diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 153 |
1 files changed, 0 insertions, 153 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0b3ea213b610..b686dab54ec6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -287,27 +287,6 @@ config BMAC To compile this driver as a module, choose M here: the module will be called bmac. -config ARIADNE - tristate "Ariadne support" - depends on ZORRO - help - If you have a Village Tronic Ariadne Ethernet adapter, say Y. - Otherwise, say N. - - To compile this driver as a module, choose M here: the module - will be called ariadne. - -config A2065 - tristate "A2065 support" - depends on ZORRO - select CRC32 - help - If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise, - say N. - - To compile this driver as a module, choose M here: the module - will be called a2065. - config HYDRA tristate "Hydra support" depends on ZORRO @@ -387,16 +366,6 @@ config MACMACE say Y and read the Ethernet-HOWTO, available from <http://www.tldp.org/docs.html#howto>. -config MVME147_NET - tristate "MVME147 (Lance) Ethernet support" - depends on MVME147 - select CRC32 - help - Support for the on-board Ethernet interface on the Motorola MVME147 - single-board computer. Say Y here to include the - driver for this chip in your kernel. - To compile this driver as a module, choose M here. - config MVME16x_NET tristate "MVME16x Ethernet support" depends on MVME16x @@ -415,27 +384,6 @@ config BVME6000_NET in your kernel. To compile this driver as a module, choose M here. -config ATARILANCE - tristate "Atari Lance support" - depends on ATARI - help - Say Y to include support for several Atari Ethernet adapters based - on the AMD Lance chipset: RieblCard (with or without battery), or - PAMCard VME (also the version by Rhotron, with different addresses). - -config SUN3LANCE - tristate "Sun3/Sun3x on-board LANCE support" - depends on SUN3 || SUN3X - help - Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80) - featured an AMD Lance 10Mbit Ethernet controller on board; say Y - here to compile in the Linux driver for this and enable Ethernet. - General Linux information on the Sun 3 and 3x series (now - discontinued) is at - <http://www.angelfire.com/ca2/tech68k/sun3.html>. - - If you're not building a kernel for a Sun 3, say N. - config SUN3_82586 bool "Sun3 on-board Intel 82586 support" depends on SUN3 @@ -445,14 +393,6 @@ config SUN3_82586 that this driver does not support 82586-based adapters on additional VME boards. -config HPLANCE - bool "HP on-board LANCE support" - depends on DIO - select CRC32 - help - If you want to use the builtin "LANCE" Ethernet controller on an - HP300 machine, say Y here. - config LASI_82596 tristate "Lasi ethernet" depends on GSC @@ -487,15 +427,6 @@ config XTENSA_XT2000_SONIC help This is the driver for the onboard card of the Xtensa XT2000 board. -config MIPS_AU1X00_ENET - tristate "MIPS AU1000 Ethernet support" - depends on MIPS_ALCHEMY - select PHYLIB - select CRC32 - help - If you have an Alchemy Semi AU1X00 based system - say Y. Otherwise, say N. - config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" depends on PCI && SGI_IP27 @@ -545,19 +476,6 @@ config SH_ETH This driver supporting CPUs are: - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757. -config SUNLANCE - tristate "Sun LANCE support" - depends on SBUS - select CRC32 - help - This driver supports the "le" interface present on all 32-bit Sparc - systems, on some older Ultra systems and as an Sbus option. These - cards are based on the AMD Lance chipset, which is better known - via the NE2100 cards. - - To compile this driver as a module, choose M here: the module - will be called sunlance. - config HAPPYMEAL tristate "Sun Happy Meal 10/100baseT support" depends on SBUS || PCI @@ -673,18 +591,6 @@ config ELMC_II To compile this driver as a module, choose M here. The module will be called 3c527. -config LANCE - tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" - depends on ISA && ISA_DMA_API - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are - of this type. - - To compile this driver as a module, choose M here: the module - will be called lance. This is recommended. - config NET_VENDOR_SMC bool "Western Digital/SMC cards" depends on ISA || MCA || EISA || MAC @@ -1020,17 +926,6 @@ config NI52 To compile this driver as a module, choose M here. The module will be called ni52. -config NI65 - tristate "NI6510 support" - depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called ni65. - config DNET tristate "Dave ethernet support (DNET)" depends on NET_ETHERNET && HAS_IOMEM @@ -1056,19 +951,6 @@ config AT1700 To compile this driver as a module, choose M here. The module will be called at1700. -config DEPCA - tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support" - depends on ISA || EISA || MCA - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto> as well as - <file:drivers/net/depca.c>. - - To compile this driver as a module, choose M here. The module - will be called depca. - config HP100 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support" depends on ISA || EISA || PCI @@ -1287,32 +1169,6 @@ config NET_PCI will be asked for your specific card in the following questions. If you are unsure, say Y. -config PCNET32 - tristate "AMD PCnet32 PCI support" - depends on NET_PCI && PCI - select CRC32 - select MII - help - If you have a PCnet32 or PCnetPCI based network (Ethernet) card, - answer Y here and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called pcnet32. - -config AMD8111_ETH - tristate "AMD 8111 (new PCI lance) support" - depends on NET_PCI && PCI - select CRC32 - select MII - help - If you have an AMD 8111-based PCI lance ethernet card, - answer Y here and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called amd8111e. - config ADAPTEC_STARFIRE tristate "Adaptec Starfire/DuraLAN support" depends on NET_PCI && PCI @@ -1834,15 +1690,6 @@ config SGISEEQ Say Y here if you have an Seeq based Ethernet network card. This is used in many Silicon Graphics machines. -config DECLANCE - tristate "DEC LANCE ethernet controller support" - depends on MACH_DECSTATION - select CRC32 - help - This driver is for the series of Ethernet controllers produced by - DEC (now Compaq) based on the AMD Lance chipset, including the - DEPCA series. (This chipset is better known via the NE2100 cards.) - config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on M523x || M527x || M5272 || M528x || M520x || M532x || \ |