aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/lpc32xx_slc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/lpc32xx_slc.c')
-rw-r--r--drivers/mtd/nand/lpc32xx_slc.c42
1 files changed, 23 insertions, 19 deletions
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index abfec13868e5..4f3d4eb17da0 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -94,22 +94,25 @@
/**********************************************************************
* slc_tac register definitions
**********************************************************************/
+/* Computation of clock cycles on basis of controller and device clock rates */
+#define SLCTAC_CLOCKS(c, n, s) (min_t(u32, DIV_ROUND_UP(c, n) - 1, 0xF) << s)
+
/* Clock setting for RDY write sample wait time in 2*n clocks */
#define SLCTAC_WDR(n) (((n) & 0xF) << 28)
/* Write pulse width in clock cycles, 1 to 16 clocks */
-#define SLCTAC_WWIDTH(n) (((n) & 0xF) << 24)
+#define SLCTAC_WWIDTH(c, n) (SLCTAC_CLOCKS(c, n, 24))
/* Write hold time of control and data signals, 1 to 16 clocks */
-#define SLCTAC_WHOLD(n) (((n) & 0xF) << 20)
+#define SLCTAC_WHOLD(c, n) (SLCTAC_CLOCKS(c, n, 20))
/* Write setup time of control and data signals, 1 to 16 clocks */
-#define SLCTAC_WSETUP(n) (((n) & 0xF) << 16)
+#define SLCTAC_WSETUP(c, n) (SLCTAC_CLOCKS(c, n, 16))
/* Clock setting for RDY read sample wait time in 2*n clocks */
#define SLCTAC_RDR(n) (((n) & 0xF) << 12)
/* Read pulse width in clock cycles, 1 to 16 clocks */
-#define SLCTAC_RWIDTH(n) (((n) & 0xF) << 8)
+#define SLCTAC_RWIDTH(c, n) (SLCTAC_CLOCKS(c, n, 8))
/* Read hold time of control and data signals, 1 to 16 clocks */
-#define SLCTAC_RHOLD(n) (((n) & 0xF) << 4)
+#define SLCTAC_RHOLD(c, n) (SLCTAC_CLOCKS(c, n, 4))
/* Read setup time of control and data signals, 1 to 16 clocks */
-#define SLCTAC_RSETUP(n) (((n) & 0xF) << 0)
+#define SLCTAC_RSETUP(c, n) (SLCTAC_CLOCKS(c, n, 0))
/**********************************************************************
* slc_ecc register definitions
@@ -240,13 +243,13 @@ static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
/* Compute clock setup values */
tmp = SLCTAC_WDR(host->ncfg->wdr_clks) |
- SLCTAC_WWIDTH(1 + (clkrate / host->ncfg->wwidth)) |
- SLCTAC_WHOLD(1 + (clkrate / host->ncfg->whold)) |
- SLCTAC_WSETUP(1 + (clkrate / host->ncfg->wsetup)) |
+ SLCTAC_WWIDTH(clkrate, host->ncfg->wwidth) |
+ SLCTAC_WHOLD(clkrate, host->ncfg->whold) |
+ SLCTAC_WSETUP(clkrate, host->ncfg->wsetup) |
SLCTAC_RDR(host->ncfg->rdr_clks) |
- SLCTAC_RWIDTH(1 + (clkrate / host->ncfg->rwidth)) |
- SLCTAC_RHOLD(1 + (clkrate / host->ncfg->rhold)) |
- SLCTAC_RSETUP(1 + (clkrate / host->ncfg->rsetup));
+ SLCTAC_RWIDTH(clkrate, host->ncfg->rwidth) |
+ SLCTAC_RHOLD(clkrate, host->ncfg->rhold) |
+ SLCTAC_RSETUP(clkrate, host->ncfg->rsetup);
writel(tmp, SLC_TAC(host->io_base));
}
@@ -660,7 +663,8 @@ static int lpc32xx_nand_read_page_raw_syndrome(struct mtd_info *mtd,
*/
static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+ const uint8_t *buf,
+ int oob_required, int page)
{
struct lpc32xx_nand_host *host = chip->priv;
uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
@@ -689,7 +693,7 @@ static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf,
- int oob_required)
+ int oob_required, int page)
{
/* Raw writes can just use the FIFO interface */
chip->write_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
@@ -810,7 +814,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
res = -ENOENT;
goto err_exit1;
}
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
/* Set NAND IO addresses and command/ready functions */
chip->IO_ADDR_R = SLC_DATA(host->io_base);
@@ -915,7 +919,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
err_exit3:
dma_release_channel(host->dma_chan);
err_exit2:
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
err_exit1:
lpc32xx_wp_enable(host);
@@ -939,7 +943,7 @@ static int lpc32xx_nand_remove(struct platform_device *pdev)
tmp &= ~SLCCFG_CE_LOW;
writel(tmp, SLC_CTRL(host->io_base));
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
lpc32xx_wp_enable(host);
return 0;
@@ -951,7 +955,7 @@ static int lpc32xx_nand_resume(struct platform_device *pdev)
struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
/* Re-enable NAND clock */
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
/* Fresh init of NAND controller */
lpc32xx_nand_setup(host);
@@ -976,7 +980,7 @@ static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
lpc32xx_wp_enable(host);
/* Disable clock */
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
return 0;
}