diff options
Diffstat (limited to 'drivers/mtd/spi-nor/spi-nor.c')
| -rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 1507 |
1 files changed, 933 insertions, 574 deletions
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 9407ca5f9443..6e13bbd1aaa5 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c * * Copyright (C) 2005, Intec Automation Inc. * Copyright (C) 2014, Freescale Semiconductor, Inc. - * - * This code is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/err.h> @@ -42,6 +39,197 @@ #define SPI_NOR_MAX_ID_LEN 6 #define SPI_NOR_MAX_ADDR_WIDTH 4 +struct spi_nor_read_command { + u8 num_mode_clocks; + u8 num_wait_states; + u8 opcode; + enum spi_nor_protocol proto; +}; + +struct spi_nor_pp_command { + u8 opcode; + enum spi_nor_protocol proto; +}; + +enum spi_nor_read_command_index { + SNOR_CMD_READ, + SNOR_CMD_READ_FAST, + SNOR_CMD_READ_1_1_1_DTR, + + /* Dual SPI */ + SNOR_CMD_READ_1_1_2, + SNOR_CMD_READ_1_2_2, + SNOR_CMD_READ_2_2_2, + SNOR_CMD_READ_1_2_2_DTR, + + /* Quad SPI */ + SNOR_CMD_READ_1_1_4, + SNOR_CMD_READ_1_4_4, + SNOR_CMD_READ_4_4_4, + SNOR_CMD_READ_1_4_4_DTR, + + /* Octo SPI */ + SNOR_CMD_READ_1_1_8, + SNOR_CMD_READ_1_8_8, + SNOR_CMD_READ_8_8_8, + SNOR_CMD_READ_1_8_8_DTR, + + SNOR_CMD_READ_MAX +}; + +enum spi_nor_pp_command_index { + SNOR_CMD_PP, + + /* Quad SPI */ + SNOR_CMD_PP_1_1_4, + SNOR_CMD_PP_1_4_4, + SNOR_CMD_PP_4_4_4, + + /* Octo SPI */ + SNOR_CMD_PP_1_1_8, + SNOR_CMD_PP_1_8_8, + SNOR_CMD_PP_8_8_8, + + SNOR_CMD_PP_MAX +}; + +struct spi_nor_flash_parameter { + u64 size; + u32 page_size; + + struct spi_nor_hwcaps hwcaps; + struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; + struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; + + int (*quad_enable)(struct spi_nor *nor); +}; + +struct sfdp_parameter_header { + u8 id_lsb; + u8 minor; + u8 major; + u8 length; /* in double words */ + u8 parameter_table_pointer[3]; /* byte address */ + u8 id_msb; +}; + +#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb) +#define SFDP_PARAM_HEADER_PTP(p) \ + (((p)->parameter_table_pointer[2] << 16) | \ + ((p)->parameter_table_pointer[1] << 8) | \ + ((p)->parameter_table_pointer[0] << 0)) + +#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */ +#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */ +#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */ + +#define SFDP_SIGNATURE 0x50444653U +#define SFDP_JESD216_MAJOR 1 +#define SFDP_JESD216_MINOR 0 +#define SFDP_JESD216A_MINOR 5 +#define SFDP_JESD216B_MINOR 6 + +struct sfdp_header { + u32 signature; /* Ox50444653U <=> "SFDP" */ + u8 minor; + u8 major; + u8 nph; /* 0-base number of parameter headers */ + u8 unused; + + /* Basic Flash Parameter Table. */ + struct sfdp_parameter_header bfpt_header; +}; + +/* Basic Flash Parameter Table */ + +/* + * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs. + * They are indexed from 1 but C arrays are indexed from 0. + */ +#define BFPT_DWORD(i) ((i) - 1) +#define BFPT_DWORD_MAX 16 + +/* The first version of JESB216 defined only 9 DWORDs. */ +#define BFPT_DWORD_MAX_JESD216 9 + +/* 1st DWORD. */ +#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16) +#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17) +#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17) +#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17) +#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17) +#define BFPT_DWORD1_DTR BIT(19) +#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20) +#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21) +#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22) + +/* 5th DWORD. */ +#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0) +#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4) + +/* 11th DWORD. */ +#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4 +#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4) + +/* 15th DWORD. */ + +/* + * (from JESD216 rev B) + * Quad Enable Requirements (QER): + * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4 + * reads based on instruction. DQ3/HOLD# functions are hold during + * instruction phase. + * - 001b: QE is bit 1 of status register 2. It is set via Write Status with + * two data bytes where bit 1 of the second byte is one. + * [...] + * Writing only one byte to the status register has the side-effect of + * clearing status register 2, including the QE bit. The 100b code is + * used if writing one byte to the status register does not modify + * status register 2. + * - 010b: QE is bit 6 of status register 1. It is set via Write Status with + * one data byte where bit 6 is one. + * [...] + * - 011b: QE is bit 7 of status register 2. It is set via Write status + * register 2 instruction 3Eh with one data byte where bit 7 is one. + * [...] + * The status register 2 is read using instruction 3Fh. + * - 100b: QE is bit 1 of status register 2. It is set via Write Status with + * two data bytes where bit 1 of the second byte is one. + * [...] + * In contrast to the 001b code, writing one byte to the status + * register does not modify status register 2. + * - 101b: QE is bit 1 of status register 2. Status register 1 is read using + * Read Status instruction 05h. Status register2 is read using + * instruction 35h. QE is set via Writ Status instruction 01h with + * two data bytes where bit 1 of the second byte is one. + * [...] + */ +#define BFPT_DWORD15_QER_MASK GENMASK(22, 20) +#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */ +#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20) +#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */ +#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20) +#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20) +#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */ + +struct sfdp_bfpt { + u32 dwords[BFPT_DWORD_MAX]; +}; + +/** + * struct spi_nor_fixups - SPI NOR fixup hooks + * @post_bfpt: called after the BFPT table has been parsed + * + * Those hooks can be used to tweak the SPI NOR configuration when the SFDP + * table is broken or not available. + */ +struct spi_nor_fixups { + int (*post_bfpt)(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params); +}; + struct flash_info { char *name; @@ -91,13 +279,14 @@ struct flash_info { #define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */ #define USE_CLSR BIT(14) /* use CLSR command */ + /* Part specific fixup hooks. */ + const struct spi_nor_fixups *fixups; + int (*quad_enable)(struct spi_nor *nor); }; #define JEDEC_MFR(info) ((info)->id[0]) -static const struct flash_info *spi_nor_match_id(const char *name); - /* * Read the status register, returning its value in the location * Return the status register value. @@ -159,7 +348,7 @@ static int read_cr(struct spi_nor *nor) * Write status register 1 byte * Returns negative if error occurred. */ -static inline int write_sr(struct spi_nor *nor, u8 val) +static int write_sr(struct spi_nor *nor, u8 val) { nor->cmd_buf[0] = val; return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); @@ -169,7 +358,7 @@ static inline int write_sr(struct spi_nor *nor, u8 val) * Set write enable latch with Write Enable command. * Returns negative if error occurred. */ -static inline int write_enable(struct