { + i->state = F_QUEUED; + list_add(&i->frame, &cam->inqueue); + } + + INIT_LIST_HEAD(&cam->outqueue); +} + + +static void zc0301_queue_unusedframes(struct zc0301_device* cam) +{ + unsigned long lock_flags; + u32 i; + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].state == F_UNUSED) { + cam->frame[i].state = F_QUEUED; + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[i].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + } +} + +/*****************************************************************************/ + +int zc0301_write_reg(struct zc0301_device* cam, u16 index, u16 value) +{ + struct usb_device* udev = cam->usbdev; + int res; + + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0xa0, 0x40, + value, index, NULL, 0, ZC0301_CTRL_TIMEOUT); + if (res < 0) { + DBG(3, "Failed to write a register (index 0x%04X, " + "value 0x%02X, error %d)",index, value, res); + return -1; + } + + return 0; +} + + +int zc0301_read_reg(struct zc0301_device* cam, u16 index) +{ + struct usb_device* udev = cam->usbdev; + u8* buff = cam->control_buffer; + int res; + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0xa1, 0xc0, + 0x0001, index, buff, 1, ZC0301_CTRL_TIMEOUT); + if (res < 0) + DBG(3, "Failed to read a register (index 0x%04X, error %d)", + index, res); + + PDBGG("Read: index 0x%04X, value: 0x%04X", index, (int)(*buff)); + + return (res >= 0) ? (int)(*buff) : -1; +} + + +int zc0301_i2c_read(struct zc0301_device* cam, u16 address, u8 length) +{ + int err = 0, res, r0, r1; + + err += zc0301_write_reg(cam, 0x0092, address); + err += zc0301_write_reg(cam, 0x0090, 0x02); + + msleep(1); + + res = zc0301_read_reg(cam, 0x0091); + if (res < 0) + err += res; + r0 = zc0301_read_reg(cam, 0x0095); + if (r0 < 0) + err += r0; + r1 = zc0301_read_reg(cam, 0x0096); + if (r1 < 0) + err += r1; + + res = (length <= 1) ? r0 : r0 | (r1 << 8); + + if (err) + DBG(3, "I2C read failed at address 0x%04X, value: 0x%04X", + address, res); + + + PDBGG("I2C read: address 0x%04X, value: 0x%04X", address, res); + + return err ? -1 : res; +} + + +int zc0301_i2c_write(struct zc0301_device* cam, u16 address, u16 value) +{ + int err = 0, res; + + err += zc0301_write_reg(cam, 0x0092, address); + err += zc0301_write_reg(cam, 0x0093, value & 0xff); + err += zc0301_write_reg(cam, 0x0094, value >> 8); + err += zc0301_write_reg(cam, 0x0090, 0x01); + + msleep(1); + + res = zc0301_read_reg(cam, 0x0091); + if (res < 0) + err += res; + + if (err) + DBG(3, "I2C write failed at address 0x%04X, value: 0x%04X", + address, value); + + PDBGG("I2C write: address 0x%04X, value: 0x%04X", address, value); + + return err ? -1 : 0; +} + +/*****************************************************************************/ + +static void zc0301_urb_complete(struct urb *urb, struct pt_regs* regs) +{ + struct zc0301_device* cam = urb->context; + struct zc0301_frame_t** f; + size_t imagesize; + u8 i; + int err = 0; + + if (urb->status == -ENOENT) + return; + + f = &cam->frame_current; + + if (cam->stream == STREAM_INTERRUPT) { + cam->stream = STREAM_OFF; + if ((*f)) + (*f)->state = F_QUEUED; + DBG(3, "Stream interrupted"); + wake_up(&cam->wait_stream); + } + + if (cam->state & DEV_DISCONNECTED) + return; + + if (cam->state & DEV_MISCONFIGURED) { + wake_up_interruptible(&cam->wait_frame); + return; + } + + if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue)) + goto resubmit_urb; + + if (!(*f)) + (*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t, + frame); + + imagesize = (cam->sensor.pix_format.width * + cam->sensor.pix_format.height * + cam->sensor.pix_format.priv) / 8; + + for (i = 0; i < urb->number_of_packets; i++) { + unsigned int len, status; + void *pos; + u16* soi; + u8 sof; + + len = urb->iso_frame_desc[i].actual_length; + status = urb->iso_frame_desc[i].status; + pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer; + + if (status) { + DBG(3, "Error in isochronous frame"); + (*f)->state = F_ERROR; + continue; + } + + sof = (*(soi = pos) == 0xd8ff); + + PDBGG("Isochrnous frame: length %u, #%u i,", len, i); + + if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR) +start_of_frame: + if (sof) { + (*f)->state = F_GRABBING; + (*f)->buf.bytesused = 0; + do_gettimeofday(&(*f)->buf.timestamp); + DBG(3, "SOF detected: new video frame"); + } + + if ((*f)->state == F_GRABBING) { + if (sof && (*f)->buf.bytesused) + goto end_of_frame; + + if ((*f)->buf.bytesused + len > imagesize) { + DBG(3, "Video frame size exceeded"); + (*f)->state = F_ERROR; + continue; + } + + memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, len); + (*f)->buf.bytesused += len; + + if ((*f)->buf.bytesused == imagesize) { + u32 b; +end_of_frame: + b = (*f)->buf.bytesused; + (*f)->state = F_DONE; + (*f)->buf.sequence= ++cam->frame_count; + spin_lock(&cam->queue_lock); + list_move_tail(&(*f)->frame, &cam->outqueue); + if (!list_empty(&cam->inqueue)) + (*f) = list_entry(cam->inqueue.next, + struct zc0301_frame_t, + frame); + else + (*f) = NULL; + spin_unlock(&cam->queue_lock); + DBG(3, "Video frame captured: : %lu bytes", + (unsigned long)(b)); + + if (!(*f)) + goto resubmit_urb; + + if (sof) + goto start_of_frame; + } + } + } + +resubmit_urb: + urb->dev = cam->usbdev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0 && err != -EPERM) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "usb_submit_urb() failed"); + } + + wake_up_interruptible(&cam->wait_frame); +} + + +static int zc0301_start_transfer(struct zc0301_device* cam) +{ + struct usb_device *udev = cam->usbdev; + struct urb* urb; + const unsigned int wMaxPacketSize[] = {0, 128, 192, 256, 384, + 512, 768, 1023}; + const unsigned int psz = wMaxPacketSize[ZC0301_ALTERNATE_SETTING]; + s8 i, j; + int err = 0; + + for (i = 0; i < ZC0301_URBS; i++) { + cam->transfer_buffer[i] = kzalloc(ZC0301_ISO_PACKETS * psz, + GFP_KERNEL); + if (!cam->transfer_buffer[i]) { + err = -ENOMEM; + DBG(1, "Not enough memory"); + goto free_buffers; + } + } + + for (i = 0; i < ZC0301_URBS; i++) { + urb = usb_alloc_urb(ZC0301_ISO_PACKETS, GFP_KERNEL); + cam->urb[i] = urb; + if (!urb) { + err = -ENOMEM; + DBG(1, "usb_alloc_urb() failed"); + goto free_urbs; + } + urb->dev = udev; + urb->context = cam; + urb->pipe = usb_rcvisocpipe(udev, 1); + urb->transfer_flags = URB_ISO_ASAP; + urb->number_of_packets = ZC0301_ISO_PACKETS; + urb->complete = zc0301_urb_complete; + urb->transfer_buffer = cam->transfer_buffer[i]; + urb->transfer_buffer_length = psz * ZC0301_ISO_PACKETS; + urb->interval = 1; + for (j = 0; j < ZC0301_ISO_PACKETS; j++) { + urb->iso_frame_desc[j].offset = psz * j; + urb->iso_frame_desc[j].length = psz; + } + } + + err = usb_set_interface(udev, 0, ZC0301_ALTERNATE_SETTING); + if (err) { + DBG(1, "usb_set_interface() failed"); + goto free_urbs; + } + + cam->frame_current = NULL; + + for (i = 0; i < ZC0301_URBS; i++) { + err = usb_submit_urb(cam->urb[i], GFP_KERNEL); + if (err) { + for (j = i-1; j >= 0; j--) + usb_kill_urb(cam->urb[j]); + DBG(1, "usb_submit_urb() failed, error %d", err); + goto free_urbs; + } + } + + return 0; + +free_urbs: + for (i = 0; (i < ZC0301_URBS) && cam->urb[i]; i++) + usb_free_urb(cam->urb[i]); + +free_buffers: + for (i = 0; (i < ZC0301_URBS) && cam->transfer_buffer[i]; i++) + kfree(cam->transfer_buffer[i]); + + return err; +} + + +static int zc0301_stop_transfer(struct zc0301_device* cam) +{ + struct usb_device *udev = cam->usbdev; + s8 i; + int err = 0; + + if (cam->state & DEV_DISCONNECTED) + return 0; + + for (i = ZC0301_URBS-1; i >= 0; i--) { + usb_kill_urb(cam->urb[i]); + usb_free_urb(cam->urb[i]); + kfree(cam->transfer_buffer[i]); + } + + err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */ + if (err) + DBG(3, "usb_set_interface() failed"); + + return err; +} + + +static int zc0301_stream_interrupt(struct zc0301_device* cam) +{ + long timeout; + + cam->stream = STREAM_INTERRUPT; + timeout = wait_event_timeout(cam->wait_stream, + (cam->stream == STREAM_OFF) || + (cam->state & DEV_DISCONNECTED), + ZC0301_URB_TIMEOUT); + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + else if (cam->stream != STREAM_OFF) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "URB timeout reached. The camera is misconfigured. To " + "use it, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + return 0; +} + +/*****************************************************************************/ + +static int +zc0301_set_compression(struct zc0301_device* cam, + struct v4l2_jpegcompression* compression) +{ + int r, err = 0; + + if ((r = zc0301_read_reg(cam, 0x0008)) < 0) + err += r; + err += zc0301_write_reg(cam, 0x0008, r | 0x11 | compression->quality); + + return err ? -EIO : 0; +} + + +static int zc0301_init(struct zc0301_device* cam) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + struct v4l2_queryctrl *qctrl; + struct v4l2_rect* rect; + u8 i = 0; + int err = 0; + + if (!(cam->state & DEV_INITIALIZED)) { + init_waitqueue_head(&cam->open); + qctrl = s->qctrl; + rect = &(s->cropcap.defrect); + cam->compression.quality = ZC0301_COMPRESSION_QUALITY; + } else { /* use current values */ + qctrl = s->_qctrl; + rect = &(s->_rect); + } + + if (s->init) { + err = s->init(cam); + if (err) { + DBG(3, "Sensor initialization failed"); + return err; + } + } + + if ((err = zc0301_set_compression(cam, &cam->compression))) { + DBG(3, "set_compression() failed"); + return err; + } + + if (s->set_crop) + if ((err = s->set_crop(cam, rect))) { + DBG(3, "set_crop() failed"); + return err; + } + + if (s->set_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && + !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { + ctrl.id = s->qctrl[i].id; + ctrl.value = qctrl[i].default_value; + err = s->set_ctrl(cam, &ctrl); + if (err) { + DBG(3, "Set %s control failed", + s->qctrl[i].name); + return err; + } + DBG(3, "Image sensor supports '%s' control", + s->qctrl[i].name); + } + } + + if (!(cam->state & DEV_INITIALIZED)) { + mutex_init(&cam->fileop_mutex); + spin_lock_init(&cam->queue_lock); + init_waitqueue_head(&cam->wait_frame); + init_waitqueue_head(&cam->wait_stream); + cam->nreadbuffers = 2; + memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); + memcpy(&(s->_rect), &(s->cropcap.defrect), + sizeof(struct v4l2_rect)); + cam->state |= DEV_INITIALIZED; + } + + DBG(2, "Initialization succeeded"); + return 0; +} + + +static void zc0301_release_resources(struct zc0301_device* cam) +{ + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + video_set_drvdata(cam->v4ldev, NULL); + video_unregister_device(cam->v4ldev); + kfree(cam->control_buffer); +} + +/*****************************************************************************/ + +static int zc0301_open(struct inode* inode, struct file* filp) +{ + struct zc0301_device* cam; + int err = 0; + + /* + This is the only safe way to prevent race conditions with + disconnect + */ + if (!down_read_trylock(&zc0301_disconnect)) + return -ERESTARTSYS; + + cam = video_get_drvdata(video_devdata(filp)); + + if (mutex_lock_interruptible(&cam->dev_mutex)) { + up_read(&zc0301_disconnect); + return -ERESTARTSYS; + } + + if (cam->users) { + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + if ((filp->f_flags & O_NONBLOCK) || + (filp->f_flags & O_NDELAY)) { + err = -EWOULDBLOCK; + goto out; + } + mutex_unlock(&cam->dev_mutex); + err = wait_event_interruptible_exclusive(cam->open, + cam->state & DEV_DISCONNECTED + || !cam->users); + if (err) { + up_read(&zc0301_disconnect); + return err; + } + if (cam->state & DEV_DISCONNECTED) { + up_read(&zc0301_disconnect); + return -ENODEV; + } + mutex_lock(&cam->dev_mutex); + } + + + if (cam->state & DEV_MISCONFIGURED) { + err = zc0301_init(cam); + if (err) { + DBG(1, "Initialization failed again. " + "I will retry on next open()."); + goto out; + } + cam->state &= ~DEV_MISCONFIGURED; + } + + if ((err = zc0301_start_transfer(cam))) + goto out; + + filp->private_data = cam; + cam->users++; + cam->io = IO_NONE; + cam->stream = STREAM_OFF; + cam->nbuffers = 0; + cam->frame_count = 0; + zc0301_empty_framequeues(cam); + + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + +out: + mutex_unlock(&cam->dev_mutex); + up_read(&zc0301_disconnect); + return err; +} + + +static int zc0301_release(struct inode* inode, struct file* filp) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + + mutex_lock(&cam->dev_mutex); /* prevent disconnect() to be called */ + + zc0301_stop_transfer(cam); + + zc0301_release_buffers(cam); + + if (cam->state & DEV_DISCONNECTED) { + zc0301_release_resources(cam); + usb_put_dev(cam->usbdev); + mutex_unlock(&cam->dev_mutex); + kfree(cam); + return 0; + } + + cam->users--; + wake_up_interruptible_nr(&cam->open, 1); + + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + + mutex_unlock(&cam->dev_mutex); + + return 0; +} + + +static ssize_t +zc0301_read(struct file* filp, char __user * buf, size_t count, loff_t* f_pos) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_frame_t* f, * i; + unsigned long lock_flags; + long timeout; + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io == IO_MMAP) { + DBG(3, "Close and open the device again to choose the read " + "method"); + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + if (cam->io == IO_NONE) { + if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) { + DBG(1, "read() failed, not enough memory"); + mutex_unlock(&cam->fileop_mutex); + return -ENOMEM; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (list_empty(&cam->inqueue)) { + if (!list_empty(&cam->outqueue)) + zc0301_empty_framequeues(cam); + zc0301_queue_unusedframes(cam); + } + + if (!count) { + mutex_unlock(&cam->fileop_mutex); + return 0; + } + + if (list_empty(&cam->outqueue)) { + if (filp->f_flags & O_NONBLOCK) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) { + mutex_unlock(&cam->fileop_mutex); + return timeout; + } + if (cam->state & DEV_DISCONNECTED) { + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + if (!timeout || (cam->state & DEV_MISCONFIGURED)) { + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + } + + f = list_entry(cam->outqueue.prev, struct zc0301_frame_t, frame); + + if (count > f->buf.bytesused) + count = f->buf.bytesused; + + if (copy_to_user(buf, f->bufmem, count)) { + err = -EFAULT; + goto exit; + } + *f_pos += count; + +exit: + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(i, &cam->outqueue, frame) + i->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + zc0301_queue_unusedframes(cam); + + PDBGG("Frame #%lu, bytes read: %zu", + (unsigned long)f->buf.index, count); + + mutex_unlock(&cam->fileop_mutex); + + return err ? err : count; +} + + +static unsigned int zc0301_poll(struct file *filp, poll_table *wait) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + struct zc0301_frame_t* f; + unsigned long lock_flags; + unsigned int mask = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return POLLERR; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + goto error; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + goto error; + } + + if (cam->io == IO_NONE) { + if (!zc0301_request_buffers(cam, cam->nreadbuffers, IO_READ)) { + DBG(1, "poll() failed, not enough memory"); + goto error; + } + cam->io = IO_READ; + cam->stream = STREAM_ON; + } + + if (cam->io == IO_READ) { + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_for_each_entry(f, &cam->outqueue, frame) + f->state = F_UNUSED; + INIT_LIST_HEAD(&cam->outqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + zc0301_queue_unusedframes(cam); + } + + poll_wait(filp, &cam->wait_frame, wait); + + if (!list_empty(&cam->outqueue)) + mask |= POLLIN | POLLRDNORM; + + mutex_unlock(&cam->fileop_mutex); + + return mask; + +error: + mutex_unlock(&cam->fileop_mutex); + return POLLERR; +} + + +static void zc0301_vm_open(struct vm_area_struct* vma) +{ + struct zc0301_frame_t* f = vma->vm_private_data; + f->vma_use_count++; +} + + +static void zc0301_vm_close(struct vm_area_struct* vma) +{ + /* NOTE: buffers are not freed here */ + struct zc0301_frame_t* f = vma->vm_private_data; + f->vma_use_count--; +} + + +static struct vm_operations_struct zc0301_vm_ops = { + .open = zc0301_vm_open, + .close = zc0301_vm_close, +}; + + +static int zc0301_mmap(struct file* filp, struct vm_area_struct *vma) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start; + void *pos; + u32 i; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(cam->frame[0].buf.length)) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) { + if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == cam->nbuffers) { + mutex_unlock(&cam->fileop_mutex); + return -EINVAL; + } + + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; + + pos = cam->frame[i].bufmem; + while (size > 0) { /* size is page-aligned */ + if (vm_insert_page(vma, start, vmalloc_to_page(pos))) { + mutex_unlock(&cam->fileop_mutex); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &zc0301_vm_ops; + vma->vm_private_data = &cam->frame[i]; + + zc0301_vm_open(vma); + + mutex_unlock(&cam->fileop_mutex); + + return 0; +} + +/*****************************************************************************/ + +static int +zc0301_vidioc_querycap(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_capability cap = { + .driver = "zc0301", + .version = ZC0301_MODULE_VERSION_CODE, + .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING, + }; + + strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card)); + if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0) + strlcpy(cap.bus_info, cam->usbdev->dev.bus_id, + sizeof(cap.bus_info)); + + if (copy_to_user(arg, &cap, sizeof(cap))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_enuminput(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_input i; + + if (copy_from_user(&i, arg, sizeof(i))) + return -EFAULT; + + if (i.index) + return -EINVAL; + + memset(&i, 0, sizeof(i)); + strcpy(i.name, "Camera"); + i.type = V4L2_INPUT_TYPE_CAMERA; + + if (copy_to_user(arg, &i, sizeof(i))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_g_input(struct zc0301_device* cam, void __user * arg) +{ + int index = 0; + + if (copy_to_user(arg, &index, sizeof(index))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_input(struct zc0301_device* cam, void __user * arg) +{ + int index; + + if (copy_from_user(&index, arg, sizeof(index))) + return -EFAULT; + + if (index != 0) + return -EINVAL; + + return 0; +} + + +static int +zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_queryctrl qc; + u8 i; + + if (copy_from_user(&qc, arg, sizeof(qc))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (qc.id && qc.id == s->qctrl[i].id) { + memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); + if (copy_to_user(arg, &qc, sizeof(qc))) + return -EFAULT; + return 0; + } + + return -EINVAL; +} + + +static int +zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + int err = 0; + u8 i; + + if (!s->get_ctrl && !s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + if (!s->get_ctrl) { + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + ctrl.value = s->_qctrl[i].default_value; + goto exit; + } + return -EINVAL; + } else + err = s->get_ctrl(cam, &ctrl); + +exit: + if (copy_to_user(arg, &ctrl, sizeof(ctrl))) + return -EFAULT; + + return err; +} + + +static int +zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_control ctrl; + u8 i; + int err = 0; + + if (!s->set_ctrl) + return -EINVAL; + + if (copy_from_user(&ctrl, arg, sizeof(ctrl))) + return -EFAULT; + + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (ctrl.id == s->qctrl[i].id) { + if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED) + return -EINVAL; + if (ctrl.value < s->qctrl[i].minimum || + ctrl.value > s->qctrl[i].maximum) + return -ERANGE; + ctrl.value -= ctrl.value % s->qctrl[i].step; + break; + } + + if ((err = s->set_ctrl(cam, &ctrl))) + return err; + + s->_qctrl[i].default_value = ctrl.value; + + return 0; +} + + +static int +zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_cropcap* cc = &(cam->sensor.cropcap); + + cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + cc->pixelaspect.numerator = 1; + cc->pixelaspect.denominator = 1; + + if (copy_to_user(arg, cc, sizeof(*cc))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_crop crop = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + }; + + memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect)); + + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_crop crop; + struct v4l2_rect* rect; + struct v4l2_rect* bounds = &(s->cropcap.bounds); + const enum zc0301_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&crop, arg, sizeof(crop))) + return -EFAULT; + + rect = &(crop.c); + + if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_CROP failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + if (!s->set_crop) { + memcpy(rect, &(s->_rect), sizeof(*rect)); + if (copy_to_user(arg, &crop, sizeof(crop))) + return -EFAULT; + return 0; + } + + rect->left &= ~7L; + rect->top &= ~7L; + if (rect->width < 8) + rect->width = 8; + if (rect->height < 8) + rect->height = 8; + if (rect->width > bounds->width) + rect->width = bounds->width; + if (rect->height > bounds->height) + rect->height = bounds->height; + if (rect->left < bounds->left) + rect->left = bounds->left; + if (rect->top < bounds->top) + rect->top = bounds->top; + if (rect->left + rect->width > bounds->left + bounds->width) + rect->left = bounds->left+bounds->width - rect->width; + if (rect->top + rect->height > bounds->top + bounds->height) + rect->top = bounds->top+bounds->height - rect->height; + rect->width &= ~7L; + rect->height &= ~7L; + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &crop, sizeof(crop))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + zc0301_release_buffers(cam); + + if (s->set_crop) + err += s->set_crop(cam, rect); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + s->pix_format.width = rect->width; + s->pix_format.height = rect->height; + memcpy(&(s->_rect), rect, sizeof(*rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + zc0301_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + zc0301_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +zc0301_vidioc_enum_fmt(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_fmtdesc fmtd; + + if (copy_from_user(&fmtd, arg, sizeof(fmtd))) + return -EFAULT; + + if (fmtd.index == 0) { + strcpy(fmtd.description, "JPEG"); + fmtd.pixelformat = V4L2_PIX_FMT_JPEG; + fmtd.flags = V4L2_FMT_FLAG_COMPRESSED; + } else + return -EINVAL; + + fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + memset(&fmtd.reserved, 0, sizeof(fmtd.reserved)); + + if (copy_to_user(arg, &fmtd, sizeof(fmtd))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_format format; + struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format); + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + pfmt->bytesperline = 0; + pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8); + pfmt->field = V4L2_FIELD_NONE; + memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt)); + + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd, + void __user * arg) +{ + struct zc0301_sensor* s = &cam->sensor; + struct v4l2_format format; + struct v4l2_pix_format* pix; + struct v4l2_pix_format* pfmt = &(s->pix_format); + struct v4l2_rect* bounds = &(s->cropcap.bounds); + struct v4l2_rect rect; + const enum zc0301_stream_state stream = cam->stream; + const u32 nbuffers = cam->nbuffers; + u32 i; + int err = 0; + + if (copy_from_user(&format, arg, sizeof(format))) + return -EFAULT; + + pix = &(format.fmt.pix); + + if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memcpy(&rect, &(s->_rect), sizeof(rect)); + + if (!s->set_crop) { + pix->width = rect.width; + pix->height = rect.height; + } else { + rect.width = pix->width; + rect.height = pix->height; + } + + if (rect.width < 8) + rect.width = 8; + if (rect.height < 8) + rect.height = 8; + if (rect.width > bounds->left + bounds->width - rect.left) + rect.width = bounds->left + bounds->width - rect.left; + if (rect.height > bounds->top + bounds->height - rect.top) + rect.height = bounds->top + bounds->height - rect.top; + rect.width &= ~7L; + rect.height &= ~7L; + + pix->width = rect.width; + pix->height = rect.height; + pix->pixelformat = pfmt->pixelformat; + pix->priv = pfmt->priv; + pix->colorspace = pfmt->colorspace; + pix->bytesperline = 0; + pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8); + pix->field = V4L2_FIELD_NONE; + + if (cmd == VIDIOC_TRY_FMT) { + if (copy_to_user(arg, &format, sizeof(format))) + return -EFAULT; + return 0; + } + + if (cam->module_param.force_munmap) + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_S_FMT failed. " + "Unmap the buffers first."