diff options
Diffstat (limited to 'drivers/misc/mic/host/mic_x100.c')
| -rw-r--r-- | drivers/misc/mic/host/mic_x100.c | 570 |
1 files changed, 570 insertions, 0 deletions
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c new file mode 100644 index 000000000000..0dfa8a81436e --- /dev/null +++ b/drivers/misc/mic/host/mic_x100.c @@ -0,0 +1,570 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2013 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel MIC Host driver. + * + */ +#include <linux/fs.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/firmware.h> +#include <linux/delay.h> + +#include "../common/mic_dev.h" +#include "mic_device.h" +#include "mic_x100.h" +#include "mic_smpt.h" + +/** + * mic_x100_write_spad - write to the scratchpad register + * @mdev: pointer to mic_device instance + * @idx: index to the scratchpad register, 0 based + * @val: the data value to put into the register + * + * This function allows writing of a 32bit value to the indexed scratchpad + * register. + * + * RETURNS: none. + */ +static void +mic_x100_write_spad(struct mic_device *mdev, unsigned int idx, u32 val) +{ + dev_dbg(mdev->sdev->parent, "Writing 0x%x to scratch pad index %d\n", + val, idx); + mic_mmio_write(&mdev->mmio, val, + MIC_X100_SBOX_BASE_ADDRESS + + MIC_X100_SBOX_SPAD0 + idx * 4); +} + +/** + * mic_x100_read_spad - read from the scratchpad register + * @mdev: pointer to mic_device instance + * @idx: index to scratchpad register, 0 based + * + * This function allows reading of the 32bit scratchpad register. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +static u32 +mic_x100_read_spad(struct mic_device *mdev, unsigned int idx) +{ + u32 val = mic_mmio_read(&mdev->mmio, + MIC_X100_SBOX_BASE_ADDRESS + + MIC_X100_SBOX_SPAD0 + idx * 4); + + dev_dbg(mdev->sdev->parent, + "Reading 0x%x from scratch pad index %d\n", val, idx); + return val; +} + +/** + * mic_x100_enable_interrupts - Enable interrupts. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_enable_interrupts(struct mic_device *mdev) +{ + u32 reg; + struct mic_mw *mw = &mdev->mmio; + u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0; + u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0; + + reg = mic_mmio_read(mw, sice0); + reg |= MIC_X100_SBOX_DBR_BITS(0xf) | MIC_X100_SBOX_DMA_BITS(0xff); + mic_mmio_write(mw, reg, sice0); + + /* + * Enable auto-clear when enabling interrupts. Applicable only for + * MSI-x. Legacy and MSI mode cannot have auto-clear enabled. + */ + if (mdev->irq_info.num_vectors > 1) { + reg = mic_mmio_read(mw, siac0); + reg |= MIC_X100_SBOX_DBR_BITS(0xf) | + MIC_X100_SBOX_DMA_BITS(0xff); + mic_mmio_write(mw, reg, siac0); + } +} + +/** + * mic_x100_disable_interrupts - Disable interrupts. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_disable_interrupts(struct mic_device *mdev) +{ + u32 reg; + struct mic_mw *mw = &mdev->mmio; + u32 sice0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICE0; + u32 siac0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SIAC0; + u32 sicc0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICC0; + + reg = mic_mmio_read(mw, sice0); + mic_mmio_write(mw, reg, sicc0); + + if (mdev->irq_info.num_vectors > 1) { + reg = mic_mmio_read(mw, siac0); + reg &= ~(MIC_X100_SBOX_DBR_BITS(0xf) | + MIC_X100_SBOX_DMA_BITS(0xff)); + mic_mmio_write(mw, reg, siac0); + } +} + +/** + * mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_send_sbox_intr(struct mic_device *mdev, + int doorbell) +{ + struct mic_mw *mw = &mdev->mmio; + u64 apic_icr_offset = MIC_X100_SBOX_APICICR0 + doorbell * 8; + u32 apicicr_low = mic_mmio_read(mw, MIC_X100_SBOX_BASE_ADDRESS + + apic_icr_offset); + + /* for MIC we need to make sure we "hit" the send_icr bit (13) */ + apicicr_low = (apicicr_low | (1 << 13)); + + /* Ensure that the interrupt is ordered w.r.t. previous