diff options
Diffstat (limited to 'drivers/misc/mei/hw-txe.c')
| -rw-r--r-- | drivers/misc/mei/hw-txe.c | 252 |
1 files changed, 162 insertions, 90 deletions
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c index f1cd166094f2..c5e1902e493f 100644 --- a/drivers/misc/mei/hw-txe.c +++ b/drivers/misc/mei/hw-txe.c @@ -28,11 +28,12 @@ #include "hbm.h" /** - * mei_txe_reg_read - Reads 32bit data from the device + * mei_txe_reg_read - Reads 32bit data from the txe device * * @base_addr: registers base address * @offset: register offset * + * Return: register value */ static inline u32 mei_txe_reg_read(void __iomem *base_addr, unsigned long offset) @@ -41,7 +42,7 @@ static inline u32 mei_txe_reg_read(void __iomem *base_addr, } /** - * mei_txe_reg_write - Writes 32bit data to the device + * mei_txe_reg_write - Writes 32bit data to the txe device * * @base_addr: registers base address * @offset: register offset @@ -56,10 +57,12 @@ static inline void mei_txe_reg_write(void __iomem *base_addr, /** * mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR * - * @dev: the device structure + * @hw: the txe hardware structure * @offset: register offset * * Doesn't check for aliveness while Reads 32bit data from the SeC BAR + * + * Return: register value */ static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw, unsigned long offset) @@ -70,10 +73,12 @@ static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw, /** * mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR * - * @dev: the device structure + * @hw: the txe hardware structure * @offset: register offset * * Reads 32bit data from the SeC BAR and shout loud if aliveness is not set + * + * Return: register value */ static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw, unsigned long offset) @@ -85,7 +90,7 @@ static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw, * mei_txe_sec_reg_write_silent - Writes 32bit data to the SeC BAR * doesn't check for aliveness * - * @dev: the device structure + * @hw: the txe hardware structure * @offset: register offset * @value: value to write * @@ -100,7 +105,7 @@ static inline void mei_txe_sec_reg_write_silent(struct mei_txe_hw *hw, /** * mei_txe_sec_reg_write - Writes 32bit data to the SeC BAR * - * @dev: the device structure + * @hw: the txe hardware structure * @offset: register offset * @value: value to write * @@ -115,9 +120,10 @@ static inline void mei_txe_sec_reg_write(struct mei_txe_hw *hw, /** * mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR * - * @hw: the device structure + * @hw: the txe hardware structure * @offset: offset from which to read the data * + * Return: the byte read. */ static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw, unsigned long offset) @@ -128,7 +134,7 @@ static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw, /** * mei_txe_br_reg_write - Writes 32bit data to the Bridge BAR * - * @hw: the device structure + * @hw: the txe hardware structure * @offset: offset from which to write the data * @value: the byte to write */ @@ -147,7 +153,10 @@ static inline void mei_txe_br_reg_write(struct mei_txe_hw *hw, * Request for aliveness change and returns true if the change is * really needed and false if aliveness is already * in the requested state - * Requires device lock to be held + * + * Locking: called under "dev->device_lock" lock + * + * Return: true if request was send */ static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req) { @@ -155,7 +164,7 @@ static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req) struct mei_txe_hw *hw = to_txe_hw(dev); bool do_req = hw->aliveness != req; - dev_dbg(&dev->pdev->dev, "Aliveness current=%d request=%d\n", + dev_dbg(dev->dev, "Aliveness current=%d