aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/maps')
-rw-r--r--drivers/mtd/maps/Kconfig21
-rw-r--r--drivers/mtd/maps/Makefile4
-rw-r--r--drivers/mtd/maps/bfin-async-flash.c2
-rw-r--r--drivers/mtd/maps/ceiva.c2
-rw-r--r--drivers/mtd/maps/dc21285.c4
-rw-r--r--drivers/mtd/maps/gpio-addr-flash.c311
-rw-r--r--drivers/mtd/maps/ipaq-flash.c2
-rw-r--r--drivers/mtd/maps/ixp2000.c2
-rw-r--r--drivers/mtd/maps/physmap_of.c24
-rw-r--r--drivers/mtd/maps/plat-ram.c2
-rw-r--r--drivers/mtd/maps/pmcmsp-flash.c76
-rw-r--r--drivers/mtd/maps/pxa2xx-flash.c2
-rw-r--r--drivers/mtd/maps/sa1100-flash.c2
-rw-r--r--drivers/mtd/maps/sbc8240.c250
-rw-r--r--drivers/mtd/maps/uclinux.c8
15 files changed, 415 insertions, 297 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 0b98654d8eed..841e085ab74a 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -74,7 +74,7 @@ config MTD_PHYSMAP_BANKWIDTH
config MTD_PHYSMAP_OF
tristate "Flash device in physical memory map based on OF description"
- depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+ depends on (MICROBLAZE || PPC_OF) && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
help
This provides a 'mapping' driver which allows the NOR Flash and
ROM driver code to communicate with chips which are mapped
@@ -284,13 +284,6 @@ config MTD_L440GX
BE VERY CAREFUL.
-config MTD_SBC8240
- tristate "Flash device on SBC8240"
- depends on MTD_JEDECPROBE && 8260
- help
- Flash access on the SBC8240 board from Wind River. See
- <http://www.windriver.com/products/sbc8240/>
-
config MTD_TQM8XXL
tristate "CFI Flash device mapped on TQM8XXL"
depends on MTD_CFI && TQM8xxL
@@ -491,9 +484,19 @@ config MTD_BFIN_ASYNC
If compiled as a module, it will be called bfin-async-flash.
+config MTD_GPIO_ADDR
+ tristate "GPIO-assisted Flash Chip Support"
+ depends on MTD_COMPLEX_MAPPINGS
+ select MTD_PARTITIONS
+ help
+ Map driver which allows flashes to be partially physically addressed
+ and assisted by GPIOs.
+
+ If compiled as a module, it will be called gpio-addr-flash.
+
config MTD_UCLINUX
bool "Generic uClinux RAM/ROM filesystem support"
- depends on MTD_PARTITIONS && MTD_RAM && !MMU
+ depends on MTD_PARTITIONS && MTD_RAM=y && !MMU
help
Map driver to support image based filesystems for uClinux.
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 8bae7f9850c0..1d5cf8636723 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
-obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o
@@ -59,5 +58,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
-obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
-obj-$(CONFIG_MTD_VMU) += vmu-flash.o
+obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
index 365c77b1b871..a7c808b577d3 100644
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -6,7 +6,7 @@
* for example. All board-specific configuration goes in your
* board resources file.
*
- * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2000 Nicolas Pitre <nico@fluxnic.net>
* Copyright 2005-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 60e68bde0fea..d41f34766e53 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -9,7 +9,7 @@
* Based on: sa1100-flash.c, which has the following copyright:
* Flash memory access on SA11x0 based devices
*
- * (C) 2000 Nicolas Pitre <nico@cam.org>
+ * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
*
*/
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index 42969fe051b2..b3cb3a183809 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -1,7 +1,7 @@
/*
* MTD map driver for flash on the DC21285 (the StrongARM-110 companion chip)
*
- * (C) 2000 Nicolas Pitre <nico@cam.org>
+ * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
*
* This code is GPL
*/
@@ -249,5 +249,5 @@ module_exit(cleanup_dc21285);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_AUTHOR("Nicolas Pitre <nico@fluxnic.net>");
MODULE_DESCRIPTION("MTD map driver for DC21285 boards");
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
new file mode 100644
index 000000000000..44ef9a49a860
--- /dev/null
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -0,0 +1,311 @@
+/*
+ * drivers/mtd/maps/gpio-addr-flash.c
+ *
+ * Handle the case where a flash device is mostly addressed using physical
+ * line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
+ * to a 2MiB memory range and use the GPIOs to select a particular range.