stores. */ + wmb(); + mic_mmio_write(mw, apicicr_low, + MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset); +} + +/** + * mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_send_rdmasr_intr(struct mic_device *mdev, + int doorbell) +{ + int rdmasr_offset = MIC_X100_SBOX_RDMASR0 + (doorbell << 2); + /* Ensure that the interrupt is ordered w.r.t. previous stores. */ + wmb(); + mic_mmio_write(&mdev->mmio, 0, + MIC_X100_SBOX_BASE_ADDRESS + rdmasr_offset); +} + +/** + * __mic_x100_send_intr - Send interrupt to MIC. + * @mdev: pointer to mic_device instance + * @doorbell: doorbell number. + */ +static void mic_x100_send_intr(struct mic_device *mdev, int doorbell) +{ + int rdmasr_db; + if (doorbell < MIC_X100_NUM_SBOX_IRQ) { + mic_x100_send_sbox_intr(mdev, doorbell); + } else { + rdmasr_db = doorbell - MIC_X100_NUM_SBOX_IRQ + + MIC_X100_RDMASR_IRQ_BASE; + mic_x100_send_rdmasr_intr(mdev, rdmasr_db); + } +} + +/** + * mic_ack_interrupt - Device specific interrupt handling. + * @mdev: pointer to mic_device instance + * + * Returns: bitmask of doorbell events triggered. + */ +static u32 mic_x100_ack_interrupt(struct mic_device *mdev) +{ + u32 reg = 0; + struct mic_mw *mw = &mdev->mmio; + u32 sicr0 = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_SICR0; + + /* Clear pending bit array. */ + if (MIC_A0_STEP == mdev->stepping) + mic_mmio_write(mw, 1, MIC_X100_SBOX_BASE_ADDRESS + + MIC_X100_SBOX_MSIXPBACR); + + if (mdev->irq_info.num_vectors <= 1) { + reg = mic_mmio_read(mw, sicr0); + + if (unlikely(!reg)) + goto done; + + mic_mmio_write(mw, reg, sicr0); + } + + if (mdev->stepping >= MIC_B0_STEP) + mdev->intr_ops->enable_interrupts(mdev); +done: + return reg; +} + +/** + * mic_x100_hw_intr_init - Initialize h/w specific interrupt + * information. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_hw_intr_init(struct mic_device *mdev) +{ + mdev->intr_info = (struct mic_intr_info *)mic_x100_intr_init; +} + +/** + * mic_x100_read_msi_to_src_map - read from the MSI mapping registers + * @mdev: pointer to mic_device instance + * @idx: index to the mapping register, 0 based + * + * This function allows reading of the 32bit MSI mapping register. + * + * RETURNS: The value in the register. + */ +static u32 +mic_x100_read_msi_to_src_map(struct mic_device *mdev, int idx) +{ + return mic_mmio_read(&mdev->mmio, + MIC_X100_SBOX_BASE_ADDRESS + + MIC_X100_SBOX_MXAR0 + idx * 4); +} + +/** + * mic_x100_program_msi_to_src_map - program the MSI mapping registers + * @mdev: pointer to mic_device instance + * @idx: index to the mapping register, 0 based + * @offset: The bit offset in the register that needs to be updated. + * @set: boolean specifying if the bit in the specified offset needs + * to be set or cleared. + * + * RETURNS: None. + */ +static void +mic_x100_program_msi_to_src_map(struct mic_device *mdev, + int idx, int offset, bool set) +{ + unsigned long reg; + struct mic_mw *mw = &mdev->mmio; + u32 mxar = MIC_X100_SBOX_BASE_ADDRESS + + MIC_X100_SBOX_MXAR0 + idx * 4; + + reg = mic_mmio_read(mw, mxar); + if (set) + __set_bit(offset, ®); + else + __clear_bit(offset, ®); + mic_mmio_write(mw, reg, mxar); +} + +/* + * mic_x100_reset_fw_ready - Reset Firmware ready status field. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_reset_fw_ready(struct mic_device *mdev) +{ + mdev->ops->write_spad(mdev, MIC_X100_DOWNLOAD_INFO, 0); +} + +/* + * mic_x100_is_fw_ready - Check if firmware is ready. + * @mdev: pointer to mic_device instance + */ +static bool mic_x100_is_fw_ready(struct mic_device *mdev) +{ + u32 scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); + return MIC_X100_SPAD2_DOWNLOAD_STATUS(scratch2) ? true : false; +} + +/** + * mic_x100_get_apic_id - Get bootstrap APIC ID. + * @mdev: pointer to mic_device instance + */ +static u32 mic_x100_get_apic_id(struct mic_device *mdev) +{ + u32 scratch2 = 0; + + scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); + return MIC_X100_SPAD2_APIC_ID(scratch2); +} + +/** + * mic_x100_send_firmware_intr - Send an interrupt to the firmware on MIC. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_send_firmware_intr(struct mic_device *mdev) +{ + u32 apicicr_low; + u64 apic_icr_offset = MIC_X100_SBOX_APICICR7; + int vector = MIC_X100_BSP_INTERRUPT_VECTOR; + struct mic_mw *mw = &mdev->mmio; + + /* + * For MIC we need to make sure we "hit" + * the send_icr bit (13). + */ + apicicr_low = (vector | (1 << 13)); + + mic_mmio_write(mw, mic_x100_get_apic_id(mdev), + MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset + 4); + + /* Ensure that the interrupt is ordered w.r.t. previous stores. */ + wmb(); + mic_mmio_write(mw, apicicr_low, + MIC_X100_SBOX_BASE_ADDRESS + apic_icr_offset); +} + +/** + * mic_x100_hw_reset - Reset the MIC device. + * @mdev: pointer to mic_device instance + */ +static void mic_x100_hw_reset(struct mic_device *mdev) +{ + u32 reset_reg; + u32 rgcr = MIC_X100_SBOX_BASE_ADDRESS + MIC_X100_SBOX_RGCR; + struct mic_mw *mw = &mdev->mmio; + + /* Ensure that the reset is ordered w.r.t. previous loads and stores */ + mb(); + /* Trigger reset */ + reset_reg = mic_mmio_read(mw, rgcr); + reset_reg |= 0x1; + mic_mmio_write(mw, reset_reg, rgcr); + /* + * It seems we really want to delay at least 1 second + * after touching reset to prevent a lot of problems. + */ + msleep(1000); +} + +/** + * mic_x100_load_command_line - Load command line to MIC. + * @mdev: pointer to mic_device instance + * @fw: the firmware image + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +static int +mic_x100_load_command_line(struct mic_device *mdev, const struct firmware *fw) +{ + u32 len = 0; + u32 boot_mem; + char *buf; + void __iomem *cmd_line_va = mdev->aper.va + mdev->bootaddr + fw->size; +#define CMDLINE_SIZE 2048 + + boot_mem = mdev->aper.len >> 20; + buf = kzalloc(CMDLINE_SIZE, GFP_KERNEL); + if (!buf) { + dev_err(mdev->sdev->parent, + "%s %d allocation failed\n", __func__, __LINE__); + return -ENOMEM; + } + len += snprintf(buf, CMDLINE_SIZE - len, + " mem=%dM", boot_mem); + if (mdev->cmdline) + snprintf(buf + len, CMDLINE_SIZE - len, " %s", mdev->cmdline); + memcpy_toio(cmd_line_va, buf, strlen(buf) + 1); + kfree(buf); + return 0; +} + +/** + * mic_x100_load_ramdisk - Load ramdisk to MIC. + * @mdev: pointer to mic_device instance + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +static int +mic_x100_load_ramdisk(struct mic_device *mdev) +{ + const struct firmware *fw; + int rc; + struct boot_params __iomem *bp = mdev->aper.va + mdev->bootaddr; + + rc = request_firmware(&fw, + mdev->ramdisk, mdev->sdev->parent); + if (rc < 0) { + dev_err(mdev->sdev->parent, + "ramdisk request_firmware failed: %d %s\n", + rc, mdev->ramdisk); + goto error; + } + /* + * Typically the bootaddr for card OS is 64M + * so copy over the ramdisk @ 128M. + */ + memcpy_toio(mdev->aper.va + (mdev->bootaddr << 1), fw->data, fw->size); + iowrite32(mdev->bootaddr << 1, &bp->hdr.ramdisk_image); + iowrite32(fw->size, &bp->hdr.ramdisk_size); + release_firmware(fw); +error: + return rc; +} + +/** + * mic_x100_get_boot_addr - Get MIC boot address. + * @mdev: pointer to mic_device instance + * + * This function is called during firmware load to determine + * the address at which the OS should be downloaded in card + * memory i.e. GDDR. + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +static int +mic_x100_get_boot_addr(struct mic_device *mdev) +{ + u32 scratch2, boot_addr; + int rc = 0; + + scratch2 = mdev->ops->read_spad(mdev, MIC_X100_DOWNLOAD_INFO); + boot_addr = MIC_X100_SPAD2_DOWNLOAD_ADDR(scratch2); + dev_dbg(mdev->sdev->parent, "%s %d boot_addr 0x%x\n", + __func__, __LINE__, boot_addr); + if (boot_addr > (1 << 31)) { + dev_err(mdev->sdev->parent, + "incorrect bootaddr 0x%x\n", + boot_addr); + rc = -EINVAL; + goto error; + } + mdev->bootaddr = boot_addr; +error: + return rc; +} + +/** + * mic_x100_load_firmware - Load firmware to MIC. + * @mdev: pointer to mic_device instance + * @buf: buffer containing boot string including firmware/ramdisk path. