1 files changed, 33 insertions, 55 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index f2c8ff398d6c..557b8462f55e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -313,13 +313,12 @@ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
  * nand_block_bad - [DEFAULT] Read bad block marker from the chip
  * @mtd: MTD device structure
  * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
  *
  * Check, if the block is bad.
  */
-static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs)
 {
-	int page, chipnr, res = 0, i = 0;
+	int page, res = 0, i = 0;
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	u16 bad;
 
@@ -328,15 +327,6 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
 
-	if (getchip) {
-		chipnr = (int)(ofs >> chip->chip_shift);
-
-		nand_get_device(mtd, FL_READING);
-
-		/* Select the NAND device */
-		chip->select_chip(mtd, chipnr);
-	}
-
 	do {
 		if (chip->options & NAND_BUSWIDTH_16) {
 			chip->cmdfunc(mtd, NAND_CMD_READOOB,
@@ -361,11 +351,6 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 		i++;
 	} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
 
-	if (getchip) {
-		chip->select_chip(mtd, -1);
-		nand_release_device(mtd);
-	}
-
 	return res;
 }
 
@@ -503,19 +488,17 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
  * nand_block_checkbad - [GENERIC] Check if a block is marked bad
  * @mtd: MTD device structure
  * @ofs: offset from device start
- * @getchip: 0, if the chip is already selected
  * @allowbbt: 1, if its allowed to access the bbt area
  *
  * Check, if the block is bad. Either by reading the bad block table or
  * calling of the scan function.
  */
-static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
-			       int allowbbt)
+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 
 	if (!chip->bbt)
-		return chip->block_bad(mtd, ofs, getchip);
+		return chip->block_bad(mtd, ofs);
 
 	/* Return info from the table */
 	return nand_isbad_bbt(mtd, ofs, allowbbt);
@@ -566,8 +549,8 @@ void nand_wait_ready(struct mtd_info *mtd)
 		cond_resched();
 	} while (time_before(jiffies, timeo));
 
-	pr_warn_ratelimited(
-		"timeout while waiting for chip to become ready\n");
+	if (!chip->dev_ready(mtd))
+		pr_warn_ratelimited("timeout while waiting for chip to become ready\n");
 out:
 	led_trigger_event(nand_led_trigger, LED_OFF);
 }
@@ -1723,8 +1706,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 	int ret = 0;
 	uint32_t readlen = ops->len;
 	uint32_t oobreadlen = ops->ooblen;
-	uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
-		mtd->oobavail : mtd->oobsize;
+	uint32_t max_oobsize = mtd_oobavail(mtd, ops);
 
 	uint8_t *bufpoi, *oob, *buf;
 	int use_bufpoi;
@@ -2075,10 +2057,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 
 	stats = mtd->ecc_stats;
 
-	if (ops->mode == MTD_OPS_AUTO_OOB)
-		len = chip->ecc.layout->oobavail;
-	else
-		len = mtd->oobsize;
+	len = mtd_oobavail(mtd, ops);
 
 	if (unlikely(ops->ooboffs >= len)) {
 		pr_debug("%s: attempt to start read outside oob\n",
@@ -2575,8 +2554,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 	uint32_t writelen = ops->len;
 
 	uint32_t oobwritelen = ops->ooblen;
-	uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
-				mtd->oobavail : mtd->oobsize;
+	uint32_t oobmaxlen = mtd_oobavail(mtd, ops);
 
 	uint8_t *oob = ops->oobbuf;
 	uint8_t *buf = ops->datbuf;
@@ -2766,10 +2744,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 	pr_debug("%s: to = 0x%08x, len = %i\n",
 			 __func__, (unsigned int)to, (int)ops->ooblen);
 
-	if (ops->mode == MTD_OPS_AUTO_OOB)
-		len = chip->ecc.layout->oobavail;
-	else
-		len = mtd->oobsize;
+	len = mtd_oobavail(mtd, ops);
 
 	/* Do not allow write past end of page */
 	if ((ops->ooboffs + ops->ooblen) > len) {
@@ -2957,7 +2932,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 	while (len) {
 		/* Check if we have a bad block, we do not erase bad blocks! */
 		if (nand_block_checkbad(mtd, ((loff_t) page) <<
-					chip->page_shift, 0, allowbbt)) {
+					chip->page_shift, allowbbt)) {
 			pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
 				    __func__, page);
 			instr->state = MTD_ERASE_FAILED;
@@ -3044,7 +3019,20 @@ static void nand_sync(struct mtd_info *mtd)
  */
 static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
 {
-	return nand_block_checkbad(mtd, offs, 1, 0);
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	int chipnr = (int)(offs >> chip->chip_shift);
+	int ret;
+
+	/* Select the NAND device */
+	nand_get_device(mtd, FL_READING);
+	chip->select_chip(mtd, chipnr);
+
+	ret = nand_block_checkbad(mtd, offs, 0);
+
+	chip->select_chip(mtd, -1);
+	nand_release_device(mtd);
+
+	return ret;
 }
 
 /**
@@ -4021,7 +4009,6 @@ static int nand_dt_init(struct nand_chip *chip)
  * This is the first phase of the normal nand_scan() function. It reads the
  * flash ID and sets up MTD fields accordingly.
  *
- * The mtd->owner field must be set to the module of the caller.
  */
 int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 		    struct nand_flash_dev *table)
@@ -4287,10 +4274,8 @@ int nand_scan_tail(struct mtd_info *mtd)
 		}
 
 		/* See nand_bch_init() for details. */
-		ecc->bytes = DIV_ROUND_UP(
-				ecc->strength * fls(8 * ecc->size), 8);
-		ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
-					       &ecc->layout);
+		ecc->bytes = 0;
+		ecc->priv = nand_bch_init(mtd);
 		if (!ecc->priv) {
 			pr_warn("BCH ECC initialization failed!\n");
 			BUG();
@@ -4325,11 +4310,11 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 * The number of bytes available for a client to place data into
 	 * the out of band area.
 	 */
-	ecc->layout->oobavail = 0;
-	for (i = 0; ecc->layout->oobfree[i].length
-			&& i < ARRAY_SIZE(ecc->layout->oobfree); i++)
-		ecc->layout->oobavail += ecc->layout->oobfree[i].length;
-	mtd->oobavail = ecc->layout->oobavail;
+	mtd->oobavail = 0;
+	if (ecc->layout) {
+		for (i = 0; ecc->layout->oobfree[i].length; i++)
+			mtd->oobavail += ecc->layout->oobfree[i].length;
+	}
 
 	/* ECC sanity check: warn if it's too weak */
 	if (!nand_ecc_strength_good(mtd))
@@ -4443,19 +4428,12 @@ EXPORT_SYMBOL(nand_scan_tail);
  *
  * This fills out all the uninitialized function pointers with the defaults.
  * The flash ID is read and the mtd/chip structures are filled with the
- * appropriate values. The mtd->owner field must be set to the module of the
- * caller.
+ * appropriate values.
  */
 int nand_scan(struct mtd_info *mtd, int maxchips)
 {
 	int ret;
 
-	/* Many callers got this wrong, so check for it for a while... */
-	if (!mtd->owner && caller_is_module()) {
-		pr_crit("%s called with NULL mtd->owner!\n", __func__);
-		BUG();
-	}
-
 	ret = nand_scan_ident(mtd, maxchips, NULL);
 	if (!ret)
 		ret = nand_scan_tail(mtd);