diff options
Diffstat (limited to 'drivers/message/fusion/lsi/mpi_log_sas.h')
| -rw-r--r-- | drivers/message/fusion/lsi/mpi_log_sas.h | 105 |
1 files changed, 61 insertions, 44 deletions
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h index 9259d1ad6e6e..a9c14ad132ce 100644 --- a/drivers/message/fusion/lsi/mpi_log_sas.h +++ b/drivers/message/fusion/lsi/mpi_log_sas.h @@ -3,38 +3,11 @@ * * * Copyright 2003 LSI Logic Corporation. All rights reserved. * * * - * This file is confidential and a trade secret of LSI Logic. The * - * receipt of or possession of this file does not convey any rights to * - * reproduce or disclose its contents or to manufacture, use, or sell * - * anything it may describe, in whole, or in part, without the specific * - * written consent of LSI Logic Corporation. * + * Description * + * ------------ * + * This include file contains SAS firmware interface IOC Log Info codes * * * - *************************************************************************** - * - * Name: iopiIocLogInfo.h - * Title: SAS Firmware IOP Interface IOC Log Info Definitions - * Programmer: Guy Kendall - * Creation Date: September 24, 2003 - * - * Version History - * --------------- - * - * Last Updated - * ------------- - * Version %version: 22 % - * Date Updated %date_modified: % - * Programmer %created_by: nperucca % - * - * Date Who Description - * -------- --- ------------------------------------------------------- - * 09/24/03 GWK Initial version - * - * - * Description - * ------------ - * This include file contains SAS firmware interface IOC Log Info codes - * - *------------------------------------------------------------------------- + *-------------------------------------------------------------------------* */ #ifndef IOPI_IOCLOGINFO_H_INCLUDED @@ -57,6 +30,8 @@ #define IOC_LOGINFO_ORIGINATOR_PL (0x01000000) #define IOC_LOGINFO_ORIGINATOR_IR (0x02000000) +#define IOC_LOGINFO_ORIGINATOR_MASK (0x0F000000) + /****************************************************************************/ /* LOGINFO_CODE defines */ /****************************************************************************/ @@ -78,11 +53,27 @@ #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT (0x00030700) /* Default Page not found */ #define IOP_LOGINFO_CODE_TASK_TERMINATED (0x00050000) +#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R (0x00060001) /* Read Action not supported for SEP msg */ +#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */ + +#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED (0x00070001) +#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED (0x00070002) +#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO (0x00070003) +#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004) +#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005) /****************************************************************************/ /* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */ /****************************************************************************/ #define PL_LOGINFO_CODE_OPEN_FAILURE (0x00010000) +#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT (0x00010001) +#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION (0x00010011) +#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013) +#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY (0x00010018) +#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION (0x00010019) +#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT (0X0001001A) +#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0001001B) +#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED (0x0001001C) #define PL_LOGINFO_CODE_INVALID_SGL (0x00020000) #define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00030000) #define PL_LOGINFO_CODE_FRAME_XFER_ERROR (0x00040000) @@ -97,6 +88,7 @@ #define PL_LOGINFO_CODE_SATA_LINK_DOWN (0x000D0000) #define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS (0x000E0000) #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE (0x000F0000) +#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED (0x000F0001) /* PL not yet initialized, can't do config page req. */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT (0x000F0100) /* Invalid Page Type */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS (0x000F0200) /* Invalid Number of Phys */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP (0x000F0300) /* Case Not Handled */ @@ -105,11 +97,23 @@ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY (0x000F0600) /* Invalid Phy */ #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER (0x000F0700) /* No Owner Found */ #define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00100000) -#define PL_LOGINFO_CODE_RESET (0x00110000) -#define PL_LOGINFO_CODE_ABORT (0x00120000) +#define PL_LOGINFO_CODE_RESET (0x00110000) /* See Sub-Codes below */ +#define PL_LOGINFO_CODE_ABORT (0x00120000) /* See Sub-Codes below */ #define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED (0x00130000) #define PL_LOGINFO_CODE_IO_EXECUTED (0x00140000) +#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER (0x00150000) +#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT (0x00160000) #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE (0x00000100) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT (0x00000101) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT (0x0000011A) /* Open Reject (Retry) Timeout */ +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED (0x0000011B) +#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED (0x0000011C) /* Arbitration Wait Timer Maxed */ + +#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET (0x00000120) +#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER (0x00000130) /* Leave lower nibble (1-f) reserved. */ +#define PL_LOGINFO_SUB_CODE_PORT_LAYER (0x00000140) /* Leave lower nibble (1-f) reserved. */ + + #define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200) #define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300) #define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) @@ -123,26 +127,39 @@ #define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR (0x00000C00) #define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN (0x00000D00) #define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS (0x00000E00) +#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01) +#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00) #define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000) #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200001) /* Error occured on SMP Read */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200002) /* Error occured on SMP Write */ -#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200004) /* Encl Mgmt services not available for this WWID */ -#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200005) /* Address Mode not suppored */ -#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200006) /* Invalid Slot Number in SEP Msg */ -#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200007) /* SGPIO not present/enabled */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR (0x00200020) /* Error occured on SMP Write */ +#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL (0x00200040) /* Encl Mgmt services not available for this WWID */ +#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED (0x00200050) /* Address Mode not suppored */ +#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM (0x00200060) /* Invalid Slot Number in SEP Msg */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT (0x00200070) /* SGPIO not present/enabled */ +#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED (0x00200080) /* GPIO not configured */ +#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR (0x00200090) /* GPIO can't allocate a frame */ +#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR (0x002000A0) /* GPIO failed config page request */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR (0x002000B0) /* Can't get frame for SES command */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR (0x002000C0) /* I/O execution error */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED (0x002000D0) /* SEP I/O retries exhausted */ +#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR (0x002000E0) /* Can't get frame for SMP command */ #define PL_LOGINFO_DA_SEP_NOT_PRESENT (0x00200100) /* SEP not present when msg received */ #define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR (0x00200101) /* Can only accept 1 msg at a time */ #define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE (0x00200102) /* ISTWI interrupt recvd. while IDLE */ #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE (0x00200103) /* SEP NACK'd, it is busy */ -#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200104) /* SEP stopped or sent bad chksum in Hdr */ -#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200105) /* SEP returned unknown scsi status */ -#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200106) /* SEP returned unknown scsi status */ -#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x00200107) /* SEP returned bad chksum after STOP */ -#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/ +#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */ +#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM (0x00200105) /* SEP stopped or sent bad chksum in Hdr */ +#define PL_LOGINFO_DA_SEP_STOP_ON_DATA (0x00200106) /* SEP stopped while transfering data */ +#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA (0x00200107) /* SEP stopped while transfering sense data */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1 (0x00200108) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2 (0x00200109) /* SEP returned unknown scsi status */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP (0x0020010A) /* SEP returned bad chksum after STOP */ +#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/ +#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND (0x0020010C) /* SEP doesn't support CDB opcode */ /****************************************************************************/ |