diff options
Diffstat (limited to 'drivers/net/can/sja1000/Kconfig')
| -rw-r--r-- | drivers/net/can/sja1000/Kconfig | 79 |
1 files changed, 45 insertions, 34 deletions
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 6b72da2f18a6..32d242dc0d9f 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -1,26 +1,18 @@ # SPDX-License-Identifier: GPL-2.0-only + menuconfig CAN_SJA1000 tristate "Philips/NXP SJA1000 devices" depends on HAS_IOMEM if CAN_SJA1000 -config CAN_SJA1000_ISA - tristate "ISA Bus based legacy SJA1000 driver" - ---help--- - This driver adds legacy support for SJA1000 chips connected to - the ISA bus using I/O port, memory mapped or indirect access. - -config CAN_SJA1000_PLATFORM - tristate "Generic Platform Bus based SJA1000 driver" +config CAN_EMS_PCI + tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" + depends on PCI ---help--- - This driver adds support for the SJA1000 chips connected to - the "platform bus" (Linux abstraction for directly to the - processor attached devices). Which can be found on various - boards from Phytec (http://www.phytec.de) like the PCM027, - PCM038. It also provides the OpenFirmware "platform bus" found - on embedded systems with OpenFirmware bindings, e.g. if you - have a PowerPC based system you may want to enable this option. + This driver is for the one, two or four channel CPC-PCI, + CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche + (http://www.ems-wuensche.de). config CAN_EMS_PCMCIA tristate "EMS CPC-CARD Card" @@ -29,23 +21,22 @@ config CAN_EMS_PCMCIA This driver is for the one or two channel CPC-CARD cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). -config CAN_EMS_PCI - tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" +config CAN_F81601 + tristate "Fintek F81601 PCIE to 2 CAN Controller" depends on PCI - ---help--- - This driver is for the one, two or four channel CPC-PCI, - CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche - (http://www.ems-wuensche.de). + help + This driver adds support for Fintek F81601 PCIE to 2 CAN + Controller. It had internal 24MHz clock source, but it can + be changed by manufacturer. Use modinfo to get usage for + parameters. Visit http://www.fintek.com.tw to get more + information. -config CAN_PEAK_PCMCIA - tristate "PEAK PCAN-PC Card" - depends on PCMCIA - depends on HAS_IOPORT_MAP +config CAN_KVASER_PCI + tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" + depends on PCI ---help--- - This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) - from PEAK-System (http://www.peak-system.com). To compile this - driver as a module, choose M here: the module will be called - peak_pcmcia. + This driver is for the PCIcanx and PCIcan cards (1, 2 or + 4 channel) from Kvaser (http://www.kvaser.com). config CAN_PEAK_PCI tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" @@ -66,12 +57,15 @@ config CAN_PEAK_PCIEC Technik. This will also automatically select I2C and I2C_ALGO configuration options. -config CAN_KVASER_PCI - tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" - depends on PCI +config CAN_PEAK_PCMCIA + tristate "PEAK PCAN-PC Card" + depends on PCMCIA + depends on HAS_IOPORT_MAP ---help--- - This driver is for the PCIcanx and PCIcan cards (1, 2 or - 4 channel) from Kvaser (http://www.kvaser.com). + This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) + from PEAK-System (http://www.peak-system.com). To compile this + driver as a module, choose M here: the module will be called + peak_pcmcia. config CAN_PLX_PCI tristate "PLX90xx PCI-bridge based Cards" @@ -91,6 +85,23 @@ config CAN_PLX_PCI - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) - ASEM CAN raw - 2 isolated CAN channels (www.asem.it) +config CAN_SJA1000_ISA + tristate "ISA Bus based legacy SJA1000 driver" + ---help--- + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + +config CAN_SJA1000_PLATFORM + tristate "Generic Platform Bus based SJA1000 driver" + ---help--- + This driver adds support for the SJA1000 chips connected to + the "platform bus" (Linux abstraction for directly to the + processor attached devices). Which can be found on various + boards from Phytec (http://www.phytec.de) like the PCM027, + PCM038. It also provides the OpenFirmware "platform bus" found + on embedded systems with OpenFirmware bindings, e.g. if you + have a PowerPC based system you may want to enable this option. + config CAN_TSCAN1 tristate "TS-CAN1 PC104 boards" depends on ISA |