aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/spia.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/spia.c')
-rw-r--r--drivers/mtd/nand/spia.c173
1 files changed, 173 insertions, 0 deletions
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
new file mode 100644
index 000000000000..b777c412b758
--- /dev/null
+++ b/drivers/mtd/nand/spia.c
@@ -0,0 +1,173 @@
+/*
+ * drivers/mtd/nand/spia.c
+ *
+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ *
+ *
+ * 10-29-2001 TG change to support hardwarespecific access
+ * to controllines (due to change in nand.c)
+ * page_cache added
+ *
+ * $Id: spia.c,v 1.24 2004/11/04 12:53:10 gleixner Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash device found on the
+ * SPIA board which utilizes the Toshiba TC58V64AFT part. This is
+ * a 64Mibit (8MiB x 8 bits) NAND flash device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+
+/*
+ * MTD structure for SPIA board
+ */
+static struct mtd_info *spia_mtd = NULL;
+
+/*
+ * Values specific to the SPIA board (used with EP7212 processor)
+ */
+#define SPIA_IO_BASE 0xd0000000 /* Start of EP7212 IO address space */
+#define SPIA_FIO_BASE 0xf0000000 /* Address where flash is mapped */
+#define SPIA_PEDR 0x0080 /*
+ * IO offset to Port E data register
+ * where the CLE, ALE and NCE pins
+ * are wired to.
+ */
+#define SPIA_PEDDR 0x00c0 /*
+ * IO offset to Port E data direction
+ * register so we can control the IO
+ * lines.
+ */
+
+/*
+ * Module stuff
+ */
+
+static int spia_io_base = SPIA_IO_BASE;
+static int spia_fio_base = SPIA_FIO_BASE;
+static int spia_pedr = SPIA_PEDR;
+static int spia_peddr = SPIA_PEDDR;
+
+module_param(spia_io_base, int, 0);
+module_param(spia_fio_base, int, 0);
+module_param(spia_pedr, int, 0);
+module_param(spia_peddr, int, 0);
+
+/*
+ * Define partitions for flash device
+ */
+const static struct mtd_partition partition_info[] = {
+ {
+ .name = "SPIA flash partition 1",
+ .offset = 0,
+ .size = 2*1024*1024
+ },
+ {
+ .name = "SPIA flash partition 2",
+ .offset = 2*1024*1024,
+ .size = 6*1024*1024
+ }
+};
+#define NUM_PARTITIONS 2
+
+
+/*
+ * hardware specific access to control-lines
+*/
+static void spia_hwcontrol(struct mtd_info *mtd, int cmd){
+
+ switch(cmd){
+
+ case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x01; break;
+ case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break;
+
+ case NAND_CTL_SETALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x02; break;
+ case NAND_CTL_CLRALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x02; break;
+
+ case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break;
+ case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x04; break;
+ }
+}
+
+/*
+ * Main initialization routine
+ */
+int __init spia_init (void)
+{
+ struct nand_chip *this;
+
+ /* Allocate memory for MTD device structure and private data */
+ spia_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip),
+ GFP_KERNEL);
+ if (!spia_mtd) {
+ printk ("Unable to allocate SPIA NAND MTD device structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *) (&spia_mtd[1]);
+
+ /* Initialize structures */
+ memset((char *) spia_mtd, 0, sizeof(struct mtd_info));
+ memset((char *) this, 0, sizeof(struct nand_chip));
+
+ /* Link the private data with the MTD structure */
+ spia_mtd->priv = this;
+
+ /*
+ * Set GPIO Port E control register so that the pins are configured
+ * to be outputs for controlling the NAND flash.
+ */
+ (*(volatile unsigned char *) (spia_io_base + spia_peddr)) = 0x07;
+
+ /* Set address of NAND IO lines */
+ this->IO_ADDR_R = (void __iomem *) spia_fio_base;
+ this->IO_ADDR_W = (void __iomem *) spia_fio_base;
+ /* Set address of hardware control function */
+ this->hwcontrol = spia_hwcontrol;
+ /* 15 us command delay time */
+ this->chip_delay = 15;
+
+ /* Scan to find existence of the device */
+ if (nand_scan (spia_mtd, 1)) {
+ kfree (spia_mtd);
+ return -ENXIO;
+ }
+
+ /* Register the partitions */
+ add_mtd_partitions(spia_mtd, partition_info, NUM_PARTITIONS);
+
+ /* Return happy */
+ return 0;
+}
+module_init(spia_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit spia_cleanup (void)
+{
+ /* Release resources, unregister device */
+ nand_release (spia_mtd);
+
+ /* Free the MTD device structure */
+ kfree (spia_mtd);
+}
+module_exit(spia_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on SPIA board");