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + if (copy_to_user(arg, &format, sizeof(format))) { + cam->stream = stream; + return -EFAULT; + } + + if (cam->module_param.force_munmap || cam->io == IO_READ) + zc0301_release_buffers(cam); + + if (s->set_crop) + err += s->set_crop(cam, &rect); + + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -EIO; + } + + memcpy(pfmt, pix, sizeof(*pix)); + memcpy(&(s->_rect), &rect, sizeof(rect)); + + if ((cam->module_param.force_munmap || cam->io == IO_READ) && + nbuffers != zc0301_request_buffers(cam, nbuffers, cam->io)) { + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " + "use the camera, close and open /dev/video%d again.", + cam->v4ldev->minor); + return -ENOMEM; + } + + if (cam->io == IO_READ) + zc0301_empty_framequeues(cam); + else if (cam->module_param.force_munmap) + zc0301_requeue_outqueue(cam); + + cam->stream = stream; + + return 0; +} + + +static int +zc0301_vidioc_g_jpegcomp(struct zc0301_device* cam, void __user * arg) +{ + if (copy_to_user(arg, &cam->compression, sizeof(cam->compression))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_jpegcompression jc; + const enum zc0301_stream_state stream = cam->stream; + int err = 0; + + if (copy_from_user(&jc, arg, sizeof(jc))) + return -EFAULT; + + if (jc.quality != 0) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + err += zc0301_set_compression(cam, &jc); + if (err) { /* atomic, no rollback in ioctl() */ + cam->state |= DEV_MISCONFIGURED; + DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " + "problems. To use the camera, close and open " + "/dev/video%d again.", cam->v4ldev->minor); + return -EIO; + } + + cam->compression.quality = jc.quality; + + cam->stream = stream; + + return 0; +} + + +static int +zc0301_vidioc_reqbufs(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_requestbuffers rb; + u32 i; + int err; + + if (copy_from_user(&rb, arg, sizeof(rb))) + return -EFAULT; + + if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb.memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (cam->io == IO_READ) { + DBG(3, "Close and open the device again to choose the mmap " + "I/O method"); + return -EINVAL; + } + + for (i = 0; i < cam->nbuffers; i++) + if (cam->frame[i].vma_use_count) { + DBG(3, "VIDIOC_REQBUFS failed. " + "Previous buffers are still mapped."); + return -EINVAL; + } + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + zc0301_empty_framequeues(cam); + + zc0301_release_buffers(cam); + if (rb.count) + rb.count = zc0301_request_buffers(cam, rb.count, IO_MMAP); + + if (copy_to_user(arg, &rb, sizeof(rb))) { + zc0301_release_buffers(cam); + cam->io = IO_NONE; + return -EFAULT; + } + + cam->io = rb.count ? IO_MMAP : IO_NONE; + + return 0; +} + + +static int +zc0301_vidioc_querybuf(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + memcpy(&b, &cam->frame[b.index].buf, sizeof(b)); + + if (cam->frame[b.index].vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (cam->frame[b.index].state == F_DONE) + b.flags |= V4L2_BUF_FLAG_DONE; + else if (cam->frame[b.index].state != F_UNUSED) + b.flags |= V4L2_BUF_FLAG_QUEUED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_qbuf(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_buffer b; + unsigned long lock_flags; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b.index >= cam->nbuffers || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->frame[b.index].state != F_UNUSED) + return -EINVAL; + + cam->frame[b.index].state = F_QUEUED; + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + list_add_tail(&cam->frame[b.index].frame, &cam->inqueue); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + PDBGG("Frame #%lu queued", (unsigned long)b.index); + + return 0; +} + + +static int +zc0301_vidioc_dqbuf(struct zc0301_device* cam, struct file* filp, + void __user * arg) +{ + struct v4l2_buffer b; + struct zc0301_frame_t *f; + unsigned long lock_flags; + long timeout; + + if (copy_from_user(&b, arg, sizeof(b))) + return -EFAULT; + + if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->outqueue)) { + if (cam->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + timeout = wait_event_interruptible_timeout + ( cam->wait_frame, + (!list_empty(&cam->outqueue)) || + (cam->state & DEV_DISCONNECTED) || + (cam->state & DEV_MISCONFIGURED), + cam->module_param.frame_timeout * + 1000 * msecs_to_jiffies(1) ); + if (timeout < 0) + return timeout; + if (cam->state & DEV_DISCONNECTED) + return -ENODEV; + if (!timeout || (cam->state & DEV_MISCONFIGURED)) + return -EIO; + } + + spin_lock_irqsave(&cam->queue_lock, lock_flags); + f = list_entry(cam->outqueue.next, struct zc0301_frame_t, frame); + list_del(cam->outqueue.next); + spin_unlock_irqrestore(&cam->queue_lock, lock_flags); + + f->state = F_UNUSED; + + memcpy(&b, &f->buf, sizeof(b)); + if (f->vma_use_count) + b.flags |= V4L2_BUF_FLAG_MAPPED; + + if (copy_to_user(arg, &b, sizeof(b))) + return -EFAULT; + + PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index); + + return 0; +} + + +static int +zc0301_vidioc_streamon(struct zc0301_device* cam, void __user * arg) +{ + int type; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&cam->inqueue)) + return -EINVAL; + + cam->stream = STREAM_ON; + + DBG(3, "Stream on"); + + return 0; +} + + +static int +zc0301_vidioc_streamoff(struct zc0301_device* cam, void __user * arg) +{ + int type, err; + + if (copy_from_user(&type, arg, sizeof(type))) + return -EFAULT; + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP) + return -EINVAL; + + if (cam->stream == STREAM_ON) + if ((err = zc0301_stream_interrupt(cam))) + return err; + + zc0301_empty_framequeues(cam); + + DBG(3, "Stream off"); + + return 0; +} + + +static int +zc0301_vidioc_g_parm(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + return 0; +} + + +static int +zc0301_vidioc_s_parm(struct zc0301_device* cam, void __user * arg) +{ + struct v4l2_streamparm sp; + + if (copy_from_user(&sp, arg, sizeof(sp))) + return -EFAULT; + + if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp.parm.capture.extendedmode = 0; + + if (sp.parm.capture.readbuffers == 0) + sp.parm.capture.readbuffers = cam->nreadbuffers; + + if (sp.parm.capture.readbuffers > ZC0301_MAX_FRAMES) + sp.parm.capture.readbuffers = ZC0301_MAX_FRAMES; + + if (copy_to_user(arg, &sp, sizeof(sp))) + return -EFAULT; + + cam->nreadbuffers = sp.parm.capture.readbuffers; + + return 0; +} + + +static int zc0301_ioctl_v4l2(struct inode* inode, struct file* filp, + unsigned int cmd, void __user * arg) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + + switch (cmd) { + + case VIDIOC_QUERYCAP: + return zc0301_vidioc_querycap(cam, arg); + + case VIDIOC_ENUMINPUT: + return zc0301_vidioc_enuminput(cam, arg); + + case VIDIOC_G_INPUT: + return zc0301_vidioc_g_input(cam, arg); + + case VIDIOC_S_INPUT: + return zc0301_vidioc_s_input(cam, arg); + + case VIDIOC_QUERYCTRL: + return zc0301_vidioc_query_ctrl(cam, arg); + + case VIDIOC_G_CTRL: + return zc0301_vidioc_g_ctrl(cam, arg); + + case VIDIOC_S_CTRL_OLD: + case VIDIOC_S_CTRL: + return zc0301_vidioc_s_ctrl(cam, arg); + + case VIDIOC_CROPCAP_OLD: + case VIDIOC_CROPCAP: + return zc0301_vidioc_cropcap(cam, arg); + + case VIDIOC_G_CROP: + return zc0301_vidioc_g_crop(cam, arg); + + case VIDIOC_S_CROP: + return zc0301_vidioc_s_crop(cam, arg); + + case VIDIOC_ENUM_FMT: + return zc0301_vidioc_enum_fmt(cam, arg); + + case VIDIOC_G_FMT: + return zc0301_vidioc_g_fmt(cam, arg); + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + return zc0301_vidioc_try_s_fmt(cam, cmd, arg); + + case VIDIOC_G_JPEGCOMP: + return zc0301_vidioc_g_jpegcomp(cam, arg); + + case VIDIOC_S_JPEGCOMP: + return zc0301_vidioc_s_jpegcomp(cam, arg); + + case VIDIOC_REQBUFS: + return zc0301_vidioc_reqbufs(cam, arg); + + case VIDIOC_QUERYBUF: + return zc0301_vidioc_querybuf(cam, arg); + + case VIDIOC_QBUF: + return zc0301_vidioc_qbuf(cam, arg); + + case VIDIOC_DQBUF: + return zc0301_vidioc_dqbuf(cam, filp, arg); + + case VIDIOC_STREAMON: + return zc0301_vidioc_streamon(cam, arg); + + case VIDIOC_STREAMOFF: + return zc0301_vidioc_streamoff(cam, arg); + + case VIDIOC_G_PARM: + return zc0301_vidioc_g_parm(cam, arg); + + case VIDIOC_S_PARM_OLD: + case VIDIOC_S_PARM: + return zc0301_vidioc_s_parm(cam, arg); + + case VIDIOC_G_STD: + case VIDIOC_S_STD: + case VIDIOC_QUERYSTD: + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYMENU: + return -EINVAL; + + default: + return -EINVAL; + + } +} + + +static int zc0301_ioctl(struct inode* inode, struct file* filp, + unsigned int cmd, unsigned long arg) +{ + struct zc0301_device* cam = video_get_drvdata(video_devdata(filp)); + int err = 0; + + if (mutex_lock_interruptible(&cam->fileop_mutex)) + return -ERESTARTSYS; + + if (cam->state & DEV_DISCONNECTED) { + DBG(1, "Device not present"); + mutex_unlock(&cam->fileop_mutex); + return -ENODEV; + } + + if (cam->state & DEV_MISCONFIGURED) { + DBG(1, "The camera is misconfigured. Close and open it " + "again."); + mutex_unlock(&cam->fileop_mutex); + return -EIO; + } + + V4LDBG(3, "zc0301", cmd); + + err = zc0301_ioctl_v4l2(inode, filp, cmd, (void __user *)arg); + + mutex_unlock(&cam->fileop_mutex); + + return err; +} + + +static struct file_operations zc0301_fops = { + .owner = THIS_MODULE, + .open = zc0301_open, + .release = zc0301_release, + .ioctl = zc0301_ioctl, + .read = zc0301_read, + .poll = zc0301_poll, + .mmap = zc0301_mmap, + .llseek = no_llseek, +}; + +/*****************************************************************************/ + +static int +zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct zc0301_device* cam; + static unsigned int dev_nr = 0; + unsigned int i; + int err = 0; + + if (!(cam = kzalloc(sizeof(struct zc0301_device), GFP_KERNEL))) + return -ENOMEM; + + cam->usbdev = udev; + + if (!(cam->control_buffer = kzalloc(4, GFP_KERNEL))) { + DBG(1, "kmalloc() failed"); + err = -ENOMEM; + goto fail; + } + + if (!