diff options
Diffstat (limited to 'drivers/mfd')
-rw-r--r-- | drivers/mfd/Kconfig | 29 | ||||
-rw-r--r-- | drivers/mfd/Makefile | 3 | ||||
-rw-r--r-- | drivers/mfd/max77620.c | 87 | ||||
-rw-r--r-- | drivers/mfd/max77650.c | 232 | ||||
-rw-r--r-- | drivers/mfd/mfd-core.c | 13 | ||||
-rw-r--r-- | drivers/mfd/sprd-sc27xx-spi.c | 42 | ||||
-rw-r--r-- | drivers/mfd/stmfx.c | 545 | ||||
-rw-r--r-- | drivers/mfd/ti-lmu.c | 11 | ||||
-rw-r--r-- | drivers/mfd/twl-core.c | 23 |
9 files changed, 950 insertions, 35 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index f1a184f87c22..9d53480352a6 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -743,6 +743,20 @@ config MFD_MAX77620 provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77650 + tristate "Maxim MAX77650/77651 PMIC Support" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Say Y here to add support for Maxim Semiconductor MAX77650 and + MAX77651 Power Management ICs. This is the core multifunction + driver for interacting with the device. The module name is + 'max77650'. Additional drivers can be enabled in order to use + the following functionalities of the device: GPIO, regulator, + charger, LED, onkey. + config MFD_MAX77686 tristate "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C @@ -1256,7 +1270,7 @@ config MFD_STA2X11 config MFD_SUN6I_PRCM bool "Allwinner A31 PRCM controller" - depends on ARCH_SUNXI + depends on ARCH_SUNXI || COMPILE_TEST select MFD_CORE help Support for the PRCM (Power/Reset/Clock Management) unit available @@ -1917,6 +1931,19 @@ config MFD_STPMIC1 To compile this driver as a module, choose M here: the module will be called stpmic1. +config MFD_STMFX + tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Support for the STMicroelectronics Multi-Function eXpander. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 71374c05b9ad..52b1a90ff515 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77620) += max77620.o +obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o obj-$(CONFIG_MFD_MAX77843) += max77843.o @@ -247,4 +248,4 @@ obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o - +obj-$(CONFIG_MFD_STMFX) += stmfx.o diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c index d8ddd1a6f304..436361ce3737 100644 --- a/drivers/mfd/max77620.c +++ b/drivers/mfd/max77620.c @@ -37,6 +37,8 @@ #include <linux/regmap.h> #include <linux/slab.h> +static struct max77620_chip *max77620_scratch; + static const struct resource gpio_resources[] = { DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO), }; @@ -111,6 +113,26 @@ static const struct mfd_cell max20024_children[] = { }, }; +static const struct mfd_cell max77663_children[] = { + { .name = "max77620-pinctrl", }, + { .name = "max77620-clock", }, + { .name = "max77663-pmic", }, + { .name = "max77620-watchdog", }, + { + .name = "max77620-gpio", + .resources = gpio_resources, + .num_resources = ARRAY_SIZE(gpio_resources), + }, { + .name = "max77620-rtc", + .resources = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), + }, { + .name = "max77663-power", + .resources = power_resources, + .num_resources = ARRAY_SIZE(power_resources), + }, +}; + static const struct regmap_range max77620_readable_ranges[] = { regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), }; @@ -171,6 +193,35 @@ static const struct regmap_config max20024_regmap_config = { .volatile_table = &max77620_volatile_table, }; +static const struct regmap_range max77663_readable_ranges[] = { + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5), +}; + +static const struct regmap_access_table max77663_readable_table = { + .yes_ranges = max77663_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges), +}; + +static const struct regmap_range max77663_writable_ranges[] = { + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5), +}; + +static const struct regmap_access_table max77663_writable_table = { + .yes_ranges = max77663_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges), +}; + +static