diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-of-at91.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-of-at91.c | 212 |
1 files changed, 145 insertions, 67 deletions
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 7611fd679f1a..4e47ed6bc716 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -31,6 +31,7 @@ #define SDMMC_MC1R 0x204 #define SDMMC_MC1R_DDR BIT(3) +#define SDMMC_MC1R_FCD BIT(7) #define SDMMC_CACR 0x230 #define SDMMC_CACR_CAPWREN BIT(0) #define SDMMC_CACR_KEY (0x46 << 8) @@ -41,8 +42,18 @@ struct sdhci_at91_priv { struct clk *hclock; struct clk *gck; struct clk *mainck; + bool restore_needed; }; +static void sdhci_at91_set_force_card_detect(struct sdhci_host *host) +{ + u8 mc1r; + + mc1r = readb(host->ioaddr + SDMMC_MC1R); + mc1r |= SDMMC_MC1R_FCD; + writeb(mc1r, host->ioaddr + SDMMC_MC1R); +} + static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) { u16 clk; @@ -110,10 +121,18 @@ void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) sdhci_set_uhs_signaling(host, timing); } +static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + sdhci_at91_set_force_card_detect(host); +} + static const struct sdhci_ops sdhci_at91_sama5d2_ops = { .set_clock = sdhci_at91_set_clock, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_at91_reset, .set_uhs_signaling = sdhci_at91_set_uhs_signaling, .set_power = sdhci_at91_set_power, }; @@ -128,6 +147,100 @@ static const struct of_device_id sdhci_at91_dt_match[] = { }; MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match); +static int sdhci_at91_set_clks_presets(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret; + unsigned int caps0, caps1; + unsigned int clk_base, clk_mul; + unsigned int gck_rate, real_gck_rate; + unsigned int preset_div; + + /* + * The mult clock is provided by as a generated clock by the PMC + * controller. In order to set the rate of gck, we have to get the + * base clock rate and the clock mult from capabilities. + */ + clk_prepare_enable(priv->hclock); + caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); + caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); + clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; + clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; + gck_rate = clk_base * 1000000 * (clk_mul + 1); + ret = clk_set_rate(priv->gck, gck_rate); + if (ret < 0) { + dev_err(dev, "failed to set gck"); + clk_disable_unprepare(priv->hclock); + return ret; + } + /* + * We need to check if we have the requested rate for gck because in + * some cases this rate could be not supported. If it happens, the rate + * is the closest one gck can provide. We have to update the value + * of clk mul. + */ + real_gck_rate = clk_get_rate(priv->gck); + if (real_gck_rate != gck_rate) { + clk_mul = real_gck_rate / (clk_base * 1000000) - 1; + caps1 &= (~SDHCI_CLOCK_MUL_MASK); + caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & + SDHCI_CLOCK_MUL_MASK); + /* Set capabilities in r/w mode. */ + writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, + host->ioaddr + SDMMC_CACR); + writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); + /* Set capabilities in ro mode. */ + writel(0, host->ioaddr + SDMMC_CACR); + dev_info(dev, "update clk mul to %u as gck rate is %u Hz\n", + clk_mul, real_gck_rate); + } + + /* + * We have to set preset values because it depends on the clk_mul + * value. Moreover, SDR104 is supported in a degraded mode since the + * maximum sd clock value is 120 MHz instead of 208 MHz. For that + * reason, we need to use presets to support SDR104. + */ + preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR12); + preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR25); + preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR50); + preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_SDR104); + preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, + host->ioaddr + SDHCI_PRESET_FOR_DDR50); + + clk_prepare_enable(priv->mainck); + clk_prepare_enable(priv->gck); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_at91_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret; + + ret = pm_runtime_force_suspend(dev); + + priv->restore_needed = true; + + return ret; +} +#endif /* CONFIG_PM_SLEEP */ + #ifdef CONFIG_PM static int sdhci_at91_runtime_suspend(struct device *dev) { @@ -155,6 +268,15 @@ static int sdhci_at91_runtime_resume(struct device *dev) struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); int ret; + if (priv->restore_needed) { + ret = sdhci_at91_set_clks_presets(dev); + if (ret) + return ret; + + priv->restore_needed = false; + goto out; + } + ret = clk_prepare_enable(priv->mainck); if (ret) { dev_err(dev, "can't enable mainck\n"); @@ -173,13 +295,13 @@ static int sdhci_at91_runtime_resume(struct device *dev) return ret; } +out: return