+ *
+ * Copyright © 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright © 2005-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "gpio-addr-flash"
+#define PFX DRIVER_NAME ": "
+
+/**
+ * struct async_state - keep GPIO flash state
+ * @mtd: MTD state for this mapping
+ * @map: MTD map state for this flash
+ * @gpio_count: number of GPIOs used to address
+ * @gpio_addrs: array of GPIOs to twiddle
+ * @gpio_values: cached GPIO values
+ * @win_size: dedicated memory size (if no GPIOs)
+ */
+struct async_state {
+ struct mtd_info *mtd;
+ struct map_info map;
+ size_t gpio_count;
+ unsigned *gpio_addrs;
+ int *gpio_values;
+ unsigned long win_size;
+};
+#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
+
+/**
+ * gf_set_gpios() - set GPIO address lines to access specified flash offset
+ * @state: GPIO flash state
+ * @ofs: desired offset to access
+ *
+ * Rather than call the GPIO framework every time, cache the last-programmed
+ * value. This speeds up sequential accesses (which are by far the most common
+ * type). We rely on the GPIO framework to treat non-zero value as high so
+ * that we don't have to normalize the bits.
+ */
+static void gf_set_gpios(struct async_state *state, unsigned long ofs)
+{
+ size_t i = 0;
+ int value;
+ ofs /= state->win_size;
+ do {
+ value = ofs & (1 << i);
+ if (state->gpio_values[i] != value) {
+ gpio_set_value(state->gpio_addrs[i], value);
+ state->gpio_values[i] = value;
+ }
+ } while (++i < state->gpio_count);
+}
+
+/**
+ * gf_read() - read a word at the specified offset
+ * @map: MTD map state
+ * @ofs: desired offset to read
+ */
+static map_word gf_read(struct map_info *map, unsigned long ofs)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+ uint16_t word;
+ map_word test;
+
+ gf_set_gpios(state, ofs);
+
+ word = readw(map->virt + (ofs % state->win_size));
+ test.x[0] = word;
+ return test;
+}
+
+/**
+ * gf_copy_from() - copy a chunk of data from the flash
+ * @map: MTD map state
+ * @to: memory to copy to
+ * @from: flash offset to copy from
+ * @len: how much to copy
+ *
+ * We rely on the MTD layer to chunk up copies such that a single request here
+ * will not cross a window size. This allows us to only wiggle the GPIOs once
+ * before falling back to a normal memcpy. Reading the higher layer code shows
+ * that this is indeed the case, but add a BUG_ON() to future proof.
+ */
+static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+
+ gf_set_gpios(state, from);
+
+ /* BUG if operation crosses the win_size */
+ BUG_ON(!((from + len) % state->win_size <= (from + len)));
+
+ /* operation does not cross the win_size, so one shot it */
+ memcpy_fromio(to, map->virt + (from % state->win_size), len);
+}
+
+/**
+ * gf_write() - write a word at the specified offset
+ * @map: MTD map state
+ * @ofs: desired offset to write
+ */
+static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+ uint16_t d;
+
+ gf_set_gpios(state, ofs);
+
+ d = d1.x[0];
+ writew(d, map->virt + (ofs % state->win_size));
+}
+
+/**
+ * gf_copy_to() - copy a chunk of data to the flash
+ * @map: MTD map state
+ * @to: flash offset to copy to
+ * @from: memory to copy from
+ * @len: how much to copy
+ *
+ * See gf_copy_from() caveat.
