diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 33 |
1 files changed, 31 insertions, 2 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index f18d169bc8ff..afaf33707d46 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -196,6 +196,9 @@ */ #define ESDHC_FLAG_BROKEN_AUTO_CMD23 BIT(16) +/* ERR004536 is not applicable for the IP */ +#define ESDHC_FLAG_SKIP_ERR004536 BIT(17) + enum wp_types { ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ @@ -289,6 +292,13 @@ static const struct esdhc_soc_data usdhc_imx7d_data = { | ESDHC_FLAG_BROKEN_AUTO_CMD23, }; +static struct esdhc_soc_data usdhc_s32g2_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES + | ESDHC_FLAG_SKIP_ERR004536, +}; + static struct esdhc_soc_data usdhc_imx7ulp_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 @@ -347,6 +357,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { { .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, }, { .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, }, { .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, }, + { .compatible = "nxp,s32g2-usdhc", .data = &usdhc_s32g2_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); @@ -1187,6 +1198,7 @@ static void esdhc_reset_tuning(struct sdhci_host *host) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); u32 ctrl; + int ret; /* Reset the tuning circuit */ if (esdhc_is_usdhc(imx_data)) { @@ -1199,7 +1211,22 @@ static void esdhc_reset_tuning(struct sdhci_host *host) } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; + ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE; writel(ctrl, host->ioaddr + SDHCI_AUTO_CMD_STATUS); + /* Make sure ESDHC_MIX_CTRL_EXE_TUNE cleared */ + ret = readl_poll_timeout(host->ioaddr + SDHCI_AUTO_CMD_STATUS, + ctrl, !(ctrl & ESDHC_MIX_CTRL_EXE_TUNE), 1, 50); + if (ret == -ETIMEDOUT) + dev_warn(mmc_dev(host->mmc), + "Warning! clear execute tuning bit failed\n"); + /* + * SDHCI_INT_DATA_AVAIL is W1C bit, set this bit will clear the + * usdhc IP internal logic flag execute_tuning_with_clr_buf, which + * will finally make sure the normal data transfer logic correct. + */ + ctrl = readl(host->ioaddr + SDHCI_INT_STATUS); + ctrl |= SDHCI_INT_DATA_AVAIL; + writel(ctrl, host->ioaddr + SDHCI_INT_STATUS); } } } @@ -1359,8 +1386,10 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) * erratum ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL * TO1.1, it's harmless for MX6SL */ - writel(readl(host->ioaddr + 0x6c) & ~BIT(7), - host->ioaddr + 0x6c); + if (!(imx_data->socdata->flags & ESDHC_FLAG_SKIP_ERR004536)) { + writel(readl(host->ioaddr + 0x6c) & ~BIT(7), + host->ioaddr + 0x6c); + } /* disable DLL_CTRL delay line settings */ writel(0x0, host->ioaddr + ESDHC_DLL_CTRL); |