request=%d\n", hw->aliveness, req); if (do_req) { dev->pg_event = MEI_PG_EVENT_WAIT; @@ -172,26 +181,31 @@ static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req) * * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from * from HICR_HOST_ALIVENESS_REQ register value + * + * Return: SICR_HOST_ALIVENESS_REQ_REQUESTED bit value */ static u32 mei_txe_aliveness_req_get(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); u32 reg; + reg = mei_txe_br_reg_read(hw, SICR_HOST_ALIVENESS_REQ_REG); return reg & SICR_HOST_ALIVENESS_REQ_REQUESTED; } /** * mei_txe_aliveness_get - get aliveness response register value + * * @dev: the device structure * - * Extract HICR_HOST_ALIVENESS_RESP_ACK bit - * from HICR_HOST_ALIVENESS_RESP register value + * Return: HICR_HOST_ALIVENESS_RESP_ACK bit from HICR_HOST_ALIVENESS_RESP + * register */ static u32 mei_txe_aliveness_get(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); u32 reg; + reg = mei_txe_br_reg_read(hw, HICR_HOST_ALIVENESS_RESP_REG); return reg & HICR_HOST_ALIVENESS_RESP_ACK; } @@ -203,7 +217,8 @@ static u32 mei_txe_aliveness_get(struct mei_device *dev) * @expected: expected aliveness value * * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set - * returns > 0 if the expected value was received, -ETIME otherwise + * + * Return: > 0 if the expected value was received, -ETIME otherwise */ static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected) { @@ -214,7 +229,7 @@ static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected) hw->aliveness = mei_txe_aliveness_get(dev); if (hw->aliveness == expected) { dev->pg_event = MEI_PG_EVENT_IDLE; - dev_dbg(&dev->pdev->dev, + dev_dbg(dev->dev, "aliveness settled after %d msecs\n", t); return t; } @@ -225,7 +240,7 @@ static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected) } while (t < SEC_ALIVENESS_WAIT_TIMEOUT); dev->pg_event = MEI_PG_EVENT_IDLE; - dev_err(&dev->pdev->dev, "aliveness timed out\n"); + dev_err(dev->dev, "aliveness timed out\n"); return -ETIME; } @@ -236,7 +251,8 @@ static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected) * @expected: expected aliveness value * * Waits for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set - * returns returns 0 on success and < 0 otherwise + * + * Return: 0 on success and < 0 otherwise */ static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected) { @@ -259,10 +275,10 @@ static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected) ret = hw->aliveness == expected ? 0 : -ETIME; if (ret) - dev_warn(&dev->pdev->dev, "aliveness timed out = %ld aliveness = %d event = %d\n", + dev_warn(dev->dev, "aliveness timed out = %ld aliveness = %d event = %d\n", err, hw->aliveness, dev->pg_event); else - dev_dbg(&dev->pdev->dev, "aliveness settled after = %d msec aliveness = %d event = %d\n", + dev_dbg(dev->dev, "aliveness settled after = %d msec aliveness = %d event = %d\n", jiffies_to_msecs(timeout - err), hw->aliveness, dev->pg_event); @@ -274,8 +290,9 @@ static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected) * mei_txe_aliveness_set_sync - sets an wait for aliveness to complete * * @dev: the device structure + * @req: requested aliveness value * - * returns returns 0 on success and < 0 otherwise + * Return: 0 on success and < 0 otherwise */ int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req) { @@ -289,7 +306,7 @@ int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req) * * @dev: the device structure * - * returns: true is pg supported, false otherwise + * Return: true is pg supported, false otherwise */ static bool mei_txe_pg_is_enabled(struct mei_device *dev) { @@ -302,11 +319,12 @@ static bool mei_txe_pg_is_enabled(struct mei_device *dev) * * @dev: the device structure * - * returns: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise + * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise */ static inline enum mei_pg_state mei_txe_pg_state(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + return hw->aliveness ? MEI_PG_OFF : MEI_PG_ON; } @@ -326,9 +344,10 @@ static void mei_txe_input_ready_interrupt_enable(struct mei_device *dev) } /** - * mei_txe_input_doorbell_set - * - Sets bit 0 in SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL. - * @dev: the device structure + * mei_txe_input_doorbell_set - sets bit 0 in + * SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL. + * + * @hw: the txe hardware structure */ static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw) { @@ -340,7 +359,7 @@ static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw) /** * mei_txe_output_ready_set - Sets the SICR_SEC_IPC_OUTPUT_STATUS bit to 1 * - * @dev: the device structure + * @hw: the txe hardware structure */ static void mei_txe_output_ready_set(struct mei_txe_hw *hw) { @@ -353,11 +372,14 @@ static void mei_txe_output_ready_set(struct mei_txe_hw *hw) * mei_txe_is_input_ready - check if TXE is ready for receiving data * * @dev: the device structure + * + * Return: true if INPUT STATUS READY bit is set */ static bool mei_txe_is_input_ready(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); u32 status; + status = mei_txe_sec_reg_read(hw, SEC_IPC_INPUT_STATUS_REG); return !!(SEC_IPC_INPUT_STATUS_RDY & status); } @@ -370,6 +392,7 @@ static bool mei_txe_is_input_ready(struct mei_device *dev) static inline void mei_txe_intr_clear(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + mei_txe_sec_reg_write_silent(hw, SEC_IPC_HOST_INT_STATUS_REG, SEC_IPC_HOST_INT_STATUS_PENDING); mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_STS_MSK); @@ -384,6 +407,7 @@ static inline void mei_txe_intr_clear(struct mei_device *dev) static void mei_txe_intr_disable(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + mei_txe_br_reg_write(hw, HHIER_REG, 0); mei_txe_br_reg_write(hw, HIER_REG, 0); } @@ -395,6 +419,7 @@ static void mei_txe_intr_disable(struct mei_device *dev) static void mei_txe_intr_enable(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + mei_txe_br_reg_write(hw, HHIER_REG, IPC_HHIER_MSK); mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK); } @@ -407,6 +432,8 @@ static void mei_txe_intr_enable(struct mei_device *dev) * * Checks if there are pending interrupts * only Aliveness, Readiness, Input ready, and Output doorbell are relevant + * + * Return: true if there are pending interrupts */ static bool mei_txe_pending_interrupts(struct mei_device *dev) { @@ -418,7 +445,7 @@ static bool mei_txe_pending_interrupts(struct mei_device *dev) TXE_INTR_OUT_DB)); if (ret) { - dev_dbg(&dev->pdev->dev, + dev_dbg(dev->dev, "Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n", !!(hw->intr_cause & TXE_INTR_IN_READY), !!(hw->intr_cause & TXE_INTR_READINESS), @@ -440,6 +467,7 @@ static void mei_txe_input_payload_write(struct mei_device *dev, unsigned long idx, u32 value) { struct mei_txe_hw *hw = to_txe_hw(dev); + mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_PAYLOAD_REG + (idx * sizeof(u32)), value); } @@ -451,12 +479,13 @@ static void mei_txe_input_payload_write(struct mei_device *dev, * @dev: the device structure * @idx: index in the device buffer * - * returns register value at index + * Return: register value at index */ static u32 mei_txe_out_data_read(const struct mei_device *dev, unsigned long idx) { struct mei_txe_hw *hw = to_txe_hw(dev); + return mei_txe_br_reg_read(hw, BRIDGE_IPC_OUTPUT_PAYLOAD_REG + (idx * sizeof(u32))); } @@ -464,26 +493,28 @@ static u32 mei_txe_out_data_read(const struct mei_device *dev, /* Readiness */ /** - * mei_txe_readiness_set_host_rdy + * mei_txe_readiness_set_host_rdy - set host readiness bit * * @dev: the device structure */ static void mei_txe_readiness_set_host_rdy(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG, SICR_HOST_IPC_READINESS_HOST_RDY); } /** - * mei_txe_readiness_clear + * mei_txe_readiness_clear - clear host readiness bit * * @dev: the device structure */ static void mei_txe_readiness_clear(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG, SICR_HOST_IPC_READINESS_RDY_CLR); } @@ -492,10 +523,13 @@ static void mei_txe_readiness_clear(struct mei_device *dev) * the HICR_SEC_IPC_READINESS register value * * @dev: the device structure + * + * Return: the HICR_SEC_IPC_READINESS register value */ static u32 mei_txe_readiness_get(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + return mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG); } @@ -504,7 +538,9 @@ static u32 mei_txe_readiness_get(struct mei_device *dev) * mei_txe_readiness_is_sec_rdy - check readiness * for HICR_SEC_IPC_READINESS_SEC_RDY * - * @readiness - cached readiness state + * @readiness: cached readiness state + * + * Return: true if readiness bit is set */ static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness) { @@ -515,10 +551,13 @@ static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness) * mei_txe_hw_is_ready - check if the hw is ready * * @dev: the device structure + * + * Return: true if sec is ready */ static bool mei_txe_hw_is_ready(struct mei_device *dev) { u32 readiness = mei_txe_readiness_get(dev); + return mei_txe_readiness_is_sec_rdy(readiness); } @@ -526,11 +565,14 @@ static bool mei_txe_hw_is_ready(struct mei_device *dev) * mei_txe_host_is_ready - check if the host is ready * * @dev: the device structure + * + * Return: true if host is ready */ static inline bool mei_txe_host_is_ready(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); u32 reg = mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG); + return !!(reg & HICR_SEC_IPC_READINESS_HOST_RDY); } @@ -539,7 +581,7 @@ static inline bool mei_txe_host_is_ready(struct mei_device *dev) * * @dev: the device structure * - * returns 0 on success and -ETIME on timeout + * Return: 0 on success and -ETIME on timeout */ static int mei_txe_readiness_wait(struct mei_device *dev) { @@ -551,7 +593,7 @@ static int mei_txe_readiness_wait(struct mei_device *dev) msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT)); mutex_lock(&dev->device_lock); if (!dev->recvd_hw_ready) { - dev_err(&dev->pdev->dev, "wait for readiness failed\n"); + dev_err(dev->dev, "wait for readiness failed\n"); return -ETIME; } @@ -559,6 +601,42 @@ static int mei_txe_readiness_wait(struct mei_device *dev) return 0; } +static const struct mei_fw_status mei_txe_fw_sts = { + .count = 2, + .status[0] = PCI_CFG_TXE_FW_STS0, + .status[1] = PCI_CFG_TXE_FW_STS1 +}; + +/** + * mei_txe_fw_status - read fw status register from pci config space + * + * @dev: mei device + * @fw_status: fw status register values + * + * Return: 0 on success, error otherwise + */ +static int mei_txe_fw_status(struct mei_device *dev, + struct mei_fw_status *fw_status) +{ + const struct mei_fw_status *fw_src = &mei_txe_fw_sts; + struct pci_dev *pdev = to_pci_dev(dev->dev); + int ret; + int i; + + if (!fw_status) + return -EINVAL; + + fw_status->count = fw_src->count; + for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) { + ret = pci_read_config_dword(pdev, + fw_src->status[i], &fw_status->status[i]); + if (ret) + return ret; + } + + return 0; +} + /** * mei_txe_hw_config - configure hardware at the start of the devices * @@ -571,13 +649,14 @@ static void mei_txe_hw_config(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + /* Doesn't change in runtime */ dev->hbuf_depth = PAYLOAD_SIZE / 4; hw->aliveness = mei_txe_aliveness_get(dev); hw->readiness = mei_txe_readiness_get(dev); - dev_dbg(&dev->pdev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n", + dev_dbg(dev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n", hw->aliveness, hw->readiness); } @@ -588,7 +667,8 @@ static void mei_txe_hw_config(struct mei_device *dev) * @dev: the device structure * @header: header of message * @buf: message buffer will be written - * returns 1 if success, 0 - otherwise. + * + * Return: 0 if success, <0 - otherwise. */ static int mei_txe_write(struct mei_device *dev, @@ -607,7 +687,7 @@ static int mei_txe_write(struct mei_device *dev, length = header->length; - dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header)); + dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header)); dw_cnt = mei_data2slots(length); if (dw_cnt > slots) @@ -621,8 +701,9 @@ static int mei_txe_write(struct mei_device *dev, if (!mei_txe_is_input_ready(dev)) { struct mei_fw_status fw_status; + mei_fw_status(dev, &fw_status); - dev_err(&dev->pdev->dev, "Input is not ready " FW_STS_FMT "\n", + dev_err(dev->dev, "Input is not ready " FW_STS_FMT "\n", FW_STS_PRM(fw_status)); return -EAGAIN; } @@ -635,6 +716,7 @@ static int mei_txe_write(struct mei_device *dev, rem = length & 0x3; if (rem > 0) { u32 reg = 0; + memcpy(®, &buf[length - rem], rem); mei_txe_input_payload_write(dev, i + 1, reg); } @@ -653,7 +735,7 @@ static int mei_txe_write(struct mei_device *dev, * * @dev: the device structure * - * returns the PAYLOAD_SIZE - 4 + * Return: the PAYLOAD_SIZE - 4 */ static size_t mei_txe_hbuf_max_len(const struct mei_device *dev) { @@ -665,11 +747,12 @@ static size_t mei_txe_hbuf_max_len(const struct mei_device *dev) * * @dev: the device structure * - * returns always hbuf_depth + * Return: always hbuf_depth */ static int mei_txe_hbuf_empty_slots(struct mei_device *dev) { struct mei_txe_hw *hw = to_txe_hw(dev); + return hw->slots; } @@ -678,7 +761,7 @@ static int mei_txe_hbuf_empty_slots(struct mei_device *dev) * * @dev: the device structure * - * returns always buffer size in dwords count + * Return: always buffer size in dwords count */ static int mei_txe_count_full_read_slots(struct mei_device *dev) { @@ -691,7 +774,7 @@ static int mei_txe_count_full_read_slots(struct mei_device *dev) * * @dev: the device structure * - * returns mei message header + * Return: mei message header */ static u32 mei_txe_read_hdr(const struct mei_device *dev) @@ -705,33 +788,35 @@ static u32 mei_txe_read_hdr(const struct mei_device *dev) * @buf: message buffer will be written * @len: message size will be read * - * returns -EINVAL on error wrong argument and 0 on success + * Return: -EINVAL on error wrong argument and 0 on success */ static int mei_txe_read(struct mei_device *dev, unsigned char *buf, unsigned long len) { struct mei_txe_hw *hw = to_txe_hw(dev); + u32 *reg_buf, reg; + u32 rem; u32 i; - u32 *reg_buf = (u32 *)buf; - u32 rem = len & 0x3; if (WARN_ON(!buf || !len)) return -EINVAL; - dev_dbg(&dev->pdev->dev, - "buffer-length = %lu buf[0]0x%08X\n", + reg_buf = (u32 *)buf; + rem = len & 0x3; + + dev_dbg(dev->dev, "buffer-length = %lu buf[0]0x%08X\n", len, mei_txe_out_data_read(dev, 0)); for (i = 0; i < len / 4; i++) { /* skip header: index starts from 1 */ - u32 reg = mei_txe_out_data_read(dev, i + 1); - dev_dbg(&dev->pdev->dev, "buf[%d] = 0x%08X\n", i, reg); + reg = mei_txe_out_data_read(dev, i + 1); + dev_dbg(dev->dev, "buf[%d] = 0x%08X\n", i, reg); *reg_buf++ = reg; } if (rem) { - u32 reg = mei_txe_out_data_read(dev, i + 1); + reg = mei_txe_out_data_read(dev, i + 1); memcpy(reg_buf, ®, rem); } @@ -745,7 +830,7 @@ static int