spi_nor *nor) +static int write_enable(struct spi_nor *nor) { return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); } @@ -177,12 +366,12 @@ static inline int write_enable(struct spi_nor *nor) /* * Send write disable instruction to the chip. */ -static inline int write_disable(struct spi_nor *nor) +static int write_disable(struct spi_nor *nor) { return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0); } -static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) +static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) { return mtd->priv; } @@ -200,7 +389,7 @@ static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size) return opcode; } -static inline u8 spi_nor_convert_3to4_read(u8 opcode) +static u8 spi_nor_convert_3to4_read(u8 opcode) { static const u8 spi_nor_3to4_read[][2] = { { SPINOR_OP_READ, SPINOR_OP_READ_4B }, @@ -219,7 +408,7 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode) ARRAY_SIZE(spi_nor_3to4_read)); } -static inline u8 spi_nor_convert_3to4_program(u8 opcode) +static u8 spi_nor_convert_3to4_program(u8 opcode) { static const u8 spi_nor_3to4_program[][2] = { { SPINOR_OP_PP, SPINOR_OP_PP_4B }, @@ -231,7 +420,7 @@ static inline u8 spi_nor_convert_3to4_program(u8 opcode) ARRAY_SIZE(spi_nor_3to4_program)); } -static inline u8 spi_nor_convert_3to4_erase(u8 opcode) +static u8 spi_nor_convert_3to4_erase(u8 opcode) { static const u8 spi_nor_3to4_erase[][2] = { { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B }, @@ -243,15 +432,14 @@ static inline u8 spi_nor_convert_3to4_erase(u8 opcode) ARRAY_SIZE(spi_nor_3to4_erase)); } -static void spi_nor_set_4byte_opcodes(struct spi_nor *nor, - const struct flash_info *info) +static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) { /* Do some manufacturer fixups first */ - switch (JEDEC_MFR(info)) { + switch (JEDEC_MFR(nor->info)) { case SNOR_MFR_SPANSION: /* No small sector erase for 4-byte command set */ nor->erase_opcode = SPINOR_OP_SE; - nor->mtd.erasesize = info->sector_size; + nor->mtd.erasesize = nor->info->sector_size; break; default: @@ -276,17 +464,18 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor, } /* Enable/disable 4-byte addressing mode. */ -static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, - int enable) +static int set_4byte(struct spi_nor *nor, bool enable) { int status; bool need_wren = false; u8 cmd; - switch (JEDEC_MFR(info)) { + switch (JEDEC_MFR(nor->info)) { + case SNOR_MFR_ST: case SNOR_MFR_MICRON: /* Some Micron need WREN command; all will accept it */ need_wren = true; + /* fall through */ case SNOR_MFR_MACRONIX: case SNOR_MFR_WINBOND: if (need_wren) @@ -298,7 +487,7 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, write_disable(nor); if (!status && !enable && - JEDEC_MFR(info) == SNOR_MFR_WINBOND) { + JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) { /* * On Winbond W25Q256FV, leaving 4byte mode causes * the Extended Address Register to be set to 1, so all @@ -333,7 +522,7 @@ static int s3an_sr_ready(struct spi_nor *nor) return !!(val & XSR_RDY); } -static inline int spi_nor_sr_ready(struct spi_nor *nor) +static int spi_nor_sr_ready(struct spi_nor *nor) { int sr = read_sr(nor); if (sr < 0) @@ -352,7 +541,7 @@ static inline int spi_nor_sr_ready(struct spi_nor *nor) return !(sr & SR_WIP); } -static inline int spi_nor_fsr_ready(struct spi_nor *nor) +static int spi_nor_fsr_ready(struct spi_nor *nor) { int fsr = read_fsr(nor); if (fsr < 0) @@ -1200,7 +1389,247 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } -static int macronix_quad_enable(struct spi_nor *nor); +/* + * Write status Register and configuration register with 2 bytes + * The first byte will be written to the status register, while the + * second byte will be written to the configuration register. + * Return negative if error occurred. + */ +static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr) +{ + int ret; + + write_enable(nor); + + ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); + if (ret < 0) { + dev_err(nor->dev, + "error while writing configuration register\n"); + return -EINVAL; + } + + ret = spi_nor_wait_till_ready(nor); + if (ret) { + dev_err(nor->dev, + "timeout while writing configuration register\n"); + return ret; + } + + return 0; +} + +/** + * macronix_quad_enable() - set QE bit in Status Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Status Register. + * + * bit 6 of the Status Register is the QE bit for Macronix like QSPI memories. + * + * Return: 0 on success, -errno otherwise. + */ +static int macronix_quad_enable(struct spi_nor *nor) +{ + int ret, val; + + val = read_sr(nor); + if (val < 0) + return val; + if (val & SR_QUAD_EN_MX) + return 0; + + write_enable(nor); + + write_sr(nor, val | SR_QUAD_EN_MX); + + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + ret = read_sr(nor); + if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) { + dev_err(nor->dev, "Macronix Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +/** + * spansion_quad_enable() - set QE bit in Configuraiton Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Configuration Register. + * This function is kept for legacy purpose because it has been used for a + * long time without anybody complaining but it should be considered as + * deprecated and maybe buggy. + * First, this function doesn't care about the previous values of the Status + * and Configuration Registers when it sets the QE bit (bit 1) in the + * Configuration Register: all other bits are cleared, which may have unwanted + * side effects like removing some block protections. + * Secondly, it uses the Read Configuration Register (35h) instruction though + * some very old and few memories don't support this instruction. If a pull-up + * resistor is present on the MISO/IO1 line, we might still be able to pass the + * "read back" test because the QSPI memory doesn't recognize the command, + * so leaves the MISO/IO1 line state unchanged, hence read_cr() returns 0xFF. + * + * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI + * memories. + * + * Return: 0 on success, -errno otherwise. + */ +static int spansion_quad_enable(struct spi_nor *nor) +{ + u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN}; + int ret; + + ret = write_sr_cr(nor, sr_cr); + if (ret) + return ret; + + /* read back and check it */ + ret = read_cr(nor); + if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { + dev_err(nor->dev, "Spansion Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +/** + * spansion_no_read_cr_quad_enable() - set QE bit in Configuration Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Configuration Register. + * This function should be used with QSPI memories not supporting the Read + * Configuration Register (35h) instruction. + * + * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI + * memories. + * + * Return: 0 on success, -errno otherwise. + */ +static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) +{ + u8 sr_cr[2]; + int ret; + + /* Keep the current value of the Status Register. */ + ret = read_sr(nor); + if (ret < 0) { + dev_err(nor->dev, "error while reading status register\n"); + return -EINVAL; + } + sr_cr[0] = ret; + sr_cr[1] = CR_QUAD_EN_SPAN; + + return write_sr_cr(nor, sr_cr); +} + +/** + * spansion_read_cr_quad_enable() - set QE bit in Configuration Register. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Configuration Register. + * This function should be used with QSPI memories supporting the Read + * Configuration Register (35h) instruction. + * + * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI + * memories. + * + * Return: 0 on success, -errno otherwise. + */ +static int spansion_read_cr_quad_enable(struct spi_nor *nor) +{ + struct device *dev = nor->dev; + u8 sr_cr[2]; + int ret; + + /* Check current Quad Enable bit value. */ + ret = read_cr(nor); + if (ret < 0) { + dev_err(dev, "error while reading configuration register\n"); + return -EINVAL; + } + + if (ret & CR_QUAD_EN_SPAN) + return 0; + + sr_cr[1] = ret | CR_QUAD_EN_SPAN; + + /* Keep the current value of the Status Register. */ + ret = read_sr(nor); + if (ret < 0) { + dev_err(dev, "error while reading status register\n"); + return -EINVAL; + } + sr_cr[0] = ret; + + ret = write_sr_cr(nor, sr_cr); + if (ret) + return ret; + + /* Read back and check it. */ + ret = read_cr(nor); + if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { + dev_err(nor->dev, "Spansion Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} + +/** + * sr2_bit7_quad_enable() - set QE bit in Status Register 2. + * @nor: pointer to a 'struct spi_nor' + * + * Set the Quad Enable (QE) bit in the Status Register 2. + * + * This is one of the procedures to set the QE bit described in the SFDP + * (JESD216 rev B) specification but no manufacturer using this procedure has + * been identified yet, hence the name of the function. + * + * Return: 0 on success, -errno otherwise. + */ +static int sr2_bit7_quad_enable(struct spi_nor *nor) +{ + u8 sr2; + int ret; + + /* Check current Quad Enable bit value. */ + ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); + if (ret) + return ret; + if (sr2 & SR2_QUAD_EN_BIT7) + return 0; + + /* Update the Quad Enable bit. */ + sr2 |= SR2_QUAD_EN_BIT7; + + write_enable(nor); + + ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1); + if (ret < 0) { + dev_err(nor->dev, "error while writing status register 2\n"); + return -EINVAL; + } + + ret = spi_nor_wait_till_ready(nor); + if (ret < 0) { + dev_err(nor->dev, "timeout while writing status register 2\n"); + return ret; + } + + /* Read back and check it. */ + ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); + if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) { + dev_err(nor->dev, "SR2 Quad bit not set\n"); + return -EINVAL; + } + + return 0; +} /* Used when the "_ext_id" is two bytes at most */ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ @@ -1252,6 +1681,31 @@ static int macronix_quad_enable(struct spi_nor *nor); .addr_width = 3, \ .flags = SPI_NOR_NO_FR | SPI_S3AN, +static int +mx25l25635_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + /* + * MX25L25635F supports 4B opcodes but MX25L25635E does not. + * Unfortunately, Macronix has re-used the same JEDEC ID for both + * variants which prevents us from defining a new entry in the parts + * table. + * We need a way to differentiate MX25L25635E and MX25L25635F, and it + * seems that the F version advertises support for Fast Read 4-4-4 in + * its BFPT table. + */ + if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4) + nor->flags |= SNOR_F_4B_OPCODES; + + return 0; +} + +static struct spi_nor_fixups mx25l25635_fixups = { + .post_bfpt = mx25l25635_post_bfpt_fixups, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -1352,12 +1806,19 @@ static const struct flash_info spi_nor_ids[] = { { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) }, { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "is25lp016d", INFO(0x9d6015, 0, 64 * 1024, 32, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "is25lp080d", INFO(0x9d6014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ) }, + { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128, + SECT_4K | SPI_NOR_DUAL_READ) }, { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ) }, { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512, - SECT_4K | SPI_NOR_DUAL_READ) }, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_4B_OPCODES) }, { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128, @@ -1380,7 +1841,11 @@ static const struct flash_info spi_nor_ids[] = { { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) + .fixups = &mx25l25635_fixups }, { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, @@ -1388,7 +1853,7 @@ static const struct flash_info spi_nor_ids[] = { { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, - /* Micron */ + /* Micron <--> ST Micro */ { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, @@ -1404,6 +1869,12 @@ static const struct flash_info spi_nor_ids[] = { { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + /* Micron */ + { + "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512, + SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES) + }, + /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, @@ -1531,6 +2002,11 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, @@ -1763,248 +2239,6 @@ write_err: return ret; } -/** - * macronix_quad_enable() - set QE bit in Status Register. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Status Register. - * - * bit 6 of the Status Register is the QE bit for Macronix like QSPI memories. - * - * Return: 0 on success, -errno otherwise. - */ -static int macronix_quad_enable(struct spi_nor *nor) -{ - int ret, val; - - val = read_sr(nor); - if (val < 0) - return val; - if (val & SR_QUAD_EN_MX) - return 0; - - write_enable(nor); - - write_sr(nor, val | SR_QUAD_EN_MX); - - ret = spi_nor_wait_till_ready(nor); - if (ret) - return ret; - - ret = read_sr(nor); - if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) { - dev_err(nor->dev, "Macronix Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -/* - * Write status Register and configuration register with 2 bytes - * The first byte will be written to the status register, while the - * second byte will be written to the configuration register. - * Return negative if error occurred. - */ -static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr) -{ - int ret; - - write_enable(nor); - - ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); - if (ret < 0) { - dev_err(nor->dev, - "error while writing configuration register\n"); - return -EINVAL; - } - - ret = spi_nor_wait_till_ready(nor); - if (ret) { - dev_err(nor->dev, - "timeout while writing configuration register\n"); - return ret; - } - - return 0; -} - -/** - * spansion_quad_enable() - set QE bit in Configuraiton Register. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Configuration Register. - * This function is kept for legacy purpose because it has been used for a - * long time without anybody complaining but it should be considered as - * deprecated and maybe buggy. - * First, this function doesn't care about the previous values of the Status - * and Configuration Registers when it sets the QE bit (bit 1) in the - * Configuration Register: all other bits are cleared, which may have unwanted - * side effects like removing some block protections. - * Secondly, it uses the Read Configuration Register (35h) instruction though - * some very old and few memories don't support this instruction. If a pull-up - * resistor is present on the MISO/IO1 line, we might still be able to pass the - * "read back" test because the QSPI memory doesn't recognize the command, - * so leaves the MISO/IO1 line state unchanged, hence read_cr() returns 0xFF. - * - * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI - * memories. - * - * Return: 0 on success, -errno otherwise. - */ -static int spansion_quad_enable(struct spi_nor *nor) -{ - u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN}; - int ret; - - ret = write_sr_cr(nor, sr_cr); - if (ret) - return ret; - - /* read back and check it */ - ret = read_cr(nor); - if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { - dev_err(nor->dev, "Spansion Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -/** - * spansion_no_read_cr_quad_enable() - set QE bit in Configuration Register. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Configuration Register. - * This function should be used with QSPI memories not supporting the Read - * Configuration Register (35h) instruction. - * - * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI - * memories. - * - * Return: 0 on success, -errno otherwise. - */ -static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) -{ - u8 sr_cr[2]; - int ret; - - /* Keep the current value of the Status Register. */ - ret = read_sr(nor); - if (ret < 0) { - dev_err(nor->dev, "error while reading status register\n"); - return -EINVAL; - } - sr_cr[0] = ret; - sr_cr[1] = CR_QUAD_EN_SPAN; - - return write_sr_cr(nor, sr_cr); -} - -/** - * spansion_read_cr_quad_enable() - set QE bit in Configuration Register. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Configuration Register. - * This function should be used with QSPI memories supporting the Read - * Configuration Register (35h) instruction. - * - * bit 1 of the Configuration Register is the QE bit for Spansion like QSPI - * memories. - * - * Return: 0 on success, -errno otherwise. - */ -static int spansion_read_cr_quad_enable(struct spi_nor *nor) -{ - struct device *dev = nor->dev; - u8 sr_cr[2]; - int ret; - - /* Check current Quad Enable bit value. */ - ret = read_cr(nor); - if (ret < 0) { - dev_err(dev, "error while reading configuration register\n"); - return -EINVAL; - } - - if (ret & CR_QUAD_EN_SPAN) - return 0; - - sr_cr[1] = ret | CR_QUAD_EN_SPAN; - - /* Keep the current value of the Status Register. */ - ret = read_sr(nor); - if (ret < 0) { - dev_err(dev, "error while reading status register\n"); - return -EINVAL; - } - sr_cr[0] = ret; - - ret = write_sr_cr(nor, sr_cr); - if (ret) - return ret; - - /* Read back and check it. */ - ret = read_cr(nor); - if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) { - dev_err(nor->dev, "Spansion Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - -/** - * sr2_bit7_quad_enable() - set QE bit in Status Register 2. - * @nor: pointer to a 'struct spi_nor' - * - * Set the Quad Enable (QE) bit in the Status Register 2. - * - * This is one of the procedures to set the QE bit described in the SFDP - * (JESD216 rev B) specification but no manufacturer using this procedure has - * been identified yet, hence the name of the function. - * - * Return: 0 on success, -errno otherwise. - */ -static int sr2_bit7_quad_enable(struct spi_nor *nor) -{ - u8 sr2; - int ret; - - /* Check current Quad Enable bit value. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); - if (ret) - return ret; - if (sr2 & SR2_QUAD_EN_BIT7) - return 0; - - /* Update the Quad Enable bit. */ - sr2 |= SR2_QUAD_EN_BIT7; - - write_enable(nor); - - ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1); - if (ret < 0) { - dev_err(nor->dev, "error while writing status register 2\n"); - return -EINVAL; - } - - ret = spi_nor_wait_till_ready(nor); - if (ret < 0) { - dev_err(nor->dev, "timeout while writing status register 2\n"); - return ret; - } - - /* Read back and check it. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); - if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) { - dev_err(nor->dev, "SR2 Quad bit not set\n"); - return -EINVAL; - } - - return 0; -} - static int spi_nor_check(struct spi_nor *nor) { if (!nor->dev || !nor->read || !nor->write || @@ -2016,7 +2250,7 @@ static int spi_nor_check(struct spi_nor *nor) return 0; } -static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor) +static int s3an_nor_scan(struct spi_nor *nor) { int ret; u8 val; @@ -2047,7 +2281,7 @@ static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor) /* Flash in Power of 2 mode */ nor->page_size = (nor->page_size == 264) ? 256 : 512; nor->mtd.writebufsize = nor->page_size; - nor->mtd.size = 8 * nor->page_size * info->n_sectors; + nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors; nor->mtd.erasesize = 8 * nor->page_size; } else { /* Flash in Default addressing mode */ @@ -2057,71 +2291,6 @@ static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor) return 0; } -struct spi_nor_read_command { - u8 num_mode_clocks; - u8 num_wait_states; - u8 opcode; - enum spi_nor_protocol proto; -}; - -struct spi_nor_pp_command { - u8 opcode; - enum spi_nor_protocol proto; -}; - -enum spi_nor_read_command_index { - SNOR_CMD_READ, - SNOR_CMD_READ_FAST, - SNOR_CMD_READ_1_1_1_DTR, - - /* Dual SPI */ - SNOR_CMD_READ_1_1_2, - SNOR_CMD_READ_1_2_2, - SNOR_CMD_READ_2_2_2, - SNOR_CMD_READ_1_2_2_DTR, - - /* Quad SPI */ - SNOR_CMD_READ_1_1_4, - SNOR_CMD_READ_1_4_4, - SNOR_CMD_READ_4_4_4, - SNOR_CMD_READ_1_4_4_DTR, - - /* Octo SPI */ - SNOR_CMD_READ_1_1_8, - SNOR_CMD_READ_1_8_8, - SNOR_CMD_READ_8_8_8, - SNOR_CMD_READ_1_8_8_DTR, - - SNOR_CMD_READ_MAX -}; - -enum spi_nor_pp_command_index { - SNOR_CMD_PP, - - /* Quad SPI */ - SNOR_CMD_PP_1_1_4, - SNOR_CMD_PP_1_4_4, - SNOR_CMD_PP_4_4_4, - - /* Octo SPI */ - SNOR_CMD_PP_1_1_8, - SNOR_CMD_PP_1_8_8, - SNOR_CMD_PP_8_8_8, - - SNOR_CMD_PP_MAX -}; - -struct spi_nor_flash_parameter { - u64 size; - u32 page_size; - - struct spi_nor_hwcaps hwcaps; - struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; - struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; - - int (*quad_enable)(struct spi_nor *nor); -}; - static void spi_nor_set_read_settings(struct spi_nor_read_command *read, u8 num_mode_clocks, @@ -2144,6 +2313,57 @@ spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, pp->proto = proto; } +static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size) +{ + size_t i; + + for (i = 0; i < size; i++) + if (table[i][0] == (int)hwcaps) + return table[i][1]; + + return -EINVAL; +} + +static int spi_nor_hwcaps_read2cmd(u32 hwcaps) +{ + static const int hwcaps_read2cmd[][2] = { + { SNOR_HWCAPS_READ, SNOR_CMD_READ }, + { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST }, + { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR }, + { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 }, + { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 }, + { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 }, + { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR }, + { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 }, + { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 }, + { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 }, + { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR }, + { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 }, + { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 }, + { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 }, + { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR }, + }; + + return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd, + ARRAY_SIZE(hwcaps_read2cmd)); +} + +static int spi_nor_hwcaps_pp2cmd(u32 hwcaps) +{ + static const int hwcaps_pp2cmd[][2] = { + { SNOR_HWCAPS_PP, SNOR_CMD_PP }, + { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 }, + { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 }, + { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 }, + { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 }, + { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 }, + { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 }, + }; + + return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd, + ARRAY_SIZE(hwcaps_pp2cmd)); +} + /* * Serial Flash Discoverable Parameters (SFDP) parsing. */ @@ -2156,7 +2376,7 @@ spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, * @nor: pointer to a 'struct spi_nor' * @addr: offset in the serial flash memory * @len: number of bytes to read - * @buf: buffer where the data is copied into + * @buf: buffer where the data is copied into (dma-safe memory) * * Return: 0 on success, -errno otherwise. */ @@ -2244,120 +2464,9 @@ static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr, return ret; } -struct sfdp_parameter_header { - u8 id_lsb; - u8 minor; - u8 major; - u8 length; /* in double words */ - u8 parameter_table_pointer[3]; /* byte address */ - u8 id_msb; -}; - -#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb) -#define SFDP_PARAM_HEADER_PTP(p) \ - (((p)->parameter_table_pointer[2] << 16) | \ - ((p)->parameter_table_pointer[1] << 8) | \ - ((p)->parameter_table_pointer[0] << 0)) - -#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */ -#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */ - -#define SFDP_SIGNATURE 0x50444653U -#define SFDP_JESD216_MAJOR 1 -#define SFDP_JESD216_MINOR 0 -#define SFDP_JESD216A_MINOR 5 -#define SFDP_JESD216B_MINOR 6 - -struct sfdp_header { - u32 signature; /* Ox50444653U <=> "SFDP" */ - u8 minor; - u8 major; - u8 nph; /* 0-base number of parameter headers */ - u8 unused; - - /* Basic Flash Parameter Table. */ - struct sfdp_parameter_header bfpt_header; -}; - -/* Basic Flash Parameter Table */ - -/* - * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs. - * They are indexed from 1 but C arrays are indexed from 0. - */ -#define BFPT_DWORD(i) ((i) - 1) -#define BFPT_DWORD_MAX 16 - -/* The first version of JESB216 defined only 9 DWORDs. */ -#define BFPT_DWORD_MAX_JESD216 9 - -/* 1st DWORD. */ -#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16) -#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17) -#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17) -#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17) -#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17) -#define BFPT_DWORD1_DTR BIT(19) -#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20) -#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21) -#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22) - -/* 5th DWORD. */ -#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0) -#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4) - -/* 11th DWORD. */ -#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4 -#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4) - -/* 15th DWORD. */ - -/* - * (from JESD216 rev B) - * Quad Enable Requirements (QER): - * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4 - * reads based on instruction. DQ3/HOLD# functions are hold during - * instruction phase. - * - 001b: QE is bit 1 of status register 2. It is set via Write Status with - * two data bytes where bit 1 of the second byte is one. - * [...] - * Writing only one byte to the status register has the side-effect of - * clearing status register 2, including the QE bit. The 100b code is - * used if writing one byte to the status register does not modify - * status register 2. - * - 010b: QE is bit 6 of status register 1. It is set via Write Status with - * one data byte where bit 6 is one. - * [...] - * - 011b: QE is bit 7 of status register 2. It is set via Write status - * register 2 instruction 3Eh with one data byte where bit 7 is one. - * [...] - * The status register 2 is read using instruction 3Fh. - * - 100b: QE is bit 1 of status register 2. It is set via Write Status with - * two data bytes where bit 1 of the second byte is one. - * [...] - * In contrast to the 001b code, writing one byte to the status - * register does not modify status register 2. - * - 101b: QE is bit 1 of status register 2. Status register 1 is read using - * Read Status instruction 05h. Status register2 is read using - * instruction 35h. QE is set via Writ Status instruction 01h with - * two data bytes where bit 1 of the second byte is one. - * [...] - */ -#define BFPT_DWORD15_QER_MASK GENMASK(22, 20) -#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */ -#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20) -#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */ -#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20) -#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20) -#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */ - -struct sfdp_bfpt { - u32 dwords[BFPT_DWORD_MAX]; -}; - /* Fast Read settings. */ -static inline void +static void spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read, u16 half, enum spi_nor_protocol proto) @@ -2464,8 +2573,6 @@ static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = { {BFPT_DWORD(9), 16}, }; -static int spi_nor_hwcaps_read2cmd(u32 hwcaps); - /** * spi_nor_set_erase_type() - set a SPI NOR erase type * @erase: pointer to a structure that describes a SPI NOR erase type @@ -2522,6 +2629,34 @@ static int spi_nor_map_cmp_erase_type(const void *l, const void *r) } /** + * spi_nor_sort_erase_mask() - sort erase mask + * @map: the erase map of the SPI NOR + * @erase_mask: the erase type mask to be sorted + * + * Replicate the sort done for the map's erase types in BFPT: sort the erase + * mask in ascending order with the smallest erase type size starting from + * BIT(0) in the sorted erase mask. + * + * Return: sorted erase mask. + */ +static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask) +{ + struct spi_nor_erase_type *erase_type = map->erase_type; + int i; + u8 sorted_erase_mask = 0; + + if (!erase_mask) + return 0; + + /* Replicate the sort done for the map's erase types. */ + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) + if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx)) + sorted_erase_mask |= BIT(i); + + return sorted_erase_mask; +} + +/** * spi_nor_regions_sort_erase_types() - sort erase types in each region * @map: the erase map of the SPI NOR * @@ -2536,19 +2671,13 @@ static int spi_nor_map_cmp_erase_type(const void *l, const void *r) static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map) { struct spi_nor_erase_region *region = map->regions; - struct spi_nor_erase_type *erase_type = map->erase_type; - int i; u8 region_erase_mask, sorted_erase_mask; while (region) { region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK; - /* Replicate the sort done for the map's erase types. */ - sorted_erase_mask = 0; - for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) - if (erase_type[i].size && - region_erase_mask & BIT(erase_type[i].idx)) - sorted_erase_mask |= BIT(i); + sorted_erase_mask = spi_nor_sort_erase_mask(map, + region_erase_mask); /* Overwrite erase mask. */ region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) | @@ -2576,6 +2705,19 @@ static void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map, map->uniform_erase_type = erase_mask; } +static int +spi_nor_post_bfpt_fixups(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + if (nor->info->fixups && nor->info->fixups->post_bfpt) + return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt, + params); + + return 0; +} + /** * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table. * @nor: pointer to a 'struct spi_nor' @@ -2728,7 +2870,8 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, /* Stop here if not JESD216 rev A or later. */ if (bfpt_header->length < BFPT_DWORD_MAX) - return 0; + return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, + params); /* Page size: this field specifies 'N' so the page size = 2^N bytes. */ params->page_size = bfpt.dwords[BFPT_DWORD(11)]; @@ -2763,7 +2906,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, return -EINVAL; } - return 0; + return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params); } #define SMPT_CMD_ADDRESS_LEN_MASK GENMASK(23, 22) @@ -2855,52 +2998,84 @@ static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings) * spi_nor_get_map_in_use() - get the configuration map in use * @nor: pointer to a 'struct spi_nor' * @smpt: pointer to the sector map parameter table + * @smpt_len: sector map parameter table length + * + * Return: pointer to the map in use, ERR_PTR(-errno) otherwise. */ -static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt) +static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt, + u8 smpt_len) { - const u32 *ret = NULL; - u32 i, addr; + const u32 *ret; + u8 *buf; + u32 addr; int err; + u8 i; u8 addr_width, read_opcode, read_dummy; - u8 read_data_mask, data_byte, map_id; + u8 read_data_mask, map_id; + + /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); addr_width = nor->addr_width; read_dummy = nor->read_dummy; read_opcode = nor->read_opcode; map_id = 0; - i = 0; /* Determine if there are any optional Detection Command Descriptors */ - while (!(smpt[i] & SMPT_DESC_TYPE_MAP)) { + for (i = 0; i < smpt_len; i += 2) { + if (smpt[i] & SMPT_DESC_TYPE_MAP) + break; + read_data_mask = SMPT_CMD_READ_DATA(smpt[i]); nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]); nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]); nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]); addr = smpt[i + 1]; - err = spi_nor_read_raw(nor, addr, 1, &data_byte); - if (err) + err = spi_nor_read_raw(nor, addr, 1, buf); + if (err) { + ret = ERR_PTR(err); goto out; + } /* * Build an index value that is used to select the Sector Map * Configuration that is currently in use. */ - map_id = map_id << 1 | !!(data_byte & read_data_mask); - i = i + 2; + map_id = map_id << 1 | !!(*buf & read_data_mask); } - /* Find the matching configuration map */ - while (SMPT_MAP_ID(smpt[i]) != map_id) { + /* + * If command descriptors are provided, they always precede map + * descriptors in the table. There is no need to start the iteration + * over smpt array all over again. + * + * Find the matching configuration map. + */ + ret = ERR_PTR(-EINVAL); + while (i < smpt_len) { + if (SMPT_MAP_ID(smpt[i]) == map_id) { + ret = smpt + i; + break; + } + + /* + * If there are no more configuration map descriptors and no + * configuration ID matched the configuration identifier, the + * sector address map is unknown. + */ if (smpt[i] & SMPT_DESC_END) - goto out; + break; + /* increment the table index to the next map */ i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1; } - ret = smpt + i; /* fall through */ out: + kfree(buf); nor->addr_width = addr_width; nor->read_dummy = read_dummy; nor->read_opcode = read_opcode; @@ -2941,12 +3116,13 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, const u32 *smpt) { struct spi_nor_erase_map *map = &nor->erase_map; - const struct spi_nor_erase_type *erase = map->erase_type; + struct spi_nor_erase_type *erase = map->erase_type; struct spi_nor_erase_region *region; u64 offset; u32 region_count; int i, j; - u8 erase_type; + u8 uniform_erase_type, save_uniform_erase_type; + u8 erase_type, regions_erase_type; region_count = SMPT_MAP_REGION_COUNT(*smpt); /* @@ -2959,7 +3135,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, return -ENOMEM; map->regions = region; - map->uniform_erase_type = 0xff; + uniform_erase_type = 0xff; + regions_erase_type = 0; offset = 0; /* Populate regions. */ for (i = 0; i < region_count; i++) { @@ -2974,12 +3151,40 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, * Save the erase types that are supported in all regions and * can erase the entire flash memory. */ - map->uniform_erase_type &= erase_type; + uniform_erase_type &= erase_type; + + /* + * regions_erase_type mask will indicate all the erase types + * supported in this configuration map. + */ + regions_erase_type |= erase_type; offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) + region[i].size; } + save_uniform_erase_type = map->uniform_erase_type; + map->uniform_erase_type = spi_nor_sort_erase_mask(map, + uniform_erase_type); + + if (!regions_erase_type) { + /* + * Roll back to the previous uniform_erase_type mask, SMPT is + * broken. + */ + map->uniform_erase_type = save_uniform_erase_type; + return -EINVAL; + } + + /* + * BFPT advertises all the erase types supported by all the possible + * map configurations. Mask out the erase types that are not supported + * by the current map configuration. + */ + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) + if (!(regions_erase_type & BIT(erase[i].idx))) + spi_nor_set_erase_type(&erase[i], 0, 0xFF); + spi_nor_region_mark_end(®ion[i - 1]); return 0; @@ -3007,7 +3212,7 @@ static int spi_nor_parse_smpt(struct spi_nor *nor, /* Read the Sector Map Parameter Table. */ len = smpt_header->length * sizeof(*smpt); - smpt = kzalloc(len, GFP_KERNEL); + smpt = kmalloc(len, GFP_KERNEL); if (!smpt) return -ENOMEM; @@ -3020,9 +3225,9 @@ static int spi_nor_parse_smpt(struct spi_nor *nor, for (i = 0; i < smpt_header->length; i++) smpt[i] = le32_to_cpu(smpt[i]); - sector_map = spi_nor_get_map_in_use(nor, smpt); - if (!sector_map) { - ret = -EINVAL; + sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length); + if (IS_ERR(sector_map)) { + ret = PTR_ERR(sector_map); goto out; } @@ -3037,6 +3242,191 @@ out: return ret; } +#define SFDP_4BAIT_DWORD_MAX 2 + +struct sfdp_4bait { + /* The hardware capability. */ + u32 hwcaps; + + /* + * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether + * the associated 4-byte address op code is supported. + */ + u32 supported_bit; +}; + +/** + * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table + * @nor: pointer to a 'struct spi_nor'. + * @param_header: pointer to the 'struct sfdp_parameter_header' describing + * the 4-Byte Address Instruction Table length and version. + * @params: pointer to the 'struct spi_nor_flash_parameter' to be. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_parse_4bait(struct spi_nor *nor, + const struct sfdp_parameter_header *param_header, + struct spi_nor_flash_parameter *params) +{ + static const struct sfdp_4bait reads[] = { + { SNOR_HWCAPS_READ, BIT(0) }, + { SNOR_HWCAPS_READ_FAST, BIT(1) }, + { SNOR_HWCAPS_READ_1_1_2, BIT(2) }, + { SNOR_HWCAPS_READ_1_2_2, BIT(3) }, + { SNOR_HWCAPS_READ_1_1_4, BIT(4) }, + { SNOR_HWCAPS_READ_1_4_4, BIT(5) }, + { SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) }, + { SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) }, + { SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) }, + }; + static const struct sfdp_4bait programs[] = { + { SNOR_HWCAPS_PP, BIT(6) }, + { SNOR_HWCAPS_PP_1_1_4, BIT(7) }, + { SNOR_HWCAPS_PP_1_4_4, BIT(8) }, + }; + static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = { + { 0u /* not used */, BIT(9) }, + { 0u /* not used */, BIT(10) }, + { 0u /* not used */, BIT(11) }, + { 0u /* not used */, BIT(12) }, + }; + struct spi_nor_pp_command *params_pp = params->page_programs; + struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_type *erase_type = map->erase_type; + u32 *dwords; + size_t len; + u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask; + int i, ret; + + if (param_header->major != SFDP_JESD216_MAJOR || + param_header->length < SFDP_4BAIT_DWORD_MAX) + return -EINVAL; + + /* Read the 4-byte Address Instruction Table. */ + len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX; + + /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */ + dwords = kmalloc(len, GFP_KERNEL); + if (!dwords) + return -ENOMEM; + + addr = SFDP_PARAM_HEADER_PTP(param_header); + ret = spi_nor_read_sfdp(nor, addr, len, dwords); + if (ret) + return ret; + + /* Fix endianness of the 4BAIT DWORDs. */ + for (i = 0; i < SFDP_4BAIT_DWORD_MAX; i++) + dwords[i] = le32_to_cpu(dwords[i]); + + /* + * Compute the subset of (Fast) Read commands for which the 4-byte + * version is supported. + */ + discard_hwcaps = 0; + read_hwcaps = 0; + for (i = 0; i < ARRAY_SIZE(reads); i++) { + const struct sfdp_4bait *read = &reads[i]; + + discard_hwcaps |= read->hwcaps; + if ((params->hwcaps.mask & read->hwcaps) && + (dwords[0] & read->supported_bit)) + read_hwcaps |= read->hwcaps; + } + + /* + * Compute the subset of Page Program commands for which the 4-byte + * version is supported. + */ + pp_hwcaps = 0; + for (i = 0; i < ARRAY_SIZE(programs); i++) { + const struct sfdp_4bait *program = &programs[i]; + + /* + * The 4 Byte Address Instruction (Optional) Table is the only + * SFDP table that indicates support for Page Program Commands. + * Bypass the params->hwcaps.mask and consider 4BAIT the biggest + * authority for specifying Page Program support. + */ + discard_hwcaps |= program->hwcaps; + if (dwords[0] & program->supported_bit) + pp_hwcaps |= program->hwcaps; + } + + /* + * Compute the subset of Sector Erase commands for which the 4-byte + * version is supported. + */ + erase_mask = 0; + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { + const struct sfdp_4bait *erase = &erases[i]; + + if (dwords[0] & erase->supported_bit) + erase_mask |= BIT(i); + } + + /* Replicate the sort done for the map's erase types in BFPT. */ + erase_mask = spi_nor_sort_erase_mask(map, erase_mask); + + /* + * We need at least one 4-byte op code per read, program and erase + * operation; the .read(), .write() and .erase() hooks share the + * nor->addr_width value. + */ + if (!read_hwcaps || !pp_hwcaps || !erase_mask) + goto out; + + /* + * Discard all operations from the 4-byte instruction set which are + * not supported by this memory. + */ + params->hwcaps.mask &= ~discard_hwcaps; + params->hwcaps.mask |= (read_hwcaps | pp_hwcaps); + + /* Use the 4-byte address instruction set. */ + for (i = 0; i < SNOR_CMD_READ_MAX; i++) { + struct spi_nor_read_command *read_cmd = ¶ms->reads[i]; + + read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode); + } + + /* 4BAIT is the only SFDP table that indicates page program support. */ + if (pp_hwcaps & SNOR_HWCAPS_PP) + spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP], + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4) + spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4], + SPINOR_OP_PP_1_1_4_4B, + SNOR_PROTO_1_1_4); + if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4) + spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4], + SPINOR_OP_PP_1_4_4_4B, + SNOR_PROTO_1_4_4); + + for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) { + if (erase_mask & BIT(i)) + erase_type[i].opcode = (dwords[1] >> + erase_type[i].idx * 8) & 0xFF; + else + spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF); + } + + /* + * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes() + * later because we already did the conversion to 4byte opcodes. Also, + * this latest function implements a legacy quirk for the erase size of + * Spansion memory. However this quirk is no longer needed with new + * SFDP compliant memories. + */ + nor->addr_width = 4; + nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT; + + /* fall through */ +out: + kfree(dwords); + return ret; +} + /** * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters. * @nor: pointer to a 'struct spi_nor' @@ -3125,7 +3515,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, if (err) goto exit; - /* Parse other parameter headers. */ + /* Parse optional parameter tables. */ for (i = 0; i < header.nph; i++) { param_header = ¶m_headers[i]; @@ -3134,12 +3524,25 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, err = spi_nor_parse_smpt(nor, param_header); break; + case SFDP_4BAIT_ID: + err = spi_nor_parse_4bait(nor, param_header, params); + break; + default: break; } - if (err) - goto exit; + if (err) { + dev_warn(dev, "Failed to parse optional parameter table: %04x\n", + SFDP_PARAM_HEADER_ID(param_header)); + /* + * Let's not drop all information we extracted so far + * if optional table parsers fail. In case of failing, + * each optional parser is responsible to roll back to + * the previously known spi_nor data. + */ + err = 0; + } } exit: @@ -3148,17 +3551,17 @@ exit: } static int spi_nor_init_params(struct spi_nor *nor, - const struct flash_info *info, struct spi_nor_flash_parameter *params) { struct spi_nor_erase_map *map = &nor->erase_map; + const struct flash_info *info = nor->info; u8 i, erase_mask; /* Set legacy flash parameters as default. */ memset(params, 0, sizeof(*params)); /* Set SPI NOR sizes. */ - params->size = info->sector_size * info->n_sectors; + params->size = (u64)info->sector_size * info->n_sectors; params->page_size = info->page_size; /* (Fast) Read settings. */ @@ -3223,6 +3626,7 @@ static int spi_nor_init_params(struct spi_nor *nor, params->quad_enable = macronix_quad_enable; break; + case SNOR_MFR_ST: case SNOR_MFR_MICRON: break; @@ -3250,68 +3654,20 @@ static int spi_nor_init_params(struct spi_nor *nor, memcpy(&sfdp_params, params, sizeof(sfdp_params)); memcpy(&prev_map, &nor->erase_map, sizeof(prev_map)); - if (spi_nor_parse_sfdp(nor, &sfdp_params)) + if (spi_nor_parse_sfdp(nor, &sfdp_params)) { + nor->addr_width = 0; + nor->flags &= ~SNOR_F_4B_OPCODES; /* restore previous erase map */ memcpy(&nor->erase_map, &prev_map, sizeof(nor->erase_map)); - else + } else { memcpy(params, &sfdp_params, sizeof(*params)); + } } return 0; } -static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size) -{ - size_t i; - - for (i = 0; i < size; i++) - if (table[i][0] == (int)hwcaps) - return table[i][1]; - - return -EINVAL; -} - -static int spi_nor_hwcaps_read2cmd(u32 hwcaps) -{ - static const int hwcaps_read2cmd[][2] = { - { SNOR_HWCAPS_READ, SNOR_CMD_READ }, - { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST }, - { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR }, - { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 }, - { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 }, - { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 }, - { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR }, - { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 }, - { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 }, - { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 }, - { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR }, - { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 }, - { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 }, - { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 }, - { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR }, - }; - - return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd, - ARRAY_SIZE(hwcaps_read2cmd)); -} - -static int spi_nor_hwcaps_pp2cmd(u32 hwcaps) -{ - static const int hwcaps_pp2cmd[][2] = { - { SNOR_HWCAPS_PP, SNOR_CMD_PP }, - { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 }, - { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 }, - { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 }, - { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 }, - { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 }, - { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 }, - }; - - return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd, - ARRAY_SIZE(hwcaps_pp2cmd)); -} - static int spi_nor_select_read(struct spi_nor *nor, const struct spi_nor_flash_parameter *params, u32 shared_hwcaps) @@ -3464,7 +3820,7 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size) return 0; } -static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info, +static int spi_nor_setup(struct spi_nor *nor, const struct spi_nor_flash_parameter *params, const struct spi_nor_hwcaps *hwcaps) { @@ -3507,7 +3863,7 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info, } /* Select the Sector Erase command. */ - err = spi_nor_select_erase(nor, info->sector_size); + err = spi_nor_select_erase(nor, nor->info->sector_size); if (err) { dev_err(nor->dev, "can't select erase settings supported by both the SPI controller and memory.\n"); @@ -3550,9 +3906,7 @@ static int spi_nor_init(struct spi_nor *nor) } } - if ((nor->addr_width == 4) && - (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) && - !(nor->info->flags & SPI_NOR_4B_OPCODES)) { + if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) { /* * If the RESET# pin isn't hooked up properly, or the system * otherwise doesn't perform a reset command in the boot @@ -3562,7 +3916,7 @@ static int spi_nor_init(struct spi_nor *nor) */ WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET, "enabling reset hack; may not recover from unexpected reboots\n"); - set_4byte(nor, nor->info, 1); + set_4byte(nor, true); } return 0; @@ -3584,14 +3938,24 @@ static void spi_nor_resume(struct mtd_info *mtd) void spi_nor_restore(struct spi_nor *nor) { /* restore the addressing mode */ - if ((nor->addr_width == 4) && - (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) && - !(nor->info->flags & SPI_NOR_4B_OPCODES) && - (nor->flags & SNOR_F_BROKEN_RESET)) - set_4byte(nor, nor->info, 0); + if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) && + nor->flags & SNOR_F_BROKEN_RESET) + set_4byte(nor, false); } EXPORT_SYMBOL_GPL(spi_nor_restore); +static const struct flash_info *spi_nor_match_id(const char *name) +{ + const struct flash_info *id = spi_nor_ids; + + while (id->name) { + if (!strcmp(name, id->name)) + return id; + id++; + } + return NULL; +} + int spi_nor_scan(struct spi_nor *nor, const char *name, const struct spi_nor_hwcaps *hwcaps) { @@ -3644,6 +4008,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, } } + nor->info = info; + mutex_init(&nor->lock); /* @@ -3655,7 +4021,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, nor->flags |= SNOR_F_READY_XSR_RDY; /* Parse the Serial Flash Discoverable Parameters table. */ - ret = spi_nor_init_params(nor, info, ¶ms); + ret = spi_nor_init_params(nor, ¶ms); if (ret) return ret; @@ -3671,8 +4037,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, mtd->_resume = spi_nor_resume; /* NOR protection support for STmicro/Micron chips and similar */ - if (JEDEC_MFR(info) == SNOR_MFR_MICRON || - info->flags & SPI_NOR_HAS_LOCK) { + if (JEDEC_MFR(info) == SNOR_MFR_ST || + JEDEC_MFR(info) == SNOR_MFR_MICRON || + info->flags & SPI_NOR_HAS_LOCK) { nor->flash_lock = stm_lock; nor->flash_unlock = stm_unlock; nor->flash_is_locked = stm_is_locked; @@ -3731,7 +4098,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, * - set the SPI protocols for register and memory accesses. * - set the Quad Enable bit if needed (required by SPI x-y-4 protos). */ - ret = spi_nor_setup(nor, info, ¶ms, hwcaps); + ret = spi_nor_setup(nor, ¶ms, hwcaps); if (ret) return ret; @@ -3742,13 +4109,18 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, } else if (mtd->size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ nor->addr_width = 4; - if (JEDEC_MFR(info) == SNOR_MFR_SPANSION || - info->flags & SPI_NOR_4B_OPCODES) - spi_nor_set_4byte_opcodes(nor, info); } else { nor->addr_width = 3; } + if (info->flags & SPI_NOR_4B_OPCODES || + (JEDEC_MFR(info) == SNOR_MFR_SPANSION && mtd->size > SZ_16M)) + nor->flags |= SNOR_F_4B_OPCODES; + + if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES && + !(nor->flags & SNOR_F_HAS_4BAIT)) + spi_nor_set_4byte_opcodes(nor); + if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { dev_err(dev, "address width is too large: %u\n", nor->addr_width); @@ -3756,13 +4128,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, } if (info->flags & SPI_S3AN) { - ret = s3an_nor_scan(info, nor); + ret = s3an_nor_scan(nor); if (ret) return ret; } /* Send all the required SPI flash commands to initialize device */ - nor->info = info; ret = spi_nor_init(nor); if (ret) return ret; @@ -3790,19 +4161,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, } EXPORT_SYMBOL_GPL(spi_nor_scan); -static const struct flash_info *spi_nor_match_id(const char *name) -{ - const struct flash_info *id = spi_nor_ids; - - while (id->name) { - if (!strcmp(name, id->name)) - return id; - id++; - } - return NULL; -} - -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>"); MODULE_AUTHOR("Mike Lavender"); MODULE_DESCRIPTION("framework for SPI NOR"); |