diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/db8500-prcmu.c | 63 |
1 files changed, 43 insertions, 20 deletions
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 3972f910dd23..57ac58b4b5f3 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -27,6 +27,7 @@ #include <linux/bitops.h> #include <linux/fs.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/platform_device.h> #include <linux/uaccess.h> @@ -668,6 +669,14 @@ struct prcmu_fw_version *prcmu_get_fw_version(void) return fw_info.valid ? &fw_info.version : NULL; } +static bool prcmu_is_ulppll_disabled(void) +{ + struct prcmu_fw_version *ver; + + ver = prcmu_get_fw_version(); + return ver && ver->project == PRCMU_FW_PROJECT_U8420_SYSCLK; +} + bool prcmu_has_arm_maxopp(void) { return (readb(tcdm_base + PRCM_AVS_VARM_MAX_OPP) & @@ -1308,10 +1317,23 @@ static int request_sysclk(bool enable) static int request_timclk(bool enable) { - u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK); + u32 val; + + /* + * On the U8420_CLKSEL firmware, the ULP (Ultra Low Power) + * PLL is disabled so we cannot use doze mode, this will + * stop the clock on this firmware. + */ + if (prcmu_is_ulppll_disabled()) + val = 0; + else + val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK); if (!enable) - val |= PRCM_TCR_STOP_TIMERS; + val |= PRCM_TCR_STOP_TIMERS | + PRCM_TCR_DOZE_MODE | + PRCM_TCR_TENSEL_MASK; + writel(val, PRCM_TCR); return 0; @@ -1615,7 +1637,8 @@ unsigned long prcmu_clock_rate(u8 clock) if (clock < PRCMU_NUM_REG_CLOCKS) return clock_rate(clock); else if (clock == PRCMU_TIMCLK) - return ROOT_CLOCK_RATE / 16; + return prcmu_is_ulppll_disabled() ? + 32768 : ROOT_CLOCK_RATE / 16; else if (clock == PRCMU_SYSCLK) return ROOT_CLOCK_RATE; else if (clock == PRCMU_PLLSOC0) @@ -2646,6 +2669,8 @@ static char *fw_project_name(u32 project) return "U8520 MBL"; case PRCMU_FW_PROJECT_U8420: return "U8420"; + case PRCMU_FW_PROJECT_U8420_SYSCLK: + return "U8420-sysclk"; case PRCMU_FW_PROJECT_U9540: return "U9540"; case PRCMU_FW_PROJECT_A9420: @@ -2693,27 +2718,18 @@ static int db8500_irq_init(struct device_node *np) return 0; } -static void dbx500_fw_version_init(struct platform_device *pdev, - u32 version_offset) +static void dbx500_fw_version_init(struct device_node *np) { - struct resource *res; void __iomem *tcpm_base; u32 version; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "prcmu-tcpm"); - if (!res) { - dev_err(&pdev->dev, - "Error: no prcmu tcpm memory region provided\n"); - return; - } - tcpm_base = ioremap(res->start, resource_size(res)); + tcpm_base = of_iomap(np, 1); if (!tcpm_base) { - dev_err(&pdev->dev, "no prcmu tcpm mem region provided\n"); + pr_err("no prcmu tcpm mem region provided\n"); return; } - version = readl(tcpm_base + version_offset); + version = readl(tcpm_base + DB8500_PRCMU_FW_VERSION_OFFSET); fw_info.version.project = (version & 0xFF); fw_info.version.api_version = (version >> 8) & 0xFF; fw_info.version.func_version = (version >> 16) & 0xFF; @@ -2731,7 +2747,7 @@ static void dbx500_fw_version_init(struct platform_device *pdev, iounmap(tcpm_base); } -void __init db8500_prcmu_early_init(u32 phy_base, u32 size) +void __init db8500_prcmu_early_init(void) { /* * This is a temporary remap to bring up the clocks. It is @@ -2740,9 +2756,17 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size) * clock driver can probe independently. An early initcall will * still be needed, but it can be diverted into drivers/clk/ux500. */ - prcmu_base = ioremap(phy_base, size); - if (!prcmu_base) + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); + prcmu_base = of_iomap(np, 0); + if (!prcmu_base) { + of_node_put(np); pr_err("%s: ioremap() of prcmu registers failed!\n", __func__); + return; + } + dbx500_fw_version_init(np); + of_node_put(np); spin_lock_init(&mb0_transfer.lock); spin_lock_init(&mb0_transfer.dbb_irqs_lock); @@ -3084,7 +3108,6 @@ static int db8500_prcmu_probe(struct platform_device *pdev) return -ENOMEM; } init_prcm_registers(); - dbx500_fw_version_init(pdev, DB8500_PRCMU_FW_VERSION_OFFSET); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm"); if (!res) { dev_err(&pdev->dev, "no prcmu tcdm region provided\n"); |