mei_txe_read(struct mei_device *dev, * @dev: the device structure * @intr_enable: if interrupt should be enabled after reset. * - * returns 0 on success and < 0 in case of error + * Return: 0 on success and < 0 in case of error */ static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable) { @@ -771,8 +856,7 @@ static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable) */ if (aliveness_req != hw->aliveness) if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) { - dev_err(&dev->pdev->dev, - "wait for aliveness settle failed ... bailing out\n"); + dev_err(dev->dev, "wait for aliveness settle failed ... bailing out\n"); return -EIO; } @@ -782,14 +866,13 @@ static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable) if (aliveness_req) { mei_txe_aliveness_set(dev, 0); if (mei_txe_aliveness_poll(dev, 0) < 0) { - dev_err(&dev->pdev->dev, - "wait for aliveness failed ... bailing out\n"); + dev_err(dev->dev, "wait for aliveness failed ... bailing out\n"); return -EIO; } } /* - * Set rediness RDY_CLR bit + * Set readiness RDY_CLR bit */ mei_txe_readiness_clear(dev); @@ -801,7 +884,7 @@ static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable) * * @dev: the device structure * - * returns 0 on success and < 0 in case of error + * Return: 0 on success an error code otherwise */ static int mei_txe_hw_start(struct mei_device *dev) { @@ -815,7 +898,7 @@ static int mei_txe_hw_start(struct mei_device *dev) ret = mei_txe_readiness_wait(dev); if (ret < 0) { - dev_err(&dev->pdev->dev, "wating for readiness failed\n"); + dev_err(dev->dev, "waiting for readiness failed\n"); return ret; } @@ -831,7 +914,7 @@ static int mei_txe_hw_start(struct mei_device *dev) ret = mei_txe_aliveness_set_sync(dev, 1); if (ret < 0) { - dev_err(&dev->pdev->dev, "wait for aliveness failed ... bailing out\n"); + dev_err(dev->dev, "wait for aliveness failed ... bailing out\n"); return ret; } @@ -857,6 +940,8 @@ static int mei_txe_hw_start(struct mei_device *dev) * * @dev: the device structure * @do_ack: acknowledge interrupts + * + * Return: true if found interrupts to process. */ static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack) { @@ -912,7 +997,8 @@ out: * @irq: The irq number * @dev_id: pointer to the device structure * - * returns irqreturn_t + * Return: IRQ_WAKE_THREAD if interrupt is designed for the device + * IRQ_NONE otherwise */ irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id) { @@ -930,8 +1016,7 @@ irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id) * @irq: The irq number * @dev_id: pointer to the device structure * - * returns irqreturn_t - * + * Return: IRQ_HANDLED */ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) { @@ -941,7 +1026,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) s32 slots; int rets = 0; - dev_dbg(&dev->pdev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n", + dev_dbg(dev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n", mei_txe_br_reg_read(hw, HHISR_REG), mei_txe_br_reg_read(hw, HISR_REG), mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG)); @@ -951,7 +1036,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) mutex_lock(&dev->device_lock); mei_io_list_init(&complete_list); - if (pci_dev_msi_enabled(dev->pdev)) + if (pci_dev_msi_enabled(to_pci_dev(dev->dev))) mei_txe_check_and_ack_intrs(dev, true); /* show irq events */ @@ -965,17 +1050,17 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) * or TXE driver resetting the HECI interface. */ if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) { - dev_dbg(&dev->pdev->dev, "Readiness Interrupt was received...\n"); + dev_dbg(dev->dev, "Readiness Interrupt was received...