aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/mmci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/mmci.c')
-rw-r--r--drivers/mmc/host/mmci.c82
1 files changed, 34 insertions, 48 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 387ff14587b8..356833a606d5 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -43,21 +43,11 @@
#include <asm/io.h>
#include "mmci.h"
-#include "mmci_qcom_dml.h"
#define DRIVER_NAME "mmci-pl18x"
-#ifdef CONFIG_DMA_ENGINE
-void mmci_variant_init(struct mmci_host *host);
-#else
-static inline void mmci_variant_init(struct mmci_host *host) {}
-#endif
-
-#ifdef CONFIG_MMC_STM32_SDMMC
-void sdmmc_variant_init(struct mmci_host *host);
-#else
-static inline void sdmmc_variant_init(struct mmci_host *host) {}
-#endif
+static void mmci_variant_init(struct mmci_host *host);
+static void ux500v2_variant_init(struct mmci_host *host);
static unsigned int fmax = 515633;
@@ -70,7 +60,6 @@ static struct variant_data variant_arm = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.reversed_irq_handling = true,
@@ -90,7 +79,6 @@ static struct variant_data variant_arm_extended_fifo = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -110,7 +98,6 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -131,7 +118,6 @@ static struct variant_data variant_u300 = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 16,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
@@ -157,7 +143,6 @@ static struct variant_data variant_nomadik = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -186,7 +171,6 @@ static struct variant_data variant_ux500 = {
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -220,11 +204,9 @@ static struct variant_data variant_ux500v2 = {
.datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE,
.datalength_bits = 24,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
- .blksz_datactrl16 = true,
.pwrreg_powerup = MCI_PWR_ON,
.f_max = 100000000,
.signal_direction = true,
@@ -238,7 +220,7 @@ static struct variant_data variant_ux500v2 = {
.irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
- .init = mmci_variant_init,
+ .init = ux500v2_variant_init,
};
static struct variant_data variant_stm32 = {
@@ -255,7 +237,6 @@ static struct variant_data variant_stm32 = {
.irq_pio_mask = MCI_IRQ_PIO_MASK,
.datalength_bits = 24,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -299,10 +280,8 @@ static struct variant_data variant_qcom = {
.cmdreg_srsp_crc = MCI_CPSM_RESPONSE,
.cmdreg_srsp = MCI_CPSM_RESPONSE,
.data_cmd_enable = MCI_CPSM_QCOM_DATCMD,
- .blksz_datactrl4 = true,
.datalength_bits = 24,
.datactrl_blocksz = 11,
- .datactrl_dpsm_enable = MCI_DPSM_ENABLE,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 208000000,
.explicit_mclk_control = true,
@@ -624,6 +603,16 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
}
+static u32 mmci_get_dctrl_cfg(struct mmci_host *host)
+{
+ return MCI_DPSM_ENABLE | mmci_dctrl_blksz(host);
+}
+
+static u32 ux500v2_get_dctrl_cfg(struct mmci_host *host)
+{
+ return MCI_DPSM_ENABLE | (host->data->blksz << 16);
+}
+
/*
* All the DMA operation mode stuff goes inside this ifdef.
* This assumes that you have a generic DMA device interface,
@@ -886,15 +875,11 @@ int mmci_dmae_prep_data(struct mmci_host *host,
int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl)
{
struct mmci_dmae_priv *dmae = host->dma_priv;
- struct mmc_data *data = host->data;
host->dma_in_progress = true;
dmaengine_submit(dmae->desc_current);
dma_async_issue_pending(dmae->cur);
- if (host->variant->qcom_dml)
- dml_start_xfer(host, data);
-
*datactrl |= MCI_DPSM_DMAENABLE;
return 0;
@@ -952,6 +937,7 @@ void mmci_dmae_unprep_data(struct mmci_host *host,
static struct mmci_host_ops mmci_variant_ops = {
.prep_data = mmci_dmae_prep_data,
.unprep_data = mmci_dmae_unprep_data,
+ .get_datactrl_cfg = mmci_get_dctrl_cfg,
.get_next_data = mmci_dmae_get_next_data,
.dma_setup = mmci_dmae_setup,
.dma_release = mmci_dmae_release,
@@ -959,12 +945,22 @@ static struct mmci_host_ops mmci_variant_ops = {
.dma_finalize = mmci_dmae_finalize,
.dma_error = mmci_dmae_error,
};
+#else
+static struct mmci_host_ops mmci_variant_ops = {
+ .get_datactrl_cfg = mmci_get_dctrl_cfg,
+};
+#endif
void mmci_variant_init(struct mmci_host *host)
{
host->ops = &mmci_variant_ops;
}
-#endif
+
+void ux500v2_variant_init(struct mmci_host *host)
+{
+ host->ops = &mmci_variant_ops;
+ host->ops->get_datactrl_cfg = ux500v2_get_dctrl_cfg;
+}
static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
@@ -1000,7 +996,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
unsigned int datactrl, timeout, irqmask;
unsigned long long clks;
void __iomem *base;
- int blksz_bits;
dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n",
data->blksz, data->blocks, data->flags);
@@ -1018,18 +1013,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
writel(timeout, base + MMCIDATATIMER);
writel(host->size, base + MMCIDATALENGTH);
- blksz_bits = ffs(data->blksz) - 1;
- BUG_ON(1 << blksz_bits != data->blksz);
-
- if (variant->blksz_datactrl16)
- datactrl = variant->datactrl_dpsm_enable | (data->blksz << 16);
- else if (variant->blksz_datactrl4)
- datactrl = variant->datactrl_dpsm_enable | (data->blksz << 4);
- else
- datactrl = variant->datactrl_dpsm_enable | blksz_bits << 4;
-
- if (data->flags & MMC_DATA_READ)
- datactrl |= MCI_DPSM_DIRECTION;
+ datactrl = host->ops->get_datactrl_cfg(host);
+ datactrl |= host->data->flags & MMC_DATA_READ ? MCI_DPSM_DIRECTION : 0;
if (host->mmc->card && mmc_card_sdio(host->mmc->card)) {
u32 clk;
@@ -1220,12 +1205,13 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
unsigned int status)
{
void __iomem *base = host->base;
- bool sbc;
+ bool sbc, busy_resp;
if (!cmd)
return;
sbc = (cmd == host->mrq->sbc);
+ busy_resp = !!(cmd->flags & MMC_RSP_BUSY);
/*
* We need to be one of these interrupts to be considered worth
@@ -1239,8 +1225,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
/*
* ST Micro variant: handle busy detection.
*/
- if (host->variant->busy_detect) {
- bool busy_resp = !!(cmd->flags & MMC_RSP_BUSY);
+ if (busy_resp && host->variant->busy_detect) {
/* We are busy with a command, return */
if (host->busy_status &&
@@ -1253,7 +1238,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
* that the special busy status bit is still set before
* proceeding.
*/
- if (!host->busy_status && busy_resp &&
+ if (!host->busy_status &&
!(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) &&
(readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) {
@@ -1550,9 +1535,10 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
}
/*
- * Don't poll for busy completion in irq context.
+ * Busy detection has been handled by mmci_cmd_irq() above.
+ * Clear the status bit to prevent polling in IRQ context.
*/
- if (host->variant->busy_detect && host->busy_status)
+ if (host->variant->busy_detect_flag)
status &= ~host->variant->busy_detect_flag;
ret = 1;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.