sdhci_runtime_resume_host(host); } #endif /* CONFIG_PM */ static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, - pm_runtime_force_resume) + SET_SYSTEM_SLEEP_PM_OPS(sdhci_at91_suspend, pm_runtime_force_resume) SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend, sdhci_at91_runtime_resume, NULL) @@ -192,11 +314,7 @@ static int sdhci_at91_probe(struct platform_device *pdev) struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct sdhci_at91_priv *priv; - unsigned int caps0, caps1; - unsigned int clk_base, clk_mul; - unsigned int gck_rate, real_gck_rate; int ret; - unsigned int preset_div; match = of_match_device(sdhci_at91_dt_match, &pdev->dev); if (!match) @@ -228,66 +346,11 @@ static int sdhci_at91_probe(struct platform_device *pdev) return PTR_ERR(priv->gck); } - /* - * The mult clock is provided by as a generated clock by the PMC - * controller. In order to set the rate of gck, we have to get the - * base clock rate and the clock mult from capabilities. - */ - clk_prepare_enable(priv->hclock); - caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); - caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); - clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; - clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; - gck_rate = clk_base * 1000000 * (clk_mul + 1); - ret = clk_set_rate(priv->gck, gck_rate); - if (ret < 0) { - dev_err(&pdev->dev, "failed to set gck"); - goto hclock_disable_unprepare; - } - /* - * We need to check if we have the requested rate for gck because in - * some cases this rate could be not supported. If it happens, the rate - * is the closest one gck can provide. We have to update the value - * of clk mul. - */ - real_gck_rate = clk_get_rate(priv->gck); - if (real_gck_rate != gck_rate) { - clk_mul = real_gck_rate / (clk_base * 1000000) - 1; - caps1 &= (~SDHCI_CLOCK_MUL_MASK); - caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK); - /* Set capabilities in r/w mode. */ - writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); - writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); - /* Set capabilities in ro mode. */ - writel(0, host->ioaddr + SDMMC_CACR); - dev_info(&pdev->dev, "update clk mul to %u as gck rate is %u Hz\n", - clk_mul, real_gck_rate); - } - - /* - * We have to set preset values because it depends on the clk_mul - * value. Moreover, SDR104 is supported in a degraded mode since the - * maximum sd clock value is 120 MHz instead of 208 MHz. For that - * reason, we need to use presets to support SDR104. - */ - preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1; - writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, - host->ioaddr + SDHCI_PRESET_FOR_SDR12); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; - writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, - host->ioaddr + SDHCI_PRESET_FOR_SDR25); - preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1; - writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, - host->ioaddr + SDHCI_PRESET_FOR_SDR50); - preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1; - writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, - host->ioaddr + SDHCI_PRESET_FOR_SDR104); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; - writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, - host->ioaddr + SDHCI_PRESET_FOR_DDR50); + ret = sdhci_at91_set_clks_presets(&pdev->dev); + if (ret) + goto sdhci_pltfm_free; - clk_prepare_enable(priv->mainck); - clk_prepare_enable(priv->gck); + priv->restore_needed = false; ret = mmc_of_parse(host->mmc); if (ret) @@ -324,6 +387,21 @@ static int sdhci_at91_probe(struct platform_device *pdev) host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; } + /* + * If the device attached to the MMC bus is not removable, it is safer + * to set the Force Card Detect bit. People often don't connect the + * card detect signal and use this pin for another purpose. If the card + * detect pin is not muxed to SDHCI controller, a default value is + * used. This value can be different from a SoC revision to another + * one. Problems come when this default value is not card present. To + * avoid this case, if the device is non removable then the card + * detection procedure using the SDMCC_CD signal is bypassed. + * This bit is reset when a software reset for all command is performed + * so we need to implement our own reset function to set back this bit. + */ + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + sdhci_at91_set_force_card_detect(host); + pm_runtime_put_autosuspend(&pdev->dev); return 0; @@ -335,8 +413,8 @@ pm_runtime_disable: clocks_disable_unprepare: clk_disable_unprepare(priv->gck); clk_disable_unprepare(priv->mainck); -hclock_disable_unprepare: clk_disable_unprepare(priv->hclock); +sdhci_pltfm_free: sdhci_pltfm_free(pdev); return ret; } |