const struct regmap_config max77663_regmap_config = { + .name = "power-slave", + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77620_REG_CID5 + 1, + .cache_type = REGCACHE_RBTREE, + .rd_table = &max77663_readable_table, + .wr_table = &max77663_writable_table, + .volatile_table = &max77620_volatile_table, +}; + /* * MAX77620 and MAX20024 has the following steps of the interrupt handling * for TOP interrupts: @@ -240,6 +291,9 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip, case MAX77620: fps_min_period = MAX77620_FPS_PERIOD_MIN_US; break; + case MAX77663: + fps_min_period = MAX20024_FPS_PERIOD_MIN_US; + break; default: return -EINVAL; } @@ -274,6 +328,9 @@ static int max77620_config_fps(struct max77620_chip *chip, case MAX77620: fps_max_period = MAX77620_FPS_PERIOD_MAX_US; break; + case MAX77663: + fps_max_period = MAX20024_FPS_PERIOD_MAX_US; + break; default: return -EINVAL; } @@ -375,6 +432,9 @@ static int max77620_initialise_fps(struct max77620_chip *chip) } skip_fps: + if (chip->chip_id == MAX77663) + return 0; + /* Enable wake on EN0 pin */ ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, MAX77620_ONOFFCNFG2_WK_EN0, @@ -423,6 +483,15 @@ static int max77620_read_es_version(struct max77620_chip *chip) return ret; } +static void max77620_pm_power_off(void) +{ + struct max77620_chip *chip = max77620_scratch; + + regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1, + MAX77620_ONOFFCNFG1_SFT_RST, + MAX77620_ONOFFCNFG1_SFT_RST); +} + static int max77620_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -430,6 +499,7 @@ static int max77620_probe(struct i2c_client *client, struct max77620_chip *chip; const struct mfd_cell *mfd_cells; int n_mfd_cells; + bool pm_off; int ret; chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); @@ -453,6 +523,11 @@ static int max77620_probe(struct i2c_client *client, n_mfd_cells = ARRAY_SIZE(max20024_children); rmap_config = &max20024_regmap_config; break; + case MAX77663: + mfd_cells = max77663_children; + n_mfd_cells = ARRAY_SIZE(max77663_children); + rmap_config = &max77663_regmap_config; + break; default: dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id); return -EINVAL; @@ -491,6 +566,12 @@ static int max77620_probe(struct i2c_client *client, return ret; } + pm_off = of_device_is_system_power_controller(client->dev.of_node); + if (pm_off && !pm_power_off) { + max77620_scratch = chip; + pm_power_off = max77620_pm_power_off; + } + return 0; } @@ -546,6 +627,9 @@ static int max77620_i2c_suspend(struct device *dev) return ret; } + if (chip->chip_id == MAX77663) + goto out; + /* Disable WK_EN0 */ ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, MAX77620_ONOFFCNFG2_WK_EN0, 0); @@ -581,7 +665,7 @@ static int max77620_i2c_resume(struct device *dev) * For MAX20024: No need to configure WKEN0 on resume as * it is configured on Init. */ - if (chip->chip_id == MAX20024) + if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663) goto out; /* Enable WK_EN0 */ @@ -603,6 +687,7 @@ out: static const struct i2c_device_id max77620_id[] = { {"max77620", MAX77620}, {"max20024", MAX20024}, + {"max77663", MAX77663}, {}, }; diff --git a/drivers/mfd/max77650.c b/drivers/mfd/max77650.c new file mode 100644 index 000000000000..60e07aca6ae5 --- /dev/null +++ b/drivers/mfd/max77650.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> +// +// Core MFD driver for MAXIM 77650/77651 charger/power-supply. +// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#define MAX77650_INT_GPI_F_MSK BIT(0) +#define MAX77650_INT_GPI_R_MSK BIT(1) +#define MAX77650_INT_GPI_MSK \ + (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK) +#define MAX77650_INT_nEN_F_MSK BIT(2) +#define MAX77650_INT_nEN_R_MSK BIT(3) +#define MAX77650_INT_TJAL1_R_MSK BIT(4) +#define MAX77650_INT_TJAL2_R_MSK BIT(5) +#define MAX77650_INT_DOD_R_MSK BIT(6) + +#define MAX77650_INT_THM_MSK BIT(0) +#define MAX77650_INT_CHG_MSK