diff options
Diffstat (limited to 'drivers/mmc/core')
| -rw-r--r-- | drivers/mmc/core/block.c | 6 | ||||
| -rw-r--r-- | drivers/mmc/core/core.c | 10 | ||||
| -rw-r--r-- | drivers/mmc/core/host.c | 33 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc_ops.c | 34 | ||||
| -rw-r--r-- | drivers/mmc/core/slot-gpio.c | 31 |
5 files changed, 47 insertions, 67 deletions
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 95b41c0891d0..663d87924e5e 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1107,7 +1107,7 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) card->erase_arg == MMC_TRIM_ARG ? INAND_CMD38_ARG_TRIM : INAND_CMD38_ARG_ERASE, - 0); + card->ext_csd.generic_cmd6_time); } if (!err) err = mmc_erase(card, from, nr, card->erase_arg); @@ -1149,7 +1149,7 @@ retry: arg == MMC_SECURE_TRIM1_ARG ? INAND_CMD38_ARG_SECTRIM1 : INAND_CMD38_ARG_SECERASE, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; } @@ -1167,7 +1167,7 @@ retry: err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, INAND_CMD38_ARG_EXT_CSD, INAND_CMD38_ARG_SECTRIM2, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index abf8f5eb0a1c..aa54d359dab7 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2330,7 +2330,13 @@ void mmc_rescan(struct work_struct *work) } for (i = 0; i < ARRAY_SIZE(freqs); i++) { - if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) + unsigned int freq = freqs[i]; + if (freq > host->f_max) { + if (i + 1 < ARRAY_SIZE(freqs)) + continue; + freq = host->f_max; + } + if (!mmc_rescan_try_freq(host, max(freq, host->f_min))) break; if (freqs[i] <= host->f_min) break; @@ -2344,7 +2350,7 @@ void mmc_rescan(struct work_struct *work) void mmc_start_host(struct mmc_host *host) { - host->f_init = max(freqs[0], host->f_min); + host->f_init = max(min(freqs[0], host->f_max), host->f_min); host->rescan_disable = 0; host->ios.power_mode = MMC_POWER_UNDEFINED; diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 105b7a7c0251..c8768726d925 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -175,8 +175,6 @@ int mmc_of_parse(struct mmc_host *host) struct device *dev = host->parent; u32 bus_width, drv_type, cd_debounce_delay_ms; int ret; - bool cd_cap_invert, cd_gpio_invert = false; - bool ro_cap_invert, ro_gpio_invert = false; if (!dev || !dev_fwnode(dev)) return 0; @@ -219,10 +217,12 @@ int mmc_of_parse(struct mmc_host *host) */ /* Parse Card Detection */ + if (device_property_read_bool(dev, "non-removable")) { host->caps |= MMC_CAP_NONREMOVABLE; } else { - cd_cap_invert = device_property_read_bool(dev, "cd-inverted"); + if (device_property_read_bool(dev, "cd-inverted")) + host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; if (device_property_read_u32(dev, "cd-debounce-delay-ms", &cd_debounce_delay_ms)) @@ -232,32 +232,19 @@ int mmc_of_parse(struct mmc_host *host) host->caps |= MMC_CAP_NEEDS_POLL; ret = mmc_gpiod_request_cd(host, "cd", 0, false, - cd_debounce_delay_ms * 1000, - &cd_gpio_invert); + cd_debounce_delay_ms * 1000); if (!ret) dev_info(host->parent, "Got CD GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) return ret; - - /* - * There are two ways to flag that the CD line is inverted: - * through the cd-inverted flag and by the GPIO line itself - * being inverted from the GPIO subsystem. This is a leftover - * from the times when the GPIO subsystem did not make it - * possible to flag a line as inverted. - * - * If the capability on the host AND the GPIO line are - * both inverted, the end result is that the CD line is - * not inverted. - */ - if (cd_cap_invert ^ cd_gpio_invert) - host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; } /* Parse Write Protection */ - ro_cap_invert = device_property_read_bool(dev, "wp-inverted"); - ret = mmc_gpiod_request_ro(host, "wp", 0, 0, &ro_gpio_invert); + if (device_property_read_bool(dev, "wp-inverted")) + host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + ret = mmc_gpiod_request_ro(host, "wp", 0, 0); if (!ret) dev_info(host->parent, "Got WP GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) @@ -266,10 +253,6 @@ int mmc_of_parse(struct mmc_host *host) if (device_property_read_bool(dev, "disable-wp")) host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; - /* See the comment on CD inversion above */ - if (ro_cap_invert ^ ro_gpio_invert) - host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - if (device_property_read_bool(dev, "cap-sd-highspeed")) host->caps |= MMC_CAP_SD_HIGHSPEED; if (device_property_read_bool(dev, "cap-mmc-highspeed")) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 09113b9ad679..da425ee2d9bf 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -19,7 +19,9 @@ #include "host.h" #include "mmc_ops.h" -#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ +#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10min*/ +#define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */ +#define MMC_CACHE_FLUSH_TIMEOUT_MS (30 * 1000) /* 30s */ static const u8 tuning_blk_pattern_4bit[] = { 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, @@ -458,10 +460,6 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, bool expired = false; bool busy = false; - /* We have an unspecified cmd timeout, use the fallback value. */ - if (!timeout_ms) - timeout_ms = MMC_OPS_TIMEOUT_MS; - /* * In cases when not allowed to poll by using CMD13 or because we aren't * capable of polling by using ->card_busy(), then rely on waiting the @@ -534,14 +532,19 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, mmc_retune_hold(host); + if (!timeout_ms) { + pr_warn("%s: unspecified timeout for CMD6 - use generic\n", + mmc_hostname(host)); + timeout_ms = card->ext_csd.generic_cmd6_time; + } + /* - * If the cmd timeout and the max_busy_timeout of the host are both - * specified, let's validate them. A failure means we need to prevent - * the host from doing hw busy detection, which is done by converting - * to a R1 response instead of a R1B. + * If the max_busy_timeout of the host is specified, make sure it's + * enough to fit the used timeout_ms. In case it's not, let's instruct + * the host to avoid HW busy detection, by converting to a R1 response + * instead of a R1B. */ - if (timeout_ms && host->max_busy_timeout && - (timeout_ms > host->max_busy_timeout)) + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) use_r1b_resp = false; cmd.opcode = MMC_SWITCH; @@ -552,10 +555,6 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, cmd.flags = MMC_CMD_AC; if (use_r1b_resp) { cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B; - /* - * A busy_timeout of zero means the host can decide to use - * whatever value it finds suitable. - */ cmd.busy_timeout = timeout_ms; } else { cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1; @@ -941,7 +940,7 @@ void mmc_run_bkops(struct mmc_card *card) * urgent levels by using an asynchronous background task, when idle. */ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BKOPS_START, 1, MMC_OPS_TIMEOUT_MS); + EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS); if (err) pr_warn("%s: Error %d starting bkops\n", mmc_hostname(card->host), err); @@ -961,7 +960,8 @@ int mmc_flush_cache(struct mmc_card *card) (card->ext_csd.cache_size > 0) && (card->ext_csd.cache_ctrl & 1)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_FLUSH_CACHE, 1, 0); + EXT_CSD_FLUSH_CACHE, 1, + MMC_CACHE_FLUSH_TIMEOUT_MS); if (err) pr_err("%s: cache flush error %d\n", mmc_hostname(card->host), err); diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index da2596c5fa28..05e907451df9 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -19,7 +19,6 @@ struct mmc_gpio { struct gpio_desc *ro_gpio; struct gpio_desc *cd_gpio; - bool override_cd_active_level; irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); char *ro_label; char *cd_label; @@ -80,13 +79,6 @@ int mmc_gpio_get_cd(struct mmc_host *host) return -ENOSYS; cansleep = gpiod_cansleep(ctx->cd_gpio); - if (ctx->override_cd_active_level) { - int value = cansleep ? - gpiod_get_raw_value_cansleep(ctx->cd_gpio) : - gpiod_get_raw_value(ctx->cd_gpio); - return !value ^ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); - } - return cansleep ? gpiod_get_value_cansleep(ctx->cd_gpio) : gpiod_get_value(ctx->cd_gpio); @@ -168,8 +160,6 @@ EXPORT_SYMBOL(mmc_gpio_set_cd_isr); * @idx: index of the GPIO to obtain in the consumer * @override_active_level: ignore %GPIO_ACTIVE_LOW flag * @debounce: debounce time in microseconds - * @gpio_invert: will return whether the GPIO line is inverted or not, set - * to NULL to ignore * * Note that this must be called prior to mmc_add_host() * otherwise the caller must also call mmc_gpiod_request_cd_irq(). @@ -178,7 +168,7 @@ EXPORT_SYMBOL(mmc_gpio_set_cd_isr); */ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, - unsigned int debounce, bool *gpio_invert) + unsigned int debounce) { struct mmc_gpio *ctx = host->slot.handler_priv; struct gpio_desc *desc; @@ -194,10 +184,14 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, ctx->cd_debounce_delay_ms = debounce / 1000; } - if (gpio_invert) - *gpio_invert = !gpiod_is_active_low(desc); + /* override forces default (active-low) polarity ... */ + if (override_active_level && !gpiod_is_active_low(desc)) + gpiod_toggle_active_low(desc); + + /* ... or active-high */ + if (host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); - ctx->override_cd_active_level = override_active_level; ctx->cd_gpio = desc; return 0; @@ -218,14 +212,11 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); * @con_id: function within the GPIO consumer * @idx: index of the GPIO to obtain in the consumer * @debounce: debounce time in microseconds - * @gpio_invert: will return whether the GPIO line is inverted or not, - * set to NULL to ignore * * Returns zero on success, else an error. */ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, - unsigned int debounce, bool *gpio_invert) + unsigned int idx, unsigned int debounce) { struct mmc_gpio *ctx = host->slot.handler_priv; struct gpio_desc *desc; @@ -241,8 +232,8 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, return ret; } - if (gpio_invert) - *gpio_invert = !gpiod_is_active_low(desc); + if (host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); ctx->ro_gpio = desc; |