diff options
Diffstat (limited to 'drivers/mfd/axp20x.c')
| -rw-r--r-- | drivers/mfd/axp20x.c | 78 |
1 files changed, 67 insertions, 11 deletions
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index ed918de84238..25115fe2acdf 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -31,6 +31,8 @@ #define AXP20X_OFF 0x80 +#define AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE BIT(4) + static const char * const axp20x_model_names[] = { "AXP152", "AXP202", @@ -118,7 +120,14 @@ static const struct regmap_range axp288_writeable_ranges[] = { }; static const struct regmap_range axp288_volatile_ranges[] = { + regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP288_POWER_REASON), + regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL), + regmap_reg_range(AXP288_BC_DET_STAT, AXP288_BC_DET_STAT), regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L), + regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL), + regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE), + regmap_reg_range(AXP288_RT_BATT_V_H, AXP288_RT_BATT_V_L), + regmap_reg_range(AXP20X_FG_RES, AXP288_FG_CC_CAP_REG), }; static const struct regmap_access_table axp288_writeable_table = { @@ -207,14 +216,14 @@ static struct resource axp22x_pek_resources[] = { static struct resource axp288_power_button_resources[] = { { .name = "PEK_DBR", - .start = AXP288_IRQ_POKN, - .end = AXP288_IRQ_POKN, + .start = AXP288_IRQ_POKP, + .end = AXP288_IRQ_POKP, .flags = IORESOURCE_IRQ, }, { .name = "PEK_DBF", - .start = AXP288_IRQ_POKP, - .end = AXP288_IRQ_POKP, + .start = AXP288_IRQ_POKN, + .end = AXP288_IRQ_POKN, .flags = IORESOURCE_IRQ, }, }; @@ -407,6 +416,9 @@ static const struct regmap_irq axp288_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3), INIT_REGMAP_IRQ(AXP288, OV, 0, 4), + INIT_REGMAP_IRQ(AXP288, FALLING_ALT, 0, 5), + INIT_REGMAP_IRQ(AXP288, RISING_ALT, 0, 6), + INIT_REGMAP_IRQ(AXP288, OV_ALT, 0, 7), INIT_REGMAP_IRQ(AXP288, DONE, 1, 2), INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3), @@ -589,7 +601,22 @@ static struct mfd_cell axp20x_cells[] = { }, }; -static struct mfd_cell axp22x_cells[] = { +static struct mfd_cell axp221_cells[] = { + { + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp22x_pek_resources), + .resources = axp22x_pek_resources, + }, { + .name = "axp20x-regulator", + }, { + .name = "axp20x-usb-power-supply", + .of_compatible = "x-powers,axp221-usb-power-supply", + .num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources), + .resources = axp22x_usb_power_supply_resources, + }, +}; + +static struct mfd_cell axp223_cells[] = { { .name = "axp20x-pek", .num_resources = ARRAY_SIZE(axp22x_pek_resources), @@ -598,7 +625,7 @@ static struct mfd_cell axp22x_cells[] = { .name = "axp20x-regulator", }, { .name = "axp20x-usb-power-supply", - .of_compatible = "x-powers,axp221-usb-power-supply", + .of_compatible = "x-powers,axp223-usb-power-supply", .num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources), .resources = axp22x_usb_power_supply_resources, }, @@ -791,9 +818,14 @@ int axp20x_match_device(struct axp20x_dev *axp20x) axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; break; case AXP221_ID: + axp20x->nr_cells = ARRAY_SIZE(axp221_cells); + axp20x->cells = axp221_cells; + axp20x->regmap_cfg = &axp22x_regmap_config; + axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; + break; case AXP223_ID: - axp20x->nr_cells = ARRAY_SIZE(axp22x_cells); - axp20x->cells = axp22x_cells; + axp20x->nr_cells = ARRAY_SIZE(axp223_cells); + axp20x->cells = axp223_cells; axp20x->regmap_cfg = &axp22x_regmap_config; axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; break; @@ -802,6 +834,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x) axp20x->nr_cells = ARRAY_SIZE(axp288_cells); axp20x->regmap_cfg = &axp288_regmap_config; axp20x->regmap_irq_chip = &axp288_regmap_irq_chip; + axp20x->irq_flags = IRQF_TRIGGER_LOW; break; case AXP806_ID: axp20x->nr_cells = ARRAY_SIZE(axp806_cells); @@ -830,10 +863,33 @@ int axp20x_device_probe(struct axp20x_dev *axp20x) { int ret; + /* + * The AXP806 supports either master/standalone or slave mode. + * Slave mode allows sharing the serial bus, even with multiple + * AXP806 which all have the same hardware address. + * + * This is done with extra "serial interface address extension", + * or AXP806_BUS_ADDR_EXT, and "register address extension", or + * AXP806_REG_ADDR_EXT, registers. The former is read-only, with + * 1 bit customizable at the factory, and 1 bit depending on the + * state of an external pin. The latter is writable. The device + * will only respond to operations to its other registers when + * the these device addressing bits (in the upper 4 bits of the + * registers) match. + * + * Since we only support an AXP806 chained to an AXP809 in slave + * mode, and there isn't any existing hardware which uses AXP806 + * in master mode, or has 2 AXP806s in the same system, we can + * just program the register address extension to the slave mode + * address. + */ + if (axp20x->variant == AXP806_ID) + regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT, + AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE); + ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq, - IRQF_ONESHOT | IRQF_SHARED, -1, - axp20x->regmap_irq_chip, - &axp20x->regmap_irqc); + IRQF_ONESHOT | IRQF_SHARED | axp20x->irq_flags, + -1, axp20x->regmap_irq_chip, &axp20x->regmap_irqc); if (ret) { dev_err(axp20x->dev, "failed to add irq chip: %d\n", ret); return ret; |