BIT(1) +#define MAX77650_INT_CHGIN_MSK BIT(2) +#define MAX77650_INT_TJ_REG_MSK BIT(3) +#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4) +#define MAX77650_INT_SYS_CTRL_MSK BIT(5) +#define MAX77650_INT_SYS_CNFG_MSK BIT(6) + +#define MAX77650_INT_GLBL_OFFSET 0 +#define MAX77650_INT_CHG_OFFSET 1 + +#define MAX77650_SBIA_LPM_MASK BIT(5) +#define MAX77650_SBIA_LPM_DISABLED 0x00 + +enum { + MAX77650_INT_GPI, + MAX77650_INT_nEN_F, + MAX77650_INT_nEN_R, + MAX77650_INT_TJAL1_R, + MAX77650_INT_TJAL2_R, + MAX77650_INT_DOD_R, + MAX77650_INT_THM, + MAX77650_INT_CHG, + MAX77650_INT_CHGIN, + MAX77650_INT_TJ_REG, + MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_SYS_CTRL, + MAX77650_INT_SYS_CNFG, +}; + +static const struct resource max77650_charger_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"), +}; + +static const struct resource max77650_gpio_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"), +}; + +static const struct resource max77650_onkey_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"), +}; + +static const struct mfd_cell max77650_cells[] = { + { + .name = "max77650-regulator", + .of_compatible = "maxim,max77650-regulator", + }, { + .name = "max77650-charger", + .of_compatible = "maxim,max77650-charger", + .resources = max77650_charger_resources, + .num_resources = ARRAY_SIZE(max77650_charger_resources), + }, { + .name = "max77650-gpio", + .of_compatible = "maxim,max77650-gpio", + .resources = max77650_gpio_resources, + .num_resources = ARRAY_SIZE(max77650_gpio_resources), + }, { + .name = "max77650-led", + .of_compatible = "maxim,max77650-led", + }, { + .name = "max77650-onkey", + .of_compatible = "maxim,max77650-onkey", + .resources = max77650_onkey_resources, + .num_resources = ARRAY_SIZE(max77650_onkey_resources), + }, +}; + +static const struct regmap_irq max77650_irqs[] = { + [MAX77650_INT_GPI] = { + .reg_offset = MAX77650_INT_GLBL_OFFSET, + .mask = MAX77650_INT_GPI_MSK, + .type = { + .type_falling_val = MAX77650_INT_GPI_F_MSK, + .type_rising_val = MAX77650_INT_GPI_R_MSK, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, + }, + REGMAP_IRQ_REG(MAX77650_INT_nEN_F, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK), + REGMAP_IRQ_REG(MAX77650_INT_nEN_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_DOD_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_THM, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJ_REG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK), +}; + +static const struct regmap_irq_chip max77650_irq_chip = { + .name = "max77650-irq", + .irqs = max77650_irqs, + .num_irqs = ARRAY_SIZE(max77650_irqs), + .num_regs = 2, + .status_base = MAX77650_REG_INT_GLBL, + .mask_base = MAX77650_REG_INTM_GLBL, + .type_in_mask = true, + .type_invert = true, + .init_ack_masked = true, + .clear_on_unmask = true, +}; + +static const struct regmap_config max77650_regmap_config = { + .name = "max77650", + .reg_bits = 8, + .val_bits = 8, +}; + +static int max77650_i2c_probe(struct i2c_client *i2c) +{ + struct regmap_irq_chip_data *irq_data; + struct device *dev = &i2c->dev; + struct irq_domain *domain; + struct regmap *map; + unsigned int val; + int rv, id; + + map = devm_regmap_init_i2c(i2c, &max77650_regmap_config); + if (IS_ERR(map)) { + dev_err(dev, "Unable to initialise I2C Regmap\n"); + return PTR_ERR(map); + } + + rv = regmap_read(map, MAX77650_REG_CID, &val); + if (rv) { + dev_err(dev, "Unable to read Chip ID\n"); + return rv; + } + + id = MAX77650_CID_BITS(val); + switch (id) { + case MAX77650_CID_77650A: + case MAX77650_CID_77650C: + case MAX77650_CID_77651A: + case MAX77650_CID_77651B: + break; + default: + dev_err(dev, "Chip not supported - ID: 0x%02x\n", id); + return -ENODEV; + } + + /* + * This IC has a low-power mode which reduces the quiescent current + * consumption to ~5.6uA but is only suitable for systems consuming + * less than ~2mA. Since this is not likely the case even on + * linux-based wearables - keep