+ */
+static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ struct async_state *state = gf_map_info_to_state(map);
+
+ gf_set_gpios(state, to);
+
+ /* BUG if operation crosses the win_size */
+ BUG_ON(!((to + len) % state->win_size <= (to + len)));
+
+ /* operation does not cross the win_size, so one shot it */
+ memcpy_toio(map->virt + (to % state->win_size), from, len);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+/**
+ * gpio_flash_probe() - setup a mapping for a GPIO assisted flash
+ * @pdev: platform device
+ *
+ * The platform resource layout expected looks something like:
+ * struct mtd_partition partitions[] = { ... };
+ * struct physmap_flash_data flash_data = { ... };
+ * unsigned flash_gpios[] = { GPIO_XX, GPIO_XX, ... };
+ * struct resource flash_resource[] = {
+ * {
+ * .name = "cfi_probe",
+ * .start = 0x20000000,
+ * .end = 0x201fffff,
+ * .flags = IORESOURCE_MEM,
+ * }, {
+ * .start = (unsigned long)flash_gpios,
+ * .end = ARRAY_SIZE(flash_gpios),
+ * .flags = IORESOURCE_IRQ,
+ * }
+ * };
+ * struct platform_device flash_device = {
+ * .name = "gpio-addr-flash",
+ * .dev = { .platform_data = &flash_data, },
+ * .num_resources = ARRAY_SIZE(flash_resource),
+ * .resource = flash_resource,
+ * ...
+ * };
+ */
+static int __devinit gpio_flash_probe(struct platform_device *pdev)
+{
+ int ret;
+ size_t i, arr_size;
+ struct physmap_flash_data *pdata;
+ struct resource *memory;
+ struct resource *gpios;
+ struct async_state *state;
+
+ pdata = pdev->dev.platform_data;
+ memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (!memory || !gpios || !gpios->end)
+ return -EINVAL;
+
+ arr_size = sizeof(int) * gpios->end;
+ state = kzalloc(sizeof(*state) + arr_size, GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ state->gpio_count = gpios->end;
+ state->gpio_addrs = (void *)gpios->start;
+ state->gpio_values = (void *)(state + 1);
+ state->win_size = memory->end - memory->start + 1;
+ memset(state->gpio_values, 0xff, arr_size);
+
+ state->map.name = DRIVER_NAME;
+ state->map.read = gf_read;
+ state->map.copy_from = gf_copy_from;
+ state->map.write = gf_write;
+ state->map.copy_to = gf_copy_to;
+ state->map.bankwidth = pdata->width;
+ state->map.size = state->win_size * (1 << state->gpio_count);
+ state->map.virt = (void __iomem *)memory->start;
+ state->map.phys = NO_XIP;
+ state->map.map_priv_1 = (unsigned long)state;
+
+ platform_set_drvdata(pdev, state);
+
+ i = 0;
+ do {
+ if (gpio_request(state->gpio_addrs[i], DRIVER_NAME)) {
+ pr_devinit(KERN_ERR PFX "failed to request gpio %d\n",
+ state->gpio_addrs[i]);
+ while (i--)
+ gpio_free(state->gpio_addrs[i]);
+ kfree(state);
+ return -EBUSY;
+ }
+ gpio_direction_output(state->gpio_addrs[i], 0);
+ } while (++i < state->gpio_count);
+
+ pr_devinit(KERN_NOTICE PFX "probing %d-bit flash bus\n",
+ state->map.bankwidth * 8);
+ state->mtd = do_map_probe(memory->name, &state->map);
+ if (!state->mtd) {
+ for (i = 0; i < state->gpio_count; ++i)
+ gpio_free(state->gpio_addrs[i]);
+ kfree(state);
+ return -ENXIO;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+ if (ret > 0) {
+ pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
+ add_mtd_partitions(state->mtd, pdata->parts, ret);
+ kfree(pdata->parts);
+
+ } else if (pdata->nr_parts) {
+ pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
+ add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+ } else
+#endif
+ {
+ pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
+ add_mtd_device(state->mtd);
+ }
+
+ return 0;
+}
+
+static int __devexit gpio_flash_remove(struct platform_device *pdev)
+{
+ struct async_state *state = platform_get_drvdata(pdev);
+ size_t i = 0;
+ do {
+ gpio_free(state->gpio_addrs[i]);
+ } while (++i < state->gpio_count);
+#ifdef CONFIG_MTD_PARTITIONS
