diff options
Diffstat (limited to 'drivers/mmc/core/sdio_io.c')
| -rw-r--r-- | drivers/mmc/core/sdio_io.c | 548 |
1 files changed, 548 insertions, 0 deletions
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c new file mode 100644 index 000000000000..625b92ce9cef --- /dev/null +++ b/drivers/mmc/core/sdio_io.c @@ -0,0 +1,548 @@ +/* + * linux/drivers/mmc/core/sdio_io.c + * + * Copyright 2007 Pierre Ossman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_func.h> + +#include "sdio_ops.h" + +/** + * sdio_claim_host - exclusively claim a bus for a certain SDIO function + * @func: SDIO function that will be accessed + * + * Claim a bus for a set of operations. The SDIO function given + * is used to figure out which bus is relevant. + */ +void sdio_claim_host(struct sdio_func *func) +{ + BUG_ON(!func); + BUG_ON(!func->card); + + mmc_claim_host(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_claim_host); + +/** + * sdio_release_host - release a bus for a certain SDIO function + * @func: SDIO function that was accessed + * + * Release a bus, allowing others to claim the bus for their + * operations. + */ +void sdio_release_host(struct sdio_func *func) +{ + BUG_ON(!func); + BUG_ON(!func->card); + + mmc_release_host(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_release_host); + +/** + * sdio_enable_func - enables a SDIO function for usage + * @func: SDIO function to enable + * + * Powers up and activates a SDIO function so that register + * access is possible. + */ +int sdio_enable_func(struct sdio_func *func) +{ + int ret; + unsigned char reg; + unsigned long timeout; + + BUG_ON(!func); + BUG_ON(!func->card); + + pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func)); + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®); + if (ret) + goto err; + + reg |= 1 << func->num; + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL); + if (ret) + goto err; + + /* + * FIXME: This should timeout based on information in the CIS, + * but we don't have card to parse that yet. + */ + timeout = jiffies + HZ; + + while (1) { + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®); + if (ret) + goto err; + if (reg & (1 << func->num)) + break; + ret = -ETIME; + if (time_after(jiffies, timeout)) + goto err; + } + + pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func)); + + return 0; + +err: + pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func)); + return ret; +} +EXPORT_SYMBOL_GPL(sdio_enable_func); + +/** + * sdio_disable_func - disable a SDIO function + * @func: SDIO function to disable + * + * Powers down and deactivates a SDIO function. Register access + * to this function will fail until the function is reenabled. + */ +int sdio_disable_func(struct sdio_func *func) +{ + int ret; + unsigned char reg; + + BUG_ON(!func); + BUG_ON(!func->card); + + pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func)); + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®); + if (ret) + goto err; + + reg &= ~(1 << func->num); + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL); + if (ret) + goto err; + + pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func)); + + return 0; + +err: + pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func)); + return -EIO; +} +EXPORT_SYMBOL_GPL(sdio_disable_func); + +/** + * sdio_set_block_size - set the block size of an SDIO function + * @func: SDIO function to change + * @blksz: new block size or 0 to use the default. + * + * The default block size is the largest supported by both the function + * and the host, with a maximum of 512 to ensure that arbitrarily sized + * data transfer use the optimal (least) number of commands. + * + * A driver may call this to override the default block size set by the + * core. This can be used to set a block size greater than the maximum + * that reported by the card; it is the driver's responsibility to ensure + * it uses a value that the card supports. + * + * Returns 0 on success, -EINVAL if the host does not support the + * requested block size, or -EIO (etc.) if one of the resultant FBR block + * size register writes failed. + * + */ +int sdio_set_block_size(struct sdio_func *func, unsigned blksz) +{ + int ret; + + if (blksz > func->card->host->max_blk_size) + return -EINVAL; + + if (blksz == 0) { + blksz = min(min( + func->max_blksize, + func->card->host->max_blk_size), + 512u); + } + + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE, + blksz & 0xff, NULL); + if (ret) + return ret; + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1, + (blksz >> 8) & 0xff, NULL); + if (ret) + return ret; + func->cur_blksize = blksz; + return 0; +} + +EXPORT_SYMBOL_GPL(sdio_set_block_size); + +/* Split an arbitrarily sized data transfer into several + * IO_RW_EXTENDED commands. */ +static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, + unsigned addr, int incr_addr, u8 *buf, unsigned size) +{ + unsigned remainder = size; + unsigned max_blocks; + int ret; + + /* Do the bulk of the transfer using block mode (if supported). */ + if (func->card->cccr.multi_block) { + /* Blocks per command is limited by host count, host transfer + * size (we only use a single sg entry) and the maximum for + * IO_RW_EXTENDED of 511 blocks. */ + max_blocks = min(min( + func->card->host->max_blk_count, + func->card->host->max_seg_size / func->cur_blksize), + 511u); + + while (remainder > func->cur_blksize) { + unsigned blocks; + + blocks = remainder / func->cur_blksize; + if (blocks > max_blocks) + blocks = max_blocks; + size = blocks * func->cur_blksize; + + ret = mmc_io_rw_extended(func->card, write, + func->num, addr, incr_addr, buf, + blocks, func->cur_blksize); + if (ret) + return ret; + + remainder -= size; + buf += size; + if (incr_addr) + addr += size; + } + } + + /* Write the remainder using byte mode. */ + while (remainder > 0) { + size = remainder; + if (size > func->cur_blksize) + size = func->cur_blksize; + if (size > 512) + size = 512; /* maximum size for byte mode */ + + ret = mmc_io_rw_extended(func->card, write, func->num, addr, + incr_addr, buf, 1, size); + if (ret) + return ret; + + remainder -= size; + buf += size; + if (incr_addr) + addr += size; + } + return 0; +} + +/** + * sdio_readb - read a single byte from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a