(cam->v4ldev = video_device_alloc())) { + DBG(1, "video_device_alloc() failed"); + err = -ENOMEM; + goto fail; + } + + mutex_init(&cam->dev_mutex); + + DBG(2, "ZC0301 Image Processor and Control Chip detected " + "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct); + + for (i = 0; zc0301_sensor_table[i]; i++) { + err = zc0301_sensor_table[i](cam); + if (!err) + break; + } + + if (!err) + DBG(2, "%s image sensor detected", cam->sensor.name); + else { + DBG(1, "No supported image sensor detected"); + err = -ENODEV; + goto fail; + } + + if (zc0301_init(cam)) { + DBG(1, "Initialization failed. I will retry on open()."); + cam->state |= DEV_MISCONFIGURED; + } + + strcpy(cam->v4ldev->name, "ZC0301 PC Camera"); + cam->v4ldev->owner = THIS_MODULE; + cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES; + cam->v4ldev->hardware = 0; + cam->v4ldev->fops = &zc0301_fops; + cam->v4ldev->minor = video_nr[dev_nr]; + cam->v4ldev->release = video_device_release; + video_set_drvdata(cam->v4ldev, cam); + + mutex_lock(&cam->dev_mutex); + + err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER, + video_nr[dev_nr]); + if (err) { + DBG(1, "V4L2 device registration failed"); + if (err == -ENFILE && video_nr[dev_nr] == -1) + DBG(1, "Free /dev/videoX node not found"); + video_nr[dev_nr] = -1; + dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0; + mutex_unlock(&cam->dev_mutex); + goto fail; + } + + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + + cam->module_param.force_munmap = force_munmap[dev_nr]; + cam->module_param.frame_timeout = frame_timeout[dev_nr]; + + dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0; + + usb_set_intfdata(intf, cam); + + mutex_unlock(&cam->dev_mutex); + + return 0; + +fail: + if (cam) { + kfree(cam->control_buffer); + if (cam->v4ldev) + video_device_release(cam->v4ldev); + kfree(cam); + } + return err; +} + + +static void zc0301_usb_disconnect(struct usb_interface* intf) +{ + struct zc0301_device* cam = usb_get_intfdata(intf); + + if (!cam) + return; + + down_write(&zc0301_disconnect); + + mutex_lock(&cam->dev_mutex); + + DBG(2, "Disconnecting %s...", cam->v4ldev->name); + + wake_up_interruptible_all(&cam->open); + + if (cam->users) { + DBG(2, "Device /dev/video%d is open! Deregistration and " + "memory deallocation are deferred on close.", + cam->v4ldev->minor); + cam->state |= DEV_MISCONFIGURED; + zc0301_stop_transfer(cam); + cam->state |= DEV_DISCONNECTED; + wake_up_interruptible(&cam->wait_frame); + wake_up(&cam->wait_stream); + usb_get_dev(cam->usbdev); + } else { + cam->state |= DEV_DISCONNECTED; + zc0301_release_resources(cam); + } + + mutex_unlock(&cam->dev_mutex); + + if (!cam->users) + kfree(cam); + + up_write(&zc0301_disconnect); +} + + +static struct usb_driver zc0301_usb_driver = { + .name = "zc0301", + .id_table = zc0301_id_table, + .probe = zc0301_usb_probe, + .disconnect = zc0301_usb_disconnect, +}; + +/*****************************************************************************/ + +static int __init zc0301_module_init(void) +{ + int err = 0; + + KDBG(2, ZC0301_MODULE_NAME " v" ZC0301_MODULE_VERSION); + KDBG(3, ZC0301_MODULE_AUTHOR); + + if ((err = usb_register(&zc0301_usb_driver))) + KDBG(1, "usb_register() failed"); + + return err; +} + + +static void __exit zc0301_module_exit(void) +{ + usb_deregister(&zc0301_usb_driver); +} + + +module_init(zc0301_module_init); +module_exit(zc0301_module_exit); diff --git a/drivers/media/video/zc0301/zc0301_pas202bcb.c b/drivers/media/video/zc0301/zc0301_pas202bcb.c new file mode 100644 index 000000000000..eaadf0252049 --- /dev/null +++ b/drivers/media/video/zc0301/zc0301_pas202bcb.c @@ -0,0 +1,361 @@ +/*************************************************************************** + * Plug-in for PAS202BCB image sensor connected to the ZC030! Image * + * Processor and Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * Initialization values of the ZC0301 have been taken from the SPCA5XX * + * driver maintained by Michel Xhaard <mxhaard@magic.fr> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +/* + NOTE: Sensor controls are disabled for now, becouse changing them while + streaming sometimes results in out-of-sync video frames. We'll use + the default initialization, until we know how to stop and start video + in the chip. However, the image quality still looks good under various + light conditions. +*/ + +#include <linux/delay.h> +#include "zc0301_sensor.h" + + +static struct zc0301_sensor pas202bcb; + + +static int pas202bcb_init(struct zc0301_device* cam) +{ + int err = 0; + + err += zc0301_write_reg(cam, 0x0002, 0x00); + err += zc0301_write_reg(cam, 0x0003, 0x02); + err += zc0301_write_reg(cam, 0x0004, 0x80); + err += zc0301_write_reg(cam, 0x0005, 0x01); + err += zc0301_write_reg(cam, 0x0006, 0xE0); + err += zc0301_write_reg(cam, 0x0098, 0x00); + err += zc0301_write_reg(cam, 0x009A, 0x03); + err += zc0301_write_reg(cam, 0x011A, 0x00); + err += zc0301_write_reg(cam, 0x011C, 0x03); + err += zc0301_write_reg(cam, 0x009B, 0x01); + err += zc0301_write_reg(cam, 0x009C, 0xE6); + err += zc0301_write_reg(cam, 0x009D, 0x02); + err += zc0301_write_reg(cam, 0x009E, 0x86); + + err += zc0301_i2c_write(cam, 0x02, 0x02); + err += zc0301_i2c_write(cam, 0x0A, 0x01); + err += zc0301_i2c_write(cam, 0x0B, 0x01); + err += zc0301_i2c_write(cam, 0x0D, 0x00); + err += zc0301_i2c_write(cam, 0x12, 0x05); + err += zc0301_i2c_write(cam, 0x13, 0x63); + err += zc0301_i2c_write(cam, 0x15, 0x70); + + err += zc0301_write_reg(cam, 0x0101, 0xB7); + err += zc0301_write_reg(cam, 0x0100, 0x0D); + err += zc0301_write_reg(cam, 0x0189, 0x06); + err += zc0301_write_reg(cam, 0x01AD, 0x00); + err += zc0301_write_reg(cam, 0x01C5, 0x03); + err += zc0301_write_reg(cam, 0x01CB, 0x13); + err += zc0301_write_reg(cam, 0x0250, 0x08); + err += zc0301_write_reg(cam, 0x0301, 0x08); + err += zc0301_write_reg(cam, 0x018D, 0x70); + err += zc0301_write_reg(cam, 0x0008, 0x03); + err += zc0301_write_reg(cam, 0x01C6, 0x04); + err += zc0301_write_reg(cam, 0x01CB, 0x07); + err += zc0301_write_reg(cam, 0x0120, 0x11); + err += zc0301_write_reg(cam, 0x0121, 0x37); + err += zc0301_write_reg(cam, 0x0122, 0x58); + err += zc0301_write_reg(cam, 0x0123, 0x79); + err += zc0301_write_reg(cam, 0x0124, 0x91); + err += zc0301_write_reg(cam, 0x0125, 0xA6); + err += zc0301_write_reg(cam, 0x0126, 0xB8); + err += zc0301_write_reg(cam, 0x0127, 0xC7); + err += zc0301_write_reg(cam, 0x0128, 0xD3); + err += zc0301_write_reg(cam, 0x0129, 0xDE); + err += zc0301_write_reg(cam, 0x012A, 0xE6); + err += zc0301_write_reg(cam, 0x012B, 0xED); + err += zc0301_write_reg(cam, 0x012C, 0xF3); + err += zc0301_write_reg(cam, 0x012D, 0xF8); + err += zc0301_write_reg(cam, 0x012E, 0xFB); + err += zc0301_write_reg(cam, 0x012F, 0xFF); + err += zc0301_write_reg(cam, 0x0130, 0x26); + err += zc0301_write_reg(cam, 0x0131, 0x23); + err += zc0301_write_reg(cam, 0x0132, 0x20); + err += zc0301_write_reg(cam, 0x0133, 0x1C); + err += zc0301_write_reg(cam, 0x0134, 0x16); + err += zc0301_write_reg(cam, 0x0135, 0x13); + err += zc0301_write_reg(cam, 0x0136, 0x10); + err += zc0301_write_reg(cam, 0x0137, 0x0D); + err += zc0301_write_reg(cam, 0x0138, 0x0B); + err += zc0301_write_reg(cam, 0x0139, 0x09); + err += zc0301_write_reg(cam, 0x013A, 0x07); + err += zc0301_write_reg(cam, 0x013B, 0x06); + err += zc0301_write_reg(cam, 0x013C, 0x05); + err += zc0301_write_reg(cam, 0x013D, 0x04); + err += zc0301_write_reg(cam, 0x013E, 0x03); + err += zc0301_write_reg(cam, 0x013F, 0x02); + err += zc0301_write_reg(cam, 0x010A, 0x4C); + err += zc0301_write_reg(cam, 0x010B, 0xF5); + err += zc0301_write_reg(cam, 0x010C, 0xFF); + err += zc0301_write_reg(cam, 0x010D, 0xF9); + err += zc0301_write_reg(cam, 0x010E, 0x51); + err += zc0301_write_reg(cam, 0x010F, 0xF5); + err += zc0301_write_reg(cam, 0x0110, 0xFB); + err += zc0301_write_reg(cam, 0x0111, 0xED); + err += zc0301_write_reg(cam, 0x0112, 0x5F); + err += zc0301_write_reg(cam, 0x0180, 0x00); + err += zc0301_write_reg(cam, 0x0019, 0x00); + err += zc0301_write_reg(cam, 0x0087, 0x20); + err += zc0301_write_reg(cam, 0x0088, 0x21); + + err += zc0301_i2c_write(cam, 0x20, 0x02); + err += zc0301_i2c_write(cam, 0x21, 0x1B); + err += zc0301_i2c_write(cam, 0x03, 0x44); + err += zc0301_i2c_write(cam, 0x0E, 0x01); + err += zc0301_i2c_write(cam, 0x0F, 0x00); + + err += zc0301_write_reg(cam, 0x01A9, 0x14); + err += zc0301_write_reg(cam, 0x01AA, 0x24); + err += zc0301_write_reg(cam, 0x0190, 0x00); + err += zc0301_write_reg(cam, 0x0191, 0x02); + err += zc0301_write_reg(cam, 0x0192, 0x1B); + err += zc0301_write_reg(cam, 0x0195, 0x00); + err += zc0301_write_reg(cam, 0x0196, 0x00); + err += zc0301_write_reg(cam, 0x0197, 0x4D); + err += zc0301_write_reg(cam, 0x018C, 0x10); + err += zc0301_write_reg(cam, 0x018F, 0x20); + err += zc0301_write_reg(cam, 0x001D, 0x44); + err += zc0301_write_reg(cam, 0x001E, 0x6F); + err += zc0301_write_reg(cam, 0x001F, 0xAD); + err += zc0301_write_reg(cam, 0x0020, 0xEB); + err += zc0301_write_reg(cam, 0x0087, 0x0F); + err += zc0301_write_reg(cam, 0x0088, 0x0E); + err += zc0301_write_reg(cam, 0x0180, 0x40); + err += zc0301_write_reg(cam, 0x0192, 0x1B); + err += zc0301_write_reg(cam, 0x0191, 0x02); + err += zc0301_write_reg(cam, 0x0190, 0x00); + err += zc0301_write_reg(cam, 0x0116, 0x1D); + err += zc0301_write_reg(cam, 0x0117, 0x40); + err += zc0301_write_reg(cam, 0x0118, 0x99); + err += zc0301_write_reg(cam, 0x0180, 0x42); + err += zc0301_write_reg(cam, 0x0116, 0x1D); + err += zc0301_write_reg(cam, 0x0117, 0x40); + err += zc0301_write_reg(cam, 0x0118, 0x99); + err += zc0301_write_reg(cam, 0x0007, 0x00); + + err += zc0301_i2c_write(cam, 0x11, 0x01); + + msleep(100); + + return err; +} + + +static int pas202bcb_get_ctrl(struct zc0301_device* cam, + struct v4l2_control* ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + { + int r1 = zc0301_i2c_read(cam, 0x04, 1), + r2 = zc0301_i2c_read(cam, 0x05, 1); + if (r1 < 0 || r2 < 0) + return -EIO; + ctrl->value = (r1 << 6) | (r2 & 0x3f); + } + return 0; + case V4L2_CID_RED_BALANCE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x09, 1)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x07, 1)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case V4L2_CID_GAIN: + if ((ctrl->value = zc0301_i2c_read(cam, 0x10, 1)) < 0) + return -EIO; + ctrl->value &= 0x1f; + return 0; + case ZC0301_V4L2_CID_GREEN_BALANCE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x08, 1)) < 0) + return -EIO; + ctrl->value &= 0x0f; + return 0; + case ZC0301_V4L2_CID_DAC_MAGNITUDE: + if ((ctrl->value = zc0301_i2c_read(cam, 0x0c, 1)) < 0) + return -EIO; + return 0; + default: + return -EINVAL; + } +} + + +static int pas202bcb_set_ctrl(struct zc0301_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += zc0301_i2c_write(cam, 0x04, ctrl->value >> 6); + err += zc0301_i2c_write(cam, 0x05, ctrl->value & 0x3f); + break; + case V4L2_CID_RED_BALANCE: + err += zc0301_i2c_write(cam, 0x09, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += zc0301_i2c_write(cam, 0x07, ctrl->value); + break; + case V4L2_CID_GAIN: + err += zc0301_i2c_write(cam, 0x10, ctrl->value); + break; + case ZC0301_V4L2_CID_GREEN_BALANCE: + err += zc0301_i2c_write(cam, 0x08, ctrl->value); + break; + case ZC0301_V4L2_CID_DAC_MAGNITUDE: + err += zc0301_i2c_write(cam, 0x0c, ctrl->value); + break; + default: + return -EINVAL; + } + err += zc0301_i2c_write(cam, 0x11, 0x01); + + return err ? -EIO : 0; +} + + +static struct zc0301_sensor pas202bcb = { + .name = "PAS202BCB", + .init = &pas202bcb_init, + .qctrl = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x01e5, + .maximum = 0x3fff, + .step = 0x0001, + .default_value = 0x01e5, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x1f, + .step = 0x01, + .default_value = 0x0c, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = ZC0301_V4L2_CID_DAC_MAGNITUDE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "DAC magnitude", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x00, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x01, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x05, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = ZC0301_V4L2_CID_GREEN_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "green balance", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x00, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + }, + .get_ctrl = &pas202bcb_get_ctrl, + .set_ctrl = &pas202bcb_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_JPEG, + .priv = 8, + }, +}; + + +int zc0301_probe_pas202bcb(struct zc0301_device* cam) +{ + int r0 = 0, r1 = 0, err = 0; + unsigned int pid = 0; + + err += zc0301_write_reg(cam, 0x0000, 0x01); + err += zc0301_write_reg(cam, 0x0010, 0x0e); + err += zc0301_write_reg(cam, 0x0001, 0x01); + err += zc0301_write_reg(cam, 0x0012, 0x03); + err += zc0301_write_reg(cam, 0x0012, 0x01); + err += zc0301_write_reg(cam, 0x008d, 0x08); + + msleep(10); + + r0 = zc0301_i2c_read(cam, 0x00, 1); + r1 = zc0301_i2c_read(cam, 0x01, 1); + + if (r0 < 0 || r1 < 0 || err) + return -EIO; + + pid = (r0 << 4) | ((r1 & 0xf0) >> 4); + if (pid != 0x017) + return -ENODEV; + + zc0301_attach_sensor(cam, &pas202bcb); + + return 0; +} diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h new file mode 100644 index 000000000000..1f95c28b1015 --- /dev/null +++ b/drivers/media/video/zc0301/zc0301_sensor.h @@ -0,0 +1,103 @@ +/*************************************************************************** + * API for image sensors connected to the ZC030! Image Processor and * + * Control Chip * + * * + * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _ZC0301_SENSOR_H_ +#define _ZC0301_SENSOR_H_ + +#include <linux/usb.h> +#include <linux/videodev.h> +#include <linux/device.h> +#include <linux/stddef.h> +#include <linux/errno.h> +#include <asm/types.h> + +struct zc0301_device; +struct zc0301_sensor; + +/*****************************************************************************/ + +extern int zc0301_probe_pas202bcb(struct zc0301_device* cam); + +#define ZC0301_SENSOR_TABLE \ +/* Weak detections must go at the end of the list */ \ +static int (*zc0301_sensor_table[])(struct zc0301_device*) = { \ + &zc0301_probe_pas202bcb, \ + NULL, \ +}; + +extern struct zc0301_device* +zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id); + +extern void +zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor); + +#define ZC0301_USB_DEVICE(vend, prod, intclass) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (intclass) + +#define ZC0301_ID_TABLE \ +static const struct usb_device_id zc0301_id_table[] = { \ + { ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), }, \ + { ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */ \ + { ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131B */ \ + { ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */ \ + { ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */ \ + { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202BCB */ \ + { ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), }, \ + { ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130D */ \ + { } \ +}; + +/*****************************************************************************/ + +extern int zc0301_write_reg(struct zc0301_device*, u16 index, u16 value); +extern int zc0301_read_reg(struct zc0301_device*, u16 index); +extern int zc0301_i2c_write(struct zc0301_device*, u16 address, u16 value); +extern int zc0301_i2c_read(struct zc0301_device*, u16 address, u8 length); + +/*****************************************************************************/ + +#define ZC0301_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 +#define ZC0301_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE +#define ZC0301_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1 + +struct zc0301_sensor { + char name[32]; + + struct v4l2_queryctrl qctrl[ZC0301_MAX_CTRLS]; + struct v4l2_cropcap cropcap; + struct v4l2_pix_format pix_format; + + int (*init)(struct zc0301_device*); + int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl); + int (*set_ctrl)(struct zc0301_device*, + const struct v4l2_control* ctrl); + int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect); + + /* Private */ + struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS]; + struct v4l2_rect _rect; +}; + +#endif /* _ZC0301_SENSOR_H_ */ diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index 9fe6ad3b6352..0166f555a5ca 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -1,4 +1,4 @@ -/* +/* * zoran - Iomega Buz driver * * Copyright (C) 1999 Rainer Johanni <Rainer@Johanni.de> @@ -395,7 +395,7 @@ struct zoran { struct videocodec *codec; /* video codec */ struct videocodec *vfe; /* video front end */ - struct semaphore resource_lock; /* prevent evil stuff */ + struct mutex resource_lock; /* prevent evil stuff */ u8 initialized; /* flag if zoran has been correctly initalized */ int user; /* number of current users */ diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c index 246e67cd8b51..0a85c9e7fb48 100644 --- a/drivers/media/video/zoran_card.c +++ b/drivers/media/video/zoran_card.c @@ -4,7 +4,7 @@ * Media Labs LML33/LML33R10. * * This part handles card-specific data and detection - * + * * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> * * Currently maintained by: @@ -47,6 +47,7 @@ #include <linux/interrupt.h> #include <linux/video_decoder.h> #include <linux/video_encoder.h> +#include <linux/mutex.h> #include <asm/io.h> @@ -673,7 +674,7 @@ zoran_i2c_client_register (struct i2c_client *client) KERN_DEBUG "%s: i2c_client_register() - driver id = %d\n", ZR_DEVNAME(zr), client->driver->id); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (zr->user > 0) { /* we're already busy, so we keep a reference to @@ -694,7 +695,7 @@ zoran_i2c_client_register (struct i2c_client *client) } clientreg_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -707,7 +708,7 @@ zoran_i2c_client_unregister (struct i2c_client *client) dprintk(2, KERN_DEBUG "%s: i2c_client_unregister()\n", ZR_DEVNAME(zr)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (zr->user > 0) { res = -EBUSY; @@ -722,7 +723,7 @@ zoran_i2c_client_unregister (struct i2c_client *client) snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%d]", zr->id); } clientunreg_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -995,10 +996,7 @@ test_interrupts (struct zoran *zr) static int __devinit zr36057_init (struct zoran *zr) { - u32 *mem; - void *vdev; - unsigned mem_needed; - int j; + int j, err; int two = 2; int zero = 0; @@ -1049,19 +1047,16 @@ zr36057_init (struct zoran *zr) /* allocate memory *before* doing anything to the hardware * in case allocation fails */ - mem_needed = BUZ_NUM_STAT_COM * 4; - mem = kzalloc(mem_needed, GFP_KERNEL); - vdev = (void *) kmalloc(sizeof(struct video_device), GFP_KERNEL); - if (!mem || !vdev) { + zr->stat_com = kzalloc(BUZ_NUM_STAT_COM * 4, GFP_KERNEL); + zr->video_dev = kmalloc(sizeof(struct video_device), GFP_KERNEL); + if (!zr->stat_com || !zr->video_dev) { dprintk(1, KERN_ERR "%s: zr36057_init() - kmalloc (STAT_COM) failed\n", ZR_DEVNAME(zr)); - kfree(vdev); - kfree(mem); - return -ENOMEM; + err = -ENOMEM; + goto exit_free; } - zr->stat_com = mem; for (j = 0; j < BUZ_NUM_STAT_COM; j++) { zr->stat_com[j] = 1; /* mark as unavailable to zr36057 */ } @@ -1069,16 +1064,11 @@ zr36057_init (struct zoran *zr) /* * Now add the template and register the device unit. */ - zr->video_dev = vdev; memcpy(zr->video_dev, &zoran_template, sizeof(zoran_template)); strcpy(zr->video_dev->name, ZR_DEVNAME(zr)); - if (video_register_device(zr->video_dev, VFL_TYPE_GRABBER, - video_nr) < 0) { - zoran_unregister_i2c(zr); - kfree((void *) zr->stat_com); - kfree(vdev); - return -1; - } + err = video_register_device(zr->video_dev, VFL_TYPE_GRABBER, video_nr); + if (err < 0) + goto exit_unregister; zoran_init_hardware(zr); if (*zr_debug > 2) @@ -1092,6 +1082,13 @@ zr36057_init (struct zoran *zr) zr->zoran_proc = NULL; zr->initialized = 1; return 0; + +exit_unregister: + zoran_unregister_i2c(zr); +exit_free: + kfree(zr->stat_com); + kfree(zr->video_dev); + return err; } static void @@ -1121,7 +1118,7 @@ zoran_release (struct zoran *zr) btwrite(0, ZR36057_SPGPPCR); free_irq(zr->pci_dev->irq, zr); /* unmap and free memory */ - kfree((void *) zr->stat_com); + kfree(zr->stat_com); zoran_proc_cleanup(zr); iounmap(zr->zr36057_mem); pci_disable_device(zr->pci_dev); @@ -1206,7 +1203,7 @@ find_zr36057 (void) zr->id = zoran_num; snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); spin_lock_init(&zr->spinlock); - init_MUTEX(&zr->resource_lock); + mutex_init(&zr->resource_lock); if (pci_enable_device(dev)) continue; zr->zr36057_adr = pci_resource_start(zr->pci_dev, 0); diff --git a/drivers/media/video/zoran_card.h b/drivers/media/video/zoran_card.h index e5b6acd3eedc..ad997c30bee5 100644 --- a/drivers/media/video/zoran_card.h +++ b/drivers/media/video/zoran_card.h @@ -4,7 +4,7 @@ * Media Labs LML33/LML33R10. * * This part handles card-specific data and detection - * + * * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> * * Currently maintained by: diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index 4e15afdec4c9..c690b2ee880a 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -4,7 +4,7 @@ * Media Labs LML33/LML33R10. * * This part handles device access (PCI/I2C/codec/...) - * + * * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> * * Currently maintained by: @@ -492,7 +492,7 @@ zr36057_set_vfe (struct zoran *zr, /* (Ronald) don't write this if overlay_mask = NULL */ if (zr->overlay_mask) { /* Write overlay clipping mask data, but don't enable overlay clipping */ - /* RJ: since this makes only sense on the screen, we use + /* RJ: since this makes only sense on the screen, we use * zr->overlay_settings.width instead of video_width */ mask_line_size = (BUZ_MAX_WIDTH + 31) / 32; @@ -819,12 +819,12 @@ zr36057_set_jpg (struct zoran *zr, if (zr->card.vfe_pol.hsync_pol) btor(ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); else - btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); + btand(~ZR36057_VFEHCR_HSPol, ZR36057_VFEHCR); reg = ((tvn->HSyncStart) << ZR36057_HSP_HsyncStart) | (tvn->Wt << ZR36057_HSP_LineTot); btwrite(reg, ZR36057_HSP); reg = ((zr->jpg_settings.img_x + - tvn->HStart + 4) << ZR36057_FHAP_NAX) | + tvn->HStart + 4) << ZR36057_FHAP_NAX) | (zr->jpg_settings.img_width << ZR36057_FHAP_PAX); btwrite(reg, ZR36057_FHAP); @@ -1272,15 +1272,15 @@ error_handler (struct zoran *zr, if (zr->JPEG_error != 1) { /* * First entry: error just happened during normal operation - * + * * In BUZ_MODE_MOTION_COMPRESS: - * + * * Possible glitch in TV signal. In this case we should * stop the codec and wait for good quality signal before * restarting it to avoid further problems - * + * * In BUZ_MODE_MOTION_DECOMPRESS: - * + * * Bad JPEG frame: we have to mark it as processed (codec crashed * and was not able to do it itself), and to remove it from queue. */ diff --git a/drivers/media/video/zoran_device.h b/drivers/media/video/zoran_device.h index f315203d7105..f19705cbdb39 100644 --- a/drivers/media/video/zoran_device.h +++ b/drivers/media/video/zoran_device.h @@ -4,7 +4,7 @@ * Media Labs LML33/LML33R10. * * This part handles card-specific data and detection - * + * * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> * * Currently maintained by: diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 485553be190b..b5a576a37fd2 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -81,6 +81,7 @@ #include <linux/video_decoder.h> #include <linux/video_encoder.h> +#include <linux/mutex.h> #include "zoran.h" #include "zoran_device.h" #include "zoran_card.h" @@ -93,7 +94,7 @@ V4L2_CAP_VIDEO_CAPTURE |\ V4L2_CAP_VIDEO_OUTPUT |\ V4L2_CAP_VIDEO_OVERLAY \ - ) + ) #endif #include <asm/byteorder.h> @@ -164,7 +165,7 @@ const struct zoran_format zoran_formats[] = { #endif .depth = 16, .flags = ZORAN_FORMAT_CAPTURE | - ZORAN_FORMAT_OVERLAY, + ZORAN_FORMAT_OVERLAY, }, { .name = "Hardware-encoded Motion-JPEG", .palette = -1, @@ -669,7 +670,7 @@ jpg_fbuffer_free (struct file *file) j])))); free_page((unsigned long) bus_to_virt - (le32_to_cpu + (le32_to_cpu (fh->jpg_buffers. buffer[i]. frag_tab[2 * j]))); @@ -1292,7 +1293,7 @@ zoran_open (struct inode *inode, /* see fs/device.c - the kernel already locks during open(), * so locking ourselves only causes deadlocks */ - /*down(&zr->resource_lock);*/ + /*mutex_lock(&zr->resource_lock);*/ if (!zr->decoder) { dprintk(1, @@ -1371,7 +1372,7 @@ zoran_open (struct inode *inode, if (zr->user++ == 0) first_open = 1; - /*up(&zr->resource_lock);*/ + /*mutex_unlock(&zr->resource_lock);*/ /* default setup - TODO: look at flags */ if (first_open) { /* First device open */ @@ -1401,7 +1402,7 @@ open_unlock_and_return: /* if there's no device found, we didn't obtain the lock either */ if (zr) { - /*up(&zr->resource_lock);*/ + /*mutex_unlock(&zr->resource_lock);*/ } return res; @@ -1419,7 +1420,7 @@ zoran_close (struct inode *inode, /* kernel locks (fs/device.c), so don't do that ourselves * (prevents deadlocks) */ - /*down(&zr->resource_lock);*/ + /*mutex_lock(&zr->resource_lock);*/ zoran_close_end_session(file); @@ -1466,7 +1467,7 @@ zoran_close (struct inode *inode, } module_put(THIS_MODULE); - /*up(&zr->resource_lock);*/ + /*mutex_unlock(&zr->resource_lock);*/ dprintk(4, KERN_INFO "%s: zoran_close() done\n", ZR_DEVNAME(zr)); @@ -1870,7 +1871,7 @@ zoran_v4l2_buffer_status (struct file *file, static int zoran_set_norm (struct zoran *zr, - int norm) /* VIDEO_MODE_* */ + int norm) /* VIDEO_MODE_* */ { int norm_encoder, on; @@ -2005,9 +2006,9 @@ zoran_set_input (struct zoran *zr, static int zoran_do_ioctl (struct inode *inode, - struct file *file, - unsigned int cmd, - void *arg) + struct file *file, + unsigned int cmd, + void *arg) { struct zoran_fh *fh = file->private_data; struct zoran *zr = fh->zr; @@ -2027,14 +2028,14 @@ zoran_do_ioctl (struct inode *inode, * but moving the free code outside the munmap() handler fixes * all this... If someone knows why, please explain me (Ronald) */ - if (!down_trylock(&zr->resource_lock)) { + if (!!mutex_trylock(&zr->resource_lock)) { /* we obtained it! Let's try to free some things */ if (fh->jpg_buffers.ready_to_be_freed) jpg_fbuffer_free(file); if (fh->v4l_buffers.ready_to_be_freed) v4l_fbuffer_free(file); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); } switch (cmd) { @@ -2051,12 +2052,12 @@ zoran_do_ioctl (struct inode *inode, vcap->channels = zr->card.inputs; vcap->audios = 0; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); vcap->maxwidth = BUZ_MAX_WIDTH; vcap->maxheight = BUZ_MAX_HEIGHT; vcap->minwidth = BUZ_MIN_WIDTH; vcap->minheight = BUZ_MIN_HEIGHT; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -2084,9 +2085,9 @@ zoran_do_ioctl (struct inode *inode, vchan->tuners = 0; vchan->flags = 0; vchan->type = VIDEO_TYPE_CAMERA; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); vchan->norm = zr->norm; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); vchan->channel = channel; return 0; @@ -2094,7 +2095,7 @@ zoran_do_ioctl (struct inode *inode, break; /* RJ: the documentation at http://roadrunner.swansea.linux.org.uk/v4lapi.shtml says: - * + * * * "The VIDIOCSCHAN ioctl takes an integer argument and switches the capture to this input." * * ^^^^^^^ * * The famos BTTV driver has it implemented with a struct video_channel argument @@ -2113,7 +2114,7 @@ zoran_do_ioctl (struct inode *inode, "%s: VIDIOCSCHAN - channel=%d, norm=%d\n", ZR_DEVNAME(zr), vchan->channel, vchan->norm); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if ((res = zoran_set_input(zr, vchan->channel))) goto schan_unlock_and_return; if ((res = zoran_set_norm(zr, vchan->norm))) @@ -2122,7 +2123,7 @@ zoran_do_ioctl (struct inode *inode, /* Make sure the changes come into effect */ res = wait_grab_pending(zr); schan_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } break; @@ -2134,7 +2135,7 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOCGPICT\n", ZR_DEVNAME(zr)); memset(vpict, 0, sizeof(struct video_picture)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); vpict->hue = zr->hue; vpict->brightness = zr->brightness; vpict->contrast = zr->contrast; @@ -2145,7 +2146,7 @@ zoran_do_ioctl (struct inode *inode, } else { vpict->depth = 0; } - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -2180,7 +2181,7 @@ zoran_do_ioctl (struct inode *inode, return -EINVAL; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); decoder_command(zr, DECODER_SET_PICTURE, vpict); @@ -2191,7 +2192,7 @@ zoran_do_ioctl (struct inode *inode, fh->overlay_settings.format = &zoran_formats[i]; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -2204,9 +2205,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOCCAPTURE - on=%d\n", ZR_DEVNAME(zr), *on); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = setup_overlay(file, *on); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2219,12 +2220,12 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOCGWIN\n", ZR_DEVNAME(zr)); memset(vwin, 0, sizeof(struct video_window)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); vwin->x = fh->overlay_settings.x; vwin->y = fh->overlay_settings.y; vwin->width = fh->overlay_settings.width; vwin->height = fh->overlay_settings.height; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); vwin->clipcount = 0; return 0; } @@ -2241,12 +2242,12 @@ zoran_do_ioctl (struct inode *inode, ZR_DEVNAME(zr), vwin->x, vwin->y, vwin->width, vwin->height, vwin->clipcount); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = setup_window(file, vwin->x, vwin->y, vwin->width, vwin->height, vwin->clips, vwin->clipcount, NULL); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2258,9 +2259,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOCGFBUF\n", ZR_DEVNAME(zr)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); *vbuf = zr->buffer; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } break; @@ -2287,12 +2288,12 @@ zoran_do_ioctl (struct inode *inode, return -EINVAL; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = setup_fbuffer(file, vbuf->base, &zoran_formats[i], vbuf->width, vbuf->height, vbuf->bytesperline); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2305,9 +2306,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOCSYNC - frame=%d\n", ZR_DEVNAME(zr), *frame); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = v4l_sync(file, *frame); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); if (!res) zr->v4l_sync_tail++; return res; @@ -2325,9 +2326,9 @@ zoran_do_ioctl (struct inode *inode, ZR_DEVNAME(zr), vmap->frame, vmap->width, vmap->height, vmap->format); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = v4l_grab(file, vmap); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } break; @@ -2348,7 +2349,7 @@ zoran_do_ioctl (struct inode *inode, i * fh->v4l_buffers.buffer_size; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { dprintk(1, @@ -2367,7 +2368,7 @@ zoran_do_ioctl (struct inode *inode, /* The next mmap will map the V4L buffers */ fh->map_mode = ZORAN_MAP_MODE_RAW; v4l1reqbuf_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2421,7 +2422,7 @@ zoran_do_ioctl (struct inode *inode, bparams->major_version = MAJOR_VERSION; bparams->minor_version = MINOR_VERSION; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); bparams->norm = zr->norm; bparams->input = zr->input; @@ -2450,7 +2451,7 @@ zoran_do_ioctl (struct inode *inode, bparams->jpeg_markers = fh->jpg_settings.jpg_comp.jpeg_markers; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); bparams->VFIFO_FB = 0; @@ -2486,7 +2487,7 @@ zoran_do_ioctl (struct inode *inode, sizeof(bparams->COM_data)); settings.jpg_comp.jpeg_markers = bparams->jpeg_markers; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (zr->codec_mode != BUZ_MODE_IDLE) { dprintk(1, @@ -2506,7 +2507,7 @@ zoran_do_ioctl (struct inode *inode, fh->jpg_settings = settings; sparams_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2538,7 +2539,7 @@ zoran_do_ioctl (struct inode *inode, breq->size > MAX_KMALLOC_MEM) breq->size = MAX_KMALLOC_MEM; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { dprintk(1, @@ -2561,7 +2562,7 @@ zoran_do_ioctl (struct inode *inode, * also be *_PLAY, but it doesn't matter here */ fh->map_mode = ZORAN_MAP_MODE_JPG_REC; jpgreqbuf_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2574,9 +2575,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_CAPT - frame=%d\n", ZR_DEVNAME(zr), *frame); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = jpg_qbuf(file, *frame, BUZ_MODE_MOTION_COMPRESS); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2589,9 +2590,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_PLAY - frame=%d\n", ZR_DEVNAME(zr), *frame); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = jpg_qbuf(file, *frame, BUZ_MODE_MOTION_DECOMPRESS); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2604,9 +2605,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: BUZIOC_SYNC\n", ZR_DEVNAME(zr)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = jpg_sync(file, bsync); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -2630,7 +2631,7 @@ zoran_do_ioctl (struct inode *inode, input = zr->card.input[bstat->input].muxsel; norm = VIDEO_MODE_AUTO; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (zr->codec_mode != BUZ_MODE_IDLE) { dprintk(1, @@ -2655,7 +2656,7 @@ zoran_do_ioctl (struct inode *inode, decoder_command(zr, DECODER_SET_INPUT, &input); decoder_command(zr, DECODER_SET_NORM, &zr->norm); gstat_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); if (!res) { bstat->signal = @@ -2763,7 +2764,7 @@ zoran_do_ioctl (struct inode *inode, switch (fmt->type) { case V4L2_BUF_TYPE_VIDEO_OVERLAY: - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); fmt->fmt.win.w.left = fh->overlay_settings.x; fmt->fmt.win.w.top = fh->overlay_settings.y; @@ -2776,14 +2777,14 @@ zoran_do_ioctl (struct inode *inode, else fmt->fmt.win.field = V4L2_FIELD_TOP; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); break; case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fmt->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && fh->map_mode == ZORAN_MAP_MODE_RAW) { @@ -2837,7 +2838,7 @@ zoran_do_ioctl (struct inode *inode, V4L2_COLORSPACE_SMPTE170M; } - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); break; @@ -2870,7 +2871,7 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.win.w.height, fmt->fmt.win.clipcount, fmt->fmt.win.bitmap); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = setup_window(file, fmt->fmt.win.w.left, fmt->fmt.win.w.top, @@ -2880,7 +2881,7 @@ zoran_do_ioctl (struct inode *inode, fmt->fmt.win.clips, fmt->fmt.win.clipcount, fmt->fmt.win.bitmap); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; break; @@ -2917,7 +2918,7 @@ zoran_do_ioctl (struct inode *inode, } if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) { - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); settings = fh->jpg_settings; @@ -2995,7 +2996,7 @@ zoran_do_ioctl (struct inode *inode, ZORAN_MAP_MODE_JPG_REC : ZORAN_MAP_MODE_JPG_PLAY; sfmtjpg_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); } else { for (i = 0; i < zoran_num_formats; i++) if (fmt->fmt.pix.pixelformat == @@ -3010,7 +3011,7 @@ zoran_do_ioctl (struct inode *inode, (char *) &printformat); return -EINVAL; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->jpg_buffers.allocated || (fh->v4l_buffers.allocated && fh->v4l_buffers.active != @@ -3052,7 +3053,7 @@ zoran_do_ioctl (struct inode *inode, fh->map_mode = ZORAN_MAP_MODE_RAW; sfmtv4l_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); } break; @@ -3077,7 +3078,7 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_G_FBUF\n", ZR_DEVNAME(zr)); memset(fb, 0, sizeof(*fb)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); fb->base = zr->buffer.base; fb->fmt.width = zr->buffer.width; fb->fmt.height = zr->buffer.height; @@ -3086,7 +3087,7 @@ zoran_do_ioctl (struct inode *inode, fh->overlay_settings.format->fourcc; } fb->fmt.bytesperline = zr->buffer.bytesperline; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); fb->fmt.colorspace = V4L2_COLORSPACE_SRGB; fb->fmt.field = V4L2_FIELD_INTERLACED; fb->flags = V4L2_FBUF_FLAG_OVERLAY; @@ -3121,12 +3122,12 @@ zoran_do_ioctl (struct inode *inode, return -EINVAL; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = setup_fbuffer(file, fb->base, &zoran_formats[i], fb->fmt.width, fb->fmt.height, fb->fmt.bytesperline); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3139,9 +3140,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_PREVIEW - on=%d\n", ZR_DEVNAME(zr), *on); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = setup_overlay(file, *on); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3163,7 +3164,7 @@ zoran_do_ioctl (struct inode *inode, return -EINVAL; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.allocated || fh->jpg_buffers.allocated) { dprintk(1, @@ -3224,7 +3225,7 @@ zoran_do_ioctl (struct inode *inode, goto v4l2reqbuf_unlock_and_return; } v4l2reqbuf_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -3245,9 +3246,9 @@ zoran_do_ioctl (struct inode *inode, buf->type = type; buf->index = index; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); res = zoran_v4l2_buffer_status(file, buf, buf->index); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3262,7 +3263,7 @@ zoran_do_ioctl (struct inode *inode, KERN_DEBUG "%s: VIDIOC_QBUF - type=%d, index=%d\n", ZR_DEVNAME(zr), buf->type, buf->index); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); switch (fh->map_mode) { case ZORAN_MAP_MODE_RAW: @@ -3322,7 +3323,7 @@ zoran_do_ioctl (struct inode *inode, goto qbuf_unlock_and_return; } qbuf_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3336,7 +3337,7 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_DQBUF - type=%d\n", ZR_DEVNAME(zr), buf->type); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); switch (fh->map_mode) { case ZORAN_MAP_MODE_RAW: @@ -3410,7 +3411,7 @@ zoran_do_ioctl (struct inode *inode, goto dqbuf_unlock_and_return; } dqbuf_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3422,7 +3423,7 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_STREAMON\n", ZR_DEVNAME(zr)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); switch (fh->map_mode) { case ZORAN_MAP_MODE_RAW: /* raw capture */ @@ -3470,7 +3471,7 @@ zoran_do_ioctl (struct inode *inode, goto strmon_unlock_and_return; } strmon_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3482,7 +3483,7 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_STREAMOFF\n", ZR_DEVNAME(zr)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); switch (fh->map_mode) { case ZORAN_MAP_MODE_RAW: /* raw capture */ @@ -3540,7 +3541,7 @@ zoran_do_ioctl (struct inode *inode, goto strmoff_unlock_and_return; } strmoff_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3600,7 +3601,7 @@ zoran_do_ioctl (struct inode *inode, ctrl->id > V4L2_CID_HUE) return -EINVAL; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: ctrl->value = zr->brightness; @@ -3615,7 +3616,7 @@ zoran_do_ioctl (struct inode *inode, ctrl->value = zr->hue; break; } - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -3642,7 +3643,7 @@ zoran_do_ioctl (struct inode *inode, return -EINVAL; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: zr->brightness = ctrl->value; @@ -3664,7 +3665,7 @@ zoran_do_ioctl (struct inode *inode, decoder_command(zr, DECODER_SET_PICTURE, &pict); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -3732,9 +3733,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_G_STD\n", ZR_DEVNAME(zr)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); norm = zr->norm; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); switch (norm) { case VIDEO_MODE_PAL: @@ -3776,13 +3777,13 @@ zoran_do_ioctl (struct inode *inode, return -EINVAL; } - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if ((res = zoran_set_norm(zr, norm))) goto sstd_unlock_and_return; res = wait_grab_pending(zr); sstd_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } break; @@ -3809,9 +3810,9 @@ zoran_do_ioctl (struct inode *inode, inp->std = V4L2_STD_ALL; /* Get status of video decoder */ - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); decoder_command(zr, DECODER_GET_STATUS, &status); - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); if (!(status & DECODER_STATUS_GOOD)) { inp->status |= V4L2_IN_ST_NO_POWER; @@ -3830,9 +3831,9 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_G_INPUT\n", ZR_DEVNAME(zr)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); *input = zr->input; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -3845,14 +3846,14 @@ zoran_do_ioctl (struct inode *inode, dprintk(3, KERN_DEBUG "%s: VIDIOC_S_INPUT - input=%d\n", ZR_DEVNAME(zr), *input); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if ((res = zoran_set_input(zr, *input))) goto sinput_unlock_and_return; /* Make sure the changes come into effect */ res = wait_grab_pending(zr); sinput_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } break; @@ -3914,7 +3915,7 @@ zoran_do_ioctl (struct inode *inode, memset(cropcap, 0, sizeof(*cropcap)); cropcap->type = type; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (cropcap->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && (cropcap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || @@ -3934,7 +3935,7 @@ zoran_do_ioctl (struct inode *inode, cropcap->defrect.width = BUZ_MIN_WIDTH; cropcap->defrect.height = BUZ_MIN_HEIGHT; cropcap_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } break; @@ -3950,7 +3951,7 @@ zoran_do_ioctl (struct inode *inode, memset(crop, 0, sizeof(*crop)); crop->type = type; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT && (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || @@ -3969,7 +3970,7 @@ zoran_do_ioctl (struct inode *inode, crop->c.height = fh->jpg_settings.img_height; gcrop_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -3988,7 +3989,7 @@ zoran_do_ioctl (struct inode *inode, ZR_DEVNAME(zr), crop->type, crop->c.left, crop->c.top, crop->c.width, crop->c.height); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->jpg_buffers.allocated || fh->v4l_buffers.allocated) { dprintk(1, @@ -4024,7 +4025,7 @@ zoran_do_ioctl (struct inode *inode, fh->jpg_settings = settings; scrop_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } break; @@ -4038,7 +4039,7 @@ zoran_do_ioctl (struct inode *inode, memset(params, 0, sizeof(*params)); - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); params->quality = fh->jpg_settings.jpg_comp.quality; params->APPn = fh->jpg_settings.jpg_comp.APPn; @@ -4053,7 +4054,7 @@ zoran_do_ioctl (struct inode *inode, params->jpeg_markers = fh->jpg_settings.jpg_comp.jpeg_markers; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -4074,7 +4075,7 @@ zoran_do_ioctl (struct inode *inode, settings.jpg_comp = *params; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.active != ZORAN_FREE || fh->jpg_buffers.active != ZORAN_FREE) { @@ -4093,7 +4094,7 @@ zoran_do_ioctl (struct inode *inode, zoran_v4l2_calc_bufsize(&fh->jpg_settings); fh->jpg_settings.jpg_comp = *params = settings.jpg_comp; sjpegc_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return 0; } @@ -4127,7 +4128,7 @@ zoran_do_ioctl (struct inode *inode, switch (fmt->type) { case V4L2_BUF_TYPE_VIDEO_OVERLAY: - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fmt->fmt.win.w.width > BUZ_MAX_WIDTH) fmt->fmt.win.w.width = BUZ_MAX_WIDTH; @@ -4138,7 +4139,7 @@ zoran_do_ioctl (struct inode *inode, if (fmt->fmt.win.w.height < BUZ_MIN_HEIGHT) fmt->fmt.win.w.height = BUZ_MIN_HEIGHT; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); break; case V4L2_BUF_TYPE_VIDEO_CAPTURE: @@ -4146,7 +4147,7 @@ zoran_do_ioctl (struct inode *inode, if (fmt->fmt.pix.bytesperline > 0) return -EINVAL; - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG) { settings = fh->jpg_settings; @@ -4229,7 +4230,7 @@ zoran_do_ioctl (struct inode *inode, goto tryfmt_unlock_and_return; } tryfmt_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; break; @@ -4280,7 +4281,7 @@ zoran_poll (struct file *file, * if no buffers queued or so, return POLLNVAL */ - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); switch (fh->map_mode) { case ZORAN_MAP_MODE_RAW: @@ -4329,7 +4330,7 @@ zoran_poll (struct file *file, } poll_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); return res; } @@ -4385,7 +4386,7 @@ zoran_vm_close (struct vm_area_struct *vma) if (fh->jpg_buffers.buffer[i].map) break; if (i == fh->jpg_buffers.num_buffers) { - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->jpg_buffers.active != ZORAN_FREE) { jpg_qbuf(file, -1, zr->codec_mode); @@ -4398,7 +4399,7 @@ zoran_vm_close (struct vm_area_struct *vma) fh->jpg_buffers.allocated = 0; fh->jpg_buffers.ready_to_be_freed = 1; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); } break; @@ -4421,7 +4422,7 @@ zoran_vm_close (struct vm_area_struct *vma) if (fh->v4l_buffers.buffer[i].map) break; if (i == fh->v4l_buffers.num_buffers) { - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.active != ZORAN_FREE) { zr36057_set_memgrab(zr, 0); @@ -4434,7 +4435,7 @@ zoran_vm_close (struct vm_area_struct *vma) fh->v4l_buffers.allocated = 0; fh->v4l_buffers.ready_to_be_freed = 1; - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); } break; @@ -4489,7 +4490,7 @@ zoran_mmap (struct file *file, case ZORAN_MAP_MODE_JPG_PLAY: /* lock */ - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); /* Map the MJPEG buffers */ if (!fh->jpg_buffers.allocated) { @@ -4579,13 +4580,13 @@ zoran_mmap (struct file *file, } jpg_mmap_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); break; case ZORAN_MAP_MODE_RAW: - down(&zr->resource_lock); + mutex_lock(&zr->resource_lock); /* Map the V4L buffers */ if (!fh->v4l_buffers.allocated) { @@ -4657,7 +4658,7 @@ zoran_mmap (struct file *file, break; } v4l_mmap_unlock_and_return: - up(&zr->resource_lock); + mutex_unlock(&zr->resource_lock); break; diff --git a/drivers/media/video/zoran_procfs.c b/drivers/media/video/zoran_procfs.c index f0d9b13c3c6c..a00fae90229a 100644 --- a/drivers/media/video/zoran_procfs.c +++ b/drivers/media/video/zoran_procfs.c @@ -4,7 +4,7 @@ * Media Labs LML33/LML33R10. * * This part handles the procFS entries (/proc/ZORAN[%d]) - * + * * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> * * Currently maintained by: diff --git a/drivers/media/video/zoran_procfs.h b/drivers/media/video/zoran_procfs.h index 8904fc959555..f2d5b1ba448f 100644 --- a/drivers/media/video/zoran_procfs.h +++ b/drivers/media/video/zoran_procfs.h @@ -4,7 +4,7 @@ * Media Labs LML33/LML33R10. * * This part handles card-specific data and detection - * + * * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> * * Currently maintained by: diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zr36016.c index 10130ef67ea7..62f77584fb85 100644 --- a/drivers/media/video/zr36016.c +++ b/drivers/media/video/zr36016.c @@ -34,7 +34,7 @@ #include <linux/types.h> #include <linux/wait.h> -/* includes for structures and defines regarding video +/* includes for structures and defines regarding video #include<linux/videodev.h> */ /* I/O commands, error codes */ @@ -143,8 +143,8 @@ zr36016_readi (struct zr36016 *ptr, static void zr36016_writei (struct zr36016 *ptr, - u16 reg, - u8 value) + u16 reg, + u8 value) { dprintk(4, "%s: writing indirect 0x%02x to 0x%04x\n", ptr->name, value, reg); @@ -192,7 +192,7 @@ zr36016_basic_test (struct zr36016 *ptr) dprintk(1, "\n"); } // for testing just write 0, then the default value to a register and read - // it back in both cases + // it back in both cases zr36016_writei(ptr, ZR016I_PAX_LO, 0x00); if (zr36016_readi(ptr, ZR016I_PAX_LO) != 0x0) { dprintk(1, @@ -232,17 +232,17 @@ zr36016_basic_test (struct zr36016 *ptr) static int zr36016_pushit (struct zr36016 *ptr, u16 startreg, u16 len, - const char *data) + const char *data) { - int i=0; + int i=0; - dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", + dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, startreg,len); - while (i<len) { - zr36016_writei(ptr, startreg++, data[i++]); - } + while (i<len) { + zr36016_writei(ptr, startreg++, data[i++]); + } - return i; + return i; } #endif diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c index 6699725be605..a6bbd125631c 100644 --- a/drivers/media/video/zr36050.c +++ b/drivers/media/video/zr36050.c @@ -34,7 +34,7 @@ #include <linux/types.h> #include <linux/wait.h> -/* includes for structures and defines regarding video +/* includes for structures and defines regarding video #include<linux/videodev.h> */ /* I/O commands, error codes */ @@ -171,7 +171,7 @@ zr36050_wait_end (struct zr36050 *ptr) /* ========================================================================= Local helper function: - basic test of "connectivity", writes/reads to/from memory the SOF marker + basic test of "connectivity", writes/reads to/from memory the SOF marker ========================================================================= */ static int @@ -218,9 +218,9 @@ zr36050_basic_test (struct zr36050 *ptr) static int zr36050_pushit (struct zr36050 *ptr, - u16 startreg, - u16 len, - const char *data) + u16 startreg, + u16 len, + const char *data) { int i = 0; @@ -345,7 +345,7 @@ static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; /* ------------------------------------------------------------------------- */ /* SOF (start of frame) segment depends on width, height and sampling ratio - of each color component */ + of each color component */ static int zr36050_set_sof (struct zr36050 *ptr) @@ -376,8 +376,8 @@ zr36050_set_sof (struct zr36050 *ptr) /* ------------------------------------------------------------------------- */ -/* SOS (start of scan) segment depends on the used scan components - of each color component */ +/* SOS (start of scan) segment depends on the used scan components + of each color component */ static int zr36050_set_sos (struct zr36050 *ptr) diff --git a/drivers/media/video/zr36057.h b/drivers/media/video/zr36057.h index 159abfa034d9..54c9362aa980 100644 --- a/drivers/media/video/zr36057.h +++ b/drivers/media/video/zr36057.h @@ -1,4 +1,4 @@ -/* +/* * zr36057.h - zr36057 register offsets * * Copyright (C) 1998 Dave Perks <dperks@ibm.net> @@ -27,14 +27,14 @@ #define ZR36057_VFEHCR 0x000 /* Video Front End, Horizontal Configuration Register */ #define ZR36057_VFEHCR_HSPol (1<<30) #define ZR36057_VFEHCR_HStart 10 -#define ZR36057_VFEHCR_HEnd 0 -#define ZR36057_VFEHCR_Hmask 0x3ff +#define ZR36057_VFEHCR_HEnd 0 +#define ZR36057_VFEHCR_Hmask 0x3ff #define ZR36057_VFEVCR 0x004 /* Video Front End, Vertical Configuration Register */ #define ZR36057_VFEVCR_VSPol (1<<30) #define ZR36057_VFEVCR_VStart 10 -#define ZR36057_VFEVCR_VEnd 0 -#define ZR36057_VFEVCR_Vmask 0x3ff +#define ZR36057_VFEVCR_VEnd 0 +#define ZR36057_VFEVCR_Vmask 0x3ff #define ZR36057_VFESPFR 0x008 /* Video Front End, Scaler and Pixel Format Register */ #define ZR36057_VFESPFR_ExtFl (1<<26) diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c index d8dd003a7aad..97c8f9b9dc12 100644 --- a/drivers/media/video/zr36060.c +++ b/drivers/media/video/zr36060.c @@ -34,7 +34,7 @@ #include <linux/types.h> #include <linux/wait.h> -/* includes for structures and defines regarding video +/* includes for structures and defines regarding video #include<linux/videodev.h> */ /* I/O commands, error codes */ @@ -173,7 +173,7 @@ zr36060_wait_end (struct zr36060 *ptr) /* ========================================================================= Local helper function: - basic test of "connectivity", writes/reads to/from memory the SOF marker + basic test of "connectivity", writes/reads to/from memory the SOF marker ========================================================================= */ static int @@ -208,9 +208,9 @@ zr36060_basic_test (struct zr36060 *ptr) static int zr36060_pushit (struct zr36060 *ptr, - u16 startreg, - u16 len, - const char *data) + u16 startreg, + u16 len, + const char *data) { int i = 0; @@ -335,7 +335,7 @@ static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; /* ------------------------------------------------------------------------- */ /* SOF (start of frame) segment depends on width, height and sampling ratio - of each color component */ + of each color component */ static int zr36060_set_sof (struct zr36060 *ptr) @@ -367,8 +367,8 @@ zr36060_set_sof (struct zr36060 *ptr) /* ------------------------------------------------------------------------- */ -/* SOS (start of scan) segment depends on the used scan components - of each color component */ +/* SOS (start of scan) segment depends on the used scan components + of each color component */ static int zr36060_set_sos (struct zr36060 *ptr) @@ -385,7 +385,7 @@ zr36060_set_sos (struct zr36060 *ptr) for (i = 0; i < NO_OF_COMPONENTS; i++) { sos_data[5 + (i * 2)] = i; // index sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) | - zr36060_ta[i]; // AC/DC tbl.sel. + zr36060_ta[i]; // AC/DC tbl.sel. } sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f; @@ -999,7 +999,7 @@ zr36060_cleanup_module (void) dprintk(1, "zr36060: something's wrong - %d codecs left somehow.\n", zr36060_codecs); - } + } /* however, we can't just stay alive */ videocodec_unregister(&zr36060_codec); diff --git a/drivers/media/video/zr36120.c b/drivers/media/video/zr36120.c index d4c633b8a7f5..6ac3b6740089 100644 --- a/drivers/media/video/zr36120.c +++ b/drivers/media/video/zr36120.c @@ -70,10 +70,10 @@ MODULE_AUTHOR("Pauline Middelink <middelin@polyware.nl>"); MODULE_DESCRIPTION("Zoran ZR36120 based framegrabber"); MODULE_LICENSE("GPL"); -MODULE_PARM(triton1,"i"); -MODULE_PARM(cardtype,"1-" __MODULE_STRING(ZORAN_MAX) "i"); -MODULE_PARM(video_nr,"i"); -MODULE_PARM(vbi_nr,"i"); +module_param(triton1, uint, 0); +module_param_array(cardtype, uint, NULL, 0); +module_param(video_nr, int, 0); +module_param(vbi_nr, int, 0); static int zoran_cards; static struct zoran zorans[ZORAN_MAX]; @@ -316,7 +316,7 @@ DEBUG(printk(CARD_DEBUG "%p added to queue\n",CARD,item)); item->status = FBUFFER_BUSY; if (!lastitem) ztv->workqueue = item; - else + else lastitem->next = item; lastitem = item; } @@ -516,7 +516,7 @@ DEBUG(printk(KERN_DEBUG " %d: clip(%d,%d,%d,%d)\n", i,vp->x,vp->y,vp->widt zraor((ztv->vidInterlace*ystep)<<0,~ZORAN_OCR_MASKSTRIDE,ZORAN_OCR); } -struct tvnorm +struct tvnorm { u16 Wt, Wa, Ht, Ha, HStart, VStart; }; @@ -660,7 +660,7 @@ DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Hstart, Hend)); int HorDcm = 64-X; int hcrop1 = 2*(Wa-We)/4; /* - * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi> + * BUGFIX: Juha Nurmela <junki@qn-lpr2-165.quicknet.inet.fi> * found the solution to the color phase shift. * See ChangeLog for the full explanation) */ @@ -812,12 +812,12 @@ void zoran_close(struct video_device* dev) zoran_common_close(ztv); - /* - * This is sucky but right now I can't find a good way to - * be sure its safe to free the buffer. We wait 5-6 fields - * which is more than sufficient to be sure. - */ - msleep(100); /* Wait 1/10th of a second */ + /* + * This is sucky but right now I can't find a good way to + * be sure its safe to free the buffer. We wait 5-6 fields + * which is more than sufficient to be sure. + */ + msleep(100); /* Wait 1/10th of a second */ /* free the allocated framebuffer */ bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE); @@ -1436,7 +1436,7 @@ int zoran_ioctl(struct video_device* dev, unsigned int cmd, void *arg) /* Why isn't this in the API? * And why doesn't it take a buffer number? - case BTTV_FIELDNR: + case BTTV_FIELDNR: { unsigned long v = ztv->lastfieldnr; if (copy_to_user(arg,&v,sizeof(v))) @@ -1557,12 +1557,12 @@ void vbi_close(struct video_device *dev) zoran_common_close(ztv); - /* - * This is sucky but right now I can't find a good way to - * be sure its safe to free the buffer. We wait 5-6 fields - * which is more than sufficient to be sure. - */ - msleep(100); /* Wait 1/10th of a second */ + /* + * This is sucky but right now I can't find a good way to + * be sure its safe to free the buffer. We wait 5-6 fields + * which is more than sufficient to be sure. + */ + msleep(100); /* Wait 1/10th of a second */ for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) { @@ -1620,7 +1620,7 @@ long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonb write_unlock_irq(&ztv->lock); return -EWOULDBLOCK; } - + /* mark the unused buffer as wanted */ unused->status = FBUFFER_BUSY; unused->next = 0; @@ -1671,7 +1671,7 @@ long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonb if (count == 2*19*2048) { /* * Extreme HACK, old VBI programs expect 2048 points - * of data, and we only got 864 orso. Double each + * of data, and we only got 864 orso. Double each * datapoint and clear the rest of the line. * This way we have appear to have a * sample_frequency of 29.5 Mc. @@ -1956,7 +1956,7 @@ int __init init_zoran(int card) zrand(~ZORAN_VDC_TRICOM, ZORAN_VDC); /* external FL determines TOP frame */ - zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC); + zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC); /* set HSpol */ if (ztv->card->hsync_pos) @@ -2012,7 +2012,7 @@ void release_zoran(int max) struct zoran *ztv; int i; - for (i=0;i<max; i++) + for (i=0;i<max; i++) { ztv = &zorans[i]; @@ -2029,7 +2029,7 @@ void release_zoran(int max) /* free it */ free_irq(ztv->dev->irq,ztv); - + /* unregister i2c_bus */ i2c_unregister_bus((&ztv->i2c)); @@ -2050,7 +2050,7 @@ void __exit zr36120_exit(void) int __init zr36120_init(void) { int card; - + handle_chipset(); zoran_cards = find_zoran(); if (zoran_cards<0) @@ -2063,7 +2063,7 @@ int __init zr36120_init(void) /* only release the zorans we have registered */ release_zoran(card); return -EIO; - } + } } return 0; } diff --git a/drivers/media/video/zr36120.h b/drivers/media/video/zr36120.h index 571f8e84b58a..a71e485b0f98 100644 --- a/drivers/media/video/zr36120.h +++ b/drivers/media/video/zr36120.h @@ -1,4 +1,4 @@ -/* +/* zr36120.h - Zoran 36120/36125 based framegrabbers Copyright (C) 1998-1999 Pauline Middelink (middelin@polyware.nl) @@ -89,7 +89,7 @@ struct vidinfo { ulong* overlay; /* kernel addr of overlay mask */ }; -struct zoran +struct zoran { struct video_device video_dev; #define CARD_DEBUG KERN_DEBUG "%s(%lu): " @@ -106,7 +106,7 @@ struct zoran uint norm; /* 0=PAL, 1=NTSC, 2=SECAM */ uint tuner_freq; /* Current freq in kHz */ struct video_picture picture; /* Current picture params */ - + /* videocard details */ uint swidth; /* screen width */ uint sheight; /* screen height */ |