+ del_mtd_partitions(state->mtd);
+#endif
+ map_destroy(state->mtd);
+ kfree(state);
+ return 0;
+}
+
+static struct platform_driver gpio_flash_driver = {
+ .probe = gpio_flash_probe,
+ .remove = __devexit_p(gpio_flash_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init gpio_flash_init(void)
+{
+ return platform_driver_register(&gpio_flash_driver);
+}
+module_init(gpio_flash_init);
+
+static void __exit gpio_flash_exit(void)
+{
+ platform_driver_unregister(&gpio_flash_driver);
+}
+module_exit(gpio_flash_exit);
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index 748c85f635f1..76708e796b70 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -1,7 +1,7 @@
/*
* Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based)
*
- * (C) 2000 Nicolas Pitre <nico@cam.org>
+ * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
* (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
* (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
*/
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index d4fb9a3ab4df..1bdf0ee6d0b6 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
info->map.bankwidth = 1;
/*
- * map_priv_2 is used to store a ptr to to the bank_setup routine
+ * map_priv_2 is used to store a ptr to the bank_setup routine
*/
info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 39d357b2eb47..61e4eb48bb2d 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -190,6 +190,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
const u32 *p;
int reg_tuple_size;
struct mtd_info **mtd_list = NULL;
+ resource_size_t res_size;
reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
@@ -204,7 +205,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
dev_err(&dev->dev, "Malformed reg property on %s\n",
dev->node->full_name);
err = -EINVAL;
- goto err_out;
+ goto err_flash_remove;
}
count /= reg_tuple_size;
@@ -212,14 +213,14 @@ static int __devinit of_flash_probe(struct of_device *dev,
info = kzalloc(sizeof(struct of_flash) +
sizeof(struct of_flash_list) * count, GFP_KERNEL);
if (!info)
- goto err_out;
-
- mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
- if (!info)
- goto err_out;
+ goto err_flash_remove;
dev_set_drvdata(&dev->dev, info);
+ mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
+ if (!mtd_list)
+ goto err_flash_remove;
+
for (i = 0; i < count; i++) {
err = -ENXIO;
if (of_address_to_resource(dp, i, &res)) {
@@ -233,8 +234,8 @@ static int __devinit of_flash_probe(struct of_device *dev,
(unsigned long long)res.end);
err = -EBUSY;
- info->list[i].res = request_mem_region(res.start, res.end -
- res.start + 1,
+ res_size = resource_size(&res);
+ info->list[i].res = request_mem_region(res.start, res_size,
dev_name(&dev->dev));
if (!info->list[i].res)
goto err_out;
@@ -249,7 +250,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
info->list[i].map.name = dev_name(&dev->dev);
info->list[i].map.phys = res.start;
- info->list[i].map.size = res.end - res.start + 1;
+ info->list[i].map.size = res_size;
info->list[i].map.bankwidth = *width;
err = -ENOMEM;
@@ -338,6 +339,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
err_out:
kfree(mtd_list);
+err_flash_remove:
of_flash_remove(dev);
return err;
@@ -360,6 +362,10 @@ static struct of_device_id of_flash_match[] = {
.data = (void *)"jedec_probe",
},
{
+ .compatible = "mtd-ram",
+ .data = (void *)"map_ram",
+ },
+ {
.type = "rom",
.compatible = "direct-mapped"
},
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 49c9ece76477..dafb91944e70 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -175,7 +175,7 @@ static int platram_probe(struct platform_device *pdev)
/* setup map parameters */
info->map.phys = res->start;
- info->map.size = (res->end - res->start) + 1;
+ info->map.size = resource_size(res);
info->map.name = pdata->mapname != NULL ?