the chip in normal power mode. + */ + rv = regmap_update_bits(map, + MAX77650_REG_CNFG_GLBL, + MAX77650_SBIA_LPM_MASK, + MAX77650_SBIA_LPM_DISABLED); + if (rv) { + dev_err(dev, "Unable to change the power mode\n"); + return rv; + } + + rv = devm_regmap_add_irq_chip(dev, map, i2c->irq, + IRQF_ONESHOT | IRQF_SHARED, 0, + &max77650_irq_chip, &irq_data); + if (rv) { + dev_err(dev, "Unable to add Regmap IRQ chip\n"); + return rv; + } + + domain = regmap_irq_get_domain(irq_data); + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max77650_cells, ARRAY_SIZE(max77650_cells), + NULL, 0, domain); +} + +static const struct of_device_id max77650_of_match[] = { + { .compatible = "maxim,max77650" }, + { } +}; +MODULE_DEVICE_TABLE(of, max77650_of_match); + +static struct i2c_driver max77650_i2c_driver = { + .driver = { + .name = "max77650", + .of_match_table = of_match_ptr(max77650_of_match), + }, + .probe_new = max77650_i2c_probe, +}; +module_i2c_driver(max77650_i2c_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 94e3f32ce935..1ade4c8cc91f 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -269,6 +269,19 @@ fail_alloc: return ret; } +/** + * mfd_add_devices - register child devices + * + * @parent: Pointer to parent device. + * @id: Can be PLATFORM_DEVID_AUTO to let the Platform API take care + * of device numbering, or will be added to a device's cell_id. + * @cells: Array of (struct mfd_cell)s describing child devices. + * @n_devs: Number of child devices to register. + * @mem_base: Parent register range resource for child devices. + * @irq_base: Base of the range of virtual interrupt numbers allocated for + * this MFD device. Unused if @domain is specified. + * @domain: Interrupt domain to create mappings for hardware interrupts. + */ int mfd_add_devices(struct device *parent, int id, const struct mfd_cell *cells, int n_devs, struct resource *mem_base, diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c index 69df27769c21..43ac71691fe4 100644 --- a/drivers/mfd/sprd-sc27xx-spi.c +++ b/drivers/mfd/sprd-sc27xx-spi.c @@ -53,67 +53,67 @@ static const struct sprd_pmic_data sc2731_data = { static const struct mfd_cell sprd_pmic_devs[] = { { .name = "sc27xx-wdt", - .of_compatible = "sprd,sc27xx-wdt", + .of_compatible = "sprd,sc2731-wdt", }, { .name = "sc27xx-rtc", - .of_compatible = "sprd,sc27xx-rtc", + .of_compatible = "sprd,sc2731-rtc", }, { .name = "sc27xx-charger", - .of_compatible = "sprd,sc27xx-charger", + .of_compatible = "sprd,sc2731-charger", }, { .name = "sc27xx-chg-timer", - .of_compatible = "sprd,sc27xx-chg-timer", + .of_compatible = "sprd,sc2731-chg-timer", }, { .name = "sc27xx-fast-chg", - .of_compatible = "sprd,sc27xx-fast-chg", + .of_compatible = "sprd,sc2731-fast-chg", }, { .name = "sc27xx-chg-wdt", - .of_compatible = "sprd,sc27xx-chg-wdt", + .of_compatible = "sprd,sc2731-chg-wdt", }, { .name = "sc27xx-typec", - .of_compatible = "sprd,sc27xx-typec", + .of_compatible = "sprd,sc2731-typec", }, { .name = "sc27xx-flash", - .of_compatible = "sprd,sc27xx-flash", + .of_compatible = "sprd,sc2731-flash", }, { .name = "sc27xx-eic", - .of_compatible = "sprd,sc27xx-eic", + .of_compatible = "sprd,sc2731-eic", }, { .name = "sc27xx-efuse", - .of_compatible = "sprd,sc27xx-efuse", + .of_compatible = "sprd,sc2731-efuse", }, { .name = "sc27xx-thermal", - .of_compatible = "sprd,sc27xx-thermal", + .of_compatible = "sprd,sc2731-thermal", }, { .name = "sc27xx-adc", - .of_compatible = "sprd,sc27xx-adc", + .of_compatible = "sprd,sc2731-adc", }, { .name = "sc27xx-audio-codec", - .of_compatible = "sprd,sc27xx-audio-codec", + .of_compatible = "sprd,sc2731-audio-codec", }, { .name = "sc27xx-regulator", - .of_compatible = "sprd,sc27xx-regulator", + .of_compatible = "sprd,sc2731-regulator", }, { .name = "sc27xx-vibrator", - .of_compatible = "sprd,sc27xx-vibrator", + .of_compatible = "sprd,sc2731-vibrator", }, { .name = "sc27xx-keypad-led", - .of_compatible = "sprd,sc27xx-keypad-led", + .of_compatible = "sprd,sc2731-keypad-led", }, { .name = "sc27xx-bltc", - .of_compatible = "sprd,sc27xx-bltc", + .of_compatible = "sprd,sc2731-bltc", }, { .name = "sc27xx-fgu", - .of_compatible = "sprd,sc27xx-fgu", + .of_compatible = "sprd,sc2731-fgu", }, { .name = "sc27xx-7sreset", - .of_compatible = "sprd,sc27xx-7sreset", + .of_compatible = "sprd,sc2731-7sreset", }, { .name = "sc27xx-poweroff", - .of_compatible = "sprd,sc27xx-poweroff", + .of_compatible = "sprd,sc2731-poweroff", }, { .name = "sc27xx-syscon", - .of_compatible = "sprd,sc27xx-syscon", + .of_compatible = "sprd,sc2731-syscon", }, }; diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c new file mode 100644 index 000000000000..fe8efba2d45f --- /dev/null +++ b/drivers/mfd/stmfx.c @@ -0,0 +1,545 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for STMicroelectronics Multi-Function eXpander (STMFX) core + * + * Copyright (C) 2019 STMicroelectronics + * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. + */ +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/stmfx.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> + +static bool stmfx_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STMFX_REG_SYS_CTRL: + case STMFX_REG_IRQ_SRC_EN: + case STMFX_REG_IRQ_PENDING: + case STMFX_REG_IRQ_GPI_PENDING1: + case STMFX_REG_IRQ_GPI_PENDING2: + case STMFX_REG_IRQ_GPI_PENDING3: + case STMFX_REG_GPIO_STATE1: + case STMFX_REG_GPIO_STATE2: + case STMFX_REG_GPIO_STATE3: + case STMFX_REG_IRQ_GPI_SRC1: + case STMFX_REG_IRQ_GPI_SRC2: + case STMFX_REG_IRQ_GPI_SRC3: + case STMFX_REG_GPO_SET1: + case STMFX_REG_GPO_SET2: + case STMFX_REG_GPO_SET3: + case STMFX_REG_GPO_CLR1: + case STMFX_REG_GPO_CLR2: + case STMFX_REG_GPO_CLR3: + return true; + default: + return false; + } +} + +static bool stmfx_reg_writeable(struct device *dev, unsigned int reg) +{ + return (reg >= STMFX_REG_SYS_CTRL); +} + +static const struct regmap_config stmfx_regmap_config = { + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, + .max_register = STMFX_REG_MAX, + .volatile_reg = stmfx_reg_volatile, + .writeable_reg = stmfx_reg_writeable, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct resource stmfx_pinctrl_resources[] = { + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_GPIO), +}; + +static const struct resource stmfx_idd_resources[] = { + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_IDD), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_ERROR), +}; + +static const struct resource stmfx_ts_resources[] = { + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_DET), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_NE), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_TH), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_FULL), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_OVF), +}; + +static struct mfd_cell stmfx_cells[] = { + { + .of_compatible = "st,stmfx-0300-pinctrl", + .name = "stmfx-pinctrl", + .resources = stmfx_pinctrl_resources, + .num_resources = ARRAY_SIZE(stmfx_pinctrl_resources), + }, + { + .of_compatible = "st,stmfx-0300-idd", + .name = "stmfx-idd", + .resources = stmfx_idd_resources, + .num_resources = ARRAY_SIZE(stmfx_idd_resources), + }, + { + .of_compatible = "st,stmfx-0300-ts", + .name = "stmfx-ts", + .resources = stmfx_ts_resources, + .num_resources = ARRAY_SIZE(stmfx_ts_resources), + }, +}; + +static u8 stmfx_func_to_mask(u32 func) +{ + u8 mask = 0; + + if (func & STMFX_FUNC_GPIO) + mask |= STMFX_REG_SYS_CTRL_GPIO_EN; + + if ((func & STMFX_FUNC_ALTGPIO_LOW) || (func & STMFX_FUNC_ALTGPIO_HIGH)) + mask |= STMFX_REG_SYS_CTRL_ALTGPIO_EN; + + if (func & STMFX_FUNC_TS) + mask |= STMFX_REG_SYS_CTRL_TS_EN; + + if (func & STMFX_FUNC_IDD) + mask |= STMFX_REG_SYS_CTRL_IDD_EN; + + return mask; +} + +int stmfx_function_enable(struct stmfx *stmfx, u32 func) +{ + u32 sys_ctrl; + u8 mask; + int ret; + + ret = regmap_read(stmfx->map, STMFX_REG_SYS_CTRL, &sys_ctrl); + if (ret) + return ret; + + /* + * IDD