diff options
Diffstat (limited to 'drivers/net/bnx2x/bnx2x_hsi.h')
| -rw-r--r-- | drivers/net/bnx2x/bnx2x_hsi.h | 130 |
1 files changed, 124 insertions, 6 deletions
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index fd1f29e0317d..60d141cd9950 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -78,6 +78,8 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_LED_PHY11 0x000b0000 #define SHARED_HW_CFG_LED_MAC4 0x000c0000 #define SHARED_HW_CFG_LED_PHY8 0x000d0000 +#define SHARED_HW_CFG_LED_EXTPHY1 0x000e0000 + #define SHARED_HW_CFG_AN_ENABLE_MASK 0x3f000000 #define SHARED_HW_CFG_AN_ENABLE_SHIFT 24 @@ -120,6 +122,23 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_FAN_FAILURE_DISABLED 0x00080000 #define SHARED_HW_CFG_FAN_FAILURE_ENABLED 0x00100000 + /* Set the MDC/MDIO access for the first external phy */ +#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK 0x1C000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT 26 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_PHY_TYPE 0x00000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC0 0x04000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1 0x08000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH 0x0c000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED 0x10000000 + + /* Set the MDC/MDIO access for the second external phy */ +#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK 0xE0000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT 29 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_PHY_TYPE 0x00000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_EMAC0 0x20000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_EMAC1 0x40000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_BOTH 0x60000000 +#define SHARED_HW_CFG_MDC_MDIO_ACCESS2_SWAPPED 0x80000000 u32 power_dissipated; /* 0x11c */ #define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000 #define SHARED_HW_CFG_POWER_DIS_CMN_SHIFT 24 @@ -221,7 +240,88 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ u16 xgxs_config_tx[4]; /* 0x1A0 */ - u32 Reserved1[64]; /* 0x1A8 */ + u32 Reserved1[57]; /* 0x1A8 */ + u32 speed_capability_mask2; /* 0x28C */ +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_10M_FULL 0x00000001 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3__ 0x00000002 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3___ 0x00000004 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_100M_FULL 0x00000008 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_1G 0x00000010 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_2_DOT_5G 0x00000020 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_10G 0x00000040 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_12G 0x00000080 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_12_DOT_5G 0x00000100 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_13G 0x00000200 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_15G 0x00000400 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_16G 0x00000800 + +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_MASK 0xFFFF0000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_SHIFT 16 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_10M_FULL 0x00010000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0__ 0x00020000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0___ 0x00040000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_100M_FULL 0x00080000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_1G 0x00100000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_2_DOT_5G 0x00200000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_10G 0x00400000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_12G 0x00800000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_12_DOT_5G 0x01000000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_13G 0x02000000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_15G 0x04000000 +#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_16G 0x08000000 + + /* In the case where two media types (e.g. copper and fiber) are + present and electrically active at the same time, PHY Selection + will determine which of the two PHYs will be designated as the + Active PHY and used for a connection to the network. */ + u32 multi_phy_config; /* 0x290 */ +#define PORT_HW_CFG_PHY_SELECTION_MASK 0x00000007 +#define PORT_HW_CFG_PHY_SELECTION_SHIFT 0 +#define PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT 0x00000000 +#define PORT_HW_CFG_PHY_SELECTION_FIRST_PHY 0x00000001 +#define PORT_HW_CFG_PHY_SELECTION_SECOND_PHY 0x00000002 +#define PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY 0x00000003 +#define PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY 0x00000004 + + /* When enabled, all second phy nvram parameters will be swapped + with the first phy parameters */ +#define PORT_HW_CFG_PHY_SWAPPED_MASK 0x00000008 +#define PORT_HW_CFG_PHY_SWAPPED_SHIFT 3 +#define PORT_HW_CFG_PHY_SWAPPED_DISABLED 0x00000000 +#define PORT_HW_CFG_PHY_SWAPPED_ENABLED 0x00000008 + + + /* Address of the second external phy */ + u32 external_phy_config2; /* 0x294 */ +#define PORT_HW_CFG_XGXS_EXT_PHY2_ADDR_MASK 0x000000FF +#define PORT_HW_CFG_XGXS_EXT_PHY2_ADDR_SHIFT 0 + + /* The second XGXS external PHY type */ +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_MASK 0x0000FF00 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_SHIFT 8 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_DIRECT 0x00000000 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8071 0x00000100 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8072 0x00000200 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8073 0x00000300 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8705 0x00000400 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8706 0x00000500 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8726 0x00000600 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8481 0x00000700 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_SFX7101 0x00000800 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8727 0x00000900 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8727_NOC 0x00000a00 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84823 0x00000b00 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54640 0x00000c00 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84833 0x00000d00 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_FAILURE 0x0000fd00 +#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_NOT_CONN 0x0000ff00 + + /* 4 times 16 bits for all 4 lanes. For some external PHYs (such as + 8706, 8726 and 8727) not all 4 values are needed. */ + u16 xgxs_config2_rx[4]; /* 0x296 */ + u16 xgxs_config2_tx[4]; /* 0x2A0 */ u32 lane_config; #define PORT_HW_CFG_LANE_SWAP_CFG_MASK 0x0000ffff @@ -515,10 +615,17 @@ struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ #define PORT_FEATURE_FLOW_CONTROL_NONE 0x00000400 /* The default for MCP link configuration, - uses the same defines as link_config */ + uses the same defines as link_config */ u32 mfw_wol_link_cfg; + /* The default for the driver of the second external phy, + uses the same defines as link_config */ + u32 link_config2; /* 0x47C */ + + /* The default for MCP of the second external phy, + uses the same defines as link_config */ + u32 mfw_wol_link_cfg2; /* 0x480 */ - u32 reserved[19]; + u32 Reserved2[17]; /* 0x484 */ }; @@ -686,8 +793,14 @@ struct drv_func_mb { * The optic module verification commands require bootcode * v5.0.6 or later */ -#define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000 -#define REQ_BC_VER_4_VRFY_OPT_MDL 0x00050006 +#define DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL 0xa0000000 +#define REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL 0x00050006 + /* + * The specific optic module verification command requires bootcode + * v5.2.12 or later + */ +#define DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL 0xa1000000 +#define REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL 0x00050234 #define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000 #define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000 @@ -922,7 +1035,12 @@ struct shmem2_region { #define SHMEM_DCC_SUPPORT_SET_PROTOCOL_TLV 0x00000040 #define SHMEM_DCC_SUPPORT_SET_PRIORITY_TLV 0x00000080 #define SHMEM_DCC_SUPPORT_DEFAULT SHMEM_DCC_SUPPORT_NONE - + u32 ext_phy_fw_version2[PORT_MAX]; + /* + * For backwards compatibility, if the mf_cfg_addr does not exist + * (the size filed is smaller than 0xc) the mf_cfg resides at the + * end of struct shmem_region + */ }; |