1 files changed, 24 insertions, 10 deletions

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 5a33389037cd..3451eb325513 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -263,7 +263,6 @@ struct sdhci_msm_host {
 	unsigned long clk_rate;
 	struct mmc_host *mmc;
 	struct opp_table *opp_table;
-	bool has_opp_table;
 	bool use_14lpp_dll_reset;
 	bool tuning_done;
 	bool calibration_done;
@@ -1166,7 +1165,7 @@ static void sdhci_msm_set_cdr(struct sdhci_host *host, bool enable)
 static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
-	int tuning_seq_cnt = 3;
+	int tuning_seq_cnt = 10;
 	u8 phase, tuned_phases[16], tuned_phase_cnt = 0;
 	int rc;
 	struct mmc_ios ios = host->mmc->ios;
@@ -1222,6 +1221,22 @@ retry:
 	} while (++phase < ARRAY_SIZE(tuned_phases));
 
 	if (tuned_phase_cnt) {
+		if (tuned_phase_cnt == ARRAY_SIZE(tuned_phases)) {
+			/*
+			 * All phases valid is _almost_ as bad as no phases
+			 * valid.  Probably all phases are not really reliable
+			 * but we didn't detect where the unreliable place is.
+			 * That means we'll essentially be guessing and hoping
+			 * we get a good phase.  Better to try a few times.
+			 */
+			dev_dbg(mmc_dev(mmc), "%s: All phases valid; try again\n",
+				mmc_hostname(mmc));
+			if (--tuning_seq_cnt) {
+				tuned_phase_cnt = 0;
+				goto retry;
+			}
+		}
+
 		rc = msm_find_most_appropriate_phase(host, tuned_phases,
 						     tuned_phase_cnt);
 		if (rc < 0)
@@ -2151,6 +2166,7 @@ static const struct of_device_id sdhci_msm_dt_match[] = {
 	{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
 	{.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var},
 	{.compatible = "qcom,sm8250-sdhci", .data = &sm8250_sdhci_var},
+	{.compatible = "qcom,sc7180-sdhci", .data = &sdm845_sdhci_var},
 	{},
 };
 
@@ -2285,11 +2301,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 
 	/* OPP table is optional */
 	ret = dev_pm_opp_of_add_table(&pdev->dev);
-	if (!ret) {
-		msm_host->has_opp_table = true;
-	} else if (ret != -ENODEV) {
+	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "Invalid OPP table in Device tree\n");
-		goto opp_cleanup;
+		goto opp_put_clkname;
 	}
 
 	/* Vote for maximum clock rate for maximum performance */
@@ -2453,8 +2467,8 @@ clk_disable:
 	clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
 				   msm_host->bulk_clks);
 opp_cleanup:
-	if (msm_host->has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
+opp_put_clkname:
 	dev_pm_opp_put_clkname(msm_host->opp_table);
 bus_clk_disable:
 	if (!IS_ERR(msm_host->bus_clk))
@@ -2474,8 +2488,7 @@ static int sdhci_msm_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, dead);
 
-	if (msm_host->has_opp_table)
-		dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
 	dev_pm_opp_put_clkname(msm_host->opp_table);
 	pm_runtime_get_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
@@ -2541,6 +2554,7 @@ static struct platform_driver sdhci_msm_driver = {
 		   .name = "sdhci_msm",
 		   .of_match_table = sdhci_msm_dt_match,
 		   .pm = &sdhci_msm_pm_ops,
+		   .probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 };