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +static int +mic_x100_load_firmware(struct mic_device *mdev, const char *buf) +{ + int rc; + const struct firmware *fw; + + rc = mic_x100_get_boot_addr(mdev); + if (rc) + goto error; + /* load OS */ + rc = request_firmware(&fw, mdev->firmware, mdev->sdev->parent); + if (rc < 0) { + dev_err(mdev->sdev->parent, + "ramdisk request_firmware failed: %d %s\n", + rc, mdev->firmware); + goto error; + } + if (mdev->bootaddr > mdev->aper.len - fw->size) { + rc = -EINVAL; + dev_err(mdev->sdev->parent, "%s %d rc %d bootaddr 0x%x\n", + __func__, __LINE__, rc, mdev->bootaddr); + release_firmware(fw); + goto error; + } + memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size); + mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size); + if (!strcmp(mdev->bootmode, "elf")) + goto done; + /* load command line */ + rc = mic_x100_load_command_line(mdev, fw); + if (rc) { + dev_err(mdev->sdev->parent, "%s %d rc %d\n", + __func__, __LINE__, rc); + goto error; + } + release_firmware(fw); + /* load ramdisk */ + if (mdev->ramdisk) + rc = mic_x100_load_ramdisk(mdev); +error: + dev_dbg(mdev->sdev->parent, "%s %d rc %d\n", __func__, __LINE__, rc); +done: + return rc; +} + +/** + * mic_x100_get_postcode - Get postcode status from firmware. + * @mdev: pointer to mic_device instance + * + * RETURNS: postcode. + */ +static u32 mic_x100_get_postcode(struct mic_device *mdev) +{ + return mic_mmio_read(&mdev->mmio, MIC_X100_POSTCODE); +} + +/** + * mic_x100_smpt_set - Update an SMPT entry with a DMA address. + * @mdev: pointer to mic_device instance + * + * RETURNS: none. + */ +static void +mic_x100_smpt_set(struct mic_device *mdev, dma_addr_t dma_addr, u8 index) +{ +#define SNOOP_ON (0 << 0) +#define SNOOP_OFF (1 << 0) +/* + * Sbox Smpt Reg Bits: + * Bits 31:2 Host address + * Bits 1 RSVD + * Bits 0 No snoop + */ +#define BUILD_SMPT(NO_SNOOP, HOST_ADDR) \ + (u32)(((HOST_ADDR) << 2) | ((NO_SNOOP) & 0x01)) + + uint32_t smpt_reg_val = BUILD_SMPT(SNOOP_ON, + dma_addr >> mdev->smpt->info.page_shift); + mic_mmio_write(&mdev->mmio, smpt_reg_val, + MIC_X100_SBOX_BASE_ADDRESS + + MIC_X100_SBOX_SMPT00 + (4 * index)); +} + +/** + * mic_x100_smpt_hw_init - Initialize SMPT X100 specific fields. + * @mdev: pointer to mic_device instance + * + * RETURNS: none. + */ +static void mic_x100_smpt_hw_init(struct mic_device *mdev) +{ + struct mic_smpt_hw_info *info = &mdev->smpt->info; + + info->num_reg = 32; + info->page_shift = 34; + info->page_size = (1ULL << info->page_shift); + info->base = 0x8000000000ULL; +} + +struct mic_smpt_ops mic_x100_smpt_ops = { + .init = mic_x100_smpt_hw_init, + .set = mic_x100_smpt_set, +}; + +struct mic_hw_ops mic_x100_ops = { + .aper_bar = MIC_X100_APER_BAR, + .mmio_bar = MIC_X100_MMIO_BAR, + .read_spad = mic_x100_read_spad, + .write_spad = mic_x100_write_spad, + .send_intr = mic_x100_send_intr, + .ack_interrupt = mic_x100_ack_interrupt, + .reset = mic_x100_hw_reset, + .reset_fw_ready = mic_x100_reset_fw_ready, + .is_fw_ready = mic_x100_is_fw_ready, + .send_firmware_intr = mic_x100_send_firmware_intr, + .load_mic_fw = mic_x100_load_firmware, + .get_postcode = mic_x100_get_postcode, +}; + +struct mic_hw_intr_ops mic_x100_intr_ops = { + .intr_init = mic_x100_hw_intr_init, + .enable_interrupts = mic_x100_enable_interrupts, + .disable_interrupts = mic_x100_disable_interrupts, + .program_msi_to_src_map = mic_x100_program_msi_to_src_map, + .read_msi_to_src_map = mic_x100_read_msi_to_src_map, +}; |