\n"); /* Check if SeC is going through reset */ if (mei_txe_readiness_is_sec_rdy(hw->readiness)) { - dev_dbg(&dev->pdev->dev, "we need to start the dev.\n"); + dev_dbg(dev->dev, "we need to start the dev.\n"); dev->recvd_hw_ready = true; } else { dev->recvd_hw_ready = false; if (dev->dev_state != MEI_DEV_RESETTING) { - dev_warn(&dev->pdev->dev, "FW not ready: resetting.\n"); + dev_warn(dev->dev, "FW not ready: resetting.\n"); schedule_work(&dev->reset_work); goto end; @@ -992,7 +1077,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) { /* Clear the interrupt cause */ - dev_dbg(&dev->pdev->dev, + dev_dbg(dev->dev, "Aliveness Interrupt: Status: %d\n", hw->aliveness); dev->pg_event = MEI_PG_EVENT_RECEIVED; if (waitqueue_active(&hw->wait_aliveness_resp)) @@ -1008,7 +1093,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) /* Read from TXE */ rets = mei_irq_read_handler(dev, &complete_list, &slots); if (rets && dev->dev_state != MEI_DEV_RESETTING) { - dev_err(&dev->pdev->dev, + dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n", rets); schedule_work(&dev->reset_work); @@ -1026,7 +1111,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) dev->hbuf_is_ready = mei_hbuf_is_ready(dev); rets = mei_irq_write_handler(dev, &complete_list); if (rets && rets != -EMSGSIZE) - dev_err(&dev->pdev->dev, "mei_irq_write_handler ret = %d.\n", + dev_err(dev->dev, "mei_irq_write_handler ret = %d.\n", rets); dev->hbuf_is_ready = mei_hbuf_is_ready(dev); } @@ -1034,7 +1119,7 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) mei_irq_compl_handler(dev, &complete_list); end: - dev_dbg(&dev->pdev->dev, "interrupt thread end ret = %d\n", rets); + dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets); mutex_unlock(&dev->device_lock); @@ -1046,6 +1131,7 @@ static const struct mei_hw_ops mei_txe_hw_ops = { .host_is_ready = mei_txe_host_is_ready, + .fw_status = mei_txe_fw_status, .pg_state = mei_txe_pg_state, .hw_is_ready = mei_txe_hw_is_ready, @@ -1072,27 +1158,14 @@ static const struct mei_hw_ops mei_txe_hw_ops = { }; -#define MEI_CFG_TXE_FW_STS \ - .fw_status.count = 2, \ - .fw_status.status[0] = PCI_CFG_TXE_FW_STS0, \ - .fw_status.status[1] = PCI_CFG_TXE_FW_STS1 - -const struct mei_cfg mei_txe_cfg = { - MEI_CFG_TXE_FW_STS, -}; - - /** * mei_txe_dev_init - allocates and initializes txe hardware specific structure * - * @pdev - pci device - * @cfg - per device generation config - * - * returns struct mei_device * on success or NULL; + * @pdev: pci device * + * Return: struct mei_device * on success or NULL */ -struct mei_device *mei_txe_dev_init(struct pci_dev *pdev, - const struct mei_cfg *cfg) +struct mei_device *mei_txe_dev_init(struct pci_dev *pdev) { struct mei_device *dev; struct mei_txe_hw *hw; @@ -1102,15 +1175,12 @@ struct mei_device *mei_txe_dev_init(struct pci_dev *pdev, if (!dev) return NULL; - mei_device_init(dev, cfg); + mei_device_init(dev, &pdev->dev, &mei_txe_hw_ops); hw = to_txe_hw(dev); init_waitqueue_head(&hw->wait_aliveness_resp); - dev->ops = &mei_txe_hw_ops; - - dev->pdev = pdev; return dev; } @@ -1120,6 +1190,8 @@ struct mei_device *mei_txe_dev_init(struct pci_dev *pdev, * @dev: the device structure * @addr: physical address start of the range * @range: physical range size + * + * Return: 0 on success an error code otherwise */ int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range) { @@ -1151,7 +1223,7 @@ int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range) mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range); mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32); mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl); - dev_dbg(&dev->pdev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n", + dev_dbg(dev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n", range, lo32, ctrl); return 0; |