and TS have priority in STMFX FW, so if IDD and TS are enabled, + * ALTGPIO function is disabled by STMFX FW. If IDD or TS is enabled, + * the number of aGPIO available decreases. To avoid GPIO management + * disturbance, abort IDD or TS function enable in this case. + */ + if (((func & STMFX_FUNC_IDD) || (func & STMFX_FUNC_TS)) && + (sys_ctrl & STMFX_REG_SYS_CTRL_ALTGPIO_EN)) { + dev_err(stmfx->dev, "ALTGPIO function already enabled\n"); + return -EBUSY; + } + + /* If TS is enabled, aGPIO[3:0] cannot be used */ + if ((func & STMFX_FUNC_ALTGPIO_LOW) && + (sys_ctrl & STMFX_REG_SYS_CTRL_TS_EN)) { + dev_err(stmfx->dev, "TS in use, aGPIO[3:0] unavailable\n"); + return -EBUSY; + } + + /* If IDD is enabled, aGPIO[7:4] cannot be used */ + if ((func & STMFX_FUNC_ALTGPIO_HIGH) && + (sys_ctrl & STMFX_REG_SYS_CTRL_IDD_EN)) { + dev_err(stmfx->dev, "IDD in use, aGPIO[7:4] unavailable\n"); + return -EBUSY; + } + + mask = stmfx_func_to_mask(func); + + return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, mask); +} +EXPORT_SYMBOL_GPL(stmfx_function_enable); + +int stmfx_function_disable(struct stmfx *stmfx, u32 func) +{ + u8 mask = stmfx_func_to_mask(func); + + return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, 0); +} +EXPORT_SYMBOL_GPL(stmfx_function_disable); + +static void stmfx_irq_bus_lock(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + mutex_lock(&stmfx->lock); +} + +static void stmfx_irq_bus_sync_unlock(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, stmfx->irq_src); + + mutex_unlock(&stmfx->lock); +} + +static void stmfx_irq_mask(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + stmfx->irq_src &= ~BIT(data->hwirq % 8); +} + +static void stmfx_irq_unmask(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + stmfx->irq_src |= BIT(data->hwirq % 8); +} + +static struct irq_chip stmfx_irq_chip = { + .name = "stmfx-core", + .irq_bus_lock = stmfx_irq_bus_lock, + .irq_bus_sync_unlock = stmfx_irq_bus_sync_unlock, + .irq_mask = stmfx_irq_mask, + .irq_unmask = stmfx_irq_unmask, +}; + +static irqreturn_t stmfx_irq_handler(int irq, void *data) +{ + struct stmfx *stmfx = data; + unsigned long n, pending; + u32 ack; + int ret; + + ret = regmap_read(stmfx->map, STMFX_REG_IRQ_PENDING, + (u32 *)&pending); + if (ret) + return IRQ_NONE; + + /* + * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR + * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3 + */ + ack = pending & ~BIT(STMFX_REG_IRQ_SRC_EN_GPIO); + if (ack) { + ret = regmap_write(stmfx->map, STMFX_REG_IRQ_ACK, ack); + if (ret) + return IRQ_NONE; + } + + for_each_set_bit(n, &pending, STMFX_REG_IRQ_SRC_MAX) + handle_nested_irq(irq_find_mapping(stmfx->irq_domain, n)); + + return IRQ_HANDLED; +} + +static int stmfx_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(virq, d->host_data); + irq_set_chip_and_handler(virq, &stmfx_irq_chip, handle_simple_irq); + irq_set_nested_thread(virq, 1); + irq_set_noprobe(virq); + + return 0; +} + +static void stmfx_irq_unmap(struct irq_domain *d, unsigned int virq) +{ + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static const struct irq_domain_ops stmfx_irq_ops = { + .map = stmfx_irq_map, + .unmap = stmfx_irq_unmap, +}; + +static void stmfx_irq_exit(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + int hwirq; + + for (hwirq = 0; hwirq < STMFX_REG_IRQ_SRC_MAX; hwirq++) + irq_dispose_mapping(irq_find_mapping(stmfx->irq_domain, hwirq)); + + irq_domain_remove(stmfx->irq_domain); +} + +static int stmfx_irq_init(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + u32 irqoutpin = 0, irqtrigger; + int ret; + + stmfx->irq_domain = irq_domain_add_simple(stmfx->dev->of_node, + STMFX_REG_IRQ_SRC_MAX, 0, + &stmfx_irq_ops, stmfx); + if (!stmfx->irq_domain) { + dev_err(stmfx->dev, "Failed to create IRQ domain\n"); + return -EINVAL; + } + + if (!of_property_read_bool(stmfx->dev->of_node, "drive-open-drain")) + irqoutpin |= STMFX_REG_IRQ_OUT_PIN_TYPE; + + irqtrigger = irq_get_trigger_type(client->irq); + if ((irqtrigger & IRQ_TYPE_EDGE_RISING) || + (irqtrigger & IRQ_TYPE_LEVEL_HIGH)) + irqoutpin |= STMFX_REG_IRQ_OUT_PIN_POL; + + ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin); + if (ret) + return ret; + + ret = devm_request_threaded_irq(stmfx->dev, client->irq, + NULL, stmfx_irq_handler, + irqtrigger | IRQF_ONESHOT, + "stmfx", stmfx); + if (ret) + stmfx_irq_exit(client); + + return ret; +} + +static int stmfx_chip_reset(struct stmfx *stmfx) +{ + int ret; + + ret = regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, + STMFX_REG_SYS_CTRL_SWRST); + if (ret) + return ret; + + msleep(STMFX_BOOT_TIME_MS); + + return ret; +} + +static int stmfx_chip_init(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + u32 id; + u8 version[2]; + int ret; + + stmfx->vdd = devm_regulator_get_optional(&client->dev, "vdd"); + ret = PTR_ERR_OR_ZERO(stmfx->vdd); + if (ret == -ENODEV) { + stmfx->vdd = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else if (ret) { + dev_err(&client->dev, "Failed to get VDD regulator: %d\n", ret); + return ret; + } + + if (stmfx->vdd) { + ret = regulator_enable(stmfx->vdd); + if (ret) { + dev_err(&client->dev, "VDD enable failed: %d\n", ret); + return ret; + } + } + + ret = regmap_read(stmfx->map, STMFX_REG_CHIP_ID, &id); + if (ret) { + dev_err(&client->dev, "Error reading chip ID: %d\n", ret); + goto err; + } + + /* + * Check that ID is the complement of the I2C address: + * STMFX I2C address follows the 7-bit format (MSB), that's why + * client->addr is shifted. + * + * STMFX_I2C_ADDR| STMFX | Linux + * input pin | I2C device address | I2C device address + *--------------------------------------------------------- + * 0 | b: 1000 010x h:0x84 | 0x42 + * 1 | b: 1000 011x h:0x86 | 0x43 + */ + if (FIELD_GET(STMFX_REG_CHIP_ID_MASK, ~id) != (client->addr << 1)) { + dev_err(&client->dev, "Unknown chip ID: %#x\n", id); + ret = -EINVAL; + goto err; + } + + ret = regmap_bulk_read(stmfx->map, STMFX_REG_FW_VERSION_MSB, + version, ARRAY_SIZE(version)); + if (ret) { + dev_err(&client->dev, "Error reading FW version: %d\n", ret); + goto err; + } + + dev_info(&client->dev, "STMFX id: %#x, fw version: %x.%02x\n", + id, version[0], version[1]); + + ret = stmfx_chip_reset(stmfx); + if (ret) { + dev_err(&client->dev, "Failed to reset chip: %d\n", ret); + goto err; + } + + return 0; + +err: + if (stmfx->vdd) + return regulator_disable(stmfx->vdd); + + return ret; +} + +static int stmfx_chip_exit(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + + regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, 0); + regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0); + + if (stmfx->vdd) + return regulator_disable(stmfx->vdd); + + return 0; +} + +static int stmfx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct stmfx *stmfx; + int ret; + + stmfx = devm_kzalloc(dev, sizeof(*stmfx), GFP_KERNEL); + if (!stmfx) + return -ENOMEM; + + i2c_set_clientdata(client, stmfx); + + stmfx->dev = dev; + + stmfx->map = devm_regmap_init_i2c(client, &stmfx_regmap_config); + if (IS_ERR(stmfx->map)) { + ret = PTR_ERR(stmfx->map); + dev_err(dev, "Failed to allocate register map: %d\n", ret); + return ret; + } + + mutex_init(&stmfx->lock); + + ret = stmfx_chip_init(client); + if (ret) { + if (ret == -ETIMEDOUT) + return -EPROBE_DEFER; + return ret; + } + + if (client->irq < 0) { + dev_err(dev, "Failed to get IRQ: %d\n", client->irq); + ret = client->irq; + goto err_chip_exit; + } + + ret = stmfx_irq_init(client); + if (ret) + goto err_chip_exit; + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + stmfx_cells, ARRAY_SIZE(stmfx_cells), NULL, + 0, stmfx->irq_domain); + if (ret) + goto err_irq_exit; + + return 0; + +err_irq_exit: + stmfx_irq_exit(client); +err_chip_exit: + stmfx_chip_exit(client); + + return ret; +} + +static int stmfx_remove(struct i2c_client *client) +{ + stmfx_irq_exit(client); + + return stmfx_chip_exit(client); +} + +#ifdef