single byte from the address space of a given SDIO + * function. If there is a problem reading the address, 0xff + * is returned and @err_ret will contain the error code. + */ +unsigned char sdio_readb(struct sdio_func *func, unsigned int addr, + int *err_ret) +{ + int ret; + unsigned char val; + + BUG_ON(!func); + + if (err_ret) + *err_ret = 0; + + ret = mmc_io_rw_direct(func->card, 0, func->num, addr, 0, &val); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFF; + } + + return val; +} +EXPORT_SYMBOL_GPL(sdio_readb); + +/** + * sdio_writeb - write a single byte to a SDIO function + * @func: SDIO function to access + * @b: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a single byte to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, + int *err_ret) +{ + int ret; + + BUG_ON(!func); + + ret = mmc_io_rw_direct(func->card, 1, func->num, addr, b, NULL); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writeb); + +/** + * sdio_memcpy_fromio - read a chunk of memory from a SDIO function + * @func: SDIO function to access + * @dst: buffer to store the data + * @addr: address to begin reading from + * @count: number of bytes to read + * + * Reads from the address space of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_memcpy_fromio(struct sdio_func *func, void *dst, + unsigned int addr, int count) +{ + return sdio_io_rw_ext_helper(func, 0, addr, 1, dst, count); +} +EXPORT_SYMBOL_GPL(sdio_memcpy_fromio); + +/** + * sdio_memcpy_toio - write a chunk of memory to a SDIO function + * @func: SDIO function to access + * @addr: address to start writing to + * @src: buffer that contains the data to write + * @count: number of bytes to write + * + * Writes to the address space of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr, + void *src, int count) +{ + return sdio_io_rw_ext_helper(func, 1, addr, 1, src, count); +} +EXPORT_SYMBOL_GPL(sdio_memcpy_toio); + +/** + * sdio_readsb - read from a FIFO on a SDIO function + * @func: SDIO function to access + * @dst: buffer to store the data + * @addr: address of (single byte) FIFO + * @count: number of bytes to read + * + * Reads from the specified FIFO of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr, + int count) +{ + return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count); +} + +EXPORT_SYMBOL_GPL(sdio_readsb); + +/** + * sdio_writesb - write to a FIFO of a SDIO function + * @func: SDIO function to access + * @addr: address of (single byte) FIFO + * @src: buffer that contains the data to write + * @count: number of bytes to write + * + * Writes to the specified FIFO of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src, + int count) +{ + return sdio_io_rw_ext_helper(func, 1, addr, 0, src, count); +} +EXPORT_SYMBOL_GPL(sdio_writesb); + +/** + * sdio_readw - read a 16 bit integer from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a 16 bit integer from the address space of a given SDIO + * function. If there is a problem reading the address, 0xffff + * is returned and @err_ret will contain the error code. + */ +unsigned short sdio_readw(struct sdio_func *func, unsigned int addr, + int *err_ret) +{ + int ret; + + if (err_ret) + *err_ret = 0; + + ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 2); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFFFF; + } + + return le16_to_cpu(*(u16*)func->tmpbuf); +} +EXPORT_SYMBOL_GPL(sdio_readw); + +/** + * sdio_writew - write a 16 bit integer to a SDIO function + * @func: SDIO function to access + * @b: integer to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a 16 bit integer to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr, + int *err_ret) +{ + int ret; + + *(u16*)func->tmpbuf = cpu_to_le16(b); + + ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writew); + +/** + * sdio_readl - read a 32 bit integer from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a 32 bit integer from the address space of a given SDIO + * function. If there is a problem reading the address, + * 0xffffffff is returned and @err_ret will contain the error + * code. + */ +unsigned long sdio_readl(struct sdio_func *func, unsigned int addr, + int *err_ret) +{ + int ret; + + if (err_ret) + *err_ret = 0; + + ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 4); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFFFFFFFF; + } + + return le32_to_cpu(*(u32*)func->tmpbuf); +} +EXPORT_SYMBOL_GPL(sdio_readl); + +/** + * sdio_writel - write a 32 bit integer to a SDIO function + * @func: SDIO function to access + * @b: integer to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a 32 bit integer to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr, + int *err_ret) +{ + int ret; + + *(u32*)func->tmpbuf = cpu_to_le32(b); + + ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writel); + +/** + * sdio_f0_readb - read a single byte from SDIO function 0 + * @func: an SDIO function of the card + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a single byte from the address space of SDIO function 0. + * If there is a problem reading the address, 0xff is returned + * and @err_ret will contain the error code. + */ +unsigned char sdio_f0_readb(struct sdio_func *func, unsigned int addr, + int *err_ret) +{ + int ret; + unsigned char val; + + BUG_ON(!func); + + if (err_ret) + *err_ret = 0; + + ret = mmc_io_rw_direct(func->card, 0, 0, addr, 0, &val); + if (ret) { + if (err_ret) + *err_ret = ret; + return 0xFF; + } + + return val; +} +EXPORT_SYMBOL_GPL(sdio_f0_readb); + +/** + * sdio_f0_writeb - write a single byte to SDIO function 0 + * @func: an SDIO function of the card + * @b: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a single byte to the address space of SDIO function 0. + * @err_ret will contain the status of the actual transfer. + * + * Only writes to the vendor specific CCCR registers (0xF0 - + * 0xFF) are permiited; @err_ret will be set to -EINVAL for * + * writes outside this range. + */ +void sdio_f0_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, + int *err_ret) +{ + int ret; + + BUG_ON(!func); + + if (addr < 0xF0 || addr > 0xFF) { + if (err_ret) + *err_ret = -EINVAL; + return; + } + + ret = mmc_io_rw_direct(func->card, 1, 0, addr, b, NULL); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_f0_writeb); |