(char *)pdata->mapname : (char *)pdev->name;
info->map.bankwidth = pdata->bankwidth;
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index 4768bd5459d6..c8fd8da4bc87 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -50,7 +50,7 @@ static int fcnt;
static int __init init_msp_flash(void)
{
- int i, j;
+ int i, j, ret = -ENOMEM;
int offset, coff;
char *env;
int pcnt;
@@ -75,14 +75,16 @@ static int __init init_msp_flash(void)
printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt);
msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL);
+ if (!msp_flash)
+ return -ENOMEM;
+
msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL);
+ if (!msp_parts)
+ goto free_msp_flash;
+
msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL);
- if (!msp_flash || !msp_parts || !msp_maps) {
- kfree(msp_maps);
- kfree(msp_parts);
- kfree(msp_flash);
- return -ENOMEM;
- }
+ if (!msp_maps)
+ goto free_msp_parts;
/* loop over the flash devices, initializing each */
for (i = 0; i < fcnt; i++) {
@@ -100,13 +102,18 @@ static int __init init_msp_flash(void)
msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition),
GFP_KERNEL);
+ if (!msp_parts[i])
+ goto cleanup_loop;
/* now initialize the devices proper */
flash_name[5] = '0' + i;
env = prom_getenv(flash_name);
- if (sscanf(env, "%x:%x", &addr, &size) < 2)
- return -ENXIO;
+ if (sscanf(env, "%x:%x", &addr, &size) < 2) {
+ ret = -ENXIO;
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
addr = CPHYSADDR(addr);
printk(KERN_NOTICE
@@ -122,13 +129,23 @@ static int __init init_msp_flash(void)
*/
if (size > CONFIG_MSP_FLASH_MAP_LIMIT)
size = CONFIG_MSP_FLASH_MAP_LIMIT;
+
msp_maps[i].virt = ioremap(addr, size);
+ if (msp_maps[i].virt == NULL) {
+ ret = -ENXIO;
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
+
msp_maps[i].bankwidth = 1;
- msp_maps[i].name = strncpy(kmalloc(7, GFP_KERNEL),
- flash_name, 7);
+ msp_maps[i].name = kmalloc(7, GFP_KERNEL);
+ if (!msp_maps[i].name) {
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
- if (msp_maps[i].virt == NULL)
- return -ENXIO;
+ msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7);
for (j = 0; j < pcnt; j++) {
part_name[5] = '0' + i;
@@ -136,8 +153,14 @@ static int __init init_msp_flash(void)
env = prom_getenv(part_name);
- if (sscanf(env, "%x:%x:%n", &offset, &size, &coff) < 2)
- return -ENXIO;
+ if (sscanf(env, "%x:%x:%n", &offset, &size,
+ &coff) < 2) {
+ ret = -ENXIO;
+ kfree(msp_maps[i].name);
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
+ }
msp_parts[i][j].size = size;
msp_parts[i][j].offset = offset;
@@ -152,18 +175,37 @@ static int __init init_msp_flash(void)
add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt);
} else {
printk(KERN_ERR "map probe failed for flash\n");
- return -ENXIO;
+ ret = -ENXIO;
+ kfree(msp_maps[i].name);
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ goto cleanup_loop;
}
}
return 0;
+
+cleanup_loop:
+ while (i--) {
+ del_mtd_partitions(msp_flash[i]);
+ map_destroy(msp_flash[i]);
+ kfree(msp_maps[i].name);
+ iounmap(msp_maps[i].virt);
+ kfree(msp_parts[i]);
+ }
+ kfree(msp_maps);
+free_msp_parts:
+ kfree(msp_parts);
+free_msp_flash:
+ kfree(msp_flash);
+ return ret;
}
static void __exit cleanup_msp_flash(void)
{
int i;
- for (i = 0; i < sizeof(msp_flash) / sizeof(struct mtd_info **); i++) {
+ for (i = 0; i < fcnt; i++) {
del_mtd_partitions(msp_flash[i]);
map_destroy(msp_flash[i]);
iounmap((void *)msp_maps[i].virt);
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index 643aa06b599e..74fa075c838a 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -175,5 +175,5 @@ module_init(init_pxa2xx_flash);
module_exit(cleanup_pxa2xx_flash);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");
+MODULE_AUTHOR("Nicolas Pitre <nico@fluxnic.net>");
MODULE_DESCRIPTION("MTD map driver for Intel XScale PXA2xx");
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index c6210f5118d1..fdb97f3d30e9 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -1,7 +1,7 @@
/*
* Flash memory access on SA11x0 based devices
*
- * (C) 2000 Nicolas Pitre <nico@cam.org>
+ * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
*/
#include <linux/module.h>
#include <linux/types.h>
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
deleted file mode 100644
index d5374cdcb163..000000000000
--- a/drivers/mtd/maps/sbc8240.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Handle mapping of the flash memory access routines on the SBC8240 board.