CONFIG_PM_SLEEP +static int stmfx_suspend(struct device *dev) +{ + struct stmfx *stmfx = dev_get_drvdata(dev); + int ret; + + ret = regmap_raw_read(stmfx->map, STMFX_REG_SYS_CTRL, + &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl)); + if (ret) + return ret; + + ret = regmap_raw_read(stmfx->map, STMFX_REG_IRQ_OUT_PIN, + &stmfx->bkp_irqoutpin, + sizeof(stmfx->bkp_irqoutpin)); + if (ret) + return ret; + + if (stmfx->vdd) + return regulator_disable(stmfx->vdd); + + return 0; +} + +static int stmfx_resume(struct device *dev) +{ + struct stmfx *stmfx = dev_get_drvdata(dev); + int ret; + + if (stmfx->vdd) { + ret = regulator_enable(stmfx->vdd); + if (ret) { + dev_err(stmfx->dev, + "VDD enable failed: %d\n", ret); + return ret; + } + } + + ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL, + &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl)); + if (ret) + return ret; + + ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, + &stmfx->bkp_irqoutpin, + sizeof(stmfx->bkp_irqoutpin)); + if (ret) + return ret; + + ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, + &stmfx->irq_src, sizeof(stmfx->irq_src)); + if (ret) + return ret; + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(stmfx_dev_pm_ops, stmfx_suspend, stmfx_resume); + +static const struct of_device_id stmfx_of_match[] = { + { .compatible = "st,stmfx-0300", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stmfx_of_match); + +static struct i2c_driver stmfx_driver = { + .driver = { + .name = "stmfx-core", + .of_match_table = of_match_ptr(stmfx_of_match), + .pm = &stmfx_dev_pm_ops, + }, + .probe = stmfx_probe, + .remove = stmfx_remove, +}; +module_i2c_driver(stmfx_driver); + +MODULE_DESCRIPTION("STMFX core driver"); +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index 37d0bdb291c3..b06cb908d1aa 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -54,14 +54,6 @@ static void ti_lmu_disable_hw(void *data) gpiod_set_value(lmu->en_gpio, 0); } -static const struct mfd_cell lm3532_devices[] = { - { - .name = "ti-lmu-backlight", - .id = LM3532, - .of_compatible = "ti,lm3532-backlight", - }, -}; - #define LM363X_REGULATOR(_id) \ { \ .name = "lm363x-regulator", \ @@ -141,7 +133,6 @@ static const struct ti_lmu_data chip##_data = \ .max_register = max_reg, \ } \ -TI_LMU_DATA(lm3532, LM3532_MAX_REG); TI_LMU_DATA(lm3631, LM3631_MAX_REG); TI_LMU_DATA(lm3632, LM3632_MAX_REG); TI_LMU_DATA(lm3633, LM3633_MAX_REG); @@ -211,7 +202,6 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) } static const struct of_device_id ti_lmu_of_match[] = { - { .compatible = "ti,lm3532", .data = &lm3532_data }, { .compatible = "ti,lm3631", .data = &lm3631_data }, { .compatible = "ti,lm3632", .data = &lm3632_data }, { .compatible = "ti,lm3633", .data = &lm3633_data }, @@ -222,7 +212,6 @@ static const struct of_device_id ti_lmu_of_match[] = { MODULE_DEVICE_TABLE(of, ti_lmu_of_match); static const struct i2c_device_id ti_lmu_ids[] = { - { "lm3532", LM3532 }, { "lm3631", LM3631 }, { "lm3632", LM3632 }, { "lm3633", LM3633 }, diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 299016bc46d9..104477b512a2 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1245,6 +1245,28 @@ free: return status; } +static int __maybe_unused twl_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (client->irq) + disable_irq(client->irq); + + return 0; +} + +static int __maybe_unused twl_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (client->irq) + enable_irq(client->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume); + static const struct i2c_device_id twl_ids[] = { { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ { "twl5030", 0 }, /* T2 updated */ @@ -1262,6 +1284,7 @@ static const struct i2c_device_id twl_ids[] = { /* One Client Driver , 4 Clients */ static struct i2c_driver twl_driver = { .driver.name = DRIVER_NAME, + .driver.pm = &twl_dev_pm_ops, .id_table = twl_ids, .probe = twl_probe, .remove = twl_remove, |