- *
- * Carolyn Smith, Tektronix, Inc.
- *
- * This code is GPLed
- */
-
-/*
- * The SBC8240 has 2 flash banks.
- * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors.
- * It contains the U-Boot code (7 sectors) and the environment (1 sector).
- * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB sector,
- * 2 x 8 KiB sectors, 1 x 16 KiB sectors.
- * Both parts are JEDEC compatible.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/cfi.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#define DEBUG
-
-#ifdef DEBUG
-# define debugk(fmt,args...) printk(fmt ,##args)
-#else
-# define debugk(fmt,args...)
-#endif
-
-
-#define WINDOW_ADDR0 0xFFF00000 /* 512 KiB */
-#define WINDOW_SIZE0 0x00080000
-#define BUSWIDTH0 1
-
-#define WINDOW_ADDR1 0xFF000000 /* 4 MiB */
-#define WINDOW_SIZE1 0x00400000
-#define BUSWIDTH1 8
-
-#define MSG_PREFIX "sbc8240:" /* prefix for our printk()'s */
-#define MTDID "sbc8240-%d" /* for mtdparts= partitioning */
-
-
-static struct map_info sbc8240_map[2] = {
- {
- .name = "sbc8240 Flash Bank #0",
- .size = WINDOW_SIZE0,
- .bankwidth = BUSWIDTH0,
- },
- {
- .name = "sbc8240 Flash Bank #1",
- .size = WINDOW_SIZE1,
- .bankwidth = BUSWIDTH1,
- }
-};
-
-#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map)
-
-/*
- * The following defines the partition layout of SBC8240 boards.
- *
- * See include/linux/mtd/partitions.h for definition of the
- * mtd_partition structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size
- * which is not necessarily the actual flash size. It must correspond
- * to the value specified in the mapping definition defined by the
- * "struct map_desc *_io_desc" for the corresponding machine.
- */
-
-#ifdef CONFIG_MTD_PARTITIONS
-
-static struct mtd_partition sbc8240_uboot_partitions [] = {
- /* Bank 0 */
- {
- .name = "U-boot", /* U-Boot Firmware */
- .offset = 0,
- .size = 0x00070000, /* 7 x 64 KiB sectors */
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "environment", /* U-Boot environment */
- .offset = 0x00070000,
- .size = 0x00010000, /* 1 x 64 KiB sector */
- },
-};
-
-static struct mtd_partition sbc8240_fs_partitions [] = {
- {
- .name = "jffs", /* JFFS filesystem */
- .offset = 0,
- .size = 0x003C0000, /* 4 * 15 * 64KiB */
- },
- {
- .name = "tmp32",
- .offset = 0x003C0000,
- .size = 0x00020000, /* 4 * 32KiB */
- },
- {
- .name = "tmp8a",
- .offset = 0x003E0000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp8b",
- .offset = 0x003E8000,
- .size = 0x00008000, /* 4 * 8KiB */
- },
- {
- .name = "tmp16",
- .offset = 0x003F0000,
- .size = 0x00010000, /* 4 * 16KiB */
- }
-};
-
-/* trivial struct to describe partition information */
-struct mtd_part_def
-{
- int nums;
- unsigned char *type;
- struct mtd_partition* mtd_part;
-};
-
-static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS];
-static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS];
-
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
-
-static int __init init_sbc8240_mtd (void)
-{
- static struct _cjs {
- u_long addr;
- u_long size;
- } pt[NUM_FLASH_BANKS] = {
- {
- .addr = WINDOW_ADDR0,
- .size = WINDOW_SIZE0
- },
- {
- .addr = WINDOW_ADDR1,
- .size = WINDOW_SIZE1
- },
- };
-
- int devicesfound = 0;
- int i,j;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- printk (KERN_NOTICE MSG_PREFIX
- "Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr);
-
- sbc8240_map[i].map_priv_1 =
- (unsigned long) ioremap (pt[i].addr, pt[i].size);
- if (!sbc8240_map[i].map_priv_1) {
- printk (MSG_PREFIX "failed to ioremap\n");
- for (j = 0; j < i; j++) {
- iounmap((void *) sbc8240_map[j].map_priv_1);
- sbc8240_map[j].map_priv_1 = 0;
- }
- return -EIO;
- }
- simple_map_init(&sbc8240_mtd[i]);
-
- sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]);
-
- if (sbc8240_mtd[i]) {
- sbc8240_mtd[i]->module = THIS_MODULE;
- devicesfound++;
- } else {
- if (sbc8240_map[i].map_priv_1) {
- iounmap((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
- }
-
- if (!devicesfound) {
- printk(KERN_NOTICE MSG_PREFIX
- "No suppported flash chips found!\n");
- return -ENXIO;
- }
-
-#ifdef CONFIG_MTD_PARTITIONS
- sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions;
- sbc8240_part_banks[0].type = "static image";
- sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions);
- sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions;
- sbc8240_part_banks[1].type = "static file system";
- sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions);
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
-
- if (!sbc8240_mtd[i]) continue;
- if (sbc8240_part_banks[i].nums == 0) {
- printk (KERN_NOTICE MSG_PREFIX
- "No partition info available, registering whole device\n");
- add_mtd_device(sbc8240_mtd[i]);
- } else {
- printk (KERN_NOTICE MSG_PREFIX
- "Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name);
- add_mtd_partitions (sbc8240_mtd[i],
- sbc8240_part_banks[i].mtd_part,
- sbc8240_part_banks[i].nums);
- }
- }
-#else
- printk(KERN_NOTICE MSG_PREFIX
- "Registering %d flash banks at once\n", devicesfound);
-
- for (i = 0; i < devicesfound; i++) {
- add_mtd_device(sbc8240_mtd[i]);
- }
-#endif /* CONFIG_MTD_PARTITIONS */
-
- return devicesfound == 0 ? -ENXIO : 0;
-}
-
-static void __exit cleanup_sbc8240_mtd (void)
-{
- int i;
-
- for (i = 0; i < NUM_FLASH_BANKS; i++) {
- if (sbc8240_mtd[i]) {
- del_mtd_device (sbc8240_mtd[i]);
- map_destroy (sbc8240_mtd[i]);
- }
- if (sbc8240_map[i].map_priv_1) {
- iounmap ((void *) sbc8240_map[i].map_priv_1);
- sbc8240_map[i].map_priv_1 = 0;
- }
- }
-}
-
-module_init (init_sbc8240_mtd);
-module_exit (cleanup_sbc8240_mtd);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>");
-MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards");
-
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index d4314fb88212..35009294b435 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -89,7 +89,11 @@ static int __init uclinux_mtd_init(void)
mtd->priv = mapp;
uclinux_ram_mtdinfo = mtd;
+#ifdef CONFIG_MTD_PARTITIONS
add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS);
+#else
+ add_mtd_device(mtd);
+#endif
return(0);
}
@@ -99,7 +103,11 @@ static int __init uclinux_mtd_init(void)
static void __exit uclinux_mtd_cleanup(void)
{
if (uclinux_ram_mtdinfo) {
+#ifdef CONFIG_MTD_PARTITIONS
del_mtd_partitions(uclinux_ram_mtdinfo);
+#else
+ del_mtd_device(uclinux_ram_mtdinfo);
+#endif
map_destroy(uclinux_ram_mtdinfo);
uclinux_ram_mtdinfo = NULL;
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.